qca-wifi-7: hostapd.sh: add missed functionality from ipq807x_v5.4

The main reason was adding missed functionality for Radius
configuration which caused rejecting WiFi clients on
authentication level.

Still some changes not included:
* AFC,
* hs20_release,
* multiple_bssid,
* he_co_locate

Fixes: WIFI-14459

Signed-off-by: Marek Kwaczynski <marek@shasta.cloud>

feeds/qca-wifi-7/ath12k-wifi/Makefile

@@ -53,11 +53,6 @@ $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for RAP750W_311a
 endef
 
-define Package/ath12k-wifi-cig-wf189h
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for WF189H
-endef
-
 define Package/ath12k-wifi-cig-wf189w
 $(call Package/ath12k-wifi-default)
     TITLE:=board-2.bin for WF189W
@@ -101,18 +96,8 @@ define Package/ath12k-wifi-cig-wf189w/install
 	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
 endef
 
-
-define Package/ath12k-wifi-cig-wf189h/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN6432/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.189h.IPQ5332 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./board-2.bin.189h.QCN6432 $(1)/lib/firmware/ath12k/QCN6432/hw1.0/board-2.bin
-	$(INSTALL_DATA) ./ipq5332_qcn6432.regdb $(1)/lib/firmware/ath12k/QCN6432/hw1.0/regdb.bin
-endef
-
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
 $(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap7110c-341x))
 $(eval $(call BuildPackage,ath12k-wifi-sonicfi-rap750w-311a))
 $(eval $(call BuildPackage,ath12k-wifi-cig-wf189w))
-$(eval $(call BuildPackage,ath12k-wifi-cig-wf189h))

feeds/qca-wifi-7/hostapd/files/hostapd.sh

@@ -126,12 +126,15 @@ hostapd_common_add_device_config() {
 	config_add_int maxassoc
 	config_add_int reg_power_type
 	config_add_boolean stationary_ap
+	config_add_boolean maxassoc_ignore_probe
 
 	config_add_string acs_chan_bias
+	config_add_boolean acs_exclude_dfs
 	config_add_array hostapd_options
 
 	config_add_int airtime_mode
 	config_add_int mbssid
+	config_add_boolean rnr_beacon ema
 
 	hostapd_add_log_config
 }
@@ -142,10 +145,11 @@ hostapd_prepare_device_config() {
 
 	local base_cfg=
 
-	json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \
+	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
 		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
-		mbssid:0 band reg_power_type stationary_ap
+		rnr_beacon mbssid:0 band reg_power_type stationary_ap acs_exclude_dfs\
+		maxassoc_ignore_probe band
 
 	hostapd_set_log_options base_cfg
 
@@ -155,6 +159,9 @@ hostapd_prepare_device_config() {
 	set_default legacy_rates 0
 	set_default airtime_mode 0
 	set_default cell_density 0
+	set_default rnr_beacon 0
+	set_default ema 0
+	set_default acs_exclude_dfs 0
 
 	[ -n "$country" ] && {
 		append base_cfg "country_code=$country" "$N"
@@ -244,8 +251,14 @@ hostapd_prepare_device_config() {
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 	append base_cfg "beacon_int=$beacon_int" "$N"
 	[ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N"
+	append base_cfg "dtim_period=$dtim_period" "$N"
 	[ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N"
 	[ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N"
+	[ "$maxassoc_ignore_probe" -gt 0 ] && append base_cfg "no_probe_resp_if_max_sta=1" "$N"
+	[ "$rnr_beacon" -gt 0 ] && append base_cfg "rnr_beacon=$rnr_beacon" "$N"
+	[ "$ema" -gt 0 ] && append base_cfg "ema=$ema" "$N"
+	[ "$acs_exclude_dfs" -gt 0 ] && append base_cfg "acs_exclude_dfs=$acs_exclude_dfs" "$N"
+
 	[ "$mbssid" -gt 0 ] && [ "$mbssid" -le 2 ] && append base_cfg "mbssid=$mbssid" "$N"
 
 	[ "$band" = "6g" ] && {
@@ -287,15 +300,24 @@ hostapd_common_add_bss_config() {
 	config_add_int ieee80211w
 	config_add_int eapol_version
 
