ucentral-schema: update to latest HEAD

125a148 add PoE support for client ports
17b6c18 Cloud Package Manager
a86b8b0 Fix typo in enhanced MPSK property name
57852ed update schema.json to 4.1.0
e155483 command: update upgrade and factory commands to handle new operational certs

Signed-off-by: John Crispin <john@phrozen.org>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be' ]
+        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/hostapd/hostapd/files/hostapd.sh

@@ -117,8 +117,6 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -162,7 +160,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		rts_threshold beacon_rate maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -261,8 +259,6 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
-	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -471,6 +467,9 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
+
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -724,7 +723,8 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp
+		vendor_elements fils uci_section dynamic_probe_resp \
+		rssi_reject_assoc_rssi rssi_ignore_probe_request 
 
 	set_default fils 0
 	set_default isolate 0
@@ -778,6 +778,8 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/hostapd/hostapd/patches/zzz-ignore-probe-event.patch

@@ -0,0 +1,14 @@
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
+ 	int ubus_response;
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+-	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
++	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
++		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
+ 		return;
++	}
+ 
+ 	if (len < IEEE80211_HDRLEN)
+ 		return;

feeds/hostapd/hostapd/src/src/ap/ubus.c

@@ -1944,6 +1944,21 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
+{
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	if (!addr)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", addr);
+	blobmsg_add_u32(&b, "rssi", rssi);
+
+	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
+}
+
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/hostapd/hostapd/src/src/ap/ubus.h

@@ -56,6 +56,7 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -41,6 +41,8 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
+	emplus-wap385c \
+	emplus-wap386v2 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -404,6 +406,8 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))

feeds/ipq807x_v5.4/cooling/files/cooling.init

@@ -18,9 +18,11 @@ start() {
 	[ "$enabled" -gt 0 ] || return 1
 
 	case "$board" in
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g)
-        service_start /usr/sbin/cooling
+		sonicfi,rap630c-311g)
+		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630c-311g-cooling.conf
+		;;
+		sonicfi,rap630w-311g)
+		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630w-311g-cooling.conf
 		;;
 	esac
 

feeds/ipq807x_v5.4/cooling/src/cooling.c

@@ -28,143 +28,270 @@
 
 #define CUR_STATE_PATH "/sys/devices/virtual/thermal/cooling_device%i/cur_state"
 #define TEMPER_PATH "/sys/devices/virtual/thermal/thermal_zone%i/temp"
+#define CPU_FREQ_PATH "/sys/devices/system/cpu/cpu0/cpufreq/%s"
 
 #define PATH_MAX 256
-#define BUF_MAX 8
-#define THERSHOLD_MAX 20
+#define BUF_MAX 32
 #define PHY0 0
 #define PHY1 1
+#define NUM_VALUES 4
+
+int load_config_file=0;
+
+//#define ULOG_INFO(fmt, ...) ulog(LOG_INFO, fmt, ## __VA_ARGS__)
 
 typedef unsigned char	u8;
+typedef unsigned long	u32;
 
 u8 w2g_threshold_level=0;
 u8 w5g_threshold_level=0;
 u8 w2g_cur_temper=0;
 u8 w5g_cur_temper=0;
+u32 level_cpu_freq=1008000;
 
-
+/* default value of wifi thresholds*/
 #ifdef PLATFORM_RAP630C_311G
-u8 level_2g_lo[4]={0, 105, 110, 115};
-u8 level_2g_hi[4]={105, 110, 115, 120};
-u8 level_2g_limit[4]={0, 35, 50, 70};
-u8 level_5g_lo[4]={0, 105, 110, 115};
-u8 level_5g_hi[4]={105, 110, 115, 120};
-u8 level_5g_limit[4]={0, 20, 30, 50};
+u8 level_2g_high[4]={105, 110, 115, 120};
+u8 level_2g_low[4]={0, 105, 110, 115};
+u8 level_2g_mitigation[4]={0, 35, 50, 70};
+u8 level_5g_high[4]={105, 110, 115, 120};
+u8 level_5g_low[4]={0, 105, 110, 115};
+u8 level_5g_mitigation[4]={0, 20, 30, 50};
+u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
 #endif
 
 #ifdef PLATFORM_RAP630W_311G
-u8 level_2g_lo[4]={0, 105, 110, 115};
-u8 level_2g_hi[4]={105, 110, 115, 120};
-u8 level_2g_limit[4]={0, 20, 50, 70};
-u8 level_5g_lo[4]={0, 105, 110, 115};
-u8 level_5g_hi[4]={105, 110, 115, 120};
-u8 level_5g_limit[4]={0, 20, 50, 70};
+u8 level_2g_high[4]={105, 110, 115, 120};
+u8 level_2g_low[4]={0, 105, 110, 115};
+u8 level_2g_mitigation[4]={0, 20, 50, 70};
+u8 level_5g_high[4]={105, 110, 115, 120};
+u8 level_5g_low[4]={0, 105, 110, 115};
+u8 level_5g_mitigation[4]={0, 20, 50, 70};
+u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
 #endif
 
 static char *config_file = NULL;
-char temp[4][BUF_MAX];
 
-#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
+typedef struct {
+    int thresholds_high[NUM_VALUES];
+    int thresholds_low[NUM_VALUES];
+    int mitigation[NUM_VALUES];
+    int cpu_freq[NUM_VALUES];
+} WifiConfig;
 
