Jeffrey Townsend
b349044c34
Merge pull request #439 from roylee123/as5916_54xm_lm75_48to4c
...
[as5916_54xm]Change one thermal sensor's i2c address to be 0x4C or 0x48.
2018-10-09 12:50:01 -07:00
Jeffrey Townsend
52c0bc9f65
Merge pull request #449 from delta-JohnsonLu/delta_ak7448
...
[delta ak7448] Add Support for OOM.
2018-10-09 12:49:26 -07:00
Jeffrey Townsend
5289377134
Merge pull request #430 from linyutsung/master
...
Add support for S9230-64X with Nephos ASIC and 64 QSFP ports
2018-10-09 12:48:38 -07:00
Jeffrey Townsend
fb6456bb14
Merge pull request #438 from jostar-yang/as7716-32x
...
Use i2c word mode instead of use block mode for access sys eeprom
2018-10-09 12:43:12 -07:00
Jeffrey Townsend
f37a2b2091
Merge pull request #443 from phani-karanam/add_OOM_SUPPORT_for_accton_wedge100_32x
...
Added OOM support for x86-64-accton-wedge100-32x
2018-10-09 12:42:46 -07:00
Jeffrey Townsend
3c320e921d
Merge pull request #446 from phani-karanam/add_OOM_support_for_wedge100BF-65x
...
Added OOM support for x86-64-accton-wedge100bf-65x
2018-10-09 12:42:25 -07:00
Jeffrey Townsend
7861ad22da
Merge pull request #441 from phani-karanam/add_OOM_support_for_x86_64_accton_wedge100bf_32x
...
Added OOM support for x86-64-accton-wedge100bf-32x
2018-10-09 12:42:09 -07:00
roy_lee
b1f7d2880b
[platform] add new platform "as5916-54xl".
...
Signed-off-by: roy_lee <roy_lee@accton.com >
2018-10-09 10:13:30 +08:00
roy_lee
a019c2e82f
[platform] accton-asxvolt16, change OnlPlatformPortConfig from 32x100 to 20x100.
...
Signed-off-by: roy_lee <roy_lee@accton.com >
2018-10-08 14:17:18 +08:00
roy_lee
ffe708627d
[platform] add new platform accton-asxvolt16.
...
Signed-off-by: roy_lee <roy_lee@accton.com >
2018-10-08 10:20:08 +08:00
Jostar Yang
a8ad49568e
Modify PSU driver to suuport delta and 3y power
2018-10-03 14:06:35 +08:00
Jostar Yang
edaff9f159
Modify psu driver to support both 3y and delte power
2018-10-03 11:05:15 +08:00
Jostar Yang
c5ca78c76b
Merge branch 'master' of https://github.com/opencomputeproject/OpenNetworkLinux into as7816-64x
2018-10-03 10:34:32 +08:00
brandonchuang
ef45c1123b
[as5916-54xks] Support onlp_sysi_platform_info_get()
2018-09-27 10:20:38 +08:00
Jeffrey Townsend
89513d0489
Merge pull request #429 from OrdnanceNetworks/netberg-aurora-420-support
...
[netberg-aurora-420] Add Netberg Aurora 420 switch support
2018-09-25 11:19:50 -07:00
Jeffrey Townsend
2e503b83bb
Merge pull request #425 from Hsu-PC/master
...
[Quanta][LY8] modify port name initial method
2018-09-25 11:15:34 -07:00
Jeffrey Townsend
d1c5086c28
Merge pull request #424 from brandonchuang/as5916_54xk
...
[as5916-54xk] Add support for OOM
2018-09-25 11:14:55 -07:00
Jeffrey Townsend
6ca71d738f
Merge pull request #422 from brandonchuang/as5512_54x
...
[as5512-54x] Add support for OOM
2018-09-25 11:14:38 -07:00
Jeffrey Townsend
c7e493982a
Merge pull request #413 from brandonchuang/oom
...
Remove optoe.c under accton x86-64 folder, use the common one instead
2018-09-25 11:14:19 -07:00
Jeffrey Townsend
5060404140
Merge pull request #412 from brandonchuang/as4610_54t_b
...
[as4610] Add support for OOM optoe driver
2018-09-25 11:13:51 -07:00
brandonchuang
f036c69ef2
[as5916-54xks] Fix LED auto mode display ON issue
2018-09-18 10:07:10 +08:00
brandonchuang
4163206ebc
[as5916-54xks] Add sfp/qsfp eeprom write capability
2018-09-18 09:59:24 +08:00
Vic Lin
1b9bd4ec7a
Add support for Accton AS7112-54X
2018-09-17 15:22:01 +08:00
Oleksandr Shamray
8afec0ff0e
Add: MSN2100-b system support
...
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com >
2018-09-12 17:45:19 +00:00
brandonchuang
af8fcede82
[as5916-54xks] Add tcam interrupt sysfs attributes
2018-09-11 15:56:58 +08:00
brandonchuang
05ce02934e
[as5916-54xks] Revise the sfp eeprom read length
2018-09-10 15:23:51 +08:00
Sergey Popovich
6dd61ba65a
platforms: netberg: Add Aurora 420 switch
...
It is very similar to Aurora 420, even onlp shared object part from
Aurora 620 considered as example when porting support for 420 (see
the diff between 620 and 420 to find differences if necessary).
