feeds.default.conf: switch to using git:// instead of https://

Signed-off-by: Paul White <paul@shasta.cloud>

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -24,6 +24,8 @@ endef
 #
 
 ALLWIFIBOARDS:= \
+	cig-wf186w \
+	cig-wf186h \
 	cig-wf660a \
 	cig-wf194c \
 	cig-wf194c4 \
@@ -47,8 +49,6 @@ ALLWIFIBOARDS:= \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
 	indio-um-510axm-v1 \
-	indio-um-325ax-v2 \
-	indio-um-525axp \
 	muxi-ap3220l \
 	plasmacloud-pax1800 \
 	wallys-dr5018 \
@@ -108,16 +108,6 @@ $(call Package/ath11k-wifi-default)
     TITLE:=cig-wf196 bdf
 endef
 
-define Package/ath11k-wifi-cig-wf186w
-$(call Package/ath11k-wifi-default)
-    TITLE:=cig-wf186w bdf
-endef
-
-define Package/ath11k-wifi-cig-wf186h
-$(call Package/ath11k-wifi-default)
-    TITLE:=cig-wf186h bdf
-endef
-
 define Package/ath11k-wifi-gl-ax1800
 $(call Package/ath11k-wifi-default)
     TITLE:=gl-ax1800 bdf
@@ -294,24 +284,6 @@ define Package/ath11k-wifi-cig-wf196/install
 	$(INSTALL_DATA) ./board-cig-wf196-us.bin.IPQ8074 $(1)/lib/firmware/ath11k/IPQ8074/hw2.0/board.bin.US
 endef
 
-define Package/ath11k-wifi-cig-wf186w/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
-	$(INSTALL_DATA) ./board-cig-wf186w-us.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186w-ca.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA
-	$(INSTALL_DATA) ./board-cig-wf186w-us.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186w-ca.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA
-endef
-
-define Package/ath11k-wifi-cig-wf186h/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
-	$(INSTALL_DATA) ./board-cig-wf186h-us.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186h-ca.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA
-	$(INSTALL_DATA) ./board-cig-wf186h-us.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US
-	$(INSTALL_DATA) ./board-cig-wf186h-ca.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA
-endef
-
 define Package/ath11k-wifi-optimcloud-d50/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/QCN9074/hw1.0/
@@ -421,6 +393,8 @@ define Package/ath11k-wifi-cig-wf188n/install
 	$(INSTALL_DATA) ./board-cig-wf188n-us.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board.bin.US
 endef
 
+$(eval $(call generate-ath11k-wifi-package,cig-wf186w,Cigtech WF186w))
+$(eval $(call generate-ath11k-wifi-package,cig-wf186h,Cigtech WF186h))
 $(eval $(call generate-ath11k-wifi-package,cig-wf660a,Cigtech WF660a))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
@@ -443,8 +417,6 @@ $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1))
-$(eval $(call generate-ath11k-wifi-package,indio-um-325ax-v2,Indio UM-325AX V2))
-$(eval $(call generate-ath11k-wifi-package,indio-um-525axp,Indio UM-525AXP))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
@@ -468,8 +440,6 @@ $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq8074))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq6018))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-qcn9000))
 $(eval $(call BuildPackage,ath11k-wifi-cig-wf196))
-$(eval $(call BuildPackage,ath11k-wifi-cig-wf186w))
-$(eval $(call BuildPackage,ath11k-wifi-cig-wf186h))
 $(eval $(call BuildPackage,ath11k-wifi-motorola-q14))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d50))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d60))

feeds/ipq807x_v5.4/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude || 0;
-let longitude = gps_info.longitude || 0;
+let latitude = gps_info.latitude ?? 0;
+let longitude = gps_info.longitude ?? 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation || 0;
+afc_location.height = gps_info.elevation ?? 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = int(gps_info.major_axis) || 1;
-afc_location.minor_axis = int(gps_info.minor_axis) || 1;
-afc_location.orientation = gps_info.major_orientation || 0;
-afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
+afc_location.major_axis = gps_info.major_axis ?? 0;
+afc_location.minor_axis = gps_info.minor_axis ?? 0;
+afc_location.orientation = gps_info.major_orientation ?? 0;
+afc_location.vertical_tolerance = gps_info.vdop ?? 0;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/ipq807x_v5.4/hostapd/files/hostapd.uc

@@ -1,8 +1,7 @@
 let libubus = require("ubus");
-import { open, readfile, writefile } from "fs";
+import { open, readfile } from "fs";
 import { wdev_create, wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open } from "common";
 
-let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -894,24 +893,10 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let wireless_config = uci.get_all('wireless');
-		for (let l, afc_server in wireless_config) {
-			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
-				hostapd.printf(`Sending AFC request: ${data}`);
-				writefile("/tmp/afc-request.json", data);
-
-				if (afc_server.access_token)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-				else if (afc_server.cert)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-
-				let afc_response = (readfile("/tmp/afc-response.json"));
-				if (afc_response)
-					return afc_response;
-				else
-					return;
-			}
-		}
+		let ret = ubus.call("afc", "request", { data });
+		if (type(ret) != "object")
+			return;
+		return ret.data;
 	},
 	bss_add: function(name, obj) {
 		bss_event("add", name);

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -16,13 +16,6 @@ edgecore,eap104)
 	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
         ucidef_set_led_default "power" "POWER" "green:power" "on"
 	;;
-indio,um-325ax-v2|\
-indio,um-525axp)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
-	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
-        ucidef_set_led_default "power" "POWER" "green:power" "on"
-	;;
 cig,wf186h|\
 cig,wf186w)
         ucidef_set_led_default "power" "POWER" "green:status" "on"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -48,13 +48,6 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	indio,um-325ax-v2|\
-	indio,um-525axp)
-		ucidef_set_interface_wan "eth1"
-		ucidef_set_interface_lan "eth0"
-		ucidef_add_switch "switch1" \
-			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
 	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -142,8 +142,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
-	indio,um-325ax-v2|\
-	indio,um-525axp|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -185,8 +183,6 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	;;
 ath11k/qcn6122/hw1.0/caldata_2.bin)
 	case "$board" in
-	indio,um-325ax-v2|\
-	indio,um-525axp|\
 	wallys,dr5018|\
 	edgecore,eap104|\
 	edgecore,oap101-6e|\
@@ -238,8 +234,6 @@ ath11k-macs)
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e-6e|\
-	indio,um-325ax-v2|\
-	indio,um-525axp|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -257,32 +251,6 @@ ath11k-macs)
 		;;
 	esac
 	;;
-ath11k/IPQ5018/hw1.0/board.bin)
-	case "$board" in
-	cig,wf186w|\
-	cig,wf186h)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
-                else
-                        ln -s /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
-                fi
-                ;;
-	esac
-	;;
-ath11k/qcn6122/hw1.0/board.bin)
-	case "$board" in
-	cig,wf186w|\
-	cig,wf186h)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA /lib/firmware/ath11k/qcn6122/hw1.0/board.bin
-                else
-                        ln -s /lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US /lib/firmware/ath11k/qcn6122/hw1.0/board.bin
-                fi
-                ;;
-	esac
-	;;
 *)
 	exit 1
 	;;

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -81,8 +81,6 @@ platform_check_image() {
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
-	indio,um-325ax-v2|\
-	indio,um-525axp|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -109,44 +107,29 @@ platform_do_upgrade() {
 
 	board=$(board_name)
 	case $board in
-	indio,um-325ax-v2|\
-	indio,um-525axp|\
+	glinet,b3000|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
 	edgecore,eap104)
-		if [ "$(find_mtd_chardev rootfs)" ]; then
-			CI_UBIPART="rootfs"
-		else
-			if grep -q rootfs1 /proc/cmdline; then
-				CI_UBIPART="rootfs2"
-				CI_FWSETENV="active 2"
-			else
-				CI_UBIPART="rootfs1"
-				CI_FWSETENV="active 1"
-			fi
-		fi
-		nand_upgrade_tar "$1"
-		;;
-	glinet,b3000)
 		CI_UBIPART="rootfs1"
 		[ "$(find_mtd_chardev rootfs)" ] && CI_UBIPART="rootfs"
 		nand_upgrade_tar "$1"
 		;;
-	hfcl,ion4x_w|\
+        hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
-		wp_part=$(fw_printenv primary | cut  -d = -f2)
-		echo "Current Primary is $wp_part"
-		if [[ $wp_part == 1 ]]; then
-				CI_UBIPART="rootfs"
-				CI_FWSETENV="primary 0"
-		else
-				CI_UBIPART="rootfs_1"
-				CI_FWSETENV="primary 1"
-		fi
-		nand_upgrade_tar "$1"
-		;;
+                wp_part=$(fw_printenv primary | cut  -d = -f2)
+                echo "Current Primary is $wp_part"
+                if [[ $wp_part == 1 ]]; then
+                        CI_UBIPART="rootfs"
+                        CI_FWSETENV="primary 0"
+                else
+                        CI_UBIPART="rootfs_1"
+                        CI_FWSETENV="primary 1"
+                fi
+                nand_upgrade_tar "$1"
+                ;;
 	cig,wf186w|\
 	cig,wf186h|\
 	emplus,wap385c|\

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-325ax-v2.dts

@@ -1,941 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Indio UM-325AX V2";
-	compatible = "indio,um-325ax-v2", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-                //led-failsafe = &led_red;
-                //led-running = &led_green;
-                //led-upgrade = &led_green;
-                //led-gateway = &led_blue;
-                //led-factory = &led_blue;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		bootargs-append = " swiotlb=1";
-	#else
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	#endif
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E400000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F400000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4500000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
-			no-map;
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
-			no-map;
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-		};
-		
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          14MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D400000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D600000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4ED00000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4FD00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4FE00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4FF00000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x5400000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xE00000>;
-		};
-
-		m3_dump: m3_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D400000 {
-			no-map;
-			reg = <0x0 0x4D400000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
-			no-map;
-			reg = <0x0 0x4D600000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
-			no-map;
-			reg = <0x0 0x4E600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
-			no-map;
-			reg = <0x0 0x4E700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
-			no-map;
-			reg = <0x0 0x4E800000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4ED00000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
-			no-map;
-			reg = <0x0 0x4FD00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
-			no-map;
-			reg = <0x0 0x4FE00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
-			no-map;
-			reg = <0x0 0x4FF00000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-		gpio-watchdog {
-			compatible = "linux,wdt-gpio";
-			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-			hw_algo = "toggle";
-			hw_margin_ms = <5000>;
-			always-running;
-		};
-
-		serial@78af000 {
-			status = "ok";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <28>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x1c>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-				ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <0x28>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x1e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80        /* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e        /* PORT0_STATUS */
-						0x00094 0x4e        /* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <28>;
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		qcom,test@0 {
-			status = "ok";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm: pcm@0xA3C0000{
-			pinctrl-0 = <&audio_pins>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio22", "gpio24", "gpio23", "gpio25";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_0 {
-			pins = "gpio7";
-			function = "qspi0";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_1 {
-			pins = "gpio6";
-			function = "qspi1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_2 {
-			pins = "gpio5";
-			function = "qspi2";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_3 {
-			pins = "gpio4";
-			function = "qspi3";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-audio_pins: audio_pinmux {
-};
-        leds_pins: leds_pins {
-                led_5g {
-                        pins = "gpio34";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-                led_2g {
-                        pins = "gpio33";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-                led_sys {
-                        pins = "gpio26";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-		led_onekey {
-                        pins = "gpio28";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-        };
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-        leds {
-                compatible = "gpio-leds";
-                pinctrl-0 = <&leds_pins>;
-                pinctrl-names = "default";
-
-                led_blue: led@34 {
-                        label = "led_5g";
-                        gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_5g";
-                        default-state = "off";
-                };
-                led_green: led@33 {
-                        label = "led_2g";
-                        gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_2g";
-                        default-state = "off";
-                };
-                led_red: led@26 {
-                        label = "led_sys";
-                        gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_sys";
-                        default-state = "off";
-                };
-		led@28 {
-                        label = "led_onekey";
-                        gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_onekey";
-                        default-state = "off";
-                };
-        };
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x50>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "disabled";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0xb0>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	status = "ok";
-};
-
-
-&usb3 {
-	status = "ok";
-	device-power-gpio = <&tlmm 24 1>;
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	#status = "disabled";
-	#perst-gpio = <&tlmm 18 1>;
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	#status = "disabled";
-	#perst-gpio = <&tlmm 15 1>;
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-        status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-        status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};
-

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-525axp.dts

@@ -1,941 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Indio UM-525AXP";
-	compatible = "indio,um-525axp", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-                //led-failsafe = &led_red;
-                //led-running = &led_green;
-                //led-upgrade = &led_green;
-                //led-gateway = &led_blue;
-                //led-factory = &led_blue;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		bootargs-append = " swiotlb=1";
-	#else
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	#endif
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E400000  |          15MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F400000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4500000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0xF00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
-			no-map;
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
-			no-map;
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-		};
-		
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          14MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D400000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D600000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4ED00000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4FD00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4FE00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4FF00000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x5400000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xE00000>;
-		};
-
-		m3_dump: m3_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D400000 {
-			no-map;
-			reg = <0x0 0x4D400000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
-			no-map;
-			reg = <0x0 0x4D600000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
-			no-map;
-			reg = <0x0 0x4E600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
-			no-map;
-			reg = <0x0 0x4E700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
-			no-map;
-			reg = <0x0 0x4E800000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4ED00000 0x0 0x1000000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
-			no-map;
-			reg = <0x0 0x4FD00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
-			no-map;
-			reg = <0x0 0x4FE00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
-			no-map;
-			reg = <0x0 0x4FF00000 0x0 0x500000>;
-		};
-
-	#endif
-	};
-
-	soc {
-		gpio-watchdog {
-			compatible = "linux,wdt-gpio";
-			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-			hw_algo = "toggle";
-			hw_margin_ms = <5000>;
-			always-running;
-		};
-
-		serial@78af000 {
-			status = "ok";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <28>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x1c>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-				ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <0x28>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x1e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80        /* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e        /* PORT0_STATUS */
-						0x00094 0x4e        /* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <28>;
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		qcom,test@0 {
-			status = "ok";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm: pcm@0xA3C0000{
-			pinctrl-0 = <&audio_pins>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio22", "gpio24", "gpio23", "gpio25";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_0 {
-			pins = "gpio7";
-			function = "qspi0";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_1 {
-			pins = "gpio6";
-			function = "qspi1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_2 {
-			pins = "gpio5";
-			function = "qspi2";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		qspi_data_3 {
-			pins = "gpio4";
-			function = "qspi3";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-audio_pins: audio_pinmux {
-};
-        leds_pins: leds_pins {
-                led_5g {
-                        pins = "gpio34";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-                led_2g {
-                        pins = "gpio33";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-                led_sys {
-                        pins = "gpio26";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-		led_onekey {
-                        pins = "gpio28";
-                        function = "gpio";
-                        drive-strength = <8>;
-                        bias-pull-down;
-                };
-        };
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-        leds {
-                compatible = "gpio-leds";
-                pinctrl-0 = <&leds_pins>;
-                pinctrl-names = "default";
-
-                led_blue: led@34 {
-                        label = "led_5g";
-                        gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_5g";
-                        default-state = "off";
-                };
-                led_green: led@33 {
-                        label = "led_2g";
-                        gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_2g";
-                        default-state = "off";
-                };
-                led_red: led@26 {
-                        label = "led_sys";
-                        gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_sys";
-                        default-state = "off";
-                };
-		led@28 {
-                        label = "led_onekey";
-                        gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
-                        linux,default-trigger = "led_onekey";
-                        default-state = "off";
-                };
-        };
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x50>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "disabled";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0xb0>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	status = "ok";
-};
-
-
-&usb3 {
-	status = "ok";
-	device-power-gpio = <&tlmm 24 1>;
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	#status = "disabled";
-	#perst-gpio = <&tlmm 18 1>;
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	#status = "disabled";
-	#perst-gpio = <&tlmm 15 1>;
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-        status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-        status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};
-

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630c-311g.dts

@@ -151,14 +151,6 @@
 			no-map;
 			reg = <0x0 0x4F000000 0x0 0x100000>;
 		};
-
-		ramoops: ramoops@4f100000 {
-			compatible = "ramoops";
-			reg = <0x0 0x4f100000 0x0 0x80000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
 	#else
 	/*                 512MB/1GB Profiles
 	 * +==========+==============+=========================+
@@ -293,13 +285,6 @@
 			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
-		ramoops: ramoops@4fd00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x4fd00000 0x0 0x80000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
 	#endif
 	};
 

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-311g.dts

@@ -151,14 +151,6 @@
 			no-map;
 			reg = <0x0 0x4F000000 0x0 0x100000>;
 		};
-
-		ramoops: ramoops@4f100000 {
-			compatible = "ramoops";
-			reg = <0x0 0x4f100000 0x0 0x80000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
 	#else
 	/*                 512MB/1GB Profiles
 	 * +==========+==============+=========================+
@@ -293,13 +285,6 @@
 			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
-		ramoops: ramoops@4fd00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x4fd00000 0x0 0x80000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
 	#endif
 	};
 

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-312g.dts

@@ -154,14 +154,6 @@
 			no-map;
 			reg = <0x0 0x4F000000 0x0 0x100000>;
 		};
-
-		ramoops: ramoops@4f100000 {
-			compatible = "ramoops";
-			reg = <0x0 0x4f100000 0x0 0x80000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
 	#else
 	/*		 512MB/1GB Profiles
 	 * +==========+==============+=========================+
@@ -296,13 +288,6 @@
 			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
-		ramoops: ramoops@4fd00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x4fd00000 0x0 0x80000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
 	#endif
 	};
 

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -93,24 +93,6 @@ define Device/edgecore_eap104
 endef
 TARGET_DEVICES += edgecore_eap104
 