-static void write_cur_state (char *filename, int state) {
+WifiConfig wifi2g = {0}, wifi5g = {0};
+
+static void set_cpu_freq (int freq) {
+	FILE * fp;
+	char filename[PATH_MAX];
+
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_governor");
+
+	fp = fopen(filename, "w");
+	if (!fp) {
+		ULOG_ERR("open scaling_governor error\n");
+	}
+	fprintf(fp, "%s", "userspace");
+	fclose(fp);
+
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_setspeed");
+
+	fp = fopen(filename, "w");
+	if (!fp) {
+		ULOG_ERR("open scaling_setspeed error\n");
+	}
+	fprintf(fp, "%d", freq);
+	fclose(fp);
+}
+
+void parse_line(const char* line, const char* key, int* array) {
+	char label[64];
+	int values[NUM_VALUES];
+	int i;
+
+	if (sscanf(line, "%s %d %d %d %d %d", label, &values[0], &values[1], &values[2], &values[3], &values[4]) == 5) {
+		for (i = 0; i < NUM_VALUES; ++i) {
+			array[i] = values[i];
+		}
+	}
+}
+
+int load_config() {
+	FILE * fp = fopen(config_file, "r");
+	if (!fp) {
+		ULOG_ERR("open config file error\n");
+		return 1;
+	}
+
+	WifiConfig* current_config = NULL;
+	char line[256];
+
+	while (fgets(line, sizeof(line), fp)) {
+		if (strstr(line, "[wifi2g]")) {
+			current_config = &wifi2g;
+		} else if (strstr(line, "[wifi5g]")) {
+			current_config = &wifi5g;
+		} else if (current_config) {
+			if (strstr(line, "thresholds_high")) {
+				parse_line(line, "thresholds_high", current_config->thresholds_high);
+			} else if (strstr(line, "thresholds_low")) {
+				parse_line(line, "thresholds_low", current_config->thresholds_low);
+			} else if (strstr(line, "mitigation")) {
+				parse_line(line, "mitigation", current_config->mitigation);
+			} else if (strstr(line, "CPU_freq")) {
+				parse_line(line, "CPU_freq", current_config->cpu_freq);
+			}
+		}
+	}
+
+	fclose(fp);
+	set_cpu_freq(wifi5g.cpu_freq[0]);
+
+	return 0;
+}
+
+int load_default_config(){
+	int i=0;
+
+	set_cpu_freq(1008000);
+	for (i = 0; i < NUM_VALUES; i++) {
+		wifi2g.thresholds_high[i]=level_2g_high[i];
+		wifi2g.thresholds_low[i]=level_2g_low[i];
+		wifi2g.mitigation[i]=level_2g_mitigation[i];
+		wifi2g.cpu_freq[i]=level_cpu_frequency[i];
+		wifi5g.thresholds_high[i]=level_5g_high[i];
+		wifi5g.thresholds_low[i]=level_5g_low[i];
+		wifi5g.mitigation[i]=level_5g_mitigation[i];
+		wifi5g.cpu_freq[i]=level_cpu_frequency[i];
+	}
+	return 0;
+
+}
+
+static void write_cur_state (const char *filename, int state) {
 	FILE * fp;
 
-	ULOG_DBG("write_cur_state filename=[%s] [%d]\n", filename, state);
 	fp = fopen(filename, "w");
 	if (!fp){
-		ULOG_ERR("some kind of error write cur_state\n");
+		ULOG_ERR("open %s file error\n",filename);
 	}
 	fprintf(fp, "%d", state);
 	fclose(fp);
 }
 
-static void read_cur_state (char *filename, char *buffer) {
-	FILE * fp;
-
+int read_cur_state(const char *filename, char *buf, size_t buffer) {
+	FILE *fp;
+	
 	fp = fopen(filename, "r");
-	if (!fp){
-		ULOG_ERR("some kind of error write cur_state\n");
+	if (!fp) {
+		ULOG_ERR("open %s file error\n",filename);
+		return -1;
 	}
-	if (0 == fread(buffer, sizeof(char), 3, fp)) {
-		ULOG_ERR("some kind of error read value\n");
+	if (!fgets(buf, buffer, fp)) {
+		ULOG_ERR("Failed to read %s file\n", filename);
+		fclose(fp);
+		return -1;
 	}
 	fclose(fp);
+	return 0;
 }
 
+
 static void wifi_get_temperature() {
 	char filename[PATH_MAX];
-	FILE * fp;
-	int i = 0;
 	char buffer[BUF_MAX];
+	int i = 0;
+
+//	ULOG_INFO("=================================\n");
+
+	/* read cpuinfo_cur_freq*/
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "cpuinfo_cur_freq");
+
+	memset(buffer, 0, BUF_MAX);
+	read_cur_state(filename, buffer, sizeof(buffer));
+//	ULOG_INFO("CPU current frequency: %s\n", buffer);
 
 	/* get current phy cooling state*/
-	for (i=0 ; i <= 1; i++ ) {
+	for (i=0; i <= 1; i++) {
 		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
-		read_cur_state(filename, buffer);
-		ULOG_DBG("read from Phy%i cur_state is %s\n", i, buffer);
+		read_cur_state(filename, buffer, sizeof(buffer));
+//		ULOG_INFO("Phy%i cur_state is: %s\n", i, buffer);
 	}
 
-	for (i=0 ; i <= 3; i++ ) {
+	for (i=0; i <= 3; i++) {
+		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, TEMPER_PATH, i);
-		fp = fopen(filename, "r");
-		if (!fp) {
-			ULOG_ERR("some kind of error open value\n");
-		}
-		memset(temp[i], 0, BUF_MAX);
-		if (0 == fread(temp[i], sizeof(char), 3, fp)) {
-			ULOG_ERR("some kind of error read value\n");
-		}
-		fclose(fp);
-		ULOG_DBG("thermal_zone%i cur_temp is %s\n", i, temp[i]);
+		read_cur_state(filename, buffer, sizeof(buffer));
+//		ULOG_INFO("thermal_zone%i cur_temp is: %s\n", i, buffer);
+
+		if (i == 0)
+			w2g_cur_temper=atoi(buffer);
+		else if (i == 3)
+			w5g_cur_temper=atoi(buffer);
 	}
 
