Vijay Hiremath cab93b613b glkrvp: Allow system to boot using DC Jack ...

There are two Type-C ports and a DC Jack on GLKRVP. Added code
to allow system to boot from DC Jack also. This helps to boot
the device without Type-C connector during early stage of
software development.

BUG=b:69005234
BRANCH=glkrvp
TEST=GLKRVP can boot to OS without battery and DC Jack attached.
     Also VBATA is set to battery voltage max.
     When DC-Jack is present Type-C port is not enabled and
     vice-versa.

Change-Id: I0fe5631c40490c56fba6ed5f3ad7ba7f5248460a
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/757874
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>

2017-11-10 09:16:35 -08:00

..

bds

Remove Makefile symlinks under board directory

2016-07-09 01:40:47 -07:00

chell

charge_ramp: Move ramp allowed / ilim callbacks to common code

2017-10-06 13:47:12 -07:00

coral

Coral: Fix LED name for factory control led by ectool

2017-11-09 11:53:14 -08:00

cr50

cr50: add rollback command

2017-10-27 21:54:37 -07:00

dingdong

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

discovery

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

discovery-stm32f072

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

elm

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

eve

bd9995x: Use fixed PD-port-to-VBUS/VCC mapping

2017-11-07 12:17:43 -08:00

eve_fp

eve_fp: add more fingerprint host commands

2017-05-23 05:57:13 -07:00

fizz

Fizz: Blink LED faster when requesting more power

2017-11-08 11:47:57 -08:00

glados

charge_ramp: Move ramp allowed / ilim callbacks to common code

2017-10-06 13:47:12 -07:00

glados_pd

Treat SYSTEM_IMAGE_RW_B also as RW copy

2017-09-09 02:26:16 -07:00

glkrvp

glkrvp: Allow system to boot using DC Jack

2017-11-10 09:16:35 -08:00

grunt

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

hadoken

g: CONFIG_FLASH should be optional

2016-10-02 15:19:21 -07:00

hammer

board: Add support for whiskers board

2017-11-09 16:43:54 -08:00

hoho

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

honeybuns

usb: Cleanup headers

2017-03-16 11:25:50 -07:00

host

charge_ramp: Ramp USB-C DTS sources

2017-10-19 12:56:42 -07:00

it83xx_evb

it83xx: pwm: support PWM_CONFIG_DSLEEP config flag

2017-11-09 19:16:26 -08:00

jerry

power: Add flags parameter to power_signal_info

2017-10-03 14:26:09 -07:00

kahlee

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

kevin

gru: Remove flashinfo command for RAM savings

2017-11-09 19:16:33 -08:00

nautilus

nautilus: Enable CONFIG_BATTERY_HW_PRESENT_CUSTOM

2017-11-03 13:52:44 -07:00

nefario

cleanup: Remove HOOK_INIT task synchronization

2017-11-09 00:38:10 -08:00

npcx7_evb

npcx7_evb: change the default setting of npcx7 evb

2017-09-26 22:35:19 -07:00

npcx_evb

npcx7_evb: Add initial board driver of npcx7 ec evb.

2017-05-18 06:03:51 -07:00

npcx_evb_arm

npcx7_evb: Add initial board driver of npcx7 ec evb.

2017-05-18 06:03:51 -07:00

nucleo-f072rb

eCTS: Add nested interrupt test (Low->High)

2016-11-09 23:26:30 -08:00

nucleo-f411re

cleanup: motion_sense: Remove driver data structure externs

2017-06-15 23:54:00 -07:00

oak

charge_ramp: Move ramp allowed / ilim callbacks to common code

2017-10-06 13:47:12 -07:00

pdeval-stm32f072

pd: Move PD_DEFAULT_STATE to a common define in usb_pd.h

2017-01-26 16:10:30 +00:00

plankton

charge_manager: Consider port in source PDO.

2017-08-11 20:10:20 -07:00

polyberry

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

poppy

poppy/soraka: set attenuation_factor of opt3001 to 1.

2017-11-09 21:46:04 -08:00

rainier

rainier: initial mainboard

2017-11-09 11:53:15 -08:00

reef

bd9995x: Use fixed PD-port-to-VBUS/VCC mapping

2017-11-07 12:17:43 -08:00

reef_it8320

bd9995x: Use fixed PD-port-to-VBUS/VCC mapping

2017-11-07 12:17:43 -08:00

rowan

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

samus

Fizz: Modify thermal table

2017-11-06 13:48:38 -08:00

samus_pd

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

scarlet

cleanup: Remove HOOK_INIT task synchronization

2017-11-09 00:38:10 -08:00

servo_micro

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

servo_v4

servo_v4: remove gpio endpoint.

2017-11-04 00:31:47 -07:00

soraka

poppy/soraka: Basic LED support

2017-05-18 06:03:52 -07:00

stm32f446e-eval

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

stm32l476g-eval

eCTS: Expedite flashing time

2017-06-28 21:50:51 -07:00

strago

pd: Move *_set_input_current() to common code

2017-10-05 21:24:46 -07:00

sweetberry

chip/stm32/usb: Replace reset handler by generic event handler

2017-08-16 04:03:24 -07:00

tigertail

chip/stm32/usart: Add flags to usart_config

2017-10-18 08:30:16 -07:00

twinkie

twinkie: clean-up disabled SNIFFER_HEADER_V2 code

2017-10-31 03:54:43 -07:00

wheatley

pd: Move *_set_input_current() to common code

2017-10-05 21:24:46 -07:00

zinger

Mark reset and panic functions as noreturn

2017-11-07 15:25:17 -08:00

zoombini

charge_manager: Enter safe mode at boot

2017-11-02 23:21:52 -07:00

chell_pd

chell: Add EC/PD configuration for chell board

2015-10-12 13:15:48 -07:00

gru

gru: Initial mainboard commit

2016-05-04 16:15:02 -07:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

oak_pd

oak_pd: change oak_pd to be a sym link to glados_pd

2015-11-04 07:08:35 -08:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00

staff

hammer: Add staff board

2017-05-16 07:47:05 -07:00

whiskers

board: Add support for whiskers board

2017-11-09 16:43:54 -08:00