cloud_discovery: add blacklist for discovery methods

Introduce a blacklist mechanism to avoid retrying failed discovery
methods within the same discovery cycle. Each time a method fails
validation, it is added to the blacklist. The blacklist is cleared
once the device transitions to ONLINE or after all discovery methods
have been attempted.

This prevents repeated attempts of failing methods and ensures the
discovery process progresses more reliably.

Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -24,8 +24,6 @@ endef
 #
 
 ALLWIFIBOARDS:= \
-	cig-wf186w \
-	cig-wf186h \
 	cig-wf660a \
 	cig-wf194c \
 	cig-wf194c4 \
@@ -49,6 +47,8 @@ ALLWIFIBOARDS:= \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
 	indio-um-510axm-v1 \
+	indio-um-325ax-v2 \
+	indio-um-525axp \
 	muxi-ap3220l \
 	plasmacloud-pax1800 \
 	wallys-dr5018 \
@@ -108,6 +108,16 @@ $(call Package/ath11k-wifi-default)
     TITLE:=cig-wf196 bdf
 endef
 
+define Package/ath11k-wifi-cig-wf186w
+$(call Package/ath11k-wifi-default)
+    TITLE:=cig-wf186w bdf
+endef
+
+define Package/ath11k-wifi-cig-wf186h
+$(call Package/ath11k-wifi-default)
+    TITLE:=cig-wf186h bdf
+endef
+
 define Package/ath11k-wifi-gl-ax1800
 $(call Package/ath11k-wifi-default)
     TITLE:=gl-ax1800 bdf
@@ -284,6 +294,24 @@ define Package/ath11k-wifi-cig-wf196/install
 	$(INSTALL_DATA) ./board-cig-wf196-us.bin.IPQ8074 $(1)/lib/firmware/ath11k/IPQ8074/hw2.0/board.bin.US
 endef
 
+define Package/ath11k-wifi-cig-wf186w/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
+	$(INSTALL_DATA) ./board-cig-wf186w-us.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US
+	$(INSTALL_DATA) ./board-cig-wf186w-ca.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA
+	$(INSTALL_DATA) ./board-cig-wf186w-us.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US
+	$(INSTALL_DATA) ./board-cig-wf186w-ca.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA
+endef
+
+define Package/ath11k-wifi-cig-wf186h/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/qcn6122/hw1.0/
+	$(INSTALL_DATA) ./board-cig-wf186h-us.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US
+	$(INSTALL_DATA) ./board-cig-wf186h-ca.bin.IPQ5018 $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA
+	$(INSTALL_DATA) ./board-cig-wf186h-us.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US
+	$(INSTALL_DATA) ./board-cig-wf186h-ca.bin.QCN6122 $(1)/lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA
+endef
+
 define Package/ath11k-wifi-optimcloud-d50/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ5018/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/QCN9074/hw1.0/
@@ -393,8 +421,6 @@ define Package/ath11k-wifi-cig-wf188n/install
 	$(INSTALL_DATA) ./board-cig-wf188n-us.bin.IPQ6018 $(1)/lib/firmware/ath11k/IPQ6018/hw1.0/board.bin.US
 endef
 
-$(eval $(call generate-ath11k-wifi-package,cig-wf186w,Cigtech WF186w))
-$(eval $(call generate-ath11k-wifi-package,cig-wf186h,Cigtech WF186h))
 $(eval $(call generate-ath11k-wifi-package,cig-wf660a,Cigtech WF660a))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
 $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
@@ -417,6 +443,8 @@ $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1))
+$(eval $(call generate-ath11k-wifi-package,indio-um-325ax-v2,Indio UM-325AX V2))
+$(eval $(call generate-ath11k-wifi-package,indio-um-525axp,Indio UM-525AXP))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
@@ -440,6 +468,8 @@ $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq8074))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-ipq6018))
 $(eval $(call BuildPackage,ath11k-wifi-qcom-qcn9000))
 $(eval $(call BuildPackage,ath11k-wifi-cig-wf196))
+$(eval $(call BuildPackage,ath11k-wifi-cig-wf186w))
+$(eval $(call BuildPackage,ath11k-wifi-cig-wf186h))
 $(eval $(call BuildPackage,ath11k-wifi-motorola-q14))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d50))
 $(eval $(call BuildPackage,ath11k-wifi-optimcloud-d60))

feeds/ipq807x_v5.4/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude ?? 0;
-let longitude = gps_info.longitude ?? 0;
+let latitude = gps_info.latitude || 0;
+let longitude = gps_info.longitude || 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation ?? 0;
+afc_location.height = gps_info.elevation || 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = gps_info.major_axis ?? 0;
-afc_location.minor_axis = gps_info.minor_axis ?? 0;
-afc_location.orientation = gps_info.major_orientation ?? 0;
-afc_location.vertical_tolerance = gps_info.vdop ?? 0;
+afc_location.major_axis = int(gps_info.major_axis) || 1;
+afc_location.minor_axis = int(gps_info.minor_axis) || 1;
+afc_location.orientation = gps_info.major_orientation || 0;
+afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/ipq807x_v5.4/hostapd/files/hostapd.uc

@@ -1,7 +1,8 @@
 let libubus = require("ubus");
-import { open, readfile } from "fs";
+import { open, readfile, writefile } from "fs";
 import { wdev_create, wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open } from "common";
 
+let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -893,10 +894,24 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let ret = ubus.call("afc", "request", { data });
-		if (type(ret) != "object")
-			return;
-		return ret.data;
+		let wireless_config = uci.get_all('wireless');
+		for (let l, afc_server in wireless_config) {
+			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
+				hostapd.printf(`Sending AFC request: ${data}`);
+				writefile("/tmp/afc-request.json", data);
+
+				if (afc_server.access_token)
+					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
+				else if (afc_server.cert)
+					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
+
+				let afc_response = (readfile("/tmp/afc-response.json"));
+				if (afc_response)
+					return afc_response;
+				else
+					return;
+			}
+		}
 	},
 	bss_add: function(name, obj) {
 		bss_event("add", name);

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -16,6 +16,13 @@ edgecore,eap104)
 	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
         ucidef_set_led_default "power" "POWER" "green:power" "on"
 	;;
+indio,um-325ax-v2|\
+indio,um-525axp)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
+        ucidef_set_led_default "power" "POWER" "green:power" "on"
+	;;
 cig,wf186h|\
 cig,wf186w)
         ucidef_set_led_default "power" "POWER" "green:status" "on"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -48,6 +48,13 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
+	indio,um-325ax-v2|\
+	indio,um-525axp)
+		ucidef_set_interface_wan "eth1"
+		ucidef_set_interface_lan "eth0"
+		ucidef_add_switch "switch1" \
+			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
 	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -142,6 +142,8 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
+	indio,um-325ax-v2|\
+	indio,um-525axp|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -183,6 +185,8 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	;;
 ath11k/qcn6122/hw1.0/caldata_2.bin)
 	case "$board" in
+	indio,um-325ax-v2|\
+	indio,um-525axp|\
 	wallys,dr5018|\
 	edgecore,eap104|\
 	edgecore,oap101-6e|\
@@ -234,6 +238,8 @@ ath11k-macs)
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e-6e|\
+	indio,um-325ax-v2|\
+	indio,um-525axp|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -251,6 +257,32 @@ ath11k-macs)
 		;;
 	esac
 	;;
+ath11k/IPQ5018/hw1.0/board.bin)
+	case "$board" in
+	cig,wf186w|\
+	cig,wf186h)
+                country=`cat /etc/ucentral/country`
+                if [ "$country" == "CA" ]; then
+                        ln -s /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.CA /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
+                else
+                        ln -s /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin.US /lib/firmware/ath11k/IPQ5018/hw1.0/board.bin
+                fi
+                ;;
+	esac
+	;;
+ath11k/qcn6122/hw1.0/board.bin)
+	case "$board" in
+	cig,wf186w|\
+	cig,wf186h)
+                country=`cat /etc/ucentral/country`
+                if [ "$country" == "CA" ]; then
+                        ln -s /lib/firmware/ath11k/qcn6122/hw1.0/board.bin.CA /lib/firmware/ath11k/qcn6122/hw1.0/board.bin
+                else
+                        ln -s /lib/firmware/ath11k/qcn6122/hw1.0/board.bin.US /lib/firmware/ath11k/qcn6122/hw1.0/board.bin
+                fi
+                ;;
+	esac
+	;;
 *)
 	exit 1
 	;;

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -81,6 +81,8 @@ platform_check_image() {
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
+	indio,um-325ax-v2|\
+	indio,um-525axp|\
 	optimcloud,d60|\
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
@@ -107,29 +109,44 @@ platform_do_upgrade() {
 
 	board=$(board_name)
 	case $board in
-	glinet,b3000|\
+	indio,um-325ax-v2|\
+	indio,um-525axp|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
 	edgecore,eap104)
+		if [ "$(find_mtd_chardev rootfs)" ]; then
+			CI_UBIPART="rootfs"
+		else
+			if grep -q rootfs1 /proc/cmdline; then
+				CI_UBIPART="rootfs2"
+				CI_FWSETENV="active 2"
+			else
+				CI_UBIPART="rootfs1"
+				CI_FWSETENV="active 1"
+			fi
+		fi
+		nand_upgrade_tar "$1"
+		;;
+	glinet,b3000)
 		CI_UBIPART="rootfs1"
 		[ "$(find_mtd_chardev rootfs)" ] && CI_UBIPART="rootfs"
 		nand_upgrade_tar "$1"
 		;;
-        hfcl,ion4x_w|\
+	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
-                wp_part=$(fw_printenv primary | cut  -d = -f2)
-                echo "Current Primary is $wp_part"
-                if [[ $wp_part == 1 ]]; then
-                        CI_UBIPART="rootfs"
-                        CI_FWSETENV="primary 0"
-                else
-                        CI_UBIPART="rootfs_1"
-                        CI_FWSETENV="primary 1"
-                fi
-                nand_upgrade_tar "$1"
-                ;;
+		wp_part=$(fw_printenv primary | cut  -d = -f2)
+		echo "Current Primary is $wp_part"
+		if [[ $wp_part == 1 ]]; then
+				CI_UBIPART="rootfs"
+				CI_FWSETENV="primary 0"
+		else
+				CI_UBIPART="rootfs_1"
+				CI_FWSETENV="primary 1"
+		fi
+		nand_upgrade_tar "$1"
+		;;
 	cig,wf186w|\
 	cig,wf186h|\
 	emplus,wap385c|\

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-325ax-v2.dts

@@ -0,0 +1,941 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Indio UM-325AX V2";
+	compatible = "indio,um-325ax-v2", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+                //led-failsafe = &led_red;
+                //led-running = &led_green;
+                //led-upgrade = &led_green;
+                //led-gateway = &led_blue;
+                //led-factory = &led_blue;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E400000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F400000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4500000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+		
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          14MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D600000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4ED00000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x5400000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D400000 {
+			no-map;
+			reg = <0x0 0x4D400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+			no-map;
+			reg = <0x0 0x4D600000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+			no-map;
+			reg = <0x0 0x4E600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+			no-map;
+			reg = <0x0 0x4E700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
+			no-map;
+			reg = <0x0 0x4E800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+			no-map;
+			reg = <0x0 0x4FD00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+			no-map;
+			reg = <0x0 0x4FE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+			no-map;
+			reg = <0x0 0x4FF00000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+		gpio-watchdog {
+			compatible = "linux,wdt-gpio";
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			hw_algo = "toggle";
+			hw_margin_ms = <5000>;
+			always-running;
+		};
+
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+				ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x28>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x1e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <28>;
+					};
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio22", "gpio24", "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_0 {
+			pins = "gpio7";
+			function = "qspi0";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_1 {
+			pins = "gpio6";
+			function = "qspi1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_2 {
+			pins = "gpio5";
+			function = "qspi2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_3 {
+			pins = "gpio4";
+			function = "qspi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+audio_pins: audio_pinmux {
+};
+        leds_pins: leds_pins {
+                led_5g {
+                        pins = "gpio34";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+                led_2g {
+                        pins = "gpio33";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+                led_sys {
+                        pins = "gpio26";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+		led_onekey {
+                        pins = "gpio28";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+        };
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+        leds {
+                compatible = "gpio-leds";
+                pinctrl-0 = <&leds_pins>;
+                pinctrl-names = "default";
+
+                led_blue: led@34 {
+                        label = "led_5g";
+                        gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_5g";
+                        default-state = "off";
+                };
+                led_green: led@33 {
+                        label = "led_2g";
+                        gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_2g";
+                        default-state = "off";
+                };
+                led_red: led@26 {
+                        label = "led_sys";
+                        gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_sys";
+                        default-state = "off";
+                };
+		led@28 {
+                        label = "led_onekey";
+                        gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_onekey";
+                        default-state = "off";
+                };
+        };
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+					<&wcss_smp2p_out 17>,
+					<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+					<&wcss_smp2p_in 25 0>,
+					<&wcss_smp2p_in 28 0>,
+					<&wcss_smp2p_in 27 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+					<&wcss_smp2p_out 25>,
+					<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef	__IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+	#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+	#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x50>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "disabled";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,rproc = <&q6_wcss_pd3>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0xb0>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data2>;
+#else
+	memory-region = <&q6_qcn6122_data2>;
+#endif
+	status = "ok";
+};
+
+
+&usb3 {
+	status = "ok";
+	device-power-gpio = <&tlmm 24 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	#status = "disabled";
+	#perst-gpio = <&tlmm 18 1>;
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	#status = "disabled";
+	#perst-gpio = <&tlmm 15 1>;
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x1_rp {
+        status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
+

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-indio-um-525axp.dts

@@ -0,0 +1,941 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Indio UM-525AXP";
+	compatible = "indio,um-525axp", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+                //led-failsafe = &led_red;
+                //led-running = &led_green;
+                //led-upgrade = &led_green;
+                //led-gateway = &led_blue;
+                //led-factory = &led_blue;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E400000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F400000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4500000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+		
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          14MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D600000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4ED00000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x5400000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D400000 {
+			no-map;
+			reg = <0x0 0x4D400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+			no-map;
+			reg = <0x0 0x4D600000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+			no-map;
+			reg = <0x0 0x4E600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+			no-map;
+			reg = <0x0 0x4E700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
+			no-map;
+			reg = <0x0 0x4E800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+			no-map;
+			reg = <0x0 0x4FD00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+			no-map;
+			reg = <0x0 0x4FE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+			no-map;
+			reg = <0x0 0x4FF00000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+		gpio-watchdog {
+			compatible = "linux,wdt-gpio";
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			hw_algo = "toggle";
+			hw_margin_ms = <5000>;
+			always-running;
+		};
+
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+				ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x28>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x1e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <28>;
+					};
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio22", "gpio24", "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_0 {
+			pins = "gpio7";
+			function = "qspi0";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_1 {
+			pins = "gpio6";
+			function = "qspi1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_2 {
+			pins = "gpio5";
+			function = "qspi2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_3 {
+			pins = "gpio4";
+			function = "qspi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+audio_pins: audio_pinmux {
+};
+        leds_pins: leds_pins {
+                led_5g {
+                        pins = "gpio34";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+                led_2g {
+                        pins = "gpio33";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+                led_sys {
+                        pins = "gpio26";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+		led_onekey {
+                        pins = "gpio28";
+                        function = "gpio";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+        };
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+        leds {
+                compatible = "gpio-leds";
+                pinctrl-0 = <&leds_pins>;
+                pinctrl-names = "default";
+
+                led_blue: led@34 {
+                        label = "led_5g";
+                        gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_5g";
+                        default-state = "off";
+                };
+                led_green: led@33 {
+                        label = "led_2g";
+                        gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_2g";
+                        default-state = "off";
+                };
+                led_red: led@26 {
+                        label = "led_sys";
+                        gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_sys";
+                        default-state = "off";
+                };
+		led@28 {
+                        label = "led_onekey";
+                        gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_onekey";
+                        default-state = "off";
+                };
+        };
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+					<&wcss_smp2p_out 17>,
+					<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+					<&wcss_smp2p_in 25 0>,
+					<&wcss_smp2p_in 28 0>,
+					<&wcss_smp2p_in 27 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+					<&wcss_smp2p_out 25>,
+					<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef	__IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+	#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+	#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x50>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "disabled";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,rproc = <&q6_wcss_pd3>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0xb0>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data2>;
+#else
+	memory-region = <&q6_qcn6122_data2>;
+#endif
+	status = "ok";
+};
+
+
+&usb3 {
+	status = "ok";
+	device-power-gpio = <&tlmm 24 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	#status = "disabled";
+	#perst-gpio = <&tlmm 18 1>;
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	#status = "disabled";
+	#perst-gpio = <&tlmm 15 1>;
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x1_rp {
+        status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
+

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630c-311g.dts

@@ -151,6 +151,14 @@
 			no-map;
 			reg = <0x0 0x4F000000 0x0 0x100000>;
 		};
+
+		ramoops: ramoops@4f100000 {
+			compatible = "ramoops";
+			reg = <0x0 0x4f100000 0x0 0x80000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
 	#else
 	/*                 512MB/1GB Profiles
 	 * +==========+==============+=========================+
@@ -285,6 +293,13 @@
 			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
+		ramoops: ramoops@4fd00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x4fd00000 0x0 0x80000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
 	#endif
 	};
 

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-311g.dts

@@ -151,6 +151,14 @@
 			no-map;
 			reg = <0x0 0x4F000000 0x0 0x100000>;
 		};
+
+		ramoops: ramoops@4f100000 {
+			compatible = "ramoops";
+			reg = <0x0 0x4f100000 0x0 0x80000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
 	#else
 	/*                 512MB/1GB Profiles
 	 * +==========+==============+=========================+
@@ -285,6 +293,13 @@
 			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
+		ramoops: ramoops@4fd00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x4fd00000 0x0 0x80000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
 	#endif
 	};
 

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-312g.dts

@@ -154,6 +154,14 @@
 			no-map;
 			reg = <0x0 0x4F000000 0x0 0x100000>;
 		};
+
+		ramoops: ramoops@4f100000 {
+			compatible = "ramoops";
+			reg = <0x0 0x4f100000 0x0 0x80000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
 	#else
 	/*		 512MB/1GB Profiles
 	 * +==========+==============+=========================+
@@ -288,6 +296,13 @@
 			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
+		ramoops: ramoops@4fd00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x4fd00000 0x0 0x80000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
 	#endif
 	};
 

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -93,6 +93,24 @@ define Device/edgecore_eap104
 endef
 TARGET_DEVICES += edgecore_eap104
 
+define Device/indio_um-325ax-v2
+  DEVICE_TITLE := Indio UM-325ax-V2
+  DEVICE_DTS := qcom-ipq5018-indio-um-325ax-v2
+  SUPPORTED_DEVICES := indio,um-325ax-v2
+  DEVICE_PACKAGES := ath11k-wifi-indio-um-325ax-v2 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+endef
+TARGET_DEVICES += indio_um-325ax-v2
+
+define Device/indio_um-525axp
+  DEVICE_TITLE := Indio UM-525axp
+  DEVICE_DTS := qcom-ipq5018-indio-um-525axp
+  SUPPORTED_DEVICES := indio,um-525axp
+  DEVICE_PACKAGES := ath11k-wifi-indio-um-525axp ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+endef
+TARGET_DEVICES += indio_um-525axp
+
 define Device/udaya_a6_id2
   DEVICE_TITLE := Udaya A6 - ID2
   DEVICE_DTS := qcom-ipq5018-udaya-a6-id2

feeds/ipq807x_v5.4/qca-ssdk/patches/500-define-mib-loop-cnt-to-gobal.patch

@@ -0,0 +1,61 @@
+--- a/include/init/ssdk_plat.h
++++ b/include/init/ssdk_plat.h
+@@ -330,6 +330,7 @@ struct qca_phy_priv {
+ 	struct mii_bus *miibus;
+ /*qca808x_end*/
+ 	u64 *mib_counters;
++	a_uint32_t mib_loop_cnt;
+ 	/* dump buf */
+ 	a_uint8_t  buf[2048];
+ 	a_uint32_t link_polling_required;
+--- a/src/ref/ref_mib.c
++++ b/src/ref/ref_mib.c
+@@ -479,39 +479,37 @@ qca_ar8327_sw_get_port_mib(struct switch
+ #endif
+
+ int
+-_qca_ar8327_sw_capture_port_tx_counter(struct qca_phy_priv *priv, int port)
++_qca_ar8327_sw_capture_port_tx_counter(a_uint32_t dev_id, int port)
+ {
+     fal_mib_info_t  mib_Info;
+
+     memset(&mib_Info, 0, sizeof(fal_mib_info_t));
+-    fal_get_tx_mib_info(priv->device_id, port, &mib_Info);
++    fal_get_tx_mib_info(dev_id, port, &mib_Info);
+
+     return 0;
+ }
+
+ int
+-_qca_ar8327_sw_capture_port_rx_counter(struct qca_phy_priv *priv, int port)
++_qca_ar8327_sw_capture_port_rx_counter(a_uint32_t dev_id, int port)
+ {
+     fal_mib_info_t  mib_Info;
+
+     memset(&mib_Info, 0, sizeof(fal_mib_info_t));
+-    fal_get_rx_mib_info(priv->device_id, port, &mib_Info);
++    fal_get_rx_mib_info(dev_id, port, &mib_Info);
+     return 0;
+ }
+
+ void
+ qca_ar8327_sw_mib_task(struct qca_phy_priv *priv)
+ {
+-	static int loop = 0;
+-
+ 	mutex_lock(&priv->reg_mutex);
+-	if ((loop % 2) == 0)
+-		_qca_ar8327_sw_capture_port_rx_counter(priv, loop/2);
++	if ((priv->mib_loop_cnt % 2) == 0)
++		_qca_ar8327_sw_capture_port_rx_counter(priv->device_id, priv->mib_loop_cnt/2);
+ 	else
+-		_qca_ar8327_sw_capture_port_tx_counter(priv, loop/2);
++		_qca_ar8327_sw_capture_port_tx_counter(priv->device_id, priv->mib_loop_cnt/2);
+
+-	if(++loop == (2 * (priv->ports))) {
+-		loop = 0;
++	if(++priv->mib_loop_cnt == (2 * (priv->ports))) {
++		priv->mib_loop_cnt = 0;
+ 	}
+
+ 	mutex_unlock(&priv->reg_mutex);

