add mem_monitor.sh script to monitor memomory usage

Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -53,6 +53,7 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
+	sonicfi-rap650c \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -410,6 +411,7 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -341,7 +341,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_EFI is not set
 CONFIG_DEBUG_GPIO=y
 # CONFIG_DEBUG_INFO_REDUCED is not set
-# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=n
+CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
+CONFIG_DEBUG_KMEMLEAK_TEST=m
+CONFIG_SLUB_DEBUG=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_MISC is not set
 # CONFIG_DEBUG_PLIST is not set

feeds/ipq807x_v5.4/ipq60xx/config-5.4

@@ -342,7 +342,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_EFI is not set
 CONFIG_DEBUG_GPIO=y
 # CONFIG_DEBUG_INFO_REDUCED is not set
-# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=n
+CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
+CONFIG_DEBUG_KMEMLEAK_TEST=m
+CONFIG_SLUB_DEBUG=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_MISC is not set
 # CONFIG_DEBUG_PLIST is not set

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -21,6 +21,7 @@ edgecore,oap103)
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
 sonicfi,rap630w-311g|\
+sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -24,6 +24,7 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
+	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -50,6 +51,16 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	sonicfi,rap650c)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,6 +16,20 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
+ath11k_generate_macs_sonicfi() {
+	mac=$(fw_printenv -n BaseMacAddress)
+	[ -z "$mac" ] && return;
+
+	touch /lib/firmware/ath11k-macs
+	eth=$(macaddr_canonicalize $mac)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
+	mac3=$(macaddr_add $eth 4)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -63,6 +77,7 @@ case "$FIRMWARE" in
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
+	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -97,6 +112,9 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
+	sonicfi*)
+		ath11k_generate_macs_sonicfi
+		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,7 +10,8 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103")
+    "edgecore,oap103"|\
+    "sonicfi,rap650c")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,6 +29,7 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
+	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -83,5 +84,17 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
+	sonicfi,rap650c)
+		boot_part=$(fw_printenv -n bootfrom)
+		[ ${#boot_part} -eq 0 ] && boot_part=0
+		echo "Current bootfrom is $boot_part"
+		if [[ $boot_part == 1 ]]; then
+			CI_UBIPART="rootfs"
+			CI_FWSETENV="bootfrom 0"
+		elif [[ $boot_part == 0 ]]; then
+			CI_UBIPART="rootfs_1"
+			CI_FWSETENV="bootfrom 1"
+		fi
+		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/config-5.4

@@ -342,7 +342,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_EFI is not set
 CONFIG_DEBUG_GPIO=y
 # CONFIG_DEBUG_INFO_REDUCED is not set
-# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=n
+CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
+CONFIG_DEBUG_KMEMLEAK_TEST=m
+CONFIG_SLUB_DEBUG=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_MISC is not set
 # CONFIG_DEBUG_PLIST is not set

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "SonicFi RAP650C";
+	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
+	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio57";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			usb_mux_sel_pins: usb_mux_pins {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			pcie0_pins: pcie_pins {
+				pcie0_rst {
+					pins = "gpio58";
+					function = "pcie0_rst";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				pcie0_wake {
+					pins = "gpio59";
+					function = "pcie0_wake";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio25";
+					function = "gpio";
+					bias-pull-up;
+				};
+				mux_3 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			led_pins: led_pins {
+				red {
+					pins = "gpio0";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				green {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				blue {
+					pins = "gpio9";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			spi_3_pins: spi_3_pins {
+				mux {
+					pins = "gpio50", "gpio52", "gpio53";
+					function = "blsp3_spi";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				spi_cs {
+					pins = "gpio22";
+					function = "blsp3_spi2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				quartz_interrupt {
+					pins = "gpio47";
+					function = "gpio";
+					input;
+					bias-disable;
+				};
+				quartz_reset {
+					pins = "gpio21";
+					function = "gpio";
+					output-low;
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <5>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <24>;
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001a00 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@78b8000 {
+			status = "ok";
+			pinctrl-0 = <&spi_3_pins>;
+			pinctrl-names = "default";
+			cs-select = <2>;
+			quartz-reset-gpio = <&tlmm 21 1>;
+
+			spidev3: spi@3 {
+				  compatible = "qti,spidev";
+				  reg = <0>;
+				  spi-max-frequency = <24000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		usb3@8A00000 {
+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
+		phy@84000 {
+			status = "ok";
+		};
+
+		phy@86000 {
+			status = "ok";
+		};
+
+		pci@20000000 {
+			perst-gpio = <&tlmm 58 1>;
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&led_pins>;
+			pinctrl-names = "default";
+
+			red {
+				label = "sys:red";
+				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			green {
+				label = "sys:green";
+				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_power: blue {
+				label = "sys:blue";
+				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <24>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <24>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		nss-macsec0 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x90>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,6 +57,17 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
+define Device/sonicfi_rap650c
+  DEVICE_TITLE := SonicFi RAP650C
+  DEVICE_DTS := qcom-ipq807x-rap650c
+  DEVICE_DTS_CONFIG=config@hk09
+  SUPPORTED_DEVICES := sonicfi,rap650c
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap650c
+
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -63,6 +63,17 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF189W
 endef
 
+define Package/ath12k-wifi-sercomm-ap72tip
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for AP72TIP
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip-v4
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for AP72TIP-v4
+endef
+
+
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -110,9 +121,25 @@ define Package/ath12k-wifi-cig-wf189h/install
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
+define Package/ath12k-wifi-sercomm-ap72tip/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.ap72tip.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.ap72tip.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+endef
+
+define Package/ath12k-wifi-sercomm-ap72tip-v4/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+endef
+
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
+$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
+$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-QCN92XX.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-QCN92XX.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "qcn92xx.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-v4-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-QCN92XX.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "ap72tip-v4-QCN92XX.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
+                ],
+                "data": "qcn92xx.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -9,3 +9,9 @@ $encoder -c board-2-eap105-QCN92XX.json -o board-2.bin.eap105.QCN92XX
 
 $encoder -c board-2-rap7110c_341x-IPQ5332.json -o board-2.bin.rap7110c_341x.IPQ5332
 $encoder -c board-2-rap7110c_341x-QCN92XX.json -o board-2.bin.rap7110c_341x.QCN92XX
+
+$encoder -c board-2-ap72tip-IPQ5332.json -o board-2.bin.ap72tip.IPQ5332
+$encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
+
+$encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
+$encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -126,12 +126,15 @@ hostapd_common_add_device_config() {
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
+	config_add_boolean maxassoc_ignore_probe
 
 	config_add_string acs_chan_bias
+	config_add_boolean acs_exclude_dfs
 	config_add_array hostapd_options
 
 	config_add_int airtime_mode
 	config_add_int mbssid
+	config_add_boolean rnr_beacon ema
 
 	hostapd_add_log_config
 }
@@ -142,10 +145,11 @@ hostapd_prepare_device_config() {
 
 	local base_cfg=
 
-	json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \
+	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
 		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
-		mbssid:0 band reg_power_type stationary_ap
+		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
+		maxassoc_ignore_probe band
 
 	hostapd_set_log_options base_cfg
 
@@ -155,6 +159,9 @@ hostapd_prepare_device_config() {
 	set_default legacy_rates 0
 	set_default airtime_mode 0
 	set_default cell_density 0
+	set_default rnr_beacon 0
+	set_default ema 0
+	set_default acs_exclude_dfs 0
 
 	[ -n "$country" ] && {
 		append base_cfg "country_code=$country" "$N"
@@ -244,8 +251,14 @@ hostapd_prepare_device_config() {
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 	append base_cfg "beacon_int=$beacon_int" "$N"
 	[ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
+	append base_cfg "dtim_period=$dtim_period" "$N"
 	[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
 	[ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
+	[ "$maxassoc_ignore_probe" -gt 0 ] && append base_cfg "no_probe_resp_if_max_sta=1" "$N"
+	[ "$rnr_beacon" -gt 0 ] && append base_cfg "rnr_beacon=$rnr_beacon" "$N"
+	[ "$ema" -gt 0 ] && append base_cfg "ema=$ema" "$N"
+	[ "$acs_exclude_dfs" -gt 0 ] && append base_cfg "acs_exclude_dfs=$acs_exclude_dfs" "$N"
+
 	[ "$mbssid" -gt 0 ] && [ "$mbssid" -le 2 ] && append base_cfg "mbssid=$mbssid" "$N"
 
 	[ "$band" = "6g" ] && {
@@ -287,15 +300,24 @@ hostapd_common_add_bss_config() {
 	config_add_int ieee80211w
 	config_add_int eapol_version
 
-	config_add_array auth_server acct_server
-	config_add_string 'server:host'
+	config_add_string 'auth_server:host' 'server:host'
 	config_add_string auth_secret key
 	config_add_int 'auth_port:port' 'port:port'
 
+	config_add_string acct_server
 	config_add_string acct_secret
 	config_add_int acct_port
+
+	config_add_string acct_server_secondary
+	config_add_string acct_secret_secondary
+	config_add_int acct_port_secondary
+
 	config_add_int acct_interval
 
+	config_add_string auth_server_secondary
+	config_add_string auth_secret_secondary
+	config_add_int auth_port_secondary
+
 	config_add_int bss_load_update_period chan_util_avg_period
 
 	config_add_string dae_client
@@ -339,8 +361,8 @@ hostapd_common_add_bss_config() {
 	config_add_string lci civic
 
 	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
-	config_add_int r0_key_lifetime reassociation_deadline
-	config_add_string mobility_domain r1_key_holder
+	config_add_int r0_key_lifetime reassociation_deadline ft_l2_refresh
+	config_add_string mobility_domain r1_key_holder ft_key
 	config_add_array r0kh r1kh
 
 	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -391,14 +413,18 @@ hostapd_common_add_bss_config() {
 	config_add_array radius_auth_req_attr
 	config_add_array radius_acct_req_attr
 
-	config_add_int eap_server radius_server_auth_port
-	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients
+	config_add_int eap_server
+	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
 
 	config_add_boolean fils
 	config_add_string fils_dhcp
 
+	config_add_boolean ratelimit
 	config_add_int ocv
 
+	config_add_string uci_section
+	config_add_boolean dynamic_probe_resp
+
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
 }
@@ -433,6 +459,7 @@ hostapd_set_psk() {
 	local ifname="$1"
 
 	rm -f /var/run/hostapd-${ifname}.psk
+	touch /var/run/hostapd-${ifname}.psk
 	for_each_station hostapd_set_psk_file ${ifname}
 }
 
@@ -549,18 +576,83 @@ append_airtime_sta_weight() {
 	[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
 }
 
-append_auth_server() {
-	[ -n "$1" ] || return
-	append bss_conf "auth_server_addr=$1" "$N"
-	append bss_conf "auth_server_port=$auth_port" "$N"
-	[ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
-}
+append_radius_server() {
 