-	config_add_array auth_server acct_server
-	config_add_string 'server:host'
+	config_add_string 'auth_server:host' 'server:host'
 	config_add_string auth_secret key
 	config_add_int 'auth_port:port' 'port:port'
 
+	config_add_string acct_server
 	config_add_string acct_secret
 	config_add_int acct_port
+
+	config_add_string acct_server_secondary
+	config_add_string acct_secret_secondary
+	config_add_int acct_port_secondary
+
 	config_add_int acct_interval
 
+	config_add_string auth_server_secondary
+	config_add_string auth_secret_secondary
+	config_add_int auth_port_secondary
+
 	config_add_int bss_load_update_period chan_util_avg_period
 
 	config_add_string dae_client
@@ -339,8 +361,8 @@ hostapd_common_add_bss_config() {
 	config_add_string lci civic
 
 	config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
-	config_add_int r0_key_lifetime reassociation_deadline
-	config_add_string mobility_domain r1_key_holder
+	config_add_int r0_key_lifetime reassociation_deadline ft_l2_refresh
+	config_add_string mobility_domain r1_key_holder ft_key
 	config_add_array r0kh r1kh
 
 	config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
@@ -391,14 +413,18 @@ hostapd_common_add_bss_config() {
 	config_add_array radius_auth_req_attr
 	config_add_array radius_acct_req_attr
 
-	config_add_int eap_server radius_server_auth_port
-	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients
+	config_add_int eap_server
+	config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id
 
 	config_add_boolean fils
 	config_add_string fils_dhcp
 
+	config_add_boolean ratelimit
 	config_add_int ocv
 
+	config_add_string uci_section
+	config_add_boolean dynamic_probe_resp
+
 	config_add_boolean apup
 	config_add_string apup_peer_ifname_prefix
 }
@@ -433,6 +459,7 @@ hostapd_set_psk() {
 	local ifname="$1"
 
 	rm -f /var/run/hostapd-${ifname}.psk
+	touch /var/run/hostapd-${ifname}.psk
 	for_each_station hostapd_set_psk_file ${ifname}
 }
 
@@ -549,18 +576,83 @@ append_airtime_sta_weight() {
 	[ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N"
 }
 
-append_auth_server() {
-	[ -n "$1" ] || return
-	append bss_conf "auth_server_addr=$1" "$N"
-	append bss_conf "auth_server_port=$auth_port" "$N"
-	[ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
-}
+append_radius_server() {
 
-append_acct_server() {
-	[ -n "$1" ] || return
-	append bss_conf "acct_server_addr=$1" "$N"
-	append bss_conf "acct_server_port=$acct_port" "$N"
-	[ -n "$acct_secret" ] && append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+	json_get_vars \
+		auth_server auth_secret auth_port \
+		auth_server_secondary auth_secret_secondary auth_port_secondary \
+		dae_client dae_secret dae_port \
+		dynamic_ownip ownip radius_client_addr \
+		eap_reauth_period request_cui \
+		erp_domain mobility_domain \
+		fils_realm fils_dhcp
+
+	set_default dynamic_ownip 1
+
+	# legacy compatibility
+	[ -n "$auth_server" ] || json_get_var auth_server server
+	[ -n "$auth_port" ] || json_get_var auth_port port
+	[ -n "$auth_secret" ] || json_get_var auth_secret key
+
+	[ "$fils" -gt 0 ] && {
+		set_default erp_domain "$mobility_domain"
+		set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
+		set_default fils_realm "$erp_domain"
+
+		append bss_conf "erp_send_reauth_start=1" "$N"
+		append bss_conf "erp_domain=$erp_domain" "$N"
+		append bss_conf "fils_realm=$fils_realm" "$N"
+		append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
+
+		[ "$fils_dhcp" = "*" ] && {
+			json_get_values network network
+			fils_dhcp=
+			for net in $network; do
+				fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
+				[ -n "$fils_dhcp" ] && break
+			done
+
+			[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
+				fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
+		}
+		[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
+	}
+
+	set_default auth_port 1812
+	set_default auth_port_secondary 1812
+	set_default dae_port 3799
+	set_default request_cui 0
+
+	[ "$eap_server" -eq 0  -a -n "$auth_server" ] && {
+		append bss_conf "auth_server_addr=$auth_server" "$N"
+		append bss_conf "auth_server_port=$auth_port" "$N"
+		append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
+	}
+
+	[ -n "$auth_server_secondary" ] && {
+		append bss_conf "auth_server_addr=$auth_server_secondary" "$N"
+		append bss_conf "auth_server_port=$auth_port_secondary" "$N"
+		[ -n "$auth_secret_secondary" ] && \
+			append bss_conf "auth_server_shared_secret=$auth_secret_secondary" "$N"
+	}
+
+	[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
+	[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
+
+	[ -n "$dae_client" -a -n "$dae_secret" ] && {
+		append bss_conf "radius_das_port=$dae_port" "$N"
+		append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
+	}
+	json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
+
+	if [ -n "$ownip" ]; then
+		append bss_conf "own_ip_addr=$ownip" "$N"
+	elif [ "$dynamic_ownip" -gt 0 ]; then
+		append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
+	fi
+
+	[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
+	[ "$macfilter" = radius ] && append bss_conf "macaddr_acl=2" "$N"
 }
 
