add mem_monitor.sh script to monitor memomory usage

Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -341,7 +341,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_EFI is not set
 CONFIG_DEBUG_GPIO=y
 # CONFIG_DEBUG_INFO_REDUCED is not set
-# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=n
+CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
+CONFIG_DEBUG_KMEMLEAK_TEST=m
+CONFIG_SLUB_DEBUG=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_MISC is not set
 # CONFIG_DEBUG_PLIST is not set

feeds/ipq807x_v5.4/ipq60xx/config-5.4

@@ -342,7 +342,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_EFI is not set
 CONFIG_DEBUG_GPIO=y
 # CONFIG_DEBUG_INFO_REDUCED is not set
-# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=n
+CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
+CONFIG_DEBUG_KMEMLEAK_TEST=m
+CONFIG_SLUB_DEBUG=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_MISC is not set
 # CONFIG_DEBUG_PLIST is not set

feeds/ipq807x_v5.4/ipq807x/config-5.4

@@ -342,7 +342,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_EFI is not set
 CONFIG_DEBUG_GPIO=y
 # CONFIG_DEBUG_INFO_REDUCED is not set
-# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
+CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=n
+CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
+CONFIG_DEBUG_KMEMLEAK_TEST=m
+CONFIG_SLUB_DEBUG=y
 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_MISC is not set
 # CONFIG_DEBUG_PLIST is not set

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -44,9 +44,11 @@
 			uniphyaddr_fixup = <0xC90F014>;
 			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
 			tip,clk_div = <0xff>; /* MDIO Frequency reduction*/
+			limit_rtlphy_10g_ablity;
 
 			phy0: ethernet-phy@0 {
 				reg = <8>;
+				compatible ="ethernet-phy-ieee802.3-c45";
 			};
 
 			phy1: ethernet-phy@1 {

feeds/qca-wifi-7/ipq53xx/files-6.1/drivers/net/phy/rtk/rtk_phy.c

@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 
 #include "phy_rtl826xb_patch.h"
 #include "phy_rtl8251b_patch.h"
@@ -30,6 +31,7 @@ static int rtl8251_match_phy_device(struct phy_device *phydev)
 static int rtl826xb_get_features(struct phy_device *phydev)
 {
     int ret;
+    struct device_node *np;
     ret = genphy_c45_pma_read_abilities(phydev);
     if (ret)
         return ret;
@@ -48,6 +50,14 @@ static int rtl826xb_get_features(struct phy_device *phydev)
     linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
                        phydev->supported);
 
+    np = of_find_node_by_name(NULL, "mdio");
+    if (np)
+	if (of_property_read_bool(np, "limit_rtlphy_10g_ablity"))
+	{
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported);
+	}
+
+
     return 0;
 }
 
@@ -80,7 +90,6 @@ static int rtkphy_config_init(struct phy_device *phydev)
         case REALTEK_PHY_ID_RTL8261N:
         case REALTEK_PHY_ID_RTL8264B:
             phydev_info(phydev, "%s:%u [RTL8261N/RTL826XB] phy_id: 0x%X PHYAD:%d\n", __FUNCTION__, __LINE__, phydev->drv->phy_id, phydev->mdio.addr);
-	    phy_modify_mmd_changed(phydev, 7, 0x20, BIT(12), 0);
 
           #if 1 /* toggle reset */
             phy_modify_mmd_changed(phydev, 30, 0x145, BIT(0)  , 1);
@@ -213,7 +222,6 @@ static int rtkphy_c45_aneg_done(struct phy_device *phydev)
 static int rtkphy_c45_read_status(struct phy_device *phydev)
 {
     int ret = 0, status = 0;
-    uint16_t local;
     phydev->speed = SPEED_UNKNOWN;
     phydev->duplex = DUPLEX_UNKNOWN;
     phydev->pause = 0;
@@ -232,9 +240,6 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
         if (ret)
             return ret;
 	
-	phy_write_mmd(phydev, 7, 0x20, 0x181);
-	local = phy_read_mmd(phydev, 7, 0x20);
-
         status =  phy_read_mmd(phydev, 31, 0xA414);
         if (status < 0)
             return status;
@@ -242,11 +247,6 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
             phydev->lp_advertising, status & BIT(11));
 
         phy_resolve_aneg_linkmode(phydev);
-	if((phydev->speed == 10000) && (local == 0x181))
-        {
-                phydev->speed = 5000;
-                phydev->duplex = DUPLEX_FULL;
-        }
     }
     else
     {

feeds/qca-wifi-7/qca-ssdk-qca/patches/0006-qca-ssdk-Fix-10G-rtl-phy-driver-for-c45-mdio-read-wr.patch

@@ -0,0 +1,116 @@
+From 85a7c62d4e3385de1a379959dd45148cfdc95b3b Mon Sep 17 00:00:00 2001
+From: huangyunxiang <huangyunxiang@cigtech.com>
+Date: Tue, 29 Apr 2025 09:56:28 +0800
+Subject: [PATCH] qca-ssdk modify rtl826x phy mdio read/write as c45 mode and
+ clear 10G ablity
+
+---
+ src/hsl/phy/rtl826xb_phy.c                | 55 ++++++-------------
+ 1 file changed, 17 insertions(+), 38 deletions(-)
+
+diff --git a/src/hsl/phy/rtl826xb_phy.c b/src/hsl/phy/rtl826xb_phy.c
+index a336348aa9..9a67b45948 100644
+--- a/src/hsl/phy/rtl826xb_phy.c
++++ b/src/hsl/phy/rtl826xb_phy.c
+@@ -48,46 +48,39 @@ void rtl826xb_phy_lock_init(void)
+ 
+ static a_uint16_t rtl826x_phy_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
+-
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
++	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, reg_mmd, reg_id);
+ }
+ 
+ 
+ static sw_error_t rtl826x_phy_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id, a_uint16_t reg_val)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
+-
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, reg_val);
++	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, reg_mmd, reg_id, reg_val);
+ }
+ 
+ 
+ static a_uint16_t rtl826x_phy_reg_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg)
+ {
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg);
++	return hsl_phy_mii_reg_read(dev_id, phy_id, reg);
+ }
+ 
+ 
+ static sw_error_t rtl826x_phy_reg_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg, a_uint16_t reg_val)
+ {
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
++
++	return hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
+ }
+ 
+ 
+ static a_int16_t hal_miim_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
+-
+-	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
++	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg);
+ }
+ 
+ 
+ 
+ static a_int32_t hal_miim_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg, a_uint16_t phy_data)
+ {
+-	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
+-
+-	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, phy_data);
++	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg, phy_data);
+ }
+ 
+ 
+@@ -1281,34 +1274,20 @@ phy_826xb_autoNegoAbility_set(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t a
+ 	hsl_phy_phydev_autoneg_update(dev_id, phy_id, A_TRUE, autoneg);
+ 	
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 16);
++	phyData &= (~(0x0020 | 0x0040 | FAL_PHY_ADV_100TX_HD | FAL_PHY_ADV_100TX_FD | FAL_PHY_ADV_PAUSE | FAL_PHY_ADV_ASY_PAUSE));
++	phyData |= (autoneg & FAL_PHY_ADV_100TX_HD) ? (FAL_PHY_ADV_100TX_HD) : (0);
++	phyData |= ((autoneg & FAL_PHY_ADV_100TX_FD)) ? (FAL_PHY_ADV_100TX_FD) : (0);
+ 
+-    phyData &= (~(0x0020 | 0x0040 | 0x0080 | 0x0100 | 0x0400 | 0x0800));
+-	phyData |= ((autoneg & 1 << 1)) ? (0x0040) : (0);
+-    phyData |= ((autoneg & 1 << 2)) ? (0x0080) : (0);
+-    phyData |= ((autoneg & 1 << 3)) ? (0x0100) : (0);
+-	phyData |= ((autoneg & 1 << 4)) ? (0x0400) : (0);
+-	phyData |= ((autoneg & 1 << 5)) ? (0x0800) : (0);
+-//    phyData |= ((autoneg & 1 << 9)) ? (0x0400) : (0);
+-//    phyData |= ((autoneg & 1 << 10)) ? (0x0800) : (0);
+-
+-    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
+-	
++	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 32);
++	phyData &= (~(FAL_PHY_ADV_2500T_FD | FAL_PHY_ADV_5000T_FD | FAL_PHY_ADV_10000T_FD));
++	phyData |= (autoneg & FAL_PHY_ADV_2500T_FD) ? (FAL_PHY_ADV_2500T_FD) : (0);
++	phyData |= (autoneg & FAL_PHY_ADV_5000T_FD) ? (FAL_PHY_ADV_5000T_FD) : (0);
+ 
+-    phyData &= (~(0x4000 | 0x2000 | 0x1000));
+-    phyData |= (autoneg & 1 << 12) ? (0x0080) : (0);
+-    phyData |= (autoneg & 1 << 13) ? (0x0100) : (0);
+-    phyData |= (autoneg & 1 << 14) ? (0x1000) : (0);
+-
+-    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
+-     
+-	
++	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
+ 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_VEND2, 0xA412);
+-
+-
+-    phyData &= (~(0x0100 | 0x0200));
+-    phyData |= (autoneg & 1 << 9) ? (0x0200) : (0);
+-//    phyData |= (autoneg & 1 << 5) ? (0x0200) : (0);
++	phyData &= (~(0x0100 | FAL_PHY_ADV_1000T_FD));
++	phyData |= (autoneg & FAL_PHY_ADV_1000T_FD) ? (FAL_PHY_ADV_1000T_FD) : (0);
+ 
+     phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_VEND2, 0xA412, phyData);
+         
+-- 
+2.34.1
+