-append_acct_server() {
-	[ -n "$1" ] || return
-	append bss_conf "acct_server_addr=$1" "$N"
-	append bss_conf "acct_server_port=$acct_port" "$N"
-	[ -n "$acct_secret" ] && append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+	json_get_vars \
+		auth_server auth_secret auth_port \
+		auth_server_secondary auth_secret_secondary auth_port_secondary \
+		dae_client dae_secret dae_port \
+		dynamic_ownip ownip radius_client_addr \
+		eap_reauth_period request_cui \
+		erp_domain mobility_domain \
+		fils_realm fils_dhcp
+
+	set_default dynamic_ownip 1
+
+	# legacy compatibility
+	[ -n "$auth_server" ] || json_get_var auth_server server
+	[ -n "$auth_port" ] || json_get_var auth_port port
+	[ -n "$auth_secret" ] || json_get_var auth_secret key
+
+	[ "$fils" -gt 0 ] && {
+		set_default erp_domain "$mobility_domain"
+		set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
+		set_default fils_realm "$erp_domain"
+
+		append bss_conf "erp_send_reauth_start=1" "$N"
+		append bss_conf "erp_domain=$erp_domain" "$N"
+		append bss_conf "fils_realm=$fils_realm" "$N"
+		append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
+
+		[ "$fils_dhcp" = "*" ] && {
+			json_get_values network network
+			fils_dhcp=
+			for net in $network; do
+				fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
+				[ -n "$fils_dhcp" ] && break
+			done
+
+			[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
+				fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
+		}
+		[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
+	}
+
+	set_default auth_port 1812
+	set_default auth_port_secondary 1812
+	set_default dae_port 3799
+	set_default request_cui 0
+
+	[ "$eap_server" -eq 0  -a -n "$auth_server" ] && {
+		append bss_conf "auth_server_addr=$auth_server" "$N"
+		append bss_conf "auth_server_port=$auth_port" "$N"
+		append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
+	}
+
+	[ -n "$auth_server_secondary" ] && {
+		append bss_conf "auth_server_addr=$auth_server_secondary" "$N"
+		append bss_conf "auth_server_port=$auth_port_secondary" "$N"
+		[ -n "$auth_secret_secondary" ] && \
+			append bss_conf "auth_server_shared_secret=$auth_secret_secondary" "$N"
+	}
+
+	[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
+	[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
+
+	[ -n "$dae_client" -a -n "$dae_secret" ] && {
+		append bss_conf "radius_das_port=$dae_port" "$N"
+		append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
+	}
+	json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
+
+	if [ -n "$ownip" ]; then
+		append bss_conf "own_ip_addr=$ownip" "$N"
+	elif [ "$dynamic_ownip" -gt 0 ]; then
+		append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
+	fi
+
+	[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
+	[ "$macfilter" = radius ] && append bss_conf "macaddr_acl=2" "$N"
 }
 
 hostapd_set_bss_options() {
@@ -570,7 +662,7 @@ hostapd_set_bss_options() {
 
 	wireless_vif_parse_encryption
 
-	local bss_conf bss_md5sum ft_key
+	local bss_conf bss_md5sum
 	local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 
 	json_get_vars \
@@ -581,13 +673,14 @@ hostapd_set_bss_options() {
 		wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
 		macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
 		iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
-		acct_secret acct_port acct_interval \
+		acct_server acct_secret acct_port acct_interval \
+		acct_server_secondary acct_secret_secondary acct_port_secondary \
 		bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
 		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup multi_psk
+		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -604,6 +697,7 @@ hostapd_set_bss_options() {
 	set_default tdls_prohibit 0
 	set_default eapol_version $((wpa & 1))
 	set_default acct_port 1813
+	set_default acct_port_secondary 1813
 	set_default bss_load_update_period 60
 	set_default chan_util_avg_period 600
 	set_default utf8_ssid 1
@@ -612,6 +706,7 @@ hostapd_set_bss_options() {
 	set_default airtime_bss_weight 0
 	set_default airtime_bss_limit 0
 	set_default eap_server 0
+	set_default dynamic_probe_resp 0
 	set_default apup 0
 
 	/usr/sbin/hostapd -vfils || fils=0
@@ -638,6 +733,7 @@ hostapd_set_bss_options() {
 	append bss_conf "preamble=$short_preamble" "$N"
 	append bss_conf "wmm_enabled=$wmm" "$N"
 	append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
+	append bss_conf "dynamic_probe_resp=$dynamic_probe_resp" "$N"
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
@@ -654,10 +750,22 @@ hostapd_set_bss_options() {
 
 	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 
-	[ -n "$acct_interval" ] && \
-		append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
-	json_for_each_item append_acct_server acct_server
-	json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
+	[ -n "$acct_server" ] && {
+		append bss_conf "acct_server_addr=$acct_server" "$N"
+		append bss_conf "acct_server_port=$acct_port" "$N"
+		[ -n "$acct_secret" ] && \
+			append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+		[ -n "$acct_interval" ] && \
+			append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
+		json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
+	}
+
+	[ -n "$acct_server_secondary" ] && {
+		append bss_conf "acct_server_addr=$acct_server_secondary" "$N"
+		append bss_conf "acct_server_port=$acct_port_secondary" "$N"
+		[ -n "$acct_secret_secondary" ] && \
+			append bss_conf "acct_server_shared_secret=$acct_secret_secondary" "$N"
+	}
 
 	[ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N"
 
@@ -690,6 +798,8 @@ hostapd_set_bss_options() {
 			# Here we make the assumption that if we're in open mode
 			# with WPS enabled, we got to be in unconfigured state.
 			wps_not_configured=1
+			vlan_possible=1
+			append_radius_server
 		;;
 		psk|sae|psk-sae)
 			json_get_vars key wpa_psk_file
@@ -714,74 +824,15 @@ hostapd_set_bss_options() {
 			}
 			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 
+			append_radius_server
 			set_default dynamic_vlan 0
 			vlan_possible=1
 			wps_possible=1
 		;;
-		eap|eap2|eap-eap2|eap192)
-			json_get_vars \
-				auth_server auth_secret auth_port \
-				dae_client dae_secret dae_port \
-				dynamic_ownip ownip radius_client_addr \
-				eap_reauth_period request_cui \
-				erp_domain mobility_domain \
-				fils_realm fils_dhcp
-
+		eap|eap192|eap-eap2|eap2)
+			append_radius_server
 			# radius can provide VLAN ID for clients
 			vlan_possible=1
-
-			set_default dynamic_ownip 1
-
-			# legacy compatibility
-			[ -n "$auth_server" ] || json_get_var auth_server server
-			[ -n "$auth_port" ] || json_get_var auth_port port
-			[ -n "$auth_secret" ] || json_get_var auth_secret key
-
-			[ "$fils" -gt 0 ] && {
-				set_default erp_domain "$mobility_domain"
-				set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
-				set_default fils_realm "$erp_domain"
-
-				append bss_conf "erp_send_reauth_start=1" "$N"
-				append bss_conf "erp_domain=$erp_domain" "$N"
-				append bss_conf "fils_realm=$fils_realm" "$N"
-				append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
-
-				[ "$fils_dhcp" = "*" ] && {
-					json_get_values network network
-					fils_dhcp=
-					for net in $network; do
-						fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
-						[ -n "$fils_dhcp" ] && break
-					done
-
-					[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
-						fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
-				}
-				[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
-			}
-
-			set_default auth_port 1812
-			set_default dae_port 3799
-			set_default request_cui 0
-
-			[ "$eap_server" -eq 0 ] && json_for_each_item append_auth_server auth_server
-			[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
-			[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
-
-			[ -n "$dae_client" -a -n "$dae_secret" ] && {
-				append bss_conf "radius_das_port=$dae_port" "$N"
-				append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
-			}
-			json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
-
-			if [ -n "$ownip" ]; then
-				append bss_conf "own_ip_addr=$ownip" "$N"
-			elif [ "$dynamic_ownip" -gt 0 ]; then
-				append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
-			fi
-
-			[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
 			append bss_conf "eapol_key_index_workaround=1" "$N"
 			append bss_conf "ieee8021x=1" "$N"
 
@@ -798,6 +849,7 @@ hostapd_set_bss_options() {
 			append bss_conf "wpa_psk_radius=3" "$N"
 			append_radius_server
 			vlan_possible=1
+		;;
 	esac
 
 	case "$auth_type" in
@@ -921,45 +973,42 @@ hostapd_set_bss_options() {
 		}
 	fi
 
-	json_get_vars ieee80211r
-	set_default ieee80211r 0
 	if [ "$wpa" -ge "1" ]; then
-		if [ "$fils" -gt 0 ]; then
-			json_get_vars fils_realm
-			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
-		fi
+		json_get_vars ieee80211r
+		set_default ieee80211r 0
 
-		append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
-
-		hostapd_append_wpa_key_mgmt
-		[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
-	fi
-
-	if [ "$wpa" -ge "2" ]; then
 		if [ "$ieee80211r" -gt "0" ]; then
-			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
+			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline ft_l2_refresh
 
 			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
-			set_default ft_over_ds 0
+			set_default ft_over_ds 1
+			set_default ft_l2_refresh 30
 			set_default reassociation_deadline 1000
+			skip_kh_setup=0
 
 			case "$auth_type" in
-				psk)
+				psk|psk-sae)
 					set_default ft_psk_generate_local 1
+					skip_kh_setup="$ft_psk_generate_local"
 				;;
 				*)
 					set_default ft_psk_generate_local 0
 				;;
 			esac
 
+			case "$auth_type" in
+				*sae*) skip_kh_setup=0;;
+			esac
+
 			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
 			append bss_conf "mobility_domain=$mobility_domain" "$N"
 			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
 			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
 			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
+			[ -n "$ft_l2_refresh" ] && append bss_conf "ft_l2_refresh=$ft_l2_refresh" "$N"
 
-			if [ "$ft_psk_generate_local" -eq "0" ]; then
-				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
+			if [ "$skip_kh_setup" -eq "0" ]; then
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push ft_key
 				json_get_values r0kh r0kh
 				json_get_values r1kh r1kh
 
@@ -971,12 +1020,15 @@ hostapd_set_bss_options() {
 						wireless_setup_vif_failed FT_KEY_CANT_BE_DERIVED
 						return 1
 					fi
-					ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'`
+					[ -z "$ft_key" ] && {
+						key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
 
-					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key"
-					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key"
+						set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
+						set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
+					}
 				}
 
+				[ -n "$ft_key" ] && append bss_conf "ft_key=$ft_key" "$N"
 				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
@@ -989,7 +1041,18 @@ hostapd_set_bss_options() {
 				done
 			fi
 		fi
+		if [ "$fils" -gt 0 ]; then
+			json_get_vars fils_realm
+			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
+		fi
 
+		append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
+
+		hostapd_append_wpa_key_mgmt
+		[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
+	fi
+
+	if [ "$wpa" -ge "2" ]; then
 		if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 			set_default auth_cache 1
 			append bss_conf "rsn_preauth=1" "$N"
@@ -1189,6 +1252,8 @@ hostapd_set_bss_options() {
 		append bss_conf "per_sta_vif=$per_sta_vif" "$N"
 	fi
 
+	[ -n "$uci_section" ] && append bss_conf "uci_section=$uci_section" "$N"
+
 	if [ "$apup" -gt 0 ]; then
 		append bss_conf "apup=$apup" "$N"
 

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,7 +7,9 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+sercomm,ap72tip-v4|\
 sercomm,ap72tip)
+	ucidef_set_led_default "power" "POWER" "blue:status" "on"
 	ucidef_set_led_netdev "wan_link" "wan_link" "green:phy" "eth0" "link"
 	ucidef_set_led_netdev "wan_act" "wan_act" "yellow:phy" "eth0" "rx tx"
 	;;

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -29,6 +29,9 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
 		;;
+	sercomm,ap72tip-v4)
+		ucidef_set_interface_wan "eth0"
+		;;	
 	esac
 }
 
@@ -52,6 +55,13 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
                 ;;
+        sercomm,ap72tip)
+                wan_mac=$(cat /sys/class/net/eth0/address)
+                lan_mac=$(cat /sys/class/net/eth1/address)
+                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
+                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
+                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
+                ;;
         edgecore,eap105)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -68,6 +78,12 @@ qcom_setup_macs()
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
                 ;;
+        sercomm,ap72tip-v4)
+                wan_mac=$(cat /sys/class/net/eth0/address)
+                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
+                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
+                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
+                ;;
         *)
                 wan_mac=$(cat /sys/class/net/eth1/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -31,6 +31,7 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
 	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
+	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
@@ -46,6 +47,7 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
+	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x58800 0x2d000
 		;;