 hostapd_set_bss_options() {
@@ -570,7 +662,7 @@ hostapd_set_bss_options() {
 
 	wireless_vif_parse_encryption
 
-	local bss_conf bss_md5sum ft_key
+	local bss_conf bss_md5sum
 	local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 
 	json_get_vars \
@@ -581,13 +673,14 @@ hostapd_set_bss_options() {
 		wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
 		macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
 		iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
-		acct_secret acct_port acct_interval \
+		acct_server acct_secret acct_port acct_interval \
+		acct_server_secondary acct_secret_secondary acct_port_secondary \
 		bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \
 		multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \
 		ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id radius_server_clients radius_server_auth_port \
-		vendor_elements fils ocv apup multi_psk
+		vendor_elements fils ocv apup uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -604,6 +697,7 @@ hostapd_set_bss_options() {
 	set_default tdls_prohibit 0
 	set_default eapol_version $((wpa & 1))
 	set_default acct_port 1813
+	set_default acct_port_secondary 1813
 	set_default bss_load_update_period 60
 	set_default chan_util_avg_period 600
 	set_default utf8_ssid 1
@@ -612,6 +706,7 @@ hostapd_set_bss_options() {
 	set_default airtime_bss_weight 0
 	set_default airtime_bss_limit 0
 	set_default eap_server 0
+	set_default dynamic_probe_resp 0
 	set_default apup 0
 
 	/usr/sbin/hostapd -vfils || fils=0
@@ -638,6 +733,7 @@ hostapd_set_bss_options() {
 	append bss_conf "preamble=$short_preamble" "$N"
 	append bss_conf "wmm_enabled=$wmm" "$N"
 	append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
+	append bss_conf "dynamic_probe_resp=$dynamic_probe_resp" "$N"
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
@@ -654,10 +750,22 @@ hostapd_set_bss_options() {
 
 	[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 
-	[ -n "$acct_interval" ] && \
-		append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
-	json_for_each_item append_acct_server acct_server
-	json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
+	[ -n "$acct_server" ] && {
+		append bss_conf "acct_server_addr=$acct_server" "$N"
+		append bss_conf "acct_server_port=$acct_port" "$N"
+		[ -n "$acct_secret" ] && \
+			append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
+		[ -n "$acct_interval" ] && \
+			append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
+		json_for_each_item append_radius_acct_req_attr radius_acct_req_attr
+	}
+
+	[ -n "$acct_server_secondary" ] && {
+		append bss_conf "acct_server_addr=$acct_server_secondary" "$N"
+		append bss_conf "acct_server_port=$acct_port_secondary" "$N"
+		[ -n "$acct_secret_secondary" ] && \
+			append bss_conf "acct_server_shared_secret=$acct_secret_secondary" "$N"
+	}
 
 	[ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N"
 
@@ -690,6 +798,8 @@ hostapd_set_bss_options() {
 			# Here we make the assumption that if we're in open mode
 			# with WPS enabled, we got to be in unconfigured state.
 			wps_not_configured=1
+			vlan_possible=1
+			append_radius_server
 		;;
 		psk|sae|psk-sae)
 			json_get_vars key wpa_psk_file
@@ -714,74 +824,15 @@ hostapd_set_bss_options() {
 			}
 			[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
 