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap111.dts

@@ -200,7 +200,7 @@
 			phy-mode = "sgmii";
 			full-duplex;
 			pause;
-			airoha,surge = <1>;
+			airoha,surge = <0>;
 			airoha,polarity = <2>;
 		};
 

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/hotplug.d/iface/99-mtk-sr-scene-cond

@@ -34,13 +34,11 @@ case "$board" in
 
         if [ -f "$phy0_file" ]; then
             check_phy0=$(cat $phy0_file)
-            echo "check_phy0 = $check_phy0"
             [ "$check_phy0" == 0 ] && echo 1 > $phy0_file
         fi
 
         if [ -f "$phy1_file" ]; then
             check_phy1=$(cat $phy1_file)
-            echo "check_phy1 = $check_phy1"
             [ "$check_phy1" == 0 ] && echo 1 > $phy1_file
         fi
 

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-setting.patch

@@ -1,107 +0,0 @@
-# Description: The Mesh11sd daemon expects the mesh interface name to follow the format 'mesh<index>'. 
-# If it doesn't find this format, it attempts to set it in the UCI wireless configuration. 
-# However, when operating in other modes such as AP, STA, or Ad-Hoc, the script was patched to remove 
-# the mesh interface name from UCI. This process can lead to a race condition between the UI and Mesh11sd,
-# resulting in stale interface name values.
-# This patch resolves the issue by removing the setting of the interface name from the script, as it is 
-# now managed through the UI, ensuring consistency and eliminating the race condition.
-
---- a/src/mesh11sd
-+++ b/src/mesh11sd
-@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
- 
- 		if [ $mode -eq 5 ]; then
- 			# startup=4, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 4 ]; then
- 			# startup=4, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 3 ]; then
- 			# startup=0, statusmode=2, enabled=1
-+			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
- 
- 		elif [ $mode -eq 2 ]; then
- 			# startup=0, statusmode=2, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 
- 		elif [ $mode -eq 1 ]; then
- 			# startup=0, statusmode=0, enabled=1
-+			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 			startup=0
- 			statusmode=0
- 			mode=1
--			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
- 
- 		elif [ $mode -eq 0 ]; then
- 			# startup=0, statusmode=0, enabled=0
-+			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 			startup=0
- 			statusmode=2
- 			mode=0
--			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
- 		fi
- 
- 		if [ $mode -ne $lastmode ]; then
-@@ -441,26 +441,6 @@ elif [ "$1" = "daemon" ]; then
- 			meshconfigs=$(uci show wireless 2> /dev/null | grep "mode='mesh'" | awk -F ".mode='mesh'" '{printf "%s " $1}')
- 
- 			if [ ! -z "$meshconfigs" ]; then
--				for meshconfig in $meshconfigs; do
--					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
--
--					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
--						# No interface name in config, so add one
--						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
--						echo "$ucibatch" | uci batch
--						changed=1
--						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
--						write_to_syslog
--					fi
--					meshindex=$(($meshindex+1))
--				done
--
--				if [ "$changed" -eq 1 ]; then
--					changed=0
--					restart_mesh
--					continue
--				fi
--
- 				# get a list of interfaces
- 				get_mesh_iflist
- 
-@@ -482,13 +462,13 @@ elif [ "$1" = "daemon" ]; then
- 						# this is not a mesh interface
- 						continue
- 					else
--						# Check if this interface has a uci ifname
--						uciname=$(uci show wireless | grep "ifname='$iface'" | awk -F "." '{printf "wireless.%s" $2}')
-+						# Check if this interface mode is 'mesh'
-+						uciname=$(uci show wireless | grep "mode='mesh'" | awk -F "." '{printf "wireless.%s" $2}')
- 
- 						if [ -z "$uciname" ]; then
--							# Error - No interface name in config, we should have added one
-+							# Error - No interface with mode as mesh
- 							debugtype="err"
--							syslogmessage="Error getting mesh interface name"
-+							syslogmessage="Error getting mesh interface section"
- 							write_to_syslog
- 							continue
- 						fi

feeds/morse/utils/morse_mesh11sd/patches/002-remove-mesh-ifname-upon-disable.patch

@@ -0,0 +1,63 @@
+# Description: The Mesh11sd daemon sets the interface name 'mesh<index>' to the mesh interface.
+# However, even after disabling the mesh mode, this interface name persists, leading to confusion
+# when operating in other modes like AP/STA/Ad-Hoc, where the interface name continues to display as 'mesh<idx>'.
+# This patch addresses the issue by removing the 'mesh<idx>' interface name from the configuration when the device
+# is no longer in mesh mode. As this modification is not present in the upstream version, it is necessary to apply
+# this local patch to resolve the inconsistency
+
+diff --git a/src/mesh11sd b/src/mesh11sd
+index 85041d3..5f50e97 100755
+--- a/src/mesh11sd
++++ b/src/mesh11sd
+@@ -387,45 +387,45 @@ elif [ "$1" = "daemon" ]; then
+ 
+ 		if [ $mode -eq 5 ]; then
+ 			# startup=4, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 4 ]; then
+ 			# startup=4, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 3 ]; then
+ 			# startup=0, statusmode=2, enabled=1
++			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started: mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 2 ]; then
+ 			# startup=0, statusmode=2, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 
+ 		elif [ $mode -eq 1 ]; then
+ 			# startup=0, statusmode=0, enabled=1
++			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 			startup=0
+ 			statusmode=0
+ 			mode=1
+-			syslogmessage="mesh11sd v$version has started, mesh management mode $mode"
+ 
+ 		elif [ $mode -eq 0 ]; then
+ 			# startup=0, statusmode=0, enabled=0
++			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 			startup=0
+ 			statusmode=2
+ 			mode=0
+-			syslogmessage="mesh11sd v$version has started: mesh status mode $mode"
+ 		fi
+ 
+ 		if [ $mode -ne $lastmode ]; then

feeds/morse/utils/morse_mesh11sd/patches/003-accton_fix_ifname_confliction.patch

@@ -0,0 +1,39 @@
+--- a/src/mesh11sd	2024-09-06 17:13:52.075070001 +0800
++++ b/src/mesh11sd	2024-09-06 17:47:36.326914438 +0800
+@@ -434,7 +434,6 @@
+ 		fi
+ 
+ 		lastmode=$mode
+-		meshindex=0
+ 
+ 		if [ "$enabled" = 1 ]; then
+ 			#get list of mesh configs
+@@ -443,16 +442,19 @@
+ 			if [ ! -z "$meshconfigs" ]; then
+ 				for meshconfig in $meshconfigs; do
+ 					ifname=$(uci get $meshconfig.ifname 2> /dev/null)
+-
+-					if [ -z "$ifname" ] || [ "$ifname" != "mesh$meshindex" ]; then
+-						# No interface name in config, so add one
+-						ucibatch="set $meshconfig.ifname='mesh$meshindex'"
+-						echo "$ucibatch" | uci batch
+-						changed=1
+-						syslogmessage="Setting mesh interface name to [ mesh$meshindex ]"
+-						write_to_syslog
++					device=$(uci -q get $meshconfig.device)
++					device_type=$(uci -q get wireless.$device.type)
++					new_ifname="halow_mesh"
++					if [ "$device_type" == "morse" ]; then
++						if [ -z "$ifname" ] || [ "$ifname" != "$new_ifname" ]; then
++							# No interface name in config, so add one
++							ucibatch="set $meshconfig.ifname='$new_ifname'"
++							echo "$ucibatch" | uci batch
++							changed=1
++							syslogmessage="Setting mesh interface name to [ $new_ifname ]"
++							write_to_syslog
++						fi
+ 					fi
+-					meshindex=$(($meshindex+1))
+ 				done
+ 
+ 				if [ "$changed" -eq 1 ]; then

feeds/morse/utils/wpa_supplicant_s1g/Config.in

@@ -2,7 +2,7 @@ if PACKAGE_wpa_supplicant_s1g
 
 	config MORSE_WPA_SUPPLICANT_S1G_MESH_NETWORKING
 		bool
-		default n
+		default y
 		prompt "Enable mesh networking support"
 
 	config MORSE_WPA_SUPPLICANT_S1G_EAP

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -43,6 +43,11 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for EAP105
 endef
 
+define Package/ath12k-wifi-emplus-wap7635
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for WAP7635
+endef
+
 define Package/ath12k-wifi-sonicfi-rap7110c-341x
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP7710c_341x
@@ -88,6 +93,11 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for NWA130BE
 endef
 
+define Package/ath12k-wifi-zyxel-nwa50be
+$(call Package/ath12k-wifi-default)
+    TITLE:=board-2.bin for NWA50BE
+endef
+
 define Package/ath12k-wifi-cig-wf672
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF672
@@ -96,8 +106,8 @@ endef
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wf189.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.wf189.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.wf189-us.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.wf189-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
 endef
 
 define Package/ath12k-wifi-edgecore-eap105/install
@@ -107,6 +117,13 @@ define Package/ath12k-wifi-edgecore-eap105/install
 	$(INSTALL_DATA) ./board-2.bin.eap105.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
+define Package/ath12k-wifi-emplus-wap7635/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.wap7635.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.wap7635.QCN6274 $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+endef
+
 define Package/ath12k-wifi-sonicfi-rap7110c-341x/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -144,8 +161,8 @@ endef
 define Package/ath12k-wifi-cig-wf189w/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189w.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.189w.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189w-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.189w-us.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
@@ -153,8 +170,8 @@ endef
 define Package/ath12k-wifi-cig-wf189h/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.189h-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.189h-us.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
@@ -179,15 +196,24 @@ define Package/ath12k-wifi-zyxel-nwa130be/install
 	$(INSTALL_DATA) ./board-2.bin.nwa130be.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
 endef
 
+define Package/ath12k-wifi-zyxel-nwa50be/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
+	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
+	$(INSTALL_DATA) ./board-2.bin.nwa50be.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.nwa50be.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
+endef
+
 define Package/ath12k-wifi-cig-wf672/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.wf672.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.wf672.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+	$(INSTALL_DATA) ./board-2.bin.wf672-us.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US
+	$(INSTALL_DATA) ./board-2.bin.wf672-us.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US
 endef
 
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
+$(eval $(call BuildPackage,ath12k-wifi-emplus-wap7635))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-h))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750e-s))
@@ -197,4 +223,5 @@ $(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
 $(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))
 $(eval $(call BuildPackage,ath12k-wifi-zyxel-nwa130be))
+$(eval $(call BuildPackage,ath12k-wifi-zyxel-nwa50be))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf672))

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa50be-IPQ5332.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
+                ],
+                "data": "nwa50be-IPQ5332.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=18"
+                ],
+                "data": "ipq5332.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/board-2-nwa50be-QCN6432.json

@@ -0,0 +1,20 @@
+[
+    {
+        "board": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=112"
+                ],
+                "data": "nwa50be-QCN6432.bin"
+            }
+        ],
+        "regdb": [
+            {
+                "names": [
+                    "bus=ahb,qmi-chip-id=0,qmi-board-id=112"
+                ],
+                "data": "ipq5332_qcn6432.regdb"
+            }
+        ]
+    }
+]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -18,3 +18,6 @@ $encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX
 
 $encoder -c board-2-nwa130be-IPQ5332.json -o board-2.bin.nwa130be.IPQ5332
 $encoder -c board-2-nwa130be-QCN92XX.json -o board-2.bin.nwa130be.QCN92XX
+
+$encoder -c board-2-nwa50be-IPQ5332.json -o board-2.bin.nwa50be.IPQ5332
+$encoder -c board-2-nwa50be-QCN6432.json -o board-2.bin.nwa50be.QCN6432

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/Makefile

@@ -24,7 +24,9 @@ endef
 
 define KernelPackage/cig-wifi-mode-sw/install
 	$(INSTALL_DIR) $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/init.d/
 	$(INSTALL_BIN) ./files/cig_wifi_mode_sw $(1)/usr/sbin/cig_wms
+	$(INSTALL_BIN) ./files/cig_wifi_mode_boot $(1)/etc/init.d/cig_wmb
 endef
 
 $(eval $(call KernelPackage,cig-wifi-mode-sw))

feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_boot

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+
+START=60
+
+boot(){
+	local bands=$(cat /proc/rf_switch)
+
+	if [ "x$bands" = "x3" ]; then
+		echo "AFC is not ready, switch to 2-band mode" >/dev/console
+		echo 2 > /proc/rf_switch
+		firstboot -y -r
+	fi
+}

feeds/qca-wifi-7/hostapd/files/afc_location.uc

@@ -4,19 +4,19 @@ let fs = require("fs");
 let ubus = require('ubus').connect();
 
 let gps_info = ubus.call('gps', 'info');
-let latitude = gps_info.latitude ?? 0;
-let longitude = gps_info.longitude ?? 0;
+let latitude = gps_info.latitude || 0;
+let longitude = gps_info.longitude || 0;
 
 // afc-location.json file content
 let afc_location = {};
 afc_location.location_type = "ellipse";
 afc_location.location = longitude + ":" + latitude ;
-afc_location.height = gps_info.elevation ?? 0;
+afc_location.height = gps_info.elevation || 0;
 afc_location.height_type = "AMSL";
-afc_location.major_axis = gps_info.major_axis ?? 0;
-afc_location.minor_axis = gps_info.minor_axis ?? 0;
-afc_location.orientation = gps_info.major_orientation ?? 0;
-afc_location.vertical_tolerance = gps_info.vdop ?? 0;
+afc_location.major_axis = int(gps_info.major_axis) || 1;
+afc_location.minor_axis = int(gps_info.minor_axis) || 1;
+afc_location.orientation = gps_info.major_orientation || 0;
+afc_location.vertical_tolerance = int(gps_info.vdop) || 1;
 
 let afc_location_json = fs.open("/etc/ucentral/afc-location.json", "w");
 afc_location_json.write(afc_location);

feeds/qca-wifi-7/hostapd/files/hostapd.uc

@@ -1,7 +1,8 @@
 let libubus = require("ubus");
-import { open, readfile } from "fs";
+import { open, readfile, writefile } from "fs";
 import { wdev_remove, is_equal, vlist_new, phy_is_fullmac, phy_open, wdev_set_radio_mask } from "common";
 
+let uci = require('uci').cursor();
 let ubus = libubus.connect(null, 60);
 
 hostapd.data.config = {};
@@ -1006,7 +1007,6 @@ let main_obj = {
 hostapd.data.ubus = ubus;
 hostapd.data.obj = ubus.publish("hostapd", main_obj);
 
-
 let auth_obj = {};
 hostapd.data.auth_obj = ubus.publish("hostapd-auth", auth_obj);
 
@@ -1026,10 +1026,24 @@ return {
 		hostapd.ubus.disconnect();
 	},
 	afc_request: function(iface, data) {
-		let ret = ubus.call("afc", "request", { data });
-		if (type(ret) != "object")
-			return;
-		return ret.data;
+		let wireless_config = uci.get_all('wireless');
+		for (let l, afc_server in wireless_config) {
+			if (afc_server['.type'] == 'afc-server' && afc_server.url && data) {
+				hostapd.printf(`Sending AFC request: ${data}`);
+				writefile("/tmp/afc-request.json", data);
+
+				if (afc_server.access_token)
+					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' -H \'Authorization: Bearer ${afc_server.access_token}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
+				else if (afc_server.cert)
+					system(`curl -s -X POST ${afc_server.url} -H \'accept: \*\/\*\' --cert \'${afc_server.cert}\' -H \'Content-Type: application/json\' -d \'${data}\' --output /tmp/afc-response.json`);
+
+				let afc_response = (readfile("/tmp/afc-response.json"));
+				if (afc_response)
+					return afc_response;
+				else
+					return;
+			}
+		}
 	},
 	bss_create: function(phy, name, obj) {
 		phy = hostapd.data.config[phy];

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,6 +7,11 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+emplus,wap7635)
+	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
+	ucidef_set_led_default "ledg" "LEDG" "sys:green" "off"
+	ucidef_set_led_default "ledr" "LEDR" "sys:red" "off"
+	;;
 sercomm,ap72tip-v4|\
 sercomm,ap72tip)
 	ucidef_set_led_default "power" "POWER" "blue:status" "on"

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -13,7 +13,6 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
 		;;
 	cig,wf189|\
-	cig,wf672|\
 	edgecore,eap105|\
 	sercomm,ap72tip|\
 	sonicfi,rap750w-311a)
@@ -21,7 +20,8 @@ ipq53xx_setup_interfaces()
 		;;
 	sonicfi,rap7110c-341x|\
 	sonicfi,rap750e-h|\
-	sonicfi,rap750e-s)
+	sonicfi,rap750e-s|\
+	zyxel,nwa50be)
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
 	cig,wf189w)
@@ -32,6 +32,10 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
 		;;
+	cig,wf672)
+		ucidef_set_interface_wan "eth0 eth1"
+		;;
+	emplus,wap7635|\
 	sercomm,ap72tip-v4)
 		ucidef_set_interface_wan "eth0"
 		;;	
@@ -104,6 +108,7 @@ qcom_setup_macs()
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
                 ;;
+        emplus,wap7635|\
         sercomm,ap72tip-v4)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
@@ -123,6 +128,16 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
 		;;
+	zyxel,nwa50be)
+		wan_mac=$(cat /proc/cmdline)
+		wan_mac="${wan_mac##*hwaddr=}"
+		wan_mac="${wan_mac%% *}"
+		wan_mac="$(echo ${wan_mac} | sed 's/\(..\)/\1:/g;s/:$//')"
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_label_macaddr $wan_mac
+		ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
+		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
+		;;
         *)
                 wan_mac=$(cat /sys/class/net/eth1/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -64,10 +64,12 @@ ath12k/IPQ5332/hw1.0/caldata.bin)
 	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
+	emplus,wap7635|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
-	zyxel,nwa130be)
-		caldata_extract "0:ART" 0x1000 0x20000 
+	zyxel,nwa130be|\
+	zyxel,nwa50be)
+		caldata_extract "0:ART" 0x1000 0x20000
 		;;
 	cig,wf672)
 		cig_ipq5322_cal
@@ -86,6 +88,7 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
+	emplus,wap7635|\
 	sercomm,ap72tip-v4|\
 	sercomm,ap72tip|\
 	zyxel,nwa130be)
@@ -122,6 +125,50 @@ ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi2@c0000000.bin)
 	cig,wf189w)
 		caldata_extract "0:ART" 0x58800 0x20000
 		;;
+	zyxel,nwa50be)
+		caldata_extract "0:ART" 0x58800 0x2d000
+		;;
+	esac
+	;;
+ath12k/IPQ5332/hw1.0/board-2.bin)
+	case "$board" in
+	cig,wf189|\
+	cig,wf189h|\
+	cig,wf189w|\
+	cig,wf672)
+                country=`cat /etc/ucentral/country`
+                if [ "$country" == "CA" ]; then
+                        ln -s /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.CA /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+                else
+                        ln -s /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin.US /lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
+                fi
+                ;;
+	esac
+	;;
+ath12k/QCN6432/hw1.0/board-2.bin)
+	case "$board" in
+	cig,wf189h|\
+	cig,wf189w)
+                country=`cat /etc/ucentral/country`
+                if [ "$country" == "CA" ]; then
+                        ln -s /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.CA /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+                else
+                        ln -s /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin.US /lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
+                fi
+                ;;
+	esac
+	;;
+ath12k/QCN92XX/hw1.0/board-2.bin)
+	case "$board" in
+	cig,wf189|\
+	cig,wf672)
+                country=`cat /etc/ucentral/country`
+                if [ "$country" == "CA" ]; then
+                        ln -s /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.CA /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+                else
+                        ln -s /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin.US /lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
+                fi
+                ;;
 	esac
 	;;
 *)

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/phy_quirks

@@ -9,14 +9,5 @@ boot() {
 	edgecore,eap105)
 		ssdk_sh debug phy set 0x1 0x601FD032 0xff
 		;;
-	zyxel,nwa130be)
-		#eth0: APPE: phyaddr 4  green:2.5G  orange:others
-		ssdk_sh debug phy set 4 0x40078074 0x670
-		ssdk_sh debug phy set 4 0x40078078 0x8600
-
-		#eth1:  MHT: phyaddr 3  green:2.5G orange:others
-		ssdk_sh debug phy set 3 0x40078074 0x670
-		ssdk_sh debug phy set 3 0x40078078 0x8600
-		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -136,7 +136,8 @@ platform_do_upgrade() {
 	sercomm,ap72tip|\
 	cig,wf189w|\
 	cig,wf189h|\
-	cig,wf189)
+	cig,wf189|\
+	emplus,wap7635)
 		if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
 			CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
 			CI_BOOTCFG=1
@@ -173,7 +174,8 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
-	zyxel,nwa130be)
+	zyxel,nwa130be|\
+	zyxel,nwa50be)
 		nand_upgrade_tar "$1"
 		;;
 	esac

