scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2026-01-08 00:21:46 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
ebe37f0008af291a1a536ae9012cc370498fb818
OpenCellular/board
History
Kyoung Kim ebe37f0008 Lars: S0ix/S3 EC power improvement 
USB2_OTG_ID and USB2_OTG_VBUSSENSE pins were floated due to open drain
configuration. Improve EC power and remove power difference between S3
and S0ix. Improve EC power for SOC G3.

BRANCH=firmware-glados-7820.B
BUG=none
TEST=measure EC powers at S3/SOC-G3 and S0ix and check if there
are difference

Change-Id: I0535be675bc3a3a84214590e8190f1fedae1142c
Signed-off-by: Kyoung Kim <kyoung.il.kim@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/327070
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit 6dbad7f06e245bfa99e37326ed0517e81e207ef9)
Reviewed-on: https://chromium-review.googlesource.com/327480
Commit-Ready: Kyoung Il Kim <kyoung.il.kim@intel.com>
Tested-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
2016-02-17 12:01:42 -08:00
..
auron
pwm: Add common initialization for PWM pins
2015-12-04 01:20:33 -08:00
bds
cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs
2015-11-03 09:08:21 -08:00
big
pwm: Add common initialization for PWM pins
2015-12-04 01:20:33 -08:00
chell
mec1322: clock: Use full-speed 48MHz processor clock during EC boot
2016-02-09 19:51:00 -08:00
cr50
cr50: upgrade command extension
2016-02-17 12:01:32 -08:00
dingdong
pd: Cleanup PD port-to-task macros
2015-11-11 08:05:40 -08:00
discovery
USART: Add DMA based receiver
2015-08-24 19:08:35 +00:00
discovery-stm32f072
USART: Add DMA based receiver
2015-08-24 19:08:35 +00:00
glados
mec1322: clock: Use full-speed 48MHz processor clock during EC boot
2016-02-09 19:51:00 -08:00
glados_pd
chell / chell_pd: Use power-optimized GPIO defaults
2015-12-24 01:43:00 -08:00
hadoken
cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs
2015-11-03 09:08:21 -08:00
hoho
pd: Cleanup PD port-to-task macros
2015-11-11 08:05:40 -08:00
honeybuns
honeybuns: enable updates over USB-PD
2015-12-11 00:47:56 -08:00
host
pd: change battery and variable sink cap for voltage inaccuracy
2015-10-23 13:18:58 -07:00
it8380dev
it8380dev: Implement GPIO mode for KBS pins and fix gpio_set_level()
2015-12-14 20:04:54 -08:00
jerry
cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs
2015-11-03 09:08:21 -08:00
kunimitsu
mec1322: clock: Use full-speed 48MHz processor clock during EC boot
2016-02-09 19:51:00 -08:00
lars
Lars: S0ix/S3 EC power improvement
2016-02-17 12:01:42 -08:00
lars_pd
Lars: Remove second port of PD firmware
2015-12-06 19:00:51 -08:00
llama
cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs
2015-11-03 09:08:21 -08:00
lucid
lucid: add battery cutoff functionality
2016-02-16 13:34:13 -08:00
npcx_evb
nuc: Support hibernate_wake_pins on wheatley, npcx_evb and npcx_evb_arm.
2016-01-14 22:12:05 -08:00
npcx_evb_arm
nuc: Support hibernate_wake_pins on wheatley, npcx_evb and npcx_evb_arm.
2016-01-14 22:12:05 -08:00
oak
oak: pd: move power change notification to function board_set_charge_limit.
2016-01-08 05:04:45 -08:00
pdeval-stm32f072
pd: Add support for multiple distinct TCPC alert signals
2015-11-25 12:59:17 -08:00
pit
cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs
2015-11-03 09:08:21 -08:00
plankton
Plankton: Added support for normal dualrole operation
2016-02-08 12:09:08 -08:00
rambi
pwm: Add common initialization for PWM pins
2015-12-04 01:20:33 -08:00
ryu
motion: minium interval between motion task now a variable
2015-11-13 01:00:39 -08:00
samus
charger: Change unlocked battery level ignore conditions
2016-01-06 18:48:11 -08:00
samus_pd
pwm: Add common initialization for PWM pins
2015-12-04 01:20:33 -08:00
snoball
stm32: Don't use HSI48 clock for chips which don't support it
2015-12-11 17:03:22 -08:00
strago
pd: Add common EC_HOST_EVENT_PD_MCU implementation
2016-01-07 20:12:58 -08:00
twinkie
GPIO: Prefer gpio_set_flags
2016-01-26 18:54:28 -08:00
wheatley
wheatley / nuc: Modified the internal ref voltage of ADC to 2.816V
2016-02-17 02:02:03 -08:00
zinger
stm32: add synchronous debug printf
2015-10-19 13:45:49 -07:00
chell_pd
chell: Add EC/PD configuration for chell board
2015-10-12 13:15:48 -07:00
kunimitsu_pd
kunimitsu_pd: enable kunimitsu PD build
2015-08-12 04:25:20 +00:00
minimuffin
zinger: minimuffin: add board support for minimuffin
2014-10-02 20:51:10 +00:00
oak_pd
oak_pd: change oak_pd to be a sym link to glados_pd
2015-11-04 07:08:35 -08:00
OWNERS
Add OWNERS files
2014-04-02 19:58:53 +00:00