feeds/tip/tip-defaults/files/usr/bin/mem_monitor.sh

@@ -0,0 +1,324 @@
+#!/bin/sh
+PRIMARY_DIR="/root/mem_usage"
+PRIMARY_FALLBACK_DIR="/tmp/mem_usage_live"
+ARCHIVE_DIR="/tmp/mem_usage"
+ARCHIVE_TMP_DIR="/tmp/mem_usage_tmp"
+
+# thresholds
+PRIMARY_MAX_BYTES=$((3 * 1024 * 1024))   # 3 MB
+ARCHIVE_MAX_BYTES=$((15 * 1024 * 1024))  # 15 MB
+RETENTION_DAYS=7                         # remove archives older than this
+SLEEP_INTERVAL=10                       # 15 minutes between collections
+KMEMLEAK_IFACE="/sys/kernel/debug/kmemleak"
+# Ensure primary dir writable, otherwise fallback
+if [ ! -d "$PRIMARY_DIR" ] || [ ! -w "$PRIMARY_DIR" ]; then
+    mkdir -p "$PRIMARY_DIR" 2>/dev/null || true
+fi
+if [ ! -d "$PRIMARY_DIR" ] || [ ! -w "$PRIMARY_DIR" ]; then
+    PRIMARY_DIR="$PRIMARY_FALLBACK_DIR"
+    mkdir -p "$PRIMARY_DIR" 2>/dev/null || true
+fi
+
+# Ensure archive dir exists
+mkdir -p "$ARCHIVE_DIR" 2>/dev/null || true
+mkdir -p "$ARCHIVE_TMP_DIR" 2>/dev/null || true
+mkdir -p "$PRIMARY_DIR" 2>/dev/null || true
+
+# Host identity
+MAC="$(uci get system.@system[0].hostname)"
+MAC="${MAC:-}"
+
+log() { printf '%s %s\n' "$(date '+%Y-%m-%d %H:%M:%S')" "$*" >&2; }
+
+dir_size_bytes() {
+    t="$1"
+    if [ ! -d "$t" ]; then echo 0; return 0; fi
+    kb=$(du -s "$t" 2>/dev/null | awk '{print $1}')
+    if [ -z "$kb" ]; then echo 0; else echo $((kb * 1024)); fi
+}
+
+# Ensure archive total size <= ARCHIVE_MAX_BYTES by deleting oldest tar.gz
+enforce_archive_size_limit() {
+    [ -d "$ARCHIVE_DIR" ] || return 0
+    total=$(dir_size_bytes "$ARCHIVE_DIR")
+    if [ "$total" -le "$ARCHIVE_MAX_BYTES" ]; then return 0; fi
+
+    ls -1tr -- "$ARCHIVE_DIR"/*.tar.gz 2>/dev/null | while IFS= read -r af; do
+        if [ -z "$af" ]; then break; fi
+        rm -f -- "$af" && log "INFO: removed oldest archive $af to free space"
+        total=$(dir_size_bytes "$ARCHIVE_DIR")
+        if [ "$total" -le "$ARCHIVE_MAX_BYTES" ]; then break; fi
+    done
+}
+
+# Create a single tarball containing ALL files from PRIMARY_DIR and move to ARCHIVE_DIR.
+tar_all_primary_now() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    tar_name="memtracker_all_${ts}.tar.gz"
+    tmp_tar="${ARCHIVE_TMP_DIR}/${tar_name}.partial.$$"
+    tar_err="${ARCHIVE_TMP_DIR}/tar_err_all.$$"
+
+    if [ ! -d "$PRIMARY_DIR" ]; then
+        echo "ERROR: PRIMARY_DIR '$PRIMARY_DIR' missing" >&2
+        return 1
+    fi
+
+    set -- "$PRIMARY_DIR"/*
+    if [ ! -e "$1" ]; then
+        echo "DEBUG: no files in $PRIMARY_DIR to archive" >&2
+        return 2
+    fi
+
+    (
+        cd "$PRIMARY_DIR" || { echo "ERROR: cannot cd $PRIMARY_DIR" >&2; exit 3; }
+        if ! tar -czf "$tmp_tar" . 2>"$tar_err"; then
+            echo "ERROR: tar failed (see $tar_err)" >&2
+            [ -f "$tmp_tar" ] && rm -f "$tmp_tar"
+            exit 4
+        fi
+        exit 0
+    )
+    rc=$?
+    if [ $rc -ne 0 ]; then
+        return $rc
+    fi
+
+    if [ ! -d "$ARCHIVE_DIR" ]; then
+        mkdir -p "$ARCHIVE_DIR" 2>/dev/null || {
+            echo "WARN: cannot create ARCHIVE_DIR $ARCHIVE_DIR; leaving tar in $ARCHIVE_TMP_DIR" >&2
+            mv -f "$tmp_tar" "${ARCHIVE_TMP_DIR}/${tar_name}" 2>/dev/null || true
+            return 5
+        }
+    fi
+
+    if mv -f "$tmp_tar" "$ARCHIVE_DIR/$tar_name" 2>/dev/null; then
+        sync || true
+        find "$PRIMARY_DIR" -maxdepth 1 -type f -print0 2>/dev/null |
+        while IFS= read -r -d '' src; do rm -f -- "$src"; done
+        echo "INFO: archived all -> $ARCHIVE_DIR/$tar_name" >&2
+        return 0
+    fi
+
+    if cp -f "$tmp_tar" "$ARCHIVE_DIR/$tar_name" 2>/dev/null; then
+        sync || true
+        rm -f "$tmp_tar"
+        find "$PRIMARY_DIR" -maxdepth 1 -type f -print0 2>/dev/null |
+        while IFS= read -r -d '' src; do rm -f -- "$src"; done
+        echo "INFO: copied archive -> $ARCHIVE_DIR/$tar_name (fallback)" >&2
+        return 0
+    fi
+
+    mv -f "$tmp_tar" "${ARCHIVE_TMP_DIR}/${tar_name}" 2>/dev/null || true
+    echo "WARN: failed to move/copy $tar_name to $ARCHIVE_DIR; kept ${ARCHIVE_TMP_DIR}/${tar_name}" >&2
+    return 6
+}
+
+collect_meminfo() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    out="$PRIMARY_DIR/meminfo_${ts}.csv"
+
+    if [ ! -r /proc/meminfo ]; then
+        echo "ERROR: Cannot read /proc/meminfo" >&2
+        return 1
+    fi
+
+    {
+        # header
+        printf "timestamp,mac"
+        awk '{gsub(":", "", $1); printf ",%s", $1}' /proc/meminfo
+        printf "\n"
+
+        # row of values
+        printf "%s,%s" "$ts" "$MAC"
+        awk '{printf ",%s", $2}' /proc/meminfo
+        printf "\n"
+    } > "$out"
+
+    echo "Collected meminfo  -> $out"
+}
+
+collect_slabinfo() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    out="$PRIMARY_DIR/slabinfo_${ts}.csv"
+
+    [ -r /proc/slabinfo ] || { echo "ERROR: Cannot read /proc/slabinfo" >&2; return 1; }
+
+    awk -v ts="$ts" -v mac="$MAC" '
+    BEGIN {
+        OFS = ","
+        ncount = 0
+    }
+    /^slabinfo/ { next }
+    /^#/ { next }
+    {
+        line = $0
+        # split into up to 3 parts by ":" (some lines contain two ":" separators)
+        parts_count = split(line, parts, ":")
+
+        # trim leading/trailing whitespace from parts[1]
+        gsub(/^[[:space:]]+|[[:space:]]+$/, "", parts[1])
+
+        # parse first segment tokens (name + first numeric columns)
+        toks0_count = split(parts[1], t0, /[[:space:]]+/)
+        name_raw = (toks0_count >= 1 ? t0[1] : "")
+        # sanitize name to be CSV-safe
+        name = name_raw
+        gsub(/[^A-Za-z0-9_]/, "_", name)
+
+        active      = (toks0_count >= 2 ? t0[2] : 0)
+        num_objs    = (toks0_count >= 3 ? t0[3] : 0)
+        objsize     = (toks0_count >= 4 ? t0[4] : 0)
+        objperslab  = (toks0_count >= 5 ? t0[5] : 0)
+        #pagesperslab= (toks0_count >= 6 ? t0[6] : 0)
+
+        # tunables: parse parts[2] if present
+        tun_limit = tun_batch = tun_shared = 0
+        if (parts_count >= 2) {
