qca-wifi-7: hostapd.sh: add missed functionality from ipq807x_v5.4

The main reason was adding missed functionality for Radius
configuration which caused rejecting WiFi clients on
authentication level.

Still some changes not included:
* AFC,
* hs20_release,
* multiple_bssid,
* he_co_locate

Fixes: WIFI-14459

Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -53,7 +53,6 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
-	sonicfi-rap650c \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -411,7 +410,6 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -21,7 +21,6 @@ edgecore,oap103)
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
 sonicfi,rap630w-311g|\
-sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -24,7 +24,6 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
-	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -51,16 +50,6 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
-	sonicfi,rap650c)
-		mac=$(fw_printenv -n BaseMacAddress)
-		[ -z "$mac" ] && return;
-		wan_mac=$(macaddr_canonicalize $mac)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ucidef_set_network_device_mac eth1 $lan_mac
-		ip link set eth0 address $wan_mac
-		ip link set eth1 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,20 +16,6 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_sonicfi() {
-	mac=$(fw_printenv -n BaseMacAddress)
-	[ -z "$mac" ] && return;
-
-	touch /lib/firmware/ath11k-macs
-	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
-	mac3=$(macaddr_add $eth 4)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -77,7 +63,6 @@ case "$FIRMWARE" in
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
-	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -112,9 +97,6 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
-	sonicfi*)
-		ath11k_generate_macs_sonicfi
-		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,8 +10,7 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103"|\
-    "sonicfi,rap650c")
+    "edgecore,oap103")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,7 +29,6 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
-	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -84,17 +83,5 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
-	sonicfi,rap650c)
-		boot_part=$(fw_printenv -n bootfrom)
-		[ ${#boot_part} -eq 0 ] && boot_part=0
-		echo "Current bootfrom is $boot_part"
-		if [[ $boot_part == 1 ]]; then
-			CI_UBIPART="rootfs"
-			CI_FWSETENV="bootfrom 0"
-		elif [[ $boot_part == 0 ]]; then
-			CI_UBIPART="rootfs_1"
-			CI_FWSETENV="bootfrom 1"
-		fi
-		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -1,650 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "SonicFi RAP650C";
-	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
-	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		pinctrl@1000000 {
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio57";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			usb_mux_sel_pins: usb_mux_pins {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			pcie0_pins: pcie_pins {
-				pcie0_rst {
-					pins = "gpio58";
-					function = "pcie0_rst";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				pcie0_wake {
-					pins = "gpio59";
-					function = "pcie0_wake";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio25";
-					function = "gpio";
-					bias-pull-up;
-				};
-				mux_3 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-
-			led_pins: led_pins {
-				red {
-					pins = "gpio0";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				green {
-					pins = "gpio2";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				blue {
-					pins = "gpio9";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			spi_3_pins: spi_3_pins {
-				mux {
-					pins = "gpio50", "gpio52", "gpio53";
-					function = "blsp3_spi";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				spi_cs {
-					pins = "gpio22";
-					function = "blsp3_spi2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				quartz_interrupt {
-					pins = "gpio47";
-					function = "gpio";
-					input;
-					bias-disable;
-				};
-				quartz_reset {
-					pins = "gpio21";
-					function = "gpio";
-					output-low;
-					bias-disable;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <5>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <24>;
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001a00 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		spi@78b8000 {
-			status = "ok";
-			pinctrl-0 = <&spi_3_pins>;
-			pinctrl-names = "default";
-			cs-select = <2>;
-			quartz-reset-gpio = <&tlmm 21 1>;
-
-			spidev3: spi@3 {
-				  compatible = "qti,spidev";
-				  reg = <0>;
-				  spi-max-frequency = <24000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		qusb@79000 {
-			status = "ok";
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		usb3@8A00000 {
-			status = "ok";
-		};
-
-		qusb@59000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		usb3@8C00000 {
-			status = "ok";
-		};
-
-		phy@84000 {
-			status = "ok";
-		};
-
-		phy@86000 {
-			status = "ok";
-		};
-
-		pci@20000000 {
-			perst-gpio = <&tlmm 58 1>;
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-
-			red {
-				label = "sys:red";
-				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			green {
-				label = "sys:green";
-				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led_power: blue {
-				label = "sys:blue";
-				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <24>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <24>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		nss-macsec0 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&wifi0 {
-	qcom,board_id = <0x90>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x290>;
-};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,17 +57,6 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
-define Device/sonicfi_rap650c
-  DEVICE_TITLE := SonicFi RAP650C
-  DEVICE_DTS := qcom-ipq807x-rap650c
-  DEVICE_DTS_CONFIG=config@hk09
-  SUPPORTED_DEVICES := sonicfi,rap650c
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap650c
-
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -53,27 +53,11 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP750W_311a
 endef
 
-define Package/ath12k-wifi-cig-wf189h
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for WF189H
-endef
-
 define Package/ath12k-wifi-cig-wf189w
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF189W
 endef
 
-define Package/ath12k-wifi-sercomm-ap72tip
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for AP72TIP
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip-v4
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for AP72TIP-v4
-endef
-
-
 define Package/ath12k-wifi-cig-wf189/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
 	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
@@ -112,34 +96,8 @@ define Package/ath12k-wifi-cig-wf189w/install
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
-
-define Package/ath12k-wifi-cig-wf189h/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.ap72tip.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.ap72tip.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip-v4/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.QCN92XX $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.ap72tip-v4.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-endef
-
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
-$(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))
-$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))
-$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip-v4))

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-QCN92XX.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-QCN92XX.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "qcn92xx.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-IPQ5332.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-v4-IPQ5332.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=ahb,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ipq5332.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/board-2-ap72tip-v4-QCN92XX.json

@@ -1,20 +0,0 @@
-[
-    {
-        "board": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "ap72tip-v4-QCN92XX.bin"
-            }
-        ],
-        "regdb": [
-            {
-                "names": [
-                    "bus=pci,qmi-chip-id=0,qmi-board-id=255"
-                ],
-                "data": "qcn92xx.regdb"
-            }
-        ]
-    }
-]

feeds/qca-wifi-7/ath12k-wifi/generate.sh

@@ -9,9 +9,3 @@ $encoder -c board-2-eap105-QCN92XX.json -o board-2.bin.eap105.QCN92XX
 
 $encoder -c board-2-rap7110c_341x-IPQ5332.json -o board-2.bin.rap7110c_341x.IPQ5332
 $encoder -c board-2-rap7110c_341x-QCN92XX.json -o board-2.bin.rap7110c_341x.QCN92XX
-
-$encoder -c board-2-ap72tip-IPQ5332.json -o board-2.bin.ap72tip.IPQ5332
-$encoder -c board-2-ap72tip-QCN92XX.json -o board-2.bin.ap72tip.QCN92XX
-
-$encoder -c board-2-ap72tip-v4-IPQ5332.json -o board-2.bin.ap72tip-v4.IPQ5332
-$encoder -c board-2-ap72tip-v4-QCN92XX.json -o board-2.bin.ap72tip-v4.QCN92XX

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -7,14 +7,14 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-sercomm,ap72tip-v4|\
 sercomm,ap72tip)
-	ucidef_set_led_default "power" "POWER" "blue:status" "on"
 	ucidef_set_led_netdev "wan_link" "wan_link" "green:phy" "eth0" "link"
 	ucidef_set_led_netdev "wan_act" "wan_act" "yellow:phy" "eth0" "rx tx"
 	;;
-sonicfi,rap7110c-341x|\
-sonicfi,rap750w-311a)
+sonicfi,rap7110c-341x)
+	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
+	;;
+cig,wf189w)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
 esac

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -22,16 +22,8 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
 	cig,wf189w)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan" "1:lan"
+		ucidef_add_switch "switch1" "5u@eth0" "3:lan" "2:lan" "1:lan" "0u@eth1" "4:wan"
 		;;
-	cig,wf189h)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
-		;;
-	sercomm,ap72tip-v4)
-		ucidef_set_interface_wan "eth0"
-		;;	
 	esac
 }
 
@@ -40,7 +32,6 @@ qcom_setup_macs()
         local board="$1"
         case $board in
 	cig,wf189w|\
-	cig,wf189h|\
         cig,wf189)
 		mtd=$(find_mtd_chardev "0:APPSBLENV")
 		[ -z "$mtd" ] && return;
@@ -55,30 +46,12 @@ qcom_setup_macs()
 		ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
 		ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
                 ;;
-        sercomm,ap72tip)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                lan_mac=$(cat /sys/class/net/eth1/address)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 4)
-                ;;
         edgecore,eap105)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
-        sonicfi,rap7110c-341x)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
-                ;;
+        sonicfi,rap7110c-341x|\
         sonicfi,rap750w-311a)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                lan_mac=$(macaddr_add "$wan_mac" 1)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ;;
-        sercomm,ap72tip-v4)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -28,10 +28,8 @@ case "$FIRMWARE" in
 ath12k/IPQ5332/hw1.0/caldata.bin)
 	case "$board" in
 	cig,wf189w|\
-	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
-	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x1000 0x20000 
 		;;
@@ -47,7 +45,6 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 	case "$board" in
 	cig,wf189|\
 	edgecore,eap105|\
-	sercomm,ap72tip-v4|\
 	sercomm,ap72tip)
 		caldata_extract "0:ART" 0x58800 0x2d000
 		;;
@@ -59,13 +56,12 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 ath12k/QCN6432/hw1.0/caldata_1.bin)
 	case "$board" in
 	sonicfi,rap750w-311a)
-		caldata_extract "0:ART" 0x12800 0x18800
+		caldata_extract "0:ART" 0x26800 0x18800
 		;;
 	esac
 	;;
 ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi1@c0000000.bin)
 	case "$board" in
-	cig,wf189h|\
 	cig,wf189w)
 		caldata_extract "0:ART" 0x26800 0x20000
 		;;
@@ -73,7 +69,6 @@ ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi1@c0000000.bin)
 	;;
 ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi2@c0000000.bin)
 	case "$board" in
-	cig,wf189h|\
 	cig,wf189w)
 		caldata_extract "0:ART" 0x58800 0x20000
 		;;