Main difference in onlp is that we have four LEDs (1 SYS STAT, 2 PSU
and 1 for FAN), 7 thermal (4 for two PSU, 1 for MAC, 1 for front and
1 for rear) and 6 fans (4 for board, 2 for PSU).
New 420, as well as 620 and 720 requires upstream ONIE to install
correctly. Install and boot tested with ONIE "master-201805301609".
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co >
2018-09-07 21:35:34 +03:00
Sergey Popovich
6d394e7418
platforms: netberg: Update hardware monitor driver
...
Following enhancements come with this change:
o New ASTERION board
o New/updated sysfs interface to:
+ detect rxlos (rxlos1..rxlos4)
+ set tx_disable (tx_disable1..tx_disable4)
+ detect tx_fault (tx_fault1..tx_fault4)
+ read/update sfp_copper eeprom
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co >
2018-09-07 21:35:34 +03:00
Sergey Popovich
e9409f1295
platforms: netberg: Correct vendor-config enterprise number
...
According to IANA assignments for enterprise Netberg company has number
50424, not 47294. Correct this to match one in ONIE.
Signed-off-by: Sergey Popovich <sergey.popovich@ordnance.co >
2018-09-07 21:35:34 +03:00
brandonchuang
a9b318548d
[as5916-54xks] Update ipmi timeout
2018-09-06 16:17:06 +08:00
Zi Zhou
4d5d8832e0
add i2c-ismt parameters to read JDSU PLRXPL-VI-S24-22 SFP EEPROM properly
2018-09-05 10:45:14 -07:00
Oleksandr Shamray
9c649d16e1
Fix: CPU sensors count on MQM8700 system
...
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com >
2018-09-05 10:12:37 +00:00
Oleksandr Shamray
acc69bfa90
Change: System name QMB700 -> MQM8700
...
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com >
2018-09-05 10:12:00 +00:00
Oleksandr Shamray
43e8d1848b
Add: QMB700/QMB700ES systems support
...
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com >
2018-09-05 10:12:00 +00:00
Oleksandr Shamray
2fedc3b2f9
Add: fan_per_module parameter to common code. You can define
...
fan_count in module instead of defining
by FAN_TYPE_NO_EEPROM/FAN_TYPE_EEPROM before
Add: Orange LED support to common code.
Add: manage_leds_type3 to support future systems
with 12 FAN's in 6 modules and using Orange led instead of Red.
FIX: remove unnecessary LED color2 from led_colors_map
FIX: change FAN LED description for systems with 2 fans pre module
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com >
2018-09-05 10:11:25 +00:00
phani-karanam
e847ba6cb8
Added OOM support for x86-64-accton-wedge100bf-65x
2018-09-05 11:23:56 +08:00
johnson
d7975e68ed
[delta ak7448] Add Support for OOM.
...
Signed-off-by: johnson <JOHNSON.LU@deltaww.com >
2018-09-04 17:18:11 +08:00
brandonchuang
e67a4c937c
[as5916-54xks] Update peripheral drivers to use BMC
2018-09-04 15:32:40 +08:00
roy_lee
030109b992
[platform] accton new model as7316-26xb
...
Signed-off-by: roy_lee <roy_lee@accton.com >
2018-09-04 06:01:18 +00:00
phani-karanam
cd8555b113
Added OOM support for x86-64-accton-wedge100-32x
2018-08-31 18:30:34 +08:00
phani-karanam
5fbdaebe81
Added OOM support for x86-64-accton-wedge100bf-32x
2018-08-30 20:28:16 +08:00
Jeffrey Townsend
5cc78a80ce
Merge pull request #436 from jostar-yang/csp-9250
...
Modify csp9250 drv to support kernel-4.14
2018-08-29 11:35:03 -07:00
Jeffrey Townsend
44d7d54830
Merge pull request #431 from jostar-yang/as5916-54xks
...
Modify sysi to read eeprom via word_data.
2018-08-29 11:32:18 -07:00
roy_lee
3633dd660d
Add both 0x48 and 0x4C devnode, leave onlpdump to tell which one is valid.
...
Signed-off-by: roy_lee <roy_lee@accton.com >
2018-08-29 09:16:47 +00:00
roy_lee
af627ba96a
Store thermal1 addr after 1st get.
...
Signed-off-by: roy_lee <roy_lee@accton.com >
2018-08-29 09:15:22 +00:00
roy_lee
afd4c7a045
Examine 0x4c to tell thermal1 address. It's 0x48 for R0A, otherwise 0x4C
...
Signed-off-by: roy_lee <roy_lee@accton.com >
2018-08-29 09:04:56 +00:00
Jostar Yang
f5c7e100c6
Use i2c word mode instead of use block mode for access sys eeprom
2018-08-29 15:51:53 +08:00
Jostar Yang
490aa69c5f
Modify to use i2c word mode instead of use block mode for access system eeprom
2018-08-29 14:42:23 +08:00
Jostar Yang
cc32238564
1. Let csp9250 support kernel-4.14. 2. Remove not need debug log
2018-08-28 16:31:21 +08:00
roy_lee
dfe91c5bae
[as5916_54xm]Move LM75 from 0x48 to 0x4C for R0B board or later
2018-08-27 07:33:48 +00:00