+            # trim whitespace
+            gsub(/^[[:space:]]+|[[:space:]]+$/, "", parts[2])
+            ni = split(parts[2], t1, /[[:space:]]+/)
+            # pick last 3 numeric tokens (limit, batchcount, sharedfactor)
+            cnt = 0
+            for (i = ni; i >= 1 && cnt < 3; i--) {
+                if (t1[i] ~ /^[0-9]+$/) {
+                    if (cnt == 0) tun_shared = t1[i]
+                    else if (cnt == 1) tun_batch = t1[i]
+                    else if (cnt == 2) tun_limit = t1[i]
+                    cnt++
+                }
+            }
+        }
+
+        # slabdata: usually parts[3]; if missing, it may be in parts[2] - we try parts[3] first
+        active_slabs = num_slabs = sharedavail = 0
+        if (parts_count >= 3) {
+            gsub(/^[[:space:]]+|[[:space:]]+$/, "", parts[3])
+            ni2 = split(parts[3], t2, /[[:space:]]+/)
+            cnt2 = 0
+            for (i = ni2; i >= 1 && cnt2 < 3; i--) {
+                if (t2[i] ~ /^[0-9]+$/) {
+                    if (cnt2 == 0) sharedavail = t2[i]
+                    else if (cnt2 == 1) num_slabs = t2[i]
+                    else if (cnt2 == 2) active_slabs = t2[i]
+                    cnt2++
+                }
+            }
+        } else if (parts_count == 2) {
+            # fallback: try to extract slabdata numeric suffix from parts[2]
+            ni2 = split(parts[2], t2, /[[:space:]]+/)
+            cnt2 = 0
+            for (i = ni2; i >= 1 && cnt2 < 3; i--) {
+                if (t2[i] ~ /^[0-9]+$/) {
+                    if (cnt2 == 0) sharedavail = t2[i]
+                    else if (cnt2 == 1) num_slabs = t2[i]
+                    else if (cnt2 == 2) active_slabs = t2[i]
+                    cnt2++
+                }
+            }
+        }
+
+        # store values
+        names[++ncount] = name
+        vals[name, "active"] = active
+        vals[name, "num_objs"] = num_objs
+        vals[name, "objsize"] = objsize
+        #vals[name, "objperslab"] = objperslab
+        #vals[name, "pagesperslab"] = pagesperslab
+        #vals[name, "tun_limit"] = tun_limit
+        #vals[name, "tun_batch"] = tun_batch
+        #vals[name, "tun_shared"] = tun_shared
+        #vals[name, "active_slabs"] = active_slabs
+        #vals[name, "num_slabs"] = num_slabs
+        #vals[name, "sharedavail"] = sharedavail
+    }
+    END {
+        # Header
+        printf "timestamp%smac", OFS
+        for (i = 1; i <= ncount; i++) {
+            nm = names[i]
+            printf "%s%s_active", OFS, nm
+            printf "%s%s_num_objs", OFS, nm
+            printf "%s%s_objsize", OFS, nm
+            #printf "%s%s_objperslab", OFS, nm
+            #printf "%s%s_pagesperslab", OFS, nm
+            #printf "%s%s_tun_limit", OFS, nm
+            #printf "%s%s_tun_batch", OFS, nm
+            #printf "%s%s_tun_shared", OFS, nm
+            #printf "%s%s_active_slabs", OFS, nm
+            #printf "%s%s_num_slabs", OFS, nm
+            #printf "%s%s_sharedavail", OFS, nm
+        }
+        printf "\n"
+
+        # Values row
+        printf "%s%s%s", ts, OFS, mac
+        for (i = 1; i <= ncount; i++) {
+            nm = names[i]
+            printf "%s%s", OFS, (vals[nm, "active"] != "" ? vals[nm, "active"] : 0)
+            printf "%s%s", OFS, (vals[nm, "num_objs"] != "" ? vals[nm, "num_objs"] : 0)
+            printf "%s%s", OFS, (vals[nm, "objsize"] != "" ? vals[nm, "objsize"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "objperslab"] != "" ? vals[nm, "objperslab"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "pagesperslab"] != "" ? vals[nm, "pagesperslab"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "tun_limit"] != "" ? vals[nm, "tun_limit"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "tun_batch"] != "" ? vals[nm, "tun_batch"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "tun_shared"] != "" ? vals[nm, "tun_shared"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "active_slabs"] != "" ? vals[nm, "active_slabs"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "num_slabs"] != "" ? vals[nm, "num_slabs"] : 0)
+            #printf "%s%s", OFS, (vals[nm, "sharedavail"] != "" ? vals[nm, "sharedavail"] : 0)
+        }
+        printf "\n"
+    }' /proc/slabinfo > "$out" 2>/dev/null || { echo "ERROR: slabinfo parsing failed" >&2; return 2; }
+
+    echo "Collected slabinfo  -> $out"
+    return 0
+}
+
+collect_kmemleak() {
+    ts=$(date +%Y%m%d_%H%M%S)
+    out="$PRIMARY_DIR/kmemleak_${ts}.txt"
+
+    if [ ! -d "$(dirname "$KMEMLEAK_IFACE")" ] || [ ! -e "$KMEMLEAK_IFACE" ]; then
+        echo "WARN: kmemleak interface not present at $KMEMLEAK_IFACE" >&2
+        return 1
+    fi
+
+    # Trigger kernel scan (best-effort; may require root)
+    if [ -w "$KMEMLEAK_IFACE" ]; then
+        # echo "scan" returns nothing; do it in a safe way
+        echo scan > "$KMEMLEAK_IFACE" 2>/dev/null || true
+        # small pause to let kernel produce a report (optional)
+        sleep 1
+    fi
+
+    # Save the current kmemleak output (read-only)
+    if [ -r "$KMEMLEAK_IFACE" ]; then
+        # prefix with timestamp for clarity
+        printf 'kmemleak snapshot: %s\n\n' "$ts" > "$out"
+        cat "$KMEMLEAK_IFACE" >> "$out" 2>/dev/null || true
+        sync || true
+        echo "Collected kmemleak -> $out"
+        return 0
+    else
+        echo "ERROR: cannot read $KMEMLEAK_IFACE" >&2
+        return 2
+    fi
+}
+
+log "Starting mem_monitor. PRIMARY_DIR=$PRIMARY_DIR ARCHIVE_DIR=$ARCHIVE_DIR"
+while true; do
+
+    collect_meminfo
+    collect_slabinfo
+    collect_kmemleak
+
+    prim_size=$(du -s "$PRIMARY_DIR" 2>/dev/null | awk '{print $1}')
+    prim_size=$(( prim_size * 1024 ))  # convert KB to bytes
+    if [ "$prim_size" -ge "$PRIMARY_MAX_BYTES" ]; then
+        echo "DEBUG: PRIMARY threshold reached: ${prim_size} bytes >= ${PRIMARY_MAX_BYTES}" >&2
+        tar_all_primary_now || echo "WARN: tar_all_primary_now returned $?" >&2
+    fi
+
+    enforce_archive_size_limit
+
+    sleep "$SLEEP_INTERVAL"
+done

