feeds.default.conf: switch to using git:// instead of https://

Signed-off-by: Paul White <paul@shasta.cloud>

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -24,6 +24,8 @@ endef
 #
 
 ALLWIFIBOARDS:= \
+	cig-wf186w \
+	cig-wf186h \
 	cig-wf660a \
 	cig-wf194c \
 	cig-wf194c4 \
@@ -106,16 +108,6 @@ $(call Package/ath11k-wifi-default)
     TITLE:=cig-wf196 bdf
 endef
 
-define Package/ath11k-wifi-cig-wf186w
-$(call Package/ath11k-wifi-default)
-    TITLE:=cig-wf186w bdf
-endef
-
-define Package/ath11k-wifi-cig-wf186h
-$(call Package/ath11k-wifi-default)
-    TITLE:=cig-wf186h bdf
-endef
-
 define Package/ath11k-wifi-gl-ax1800
 $(call Package/ath11k-wifi-default)
     TITLE:=gl-ax1800 bdf
@@ -292,24 +284,6 @@ define Package/ath11k-wifi-cig-wf196/install
 	$(INSTALL_DATA) ./board-cig-wf196-us.bin.IPQ8074 $(1)/lib/firmware/ath11k/IPQ8074/hw2.0/board.bin.US
 endef
 
-define Package/ath11k-wifi-cig-wf186w/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
-	$(INSTALL_DATA) ./board-cig-wf186w-us.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186w-ca.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA
-	$(INSTALL_DATA) ./board-cig-wf186w-us.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186w-ca.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA
-endef
-
-define Package/ath11k-wifi-cig-wf186h/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
-	$(INSTALL_DATA) ./board-cig-wf186h-us.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186h-ca.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA
-	$(INSTALL_DATA) ./board-cig-wf186h-us.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186h-ca.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA
-endef
-
 define Package/ath11k-wifi-optimcloud-d50/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/QCN9074/hw1.0/
@@ -419,6 +393,8 @@ define Package/ath11k-wifi-cig-wf188n/install
 	$(INSTALL_DATA) ./board-cig-wf188n-us.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board.bin.US
 endef
 
+$(eval $(call generate-ath11k-wifi-package,cig-wf186w,Cigtech WF186w))
+$(eval $(call generate-ath11k-wifi-package,cig-wf186h,Cigtech WF186h))
 $(eval $(call generate-ath11k-wifi-package,cig-wf660a,Cigtech WF660a))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
@@ -464,8 +440,6 @@ $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq8074))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq6018))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-qcn9000))
 $(eval $(call BuildPackage,ath11k-wifi-cig-wf196))
-$(eval $(call BuildPackage,ath11k-wifi-cig-wf186w))
-$(eval $(call BuildPackage,ath11k-wifi-cig-wf186h))
 $(eval $(call BuildPackage,ath11k-wifi-motorola-q14))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d50))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d60))

feeds/ipq807x_v5.4/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude || 0;
-let longitude = gps_info.longitude || 0;
+let latitude = gps_info.latitude ?? 0;
+let longitude = gps_info.longitude ?? 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation || 0;
+afc_location.height = gps_info.elevation ?? 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = int(gps_info.major_axis) || 1;
-afc_location.minor_axis = int(gps_info.minor_axis) || 1;
-afc_location.orientation = gps_info.major_orientation || 0;
-afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
+afc_location.major_axis = gps_info.major_axis ?? 0;
+afc_location.minor_axis = gps_info.minor_axis ?? 0;
+afc_location.orientation = gps_info.major_orientation ?? 0;
+afc_location.vertical_tolerance = gps_info.vdop ?? 0;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/ipq807x_v5.4/hostapd/files/hostapd.uc

@@ -1,8 +1,7 @@
 let libubus = require("ubus");
-import { open, readfile, writefile } from "fs";
+import { open, readfile } from "fs";
 import { wdev_create, wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open } from "common";
 
-let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -894,24 +893,10 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let wireless_config = uci.get_all('wireless');
-		for (let l, afc_server in wireless_config) {
-			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
-				hostapd.printf(`Sending AFC request: ${data}`);
-				writefile("/tmp/afc-request.json", data);
-
-				if (afc_server.access_token)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-				else if (afc_server.cert)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-
-				let afc_response = (readfile("/tmp/afc-response.json"));
-				if (afc_response)
-					return afc_response;
-				else
-					return;
-			}
-		}
+		let ret = ubus.call("afc", "request", { data });
+		if (type(ret) != "object")
+			return;
+		return ret.data;
 	},
 	bss_add: function(name, obj) {
 		bss_event("add", name);

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -251,32 +251,6 @@ ath11k-macs)
 		;;
 	esac
 	;;
-ath11k/IPQ5018/hw1.0/board.bin)
-	case "$board" in
-	cig,wf186w|\
-	cig,wf186h)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
-                else
-                        ln -s /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
-                fi
-                ;;
-	esac
-	;;
-ath11k/qcn6122/hw1.0/board.bin)
-	case "$board" in
-	cig,wf186w|\
-	cig,wf186h)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA /lib/firmware/ath11k/qcn6122/hw1.0/board.bin
-                else
-                        ln -s /lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US /lib/firmware/ath11k/qcn6122/hw1.0/board.bin
-                fi
-                ;;
-	esac
-	;;
 *)
 	exit 1
 	;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/hotplug.d/iface/99-mtk-sr-scene-cond

@@ -34,11 +34,13 @@ case "$board" in
 
         if [ -f "$phy0_file" ]; then
             check_phy0=$(cat $phy0_file)
+            echo "check_phy0 = $check_phy0"
             [ "$check_phy0" == 0 ] && echo 1 > $phy0_file
         fi
 
         if [ -f "$phy1_file" ]; then
             check_phy1=$(cat $phy1_file)
+            echo "check_phy1 = $check_phy1"
             [ "$check_phy1" == 0 ] && echo 1 > $phy1_file
         fi
 

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-setting.patch

@@ -0,0 +1,107 @@
+# Description: The Mesh11sd daemon expects the mesh interface name to follow the format 'mesh<index>'. 
+# If it doesn't find this format, it attempts to set it in the UCI wireless configuration. 
+# However, when operating in other modes such as AP, STA, or Ad-Hoc, the script was patched to remove 
+# the mesh interface name from UCI. This process can lead to a race condition between the UI and Mesh11sd,
+# resulting in stale interface name values.
+# This patch resolves the issue by removing the setting of the interface name from the script, as it is 
+# now managed through the UI, ensuring consistency and eliminating the race condition.
+
+--- a/src/mesh11sd
++++ b/src/mesh11sd
+@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
+ 
+ 		if [ $mode -eq 5 ]; then
+ 			# startup=4, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 4 ]; then
+ 			# startup=4, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 3 ]; then
+ 			# startup=0, statusmode=2, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 2 ]; then
+ 			# startup=0, statusmode=2, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 1 ]; then
+ 			# startup=0, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 0 ]; then
+ 			# startup=0, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 		fi
+ 
+ 		if [ $mode -ne $lastmode ]; then
+@@ -441,26 +441,6 @@ elif [ "$1" = "daemon" ]; then
+ 			meshconfigs=$(uci show wireless 2> /dev/null | grep "mode='mesh'" | awk -F ".mode='mesh'" '{printf "%s " $1}')
+ 
+ 			if [ ! -z "$meshconfigs" ]; then
+-				for meshconfig in $meshconfigs; do
+-					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
+-
+-					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
+-						# No interface name in config, so add one
+-						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
+-						echo "$ucibatch" | uci batch
+-						changed=1
+-						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
+-						write_to_syslog
+-					fi
+-					meshindex=$(($meshindex+1))
+-				done
+-
+-				if [ "$changed" -eq 1 ]; then
+-					changed=0
+-					restart_mesh
+-					continue
+-				fi
+-
+ 				# get a list of interfaces
+ 				get_mesh_iflist
+ 
+@@ -482,13 +462,13 @@ elif [ "$1" = "daemon" ]; then
+ 						# this is not a mesh interface
+ 						continue
+ 					else
+-						# Check if this interface has a uci ifname
+-						uciname=$(uci show wireless | grep "ifname='$iface'" | awk -F "." '{printf "wireless.%s" $2}')
++						# Check if this interface mode is 'mesh'
++						uciname=$(uci show wireless | grep "mode='mesh'" | awk -F "." '{printf "wireless.%s" $2}')
+ 
+ 						if [ -z "$uciname" ]; then
+-							# Error - No interface name in config, we should have added one
++							# Error - No interface with mode as mesh
+ 							debugtype="err"
+-							syslogmessage="Error getting mesh interface name"
++							syslogmessage="Error getting mesh interface section"
+ 							write_to_syslog
+ 							continue
+ 						fi