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -120,5 +120,9 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
+	sercomm,ap72tip-v4|\
+	sercomm,ap72tip)
+		nand_upgrade_tar "$1"
+		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -44,9 +44,11 @@
 			uniphyaddr_fixup = <0xC90F014>;
 			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
 			tip,clk_div = <0xff>; /* MDIO Frequency reduction*/
+			limit_rtlphy_10g_ablity;
 
 			phy0: ethernet-phy@0 {
 				reg = <8>;
+				compatible ="ethernet-phy-ieee802.3-c45";
 			};
 
 			phy1: ethernet-phy@1 {
@@ -211,9 +213,9 @@
 			status = "okay";
 
 			button@1 {
-				label = "wps";
-				linux,code = <KEY_WPS_BUTTON>;
-				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
@@ -479,7 +481,7 @@
 	};
 
 	button_pins: button-state {
-		pins = "gpio35";
+		pins = "gpio17";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip-v4.dts

@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5332.dtsi"
+#include "ipq5332-default-memory.dtsi"
+
+/ {
+	model = "Sercomm WiFi-7";
+	compatible = "sercomm,ap72tip-v4", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0; /*console*/
+		serial1 = &blsp1_uart1; /*ble*/
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@0 {
+	
+#if 0   //AQR114C
+		mdio:mdio@90000 {
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			phyaddr_fixup = <0xC90F018>;
+			uniphyaddr_fixup = <0xC90F014>;
+			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+
+			phy1: ethernet-phy@1 {   //aqr114c
+				reg = <0>;
+				compatible ="ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+						mdiobus = <&mdio>;
+					};
+					port@1 { //aqr114c
+						port_id = <2>;
+						phy_address = <0>;
+						mdiobus = <&mdio>;
+						ethernet-phy-ieee802.3-c45;
+					};
+				};
+			};
+		};
+		
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};	
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			qcom,phy-mdio-addr = <0>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+#else //SFP	
+		mdio:mdio@90000 { 
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			/*gpio0 for napa*/
+			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			status = "okay";
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+						mdiobus = <&mdio>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <30>;
+						media-type = "sfp"; 
+					};
+				};
+			};
+		};
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <30>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+
+#endif
+
+		/* EDMA host driver configuration for the board */
+		edma@3ab00000 {
+			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
+			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
+			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
+			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
+			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
+			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
+			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
+			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
+			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
+			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
+			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
+			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
+			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
+			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
+			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
+			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
+					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
+			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
+					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
+					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
+					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
+					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
+			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
+			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
+			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
+			qcom,rx-queue-start = <0>;		/* Rx queue start */
+			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
+						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
+						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
+						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
+						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
+						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
+						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
+						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
+			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
+				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
+				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
+				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
+				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
+				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
+				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
+				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
+				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
+				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
+				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
+				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
+				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
+				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
+				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
+				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
+				   <0 191 4>,			/* Misc error IRQ info */
+				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
+				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
+				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
+				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
+				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
+				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
+				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
+				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
+				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
+				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
+				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
+				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
+				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
+				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
+		};
+
+		leds {
+                compatible = "gpio-leds";
+
+				led@25 {
+					label = "blue:status";
+					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
+                    default-state = "off";
+                };
+				led@61 {
+					label = "green:phy";
+					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
+				};
+				led@62 {
+					label = "yellow:phy";
+					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
+				};
+		};
+		
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		wsi: wsi {
+			id = <0>;
+			num_chip = <2>;
+			status = "okay";
+			chip_info = <0 1 1>,
+				    <1 1 0>;
+		};
+	};
+};
+
+&wifi0 {
+//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	memory-region = <&q6_region>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <0>;
+	qcom,board_id = <0x16>;
+	status = "okay";
+};
+
+&qcn9224_pcie1 {
+	status = "okay";
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&blsp1_i2c2 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&blsp1_spi0 {   //nor flash
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "n25q128a11"; 
+		//, "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_spi1 {   /*tpm*/
+	pinctrl-0 = <&spi_1_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "okay";
+	
+	tpm: spi-tpm@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,st33htpm-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		status = "okay";
+	};
+};
+
+&pcm {
+	pinctrl-0 = <&audio_pins_pri>;
+	pinctrl-names = "primary";
+	status = "disabled";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo {
+	clock-frequency = <24000000>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qspi_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nandcs@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&pcie1_phy_x2 {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie1_rp {
+		reg = <0 0 0 0 0>;
+
+		qcom,mhi@1 {
+			reg = <0 0 0 0 0>;
+			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
+					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
+					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
+			memory-region = <&qcn9224_pcie1>;
+			qcom,wsi = <&wsi>;
+			qcom,wsi_index = <1>;
+			qcom,board_id = <0x100f>;  //0x1019->0x100f
+		};
+	};
+};
+
+/* PINCTRL */
+
+&tlmm {
+
+	audio_pins_pri: audio_pinmux_pri {
+		mux_1 {
+			pins = "gpio29";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio30";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio31";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio32";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_0_pins: i2c-0-state {
+		pins = "gpio43", "gpio45";
+		function = "blsp2_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	spi_1_pins: spi-1-pins {  /* tpm */
+		pins = "gpio29", "gpio30", "gpio31", "gpio32";
+		function = "blsp1_spi0";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qspi_default_state: qspi-default-state {
+		qspi_clock {
+			pins = "gpio13";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qspi_cs {
+			pins = "gpio12";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		qspi_data {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	serial_1_pins: serial1-pinmux { /*ble*/
+//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
+		pins = "gpio33", "gpio35";
+		function = "blsp1_uart2";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+/*	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};*/
+	
+	button_pins: button-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	pwm_pins: pwm-state {
+		pins = "gpio46";
+		function = "pwm0";
+		drive-strength = <8>;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-low;
+	};
+};
+
+&license_manager {
+	status = "okay";
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&ssuniphy_0 {
+	status = "okay";
+};
+
+//sercomm add
+&wifi3 {
+	/* QCN9224 5G+6G */
+	hremote_node = <&qcn9224_pcie1>;
+	qcom,board_id = <0x100f>; 
+	status = "okay";
+};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip.dts

@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5332.dtsi"
+#include "ipq5332-default-memory.dtsi"
+
+/ {
+	model = "Sercomm WiFi-7";
+	compatible = "sercomm,ap72tip", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0; /*console*/
+		serial1 = &blsp1_uart1; /*ble*/
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@0 {
+	
+#if 1   //AQR114C
+		mdio:mdio@90000 {
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			phyaddr_fixup = <0xC90F018>;
+			uniphyaddr_fixup = <0xC90F014>;
+			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+
+			phy1: ethernet-phy@1 {   //aqr114c
+				reg = <0>;
+				compatible ="ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+						mdiobus = <&mdio>;
+					};
+					port@1 { //aqr114c
+						port_id = <2>;
+						phy_address = <0>;
+						mdiobus = <&mdio>;
+						ethernet-phy-ieee802.3-c45;
+					};
+				};
+			};
+		};
+		
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};	
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			qcom,phy-mdio-addr = <0>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+#else //SFP	
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <30>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+
+		mdio:mdio@90000 { 
+			status = "okay";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			/*gpio0 for napa*/
+			phy-reset-gpio = <&tlmm 0 0>;
+
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x0>; /* lan port bitmap */
+				switch_wan_bmp = <0x6>; /* wan port bitmap */
+				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <30>;
+						media-type = "sfp"; 
+					};
+				};
+			};
+		};
+
+#endif
+
+		/* EDMA host driver configuration for the board */
+		edma@3ab00000 {
+			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
+			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
+			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
+			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
+			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
+			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
+			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
+			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
+			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
+			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
+			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
+			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
+			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
+			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
+			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
+			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
+					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
+			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
+					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
+					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
+					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
+					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
+			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
+			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
+			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
+			qcom,rx-queue-start = <0>;		/* Rx queue start */
+			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
+						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
+						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
+						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
+						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
+						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
+						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
+						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
+			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
+				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
+				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
+				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
+				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
+				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
+				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
+				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
+				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
+				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
+				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
+				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
+				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
+				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
+				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
+				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
+				   <0 191 4>,			/* Misc error IRQ info */
+				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
+				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
+				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
+				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
+				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
+				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
+				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
+				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
+				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
+				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
+				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
+				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
+				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
+				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
+		};
+
+		leds {
+                compatible = "gpio-leds";
+
+				led@25 {
+					label = "blue:status";
+					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
+                    default-state = "off";
+                };
+				led@24 {
+					label = "red:status";
+					gpios = <&tca6416 10 GPIO_ACTIVE_HIGH>;
+				};
+				led_power: led@16 {
+                                label = "green:status";
+					gpios = <&tca6416 11 GPIO_ACTIVE_HIGH>;
+				};
+				led@61 {
+					label = "green:phy";
+					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
+				};
+				led@62 {
+					label = "yellow:phy";
+					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
+				};
+		};
+/*
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "rst";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};*/
+
+		wsi: wsi {
+			id = <0>;
+			num_chip = <2>;
+			status = "okay";
+			chip_info = <0 1 1>,
+				    <1 1 0>;
+		};
+	};
+};
+
+&wifi0 {
+//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	memory-region = <&q6_region>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <0>;
+	qcom,board_id = <0x16>;
+	status = "okay";
+};
+
+&qcn9224_pcie1 {
+	status = "okay";
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&blsp1_i2c2 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&blsp1_spi0 {   //nor flash
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "n25q128a11"; 
+		//, "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_spi1 {   /*tpm*/
+	pinctrl-0 = <&spi_1_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "okay";
+	
+	tpm: spi-tpm@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,st33htpm-spi";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		status = "okay";
+	};
+};
+
+&pcm {
+	pinctrl-0 = <&audio_pins_pri>;
+	pinctrl-names = "primary";
+	status = "disabled";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo {
+	clock-frequency = <24000000>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qspi_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nandcs@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&pcie1_phy_x2 {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie1_rp {
+		reg = <0 0 0 0 0>;
+
+		qcom,mhi@1 {
+			reg = <0 0 0 0 0>;
+			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
+					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
+					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
+			memory-region = <&qcn9224_pcie1>;
+			qcom,wsi = <&wsi>;
+			qcom,wsi_index = <1>;
+			qcom,board_id = <0x100f>;  //0x1019->0x100f
+		};
+	};
+};
+
+/* PINCTRL */
+
+&tlmm {
+
+	audio_pins_pri: audio_pinmux_pri {
+		mux_1 {
+			pins = "gpio29";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio30";
+			function = "audio_pri";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio31";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio32";
+			function = "audio_pri";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_0_pins: i2c-0-state {
+		pins = "gpio43", "gpio45";
+		function = "blsp2_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	spi_1_pins: spi-1-pins {  /* tpm */
+		pins = "gpio29", "gpio30", "gpio31", "gpio32";
+		function = "blsp1_spi0";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qspi_default_state: qspi-default-state {
+		qspi_clock {
+			pins = "gpio13";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qspi_cs {
+			pins = "gpio12";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		qspi_data {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	serial_1_pins: serial1-pinmux { /*ble*/
+//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
+		pins = "gpio33", "gpio35";
+		function = "blsp1_uart2";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+/*	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};*/
+/*
+	button_pins: button-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};*/
+
+	pwm_pins: pwm-state {
+		pins = "gpio46";
+		function = "pwm0";
+		drive-strength = <8>;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-low;
+	};
+};
+
+&license_manager {
+	status = "okay";
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&ssuniphy_0 {
+	status = "okay";
+};
+
+//sercomm add
+&wifi3 {
+	/* QCN9224 5G+6G */
+	hremote_node = <&qcn9224_pcie1>;
+	qcom,board_id = <0x100f>; 
+	status = "okay";
+};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332.dtsi

@@ -736,6 +736,36 @@
 			status = "disabled";
 		};
 
+		blsp1_spi1: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			spi-max-frequency = <50000000>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+		
+		blsp1_i2c2: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b7000 0x600>;
+			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency  = <400000>;
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		blsp1_i2c1: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x600>;

feeds/qca-wifi-7/ipq53xx/files-6.1/drivers/net/phy/rtk/rtk_phy.c

@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 
 #include "phy_rtl826xb_patch.h"
 #include "phy_rtl8251b_patch.h"
@@ -30,6 +31,7 @@ static int rtl8251_match_phy_device(struct phy_device *phydev)
 static int rtl826xb_get_features(struct phy_device *phydev)
 {
     int ret;
+    struct device_node *np;
     ret = genphy_c45_pma_read_abilities(phydev);
     if (ret)
         return ret;
@@ -48,6 +50,14 @@ static int rtl826xb_get_features(struct phy_device *phydev)
     linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
                        phydev->supported);
 