+			append_radius_server
 			set_default dynamic_vlan 0
 			vlan_possible=1
 			wps_possible=1
 		;;
-		eap|eap2|eap-eap2|eap192)
-			json_get_vars \
-				auth_server auth_secret auth_port \
-				dae_client dae_secret dae_port \
-				dynamic_ownip ownip radius_client_addr \
-				eap_reauth_period request_cui \
-				erp_domain mobility_domain \
-				fils_realm fils_dhcp
-
+		eap|eap192|eap-eap2|eap2)
+			append_radius_server
 			# radius can provide VLAN ID for clients
 			vlan_possible=1
-
-			set_default dynamic_ownip 1
-
-			# legacy compatibility
-			[ -n "$auth_server" ] || json_get_var auth_server server
-			[ -n "$auth_port" ] || json_get_var auth_port port
-			[ -n "$auth_secret" ] || json_get_var auth_secret key
-
-			[ "$fils" -gt 0 ] && {
-				set_default erp_domain "$mobility_domain"
-				set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)"
-				set_default fils_realm "$erp_domain"
-
-				append bss_conf "erp_send_reauth_start=1" "$N"
-				append bss_conf "erp_domain=$erp_domain" "$N"
-				append bss_conf "fils_realm=$fils_realm" "$N"
-				append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N"
-
-				[ "$fils_dhcp" = "*" ] && {
-					json_get_values network network
-					fils_dhcp=
-					for net in $network; do
-						fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')"
-						[ -n "$fils_dhcp" ] && break
-					done
-
-					[ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \
-						fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)"
-				}
-				[ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N"
-			}
-
-			set_default auth_port 1812
-			set_default dae_port 3799
-			set_default request_cui 0
-
-			[ "$eap_server" -eq 0 ] && json_for_each_item append_auth_server auth_server
-			[ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N"
-			[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
-
-			[ -n "$dae_client" -a -n "$dae_secret" ] && {
-				append bss_conf "radius_das_port=$dae_port" "$N"
-				append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
-			}
-			json_for_each_item append_radius_auth_req_attr radius_auth_req_attr
-
-			if [ -n "$ownip" ]; then
-				append bss_conf "own_ip_addr=$ownip" "$N"
-			elif [ "$dynamic_ownip" -gt 0 ]; then
-				append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N"
-			fi
-
-			[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
 			append bss_conf "eapol_key_index_workaround=1" "$N"
 			append bss_conf "ieee8021x=1" "$N"
 
@@ -798,6 +849,7 @@ hostapd_set_bss_options() {
 			append bss_conf "wpa_psk_radius=3" "$N"
 			append_radius_server
 			vlan_possible=1
+		;;
 	esac
 
 	case "$auth_type" in
@@ -921,45 +973,42 @@ hostapd_set_bss_options() {
 		}
 	fi
 
-	json_get_vars ieee80211r
-	set_default ieee80211r 0
 	if [ "$wpa" -ge "1" ]; then
-		if [ "$fils" -gt 0 ]; then
-			json_get_vars fils_realm
-			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
-		fi
+		json_get_vars ieee80211r
+		set_default ieee80211r 0
 
-		append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
-
-		hostapd_append_wpa_key_mgmt
-		[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
-	fi
-
-	if [ "$wpa" -ge "2" ]; then
 		if [ "$ieee80211r" -gt "0" ]; then
-			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
+			json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline ft_l2_refresh
 
 			set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
-			set_default ft_over_ds 0
+			set_default ft_over_ds 1
+			set_default ft_l2_refresh 30
 			set_default reassociation_deadline 1000
+			skip_kh_setup=0
 
 			case "$auth_type" in
-				psk)
+				psk|psk-sae)
 					set_default ft_psk_generate_local 1
+					skip_kh_setup="$ft_psk_generate_local"
 				;;
 				*)
 					set_default ft_psk_generate_local 0
 				;;
 			esac
 
+			case "$auth_type" in
+				*sae*) skip_kh_setup=0;;
+			esac
+
 			[ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N"
 			append bss_conf "mobility_domain=$mobility_domain" "$N"
 			append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
 			append bss_conf "ft_over_ds=$ft_over_ds" "$N"
 			append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
+			[ -n "$ft_l2_refresh" ] && append bss_conf "ft_l2_refresh=$ft_l2_refresh" "$N"
 