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-upon-disable.patch

@@ -1,63 +0,0 @@
-# Description: The Mesh11sd daemon sets the interface name 'mesh<index>' to the mesh interface.
-# However, even after disabling the mesh mode, this interface name persists, leading to confusion
-# when operating in other modes like AP/STA/Ad-Hoc, where the interface name continues to display as 'mesh<idx>'.
-# This patch addresses the issue by removing the 'mesh<idx>' interface name from the configuration when the device
-# is no longer in mesh mode. As this modification is not present in the upstream version, it is necessary to apply
-# this local patch to resolve the inconsistency
-
-diff --git a/src/mesh11sd b/src/mesh11sd
-index 85041d3..5f50e97 100755
---- a/src/mesh11sd
-+++ b/src/mesh11sd
-@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
- 
- 		if [ $mode -eq 5 ]; then
- 			# startup=4, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 4 ]; then
- 			# startup=4, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 3 ]; then
- 			# startup=0, statusmode=2, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 2 ]; then
- 			# startup=0, statusmode=2, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 1 ]; then
- 			# startup=0, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 
- 		elif [ $mode -eq 0 ]; then
- 			# startup=0, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 		fi
- 
- 		if [ $mode -ne $lastmode ]; then

feeds/morse/utils/morse_mesh11sd/patches/003-accton_fix_ifname_confliction.patch

@@ -1,39 +0,0 @@
---- a/src/mesh11sd	2024-09-06 17:13:52.075070001 +0800
-+++ b/src/mesh11sd	2024-09-06 17:47:36.326914438 +0800
-@@ -434,7 +434,6 @@
- 		fi
- 
- 		lastmode=$mode
--		meshindex=0
- 
- 		if [ "$enabled" = 1 ]; then
- 			#get list of mesh configs
-@@ -443,16 +442,19 @@
- 			if [ ! -z "$meshconfigs" ]; then
- 				for meshconfig in $meshconfigs; do
- 					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
--
--					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
--						# No interface name in config, so add one
--						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
--						echo "$ucibatch" | uci batch
--						changed=1
--						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
--						write_to_syslog
-+					device=$(uci -q get $meshconfig.device)
-+					device_type=$(uci -q get wireless.$device.type)
-+					new_ifname="halow_mesh"
-+					if [ "$device_type" == "morse" ]; then
-+						if [ -z "$ifname" ] || [ "$ifname" != "$new_ifname" ]; then
-+							# No interface name in config, so add one
-+							ucibatch="set $meshconfig.ifname='$new_ifname'"
-+							echo "$ucibatch" | uci batch
-+							changed=1
-+							syslogmessage="Setting mesh interface name to [ $new_ifname ]"
-+							write_to_syslog
-+						fi
- 					fi
--					meshindex=$(($meshindex+1))
- 				done
- 
- 				if [ "$changed" -eq 1 ]; then

feeds/morse/utils/wpa_supplicant_s1g/Config.in

@@ -2,7 +2,7 @@ if PACKAGE_wpa_supplicant_s1g
 
 	config MORSE_WPA_SUPPLICANT_S1G_MESH_NETWORKING
 		bool
-		default y
+		default n
 		prompt "Enable mesh networking support"
 
 	config MORSE_WPA_SUPPLICANT_S1G_EAP

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -43,11 +43,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for EAP105
 endef
 
-define Package/ath12k-wifi-emplus-wap7635
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for WAP7635
-endef
-
 define Package/ath12k-wifi-sonicfi-rap7110c-341x
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP7710c_341x
@@ -101,8 +96,8 @@ endef
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wf189-us.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.wf189-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.wf189.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.wf189.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
 define Package/ath12k-wifi-edgecore-eap105/install
@@ -112,13 +107,6 @@ define Package/ath12k-wifi-edgecore-eap105/install
 	$(INSTALL_DATA) ./board-2.bin.eap105.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
-define Package/ath12k-wifi-emplus-wap7635/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wap7635.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.wap7635.QCN6274 $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-endef
-
 define Package/ath12k-wifi-sonicfi-rap7110c-341x/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -156,8 +144,8 @@ endef
 define Package/ath12k-wifi-cig-wf189w/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189w-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.189w-us.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.189w.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189w.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
@@ -165,8 +153,8 @@ endef
 define Package/ath12k-wifi-cig-wf189h/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189h-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.189h-us.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
@@ -194,13 +182,12 @@ endef
 define Package/ath12k-wifi-cig-wf672/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wf672-us.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.wf672-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.wf672.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.wf672.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
-$(eval $(call BuildPackage,ath12k-wifi-emplus-wap7635))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-h))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-s))

feeds/qca-wifi-7/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude || 0;
-let longitude = gps_info.longitude || 0;
+let latitude = gps_info.latitude ?? 0;
+let longitude = gps_info.longitude ?? 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation || 0;
+afc_location.height = gps_info.elevation ?? 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = int(gps_info.major_axis) || 1;
-afc_location.minor_axis = int(gps_info.minor_axis) || 1;
-afc_location.orientation = gps_info.major_orientation || 0;
-afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
+afc_location.major_axis = gps_info.major_axis ?? 0;
+afc_location.minor_axis = gps_info.minor_axis ?? 0;
+afc_location.orientation = gps_info.major_orientation ?? 0;
+afc_location.vertical_tolerance = gps_info.vdop ?? 0;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/qca-wifi-7/hostapd/files/hostapd.uc

@@ -1,8 +1,7 @@
 let libubus = require("ubus");
-import { open, readfile, writefile } from "fs";
+import { open, readfile } from "fs";
 import { wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open, wdev_set_radio_mask } from "common";
 
-let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -1007,6 +1006,7 @@ let main_obj = {
 hostapd.data.ubus = ubus;
 hostapd.data.obj = ubus.publish("hostapd", main_obj);
 
+
 let auth_obj = {};
 hostapd.data.auth_obj = ubus.publish("hostapd-auth", auth_obj);
 
@@ -1026,24 +1026,10 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let wireless_config = uci.get_all('wireless');
-		for (let l, afc_server in wireless_config) {
-			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
-				hostapd.printf(`Sending AFC request: ${data}`);
-				writefile("/tmp/afc-request.json", data);
-
-				if (afc_server.access_token)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-				else if (afc_server.cert)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-
-				let afc_response = (readfile("/tmp/afc-response.json"));
-				if (afc_response)
-					return afc_response;
-				else
-					return;
-			}
-		}
+		let ret = ubus.call("afc", "request", { data });
+		if (type(ret) != "object")
+			return;
+		return ret.data;
 	},
 	bss_create: function(phy, name, obj) {
 		phy = hostapd.data.config[phy];

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,11 +7,6 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-emplus,wap7635)
-	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
-	ucidef_set_led_default "ledg" "LEDG" "sys:green" "off"
-	ucidef_set_led_default "ledr" "LEDR" "sys:red" "off"
-	;;
 sercomm,ap72tip-v4|\
 sercomm,ap72tip)
 	ucidef_set_led_default "power" "POWER" "blue:status" "on"