-	w2g_cur_temper=atoi(temp[0]);
-	w5g_cur_temper=atoi(temp[3]);
+	if (w5g_cur_temper >= 120)
+	{
+		ULOG_ERR("!! Temperature is over %d degree, system will reboot\n", w5g_cur_temper);
+		sync();
+		if ( -1 != system("reboot &") ){
+			printf("sysyem reboot...\n");
+		}
+	}
 }
 
 static void wifi_set_cooling() {
 	char filename[PATH_MAX];
 	int level;
 
-	for (level=0 ; level<=3 ; level++) {
-		if (w2g_cur_temper >= level_2g_lo[level] && w2g_cur_temper < level_2g_hi[level]) {
-			ULOG_DBG("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
+	for (level = 0; level <= 3; level++) {
+		if (w2g_cur_temper >= wifi2g.thresholds_low[level] && w2g_cur_temper < wifi2g.thresholds_high[level]) {
+//			ULOG_INFO("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
 			if (w2g_threshold_level != level) {
-				ULOG_DBG("setting 2G reduce %d percent\n" ,level_2g_limit[level]);
+//				ULOG_INFO("setting 2G reduce %d percent\n" ,wifi2g.mitigation[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY0);
-				write_cur_state(filename, level_2g_limit[level]);
+				write_cur_state(filename, wifi2g.mitigation[level]);
 				w2g_threshold_level = level;
 			}
 		}
-		if (w5g_cur_temper >= level_5g_lo[level] && w5g_cur_temper < level_5g_hi[level]) {
-			ULOG_DBG("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
+		if (w5g_cur_temper >= wifi5g.thresholds_low[level] && w5g_cur_temper < wifi5g.thresholds_high[level]) {
+//			ULOG_INFO("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
 			if (w5g_threshold_level != level) {
-				ULOG_DBG("setting 5G reduce %d percent\n" ,level_5g_limit[level]);
+//				ULOG_INFO("setting 5G reduce %d percent\n" ,wifi5g.mitigation[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY1);
-				write_cur_state(filename, level_5g_limit[level]);
+				write_cur_state(filename, wifi5g.mitigation[level]);
 				w5g_threshold_level = level;
+				set_cpu_freq(wifi5g.cpu_freq[level]);
 			}
 		}
 	}
+
 }
 
+
 static void cooling_init() {
-	char filename[256];
-	int i;
+	char filename[PATH_MAX];
+	int i,result=0;
 
 	for (i=0 ; i <= 1; i++) {
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
 		write_cur_state(filename, 0);
 	}
+
+	if(load_config_file)
+		result = load_config();
+
+	if (result == 1 || load_config_file == 0)
+		load_default_config();
 }
 
 void print_usage(void)
 {
 	printf("\nWifi-cooling daemon usage\n");
 	printf("Optional arguments:\n");
-	printf("  -c <file>        config file\n");
-	printf("  -d               debug output\n");
+	printf("  -c <file>        setting with config file\n");
+	printf("  -d               default setting\n");
 	printf("  -h               this usage screen\n");
 }
 
@@ -185,17 +312,18 @@ int main(int argc, char *argv[])
 	setpriority(PRIO_PROCESS, getpid(), -20);
 
 	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "cooling");
-	ulog_threshold(LOG_INFO);
+	ulog_threshold(LOG_ERR);
+//	ulog_threshold(LOG_INFO);
 
-	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
+ 	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
 		switch (ch) {
 		case 'c':
 			printf("wifi-cooling load configuration file %s\n", optarg);
 			config_file = optarg;
+			load_config_file=1;
 			break;
 		case 'd':
-			printf("wifi-cooling ulog_threshold set to debug level\n");
-			ulog_threshold(LOG_DEBUG);
+			printf("wifi-cooling set to default value\n");
 			break;
 		case 'h':
 		default:
@@ -212,4 +340,4 @@ int main(int argc, char *argv[])
 	uloop_done();
 
 	return 0;
-}
+}

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630c-311g-cooling.conf

@@ -1,15 +1,11 @@
-sampling 5000
+[wifi2g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           35          50          70
+CPU_freq            1008000     800000      800000      800000
 
-[tsens_tz_sensor1]
-sampling 	5000
-thresholds 			105			110			115			119			120
-thresholds_clr 		0			100			105			110			115
-actions 			cooling		cooling	 	cooling		cooling		shutdown
-action_info 		0			35	 		50			70			800000
-
-[tsens_tz_sensor4]
-sampling 	5000
-thresholds 			105			110			115			119			120
-thresholds_clr 		0			100			105			110			115
-actions 			cooling		cooling		cooling		cooling		shutdown
-action_info 		0			20			30	 		50			800000
+[wifi5g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          30          50
+CPU_freq            1008000     800000      800000      800000

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630w-311g-cooling.conf

@@ -1,15 +1,11 @@
-sampling 5000
+[wifi2g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          50          70
+CPU_freq            1008000     800000      800000      800000
 
-[tsens_tz_sensor1]
-sampling 	5000
-thresholds 			105			115			119			125
-thresholds_clr 		0			105			110			120
-actions 			cooling		cooling	 	cooling		cooling
-action_info 		0			20	 		50			70
-
-[tsens_tz_sensor4]
-sampling 	5000
-thresholds 			105			115			119			125
-thresholds_clr 		0			105			110			120
-actions 			cooling		cooling		cooling		cooling
-action_info 		0			20			50	 		70
+[wifi5g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          50          70
+CPU_freq            1008000     800000      800000      800000