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-emplus-wap7635.dts

@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5332.dtsi"
+#include "ipq5332-default-memory.dtsi"
+
+/ {
+	model = "Emplus WAP7635";
+	compatible = "emplus,wap7635", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0; /*console*/
+		ethernet0 = "/soc/dp1";
+
+        led-boot = &led_power_green;
+        led-failsafe = &led_power_red;
+        led-running = &led_power_green;
+        led-upgrade = &led_power_green;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@0 {
+		mdio:mdio@90000 {
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			phyaddr_fixup = <0xC90F018>;
+			uniphyaddr_fixup = <0xC90F014>;
+			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+
+		ess-instance {
+			/*num_devices = <0x1>;*/
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x2>; /* lan port bitmap */
+				switch_wan_bmp = <0>; /* wan port bitmap */
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <24>;
+						mdiobus = <&mdio>;
+						ethernet-phy-ieee802.3-c45;
+					};
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <1>;
+			reg = <0x3a500000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <24>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+			/* phy-mode = "usxgmii"; */
+		};
+
+		/* EDMA host driver configuration for the board */
+		edma@3ab00000 {
+			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
+			qcom,txdesc-rings = <12>;			/* Total number of Tx desc rings to be provisioned */
+			qcom,mht-txdesc-rings = <8>;		/* Extra Tx desc rings to be provisioned for MHT SW ports */
+			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
+			qcom,txcmpl-rings = <12>;			/* Total number of Tx complete rings to be provisioned */
+			qcom,mht-txcmpl-rings = <8>;		/* Extra Tx complete rings to be provisioned for mht sw ports. */
+			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
+			qcom,rxfill-rings = <4>;			/* Total number of Rx fill rings to be provisioned */
+			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
+			qcom,rxdesc-rings = <4>;			/* Total number of Rx desc rings to be provisioned */
+			qcom,rx-page-mode = <0>;			/* Rx fill ring page mode */
+			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
+			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
+			qcom,ppeds-num = <2>;				/* Number of PPEDS nodes */
+
+			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
+			qcom,ppeds-map = <1 1 1 1 32 8>,		/* PPEDS Node#0 ring and queue map */
+							 <2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
+			qcom,txdesc-map = <8 9 10 11>,			/* Port0 per-core Tx ring map */
+							  <12 13 14 15>,		/* MHT-Port1 per-core Tx ring map */
+							  <4 5 6 7>,			/* MHT-Port2 per-core Tx ring map/packets from  vp*/
+							  <16 17 18 19>,		/* MHT-Port3 per-core Tx ring map */
+							  <20 21 22 23>;		/* MHT-Port4 per-core Tx ring map */
+			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;	/* Per GMAC flow control group map */
+			qcom,rxfill-map = <4 5 6 7>;			/* Per-core Rx fill ring map */
+			qcom,rxdesc-map = <12 13 14 15>;		/* Per-core Rx desc ring map */
+			qcom,rx-queue-start = <0>;				/* Rx queue start */
+			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
+									 <1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
+									 <2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
+									 <3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
+									 <4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
+									 <5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
+									 <6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
+									 <7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
+			interrupts = <0 163 4>,					/* Tx complete ring id #4 IRQ info */
+						 <0 164 4>,					/* Tx complete ring id #5 IRQ info */
+						 <0 165 4>,					/* Tx complete ring id #6 IRQ info */
+						 <0 166 4>,					/* Tx complete ring id #7 IRQ info */
+						 <0 167 4>,					/* Tx complete ring id #8 IRQ info */
+						 <0 168 4>,					/* Tx complete ring id #9 IRQ info */
+						 <0 169 4>,					/* Tx complete ring id #10 IRQ info */
+						 <0 170 4>,					/* Tx complete ring id #11 IRQ info */
+						 <0 171 4>,					/* Tx complete ring id #12 IRQ info */
+						 <0 172 4>,					/* Tx complete ring id #13 IRQ info */
+						 <0 173 4>,					/* Tx complete ring id #14 IRQ info */
+						 <0 174 4>,					/* Tx complete ring id #15 IRQ info */
+						 <0 139 4>,					/* Rx desc ring id #12 IRQ info */
+						 <0 140 4>,					/* Rx desc ring id #13 IRQ info */
+						 <0 141 4>,					/* Rx desc ring id #14 IRQ info */
+						 <0 142 4>,					/* Rx desc ring id #15 IRQ info */
+						 <0 191 4>,					/* Misc error IRQ info */
+						 <0 155 4>,					/* RxFill ring id #4 IRQ info */
+						 <0 156 4>,					/* RxFill ring id #5 IRQ info */
+						 <0 157 4>,					/* RxFill ring id #6 IRQ info */
+						 <0 158 4>,					/* RxFill ring id #7 IRQ info */
+						 <0 160 4>,					/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
+						 <0 128 4>,					/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
+						 <0 152 4>,					/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
+						 <0 161 4>,					/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
+						 <0 129 4>,					/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
+						 <0 153 4>,					/* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
+						 <0 175 4>,					/* MHT port Tx complete ring id #16 IRQ info */
+						 <0 176 4>,					/* MHT port Tx complete ring id #17 IRQ info */
+						 <0 177 4>,					/* MHT port Tx complete ring id #18 IRQ info */
+						 <0 178 4>,					/* MHT port Tx complete ring id #19 IRQ info */
+						 <0 179 4>,					/* MHT port Tx complete ring id #20 IRQ info */
+						 <0 180 4>,					/* MHT port Tx complete ring id #21 IRQ info */
+						 <0 181 4>,					/* MHT port Tx complete ring id #22 IRQ info */
+						 <0 182 4>;					/* MHT port Tx complete ring id #23 IRQ info */
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_power_blue: led@34 {
+				label = "sys:blue";
+				gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+			led_power_green: led@35 {
+				label = "sys:green";
+				gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+			led_power_red: led@37 {
+				label = "sys:red";
+				gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		wsi: wsi {
+			id = <0>;
+			num_chip = <2>;
+			status = "okay";
+			chip_info = <0 1 1>,
+						<1 1 0>;
+		};
+	};
+};
+
+&wifi0 {
+	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	memory-region = <&q6_region>;
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <0>;
+	qcom,board_id = <0x16>;
+	status = "okay";
+};
+
+&mhi_region1 {
+	status = "okay";
+};
+
+&qcn9224_pcie1 {
+	status = "okay";
+};
+
+/* QCN9224 5G+6G */
+&wifi4 {
+	hremote_node = <&qcn9224_pcie1>;
+	board_id = <0x1019>;
+	node_id = <0x1>;
+	status = "okay";
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo {
+	clock-frequency = <24000000>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qspi_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nandcs@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&pcie1_phy_x2 {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pcie1_rp {
+		reg = <0 0 0 0 0>;
+
+		qcom,mhi@1 {
+			reg = <0 0 0 0 0>;
+			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
+						 0x4 0x4 0x18 0x3 0x0 0x0     /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
+						 0x0 0x4 0x0 0x0 0x0 0x0>;    /* End of arguments */
+			memory-region = <&qcn9224_pcie1>;
+			qcom,wsi = <&wsi>;
+			qcom,wsi_index = <1>;
+			qcom,board_id = <0x1019>;
+		};
+	};
+};
+
+/* PINCTRL */
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qspi_default_state: qspi-default-state {
+		qspi_clock {
+			pins = "gpio13";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qspi_cs {
+			pins = "gpio12";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		qspi_data {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	serial_1_pins: serial1-pinmux { /*ble*/
+		pins = "gpio33", "gpio35";
+		function = "blsp1_uart2";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	button_pins: button-state {
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-low;
+	};
+};
+
+&license_manager {
+	status = "okay";
+};
+
+&usb3 {
+	qcom,multiplexed-phy;
+	status = "disabled";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&ssuniphy_0 {
+	status = "okay";
+};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap7110c-341x.dts

@@ -31,6 +31,20 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@49c00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x49c00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
+	};
+
 	soc@0 {
 		mdio:mdio@90000 {
 			pinctrl-0 = <&mdio1_pins>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750e-h.dts

@@ -190,6 +190,14 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
+		ramoops@49c00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x49c00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
+
 		q6_mem_regions: q6_mem_regions@4A900000  {
 		        no-map;
 		        reg = <0x0 0x4A900000 0x0 0x5100000>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750e-s.dts

@@ -190,6 +190,14 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
+		ramoops@49c00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x49c00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
+
 		q6_mem_regions: q6_mem_regions@4A900000  {
 		        no-map;
 		        reg = <0x0 0x4A900000 0x0 0x5100000>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750w-311a.dts

@@ -190,6 +190,14 @@
 		/delete-node/ wcnss@4a900000;
 		/delete-node/ q6_caldb_region@4ce00000;
 
+		ramoops@49c00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x49c00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
+
 		q6_mem_regions: q6_mem_regions@4A900000  {
 		        no-map;
 		        reg = <0x0 0x4A900000 0x0 0x5100000>;

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-zyxel-nwa130be.dts

@@ -18,6 +18,21 @@
 	model = "Zyxel NWA130BE";
 	compatible = "zyxel,nwa130be", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332-rdp468", "qcom,ipq5332";
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@49c00000 {
+			compatible = "ramoops";
+			no-map;
+			reg = <0x0 0x49c00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
+	};
+
 	aliases {
 		serial0 = &blsp1_uart0;
 		serial1 = &blsp1_uart1;
@@ -128,6 +143,26 @@
 					blink_en = "enable";
 					active = "high";
 				};
+
+				qcom,port_ledinfo {
+					port@1 {
+						port = <2>;
+						led_source@0 {
+							source = <0>;
+							mode = "normal";
+							speed = "2500M";
+							active = "high";
+							blink_en = "enable";
+						};
+						led_source@1 {
+							source = <1>;
+							mode = "normal";
+							speed = "10M", "100M","1000M";
+							active = "high";
+							blink_en = "enable";
+						};
+					};
+				};
 			};
 
 			ess-switch1@1 {
@@ -164,6 +199,26 @@
 					};
 				};
 
+				qcom,port_ledinfo {
+					port@3 {
+						port = <3>;
+						led_source@0 {
+							source = <0>;
+							mode = "normal";
+							speed = "2500M";
+							active = "high";
+							blink_en = "enable";
+						};
+						led_source@1 {
+							source = <1>;
+							mode = "normal";
+							speed = "10M", "100M","1000M";
+							active = "high";
+							blink_en = "enable";
+						};
+					};
+				};
+
 				led_source@2 {
 					source = <2>;
 					mode = "normal";

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-zyxel-nwa50be.dts

@@ -0,0 +1,956 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5332 RDP442 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq5332-default-memory.dtsi"
+
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332/RDP442/AP-MI01.3";
+	compatible = "zyxel,nwa50be", "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332-rdp442", "qcom,ipq5332";
+
+#ifdef __IPQ_MEM_PROFILE_512_MB__
+
+	/*     512M  Layout for IPQ5332 + QCN6432 + QCN6432
+	 * +==========+==============+========================+
+	 * |         |              |                         |
+	 * |  Region | Start Offset |          Size           |
+	 * |         |              |                         |
+	 * +---------+--------------+-------------------------+
+	 * |   Q6    |              |                         |
+	 * |  code/  |  0x4A900000  |          25MB           |
+	 * |  data   |              |                         |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * |  data   |  0x4C200000  |          17MB           |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * | M3 Dump |  0x4D300000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * |  QDSS   |  0x4D400000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * | IPQ5332 |              |                         |
+	 * |  CALDB  |  0x4D500000  |           3MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * |  data   |  0x4D800000  |          16MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * | M3 Dump |  0x4E800000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * |  QDSS   |  0x4E900000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_1|              |                         |
+	 * |  CALDB  |  0x4EA00000  |           5MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * |  data   |  0x4EF00000  |          16MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * | M3 Dump |  0x4FF00000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * |  QDSS   |  0x50000000  |           1MB           |
+	 * +---------+--------------+-------------------------+
+	 * |QCN6432_2|              |                         |
+	 * |  CALDB  |  0x50100000  |           5MB           |
+	 * +---------+--------------+-------------------------+
+	 * |         |              |                         |
+	 * |   MLO   |  0x50600000  |          12MB           |
+	 * +==================================================+
+	 * |                                                  |
+	 * |                                                  |
+	 * |                                                  |
+	 * |             Rest of memory for Linux             |
+	 * |                                                  |
+	 * |                                                  |
+	 * |                                                  |
+	 * +==================================================+
+	 */
+
+	reserved-memory {
+
+		/delete-node/ m3_dump@4cc00000;
+		/delete-node/ q6_etr_dump@1;
+		/delete-node/ mlo_global_mem_0@0x4db00000;
+		/delete-node/ wcnss@4a900000;
+		/delete-node/ q6_caldb_region@4ce00000;
+
+		q6_mem_regions: q6_mem_regions@4A900000  {
+			reg = <0x0 0x4a900000 0x0 0x5D00000>;
+			no-map;
+		};
+
+		q6_code_data: q6_code_data@4A900000 {
+			reg = <0x0 0x4a900000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
+			reg = <0x0 0x4C200000 0x0 0x1100000>;
+			no-map;
+		};
+
+		m3_dump: m3_dump@4D300000 {
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_etr_region: q6_etr_dump@4D400000 {
+			reg = <0x0 0x4D400000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_ipq5332_caldb: q6_ipq5332_caldb@4D500000 {
+			reg = <0x0 0x4D500000 0x0 0x300000>;
+			no-map;
+		};
+
+		q6_qcn6432_data_1: q6_qcn6432_data_1@4D800000 {
+			reg = <0x0 0x4D800000 0x0 0x1000000>;
+			no-map;
+		};
+
+		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4E800000 {
+			reg = <0x0 0x4E800000 0x0 0x100000>;
+			no-map;
+                };
+
+		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4E900000 {
+			reg = <0x0 0x4E900000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4EA00000 {
+			reg = <0x0 0x4EA00000 0x0 0x500000>;
+			no-map;
+		};
+
+		q6_qcn6432_data_2: q6_qcn6432_data_2@4EF00000 {
+			reg = <0x0 0x4EF00000 0x0 0x1000000>;
+			no-map;
+		};
+
+		m3_dump_qcn6432_2: m3_dump_qcn6432_2@4FF00000 {
+			reg = <0x0 0x4FF00000 0x0 0x100000>;
+			no-map;
+                };
+
+		q6_qcn6432_etr_2: q6_qcn6432_etr_2@50000000 {
+			reg = <0x0 0x50000000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@50100000 {
+			reg = <0x0 0x50100000 0x0 0x500000>;
+			no-map;
+		};
+
+		mlo_global_mem0: mlo_global_mem_0@50600000 {
+			reg = <0x0 0x50600000 0x0 0xC00000>;
+			no-map;
+		};
+	};
+#else
+
+	/*  1G  Layout for IPQ5332 + QCN6432 + QCN6432
+	* +==========+==============+========================+
+	* |         |              |                         |
+	* |  Region | Start Offset |          Size           |
+	* |         |              |                         |
+	* +---------+--------------+-------------------------+
+	* |   Q6    |              |                         |
+	* |  code/  |  0x4A900000  |          25MB           |
+	* |  data   |              |                         |
+	* +---------+--------------+-------------------------+
+	* | IPQ5332 |              |                         |
+	* |  data   |  0x4C200000  |          21MB           |
+	* +---------+--------------+-------------------------+
+	* | IPQ5332 |              |                         |
+	* | M3 Dump |  0x4D700000  |           1MB           |
+	* +---------+--------------+-------------------------+
+	* | IPQ5332 |              |                         |
+	* |  QDSS   |  0x4D800000  |           1MB           |
+	* +---------+--------------+-------------------------+
+	* | IPQ5332 |              |                         |
+	* |  CALDB  |  0x4D900000  |           5MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_1|              |                         |
+	* |  data   |  0x4DE00000  |          21MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_1|              |                         |
+	* | M3 Dump |  0x4F300000  |           1MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_1|              |                         |
+	* |  QDSS   |  0x4F400000  |           1MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_1|              |                         |
+	* |  CALDB  |  0x4F500000  |           5MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_2|              |                         |
+	* |  data   |  0x4FA00000  |          21MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_2|              |                         |
+	* | M3 Dump |  0x50F00000  |           1MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_2|              |                         |
+	* |  QDSS   |  0x51000000  |           1MB           |
+	* +---------+--------------+-------------------------+
+	* |QCN6432_2|              |                         |
+	* |  CALDB  |  0x51100000  |           5MB           |
+	* +---------+--------------+-------------------------+
+	* |         |              |                         |
+	* |   MLO   |  0x51600000  |          12MB           |
+	* +==================================================+
+	* |                                                  |
+	* |                                                  |
+	* |                                                  |
+	* |             Rest of memory for Linux             |
+	* |                                                  |
+	* |                                                  |
+	* |                                                  |
+	* +==================================================+
+	*/
+	reserved-memory {
+
+		/delete-node/ m3_dump@4cc00000;
+		/delete-node/ q6_etr_dump@1;
+		/delete-node/ mlo_global_mem_0@0x4db00000;
+		/delete-node/ wcnss@4a900000;
+		/delete-node/ q6_caldb_region@4ce00000;
+
+		ramoops@49c00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x49c00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+		};
+
+		q6_mem_regions: q6_mem_regions@4A900000  {
+			no-map;
+			reg = <0x0 0x4a900000 0x0 0x6D00000>;
+		};
+
+		q6_code_data: q6_code_data@4A900000 {
+			no-map;
+			reg = <0x0 0x4a900000 0x0 0x1900000>;
+		};
+
+		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
+			no-map;
+			reg = <0x0 0x4C200000 0x0 0x1500000>;
+		};
+
+		m3_dump: m3_dump@4D700000 {
+			no-map;
+			reg = <0x0 0x4D700000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D800000 {
+			no-map;
+			reg = <0x0 0x4D800000 0x0 0x100000>;
+		};
+
+		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
+			no-map;
+			reg = <0x0 0x4D900000 0x0 0x500000>;
+		};
+
+		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
+			no-map;
+			reg = <0x0 0x4DE00000 0x0 0x1500000>;
+		};
+
+		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+        };
+
+		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+
+		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
+			no-map;
+			reg = <0x0 0x4F500000 0x0 0x500000>;
+		};
+
+		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
+			no-map;
+			reg = <0x0 0x4FA00000 0x0 0x1500000>;
+		};
+
+		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
+			no-map;
+			reg = <0x0 0x50F00000 0x0 0x100000>;
+		};
+
+		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
+			no-map;
+			reg = <0x0 0x51000000 0x0 0x100000>;
+		};
+
+		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
+			no-map;
+			reg = <0x0 0x51100000 0x0 0x500000>;
+		};
+
+		mlo_global_mem0: mlo_global_mem_0@51600000 {
+			no-map;
+			reg = <0x0 0x51600000 0x0 0xC00000>;
+		};
+	};
+#endif
+
+	aliases {
+		serial0 = &blsp1_uart0;
+		serial1 = &blsp1_uart1;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc@0 {
+		mdio:mdio@90000 {
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			/*gpio22 is for wan napa, gpio51 for lan napa*/
+			phy-reset-gpio = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			phy2: ethernet-phy@2 {
+				reg = <28>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&led_pins>;
+			pinctrl-names = "default";
+			led_blue{
+				label = "led_blue";
+				gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "led_blue";
+				default-state = "off";
+			};
+			led_green {
+				label = "led_green";
+				gpio = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "led_green";
+				default-state = "on";
+			};
+			led_white {
+				label = "led_white";
+				gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "led_white";
+				default-state = "off";
+			};
+			led_red {
+				label = "led_red";
+				gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "led_red";
+				default-state = "off";
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		ess-instance {
+			ess-switch@3a000000 {
+				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x4>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>; /* wan port bitmap */
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance0*/
+				switch_mac_mode1 = <0xc>; /* mac mode for uniphy instance1*/
+				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <2>;
+						phy_address = <28>;
+					};
+				};
+				qcom,port_ledinfo {
+					port@0 {
+						port = <2>;
+						led_source@0 {
+							source = <0>;
+							mode = "normal";
+							speed = "2500M";
+							active = "high";
+							blink_en = "enable";
+						};
+						led_source@1 {
+							source = <1>;
+							mode = "normal";
+							speed = "10M", "100M","1000M";
+							active = "high";
+							blink_en = "enable";
+						};
+					};
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <2>;
+			reg = <0x3a504000 0x4000>;
+			qcom,mactype = <1>;
+			local-mac-address = [000000000000];
+			mdio-bus = <&mdio>;
+			qcom,phy-mdio-addr = <28>;
+			qcom,link-poll = <1>;
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec0 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <28>;
+			mdiobus = <&mdio>;
+		};
+
+		/* EDMA host driver configuration for the board */
+		edma@3ab00000 {
+			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
+			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
+			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
+			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
+			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
+			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
+			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
+			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
+			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
+			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
+			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
+			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
+			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
+			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
+			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
+			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
+					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
+			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
+					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
+					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
+					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
+					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
+			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
+			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
+			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
+			qcom,rx-queue-start = <0>;		/* Rx queue start */
+			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
+						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
+						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
+						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
+						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
+						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
+						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
+						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
+			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
+				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
+				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
+				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
+				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
+				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
+				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
+				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
+				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
+				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
+				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
+				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
+				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
+				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
+				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
+				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
+				   <0 191 4>,			/* Misc error IRQ info */
+				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
+				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
+				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
+				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
+				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
+				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
+				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
+				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
+				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
+				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
+				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
+				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
+				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
+				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
+		};
+
+		wsi: wsi {
+			id = <0>;
+			num_chip = <2>;
+			chip_info = <0 1 1>,
+				    <1 1 0>;
+		};
+
+		q6v5_wcss: remoteproc@d100000 {
+			boot-args = <0x1 0x4 0x3 0x0 0x26 0x2>,
+					<0x1 0x4 0x4 0x1 0x2f 0x2>;
+			memory-region = <&q6_mem_regions>;
+
+			/delete-node/ remoteproc_pd1;
+			/delete-node/ remoteproc_pd2;
+			/delete-node/ remoteproc_pd3;
+
+			q6_wcss_pd4: remoteproc_pd4 {
+				compatible = "qcom,ipq5332-mpd-upd-text";
+				firmware = "IPQ5332/q6_fw4.mdt";
+
+				q6_wcss_pd1: remoteproc_pd1 {
+					compatible = "qcom,ipq5332-wcss-ahb-mpd";
+					firmware = "IPQ5332/q6_fw1.mdt";
+					m3_firmware = "IPQ5332/iu_fw.mdt";
+					interrupts-extended = <&wcss_smp2p_in 8 0>,
+							<&wcss_smp2p_in 9 0>,
+							<&wcss_smp2p_in 12 0>,
+							<&wcss_smp2p_in 11 0>;
+					interrupt-names = "fatal",
+							"ready",
+							"spawn-ack",
+							"stop-ack";
+
+					qcom,smem-states = <&wcss_smp2p_out 8>,
+							<&wcss_smp2p_out 9>,
+							<&wcss_smp2p_out 10>;
+					qcom,smem-state-names = "shutdown",
+								"stop",
+								"spawn";
+					memory-region = <&q6_ipq5332_data>,
+							<&m3_dump>,
+							<&q6_etr_region>,
+							<&q6_ipq5332_caldb>;
+				};
+
+				q6_wcss_pd2: remoteproc_pd2 {
+					compatible = "qcom,ipq5332-wcss-pcie-mpd";
+					firmware = "IPQ5332/q6_fw2.mdt";
+					m3_firmware = "qcn6432/iu_fw.mdt";
+					interrupts-extended = <&wcss_smp2p_in 16 0>,
+							<&wcss_smp2p_in 17 0>,
+							<&wcss_smp2p_in 20 0>,
+							<&wcss_smp2p_in 19 0>;
+					interrupt-names = "fatal",
+							"ready",
+							"spawn-ack",
+							"stop-ack";
+
+					qcom,smem-states = <&wcss_smp2p_out 16>,
+							<&wcss_smp2p_out 17>,
+							<&wcss_smp2p_out 18>;
+					qcom,smem-state-names = "shutdown",
+								"stop",
+								"spawn";
+					memory-region = <&q6_qcn6432_data_1>,
+							<&m3_dump_qcn6432_1>,
+							<&q6_qcn6432_etr_1>,
+							<&q6_qcn6432_caldb_1>;
+					status = "okay";
+				};
+
+				q6_wcss_pd3: remoteproc_pd3 {
+					compatible = "qcom,ipq5332-wcss-pcie-mpd";
+					firmware = "IPQ5332/q6_fw3.mdt";
+					interrupts-extended = <&wcss_smp2p_in 24 0>,
+							<&wcss_smp2p_in 25 0>,
+							<&wcss_smp2p_in 28 0>,
+							<&wcss_smp2p_in 27 0>;
+					interrupt-names = "fatal",
+							"ready",
+							"spawn-ack",
+							"stop-ack";
+
+					qcom,smem-states = <&wcss_smp2p_out 24>,
+							<&wcss_smp2p_out 25>,
+							<&wcss_smp2p_out 26>;
+					qcom,smem-state-names = "shutdown",
+								"stop",
+								"spawn";
+					memory-region = <&q6_qcn6432_data_2>,
+							<&m3_dump_qcn6432_2>,
+							<&q6_qcn6432_etr_2>,
+							<&q6_qcn6432_caldb_2>;
+					status = "okay";
+				};
+			};
+		};
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+        pinctrl-0 = <&serial_1_pins>;
+        pinctrl-names = "default";
+        status = "disabled";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "n25q128a11", "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo {
+	clock-frequency = <24000000>;
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qspi_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nandcs@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+/* PINCTRL */
+
+&tlmm {
+
+	led_pins: led_pins {
+		board_info {
+			pins = "gpio2", "gpio3";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			input-enable;
+		};
+
+		apd_dc_in {
+			pins = "gpio24";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down; //Adapter un-plug
+			input-enable;
+		};
+
+		poe_status {
+			pins = "gpio34";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up; //AF
+			input-enable;
+		};
+
+		/* To MR pin */
+		rst_mb {
+			pins = "gpio29";
+			function = "gpio";
+			drive-strength = <8>;
+			output-high;
+		};
+
+		led_blue {
+			pins = "gpio22";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_green {
+			pins = "gpio45";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_white {
+			pins = "gpio43";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_red {
+			pins = "gpio44";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qspi_default_state: qspi-default-state {
+		qspi_clock {
+			pins = "gpio13";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qspi_cs {
+			pins = "gpio12";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		qspi_data {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	serial_1_pins: serial1-pinmux {
+		pins = "gpio33", "gpio34", "gpio35", "gpio36";
+		function = "blsp1_uart2";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	button_pins: button-state {
+		pins = "gpio35";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	pwm_pins: pwm-state {
+		pins = "gpio46";
+		function = "pwm0";
+		drive-strength = <8>;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	mdio1_pins: mdio1-state {
+		mux_0 {
+			pins = "gpio27";
+			function = "mdc1";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio28";
+			function = "mdio1";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&license_manager {
+	status = "okay";
+};
+
+&usb3 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+
+	dwc3@8a00000 {
+		/delete-property/ #phy-cells;
+		/delete-property/ phys;
+		/delete-property/ phy-names;
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hs_m31phy_0 {
+	status = "okay";
+};
+
+&wifi0 {
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
+	qcom,caldb-addr = <0x4D900000 0x4D500000 0x0 0x0 0x0 0x0>;
+#ifdef __IPQ_MEM_PROFILE_512_MB__
+	qcom,tgt-mem-mode = <1>;
+	qcom,caldb-size = <0x300000>;
+#else
+	qcom,tgt-mem-mode = <0>;
+	qcom,caldb-size = <0x500000>;
+#endif
+	qcom,board_id = <0x12>;
+#if defined(__CNSS2__)
+	mem-region = <&q6_ipq5332_data>;
+#else
+	memory-region = <&q6_ipq5332_data>;
+#endif
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <0>;
+	status = "okay";
+};
+
+&wifi1 {
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd2>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,bdf-addr = <0x4DE00000 0x4D800000 0x0 0x0 0x0 0x0>;
+	qcom,caldb-addr = <0x4F500000 0x4EA00000 0x0 0x0 0x0 0x0>;
+	qcom,umac-irq-reset-addr = <0x20000884>;
+	qcom,caldb-size = <0x500000>;
+#ifdef __IPQ_MEM_PROFILE_512_MB__
+	qcom,tgt-mem-mode = <1>;
+#else
+	qcom,tgt-mem-mode = <0>;
+#endif
+	qcom,board_id = <0x060>;
+#if defined(__CNSS2__)
+	mem-region = <&q6_qcn6432_data_1>;
+#else
+	memory-region = <&q6_qcn6432_data_1>;
+#endif
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <1>;
+	status = "disabled";
+	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "umac_reset";
+};
+
+&wifi2 {
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd3>;
+	qcom,rproc_rpd = <&q6v5_wcss>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,bdf-addr = <0x4FA00000 0x4EF00000 0x4FA00000 0x0 0x0 0x0>;
+	qcom,caldb-addr = <0x51100000 0x50100000 0x51100000 0x0 0x0 0x0>;
+	qcom,umac-irq-reset-addr = <0x18000884>;
+	qcom,caldb-size = <0x500000>;
+#ifdef __IPQ_MEM_PROFILE_512_MB__
+	qcom,tgt-mem-mode = <1>;
+#else
+	qcom,tgt-mem-mode = <0>;
+#endif
+	qcom,board_id = <0x070>;
+#if defined(__CNSS2__)
+	mem-region = <&q6_qcn6432_data_2>;
+#else
+	memory-region = <&q6_qcn6432_data_2>;
+#endif
+	qcom,wsi = <&wsi>;
+	qcom,wsi_index = <1>;
+	qcom,wide_band = <1>;
+	status = "okay";
+	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "umac_reset";
+};