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/smp-affinity

@@ -1,77 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
-	# For CE(assigned 2 core to copy engine)
-	# using 3 core will cause firmware crash due to bss channel survey timed out
-	i=0
-	cpu_mul=2
-	ce="ce"
-	ce1="ce_"
-	ce_name="$ce$i"
-	ce_name1="$ce1$i"
-	while [ $i -lt 15 ]
-	do
-		cpu=1
-		for irq_num in `grep -e "$ce_name" -e "$ce_name1" /proc/interrupts | cut -d ':' -f 1`
-		do
-			[ -n "$irq_num" ] && echo $cpu > /proc/irq/$irq_num/smp_affinity
-			cpu=$((cpu * cpu_mul))
-			if [ $cpu -gt 4 ] ; then cpu=1; fi
-		done
-	i=$((i+1))
-	ce_name="$ce$i"
-	ce_name1="$ce1$i"
-	done
-
-	#For IPQ5332 2G radio
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2ost-exception' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-rx-release' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-status' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-
-	# 5G and 6G radio
-	# pci0 and pci1 for Wkiki (two radio and one radio split mode)
-	# pcic1 and pcic2 are for Pebble
-	for j in pci0 pci1 pcic1 pcic2; do
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_4 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_5 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_6 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_7 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_0 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_1 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_2 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_11 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_3 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_8 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-        done
-}

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -87,7 +87,6 @@ platform_do_upgrade() {
 	board=$(board_name)
 	case $board in
 	cig,wf189w|\
-	cig,wf189h|\
 	cig,wf189)
 		if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
 			CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"
@@ -120,9 +119,5 @@ platform_do_upgrade() {
 		sonicfi_dualimage_check
 		nand_upgrade_tar "$1"
 		;;
-	sercomm,ap72tip-v4|\
-	sercomm,ap72tip)
-		nand_upgrade_tar "$1"
-		;;
 	esac
 }

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -23,10 +23,6 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
 	};
 
 	chosen {
@@ -44,11 +40,9 @@
 			uniphyaddr_fixup = <0xC90F014>;
 			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
 			tip,clk_div = <0xff>; /* MDIO Frequency reduction*/
-			limit_rtlphy_10g_ablity;
 
 			phy0: ethernet-phy@0 {
 				reg = <8>;
-				compatible ="ethernet-phy-ieee802.3-c45";
 			};
 
 			phy1: ethernet-phy@1 {
@@ -184,26 +178,13 @@
 			pinctrl-0 = <&gpio_leds_default>;
 			pinctrl-names = "default";
 
-		led_power_blue: led@26 {
-                        label = "status:blue";
-                        gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                	};
-
-                led_power_green:led@30 {
-                        label = "status:green";
-                        gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                };
-
-                led_power_red:led@45 {
-                        label = "status:red";
-                        gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                };
+			led-0 {
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WLAN;
+				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy0tx";
+				default-state = "off";
+			};
 		};
 
 		gpio_keys {
@@ -213,9 +194,9 @@
 			status = "okay";
 
 			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
@@ -481,7 +462,7 @@
 	};
 
 	button_pins: button-state {
-		pins = "gpio17";
+		pins = "gpio35";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -500,24 +481,6 @@
 		bias-pull-up;
 		output-low;
 	};
-
-	led_pins: led_pins {
-                mux_1 {
-                        pins = "gpio26";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-                mux_2 {
-                        pins = "gpio30";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-                mux_3 {
-                        pins = "gpio45";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-        };
 };
 
 &license_manager {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -1,777 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP446 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "ipq5332.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "CIG WF189H";
-	compatible = "cig,wf189h", "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332-rdp446", "qcom,ipq5332";
-
-	/*     1G  Layout for IPQ5332 + QCN6432 + QCN6432
-	 * +==========+==============+========================+
-	 * |         |              |                         |
-	 * |  Region | Start Offset |          Size           |
-	 * |         |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * |   Q6    |              |                         |
-	 * |  code/  |  0x4A900000  |          25MB           |
-	 * |  data   |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  data   |  0x4C200000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * | M3 Dump |  0x4D700000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  QDSS   |  0x4D800000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  CALDB  |  0x4D900000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  data   |  0x4DE00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * | M3 Dump |  0x4F300000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  QDSS   |  0x4E400000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  CALDB  |  0x4F500000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  data   |  0x4FA00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * | M3 Dump |  0x50F00000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  QDSS   |  0x51000000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  CALDB  |  0x51100000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |         |              |                         |
-	 * |   MLO   |  0x51600000  |          12MB           |
-	 * +==================================================+
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * |             Rest of memory for Linux             |
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * +==================================================+
-	 */
-
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			reg = <0x0 0x4a900000 0x0 0x6D00000>;
-			no-map;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-			no-map;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			reg = <0x0 0x4C200000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump: m3_dump@4D700000 {
-			reg = <0x0 0x4D700000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_etr_region: q6_etr_dump@4D800000 {
-			reg = <0x0 0x4D800000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
-			reg = <0x0 0x4D900000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
-			reg = <0x0 0x4DE00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
-			reg = <0x0 0x4F500000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
-			reg = <0x0 0x4FA00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
-			reg = <0x0 0x50F00000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
-			reg = <0x0 0x51000000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
-			reg = <0x0 0x51100000 0x0 0x500000>;
-			no-map;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@51600000 {
-			reg = <0x0 0x51600000 0x0 0xC00000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &blsp1_uart0;
-		serial1 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins &mdio0_pins>;
-			pinctrl-names = "default";
-			/*gpio51 for manhattan reset*/
-      phy-reset-gpio = <&tlmm 22 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-				fixup;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <2>;
-				fixup;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <3>;
-				fixup;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <4>;
-				fixup;
-			};
-
-			switch0@10 {
-				compatible = "qca,qca8386";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x10>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						label = "cpu";
-						ethernet = <&gmac2>;
-						dsa-tag-protocol = "qca_4b";
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan1";
-						phy-handle = <&phy0>;
-						phy-mode = "usxgmii";
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan2";
-						phy-handle = <&phy1>;
-						phy-mode = "usxgmii";
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan3";
-						phy-handle = <&phy2>;
-						phy-mode = "usxgmii";
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan4";
-						phy-handle = <&phy3>;
-						phy-mode = "usxgmii";
-					};
-
-					port@5 {
-						reg = <5>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					}; 
-				};
-			};
-		};
-
-		pwmleds {
-			compatible = "pwm-leds";
-
-			led_power_red: red {
-				label = "pwm:red";
-				pwms = <&pwm 3 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_green: green {
-				label = "pwm:green";
-				pwms = <&pwm 2 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_blue: blue {
-				label = "pwm:blue";
-				pwms = <&pwm 1 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-
-			ess-switch@3a000000 {
-				pinctrl-names = "default";
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x2>; /* lan port bitmap */
-				switch_wan_bmp = <0x4>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <4>;
-					};
-				};
-			};
-
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca8386";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio>;
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
-				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-//				link-polling-required = <0>;
-				fdb_sync = "interrupt";
-				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <0>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <1>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <2>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <3>;
-						phy_address = <3>;
-					};
-				};
-
-				led_source@2 {
-					source = <2>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@5 {
-					source = <5>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@8 {
-					source = <8>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@11 {
-					source = <11>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-			phy-mode = "sgmii";
-		};
-
-		gmac2:dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <3>;
-			status = "okay";
-			chip_info = <0 2 1 2>,
-				    <1 2 2 0>,
-				    <2 2 0 1>;
-		};
-
-		q6v5_wcss: remoteproc@d100000 {
-			boot-args = <0x1 0x4 0x3 0x1 0x2f 0x2>,
-					<0x1 0x4 0x4 0x2 0x2c 0x2>;
-			memory-region = <&q6_mem_regions>,
-					<&mlo_global_mem0>;
-
-			/delete-node/ remoteproc_pd1;
-			/delete-node/ remoteproc_pd2;
-			/delete-node/ remoteproc_pd3;
-
-			q6_wcss_pd4: remoteproc_pd4 {
-				compatible = "qcom,ipq5332-mpd-upd-text";
-				firmware = "IPQ5332/q6_fw4.mdt";
-
-				q6_wcss_pd1: remoteproc_pd1 {
-					compatible = "qcom,ipq5332-wcss-ahb-mpd";
-					firmware = "IPQ5332/q6_fw1.mdt";
-					m3_firmware = "IPQ5332/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 8 0>,
-							<&wcss_smp2p_in 9 0>,
-							<&wcss_smp2p_in 12 0>,
-							<&wcss_smp2p_in 11 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 8>,
-							<&wcss_smp2p_out 9>,
-							<&wcss_smp2p_out 10>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-				};
-
-				q6_wcss_pd2: remoteproc_pd2 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw2.mdt";
-					m3_firmware = "qcn6432/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 16 0>,
-							<&wcss_smp2p_in 17 0>,
-							<&wcss_smp2p_in 20 0>,
-							<&wcss_smp2p_in 19 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 16>,
-							<&wcss_smp2p_out 17>,
-							<&wcss_smp2p_out 18>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-
-				q6_wcss_pd3: remoteproc_pd3 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw3.mdt";
-					interrupts-extended = <&wcss_smp2p_in 24 0>,
-							<&wcss_smp2p_in 25 0>,
-							<&wcss_smp2p_in 28 0>,
-							<&wcss_smp2p_in 27 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 24>,
-							<&wcss_smp2p_out 25>,
-							<&wcss_smp2p_out 26>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-			};
-		};
-	};
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&tlmm {
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	pwm_pins: pwm_pinmux {
-		/* PWM LED GREEN */
-		mux_1 {
-			pins = "gpio30";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED BLUE */
-		mux_2 {
-			pins = "gpio31";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED RED */
-		mux_3 {
-			pins = "gpio29";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux {
-		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-
-	button_pins: button-state {
-		pins = "gpio21";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	mdio1_pins: mdio1-state {
-		mux_0 {
-			pins = "gpio27";
-			function = "mdc1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio28";
-			function = "mdio1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&pwm {
-        pinctrl-0 = <&pwm_pins>;
-        used-pwm-indices = <1>, <1>, <0>, <1>;
-        pinctrl-names = "default";
-        status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&wifi0 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D900000 0x4D900000 0x4D900000 0x0 0x0 0x0>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x41>;
-	mem-region = <&q6_ipq5332_data>;
-	memory-region = <&q6_ipq5332_data>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	status = "okay";
-};
-
-&wifi1 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd2>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4DE00000 0x4DE00000 0x4DE00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4F500000 0x4F500000 0x4F500000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x20000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x061>;
-	mem-region = <&q6_qcn6432_data_1>;
-	memory-region = <&q6_qcn6432_data_1>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <1>;
-	status = "okay";
-	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};
-
-&wifi2 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd3>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4FA00000 0x4FA00000 0x4FA00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x51100000 0x51100000 0x51100000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x18000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x0b1>;
-	mem-region = <&q6_qcn6432_data_2>;
-	memory-region = <&q6_qcn6432_data_2>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <2>;
-	status = "okay";
-	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -166,10 +166,10 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -261,21 +261,21 @@
 		pwmleds {
 			compatible = "pwm-leds";
 
-			led_power_red: red {
+			red {
 				label = "pwm:red";
 				pwms = <&pwm 3 1250000>;
 				max-brightness = <160>;
 				linux,default-trigger = "none";
 			};
 