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -117,8 +117,6 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -162,7 +160,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		rts_threshold beacon_rate maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -261,8 +259,6 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
-	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -472,6 +468,9 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
+
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -725,7 +724,8 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp multi_psk
+		vendor_elements fils uci_section dynamic_probe_resp multi_psk \
+		rssi_reject_assoc_rssi rssi_ignore_probe_request
 
 	set_default fils 0
 	set_default isolate 0
@@ -780,6 +780,8 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/ipq807x_v5.4/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = config.multi_psk;
+			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
-	if (!is_ssid_mpsk(data.iface))
-		return;
-
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
+		if (!is_ssid_mpsk(data.iface))
+			return;
+
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null)
+		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/ipq807x_v5.4/hostapd/patches/zzz-ignore-probe-event.patch

@@ -0,0 +1,14 @@
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
+ 	int ubus_response;
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+-	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
++	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
++		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
+ 		return;
++	}
+ 
+ 	if (len < IEEE80211_HDRLEN)
+ 		return;

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1944,6 +1944,21 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
+{
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	if (!addr)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", addr);
+	blobmsg_add_u32(&b, "rssi", rssi);
+
+	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
+}
+
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.h

@@ -56,6 +56,7 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -40,6 +40,11 @@ edgecore,oap101e-6e)
 	ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1"
         ucidef_set_led_default "power" "POWER" "blue:management" "on"
 	;;
+emplus,wap385c)
+	ucidef_set_led_default "ledr" "LEDR" "sys:red" "on"
+	ucidef_set_led_default "ledg" "LEDG" "sys:green" "on"
+	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
+	;;
 hfcl,ion4x_w|\
 hfcl,ion4xi_w)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -48,6 +48,7 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
+	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
 		ucidef_set_interface_wan "eth0"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -129,6 +129,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
+	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	optimcloud,d60|\
@@ -157,6 +158,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
+	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -76,6 +76,7 @@ platform_check_image() {
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
+	emplus,wap385c|\
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
@@ -129,6 +130,7 @@ platform_do_upgrade() {
                 ;;
 	cig,wf186w|\
 	cig,wf186h|\
+	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	wallys,dr5018|\

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap385c.dts

@@ -0,0 +1,760 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP385C";
+	compatible = "emplus,wap385c", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet1 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 23 0>;
+
+			ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x18>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	poe_dc_pins: poe_dc_pins {
+		T2P_DET {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		12V_DET {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pinmux {
+		linux,phandle = <0x4d>;
+		phandle = <0x4d>;
+
+		led_G {
+			pins = "gpio24";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+
+		led_B {
+			pins = "gpio28";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+
+		led_R {
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@24 {
+			label = "sys:green";
+			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@28 {
+			label = "sys:blue";
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_power: led@38 {
+			label = "sys:red";
+			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap385c:sys:red";
+			default-state = "on";
+		};
+	};
+
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -154,6 +154,15 @@ define Device/edgecore_oap101e_6e
 endef
 TARGET_DEVICES += edgecore_oap101e_6e
 
+define Device/emplus_wap385c
+  DEVICE_TITLE := Emplus WAP385C
+  DEVICE_DTS := qcom-ipq5018-emplus-wap385c
+  SUPPORTED_DEVICES := emplus,wap385c
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap385c ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += emplus_wap385c
+
 define Device/hfcl_ion4x_w
   DEVICE_TITLE := HFCL ION4x_w
   DEVICE_DTS := qcom-ipq5018-hfcl-ion4x_w

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds

@@ -26,6 +26,12 @@ edgecore,eap101)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
 	;;
+emplus,wap386v2)
+	ucidef_set_led_default "power" "POWER" "red:power" "on"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
+	;;
 hfcl,ion4xi|\
 hfcl,ion4x|\
 hfcl,ion4x_2|\

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -34,10 +34,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-       cig,wf660a)
+	cig,wf660a|\
+	emplus,wap386v2)
 		ucidef_set_interface_wan "eth0"		
 		;;
-
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -76,6 +76,9 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ip link set eth0 address $wan_mac
 		;;
+	emplus,wap386v2)
+		wan_mac=$(cat /sys/class/net/eth0/address)
+		;;
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -76,6 +76,7 @@ case "$FIRMWARE" in
 	cig,wf188n|\
 	cig,wf660a|\
 	edgecore,eap101|\
+	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -109,7 +110,8 @@ ath11k-macs)
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
-	cig,wf188n)
+	cig,wf188n|\
+	emplus,wap386v2)
 		ath11k_generate_macs
 		;;
 	cig,wf660a)

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -122,6 +122,7 @@ platform_check_image() {
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
+	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -145,7 +146,8 @@ platform_do_upgrade() {
 	cig,wf660a)
 		spi_nor_emmc_do_upgrade_bootconfig $1
 		;;
-	cig,wf188n)
+	cig,wf188n|\
+	emplus,wap386v2)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
 			CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-emplus-wap386v2.dts

@@ -0,0 +1,356 @@
+/*
+ * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+#include "ipq6018-cpr-regulator.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Emplus WAP386 v2";
+	compatible = "emplus,wap386v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	gpio-reserved-ranges = <20 1>;
+
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <3>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <4>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x08>; /* lan port bitmap */
+		switch_wan_bmp = <0x10>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <2>;
+				phy_address = <3>;
+			};
+			port@1 {
+				port_id = <3>;
+				phy_address = <4>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@9 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power: led@28 {
+			label = "red:power";
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:red:power";
+			default-state = "on";
+		};
+		led@29 {
+			label = "blue:wan";
+			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:eth";
+			default-state = "on";
+		};
+		led@30 {
+			label = "blue:wifi2";
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:2g";
+			default-state = "on";
+		};
+		led@31 {
+			label = "blue:wifi5";
+			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:5g";
+			default-state = "on";
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x30>;
+};
+
+&pcie_phy {
+	status = "ok";
+};
+
+&pcie0 {
+#if defined(__CNSS2__)
+	status = "ok";
+#endif
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&qpic_nand {
+	status = "ok";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&CPU0 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU1 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU2 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU3 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&rpm_glink {
+	status = "disabled";
+};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -76,6 +76,15 @@ define Device/edgecore_eap101
 endef
 TARGET_DEVICES += edgecore_eap101
 