+    np = of_find_node_by_name(NULL, "mdio");
+    if (np)
+	if (of_property_read_bool(np, "limit_rtlphy_10g_ablity"))
+	{
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported);
+	}
+
+
     return 0;
 }
 
@@ -80,7 +90,6 @@ static int rtkphy_config_init(struct phy_device *phydev)
         case REALTEK_PHY_ID_RTL8261N:
         case REALTEK_PHY_ID_RTL8264B:
             phydev_info(phydev, "%s:%u [RTL8261N/RTL826XB] phy_id: 0x%X PHYAD:%d\n", __FUNCTION__, __LINE__, phydev->drv->phy_id, phydev->mdio.addr);
-	    phy_modify_mmd_changed(phydev, 7, 0x20, BIT(12), 0);
 
           #if 1 /* toggle reset */
             phy_modify_mmd_changed(phydev, 30, 0x145, BIT(0)  , 1);
@@ -213,7 +222,6 @@ static int rtkphy_c45_aneg_done(struct phy_device *phydev)
 static int rtkphy_c45_read_status(struct phy_device *phydev)
 {
     int ret = 0, status = 0;
-    uint16_t local;
     phydev->speed = SPEED_UNKNOWN;
     phydev->duplex = DUPLEX_UNKNOWN;
     phydev->pause = 0;
@@ -232,9 +240,6 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
         if (ret)
             return ret;
 	
-	phy_write_mmd(phydev, 7, 0x20, 0x181);
-	local = phy_read_mmd(phydev, 7, 0x20);
-
         status =  phy_read_mmd(phydev, 31, 0xA414);
         if (status < 0)
             return status;
@@ -242,11 +247,6 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
             phydev->lp_advertising, status & BIT(11));
 
         phy_resolve_aneg_linkmode(phydev);
-	if((phydev->speed == 10000) && (local == 0x181))
-        {
-                phydev->speed = 5000;
-                phydev->duplex = DUPLEX_FULL;
-        }
     }
     else
     {

feeds/qca-wifi-7/ipq53xx/generic/config-6.1-platform

@@ -2288,7 +2288,7 @@ CONFIG_GPIOLIB_FASTPATH_LIMIT=512
 # CONFIG_GPIO_ML_IOH is not set
 # CONFIG_GPIO_MOCKUP is not set
 # CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCA953X=y
 # CONFIG_GPIO_PCA953X_IRQ is not set
 # CONFIG_GPIO_PCA9570 is not set
 # CONFIG_GPIO_PCF857X is not set

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -14,16 +14,30 @@ endef
 TARGET_DEVICES += cig_wf189
 
 define Device/sercomm_ap72tip
-  DEVICE_TITLE := Sercomm AP72 TIP
+  DEVICE_TITLE := Sercomm AP72TIP
   DEVICE_DTS := ipq5332-sercomm-ap72tip
-  DEVICE_DTS_CONFIG := config@mi01.2-qcn9160-c1
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_CONFIG := config@mi01.6
   IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
   DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
 endef
-#TARGET_DEVICES += sercomm_ap72tip
+TARGET_DEVICES += sercomm_ap72tip
+
+define Device/sercomm_ap72tip-v4
+  DEVICE_TITLE := Sercomm AP72TIP-v4
+  DEVICE_DTS := ipq5332-sercomm-ap72tip-v4
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_CONFIG := config@mi01.6
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/nand-factory.ubi := append-ubi
+  DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip-v4 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
+endef
+TARGET_DEVICES += sercomm_ap72tip-v4
 
 define Device/edgecore_eap105
   DEVICE_TITLE := Edgecore EAP105

feeds/qca-wifi-7/qca-ssdk-qca/patches/0006-qca-ssdk-Fix-10G-rtl-phy-driver-for-c45-mdio-read-wr.patch

@@ -0,0 +1,116 @@
+From 85a7c62d4e3385de1a379959dd45148cfdc95b3b Mon Sep 17 00:00:00 2001
+From: huangyunxiang <huangyunxiang@cigtech.com>
+Date: Tue, 29 Apr 2025 09:56:28 +0800
+Subject: [PATCH] qca-ssdk modify rtl826x phy mdio read/write as c45 mode and
+ clear 10G ablity
+
+---
+ src/hsl/phy/rtl826xb_phy.c                | 55 ++++++-------------
+ 1 file changed, 17 insertions(+), 38 deletions(-)
+
+diff --git a/src/hsl/phy/rtl826xb_phy.c b/src/hsl/phy/rtl826xb_phy.c
+index a336348aa9..9a67b45948 100644
+--- a/src/hsl/phy/rtl826xb_phy.c
++++ b/src/hsl/phy/rtl826xb_phy.c
+@@ -48,46 +48,39 @@ void rtl826xb_phy_lock_init(void)
+ 
+ static a_uint16_t rtl826x_phy_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
+-
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
++	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, reg_mmd, reg_id);
+ }
+ 
+ 
+ static sw_error_t rtl826x_phy_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id, a_uint16_t reg_val)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
+-
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, reg_val);
++	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, reg_mmd, reg_id, reg_val);
+ }
+ 
+ 
+ static a_uint16_t rtl826x_phy_reg_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg)
+ {
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg);
++	return hsl_phy_mii_reg_read(dev_id, phy_id, reg);
+ }
+ 
+ 
+ static sw_error_t rtl826x_phy_reg_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg, a_uint16_t reg_val)
+ {
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
++
++	return hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
+ }
+ 
+ 
+ static a_int16_t hal_miim_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
+-
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
++	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg);
+ }
+ 
+ 
+ 
+ static a_int32_t hal_miim_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg, a_uint16_t phy_data)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
+-
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, phy_data);
++	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg, phy_data);
+ }
+ 
+ 
+@@ -1281,34 +1274,20 @@ phy_826xb_autoNegoAbility_set(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t a
+ 	hsl_phy_phydev_autoneg_update(dev_id, phy_id, A_TRUE, autoneg);
+ 	
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 16);
++	phyData &= (~(0x0020 | 0x0040 | FAL_PHY_ADV_100TX_HD | FAL_PHY_ADV_100TX_FD | FAL_PHY_ADV_PAUSE | FAL_PHY_ADV_ASY_PAUSE));
++	phyData |= (autoneg & FAL_PHY_ADV_100TX_HD) ? (FAL_PHY_ADV_100TX_HD) : (0);
++	phyData |= ((autoneg & FAL_PHY_ADV_100TX_FD)) ? (FAL_PHY_ADV_100TX_FD) : (0);
+ 
+-    phyData &= (~(0x0020 | 0x0040 | 0x0080 | 0x0100 | 0x0400 | 0x0800));
+-	phyData |= ((autoneg & 1 << 1)) ? (0x0040) : (0);
+-    phyData |= ((autoneg & 1 << 2)) ? (0x0080) : (0);
+-    phyData |= ((autoneg & 1 << 3)) ? (0x0100) : (0);
+-	phyData |= ((autoneg & 1 << 4)) ? (0x0400) : (0);
+-	phyData |= ((autoneg & 1 << 5)) ? (0x0800) : (0);
+-//    phyData |= ((autoneg & 1 << 9)) ? (0x0400) : (0);
+-//    phyData |= ((autoneg & 1 << 10)) ? (0x0800) : (0);
+-
+-    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
+-	
++	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 32);
++	phyData &= (~(FAL_PHY_ADV_2500T_FD | FAL_PHY_ADV_5000T_FD | FAL_PHY_ADV_10000T_FD));
++	phyData |= (autoneg & FAL_PHY_ADV_2500T_FD) ? (FAL_PHY_ADV_2500T_FD) : (0);
++	phyData |= (autoneg & FAL_PHY_ADV_5000T_FD) ? (FAL_PHY_ADV_5000T_FD) : (0);
+ 
+-    phyData &= (~(0x4000 | 0x2000 | 0x1000));
+-    phyData |= (autoneg & 1 << 12) ? (0x0080) : (0);
+-    phyData |= (autoneg & 1 << 13) ? (0x0100) : (0);
+-    phyData |= (autoneg & 1 << 14) ? (0x1000) : (0);
+-
+-    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
+-     
+-	
++	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_VEND2, 0xA412);
+-
+-
+-    phyData &= (~(0x0100 | 0x0200));
+-    phyData |= (autoneg & 1 << 9) ? (0x0200) : (0);
+-//    phyData |= (autoneg & 1 << 5) ? (0x0200) : (0);
++	phyData &= (~(0x0100 | FAL_PHY_ADV_1000T_FD));
++	phyData |= (autoneg & FAL_PHY_ADV_1000T_FD) ? (FAL_PHY_ADV_1000T_FD) : (0);
+ 
+     phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_VEND2, 0xA412, phyData);
+         
+-- 
+2.34.1
+