-define Device/indio_um-325ax-v2
-  DEVICE_TITLE := Indio UM-325ax-V2
-  DEVICE_DTS := qcom-ipq5018-indio-um-325ax-v2
-  SUPPORTED_DEVICES := indio,um-325ax-v2
-  DEVICE_PACKAGES := ath11k-wifi-indio-um-325ax-v2 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-endef
-TARGET_DEVICES += indio_um-325ax-v2
-
-define Device/indio_um-525axp
-  DEVICE_TITLE := Indio UM-525axp
-  DEVICE_DTS := qcom-ipq5018-indio-um-525axp
-  SUPPORTED_DEVICES := indio,um-525axp
-  DEVICE_PACKAGES := ath11k-wifi-indio-um-525axp ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-endef
-TARGET_DEVICES += indio_um-525axp
-
 define Device/udaya_a6_id2
   DEVICE_TITLE := Udaya A6 - ID2
   DEVICE_DTS := qcom-ipq5018-udaya-a6-id2

feeds/ipq807x_v5.4/qca-ssdk/patches/500-define-mib-loop-cnt-to-gobal.patch

@@ -1,61 +0,0 @@
---- a/include/init/ssdk_plat.h
-+++ b/include/init/ssdk_plat.h
-@@ -330,6 +330,7 @@ struct qca_phy_priv {
- 	struct mii_bus *miibus;
- /*qca808x_end*/
- 	u64 *mib_counters;
-+	a_uint32_t mib_loop_cnt;
- 	/* dump buf */
- 	a_uint8_t  buf[2048];
- 	a_uint32_t link_polling_required;
---- a/src/ref/ref_mib.c
-+++ b/src/ref/ref_mib.c
-@@ -479,39 +479,37 @@ qca_ar8327_sw_get_port_mib(struct switch
- #endif
-
- int
--_qca_ar8327_sw_capture_port_tx_counter(struct qca_phy_priv *priv, int port)
-+_qca_ar8327_sw_capture_port_tx_counter(a_uint32_t dev_id, int port)
- {
-     fal_mib_info_t  mib_Info;
-
-     memset(&mib_Info, 0, sizeof(fal_mib_info_t));
--    fal_get_tx_mib_info(priv->device_id, port, &mib_Info);
-+    fal_get_tx_mib_info(dev_id, port, &mib_Info);
-
-     return 0;
- }
-
- int
--_qca_ar8327_sw_capture_port_rx_counter(struct qca_phy_priv *priv, int port)
-+_qca_ar8327_sw_capture_port_rx_counter(a_uint32_t dev_id, int port)
- {
-     fal_mib_info_t  mib_Info;
-
-     memset(&mib_Info, 0, sizeof(fal_mib_info_t));
--    fal_get_rx_mib_info(priv->device_id, port, &mib_Info);
-+    fal_get_rx_mib_info(dev_id, port, &mib_Info);
-     return 0;
- }
-
- void
- qca_ar8327_sw_mib_task(struct qca_phy_priv *priv)
- {
--	static int loop = 0;
--
- 	mutex_lock(&priv->reg_mutex);
--	if ((loop % 2) == 0)
--		_qca_ar8327_sw_capture_port_rx_counter(priv, loop/2);
-+	if ((priv->mib_loop_cnt % 2) == 0)
-+		_qca_ar8327_sw_capture_port_rx_counter(priv->device_id, priv->mib_loop_cnt/2);
- 	else
--		_qca_ar8327_sw_capture_port_tx_counter(priv, loop/2);
-+		_qca_ar8327_sw_capture_port_tx_counter(priv->device_id, priv->mib_loop_cnt/2);
-
--	if(++loop == (2 * (priv->ports))) {
--		loop = 0;
-+	if(++priv->mib_loop_cnt == (2 * (priv->ports))) {
-+		priv->mib_loop_cnt = 0;
- 	}
-
- 	mutex_unlock(&priv->reg_mutex);

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap111.dts

@@ -200,7 +200,7 @@
 			phy-mode = "sgmii";
 			full-duplex;
 			pause;
-			airoha,surge = <0>;
+			airoha,surge = <1>;
 			airoha,polarity = <2>;
 		};
 

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/hotplug.d/iface/99-mtk-sr-scene-cond

@@ -34,11 +34,13 @@ case "$board" in
 
         if [ -f "$phy0_file" ]; then
             check_phy0=$(cat $phy0_file)
+            echo "check_phy0 = $check_phy0"
             [ "$check_phy0" == 0 ] && echo 1 > $phy0_file
         fi
 
         if [ -f "$phy1_file" ]; then
             check_phy1=$(cat $phy1_file)
+            echo "check_phy1 = $check_phy1"
             [ "$check_phy1" == 0 ] && echo 1 > $phy1_file
         fi
 

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-setting.patch

@@ -0,0 +1,107 @@
+# Description: The Mesh11sd daemon expects the mesh interface name to follow the format 'mesh<index>'. 
+# If it doesn't find this format, it attempts to set it in the UCI wireless configuration. 
+# However, when operating in other modes such as AP, STA, or Ad-Hoc, the script was patched to remove 
+# the mesh interface name from UCI. This process can lead to a race condition between the UI and Mesh11sd,
+# resulting in stale interface name values.
+# This patch resolves the issue by removing the setting of the interface name from the script, as it is 
+# now managed through the UI, ensuring consistency and eliminating the race condition.
+
+--- a/src/mesh11sd
++++ b/src/mesh11sd
+@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
+ 
+ 		if [ $mode -eq 5 ]; then
+ 			# startup=4, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 4 ]; then
+ 			# startup=4, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 3 ]; then
+ 			# startup=0, statusmode=2, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 2 ]; then
+ 			# startup=0, statusmode=2, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 1 ]; then
+ 			# startup=0, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 0 ]; then
+ 			# startup=0, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 		fi
+ 
+ 		if [ $mode -ne $lastmode ]; then
+@@ -441,26 +441,6 @@ elif [ "$1" = "daemon" ]; then
+ 			meshconfigs=$(uci show wireless 2> /dev/null | grep "mode='mesh'" | awk -F ".mode='mesh'" '{printf "%s " $1}')
+ 
+ 			if [ ! -z "$meshconfigs" ]; then
+-				for meshconfig in $meshconfigs; do
+-					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
+-
+-					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
+-						# No interface name in config, so add one
+-						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
+-						echo "$ucibatch" | uci batch
+-						changed=1
+-						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
+-						write_to_syslog
+-					fi
+-					meshindex=$(($meshindex+1))
+-				done
+-
+-				if [ "$changed" -eq 1 ]; then
+-					changed=0
+-					restart_mesh
+-					continue
+-				fi
+-
+ 				# get a list of interfaces
+ 				get_mesh_iflist
+ 
+@@ -482,13 +462,13 @@ elif [ "$1" = "daemon" ]; then
+ 						# this is not a mesh interface
+ 						continue
+ 					else
+-						# Check if this interface has a uci ifname
+-						uciname=$(uci show wireless | grep "ifname='$iface'" | awk -F "." '{printf "wireless.%s" $2}')
++						# Check if this interface mode is 'mesh'
++						uciname=$(uci show wireless | grep "mode='mesh'" | awk -F "." '{printf "wireless.%s" $2}')
+ 
+ 						if [ -z "$uciname" ]; then
+-							# Error - No interface name in config, we should have added one
++							# Error - No interface with mode as mesh
+ 							debugtype="err"
+-							syslogmessage="Error getting mesh interface name"
++							syslogmessage="Error getting mesh interface section"
+ 							write_to_syslog
+ 							continue
+ 						fi

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-upon-disable.patch

@@ -1,63 +0,0 @@
-# Description: The Mesh11sd daemon sets the interface name 'mesh<index>' to the mesh interface.
-# However, even after disabling the mesh mode, this interface name persists, leading to confusion
-# when operating in other modes like AP/STA/Ad-Hoc, where the interface name continues to display as 'mesh<idx>'.
-# This patch addresses the issue by removing the 'mesh<idx>' interface name from the configuration when the device
-# is no longer in mesh mode. As this modification is not present in the upstream version, it is necessary to apply
-# this local patch to resolve the inconsistency
-
-diff --git a/src/mesh11sd b/src/mesh11sd
-index 85041d3..5f50e97 100755
---- a/src/mesh11sd
-+++ b/src/mesh11sd
-@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
- 
- 		if [ $mode -eq 5 ]; then
- 			# startup=4, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 4 ]; then
- 			# startup=4, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 3 ]; then
- 			# startup=0, statusmode=2, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 2 ]; then
- 			# startup=0, statusmode=2, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 1 ]; then
- 			# startup=0, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 
- 		elif [ $mode -eq 0 ]; then
- 			# startup=0, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 		fi
- 
- 		if [ $mode -ne $lastmode ]; then

feeds/morse/utils/morse_mesh11sd/patches/003-accton_fix_ifname_confliction.patch

@@ -1,39 +0,0 @@
---- a/src/mesh11sd	2024-09-06 17:13:52.075070001 +0800
-+++ b/src/mesh11sd	2024-09-06 17:47:36.326914438 +0800
-@@ -434,7 +434,6 @@
- 		fi
- 
- 		lastmode=$mode
--		meshindex=0
- 
- 		if [ "$enabled" = 1 ]; then
- 			#get list of mesh configs
-@@ -443,16 +442,19 @@
- 			if [ ! -z "$meshconfigs" ]; then
- 				for meshconfig in $meshconfigs; do
- 					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
--
--					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
--						# No interface name in config, so add one
--						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
--						echo "$ucibatch" | uci batch
--						changed=1
--						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
--						write_to_syslog
-+					device=$(uci -q get $meshconfig.device)
-+					device_type=$(uci -q get wireless.$device.type)
-+					new_ifname="halow_mesh"
-+					if [ "$device_type" == "morse" ]; then
-+						if [ -z "$ifname" ] || [ "$ifname" != "$new_ifname" ]; then
-+							# No interface name in config, so add one
-+							ucibatch="set $meshconfig.ifname='$new_ifname'"
-+							echo "$ucibatch" | uci batch
-+							changed=1
-+							syslogmessage="Setting mesh interface name to [ $new_ifname ]"
-+							write_to_syslog
-+						fi
- 					fi
--					meshindex=$(($meshindex+1))
- 				done
- 
- 				if [ "$changed" -eq 1 ]; then

feeds/morse/utils/wpa_supplicant_s1g/Config.in

@@ -2,7 +2,7 @@ if PACKAGE_wpa_supplicant_s1g
 
 	config MORSE_WPA_SUPPLICANT_S1G_MESH_NETWORKING
 		bool
-		default y
+		default n
 		prompt "Enable mesh networking support"
 
 	config MORSE_WPA_SUPPLICANT_S1G_EAP

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -43,11 +43,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for EAP105
 endef
 
-define Package/ath12k-wifi-emplus-wap7635
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for WAP7635
-endef
-
 define Package/ath12k-wifi-sonicfi-rap7110c-341x
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP7710c_341x
@@ -93,11 +88,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for NWA130BE
 endef
 
-define Package/ath12k-wifi-zyxel-nwa50be
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for NWA50BE
-endef
-
 define Package/ath12k-wifi-cig-wf672
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF672
@@ -106,8 +96,8 @@ endef
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wf189-us.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.wf189-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.wf189.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.wf189.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
 define Package/ath12k-wifi-edgecore-eap105/install
@@ -117,13 +107,6 @@ define Package/ath12k-wifi-edgecore-eap105/install
 	$(INSTALL_DATA) ./board-2.bin.eap105.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
-define Package/ath12k-wifi-emplus-wap7635/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wap7635.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.wap7635.QCN6274 $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-endef
-
 define Package/ath12k-wifi-sonicfi-rap7110c-341x/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -161,8 +144,8 @@ endef
 define Package/ath12k-wifi-cig-wf189w/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189w-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.189w-us.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.189w.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189w.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
@@ -170,8 +153,8 @@ endef
 define Package/ath12k-wifi-cig-wf189h/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189h-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.189h-us.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
@@ -196,24 +179,15 @@ define Package/ath12k-wifi-zyxel-nwa130be/install
 	$(INSTALL_DATA) ./board-2.bin.nwa130be.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
-define Package/ath12k-wifi-zyxel-nwa50be/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.nwa50be.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.nwa50be.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
-endef
-
 define Package/ath12k-wifi-cig-wf672/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wf672-us.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US
-	$(INSTALL_DATA) ./board-2.bin.wf672-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.wf672.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.wf672.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
-$(eval $(call BuildPackage,ath12k-wifi-emplus-wap7635))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-h))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-s))
@@ -223,5 +197,4 @@ $(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))
 $(eval $(call BuildPackage,ath12k-wifi-zyxel-nwa130be))
-$(eval $(call BuildPackage,ath12k-wifi-zyxel-nwa50be))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf672))

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa50be-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
-                ],
-                "data": "nwa50be-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa50be-QCN6432.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=112"
-                ],
-                "data": "nwa50be-QCN6432.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=112"
-                ],
-                "data": "ipq5332_qcn6432.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -18,6 +18,3 @@ $encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX
 
 $encoder -c board-2-nwa130be-IPQ5332.json -o board-2.bin.nwa130be.IPQ5332
 $encoder -c board-2-nwa130be-QCN92XX.json -o board-2.bin.nwa130be.QCN92XX
-
-$encoder -c board-2-nwa50be-IPQ5332.json -o board-2.bin.nwa50be.IPQ5332
-$encoder -c board-2-nwa50be-QCN6432.json -o board-2.bin.nwa50be.QCN6432

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/Makefile

@@ -24,9 +24,7 @@ endef
 
 define KernelPackage/cig-wifi-mode-sw/install
 	$(INSTALL_DIR) $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/init.d/
 	$(INSTALL_BIN) ./files/cig_wifi_mode_sw $(1)/usr/sbin/cig_wms
-	$(INSTALL_BIN) ./files/cig_wifi_mode_boot $(1)/etc/init.d/cig_wmb
 endef
 
 $(eval $(call KernelPackage,cig-wifi-mode-sw))

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_boot

@@ -1,13 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=60
-
-boot(){
-	local bands=$(cat /proc/rf_switch)
-
-	if [ "x$bands" = "x3" ]; then
-		echo "AFC is not ready, switch to 2-band mode" >/dev/console
-		echo 2 > /proc/rf_switch
-		firstboot -y -r
-	fi
-}

feeds/qca-wifi-7/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude || 0;
-let longitude = gps_info.longitude || 0;
+let latitude = gps_info.latitude ?? 0;
+let longitude = gps_info.longitude ?? 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation || 0;
+afc_location.height = gps_info.elevation ?? 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = int(gps_info.major_axis) || 1;
-afc_location.minor_axis = int(gps_info.minor_axis) || 1;
-afc_location.orientation = gps_info.major_orientation || 0;
-afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
+afc_location.major_axis = gps_info.major_axis ?? 0;
+afc_location.minor_axis = gps_info.minor_axis ?? 0;
+afc_location.orientation = gps_info.major_orientation ?? 0;
+afc_location.vertical_tolerance = gps_info.vdop ?? 0;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/qca-wifi-7/hostapd/files/common.uc

@@ -259,13 +259,8 @@ const phy_proto = {
 			addr[0] ^= idx << 2;
 			break;
 		case "b5":
-			if (mbssid) {
-				let b5 = addr[5];
-				addr[5] = addr[3];
-				addr[3] = b5;
-				addr[5] &= ~0xf;
+			if (mbssid)
 				addr[0] |= 2;
-			}
 			addr[5] ^= idx;
 			break;
 		default:

feeds/qca-wifi-7/hostapd/files/hostapd.uc

@@ -1,8 +1,7 @@
 let libubus = require("ubus");
-import { open, readfile, writefile } from "fs";
+import { open, readfile } from "fs";
 import { wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open, wdev_set_radio_mask } from "common";
 
-let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -1007,6 +1006,7 @@ let main_obj = {
 hostapd.data.ubus = ubus;
 hostapd.data.obj = ubus.publish("hostapd", main_obj);
 
+
 let auth_obj = {};
 hostapd.data.auth_obj = ubus.publish("hostapd-auth", auth_obj);
 
@@ -1026,24 +1026,10 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let wireless_config = uci.get_all('wireless');
-		for (let l, afc_server in wireless_config) {
-			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
-				hostapd.printf(`Sending AFC request: ${data}`);
-				writefile("/tmp/afc-request.json", data);
-
-				if (afc_server.access_token)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-				else if (afc_server.cert)
-					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
-
-				let afc_response = (readfile("/tmp/afc-response.json"));
-				if (afc_response)
-					return afc_response;
-				else
-					return;
-			}
-		}
+		let ret = ubus.call("afc", "request", { data });
+		if (type(ret) != "object")
+			return;
+		return ret.data;
 	},
 	bss_create: function(phy, name, obj) {
 		phy = hostapd.data.config[phy];

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,11 +7,6 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-emplus,wap7635)
-	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
-	ucidef_set_led_default "ledg" "LEDG" "sys:green" "off"
-	ucidef_set_led_default "ledr" "LEDR" "sys:red" "off"
-	;;
 sercomm,ap72tip-v4|\
 sercomm,ap72tip)
 	ucidef_set_led_default "power" "POWER" "blue:status" "on"

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -13,6 +13,7 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
 		;;
 	cig,wf189|\
+	cig,wf672|\
 	edgecore,eap105|\
 	sercomm,ap72tip|\
 	sonicfi,rap750w-311a)
@@ -20,8 +21,7 @@ ipq53xx_setup_interfaces()
 		;;
 	sonicfi,rap7110c-341x|\
 	sonicfi,rap750e-h|\
-	sonicfi,rap750e-s|\
-	zyxel,nwa50be)
+	sonicfi,rap750e-s)
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
 	cig,wf189w)
@@ -32,10 +32,6 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
 		;;
-	cig,wf672)
-		ucidef_set_interface_wan "eth0 eth1"
-		;;
-	emplus,wap7635|\
 	sercomm,ap72tip-v4)
 		ucidef_set_interface_wan "eth0"
 		;;	
@@ -108,7 +104,6 @@ qcom_setup_macs()
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
                 ;;
-        emplus,wap7635|\
         sercomm,ap72tip-v4)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
@@ -128,16 +123,6 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
 		;;
-	zyxel,nwa50be)
-		wan_mac=$(cat /proc/cmdline)
-		wan_mac="${wan_mac##*hwaddr=}"
-		wan_mac="${wan_mac%% *}"
-		wan_mac="$(echo ${wan_mac} | sed 's/\(..\)/\1:/g;s/:$//')"
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ucidef_set_label_macaddr $wan_mac
-		ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
-		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
-		;;
         *)
                 wan_mac=$(cat /sys/class/net/eth1/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -64,12 +64,10 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
 	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
-	emplus,wap7635|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
-	zyxel,nwa130be|\
-	zyxel,nwa50be)
-		caldata_extract "0:ART" 0x1000 0x20000
+	zyxel,nwa130be)
+		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
 	cig,wf672)
 		cig_ipq5322_cal
@@ -88,7 +86,6 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
-	emplus,wap7635|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
 	zyxel,nwa130be)
@@ -125,50 +122,6 @@ ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi2@c0000000.bin)
 	cig,wf189w)
 		caldata_extract "0:ART" 0x58800 0x20000
 		;;
-	zyxel,nwa50be)
-		caldata_extract "0:ART" 0x58800 0x2d000
-		;;
-	esac
-	;;
-ath12k/IPQ5332/hw1.0/board-2.bin)
-	case "$board" in
-	cig,wf189|\
-	cig,wf189h|\
-	cig,wf189w|\
-	cig,wf672)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.CA /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-                else
-                        ln -s /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-                fi
-                ;;
-	esac
-	;;
-ath12k/QCN6432/hw1.0/board-2.bin)
-	case "$board" in
-	cig,wf189h|\
-	cig,wf189w)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.CA /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-                else
-                        ln -s /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-                fi
-                ;;
-	esac
-	;;
-ath12k/QCN92XX/hw1.0/board-2.bin)
-	case "$board" in
-	cig,wf189|\
-	cig,wf672)
-                country=`cat /etc/ucentral/country`
-                if [ "$country" == "CA" ]; then
-                        ln -s /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.CA /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-                else
-                        ln -s /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-                fi
-                ;;
 	esac
 	;;
 *)