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -13,6 +13,7 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
 		;;
 	cig,wf189|\
+	cig,wf672|\
 	edgecore,eap105|\
 	sercomm,ap72tip|\
 	sonicfi,rap750w-311a)
@@ -31,10 +32,6 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
 		;;
-	cig,wf672)
-		ucidef_set_interface_wan "eth0 eth1"
-		;;
-	emplus,wap7635|\
 	sercomm,ap72tip-v4)
 		ucidef_set_interface_wan "eth0"
 		;;	
@@ -107,7 +104,6 @@ qcom_setup_macs()
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
                 ;;
-        emplus,wap7635|\
         sercomm,ap72tip-v4)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -64,7 +64,6 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
 	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
-	emplus,wap7635|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
 	zyxel,nwa130be)
@@ -87,7 +86,6 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
-	emplus,wap7635|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
 	zyxel,nwa130be)
@@ -126,47 +124,6 @@ ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi2@c0000000.bin)
 		;;
 	esac
 	;;
-ath12k/IPQ5332/hw1.0/board-2.bin)
-	case "$board" in
-	cig,wf189|\
-	cig,wf189h|\
-	cig,wf189w|\
-	cig,wf672)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.CA /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-                else
-                        ln -s /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-                fi
-                ;;
-	esac
-	;;
-ath12k/QCN6432/hw1.0/board-2.bin)
-	case "$board" in
-	cig,wf189h|\
-	cig,wf189w)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.CA /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-                else
-                        ln -s /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-                fi
-                ;;
-	esac
-	;;
-ath12k/QCN92XX/hw1.0/board-2.bin)
-	case "$board" in
-	cig,wf189|\
-	cig,wf672)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.CA /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-                else
-                        ln -s /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-                fi
-                ;;
-	esac
-	;;
 *)
 	exit 1
 	;;

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -136,8 +136,7 @@ platform_do_upgrade() {
 	sercomm,ap72tip|\
 	cig,wf189w|\
 	cig,wf189h|\
-	cig,wf189|\
-	emplus,wap7635)
+	cig,wf189)
 		if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
 			CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
 			CI_BOOTCFG=1

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-emplus-wap7635.dts

@@ -1,413 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Emplus WAP7635";
-	compatible = "emplus,wap7635", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		ethernet0 = "/soc/dp1";
-
-        led-boot = &led_power_green;
-        led-failsafe = &led_power_red;
-        led-running = &led_power_green;
-        led-upgrade = &led_power_green;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 51 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			/*num_devices = <0x1>;*/
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x2>; /* lan port bitmap */
-				switch_wan_bmp = <0>; /* wan port bitmap */
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-			/* phy-mode = "usxgmii"; */
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;			/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;		/* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;			/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;		/* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;			/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;			/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;			/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;				/* Number of PPEDS nodes */
-
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,		/* PPEDS Node#0 ring and queue map */
-							 <2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,			/* Port0 per-core Tx ring map */
-							  <12 13 14 15>,		/* MHT-Port1 per-core Tx ring map */
-							  <4 5 6 7>,			/* MHT-Port2 per-core Tx ring map/packets from  vp*/
-							  <16 17 18 19>,		/* MHT-Port3 per-core Tx ring map */
-							  <20 21 22 23>;		/* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;	/* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;			/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;		/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;				/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-									 <1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-									 <2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-									 <3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-									 <4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-									 <5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-									 <6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-									 <7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,					/* Tx complete ring id #4 IRQ info */
-						 <0 164 4>,					/* Tx complete ring id #5 IRQ info */
-						 <0 165 4>,					/* Tx complete ring id #6 IRQ info */
-						 <0 166 4>,					/* Tx complete ring id #7 IRQ info */
-						 <0 167 4>,					/* Tx complete ring id #8 IRQ info */
-						 <0 168 4>,					/* Tx complete ring id #9 IRQ info */
-						 <0 169 4>,					/* Tx complete ring id #10 IRQ info */
-						 <0 170 4>,					/* Tx complete ring id #11 IRQ info */
-						 <0 171 4>,					/* Tx complete ring id #12 IRQ info */
-						 <0 172 4>,					/* Tx complete ring id #13 IRQ info */
-						 <0 173 4>,					/* Tx complete ring id #14 IRQ info */
-						 <0 174 4>,					/* Tx complete ring id #15 IRQ info */
-						 <0 139 4>,					/* Rx desc ring id #12 IRQ info */
-						 <0 140 4>,					/* Rx desc ring id #13 IRQ info */
-						 <0 141 4>,					/* Rx desc ring id #14 IRQ info */
-						 <0 142 4>,					/* Rx desc ring id #15 IRQ info */
-						 <0 191 4>,					/* Misc error IRQ info */
-						 <0 155 4>,					/* RxFill ring id #4 IRQ info */
-						 <0 156 4>,					/* RxFill ring id #5 IRQ info */
-						 <0 157 4>,					/* RxFill ring id #6 IRQ info */
-						 <0 158 4>,					/* RxFill ring id #7 IRQ info */
-						 <0 160 4>,					/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-						 <0 128 4>,					/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-						 <0 152 4>,					/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-						 <0 161 4>,					/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-						 <0 129 4>,					/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-						 <0 153 4>,					/* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-						 <0 175 4>,					/* MHT port Tx complete ring id #16 IRQ info */
-						 <0 176 4>,					/* MHT port Tx complete ring id #17 IRQ info */
-						 <0 177 4>,					/* MHT port Tx complete ring id #18 IRQ info */
-						 <0 178 4>,					/* MHT port Tx complete ring id #19 IRQ info */
-						 <0 179 4>,					/* MHT port Tx complete ring id #20 IRQ info */
-						 <0 180 4>,					/* MHT port Tx complete ring id #21 IRQ info */
-						 <0 181 4>,					/* MHT port Tx complete ring id #22 IRQ info */
-						 <0 182 4>;					/* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			led_power_blue: led@34 {
-				label = "sys:blue";
-				gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-			led_power_green: led@35 {
-				label = "sys:green";
-				gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-			led_power_red: led@37 {
-				label = "sys:red";
-				gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-						<1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&mhi_region1 {
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-/* QCN9224 5G+6G */
-&wifi4 {
-	hremote_node = <&qcn9224_pcie1>;
-	board_id = <0x1019>;
-	node_id = <0x1>;
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-						 0x4 0x4 0x18 0x3 0x0 0x0     /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-						 0x0 0x4 0x0 0x0 0x0 0x0>;    /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x1019>;
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	button_pins: button-state {
-		pins = "gpio24";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio45";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "disabled";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -52,19 +52,6 @@ define Device/edgecore_eap105
 endef
 TARGET_DEVICES += edgecore_eap105
 
-define Device/emplus_wap7635
-  DEVICE_TITLE := EMPLUS WAP7635
-  DEVICE_DTS := ipq5332-emplus-wap7635
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-emplus-wap7635 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
-endef
-TARGET_DEVICES += emplus_wap7635
-
 define Device/sonicfi_rap7110c_341x
   DEVICE_TITLE := SONICFI RAP7110C-341X
   DEVICE_DTS := ipq5332-sonicfi-rap7110c-341x

feeds/qca-wifi-7/qca-ssdk-qca/Makefile

@@ -100,7 +100,6 @@ endif
 ifdef CONFIG_TARGET_PROFILE
 TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
 PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
-FILES_PROFILE_NAME=files-$(subst DEVICE_,,$(TARGET_PROFILE))
 endif
 
 QCASSDK_CONFIG_OPTS+= TOOL_PATH=$(TOOLCHAIN_BIN_PATH) \
@@ -203,15 +202,6 @@ define patch_profile
 	$(call PatchDir/Default,$(PKG_BUILD_DIR),./$(PATCH_PROFILE_NAME))
 endef
 
-define files_profile
-
-	if [ -d "./$(FILES_PROFILE_NAME)" ]; then \
-		$(CP) ./$(FILES_PROFILE_NAME)/* ./files/ ; \
-	fi
-endef
-
 Hooks/Prepare/Post += patch_profile
-Hooks/Prepare/Post += files_profile
-
 $(eval $(call KernelPackage,qca-ssdk-qca-nohnat))
 $(eval $(call KernelPackage,qca-ssdk-qca-hnat))