-			led_power_green: green {
+			green {
 				label = "pwm:green";
 				pwms = <&pwm 2 1250000>;
 				max-brightness = <160>;
 				linux,default-trigger = "none";
 			};
 
-			led_power_blue: blue {
+			led_power: blue {
 				label = "pwm:blue";
 				pwms = <&pwm 1 1250000>;
 				max-brightness = <160>;
@@ -307,7 +307,7 @@
 				switch_lan_bmp = <0x2>; /* lan port bitmap */
 				switch_wan_bmp = <0x4>; /* wan port bitmap */
 				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+				switch_mac_mode1 = <0xc>; /* mac mode for uniphy instance1*/
 				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
 
 				qcom,port_phyinfo {
@@ -318,7 +318,8 @@
 					};
 					port@1 {
 						port_id = <2>;
-						phy_address = <4>;
+						forced-speed = <2500>;
+						forced-duplex = <1>;
 					};
 				};
 			};
@@ -330,9 +331,9 @@
 				mdio-bus = <&mdio>;
 				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
 				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_cpu_bmp = <0x21>;  /* cpu port bitmap */
 				switch_lan_bmp = <0x0e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				switch_wan_bmp = <0x10>;  /* wan port bitmap */
 //				link-polling-required = <0>;
 				fdb_sync = "interrupt";
 				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
@@ -355,6 +356,15 @@
 						port_id = <3>;
 						phy_address = <3>;
 					};
+					port@4 {
+						port_id = <4>;
+						phy_address = <4>;
+					};
+					port@5 {
+						port_id = <5>;
+						forced-speed = <2500>;
+						forced-duplex = <1>; 
+					};
 				};
 
 				led_source@2 {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip-v4.dts

@@ -1,591 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Sercomm WiFi-7";
-	compatible = "sercomm,ap72tip-v4", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		serial1 = &blsp1_uart1; /*ble*/
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-	
-#if 0   //AQR114C
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-
-			phy1: ethernet-phy@1 {   //aqr114c
-				reg = <0>;
-				compatible ="ethernet-phy-ieee802.3-c45";
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 { //aqr114c
-						port_id = <2>;
-						phy_address = <0>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-		
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};	
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,phy-mdio-addr = <0>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-#else //SFP	
-		mdio:mdio@90000 { 
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio0 for napa*/
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			status = "okay";
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <30>;
-						media-type = "sfp"; 
-					};
-				};
-			};
-		};
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <30>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-#endif
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-                compatible = "gpio-leds";
-
-				led@25 {
-					label = "blue:status";
-					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
-                    default-state = "off";
-                };
-				led@61 {
-					label = "green:phy";
-					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
-				};
-				led@62 {
-					label = "yellow:phy";
-					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
-				};
-		};
-		
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-				    <1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_i2c2 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&blsp1_spi0 {   //nor flash
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11"; 
-		//, "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_spi1 {   /*tpm*/
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "okay";
-	
-	tpm: spi-tpm@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,st33htpm-spi";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		status = "okay";
-	};
-};
-
-&pcm {
-	pinctrl-0 = <&audio_pins_pri>;
-	pinctrl-names = "primary";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x100f>;  //0x1019->0x100f
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	audio_pins_pri: audio_pinmux_pri {
-		mux_1 {
-			pins = "gpio29";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio30";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio31";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio32";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_0_pins: i2c-0-state {
-		pins = "gpio43", "gpio45";
-		function = "blsp2_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_1_pins: spi-1-pins {  /* tpm */
-		pins = "gpio29", "gpio30", "gpio31", "gpio32";
-		function = "blsp1_spi0";
-		drive-strength = <8>;
-		bias-pull-down;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-/*	gpio_leds_default: gpio-leds-default-state {
-		pins = "gpio36";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-down;
-	};*/
-	
-	button_pins: button-state {
-		pins = "gpio1";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio47";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};
-
-//sercomm add
-&wifi3 {
-	/* QCN9224 5G+6G */
-	hremote_node = <&qcn9224_pcie1>;
-	qcom,board_id = <0x100f>; 
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sercomm-ap72tip.dts

@@ -1,601 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP468 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332.dtsi"
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "Sercomm WiFi-7";
-	compatible = "sercomm,ap72tip", "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
-
-	aliases {
-		serial0 = &blsp1_uart0; /*console*/
-		serial1 = &blsp1_uart1; /*ble*/
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-	
-#if 1   //AQR114C
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-
-			phy1: ethernet-phy@1 {   //aqr114c
-				reg = <0>;
-				compatible ="ethernet-phy-ieee802.3-c45";
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-						mdiobus = <&mdio>;
-					};
-					port@1 { //aqr114c
-						port_id = <2>;
-						phy_address = <0>;
-						mdiobus = <&mdio>;
-						ethernet-phy-ieee802.3-c45;
-					};
-				};
-			};
-		};
-		
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};	
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,phy-mdio-addr = <0>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-#else //SFP	
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <24>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			mdio-bus = <&mdio>;
-			qcom,phy-mdio-addr = <30>;
-			qcom,link-poll = <1>;
-			phy-mode = "sgmii";
-		};
-
-		mdio:mdio@90000 { 
-			status = "okay";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			/*gpio0 for napa*/
-			phy-reset-gpio = <&tlmm 0 0>;
-
-			phy0: ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			ess-switch@3a000000 {
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0>; /* lan port bitmap */
-				switch_wan_bmp = <0x6>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1  sfp PORT_WRAPPER_10GBASE_R*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <24>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <30>;
-						media-type = "sfp"; 
-					};
-				};
-			};
-		};
-
-#endif
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		leds {
-                compatible = "gpio-leds";
-
-				led@25 {
-					label = "blue:status";
-					gpios = <&tca6416 9 GPIO_ACTIVE_HIGH>;
-                    default-state = "off";
-                };
-				led@24 {
-					label = "red:status";
-					gpios = <&tca6416 10 GPIO_ACTIVE_HIGH>;
-				};
-				led_power: led@16 {
-                                label = "green:status";
-					gpios = <&tca6416 11 GPIO_ACTIVE_HIGH>;
-				};
-				led@61 {
-					label = "green:phy";
-					gpios = <&tca6416 15 GPIO_ACTIVE_HIGH>;
-				};
-				led@62 {
-					label = "yellow:phy";
-					gpios = <&tca6416 14 GPIO_ACTIVE_HIGH>;
-				};
-		};
-/*
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};*/
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <2>;
-			status = "okay";
-			chip_info = <0 1 1>,
-				    <1 1 0>;
-		};
-	};
-};
-
-&wifi0 {
-//	led-gpio = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	memory-region = <&q6_region>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	qcom,board_id = <0x16>;
-	status = "okay";
-};
-
-&qcn9224_pcie1 {
-	status = "okay";
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&blsp1_i2c2 {
-	clock-frequency  = <400000>;
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&blsp1_spi0 {   //nor flash
-	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "n25q128a11"; 
-		//, "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_spi1 {   /*tpm*/
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "okay";
-	
-	tpm: spi-tpm@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,st33htpm-spi";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		status = "okay";
-	};
-};
-
-&pcm {
-	pinctrl-0 = <&audio_pins_pri>;
-	pinctrl-names = "primary";
-	status = "disabled";
-};
-
-&sdhc {
-	bus-width = <4>;
-	max-frequency = <192000000>;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	pinctrl-0 = <&sdc_default_state>;
-	pinctrl-names = "default";
-	status = "disabled";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&pcie1_phy_x2 {
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-0 = <&pcie1_default_state>;
-	pinctrl-names = "default";
-	perst-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pcie1_rp {
-		reg = <0 0 0 0 0>;
-
-		qcom,mhi@1 {
-			reg = <0 0 0 0 0>;
-			boot-args = <0x2 0x4 0x34 0x3 0x0 0x0     /* MX Rail, GPIO52, Drive strength 0x3 */
-					0x4 0x4 0x18 0x3 0x0 0x0  /* RFA1p2 Rail, GPIO24, Drive strength 0x3 */
-					0x0 0x4 0x0 0x0 0x0 0x0>; /* End of arguments */
-			memory-region = <&qcn9224_pcie1>;
-			qcom,wsi = <&wsi>;
-			qcom,wsi_index = <1>;
-			qcom,board_id = <0x100f>;  //0x1019->0x100f
-		};
-	};
-};
-
-/* PINCTRL */
-
-&tlmm {
-
-	audio_pins_pri: audio_pinmux_pri {
-		mux_1 {
-			pins = "gpio29";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_2 {
-			pins = "gpio30";
-			function = "audio_pri";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		mux_3 {
-			pins = "gpio31";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-
-		mux_4 {
-			pins = "gpio32";
-			function = "audio_pri";
-			drive-strength = <4>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_0_pins: i2c-0-state {
-		pins = "gpio43", "gpio45";
-		function = "blsp2_i2c0";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_1_pins: spi-1-pins {  /* tpm */
-		pins = "gpio29", "gpio30", "gpio31", "gpio32";
-		function = "blsp1_spi0";
-		drive-strength = <8>;
-		bias-pull-down;
-	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio13";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio12";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux { /*ble*/
-//		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		pins = "gpio33", "gpio35";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-/*	gpio_leds_default: gpio-leds-default-state {
-		pins = "gpio36";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-down;
-	};*/
-/*
-	button_pins: button-state {
-		pins = "gpio25";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};*/
-
-	pwm_pins: pwm-state {
-		pins = "gpio46";
-		function = "pwm0";
-		drive-strength = <8>;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		pins = "gpio47";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-		output-low;
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&usb3 {
-	qcom,multiplexed-phy;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&ssuniphy_0 {
-	status = "okay";
-};
-
-//sercomm add
-&wifi3 {
-	/* QCN9224 5G+6G */
-	hremote_node = <&qcn9224_pcie1>;
-	qcom,board_id = <0x100f>; 
-	status = "okay";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750w-311a.dts

@@ -242,10 +242,6 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -328,6 +324,19 @@
 			};
 		};
 
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&gpio_leds_default>;
+			pinctrl-names = "default";
+
+			led-0 {
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WLAN;
+				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy0tx";
+				default-state = "off";
+			};
+		};
 
 		gpio_keys {
 			compatible = "gpio-keys";
@@ -336,39 +345,14 @@
 			status = "okay";
 
 			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
 		};
 
-		pwmleds {
-			compatible = "pwm-leds";
-
-			red {
-				label = "pwm:red";
-				pwms = <&pwm 2 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		
-			green {
-				label = "pwm:green";
-				pwms = <&pwm 3 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		
-			led_power: blue {
-				label = "pwm:blue";
-				pwms = <&pwm 1 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		};
-
 		ess-instance {
 			num_devices = <0x2>;
 
