mirror of
https://github.com/Telecominfraproject/OpenCellular.git
synced 2026-01-05 14:31:31 +00:00
3b24f8ac3f
Sometimes a perfectly sane image enters rolling reboot mode in case
some data change triggered a bug which prevents the normal startup and
causes a reset.
The most likely task causing in in case of cr50 would be the tpm task.
Let's add another check of the restart counter: should it reach the
value of 50, do not start the TPM task.
BRANCH=none
BUG=chrome-os-partner:55708
TEST=with this code plus an unaligned access introduced in tpm
initialization sequence in both RW_A and RW_B, program the full
image on the dev board.
Observe the device reset 50 time is rapid succession and then
stop with the following message on the console:
Bldr |511709
retry|50
Himg =4F992103..408D193E
Hfss =384E4655..EE13EBD0
Hinf =44D21600..B70529BD
jump @00044000
--- UART initialized after reboot ---
[Reset cause: rtc-alarm]
[Image: RW, cr50_v1.1.5044-8d6f7a2+ private-cr51:v0.0.68-633229c ...
+ cryptoc:v0.0.4-5319e83 2016-08-07 19:37:16 vbendeb@kvasha]
[0.004130 Inits done]
[0.006919 Active NVram partition set to 0]
Console is enabled; type HELP for help.
> system_rolling_reboot_suspected: roling reboots suspected. Try \
powercycling to clear
this condition.
[0.010502 Task 2 (TPM) exited!]
Change-Id: I6b08c5c1a02da9edf9bdf394e57cc56d2e595ad1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/366892
Reviewed-by: Bill Richardson <wfrichar@chromium.org>