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/phy_quirks

@@ -9,5 +9,14 @@ boot() {
 	edgecore,eap105)
 		ssdk_sh debug phy set 0x1 0x601FD032 0xff
 		;;
+	zyxel,nwa130be)
+		#eth0: APPE: phyaddr 4  green:2.5G  orange:others
+		ssdk_sh debug phy set 4 0x40078074 0x670
+		ssdk_sh debug phy set 4 0x40078078 0x8600
+
+		#eth1:  MHT: phyaddr 3  green:2.5G orange:others
+		ssdk_sh debug phy set 3 0x40078074 0x670
+		ssdk_sh debug phy set 3 0x40078078 0x8600
+		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -136,8 +136,7 @@ platform_do_upgrade() {
 	sercomm,ap72tip|\
 	cig,wf189w|\
 	cig,wf189h|\
-	cig,wf189|\
-	emplus,wap7635)
+	cig,wf189)
 		if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
 			CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
 			CI_BOOTCFG=1
@@ -174,8 +173,7 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
-	zyxel,nwa130be|\
-	zyxel,nwa50be)
+	zyxel,nwa130be)
 		nand_upgrade_tar "$1"
 		;;
 	esac

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-emplus-wap7635.dts

@@ -1,413 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Emplus WAP7635";
-	compatible = "emplus,wap7635", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		ethernet0 = "/soc/dp1";
-
-        led-boot = &led_power_green;
-        led-failsafe = &led_power_red;
-        led-running = &led_power_green;
-        led-upgrade = &led_power_green;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 51 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			/*num_devices = <0x1>;*/
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x2>; /* lan port bitmap */
-				switch_wan_bmp = <0>; /* wan port bitmap */
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-			/* phy-mode = "usxgmii"; */
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;			/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;		/* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;			/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;		/* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;			/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;			/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;			/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;				/* Number of PPEDS nodes */
-
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,		/* PPEDS Node#0 ring and queue map */
-							 <2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,			/* Port0 per-core Tx ring map */
-							  <12 13 14 15>,		/* MHT-Port1 per-core Tx ring map */
-							  <4 5 6 7>,			/* MHT-Port2 per-core Tx ring map/packets from  vp*/
-							  <16 17 18 19>,		/* MHT-Port3 per-core Tx ring map */
-							  <20 21 22 23>;		/* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;	/* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;			/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;		/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;				/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-									 <1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-									 <2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-									 <3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-									 <4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-									 <5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-									 <6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-									 <7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,					/* Tx complete ring id #4 IRQ info */
-						 <0 164 4>,					/* Tx complete ring id #5 IRQ info */
-						 <0 165 4>,					/* Tx complete ring id #6 IRQ info */
-						 <0 166 4>,					/* Tx complete ring id #7 IRQ info */
-						 <0 167 4>,					/* Tx complete ring id #8 IRQ info */
-						 <0 168 4>,					/* Tx complete ring id #9 IRQ info */
-						 <0 169 4>,					/* Tx complete ring id #10 IRQ info */
-						 <0 170 4>,					/* Tx complete ring id #11 IRQ info */
-						 <0 171 4>,					/* Tx complete ring id #12 IRQ info */
-						 <0 172 4>,					/* Tx complete ring id #13 IRQ info */
-						 <0 173 4>,					/* Tx complete ring id #14 IRQ info */
-						 <0 174 4>,					/* Tx complete ring id #15 IRQ info */
-						 <0 139 4>,					/* Rx desc ring id #12 IRQ info */
-						 <0 140 4>,					/* Rx desc ring id #13 IRQ info */
-						 <0 141 4>,					/* Rx desc ring id #14 IRQ info */
-						 <0 142 4>,					/* Rx desc ring id #15 IRQ info */
-						 <0 191 4>,					/* Misc error IRQ info */
-						 <0 155 4>,					/* RxFill ring id #4 IRQ info */
-						 <0 156 4>,					/* RxFill ring id #5 IRQ info */
-						 <0 157 4>,					/* RxFill ring id #6 IRQ info */
-						 <0 158 4>,					/* RxFill ring id #7 IRQ info */
-						 <0 160 4>,					/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-						 <0 128 4>,					/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-						 <0 152 4>,					/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-						 <0 161 4>,					/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-						 <0 129 4>,					/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-						 <0 153 4>,					/* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-						 <0 175 4>,					/* MHT port Tx complete ring id #16 IRQ info */
-						 <0 176 4>,					/* MHT port Tx complete ring id #17 IRQ info */
-						 <0 177 4>,					/* MHT port Tx complete ring id #18 IRQ info */
-						 <0 178 4>,					/* MHT port Tx complete ring id #19 IRQ info */
-						 <0 179 4>,					/* MHT port Tx complete ring id #20 IRQ info */
-						 <0 180 4>,					/* MHT port Tx complete ring id #21 IRQ info */
-						 <0 181 4>,					/* MHT port Tx complete ring id #22 IRQ info */
-						 <0 182 4>;					/* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			led_power_blue: led@34 {
-				label = "sys:blue";
-				gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-			led_power_green: led@35 {
-				label = "sys:green";
-				gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-			led_power_red: led@37 {
-				label = "sys:red";
-				gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-						<1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&mhi_region1 {
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-/* QCN9224 5G+6G */
-&wifi4 {
-	hremote_node = <&qcn9224_pcie1>;
-	board_id = <0x1019>;
-	node_id = <0x1>;
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-						 0x4 0x4 0x18 0x3 0x0 0x0     /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-						 0x0 0x4 0x0 0x0 0x0 0x0>;    /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x1019>;
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	button_pins: button-state {
-		pins = "gpio24";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio45";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "disabled";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap7110c-341x.dts

@@ -31,20 +31,6 @@
 		stdout-path = "serial0";
 	};
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ramoops@49c00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x49c00000 0x0 0x100000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
-	};
-
 	soc@0 {
 		mdio:mdio@90000 {
 			pinctrl-0 = <&mdio1_pins>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750e-h.dts

@@ -190,14 +190,6 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
-		ramoops@49c00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x49c00000 0x0 0x100000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
-
 		q6_mem_regions: q6_mem_regions@4A900000  {
 		        no-map;
 		        reg = <0x0 0x4A900000 0x0 0x5100000>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750e-s.dts

@@ -190,14 +190,6 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
-		ramoops@49c00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x49c00000 0x0 0x100000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
-
 		q6_mem_regions: q6_mem_regions@4A900000  {
 		        no-map;
 		        reg = <0x0 0x4A900000 0x0 0x5100000>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750w-311a.dts

@@ -190,14 +190,6 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
-		ramoops@49c00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x49c00000 0x0 0x100000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
-
 		q6_mem_regions: q6_mem_regions@4A900000  {
 		        no-map;
 		        reg = <0x0 0x4A900000 0x0 0x5100000>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-zyxel-nwa130be.dts

@@ -18,21 +18,6 @@
 	model = "Zyxel NWA130BE";
 	compatible = "zyxel,nwa130be", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332-rdp468", "qcom,ipq5332";
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ramoops@49c00000 {
-			compatible = "ramoops";
-			no-map;
-			reg = <0x0 0x49c00000 0x0 0x100000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
-	};
-
 	aliases {
 		serial0 = &blsp1_uart0;
 		serial1 = &blsp1_uart1;
@@ -143,26 +128,6 @@
 					blink_en = "enable";
 					active = "high";
 				};
-
-				qcom,port_ledinfo {
-					port@1 {
-						port = <2>;
-						led_source@0 {
-							source = <0>;
-							mode = "normal";
-							speed = "2500M";
-							active = "high";
-							blink_en = "enable";
-						};
-						led_source@1 {
-							source = <1>;
-							mode = "normal";
-							speed = "10M", "100M","1000M";
-							active = "high";
-							blink_en = "enable";
-						};
-					};
-				};
 			};
 
 			ess-switch1@1 {
@@ -199,26 +164,6 @@
 					};
 				};
 
-				qcom,port_ledinfo {
-					port@3 {
-						port = <3>;
-						led_source@0 {
-							source = <0>;
-							mode = "normal";
-							speed = "2500M";
-							active = "high";
-							blink_en = "enable";
-						};
-						led_source@1 {
-							source = <1>;
-							mode = "normal";
-							speed = "10M", "100M","1000M";
-							active = "high";
-							blink_en = "enable";
-						};
-					};
-				};
-
 				led_source@2 {
 					source = <2>;
 					mode = "normal";

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-zyxel-nwa50be.dts

@@ -1,956 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP442 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "ipq5332.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332-default-memory.dtsi"
-
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ5332/RDP442/AP-MI01.3";
-	compatible = "zyxel,nwa50be", "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332-rdp442", "qcom,ipq5332";
-
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-
-	/*     512M  Layout for IPQ5332 + QCN6432 + QCN6432
-	 * +==========+==============+========================+
-	 * |         |              |                         |
-	 * |  Region | Start Offset |          Size           |
-	 * |         |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * |   Q6    |              |                         |
-	 * |  code/  |  0x4A900000  |          25MB           |
-	 * |  data   |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  data   |  0x4C200000  |          17MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * | M3 Dump |  0x4D300000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  QDSS   |  0x4D400000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  CALDB  |  0x4D500000  |           3MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  data   |  0x4D800000  |          16MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * | M3 Dump |  0x4E800000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  QDSS   |  0x4E900000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  CALDB  |  0x4EA00000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  data   |  0x4EF00000  |          16MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * | M3 Dump |  0x4FF00000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  QDSS   |  0x50000000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  CALDB  |  0x50100000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |         |              |                         |
-	 * |   MLO   |  0x50600000  |          12MB           |
-	 * +==================================================+
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * |             Rest of memory for Linux             |
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * +==================================================+
-	 */
-
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			reg = <0x0 0x4a900000 0x0 0x5D00000>;
-			no-map;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-			no-map;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			reg = <0x0 0x4C200000 0x0 0x1100000>;
-			no-map;
-		};
-
-		m3_dump: m3_dump@4D300000 {
-			reg = <0x0 0x4D300000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_etr_region: q6_etr_dump@4D400000 {
-			reg = <0x0 0x4D400000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D500000 {
-			reg = <0x0 0x4D500000 0x0 0x300000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4D800000 {
-			reg = <0x0 0x4D800000 0x0 0x1000000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4E800000 {
-			reg = <0x0 0x4E800000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4E900000 {
-			reg = <0x0 0x4E900000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4EA00000 {
-			reg = <0x0 0x4EA00000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4EF00000 {
-			reg = <0x0 0x4EF00000 0x0 0x1000000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@4FF00000 {
-			reg = <0x0 0x4FF00000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@50000000 {
-			reg = <0x0 0x50000000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@50100000 {
-			reg = <0x0 0x50100000 0x0 0x500000>;
-			no-map;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@50600000 {
-			reg = <0x0 0x50600000 0x0 0xC00000>;
-			no-map;
-		};
-	};
-#else
-
-	/*  1G  Layout for IPQ5332 + QCN6432 + QCN6432
-	* +==========+==============+========================+
-	* |         |              |                         |
-	* |  Region | Start Offset |          Size           |
-	* |         |              |                         |
-	* +---------+--------------+-------------------------+
-	* |   Q6    |              |                         |
-	* |  code/  |  0x4A900000  |          25MB           |
-	* |  data   |              |                         |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* |  data   |  0x4C200000  |          21MB           |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* | M3 Dump |  0x4D700000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* |  QDSS   |  0x4D800000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* | IPQ5332 |              |                         |
-	* |  CALDB  |  0x4D900000  |           5MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* |  data   |  0x4DE00000  |          21MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* | M3 Dump |  0x4F300000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* |  QDSS   |  0x4F400000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_1|              |                         |
-	* |  CALDB  |  0x4F500000  |           5MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* |  data   |  0x4FA00000  |          21MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* | M3 Dump |  0x50F00000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* |  QDSS   |  0x51000000  |           1MB           |
-	* +---------+--------------+-------------------------+
-	* |QCN6432_2|              |                         |
-	* |  CALDB  |  0x51100000  |           5MB           |
-	* +---------+--------------+-------------------------+
-	* |         |              |                         |
-	* |   MLO   |  0x51600000  |          12MB           |
-	* +==================================================+
-	* |                                                  |
-	* |                                                  |
-	* |                                                  |
-	* |             Rest of memory for Linux             |
-	* |                                                  |
-	* |                                                  |
-	* |                                                  |
-	* +==================================================+
-	*/
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		ramoops@49c00000 {
-			compatible = "ramoops";
-			reg = <0x0 0x49c00000 0x0 0x100000>;
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-		};
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			no-map;
-			reg = <0x0 0x4a900000 0x0 0x6D00000>;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			no-map;
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			no-map;
-			reg = <0x0 0x4C200000 0x0 0x1500000>;
-		};
-
-		m3_dump: m3_dump@4D700000 {
-			no-map;
-			reg = <0x0 0x4D700000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D800000 {
-			no-map;
-			reg = <0x0 0x4D800000 0x0 0x100000>;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
-			no-map;
-			reg = <0x0 0x4D900000 0x0 0x500000>;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
-			no-map;
-			reg = <0x0 0x4DE00000 0x0 0x1500000>;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
-			no-map;
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-        };
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
-			no-map;
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
-			no-map;
-			reg = <0x0 0x4F500000 0x0 0x500000>;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
-			no-map;
-			reg = <0x0 0x4FA00000 0x0 0x1500000>;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
-			no-map;
-			reg = <0x0 0x50F00000 0x0 0x100000>;
-		};
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
-			no-map;
-			reg = <0x0 0x51000000 0x0 0x100000>;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
-			no-map;
-			reg = <0x0 0x51100000 0x0 0x500000>;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@51600000 {
-			no-map;
-			reg = <0x0 0x51600000 0x0 0xC00000>;
-		};
-	};
-#endif
-
-	aliases {
-		serial0 = &blsp1_uart0;
-		serial1 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio22 is for wan napa, gpio51 for lan napa*/
-			phy-reset-gpio = <&tlmm 51 GPIO_ACTIVE_LOW>;
-			status = "okay";
-
-			phy2: ethernet-phy@2 {
-				reg = <28>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-			led_blue{
-				label = "led_blue";
-				gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_blue";
-				default-state = "off";
-			};
-			led_green {
-				label = "led_green";
-				gpio = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_green";
-				default-state = "on";
-			};
-			led_white {
-				label = "led_white";
-				gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_white";
-				default-state = "off";
-			};
-			led_red {
-				label = "led_red";
-				gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "led_red";
-				default-state = "off";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x4>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>; /* wan port bitmap */
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xc>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <2>;
-						phy_address = <28>;
-					};
-				};
-				qcom,port_ledinfo {
-					port@0 {
-						port = <2>;
-						led_source@0 {
-							source = <0>;
-							mode = "normal";
-							speed = "2500M";
-							active = "high";
-							blink_en = "enable";
-						};
-						led_source@1 {
-							source = <1>;
-							mode = "normal";
-							speed = "10M", "100M","1000M";
-							active = "high";
-							blink_en = "enable";
-						};
-					};
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <28>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec0 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <28>;
-			mdiobus = <&mdio>;
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			chip_info = <0 1 1>,
-				    <1 1 0>;
-		};
-
-		q6v5_wcss: remoteproc@d100000 {
-			boot-args = <0x1 0x4 0x3 0x0 0x26 0x2>,
-					<0x1 0x4 0x4 0x1 0x2f 0x2>;
-			memory-region = <&q6_mem_regions>;
-
-			/delete-node/ remoteproc_pd1;
-			/delete-node/ remoteproc_pd2;
-			/delete-node/ remoteproc_pd3;
-
-			q6_wcss_pd4: remoteproc_pd4 {
-				compatible = "qcom,ipq5332-mpd-upd-text";
-				firmware = "IPQ5332/q6_fw4.mdt";
-
-				q6_wcss_pd1: remoteproc_pd1 {
-					compatible = "qcom,ipq5332-wcss-ahb-mpd";
-					firmware = "IPQ5332/q6_fw1.mdt";
-					m3_firmware = "IPQ5332/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 8 0>,
-							<&wcss_smp2p_in 9 0>,
-							<&wcss_smp2p_in 12 0>,
-							<&wcss_smp2p_in 11 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 8>,
-							<&wcss_smp2p_out 9>,
-							<&wcss_smp2p_out 10>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					memory-region = <&q6_ipq5332_data>,
-							<&m3_dump>,
-							<&q6_etr_region>,
-							<&q6_ipq5332_caldb>;
-				};
-
-				q6_wcss_pd2: remoteproc_pd2 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw2.mdt";
-					m3_firmware = "qcn6432/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 16 0>,
-							<&wcss_smp2p_in 17 0>,
-							<&wcss_smp2p_in 20 0>,
-							<&wcss_smp2p_in 19 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 16>,
-							<&wcss_smp2p_out 17>,
-							<&wcss_smp2p_out 18>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					memory-region = <&q6_qcn6432_data_1>,
-							<&m3_dump_qcn6432_1>,
-							<&q6_qcn6432_etr_1>,
-							<&q6_qcn6432_caldb_1>;
-					status = "okay";
-				};
-
-				q6_wcss_pd3: remoteproc_pd3 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw3.mdt";
-					interrupts-extended = <&wcss_smp2p_in 24 0>,
-							<&wcss_smp2p_in 25 0>,
-							<&wcss_smp2p_in 28 0>,
-							<&wcss_smp2p_in 27 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 24>,
-							<&wcss_smp2p_out 25>,
-							<&wcss_smp2p_out 26>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					memory-region = <&q6_qcn6432_data_2>,
-							<&m3_dump_qcn6432_2>,
-							<&q6_qcn6432_etr_2>,
-							<&q6_qcn6432_caldb_2>;
-					status = "okay";
-				};
-			};
-		};
-	};
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-        pinctrl-0 = <&serial_1_pins>;
-        pinctrl-names = "default";
-        status = "disabled";
-};
-
-&blsp1_i2c1 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11", "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	led_pins: led_pins {
-		board_info {
-			pins = "gpio2", "gpio3";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-			input-enable;
-		};
-
-		apd_dc_in {
-			pins = "gpio24";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down; //Adapter un-plug
-			input-enable;
-		};
-
-		poe_status {
-			pins = "gpio34";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up; //AF
-			input-enable;
-		};
-
-		/* To MR pin */
-		rst_mb {
-			pins = "gpio29";
-			function = "gpio";
-			drive-strength = <8>;
-			output-high;
-		};
-
-		led_blue {
-			pins = "gpio22";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_green {
-			pins = "gpio45";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_white {
-			pins = "gpio43";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_red {
-			pins = "gpio44";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux {
-		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	i2c_1_pins: i2c-1-state {
-		pins = "gpio29", "gpio30";
-		function = "blsp1_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	button_pins: button-state {
-		pins = "gpio35";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	mdio1_pins: mdio1-state {
-		mux_0 {
-			pins = "gpio27";
-			function = "mdc1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio28";
-			function = "mdio1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,select-utmi-as-pipe-clk;
-	status = "okay";
-
-	dwc3@8a00000 {
-		/delete-property/ #phy-cells;
-		/delete-property/ phys;
-		/delete-property/ phy-names;
-	};
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&wifi0 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D900000 0x4D500000 0x0 0x0 0x0 0x0>;
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-	qcom,tgt-mem-mode = <1>;
-	qcom,caldb-size = <0x300000>;
-#else
-	qcom,tgt-mem-mode = <0>;
-	qcom,caldb-size = <0x500000>;
-#endif
-	qcom,board_id = <0x12>;
-#if defined(__CNSS2__)
-	mem-region = <&q6_ipq5332_data>;
-#else
-	memory-region = <&q6_ipq5332_data>;
-#endif
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	status = "okay";
-};
-
-&wifi1 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd2>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,bdf-addr = <0x4DE00000 0x4D800000 0x0 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4F500000 0x4EA00000 0x0 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x20000884>;
-	qcom,caldb-size = <0x500000>;
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-	qcom,tgt-mem-mode = <1>;
-#else
-	qcom,tgt-mem-mode = <0>;
-#endif
-	qcom,board_id = <0x060>;
-#if defined(__CNSS2__)
-	mem-region = <&q6_qcn6432_data_1>;
-#else
-	memory-region = <&q6_qcn6432_data_1>;
-#endif
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <1>;
-	status = "disabled";
-	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};
-
-&wifi2 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd3>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,bdf-addr = <0x4FA00000 0x4EF00000 0x4FA00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x51100000 0x50100000 0x51100000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x18000884>;
-	qcom,caldb-size = <0x500000>;
-#ifdef __IPQ_MEM_PROFILE_512_MB__
-	qcom,tgt-mem-mode = <1>;
-#else
-	qcom,tgt-mem-mode = <0>;
-#endif
-	qcom,board_id = <0x070>;
-#if defined(__CNSS2__)
-	mem-region = <&q6_qcn6432_data_2>;
-#else
-	memory-region = <&q6_qcn6432_data_2>;
-#endif
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <1>;
-	qcom,wide_band = <1>;
-	status = "okay";
-	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -52,19 +52,6 @@ define Device/edgecore_eap105
 endef
 TARGET_DEVICES += edgecore_eap105
 