@@ -427,6 +411,34 @@
 					};
 				};
 
+				led_source@2 {
+					source = <2>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@5 {
+					source = <5>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@8 {
+					source = <8>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@11 {
+					source = <11>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
 			};
 		};
 
@@ -537,7 +549,7 @@
 			memory-region = <&q6_mem_regions>;
 
 			q6_wcss_pd1: remoteproc_pd1 {
-				status = "okay";
+				status = "ok";
 			};
 
 			q6_wcss_pd2: remoteproc_pd2 {
@@ -558,7 +570,7 @@
 				qcom,smem-state-names = "shutdown",
 							"stop",
 							"spawn";
-				status = "okay";
+				status = "ok";
 			};
 		};
 	};
@@ -569,13 +581,13 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
-/*
+
 &blsp1_uart1 {
         pinctrl-0 = <&serial_1_pins>;
         pinctrl-names = "default";
         status = "disabled";
 };
-*/
+
 &blsp1_i2c1 {
 	clock-frequency  = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
@@ -652,50 +664,29 @@
 		};
 	};
 
-	pwm_pins: pwm_pinmux {
-			/* PWM LED GREEN */
-			mux_1 {
-				pins = "gpio43";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-			/* PWM LED BLUE */
-			mux_2 {
-				pins = "gpio45";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-			/* PWM LED RED */
-			mux_3 {
-				pins = "gpio44";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-	};
-/*
 	serial_1_pins: serial1-pinmux {
 		pins = "gpio33", "gpio34", "gpio35", "gpio36";
 		function = "blsp1_uart2";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-*/
+
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio29", "gpio30";
 		function = "blsp1_i2c0";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-/*
+
 	gpio_leds_default: gpio-leds-default-state {
 		pins = "gpio36";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-down;
-	}; 
-*/
+	};
+
 	button_pins: button-state {
-		pins = "gpio24";
+		pins = "gpio35";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -734,13 +725,6 @@
 	status = "disabled";
 };
 
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	used-pwm-indices = <0>, <1>, <1>, <1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
 &hs_m31phy_0 {
 	status = "okay";
 };
@@ -763,7 +747,7 @@
 	memory-region = <&q6_ipq5332_data>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <0>;
-	status = "okay";
+	status = "ok";
 };
 
 &wifi1 {
@@ -784,7 +768,7 @@
 	memory-region = <&q6_qcn6432_data_1>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <1>;
-	status = "okay";
+	status = "ok";
 	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
 	interrupt-names = "umac_reset";
 };

feeds/qca-wifi-7/ipq53xx/dts/ipq5332.dtsi

@@ -736,36 +736,6 @@
 			status = "disabled";
 		};
 
-		blsp1_spi1: spi@78b6000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x078b6000 0x600>;
-			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
-			spi-max-frequency = <50000000>;
-			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-		
-		blsp1_i2c2: i2c@78b7000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x78b7000 0x600>;
-			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			clock-frequency  = <400000>;
-			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
 		blsp1_i2c1: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x600>;

feeds/qca-wifi-7/ipq53xx/files-6.1/drivers/net/phy/rtk/rtk_phy.c

@@ -7,7 +7,6 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
-#include <linux/of.h>
 
 #include "phy_rtl826xb_patch.h"
 #include "phy_rtl8251b_patch.h"
@@ -31,7 +30,6 @@ static int rtl8251_match_phy_device(struct phy_device *phydev)
 static int rtl826xb_get_features(struct phy_device *phydev)
 {
     int ret;
-    struct device_node *np;
     ret = genphy_c45_pma_read_abilities(phydev);
     if (ret)
         return ret;
@@ -50,14 +48,6 @@ static int rtl826xb_get_features(struct phy_device *phydev)
     linkmode_clear_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
                        phydev->supported);
 
-    np = of_find_node_by_name(NULL, "mdio");
-    if (np)
-	if (of_property_read_bool(np, "limit_rtlphy_10g_ablity"))
-	{
-		linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported);
-	}
-
-
     return 0;
 }
 
@@ -90,6 +80,7 @@ static int rtkphy_config_init(struct phy_device *phydev)
         case REALTEK_PHY_ID_RTL8261N:
         case REALTEK_PHY_ID_RTL8264B:
             phydev_info(phydev, "%s:%u [RTL8261N/RTL826XB] phy_id: 0x%X PHYAD:%d\n", __FUNCTION__, __LINE__, phydev->drv->phy_id, phydev->mdio.addr);
+	    phy_modify_mmd_changed(phydev, 7, 0x20, BIT(12), 0);
 
           #if 1 /* toggle reset */
             phy_modify_mmd_changed(phydev, 30, 0x145, BIT(0)  , 1);
@@ -222,6 +213,7 @@ static int rtkphy_c45_aneg_done(struct phy_device *phydev)
 static int rtkphy_c45_read_status(struct phy_device *phydev)
 {
     int ret = 0, status = 0;
+    uint16_t local;
     phydev->speed = SPEED_UNKNOWN;
     phydev->duplex = DUPLEX_UNKNOWN;
     phydev->pause = 0;
@@ -240,6 +232,9 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
         if (ret)
             return ret;
 	
+	phy_write_mmd(phydev, 7, 0x20, 0x181);
+	local = phy_read_mmd(phydev, 7, 0x20);
+
         status =  phy_read_mmd(phydev, 31, 0xA414);
         if (status < 0)
             return status;
@@ -247,6 +242,11 @@ static int rtkphy_c45_read_status(struct phy_device *phydev)
             phydev->lp_advertising, status & BIT(11));
 
         phy_resolve_aneg_linkmode(phydev);
+	if((phydev->speed == 10000) && (local == 0x181))
+        {
+                phydev->speed = 5000;
+                phydev->duplex = DUPLEX_FULL;
+        }
     }
     else
     {

feeds/qca-wifi-7/ipq53xx/generic/config-6.1-platform

@@ -2288,7 +2288,7 @@ CONFIG_GPIOLIB_FASTPATH_LIMIT=512
 # CONFIG_GPIO_ML_IOH is not set
 # CONFIG_GPIO_MOCKUP is not set
 # CONFIG_GPIO_MPC8XXX is not set
-CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCA953X_IRQ is not set
 # CONFIG_GPIO_PCA9570 is not set
 # CONFIG_GPIO_PCF857X is not set

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -14,30 +14,16 @@ endef
 TARGET_DEVICES += cig_wf189
 
 define Device/sercomm_ap72tip
-  DEVICE_TITLE := Sercomm AP72TIP
+  DEVICE_TITLE := Sercomm AP72 TIP
   DEVICE_DTS := ipq5332-sercomm-ap72tip
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
+  DEVICE_DTS_CONFIG := config@mi01.2-qcn9160-c1
   IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
   DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
 endef
-TARGET_DEVICES += sercomm_ap72tip
-
-define Device/sercomm_ap72tip-v4
-  DEVICE_TITLE := Sercomm AP72TIP-v4
-  DEVICE_DTS := ipq5332-sercomm-ap72tip-v4
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi01.6
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-sercomm-ap72tip-v4 ath12k-firmware-qcn92xx ath12k-firmware-ipq5332
-endef
-TARGET_DEVICES += sercomm_ap72tip-v4
+#TARGET_DEVICES += sercomm_ap72tip
 
 define Device/edgecore_eap105
   DEVICE_TITLE := Edgecore EAP105
@@ -75,7 +61,7 @@ define Device/sonicfi_rap750w_311a
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb -ath12k-firmware-qcn92xx
+  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb
 endef
 TARGET_DEVICES += sonicfi_rap750w_311a
 
@@ -91,17 +77,3 @@ define Device/cig_wf189w
   DEVICE_PACKAGES := ath12k-wifi-cig-wf189w ath12k-firmware-ipq5332-peb-peb
 endef
 TARGET_DEVICES += cig_wf189w
-
-
-define Device/cig_wf189h
-  DEVICE_TITLE := CIG WF189H
-  DEVICE_DTS := ipq5332-cig-wf189h
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi04.1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-cig-wf189h ath12k-firmware-ipq5332-peb-peb
-endef
-TARGET_DEVICES += cig_wf189h

feeds/qca-wifi-7/qca-ssdk-qca/patches/0006-qca-ssdk-Fix-10G-rtl-phy-driver-for-c45-mdio-read-wr.patch