feeds/tip/tip-defaults/files/usr/bin/mem_monitor.sh

@@ -0,0 +1,324 @@
+#!/bin/sh
+PRIMARY_DIR="/root/mem_usage"
+PRIMARY_FALLBACK_DIR="/tmp/mem_usage_live"
+ARCHIVE_DIR="/tmp/mem_usage"
+ARCHIVE_TMP_DIR="/tmp/mem_usage_tmp"
+
+# thresholds
+PRIMARY_MAX_BYTES=$((3 * 1024 * 1024))   # 3 MB
+ARCHIVE_MAX_BYTES=$((15 * 1024 * 1024))  # 15 MB
+RETENTION_DAYS=7                         # remove archives older than this
+SLEEP_INTERVAL=10                       # 15 minutes between collections
+KMEMLEAK_IFACE="/sys/kernel/debug/kmemleak"
+# Ensure primary dir writable, otherwise fallback
+if [ ! -d "$PRIMARY_DIR" ] || [ ! -w "$PRIMARY_DIR" ]; then
+    mkdir -p "$PRIMARY_DIR" 2>/dev/null || true
+fi
+if [ ! -d "$PRIMARY_DIR" ] || [ ! -w "$PRIMARY_DIR" ]; then
+    PRIMARY_DIR="$PRIMARY_FALLBACK_DIR"
+    mkdir -p "$PRIMARY_DIR" 2>/dev/null || true
+fi
+
+# Ensure archive dir exists
+mkdir -p "$ARCHIVE_DIR" 2>/dev/null || true
+mkdir -p "$ARCHIVE_TMP_DIR" 2>/dev/null || true
+mkdir -p "$PRIMARY_DIR" 2>/dev/null || true
+
+# Host identity
+MAC="$(uci get system.@system[0].hostname)"
+MAC="${MAC:-}"
+
+log() { printf '%s %s\n' "$(date '+%Y-%m-%d %H:%M:%S')" "$*" >&2; }
+
+dir_size_bytes() {
+    t="$1"
+    if [ ! -d "$t" ]; then echo 0; return 0; fi
+    kb=$(du -s "$t" 2>/dev/null | awk '{print $1}')
+    if [ -z "$kb" ]; then echo 0; else echo $((kb * 1024)); fi
+}
+
+# Ensure archive total size <= ARCHIVE_MAX_BYTES by deleting oldest tar.gz
+enforce_archive_size_limit() {
+    [ -d "$ARCHIVE_DIR" ] || return 0
+    total=$(dir_size_bytes "$ARCHIVE_DIR")
+    if [ "$total" -le "$ARCHIVE_MAX_BYTES" ]; then return 0; fi
+
+    ls -1tr -- "$ARCHIVE_DIR"/*.tar.gz 2>/dev/null | while IFS= read -r af; do
+        if [ -z "$af" ]; then break; fi
+        rm -f -- "$af" && log "INFO: removed oldest archive $af to free space"
+        total=$(dir_size_bytes "$ARCHIVE_DIR")
+        if [ "$total" -le "$ARCHIVE_MAX_BYTES" ]; then break; fi
+    done
+}
+
+# Create a single tarball containing ALL files from PRIMARY_DIR and move to ARCHIVE_DIR.
+tar_all_primary_now() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    tar_name="memtracker_all_${ts}.tar.gz"
+    tmp_tar="${ARCHIVE_TMP_DIR}/${tar_name}.partial.$$"
+    tar_err="${ARCHIVE_TMP_DIR}/tar_err_all.$$"
+
+    if [ ! -d "$PRIMARY_DIR" ]; then
+        echo "ERROR: PRIMARY_DIR '$PRIMARY_DIR' missing" >&2
+        return 1
+    fi
+
+    set -- "$PRIMARY_DIR"/*
+    if [ ! -e "$1" ]; then
+        echo "DEBUG: no files in $PRIMARY_DIR to archive" >&2
+        return 2
+    fi
+
+    (
+        cd "$PRIMARY_DIR" || { echo "ERROR: cannot cd $PRIMARY_DIR" >&2; exit 3; }
+        if ! tar -czf "$tmp_tar" . 2>"$tar_err"; then
+            echo "ERROR: tar failed (see $tar_err)" >&2
+            [ -f "$tmp_tar" ] && rm -f "$tmp_tar"
+            exit 4
+        fi
+        exit 0
+    )
+    rc=$?
+    if [ $rc -ne 0 ]; then
+        return $rc
+    fi
+
+    if [ ! -d "$ARCHIVE_DIR" ]; then
+        mkdir -p "$ARCHIVE_DIR" 2>/dev/null || {
+            echo "WARN: cannot create ARCHIVE_DIR $ARCHIVE_DIR; leaving tar in $ARCHIVE_TMP_DIR" >&2
+            mv -f "$tmp_tar" "${ARCHIVE_TMP_DIR}/${tar_name}" 2>/dev/null || true
+            return 5
+        }
+    fi
+
+    if mv -f "$tmp_tar" "$ARCHIVE_DIR/$tar_name" 2>/dev/null; then
+        sync || true
+        find "$PRIMARY_DIR" -maxdepth 1 -type f -print0 2>/dev/null |
+        while IFS= read -r -d '' src; do rm -f -- "$src"; done
+        echo "INFO: archived all -> $ARCHIVE_DIR/$tar_name" >&2
+        return 0
+    fi
+
+    if cp -f "$tmp_tar" "$ARCHIVE_DIR/$tar_name" 2>/dev/null; then
+        sync || true
+        rm -f "$tmp_tar"
+        find "$PRIMARY_DIR" -maxdepth 1 -type f -print0 2>/dev/null |
+        while IFS= read -r -d '' src; do rm -f -- "$src"; done
+        echo "INFO: copied archive -> $ARCHIVE_DIR/$tar_name (fallback)" >&2
+        return 0
+    fi
+
+    mv -f "$tmp_tar" "${ARCHIVE_TMP_DIR}/${tar_name}" 2>/dev/null || true
+    echo "WARN: failed to move/copy $tar_name to $ARCHIVE_DIR; kept ${ARCHIVE_TMP_DIR}/${tar_name}" >&2
+    return 6
+}
+
+collect_meminfo() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    out="$PRIMARY_DIR/meminfo_${ts}.csv"
+
+    if [ ! -r /proc/meminfo ]; then
+        echo "ERROR: Cannot read /proc/meminfo" >&2
+        return 1
+    fi
+
+    {
+        # header
+        printf "timestamp,mac"
+        awk '{gsub(":", "", $1); printf ",%s", $1}' /proc/meminfo
+        printf "\n"
+
+        # row of values
+        printf "%s,%s" "$ts" "$MAC"
+        awk '{printf ",%s", $2}' /proc/meminfo
+        printf "\n"
+    } > "$out"
+
+    echo "Collected meminfo  -> $out"
+}
+
+collect_slabinfo() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    out="$PRIMARY_DIR/slabinfo_${ts}.csv"
+
+    [ -r /proc/slabinfo ] || { echo "ERROR: Cannot read /proc/slabinfo" >&2; return 1; }
+
+    awk -v ts="$ts" -v mac="$MAC" '
+    BEGIN {
+        OFS = ","
+        ncount = 0
+    }
+    /^slabinfo/ { next }
+    /^#/ { next }
+    {
+        line = $0
+        # split into up to 3 parts by ":" (some lines contain two ":" separators)
+        parts_count = split(line, parts, ":")
+
+        # trim leading/trailing whitespace from parts[1]
+        gsub(/^[[:space:]]+|[[:space:]]+$/, "", parts[1])
+
+        # parse first segment tokens (name + first numeric columns)
+        toks0_count = split(parts[1], t0, /[[:space:]]+/)
+        name_raw = (toks0_count >= 1 ? t0[1] : "")
+        # sanitize name to be CSV-safe
+        name = name_raw
+        gsub(/[^A-Za-z0-9_]/, "_", name)
+
+        active      = (toks0_count >= 2 ? t0[2] : 0)
+        num_objs    = (toks0_count >= 3 ? t0[3] : 0)
+        objsize     = (toks0_count >= 4 ? t0[4] : 0)
+        objperslab  = (toks0_count >= 5 ? t0[5] : 0)
+        #pagesperslab= (toks0_count >= 6 ? t0[6] : 0)
+
+        # tunables: parse parts[2] if present
+        tun_limit = tun_batch = tun_shared = 0
+        if (parts_count >= 2) {
+            # trim whitespace
+            gsub(/^[[:space:]]+|[[:space:]]+$/, "", parts[2])
+            ni = split(parts[2], t1, /[[:space:]]+/)
+            # pick last 3 numeric tokens (limit, batchcount, sharedfactor)
+            cnt = 0
+            for (i = ni; i >= 1 && cnt < 3; i--) {
+                if (t1[i] ~ /^[0-9]+$/) {
+                    if (cnt == 0) tun_shared = t1[i]
+                    else if (cnt == 1) tun_batch = t1[i]
+                    else if (cnt == 2) tun_limit = t1[i]
+                    cnt++
+                }
+            }
+        }
+
+        # slabdata: usually parts[3]; if missing, it may be in parts[2] - we try parts[3] first
+        active_slabs = num_slabs = sharedavail = 0
+        if (parts_count >= 3) {
+            gsub(/^[[:space:]]+|[[:space:]]+$/, "", parts[3])
+            ni2 = split(parts[3], t2, /[[:space:]]+/)
+            cnt2 = 0
+            for (i = ni2; i >= 1 && cnt2 < 3; i--) {
+                if (t2[i] ~ /^[0-9]+$/) {
+                    if (cnt2 == 0) sharedavail = t2[i]
+                    else if (cnt2 == 1) num_slabs = t2[i]
+                    else if (cnt2 == 2) active_slabs = t2[i]
+                    cnt2++
+                }
+            }
+        } else if (parts_count == 2) {
+            # fallback: try to extract slabdata numeric suffix from parts[2]
+            ni2 = split(parts[2], t2, /[[:space:]]+/)
+            cnt2 = 0
+            for (i = ni2; i >= 1 && cnt2 < 3; i--) {
+                if (t2[i] ~ /^[0-9]+$/) {
+                    if (cnt2 == 0) sharedavail = t2[i]
+                    else if (cnt2 == 1) num_slabs = t2[i]
+                    else if (cnt2 == 2) active_slabs = t2[i]
+                    cnt2++
+                }
+            }
+        }
+
+        # store values
+        names[++ncount] = name
+        vals[name, "active"] = active
+        vals[name, "num_objs"] = num_objs
+        vals[name, "objsize"] = objsize
+        #vals[name, "objperslab"] = objperslab
+        #vals[name, "pagesperslab"] = pagesperslab
+        #vals[name, "tun_limit"] = tun_limit
+        #vals[name, "tun_batch"] = tun_batch
+        #vals[name, "tun_shared"] = tun_shared
+        #vals[name, "active_slabs"] = active_slabs
+        #vals[name, "num_slabs"] = num_slabs
+        #vals[name, "sharedavail"] = sharedavail
+    }
+    END {
+        # Header
+        printf "timestamp%smac", OFS
+        for (i = 1; i <= ncount; i++) {
+            nm = names[i]
+            printf "%s%s_active", OFS, nm
+            printf "%s%s_num_objs", OFS, nm
+            printf "%s%s_objsize", OFS, nm
+            #printf "%s%s_objperslab", OFS, nm
+            #printf "%s%s_pagesperslab", OFS, nm
+            #printf "%s%s_tun_limit", OFS, nm
+            #printf "%s%s_tun_batch", OFS, nm
+            #printf "%s%s_tun_shared", OFS, nm
+            #printf "%s%s_active_slabs", OFS, nm
+            #printf "%s%s_num_slabs", OFS, nm
+            #printf "%s%s_sharedavail", OFS, nm
+        }
+        printf "\n"
+
+        # Values row
+        printf "%s%s%s", ts, OFS, mac
+        for (i = 1; i <= ncount; i++) {
+            nm = names[i]
+            printf "%s%s", OFS, (vals[nm, "active"] != "" ? vals[nm, "active"] : 0)
+            printf "%s%s", OFS, (vals[nm, "num_objs"] != "" ? vals[nm, "num_objs"] : 0)
+            printf "%s%s", OFS, (vals[nm, "objsize"] != "" ? vals[nm, "objsize"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "objperslab"] != "" ? vals[nm, "objperslab"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "pagesperslab"] != "" ? vals[nm, "pagesperslab"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "tun_limit"] != "" ? vals[nm, "tun_limit"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "tun_batch"] != "" ? vals[nm, "tun_batch"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "tun_shared"] != "" ? vals[nm, "tun_shared"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "active_slabs"] != "" ? vals[nm, "active_slabs"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "num_slabs"] != "" ? vals[nm, "num_slabs"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "sharedavail"] != "" ? vals[nm, "sharedavail"] : 0)
+        }
+        printf "\n"
+    }' /proc/slabinfo > "$out" 2>/dev/null || { echo "ERROR: slabinfo parsing failed" >&2; return 2; }
+
+    echo "Collected slabinfo  -> $out"
+    return 0
+}
+
+collect_kmemleak() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    out="$PRIMARY_DIR/kmemleak_${ts}.txt"
+
+    if [ ! -d "$(dirname "$KMEMLEAK_IFACE")" ] || [ ! -e "$KMEMLEAK_IFACE" ]; then
+        echo "WARN: kmemleak interface not present at $KMEMLEAK_IFACE" >&2
+        return 1
+    fi
+
+    # Trigger kernel scan (best-effort; may require root)
+    if [ -w "$KMEMLEAK_IFACE" ]; then
+        # echo "scan" returns nothing; do it in a safe way
+        echo scan > "$KMEMLEAK_IFACE" 2>/dev/null || true
+        # small pause to let kernel produce a report (optional)
+        sleep 1
+    fi
+
+    # Save the current kmemleak output (read-only)
+    if [ -r "$KMEMLEAK_IFACE" ]; then
+        # prefix with timestamp for clarity
+        printf 'kmemleak snapshot: %s\n\n' "$ts" > "$out"
+        cat "$KMEMLEAK_IFACE" >> "$out" 2>/dev/null || true
+        sync || true
+        echo "Collected kmemleak -> $out"
+        return 0
+    else
+        echo "ERROR: cannot read $KMEMLEAK_IFACE" >&2
+        return 2
+    fi
+}
+
+log "Starting mem_monitor. PRIMARY_DIR=$PRIMARY_DIR ARCHIVE_DIR=$ARCHIVE_DIR"
+while true; do
+
+    collect_meminfo
+    collect_slabinfo
+    collect_kmemleak
+
+    prim_size=$(du -s "$PRIMARY_DIR" 2>/dev/null | awk '{print $1}')
+    prim_size=$(( prim_size * 1024 ))  # convert KB to bytes
+    if [ "$prim_size" -ge "$PRIMARY_MAX_BYTES" ]; then
+        echo "DEBUG: PRIMARY threshold reached: ${prim_size} bytes >= ${PRIMARY_MAX_BYTES}" >&2
+        tar_all_primary_now || echo "WARN: tar_all_primary_now returned $?" >&2
+    fi
+
+    enforce_archive_size_limit
+
+    sleep "$SLEEP_INTERVAL"
+done