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=cd070141672c85e72001e2e36616aa7159c6dc8ca4bbacca1b61a41c145cde2f
+PKG_MIRROR_HASH:=280d87658fa36c1d5d6852dcb8203042eba6bbc9101ac317a2088e2dd68249da
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2025-01-27
-PKG_SOURCE_VERSION:=048a53d4a6cf3ef570dab9e2d10989844ae7c355
+PKG_SOURCE_VERSION:=52afdf8f1d1cb8445b6b56eba3768d0edffa63e1
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/Makefile

@@ -3,12 +3,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=ucentral-tools
 PKG_RELEASE:=1
 
-PKG_SOURCE_URL=https://github.com/blogic/ucentral-tools.git
-PKG_MIRROR_HASH:=9ae6a0cd431595871c233550427c4043c2ba7ddb3c5d87e46ab74a03b2b5a947
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-01-28
-PKG_SOURCE_VERSION:=b013fc636e48d407870a46aaa68a09ed74de8d6f
-
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/src/CMakeLists.txt

@@ -0,0 +1,36 @@
+cmake_minimum_required(VERSION 2.6)
+
+PROJECT(openwifi-tools C)
+INCLUDE(GNUInstallDirs)
+ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
+
+SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
+
+ADD_EXECUTABLE(firstcontact firstcontact.c)
+TARGET_LINK_LIBRARIES(firstcontact curl crypto ssl ubox)
+INSTALL(TARGETS firstcontact
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(dhcpdiscover dhcpdiscover.c)
+INSTALL(TARGETS dhcpdiscover
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(dnsprobe dnsprobe.c)
+TARGET_LINK_LIBRARIES(dnsprobe ubox resolv)
+INSTALL(TARGETS dnsprobe
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(radiusprobe radiusprobe.c)
+TARGET_LINK_LIBRARIES(radiusprobe radcli)
+INSTALL(TARGETS radiusprobe
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(ip-collide ip-collide.c)
+TARGET_LINK_LIBRARIES(ip-collide ubox)
+INSTALL(TARGETS ip-collide
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)

