Alec Berg 8b0fe91407 pd: samus: ryu: add back in Vconn support correctly ...

Add support for enabling Vconn on Raiden ports by defining
CONFIG_USBC_VCONN. This is enabled by default for ryu, samus,
and fruitpie.

BUG=chrome-os-partner:30445
BRANCH=samus
TEST=Load onto samus. Make sure we can still charge from zinger.
Plug in type-A to type-C adapter with pulldown and see that samus
becomes power source. Do a gpioget and verify that only one VCONN
GPIO is enabled (low), and the VCONN that is enabled is opposite of
the polarity queried by pd 1 state. Try both ports, both polarities
and make sure the correct VCONN gpio is enabled.

Change-Id: Icea4c18b9c813cf7e8e21fd4f455bbd5fb4dbc91
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222850
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2014-10-15 00:09:32 +00:00

..

auron

Auron: Initial EC commit

2014-08-20 02:12:53 +00:00

bds

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

big

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

dingdong

pd: dingdong: Add displayport alternate mode.

2014-10-11 02:22:41 +00:00

discovery

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

discovery-stm32f072

discovery-stm32f072: discovery USB GPIO test

2014-10-14 23:59:15 +00:00

falco

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

firefly

usb_pd: Add port parameter to pd_set_input_current_limit

2014-10-10 02:43:39 +00:00

fruitpie

pd: samus: ryu: add back in Vconn support correctly

2014-10-15 00:09:32 +00:00

hadoken

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

hoho

pd: hoho: de-assert PD_SBU_ENABLE at boot.

2014-10-14 23:59:19 +00:00

host

usb_pd: Add port parameter to pd_set_input_current_limit

2014-10-10 02:43:39 +00:00

it8380dev

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

keyborg

zinger: keyborg: fix runtime bug with task_wait_event()

2014-08-22 00:52:43 +00:00

link

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

mccroskey

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

mec1322_evb

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

nyan

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

peppy

Peppy: Switch to shared battery cut off command.

2014-07-31 04:38:33 +00:00

pinky

Pinky: Pull up AC_PRESENT

2014-10-10 02:43:35 +00:00

pit

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

plankton

usb_pd: Add port parameter to pd_set_input_current_limit

2014-10-10 02:43:39 +00:00

rambi

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

ryu

pd: samus: ryu: add back in Vconn support correctly

2014-10-15 00:09:32 +00:00

ryu_sh

Ryu: Sensor hub changes for p1.

2014-09-05 01:17:59 +00:00

samus

samus: Add define for EVT3

2014-10-14 23:59:19 +00:00

samus_pd

pd: samus: ryu: add back in Vconn support correctly

2014-10-15 00:09:32 +00:00

snow

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

spring

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

squawks

Makefile: Add support for per-board symlinks to top level

2014-07-30 03:10:06 +00:00

twinkie

usb: export firmware version

2014-10-11 07:29:15 +00:00

zinger

pd: VDM Alternate mode support.

2014-10-09 20:44:43 +00:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00