feeds/ucentral/rrmd/files/etc/init.d/rrmd

@@ -6,8 +6,8 @@ STOP=01
 USE_PROCD=1
 
 start_service() {
-	rm -rf /tmp/threshold_breach_count_phy*
-	rm -rf /tmp/fixed_channel_phy*
+	rm -rf /tmp/threshold_breach_count*
+	rm -rf /tmp/fixed_channel*
 
 	procd_open_instance
 	procd_set_param command /usr/bin/rrmd.uc

feeds/ucentral/rrmd/files/usr/share/rrmd/policy_chanutil.uc

@@ -265,7 +265,7 @@ function dfs_chan_check(iface_num, rcs_channel) {
 }
 
 function fixed_channel_config(iface, iface_num, fixed_channel_f, auto_channel_f, fixed_chan_bkp, channel_config) {
-    // if fixed channel config is stored in the /tmp/fixed_channel_phyX file
+    // if fixed channel config is stored in the /tmp/fixed_channel_<radio_iface> file
     if (fixed_channel_f == 1) {
         if (auto_channel_f == 1) {
             // if current channel is auto => change to fixed
@@ -675,7 +675,7 @@ function channel_optimize() {
                 ulog_info(`[%s] Allowed consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], config.consecutive_threshold_breach);
 
                 if (!current_threshold_breach_count || current_threshold_breach_count == null || current_threshold_breach_count == 'NaN') {
-                    // /tmp/phyX_breachcount file doesn't exist yet or has invalid value
+                    // /tmp/threshold_breach_count_<radio_iface> file doesn't exist yet or has invalid value
                     current_threshold_breach_count = 0;
                 }
                 ulog_info(`[%s] Previous consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], current_threshold_breach_count);

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=cd070141672c85e72001e2e36616aa7159c6dc8ca4bbacca1b61a41c145cde2f
+PKG_MIRROR_HASH:=280d87658fa36c1d5d6852dcb8203042eba6bbc9101ac317a2088e2dd68249da
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2025-01-27
-PKG_SOURCE_VERSION:=048a53d4a6cf3ef570dab9e2d10989844ae7c355
+PKG_SOURCE_VERSION:=52afdf8f1d1cb8445b6b56eba3768d0edffa63e1
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/Makefile

@@ -3,12 +3,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=ucentral-tools
 PKG_RELEASE:=1
 
-PKG_SOURCE_URL=https://github.com/blogic/ucentral-tools.git
-PKG_MIRROR_HASH:=9ae6a0cd431595871c233550427c4043c2ba7ddb3c5d87e46ab74a03b2b5a947
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-01-28
-PKG_SOURCE_VERSION:=b013fc636e48d407870a46aaa68a09ed74de8d6f
-
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/src/CMakeLists.txt

@@ -0,0 +1,36 @@
+cmake_minimum_required(VERSION 2.6)
+
+PROJECT(openwifi-tools C)
+INCLUDE(GNUInstallDirs)
+ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
+
+SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
+
+ADD_EXECUTABLE(firstcontact firstcontact.c)
+TARGET_LINK_LIBRARIES(firstcontact curl crypto ssl ubox)
+INSTALL(TARGETS firstcontact
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(dhcpdiscover dhcpdiscover.c)
+INSTALL(TARGETS dhcpdiscover
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(dnsprobe dnsprobe.c)
+TARGET_LINK_LIBRARIES(dnsprobe ubox resolv)
+INSTALL(TARGETS dnsprobe
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(radiusprobe radiusprobe.c)
+TARGET_LINK_LIBRARIES(radiusprobe radcli)
+INSTALL(TARGETS radiusprobe
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(ip-collide ip-collide.c)
+TARGET_LINK_LIBRARIES(ip-collide ubox)
+INSTALL(TARGETS ip-collide
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)