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa130be/qca-ssdk

@@ -1,317 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
-# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-
-START=16
-
-#!/bin/sh
-ruletype="ip4 ip6"
-side="wan lan"
-qwan="1 3 2 0 5 7 6 4"
-qlan="0 1 2 3 4 5 6 7"
-
-function create_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		#echo $queue
-		#echo "creating list $listid"
-		ssdk_sh acl list create $listid 255
-		ruleid=0
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
-				#echo $cmd
-				if [ "$rt" == "ip4" ];then
-					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				else
-					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				fi
-				if [ $ruleid -le 3 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				elif [ $ruleid -le 7 ];then
-					#zero dscp
-					cmd="$cmd n"
-				elif [ $ruleid -le 11 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				else
-					#zero dscp
-					cmd="$cmd n"
-				fi
-				p=$((ruleid/2))
-				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
-				#echo $cmd
-				$cmd
-				ruleid=`expr $ruleid + 1`
-			done
-		done
-		ssdk_sh acl list bind $listid 0 1 $portmap
-	done
-}
-
-function create_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 0
-	ssdk_sh cosmap pri2q set 3 0
-	ssdk_sh cosmap pri2q set 4 1
-	ssdk_sh cosmap pri2q set 5 1
-	ssdk_sh cosmap pri2q set 6 1
-	ssdk_sh cosmap pri2q set 7 1
-	ssdk_sh cosmap pri2ehq set 0 0
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 0
-	ssdk_sh cosmap pri2ehq set 3 0
-	ssdk_sh cosmap pri2ehq set 4 1
-	ssdk_sh cosmap pri2ehq set 5 1
-	ssdk_sh cosmap pri2ehq set 6 1
-	ssdk_sh cosmap pri2ehq set 7 1
-}
-
-function create_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-
-	ssdk_sh acl list create 56 48
-	#action bypass eg stp check
-	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
-	if [ "$chip_ver" == "0x2000" ]; then
-		action="$action n n 0"
-	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		action="$action n n n 0"
-	else
-		action="$action 0"
-	fi
-
-	for ruleid in $( seq 0 2 )
-	do
-		if [ "$ruleid" == "0" ];then
-			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
-		elif [ "$ruleid" == "1" ];then
-			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		else
-			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		fi
-		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-			cmd="$cmd n $action"
-		else
-			cmd="$cmd $action"
-		fi
-		#echo $cmd
-		$cmd
-	done
-	ssdk_sh acl list bind 56 0 2 1
-}
-
-function delete_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		ssdk_sh acl list unbind $listid 0 1 $portmap
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule del $listid 0 1"
-				echo $cmd
-				$cmd
-			done
-		done
-		#echo "deleting list $listid"
-		ssdk_sh acl list destroy $listid
-	done
-}
-
-function delete_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 1
-	ssdk_sh cosmap pri2q set 3 1
-	ssdk_sh cosmap pri2q set 4 2
-	ssdk_sh cosmap pri2q set 5 2
-	ssdk_sh cosmap pri2q set 6 3
-	ssdk_sh cosmap pri2q set 7 3
-	ssdk_sh cosmap pri2ehq set 0 1
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 2
-	ssdk_sh cosmap pri2ehq set 3 2
-	ssdk_sh cosmap pri2ehq set 4 3
-	ssdk_sh cosmap pri2ehq set 5 3
-	ssdk_sh cosmap pri2ehq set 6 4
-	ssdk_sh cosmap pri2ehq set 7 5
-}
-
-function delete_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-	ssdk_sh acl list unbind 56 0 2 1
-	ssdk_sh acl rule del 56 0 1
-	ssdk_sh acl rule del 56 1 1
-	ssdk_sh acl rule del 56 2 1
-	ssdk_sh acl list destroy 56
-}
-
-function edma_war_config_add(){
-	create_war_cosmap
-	ssdk_sh acl status set enable
-	create_war_acl_rules
-}
-
-function edma_war_config_del(){
-	delete_war_acl_rules
-	delete_war_cosmap
-}
-
-function ipq50xx_serdes_monitor () {
-	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
-	port_id=2
-	old_linkstatus="DISABLE"
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set 29 0xb 0x300d
-		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-
-		while true
-		do
-			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
-			#when qca808x phy link status is from down to up, serdes tx would be enabled
-			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0xb00d
-				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
-			fi
-			#when qca808x phy link status is from up to down, serdes tx would be disabled
-			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0x300d
-				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-			fi
-			old_linkstatus=$cur_linkstatus
-		done
-	fi
-}
-
-function ipq53xx_phy_amplitude_set () {
-	#for qca808x phy sgmii, set half amplitude with src_half_swing register
-	port_id=2
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd180" ]; then
-		ssdk_sh debug phy set 5 0x40010087 0x208a
-		ssdk_sh debug phy set 6 0x40010087 0x208a
-		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
-		ampl_val=$(eval "ssdk_sh debug phy get 5 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 5 0x40010067 $ampl_val
-		ampl_val=$(eval "ssdk_sh debug phy get 6 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 6 0x40010067 $ampl_val
-	fi
-}
-
-function ipq53xx_uniphy_amplitude_set () {
-	#for ipq50xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
-	ssdk_sh debug uniphy set 0 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 0 0x24 0 4
-	ssdk_sh debug uniphy set 1 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 1 0x24 0 4
-}
-
-ssdk_dependency() {
-	counter=0
-	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
-		insmod qca-ssdk.ko
-	}
-	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
-	do
-		sleep 1
-		counter=$((counter+1))
-	done
-}
-
-start() {
-	ssdk_dependency
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to enable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_add
-		echo ''
-	fi
-	#The following commands should be uncommented to add acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#create_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	#The following commands should be uncommented to enable WAR for ipq50xx
-	chip_type_info=`cat tmp/sysinfo/model`
-	result=$(echo $chip_type_info | grep "IPQ5018")
-	if [ "$result" != "" ]; then
-		#ipq50xx_serdes_monitor &
-		#ipq50xx_uniphy_amplitude_set
-		#ipq50xx_phy_amplitude_set
-		echo ''
-	fi
-	if [ "$chip_ver" = "0x2001" ]; then
-		ipq53xx_uniphy_amplitude_set
-		ipq53xx_phy_amplitude_set
-		echo ''
-	fi
-	echo starting
-}
-
-stop() {
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to disable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_del
-		echo ''
-	fi
-	#The following commands should be uncommented to delete acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#delete_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	echo stoping
-}

feeds/tip/certificates/files/etc/init.d/early_boot

@@ -20,7 +20,6 @@ copy_certificates() {
 	[ -z "$country" ] && country=US
 	echo "options cfg80211 ieee80211_regdom="$country > /etc/modules.conf 
 	echo -n $country > /etc/ucentral/country
-	sync
 	exit 0
 }
 

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -6,16 +6,13 @@ check_certificates() {
 
 check_certificates
 
-tar_part_lookup() {
-	part="$(fw_printenv -n cert_part)"
-	if [ "$part" -eq 0 ]; then
-		echo "$2"
-		part=1
-	else
-		echo "$1"
-		part=0
-	fi
-	fw_setenv cert_part $part
+bootconfig_lookup() {
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG"
+		;;
+	1)	echo "0:BOOTCONFIG1"
+		;;
+	esac
 }
 
 . /lib/functions.sh
@@ -38,39 +35,13 @@ sonicfi,rap7*)
 		[ -n "$mtd" ] && mount -t ext4 /dev/mtdblock$mtd /certificates
 	fi
 	if [ ! -f /certificates/cert.pem ] || [ ! -f /certificates/key.pem ]; then
-		part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-		if [ -n "part" ]; then
-			mmc_dev=$(echo $(find_mmc_part "$part") | sed 's/^.\{5\}//')
+		bootconfig=$(bootconfig_lookup)
+		if [ -n "$bootconfig" ]; then
+			mmc_dev=$(echo $(find_mmc_part "$bootconfig") | sed 's/^.\{5\}//')
 			[ -n "$mmc_dev" ] && tar xf /dev/$mmc_dev -C /certificates
 		fi
 	fi
 	;;
-udaya,a5-id2)
-	mtd=$(find_mtd_index certificates)
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /mnt
-		cp /mnt/* /certificates
-		umount /mnt
-	fi
-	part=$(tar_part_lookup "insta1" "insta2")
-	if [ -n "insta" ]; then
-		mtd=$(find_mtd_index $part)
-		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
-	fi
-	;;
-sonicfi,rap6*)
-	mtd=$(find_mtd_index certificates)
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /mnt
-		cp /mnt/* /certificates
-		umount /mnt
-	fi
-	part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-	if [ -n "$part" ]; then
-		mtd=$(find_mtd_index $part)
-		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
-	fi
-	;;
 *)
 	mtd=$(find_mtd_index certificates)
 

feeds/tip/certificates/files/usr/bin/store_certs

@@ -1,43 +1,25 @@
 #!/bin/sh
 
-tar_part_lookup() {
-	part="$(fw_printenv -n cert_part)"
-	if [ "$part" -eq 0 ]; then
-		echo "$2"
-		part=1
-	else
-		echo "$1"
-		part=0
-	fi
-	fw_setenv cert_part $part
+bootconfig_lookup() {
+	bootconfig="$(fw_printenv -n cert_part)"
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG1"
+		bootconfig=1
+		;;
+	*)	echo "0:BOOTCONFIG"
+		bootconfig=0
+		;;
+	esac
+	fw_setenv cert_part $bootconfig
 }
 
