Nicolas Boichat 3fecdbdcf9 chell: Enable CONFIG_LTO ...

Saves about 4K of flash space. Note that LTO has been enabled
on glados for a long time, so hopefully this is safe.

build/chell/RO/ec.RO.flat shrank by 4096 bytes: (106200 to 102104)
build/chell/RW/ec.RW.flat shrank by 4264 bytes: (105988 to 101724)

BRANCH=none
BUG=chromium:798914
TEST=Flash both chell and chell_pd, system boots to OS, keyboard
     works, charging works.

Change-Id: Id97f2e73959ced16d6579f6c05f3ce4cd21f4062
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/848594
Reviewed-by: Randall Spangler <rspangler@chromium.org>

2018-01-04 21:52:05 -08:00

..

bds

Remove Makefile symlinks under board directory

2016-07-09 01:40:47 -07:00

chell

chell: Enable CONFIG_LTO

2018-01-04 21:52:05 -08:00

coffeecake

coffeecake: Change host high pullup from Rp1500 to Rp3000

2017-11-29 12:22:22 -08:00

coral

coral: disable tablet mode interrupt for clamshell models.

2017-11-30 07:09:40 -08:00

cr50

cr50: add board property deep sleep and detect ap flags

2017-12-12 03:57:20 -08:00

dingdong

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

discovery

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

discovery-stm32f072

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

elm

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

eve

buttons: Make buttons[] common.

2017-11-17 20:18:38 -08:00

eve_fp

eve_fp: enable %li printf format

2017-12-25 17:17:25 -08:00

fizz

fizz/nami: Drop CONFIG_THERMISTOR_NCP15WB

2017-12-21 22:50:38 -08:00

glados

buttons: Make buttons[] common.

2017-11-17 20:18:38 -08:00

glados_pd

Treat SYSTEM_IMAGE_RW_B also as RW copy

2017-09-09 02:26:16 -07:00

glkrvp

glkrvp: Enable discharge on AC config

2017-12-28 14:50:30 -08:00

grunt

grunt: Use PPC for USB PD

2017-12-13 12:33:40 -08:00

hadoken

g: CONFIG_FLASH should be optional

2016-10-02 15:19:21 -07:00

hammer

charge_state_v2: Add charge_set_output_current_limit function

2018-01-04 21:52:01 -08:00

hoho

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

host

buttons: Make buttons[] common.

2017-11-17 20:18:38 -08:00

it83xx_evb

it83xx: adc: add support ADC13-16

2017-12-12 01:05:29 -08:00

jerry

jerry: Use HOSTCMD_ALIGNED instead of GPIO_SHORTNAMES

2017-11-16 18:45:38 -08:00

kahlee

kahlee: Switch thermal I2C over to 1.8V

2018-01-03 16:54:31 -08:00

kevin

host_events: Bump up host events and masks to 64-bit

2017-11-21 18:53:35 -08:00

nami

Nami: Update board directory

2018-01-02 15:48:21 -08:00

nautilus

nautilus/poppy: Drop comment about thermistor

2017-12-24 07:17:56 -08:00

npcx7_evb

npcx7_evb: change the default setting of npcx7 evb

2017-09-26 22:35:19 -07:00

npcx_evb

npcx7_evb: Add initial board driver of npcx7 ec evb.

2017-05-18 06:03:51 -07:00

npcx_evb_arm

npcx7_evb: Add initial board driver of npcx7 ec evb.

2017-05-18 06:03:51 -07:00

nucleo-f072rb

eCTS: Add nested interrupt test (Low->High)

2016-11-09 23:26:30 -08:00

nucleo-f411re

cleanup: motion_sense: Remove driver data structure externs

2017-06-15 23:54:00 -07:00

oak

board: Set BM160 Accel and Gyro to identical matrix.

2017-12-01 22:45:32 -08:00

pdeval-stm32f072

pd: Move PD_DEFAULT_STATE to a common define in usb_pd.h

2017-01-26 16:10:30 +00:00

plankton

charge_manager: Consider port in source PDO.

2017-08-11 20:10:20 -07:00

polyberry

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

poppy

poppy: Disable PULL_UP on BOARD_VERSION4

2018-01-03 22:43:03 -08:00

rainier

config: Add CONFIG_BUTTON_TRIGGERED_RECOVERY.

2017-12-18 22:55:02 -08:00

reef

chipset: Introduce CHIPSET_STATE_ANY_SUSPEND

2017-11-28 15:44:19 -08:00

reef_it8320

it83xx: adc: add support ADC13-16

2017-12-12 01:05:29 -08:00

rowan

config: Add CONFIG_BUTTON_TRIGGERED_RECOVERY.

2017-12-18 22:55:02 -08:00

samus

samus: Change the way host_set_single_event is used

2017-11-15 13:23:34 -08:00

samus_pd

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

scarlet

charge_state_v2: Add charge_set_output_current_limit function

2018-01-04 21:52:01 -08:00

servo_micro

servo_micro: default to UART3 enabled

2017-12-07 05:09:29 -08:00

servo_v4

usb_i2c: Remove usb_i2c_board_enable/disable

2017-11-20 23:25:45 -08:00

soraka

poppy/soraka: Basic LED support

2017-05-18 06:03:52 -07:00

stm32f446e-eval

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

stm32l476g-eval

eCTS: Expedite flashing time

2017-06-28 21:50:51 -07:00

strago

buttons: Make buttons[] common.

2017-11-17 20:18:38 -08:00

sweetberry

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

tigertail

usb_i2c: Remove usb_i2c_board_enable/disable

2017-11-20 23:25:45 -08:00

twinkie

twinkie: clean-up disabled SNIFFER_HEADER_V2 code

2017-10-31 03:54:43 -07:00

wheatley

wheatly: Disable console commands to free up flash space

2017-12-06 01:08:22 -08:00

zinger

Mark reset and panic functions as noreturn

2017-11-07 15:25:17 -08:00

zoombini

meowth: zoombini: Add support for OPT3001.

2018-01-04 19:17:57 -08:00

chell_pd

chell: Add EC/PD configuration for chell board

2015-10-12 13:15:48 -07:00

gru

gru: Initial mainboard commit

2016-05-04 16:15:02 -07:00

meowth

Meowth: Added initial board file.

2017-11-15 20:21:12 -08:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

oak_pd

oak_pd: change oak_pd to be a sym link to glados_pd

2015-11-04 07:08:35 -08:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00

staff

hammer: Add staff board

2017-05-16 07:47:05 -07:00

wand

wand: Add wand board

2017-12-20 05:49:34 -08:00

whiskers

board: Add support for whiskers board

2017-11-09 16:43:54 -08:00