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -52,6 +52,19 @@ define Device/edgecore_eap105
 endef
 TARGET_DEVICES += edgecore_eap105
 
+define Device/emplus_wap7635
+  DEVICE_TITLE := EMPLUS WAP7635
+  DEVICE_DTS := ipq5332-emplus-wap7635
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_CONFIG := config@mi01.6
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/nand-factory.ubi := append-ubi
+  DEVICE_PACKAGES := ath12k-wifi-emplus-wap7635 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
+endef
+TARGET_DEVICES += emplus_wap7635
+
 define Device/sonicfi_rap7110c_341x
   DEVICE_TITLE := SONICFI RAP7110C-341X
   DEVICE_DTS := ipq5332-sonicfi-rap7110c-341x
@@ -149,6 +162,22 @@ define Device/zyxel_nwa130be
 endef
 TARGET_DEVICES += zyxel_nwa130be
 
+
+define Device/zyxel_nwa50be
+  DEVICE_TITLE := Zyxel NWA50BE
+  DEVICE_DTS := ipq5332-zyxel-nwa50be
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_CONFIG := config@mi01.3
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+  IMAGE/nand-factory.ubi := append-ubi
+  DEVICE_PACKAGES := ath12k-wifi-zyxel-nwa50be ath12k-firmware-ipq5332-peb-peb -ath12k-firmware-qcn92xx
+endef
+TARGET_DEVICES += zyxel_nwa50be
+
 define Device/cig_wf672
   DEVICE_TITLE := CIG WF672
   DEVICE_DTS := ipq5332-cig-wf672

feeds/qca-wifi-7/mac80211/patches-zyxel_nwa50be/ath12k/0001-thermal-thermal-setting.patch

@@ -0,0 +1,74 @@
+From 357da3320f8bcad056b905fb85cad3a29c343d31 Mon Sep 17 00:00:00 2001
+From: YenLin Pan <yenlin.pan@zyxel.com.tw>
+Date: Tue, 12 Aug 2025 15:41:39 +0800
+Subject: [PATCH] thermal: thermal setting
+
+lo0 -100 -hi0 105 -off0 0
+lo1 95 -hi1 110 -off1 20
+lo2 100 -hi2 115 -off2 60
+lo3 105 -hi3 119 -off3 98
+
+Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
+---
+ drivers/net/wireless/ath/ath12k/thermal.h | 34 +++++++++++------------
+ 1 file changed, 17 insertions(+), 17 deletions(-)
+
+diff --git a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
+index 5c91906..e81f9a4 100644
+--- a/drivers/net/wireless/ath/ath12k/thermal.h
++++ b/drivers/net/wireless/ath/ath12k/thermal.h
+@@ -13,34 +13,34 @@
+ 
+ /* Below temperatures are in celsius */
+ #define ATH12K_THERMAL_LVL0_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 100
++#define ATH12K_THERMAL_LVL0_TEMP_HIGH_MARK 105
+ #define ATH12K_THERMAL_LVL1_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL1_TEMP_HIGH_MARK 110
+ #define ATH12K_THERMAL_LVL2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL2_TEMP_HIGH_MARK 115
+ #define ATH12K_THERMAL_LVL3_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
++#define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 119
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 105
++#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
++#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 110
++#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
++#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
++#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 105
++#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 119
+ #define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
+ #define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+-#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+-#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 90
+-#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 100
++#define ATH12K_THERMAL_LVL1_DUTY_CYCLE 20
++#define ATH12K_THERMAL_LVL2_DUTY_CYCLE 60
++#define ATH12K_THERMAL_LVL3_DUTY_CYCLE 98
+ 
+ #define ATH12K_THERMAL_LVL0_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL0_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
+-#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
++#define ATH12K_THERMAL_LVL1_V2_DUTY_CYCLE ATH12K_THERMAL_LVL1_DUTY_CYCLE
++#define ATH12K_THERMAL_LVL2_V2_DUTY_CYCLE ATH12K_THERMAL_LVL2_DUTY_CYCLE
++#define ATH12K_THERMAL_LVL3_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
+ #define ATH12K_THERMAL_LVL4_V2_DUTY_CYCLE ATH12K_THERMAL_LVL3_DUTY_CYCLE
+ 
+ #define THERMAL_CONFIG_POUT0                        0
+-- 
+2.34.1
+

feeds/qca-wifi-7/qca-ssdk-qca/Makefile

@@ -100,6 +100,7 @@ endif
 ifdef CONFIG_TARGET_PROFILE
 TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
 PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
+FILES_PROFILE_NAME=files-$(subst DEVICE_,,$(TARGET_PROFILE))
 endif
 
 QCASSDK_CONFIG_OPTS+= TOOL_PATH=$(TOOLCHAIN_BIN_PATH) \
@@ -202,6 +203,15 @@ define patch_profile
 	$(call PatchDir/Default,$(PKG_BUILD_DIR),./$(PATCH_PROFILE_NAME))
 endef
 
+define files_profile
+
+	if [ -d "./$(FILES_PROFILE_NAME)" ]; then \
+		$(CP) ./$(FILES_PROFILE_NAME)/* ./files/ ; \
+	fi
+endef
+
 Hooks/Prepare/Post += patch_profile
+Hooks/Prepare/Post += files_profile
+
 $(eval $(call KernelPackage,qca-ssdk-qca-nohnat))
 $(eval $(call KernelPackage,qca-ssdk-qca-hnat))

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa130be/qca-ssdk

@@ -0,0 +1,317 @@
+#!/bin/sh /etc/rc.common
+# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
+# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+#
+
+START=16
+
+#!/bin/sh
+ruletype="ip4 ip6"
+side="wan lan"
+qwan="1 3 2 0 5 7 6 4"
+qlan="0 1 2 3 4 5 6 7"
+
+function create_war_acl_rules(){
+	for lw in $side
+	do
+		#echo $lw
+		if [ "$lw" == "wan" ];then
+			listid=254
+			queue=$qwan
+			portmap=0x20
+		else
+			listid=255
+			queue=$qlan
+			portmap=0x1e
+		fi
+		#echo $queue
+		#echo "creating list $listid"
+		ssdk_sh acl list create $listid 255
+		ruleid=0
+		for rt in $ruletype
+		do
+			for qid in $queue
+			do
+				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
+				#echo $cmd
+				if [ "$rt" == "ip4" ];then
+					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
+					#echo $cmd
+				else
+					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
+					#echo $cmd
+				fi
+				if [ $ruleid -le 3 ];then
+					#non-zero dscp
+					cmd="$cmd y 0x0 0xff"
+				elif [ $ruleid -le 7 ];then
+					#zero dscp
+					cmd="$cmd n"
+				elif [ $ruleid -le 11 ];then
+					#non-zero dscp
+					cmd="$cmd y 0x0 0xff"
+				else
+					#zero dscp
+					cmd="$cmd n"
+				fi
+				p=$((ruleid/2))
+				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
+				#echo $cmd
+				$cmd
+				ruleid=`expr $ruleid + 1`
+			done
+		done
+		ssdk_sh acl list bind $listid 0 1 $portmap
+	done
+}
+
+function create_war_cosmap(){
+	ssdk_sh cosmap pri2q set 0 0
+	ssdk_sh cosmap pri2q set 1 0
+	ssdk_sh cosmap pri2q set 2 0
+	ssdk_sh cosmap pri2q set 3 0
+	ssdk_sh cosmap pri2q set 4 1
+	ssdk_sh cosmap pri2q set 5 1
+	ssdk_sh cosmap pri2q set 6 1
+	ssdk_sh cosmap pri2q set 7 1
+	ssdk_sh cosmap pri2ehq set 0 0
+	ssdk_sh cosmap pri2ehq set 1 0
+	ssdk_sh cosmap pri2ehq set 2 0
+	ssdk_sh cosmap pri2ehq set 3 0
+	ssdk_sh cosmap pri2ehq set 4 1
+	ssdk_sh cosmap pri2ehq set 5 1
+	ssdk_sh cosmap pri2ehq set 6 1
+	ssdk_sh cosmap pri2ehq set 7 1
+}
+
+function create_acl_byp_egstp_rules(){
+	chip_ver=$1
+	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
+	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		cmd="$cmd 0"
+	fi
+	#echo $cmd
+	$cmd
+
+	ssdk_sh acl list create 56 48
+	#action bypass eg stp check
+	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
+	if [ "$chip_ver" == "0x2000" ]; then
+		action="$action n n 0"
+	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		action="$action n n n 0"
+	else
+		action="$action 0"
+	fi
+
+	for ruleid in $( seq 0 2 )
+	do
+		if [ "$ruleid" == "0" ];then
+			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
+		elif [ "$ruleid" == "1" ];then
+			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
+		else
+			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
+		fi
+		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+			cmd="$cmd n $action"
+		else
+			cmd="$cmd $action"
+		fi
+		#echo $cmd
+		$cmd
+	done
+	ssdk_sh acl list bind 56 0 2 1
+}
+
+function delete_war_acl_rules(){
+	for lw in $side
+	do
+		#echo $lw
+		if [ "$lw" == "wan" ];then
+			listid=254
+			queue=$qwan
+			portmap=0x20
+		else
+			listid=255
+			queue=$qlan
+			portmap=0x1e
+		fi
+		ssdk_sh acl list unbind $listid 0 1 $portmap
+		for rt in $ruletype
+		do
+			for qid in $queue
+			do
+				cmd="ssdk_sh acl rule del $listid 0 1"
+				echo $cmd
+				$cmd
+			done
+		done
+		#echo "deleting list $listid"
+		ssdk_sh acl list destroy $listid
+	done
+}
+
+function delete_war_cosmap(){
+	ssdk_sh cosmap pri2q set 0 0
+	ssdk_sh cosmap pri2q set 1 0
+	ssdk_sh cosmap pri2q set 2 1
+	ssdk_sh cosmap pri2q set 3 1
+	ssdk_sh cosmap pri2q set 4 2
+	ssdk_sh cosmap pri2q set 5 2
+	ssdk_sh cosmap pri2q set 6 3
+	ssdk_sh cosmap pri2q set 7 3
+	ssdk_sh cosmap pri2ehq set 0 1
+	ssdk_sh cosmap pri2ehq set 1 0
+	ssdk_sh cosmap pri2ehq set 2 2
+	ssdk_sh cosmap pri2ehq set 3 2
+	ssdk_sh cosmap pri2ehq set 4 3
+	ssdk_sh cosmap pri2ehq set 5 3
+	ssdk_sh cosmap pri2ehq set 6 4
+	ssdk_sh cosmap pri2ehq set 7 5
+}
+
+function delete_acl_byp_egstp_rules(){
+	chip_ver=$1
+	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
+	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		cmd="$cmd 0"
+	fi
+	#echo $cmd
+	$cmd
+	ssdk_sh acl list unbind 56 0 2 1
+	ssdk_sh acl rule del 56 0 1
+	ssdk_sh acl rule del 56 1 1
+	ssdk_sh acl rule del 56 2 1
+	ssdk_sh acl list destroy 56
+}
+
+function edma_war_config_add(){
+	create_war_cosmap
+	ssdk_sh acl status set enable
+	create_war_acl_rules
+}
+
+function edma_war_config_del(){
+	delete_war_acl_rules
+	delete_war_cosmap
+}
+
+function ipq50xx_serdes_monitor () {
+	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
+	port_id=2
+	old_linkstatus="DISABLE"
+	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
+	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
+		ssdk_sh debug phy set 29 0xb 0x300d
+		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
+
+		while true
+		do
+			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
+			#when qca808x phy link status is from down to up, serdes tx would be enabled
+			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
+				ssdk_sh debug phy set 29 0xb 0xb00d
+				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
+			fi
+			#when qca808x phy link status is from up to down, serdes tx would be disabled
+			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
+				ssdk_sh debug phy set 29 0xb 0x300d
+				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
+			fi
+			old_linkstatus=$cur_linkstatus
+		done
+	fi
+}
+
+function ipq53xx_phy_amplitude_set () {
+	#for qca808x phy sgmii, set half amplitude with src_half_swing register
+	port_id=2
+	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
+	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd180" ]; then
+		ssdk_sh debug phy set 5 0x40010087 0x208a
+		ssdk_sh debug phy set 6 0x40010087 0x208a
+		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
+		ampl_val=$(eval "ssdk_sh debug phy get 5 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
+		ssdk_sh debug phy set 5 0x40010067 $ampl_val
+		ampl_val=$(eval "ssdk_sh debug phy get 6 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/'")
+		ssdk_sh debug phy set 6 0x40010067 $ampl_val
+	fi
+}
+
+function ipq53xx_uniphy_amplitude_set () {
+	#for ipq50xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
+	ssdk_sh debug uniphy set 0 0x7ac 0xb10d 4
+	ssdk_sh debug uniphy set 0 0x24 0 4
+	ssdk_sh debug uniphy set 1 0x7ac 0xb10d 4
+	ssdk_sh debug uniphy set 1 0x24 0 4
+}
+
+ssdk_dependency() {
+	counter=0
+	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
+		insmod qca-ssdk.ko
+	}
+	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
+	do
+		sleep 1
+		counter=$((counter+1))
+	done
+}
+
+start() {
+	ssdk_dependency
+	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
+	#The following commands should be uncommented to enable EDMA WAR
+	if [ "$chip_ver" = "0x1401" ]; then
+		#edma_war_config_add
+		echo ''
+	fi
+	#The following commands should be uncommented to add acl egress stp bypass rules
+	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		#create_acl_byp_egstp_rules $chip_ver
+		echo ''
+	fi
+	#The following commands should be uncommented to enable WAR for ipq50xx
+	chip_type_info=`cat tmp/sysinfo/model`
+	result=$(echo $chip_type_info | grep "IPQ5018")
+	if [ "$result" != "" ]; then
+		#ipq50xx_serdes_monitor &
+		#ipq50xx_uniphy_amplitude_set
+		#ipq50xx_phy_amplitude_set
+		echo ''
+	fi
+	if [ "$chip_ver" = "0x2001" ]; then
+		ipq53xx_uniphy_amplitude_set
+		ipq53xx_phy_amplitude_set
+		echo ''
+	fi
+	echo starting
+}
+
+stop() {
+	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
+	#The following commands should be uncommented to disable EDMA WAR
+	if [ "$chip_ver" = "0x1401" ]; then
+		#edma_war_config_del
+		echo ''
+	fi
+	#The following commands should be uncommented to delete acl egress stp bypass rules
+	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		#delete_acl_byp_egstp_rules $chip_ver
+		echo ''
+	fi
+	echo stoping
+}