 . /lib/functions.sh
 case "$(board_name)" in
 sonicfi,rap7110c-341x)
 	cd /certificates
-	tar cf /tmp/certs.tar .
-	part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-	mmc_dev=$(echo $(find_mmc_part $part) | sed 's/^.\{5\}//')
-	dd if=/tmp/certs.tar of=/dev/$mmc_dev
-	;;
-udaya,a5-id2)
-	cd /certificates
-	tar cf /tmp/certs.tar .
-	part=$(tar_part_lookup "insta1" "insta2")
-	mtd=$(find_mtd_index $part)
-	dd if=/tmp/certs.tar of=/dev/mtdblock$mtd
-	;;
-sonicfi,rap6*)
-	if [ "$(fw_printenv -n store_certs_disabled)" != "1" ]; then
-		cd /certificates
-		tar cf /tmp/certs.tar .
-		part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
-		mtd=$(find_mtd_index $part)
-		block_size=$(cat /sys/class/mtd/mtd$mtd/size)
-		dd if=/tmp/certs.tar of=/tmp/certs_pad.tar bs=$block_size conv=sync
-		mtd write /tmp/certs_pad.tar /dev/mtd$mtd
-		rm -f /tmp/certs.tar /tmp/certs_pad.tar
-	fi
+	tar cf /tmp/certs.tar
+	bootconfig=$(bootconfig_lookup)
+	mmc_dev=$(echo $(find_mmc_part $bootconfig) | sed 's/^.\{5\}//')
+	dd if=/tmp/certs.tar of=/dev/$bootconfig
 	;;
 esac

feeds/tip/cloud_discovery/files/usr/bin/cloud_discovery

@@ -27,8 +27,6 @@ let timeouts = {
 	'validate': 120,
 	'orphan': 2 * 60 * 60,
 	interval: 10000,
-	expiry_interval: 60 * 60 * 1000,
-	expiry_threshold: 3 * 24 * 60 * 60,
 };
 
 ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "cloud_discover");
@@ -93,7 +91,6 @@ function gateway_write(data) {
 	}
 	if (changed)
 		fs.writefile('/etc/ucentral/gateway.json', new);
-		system('sync');
 	return changed;
 }
 
@@ -331,27 +328,6 @@ let ubus_methods = {
 	},
 };
 
-function expiry_handler() {
-	let stat = fs.stat('/etc/ucentral/operational.ca');
-	if (!stat)
-		return;
-
-	let ret = system(`openssl x509 -checkend ${timeouts.expiry_threshold} -noout -in /certificates/operational.pem`);
-	if (!ret) {
-		ulog(LOG_INFO, 'checked certificate expiry - all ok\n');
-		return;
-	}
-
-	ulog(LOG_INFO, 'certificate will expire soon\n');
-	if (system('/usr/bin/est_client reenroll')) {
-		ulog(LOG_INFO, 'reenroll failed\n');
-		return;
-	}
-	ulog(LOG_INFO, 'reenroll succeeded\n');
-	ulog(LOG_INFO, '(re)starting client\n');
-	system('/etc/init.d/ucentral restart');
-}
-
 if (gateway_available()) {
 	let status = ubus.call('ucentral', 'status');
 	ulog(LOG_INFO, 'cloud is known\n');
@@ -368,7 +344,6 @@ if (gateway_available()) {
 timeouts_load();
 
 interval = uloop.interval(timeouts.interval, interval_handler);
-uloop.interval(timeouts.expiry_interval, expiry_handler);
 
 ubus.publish('cloud', ubus_methods);
 

feeds/ucentral/ratelimit/files/usr/bin/ratelimit

@@ -350,7 +350,7 @@ function run_service() {
 				printf('-> reload\n');
 				let list = uctx.list();
 				for (let obj in list) {
-					if (!wildcard(obj, 'hostapd.wlan*') && !wildcard(obj, 'hostapd.phy*'))
+					if (!wildcard(obj, 'hostapd.wlan*'))
 						continue;
 					let iface = split(obj, '.')[1];
 					let device = get_device(devices, req.args.device);

feeds/ucentral/rrmd/files/etc/init.d/rrmd

@@ -6,8 +6,6 @@ STOP=01
 USE_PROCD=1
 
 start_service() {
-	[ -e "/tmp/rrm_timestamp" ] && rm -rf /tmp/rrm_timestamp
-	[ -e "/tmp/rrm_chan_switch" ] && rm -rf /tmp/rrm_chan_switch
 	rm -rf /tmp/threshold_breach_count*
 	rm -rf /tmp/fixed_channel*
 	rm -rf /tmp/chanutil_phy*

feeds/ucentral/rrmd/files/usr/share/rrmd/policy_chanutil.uc

@@ -24,10 +24,6 @@ function stats_info_write(path, value) {
 	file.close();
 }
 
-function record_rrm_timestamp() {
-    stats_info_write("/tmp/rrm_timestamp", time());
-}
-
 // total number of radios: default=2
 let num_radios = 2;
 let phy_count;
@@ -140,122 +136,20 @@ function channel_to_freq(band, channel) {
     return freq;
 }
 
-// using mapping to get correct center channel, especially for 6G radio
-function get_center_channel(channel, band, bw) {
-    let center_channel = channel;
-    let center_channel_map = {};
+function center_freq_calc(band, freq, bandwidth) {
+    if (bandwidth == 40)
+        return +freq + 10;
+    if (bandwidth == 80)
+        return +freq + 30;
+    if (bandwidth == 160)
+        return +freq + 70;
+    if (bandwidth == 320)
+        if (freq == 6115)
+            return +freq - 10;
+        else
+            return +freq + 150;
 