-define Device/emplus_wap7635
-  DEVICE_TITLE := EMPLUS WAP7635
-  DEVICE_DTS := ipq5332-emplus-wap7635
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-emplus-wap7635 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
-endef
-TARGET_DEVICES += emplus_wap7635
-
 define Device/sonicfi_rap7110c_341x
   DEVICE_TITLE := SONICFI RAP7110C-341X
   DEVICE_DTS := ipq5332-sonicfi-rap7110c-341x
@@ -162,22 +149,6 @@ define Device/zyxel_nwa130be
 endef
 TARGET_DEVICES += zyxel_nwa130be
 
-
-define Device/zyxel_nwa50be
-  DEVICE_TITLE := Zyxel NWA50BE
-  DEVICE_DTS := ipq5332-zyxel-nwa50be
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.3
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-zyxel-nwa50be ath12k-firmware-ipq5332-peb-peb -ath12k-firmware-qcn92xx
-endef
-TARGET_DEVICES += zyxel_nwa50be
-
 define Device/cig_wf672
   DEVICE_TITLE := CIG WF672
   DEVICE_DTS := ipq5332-cig-wf672

feeds/qca-wifi-7/ipq53xx/patches-6.1/0660-add-IPQ_MEM_PROFILE-in-arm64-kconfig.patch

@@ -1,33 +0,0 @@
-From f7b27331b915477cd289c37b56efb0d28b2d6f38 Mon Sep 17 00:00:00 2001
-From: Antonio Wu <antonio.wu@cybertan.com.tw>
-Date: Tue, 5 Aug 2025 10:39:58 +0000
-Subject: [PATCH] Add IPQ_MEM_PROFILE in arm64 kconfig
-
----
- arch/arm64/Kconfig | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
-index 702a289..7864e79 100644
---- a/arch/arm64/Kconfig
-+++ b/arch/arm64/Kconfig
-@@ -2143,6 +2143,16 @@ config STACKPROTECTOR_PER_TASK
- 	def_bool y
- 	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_SYSREG
- 
-+config IPQ_MEM_PROFILE
-+	int "Select Memory Profile"
-+	range 0 1024
-+	default 0
-+	help
-+	  This option select memory profile to be used, which defines
-+	  the reserved memory configuration used in device tree.
-+
-+	  If unsure, say 0
-+
- # The GPIO number here must be sorted by descending number. In case of
- # a multiplatform kernel, we just want the highest value required by the
- # selected platforms.
--- 
-2.17.1
-

feeds/qca-wifi-7/mac80211/patches-sonicfi_rap7110c_341x/ath12k/0001-sonicfi_rap7110c-341x-therlaml-setting.patch

@@ -1,63 +0,0 @@
-Index: backports-6.5-rc3/drivers/net/wireless/ath/ath12k/thermal.h
-===================================================================
---- backports-6.5-rc3.orig/drivers/net/wireless/ath/ath12k/thermal.h
-+++ backports-6.5-rc3/drivers/net/wireless/ath/ath12k/thermal.h
-@@ -13,35 +13,35 @@
- 
- /* Below temperatures are in celsius */
- #define ATH12K_THERMAL_LVL0_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 110
--#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 105
--#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 110
-+#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 115
-+#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 125
- 
- #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
--#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
--#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
--#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 100
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 110
- #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
- 
- #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
--#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
--#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 90
--#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 100
-+#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 30
-+#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 50
-+#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 70
- 
--#define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
-+#define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE 0
-+#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE 20
-+#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE 40
-+#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE 80
-+#define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE 100
- 
- #define THERMAL_CONFIG_POUT0                        0
- #define THERMAL_CONFIG_POUT1                        12

feeds/qca-wifi-7/mac80211/patches-sonicfi_rap750w_311a/ath12k/0001-sonicfi-rap750w-311a-thermal-setting.patch

@@ -1,57 +0,0 @@
---- a/drivers/net/wireless/ath/ath12k/thermal.h
-+++ b/drivers/net/wireless/ath/ath12k/thermal.h
-@@ -13,34 +13,34 @@
- 
- /* Below temperatures are in celsius */
- #define ATH12K_THERMAL_LVL0_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 110
--#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 100
-+#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 110
- #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
- 
- #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
--#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
--#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
--#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 100
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 110
- #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
- 
- #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
--#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
--#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 90
--#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 100
-+#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 30
-+#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 50
-+#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 70
- 
- #define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
-+#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
-+#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
-+#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
- #define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
- 
- #define THERMAL_CONFIG_POUT0                        0

feeds/qca-wifi-7/mac80211/patches-zyxel_nwa50be/ath12k/0001-thermal-thermal-setting.patch

@@ -1,74 +0,0 @@
-From 357da3320f8bcad056b905fb85cad3a29c343d31 Mon Sep 17 00:00:00 2001
-From: YenLin Pan <yenlin.pan@zyxel.com.tw>
-Date: Tue, 12 Aug 2025 15:41:39 +0800
-Subject: [PATCH] thermal: thermal setting
-
-lo0 -100 -hi0 105 -off0 0
-lo1 95 -hi1 110 -off1 20
-lo2 100 -hi2 115 -off2 60
-lo3 105 -hi3 119 -off3 98
-
-Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
----
- drivers/net/wireless/ath/ath12k/thermal.h | 34 +++++++++++------------
- 1 file changed, 17 insertions(+), 17 deletions(-)
-
-diff --git a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
-index 5c91906..e81f9a4 100644
---- a/drivers/net/wireless/ath/ath12k/thermal.h
-+++ b/drivers/net/wireless/ath/ath12k/thermal.h
-@@ -13,34 +13,34 @@
- 
- /* Below temperatures are in celsius */
- #define ATH12K_THERMAL_LVL0_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 100
-+#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 105
- #define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 110
- #define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 115
- #define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 105
--#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
-+#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 119
- 
- #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
--#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
--#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
--#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
--#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
--#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
--#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
--#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
-+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
-+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 105
-+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 119
- #define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
- #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
- 
- #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
--#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
--#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 90
--#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 100
-+#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 20
-+#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 60
-+#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 98
- 
- #define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
--#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
-+#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
-+#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
-+#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
- #define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
- 
- #define THERMAL_CONFIG_POUT0                        0
--- 
-2.34.1
-

feeds/qca-wifi-7/qca-ssdk-qca/Makefile

@@ -100,7 +100,6 @@ endif
 ifdef CONFIG_TARGET_PROFILE
 TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
 PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
-FILES_PROFILE_NAME=files-$(subst DEVICE_,,$(TARGET_PROFILE))
 endif
 
 QCASSDK_CONFIG_OPTS+= TOOL_PATH=$(TOOLCHAIN_BIN_PATH) \
@@ -203,15 +202,6 @@ define patch_profile
 	$(call PatchDir/Default,$(PKG_BUILD_DIR),./$(PATCH_PROFILE_NAME))
 endef
 
-define files_profile
-
-	if [ -d "./$(FILES_PROFILE_NAME)" ]; then \
-		$(CP) ./$(FILES_PROFILE_NAME)/* ./files/ ; \
-	fi
-endef
-
 Hooks/Prepare/Post += patch_profile
-Hooks/Prepare/Post += files_profile
-
 $(eval $(call KernelPackage,qca-ssdk-qca-nohnat))
 $(eval $(call KernelPackage,qca-ssdk-qca-hnat))

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa130be/qca-ssdk

@@ -1,317 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
-# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-
-START=16
-
-#!/bin/sh
-ruletype="ip4 ip6"
-side="wan lan"
-qwan="1 3 2 0 5 7 6 4"
-qlan="0 1 2 3 4 5 6 7"
-
-function create_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		#echo $queue
-		#echo "creating list $listid"
-		ssdk_sh acl list create $listid 255
-		ruleid=0
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
-				#echo $cmd
-				if [ "$rt" == "ip4" ];then
-					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				else
-					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				fi
-				if [ $ruleid -le 3 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				elif [ $ruleid -le 7 ];then
-					#zero dscp
-					cmd="$cmd n"
-				elif [ $ruleid -le 11 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				else
-					#zero dscp
-					cmd="$cmd n"
-				fi
-				p=$((ruleid/2))
-				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
-				#echo $cmd
-				$cmd
-				ruleid=`expr $ruleid + 1`
-			done
-		done
-		ssdk_sh acl list bind $listid 0 1 $portmap
-	done
-}
-
-function create_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 0
-	ssdk_sh cosmap pri2q set 3 0
-	ssdk_sh cosmap pri2q set 4 1
-	ssdk_sh cosmap pri2q set 5 1
-	ssdk_sh cosmap pri2q set 6 1
-	ssdk_sh cosmap pri2q set 7 1
-	ssdk_sh cosmap pri2ehq set 0 0
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 0
-	ssdk_sh cosmap pri2ehq set 3 0
-	ssdk_sh cosmap pri2ehq set 4 1
-	ssdk_sh cosmap pri2ehq set 5 1
-	ssdk_sh cosmap pri2ehq set 6 1
-	ssdk_sh cosmap pri2ehq set 7 1
-}
-
-function create_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-
-	ssdk_sh acl list create 56 48
-	#action bypass eg stp check
-	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
-	if [ "$chip_ver" == "0x2000" ]; then
-		action="$action n n 0"
-	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		action="$action n n n 0"
-	else
-		action="$action 0"
-	fi
-
-	for ruleid in $( seq 0 2 )
-	do
-		if [ "$ruleid" == "0" ];then
-			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
-		elif [ "$ruleid" == "1" ];then
-			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		else
-			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		fi
-		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-			cmd="$cmd n $action"
-		else
-			cmd="$cmd $action"
-		fi
-		#echo $cmd
-		$cmd
-	done
-	ssdk_sh acl list bind 56 0 2 1
-}
-
-function delete_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		ssdk_sh acl list unbind $listid 0 1 $portmap
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule del $listid 0 1"
-				echo $cmd
-				$cmd
-			done
-		done
-		#echo "deleting list $listid"
-		ssdk_sh acl list destroy $listid
-	done
-}
-
-function delete_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 1
-	ssdk_sh cosmap pri2q set 3 1
-	ssdk_sh cosmap pri2q set 4 2
-	ssdk_sh cosmap pri2q set 5 2
-	ssdk_sh cosmap pri2q set 6 3
-	ssdk_sh cosmap pri2q set 7 3
-	ssdk_sh cosmap pri2ehq set 0 1
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 2
-	ssdk_sh cosmap pri2ehq set 3 2
-	ssdk_sh cosmap pri2ehq set 4 3
-	ssdk_sh cosmap pri2ehq set 5 3
-	ssdk_sh cosmap pri2ehq set 6 4
-	ssdk_sh cosmap pri2ehq set 7 5
-}
-
-function delete_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-	ssdk_sh acl list unbind 56 0 2 1
-	ssdk_sh acl rule del 56 0 1
-	ssdk_sh acl rule del 56 1 1
-	ssdk_sh acl rule del 56 2 1
-	ssdk_sh acl list destroy 56
-}
-
-function edma_war_config_add(){
-	create_war_cosmap
-	ssdk_sh acl status set enable
-	create_war_acl_rules
-}
-
-function edma_war_config_del(){
-	delete_war_acl_rules
-	delete_war_cosmap
-}
-
-function ipq50xx_serdes_monitor () {
-	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
-	port_id=2
-	old_linkstatus="DISABLE"
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set 29 0xb 0x300d
-		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-
-		while true
-		do
-			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
-			#when qca808x phy link status is from down to up, serdes tx would be enabled
-			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0xb00d
-				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
-			fi
-			#when qca808x phy link status is from up to down, serdes tx would be disabled
-			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0x300d
-				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-			fi
-			old_linkstatus=$cur_linkstatus
-		done
-	fi
-}
-
-function ipq53xx_phy_amplitude_set () {
-	#for qca808x phy sgmii, set half amplitude with src_half_swing register
-	port_id=2
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd180" ]; then
-		ssdk_sh debug phy set 5 0x40010087 0x208a
-		ssdk_sh debug phy set 6 0x40010087 0x208a
-		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
-		ampl_val=$(eval "ssdk_sh debug phy get 5 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 5 0x40010067 $ampl_val
-		ampl_val=$(eval "ssdk_sh debug phy get 6 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
-		ssdk_sh debug phy set 6 0x40010067 $ampl_val
-	fi
-}
-
-function ipq53xx_uniphy_amplitude_set () {
-	#for ipq50xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
-	ssdk_sh debug uniphy set 0 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 0 0x24 0 4
-	ssdk_sh debug uniphy set 1 0x7ac 0xb10d 4
-	ssdk_sh debug uniphy set 1 0x24 0 4
-}
-
-ssdk_dependency() {
-	counter=0
-	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
-		insmod qca-ssdk.ko
-	}
-	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
-	do
-		sleep 1
-		counter=$((counter+1))
-	done
-}
-
-start() {
-	ssdk_dependency
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to enable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_add
-		echo ''
-	fi
-	#The following commands should be uncommented to add acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#create_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	#The following commands should be uncommented to enable WAR for ipq50xx
-	chip_type_info=`cat tmp/sysinfo/model`
-	result=$(echo $chip_type_info | grep "IPQ5018")
-	if [ "$result" != "" ]; then
-		#ipq50xx_serdes_monitor &
-		#ipq50xx_uniphy_amplitude_set
-		#ipq50xx_phy_amplitude_set
-		echo ''
-	fi
-	if [ "$chip_ver" = "0x2001" ]; then
-		ipq53xx_uniphy_amplitude_set
-		ipq53xx_phy_amplitude_set
-		echo ''
-	fi
-	echo starting
-}
-
-stop() {
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to disable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_del
-		echo ''
-	fi
-	#The following commands should be uncommented to delete acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#delete_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	echo stoping
-}