feeds/qca-wifi-7/qca-ssdk-qca/files-zyxel_nwa50be/qca-ssdk

@@ -0,0 +1,315 @@
+#!/bin/sh /etc/rc.common
+# Copyright (c) 2018, 2021, The Linux Foundation. All rights reserved.
+# Copyright (c) 2022-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+#
+
+START=16
+
+#!/bin/sh
+ruletype="ip4 ip6"
+side="wan lan"
+qwan="1 3 2 0 5 7 6 4"
+qlan="0 1 2 3 4 5 6 7"
+
+function create_war_acl_rules(){
+	for lw in $side
+	do
+		#echo $lw
+		if [ "$lw" == "wan" ];then
+			listid=254
+			queue=$qwan
+			portmap=0x20
+		else
+			listid=255
+			queue=$qlan
+			portmap=0x1e
+		fi
+		#echo $queue
+		#echo "creating list $listid"
+		ssdk_sh acl list create $listid 255
+		ruleid=0
+		for rt in $ruletype
+		do
+			for qid in $queue
+			do
+				cmd="ssdk_sh acl rule add $listid $ruleid  1 n 0 0"
+				#echo $cmd
+				if [ "$rt" == "ip4" ];then
+					cmd="$cmd ip4 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
+					#echo $cmd
+				else
+					cmd="$cmd ip6 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n"
+					#echo $cmd
+				fi
+				if [ $ruleid -le 3 ];then
+					#non-zero dscp
+					cmd="$cmd y 0x0 0xff"
+				elif [ $ruleid -le 7 ];then
+					#zero dscp
+					cmd="$cmd n"
+				elif [ $ruleid -le 11 ];then
+					#non-zero dscp
+					cmd="$cmd y 0x0 0xff"
+				else
+					#zero dscp
+					cmd="$cmd n"
+				fi
+				p=$((ruleid/2))
+				cmd="$cmd y mask $((ruleid%2)) 0x1 y mask $((p%2)) 0x1 n n n n n n n n n n n n n n n y n n n n n n n y $qid n n 0 0 n n n n n n n n n n n n n n n n n n n n 0"
+				#echo $cmd
+				$cmd
+				ruleid=`expr $ruleid + 1`
+			done
+		done
+		ssdk_sh acl list bind $listid 0 1 $portmap
+	done
+}
+
+function create_war_cosmap(){
+	ssdk_sh cosmap pri2q set 0 0
+	ssdk_sh cosmap pri2q set 1 0
+	ssdk_sh cosmap pri2q set 2 0
+	ssdk_sh cosmap pri2q set 3 0
+	ssdk_sh cosmap pri2q set 4 1
+	ssdk_sh cosmap pri2q set 5 1
+	ssdk_sh cosmap pri2q set 6 1
+	ssdk_sh cosmap pri2q set 7 1
+	ssdk_sh cosmap pri2ehq set 0 0
+	ssdk_sh cosmap pri2ehq set 1 0
+	ssdk_sh cosmap pri2ehq set 2 0
+	ssdk_sh cosmap pri2ehq set 3 0
+	ssdk_sh cosmap pri2ehq set 4 1
+	ssdk_sh cosmap pri2ehq set 5 1
+	ssdk_sh cosmap pri2ehq set 6 1
+	ssdk_sh cosmap pri2ehq set 7 1
+}
+
+function create_acl_byp_egstp_rules(){
+	chip_ver=$1
+	cmd="ssdk_sh servcode config set 1 n 0 0xfffefc7f 0xffbdff 0 0 0 0 0 0"
+	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		cmd="$cmd 0"
+	fi
+	#echo $cmd
+	$cmd
+
+	ssdk_sh acl list create 56 48
+	#action bypass eg stp check
+	action="y n n n n n n n n n n 0 0 n n n n n n n n n n n n n y n n n n n n n n n n n n y n n n n n n n n n n n n n n n n n n"
+	if [ "$chip_ver" == "0x2000" ]; then
+		action="$action n n 0"
+	elif [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		action="$action n n n 0"
+	else
+		action="$action 0"
+	fi
+
+	for ruleid in $( seq 0 2 )
+	do
+		if [ "$ruleid" == "0" ];then
+			cmd="ssdk_sh acl rule add 56 0 1 n 0 0 mac n n n n n y 01-80-c2-00-00-00 ff-ff-ff-ff-ff-ff n n n n n n n n n n n n n n n n n n n n n n n"
+		elif [ "$ruleid" == "1" ];then
+			cmd="ssdk_sh acl rule add 56 1 1 n 0 0 mac n n n n n n n yes 0x8809 0xffff n n n n n n n n n n n n n n n n n n n n n"
+		else
+			cmd="ssdk_sh acl rule add 56 2 1 n 0 0 mac n n n n n n n yes 0x888e 0xffff n n n n n n n n n n n n n n n n n n n n n"
+		fi
+		if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+			cmd="$cmd n $action"
+		else
+			cmd="$cmd $action"
+		fi
+		#echo $cmd
+		$cmd
+	done
+	ssdk_sh acl list bind 56 0 2 1
+}
+
+function delete_war_acl_rules(){
+	for lw in $side
+	do
+		#echo $lw
+		if [ "$lw" == "wan" ];then
+			listid=254
+			queue=$qwan
+			portmap=0x20
+		else
+			listid=255
+			queue=$qlan
+			portmap=0x1e
+		fi
+		ssdk_sh acl list unbind $listid 0 1 $portmap
+		for rt in $ruletype
+		do
+			for qid in $queue
+			do
+				cmd="ssdk_sh acl rule del $listid 0 1"
+				echo $cmd
+				$cmd
+			done
+		done
+		#echo "deleting list $listid"
+		ssdk_sh acl list destroy $listid
+	done
+}
+
+function delete_war_cosmap(){
+	ssdk_sh cosmap pri2q set 0 0
+	ssdk_sh cosmap pri2q set 1 0
+	ssdk_sh cosmap pri2q set 2 1
+	ssdk_sh cosmap pri2q set 3 1
+	ssdk_sh cosmap pri2q set 4 2
+	ssdk_sh cosmap pri2q set 5 2
+	ssdk_sh cosmap pri2q set 6 3
+	ssdk_sh cosmap pri2q set 7 3
+	ssdk_sh cosmap pri2ehq set 0 1
+	ssdk_sh cosmap pri2ehq set 1 0
+	ssdk_sh cosmap pri2ehq set 2 2
+	ssdk_sh cosmap pri2ehq set 3 2
+	ssdk_sh cosmap pri2ehq set 4 3
+	ssdk_sh cosmap pri2ehq set 5 3
+	ssdk_sh cosmap pri2ehq set 6 4
+	ssdk_sh cosmap pri2ehq set 7 5
+}
+
+function delete_acl_byp_egstp_rules(){
+	chip_ver=$1
+	cmd="ssdk_sh servcode config set 1 n 0 0xfffefcff 0xffbfff 0 0 0 0 0 0"
+	if [ "$chip_ver" == "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		cmd="$cmd 0"
+	fi
+	#echo $cmd
+	$cmd
+	ssdk_sh acl list unbind 56 0 2 1
+	ssdk_sh acl rule del 56 0 1
+	ssdk_sh acl rule del 56 1 1
+	ssdk_sh acl rule del 56 2 1
+	ssdk_sh acl list destroy 56
+}
+
+function edma_war_config_add(){
+	create_war_cosmap
+	ssdk_sh acl status set enable
+	create_war_acl_rules
+}
+
+function edma_war_config_del(){
+	delete_war_acl_rules
+	delete_war_cosmap
+}
+
+function ipq50xx_serdes_monitor () {
+	#if qca808x phy exist, need to monitor the serdes to avoid the effect for WIFI
+	port_id=2
+	old_linkstatus="DISABLE"
+	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
+	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
+		ssdk_sh debug phy set 29 0xb 0x300d
+		ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
+
+		while true
+		do
+			cur_linkstatus=`ssdk_sh port linkstatus get $port_id | grep Status | awk -F ':' '{print $2}'`
+			#when qca808x phy link status is from down to up, serdes tx would be enabled
+			if [ "$cur_linkstatus" = "ENABLE" ] && [ "$old_linkstatus" = "DISABLE" ]; then
+				ssdk_sh debug phy set 29 0xb 0xb00d
+				ssdk_sh debug uniphy set 0 0x7ac 0xb00d 4
+			fi
+			#when qca808x phy link status is from up to down, serdes tx would be disabled
+			if [ "$cur_linkstatus" = "DISABLE" ] && [ "$old_linkstatus" = "ENABLE" ]; then
+				ssdk_sh debug phy set 29 0xb 0x300d
+				ssdk_sh debug uniphy set 0 0x7ac 0x300d 4
+			fi
+			old_linkstatus=$cur_linkstatus
+		done
+	fi
+}
+
+function ipq53xx_phy_amplitude_set () {
+	#PHY (8081->5321): Full amplitude (bit[7:5]=000), half swing (bit[4]=1)
+	#for qca808x phy sgmii, set half amplitude with src_half_swing register
+	port_id=2
+	phy_addr=0x1d
+	phy_id_info=`ssdk_sh port phyid get $port_id | grep Org | awk -F '!' '{print $2}'`
+	if [ "$phy_id_info" = "[Org ID]:0x004d[Rev ID]:0xd101" ]; then
+		ssdk_sh debug phy set $phy_addr 0x40010087 0x208a
+		#Set the Reg0x67 bits[7:5]=3’b000 and bit4=1’b1
+		ampl_val=$(ssdk_sh debug phy get $phy_addr 0x40010067 | grep SSDK | grep -oE '0x[0-9a-fA-F]+' | sed 's/\(0x..\)./\11/')
+		ssdk_sh debug phy set $phy_addr 0x40010067 $ampl_val
+	fi
+}
+
+function ipq53xx_uniphy_amplitude_set () {
+        #UniPhy (5321->8081): Custom amplitude (bit[8:4]=21) = 0xb15d
+	#for ipq53xx sgmii, set half amplitude with tx_emp_lvl/margin_index and tx_margin
+	ssdk_sh debug uniphy set 1 0x7ac 0xb15d 4
+	ssdk_sh debug uniphy set 1 0x24 0 4
+}
+
+ssdk_dependency() {
+	counter=0
+	[ -e /lib/modules/$(uname -r)/qca-ssdk.ko ] && [ ! -d /sys/module/qca_ssdk ] && {
+		insmod qca-ssdk.ko
+	}
+	while [ ! -d /sys/ssdk ] && [ "$counter" -le 5 ]
+	do
+		sleep 1
+		counter=$((counter+1))
+	done
+}
+
+start() {
+	ssdk_dependency
+	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
+	#The following commands should be uncommented to enable EDMA WAR
+	if [ "$chip_ver" = "0x1401" ]; then
+		#edma_war_config_add
+		echo ''
+	fi
+	#The following commands should be uncommented to add acl egress stp bypass rules
+	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		#create_acl_byp_egstp_rules $chip_ver
+		echo ''
+	fi
+	#The following commands should be uncommented to enable WAR for ipq50xx
+	chip_type_info=`cat tmp/sysinfo/model`
+	result=$(echo $chip_type_info | grep "IPQ5018")
+	if [ "$result" != "" ]; then
+		#ipq50xx_serdes_monitor &
+		#ipq50xx_uniphy_amplitude_set
+		#ipq50xx_phy_amplitude_set
+		echo ''
+	fi
+	if [ "$chip_ver" = "0x2001" ]; then
+		ipq53xx_uniphy_amplitude_set
+		ipq53xx_phy_amplitude_set
+		echo ''
+	fi
+	echo starting
+}
+
+stop() {
+	chip_ver=`ssdk_sh debug reg get 0 4 | grep Data | tr -d 'SSDK Init OK![Data]:'`
+	#The following commands should be uncommented to disable EDMA WAR
+	if [ "$chip_ver" = "0x1401" ]; then
+		#edma_war_config_del
+		echo ''
+	fi
+	#The following commands should be uncommented to delete acl egress stp bypass rules
+	if [ "$chip_ver" = "0x1500" ] || [ "$chip_ver" = "0x1501" ] || [ "$chip_ver" = "0x2000" ] || [ "$chip_ver" = "0x2001" ] || [ "$chip_ver" = "0x2100" ]; then
+		#delete_acl_byp_egstp_rules $chip_ver
+		echo ''
+	fi
+	echo stoping
+}

feeds/qca-wifi-7/qca-ssdk-qca/patches-zyxel_nwa50be/0001-pinctrl-make-the-switch-LED-works.patch

@@ -0,0 +1,47 @@
+From 7fa9e9b683f1c573c58a14755347988919bc7d06 Mon Sep 17 00:00:00 2001
+From: YenLin Pan <yenlin.pan@zyxel.com.tw>
+Date: Wed, 14 May 2025 13:47:06 +0800
+Subject: [PATCH] pinctrl: make the switch LED works
+
+Enable switch LED pin definition for LED0/LED1/LED2 control
+
+Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>
+---
+ src/init/ssdk_mht_pinctrl.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/src/init/ssdk_mht_pinctrl.c b/src/init/ssdk_mht_pinctrl.c
+index 2debe59..1ae0002 100755
+--- a/src/init/ssdk_mht_pinctrl.c
++++ b/src/init/ssdk_mht_pinctrl.c
+@@ -33,11 +33,17 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
+     /*PINs default MUX Setting*/
+     MHT_PIN_SETTING_MUX(0,  MHT_PIN_FUNC_INTN_WOL),
+     MHT_PIN_SETTING_MUX(1,  MHT_PIN_FUNC_INTN),
+-#if 0
++#if 1
+     MHT_PIN_SETTING_MUX(2,  MHT_PIN_FUNC_P0_LED_0),
+     MHT_PIN_SETTING_MUX(3,  MHT_PIN_FUNC_P1_LED_0),
+     MHT_PIN_SETTING_MUX(4,  MHT_PIN_FUNC_P2_LED_0),
+     MHT_PIN_SETTING_MUX(5,  MHT_PIN_FUNC_P3_LED_0),
++    MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_P0_LED_2),
++    MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_P1_LED_2),
++    MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_P2_LED_2),
++    MHT_PIN_SETTING_MUX(9,  MHT_PIN_FUNC_P3_LED_2),
++#endif
++#if 0
+     MHT_PIN_SETTING_MUX(6,  MHT_PIN_FUNC_PPS_IN),
+     MHT_PIN_SETTING_MUX(7,  MHT_PIN_FUNC_TOD_IN),
+     MHT_PIN_SETTING_MUX(8,  MHT_PIN_FUNC_RTC_REFCLK_IN),
+@@ -49,7 +55,7 @@ static struct mht_pinctrl_setting mht_pin_settings[] = {
+     MHT_PIN_SETTING_MUX(13, MHT_PIN_FUNC_P0_TOD_OUT),
+     MHT_PIN_SETTING_MUX(14, MHT_PIN_FUNC_P0_CLK125_TDI),
+     MHT_PIN_SETTING_MUX(15, MHT_PIN_FUNC_P0_SYNC_CLKO_PTP),
+-#if 0
++#if 1
+     MHT_PIN_SETTING_MUX(16, MHT_PIN_FUNC_P0_LED_1),
+     MHT_PIN_SETTING_MUX(17, MHT_PIN_FUNC_P1_LED_1),
+     MHT_PIN_SETTING_MUX(18, MHT_PIN_FUNC_P2_LED_1),
+-- 
+2.34.1
+

feeds/tip/certificates/files/etc/init.d/early_boot

@@ -20,6 +20,7 @@ copy_certificates() {
 	[ -z "$country" ] && country=US
 	echo "options cfg80211 ieee80211_regdom="$country > /etc/modules.conf 
 	echo -n $country > /etc/ucentral/country
+	sync
 	exit 0
 }
 

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -6,13 +6,16 @@ check_certificates() {
 
 check_certificates
 
-bootconfig_lookup() {
-	case "$(fw_printenv -n cert_part)" in
-	0)	echo "0:BOOTCONFIG"
-		;;
-	1)	echo "0:BOOTCONFIG1"
-		;;
-	esac
+tar_part_lookup() {
+	part="$(fw_printenv -n cert_part)"
+	if [ "$part" -eq 0 ]; then
+		echo "$2"
+		part=1
+	else
+		echo "$1"
+		part=0
+	fi
+	fw_setenv cert_part $part
 }
 
 . /lib/functions.sh
@@ -35,13 +38,40 @@ sonicfi,rap7*)
 		[ -n "$mtd" ] && mount -t ext4 /dev/mtdblock$mtd /certificates
 	fi
 	if [ ! -f /certificates/cert.pem ] || [ ! -f /certificates/key.pem ]; then
-		bootconfig=$(bootconfig_lookup)
-		if [ -n "$bootconfig" ]; then
-			mmc_dev=$(echo $(find_mmc_part "$bootconfig") | sed 's/^.\{5\}//')
+		part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
+		if [ -n "part" ]; then
+			mmc_dev=$(echo $(find_mmc_part "$part") | sed 's/^.\{5\}//')
 			[ -n "$mmc_dev" ] && tar xf /dev/$mmc_dev -C /certificates
 		fi
 	fi
 	;;
+udaya,a5-id2|\
+yuncore,ax820)
+	mtd=$(find_mtd_index certificates)
+	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
+		mount -t squashfs /dev/mtdblock$mtd /mnt
+		cp /mnt/* /certificates
+		umount /mnt
+	fi
+	part=$(tar_part_lookup "insta1" "insta2")
+	if [ -n "insta" ]; then
+		mtd=$(find_mtd_index $part)
+		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
+	fi
+	;;
+sonicfi,rap6*)
+	mtd=$(find_mtd_index certificates)
+	if [ "$(head -c 4 /dev/mtd$mtd)" == "hsqs" ]; then
+		mount -t squashfs /dev/mtdblock$mtd /mnt
+		cp /mnt/* /certificates
+		umount /mnt
+	fi
+	part=$(tar_part_lookup "devinfo" "certificates")
+	if [ -n "$part" ]; then
+		mtd=$(find_mtd_index $part)
+		[ -n "$mtd" ] && tar xf /dev/mtdblock$mtd -C /certificates
+	fi
+	;;
 *)
 	mtd=$(find_mtd_index certificates)
 

feeds/tip/certificates/files/usr/bin/store_certs

@@ -1,25 +1,44 @@
 #!/bin/sh
 
-bootconfig_lookup() {
-	bootconfig="$(fw_printenv -n cert_part)"
-	case "$(fw_printenv -n cert_part)" in
-	0)	echo "0:BOOTCONFIG1"
-		bootconfig=1
-		;;
-	*)	echo "0:BOOTCONFIG"
-		bootconfig=0
-		;;
-	esac
-	fw_setenv cert_part $bootconfig
+tar_part_lookup() {
+	part="$(fw_printenv -n cert_part)"
+	if [ "$part" -eq 0 ]; then
+		echo "$2"
+		part=1
+	else
+		echo "$1"
+		part=0
+	fi
+	fw_setenv cert_part $part
 }
 
 . /lib/functions.sh
 case "$(board_name)" in
 sonicfi,rap7110c-341x)
 	cd /certificates
-	tar cf /tmp/certs.tar
-	bootconfig=$(bootconfig_lookup)
-	mmc_dev=$(echo $(find_mmc_part $bootconfig) | sed 's/^.\{5\}//')
-	dd if=/tmp/certs.tar of=/dev/$bootconfig
+	tar cf /tmp/certs.tar .
+	part=$(tar_part_lookup "0:BOOTCONFIG" "0:BOOTCONFIG1")
+	mmc_dev=$(echo $(find_mmc_part $part) | sed 's/^.\{5\}//')
+	dd if=/tmp/certs.tar of=/dev/$mmc_dev
+	;;
+udaya,a5-id2|\
+yuncore,ax820)
+	cd /certificates
+	tar cf /tmp/certs.tar .
+	part=$(tar_part_lookup "insta1" "insta2")
+	mtd=$(find_mtd_index $part)
+	dd if=/tmp/certs.tar of=/dev/mtdblock$mtd
+	;;
+sonicfi,rap6*)
+	if [ "$(fw_printenv -n store_certs_disabled)" != "1" ]; then
+		cd /certificates
+		tar cf /tmp/certs.tar .
+		part=$(tar_part_lookup "devinfo" "certificates")
+		mtd=$(find_mtd_index $part)
+		block_size=$(cat /sys/class/mtd/mtd$mtd/size)
+		dd if=/tmp/certs.tar of=/tmp/certs_pad.tar bs=$block_size conv=sync
+		mtd write /tmp/certs_pad.tar /dev/mtd$mtd
+		rm -f /tmp/certs.tar /tmp/certs_pad.tar
+	fi
 	;;
 esac

feeds/tip/cloud_discovery/files/etc/init.d/cloud_discover

@@ -22,6 +22,19 @@ start_service() {
 	[ "$valid" == "true" ] || 
 		/usr/share/ucentral/ucentral.uc /etc/ucentral/ucentral.cfg.0000000001 > /dev/null
 
+	est_client check
+	[ $? -eq 1 ] && {
+		logger ERROR
+		logger ERROR
+		logger ERROR
+		logger The certificate used has a CN that does not match the serial of the device
+		echo The certificate used has a CN that does not match the serial of the device
+		logger ERROR
+		logger ERROR
+		logger ERROR
+		return
+	}
+
 	procd_open_instance
 	procd_set_param command "$PROG"
 	procd_set_param respawn

feeds/tip/cloud_discovery/files/usr/bin/cloud_discovery

@@ -15,9 +15,15 @@ const ONLINE = 2;
 const OFFLINE = 3;
 const ORPHAN = 4;
 
+const DISCOVER_DHCP = "DHCP";
+const DISCOVER_FLASH = "FLASH";
+const DISCOVER_LOOKUP = "OpenLAN";
+
 let ubus = libubus.connect();
 let uci = libuci.cursor();
 let state = DISCOVER;
+let discovery_method = "";
+let discovery_block_list = [];
 let validate_time;
 let offline_time;
 let orphan_time;
@@ -27,6 +33,8 @@ let timeouts = {
 	'validate': 120,
 	'orphan': 2 * 60 * 60,
 	interval: 10000,
+	expiry_interval: 60 * 60 * 1000,
+	expiry_threshold: 1 * 365 * 24 * 60 * 60,
 };
 
 ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "cloud_discover");
@@ -35,6 +43,24 @@ ulog(LOG_INFO, 'Start\n');
 
 uloop.init();
 
+let cds_server = 'discovery.open-lan.org';
+
+function detect_certificate_type() {
+	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
+	let issuer = pipe.read("all");
+	pipe.close();
+
+	if (match(issuer, /OpenLAN Demo Birth CA/)) {
+		ulog(LOG_INFO, 'Certificate type is "Demo" \n');
+		cds_server = 'discovery-qa.open-lan.org';
+		timeouts.expiry_threshold = 3 * 24 * 60 * 60;
+	} else if (match(issuer, /OpenLAN Birth Issuing CA/)) {
+		ulog(LOG_INFO, 'Certificate type is "Production"\n');
+	} else {
+		ulog(LOG_INFO, 'Certificate type is "TIP"\n');
+	}
+}
+
 function readjsonfile(path) {
 	let file = fs.readfile(path);
 	if (file)
@@ -76,6 +102,17 @@ function gateway_load() {
 	return readjsonfile('/etc/ucentral/gateway.json');
 }
 
+function discovery_state_write() {
+	if (length(discovery_method) == 0)
+		return;
+
+	let discovery_state = {
+		"type": discovery_method,
+		"updated": time()
+	};
+	fs.writefile('/etc/ucentral/discovery.state.json', discovery_state);
+}
+
 function gateway_write(data) {
 	let gateway = gateway_load();
 	gateway ??= {};
@@ -89,8 +126,10 @@ function gateway_write(data) {
 		if (new[key] != gateway[key])
 			changed = true;
 	}
-	if (changed)
+	if (changed) {
 		fs.writefile('/etc/ucentral/gateway.json', new);
+		system('sync');
+	}
 	return changed;
 }
 
@@ -120,6 +159,7 @@ function set_state(set) {
 		ulog(LOG_INFO, 'Wait for validation\n');
 		validate_time = time();
 		state = VALIDATING;
+		push(discovery_block_list, discovery_method);
 		break;
 
 	case ONLINE:
@@ -127,6 +167,8 @@ function set_state(set) {
 		if (prev == VALIDATING) {
 			ulog(LOG_INFO, 'Setting cloud controller to validated\n');
 			gateway_write({ valid: true });
+			discovery_state_write();
+			discovery_block_list = [];
 		}
 		break;
 