@@ -1,116 +0,0 @@
-From 85a7c62d4e3385de1a379959dd45148cfdc95b3b Mon Sep 17 00:00:00 2001
-From: huangyunxiang <huangyunxiang@cigtech.com>
-Date: Tue, 29 Apr 2025 09:56:28 +0800
-Subject: [PATCH] qca-ssdk modify rtl826x phy mdio read/write as c45 mode and
- clear 10G ablity
-
----
- src/hsl/phy/rtl826xb_phy.c                | 55 ++++++-------------
- 1 file changed, 17 insertions(+), 38 deletions(-)
-
-diff --git a/src/hsl/phy/rtl826xb_phy.c b/src/hsl/phy/rtl826xb_phy.c
-index a336348aa9..9a67b45948 100644
---- a/src/hsl/phy/rtl826xb_phy.c
-+++ b/src/hsl/phy/rtl826xb_phy.c
-@@ -48,46 +48,39 @@ void rtl826xb_phy_lock_init(void)
- 
- static a_uint16_t rtl826x_phy_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id)
- {
--	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
--
--	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
-+	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, reg_mmd, reg_id);
- }
- 
- 
- static sw_error_t rtl826x_phy_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t reg_mmd, a_uint16_t reg_id, a_uint16_t reg_val)
- {
--	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(reg_mmd, reg_id);
--
--	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, reg_val);
-+	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, reg_mmd, reg_id, reg_val);
- }
- 
- 
- static a_uint16_t rtl826x_phy_reg_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg)
- {
--	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg);
-+	return hsl_phy_mii_reg_read(dev_id, phy_id, reg);
- }
- 
- 
- static sw_error_t rtl826x_phy_reg_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t reg, a_uint16_t reg_val)
- {
--	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
-+
-+	return hsl_phy_mii_reg_write(dev_id, phy_id, reg, reg_val);
- }
- 
- 
- static a_int16_t hal_miim_mmd_read(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg)
- {
--	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
--
--	return __hsl_phy_mii_reg_read(dev_id, phy_id, reg_id_c45);
-+	return hsl_phy_mmd_reg_read(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg);
- }
- 
- 
- 
- static a_int32_t hal_miim_mmd_write(a_uint32_t dev_id, a_uint32_t phy_id, a_uint16_t mmdAddr, a_uint16_t mmdReg, a_uint16_t phy_data)
- {
--	a_uint32_t reg_id_c45 = RTL826XB_REG_ADDRESS(mmdAddr, mmdReg);
--
--	return __hsl_phy_mii_reg_write(dev_id, phy_id, reg_id_c45, phy_data);
-+	return hsl_phy_mmd_reg_write(dev_id, phy_id, A_TRUE, mmdAddr, mmdReg, phy_data);
- }
- 
- 
-@@ -1281,34 +1274,20 @@ phy_826xb_autoNegoAbility_set(a_uint32_t dev_id, a_uint32_t phy_id, a_uint32_t a
- 	hsl_phy_phydev_autoneg_update(dev_id, phy_id, A_TRUE, autoneg);
- 	
- 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 16);
-+	phyData &= (~(0x0020 | 0x0040 | FAL_PHY_ADV_100TX_HD | FAL_PHY_ADV_100TX_FD | FAL_PHY_ADV_PAUSE | FAL_PHY_ADV_ASY_PAUSE));
-+	phyData |= (autoneg & FAL_PHY_ADV_100TX_HD) ? (FAL_PHY_ADV_100TX_HD) : (0);
-+	phyData |= ((autoneg & FAL_PHY_ADV_100TX_FD)) ? (FAL_PHY_ADV_100TX_FD) : (0);
- 
--    phyData &= (~(0x0020 | 0x0040 | 0x0080 | 0x0100 | 0x0400 | 0x0800));
--	phyData |= ((autoneg & 1 << 1)) ? (0x0040) : (0);
--    phyData |= ((autoneg & 1 << 2)) ? (0x0080) : (0);
--    phyData |= ((autoneg & 1 << 3)) ? (0x0100) : (0);
--	phyData |= ((autoneg & 1 << 4)) ? (0x0400) : (0);
--	phyData |= ((autoneg & 1 << 5)) ? (0x0800) : (0);
--//    phyData |= ((autoneg & 1 << 9)) ? (0x0400) : (0);
--//    phyData |= ((autoneg & 1 << 10)) ? (0x0800) : (0);
--
--    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
--	
-+	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 16, phyData);
- 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_AN, 32);
-+	phyData &= (~(FAL_PHY_ADV_2500T_FD | FAL_PHY_ADV_5000T_FD | FAL_PHY_ADV_10000T_FD));
-+	phyData |= (autoneg & FAL_PHY_ADV_2500T_FD) ? (FAL_PHY_ADV_2500T_FD) : (0);
-+	phyData |= (autoneg & FAL_PHY_ADV_5000T_FD) ? (FAL_PHY_ADV_5000T_FD) : (0);
- 
--    phyData &= (~(0x4000 | 0x2000 | 0x1000));
--    phyData |= (autoneg & 1 << 12) ? (0x0080) : (0);
--    phyData |= (autoneg & 1 << 13) ? (0x0100) : (0);
--    phyData |= (autoneg & 1 << 14) ? (0x1000) : (0);
--
--    phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
--     
--	
-+	phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_AN, 32, phyData);
- 	phyData = phy_common_general_reg_mmd_get(dev_id, phy_id, PHY_MMD_VEND2, 0xA412);
--
--
--    phyData &= (~(0x0100 | 0x0200));
--    phyData |= (autoneg & 1 << 9) ? (0x0200) : (0);
--//    phyData |= (autoneg & 1 << 5) ? (0x0200) : (0);
-+	phyData &= (~(0x0100 | FAL_PHY_ADV_1000T_FD));
-+	phyData |= (autoneg & FAL_PHY_ADV_1000T_FD) ? (FAL_PHY_ADV_1000T_FD) : (0);
- 
-     phy_common_general_reg_mmd_set(dev_id, phy_id, PHY_MMD_VEND2, 0xA412, phyData);
-         
--- 
-2.34.1
-

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -79,8 +79,6 @@ hfcl,ion4xe)
 	;;
 cig,wf186w|\
 cig,wf189|\
-cig,wf189w|\
-cig,wf189h|\
 cig,wf186h|\
 yuncore,ax840|\
 yuncore,fap655)

feeds/ucentral/rrmd/files/etc/init.d/rrmd

@@ -6,8 +6,8 @@ STOP=01
 USE_PROCD=1
 
 start_service() {
-	rm -rf /tmp/threshold_breach_count*
-	rm -rf /tmp/fixed_channel*
+	rm -rf /tmp/threshold_breach_count_phy*
+	rm -rf /tmp/fixed_channel_phy*
 
 	procd_open_instance
 	procd_set_param command /usr/bin/rrmd.uc

feeds/ucentral/rrmd/files/usr/share/rrmd/policy_chanutil.uc

@@ -265,7 +265,7 @@ function dfs_chan_check(iface_num, rcs_channel) {
 }
 
 function fixed_channel_config(iface, iface_num, fixed_channel_f, auto_channel_f, fixed_chan_bkp, channel_config) {
-    // if fixed channel config is stored in the /tmp/fixed_channel_<radio_iface> file
+    // if fixed channel config is stored in the /tmp/fixed_channel_phyX file
     if (fixed_channel_f == 1) {
         if (auto_channel_f == 1) {
             // if current channel is auto => change to fixed
@@ -290,7 +290,6 @@ function fixed_channel_config(iface, iface_num, fixed_channel_f, auto_channel_f,
 function get_chan_util(radio_band, sleep_time) {
 	let pdev_stats = {};
 	let chan_util = 0;
-    let total_usage = 0;
 
     let prev_values = {
 		txFrameCount: null,
@@ -349,8 +348,7 @@ function get_chan_util(radio_band, sleep_time) {
             if (ignore != 1) {
                 let cycle_count_delta = curr_values.cycleCount - prev_values.cycleCount;
                 let rx_clear_delta = curr_values.rxClearCount - prev_values.rxClearCount;
-                if (cycle_count_delta && cycle_count_delta > 0)
-                    total_usage = (rx_clear_delta * 100) / cycle_count_delta;
+                let total_usage = (rx_clear_delta * 100) / cycle_count_delta;
                 chan_util = total_usage;
             }
 
@@ -675,7 +673,7 @@ function channel_optimize() {
                 ulog_info(`[%s] Allowed consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], config.consecutive_threshold_breach);
 
                 if (!current_threshold_breach_count || current_threshold_breach_count == null || current_threshold_breach_count == 'NaN') {
-                    // /tmp/threshold_breach_count_<radio_iface> file doesn't exist yet or has invalid value
+                    // /tmp/phyX_breachcount file doesn't exist yet or has invalid value
                     current_threshold_breach_count = 0;
                 }
                 ulog_info(`[%s] Previous consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], current_threshold_breach_count);

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=280d87658fa36c1d5d6852dcb8203042eba6bbc9101ac317a2088e2dd68249da
+PKG_MIRROR_HASH:=fe33f072d7bcbbb14c7c3415e0750699bb5dae8a9af06c59c90c020f8b192a15
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2025-01-27
-PKG_SOURCE_VERSION:=52afdf8f1d1cb8445b6b56eba3768d0edffa63e1
+PKG_SOURCE_VERSION:=5a6d23b76bc51289ae99d22fdf406516b0c630e6
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/Makefile

@@ -3,6 +3,12 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=ucentral-tools
 PKG_RELEASE:=1
 
+PKG_SOURCE_URL=https://github.com/blogic/ucentral-tools.git
+PKG_MIRROR_HASH:=9ae6a0cd431595871c233550427c4043c2ba7ddb3c5d87e46ab74a03b2b5a947
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2021-01-28
+PKG_SOURCE_VERSION:=b013fc636e48d407870a46aaa68a09ed74de8d6f
+
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

feeds/ucentral/ucentral-tools/src/CMakeLists.txt

@@ -1,36 +0,0 @@
-cmake_minimum_required(VERSION 2.6)
-
-PROJECT(openwifi-tools C)
-INCLUDE(GNUInstallDirs)
-ADD_DEFINITIONS(-Os -ggdb -Wall -Werror --std=gnu99 -Wmissing-declarations)
-
-SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
-
-ADD_EXECUTABLE(firstcontact firstcontact.c)
-TARGET_LINK_LIBRARIES(firstcontact curl crypto ssl ubox)
-INSTALL(TARGETS firstcontact
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(dhcpdiscover dhcpdiscover.c)
-INSTALL(TARGETS dhcpdiscover
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(dnsprobe dnsprobe.c)
-TARGET_LINK_LIBRARIES(dnsprobe ubox resolv)
-INSTALL(TARGETS dnsprobe
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(radiusprobe radiusprobe.c)
-TARGET_LINK_LIBRARIES(radiusprobe radcli)
-INSTALL(TARGETS radiusprobe
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)
-
-ADD_EXECUTABLE(ip-collide ip-collide.c)
-TARGET_LINK_LIBRARIES(ip-collide ubox)
-INSTALL(TARGETS ip-collide
-	RUNTIME DESTINATION ${CMAKE_INSTALL_SBINDIR}
-)