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa50be/qca-ssdk

@@ -1,315 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
-# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
-#
-# Permission to use, copy, modify, and/or distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-
-START=16
-
-#!/bin/sh
-ruletype="ip4 ip6"
-side="wan lan"
-qwan="1 3 2 0 5 7 6 4"
-qlan="0 1 2 3 4 5 6 7"
-
-function create_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		#echo $queue
-		#echo "creating list $listid"
-		ssdk_sh acl list create $listid 255
-		ruleid=0
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
-				#echo $cmd
-				if [ "$rt" == "ip4" ];then
-					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				else
-					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
-					#echo $cmd
-				fi
-				if [ $ruleid -le 3 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				elif [ $ruleid -le 7 ];then
-					#zero dscp
-					cmd="$cmd n"
-				elif [ $ruleid -le 11 ];then
-					#non-zero dscp
-					cmd="$cmd y 0x0 0xff"
-				else
-					#zero dscp
-					cmd="$cmd n"
-				fi
-				p=$((ruleid/2))
-				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
-				#echo $cmd
-				$cmd
-				ruleid=`expr $ruleid + 1`
-			done
-		done
-		ssdk_sh acl list bind $listid 0 1 $portmap
-	done
-}
-
-function create_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 0
-	ssdk_sh cosmap pri2q set 3 0
-	ssdk_sh cosmap pri2q set 4 1
-	ssdk_sh cosmap pri2q set 5 1
-	ssdk_sh cosmap pri2q set 6 1
-	ssdk_sh cosmap pri2q set 7 1
-	ssdk_sh cosmap pri2ehq set 0 0
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 0
-	ssdk_sh cosmap pri2ehq set 3 0
-	ssdk_sh cosmap pri2ehq set 4 1
-	ssdk_sh cosmap pri2ehq set 5 1
-	ssdk_sh cosmap pri2ehq set 6 1
-	ssdk_sh cosmap pri2ehq set 7 1
-}
-
-function create_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-
-	ssdk_sh acl list create 56 48
-	#action bypass eg stp check
-	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
-	if [ "$chip_ver" == "0x2000" ]; then
-		action="$action n n 0"
-	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		action="$action n n n 0"
-	else
-		action="$action 0"
-	fi
-
-	for ruleid in $( seq 0 2 )
-	do
-		if [ "$ruleid" == "0" ];then
-			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
-		elif [ "$ruleid" == "1" ];then
-			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		else
-			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
-		fi
-		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-			cmd="$cmd n $action"
-		else
-			cmd="$cmd $action"
-		fi
-		#echo $cmd
-		$cmd
-	done
-	ssdk_sh acl list bind 56 0 2 1
-}
-
-function delete_war_acl_rules(){
-	for lw in $side
-	do
-		#echo $lw
-		if [ "$lw" == "wan" ];then
-			listid=254
-			queue=$qwan
-			portmap=0x20
-		else
-			listid=255
-			queue=$qlan
-			portmap=0x1e
-		fi
-		ssdk_sh acl list unbind $listid 0 1 $portmap
-		for rt in $ruletype
-		do
-			for qid in $queue
-			do
-				cmd="ssdk_sh acl rule del $listid 0 1"
-				echo $cmd
-				$cmd
-			done
-		done
-		#echo "deleting list $listid"
-		ssdk_sh acl list destroy $listid
-	done
-}
-
-function delete_war_cosmap(){
-	ssdk_sh cosmap pri2q set 0 0
-	ssdk_sh cosmap pri2q set 1 0
-	ssdk_sh cosmap pri2q set 2 1
-	ssdk_sh cosmap pri2q set 3 1
-	ssdk_sh cosmap pri2q set 4 2
-	ssdk_sh cosmap pri2q set 5 2
-	ssdk_sh cosmap pri2q set 6 3
-	ssdk_sh cosmap pri2q set 7 3
-	ssdk_sh cosmap pri2ehq set 0 1
-	ssdk_sh cosmap pri2ehq set 1 0
-	ssdk_sh cosmap pri2ehq set 2 2
-	ssdk_sh cosmap pri2ehq set 3 2
-	ssdk_sh cosmap pri2ehq set 4 3
-	ssdk_sh cosmap pri2ehq set 5 3
-	ssdk_sh cosmap pri2ehq set 6 4
-	ssdk_sh cosmap pri2ehq set 7 5
-}
-
-function delete_acl_byp_egstp_rules(){
-	chip_ver=$1
-	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
-	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		cmd="$cmd 0"
-	fi
-	#echo $cmd
-	$cmd
-	ssdk_sh acl list unbind 56 0 2 1
-	ssdk_sh acl rule del 56 0 1
-	ssdk_sh acl rule del 56 1 1
-	ssdk_sh acl rule del 56 2 1
-	ssdk_sh acl list destroy 56
-}
-
-function edma_war_config_add(){
-	create_war_cosmap
-	ssdk_sh acl status set enable
-	create_war_acl_rules
-}
-
-function edma_war_config_del(){
-	delete_war_acl_rules
-	delete_war_cosmap
-}
-
-function ipq50xx_serdes_monitor () {
-	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
-	port_id=2
-	old_linkstatus="DISABLE"
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set 29 0xb 0x300d
-		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-
-		while true
-		do
-			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
-			#when qca808x phy link status is from down to up, serdes tx would be enabled
-			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0xb00d
-				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
-			fi
-			#when qca808x phy link status is from up to down, serdes tx would be disabled
-			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
-				ssdk_sh debug phy set 29 0xb 0x300d
-				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
-			fi
-			old_linkstatus=$cur_linkstatus
-		done
-	fi
-}
-
-function ipq53xx_phy_amplitude_set () {
-	#PHY (8081->5321): Full amplitude (bit[7:5]=000), half swing (bit[4]=1)
-	#for qca808x phy sgmii, set half amplitude with src_half_swing register
-	port_id=2
-	phy_addr=0x1d
-	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
-	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
-		ssdk_sh debug phy set $phy_addr 0x40010087 0x208a
-		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
-		ampl_val=$(ssdk_sh debug phy get $phy_addr 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/')
-		ssdk_sh debug phy set $phy_addr 0x40010067 $ampl_val
-	fi
-}
-
-function ipq53xx_uniphy_amplitude_set () {
-        #UniPhy (5321->8081): Custom amplitude (bit[8:4]=21) = 0xb15d
-	#for ipq53xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
-	ssdk_sh debug uniphy set 1 0x7ac 0xb15d 4
-	ssdk_sh debug uniphy set 1 0x24 0 4
-}
-
-ssdk_dependency() {
-	counter=0
-	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
-		insmod qca-ssdk.ko
-	}
-	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
-	do
-		sleep 1
-		counter=$((counter+1))
-	done
-}
-
-start() {
-	ssdk_dependency
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to enable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_add
-		echo ''
-	fi
-	#The following commands should be uncommented to add acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#create_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	#The following commands should be uncommented to enable WAR for ipq50xx
-	chip_type_info=`cat tmp/sysinfo/model`
-	result=$(echo $chip_type_info | grep "IPQ5018")
-	if [ "$result" != "" ]; then
-		#ipq50xx_serdes_monitor &
-		#ipq50xx_uniphy_amplitude_set
-		#ipq50xx_phy_amplitude_set
-		echo ''
-	fi
-	if [ "$chip_ver" = "0x2001" ]; then
-		ipq53xx_uniphy_amplitude_set
-		ipq53xx_phy_amplitude_set
-		echo ''
-	fi
-	echo starting
-}
-
-stop() {
-	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
-	#The following commands should be uncommented to disable EDMA WAR
-	if [ "$chip_ver" = "0x1401" ]; then
-		#edma_war_config_del
-		echo ''
-	fi
-	#The following commands should be uncommented to delete acl egress stp bypass rules
-	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
-		#delete_acl_byp_egstp_rules $chip_ver
-		echo ''
-	fi
-	echo stoping
-}

feeds/qca-wifi-7/qca-ssdk-qca/patches-zyxel_nwa50be/0001-pinctrl-make-the-switch-LED-works.patch

@@ -1,47 +0,0 @@
-From 7fa9e9b683f1c573c58a14755347988919bc7d06 Mon Sep 17 00:00:00 2001
-From: YenLin Pan <yenlin.pan@zyxel.com.tw>
-Date: Wed, 14 May 2025 13:47:06 +0800
-Subject: [PATCH] pinctrl: make the switch LED works
-
-Enable switch LED pin definition for LED0/LED1/LED2 control
-
-Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
----
- src/init/ssdk_mht_pinctrl.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/src/init/ssdk_mht_pinctrl.c b/src/init/ssdk_mht_pinctrl.c
-index 2debe59..1ae0002 100755
---- a/src/init/ssdk_mht_pinctrl.c
-+++ b/src/init/ssdk_mht_pinctrl.c
-@@ -33,11 +33,17 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
-     /*PINs default MUX Setting*/
-     MHT_PIN_SETTING_MUX(0,  MHT_PIN_FUNC_INTN_WOL),
-     MHT_PIN_SETTING_MUX(1,  MHT_PIN_FUNC_INTN),
--#if 0
-+#if 1
-     MHT_PIN_SETTING_MUX(2,  MHT_PIN_FUNC_P0_LED_0),
-     MHT_PIN_SETTING_MUX(3,  MHT_PIN_FUNC_P1_LED_0),
-     MHT_PIN_SETTING_MUX(4,  MHT_PIN_FUNC_P2_LED_0),
-     MHT_PIN_SETTING_MUX(5,  MHT_PIN_FUNC_P3_LED_0),
-+    MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_P0_LED_2),
-+    MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_P1_LED_2),
-+    MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_P2_LED_2),
-+    MHT_PIN_SETTING_MUX(9,  MHT_PIN_FUNC_P3_LED_2),
-+#endif
-+#if 0
-     MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_PPS_IN),
-     MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_TOD_IN),
-     MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_RTC_REFCLK_IN),
-@@ -49,7 +55,7 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
-     MHT_PIN_SETTING_MUX(13, MHT_PIN_FUNC_P0_TOD_OUT),
-     MHT_PIN_SETTING_MUX(14, MHT_PIN_FUNC_P0_CLK125_TDI),
-     MHT_PIN_SETTING_MUX(15, MHT_PIN_FUNC_P0_SYNC_CLKO_PTP),
--#if 0
-+#if 1
-     MHT_PIN_SETTING_MUX(16, MHT_PIN_FUNC_P0_LED_1),
-     MHT_PIN_SETTING_MUX(17, MHT_PIN_FUNC_P1_LED_1),
-     MHT_PIN_SETTING_MUX(18, MHT_PIN_FUNC_P2_LED_1),
--- 
-2.34.1
-

feeds/tip/certificates/files/etc/init.d/early_boot

@@ -20,16 +20,10 @@ copy_certificates() {
 	[ -z "$country" ] && country=US
 	echo "options cfg80211 ieee80211_regdom="$country > /etc/modules.conf 
 	echo -n $country > /etc/ucentral/country
-	sync
 	exit 0
 }
 
 boot() {
-	case "$(board_name)" in
-	sonicfi,rap6*)
-		touch /tmp/squashfs
-	;;
-	esac
 	[ -f /etc/ucentral/key.pem ] && return
 	/usr/bin/mount_certs
 	copy_certificates

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -6,16 +6,13 @@ check_certificates() {
 
 check_certificates
 
-tar_part_lookup() {
-	part="$(fw_printenv -n cert_part)"
-	if [ "$part" -eq 0 ]; then
-		echo "$2"
-		part=1
-	else
-		echo "$1"
-		part=0
-	fi
-	fw_setenv cert_part $part
+bootconfig_lookup() {
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG"
+		;;
+	1)	echo "0:BOOTCONFIG1"
+		;;
+	esac
 }
 
 . /lib/functions.sh
@@ -37,29 +34,12 @@ sonicfi,rap7*)
 		mtd=$(find_mtd_index certificates)
 		[ -n "$mtd" ] && mount -t ext4 /dev/mtdblock$mtd /certificates
 	fi
-	;;
-sonicfi,rap6*)
-	mtd=$(find_mtd_index certificates)
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /mnt
-		cp /mnt/* /certificates
-		umount /mnt
-	fi
-		mtd=$(find_mtd_index devinfo)
-		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
-	;;
-udaya,a5-id2|\
-yuncore,ax820)
-	mtd=$(find_mtd_index certificates)
-	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
-		mount -t squashfs /dev/mtdblock$mtd /mnt
-		cp /mnt/* /certificates
-		umount /mnt
-	fi
-	part=$(tar_part_lookup "insta1" "insta2")
-	if [ -n "insta" ]; then
-		mtd=$(find_mtd_index $part)
-		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
+	if [ ! -f /certificates/cert.pem ] || [ ! -f /certificates/key.pem ]; then
+		bootconfig=$(bootconfig_lookup)
+		if [ -n "$bootconfig" ]; then
+			mmc_dev=$(echo $(find_mmc_part "$bootconfig") | sed 's/^.\{5\}//')
+			[ -n "$mmc_dev" ] && tar xf /dev/$mmc_dev -C /certificates
+		fi
 	fi
 	;;
 *)

feeds/tip/certificates/files/usr/bin/store_certs

@@ -1,36 +1,25 @@
 #!/bin/sh
 
-tar_part_lookup() {
-	part="$(fw_printenv -n cert_part)"
-	if [ "$part" -eq 0 ]; then
-		echo "$2"
-		part=1
-	else
-		echo "$1"
-		part=0
-	fi
-	fw_setenv cert_part $part
+bootconfig_lookup() {
+	bootconfig="$(fw_printenv -n cert_part)"
+	case "$(fw_printenv -n cert_part)" in
+	0)	echo "0:BOOTCONFIG1"
+		bootconfig=1
+		;;
+	*)	echo "0:BOOTCONFIG"
+		bootconfig=0
+		;;
+	esac
+	fw_setenv cert_part $bootconfig
 }
 
 . /lib/functions.sh
 case "$(board_name)" in
-udaya,a5-id2|\
-yuncore,ax820)
+sonicfi,rap7110c-341x)
 	cd /certificates
-	tar cf /tmp/certs.tar .
-	part=$(tar_part_lookup "insta1" "insta2")
-	mtd=$(find_mtd_index $part)
-	dd if=/tmp/certs.tar of=/dev/mtdblock$mtd
-	;;
-sonicfi,rap6*)
-	if [ "$(fw_printenv -n store_certs_disabled)" != "1" ]; then
-		cd /certificates
-		tar cf /tmp/certs.tar .
-		mtd=$(find_mtd_index devinfo)
-		block_size=$(cat /sys/class/mtd/mtd$mtd/size)
-		dd if=/tmp/certs.tar of=/tmp/certs_pad.tar bs=$block_size conv=sync
-		mtd write /tmp/certs_pad.tar /dev/mtd$mtd
-		rm -f /tmp/certs.tar /tmp/certs_pad.tar
-	fi
+	tar cf /tmp/certs.tar
+	bootconfig=$(bootconfig_lookup)
+	mmc_dev=$(echo $(find_mmc_part $bootconfig) | sed 's/^.\{5\}//')
+	dd if=/tmp/certs.tar of=/dev/$bootconfig
 	;;
 esac

feeds/tip/cloud_discovery/files/etc/init.d/cloud_discover

@@ -22,19 +22,6 @@ start_service() {
 	[ "$valid" == "true" ] || 
 		/usr/share/ucentral/ucentral.uc /etc/ucentral/ucentral.cfg.0000000001 > /dev/null
 
-	est_client check
-	[ $? -eq 1 ] && {
-		logger ERROR
-		logger ERROR
-		logger ERROR
-		logger The certificate used has a CN that does not match the serial of the device
-		echo The certificate used has a CN that does not match the serial of the device
-		logger ERROR
-		logger ERROR
-		logger ERROR
-		return
-	}
-
 	procd_open_instance
 	procd_set_param command "$PROG"
 	procd_set_param respawn

feeds/tip/cloud_discovery/files/usr/bin/cloud_discovery

@@ -15,14 +15,9 @@ const ONLINE = 2;
 const OFFLINE = 3;
 const ORPHAN = 4;
 
-const DISCOVER_DHCP = "DHCP";
-const DISCOVER_FLASH = "FLASH";
-const DISCOVER_LOOKUP = "OpenLAN";
-
 let ubus = libubus.connect();
 let uci = libuci.cursor();
 let state = DISCOVER;
-let discovery_method = "";
 let validate_time;
 let offline_time;
 let orphan_time;
@@ -32,8 +27,6 @@ let timeouts = {
 	'validate': 120,
 	'orphan': 2 * 60 * 60,
 	interval: 10000,
-	expiry_interval: 60 * 60 * 1000,
-	expiry_threshold: 1 * 365 * 24 * 60 * 60,
 };
 
 ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "cloud_discover");
@@ -42,24 +35,6 @@ ulog(LOG_INFO, 'Start\n');
 
 uloop.init();
 
-let cds_server = 'discovery.open-lan.org';
-
-function detect_certificate_type() {
-	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
-	let issuer = pipe.read("all");
-	pipe.close();
-
-	if (match(issuer, /OpenLAN Demo Birth CA/)) {
-		ulog(LOG_INFO, 'Certificate type is "Demo" \n');
-		cds_server = 'discovery-qa.open-lan.org';
-		timeouts.expiry_threshold = 3 * 24 * 60 * 60;
-	} else if (match(issuer, /OpenLAN Birth Issuing CA/)) {
-		ulog(LOG_INFO, 'Certificate type is "Production"\n');
-	} else {
-		ulog(LOG_INFO, 'Certificate type is "TIP"\n');
-	}
-}
-
 function readjsonfile(path) {
 	let file = fs.readfile(path);
 	if (file)
@@ -101,14 +76,6 @@ function gateway_load() {
 	return readjsonfile('/etc/ucentral/gateway.json');
 }
 
-function discovery_state_write() {
-	let discovery_state = {
-		"type": discovery_method,
-		"updated": time()
-	};
-	fs.writefile('/etc/ucentral/discovery.state.json', discovery_state);
-}
-
 function gateway_write(data) {
 	let gateway = gateway_load();
 	gateway ??= {};
@@ -122,10 +89,8 @@ function gateway_write(data) {
 		if (new[key] != gateway[key])
 			changed = true;
 	}
-	if (changed) {
+	if (changed)
 		fs.writefile('/etc/ucentral/gateway.json', new);
-		system('sync');
-	}
 	return changed;
 }
 
@@ -162,7 +127,6 @@ function set_state(set) {
 		if (prev == VALIDATING) {
 			ulog(LOG_INFO, 'Setting cloud controller to validated\n');
 			gateway_write({ valid: true });
-			discovery_state_write();
 		}
 		break;
 
@@ -197,7 +161,7 @@ function redirector_lookup() {
 	let serial = uci.get('system', '@system[-1]', 'mac');
 
 	fs.unlink(path);
-	system(`curl -k --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/operational.ca https://${cds_server}/v1/devices/${serial} --output /tmp/ucentral.redirector`);
+	system(`curl -k --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/operational.ca https://openlan.keys.tip.build/v1/devices/${serial} --output /tmp/ucentral.redirector`);
 	if (!fs.stat(path))
 		return;
 	let redir = readjsonfile(path);
@@ -260,18 +224,15 @@ function interval_handler() {
 		if (!time_is_valid())
 			return;
 
-		discovery_method = DISCOVER_DHCP;
 		if (discover_dhcp())
 			return;
 
 		if (system('/usr/bin/est_client enroll'))
 			return;
 
-		discovery_method = DISCOVER_FLASH;
 		if (!discover_flash())
 			return;
 
-		discovery_method = DISCOVER_LOOKUP;
 		redirector_lookup();
 		break;
 
@@ -291,36 +252,6 @@ function interval_handler() {
 	}
 }
 
-function trigger_reenroll() {
-	ulog(LOG_INFO, 'triggering reenroll\n');
-
-	if (system('/usr/bin/est_client reenroll')) {
-		ulog(LOG_INFO, 'reenroll failed\n');
-		return;
-	}
-	
-	ulog(LOG_INFO, 'reenroll succeeded\n');
-	ulog(LOG_INFO, 'stopping client\n');
-	
-	system('/etc/init.d/ucentral stop');
-	set_state(DISCOVER);
-}
-
-function expiry_handler() {
-	let stat = fs.stat('/etc/ucentral/operational.ca');
-	if (!stat)
-		return;
-
-	let ret = system(`openssl x509 -checkend ${timeouts.expiry_threshold} -noout -in /certificates/operational.pem`);
-	if (!ret) {
-		ulog(LOG_INFO, 'checked certificate expiry - all ok\n');
-		return;
-	}
-
-	ulog(LOG_INFO, 'certificate will expire soon\n');
-	trigger_reenroll();
-}
-
 let ubus_methods = {
 	discover: {
 		call: function(req) {
@@ -395,17 +326,8 @@ let ubus_methods = {
 		},
 		args: {},
 	},
-	reenroll: {
-		call: function(req) {
-			trigger_reenroll();
-			return 0;
-		},
-		args: {},
-	},
 };
 
