Sam Hurst c0f9e3f411 npcx: pwm: Fix prescaler calculation ...

The pwm prescaler wasn't being calculated properly when used with
the 32 Khz clock.

BUG=chrome-os-partner:57526
BRANCH=none
TEST=Manuel
- With PWM frequency set to 100Hz, I verified on the scope that
  the duty cycle changed from 0 to 100% in 10% increments.

- Verified on the scope that PWM frequency could be set to 100Hz,
  200Hz, 300Hz, 400Hz, and  2600Hz.

Change-Id: Idf8ffb6b20d469c9ea58e5a34e944f79d475eb15
Reviewed-on: https://chromium-review.googlesource.com/388814
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>

2016-09-29 19:14:41 -07:00

..

lfw

nuc: Add SHI driver for arm-based platform in chip folder.

2015-06-26 18:57:32 +00:00

spiflashfw

nuc: Fixed flash layout issue for npcx

2015-09-21 20:50:56 -07:00

adc_chip.h

wheatley / nuc: Modified the internal ref voltage of ADC to 2.816V

2016-02-17 02:02:03 -08:00

adc.c

npcx: adc: Properly wait for conversion interrupt

2016-08-10 15:30:47 -07:00

build.mk

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

clock_chip.h

npcx: Better download time for sysjump by increasing clock freq.

2016-09-08 06:14:51 -07:00

clock.c

npcx: Better download time for sysjump by increasing clock freq.

2016-09-08 06:14:51 -07:00

config_chip.h

kevin / gru: Increase size of code RAM

2016-07-26 17:32:31 -07:00

config_flash_layout.h

kevin: Move RAM from data section to code

2016-05-10 09:34:45 -07:00

espi.c

npcx: Fixed bug which only handles VW event of SUS_WARN# in rising edge.

2016-09-01 19:53:02 -07:00

fan_chip.h

nuc: Support rpm mode for fan control.

2016-01-06 20:43:32 -08:00

fan.c

hooks: Add relative HOOK_INIT priority for peripherals

2016-05-05 01:12:25 -07:00

flash.c

flash: Add command to get SPI flash chip info

2016-09-23 12:21:51 -07:00

gpio.c

npcx: gpio: Remove DEBUG_GPIO to make gpio_interrupt reentrant

2016-09-23 21:09:34 -07:00

header.c

wheatley: Add CONFIG_LTO definition to reduce FW size.

2015-12-30 20:40:48 -08:00

hwtimer_chip.h

nuc: Add support for CONFIG_LOW_POWER_S0.

2016-02-06 01:57:58 -08:00

hwtimer.c

npcx: Adjust relative IRQ priorities for high-priority UART

2016-08-07 21:43:55 -07:00

i2c.c

npcx: Fixed bug i2c sometime cannot generates NACK in Read Byte protocol

2016-09-21 12:48:43 -07:00

jtag.c

nuc: Enable JTAG directly by NPCX_ENABLE_JTAG definition

2015-10-17 04:56:09 -07:00

keyboard_raw.c

npcx: Adjust relative IRQ priorities for high-priority UART

2016-08-07 21:43:55 -07:00

lpc_chip.h

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

lpc.c

chip/npcx: Close LPC window before sysjump

2016-09-23 12:21:29 -07:00

peci.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

pwm_chip.h

pwm: Add PWM_CONFIG_DSLEEP config flag

2016-04-27 23:58:04 -07:00

pwm.c

npcx: pwm: Fix prescaler calculation

2016-09-29 19:14:41 -07:00

registers.h

npcx: gpio: Remove DEBUG_GPIO to make gpio_interrupt reentrant

2016-09-23 21:09:34 -07:00

rom_chip.h

nuc: Add SHI driver for arm-based platform in chip folder.

2015-06-26 18:57:32 +00:00

shi_chip.h

npcx: Rename CONFIG_SHI to CONFIG_HOSTCMD_SPS

2016-03-08 13:56:38 -08:00

shi.c

npcx: shi: Clear EOR bit at start of legit transaction

2016-09-21 19:37:51 -07:00

spi.c

cleanup: DECLARE_CONSOLE_COMMAND only needs 4 args

2016-08-24 16:30:10 +00:00

system_chip.h

npcx: Fixed bug that api utility in ROM doesn't enable burst mode.

2016-09-15 16:16:22 -07:00

system.c

npcx: Selectively filter WDT reset in reset_flags

2016-09-23 21:09:18 -07:00

uart.c

npcx: Adjust relative IRQ priorities for high-priority UART

2016-08-07 21:43:55 -07:00

watchdog.c

npcx: watchdog: Log watchdog panic information

2016-09-27 20:33:54 -07:00