feeds/ucentral/ucentral-tools/src/dnsprobe.c

@@ -0,0 +1,690 @@
+/*
+ * nslookup_lede - musl compatible replacement for busybox nslookup
+ *
+ * Copyright (C) 2017 Jo-Philipp Wich <jo@mein.io>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+//config:config NSLOOKUP_OPENWRT
+//config:	bool "nslookup_openwrt"
+//config:	depends on !NSLOOKUP
+//config:	default y
+//config:	help
+//config:	  nslookup is a tool to query Internet name servers (LEDE flavor).
+//config:
+//config:config FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
+//config:       bool "Enable long options"
+//config:       default y
+//config:       depends on NSLOOKUP_OPENWRT && LONG_OPTS
+//config:       help
+//config:         Support long options for the nslookup applet.
+
+//applet:IF_NSLOOKUP_OPENWRT(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_NSLOOKUP_OPENWRT) += nslookup_lede.o
+
+//usage:#define nslookup_lede_trivial_usage
+//usage:       "[HOST] [SERVER]"
+//usage:#define nslookup_lede_full_usage "\n\n"
+//usage:       "Query the nameserver for the IP address of the given HOST\n"
+//usage:       "optionally using a specified DNS server"
+//usage:
+//usage:#define nslookup_lede_example_usage
+//usage:       "$ nslookup localhost\n"
+//usage:       "Server:     default\n"
+//usage:       "Address:    default\n"
+//usage:       "\n"
+//usage:       "Name:       debian\n"
+//usage:       "Address:    127.0.0.1\n"
+
+#include <stdio.h>
+#include <resolv.h>
+#include <string.h>
+#include <errno.h>
+#include <time.h>
+#include <poll.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/socket.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <netdb.h>
+
+#include <libubox/ulog.h>
+
+#define ENABLE_FEATURE_IPV6	1
+
+typedef struct len_and_sockaddr {
+	socklen_t len;
+	union {
+		struct sockaddr sa;
+		struct sockaddr_in sin;
+#if ENABLE_FEATURE_IPV6
+		struct sockaddr_in6 sin6;
+#endif
+	} u;
+} len_and_sockaddr;
+
+struct ns {
+	const char *name;
+	len_and_sockaddr addr;
+	int failures;
+	int replies;
+};
+
+struct query {
+	const char *name;
+	size_t qlen, rlen;
+	unsigned char query[512], reply[512];
+	unsigned long latency;
+	int rcode, n_ns;
+};
+
+static const char *rcodes[] = {
+	"NOERROR",
+	"FORMERR",
+	"SERVFAIL",
+	"NXDOMAIN",
+	"NOTIMP",
+	"REFUSED",
+	"YXDOMAIN",
+	"YXRRSET",
+	"NXRRSET",
+	"NOTAUTH",
+	"NOTZONE",
+	"RESERVED11",
+	"RESERVED12",
+	"RESERVED13",
+	"RESERVED14",
+	"RESERVED15",
+	"BADVERS"
+};
+
+static unsigned int default_port = 53;
+static unsigned int default_retry = 1;
+static unsigned int default_timeout = 2;
+
+
+static int parse_reply(const unsigned char *msg, size_t len, int *bb_style_counter)
+{
+	ns_msg handle;
+	ns_rr rr;
+	int i, n, rdlen;
+	const char *format = NULL;
+	char astr[INET6_ADDRSTRLEN], dname[MAXDNAME];
+	const unsigned char *cp;
+
+	if (ns_initparse(msg, len, &handle) != 0) {
+		//fprintf(stderr, "Unable to parse reply: %s\n", strerror(errno));
+		return -1;
+	}
+
+	for (i = 0; i < ns_msg_count(handle, ns_s_an); i++) {
+		if (ns_parserr(&handle, ns_s_an, i, &rr) != 0) {
+			//fprintf(stderr, "Unable to parse resource record: %s\n", strerror(errno));
+			return -1;
+		}
+
+		rdlen = ns_rr_rdlen(rr);
+
+		switch (ns_rr_type(rr))
+		{
+		case ns_t_a:
+			if (rdlen != 4) {
+				//fprintf(stderr, "Unexpected A record length\n");
+				return -1;
+			}
+			inet_ntop(AF_INET, ns_rr_rdata(rr), astr, sizeof(astr));
+			printf("Name:\t%s\nAddress: %s\n", ns_rr_name(rr), astr);
+			break;
+
+#if ENABLE_FEATURE_IPV6
+		case ns_t_aaaa:
+			if (rdlen != 16) {
+				//fprintf(stderr, "Unexpected AAAA record length\n");
+				return -1;
+			}
+			inet_ntop(AF_INET6, ns_rr_rdata(rr), astr, sizeof(astr));
+			printf("%s\thas AAAA address %s\n", ns_rr_name(rr), astr);
+			break;
+#endif
+
+		case ns_t_ns:
+			if (!format)
+				format = "%s\tnameserver = %s\n";
+			/* fall through */
+
+		case ns_t_cname:
+			if (!format)
+				format = "%s\tcanonical name = %s\n";
+			/* fall through */
+
+		case ns_t_ptr:
+			if (!format)
+				format = "%s\tname = %s\n";
+			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+				ns_rr_rdata(rr), dname, sizeof(dname)) < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+			printf(format, ns_rr_name(rr), dname);
+			break;
+
+		case ns_t_mx:
+			if (rdlen < 2) {
+				fprintf(stderr, "MX record too short\n");
+				return -1;
+			}
+			n = ns_get16(ns_rr_rdata(rr));
+			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+				ns_rr_rdata(rr) + 2, dname, sizeof(dname)) < 0) {
+				//fprintf(stderr, "Cannot uncompress MX domain: %s\n", strerror(errno));
+				return -1;
+			}
+			printf("%s\tmail exchanger = %d %s\n", ns_rr_name(rr), n, dname);
+			break;
+
+		case ns_t_txt:
+			if (rdlen < 1) {
+				//fprintf(stderr, "TXT record too short\n");
+				return -1;
+			}
+			n = *(unsigned char *)ns_rr_rdata(rr);
+			if (n > 0) {
+				memset(dname, 0, sizeof(dname));
+				memcpy(dname, ns_rr_rdata(rr) + 1, n);
+				printf("%s\ttext = \"%s\"\n", ns_rr_name(rr), dname);
+			}
+			break;
+
+		case ns_t_soa:
+			if (rdlen < 20) {
+				//fprintf(stderr, "SOA record too short\n");
+				return -1;
+			}
+
+			printf("%s\n", ns_rr_name(rr));
+
+			cp = ns_rr_rdata(rr);
+			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+			                       cp, dname, sizeof(dname));
+
+			if (n < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+
+			printf("\torigin = %s\n", dname);
+			cp += n;
+
+			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+			                       cp, dname, sizeof(dname));
+
+			if (n < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+
+			printf("\tmail addr = %s\n", dname);
+			cp += n;
+
+			printf("\tserial = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\trefresh = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\tretry = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\texpire = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\tminimum = %lu\n", ns_get32(cp));
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	return i;
+}
+
+static int parse_nsaddr(const char *addrstr, len_and_sockaddr *lsa)
+{
+	char *eptr, *hash, ifname[IFNAMSIZ];
+	unsigned int port = default_port;
+	unsigned int scope = 0;
+
+	hash = strchr(addrstr, '#');
+
+	if (hash) {
+		*hash++ = '\0';
+		port = strtoul(hash, &eptr, 10);
+
+		if (eptr == hash || *eptr != '\0' || port > 65535) {
+			errno = EINVAL;
+			return -1;
+		}
+	}
+
+	hash = strchr(addrstr, '%');
+
+	if (hash) {
+		for (eptr = ++hash; *eptr != '\0' && *eptr != '#'; eptr++) {
+			if ((eptr - hash) >= IFNAMSIZ) {
+				errno = ENODEV;
+				return -1;
+			}
+
+			ifname[eptr - hash] = *eptr;
+		}
+
+		ifname[eptr - hash] = '\0';
+		scope = if_nametoindex(ifname);
+
+		if (scope == 0) {
+			errno = ENODEV;
+			return -1;
+		}
+	}
+
+#if ENABLE_FEATURE_IPV6
+	if (inet_pton(AF_INET6, addrstr, &lsa->u.sin6.sin6_addr)) {
+		lsa->u.sin6.sin6_family = AF_INET6;
+		lsa->u.sin6.sin6_port = htons(port);
+		lsa->u.sin6.sin6_scope_id = scope;
+		lsa->len = sizeof(lsa->u.sin6);
+		return 0;
+	}
+#endif
+
+	if (!scope && inet_pton(AF_INET, addrstr, &lsa->u.sin.sin_addr)) {
+		lsa->u.sin.sin_family = AF_INET;
+		lsa->u.sin.sin_port = htons(port);
+		lsa->len = sizeof(lsa->u.sin);
+		return 0;
+	}
+
+	errno = EINVAL;
+	return -1;
+}
+
+static unsigned long mtime(void)
+{
+	struct timespec ts;
+	clock_gettime(CLOCK_REALTIME, &ts);
+	return (unsigned long)ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
+}
+
+#if ENABLE_FEATURE_IPV6
+static void to_v4_mapped(len_and_sockaddr *a)
+{
+	if (a->u.sa.sa_family != AF_INET)
+		return;
+
+	memcpy(a->u.sin6.sin6_addr.s6_addr + 12,
+	       &a->u.sin.sin_addr, 4);
+
+	memcpy(a->u.sin6.sin6_addr.s6_addr,
+	       "\0\0\0\0\0\0\0\0\0\0\xff\xff", 12);
+
+	a->u.sin6.sin6_family = AF_INET6;
+	a->u.sin6.sin6_flowinfo = 0;
+	a->u.sin6.sin6_scope_id = 0;
+	a->len = sizeof(a->u.sin6);
+}
+#endif
+
+
+/*
+ * Function logic borrowed & modified from musl libc, res_msend.c
+ */
+
+static int send_queries(struct ns *ns, int n_ns, struct query *queries, int n_queries)
+{
+	int fd;
+	int timeout = default_timeout * 1000, retry_interval, servfail_retry = 0;
+	len_and_sockaddr from = { };
+#if ENABLE_FEATURE_IPV6
+	int one = 1;
+#endif
+	int recvlen = 0;
+	int n_replies = 0;
+	struct pollfd pfd;
+	unsigned long t0, t1, t2;
+	int nn, qn, next_query = 0;
+
+	from.u.sa.sa_family = AF_INET;
+	from.len = sizeof(from.u.sin);
+
+#if ENABLE_FEATURE_IPV6
+	for (nn = 0; nn < n_ns; nn++) {
+		if (ns[nn].addr.u.sa.sa_family == AF_INET6) {
+			from.u.sa.sa_family = AF_INET6;
+			from.len = sizeof(from.u.sin6);
+			break;
+		}
+	}
+#endif
+
+	/* Get local address and open/bind a socket */
+	fd = socket(from.u.sa.sa_family, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
+
+#if ENABLE_FEATURE_IPV6
+	/* Handle case where system lacks IPv6 support */
+	if (fd < 0 && from.u.sa.sa_family == AF_INET6 && errno == EAFNOSUPPORT) {
+		fd = socket(AF_INET, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
+		from.u.sa.sa_family = AF_INET;
+	}
+#endif
+
+	if (fd < 0)
+		return -1;
+
+	if (bind(fd, &from.u.sa, from.len) < 0) {
+		close(fd);
+		return -1;
+	}
+
+#if ENABLE_FEATURE_IPV6
+	/* Convert any IPv4 addresses in a mixed environment to v4-mapped */
+	if (from.u.sa.sa_family == AF_INET6) {
+		setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one));
+
+		for (nn = 0; nn < n_ns; nn++)
+			to_v4_mapped(&ns[nn].addr);
+	}
+#endif
+
+	pfd.fd = fd;
+	pfd.events = POLLIN;
+	retry_interval = timeout / default_retry;
+	t0 = t2 = mtime();
+	t1 = t2 - retry_interval;
+
+	for (; t2 - t0 < timeout; t2 = mtime()) {
+		if (t2 - t1 >= retry_interval) {
+			for (qn = 0; qn < n_queries; qn++) {
+				if (queries[qn].rlen)
+					continue;
+
+				for (nn = 0; nn < n_ns; nn++) {
+					sendto(fd, queries[qn].query, queries[qn].qlen,
+					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
+				}
+			}
+
+			t1 = t2;
+			servfail_retry = 2 * n_queries;
+		}
+
+		/* Wait for a response, or until time to retry */
+		if (poll(&pfd, 1, t1+retry_interval-t2) <= 0)
+			continue;
+
+		while (1) {
+			recvlen = recvfrom(fd, queries[next_query].reply,
+			                   sizeof(queries[next_query].reply), 0,
+			                   &from.u.sa, &from.len);
+
+			/* read error */
+			if (recvlen < 0)
+				break;
+
+			/* Ignore non-identifiable packets */
+			if (recvlen < 4)
+				continue;
+
+			/* Ignore replies from addresses we didn't send to */
+			for (nn = 0; nn < n_ns; nn++)
+				if (memcmp(&from.u.sa, &ns[nn].addr.u.sa, from.len) == 0)
+					break;
+
+			if (nn >= n_ns)
+				continue;
+
+			/* Find which query this answer goes with, if any */
+			for (qn = next_query; qn < n_queries; qn++)
+				if (!memcmp(queries[next_query].reply, queries[qn].query, 2))
+					break;
+
+			if (qn >= n_queries || queries[qn].rlen)
+				continue;
+
+			queries[qn].rcode = queries[next_query].reply[3] & 15;
+			queries[qn].latency = mtime() - t0;
+			queries[qn].n_ns = nn;
+
+			ns[nn].replies++;
+
+			/* Only accept positive or negative responses;
+			 * retry immediately on server failure, and ignore
+			 * all other codes such as refusal. */
+			switch (queries[qn].rcode) {
+			case 0:
+			case 3:
+				break;
+
+			case 2:
+				if (servfail_retry && servfail_retry--) {
+					ns[nn].failures++;
+					sendto(fd, queries[qn].query, queries[qn].qlen,
+					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
+				}
+				/* fall through */
+
+			default:
+				continue;
+			}
+
+			/* Store answer */
+			n_replies++;
+
+			queries[qn].rlen = recvlen;
+
+			if (qn == next_query) {
+				while (next_query < n_queries) {
+					if (!queries[next_query].rlen)
+						break;
+
+					next_query++;
+				}
+			}
+			else {
+				memcpy(queries[qn].reply, queries[next_query].reply, recvlen);
+			}
+
+			if (next_query >= n_queries)
+				return n_replies;
+		}
+	}
+
+	return n_replies;
+}
+
+static struct ns *add_ns(struct ns **ns, int *n_ns, const char *addr)
+{
+	char portstr[sizeof("65535")], *p;
+	len_and_sockaddr a = { };
+	struct ns *tmp;
+	struct addrinfo *ai, *aip, hints = {
+		.ai_flags = AI_NUMERICSERV,
+		.ai_socktype = SOCK_DGRAM
+	};
+
+	if (parse_nsaddr(addr, &a)) {
+		/* Maybe we got a domain name, attempt to resolve it using the standard
+		 * resolver routines */
+
+		p = strchr(addr, '#');
+		snprintf(portstr, sizeof(portstr), "%hu",
+		         (unsigned short)(p ? strtoul(p, NULL, 10) : default_port));
+
+		if (!getaddrinfo(addr, portstr, &hints, &ai)) {
+			for (aip = ai; aip; aip = aip->ai_next) {
+				if (aip->ai_addr->sa_family != AF_INET &&
+				    aip->ai_addr->sa_family != AF_INET6)
+					continue;
+
+#if ! ENABLE_FEATURE_IPV6
+				if (aip->ai_addr->sa_family != AF_INET)
+					continue;
+#endif
+
+				tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
+
+				if (!tmp)
+					return NULL;
+
+				*ns = tmp;
+
+				(*ns)[*n_ns].name = addr;
+				(*ns)[*n_ns].replies = 0;
+				(*ns)[*n_ns].failures = 0;
+				(*ns)[*n_ns].addr.len = aip->ai_addrlen;
+
+				memcpy(&(*ns)[*n_ns].addr.u.sa, aip->ai_addr, aip->ai_addrlen);
+
+				(*n_ns)++;
+			}
+
+			freeaddrinfo(ai);
+
+			return &(*ns)[*n_ns];
+		}
+
+		return NULL;
+	}
+
+	tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
+
+	if (!tmp)
+		return NULL;
+
+	*ns = tmp;
+
+	(*ns)[*n_ns].addr = a;
+	(*ns)[*n_ns].name = addr;
+	(*ns)[*n_ns].replies = 0;
+	(*ns)[*n_ns].failures = 0;
+
+	return &(*ns)[(*n_ns)++];
+}
+
+static struct query *add_query(struct query **queries, int *n_queries,
+                               int type, const char *dname)
+{
+	struct query *tmp;
+	ssize_t qlen;
+
+	tmp = realloc(*queries, sizeof(**queries) * (*n_queries + 1));
+
+	if (!tmp)
+		return NULL;
+
+	memset(&tmp[*n_queries], 0, sizeof(*tmp));
+
+	qlen = res_mkquery(QUERY, dname, C_IN, type, NULL, 0, NULL,
+	                   tmp[*n_queries].query, sizeof(tmp[*n_queries].query));
+
+	tmp[*n_queries].qlen = qlen;
+	tmp[*n_queries].name = dname;
+	*queries = tmp;
+
+	return &tmp[(*n_queries)++];
+}
+
+int main(int argc, char **argv)
+{
+	int rc = 1;
+	struct ns *ns = NULL;
+	struct query *queries = NULL;
+	int n_ns = 0, n_queries = 0;
+	int c = 0;
+
+	char *url = "telecominfraproject.com";
+	char *server = "127.0.0.1";
+	int v6 = 0;
+
+	while (1) {
+		int option = getopt(argc, argv, "u:s:i:6");
+
+		if (option == -1)
+			break;
+
+		switch (option) {
+		case '6':
+			v6 = 1;
+			break;
+		case 'u':
+			url = optarg;
+			break;
+		case 's':
+			server = optarg;
+			break;
+		default:
+		case 'h':
+			printf("Usage: dnsprobe OPTIONS\n"
+			       "  -6 - use ipv6\n"
+			       "  -u <url>\n"
+			       "  -s <server>\n");
+			return -1;
+		}
+	}
+
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "dnsprobe");
+
+	ULOG_INFO("attempting to probe dns - %s %s %s\n",
+		url, server, v6 ? "ipv6" : "");
+
+
+	add_query(&queries, &n_queries, v6 ? T_AAAA : T_A, url);
+
+	add_ns(&ns, &n_ns, server);
+
+	rc = send_queries(&ns[0], 1, queries, n_queries);
+	if (rc <= 0) {
+		fprintf(stderr, "Failed to send queries: %s\n", strerror(errno));
+		rc = -1;
+		goto out;
+	}
+
+	if (queries[0].rcode != 0) {
+		printf("** server can't find %s: %s\n", queries[0].name,
+		rcodes[queries[0].rcode]);
+		goto out;
+	}
+
+	if (queries[0].rlen) {
+		c = parse_reply(queries[0].reply, queries[0].rlen, NULL);
+	}
+
+	if (c == 0)
+		printf("*** Can't find %s: No answer\n", queries[0].name);
+	else if (c < 0)
+		printf("*** Can't find %s: Parse error\n", queries[0].name);
+	else
+		rc = 0;
+
+out:
+	if (n_ns)
+		free(ns);
+
+	if (n_queries)
+		free(queries);
+
+	return rc;
+}