feeds/ucentral/ucentral-tools/src/dnsprobe.c

@@ -1,690 +0,0 @@
-/*
- * nslookup_lede - musl compatible replacement for busybox nslookup
- *
- * Copyright (C) 2017 Jo-Philipp Wich <jo@mein.io>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-//config:config NSLOOKUP_OPENWRT
-//config:	bool "nslookup_openwrt"
-//config:	depends on !NSLOOKUP
-//config:	default y
-//config:	help
-//config:	  nslookup is a tool to query Internet name servers (LEDE flavor).
-//config:
-//config:config FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
-//config:       bool "Enable long options"
-//config:       default y
-//config:       depends on NSLOOKUP_OPENWRT && LONG_OPTS
-//config:       help
-//config:         Support long options for the nslookup applet.
-
-//applet:IF_NSLOOKUP_OPENWRT(APPLET(nslookup, BB_DIR_USR_BIN, BB_SUID_DROP))
-
-//kbuild:lib-$(CONFIG_NSLOOKUP_OPENWRT) += nslookup_lede.o
-
-//usage:#define nslookup_lede_trivial_usage
-//usage:       "[HOST] [SERVER]"
-//usage:#define nslookup_lede_full_usage "\n\n"
-//usage:       "Query the nameserver for the IP address of the given HOST\n"
-//usage:       "optionally using a specified DNS server"
-//usage:
-//usage:#define nslookup_lede_example_usage
-//usage:       "$ nslookup localhost\n"
-//usage:       "Server:     default\n"
-//usage:       "Address:    default\n"
-//usage:       "\n"
-//usage:       "Name:       debian\n"
-//usage:       "Address:    127.0.0.1\n"
-
-#include <stdio.h>
-#include <resolv.h>
-#include <string.h>
-#include <errno.h>
-#include <time.h>
-#include <poll.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <sys/socket.h>
-#include <arpa/inet.h>
-#include <net/if.h>
-#include <netdb.h>
-
-#include <libubox/ulog.h>
-
-#define ENABLE_FEATURE_IPV6	1
-
-typedef struct len_and_sockaddr {
-	socklen_t len;
-	union {
-		struct sockaddr sa;
-		struct sockaddr_in sin;
-#if ENABLE_FEATURE_IPV6
-		struct sockaddr_in6 sin6;
-#endif
-	} u;
-} len_and_sockaddr;
-
-struct ns {
-	const char *name;
-	len_and_sockaddr addr;
-	int failures;
-	int replies;
-};
-
-struct query {
-	const char *name;
-	size_t qlen, rlen;
-	unsigned char query[512], reply[512];
-	unsigned long latency;
-	int rcode, n_ns;
-};
-
-static const char *rcodes[] = {
-	"NOERROR",
-	"FORMERR",
-	"SERVFAIL",
-	"NXDOMAIN",
-	"NOTIMP",
-	"REFUSED",
-	"YXDOMAIN",
-	"YXRRSET",
-	"NXRRSET",
-	"NOTAUTH",
-	"NOTZONE",
-	"RESERVED11",
-	"RESERVED12",
-	"RESERVED13",
-	"RESERVED14",
-	"RESERVED15",
-	"BADVERS"
-};
-
-static unsigned int default_port = 53;
-static unsigned int default_retry = 1;
-static unsigned int default_timeout = 2;
-
-
-static int parse_reply(const unsigned char *msg, size_t len, int *bb_style_counter)
-{
-	ns_msg handle;
-	ns_rr rr;
-	int i, n, rdlen;
-	const char *format = NULL;
-	char astr[INET6_ADDRSTRLEN], dname[MAXDNAME];
-	const unsigned char *cp;
-
-	if (ns_initparse(msg, len, &handle) != 0) {
-		//fprintf(stderr, "Unable to parse reply: %s\n", strerror(errno));
-		return -1;
-	}
-
-	for (i = 0; i < ns_msg_count(handle, ns_s_an); i++) {
-		if (ns_parserr(&handle, ns_s_an, i, &rr) != 0) {
-			//fprintf(stderr, "Unable to parse resource record: %s\n", strerror(errno));
-			return -1;
-		}
-
-		rdlen = ns_rr_rdlen(rr);
-
-		switch (ns_rr_type(rr))
-		{
-		case ns_t_a:
-			if (rdlen != 4) {
-				//fprintf(stderr, "Unexpected A record length\n");
-				return -1;
-			}
-			inet_ntop(AF_INET, ns_rr_rdata(rr), astr, sizeof(astr));
-			printf("Name:\t%s\nAddress: %s\n", ns_rr_name(rr), astr);
-			break;
-
-#if ENABLE_FEATURE_IPV6
-		case ns_t_aaaa:
-			if (rdlen != 16) {
-				//fprintf(stderr, "Unexpected AAAA record length\n");
-				return -1;
-			}
-			inet_ntop(AF_INET6, ns_rr_rdata(rr), astr, sizeof(astr));
-			printf("%s\thas AAAA address %s\n", ns_rr_name(rr), astr);
-			break;
-#endif
-
-		case ns_t_ns:
-			if (!format)
-				format = "%s\tnameserver = %s\n";
-			/* fall through */
-
-		case ns_t_cname:
-			if (!format)
-				format = "%s\tcanonical name = %s\n";
-			/* fall through */
-
-		case ns_t_ptr:
-			if (!format)
-				format = "%s\tname = %s\n";
-			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-				ns_rr_rdata(rr), dname, sizeof(dname)) < 0) {
-				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
-				return -1;
-			}
-			printf(format, ns_rr_name(rr), dname);
-			break;
-
-		case ns_t_mx:
-			if (rdlen < 2) {
-				fprintf(stderr, "MX record too short\n");
-				return -1;
-			}
-			n = ns_get16(ns_rr_rdata(rr));
-			if (ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-				ns_rr_rdata(rr) + 2, dname, sizeof(dname)) < 0) {
-				//fprintf(stderr, "Cannot uncompress MX domain: %s\n", strerror(errno));
-				return -1;
-			}
-			printf("%s\tmail exchanger = %d %s\n", ns_rr_name(rr), n, dname);
-			break;
-
-		case ns_t_txt:
-			if (rdlen < 1) {
-				//fprintf(stderr, "TXT record too short\n");
-				return -1;
-			}
-			n = *(unsigned char *)ns_rr_rdata(rr);
-			if (n > 0) {
-				memset(dname, 0, sizeof(dname));
-				memcpy(dname, ns_rr_rdata(rr) + 1, n);
-				printf("%s\ttext = \"%s\"\n", ns_rr_name(rr), dname);
-			}
-			break;
-
-		case ns_t_soa:
-			if (rdlen < 20) {
-				//fprintf(stderr, "SOA record too short\n");
-				return -1;
-			}
-
-			printf("%s\n", ns_rr_name(rr));
-
-			cp = ns_rr_rdata(rr);
-			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-			                       cp, dname, sizeof(dname));
-
-			if (n < 0) {
-				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
-				return -1;
-			}
-
-			printf("\torigin = %s\n", dname);
-			cp += n;
-
-			n = ns_name_uncompress(ns_msg_base(handle), ns_msg_end(handle),
-			                       cp, dname, sizeof(dname));
-
-			if (n < 0) {
-				//fprintf(stderr, "Unable to uncompress domain: %s\n", strerror(errno));
-				return -1;
-			}
-
-			printf("\tmail addr = %s\n", dname);
-			cp += n;
-
-			printf("\tserial = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\trefresh = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\tretry = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\texpire = %lu\n", ns_get32(cp));
-			cp += 4;
-
-			printf("\tminimum = %lu\n", ns_get32(cp));
-			break;
-
-		default:
-			break;
-		}
-	}
-
-	return i;
-}
-
-static int parse_nsaddr(const char *addrstr, len_and_sockaddr *lsa)
-{
-	char *eptr, *hash, ifname[IFNAMSIZ];
-	unsigned int port = default_port;
-	unsigned int scope = 0;
-
-	hash = strchr(addrstr, '#');
-
-	if (hash) {
-		*hash++ = '\0';
-		port = strtoul(hash, &eptr, 10);
-
-		if (eptr == hash || *eptr != '\0' || port > 65535) {
-			errno = EINVAL;
-			return -1;
-		}
-	}
-
-	hash = strchr(addrstr, '%');
-
-	if (hash) {
-		for (eptr = ++hash; *eptr != '\0' && *eptr != '#'; eptr++) {
-			if ((eptr - hash) >= IFNAMSIZ) {
-				errno = ENODEV;
-				return -1;
-			}
-
-			ifname[eptr - hash] = *eptr;
-		}
-
-		ifname[eptr - hash] = '\0';
-		scope = if_nametoindex(ifname);
-
-		if (scope == 0) {
-			errno = ENODEV;
-			return -1;
-		}
-	}
-
-#if ENABLE_FEATURE_IPV6
-	if (inet_pton(AF_INET6, addrstr, &lsa->u.sin6.sin6_addr)) {
-		lsa->u.sin6.sin6_family = AF_INET6;
-		lsa->u.sin6.sin6_port = htons(port);
-		lsa->u.sin6.sin6_scope_id = scope;
-		lsa->len = sizeof(lsa->u.sin6);
-		return 0;
-	}
-#endif
-
-	if (!scope && inet_pton(AF_INET, addrstr, &lsa->u.sin.sin_addr)) {
-		lsa->u.sin.sin_family = AF_INET;
-		lsa->u.sin.sin_port = htons(port);
-		lsa->len = sizeof(lsa->u.sin);
-		return 0;
-	}
-
-	errno = EINVAL;
-	return -1;
-}
-
-static unsigned long mtime(void)
-{
-	struct timespec ts;
-	clock_gettime(CLOCK_REALTIME, &ts);
-	return (unsigned long)ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
-}
-
-#if ENABLE_FEATURE_IPV6
-static void to_v4_mapped(len_and_sockaddr *a)
-{
-	if (a->u.sa.sa_family != AF_INET)
-		return;
-
-	memcpy(a->u.sin6.sin6_addr.s6_addr + 12,
-	       &a->u.sin.sin_addr, 4);
-
-	memcpy(a->u.sin6.sin6_addr.s6_addr,
-	       "\0\0\0\0\0\0\0\0\0\0\xff\xff", 12);
-
-	a->u.sin6.sin6_family = AF_INET6;
-	a->u.sin6.sin6_flowinfo = 0;
-	a->u.sin6.sin6_scope_id = 0;
-	a->len = sizeof(a->u.sin6);
-}
-#endif
-
-
-/*
- * Function logic borrowed & modified from musl libc, res_msend.c
- */
-
-static int send_queries(struct ns *ns, int n_ns, struct query *queries, int n_queries)
-{
-	int fd;
-	int timeout = default_timeout * 1000, retry_interval, servfail_retry = 0;
-	len_and_sockaddr from = { };
-#if ENABLE_FEATURE_IPV6
-	int one = 1;
-#endif
-	int recvlen = 0;
-	int n_replies = 0;
-	struct pollfd pfd;
-	unsigned long t0, t1, t2;
-	int nn, qn, next_query = 0;
-
-	from.u.sa.sa_family = AF_INET;
-	from.len = sizeof(from.u.sin);
-
-#if ENABLE_FEATURE_IPV6
-	for (nn = 0; nn < n_ns; nn++) {
-		if (ns[nn].addr.u.sa.sa_family == AF_INET6) {
-			from.u.sa.sa_family = AF_INET6;
-			from.len = sizeof(from.u.sin6);
-			break;
-		}
-	}
-#endif
-
-	/* Get local address and open/bind a socket */
-	fd = socket(from.u.sa.sa_family, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
-
-#if ENABLE_FEATURE_IPV6
-	/* Handle case where system lacks IPv6 support */
-	if (fd < 0 && from.u.sa.sa_family == AF_INET6 && errno == EAFNOSUPPORT) {
-		fd = socket(AF_INET, SOCK_DGRAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0);
-		from.u.sa.sa_family = AF_INET;
-	}
-#endif
-
-	if (fd < 0)
-		return -1;
-
-	if (bind(fd, &from.u.sa, from.len) < 0) {
-		close(fd);
-		return -1;
-	}
-
-#if ENABLE_FEATURE_IPV6
-	/* Convert any IPv4 addresses in a mixed environment to v4-mapped */
-	if (from.u.sa.sa_family == AF_INET6) {
-		setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one));
-
-		for (nn = 0; nn < n_ns; nn++)
-			to_v4_mapped(&ns[nn].addr);
-	}
-#endif
-
-	pfd.fd = fd;
-	pfd.events = POLLIN;
-	retry_interval = timeout / default_retry;
-	t0 = t2 = mtime();
-	t1 = t2 - retry_interval;
-
-	for (; t2 - t0 < timeout; t2 = mtime()) {
-		if (t2 - t1 >= retry_interval) {
-			for (qn = 0; qn < n_queries; qn++) {
-				if (queries[qn].rlen)
-					continue;
-
-				for (nn = 0; nn < n_ns; nn++) {
-					sendto(fd, queries[qn].query, queries[qn].qlen,
-					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
-				}
-			}
-
-			t1 = t2;
-			servfail_retry = 2 * n_queries;
-		}
-
-		/* Wait for a response, or until time to retry */
-		if (poll(&pfd, 1, t1+retry_interval-t2) <= 0)
-			continue;
-
-		while (1) {
-			recvlen = recvfrom(fd, queries[next_query].reply,
-			                   sizeof(queries[next_query].reply), 0,
-			                   &from.u.sa, &from.len);
-
-			/* read error */
-			if (recvlen < 0)
-				break;
-
-			/* Ignore non-identifiable packets */
-			if (recvlen < 4)
-				continue;
-
-			/* Ignore replies from addresses we didn't send to */
-			for (nn = 0; nn < n_ns; nn++)
-				if (memcmp(&from.u.sa, &ns[nn].addr.u.sa, from.len) == 0)
-					break;
-
-			if (nn >= n_ns)
-				continue;
-
-			/* Find which query this answer goes with, if any */
-			for (qn = next_query; qn < n_queries; qn++)
-				if (!memcmp(queries[next_query].reply, queries[qn].query, 2))
-					break;
-
-			if (qn >= n_queries || queries[qn].rlen)
-				continue;
-
-			queries[qn].rcode = queries[next_query].reply[3] & 15;
-			queries[qn].latency = mtime() - t0;
-			queries[qn].n_ns = nn;
-
-			ns[nn].replies++;
-
-			/* Only accept positive or negative responses;
-			 * retry immediately on server failure, and ignore
-			 * all other codes such as refusal. */
-			switch (queries[qn].rcode) {
-			case 0:
-			case 3:
-				break;
-
-			case 2:
-				if (servfail_retry && servfail_retry--) {
-					ns[nn].failures++;
-					sendto(fd, queries[qn].query, queries[qn].qlen,
-					       MSG_NOSIGNAL, &ns[nn].addr.u.sa, ns[nn].addr.len);
-				}
-				/* fall through */
-
-			default:
-				continue;
-			}
-
-			/* Store answer */
-			n_replies++;
-
-			queries[qn].rlen = recvlen;
-
-			if (qn == next_query) {
-				while (next_query < n_queries) {
-					if (!queries[next_query].rlen)
-						break;
-
-					next_query++;
-				}
-			}
-			else {
-				memcpy(queries[qn].reply, queries[next_query].reply, recvlen);
-			}
-
-			if (next_query >= n_queries)
-				return n_replies;
-		}
-	}
-
-	return n_replies;
-}
-
-static struct ns *add_ns(struct ns **ns, int *n_ns, const char *addr)
-{
-	char portstr[sizeof("65535")], *p;
-	len_and_sockaddr a = { };
-	struct ns *tmp;
-	struct addrinfo *ai, *aip, hints = {
-		.ai_flags = AI_NUMERICSERV,
-		.ai_socktype = SOCK_DGRAM
-	};
-
-	if (parse_nsaddr(addr, &a)) {
-		/* Maybe we got a domain name, attempt to resolve it using the standard
-		 * resolver routines */
-
-		p = strchr(addr, '#');
-		snprintf(portstr, sizeof(portstr), "%hu",
-		         (unsigned short)(p ? strtoul(p, NULL, 10) : default_port));
-
-		if (!getaddrinfo(addr, portstr, &hints, &ai)) {
-			for (aip = ai; aip; aip = aip->ai_next) {
-				if (aip->ai_addr->sa_family != AF_INET &&
-				    aip->ai_addr->sa_family != AF_INET6)
-					continue;
-
-#if ! ENABLE_FEATURE_IPV6
-				if (aip->ai_addr->sa_family != AF_INET)
-					continue;
-#endif
-
-				tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
-
-				if (!tmp)
-					return NULL;
-
-				*ns = tmp;
-
-				(*ns)[*n_ns].name = addr;
-				(*ns)[*n_ns].replies = 0;
-				(*ns)[*n_ns].failures = 0;
-				(*ns)[*n_ns].addr.len = aip->ai_addrlen;
-
-				memcpy(&(*ns)[*n_ns].addr.u.sa, aip->ai_addr, aip->ai_addrlen);
-
-				(*n_ns)++;
-			}
-
-			freeaddrinfo(ai);
-
-			return &(*ns)[*n_ns];
-		}
-
-		return NULL;
-	}
-
-	tmp = realloc(*ns, sizeof(**ns) * (*n_ns + 1));
-
-	if (!tmp)
-		return NULL;
-
-	*ns = tmp;
-
-	(*ns)[*n_ns].addr = a;
-	(*ns)[*n_ns].name = addr;
-	(*ns)[*n_ns].replies = 0;
-	(*ns)[*n_ns].failures = 0;
-
-	return &(*ns)[(*n_ns)++];
-}
-
-static struct query *add_query(struct query **queries, int *n_queries,
-                               int type, const char *dname)
-{
-	struct query *tmp;
-	ssize_t qlen;
-
-	tmp = realloc(*queries, sizeof(**queries) * (*n_queries + 1));
-
-	if (!tmp)
-		return NULL;
-
-	memset(&tmp[*n_queries], 0, sizeof(*tmp));
-
-	qlen = res_mkquery(QUERY, dname, C_IN, type, NULL, 0, NULL,
-	                   tmp[*n_queries].query, sizeof(tmp[*n_queries].query));
-
-	tmp[*n_queries].qlen = qlen;
-	tmp[*n_queries].name = dname;
-	*queries = tmp;
-
-	return &tmp[(*n_queries)++];
-}
-
-int main(int argc, char **argv)
-{
-	int rc = 1;
-	struct ns *ns = NULL;
-	struct query *queries = NULL;
-	int n_ns = 0, n_queries = 0;
-	int c = 0;
-
-	char *url = "telecominfraproject.com";
-	char *server = "127.0.0.1";
-	int v6 = 0;
-
-	while (1) {
-		int option = getopt(argc, argv, "u:s:i:6");
-
-		if (option == -1)
-			break;
-
-		switch (option) {
-		case '6':
-			v6 = 1;
-			break;
-		case 'u':
-			url = optarg;
-			break;
-		case 's':
-			server = optarg;
-			break;
-		default:
-		case 'h':
-			printf("Usage: dnsprobe OPTIONS\n"
-			       "  -6 - use ipv6\n"
-			       "  -u <url>\n"
-			       "  -s <server>\n");
-			return -1;
-		}
-	}
-
-	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "dnsprobe");
-
-	ULOG_INFO("attempting to probe dns - %s %s %s\n",
-		url, server, v6 ? "ipv6" : "");
-
-
-	add_query(&queries, &n_queries, v6 ? T_AAAA : T_A, url);
-
-	add_ns(&ns, &n_ns, server);
-
-	rc = send_queries(&ns[0], 1, queries, n_queries);
-	if (rc <= 0) {
-		fprintf(stderr, "Failed to send queries: %s\n", strerror(errno));
-		rc = -1;
-		goto out;
-	}
-
-	if (queries[0].rcode != 0) {
-		printf("** server can't find %s: %s\n", queries[0].name,
-		rcodes[queries[0].rcode]);
-		goto out;
-	}
-
-	if (queries[0].rlen) {
-		c = parse_reply(queries[0].reply, queries[0].rlen, NULL);
-	}
-
-	if (c == 0)
-		printf("*** Can't find %s: No answer\n", queries[0].name);
-	else if (c < 0)
-		printf("*** Can't find %s: Parse error\n", queries[0].name);
-	else
-		rc = 0;
-
-out:
-	if (n_ns)
-		free(ns);
-
-	if (n_queries)
-		free(queries);
-
-	return rc;
-}

