feeds.default.conf: switch to using git:// instead of https://

Signed-off-by: Paul White <paul@shasta.cloud>

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-setting.patch

@@ -0,0 +1,107 @@
+# Description: The Mesh11sd daemon expects the mesh interface name to follow the format 'mesh<index>'. 
+# If it doesn't find this format, it attempts to set it in the UCI wireless configuration. 
+# However, when operating in other modes such as AP, STA, or Ad-Hoc, the script was patched to remove 
+# the mesh interface name from UCI. This process can lead to a race condition between the UI and Mesh11sd,
+# resulting in stale interface name values.
+# This patch resolves the issue by removing the setting of the interface name from the script, as it is 
+# now managed through the UI, ensuring consistency and eliminating the race condition.
+
+--- a/src/mesh11sd
++++ b/src/mesh11sd
+@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
+ 
+ 		if [ $mode -eq 5 ]; then
+ 			# startup=4, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 4 ]; then
+ 			# startup=4, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 3 ]; then
+ 			# startup=0, statusmode=2, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 2 ]; then
+ 			# startup=0, statusmode=2, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 1 ]; then
+ 			# startup=0, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 0 ]; then
+ 			# startup=0, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 		fi
+ 
+ 		if [ $mode -ne $lastmode ]; then
+@@ -441,26 +441,6 @@ elif [ "$1" = "daemon" ]; then
+ 			meshconfigs=$(uci show wireless 2> /dev/null | grep "mode='mesh'" | awk -F ".mode='mesh'" '{printf "%s " $1}')
+ 
+ 			if [ ! -z "$meshconfigs" ]; then
+-				for meshconfig in $meshconfigs; do
+-					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
+-
+-					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
+-						# No interface name in config, so add one
+-						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
+-						echo "$ucibatch" | uci batch
+-						changed=1
+-						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
+-						write_to_syslog
+-					fi
+-					meshindex=$(($meshindex+1))
+-				done
+-
+-				if [ "$changed" -eq 1 ]; then
+-					changed=0
+-					restart_mesh
+-					continue
+-				fi
+-
+ 				# get a list of interfaces
+ 				get_mesh_iflist
+ 
+@@ -482,13 +462,13 @@ elif [ "$1" = "daemon" ]; then
+ 						# this is not a mesh interface
+ 						continue
+ 					else
+-						# Check if this interface has a uci ifname
+-						uciname=$(uci show wireless | grep "ifname='$iface'" | awk -F "." '{printf "wireless.%s" $2}')
++						# Check if this interface mode is 'mesh'
++						uciname=$(uci show wireless | grep "mode='mesh'" | awk -F "." '{printf "wireless.%s" $2}')
+ 
+ 						if [ -z "$uciname" ]; then
+-							# Error - No interface name in config, we should have added one
++							# Error - No interface with mode as mesh
+ 							debugtype="err"
+-							syslogmessage="Error getting mesh interface name"
++							syslogmessage="Error getting mesh interface section"
+ 							write_to_syslog
+ 							continue
+ 						fi

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-upon-disable.patch

@@ -1,63 +0,0 @@
-# Description: The Mesh11sd daemon sets the interface name 'mesh<index>' to the mesh interface.
-# However, even after disabling the mesh mode, this interface name persists, leading to confusion
-# when operating in other modes like AP/STA/Ad-Hoc, where the interface name continues to display as 'mesh<idx>'.
-# This patch addresses the issue by removing the 'mesh<idx>' interface name from the configuration when the device
-# is no longer in mesh mode. As this modification is not present in the upstream version, it is necessary to apply
-# this local patch to resolve the inconsistency
-
-diff --git a/src/mesh11sd b/src/mesh11sd
-index 85041d3..5f50e97 100755
---- a/src/mesh11sd
-+++ b/src/mesh11sd
-@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
- 
- 		if [ $mode -eq 5 ]; then
- 			# startup=4, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 4 ]; then
- 			# startup=4, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 3 ]; then
- 			# startup=0, statusmode=2, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 2 ]; then
- 			# startup=0, statusmode=2, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 1 ]; then
- 			# startup=0, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 
- 		elif [ $mode -eq 0 ]; then
- 			# startup=0, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 		fi
- 
- 		if [ $mode -ne $lastmode ]; then