-detect_certificate_type();
-
 if (gateway_available()) {
 	let status = ubus.call('ucentral', 'status');
 	ulog(LOG_INFO, 'cloud is known\n');
@@ -422,7 +344,6 @@ if (gateway_available()) {
 timeouts_load();
 
 interval = uloop.interval(timeouts.interval, interval_handler);
-uloop.interval(timeouts.expiry_interval, expiry_handler);
 
 ubus.publish('cloud', ubus_methods);
 

feeds/tip/cloud_discovery/files/usr/bin/est_client

@@ -4,28 +4,12 @@
 
 import { ulog_open, ulog, ULOG_SYSLOG, ULOG_STDIO, LOG_DAEMON, LOG_INFO } from 'log';
 import * as fs from 'fs';
-import * as libuci from 'uci';
 
 let store_operational_pem = false;
 let store_operational_ca = false;
-let est_server = 'est.certificates.open-lan.org';
+let est_server = 'qaest.certificates.open-lan.org:8001';
 let cert_prefix = 'operational';
 
-function set_est_server() {
-	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
-	let issuer = pipe.read("all");
-	pipe.close();
-
-	if (match(issuer, /OpenLAN Demo Birth CA/)) {
-		ulog(LOG_INFO, 'Certificate type is "Demo" \n');
-		est_server = 'qaest.certificates.open-lan.org:8001';
-	} else if (match(issuer, /OpenLAN Birth Issuing CA/)) {
-		ulog(LOG_INFO, 'Certificate type is "Production"\n');
-	} else {
-		ulog(LOG_INFO, 'Certificate type is "TIP"\n');
-	}
-}
-
 if (getenv('EST_SERVER'))
 	est_server = getenv('EST_SERVER');
 
@@ -94,8 +78,6 @@ function call_est_server(path, cert, target) {
 	if (generate_csr(cert))
 		return 1;
 
-	set_est_server();	
-
 	let ret = system('curl -m 10 -X POST https://' + est_server + '/.well-known/est/' + path + ' -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert ' + cert + ' --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
 	if (ret) {
 		ulog(LOG_INFO, 'Failed to request operational certificate\n');
@@ -143,9 +125,6 @@ function load_operational_ca() {
 		ulog(LOG_INFO, 'Operational CA is present\n');
 		return 0;
 	}
-
-	set_est_server();	
-
 	let ret = system('curl -m 10 -X GET https://' + est_server + '/.well-known/est/cacerts --cert /etc/ucentral/' + cert_prefix + '.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/' + cert_prefix + '.ca.nohdr.p7');
 	if (!ret)
 		ret = p7_too_pem('/tmp/' + cert_prefix + '.ca.nohdr.p7', '/etc/ucentral/' + cert_prefix + '.ca');
@@ -160,14 +139,11 @@ function load_operational_ca() {
 }
 
 function fwtool() {
-	if (!fs.stat('/etc/ucentral/cert.pem'))
-		return 0;
-
 	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
 	let issuer = pipe.read("all");
 	pipe.close();
 
-	if (!(match(issuer, /OpenLAN/) && match(issuer, /Birth/)))
+	if (!(match(issuer, /OpenLAN/) && match(issuer, /Birth CA/)))
 		return 0;
 
 	ulog(LOG_INFO, 'The issuer is insta\n');
@@ -187,20 +163,6 @@ function fwtool() {
 	return 0;
 }
 
-function check_cert() {
-	if (!fs.stat('/etc/ucentral/cert.pem'))
-		return 0;
-	let pipe = fs.popen("openssl x509 -in /etc/ucentral/cert.pem  -noout -subject -nameopt multiline | grep commonName | awk '{ print $3 }'");
-	let cn = pipe.read("all");
-	pipe.close();
-	if (!cn)
-		return 0;
-	cn = lc(trim(cn));
-	let uci = libuci.cursor();
-	let serial = uci.get('ucentral', 'config', 'serial');
-	return cn != serial;
-}
-
 switch(ARGV[0]) {
 case 'enroll':
 	let ret = simpleenroll();
@@ -222,7 +184,4 @@ case 'reenroll':
 
 case 'fwtool':
 	exit(fwtool());
-
-case 'check':
-	exit(check_cert());
 }

feeds/tip/cloud_discovery/files/usr/share/ucentral/cloud_discovery.uc

@@ -5,8 +5,8 @@ import * as fs from 'fs';
 
 let cmd = ARGV[0];
 let ifname = getenv("interface");
-let opt138 = fs.readfile('/tmp/dhcp-option-138');
-let opt224 = fs.readfile('/tmp/dhcp-option-224');
+let opt224 = getenv("opt138");
+let opt224 = getenv("opt224");
 
 if (cmd != 'bound' && cmd != 'renew')
 	exit(0);
@@ -23,14 +23,14 @@ let cloud = {
 	lease: true,
 };
 if (opt138) {
-	let dhcp = opt138;
+	let dhcp = hexdec(opt138);
 	dhcp = split(dhcp, ':');
 	cloud.dhcp_server = dhcp[0];
 	cloud.dhcp_port = dhcp[1] ?? 15002;
 	cloud.no_validation = true;
 }
 if (opt224) {
-	let dhcp = opt224;
+	let dhcp = hexdec(opt224);
 	dhcp = split(dhcp, ':');
 	cloud.dhcp_server = dhcp[0];
 	cloud.dhcp_port = dhcp[1] ?? 15002;

feeds/tip/tip-defaults/files/etc/ucentral/insta.pem

@@ -4,6 +4,3 @@ MIIFajCCA1KgAwIBAgICDnowDQYJKoZIhvcNAQELBQAwHzEdMBsGA1UEAwwUT3BlbkxBTiBEZW1vIFJv
 -----BEGIN CERTIFICATE-----
 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
 -----END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-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
------END CERTIFICATE-----

feeds/ucentral/ratelimit/files/usr/bin/ratelimit

@@ -350,7 +350,7 @@ function run_service() {
 				printf('-> reload\n');
 				let list = uctx.list();
 				for (let obj in list) {
-					if (!wildcard(obj, 'hostapd.wlan*') && !wildcard(obj, 'hostapd.phy*'))
+					if (!wildcard(obj, 'hostapd.wlan*'))
 						continue;
 					let iface = split(obj, '.')[1];
 					let device = get_device(devices, req.args.device);

feeds/ucentral/rrmd/files/etc/init.d/rrmd

@@ -6,8 +6,6 @@ STOP=01
 USE_PROCD=1
 
 start_service() {
-	[ -e "/tmp/rrm_timestamp" ] && rm -rf /tmp/rrm_timestamp
-	[ -e "/tmp/rrm_chan_switch" ] && rm -rf /tmp/rrm_chan_switch
 	rm -rf /tmp/threshold_breach_count*
 	rm -rf /tmp/fixed_channel*
 	rm -rf /tmp/chanutil_phy*

feeds/ucentral/rrmd/files/usr/share/rrmd/policy_chanutil.uc

@@ -24,10 +24,6 @@ function stats_info_write(path, value) {
 	file.close();
 }
 
-function record_rrm_timestamp() {
-    stats_info_write("/tmp/rrm_timestamp", time());
-}
-
 // total number of radios: default=2
 let num_radios = 2;
 let phy_count;
@@ -140,122 +136,20 @@ function channel_to_freq(band, channel) {
     return freq;
 }
 
-// using mapping to get correct center channel, especially for 6G radio
-function get_center_channel(channel, band, bw) {
-    let center_channel = channel;
-    let center_channel_map = {};
+function center_freq_calc(band, freq, bandwidth) {
+    if (bandwidth == 40)
+        return +freq + 10;
+    if (bandwidth == 80)
+        return +freq + 30;
+    if (bandwidth == 160)
+        return +freq + 70;
+    if (bandwidth == 320)
+        if (freq == 6115)
+            return +freq - 10;
+        else
+            return +freq + 150;
 
-    switch (band) {
-    case '5g':
-        if (bw == 40) {
-            center_channel_map = {
-                "36": 38, "40": 38,
-                "44": 46, "48": 46,
-                "52": 54, "56": 54,
-                "60": 62, "64": 62,
-                "100": 102, "104": 102,
-                "108": 110, "112": 110,
-                "116": 118, "120": 118,
-                "124": 126, "128": 126,
-                "132": 134, "136": 134,
-                "140": 142, "144": 142,
-                "149": 151, "153": 151,
-                "157": 159, "161": 159,
-                "165": 167
-            };
-        } else if (bw == 80) {
-            center_channel_map = {
-                "36": 42, "40": 42, "44": 42, "48": 42,
-                "52": 58, "56": 58, "60": 58, "64": 58,
-                "100": 106, "104": 106, "108": 106, "112": 106,
-                "116": 122, "120": 122, "124": 122, "128": 122,
-                "132": 138, "136": 138, "140": 138, "144": 138,
-                "149": 155, "153": 155, "157": 155, "161": 155,
-                "165": 171
-            };
-        } else if (bw == 160) {
-            center_channel_map = {
-                "36": 50, "40": 50, "44": 50, "48": 50,
-                "52": 50, "56": 50, "60": 50, "64": 50,
-                "100": 114, "104": 114, "108": 114, "112": 114,
-                "116": 114, "120": 114, "124": 114, "128": 114
-            };
-        }
-        break;
-    case '6g':
-        if (bw == 40) {
-            center_channel_map = {
-                "1": 3, "5": 3, "9": 11, "13": 11,
-                "17": 19, "21": 19, "25": 27, "29": 27,
-                "33": 35, "37": 35, "41": 43, "45": 43,
-                "49": 51, "53": 51, "57": 59, "61": 59,
-                "65": 67, "69": 67, "73": 75, "77": 75,
-                "81": 83, "85": 83, "89": 91, "93": 91,
-                "97": 99, "101": 99, "105": 107, "109": 107,
-                "113": 115, "117": 115, "121": 123, "125": 123,
-                "129": 131, "133": 131, "137": 139, "141": 139,
-                "145": 147, "149": 147, "153": 155, "157": 155,
-                "161": 163, "165": 163, "169": 171, "173": 171,
-                "177": 179, "181": 179, "185": 187, "189": 187,
-                "193": 195, "197": 195, "201": 203, "205": 203,
-                "209": 211, "213": 211, "217": 219, "221": 219,
-                "225": 227
-            };
-        } else if (bw == 80) {
-            center_channel_map = {
-                "1": 7, "5": 7, "9": 7, "13": 7,
-                "17": 23, "21": 23, "25": 23, "29": 23,
-                "33": 39, "37": 39, "41": 39, "45": 39,
-                "49": 55, "53": 55, "57": 55, "61": 55,
-                "65": 71, "69": 71, "73": 71, "77": 71,
-                "81": 87, "85": 87, "89": 87, "93": 87,
-                "97": 103, "101": 103, "105": 103, "109": 103,
-                "113": 119, "117": 119, "121": 119, "125": 119,
-                "129": 135, "133": 135, "137": 135, "141": 135,
-                "145": 151, "149": 151, "153": 151, "157": 151,
-                "161": 167, "165": 167, "169": 167, "173": 167,
-                "177": 183, "181": 183, "185": 183, "189": 183,
-                "193": 199, "197": 199, "201": 199, "205": 199,
-                "209": 215
-            };
-        } else if (bw == 160) {
-            center_channel_map = {
-                "1": 15, "5": 15, "9": 15, "13": 15,
-                "17": 15, "21": 15, "25": 15, "29": 15,
-                "33": 47, "37": 47, "41": 47, "45": 47,
-                "49": 47, "53": 47, "57": 47, "61": 47,
-                "65": 79, "69": 79, "73": 79, "77": 79,
-                "81": 79, "85": 79, "89": 79, "93": 79,
-                "97": 111, "101": 111, "105": 111, "109": 111,
-                "113": 111, "117": 111, "121": 111, "125": 111,
-                "129": 143, "133": 143, "137": 143, "141": 143,
-                "145": 143, "149": 143, "153": 143, "157": 143,
-                "161": 175, "165": 175, "169": 175, "173": 175,
-                "177": 175, "181": 175, "185": 175, "189": 175,
-                "193": 207
-            };
-        } else if (bw == 320) {
-            center_channel_map = {
-                "1": 31, "5": 31, "9": 31, "13": 31,
-                "17": 31, "21": 31, "25": 31, "29": 31,
-                "33": 63, "37": 63, "41": 63, "45": 63,
-                "49": 63, "53": 63, "57": 63, "61": 63,
-                "65": 63, "69": 63, "73": 63, "77": 63,
-                "81": 63, "85": 63, "89": 63, "93": 63,
-                "97": 127, "101": 127, "105": 127, "109": 127,
-                "113": 127, "117": 127, "121": 127, "125": 127,
-                "129": 127, "133": 127, "137": 127, "141": 127,
-                "145": 127, "149": 127, "153": 127, "157": 127,
-                "161": 191
-            };
-        }
-        break;
-    }
-
-    if (center_channel_map[channel])
-        center_channel = center_channel_map[channel];
-
-    return center_channel;
+    return +freq;
 }
 
 function interface_status_check(iface) {
@@ -307,9 +201,6 @@ function check_current_channel(iface) {
 function hostapd_switch_channel(msg) {
     ulog_info(`[%s] Start switch channel to %d \n`, msg.iface, msg.channel);
 
-    // Channel switch in progress, set flag = 1
-    stats_info_write("/tmp/rrm_chan_switch", 1);
-
     let chan_switch_status = 0;
     let sec_channel_offset = null;
 
@@ -317,8 +208,7 @@ function hostapd_switch_channel(msg) {
     let bandwidth = replace(msg.htmode, /[^0-9]/g, '');
 
     let target_freq = channel_to_freq(msg.band, msg.channel);
-    let center_channel = get_center_channel(msg.channel, msg.band, bandwidth);
-    let center_freq = channel_to_freq(msg.band, center_channel);
+    let center_freq = center_freq_calc(msg.band, target_freq, bandwidth);
     if (bandwidth > 20)
         sec_channel_offset = 1;
 
@@ -355,20 +245,9 @@ function switch_status_check(iface, dfs_enabled_5g_flag) {
         ulog_info(`[%s] 5G radio might need some time to be UP (DFS enabled) \n`, iface);
 
         let p = 0;
-        // Default max 70 seconds wait for the DFS enabled interface to be UP
+        // Max 65 seconds wait for the DFS enabled interface to be UP
         let timer = 70;
 
-        // get real timer from hostapd_cli command
-        let check_cac_time = sprintf('hostapd_cli -i %s status | grep \"cac_time_left_seconds\" | awk -F "=" \'{print $2}\'', iface);
-        let _cac_time = fs.popen(check_cac_time);
-        let cac_time = trim(_cac_time.read('all'));
-        _cac_time.close();
-
-        // if cac_time is a valid number, set timer to cac_time + 5 seconds
-        if (cac_time > 0 && match(cac_time, /^[0-9]+$/)) {
-            timer = int(cac_time) + 5;
-        }
-
         while (p < timer) {
             ulog_info(`[%s] Check#%d \n `, iface, p);
 
@@ -388,9 +267,6 @@ function switch_status_check(iface, dfs_enabled_5g_flag) {
         }
     }
 
-    // Channel switch done, set flag = 0
-    stats_info_write("/tmp/rrm_chan_switch", 0);
-
     let current_chan = check_current_channel(iface);
     return current_chan;
 }
@@ -560,7 +436,7 @@ function random_channel_selection(iface, band, htmode, chan_list_valid) {
     ulog_info(`[%s] Selected channel list from config (default channel list shall be used in case channels haven't been selected) = %s \n`, iface, (chan_list_valid || '[]'));
 
     if (band == '2g' && bw >= 40) {
-        ulog_info(`[%s] It is highly recommended to NOT use %dMHz bandwidth for 2.4G radio (RRM will not work properly) \n`, iface, bw);
+        ulog_info(`[%s] It is highly recommended to NOT use %dMHz bandwidth for 2.4G radio \n`, iface, bw);
     } else if (band == '5g' && bw > 160) {
         ulog_info(`[%s] %dMHz bandwidth not supported for 5G radio. Please use a bandwidth of 160MHz or lower\n`, iface, bw);
     }
@@ -692,28 +568,9 @@ function random_channel_selection(iface, band, htmode, chan_list_valid) {
     return random_channel;
 }
 
-function check_center_channel(chosen_random_channel, current_channel, band, htmode) {
-    let ret = false;
-    let bw = replace(htmode, /[^0-9]/g, '');
-
-    if (band != '2g' || bw != 20) {
-        // for 2G band or 20MHz bandwidth, center channel is the same as the channel
-        let chosen_random_channel_center = get_center_channel(chosen_random_channel, band, bw);
-        let current_channel_center = get_center_channel(current_channel, band, bw);
-
-        ulog_info(`Center channel of the chosen random channel (%d) = %d; Center channel of the current channel (%d) = %d \n`, chosen_random_channel, chosen_random_channel_center, current_channel, current_channel_center);
-
-        if (chosen_random_channel_center == current_channel_center)
-            ret = true;
-    }
-
-    return ret;
-}
-
 function algo_rcs(iface, current_channel, band, htmode, selected_channels) {
     let chosen_random_channel = 0;
     let res = 0;
-    let same_center_channel = false;
 
     // random_channel_selection script will help to select random channel
     chosen_random_channel = random_channel_selection(iface, band, htmode, selected_channels);
@@ -723,15 +580,8 @@ function algo_rcs(iface, current_channel, band, htmode, selected_channels) {
         ulog_info(`[%s] RCS assigned the same channel = %d; Skip channel switch \n`, iface, chosen_random_channel);
         res = 0;
     } else if (chosen_random_channel > 0) {
-        // check if the random channel has the same center channel as the current channel
-        same_center_channel = check_center_channel(chosen_random_channel, current_channel, band, htmode);
-        if (same_center_channel) {
-            ulog_info(`[%s] RCS found channel %d with the same center channel as current channel %d; Skip channel switch \n`, iface, chosen_random_channel, current_channel);
-            res = 0;
-        } else {
-            ulog_info(`[%s] RCS done ... random channel found = %d\n`, iface, chosen_random_channel);
-            res = 1;
-        }
+        ulog_info(`[%s] RCS done ... random channel found = %d\n`, iface, chosen_random_channel);
+        res = 1;
     } else {
         ulog_info(`[%s] RCS scan FAIL. Retry Channel optimization at next cycle \n`, iface);
         res = 0;
@@ -761,8 +611,6 @@ function channel_optimize() {
         return config.interval;
     }
 