feeds/ucentral/ucentral-tools/src/dnsprobe.c

@@ -0,0 +1,690 @@
+/*
+ * nslookup_lede - musl compatible replacement for busybox nslookup
+ *
+ * Copyright (C) 2017 Jo-Philipp Wich <jo@mein.io>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+//config:config NSLOOKUP_OPENWRT
+//config:	bool "nslookup_openwrt"
+//config:	depends on !NSLOOKUP
+//config:	default y
+//config:	help
+//config:	  nslookup is a tool to query Internet name servers (LEDE flavor).
+//config:
+//config:config FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
+//config:       bool "Enable long options"
+//config:       default y
+//config:       depends on NSLOOKUP_OPENWRT && LONG_OPTS
+//config:       help
+//config:         Support long options for the nslookup applet.
+
+//applet:IF_NSLOOKUP_OPENWRT(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_NSLOOKUP_OPENWRT) += nslookup_lede.o
+
+//usage:#define nslookup_lede_trivial_usage
+//usage:       "[HOST] [SERVER]"
+//usage:#define nslookup_lede_full_usage "\n\n"
+//usage:       "Query the nameserver for the IP address of the given HOST\n"
+//usage:       "optionally using a specified DNS server"
+//usage:
+//usage:#define nslookup_lede_example_usage
+//usage:       "$ nslookup localhost\n"
+//usage:       "Server:     default\n"
+//usage:       "Address:    default\n"
+//usage:       "\n"
+//usage:       "Name:       debian\n"
+//usage:       "Address:    127.0.0.1\n"
+
+#include <stdio.h>
+#include <resolv.h>
+#include <string.h>
+#include <errno.h>
+#include <time.h>
+#include <poll.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/socket.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <netdb.h>
+
+#include <libubox/ulog.h>
+
+#define ENABLE_FEATURE_IPV6	1
+
+typedef struct len_and_sockaddr {
+	socklen_t len;
+	union {
+		struct sockaddr sa;
+		struct sockaddr_in sin;
+#if ENABLE_FEATURE_IPV6
+		struct sockaddr_in6 sin6;
+#endif
+	} u;
+} len_and_sockaddr;
+
+struct ns {
+	const char *name;
+	len_and_sockaddr addr;
+	int failures;
+	int replies;
+};
+
+struct query {
+	const char *name;
+	size_t qlen, rlen;
+	unsigned char query[512], reply[512];
+	unsigned long latency;
+	int rcode, n_ns;
+};
+
+static const char *rcodes[] = {
+	"NOERROR",
+	"FORMERR",
+	"SERVFAIL",
+	"NXDOMAIN",
+	"NOTIMP",
+	"REFUSED",
+	"YXDOMAIN",
+	"YXRRSET",
+	"NXRRSET",
+	"NOTAUTH",
+	"NOTZONE",
+	"RESERVED11",
+	"RESERVED12",
+	"RESERVED13",
+	"RESERVED14",
+	"RESERVED15",
+	"BADVERS"
+};
+
+static unsigned int default_port = 53;
+static unsigned int default_retry = 1;
+static unsigned int default_timeout = 2;
+
+
+static int parse_reply(const unsigned char *msg, size_t len, int *bb_style_counter)
+{
+	ns_msg handle;
+	ns_rr rr;
+	int i, n, rdlen;
+	const char *format = NULL;
+	char astr[INET6_ADDRSTRLEN], dname[MAXDNAME];
+	const unsigned char *cp;
+
+	if (ns_initparse(msg, len, &handle) != 0) {
+		//fprintf(stderr, "Unable to parse reply: %s\n", strerror(errno));
+		return -1;
+	}
+
+	for (i = 0; i < ns_msg_count(handle, ns_s_an); i++) {
+		if (ns_parserr(&handle, ns_s_an, i, &rr) != 0) {
+			//fprintf(stderr, "Unable to parse resource record: %s\n", strerror(errno));
+			return -1;
+		}
+
+		rdlen = ns_rr_rdlen(rr);
+
+		switch (ns_rr_type(rr))
+		{
+		case ns_t_a:
+			if (rdlen != 4) {
+				//fprintf(stderr, "Unexpected A record length\n");
+				return -1;
+			}
+			inet_ntop(AF_INET, ns_rr_rdata(rr), astr, sizeof(astr));
+			printf("Name:\t%s\nAddress: %s\n", ns_rr_name(rr), astr);
+			break;
+
+#if ENABLE_FEATURE_IPV6
+		case ns_t_aaaa:
+			if (rdlen != 16) {
+				//fprintf(stderr, "Unexpected AAAA record length\n");
+				return -1;
+			}
+			inet_ntop(AF_INET6, ns_rr_rdata(rr), astr, sizeof(astr));
+			printf("%s\thas AAAA address %s\n", ns_rr_name(rr), astr);
+			break;
+#endif
+
+		case ns_t_ns:
+			if (!format)
+				format = "%s\tnameserver = %s\n";
+			/* fall through */
+
+		case ns_t_cname:
+			if (!format)
+				format = "%s\tcanonical name = %s\n";
+			/* fall through */
+
+		case ns_t_ptr:
+			if (!format)
+				format = "%s\tname = %s\n";
+			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+				ns_rr_rdata(rr), dname, sizeof(dname)) < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+			printf(format, ns_rr_name(rr), dname);
+			break;
+
+		case ns_t_mx:
+			if (rdlen < 2) {
+				fprintf(stderr, "MX record too short\n");
+				return -1;
+			}
+			n = ns_get16(ns_rr_rdata(rr));
+			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+				ns_rr_rdata(rr) + 2, dname, sizeof(dname)) < 0) {
+				//fprintf(stderr, "Cannot uncompress MX domain: %s\n", strerror(errno));
+				return -1;
+			}
+			printf("%s\tmail exchanger = %d %s\n", ns_rr_name(rr), n, dname);
+			break;
+
+		case ns_t_txt:
+			if (rdlen < 1) {
+				//fprintf(stderr, "TXT record too short\n");
+				return -1;
+			}
+			n = *(unsigned char *)ns_rr_rdata(rr);
+			if (n > 0) {
+				memset(dname, 0, sizeof(dname));
+				memcpy(dname, ns_rr_rdata(rr) + 1, n);
+				printf("%s\ttext = \"%s\"\n", ns_rr_name(rr), dname);
+			}
+			break;
+
+		case ns_t_soa:
+			if (rdlen < 20) {
+				//fprintf(stderr, "SOA record too short\n");
+				return -1;
+			}
+
+			printf("%s\n", ns_rr_name(rr));
+
+			cp = ns_rr_rdata(rr);
+			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+			                       cp, dname, sizeof(dname));
+
+			if (n < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+
+			printf("\torigin = %s\n", dname);
+			cp += n;
+
+			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+			                       cp, dname, sizeof(dname));
+
+			if (n < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+
+			printf("\tmail addr = %s\n", dname);
+			cp += n;
+
+			printf("\tserial = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\trefresh = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\tretry = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\texpire = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\tminimum = %lu\n", ns_get32(cp));
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	return i;
+}
+
+static int parse_nsaddr(const char *addrstr, len_and_sockaddr *lsa)
+{
+	char *eptr, *hash, ifname[IFNAMSIZ];
+	unsigned int port = default_port;
+	unsigned int scope = 0;
+
+	hash = strchr(addrstr, '#');
+
+	if (hash) {
+		*hash++ = '\0';
+		port = strtoul(hash, &eptr, 10);
+
+		if (eptr == hash || *eptr != '\0' || port > 65535) {
+			errno = EINVAL;
+			return -1;
+		}
+	}
+
+	hash = strchr(addrstr, '%');
+
+	if (hash) {
+		for (eptr = ++hash; *eptr != '\0' && *eptr != '#'; eptr++) {
+			if ((eptr - hash) >= IFNAMSIZ) {
+				errno = ENODEV;
+				return -1;
+			}
+
+			ifname[eptr - hash] = *eptr;
+		}
+
+		ifname[eptr - hash] = '\0';
+		scope = if_nametoindex(ifname);
+
+		if (scope == 0) {
+			errno = ENODEV;
+			return -1;
+		}
+	}
+
+#if ENABLE_FEATURE_IPV6
+	if (inet_pton(AF_INET6, addrstr, &lsa->u.sin6.sin6_addr)) {
+		lsa->u.sin6.sin6_family = AF_INET6;
+		lsa->u.sin6.sin6_port = htons(port);
+		lsa->u.sin6.sin6_scope_id = scope;
+		lsa->len = sizeof(lsa->u.sin6);
+		return 0;
+	}
+#endif
+
+	if (!scope && inet_pton(AF_INET, addrstr, &lsa->u.sin.sin_addr)) {
+		lsa->u.sin.sin_family = AF_INET;
+		lsa->u.sin.sin_port = htons(port);
+		lsa->len = sizeof(lsa->u.sin);
+		return 0;
+	}
+
+	errno = EINVAL;
+	return -1;
+}
+
+static unsigned long mtime(void)
+{
+	struct timespec ts;
+	clock_gettime(CLOCK_REALTIME, &ts);
+	return (unsigned long)ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
+}
+
+#if ENABLE_FEATURE_IPV6
+static void to_v4_mapped(len_and_sockaddr *a)
+{
+	if (a->u.sa.sa_family != AF_INET)
+		return;
+
+	memcpy(a->u.sin6.sin6_addr.s6_addr + 12,
+	       &a->u.sin.sin_addr, 4);
+
+	memcpy(a->u.sin6.sin6_addr.s6_addr,
+	       "\0\0\0\0\0\0\0\0\0\0\xff\xff", 12);
+
+	a->u.sin6.sin6_family = AF_INET6;