feeds/ucentral/ucentral-tools/src/firstcontact.c

@@ -0,0 +1,100 @@
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <getopt.h>
+
+#include <curl/curl.h>
+
+#include <libubox/ulog.h>
+
+static const char *file_cert = "/etc/open-wifi/client.pem";
+static const char *file_key  = "/etc/open-wifi/client_dec.key";
+static const char *file_json = "/etc/open-wifi/redirector.json";
+static const char *file_dbg  = "/tmp/firstcontact.hdr";
+
+int main(int argc, char **argv)
+{
+	FILE *fp_json;
+	FILE *fp_dbg;
+	CURLcode res;
+	CURL *curl;
+	char *devid = NULL;
+	char *url;
+
+	while (1) {
+		int option = getopt(argc, argv, "k:c:o:hi:");
+
+		if (option == -1)
+			break;
+
+		switch (option) {
+		case 'k':
+			file_key = optarg;
+			break;
+		case 'c':
+			file_cert = optarg;
+			break;
+		case 'o':
+			file_json = optarg;
+			break;
+		case 'i':
+			devid = optarg;
+			break;
+		default:
+		case 'h':
+			printf("Usage: firstcontact OPTIONS\n"
+			       "  -k <keyfile>\n"
+			       "  -c <certfile>\n"
+			       "  -o <outfile>\n"
+			       "  -i <devid>\n");
+			return -1;
+		}
+	}
+
+	if (!devid) {
+		fprintf(stderr, "missing devid\n");
+		return -1;
+	}
+
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "firstcontact");
+	ULOG_INFO("attempting first contact\n");
+
+	fp_dbg = fopen(file_dbg, "wb");
+	fp_json = fopen(file_json, "wb");
+	if (!fp_json) {
+		ULOG_ERR("failed to create %s\n", file_json);
+		return -1;
+	}
+
+	curl_global_init(CURL_GLOBAL_DEFAULT);
+	curl = curl_easy_init();
+	if (!curl) {
+		ULOG_ERR("curl_easy_init failed\n");
+		return -1;
+	}
+
+	if (asprintf(&url, "https://clientauth.demo.one.digicert.com/iot/api/v2/device/%s", devid) < 0) {
+		ULOG_ERR("failed to assemble url\n");
+		return -1;
+	}
+
+	curl_easy_setopt(curl, CURLOPT_URL, url);
+	curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp_json);
+	curl_easy_setopt(curl, CURLOPT_HEADERDATA, fp_dbg);
+	curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLCERT, file_cert);
+	curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLKEY, file_key);
+	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
+
+	res = curl_easy_perform(curl);
+	if (res != CURLE_OK)
+		ULOG_ERR("curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
+	else
+		ULOG_INFO("downloaded first contact data\n");
+	curl_easy_cleanup(curl);
+	curl_global_cleanup();
+
+	ulog_close();
+
+	return (res != CURLE_OK);
+}

feeds/ucentral/ucentral-tools/src/ip-collide.c

@@ -0,0 +1,86 @@
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include <libubox/list.h>
+#include <libubox/ulog.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+struct route {
+	struct list_head list;
+	char devname[64];
+	uint32_t domain;
+	uint32_t mask;
+};
+
+static struct list_head routes = LIST_HEAD_INIT(routes);
+
+static int parse_routes(void)
+{
+	FILE *fp = fopen("/proc/net/route", "r");
+	int flgs, ref, use, metric, mtu, win, ir;
+	struct route *route;
+	unsigned long g;
+	int r;
+
+	r = fscanf(fp, "%*[^\n]\n");
+	if (r < 0) {
+		fprintf(stderr, "failed to parse routes\n");
+		return -1;
+	}
+	while (1) {
+		route = malloc(sizeof(*route));
+		if (!route)
+			break;
+		memset(route, 0, sizeof(*route));
+		r = fscanf(fp, "%63s%x%lx%X%d%d%d%x%d%d%d\n",
+			route->devname, &route->domain, &g, &flgs, &ref, &use, &metric, &route->mask,
+			&mtu, &win, &ir);
+		if (r != 11 && (r < 0) && feof(fp))
+			break;
+		list_add(&route->list, &routes);
+		printf("1 %s %x %x\n", route->devname, ntohl(route->domain), ntohl(route->mask));
+	}
+
+	fclose(fp);
+
+	return 0;
+}
+
+static int find_collisions(void)
+{
+	struct route *route;
+
+	list_for_each_entry(route, &routes, list) {
+		struct route *compare;
+
+		if (!route->domain || !route->mask)
+			continue;
+		list_for_each_entry(compare, &routes, list) {
+			if (!compare->domain || !compare->mask)
+				continue;
+			if (compare == route)
+				continue;
+			if (((route->domain & route->mask) == (compare->domain & route->mask)) ||
+			    ((route->domain & compare->mask) == (compare->domain & compare->mask))) {
+				ULOG_ERR("collision detected\n");
+				return 1;
+			}
+		}
+	}
+	ULOG_INFO("no collision detected\n");
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "ip-collide");
+
+	parse_routes();
+	if (!list_empty(&routes))
+		return find_collisions();
+
+	return 0;
+}

feeds/ucentral/ucentral-tools/src/radiusprobe.c

@@ -0,0 +1,47 @@
+#include <stdio.h>
+#include <string.h>
+#include <radcli/radcli.h>
+
+int
+main(int argc, char **argv)
+{
+	int result;
+	char username[128];
+	char passwd[AUTH_PASS_LEN + 1];
+	VALUE_PAIR *send, *received;
+	uint32_t service;
+	rc_handle *rh;
+
+	/* Not needed if you already used openlog() */
+	rc_openlog("radiusprobe");
+
+	if ((rh = rc_read_config("/tmp/radius.conf")) == NULL)
+		return ERROR_RC;
+
+	strcpy(username, "healthcheck");
+	strcpy(passwd, "uCentral");
+
+	send = NULL;
+
+	if (rc_avpair_add(rh, &send, PW_USER_NAME, username, -1, 0) == NULL)
+		return ERROR_RC;
+
+	if (rc_avpair_add(rh, &send, PW_USER_PASSWORD, passwd, -1, 0) == NULL)
+		return ERROR_RC;
+
+	service = PW_AUTHENTICATE_ONLY;
+	if (rc_avpair_add(rh, &send, PW_SERVICE_TYPE, &service, -1, 0) == NULL)
+		return ERROR_RC;
+
+	result = rc_auth(rh, 0, send, &received, NULL);
+
+	if (result == OK_RC || result == REJECT_RC) {
+		fprintf(stderr, "RADIUS server OK\n");
+		result = 0;
+	} else {
+		fprintf(stderr, "RADIUS server failure\n");
+		result = -1;
+	}
+
+	return result;
+}

feeds/ucentral/udhcpinject/files/etc/config/dhcpinject

@@ -5,3 +5,6 @@
 #   list ssid 'EAP101-ERICHI'
 #   list ssid 'EAP101-AKIHO'
 #   list ssid 'EAP101-DAMAYU'
+#
+# config dhcpinject 'dhcpinject'
+#   option iface_count '6'

feeds/ucentral/udhcpinject/files/etc/init.d/dhcpinject

@@ -9,9 +9,9 @@ SERVICE_NAME="dhcpinject"
 PROG=/usr/bin/udhcpinject
 
 start_service() {
-    local ssid_list=""
     local ssids=""
     local ports=""
+    local ifaces=""
 
     # Function to process each ssid
     append_ssid() {
@@ -40,6 +40,9 @@ start_service() {
 
     # Get the list of ports
     config_list_foreach uplink port append_port
+
+    # Get the iface_count
+    config_get ifaces dhcpinject iface_count
     
     # Fallback to eth0 if no ports are specified
     if [ -z "$ports" ]; then
@@ -47,11 +50,11 @@ start_service() {
     fi
 
     # Optional: Log or echo for debugging
-    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports"
+    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports, IFACEs=$ifaces"
 
     procd_open_instance "$SERVICE_NAME"
     procd_set_param command $PROG
-    procd_set_param env SSIDs="$ssids" PORTs="$ports"
+    procd_set_param env SSIDs="$ssids" PORTs="$ports" IFACEs="$ifaces"
     procd_set_param respawn 3600 10 10
     procd_set_param file /etc/config/dhcpinject
     procd_set_param reload_signal SIGHUP

feeds/ucentral/udhcpinject/src/udhcpinject.c

@@ -26,6 +26,7 @@ struct iface_info *iface_map = NULL;
 static struct port_info *ports = NULL;
 int iface_count = 0;
 int port_count = 0;
+int total_iface = 0;
 static pcap_t *handle = NULL;
 static char *provided_ssids = NULL;
 static char *provided_ports = NULL;
@@ -192,6 +193,11 @@ int parse_ssids(const char *ssids) {
         return -1;
     }
 
+    if (iface_count != total_iface) {
+        syslog(LOG_ERR, "Expect %d but only %d interfaces were found.\n", total_iface, iface_count);
+        return -1;
+    }
+
     syslog(LOG_INFO, "Found %d matching interfaces\n", iface_count);
     return 0;
 }
@@ -310,7 +316,6 @@ void signal_handler(int sig) {
         exit(0);
     } else if (sig == SIGHUP) {
         syslog(LOG_INFO, "Received reload signal, reconfiguring...\n");
-        sleep(5);
         // Clean up existing resources
         cleanup_tc();
         
@@ -561,7 +566,19 @@ int main(int argc, char *argv[]) {
     signal(SIGTERM, signal_handler);
     signal(SIGHUP, signal_handler);
 
-    sleep(5);
+    // Read IFACEs from environment variable
+    char *iface_env = getenv("IFACEs");
+    if (!iface_env) {
+        syslog(LOG_ERR, "No IFACEs provided. Exiting...\n");
+        cleanup();
+        return 1;
+    }
+    total_iface = atoi(iface_env);
+    if (total_iface <= 0) {
+        syslog(LOG_ERR, "Invalid IFACEs value: %s. Exiting...\n", iface_env);
+        cleanup();
+        return 1;
+    }
 
     provided_ssids = getenv("SSIDs");
     syslog(LOG_INFO, "Provided SSIDs: %s\n", provided_ssids);
@@ -618,4 +635,4 @@ int main(int argc, char *argv[]) {
 
     cleanup();
     return 0;
-}
+}

profiles/sercomm_ap72tip-v4.yml

@@ -0,0 +1,16 @@
+---
+profile: sercomm_ap72tip-v4
+target: ipq53xx
+subtarget: generic
+description: Build image for the Sercomm AP72TIP-v4
+image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-v4-squashfs-sysupgrade.tar
+feeds:
+  - name: qca
+    path: ../../feeds/qca-wifi-7
+include:
+  - ucentral-ap
+packages:
+  - ipq53xx
+  - qca-ssdk-shell
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sercomm_ap72tip.yml

@@ -2,14 +2,14 @@
 profile: sercomm_ap72tip
 target: ipq53xx
 subtarget: generic
-description: Build image for the Sercomm AP72 TIP
+description: Build image for the Sercomm AP72TIP
 image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-squashfs-sysupgrade.tar
 feeds:
-  - name: ipq95xx
-    path: ../../feeds/ipq95xx
-packages:
-  - ipq53xx
+  - name: qca
+    path: ../../feeds/qca-wifi-7
 include:
   - ucentral-ap
+packages:
+  - ipq53xx
 diffconfig: |
   CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sonicfi_rap650c.yml

@@ -0,0 +1,15 @@
+---
+profile: sonicfi_rap650c
+target: ipq807x
+subtarget: generic
+description: Build image for the SonicFi RAP650C
+image: bin/targets/ipq807x/generic/openwrt-ipq807x-sonicfi_rap650c-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq807x
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0