-    record_rrm_timestamp();
-
     let current_rf_down = {};
 	let cool_down_f = {};
     let check_all_cool_down = 0;
@@ -1076,7 +924,7 @@ function channel_optimize() {
                             }
                         } else {
                             // revert back to the original channel
-                            ulog_info(`[%s] Channel %d may have a cac_time longer than 60 seconds, RRM failed for this interval (you might want to avoid selecting this channel) \n`, radio_iface[l], init_payload.channel);
+                            ulog_info(`[%s] Channel %d has a cac_time longer than 60 seconds, RRM failed for this interval (you might want to avoid selecting this channel) \n`, radio_iface[l], init_payload.channel);
                         }
                     } else if (selected_algo == "ACS") {
                         let random_wait_time = random_time_calc();
@@ -1092,9 +940,6 @@ function channel_optimize() {
                             check_all_threshold_breach >= 1: threshold breach count exceeded for one or more interfaces
                         */
 
-                        // Channel switch in progress, set flag = 1
-                        stats_info_write("/tmp/rrm_chan_switch", 1);
-
                         // flag to check if 5G radio was restarted
                         let radio_5g_restarted = 0;
 
@@ -1158,10 +1003,6 @@ function channel_optimize() {
                             sleep(30000);
                         }
                     }
-
-                    sleep(5000);
-                    // Channel switch done, set flag = 0
-                    stats_info_write("/tmp/rrm_chan_switch", 0);
                 } else {
                     if (threshold_breach_f[l] != 1) {
                         ulog_info(`[%s] Threshold breach count (=%d) < Allowed consecutive Channel Utilization threshold breach count (=%d), will be checked again in the next interval \n`, radio_iface[l], threshold_breach_count[l], config.consecutive_threshold_breach);
@@ -1175,7 +1016,6 @@ function channel_optimize() {
         }
     }
     ulog_info(`RRM with channel optimization finished; next RRM round starts in %d seconds \n`, config.interval/1000);
-    record_rrm_timestamp();
 
     return config.interval;
 }

feeds/ucentral/rtty/files/rtty.init

@@ -51,7 +51,7 @@ start_rtty() {
 	procd_set_param command $BIN -h $host -I "$id" -a
 	[ -n "$port" ] && procd_append_param command -p "$port"
 	[ -n "$description" ] && procd_append_param command -d "$description"
-	[ "$ssl" = "1" ] && procd_append_param command -s -c /etc/ucentral/operational.pem -k /etc/ucentral/key.pem
+	[ "$ssl" = "1" ] && procd_append_param command -s -c /etc/ucentral/cert.pem -k /etc/ucentral/key.pem
 	[ -n "$token" ] && procd_append_param command -t "$token"
 	[ "$verbose" = "1" ] && procd_append_param command -v
 	[ "$timeout" -eq "0" ] || procd_append_param command -e $timeout

feeds/ucentral/ucentral-client/Makefile

@@ -4,9 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
+PKG_MIRROR_HASH:=2e28e0aa61b74851c7daf3634ec34d303a603e881e6c5d1fd76c837dea527582
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-08-11
-PKG_SOURCE_VERSION:=549e84e5fea7230c5471d6a3dbddcc7d3152f665
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=69829f63ea172ce9bd19b7b02073746fe9cf6a52
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-client/files/etc/config/ucentral

@@ -6,9 +6,9 @@ config ucentral config
 	option reporting	10
 
 config timeouts timeouts
-	option offline		14400
+	option offline		120
 	option validate		120
-	option orphan		7200
+	option orphan		120
 
 #config event
 #	option type  dhcp

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=dd37ce95e77af90424d4792f1d292e90242d66ebf5c6552afdf364fd33c58af8
+PKG_MIRROR_HASH:=1ad9f7b5d5d1145e3aed14937eef60d6794d821e0244cc8fa824400d3da47f5a
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-08-12
-PKG_SOURCE_VERSION:=a1e7571a07ad309301954149884b13f71fbf74be
+PKG_SOURCE_DATE:=2025-07-11
+PKG_SOURCE_VERSION:=5276d0b8b6e83ab57354b0bcbb820de83a91ab88
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-state/files/ucentral-state

@@ -20,68 +20,9 @@ let config;
 let offline_timer;
 let current_state;
 let online = false;
-let leds_off = false;
 
 function self_healing() {
-	let heal_wifi = false;
-	let health_stat = json(fs.readfile('/tmp/ucentral.health'));
-	let last_nw_restart_ts = int(fs.readfile('/tmp/ucentral.nw_restart_ts')) || 0;
-	let time_passed_since_nw_restart = time() - last_nw_restart_ts;
 
-	if (health_stat) {
-		if (health_stat.data.rrm_chanutil == false) {
-			// RRM with Channel utilization abnormal, restart rrmd
-			ulog(LOG_INFO, 'RRM with Channel utilization abnormal, restarting rrmd\n');
-			system('/etc/init.d/rrmd restart');
-		}
-
-		if (health_stat.sanity != 100) {
-			for (let iface in health_stat.data.interfaces) {
-				let iface_data = health_stat.data.interfaces[iface];
-				if (iface_data.ssids) {
-					// one of the VAPs have an issue: flag up!
-					heal_wifi = true;
-					ulog(LOG_INFO, 'Time passed since last network restart = %d seconds\n', time_passed_since_nw_restart);
-					break;
-				}
-			}
-		} else {
-			// all VAPs are healthy, no need to heal anything
-			return;
-		}
-	}
-
-	if (fs.stat('/tmp/rrm_timestamp')) {
-		let rrm_chan_switch_flag = int(fs.readfile('/tmp/rrm_chan_switch')) || 0;
-		let last_rrm_timestamp = int(fs.readfile('/tmp/rrm_timestamp'));
-		let time_passed_since_rrm = time() - last_rrm_timestamp;
-
-		if (rrm_chan_switch_flag == 1) {
-			// RRM chan switch in progress, do not restart network!
-			ulog(LOG_INFO, 'RRM channel switch in progress, cannot restart network \n');
-			heal_wifi = false;
-		}
-
-		if (time_passed_since_rrm < 180) {
-			// RRM in progress, do not restart network!
-			ulog(LOG_INFO, 'RRM with Channel utilization may still be in progress, cannot restart network \n');
-			heal_wifi = false;
-		}
-	}
-
-	// keep a gap of at least 5 minutes between network restarts
-	if (heal_wifi && time_passed_since_nw_restart > 300) {
-		ulog(LOG_INFO, 'Restarting network \n');
-		// update network restart timestamp
-		let f = fs.open("/tmp/ucentral.nw_restart_ts", "w");
-		if (f) {
-			f.write(time());
-			f.close();
-		}
-
-		// restart network
-		system('/etc/init.d/network restart');
-	}
 }
 
 let healthcheck;
@@ -101,7 +42,7 @@ healthcheck = {
 	},
 
 	spawn: function() {
-		ulog(LOG_INFO, 'healthcheck execute\n');
+		ulog(LOG_INFO, 'healtcheck execute\n');
 		healthcheck.pid = uloop.process('/usr/share/ucentral/health.uc', [], {}, healthcheck.complete);
 	},
 };
@@ -149,13 +90,6 @@ function online_handler() {
 
 function config_load() {
 	ulog(LOG_INFO, 'loading config\n');
-
-	uci.load('system');
-	let led_off_cfg = uci.get("system", "@system[0]", "leds_off");
-	if (led_off_cfg == 1) {
-		leds_off = true;
-	}
-
 	uci.load('state');
 	config = uci.get_all('state');
 
@@ -199,7 +133,7 @@ function led_find(alias) {
 function factory_reset_timeout() {
 	let led = led_find('led-running');
 	if (led)
-		led_write(led, 'trigger', leds-off ? 'none' : 'default-on');
+		led_write(led, 'trigger', 'default-on');
 }
 
 let blink_timer;
@@ -218,7 +152,7 @@ let state_handler = {
 	offline: function() {
 		online = false;
 		let led = led_find('led-running');
-		if (!leds_off && led)
+		if (led)
 			led_write(led, 'trigger', 'heartbeat');
 		if (config.ui.offline_trigger) {
 			if (offline_timer)
@@ -231,7 +165,7 @@ let state_handler = {
 	online: function() {
 		online = true;
 		let led = led_find('led-running');
-		if (!leds_off && led)
+		if (led)
 			led_write(led, 'trigger', 'default-on');
 		online_handler();
 		return 0;
@@ -273,7 +207,7 @@ let ubus_methods = {
 			current_state = req.args.state;
 			blink_timeout();
 			ulog(LOG_INFO, 'set state -> ' + req.args.state + '\n');
-
+			
 			return state_handler[req.args.state](req.args);
 		},
 		args: {

feeds/ucentral/ucentral-tools/Makefile

@@ -3,6 +3,12 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=ucentral-tools
 PKG_RELEASE:=1
 
+PKG_SOURCE_URL=https://github.com/blogic/ucentral-tools.git
+PKG_MIRROR_HASH:=9ae6a0cd431595871c233550427c4043c2ba7ddb3c5d87e46ab74a03b2b5a947
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2021-01-28
+PKG_SOURCE_VERSION:=b013fc636e48d407870a46aaa68a09ed74de8d6f
+
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/src/CMakeLists.txt

@@ -1,36 +0,0 @@
-cmake_minimum_required(VERSION 2.6)
-
-PROJECT(openwifi-tools C)
-INCLUDE(GNUInstallDirs)
-ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
-
-SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
-
-ADD_EXECUTABLE(firstcontact firstcontact.c)
-TARGET_LINK_LIBRARIES(firstcontact curl crypto ssl ubox)
-INSTALL(TARGETS firstcontact
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(dhcpdiscover dhcpdiscover.c)
-INSTALL(TARGETS dhcpdiscover
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(dnsprobe dnsprobe.c)
-TARGET_LINK_LIBRARIES(dnsprobe ubox resolv)
-INSTALL(TARGETS dnsprobe
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(radiusprobe radiusprobe.c)
-TARGET_LINK_LIBRARIES(radiusprobe radcli)
-INSTALL(TARGETS radiusprobe
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(ip-collide ip-collide.c)
-TARGET_LINK_LIBRARIES(ip-collide ubox)
-INSTALL(TARGETS ip-collide
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)