-    switch (band) {
-    case '5g':
-        if (bw == 40) {
-            center_channel_map = {
-                "36": 38, "40": 38,
-                "44": 46, "48": 46,
-                "52": 54, "56": 54,
-                "60": 62, "64": 62,
-                "100": 102, "104": 102,
-                "108": 110, "112": 110,
-                "116": 118, "120": 118,
-                "124": 126, "128": 126,
-                "132": 134, "136": 134,
-                "140": 142, "144": 142,
-                "149": 151, "153": 151,
-                "157": 159, "161": 159,
-                "165": 167
-            };
-        } else if (bw == 80) {
-            center_channel_map = {
-                "36": 42, "40": 42, "44": 42, "48": 42,
-                "52": 58, "56": 58, "60": 58, "64": 58,
-                "100": 106, "104": 106, "108": 106, "112": 106,
-                "116": 122, "120": 122, "124": 122, "128": 122,
-                "132": 138, "136": 138, "140": 138, "144": 138,
-                "149": 155, "153": 155, "157": 155, "161": 155,
-                "165": 171
-            };
-        } else if (bw == 160) {
-            center_channel_map = {
-                "36": 50, "40": 50, "44": 50, "48": 50,
-                "52": 50, "56": 50, "60": 50, "64": 50,
-                "100": 114, "104": 114, "108": 114, "112": 114,
-                "116": 114, "120": 114, "124": 114, "128": 114
-            };
-        }
-        break;
-    case '6g':
-        if (bw == 40) {
-            center_channel_map = {
-                "1": 3, "5": 3, "9": 11, "13": 11,
-                "17": 19, "21": 19, "25": 27, "29": 27,
-                "33": 35, "37": 35, "41": 43, "45": 43,
-                "49": 51, "53": 51, "57": 59, "61": 59,
-                "65": 67, "69": 67, "73": 75, "77": 75,
-                "81": 83, "85": 83, "89": 91, "93": 91,
-                "97": 99, "101": 99, "105": 107, "109": 107,
-                "113": 115, "117": 115, "121": 123, "125": 123,
-                "129": 131, "133": 131, "137": 139, "141": 139,
-                "145": 147, "149": 147, "153": 155, "157": 155,
-                "161": 163, "165": 163, "169": 171, "173": 171,
-                "177": 179, "181": 179, "185": 187, "189": 187,
-                "193": 195, "197": 195, "201": 203, "205": 203,
-                "209": 211, "213": 211, "217": 219, "221": 219,
-                "225": 227
-            };
-        } else if (bw == 80) {
-            center_channel_map = {
-                "1": 7, "5": 7, "9": 7, "13": 7,
-                "17": 23, "21": 23, "25": 23, "29": 23,
-                "33": 39, "37": 39, "41": 39, "45": 39,
-                "49": 55, "53": 55, "57": 55, "61": 55,
-                "65": 71, "69": 71, "73": 71, "77": 71,
-                "81": 87, "85": 87, "89": 87, "93": 87,
-                "97": 103, "101": 103, "105": 103, "109": 103,
-                "113": 119, "117": 119, "121": 119, "125": 119,
-                "129": 135, "133": 135, "137": 135, "141": 135,
-                "145": 151, "149": 151, "153": 151, "157": 151,
-                "161": 167, "165": 167, "169": 167, "173": 167,
-                "177": 183, "181": 183, "185": 183, "189": 183,
-                "193": 199, "197": 199, "201": 199, "205": 199,
-                "209": 215
-            };
-        } else if (bw == 160) {
-            center_channel_map = {
-                "1": 15, "5": 15, "9": 15, "13": 15,
-                "17": 15, "21": 15, "25": 15, "29": 15,
-                "33": 47, "37": 47, "41": 47, "45": 47,
-                "49": 47, "53": 47, "57": 47, "61": 47,
-                "65": 79, "69": 79, "73": 79, "77": 79,
-                "81": 79, "85": 79, "89": 79, "93": 79,
-                "97": 111, "101": 111, "105": 111, "109": 111,
-                "113": 111, "117": 111, "121": 111, "125": 111,
-                "129": 143, "133": 143, "137": 143, "141": 143,
-                "145": 143, "149": 143, "153": 143, "157": 143,
-                "161": 175, "165": 175, "169": 175, "173": 175,
-                "177": 175, "181": 175, "185": 175, "189": 175,
-                "193": 207
-            };
-        } else if (bw == 320) {
-            center_channel_map = {
-                "1": 31, "5": 31, "9": 31, "13": 31,
-                "17": 31, "21": 31, "25": 31, "29": 31,
-                "33": 63, "37": 63, "41": 63, "45": 63,
-                "49": 63, "53": 63, "57": 63, "61": 63,
-                "65": 63, "69": 63, "73": 63, "77": 63,
-                "81": 63, "85": 63, "89": 63, "93": 63,
-                "97": 127, "101": 127, "105": 127, "109": 127,
-                "113": 127, "117": 127, "121": 127, "125": 127,
-                "129": 127, "133": 127, "137": 127, "141": 127,
-                "145": 127, "149": 127, "153": 127, "157": 127,
-                "161": 191
-            };
-        }
-        break;
-    }
-
-    if (center_channel_map[channel])
-        center_channel = center_channel_map[channel];
-
-    return center_channel;
+    return +freq;
 }
 
 function interface_status_check(iface) {
@@ -307,9 +201,6 @@ function check_current_channel(iface) {
 function hostapd_switch_channel(msg) {
     ulog_info(`[%s] Start switch channel to %d \n`, msg.iface, msg.channel);
 
-    // Channel switch in progress, set flag = 1
-    stats_info_write("/tmp/rrm_chan_switch", 1);
-
     let chan_switch_status = 0;
     let sec_channel_offset = null;
 
@@ -317,8 +208,7 @@ function hostapd_switch_channel(msg) {
     let bandwidth = replace(msg.htmode, /[^0-9]/g, '');
 
     let target_freq = channel_to_freq(msg.band, msg.channel);
-    let center_channel = get_center_channel(msg.channel, msg.band, bandwidth);
-    let center_freq = channel_to_freq(msg.band, center_channel);
+    let center_freq = center_freq_calc(msg.band, target_freq, bandwidth);
     if (bandwidth > 20)
         sec_channel_offset = 1;
 
@@ -355,20 +245,9 @@ function switch_status_check(iface, dfs_enabled_5g_flag) {
         ulog_info(`[%s] 5G radio might need some time to be UP (DFS enabled) \n`, iface);
 
         let p = 0;
-        // Default max 70 seconds wait for the DFS enabled interface to be UP
+        // Max 65 seconds wait for the DFS enabled interface to be UP
         let timer = 70;
 
-        // get real timer from hostapd_cli command
-        let check_cac_time = sprintf('hostapd_cli -i %s status | grep \"cac_time_left_seconds\" | awk -F "=" \'{print $2}\'', iface);
-        let _cac_time = fs.popen(check_cac_time);
-        let cac_time = trim(_cac_time.read('all'));
-        _cac_time.close();
-
-        // if cac_time is a valid number, set timer to cac_time + 5 seconds
-        if (cac_time > 0 && match(cac_time, /^[0-9]+$/)) {
-            timer = int(cac_time) + 5;
-        }
-
         while (p < timer) {
             ulog_info(`[%s] Check#%d \n `, iface, p);
 
@@ -388,9 +267,6 @@ function switch_status_check(iface, dfs_enabled_5g_flag) {
         }
     }
 
-    // Channel switch done, set flag = 0
-    stats_info_write("/tmp/rrm_chan_switch", 0);
-
     let current_chan = check_current_channel(iface);
     return current_chan;
 }
@@ -560,7 +436,7 @@ function random_channel_selection(iface, band, htmode, chan_list_valid) {
     ulog_info(`[%s] Selected channel list from config (default channel list shall be used in case channels haven't been selected) = %s \n`, iface, (chan_list_valid || '[]'));
 
     if (band == '2g' && bw >= 40) {
-        ulog_info(`[%s] It is highly recommended to NOT use %dMHz bandwidth for 2.4G radio (RRM will not work properly) \n`, iface, bw);
+        ulog_info(`[%s] It is highly recommended to NOT use %dMHz bandwidth for 2.4G radio \n`, iface, bw);
     } else if (band == '5g' && bw > 160) {
         ulog_info(`[%s] %dMHz bandwidth not supported for 5G radio. Please use a bandwidth of 160MHz or lower\n`, iface, bw);
     }
@@ -692,28 +568,9 @@ function random_channel_selection(iface, band, htmode, chan_list_valid) {
     return random_channel;
 }
 
-function check_center_channel(chosen_random_channel, current_channel, band, htmode) {
-    let ret = false;
-    let bw = replace(htmode, /[^0-9]/g, '');
-
-    if (band != '2g' || bw != 20) {
-        // for 2G band or 20MHz bandwidth, center channel is the same as the channel
-        let chosen_random_channel_center = get_center_channel(chosen_random_channel, band, bw);
-        let current_channel_center = get_center_channel(current_channel, band, bw);
-
-        ulog_info(`Center channel of the chosen random channel (%d) = %d; Center channel of the current channel (%d) = %d \n`, chosen_random_channel, chosen_random_channel_center, current_channel, current_channel_center);
-
-        if (chosen_random_channel_center == current_channel_center)
-            ret = true;
-    }
-
-    return ret;
-}
-
 function algo_rcs(iface, current_channel, band, htmode, selected_channels) {
     let chosen_random_channel = 0;
     let res = 0;
-    let same_center_channel = false;
 
     // random_channel_selection script will help to select random channel
     chosen_random_channel = random_channel_selection(iface, band, htmode, selected_channels);
@@ -723,15 +580,8 @@ function algo_rcs(iface, current_channel, band, htmode, selected_channels) {
         ulog_info(`[%s] RCS assigned the same channel = %d; Skip channel switch \n`, iface, chosen_random_channel);
         res = 0;
     } else if (chosen_random_channel > 0) {
-        // check if the random channel has the same center channel as the current channel
-        same_center_channel = check_center_channel(chosen_random_channel, current_channel, band, htmode);
-        if (same_center_channel) {
-            ulog_info(`[%s] RCS found channel %d with the same center channel as current channel %d; Skip channel switch \n`, iface, chosen_random_channel, current_channel);
-            res = 0;
-        } else {
-            ulog_info(`[%s] RCS done ... random channel found = %d\n`, iface, chosen_random_channel);
-            res = 1;
-        }
+        ulog_info(`[%s] RCS done ... random channel found = %d\n`, iface, chosen_random_channel);
+        res = 1;
     } else {
         ulog_info(`[%s] RCS scan FAIL. Retry Channel optimization at next cycle \n`, iface);
         res = 0;
@@ -761,8 +611,6 @@ function channel_optimize() {
         return config.interval;
     }
 