+	a->u.sin6.sin6_flowinfo = 0;
+	a->u.sin6.sin6_scope_id = 0;
+	a->len = sizeof(a->u.sin6);
+}
+#endif
+
+
+/*
+ * Function logic borrowed & modified from musl libc, res_msend.c
+ */
+
+static int send_queries(struct ns *ns, int n_ns, struct query *queries, int n_queries)
+{
+	int fd;
+	int timeout = default_timeout * 1000, retry_interval, servfail_retry = 0;
+	len_and_sockaddr from = { };
+#if ENABLE_FEATURE_IPV6
+	int one = 1;
+#endif
+	int recvlen = 0;
+	int n_replies = 0;
+	struct pollfd pfd;
+	unsigned long t0, t1, t2;
+	int nn, qn, next_query = 0;
+
+	from.u.sa.sa_family = AF_INET;
+	from.len = sizeof(from.u.sin);
+
+#if ENABLE_FEATURE_IPV6
+	for (nn = 0; nn < n_ns; nn++) {
+		if (ns[nn].addr.u.sa.sa_family == AF_INET6) {
+			from.u.sa.sa_family = AF_INET6;
+			from.len = sizeof(from.u.sin6);
+			break;
+		}
+	}
+#endif
+
+	/* Get local address and open/bind a socket */
+	fd = socket(from.u.sa.sa_family, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
+
+#if ENABLE_FEATURE_IPV6
+	/* Handle case where system lacks IPv6 support */
+	if (fd < 0 && from.u.sa.sa_family == AF_INET6 && errno == EAFNOSUPPORT) {
+		fd = socket(AF_INET, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
+		from.u.sa.sa_family = AF_INET;
+	}
+#endif
+
+	if (fd < 0)
+		return -1;
+
+	if (bind(fd, &from.u.sa, from.len) < 0) {
+		close(fd);
+		return -1;
+	}
+
+#if ENABLE_FEATURE_IPV6
+	/* Convert any IPv4 addresses in a mixed environment to v4-mapped */
+	if (from.u.sa.sa_family == AF_INET6) {
+		setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one));
+
+		for (nn = 0; nn < n_ns; nn++)
+			to_v4_mapped(&ns[nn].addr);
+	}
+#endif
+
+	pfd.fd = fd;
+	pfd.events = POLLIN;
+	retry_interval = timeout / default_retry;
+	t0 = t2 = mtime();
+	t1 = t2 - retry_interval;
+
+	for (; t2 - t0 < timeout; t2 = mtime()) {
+		if (t2 - t1 >= retry_interval) {
+			for (qn = 0; qn < n_queries; qn++) {
+				if (queries[qn].rlen)
+					continue;
+
+				for (nn = 0; nn < n_ns; nn++) {
+					sendto(fd, queries[qn].query, queries[qn].qlen,
+					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
+				}
+			}
+
+			t1 = t2;
+			servfail_retry = 2 * n_queries;
+		}
+
+		/* Wait for a response, or until time to retry */
+		if (poll(&pfd, 1, t1+retry_interval-t2) <= 0)
+			continue;
+
+		while (1) {
+			recvlen = recvfrom(fd, queries[next_query].reply,
+			                   sizeof(queries[next_query].reply), 0,
+			                   &from.u.sa, &from.len);
+
+			/* read error */
+			if (recvlen < 0)
+				break;
+
+			/* Ignore non-identifiable packets */
+			if (recvlen < 4)
+				continue;
+
+			/* Ignore replies from addresses we didn't send to */
+			for (nn = 0; nn < n_ns; nn++)
+				if (memcmp(&from.u.sa, &ns[nn].addr.u.sa, from.len) == 0)
+					break;
+
+			if (nn >= n_ns)
+				continue;
+
+			/* Find which query this answer goes with, if any */
+			for (qn = next_query; qn < n_queries; qn++)
+				if (!memcmp(queries[next_query].reply, queries[qn].query, 2))
+					break;
+
+			if (qn >= n_queries || queries[qn].rlen)
+				continue;
+
+			queries[qn].rcode = queries[next_query].reply[3] & 15;
+			queries[qn].latency = mtime() - t0;
+			queries[qn].n_ns = nn;
+
+			ns[nn].replies++;
+
+			/* Only accept positive or negative responses;
+			 * retry immediately on server failure, and ignore
+			 * all other codes such as refusal. */
+			switch (queries[qn].rcode) {
+			case 0:
+			case 3:
+				break;
+
+			case 2:
+				if (servfail_retry && servfail_retry--) {
+					ns[nn].failures++;
+					sendto(fd, queries[qn].query, queries[qn].qlen,
+					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
+				}
+				/* fall through */
+
+			default:
+				continue;
+			}
+
+			/* Store answer */
+			n_replies++;
+
+			queries[qn].rlen = recvlen;
+
+			if (qn == next_query) {
+				while (next_query < n_queries) {
+					if (!queries[next_query].rlen)
+						break;
+
+					next_query++;
+				}
+			}
+			else {
+				memcpy(queries[qn].reply, queries[next_query].reply, recvlen);
+			}
+
+			if (next_query >= n_queries)
+				return n_replies;
+		}
+	}
+
+	return n_replies;
+}
+
+static struct ns *add_ns(struct ns **ns, int *n_ns, const char *addr)
+{
+	char portstr[sizeof("65535")], *p;
+	len_and_sockaddr a = { };
+	struct ns *tmp;
+	struct addrinfo *ai, *aip, hints = {
+		.ai_flags = AI_NUMERICSERV,
+		.ai_socktype = SOCK_DGRAM
+	};
+
+	if (parse_nsaddr(addr, &a)) {
+		/* Maybe we got a domain name, attempt to resolve it using the standard
+		 * resolver routines */
+
+		p = strchr(addr, '#');
+		snprintf(portstr, sizeof(portstr), "%hu",
+		         (unsigned short)(p ? strtoul(p, NULL, 10) : default_port));
+
+		if (!getaddrinfo(addr, portstr, &hints, &ai)) {
+			for (aip = ai; aip; aip = aip->ai_next) {
+				if (aip->ai_addr->sa_family != AF_INET &&
+				    aip->ai_addr->sa_family != AF_INET6)
+					continue;
+
+#if ! ENABLE_FEATURE_IPV6
+				if (aip->ai_addr->sa_family != AF_INET)
+					continue;
+#endif
+
+				tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
+
+				if (!tmp)
+					return NULL;
+
+				*ns = tmp;
+
+				(*ns)[*n_ns].name = addr;
+				(*ns)[*n_ns].replies = 0;
+				(*ns)[*n_ns].failures = 0;
+				(*ns)[*n_ns].addr.len = aip->ai_addrlen;
+
+				memcpy(&(*ns)[*n_ns].addr.u.sa, aip->ai_addr, aip->ai_addrlen);
+
+				(*n_ns)++;
+			}
+
+			freeaddrinfo(ai);
+
+			return &(*ns)[*n_ns];
+		}
+
+		return NULL;
+	}
+
+	tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
+
+	if (!tmp)
+		return NULL;
+
+	*ns = tmp;
+
+	(*ns)[*n_ns].addr = a;
+	(*ns)[*n_ns].name = addr;
+	(*ns)[*n_ns].replies = 0;
+	(*ns)[*n_ns].failures = 0;
+
+	return &(*ns)[(*n_ns)++];
+}
+
+static struct query *add_query(struct query **queries, int *n_queries,
+                               int type, const char *dname)
+{
+	struct query *tmp;
+	ssize_t qlen;
+
+	tmp = realloc(*queries, sizeof(**queries) * (*n_queries + 1));
+
+	if (!tmp)
+		return NULL;
+
+	memset(&tmp[*n_queries], 0, sizeof(*tmp));
+
+	qlen = res_mkquery(QUERY, dname, C_IN, type, NULL, 0, NULL,
+	                   tmp[*n_queries].query, sizeof(tmp[*n_queries].query));
+
+	tmp[*n_queries].qlen = qlen;
+	tmp[*n_queries].name = dname;
+	*queries = tmp;
+
+	return &tmp[(*n_queries)++];
+}
+
+int main(int argc, char **argv)
+{
+	int rc = 1;
+	struct ns *ns = NULL;
+	struct query *queries = NULL;
+	int n_ns = 0, n_queries = 0;
+	int c = 0;
+
+	char *url = "telecominfraproject.com";
+	char *server = "127.0.0.1";
+	int v6 = 0;
+
+	while (1) {
+		int option = getopt(argc, argv, "u:s:i:6");
+
+		if (option == -1)
+			break;
+
+		switch (option) {
+		case '6':
+			v6 = 1;
+			break;
+		case 'u':
+			url = optarg;
+			break;
+		case 's':
+			server = optarg;
+			break;
+		default:
+		case 'h':
+			printf("Usage: dnsprobe OPTIONS\n"
+			       "  -6 - use ipv6\n"
+			       "  -u <url>\n"
+			       "  -s <server>\n");
+			return -1;
+		}
+	}
+
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "dnsprobe");
+
+	ULOG_INFO("attempting to probe dns - %s %s %s\n",
+		url, server, v6 ? "ipv6" : "");
+
+
+	add_query(&queries, &n_queries, v6 ? T_AAAA : T_A, url);
+
+	add_ns(&ns, &n_ns, server);
+
+	rc = send_queries(&ns[0], 1, queries, n_queries);
+	if (rc <= 0) {
+		fprintf(stderr, "Failed to send queries: %s\n", strerror(errno));
+		rc = -1;
+		goto out;
+	}
+
+	if (queries[0].rcode != 0) {
+		printf("** server can't find %s: %s\n", queries[0].name,
+		rcodes[queries[0].rcode]);
+		goto out;
+	}
+
+	if (queries[0].rlen) {
+		c = parse_reply(queries[0].reply, queries[0].rlen, NULL);
+	}
+
+	if (c == 0)
+		printf("*** Can't find %s: No answer\n", queries[0].name);
+	else if (c < 0)
+		printf("*** Can't find %s: Parse error\n", queries[0].name);
+	else
+		rc = 0;
+
+out:
+	if (n_ns)
+		free(ns);
+
+	if (n_queries)
+		free(queries);
+
+	return rc;
+}