feeds/ucentral/ucentral-tools/src/firstcontact.c

@@ -1,100 +0,0 @@
-#define _GNU_SOURCE
-#include <stdio.h>
-#include <getopt.h>
-
-#include <curl/curl.h>
-
-#include <libubox/ulog.h>
-
-static const char *file_cert = "/etc/open-wifi/client.pem";
-static const char *file_key  = "/etc/open-wifi/client_dec.key";
-static const char *file_json = "/etc/open-wifi/redirector.json";
-static const char *file_dbg  = "/tmp/firstcontact.hdr";
-
-int main(int argc, char **argv)
-{
-	FILE *fp_json;
-	FILE *fp_dbg;
-	CURLcode res;
-	CURL *curl;
-	char *devid = NULL;
-	char *url;
-
-	while (1) {
-		int option = getopt(argc, argv, "k:c:o:hi:");
-
-		if (option == -1)
-			break;
-
-		switch (option) {
-		case 'k':
-			file_key = optarg;
-			break;
-		case 'c':
-			file_cert = optarg;
-			break;
-		case 'o':
-			file_json = optarg;
-			break;
-		case 'i':
-			devid = optarg;
-			break;
-		default:
-		case 'h':
-			printf("Usage: firstcontact OPTIONS\n"
-			       "  -k <keyfile>\n"
-			       "  -c <certfile>\n"
-			       "  -o <outfile>\n"
-			       "  -i <devid>\n");
-			return -1;
-		}
-	}
-
-	if (!devid) {
-		fprintf(stderr, "missing devid\n");
-		return -1;
-	}
-
-	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "firstcontact");
-	ULOG_INFO("attempting first contact\n");
-
-	fp_dbg = fopen(file_dbg, "wb");
-	fp_json = fopen(file_json, "wb");
-	if (!fp_json) {
-		ULOG_ERR("failed to create %s\n", file_json);
-		return -1;
-	}
-
-	curl_global_init(CURL_GLOBAL_DEFAULT);
-	curl = curl_easy_init();
-	if (!curl) {
-		ULOG_ERR("curl_easy_init failed\n");
-		return -1;
-	}
-
-	if (asprintf(&url, "https://clientauth.demo.one.digicert.com/iot/api/v2/device/%s", devid) < 0) {
-		ULOG_ERR("failed to assemble url\n");
-		return -1;
-	}
-
-	curl_easy_setopt(curl, CURLOPT_URL, url);
-	curl_easy_setopt(curl, CURLOPT_WRITEDATA, fp_json);
-	curl_easy_setopt(curl, CURLOPT_HEADERDATA, fp_dbg);
-	curl_easy_setopt(curl, CURLOPT_SSLCERTTYPE, "PEM");
-	curl_easy_setopt(curl, CURLOPT_SSLCERT, file_cert);
-	curl_easy_setopt(curl, CURLOPT_SSLKEYTYPE, "PEM");
-	curl_easy_setopt(curl, CURLOPT_SSLKEY, file_key);
-	curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
-
-	res = curl_easy_perform(curl);
-	if (res != CURLE_OK)
-		ULOG_ERR("curl_easy_perform() failed: %s\n", curl_easy_strerror(res));
-	else
-		ULOG_INFO("downloaded first contact data\n");
-	curl_easy_cleanup(curl);
-	curl_global_cleanup();
-
-	ulog_close();
-
-	return (res != CURLE_OK);
-}