-    record_rrm_timestamp();
-
     let current_rf_down = {};
 	let cool_down_f = {};
     let check_all_cool_down = 0;
@@ -1076,7 +924,7 @@ function channel_optimize() {
                             }
                         } else {
                             // revert back to the original channel
-                            ulog_info(`[%s] Channel %d may have a cac_time longer than 60 seconds, RRM failed for this interval (you might want to avoid selecting this channel) \n`, radio_iface[l], init_payload.channel);
+                            ulog_info(`[%s] Channel %d has a cac_time longer than 60 seconds, RRM failed for this interval (you might want to avoid selecting this channel) \n`, radio_iface[l], init_payload.channel);
                         }
                     } else if (selected_algo == "ACS") {
                         let random_wait_time = random_time_calc();
@@ -1092,9 +940,6 @@ function channel_optimize() {
                             check_all_threshold_breach >= 1: threshold breach count exceeded for one or more interfaces
                         */
 
-                        // Channel switch in progress, set flag = 1
-                        stats_info_write("/tmp/rrm_chan_switch", 1);
-
                         // flag to check if 5G radio was restarted
                         let radio_5g_restarted = 0;
 
@@ -1158,10 +1003,6 @@ function channel_optimize() {
                             sleep(30000);
                         }
                     }
-
-                    sleep(5000);
-                    // Channel switch done, set flag = 0
-                    stats_info_write("/tmp/rrm_chan_switch", 0);
                 } else {
                     if (threshold_breach_f[l] != 1) {
                         ulog_info(`[%s] Threshold breach count (=%d) < Allowed consecutive Channel Utilization threshold breach count (=%d), will be checked again in the next interval \n`, radio_iface[l], threshold_breach_count[l], config.consecutive_threshold_breach);
@@ -1175,7 +1016,6 @@ function channel_optimize() {
         }
     }
     ulog_info(`RRM with channel optimization finished; next RRM round starts in %d seconds \n`, config.interval/1000);
-    record_rrm_timestamp();
 
     return config.interval;
 }

feeds/ucentral/rtty/files/rtty.init

@@ -51,7 +51,7 @@ start_rtty() {
 	procd_set_param command $BIN -h $host -I "$id" -a
 	[ -n "$port" ] && procd_append_param command -p "$port"
 	[ -n "$description" ] && procd_append_param command -d "$description"
-	[ "$ssl" = "1" ] && procd_append_param command -s -c /etc/ucentral/opertional.pem -k /etc/ucentral/key.pem
+	[ "$ssl" = "1" ] && procd_append_param command -s -c /etc/ucentral/cert.pem -k /etc/ucentral/key.pem
 	[ -n "$token" ] && procd_append_param command -t "$token"
 	[ "$verbose" = "1" ] && procd_append_param command -v
 	[ "$timeout" -eq "0" ] || procd_append_param command -e $timeout

feeds/ucentral/ucentral-client/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=34c912efa9c0dcdbc6122296e236993484b24b3bc4de51608356304afc8df1c3
+PKG_MIRROR_HASH:=2e28e0aa61b74851c7daf3634ec34d303a603e881e6c5d1fd76c837dea527582
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-07-27
-PKG_SOURCE_VERSION:=c536f6957bd96e57301f9d540b75460119d2a69a
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=69829f63ea172ce9bd19b7b02073746fe9cf6a52
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-client/files/etc/config/ucentral

@@ -6,9 +6,9 @@ config ucentral config
 	option reporting	10
 
 config timeouts timeouts
-	option offline		14400
+	option offline		120
 	option validate		120
-	option orphan		7200
+	option orphan		120
 
 #config event
 #	option type  dhcp

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=45575f1f345368d109f74dc5ae3c8648dadbebef37e2d8eadc95b4fca2fbf43f
+PKG_MIRROR_HASH:=1ad9f7b5d5d1145e3aed14937eef60d6794d821e0244cc8fa824400d3da47f5a
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-07-30
-PKG_SOURCE_VERSION:=30c73745c104d56f58d4f457956fe7ebac6e0f86
+PKG_SOURCE_DATE:=2025-07-11
+PKG_SOURCE_VERSION:=5276d0b8b6e83ab57354b0bcbb820de83a91ab88
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-state/files/ucentral-state

@@ -22,65 +22,7 @@ let current_state;
 let online = false;
 
 function self_healing() {
-	let heal_wifi = false;
-	let health_stat = json(fs.readfile('/tmp/ucentral.health'));
-	let last_nw_restart_ts = int(fs.readfile('/tmp/ucentral.nw_restart_ts')) || 0;
-	let time_passed_since_nw_restart = time() - last_nw_restart_ts;
 
-	if (health_stat) {
-		if (health_stat.data.rrm_chanutil == false) {
-			// RRM with Channel utilization abnormal, restart rrmd
-			ulog(LOG_INFO, 'RRM with Channel utilization abnormal, restarting rrmd\n');
-			system('/etc/init.d/rrmd restart');
-		}
-
-		if (health_stat.sanity != 100) {
-			for (let iface in health_stat.data.interfaces) {
-				let iface_data = health_stat.data.interfaces[iface];
-				if (iface_data.ssids) {
-					// one of the VAPs have an issue: flag up!
-					heal_wifi = true;
-					ulog(LOG_INFO, 'Time passed since last network restart = %d seconds\n', time_passed_since_nw_restart);
-					break;
-				}
-			}
-		} else {
-			// all VAPs are healthy, no need to heal anything
-			return;
-		}
-	}
-
-	if (fs.stat('/tmp/rrm_timestamp')) {
-		let rrm_chan_switch_flag = int(fs.readfile('/tmp/rrm_chan_switch')) || 0;
-		let last_rrm_timestamp = int(fs.readfile('/tmp/rrm_timestamp'));
-		let time_passed_since_rrm = time() - last_rrm_timestamp;
-
-		if (rrm_chan_switch_flag == 1) {
-			// RRM chan switch in progress, do not restart network!
-			ulog(LOG_INFO, 'RRM channel switch in progress, cannot restart network \n');
-			heal_wifi = false;
-		}
-
-		if (time_passed_since_rrm < 180) {
-			// RRM in progress, do not restart network!
-			ulog(LOG_INFO, 'RRM with Channel utilization may still be in progress, cannot restart network \n');
-			heal_wifi = false;
-		}
-	}
-
-	// keep a gap of at least 5 minutes between network restarts
-	if (heal_wifi && time_passed_since_nw_restart > 300) {
-		ulog(LOG_INFO, 'Restarting network \n');
-		// update network restart timestamp
-		let f = fs.open("/tmp/ucentral.nw_restart_ts", "w");
-		if (f) {
-			f.write(time());
-			f.close();
-		}
-
-		// restart network
-		system('/etc/init.d/network restart');
-	}
 }
 
 let healthcheck;
@@ -100,7 +42,7 @@ healthcheck = {
 	},
 
 	spawn: function() {
-		ulog(LOG_INFO, 'healthcheck execute\n');
+		ulog(LOG_INFO, 'healtcheck execute\n');
 		healthcheck.pid = uloop.process('/usr/share/ucentral/health.uc', [], {}, healthcheck.complete);
 	},
 };
@@ -265,7 +207,7 @@ let ubus_methods = {
 			current_state = req.args.state;
 			blink_timeout();
 			ulog(LOG_INFO, 'set state -> ' + req.args.state + '\n');
-
+			
 			return state_handler[req.args.state](req.args);
 		},
 		args: {