@@ -161,7 +203,7 @@ function redirector_lookup() {
 	let serial = uci.get('system', '@system[-1]', 'mac');
 
 	fs.unlink(path);
-	system(`curl -k --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/operational.ca https://openlan.keys.tip.build/v1/devices/${serial} --output /tmp/ucentral.redirector`);
+	system(`curl -k --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/operational.ca https://${cds_server}/v1/devices/${serial} --output /tmp/ucentral.redirector`);
 	if (!fs.stat(path))
 		return;
 	let redir = readjsonfile(path);
@@ -195,6 +237,13 @@ function time_is_valid() {
 	return valid;
 }
 
+function is_discover_method_blacked() {
+	if (discovery_method in discovery_block_list)
+		return true;
+
+	return false;
+}
+
 function interval_handler() {
 	printf(`State ${state}\n`);
 	switch(state) {
@@ -224,16 +273,21 @@ function interval_handler() {
 		if (!time_is_valid())
 			return;
 
-		if (discover_dhcp())
-			return;
-
 		if (system('/usr/bin/est_client enroll'))
 			return;
 
-		if (!discover_flash())
+		discovery_method = DISCOVER_DHCP;
+		if (!is_discover_method_blacked() && discover_dhcp())
 			return;
 
+		discovery_method = DISCOVER_FLASH;
+		if (!is_discover_method_blacked() && !discover_flash())
+			return;
+
+		discovery_method = DISCOVER_LOOKUP;
 		redirector_lookup();
+
+		discovery_block_list = [];
 		break;
 
 	case VALIDATING:
@@ -252,6 +306,36 @@ function interval_handler() {
 	}
 }
 
+function trigger_reenroll() {
+	ulog(LOG_INFO, 'triggering reenroll\n');
+
+	if (system('/usr/bin/est_client reenroll')) {
+		ulog(LOG_INFO, 'reenroll failed\n');
+		return;
+	}
+	
+	ulog(LOG_INFO, 'reenroll succeeded\n');
+	ulog(LOG_INFO, 'stopping client\n');
+	
+	system('/etc/init.d/ucentral stop');
+	set_state(DISCOVER);
+}
+
+function expiry_handler() {
+	let stat = fs.stat('/etc/ucentral/operational.ca');
+	if (!stat)
+		return;
+
+	let ret = system(`openssl x509 -checkend ${timeouts.expiry_threshold} -noout -in /certificates/operational.pem`);
+	if (!ret) {
+		ulog(LOG_INFO, 'checked certificate expiry - all ok\n');
+		return;
+	}
+
+	ulog(LOG_INFO, 'certificate will expire soon\n');
+	trigger_reenroll();
+}
+
 let ubus_methods = {
 	discover: {
 		call: function(req) {
@@ -326,8 +410,17 @@ let ubus_methods = {
 		},
 		args: {},
 	},
+	reenroll: {
+		call: function(req) {
+			trigger_reenroll();
+			return 0;
+		},
+		args: {},
+	},
 };
 
+detect_certificate_type();
+
 if (gateway_available()) {
 	let status = ubus.call('ucentral', 'status');
 	ulog(LOG_INFO, 'cloud is known\n');
@@ -344,6 +437,7 @@ if (gateway_available()) {
 timeouts_load();
 
 interval = uloop.interval(timeouts.interval, interval_handler);
+uloop.interval(timeouts.expiry_interval, expiry_handler);
 
 ubus.publish('cloud', ubus_methods);
 

feeds/tip/cloud_discovery/files/usr/bin/est_client

@@ -4,12 +4,28 @@
 
 import { ulog_open, ulog, ULOG_SYSLOG, ULOG_STDIO, LOG_DAEMON, LOG_INFO } from 'log';
 import * as fs from 'fs';
+import * as libuci from 'uci';
 
 let store_operational_pem = false;
 let store_operational_ca = false;
-let est_server = 'qaest.certificates.open-lan.org:8001';
+let est_server = 'est.certificates.open-lan.org';
 let cert_prefix = 'operational';
 
+function set_est_server() {
+	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
+	let issuer = pipe.read("all");
+	pipe.close();
+
+	if (match(issuer, /OpenLAN Demo Birth CA/)) {
+		ulog(LOG_INFO, 'Certificate type is "Demo" \n');
+		est_server = 'qaest.certificates.open-lan.org:8001';
+	} else if (match(issuer, /OpenLAN Birth Issuing CA/)) {
+		ulog(LOG_INFO, 'Certificate type is "Production"\n');
+	} else {
+		ulog(LOG_INFO, 'Certificate type is "TIP"\n');
+	}
+}
+
 if (getenv('EST_SERVER'))
 	est_server = getenv('EST_SERVER');
 
@@ -78,6 +94,8 @@ function call_est_server(path, cert, target) {
 	if (generate_csr(cert))
 		return 1;
 
+	set_est_server();	
+
 	let ret = system('curl -m 10 -X POST https://' + est_server + '/.well-known/est/' + path + ' -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert ' + cert + ' --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
 	if (ret) {
 		ulog(LOG_INFO, 'Failed to request operational certificate\n');
@@ -125,6 +143,9 @@ function load_operational_ca() {
 		ulog(LOG_INFO, 'Operational CA is present\n');
 		return 0;
 	}
+
+	set_est_server();	
+
 	let ret = system('curl -m 10 -X GET https://' + est_server + '/.well-known/est/cacerts --cert /etc/ucentral/' + cert_prefix + '.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/' + cert_prefix + '.ca.nohdr.p7');
 	if (!ret)
 		ret = p7_too_pem('/tmp/' + cert_prefix + '.ca.nohdr.p7', '/etc/ucentral/' + cert_prefix + '.ca');
@@ -139,11 +160,14 @@ function load_operational_ca() {
 }
 
 function fwtool() {
+	if (!fs.stat('/etc/ucentral/cert.pem'))
+		return 0;
+
 	let pipe = fs.popen(`openssl x509 -in /etc/ucentral/cert.pem -noout -issuer`);
 	let issuer = pipe.read("all");
 	pipe.close();
 
-	if (!(match(issuer, /OpenLAN/) && match(issuer, /Birth CA/)))
+	if (!(match(issuer, /OpenLAN/) && match(issuer, /Birth/)))
 		return 0;
 
 	ulog(LOG_INFO, 'The issuer is insta\n');
@@ -163,6 +187,20 @@ function fwtool() {
 	return 0;
 }
 
+function check_cert() {
+	if (!fs.stat('/etc/ucentral/cert.pem'))
+		return 0;
+	let pipe = fs.popen("openssl x509 -in /etc/ucentral/cert.pem  -noout -subject -nameopt multiline | grep commonName | awk '{ print $3 }'");
+	let cn = pipe.read("all");
+	pipe.close();
+	if (!cn)
+		return 0;
+	cn = lc(trim(cn));
+	let uci = libuci.cursor();
+	let serial = uci.get('ucentral', 'config', 'serial');
+	return cn != serial;
+}
+
 switch(ARGV[0]) {
 case 'enroll':
 	let ret = simpleenroll();
@@ -184,4 +222,7 @@ case 'reenroll':
 
 case 'fwtool':
 	exit(fwtool());
+
+case 'check':
+	exit(check_cert());
 }

feeds/tip/cloud_discovery/files/usr/share/ucentral/cloud_discovery.uc

@@ -5,7 +5,7 @@ import * as fs from 'fs';
 
 let cmd = ARGV[0];
 let ifname = getenv("interface");
-let opt224 = getenv("opt138");
+let opt138 = getenv("opt138");
 let opt224 = getenv("opt224");
 
 if (cmd != 'bound' && cmd != 'renew')

feeds/tip/tip-defaults/files/etc/ucentral/insta.pem

@@ -4,3 +4,6 @@ MIIFajCCA1KgAwIBAgICDnowDQYJKoZIhvcNAQELBQAwHzEdMBsGA1UEAwwUT3BlbkxBTiBEZW1vIFJv
 -----BEGIN CERTIFICATE-----
 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
 -----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----
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
+-----END CERTIFICATE-----

feeds/ucentral/ratelimit/files/usr/bin/ratelimit

@@ -350,7 +350,7 @@ function run_service() {
 				printf('-> reload\n');
 				let list = uctx.list();
 				for (let obj in list) {
-					if (!wildcard(obj, 'hostapd.wlan*'))
+					if (!wildcard(obj, 'hostapd.wlan*') && !wildcard(obj, 'hostapd.phy*'))
 						continue;
 					let iface = split(obj, '.')[1];
 					let device = get_device(devices, req.args.device);

feeds/ucentral/rrmd/files/etc/init.d/rrmd

@@ -6,6 +6,8 @@ STOP=01
 USE_PROCD=1
 
 start_service() {
+	[ -e "/tmp/rrm_timestamp" ] && rm -rf /tmp/rrm_timestamp
+	[ -e "/tmp/rrm_chan_switch" ] && rm -rf /tmp/rrm_chan_switch
 	rm -rf /tmp/threshold_breach_count*
 	rm -rf /tmp/fixed_channel*
 	rm -rf /tmp/chanutil_phy*

feeds/ucentral/rrmd/files/usr/share/rrmd/policy_chanutil.uc

@@ -24,6 +24,10 @@ function stats_info_write(path, value) {
 	file.close();
 }
 
+function record_rrm_timestamp() {
+    stats_info_write("/tmp/rrm_timestamp", time());
+}
+
 // total number of radios: default=2
 let num_radios = 2;
 let phy_count;
@@ -136,20 +140,122 @@ function channel_to_freq(band, channel) {
     return freq;
 }
 
-function center_freq_calc(band, freq, bandwidth) {
-    if (bandwidth == 40)
-        return +freq + 10;
-    if (bandwidth == 80)
-        return +freq + 30;
-    if (bandwidth == 160)
-        return +freq + 70;
-    if (bandwidth == 320)
-        if (freq == 6115)
-            return +freq - 10;
-        else
-            return +freq + 150;
+// using mapping to get correct center channel, especially for 6G radio
+function get_center_channel(channel, band, bw) {
+    let center_channel = channel;
+    let center_channel_map = {};
 
-    return +freq;
+    switch (band) {
+    case '5g':
+        if (bw == 40) {
+            center_channel_map = {
+                "36": 38, "40": 38,
+                "44": 46, "48": 46,
+                "52": 54, "56": 54,
+                "60": 62, "64": 62,
+                "100": 102, "104": 102,
+                "108": 110, "112": 110,
+                "116": 118, "120": 118,
+                "124": 126, "128": 126,
+                "132": 134, "136": 134,
+                "140": 142, "144": 142,
+                "149": 151, "153": 151,
+                "157": 159, "161": 159,
+                "165": 167
+            };
+        } else if (bw == 80) {
+            center_channel_map = {
+                "36": 42, "40": 42, "44": 42, "48": 42,
+                "52": 58, "56": 58, "60": 58, "64": 58,
+                "100": 106, "104": 106, "108": 106, "112": 106,
+                "116": 122, "120": 122, "124": 122, "128": 122,
+                "132": 138, "136": 138, "140": 138, "144": 138,
+                "149": 155, "153": 155, "157": 155, "161": 155,
+                "165": 171
+            };
+        } else if (bw == 160) {
+            center_channel_map = {
+                "36": 50, "40": 50, "44": 50, "48": 50,
+                "52": 50, "56": 50, "60": 50, "64": 50,
+                "100": 114, "104": 114, "108": 114, "112": 114,
+                "116": 114, "120": 114, "124": 114, "128": 114
+            };
+        }
+        break;
+    case '6g':
+        if (bw == 40) {
+            center_channel_map = {
+                "1": 3, "5": 3, "9": 11, "13": 11,
+                "17": 19, "21": 19, "25": 27, "29": 27,
+                "33": 35, "37": 35, "41": 43, "45": 43,
+                "49": 51, "53": 51, "57": 59, "61": 59,
+                "65": 67, "69": 67, "73": 75, "77": 75,
+                "81": 83, "85": 83, "89": 91, "93": 91,
+                "97": 99, "101": 99, "105": 107, "109": 107,
+                "113": 115, "117": 115, "121": 123, "125": 123,
+                "129": 131, "133": 131, "137": 139, "141": 139,
+                "145": 147, "149": 147, "153": 155, "157": 155,
+                "161": 163, "165": 163, "169": 171, "173": 171,
+                "177": 179, "181": 179, "185": 187, "189": 187,
+                "193": 195, "197": 195, "201": 203, "205": 203,
+                "209": 211, "213": 211, "217": 219, "221": 219,
+                "225": 227
+            };
+        } else if (bw == 80) {
+            center_channel_map = {
+                "1": 7, "5": 7, "9": 7, "13": 7,
+                "17": 23, "21": 23, "25": 23, "29": 23,
+                "33": 39, "37": 39, "41": 39, "45": 39,
+                "49": 55, "53": 55, "57": 55, "61": 55,
+                "65": 71, "69": 71, "73": 71, "77": 71,
+                "81": 87, "85": 87, "89": 87, "93": 87,
+                "97": 103, "101": 103, "105": 103, "109": 103,
+                "113": 119, "117": 119, "121": 119, "125": 119,
+                "129": 135, "133": 135, "137": 135, "141": 135,
+                "145": 151, "149": 151, "153": 151, "157": 151,
+                "161": 167, "165": 167, "169": 167, "173": 167,
+                "177": 183, "181": 183, "185": 183, "189": 183,
+                "193": 199, "197": 199, "201": 199, "205": 199,
+                "209": 215
+            };
+        } else if (bw == 160) {
+            center_channel_map = {
+                "1": 15, "5": 15, "9": 15, "13": 15,
+                "17": 15, "21": 15, "25": 15, "29": 15,
+                "33": 47, "37": 47, "41": 47, "45": 47,
+                "49": 47, "53": 47, "57": 47, "61": 47,
+                "65": 79, "69": 79, "73": 79, "77": 79,
+                "81": 79, "85": 79, "89": 79, "93": 79,
+                "97": 111, "101": 111, "105": 111, "109": 111,
+                "113": 111, "117": 111, "121": 111, "125": 111,
+                "129": 143, "133": 143, "137": 143, "141": 143,
+                "145": 143, "149": 143, "153": 143, "157": 143,
+                "161": 175, "165": 175, "169": 175, "173": 175,
+                "177": 175, "181": 175, "185": 175, "189": 175,
+                "193": 207
+            };
+        } else if (bw == 320) {
+            center_channel_map = {
+                "1": 31, "5": 31, "9": 31, "13": 31,
+                "17": 31, "21": 31, "25": 31, "29": 31,
+                "33": 63, "37": 63, "41": 63, "45": 63,
+                "49": 63, "53": 63, "57": 63, "61": 63,
+                "65": 63, "69": 63, "73": 63, "77": 63,
+                "81": 63, "85": 63, "89": 63, "93": 63,
+                "97": 127, "101": 127, "105": 127, "109": 127,
+                "113": 127, "117": 127, "121": 127, "125": 127,
+                "129": 127, "133": 127, "137": 127, "141": 127,
+                "145": 127, "149": 127, "153": 127, "157": 127,
+                "161": 191
+            };
+        }
+        break;
+    }
+
+    if (center_channel_map[channel])
+        center_channel = center_channel_map[channel];
+
+    return center_channel;
 }
 
 function interface_status_check(iface) {
@@ -201,6 +307,9 @@ function check_current_channel(iface) {
 function hostapd_switch_channel(msg) {
     ulog_info(`[%s] Start switch channel to %d \n`, msg.iface, msg.channel);
 
+    // Channel switch in progress, set flag = 1
+    stats_info_write("/tmp/rrm_chan_switch", 1);
+
     let chan_switch_status = 0;
     let sec_channel_offset = null;
 
@@ -208,7 +317,8 @@ function hostapd_switch_channel(msg) {
     let bandwidth = replace(msg.htmode, /[^0-9]/g, '');
 
     let target_freq = channel_to_freq(msg.band, msg.channel);
-    let center_freq = center_freq_calc(msg.band, target_freq, bandwidth);
+    let center_channel = get_center_channel(msg.channel, msg.band, bandwidth);
+    let center_freq = channel_to_freq(msg.band, center_channel);
     if (bandwidth > 20)
         sec_channel_offset = 1;
 
@@ -245,9 +355,20 @@ function switch_status_check(iface, dfs_enabled_5g_flag) {
         ulog_info(`[%s] 5G radio might need some time to be UP (DFS enabled) \n`, iface);
 
         let p = 0;
-        // Max 65 seconds wait for the DFS enabled interface to be UP
+        // Default max 70 seconds wait for the DFS enabled interface to be UP
         let timer = 70;
 
+        // get real timer from hostapd_cli command
+        let check_cac_time = sprintf('hostapd_cli -i %s status | grep \"cac_time_left_seconds\" | awk -F "=" \'{print $2}\'', iface);
+        let _cac_time = fs.popen(check_cac_time);
+        let cac_time = trim(_cac_time.read('all'));
+        _cac_time.close();
+
+        // if cac_time is a valid number, set timer to cac_time + 5 seconds
+        if (cac_time > 0 && match(cac_time, /^[0-9]+$/)) {
+            timer = int(cac_time) + 5;
+        }
+
         while (p < timer) {
             ulog_info(`[%s] Check#%d \n `, iface, p);
 
@@ -267,6 +388,9 @@ function switch_status_check(iface, dfs_enabled_5g_flag) {
         }
     }
 
+    // Channel switch done, set flag = 0
+    stats_info_write("/tmp/rrm_chan_switch", 0);
+
     let current_chan = check_current_channel(iface);
     return current_chan;
 }
@@ -436,7 +560,7 @@ function random_channel_selection(iface, band, htmode, chan_list_valid) {
     ulog_info(`[%s] Selected channel list from config (default channel list shall be used in case channels haven't been selected) = %s \n`, iface, (chan_list_valid || '[]'));
 
     if (band == '2g' && bw >= 40) {
-        ulog_info(`[%s] It is highly recommended to NOT use %dMHz bandwidth for 2.4G radio \n`, iface, bw);
+        ulog_info(`[%s] It is highly recommended to NOT use %dMHz bandwidth for 2.4G radio (RRM will not work properly) \n`, iface, bw);
     } else if (band == '5g' && bw > 160) {
         ulog_info(`[%s] %dMHz bandwidth not supported for 5G radio. Please use a bandwidth of 160MHz or lower\n`, iface, bw);
     }
@@ -568,9 +692,28 @@ function random_channel_selection(iface, band, htmode, chan_list_valid) {
     return random_channel;
 }
 
+function check_center_channel(chosen_random_channel, current_channel, band, htmode) {
+    let ret = false;
+    let bw = replace(htmode, /[^0-9]/g, '');
+
+    if (band != '2g' || bw != 20) {
+        // for 2G band or 20MHz bandwidth, center channel is the same as the channel
+        let chosen_random_channel_center = get_center_channel(chosen_random_channel, band, bw);
+        let current_channel_center = get_center_channel(current_channel, band, bw);
+
+        ulog_info(`Center channel of the chosen random channel (%d) = %d; Center channel of the current channel (%d) = %d \n`, chosen_random_channel, chosen_random_channel_center, current_channel, current_channel_center);
+
+        if (chosen_random_channel_center == current_channel_center)
+            ret = true;
+    }
+
+    return ret;
+}
+
 function algo_rcs(iface, current_channel, band, htmode, selected_channels) {
     let chosen_random_channel = 0;
     let res = 0;
+    let same_center_channel = false;
 
     // random_channel_selection script will help to select random channel
     chosen_random_channel = random_channel_selection(iface, band, htmode, selected_channels);
@@ -580,8 +723,15 @@ function algo_rcs(iface, current_channel, band, htmode, selected_channels) {
         ulog_info(`[%s] RCS assigned the same channel = %d; Skip channel switch \n`, iface, chosen_random_channel);
         res = 0;
     } else if (chosen_random_channel > 0) {
-        ulog_info(`[%s] RCS done ... random channel found = %d\n`, iface, chosen_random_channel);
-        res = 1;
+        // check if the random channel has the same center channel as the current channel
+        same_center_channel = check_center_channel(chosen_random_channel, current_channel, band, htmode);
+        if (same_center_channel) {
+            ulog_info(`[%s] RCS found channel %d with the same center channel as current channel %d; Skip channel switch \n`, iface, chosen_random_channel, current_channel);
+            res = 0;
+        } else {
+            ulog_info(`[%s] RCS done ... random channel found = %d\n`, iface, chosen_random_channel);
+            res = 1;
+        }
     } else {
         ulog_info(`[%s] RCS scan FAIL. Retry Channel optimization at next cycle \n`, iface);
         res = 0;
@@ -611,6 +761,8 @@ function channel_optimize() {
         return config.interval;
     }
 
+    record_rrm_timestamp();
+
     let current_rf_down = {};
 	let cool_down_f = {};
     let check_all_cool_down = 0;
@@ -924,7 +1076,7 @@ function channel_optimize() {
                             }
                         } else {
                             // revert back to the original channel
-                            ulog_info(`[%s] Channel %d has a cac_time longer than 60 seconds, RRM failed for this interval (you might want to avoid selecting this channel) \n`, radio_iface[l], init_payload.channel);
+                            ulog_info(`[%s] Channel %d may have a cac_time longer than 60 seconds, RRM failed for this interval (you might want to avoid selecting this channel) \n`, radio_iface[l], init_payload.channel);
                         }
                     } else if (selected_algo == "ACS") {
                         let random_wait_time = random_time_calc();
@@ -940,6 +1092,9 @@ function channel_optimize() {
                             check_all_threshold_breach >= 1: threshold breach count exceeded for one or more interfaces
                         */
 
+                        // Channel switch in progress, set flag = 1
+                        stats_info_write("/tmp/rrm_chan_switch", 1);
+
                         // flag to check if 5G radio was restarted
                         let radio_5g_restarted = 0;
 