feeds/ucentral/ucentral-tools/src/firstcontact.c

@@ -0,0 +1,100 @@
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <getopt.h>
+
+#include <curl/curl.h>
+
+#include <libubox/ulog.h>
+
+static const char *file_cert = "/etc/open-wifi/client.pem";
+static const char *file_key  = "/etc/open-wifi/client_dec.key";
+static const char *file_json = "/etc/open-wifi/redirector.json";
+static const char *file_dbg  = "/tmp/firstcontact.hdr";
+
+int main(int argc, char **argv)
+{
+	FILE *fp_json;
+	FILE *fp_dbg;
+	CURLcode res;
+	CURL *curl;
+	char *devid = NULL;
+	char *url;
+
+	while (1) {
+		int option = getopt(argc, argv, "k:c:o:hi:");
+
+		if (option == -1)
+			break;
+
+		switch (option) {
+		case 'k':
+			file_key = optarg;
+			break;
+		case 'c':
+			file_cert = optarg;
+			break;
+		case 'o':
+			file_json = optarg;
+			break;
+		case 'i':
+			devid = optarg;
+			break;
+		default:
+		case 'h':
+			printf("Usage: firstcontact OPTIONS\n"
+			       "  -k <keyfile>\n"
+			       "  -c <certfile>\n"
+			       "  -o <outfile>\n"
+			       "  -i <devid>\n");
+			return -1;
+		}
+	}
+
+	if (!devid) {
+		fprintf(stderr, "missing devid\n");
+		return -1;
+	}
+
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "firstcontact");
+	ULOG_INFO("attempting first contact\n");
+
+	fp_dbg = fopen(file_dbg, "wb");
+	fp_json = fopen(file_json, "wb");
+	if (!fp_json) {
+		ULOG_ERR("failed to create %s\n", file_json);
+		return -1;
+	}
+
+	curl_global_init(CURL_GLOBAL_DEFAULT);
+	curl = curl_easy_init();
+	if (!curl) {
+		ULOG_ERR("curl_easy_init failed\n");
+		return -1;
+	}
+
+	if (asprintf(&url, "https://clientauth.demo.one.digicert.com/iot/api/v2/device/%s", devid) < 0) {
+		ULOG_ERR("failed to assemble url\n");
+		return -1;
+	}
+
+	curl_easy_setopt(curl, CURLOPT_URL, url);
+	curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp_json);
+	curl_easy_setopt(curl, CURLOPT_HEADERDATA, fp_dbg);
+	curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLCERT, file_cert);
+	curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLKEY, file_key);
+	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
+
+	res = curl_easy_perform(curl);
+	if (res != CURLE_OK)
+		ULOG_ERR("curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
+	else
+		ULOG_INFO("downloaded first contact data\n");
+	curl_easy_cleanup(curl);
+	curl_global_cleanup();
+
+	ulog_close();
+
+	return (res != CURLE_OK);
+}