patches/0090-netifd-add-gcmp-256-on-6GHz.patch

@@ -1,68 +0,0 @@
-From a2a7cdf9e292bac5b146738276a593d8e119fe8f Mon Sep 17 00:00:00 2001
-From: Marek Kwaczynski <marek@shasta.cloud>
-Date: Thu, 3 Jul 2025 15:55:43 +0000
-Subject: [PATCH] netifd: add gcmp-256 as a cipher suite when SAE is enabled on
- HE/EHT
-
-Enabling gcmp-256 only on 6GHz radio.
-
-Fixes: WIFI-14594
-
-Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>
----
- .../config/netifd/patches/200-gcmp-256.patch  | 43 +++++++++++++++++++
- 1 file changed, 43 insertions(+)
- create mode 100644 package/network/config/netifd/patches/200-gcmp-256.patch
-
-diff --git a/package/network/config/netifd/patches/200-gcmp-256.patch b/package/network/config/netifd/patches/200-gcmp-256.patch
-new file mode 100644
-index 0000000000..7ac6262e7f
---- /dev/null
-+++ b/package/network/config/netifd/patches/200-gcmp-256.patch
-@@ -0,0 +1,43 @@
-+Index: netifd-2023-09-19-8587c074/scripts/netifd-wireless.sh
-+===================================================================
-+--- netifd-2023-09-19-8587c074.orig/scripts/netifd-wireless.sh
-++++ netifd-2023-09-19-8587c074/scripts/netifd-wireless.sh
-+@@ -39,11 +39,10 @@ prepare_key_wep() {
-+ }
-+ 
-+ _wdev_prepare_channel() {
-+-	json_get_vars channel band hwmode
-++	json_get_vars channel band hwmode htmode
-+ 
-+ 	auto_channel=0
-+ 	enable_ht=0
-+-	htmode=
-+ 	hwmode="${hwmode##11}"
-+ 
-+ 	case "$channel" in
-+@@ -70,7 +69,14 @@ _wdev_prepare_channel() {
-+ 
-+ 	case "$band" in
-+ 		2g) hwmode=g;;
-+-		5g|6g) hwmode=a;;
-++		5g) hwmode=a;;
-++		6g)
-++			hwmode=a;
-++			case "$htmode" in
-++				HE*|EHT*) wpa3_cipher="GCMP-256 ";;
-++				*) wpa3_cipher="";;
-++			esac
-++		;;
-+ 		60g) hwmode=ad;;
-+ 		*)
-+ 			case "$hwmode" in
-+@@ -216,6 +222,9 @@ wireless_vif_parse_encryption() {
-+ 		wpa_cipher="GCMP"
-+ 	else
-+ 		wpa_cipher="CCMP"
-++		case "$encryption" in
-++			sae*|wpa3*|psk3*|owe) wpa_cipher="${wpa3_cipher}$wpa_cipher";;
-++		esac
-+ 	fi
-+ 
-+ 	case "$encryption" in
--- 
-2.43.0
-

patches/0095-feeds.default.conf-switch-to-using-git-instead-of-ht.patch

@@ -0,0 +1,27 @@
+From 0f590999ea33fb91160aec123a9a74c31623584e Mon Sep 17 00:00:00 2001
+From: Paul White <paul@shasta.cloud>
+Date: Mon, 21 Jul 2025 22:41:52 +0000
+Subject: [PATCH] feeds.default.conf: switch to using git:// instead of
+ https://
+
+Signed-off-by: Paul White <paul@shasta.cloud>
+---
+ feeds.conf.default | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/feeds.conf.default b/feeds.conf.default
+index d467db5627..bafcf8aa98 100644
+--- a/feeds.conf.default
++++ b/feeds.conf.default
+@@ -1,4 +1,4 @@
+-src-git packages https://git.openwrt.org/feed/packages.git;openwrt-23.05
+-src-git luci https://git.openwrt.org/project/luci.git;openwrt-23.05
+-src-git routing https://git.openwrt.org/feed/routing.git;openwrt-23.05
+-src-git telephony https://git.openwrt.org/feed/telephony.git;openwrt-23.05
++src-git packages git://git.openwrt.org/feed/packages.git;openwrt-23.05
++src-git luci git://git.openwrt.org/project/luci.git;openwrt-23.05
++src-git routing git://git.openwrt.org/feed/routing.git;openwrt-23.05
++src-git telephony git://git.openwrt.org/feed/telephony.git;openwrt-23.05
+-- 
+2.43.0
+

patches/0095-toolchain-use-older-gcc11-for-legacy-targets.patch

@@ -1,37 +0,0 @@
-From 0b83834085bf536183b0683f4f86800dbe1e2d39 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 28 Jul 2025 07:49:07 +0200
-Subject: [PATCH] toolchain: use older gcc11 for legacy targets
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- toolchain/binutils/Config.version | 1 +
- toolchain/gcc/Config.version      | 1 +
- 2 files changed, 2 insertions(+)
-
-diff --git a/toolchain/binutils/Config.version b/toolchain/binutils/Config.version
-index c9f8584480..5393d389a5 100644
---- a/toolchain/binutils/Config.version
-+++ b/toolchain/binutils/Config.version
-@@ -1,6 +1,7 @@
- 
- config BINUTILS_VERSION_2_37
- 	bool
-+	default y if TARGET_ipq40xx
- 
- config BINUTILS_VERSION_2_38
- 	bool
-diff --git a/toolchain/gcc/Config.version b/toolchain/gcc/Config.version
-index 7126a0c883..b7de3d00e3 100644
---- a/toolchain/gcc/Config.version
-+++ b/toolchain/gcc/Config.version
-@@ -1,5 +1,6 @@
- config GCC_VERSION_11
- 	default y if GCC_USE_VERSION_11
-+	default y if TARGET_ipq40xx
- 	bool
- 
- config GCC_VERSION_13
--- 
-2.34.1
-

patches/0096-uboot-envtools-add-udaya-id5.patch

@@ -1,25 +0,0 @@
-From d366477af72e725524b47f2fffe8a8c1d500060d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 31 Jul 2025 14:45:12 +0200
-Subject: [PATCH] uboot-envtools: add udaya-id5
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- package/boot/uboot-envtools/files/ipq40xx | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx
-index 8d993fae36..78299195bd 100644
---- a/package/boot/uboot-envtools/files/ipq40xx
-+++ b/package/boot/uboot-envtools/files/ipq40xx
-@@ -42,6 +42,7 @@ luma,wrtq-329acn|\
- netgear,wac510|\
- openmesh,a42|\
- openmesh,a62|\
-+udaya,a5-id2|\
- pakedge,wr-1|\
- plasmacloud,pa1200|\
- plasmacloud,pa2200)
--- 
-2.34.1
-

profiles/edgecore_spw2ac1200.yml

@@ -1,12 +0,0 @@
----
-profile: edgecore_spw2ac1200
-target: ipq40xx
-subtarget: generic
-description: Build image for the Edgecore spw2ac1200
-image: bin/targets/ipq40xx/generic/openwrt-ipq40xx-generic-edgecore_spw2ac1200-squashfs-nand-sysupgrade.bin
-packages:
-  - ipq40xx
-include:
-  - ucentral-ap
-  - hostapd
-  - target-ipq40xx

profiles/emplus_wap7635.yml

@@ -1,22 +0,0 @@
----
-profile: emplus_wap7635
-target: ipq53xx
-subtarget: generic
-description: Build image for the EMPLUS WAP7635
-image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-emplus_wap7635-squashfs-sysupgrade.tar
-feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-include:
-  - ucentral-ap
-packages:
-  - ipq53xx
-  - qca-ssdk-shell
-  - iperf3
-  - jq
-  - sysstat
-  - tree
-diffconfig: |
-  CONFIG_KERNEL_IPQ_MEM_PROFILE=0
-  CONFIG_BUSYBOX_CUSTOM=y
-  CONFIG_BUSYBOX_CONFIG_PSTREE=y

profiles/hfcl_ion4.yml

@@ -1,12 +0,0 @@
----
-profile: hfcl_ion4
-target: ipq40xx
-subtarget: generic
-description: Build image for the HFCL ION4
-image: bin/targets/ipq40xx/generic/openwrt-ipq40xx-generic-hfcl_ion4-squashfs-nand-sysupgrade.bin
-packages:
-  - ipq40xx
-include:
-  - ucentral-ap
-  - hostapd
-  - target-ipq40xx