@@ -1003,6 +1158,10 @@ function channel_optimize() {
                             sleep(30000);
                         }
                     }
+
+                    sleep(5000);
+                    // Channel switch done, set flag = 0
+                    stats_info_write("/tmp/rrm_chan_switch", 0);
                 } else {
                     if (threshold_breach_f[l] != 1) {
                         ulog_info(`[%s] Threshold breach count (=%d) < Allowed consecutive Channel Utilization threshold breach count (=%d), will be checked again in the next interval \n`, radio_iface[l], threshold_breach_count[l], config.consecutive_threshold_breach);
@@ -1016,6 +1175,7 @@ function channel_optimize() {
         }
     }
     ulog_info(`RRM with channel optimization finished; next RRM round starts in %d seconds \n`, config.interval/1000);
+    record_rrm_timestamp();
 
     return config.interval;
 }

feeds/ucentral/rtty/files/rtty.init

@@ -51,7 +51,7 @@ start_rtty() {
 	procd_set_param command $BIN -h $host -I "$id" -a
 	[ -n "$port" ] && procd_append_param command -p "$port"
 	[ -n "$description" ] && procd_append_param command -d "$description"
-	[ "$ssl" = "1" ] && procd_append_param command -s -c /etc/ucentral/cert.pem -k /etc/ucentral/key.pem
+	[ "$ssl" = "1" ] && procd_append_param command -s -c /etc/ucentral/operational.pem -k /etc/ucentral/key.pem
 	[ -n "$token" ] && procd_append_param command -t "$token"
 	[ "$verbose" = "1" ] && procd_append_param command -v
 	[ "$timeout" -eq "0" ] || procd_append_param command -e $timeout

feeds/ucentral/ucentral-client/Makefile

@@ -4,10 +4,9 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=2e28e0aa61b74851c7daf3634ec34d303a603e881e6c5d1fd76c837dea527582
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-07-08
-PKG_SOURCE_VERSION:=69829f63ea172ce9bd19b7b02073746fe9cf6a52
+PKG_SOURCE_DATE:=2025-08-11
+PKG_SOURCE_VERSION:=549e84e5fea7230c5471d6a3dbddcc7d3152f665
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>

feeds/ucentral/ucentral-client/files/etc/config/ucentral

@@ -6,9 +6,9 @@ config ucentral config
 	option reporting	10
 
 config timeouts timeouts
-	option offline		120
+	option offline		14400
 	option validate		120
-	option orphan		120
+	option orphan		7200
 
 #config event
 #	option type  dhcp

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=1ad9f7b5d5d1145e3aed14937eef60d6794d821e0244cc8fa824400d3da47f5a
+PKG_MIRROR_HASH:=dd37ce95e77af90424d4792f1d292e90242d66ebf5c6552afdf364fd33c58af8
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-07-11
-PKG_SOURCE_VERSION:=5276d0b8b6e83ab57354b0bcbb820de83a91ab88
+PKG_SOURCE_DATE:=2025-08-12
+PKG_SOURCE_VERSION:=a1e7571a07ad309301954149884b13f71fbf74be
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-state/files/ucentral-state

@@ -20,9 +20,68 @@ let config;
 let offline_timer;
 let current_state;
 let online = false;
+let leds_off = false;
 
 function self_healing() {
+	let heal_wifi = false;
+	let health_stat = json(fs.readfile('/tmp/ucentral.health'));
+	let last_nw_restart_ts = int(fs.readfile('/tmp/ucentral.nw_restart_ts')) || 0;
+	let time_passed_since_nw_restart = time() - last_nw_restart_ts;
 
+	if (health_stat) {
+		if (health_stat.data.rrm_chanutil == false) {
+			// RRM with Channel utilization abnormal, restart rrmd
+			ulog(LOG_INFO, 'RRM with Channel utilization abnormal, restarting rrmd\n');
+			system('/etc/init.d/rrmd restart');
+		}
+
+		if (health_stat.sanity != 100) {
+			for (let iface in health_stat.data.interfaces) {
+				let iface_data = health_stat.data.interfaces[iface];
+				if (iface_data.ssids) {
+					// one of the VAPs have an issue: flag up!
+					heal_wifi = true;
+					ulog(LOG_INFO, 'Time passed since last network restart = %d seconds\n', time_passed_since_nw_restart);
+					break;
+				}
+			}
+		} else {
+			// all VAPs are healthy, no need to heal anything
+			return;
+		}
+	}
+
+	if (fs.stat('/tmp/rrm_timestamp')) {
+		let rrm_chan_switch_flag = int(fs.readfile('/tmp/rrm_chan_switch')) || 0;
+		let last_rrm_timestamp = int(fs.readfile('/tmp/rrm_timestamp'));
+		let time_passed_since_rrm = time() - last_rrm_timestamp;
+
+		if (rrm_chan_switch_flag == 1) {
+			// RRM chan switch in progress, do not restart network!
+			ulog(LOG_INFO, 'RRM channel switch in progress, cannot restart network \n');
+			heal_wifi = false;
+		}
+
+		if (time_passed_since_rrm < 180) {
+			// RRM in progress, do not restart network!
+			ulog(LOG_INFO, 'RRM with Channel utilization may still be in progress, cannot restart network \n');
+			heal_wifi = false;
+		}
+	}
+
+	// keep a gap of at least 5 minutes between network restarts
+	if (heal_wifi && time_passed_since_nw_restart > 300) {
+		ulog(LOG_INFO, 'Restarting network \n');
+		// update network restart timestamp
+		let f = fs.open("/tmp/ucentral.nw_restart_ts", "w");
+		if (f) {
+			f.write(time());
+			f.close();
+		}
+
+		// restart network
+		system('/etc/init.d/network restart');
+	}
 }
 
 let healthcheck;
@@ -42,7 +101,7 @@ healthcheck = {
 	},
 
 	spawn: function() {
-		ulog(LOG_INFO, 'healtcheck execute\n');
+		ulog(LOG_INFO, 'healthcheck execute\n');
 		healthcheck.pid = uloop.process('/usr/share/ucentral/health.uc', [], {}, healthcheck.complete);
 	},
 };
@@ -90,6 +149,13 @@ function online_handler() {
 
 function config_load() {
 	ulog(LOG_INFO, 'loading config\n');
+
+	uci.load('system');
+	let led_off_cfg = uci.get("system", "@system[0]", "leds_off");
+	if (led_off_cfg == 1) {
+		leds_off = true;
+	}
+
 	uci.load('state');
 	config = uci.get_all('state');
 
@@ -133,7 +199,7 @@ function led_find(alias) {
 function factory_reset_timeout() {
 	let led = led_find('led-running');
 	if (led)
-		led_write(led, 'trigger', 'default-on');
+		led_write(led, 'trigger', leds-off ? 'none' : 'default-on');
 }
 
 let blink_timer;
@@ -152,7 +218,7 @@ let state_handler = {
 	offline: function() {
 		online = false;
 		let led = led_find('led-running');
-		if (led)
+		if (!leds_off && led)
 			led_write(led, 'trigger', 'heartbeat');
 		if (config.ui.offline_trigger) {
 			if (offline_timer)
@@ -165,7 +231,7 @@ let state_handler = {
 	online: function() {
 		online = true;
 		let led = led_find('led-running');
-		if (led)
+		if (!leds_off && led)
 			led_write(led, 'trigger', 'default-on');
 		online_handler();
 		return 0;
@@ -207,7 +273,7 @@ let ubus_methods = {
 			current_state = req.args.state;
 			blink_timeout();
 			ulog(LOG_INFO, 'set state -> ' + req.args.state + '\n');
-			
+
 			return state_handler[req.args.state](req.args);
 		},
 		args: {

feeds/ucentral/ucentral-tools/Makefile

@@ -3,12 +3,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=ucentral-tools
 PKG_RELEASE:=1
 
-PKG_SOURCE_URL=https://github.com/blogic/ucentral-tools.git
-PKG_MIRROR_HASH:=9ae6a0cd431595871c233550427c4043c2ba7ddb3c5d87e46ab74a03b2b5a947
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-01-28
-PKG_SOURCE_VERSION:=b013fc636e48d407870a46aaa68a09ed74de8d6f
-
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/src/CMakeLists.txt

@@ -0,0 +1,36 @@
+cmake_minimum_required(VERSION 2.6)
+
+PROJECT(openwifi-tools C)
+INCLUDE(GNUInstallDirs)
+ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
+
+SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
+
+ADD_EXECUTABLE(firstcontact firstcontact.c)
+TARGET_LINK_LIBRARIES(firstcontact curl crypto ssl ubox)
+INSTALL(TARGETS firstcontact
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(dhcpdiscover dhcpdiscover.c)
+INSTALL(TARGETS dhcpdiscover
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(dnsprobe dnsprobe.c)
+TARGET_LINK_LIBRARIES(dnsprobe ubox resolv)
+INSTALL(TARGETS dnsprobe
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(radiusprobe radiusprobe.c)
+TARGET_LINK_LIBRARIES(radiusprobe radcli)
+INSTALL(TARGETS radiusprobe
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)
+
+ADD_EXECUTABLE(ip-collide ip-collide.c)
+TARGET_LINK_LIBRARIES(ip-collide ubox)
+INSTALL(TARGETS ip-collide
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)

feeds/ucentral/ucentral-tools/src/dnsprobe.c

@@ -0,0 +1,690 @@
+/*
+ * nslookup_lede - musl compatible replacement for busybox nslookup
+ *
+ * Copyright (C) 2017 Jo-Philipp Wich <jo@mein.io>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+//config:config NSLOOKUP_OPENWRT
+//config:	bool "nslookup_openwrt"
+//config:	depends on !NSLOOKUP
+//config:	default y
+//config:	help
+//config:	  nslookup is a tool to query Internet name servers (LEDE flavor).
+//config:
+//config:config FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
+//config:       bool "Enable long options"
+//config:       default y
+//config:       depends on NSLOOKUP_OPENWRT && LONG_OPTS
+//config:       help
+//config:         Support long options for the nslookup applet.
+
+//applet:IF_NSLOOKUP_OPENWRT(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_NSLOOKUP_OPENWRT) += nslookup_lede.o
+
+//usage:#define nslookup_lede_trivial_usage
+//usage:       "[HOST] [SERVER]"
+//usage:#define nslookup_lede_full_usage "\n\n"
+//usage:       "Query the nameserver for the IP address of the given HOST\n"
+//usage:       "optionally using a specified DNS server"
+//usage:
+//usage:#define nslookup_lede_example_usage
+//usage:       "$ nslookup localhost\n"
+//usage:       "Server:     default\n"
+//usage:       "Address:    default\n"
+//usage:       "\n"
+//usage:       "Name:       debian\n"
+//usage:       "Address:    127.0.0.1\n"
+
+#include <stdio.h>
+#include <resolv.h>
+#include <string.h>
+#include <errno.h>
+#include <time.h>
+#include <poll.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/socket.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <netdb.h>
+
+#include <libubox/ulog.h>
+
+#define ENABLE_FEATURE_IPV6	1
+
+typedef struct len_and_sockaddr {
+	socklen_t len;
+	union {
+		struct sockaddr sa;
+		struct sockaddr_in sin;
+#if ENABLE_FEATURE_IPV6
+		struct sockaddr_in6 sin6;
+#endif
+	} u;
+} len_and_sockaddr;
+
+struct ns {
+	const char *name;
+	len_and_sockaddr addr;
+	int failures;
+	int replies;
+};
+
+struct query {
+	const char *name;
+	size_t qlen, rlen;
+	unsigned char query[512], reply[512];
+	unsigned long latency;
+	int rcode, n_ns;
+};
+
+static const char *rcodes[] = {
+	"NOERROR",
+	"FORMERR",
+	"SERVFAIL",
+	"NXDOMAIN",
+	"NOTIMP",
+	"REFUSED",
+	"YXDOMAIN",
+	"YXRRSET",
+	"NXRRSET",
+	"NOTAUTH",
+	"NOTZONE",
+	"RESERVED11",
+	"RESERVED12",
+	"RESERVED13",
+	"RESERVED14",
+	"RESERVED15",
+	"BADVERS"
+};
+
+static unsigned int default_port = 53;
+static unsigned int default_retry = 1;
+static unsigned int default_timeout = 2;
+
+
+static int parse_reply(const unsigned char *msg, size_t len, int *bb_style_counter)
+{
+	ns_msg handle;
+	ns_rr rr;
+	int i, n, rdlen;
+	const char *format = NULL;
+	char astr[INET6_ADDRSTRLEN], dname[MAXDNAME];
+	const unsigned char *cp;
+
+	if (ns_initparse(msg, len, &handle) != 0) {
+		//fprintf(stderr, "Unable to parse reply: %s\n", strerror(errno));
+		return -1;
+	}
+
+	for (i = 0; i < ns_msg_count(handle, ns_s_an); i++) {
+		if (ns_parserr(&handle, ns_s_an, i, &rr) != 0) {
+			//fprintf(stderr, "Unable to parse resource record: %s\n", strerror(errno));
+			return -1;
+		}
+
+		rdlen = ns_rr_rdlen(rr);
+
+		switch (ns_rr_type(rr))
+		{
+		case ns_t_a:
+			if (rdlen != 4) {
+				//fprintf(stderr, "Unexpected A record length\n");
+				return -1;
+			}
+			inet_ntop(AF_INET, ns_rr_rdata(rr), astr, sizeof(astr));
+			printf("Name:\t%s\nAddress: %s\n", ns_rr_name(rr), astr);
+			break;
+
+#if ENABLE_FEATURE_IPV6
+		case ns_t_aaaa:
+			if (rdlen != 16) {
+				//fprintf(stderr, "Unexpected AAAA record length\n");
+				return -1;
+			}
+			inet_ntop(AF_INET6, ns_rr_rdata(rr), astr, sizeof(astr));
+			printf("%s\thas AAAA address %s\n", ns_rr_name(rr), astr);
+			break;
+#endif
+
+		case ns_t_ns:
+			if (!format)
+				format = "%s\tnameserver = %s\n";
+			/* fall through */
+
+		case ns_t_cname:
+			if (!format)
+				format = "%s\tcanonical name = %s\n";
+			/* fall through */
+
+		case ns_t_ptr:
+			if (!format)
+				format = "%s\tname = %s\n";
+			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+				ns_rr_rdata(rr), dname, sizeof(dname)) < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+			printf(format, ns_rr_name(rr), dname);
+			break;
+
+		case ns_t_mx:
+			if (rdlen < 2) {
+				fprintf(stderr, "MX record too short\n");
+				return -1;
+			}
+			n = ns_get16(ns_rr_rdata(rr));
+			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+				ns_rr_rdata(rr) + 2, dname, sizeof(dname)) < 0) {
+				//fprintf(stderr, "Cannot uncompress MX domain: %s\n", strerror(errno));
+				return -1;
+			}
+			printf("%s\tmail exchanger = %d %s\n", ns_rr_name(rr), n, dname);
+			break;
+
+		case ns_t_txt:
+			if (rdlen < 1) {
+				//fprintf(stderr, "TXT record too short\n");
+				return -1;
+			}
+			n = *(unsigned char *)ns_rr_rdata(rr);
+			if (n > 0) {
+				memset(dname, 0, sizeof(dname));
+				memcpy(dname, ns_rr_rdata(rr) + 1, n);
+				printf("%s\ttext = \"%s\"\n", ns_rr_name(rr), dname);
+			}
+			break;
+
+		case ns_t_soa:
+			if (rdlen < 20) {
+				//fprintf(stderr, "SOA record too short\n");
+				return -1;
+			}
+
+			printf("%s\n", ns_rr_name(rr));
+
+			cp = ns_rr_rdata(rr);
+			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+			                       cp, dname, sizeof(dname));
+
+			if (n < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+
+			printf("\torigin = %s\n", dname);
+			cp += n;
+
+			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
+			                       cp, dname, sizeof(dname));
+
+			if (n < 0) {
+				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
+				return -1;
+			}
+
+			printf("\tmail addr = %s\n", dname);
+			cp += n;
+
+			printf("\tserial = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\trefresh = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\tretry = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\texpire = %lu\n", ns_get32(cp));
+			cp += 4;
+
+			printf("\tminimum = %lu\n", ns_get32(cp));
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	return i;
+}
+
+static int parse_nsaddr(const char *addrstr, len_and_sockaddr *lsa)
+{
+	char *eptr, *hash, ifname[IFNAMSIZ];
+	unsigned int port = default_port;
+	unsigned int scope = 0;
+
+	hash = strchr(addrstr, '#');
+
+	if (hash) {
+		*hash++ = '\0';
+		port = strtoul(hash, &eptr, 10);
+
+		if (eptr == hash || *eptr != '\0' || port > 65535) {
+			errno = EINVAL;
+			return -1;
+		}
+	}
+
+	hash = strchr(addrstr, '%');
+
+	if (hash) {
+		for (eptr = ++hash; *eptr != '\0' && *eptr != '#'; eptr++) {
+			if ((eptr - hash) >= IFNAMSIZ) {
+				errno = ENODEV;
+				return -1;
+			}
+
+			ifname[eptr - hash] = *eptr;
+		}
+
+		ifname[eptr - hash] = '\0';
+		scope = if_nametoindex(ifname);
+
+		if (scope == 0) {
+			errno = ENODEV;
+			return -1;
+		}
+	}
+
+#if ENABLE_FEATURE_IPV6
+	if (inet_pton(AF_INET6, addrstr, &lsa->u.sin6.sin6_addr)) {
+		lsa->u.sin6.sin6_family = AF_INET6;
+		lsa->u.sin6.sin6_port = htons(port);
+		lsa->u.sin6.sin6_scope_id = scope;
+		lsa->len = sizeof(lsa->u.sin6);
+		return 0;
+	}
+#endif
+
+	if (!scope && inet_pton(AF_INET, addrstr, &lsa->u.sin.sin_addr)) {
+		lsa->u.sin.sin_family = AF_INET;
+		lsa->u.sin.sin_port = htons(port);
+		lsa->len = sizeof(lsa->u.sin);
+		return 0;
+	}
+
+	errno = EINVAL;
+	return -1;
+}
+
+static unsigned long mtime(void)
+{
+	struct timespec ts;
+	clock_gettime(CLOCK_REALTIME, &ts);
+	return (unsigned long)ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
+}
+
+#if ENABLE_FEATURE_IPV6
+static void to_v4_mapped(len_and_sockaddr *a)
+{
+	if (a->u.sa.sa_family != AF_INET)
+		return;
+
+	memcpy(a->u.sin6.sin6_addr.s6_addr + 12,
+	       &a->u.sin.sin_addr, 4);
+
+	memcpy(a->u.sin6.sin6_addr.s6_addr,
+	       "\0\0\0\0\0\0\0\0\0\0\xff\xff", 12);
+
+	a->u.sin6.sin6_family = AF_INET6;
+	a->u.sin6.sin6_flowinfo = 0;
+	a->u.sin6.sin6_scope_id = 0;
+	a->len = sizeof(a->u.sin6);
+}
+#endif
+
+
+/*
+ * Function logic borrowed & modified from musl libc, res_msend.c
+ */
+
+static int send_queries(struct ns *ns, int n_ns, struct query *queries, int n_queries)
+{
+	int fd;
+	int timeout = default_timeout * 1000, retry_interval, servfail_retry = 0;
+	len_and_sockaddr from = { };
+#if ENABLE_FEATURE_IPV6
+	int one = 1;
+#endif
+	int recvlen = 0;
+	int n_replies = 0;
+	struct pollfd pfd;
+	unsigned long t0, t1, t2;
+	int nn, qn, next_query = 0;
+
+	from.u.sa.sa_family = AF_INET;
+	from.len = sizeof(from.u.sin);
+
+#if ENABLE_FEATURE_IPV6
+	for (nn = 0; nn < n_ns; nn++) {
+		if (ns[nn].addr.u.sa.sa_family == AF_INET6) {
+			from.u.sa.sa_family = AF_INET6;
+			from.len = sizeof(from.u.sin6);
+			break;
+		}
+	}
+#endif
+
+	/* Get local address and open/bind a socket */
+	fd = socket(from.u.sa.sa_family, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
+
+#if ENABLE_FEATURE_IPV6
+	/* Handle case where system lacks IPv6 support */
+	if (fd < 0 && from.u.sa.sa_family == AF_INET6 && errno == EAFNOSUPPORT) {
+		fd = socket(AF_INET, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
+		from.u.sa.sa_family = AF_INET;
+	}
+#endif
+
+	if (fd < 0)
+		return -1;
+
+	if (bind(fd, &from.u.sa, from.len) < 0) {
+		close(fd);
+		return -1;
+	}
+
+#if ENABLE_FEATURE_IPV6
+	/* Convert any IPv4 addresses in a mixed environment to v4-mapped */
+	if (from.u.sa.sa_family == AF_INET6) {
+		setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one));
+
+		for (nn = 0; nn < n_ns; nn++)
+			to_v4_mapped(&ns[nn].addr);
+	}
+#endif
+
+	pfd.fd = fd;
+	pfd.events = POLLIN;
+	retry_interval = timeout / default_retry;
+	t0 = t2 = mtime();
+	t1 = t2 - retry_interval;
+
+	for (; t2 - t0 < timeout; t2 = mtime()) {
+		if (t2 - t1 >= retry_interval) {
+			for (qn = 0; qn < n_queries; qn++) {
+				if (queries[qn].rlen)
+					continue;
+
+				for (nn = 0; nn < n_ns; nn++) {
+					sendto(fd, queries[qn].query, queries[qn].qlen,
+					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
+				}
+			}
+
+			t1 = t2;
+			servfail_retry = 2 * n_queries;
+		}
+
+		/* Wait for a response, or until time to retry */
+		if (poll(&pfd, 1, t1+retry_interval-t2) <= 0)
+			continue;
+
+		while (1) {
+			recvlen = recvfrom(fd, queries[next_query].reply,
+			                   sizeof(queries[next_query].reply), 0,
+			                   &from.u.sa, &from.len);
+
+			/* read error */
+			if (recvlen < 0)
+				break;
+
+			/* Ignore non-identifiable packets */
+			if (recvlen < 4)
+				continue;
+
+			/* Ignore replies from addresses we didn't send to */
+			for (nn = 0; nn < n_ns; nn++)
+				if (memcmp(&from.u.sa, &ns[nn].addr.u.sa, from.len) == 0)
+					break;
+
+			if (nn >= n_ns)
+				continue;
+
+			/* Find which query this answer goes with, if any */
+			for (qn = next_query; qn < n_queries; qn++)
+				if (!memcmp(queries[next_query].reply, queries[qn].query, 2))
+					break;
+
+			if (qn >= n_queries || queries[qn].rlen)
+				continue;
+
+			queries[qn].rcode = queries[next_query].reply[3] & 15;
+			queries[qn].latency = mtime() - t0;
+			queries[qn].n_ns = nn;
+
+			ns[nn].replies++;
+
+			/* Only accept positive or negative responses;
+			 * retry immediately on server failure, and ignore
+			 * all other codes such as refusal. */
+			switch (queries[qn].rcode) {
+			case 0:
+			case 3:
+				break;
+
+			case 2:
+				if (servfail_retry && servfail_retry--) {
+					ns[nn].failures++;
+					sendto(fd, queries[qn].query, queries[qn].qlen,
+					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
+				}
+				/* fall through */
+
+			default:
+				continue;
+			}
+
+			/* Store answer */
+			n_replies++;
+
+			queries[qn].rlen = recvlen;
+
+			if (qn == next_query) {
+				while (next_query < n_queries) {
+					if (!queries[next_query].rlen)
+						break;
+
+					next_query++;
+				}
+			}
+			else {
+				memcpy(queries[qn].reply, queries[next_query].reply, recvlen);
+			}
+
+			if (next_query >= n_queries)
+				return n_replies;
+		}
+	}
+
+	return n_replies;
+}
+
+static struct ns *add_ns(struct ns **ns, int *n_ns, const char *addr)
+{
+	char portstr[sizeof("65535")], *p;
+	len_and_sockaddr a = { };
+	struct ns *tmp;
+	struct addrinfo *ai, *aip, hints = {
+		.ai_flags = AI_NUMERICSERV,
+		.ai_socktype = SOCK_DGRAM
+	};
+
+	if (parse_nsaddr(addr, &a)) {
+		/* Maybe we got a domain name, attempt to resolve it using the standard
+		 * resolver routines */
+
+		p = strchr(addr, '#');
+		snprintf(portstr, sizeof(portstr), "%hu",
+		         (unsigned short)(p ? strtoul(p, NULL, 10) : default_port));
+
+		if (!getaddrinfo(addr, portstr, &hints, &ai)) {
+			for (aip = ai; aip; aip = aip->ai_next) {
+				if (aip->ai_addr->sa_family != AF_INET &&
+				    aip->ai_addr->sa_family != AF_INET6)
+					continue;
+
+#if ! ENABLE_FEATURE_IPV6
+				if (aip->ai_addr->sa_family != AF_INET)
+					continue;
+#endif
+
+				tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
+
+				if (!tmp)
+					return NULL;
+
+				*ns = tmp;
+
+				(*ns)[*n_ns].name = addr;
+				(*ns)[*n_ns].replies = 0;
+				(*ns)[*n_ns].failures = 0;
+				(*ns)[*n_ns].addr.len = aip->ai_addrlen;
+
+				memcpy(&(*ns)[*n_ns].addr.u.sa, aip->ai_addr, aip->ai_addrlen);
+
+				(*n_ns)++;
+			}
+
+			freeaddrinfo(ai);
+
+			return &(*ns)[*n_ns];
+		}
+
+		return NULL;
+	}
+
+	tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
+
+	if (!tmp)
+		return NULL;
+
+	*ns = tmp;
+
+	(*ns)[*n_ns].addr = a;
+	(*ns)[*n_ns].name = addr;
+	(*ns)[*n_ns].replies = 0;
+	(*ns)[*n_ns].failures = 0;
+
+	return &(*ns)[(*n_ns)++];
+}
+
+static struct query *add_query(struct query **queries, int *n_queries,
+                               int type, const char *dname)
+{
+	struct query *tmp;
+	ssize_t qlen;
+
+	tmp = realloc(*queries, sizeof(**queries) * (*n_queries + 1));
+
+	if (!tmp)
+		return NULL;
+
+	memset(&tmp[*n_queries], 0, sizeof(*tmp));
+
+	qlen = res_mkquery(QUERY, dname, C_IN, type, NULL, 0, NULL,
+	                   tmp[*n_queries].query, sizeof(tmp[*n_queries].query));
+
+	tmp[*n_queries].qlen = qlen;
+	tmp[*n_queries].name = dname;
+	*queries = tmp;
+
+	return &tmp[(*n_queries)++];
+}
+
+int main(int argc, char **argv)
+{
+	int rc = 1;
+	struct ns *ns = NULL;
+	struct query *queries = NULL;
+	int n_ns = 0, n_queries = 0;
+	int c = 0;
+
+	char *url = "telecominfraproject.com";
+	char *server = "127.0.0.1";
+	int v6 = 0;
+
+	while (1) {
+		int option = getopt(argc, argv, "u:s:i:6");
+
+		if (option == -1)
+			break;
+
+		switch (option) {
+		case '6':
+			v6 = 1;
+			break;
+		case 'u':
+			url = optarg;
+			break;
+		case 's':
+			server = optarg;
+			break;
+		default:
+		case 'h':
+			printf("Usage: dnsprobe OPTIONS\n"
+			       "  -6 - use ipv6\n"
+			       "  -u <url>\n"
+			       "  -s <server>\n");
+			return -1;
+		}
+	}
+
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "dnsprobe");
+
+	ULOG_INFO("attempting to probe dns - %s %s %s\n",
+		url, server, v6 ? "ipv6" : "");
+
+
+	add_query(&queries, &n_queries, v6 ? T_AAAA : T_A, url);
+
+	add_ns(&ns, &n_ns, server);
+
+	rc = send_queries(&ns[0], 1, queries, n_queries);
+	if (rc <= 0) {
+		fprintf(stderr, "Failed to send queries: %s\n", strerror(errno));
+		rc = -1;
+		goto out;
+	}
+
+	if (queries[0].rcode != 0) {
+		printf("** server can't find %s: %s\n", queries[0].name,
+		rcodes[queries[0].rcode]);
+		goto out;
+	}
+
+	if (queries[0].rlen) {
+		c = parse_reply(queries[0].reply, queries[0].rlen, NULL);
+	}
+
+	if (c == 0)
+		printf("*** Can't find %s: No answer\n", queries[0].name);
+	else if (c < 0)
+		printf("*** Can't find %s: Parse error\n", queries[0].name);
+	else
+		rc = 0;
+
+out:
+	if (n_ns)
+		free(ns);
+
+	if (n_queries)
+		free(queries);
+
+	return rc;
+}