feeds/ucentral/ucentral-tools/src/ip-collide.c

@@ -0,0 +1,86 @@
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include <libubox/list.h>
+#include <libubox/ulog.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+struct route {
+	struct list_head list;
+	char devname[64];
+	uint32_t domain;
+	uint32_t mask;
+};
+
+static struct list_head routes = LIST_HEAD_INIT(routes);
+
+static int parse_routes(void)
+{
+	FILE *fp = fopen("/proc/net/route", "r");
+	int flgs, ref, use, metric, mtu, win, ir;
+	struct route *route;
+	unsigned long g;
+	int r;
+
+	r = fscanf(fp, "%*[^\n]\n");
+	if (r < 0) {
+		fprintf(stderr, "failed to parse routes\n");
+		return -1;
+	}
+	while (1) {
+		route = malloc(sizeof(*route));
+		if (!route)
+			break;
+		memset(route, 0, sizeof(*route));
+		r = fscanf(fp, "%63s%x%lx%X%d%d%d%x%d%d%d\n",
+			route->devname, &route->domain, &g, &flgs, &ref, &use, &metric, &route->mask,
+			&mtu, &win, &ir);
+		if (r != 11 && (r < 0) && feof(fp))
+			break;
+		list_add(&route->list, &routes);
+		printf("1 %s %x %x\n", route->devname, ntohl(route->domain), ntohl(route->mask));
+	}
+
+	fclose(fp);
+
+	return 0;
+}
+
+static int find_collisions(void)
+{
+	struct route *route;
+
+	list_for_each_entry(route, &routes, list) {
+		struct route *compare;
+
+		if (!route->domain || !route->mask)
+			continue;
+		list_for_each_entry(compare, &routes, list) {
+			if (!compare->domain || !compare->mask)
+				continue;
+			if (compare == route)
+				continue;
+			if (((route->domain & route->mask) == (compare->domain & route->mask)) ||
+			    ((route->domain & compare->mask) == (compare->domain & compare->mask))) {
+				ULOG_ERR("collision detected\n");
+				return 1;
+			}
+		}
+	}
+	ULOG_INFO("no collision detected\n");
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "ip-collide");
+
+	parse_routes();
+	if (!list_empty(&routes))
+		return find_collisions();
+
+	return 0;
+}

feeds/ucentral/ucentral-tools/src/radiusprobe.c

@@ -0,0 +1,47 @@
+#include <stdio.h>
+#include <string.h>
+#include <radcli/radcli.h>
+
+int
+main(int argc, char **argv)
+{
+	int result;
+	char username[128];
+	char passwd[AUTH_PASS_LEN + 1];
+	VALUE_PAIR *send, *received;
+	uint32_t service;
+	rc_handle *rh;
+
+	/* Not needed if you already used openlog() */
+	rc_openlog("radiusprobe");
+
+	if ((rh = rc_read_config("/tmp/radius.conf")) == NULL)
+		return ERROR_RC;
+
+	strcpy(username, "healthcheck");
+	strcpy(passwd, "uCentral");
+
+	send = NULL;
+
+	if (rc_avpair_add(rh, &send, PW_USER_NAME, username, -1, 0) == NULL)
+		return ERROR_RC;
+
+	if (rc_avpair_add(rh, &send, PW_USER_PASSWORD, passwd, -1, 0) == NULL)
+		return ERROR_RC;
+
+	service = PW_AUTHENTICATE_ONLY;
+	if (rc_avpair_add(rh, &send, PW_SERVICE_TYPE, &service, -1, 0) == NULL)
+		return ERROR_RC;
+
+	result = rc_auth(rh, 0, send, &received, NULL);
+
+	if (result == OK_RC || result == REJECT_RC) {
+		fprintf(stderr, "RADIUS server OK\n");
+		result = 0;
+	} else {
+		fprintf(stderr, "RADIUS server failure\n");
+		result = -1;
+	}
+
+	return result;
+}

feeds/ucentral/udhcpinject/files/etc/config/dhcpinject

@@ -5,3 +5,6 @@
 #   list ssid 'EAP101-ERICHI'
 #   list ssid 'EAP101-AKIHO'
 #   list ssid 'EAP101-DAMAYU'
+#
+# config dhcpinject 'dhcpinject'
+#   option iface_count '6'

feeds/ucentral/udhcpinject/files/etc/init.d/dhcpinject

@@ -9,9 +9,9 @@ SERVICE_NAME="dhcpinject"
 PROG=/usr/bin/udhcpinject
 
 start_service() {
-    local ssid_list=""
     local ssids=""
     local ports=""
+    local ifaces=""
 
     # Function to process each ssid
     append_ssid() {
@@ -40,6 +40,9 @@ start_service() {
 
     # Get the list of ports
     config_list_foreach uplink port append_port
+
+    # Get the iface_count
+    config_get ifaces dhcpinject iface_count
     
     # Fallback to eth0 if no ports are specified
     if [ -z "$ports" ]; then
@@ -47,11 +50,11 @@ start_service() {
     fi
 
     # Optional: Log or echo for debugging
-    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports"
+    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports, IFACEs=$ifaces"
 
     procd_open_instance "$SERVICE_NAME"
     procd_set_param command $PROG
-    procd_set_param env SSIDs="$ssids" PORTs="$ports"
+    procd_set_param env SSIDs="$ssids" PORTs="$ports" IFACEs="$ifaces"
     procd_set_param respawn 3600 10 10
     procd_set_param file /etc/config/dhcpinject
     procd_set_param reload_signal SIGHUP

feeds/ucentral/udhcpinject/src/udhcpinject.c

@@ -26,6 +26,7 @@ struct iface_info *iface_map = NULL;
 static struct port_info *ports = NULL;
 int iface_count = 0;
 int port_count = 0;
+int total_iface = 0;
 static pcap_t *handle = NULL;
 static char *provided_ssids = NULL;
 static char *provided_ports = NULL;
@@ -192,6 +193,11 @@ int parse_ssids(const char *ssids) {
         return -1;
     }
 
+    if (iface_count != total_iface) {
+        syslog(LOG_ERR, "Expect %d but only %d interfaces were found.\n", total_iface, iface_count);
+        return -1;
+    }
+
     syslog(LOG_INFO, "Found %d matching interfaces\n", iface_count);
     return 0;
 }
@@ -310,7 +316,6 @@ void signal_handler(int sig) {
         exit(0);
     } else if (sig == SIGHUP) {
         syslog(LOG_INFO, "Received reload signal, reconfiguring...\n");
-        sleep(5);
         // Clean up existing resources
         cleanup_tc();
         
@@ -561,7 +566,19 @@ int main(int argc, char *argv[]) {
     signal(SIGTERM, signal_handler);
     signal(SIGHUP, signal_handler);
 
-    sleep(5);
+    // Read IFACEs from environment variable
+    char *iface_env = getenv("IFACEs");
+    if (!iface_env) {
+        syslog(LOG_ERR, "No IFACEs provided. Exiting...\n");
+        cleanup();
+        return 1;
+    }
+    total_iface = atoi(iface_env);
+    if (total_iface <= 0) {
+        syslog(LOG_ERR, "Invalid IFACEs value: %s. Exiting...\n", iface_env);
+        cleanup();
+        return 1;
+    }
 
     provided_ssids = getenv("SSIDs");
     syslog(LOG_INFO, "Provided SSIDs: %s\n", provided_ssids);
@@ -618,4 +635,4 @@ int main(int argc, char *argv[]) {
 
     cleanup();
     return 0;
-}
+}