+define Device/emplus_wap386v2
+  DEVICE_TITLE := Emplus WAP386v2
+  DEVICE_DTS := qcom-ipq6018-emplus-wap386v2
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := emplus,wap386v2
+  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-env
+endef
+TARGET_DEVICES += emplus_wap386v2
+
 define Device/indio_um-310ax-v1
   DEVICE_TITLE := Indio UM-310AX V1
   DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,14 +16,14 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_sonicfi() {
+ath11k_generate_macs_rap650c() {
 	mac=$(fw_printenv -n BaseMacAddress)
 	[ -z "$mac" ] && return;
 
 	touch /lib/firmware/ath11k-macs
 	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
+	mac1=$(macaddr_add $eth 3)
+	mac2=$(macaddr_add $eth 2)
 	mac3=$(macaddr_add $eth 4)
 	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
 	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
@@ -112,8 +112,8 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
-	sonicfi*)
-		ath11k_generate_macs_sonicfi
+	sonicfi,rap650c)
+		ath11k_generate_macs_rap650c
 		;;
 	esac
 	;;

feeds/ipq807x_v5.4/mac80211/patches/pending/999-remove-kernel-warn-msg-abnormal-he-nss-value.patch

@@ -6,7 +6,7 @@
  		return 0;
 -	if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8))
 +	if (rate->nss < 1 || rate->nss > 8) {
-+		printk_once(1, "invalid rate->nss: %d\n", rate->nss);
++		printk_once(KERN_WARNING "cfg80211_calculate_bitrate_he: invalid rate->nss: %d\n", rate->nss);
  		return 0;
 -
 +	}

feeds/ipq807x_v5.4/mac80211/patches/pending/a-003-fix-roaming-firmware-crash.patch

@@ -0,0 +1,119 @@
+--- a/drivers/net/wireless/ath/ath11k/peer.c
++++ b/drivers/net/wireless/ath/ath11k/peer.c
+@@ -819,10 +819,7 @@ int ath11k_peer_delete(struct ath11k *ar
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+ 		mutex_unlock(&ar->ab->base_ast_lock);
+ #endif
+-		ath11k_warn(ar->ab,
+-			    "failed to find peer vdev_id %d addr %pM in delete\n",
+-			    vdev_id, addr);
+-		return -EINVAL;
++		return 0;
+         }
+ 
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+@@ -883,6 +880,7 @@ int ath11k_peer_create(struct ath11k *ar
+ 	struct ieee80211_vif *vif = arvif->vif;
+ 	struct ath11k_sta *arsta;
+ 	int ret, fbret;
++	u8 vdev_id = 0;
+ 
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 
+@@ -891,20 +889,21 @@ int ath11k_peer_create(struct ath11k *ar
+ 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
+ 		return -ENOBUFS;
+ 	}
++
+ 	mutex_lock(&ar->ab->tbl_mtx_lock);
+ 	spin_lock_bh(&ar->ab->base_lock);
+ 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
++	if (peer)
++		vdev_id = peer->vdev_id;
++	spin_unlock_bh(&ar->ab->base_lock);
++	mutex_unlock(&ar->ab->tbl_mtx_lock);
++
+ 	if (peer) {
+-		if (peer->vdev_id == param->vdev_id) {
+-			spin_unlock_bh(&ar->ab->base_lock);
+-			mutex_unlock(&ar->ab->tbl_mtx_lock);
++		if (vdev_id == param->vdev_id)
+ 			return -EINVAL;
+-		}
+-		ath11k_peer_rhash_delete(ar->ab, peer);
+-	}
+ 
+-	spin_unlock_bh(&ar->ab->base_lock);
+-	mutex_unlock(&ar->ab->tbl_mtx_lock);
++		ath11k_peer_delete(ar, vdev_id, param->peer_addr);
++	}
+ 
+ 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
+ 	if (ret) {
+--- a/drivers/net/wireless/ath/ath11k/dp.c
++++ b/drivers/net/wireless/ath/ath11k/dp.c
+@@ -28,7 +28,7 @@ void ath11k_dp_peer_cleanup(struct ath11
+ 	spin_lock_bh(&ab->base_lock);
+ 	peer = ath11k_peer_find(ab, vdev_id, addr);
+ 	if (!peer) {
+-		ath11k_warn(ab, "failed to lookup peer %pM on vdev %d\n",
++		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to lookup peer %pM on vdev %d\n",
+ 			    addr, vdev_id);
+ 		spin_unlock_bh(&ab->base_lock);
+ 		return;
+--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
++++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
+@@ -1204,9 +1204,9 @@ int ath11k_dp_rx_ampdu_stop(struct ath11
+ 
+ 	peer = ath11k_peer_find(ab, vdev_id, params->sta->addr);
+ 	if (!peer) {
+-		ath11k_warn(ab, "failed to find the peer to stop rx aggregation\n");
++		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to find the peer to stop rx aggregation\n");
+ 		spin_unlock_bh(&ab->base_lock);
+-		return -ENOENT;
++		return 0;
+ 	}
+ 
+ 	paddr = peer->rx_tid[params->tid].paddr;
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -4075,7 +4075,7 @@ static int ath11k_clear_peer_keys(struct
+ 	peer = ath11k_peer_find(ab, arvif->vdev_id, addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ab->base_lock);
+-		return -ENOENT;
++		return 0;
+ 	}
+ 	for (i = 0; i < ARRAY_SIZE(keys); i++) {
+ 		keys[i]= peer->keys[i];
+@@ -4325,6 +4325,10 @@ static int ath11k_mac_op_set_key(struct
+ 
+ 	spin_lock_bh(&ab->base_lock);
+ 	peer = ath11k_peer_find(ab, arvif->vdev_id, peer_addr);
++	if (!peer && cmd == DISABLE_KEY) {
++		ret = 0;
++		goto unlock;
++	}
+ 
+ 	/* TODO: Check if vdev specific security cfg is mandatory */
+ 	ret = ath11k_nss_vdev_set_cmd(arvif, ATH11K_NSS_WIFI_VDEV_SECURITY_TYPE_CMD, key->cipher);
+@@ -5961,7 +5965,7 @@ static void ath11k_mac_op_sta_rc_update(
+ 	peer = ath11k_peer_find(ar->ab, arvif->vdev_id, sta->addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ar->ab->base_lock);
+-		ath11k_warn(ar->ab, "mac sta rc update failed to find peer %pM on vdev %i\n",
++		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac sta rc update failed to find peer %pM on vdev %i\n",
+ 			    sta->addr, arvif->vdev_id);
+ 		return;
+ 	}
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -8425,7 +8425,7 @@ static void ath11k_peer_sta_kickout_even
+ 	peer = ath11k_peer_find_by_addr(ab, arg.mac_addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ab->base_lock);
+-		ath11k_warn(ab, "peer not found %pM\n",
++		ath11k_dbg(ab, ATH11K_DBG_WMI, "peer not found %pM\n",
+ 			    arg.mac_addr);
+ 		goto exit;
+ 	}