feeds/ucentral/ucentral-tools/src/ip-collide.c

@@ -1,86 +0,0 @@
-#include <arpa/inet.h>
-#include <net/if.h>
-
-#include <libubox/list.h>
-#include <libubox/ulog.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-struct route {
-	struct list_head list;
-	char devname[64];
-	uint32_t domain;
-	uint32_t mask;
-};
-
-static struct list_head routes = LIST_HEAD_INIT(routes);
-
-static int parse_routes(void)
-{
-	FILE *fp = fopen("/proc/net/route", "r");
-	int flgs, ref, use, metric, mtu, win, ir;
-	struct route *route;
-	unsigned long g;
-	int r;
-
-	r = fscanf(fp, "%*[^\n]\n");
-	if (r < 0) {
-		fprintf(stderr, "failed to parse routes\n");
-		return -1;
-	}
-	while (1) {
-		route = malloc(sizeof(*route));
-		if (!route)
-			break;
-		memset(route, 0, sizeof(*route));
-		r = fscanf(fp, "%63s%x%lx%X%d%d%d%x%d%d%d\n",
-			route->devname, &route->domain, &g, &flgs, &ref, &use, &metric, &route->mask,
-			&mtu, &win, &ir);
-		if (r != 11 && (r < 0) && feof(fp))
-			break;
-		list_add(&route->list, &routes);
-		printf("1 %s %x %x\n", route->devname, ntohl(route->domain), ntohl(route->mask));
-	}
-
-	fclose(fp);
-
-	return 0;
-}
-
-static int find_collisions(void)
-{
-	struct route *route;
-
-	list_for_each_entry(route, &routes, list) {
-		struct route *compare;
-
-		if (!route->domain || !route->mask)
-			continue;
-		list_for_each_entry(compare, &routes, list) {
-			if (!compare->domain || !compare->mask)
-				continue;
-			if (compare == route)
-				continue;
-			if (((route->domain & route->mask) == (compare->domain & route->mask)) ||
-			    ((route->domain & compare->mask) == (compare->domain & compare->mask))) {
-				ULOG_ERR("collision detected\n");
-				return 1;
-			}
-		}
-	}
-	ULOG_INFO("no collision detected\n");
-	return 0;
-}
-
-int main(int argc, char **argv)
-{
-	ulog_open(ULOG_SYSLOG | ULOG_STDIO, LOG_DAEMON, "ip-collide");
-
-	parse_routes();
-	if (!list_empty(&routes))
-		return find_collisions();
-
-	return 0;
-}

feeds/ucentral/ucentral-tools/src/radiusprobe.c

@@ -1,47 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <radcli/radcli.h>
-
-int
-main(int argc, char **argv)
-{
-	int result;
-	char username[128];
-	char passwd[AUTH_PASS_LEN + 1];
-	VALUE_PAIR *send, *received;
-	uint32_t service;
-	rc_handle *rh;
-
-	/* Not needed if you already used openlog() */
-	rc_openlog("radiusprobe");
-
-	if ((rh = rc_read_config("/tmp/radius.conf")) == NULL)
-		return ERROR_RC;
-
-	strcpy(username, "healthcheck");
-	strcpy(passwd, "uCentral");
-
-	send = NULL;
-
-	if (rc_avpair_add(rh, &send, PW_USER_NAME, username, -1, 0) == NULL)
-		return ERROR_RC;
-
-	if (rc_avpair_add(rh, &send, PW_USER_PASSWORD, passwd, -1, 0) == NULL)
-		return ERROR_RC;
-
-	service = PW_AUTHENTICATE_ONLY;
-	if (rc_avpair_add(rh, &send, PW_SERVICE_TYPE, &service, -1, 0) == NULL)
-		return ERROR_RC;
-
-	result = rc_auth(rh, 0, send, &received, NULL);
-
-	if (result == OK_RC || result == REJECT_RC) {
-		fprintf(stderr, "RADIUS server OK\n");
-		result = 0;
-	} else {
-		fprintf(stderr, "RADIUS server failure\n");
-		result = -1;
-	}
-
-	return result;
-}

feeds/ucentral/udhcpinject/files/etc/config/dhcpinject

@@ -5,6 +5,3 @@
 #   list ssid 'EAP101-ERICHI'
 #   list ssid 'EAP101-AKIHO'
 #   list ssid 'EAP101-DAMAYU'
-#
-# config dhcpinject 'dhcpinject'
-#   option iface_count '6'

feeds/ucentral/udhcpinject/files/etc/init.d/dhcpinject

@@ -9,9 +9,9 @@ SERVICE_NAME="dhcpinject"
 PROG=/usr/bin/udhcpinject
 
 start_service() {
+    local ssid_list=""
     local ssids=""
     local ports=""
-    local ifaces=""
 
     # Function to process each ssid
     append_ssid() {
@@ -40,9 +40,6 @@ start_service() {
 
     # Get the list of ports
     config_list_foreach uplink port append_port
-
-    # Get the iface_count
-    config_get ifaces dhcpinject iface_count
     
     # Fallback to eth0 if no ports are specified
     if [ -z "$ports" ]; then
@@ -50,11 +47,11 @@ start_service() {
     fi
 
     # Optional: Log or echo for debugging
-    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports, IFACEs=$ifaces"
+    logger -t dhcp_inject "Generated SSIDs=$ssids, Uplink=$ports"
 
     procd_open_instance "$SERVICE_NAME"
     procd_set_param command $PROG
-    procd_set_param env SSIDs="$ssids" PORTs="$ports" IFACEs="$ifaces"
+    procd_set_param env SSIDs="$ssids" PORTs="$ports"
     procd_set_param respawn 3600 10 10
     procd_set_param file /etc/config/dhcpinject
     procd_set_param reload_signal SIGHUP

feeds/ucentral/udhcpinject/src/udhcpinject.c

@@ -26,7 +26,6 @@ struct iface_info *iface_map = NULL;
 static struct port_info *ports = NULL;
 int iface_count = 0;
 int port_count = 0;
-int total_iface = 0;
 static pcap_t *handle = NULL;
 static char *provided_ssids = NULL;
 static char *provided_ports = NULL;
@@ -193,11 +192,6 @@ int parse_ssids(const char *ssids) {
         return -1;
     }
 
-    if (iface_count != total_iface) {
-        syslog(LOG_ERR, "Expect %d but only %d interfaces were found.\n", total_iface, iface_count);
-        return -1;
-    }
-
     syslog(LOG_INFO, "Found %d matching interfaces\n", iface_count);
     return 0;
 }
@@ -316,6 +310,7 @@ void signal_handler(int sig) {
         exit(0);
     } else if (sig == SIGHUP) {
         syslog(LOG_INFO, "Received reload signal, reconfiguring...\n");
+        sleep(5);
         // Clean up existing resources
         cleanup_tc();
         
@@ -566,19 +561,7 @@ int main(int argc, char *argv[]) {
     signal(SIGTERM, signal_handler);
     signal(SIGHUP, signal_handler);
 
-    // Read IFACEs from environment variable
-    char *iface_env = getenv("IFACEs");
-    if (!iface_env) {
-        syslog(LOG_ERR, "No IFACEs provided. Exiting...\n");
-        cleanup();
-        return 1;
-    }
-    total_iface = atoi(iface_env);
-    if (total_iface <= 0) {
-        syslog(LOG_ERR, "Invalid IFACEs value: %s. Exiting...\n", iface_env);
-        cleanup();
-        return 1;
-    }
+    sleep(5);
 
     provided_ssids = getenv("SSIDs");
     syslog(LOG_INFO, "Provided SSIDs: %s\n", provided_ssids);
@@ -635,4 +618,4 @@ int main(int argc, char *argv[]) {
 
     cleanup();
     return 0;
-}
+}

profiles/cig_wf189.yml

@@ -12,4 +12,3 @@ include:
 packages:
   - ipq53xx
   - ftm
-  - qca-ssdk-shell

profiles/cig_wf189h.yml

@@ -1,14 +0,0 @@
----
-profile: cig_wf189h
-target: ipq53xx
-subtarget: generic
-description: Build image for the CIG WF189h
-image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-cig_wf189h-squashfs-sysupgrade.tar
-feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-include:
-  - ucentral-ap
-packages:
-  - ipq53xx
-  - qca-ssdk-shell

profiles/sercomm_ap72tip-v4.yml

@@ -1,16 +0,0 @@
----
-profile: sercomm_ap72tip-v4
-target: ipq53xx
-subtarget: generic
-description: Build image for the Sercomm AP72TIP-v4
-image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-v4-squashfs-sysupgrade.tar
-feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-include:
-  - ucentral-ap
-packages:
-  - ipq53xx
-  - qca-ssdk-shell
-diffconfig: |
-  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sercomm_ap72tip.yml

@@ -2,14 +2,14 @@
 profile: sercomm_ap72tip
 target: ipq53xx
 subtarget: generic
-description: Build image for the Sercomm AP72TIP
+description: Build image for the Sercomm AP72 TIP
 image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-sercomm_ap72tip-squashfs-sysupgrade.tar
 feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-include:
-  - ucentral-ap
+  - name: ipq95xx
+    path: ../../feeds/ipq95xx
 packages:
   - ipq53xx
+include:
+  - ucentral-ap
 diffconfig: |
   CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/sonicfi_rap650c.yml

@@ -1,15 +0,0 @@
----
-profile: sonicfi_rap650c
-target: ipq807x
-subtarget: generic
-description: Build image for the SonicFi RAP650C
-image: bin/targets/ipq807x/generic/openwrt-ipq807x-sonicfi_rap650c-squashfs-sysupgrade.tar
-feeds:
-  - name: ipq807x
-    path: ../../feeds/ipq807x_v5.4
-include:
-  - ucentral-ap
-packages:
-  - ipq807x
-diffconfig: |
-  CONFIG_KERNEL_IPQ_MEM_PROFILE=0

profiles/ucentral-ap.yml

@@ -45,7 +45,6 @@ packages:
   - ucentral-schema
   - ucentral-state
   - ucentral-tools
-  - udhcpinject
   - udhcprelay
   - ufp
   - ugps