feeds/morse/utils/morse_mesh11sd/patches/003-accton_fix_ifname_confliction.patch

@@ -1,39 +0,0 @@
---- a/src/mesh11sd	2024-09-06 17:13:52.075070001 +0800
-+++ b/src/mesh11sd	2024-09-06 17:47:36.326914438 +0800
-@@ -434,7 +434,6 @@
- 		fi
- 
- 		lastmode=$mode
--		meshindex=0
- 
- 		if [ "$enabled" = 1 ]; then
- 			#get list of mesh configs
-@@ -443,16 +442,19 @@
- 			if [ ! -z "$meshconfigs" ]; then
- 				for meshconfig in $meshconfigs; do
- 					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
--
--					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
--						# No interface name in config, so add one
--						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
--						echo "$ucibatch" | uci batch
--						changed=1
--						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
--						write_to_syslog
-+					device=$(uci -q get $meshconfig.device)
-+					device_type=$(uci -q get wireless.$device.type)
-+					new_ifname="halow_mesh"
-+					if [ "$device_type" == "morse" ]; then
-+						if [ -z "$ifname" ] || [ "$ifname" != "$new_ifname" ]; then
-+							# No interface name in config, so add one
-+							ucibatch="set $meshconfig.ifname='$new_ifname'"
-+							echo "$ucibatch" | uci batch
-+							changed=1
-+							syslogmessage="Setting mesh interface name to [ $new_ifname ]"
-+							write_to_syslog
-+						fi
- 					fi
--					meshindex=$(($meshindex+1))
- 				done
- 
- 				if [ "$changed" -eq 1 ]; then

feeds/morse/utils/wpa_supplicant_s1g/Config.in

@@ -2,7 +2,7 @@ if PACKAGE_wpa_supplicant_s1g
 
 	config MORSE_WPA_SUPPLICANT_S1G_MESH_NETWORKING
 		bool
-		default y
+		default n
 		prompt "Enable mesh networking support"
 
 	config MORSE_WPA_SUPPLICANT_S1G_EAP

patches/0095-feeds.default.conf-switch-to-using-git-instead-of-ht.patch

@@ -0,0 +1,27 @@
+From 0f590999ea33fb91160aec123a9a74c31623584e Mon Sep 17 00:00:00 2001
+From: Paul White <paul@shasta.cloud>
+Date: Mon, 21 Jul 2025 22:41:52 +0000
+Subject: [PATCH] feeds.default.conf: switch to using git:// instead of
+ https://
+
+Signed-off-by: Paul White <paul@shasta.cloud>
+---
+ feeds.conf.default | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/feeds.conf.default b/feeds.conf.default
+index d467db5627..bafcf8aa98 100644
+--- a/feeds.conf.default
++++ b/feeds.conf.default
+@@ -1,4 +1,4 @@
+-src-git packages https://git.openwrt.org/feed/packages.git;openwrt-23.05
+-src-git luci https://git.openwrt.org/project/luci.git;openwrt-23.05
+-src-git routing https://git.openwrt.org/feed/routing.git;openwrt-23.05
+-src-git telephony https://git.openwrt.org/feed/telephony.git;openwrt-23.05
++src-git packages git://git.openwrt.org/feed/packages.git;openwrt-23.05
++src-git luci git://git.openwrt.org/project/luci.git;openwrt-23.05
++src-git routing git://git.openwrt.org/feed/routing.git;openwrt-23.05
++src-git telephony git://git.openwrt.org/feed/telephony.git;openwrt-23.05
+-- 
+2.43.0
+