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/init.d/bootcount

@@ -8,6 +8,9 @@ boot() {
 	edgecore,eap112)
 		bootcount=$(fw_printenv -n bootcount)
 		[ "$bootcount" != 0 ] && fw_setenv bootcount 0
+		# enable dualboot
+		avail=$(fw_printenv -n upgrade_available)
+		[ ${avail} -eq 0 ] && fw_setenv upgrade_available 1
 		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/upgrade/platform.sh

@@ -1,6 +1,6 @@
 REQUIRE_IMAGE_METADATA=1
 
-senao_swap_active_fw() {
+swap_wap588m_active_fw() {
 	echo "Doing swap active_fw" > /dev/console
         tmp_active_fw=$(fw_printenv | grep active_fw | awk -F= {'print $2'})
 	if [ $tmp_active_fw == "0" ]; then
@@ -12,6 +12,18 @@ senao_swap_active_fw() {
 	fi
 }
 
+senao_swap_active_fw() {
+	echo "Doing swap active_fw" > /dev/console
+	tmp_active_fw=$(fw_printenv -n active_fw)
+	if [ $tmp_active_fw == "0" ]; then
+		fw_setenv active_fw 1
+		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi_1\),112640k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+	else
+		fw_setenv active_fw 0
+		fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),112640k\(ubi\),112640k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+	fi
+}
+
 platform_do_upgrade() {
 	local board=$(board_name)
 
@@ -94,5 +106,8 @@ platform_post_upgrade_success() {
 		senao,jeap6500)
 			senao_swap_active_fw
 		;;
+		emplus,wap588m)
+			swap_wap588m_active_fw
+		;;
 	esac
 }

feeds/mediatek-sdk/mt76/Makefile

@@ -493,10 +493,22 @@ define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR)/tools
 endef
 
+
 define Build/Install
 	:
 endef
 
+ifdef CONFIG_TARGET_PROFILE
+TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
+PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
+endif
+
+define Build/Patch
+	$(Build/Patch/Default)
+	$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_PROFILE_NAME)/,profile/)
+endef
+
+
 define Package/kmod-mt76/install
 	true
 endef

feeds/mediatek-sdk/mt76/patches-emplus_wap588m/3000-wifi-mt76-mt7915-emplus-wap588m-thermal-protech.patch

@@ -0,0 +1,26 @@
+Index: mt76-2024-04-03-1e336a85/mt7915/mt7915.h
+===================================================================
+--- mt76-2024-04-03-1e336a85.orig/mt7915/mt7915.h
++++ mt76-2024-04-03-1e336a85/mt7915/mt7915.h
+@@ -71,8 +71,8 @@
+ #define MT7915_CFEND_RATE_DEFAULT	0x49	/* OFDM 24M */
+ #define MT7915_CFEND_RATE_11B		0x03	/* 11B LP, 11M */
+ 
+-#define MT7915_THERMAL_THROTTLE_MAX	100
+-#define MT7915_CDEV_THROTTLE_MAX	99
++#define MT7915_THERMAL_THROTTLE_MAX	80
++#define MT7915_CDEV_THROTTLE_MAX	79
+ 
+ #define MT7915_SKU_RATE_NUM		161
+ #define MT7915_SKU_PATH_NUM		185
+@@ -86,8 +86,8 @@
+ 
+ #define MT7915_CRIT_TEMP_IDX		0
+ #define MT7915_MAX_TEMP_IDX		1
+-#define MT7915_CRIT_TEMP		110
+-#define MT7915_MAX_TEMP			120
++#define MT7915_CRIT_TEMP		103
++#define MT7915_MAX_TEMP			118
+ 
+ struct mt7915_vif;
+ struct mt7915_sta;

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -121,8 +121,6 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
@@ -147,7 +145,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		rts_threshold beacon_rate maxassoc \
 		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
 		maxassoc_ignore_probe band
 
@@ -244,8 +242,6 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
-	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -427,6 +423,9 @@ hostapd_common_add_bss_config() {
 