feeds/ucentral/ucentral-tools/src/firstcontact.c

@@ -0,0 +1,100 @@
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <getopt.h>
+
+#include <curl/curl.h>
+
+#include <libubox/ulog.h>
+
+static const char *file_cert = "/etc/open-wifi/client.pem";
+static const char *file_key  = "/etc/open-wifi/client_dec.key";
+static const char *file_json = "/etc/open-wifi/redirector.json";
+static const char *file_dbg  = "/tmp/firstcontact.hdr";
+
+int main(int argc, char **argv)
+{
+	FILE *fp_json;
+	FILE *fp_dbg;
+	CURLcode res;
+	CURL *curl;
+	char *devid = NULL;
+	char *url;
+
+	while (1) {
+		int option = getopt(argc, argv, "k:c:o:hi:");
+
+		if (option == -1)
+			break;
+
+		switch (option) {
+		case 'k':
+			file_key = optarg;
+			break;
+		case 'c':
+			file_cert = optarg;
+			break;
+		case 'o':
+			file_json = optarg;
+			break;
+		case 'i':
+			devid = optarg;
+			break;
+		default:
+		case 'h':
+			printf("Usage: firstcontact OPTIONS\n"
+			       "  -k <keyfile>\n"
+			       "  -c <certfile>\n"
+			       "  -o <outfile>\n"
+			       "  -i <devid>\n");
+			return -1;
+		}
+	}
+
+	if (!devid) {
+		fprintf(stderr, "missing devid\n");
+		return -1;
+	}
+
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "firstcontact");
+	ULOG_INFO("attempting first contact\n");
+
+	fp_dbg = fopen(file_dbg, "wb");
+	fp_json = fopen(file_json, "wb");
+	if (!fp_json) {
+		ULOG_ERR("failed to create %s\n", file_json);
+		return -1;
+	}
+
+	curl_global_init(CURL_GLOBAL_DEFAULT);
+	curl = curl_easy_init();
+	if (!curl) {
+		ULOG_ERR("curl_easy_init failed\n");
+		return -1;
+	}
+
+	if (asprintf(&url, "https://clientauth.demo.one.digicert.com/iot/api/v2/device/%s", devid) < 0) {
+		ULOG_ERR("failed to assemble url\n");
+		return -1;
+	}
+
+	curl_easy_setopt(curl, CURLOPT_URL, url);
+	curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp_json);
+	curl_easy_setopt(curl, CURLOPT_HEADERDATA, fp_dbg);
+	curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLCERT, file_cert);
+	curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
+	curl_easy_setopt(curl, CURLOPT_SSLKEY, file_key);
+	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
+
+	res = curl_easy_perform(curl);
+	if (res != CURLE_OK)
+		ULOG_ERR("curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
+	else
+		ULOG_INFO("downloaded first contact data\n");
+	curl_easy_cleanup(curl);
+	curl_global_cleanup();
+
+	ulog_close();
+
+	return (res != CURLE_OK);
+}

feeds/ucentral/ucentral-tools/src/ip-collide.c

@@ -0,0 +1,86 @@
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include <libubox/list.h>
+#include <libubox/ulog.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+struct route {
+	struct list_head list;
+	char devname[64];
+	uint32_t domain;
+	uint32_t mask;
+};
+
+static struct list_head routes = LIST_HEAD_INIT(routes);
+
+static int parse_routes(void)
+{
+	FILE *fp = fopen("/proc/net/route", "r");
+	int flgs, ref, use, metric, mtu, win, ir;
+	struct route *route;
+	unsigned long g;
+	int r;
+
+	r = fscanf(fp, "%*[^\n]\n");
+	if (r < 0) {
+		fprintf(stderr, "failed to parse routes\n");
+		return -1;
+	}
+	while (1) {
+		route = malloc(sizeof(*route));
+		if (!route)
+			break;
+		memset(route, 0, sizeof(*route));
+		r = fscanf(fp, "%63s%x%lx%X%d%d%d%x%d%d%d\n",
+			route->devname, &route->domain, &g, &flgs, &ref, &use, &metric, &route->mask,
+			&mtu, &win, &ir);
+		if (r != 11 && (r < 0) && feof(fp))
+			break;
+		list_add(&route->list, &routes);
+		printf("1 %s %x %x\n", route->devname, ntohl(route->domain), ntohl(route->mask));
+	}
+
+	fclose(fp);
+
+	return 0;
+}
+
+static int find_collisions(void)
+{
+	struct route *route;
+
+	list_for_each_entry(route, &routes, list) {
+		struct route *compare;
+
+		if (!route->domain || !route->mask)
+			continue;
+		list_for_each_entry(compare, &routes, list) {
+			if (!compare->domain || !compare->mask)
+				continue;
+			if (compare == route)
+				continue;
+			if (((route->domain & route->mask) == (compare->domain & route->mask)) ||
+			    ((route->domain & compare->mask) == (compare->domain & compare->mask))) {
+				ULOG_ERR("collision detected\n");
+				return 1;
+			}
+		}
+	}
+	ULOG_INFO("no collision detected\n");
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "ip-collide");
+
+	parse_routes();
+	if (!list_empty(&routes))
+		return find_collisions();
+
+	return 0;
+}

feeds/ucentral/ucentral-tools/src/radiusprobe.c

@@ -0,0 +1,47 @@
+#include <stdio.h>
+#include <string.h>
+#include <radcli/radcli.h>
+
+int
+main(int argc, char **argv)
+{
+	int result;
+	char username[128];
+	char passwd[AUTH_PASS_LEN + 1];
+	VALUE_PAIR *send, *received;
+	uint32_t service;
+	rc_handle *rh;
+
+	/* Not needed if you already used openlog() */
+	rc_openlog("radiusprobe");
+
+	if ((rh = rc_read_config("/tmp/radius.conf")) == NULL)
+		return ERROR_RC;
+
+	strcpy(username, "healthcheck");
+	strcpy(passwd, "uCentral");
+
+	send = NULL;
+
+	if (rc_avpair_add(rh, &send, PW_USER_NAME, username, -1, 0) == NULL)
+		return ERROR_RC;
+
+	if (rc_avpair_add(rh, &send, PW_USER_PASSWORD, passwd, -1, 0) == NULL)
+		return ERROR_RC;
+
+	service = PW_AUTHENTICATE_ONLY;
+	if (rc_avpair_add(rh, &send, PW_SERVICE_TYPE, &service, -1, 0) == NULL)
+		return ERROR_RC;
+
+	result = rc_auth(rh, 0, send, &received, NULL);
+
+	if (result == OK_RC || result == REJECT_RC) {
+		fprintf(stderr, "RADIUS server OK\n");
+		result = 0;
+	} else {
+		fprintf(stderr, "RADIUS server failure\n");
+		result = -1;
+	}
+
+	return result;
+}

feeds/ucentral/udevmand/Makefile

@@ -2,17 +2,9 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=udevmand
 PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL=https://github.com/blogic/udevmand.git
-PKG_MIRROR_HASH:=6f6a5536656a64e1f38f03747ef06ab03b28ef797adc72a901eb7dbc6e45e496
-PKG_SOURCE_DATE:=20250704
-PKG_SOURCE_VERSION:=e56be31d7c341467cc26714dac5c6b450a612808
 CMAKE_INSTALL:=1
-
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=
-
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 
 include $(INCLUDE_DIR)/package.mk

feeds/ucentral/udevmand/src/CMakeLists.txt

@@ -0,0 +1,15 @@
+cmake_minimum_required(VERSION 2.6)
+
+include_directories(/usr/local/include/libnl-tiny)
+
+PROJECT(udevmand C)
+INCLUDE(GNUInstallDirs)
+ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
+
+SET(LIBS ubox ubus json-c blobmsg_json uci nl-tiny)
+
+ADD_EXECUTABLE(udevmand main.c mac.c neigh.c ubus.c blob.c netlink.c bridge.c dhcp.c netifd.c ethers.c netdev.c)
+TARGET_LINK_LIBRARIES(udevmand ${LIBS})
+INSTALL(TARGETS udevmand
+	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
+)

feeds/ucentral/udevmand/src/COPYING

@@ -0,0 +1,502 @@
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!

feeds/ucentral/udevmand/src/blob.c

@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2017 John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "udevmand.h"
+
+struct blob_buf b = { 0 };
+
+static char *iftype_string[NUM_NL80211_IFTYPES] = {
+	[NL80211_IFTYPE_STATION] = "station",
+	[NL80211_IFTYPE_AP] = "ap",
+	[NL80211_IFTYPE_MONITOR] = "monitor",
+	[NL80211_IFTYPE_ADHOC] = "adhoc",
+};
+
+void blobmsg_add_iface(struct blob_buf *bbuf, char *name, int index)
+{
+	static char _ifname[IF_NAMESIZE];
+	char *ifname = if_indextoname(index, _ifname);
+
+	if (!ifname)
+		return;
+	blobmsg_add_string(&b, name, ifname);
+}
+
+void blobmsg_add_iftype(struct blob_buf *bbuf, const char *name, const uint32_t iftype)
+{
+	if (iftype_string[iftype])
+		blobmsg_add_string(&b, name, iftype_string[iftype]);
+	else
+		blobmsg_add_u32(&b, name, iftype);
+}
+
+void blobmsg_add_ipv4(struct blob_buf *bbuf, const char *name, const uint8_t* addr)
+{
+	char ip[16];
+
+	snprintf(ip, sizeof(ip), "%d.%d.%d.%d", addr[0], addr[1], addr[2], addr[3]);
+	blobmsg_add_string(&b, name, ip);
+}
+
+void blobmsg_add_ipv6(struct blob_buf *bbuf, const char *name, const uint8_t* _addr)
+{
+	const uint16_t* addr = (const uint16_t*) _addr;
+	char ip[40];
+
+	snprintf(ip, sizeof(ip), "%x:%x:%x:%x:%x:%x:%x:%x",
+		ntohs(addr[0]), ntohs(addr[1]), ntohs(addr[2]), ntohs(addr[3]),
+		ntohs(addr[4]), ntohs(addr[5]), ntohs(addr[6]), ntohs(addr[7]));
+	blobmsg_add_string(&b, name, ip);
+}
+
+void blobmsg_add_mac(struct blob_buf *bbuf, const char *name, const uint8_t* addr)
+{
+	char mac[18];
+
+	snprintf(mac, sizeof(mac), "%02x:%02x:%02x:%02x:%02x:%02x",
+		addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+	blobmsg_add_string(&b, name, mac);
+}

feeds/ucentral/udevmand/src/bridge.c

@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 2020 John Crispin <john@phrozen.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "udevmand.h"
+
+#include <linux/if_bridge.h>
+
+#define BR_MAX_ENTRY	2048
+
+static struct uloop_timeout bridge_timer;
+static struct vlist_tree bridge_mac;
+static LIST_HEAD(bridge_if);
+
+struct bridge_if {
+	struct list_head list;
+
+	char name[IF_NAMESIZE];
+	unsigned int port_no;
+};
+
+static void
+bridge_read_mac(const char *bridge)
+{
+	FILE *fd;
+	int i, cnt;
+	struct __fdb_entry fe[BR_MAX_ENTRY];
+	char path[PATH_MAX];
+
+	snprintf(path, PATH_MAX, "/sys/class/net/%s/brforward", bridge);
+	fd = fopen(path, "r");
+	if (!fd)
+		return;
+
+	cnt = fread(fe, sizeof(struct __fdb_entry), BR_MAX_ENTRY, fd);
+	fclose(fd);
+
+	for (i = 0; i < cnt; i++) {
+		struct bridge_mac *b = malloc(sizeof(*b));
+		struct bridge_if *brif;
+
+		if (!b)
+			continue;
+		strncpy(b->bridge, bridge, IF_NAMESIZE);
+		strncpy(b->ifname, bridge, IF_NAMESIZE);
+		list_for_each_entry(brif, &bridge_if, list)
+			if (fe[i].port_no == brif->port_no)
+				strncpy(b->ifname, brif->name, IF_NAMESIZE);
+		memcpy(b->addr, fe[i].mac_addr, ETH_ALEN);
+		b->port_no = fe[i].port_no;
+		vlist_add(&bridge_mac, &b->vlist, (void *) b);
+	}
+}
+
+void
+bridge_dump_if(const char *bridge)
+{
+	char path[PATH_MAX];
+	void *c = NULL;
+	glob_t gl;
+	int i;
+
+	snprintf(path, PATH_MAX, "/sys/class/net/%s/brif/*", bridge);
+	if (glob(path, GLOB_MARK | GLOB_ONLYDIR | GLOB_NOSORT, NULL, &gl))
+		return;
+
+	for (i = 0; i < gl.gl_pathc; i++) {
+		if (!c)
+			c = blobmsg_open_array(&b, "bridge");
+
+		blobmsg_add_string(&b, NULL, basename(gl.gl_pathv[i]));
+	}
+	if (c)
+		blobmsg_close_array(&b, c);
+
+	globfree(&gl);
+}
+
+static void
+bridge_read_if(const char *bridge)
+{
+	struct bridge_if *brif;
+	char path[PATH_MAX];
+	glob_t gl;
+	int i;
+
+	snprintf(path, PATH_MAX, "/sys/class/net/%s/brif/*", bridge);
+	if (glob(path, GLOB_MARK | GLOB_ONLYDIR | GLOB_NOSORT, NULL, &gl))
+		return;
+
+	for (i = 0; i < gl.gl_pathc; i++) {
+		unsigned int port_no;
+		FILE *fd;
+		int ret;
+
+		snprintf(path, PATH_MAX, "/sys/class/net/%s/brif/%s/port_no", bridge, basename(gl.gl_pathv[i]));
+		fd = fopen(path, "r");
+		if (!fd)
+			continue;
+		ret = fscanf(fd, "0x%x", &port_no);
+		fclose(fd);
+		if (ret != 1)
+			continue;
+		brif = malloc(sizeof(*brif));
+		if (!brif)
+			goto out;
+		strcpy(brif->name, basename(gl.gl_pathv[i]));
+		brif->port_no = port_no;
+		list_add(&brif->list, &bridge_if);
+
+	}
+out:
+	globfree(&gl);
+}
+
+static void bridge_tout(struct uloop_timeout *t)
+{
+	struct bridge_if *brif, *tmp;
+	glob_t gl;
+
+	int i;
+
+	if (glob("/sys/class/net/*", GLOB_MARK | GLOB_ONLYDIR | GLOB_NOSORT, NULL, &gl))
+		goto out;
+
+	list_for_each_entry_safe(brif, tmp, &bridge_if, list) {
+		list_del(&brif->list);
+		free(brif);
+	}
+
+	for (i = 0; i < gl.gl_pathc; i++)
+		bridge_read_if(basename(gl.gl_pathv[i]));
+	vlist_update(&bridge_mac);
+	for (i = 0; i < gl.gl_pathc; i++)
+		bridge_read_mac(basename(gl.gl_pathv[i]));
+	vlist_flush(&bridge_mac);
+	globfree(&gl);
+
+out:
+	uloop_timeout_set(&bridge_timer, 1000);
+}
+
+static int bridge_cmp(const void *k1, const void *k2, void *ptr)
+{
+	const struct bridge_mac *b1 = (const struct bridge_mac *)k1;
+	const struct bridge_mac *b2 = (const struct bridge_mac *)k2;
+
+	return memcmp(b1->addr, b2->addr, ETH_ALEN);
+}
+
+static void bridge_update(struct vlist_tree *tree, struct vlist_node *node_new, struct vlist_node *node_old)
+{
+	struct bridge_mac *b1, *b2;
+
+	b1 = container_of(node_old, struct bridge_mac, vlist);
+	b2 = container_of(node_new, struct bridge_mac, vlist);
+
+	if (!!b1 != !!b2) {
+		struct bridge_mac *_b = b1 ? b1 : b2;
+
+		ULOG_INFO("%s fdb %s:%d "MAC_FMT"\n", b1 ? "del" : "new", _b->ifname, _b->port_no, MAC_VAR(_b->addr));
+	}
+
+	if (b1) {
+		list_del(&b1->mac);
+		free(b1);
+	}
+
+	if (b2) {
+		struct mac *mac = NULL;
+
+		mac = mac_find(b2->addr);
+		mac_update(mac, b2->bridge);
+		list_add(&b2->mac, &mac->bridge_mac);
+	}
+}
+
+void bridge_init(void)
+{
+	bridge_timer.cb = bridge_tout;
+	uloop_timeout_set(&bridge_timer, 1000);
+	vlist_init(&bridge_mac, bridge_cmp, bridge_update);
+}
+
+void bridge_flush(void)
+{
+	struct bridge_if *brif, *tmp;
+
+	vlist_flush_all(&bridge_mac);
+	list_for_each_entry_safe(brif, tmp, &bridge_if, list) {
+		list_del(&brif->list);
+		free(brif);
+	}
+}
+
+void
+bridge_mac_del(struct bridge_mac *b)
+{
+	list_del(&b->mac);
+	vlist_delete(&bridge_mac, &b->vlist);
+	free(b);
+}
+
+