feeds/ucentral/ucentral-tools/src/dnsprobe.c

@@ -1,690 +0,0 @@
-/*
- * nslookup_lede - musl compatible replacement for busybox nslookup
- *
- * Copyright (C) 2017 Jo-Philipp Wich <jo@mein.io>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-//config:config NSLOOKUP_OPENWRT
-//config:	bool "nslookup_openwrt"
-//config:	depends on !NSLOOKUP
-//config:	default y
-//config:	help
-//config:	  nslookup is a tool to query Internet name servers (LEDE flavor).
-//config:
-//config:config FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
-//config:       bool "Enable long options"
-//config:       default y
-//config:       depends on NSLOOKUP_OPENWRT && LONG_OPTS
-//config:       help
-//config:         Support long options for the nslookup applet.
-
-//applet:IF_NSLOOKUP_OPENWRT(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
-
-//kbuild:lib-$(CONFIG_NSLOOKUP_OPENWRT) += nslookup_lede.o
-
-//usage:#define nslookup_lede_trivial_usage
-//usage:       "[HOST] [SERVER]"
-//usage:#define nslookup_lede_full_usage "\n\n"
-//usage:       "Query the nameserver for the IP address of the given HOST\n"
-//usage:       "optionally using a specified DNS server"
-//usage:
-//usage:#define nslookup_lede_example_usage
-//usage:       "$ nslookup localhost\n"
-//usage:       "Server:     default\n"
-//usage:       "Address:    default\n"
-//usage:       "\n"
-//usage:       "Name:       debian\n"
-//usage:       "Address:    127.0.0.1\n"
-
-#include <stdio.h>
-#include <resolv.h>
-#include <string.h>
-#include <errno.h>
-#include <time.h>
-#include <poll.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <sys/socket.h>
-#include <arpa/inet.h>
-#include <net/if.h>
-#include <netdb.h>
-
-#include <libubox/ulog.h>
-
-#define ENABLE_FEATURE_IPV6	1
-
-typedef struct len_and_sockaddr {
-	socklen_t len;
-	union {
-		struct sockaddr sa;
-		struct sockaddr_in sin;
-#if ENABLE_FEATURE_IPV6
-		struct sockaddr_in6 sin6;
-#endif
-	} u;
-} len_and_sockaddr;
-
-struct ns {
-	const char *name;
-	len_and_sockaddr addr;
-	int failures;
-	int replies;
-};
-
-struct query {
-	const char *name;
-	size_t qlen, rlen;
-	unsigned char query[512], reply[512];
-	unsigned long latency;
-	int rcode, n_ns;
-};
-
-static const char *rcodes[] = {
-	"NOERROR",
-	"FORMERR",
-	"SERVFAIL",
-	"NXDOMAIN",
-	"NOTIMP",
-	"REFUSED",
-	"YXDOMAIN",
-	"YXRRSET",
-	"NXRRSET",
-	"NOTAUTH",
-	"NOTZONE",
-	"RESERVED11",
-	"RESERVED12",
-	"RESERVED13",
-	"RESERVED14",
-	"RESERVED15",
-	"BADVERS"
-};
-
-static unsigned int default_port = 53;
-static unsigned int default_retry = 1;
-static unsigned int default_timeout = 2;
-
-
-static int parse_reply(const unsigned char *msg, size_t len, int *bb_style_counter)
-{
-	ns_msg handle;
-	ns_rr rr;
-	int i, n, rdlen;
-	const char *format = NULL;
-	char astr[INET6_ADDRSTRLEN], dname[MAXDNAME];
-	const unsigned char *cp;
-
-	if (ns_initparse(msg, len, &handle) != 0) {
-		//fprintf(stderr, "Unable to parse reply: %s\n", strerror(errno));
-		return -1;
-	}
-
-	for (i = 0; i < ns_msg_count(handle, ns_s_an); i++) {
-		if (ns_parserr(&handle, ns_s_an, i, &rr) != 0) {
-			//fprintf(stderr, "Unable to parse resource record: %s\n", strerror(errno));
-			return -1;
-		}
-
-		rdlen = ns_rr_rdlen(rr);
-
-		switch (ns_rr_type(rr))
-		{
-		case ns_t_a:
-			if (rdlen != 4) {
-				//fprintf(stderr, "Unexpected A record length\n");
-				return -1;
-			}
-			inet_ntop(AF_INET, ns_rr_rdata(rr), astr, sizeof(astr));
-			printf("Name:\t%s\nAddress: %s\n", ns_rr_name(rr), astr);
-			break;
-
-#if ENABLE_FEATURE_IPV6
-		case ns_t_aaaa:
-			if (rdlen != 16) {
-				//fprintf(stderr, "Unexpected AAAA record length\n");
-				return -1;
-			}
-			inet_ntop(AF_INET6, ns_rr_rdata(rr), astr, sizeof(astr));
-			printf("%s\thas AAAA address %s\n", ns_rr_name(rr), astr);
-			break;
-#endif
-
-		case ns_t_ns:
-			if (!format)
-				format = "%s\tnameserver = %s\n";
-			/* fall through */
-
-		case ns_t_cname:
-			if (!format)
-				format = "%s\tcanonical name = %s\n";
-			/* fall through */
-
-		case ns_t_ptr:
-			if (!format)
-				format = "%s\tname = %s\n";
-			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-				ns_rr_rdata(rr), dname, sizeof(dname)) < 0) {
-				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
-				return -1;
-			}
-			printf(format, ns_rr_name(rr), dname);
-			break;
-
-		case ns_t_mx:
-			if (rdlen < 2) {
-				fprintf(stderr, "MX record too short\n");
-				return -1;
-			}
-			n = ns_get16(ns_rr_rdata(rr));
-			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-				ns_rr_rdata(rr) + 2, dname, sizeof(dname)) < 0) {
-				//fprintf(stderr, "Cannot uncompress MX domain: %s\n", strerror(errno));
-				return -1;
-			}
-			printf("%s\tmail exchanger = %d %s\n", ns_rr_name(rr), n, dname);
-			break;
-
-		case ns_t_txt:
-			if (rdlen < 1) {
-				//fprintf(stderr, "TXT record too short\n");
-				return -1;
-			}
-			n = *(unsigned char *)ns_rr_rdata(rr);
-			if (n > 0) {
-				memset(dname, 0, sizeof(dname));
-				memcpy(dname, ns_rr_rdata(rr) + 1, n);
-				printf("%s\ttext = \"%s\"\n", ns_rr_name(rr), dname);
-			}
-			break;
-
-		case ns_t_soa:
-			if (rdlen < 20) {
-				//fprintf(stderr, "SOA record too short\n");
-				return -1;
-			}
-
-			printf("%s\n", ns_rr_name(rr));
-
-			cp = ns_rr_rdata(rr);
-			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-			                       cp, dname, sizeof(dname));
-
-			if (n < 0) {
-				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
-				return -1;
-			}
-
-			printf("\torigin = %s\n", dname);
-			cp += n;
-
-			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-			                       cp, dname, sizeof(dname));
-
-			if (n < 0) {
-				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
-				return -1;
-			}
-
-			printf("\tmail addr = %s\n", dname);
-			cp += n;
-
-			printf("\tserial = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\trefresh = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\tretry = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\texpire = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\tminimum = %lu\n", ns_get32(cp));
-			break;
-
-		default:
-			break;
-		}
-	}
-
-	return i;
-}
-
-static int parse_nsaddr(const char *addrstr, len_and_sockaddr *lsa)
-{
-	char *eptr, *hash, ifname[IFNAMSIZ];
-	unsigned int port = default_port;
-	unsigned int scope = 0;
-
-	hash = strchr(addrstr, '#');
-
-	if (hash) {
-		*hash++ = '\0';
-		port = strtoul(hash, &eptr, 10);
-
-		if (eptr == hash || *eptr != '\0' || port > 65535) {
-			errno = EINVAL;
-			return -1;
-		}
-	}
-
-	hash = strchr(addrstr, '%');
-
-	if (hash) {
-		for (eptr = ++hash; *eptr != '\0' && *eptr != '#'; eptr++) {
-			if ((eptr - hash) >= IFNAMSIZ) {
-				errno = ENODEV;
-				return -1;
-			}
-
-			ifname[eptr - hash] = *eptr;
-		}
-
-		ifname[eptr - hash] = '\0';
-		scope = if_nametoindex(ifname);
-
-		if (scope == 0) {
-			errno = ENODEV;
-			return -1;
-		}
-	}
-
-#if ENABLE_FEATURE_IPV6
-	if (inet_pton(AF_INET6, addrstr, &lsa->u.sin6.sin6_addr)) {
-		lsa->u.sin6.sin6_family = AF_INET6;
-		lsa->u.sin6.sin6_port = htons(port);
-		lsa->u.sin6.sin6_scope_id = scope;
-		lsa->len = sizeof(lsa->u.sin6);
-		return 0;
-	}
-#endif
-
-	if (!scope && inet_pton(AF_INET, addrstr, &lsa->u.sin.sin_addr)) {
-		lsa->u.sin.sin_family = AF_INET;
-		lsa->u.sin.sin_port = htons(port);
-		lsa->len = sizeof(lsa->u.sin);
-		return 0;
-	}
-
-	errno = EINVAL;
-	return -1;
-}
-
-static unsigned long mtime(void)
-{
-	struct timespec ts;
-	clock_gettime(CLOCK_REALTIME, &ts);
-	return (unsigned long)ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
-}
-
-#if ENABLE_FEATURE_IPV6
-static void to_v4_mapped(len_and_sockaddr *a)
-{
-	if (a->u.sa.sa_family != AF_INET)
-		return;
-
-	memcpy(a->u.sin6.sin6_addr.s6_addr + 12,
-	       &a->u.sin.sin_addr, 4);
-
-	memcpy(a->u.sin6.sin6_addr.s6_addr,
-	       "\0\0\0\0\0\0\0\0\0\0\xff\xff", 12);
-
-	a->u.sin6.sin6_family = AF_INET6;
-	a->u.sin6.sin6_flowinfo = 0;
-	a->u.sin6.sin6_scope_id = 0;
-	a->len = sizeof(a->u.sin6);
-}
-#endif
-
-
-/*
- * Function logic borrowed & modified from musl libc, res_msend.c
- */
-
-static int send_queries(struct ns *ns, int n_ns, struct query *queries, int n_queries)
-{
-	int fd;
-	int timeout = default_timeout * 1000, retry_interval, servfail_retry = 0;
-	len_and_sockaddr from = { };
-#if ENABLE_FEATURE_IPV6
-	int one = 1;
-#endif
-	int recvlen = 0;
-	int n_replies = 0;
-	struct pollfd pfd;
-	unsigned long t0, t1, t2;
-	int nn, qn, next_query = 0;
-
-	from.u.sa.sa_family = AF_INET;
-	from.len = sizeof(from.u.sin);
-
-#if ENABLE_FEATURE_IPV6
-	for (nn = 0; nn < n_ns; nn++) {
-		if (ns[nn].addr.u.sa.sa_family == AF_INET6) {
-			from.u.sa.sa_family = AF_INET6;
-			from.len = sizeof(from.u.sin6);
-			break;
-		}
-	}
-#endif
-
-	/* Get local address and open/bind a socket */
-	fd = socket(from.u.sa.sa_family, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
-
-#if ENABLE_FEATURE_IPV6
-	/* Handle case where system lacks IPv6 support */
-	if (fd < 0 && from.u.sa.sa_family == AF_INET6 && errno == EAFNOSUPPORT) {
-		fd = socket(AF_INET, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
-		from.u.sa.sa_family = AF_INET;
-	}
-#endif
-
-	if (fd < 0)
-		return -1;
-
-	if (bind(fd, &from.u.sa, from.len) < 0) {
-		close(fd);
-		return -1;
-	}
-
-#if ENABLE_FEATURE_IPV6
-	/* Convert any IPv4 addresses in a mixed environment to v4-mapped */
-	if (from.u.sa.sa_family == AF_INET6) {
-		setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one));
-
-		for (nn = 0; nn < n_ns; nn++)
-			to_v4_mapped(&ns[nn].addr);
-	}
-#endif
-
-	pfd.fd = fd;
-	pfd.events = POLLIN;
-	retry_interval = timeout / default_retry;
-	t0 = t2 = mtime();
-	t1 = t2 - retry_interval;
-
-	for (; t2 - t0 < timeout; t2 = mtime()) {
-		if (t2 - t1 >= retry_interval) {
-			for (qn = 0; qn < n_queries; qn++) {
-				if (queries[qn].rlen)
-					continue;
-
-				for (nn = 0; nn < n_ns; nn++) {
-					sendto(fd, queries[qn].query, queries[qn].qlen,
-					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
-				}
-			}
-
-			t1 = t2;
-			servfail_retry = 2 * n_queries;
-		}
-
-		/* Wait for a response, or until time to retry */
-		if (poll(&pfd, 1, t1+retry_interval-t2) <= 0)
-			continue;
-
-		while (1) {
-			recvlen = recvfrom(fd, queries[next_query].reply,
-			                   sizeof(queries[next_query].reply), 0,
-			                   &from.u.sa, &from.len);
-
-			/* read error */
-			if (recvlen < 0)
-				break;
-
-			/* Ignore non-identifiable packets */
-			if (recvlen < 4)
-				continue;
-
-			/* Ignore replies from addresses we didn't send to */
-			for (nn = 0; nn < n_ns; nn++)
-				if (memcmp(&from.u.sa, &ns[nn].addr.u.sa, from.len) == 0)
-					break;
-
-			if (nn >= n_ns)
-				continue;
-
-			/* Find which query this answer goes with, if any */
-			for (qn = next_query; qn < n_queries; qn++)
-				if (!memcmp(queries[next_query].reply, queries[qn].query, 2))
-					break;
-
-			if (qn >= n_queries || queries[qn].rlen)
-				continue;
-
-			queries[qn].rcode = queries[next_query].reply[3] & 15;
-			queries[qn].latency = mtime() - t0;
-			queries[qn].n_ns = nn;
-
-			ns[nn].replies++;
-
-			/* Only accept positive or negative responses;
-			 * retry immediately on server failure, and ignore
-			 * all other codes such as refusal. */
-			switch (queries[qn].rcode) {
-			case 0:
-			case 3:
-				break;
-
-			case 2:
-				if (servfail_retry && servfail_retry--) {
-					ns[nn].failures++;
-					sendto(fd, queries[qn].query, queries[qn].qlen,
-					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
-				}
-				/* fall through */
-
-			default:
-				continue;
-			}
-
-			/* Store answer */
-			n_replies++;
-
-			queries[qn].rlen = recvlen;
-
-			if (qn == next_query) {
-				while (next_query < n_queries) {
-					if (!queries[next_query].rlen)
-						break;
-
-					next_query++;
-				}
-			}
-			else {
-				memcpy(queries[qn].reply, queries[next_query].reply, recvlen);
-			}
-
-			if (next_query >= n_queries)
-				return n_replies;
-		}
-	}
-
-	return n_replies;
-}
-
-static struct ns *add_ns(struct ns **ns, int *n_ns, const char *addr)
-{
-	char portstr[sizeof("65535")], *p;
-	len_and_sockaddr a = { };
-	struct ns *tmp;
-	struct addrinfo *ai, *aip, hints = {
-		.ai_flags = AI_NUMERICSERV,
-		.ai_socktype = SOCK_DGRAM
-	};
-
-	if (parse_nsaddr(addr, &a)) {
-		/* Maybe we got a domain name, attempt to resolve it using the standard
-		 * resolver routines */
-
-		p = strchr(addr, '#');
-		snprintf(portstr, sizeof(portstr), "%hu",
-		         (unsigned short)(p ? strtoul(p, NULL, 10) : default_port));
-
-		if (!getaddrinfo(addr, portstr, &hints, &ai)) {
-			for (aip = ai; aip; aip = aip->ai_next) {
-				if (aip->ai_addr->sa_family != AF_INET &&
-				    aip->ai_addr->sa_family != AF_INET6)
-					continue;
-
-#if ! ENABLE_FEATURE_IPV6
-				if (aip->ai_addr->sa_family != AF_INET)
-					continue;
-#endif
-
-				tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
-
-				if (!tmp)
-					return NULL;
-
-				*ns = tmp;
-
-				(*ns)[*n_ns].name = addr;
-				(*ns)[*n_ns].replies = 0;
-				(*ns)[*n_ns].failures = 0;
-				(*ns)[*n_ns].addr.len = aip->ai_addrlen;
-
-				memcpy(&(*ns)[*n_ns].addr.u.sa, aip->ai_addr, aip->ai_addrlen);
-
-				(*n_ns)++;
-			}
-
-			freeaddrinfo(ai);
-
-			return &(*ns)[*n_ns];
-		}
-
-		return NULL;
-	}
-
-	tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
-
-	if (!tmp)
-		return NULL;
-
-	*ns = tmp;
-
-	(*ns)[*n_ns].addr = a;
-	(*ns)[*n_ns].name = addr;
-	(*ns)[*n_ns].replies = 0;
-	(*ns)[*n_ns].failures = 0;
-
-	return &(*ns)[(*n_ns)++];
-}
-
-static struct query *add_query(struct query **queries, int *n_queries,
-                               int type, const char *dname)
-{
-	struct query *tmp;
-	ssize_t qlen;
-
-	tmp = realloc(*queries, sizeof(**queries) * (*n_queries + 1));
-
-	if (!tmp)
-		return NULL;
-
-	memset(&tmp[*n_queries], 0, sizeof(*tmp));
-
-	qlen = res_mkquery(QUERY, dname, C_IN, type, NULL, 0, NULL,
-	                   tmp[*n_queries].query, sizeof(tmp[*n_queries].query));
-
-	tmp[*n_queries].qlen = qlen;
-	tmp[*n_queries].name = dname;
-	*queries = tmp;
-
-	return &tmp[(*n_queries)++];
-}
-
-int main(int argc, char **argv)
-{
-	int rc = 1;
-	struct ns *ns = NULL;
-	struct query *queries = NULL;
-	int n_ns = 0, n_queries = 0;
-	int c = 0;
-
-	char *url = "telecominfraproject.com";
-	char *server = "127.0.0.1";
-	int v6 = 0;
-
-	while (1) {
-		int option = getopt(argc, argv, "u:s:i:6");
-
-		if (option == -1)
-			break;
-
-		switch (option) {
-		case '6':
-			v6 = 1;
-			break;
-		case 'u':
-			url = optarg;
-			break;
-		case 's':
-			server = optarg;
-			break;
-		default:
-		case 'h':
-			printf("Usage: dnsprobe OPTIONS\n"
-			       "  -6 - use ipv6\n"
-			       "  -u <url>\n"
-			       "  -s <server>\n");
-			return -1;
-		}
-	}
-
-	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "dnsprobe");
-
-	ULOG_INFO("attempting to probe dns - %s %s %s\n",
-		url, server, v6 ? "ipv6" : "");
-
-
-	add_query(&queries, &n_queries, v6 ? T_AAAA : T_A, url);
-
-	add_ns(&ns, &n_ns, server);
-
-	rc = send_queries(&ns[0], 1, queries, n_queries);
-	if (rc <= 0) {
-		fprintf(stderr, "Failed to send queries: %s\n", strerror(errno));
-		rc = -1;
-		goto out;
-	}
-
-	if (queries[0].rcode != 0) {
-		printf("** server can't find %s: %s\n", queries[0].name,
-		rcodes[queries[0].rcode]);
-		goto out;
-	}
-
-	if (queries[0].rlen) {
-		c = parse_reply(queries[0].reply, queries[0].rlen, NULL);
-	}
-
-	if (c == 0)
-		printf("*** Can't find %s: No answer\n", queries[0].name);
-	else if (c < 0)
-		printf("*** Can't find %s: Parse error\n", queries[0].name);
-	else
-		rc = 0;
-
-out:
-	if (n_ns)
-		free(ns);
-
-	if (n_queries)
-		free(queries);
-
-	return rc;
-}

feeds/ucentral/ucentral-tools/src/firstcontact.c

@@ -1,100 +0,0 @@
-#define _GNU_SOURCE
-#include <stdio.h>
-#include <getopt.h>
-
-#include <curl/curl.h>
-
-#include <libubox/ulog.h>
-
-static const char *file_cert = "/etc/open-wifi/client.pem";
-static const char *file_key  = "/etc/open-wifi/client_dec.key";
-static const char *file_json = "/etc/open-wifi/redirector.json";
-static const char *file_dbg  = "/tmp/firstcontact.hdr";
-
-int main(int argc, char **argv)
-{
-	FILE *fp_json;
-	FILE *fp_dbg;
-	CURLcode res;
-	CURL *curl;
-	char *devid = NULL;
-	char *url;
-
-	while (1) {
-		int option = getopt(argc, argv, "k:c:o:hi:");
-
-		if (option == -1)
-			break;
-
-		switch (option) {
-		case 'k':
-			file_key = optarg;
-			break;
-		case 'c':
-			file_cert = optarg;
-			break;
-		case 'o':
-			file_json = optarg;
-			break;
-		case 'i':
-			devid = optarg;
-			break;
-		default:
-		case 'h':
-			printf("Usage: firstcontact OPTIONS\n"
-			       "  -k <keyfile>\n"
-			       "  -c <certfile>\n"
-			       "  -o <outfile>\n"
-			       "  -i <devid>\n");
-			return -1;
-		}
-	}
-
-	if (!devid) {
-		fprintf(stderr, "missing devid\n");
-		return -1;
-	}
-
-	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "firstcontact");
-	ULOG_INFO("attempting first contact\n");
-
-	fp_dbg = fopen(file_dbg, "wb");
-	fp_json = fopen(file_json, "wb");
-	if (!fp_json) {
-		ULOG_ERR("failed to create %s\n", file_json);
-		return -1;
-	}
-
-	curl_global_init(CURL_GLOBAL_DEFAULT);
-	curl = curl_easy_init();
-	if (!curl) {
-		ULOG_ERR("curl_easy_init failed\n");
-		return -1;
-	}
-
-	if (asprintf(&url, "https://clientauth.demo.one.digicert.com/iot/api/v2/device/%s", devid) < 0) {
-		ULOG_ERR("failed to assemble url\n");
-		return -1;
-	}
-
-	curl_easy_setopt(curl, CURLOPT_URL, url);
-	curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp_json);
-	curl_easy_setopt(curl, CURLOPT_HEADERDATA, fp_dbg);
-	curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
-	curl_easy_setopt(curl, CURLOPT_SSLCERT, file_cert);
-	curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
-	curl_easy_setopt(curl, CURLOPT_SSLKEY, file_key);
-	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
-
-	res = curl_easy_perform(curl);
-	if (res != CURLE_OK)
-		ULOG_ERR("curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
-	else
-		ULOG_INFO("downloaded first contact data\n");
-	curl_easy_cleanup(curl);
-	curl_global_cleanup();
-
-	ulog_close();
-
-	return (res != CURLE_OK);
-}

feeds/ucentral/ucentral-tools/src/ip-collide.c

@@ -1,86 +0,0 @@
-#include <arpa/inet.h>
-#include <net/if.h>
-
-#include <libubox/list.h>
-#include <libubox/ulog.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-struct route {
-	struct list_head list;
-	char devname[64];
-	uint32_t domain;
-	uint32_t mask;
-};
-
-static struct list_head routes = LIST_HEAD_INIT(routes);
-
-static int parse_routes(void)
-{
-	FILE *fp = fopen("/proc/net/route", "r");
-	int flgs, ref, use, metric, mtu, win, ir;
-	struct route *route;
-	unsigned long g;
-	int r;
-
-	r = fscanf(fp, "%*[^\n]\n");
-	if (r < 0) {
-		fprintf(stderr, "failed to parse routes\n");
-		return -1;
-	}
-	while (1) {
-		route = malloc(sizeof(*route));
-		if (!route)
-			break;
-		memset(route, 0, sizeof(*route));
-		r = fscanf(fp, "%63s%x%lx%X%d%d%d%x%d%d%d\n",
-			route->devname, &route->domain, &g, &flgs, &ref, &use, &metric, &route->mask,
-			&mtu, &win, &ir);
-		if (r != 11 && (r < 0) && feof(fp))
-			break;
-		list_add(&route->list, &routes);
-		printf("1 %s %x %x\n", route->devname, ntohl(route->domain), ntohl(route->mask));
-	}
-
-	fclose(fp);
-
-	return 0;
-}
-
-static int find_collisions(void)
-{
-	struct route *route;
-
-	list_for_each_entry(route, &routes, list) {
-		struct route *compare;
-
-		if (!route->domain || !route->mask)
-			continue;
-		list_for_each_entry(compare, &routes, list) {
-			if (!compare->domain || !compare->mask)
-				continue;
-			if (compare == route)
-				continue;
-			if (((route->domain & route->mask) == (compare->domain & route->mask)) ||
-			    ((route->domain & compare->mask) == (compare->domain & compare->mask))) {
-				ULOG_ERR("collision detected\n");
-				return 1;
-			}
-		}
-	}
-	ULOG_INFO("no collision detected\n");
-	return 0;
-}
-
-int main(int argc, char **argv)
-{
-	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "ip-collide");
-
-	parse_routes();
-	if (!list_empty(&routes))
-		return find_collisions();
-
-	return 0;
-}

feeds/ucentral/ucentral-tools/src/radiusprobe.c

@@ -1,47 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <radcli/radcli.h>
-
-int
-main(int argc, char **argv)
-{
-	int result;
-	char username[128];
-	char passwd[AUTH_PASS_LEN + 1];
-	VALUE_PAIR *send, *received;
-	uint32_t service;
-	rc_handle *rh;
-
-	/* Not needed if you already used openlog() */
-	rc_openlog("radiusprobe");
-
-	if ((rh = rc_read_config("/tmp/radius.conf")) == NULL)
-		return ERROR_RC;
-
-	strcpy(username, "healthcheck");
-	strcpy(passwd, "uCentral");
-
-	send = NULL;
-
-	if (rc_avpair_add(rh, &send, PW_USER_NAME, username, -1, 0) == NULL)
-		return ERROR_RC;
-
-	if (rc_avpair_add(rh, &send, PW_USER_PASSWORD, passwd, -1, 0) == NULL)
-		return ERROR_RC;
-
-	service = PW_AUTHENTICATE_ONLY;
-	if (rc_avpair_add(rh, &send, PW_SERVICE_TYPE, &service, -1, 0) == NULL)
-		return ERROR_RC;
-
-	result = rc_auth(rh, 0, send, &received, NULL);
-
-	if (result == OK_RC || result == REJECT_RC) {
-		fprintf(stderr, "RADIUS server OK\n");
-		result = 0;
-	} else {
-		fprintf(stderr, "RADIUS server failure\n");
-		result = -1;
-	}
-
-	return result;
-}

feeds/ucentral/udevmand/Makefile

@@ -2,9 +2,17 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=udevmand
 PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=https://github.com/blogic/udevmand.git
+PKG_MIRROR_HASH:=6f6a5536656a64e1f38f03747ef06ab03b28ef797adc72a901eb7dbc6e45e496
+PKG_SOURCE_DATE:=20250704
+PKG_SOURCE_VERSION:=e56be31d7c341467cc26714dac5c6b450a612808
 CMAKE_INSTALL:=1
+
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=
+
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 
 include $(INCLUDE_DIR)/package.mk