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
+
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -680,7 +679,8 @@ hostapd_set_bss_options() {
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
+		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk \
+		rssi_reject_assoc_rssi rssi_ignore_probe_request
 
 	set_default fils 0
 	set_default isolate 0
@@ -737,6 +737,8 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
@@ -775,11 +777,16 @@ hostapd_set_bss_options() {
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
 		;;
-		psk-sae|psk2-radius|eap-eap2)
+		psk-sae|eap-eap2)
 			set_default ieee80211w 1
 			set_default sae_require_mfp 1
 			[ "$ppsk" -eq 0 ] && set_default sae_pwe 2
 		;;
+                psk2-radius)
+			set_default ieee80211w 1
+			set_default sae_require_mfp 0
+			[ "$ppsk" -eq 0 ] && set_default sae_pwe 4
+                ;;
 	esac
 	[ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
 	[ -n "$sae_pwe" ] && append bss_conf "sae_pwe=$sae_pwe" "$N"

feeds/qca-wifi-7/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = config.multi_psk;
+			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
-	if (!is_ssid_mpsk(data.iface))
-		return;
-
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
+		if (!is_ssid_mpsk(data.iface))
+			return;
+
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null)
+		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/qca-wifi-7/hostapd/patches/zzz-ignore-probe-event.patch

@@ -0,0 +1,14 @@
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
+ 	int ubus_response;
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+-	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
++	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
++		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
+ 		return;
++	}
+ 
+ 	if (len < IEEE80211_HDRLEN)
+ 		return;

feeds/qca-wifi-7/hostapd/src/src/ap/ubus.c

@@ -1923,6 +1923,21 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
+{
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	if (!addr)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", addr);
+	blobmsg_add_u32(&b, "rssi", rssi);
+
+	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
+}
+
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/qca-wifi-7/hostapd/src/src/ap/ubus.h

@@ -56,6 +56,7 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -19,15 +19,6 @@ sonicfi,rap750e-s|\
 sonicfi,rap750w-311a)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
-zyxel,nwa130be)
-	#eth0: APPE: phyaddr 4  green:2.5G  orange:others
-	ssdk_sh debug phy set 4 0x40078074 0x670
-	ssdk_sh debug phy set 4 0x40078078 0x8600
-
-	#eth1:  MHT: phyaddr 3  green:2.5G orange:others
-	ssdk_sh debug phy set 3 0x40078074 0x670
-	ssdk_sh debug phy set 3 0x40078078 0x8600
-	;;
 esac
 
 board_config_flush

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -20,7 +20,7 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
 	sonicfi,rap7110c-341x|\
-	sonicfi,rap750e-h|\)
+	sonicfi,rap750e-h|\
 	sonicfi,rap750e-s)
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
@@ -95,7 +95,7 @@ qcom_setup_macs()
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
-                [ "$board" = "sonicfi,rap7110c-34x" ] &&
+                [ "$board" = "sonicfi,rap7110c-341x" ] &&
                     ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
                 ;;
         sonicfi,rap750w-311a)

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/phy_quirks

@@ -0,0 +1,22 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	. /lib/functions.sh
+
+	case "$(board_name)" in
+	edgecore,eap105)
+		ssdk_sh debug phy set 0x1 0x601FD032 0xff
+		;;
+	zyxel,nwa130be)
+		#eth0: APPE: phyaddr 4  green:2.5G  orange:others
+		ssdk_sh debug phy set 4 0x40078074 0x670
+		ssdk_sh debug phy set 4 0x40078078 0x8600
+
+		#eth1:  MHT: phyaddr 3  green:2.5G orange:others
+		ssdk_sh debug phy set 3 0x40078074 0x670
+		ssdk_sh debug phy set 3 0x40078078 0x8600
+		;;
+	esac
+}

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -132,6 +132,8 @@ platform_do_upgrade() {
 
 	board=$(board_name)
 	case $board in
+	sercomm,ap72tip-v4|\
+	sercomm,ap72tip|\
 	cig,wf189w|\
 	cig,wf189h|\
 	cig,wf189)
@@ -171,10 +173,6 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
-	sercomm,ap72tip-v4|\
-	sercomm,ap72tip)
-		nand_upgrade_tar "$1"
-		;;
 	zyxel,nwa130be)
 		nand_upgrade_tar "$1"
 		;;

feeds/qca-wifi-7/ipq53xx/config-6.1

@@ -1223,3 +1223,5 @@ CONFIG_PSTORE=y
 CONFIG_PSTORE_CONSOLE=y
 CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_RAM=y
+# CONFIG_RTL8221D_PHY is not set
+# CONFIG_INPUT_LSM303AGR is not set

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip-v4.dts

@@ -15,7 +15,7 @@
 #include "ipq5332-default-memory.dtsi"
 
 / {
-	model = "Sercomm WiFi-7";
+	model = "Sercomm AP72TIP-v4";
 	compatible = "sercomm,ap72tip-v4", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
 
 	aliases {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip.dts

@@ -15,7 +15,7 @@
 #include "ipq5332-default-memory.dtsi"
 
 / {
-	model = "Sercomm WiFi-7";
+	model = "Sercomm AP72TIP";
 	compatible = "sercomm,ap72tip", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
 
 	aliases {
@@ -255,7 +255,7 @@
 					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
 				};
 		};
-/*
+		
 		gpio_keys {
 			compatible = "gpio-keys";
 			pinctrl-0 = <&button_pins>;
@@ -263,11 +263,11 @@
 			button@1 {
 				label = "rst";
 				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+				gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
-		};*/
+		};
 
 		wsi: wsi {
 			id = <0>;
@@ -546,13 +546,13 @@
 		drive-strength = <8>;
 		bias-pull-down;
 	};*/
-/*
+	
 	button_pins: button-state {
-		pins = "gpio25";
+		pins = "gpio1";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
-	};*/
+	};
 
 	pwm_pins: pwm-state {
 		pins = "gpio46";

feeds/qca-wifi-7/iwinfo/files-iwinfo/usr/share/ucode/iwinfo.uc

@@ -397,7 +397,7 @@ export function info(name) {
 			mode: data.mode,
 			channel: format_channel(data.wiphy_freq),
 			freq: format_frequency(data.wiphy_freq),
-			htmode: data.radio.htmode,
+			htmode: data?.radio?.htmode,
 			center_freq1: format_channel(data.center_freq1) || 'unknown',
 			center_freq2: format_channel(data.center_freq2) || 'unknown',
 			txpower: data.wiphy_tx_power_level / 100,

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -88,6 +88,8 @@ cig,wf189h|\
 cig,wf186h|\
 cig,wf196|\
 cig,wf188n|\
+emplus,wap385c|\
+emplus,wap386v2|\
 yuncore,ax840|\
 yuncore,fap655)
 	PART_NAME=rootfs_1

feeds/ucentral/ucentral-client/files/etc/init.d/cpm

@@ -0,0 +1,14 @@
+#!/bin/sh /etc/rc.common
+
+START=90
+STOP=01
+
+boot() {
+    mkdir -p /tmp/cpm/ || { logger -t init "Failed to create /tmp/cpm"; exit 1; }
+    opkg list-installed > /tmp/packages.state || { logger -t init "Failed to list packages"; exit 1; }
+    if [ -x /usr/share/ucentral/package_list.uc ]; then
+        /usr/share/ucentral/package_list.uc || { logger -t init "Failed to execute package_list.uc"; exit 1; }
+    else
+        logger -t init "package_list.uc not found or not executable"
+    fi
+}

feeds/ucentral/ucentral-client/files/etc/ucentral/version.json

@@ -1,5 +1,5 @@
 {
 	"major": 4,
-	"minor": 0,
+	"minor": 1,
 	"patch": 0
 }

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=ee5d5073bd9ae88590e419f94eb6c59f04a2fc0c3117be435bcb885e0ea28bf1
+PKG_MIRROR_HASH:=aac8731d564f4ccd85a366417b9a02c1d3de9b6533d1474b58768249c50707f1
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-01-27
-PKG_SOURCE_VERSION:=b4cfdc6a1caa279ae8c6c42b6932620fb2aed9c1
+PKG_SOURCE_DATE:=2025-06-27
+PKG_SOURCE_VERSION:=125a148764c9ef7a02086b6fadccd7b96bfdf591
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

patches/0090-netifd-add-gcmp-256-as-a-cipher-suite-when-SAE-is-en.patch

@@ -0,0 +1,59 @@
+From 6866492b26cf59d5557d1ea0fdae24834410afff Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Wed, 11 Jun 2025 14:24:48 +0200
+Subject: [PATCH] netifd: add gcmp-256 as a cipher suite when SAE is enabled on
+ HE/EHT
+
+Fixes: WIFI-14594
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ .../config/netifd/patches/200-gcmp-256.patch  | 37 +++++++++++++++++++
+ 1 file changed, 37 insertions(+)
+ create mode 100644 package/network/config/netifd/patches/200-gcmp-256.patch
+
+diff --git a/package/network/config/netifd/patches/200-gcmp-256.patch b/package/network/config/netifd/patches/200-gcmp-256.patch
+new file mode 100644
+index 0000000000..defe66a816
+--- /dev/null
++++ b/package/network/config/netifd/patches/200-gcmp-256.patch
+@@ -0,0 +1,37 @@
++--- a/scripts/netifd-wireless.sh
+++++ b/scripts/netifd-wireless.sh
++@@ -39,11 +39,10 @@ prepare_key_wep() {
++ }
++ 
++ _wdev_prepare_channel() {
++-	json_get_vars channel band hwmode
+++	json_get_vars channel band hwmode htmode
++ 
++ 	auto_channel=0
++ 	enable_ht=0
++-	htmode=
++ 	hwmode="${hwmode##11}"
++ 
++ 	case "$channel" in
++@@ -80,6 +79,11 @@ _wdev_prepare_channel() {
++ 			esac
++ 		;;
++ 	esac
+++
+++	case "$htmode" in
+++		HE*|EHT*) wpa3_cipher="GCMP-256 ";;
+++		*) wpa3_cipher="";;
+++	esac
++ }
++ 
++ _wdev_handler() {
++@@ -216,6 +220,9 @@ wireless_vif_parse_encryption() {
++ 		wpa_cipher="GCMP"
++ 	else
++ 		wpa_cipher="CCMP"
+++		case "$encryption" in
+++			sae*|wpa3*|psk3*|owe) wpa_cipher="${wpa3_cipher}$wpa_cipher";;
+++		esac
++ 	fi
++ 
++ 	case "$encryption" in
+-- 
+2.34.1
+

profiles/emplus_wap385c.yml

@@ -0,0 +1,26 @@
+---
+profile: emplus_wap385c
+target: ipq50xx
+subtarget: generic
+description: Build image for Emplus WAP385C
+image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-emplus_wap385c-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq50xx
+  - iperf3
+  - lscpu
+  - tree
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=512
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_TFTP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+  CONFIG_BUSYBOX_CONFIG_MPSTAT=y
+  CONFIG_BUSYBOX_CONFIG_PSTREE=y

profiles/emplus_wap386v2.yml

@@ -0,0 +1,24 @@
+---
+profile: emplus_wap386v2
+target: ipq60xx
+subtarget: generic
+description: Build image for the EMPLUS WAP386V2
+image: bin/targets/ipq60xx/generic/openwrt-ipq60xx-emplus_wap386v2-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq60xx
+  - iperf3
+diffconfig: |
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_TFTP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_HPA_COMPAT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+  CONFIG_BUSYBOX_CONFIG_LSOF=y
+  CONFIG_BUSYBOX_CONFIG_MPSTAT=y
+  CONFIG_BUSYBOX_CONFIG_PSTREE=y