-			if [ "$ft_psk_generate_local" -eq "0" ]; then
-				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
+			if [ "$skip_kh_setup" -eq "0" ]; then
+				json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push ft_key
 				json_get_values r0kh r0kh
 				json_get_values r1kh r1kh
 
@@ -971,12 +1020,15 @@ hostapd_set_bss_options() {
 						wireless_setup_vif_failed FT_KEY_CANT_BE_DERIVED
 						return 1
 					fi
-					ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'`
+					[ -z "$ft_key" ] && {
+						key=`echo -n "$mobility_domain/$auth_secret" | md5sum | awk '{print $1}'`
 
-					set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key"
-					set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key"
+						set_default r0kh "ff:ff:ff:ff:ff:ff,*,$key"
+						set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$key"
+					}
 				}
 
+				[ -n "$ft_key" ] && append bss_conf "ft_key=$ft_key" "$N"
 				[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 				append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 				append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
@@ -989,7 +1041,18 @@ hostapd_set_bss_options() {
 				done
 			fi
 		fi
+		if [ "$fils" -gt 0 ]; then
+			json_get_vars fils_realm
+			set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)"
+		fi
 
+		append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
+
+		hostapd_append_wpa_key_mgmt
+		[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
+	fi
+
+	if [ "$wpa" -ge "2" ]; then
 		if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 			set_default auth_cache 1
 			append bss_conf "rsn_preauth=1" "$N"
@@ -1189,6 +1252,8 @@ hostapd_set_bss_options() {
 		append bss_conf "per_sta_vif=$per_sta_vif" "$N"
 	fi
 
+	[ -n "$uci_section" ] && append bss_conf "uci_section=$uci_section" "$N"
+
 	if [ "$apup" -gt 0 ]; then
 		append bss_conf "apup=$apup" "$N"
 

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/01_leds

@@ -11,8 +11,10 @@ sercomm,ap72tip)
 	ucidef_set_led_netdev "wan_link" "wan_link" "green:phy" "eth0" "link"
 	ucidef_set_led_netdev "wan_act" "wan_act" "yellow:phy" "eth0" "rx tx"
 	;;
-sonicfi,rap7110c-341x|\
-sonicfi,rap750w-311a)
+sonicfi,rap7110c-341x)
+	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
+	;;
+cig,wf189w)
 	ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
 esac

feeds/qca-wifi-7/ipq53xx/base-files/etc/board.d/02_network

@@ -22,12 +22,7 @@ ipq53xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "" "eth0"
 		;;
 	cig,wf189w)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan" "1:lan"
-		;;
-	cig,wf189h)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch1" "0u@eth1" "3:lan" "2:lan"
+		ucidef_add_switch "switch1" "5u@eth0" "3:lan" "2:lan" "1:lan" "0u@eth1" "4:wan"
 		;;
 	esac
 }
@@ -37,7 +32,6 @@ qcom_setup_macs()
         local board="$1"
         case $board in
 	cig,wf189w|\
-	cig,wf189h|\
         cig,wf189)
 		mtd=$(find_mtd_chardev "0:APPSBLENV")
 		[ -z "$mtd" ] && return;
@@ -56,18 +50,13 @@ qcom_setup_macs()
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
-        sonicfi,rap7110c-341x)
+        sonicfi,rap7110c-341x|\
+        sonicfi,rap750w-311a)
                 wan_mac=$(cat /sys/class/net/eth0/address)
                 ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 1)
                 ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 2)
                 ucidef_set_wireless_macaddr_base 6g $(macaddr_add "$wan_mac" 3)
                 ;;
-        sonicfi,rap750w-311a)
-                wan_mac=$(cat /sys/class/net/eth0/address)
-                lan_mac=$(macaddr_add "$wan_mac" 1)
-                ucidef_set_wireless_macaddr_base 2g $(macaddr_add "$wan_mac" 2)
-                ucidef_set_wireless_macaddr_base 5g $(macaddr_add "$wan_mac" 3)
-                ;;
         *)
                 wan_mac=$(cat /sys/class/net/eth1/address)
                 lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/qca-wifi-7/ipq53xx/base-files/etc/hotplug.d/firmware/10-ath12k-caldata

@@ -28,7 +28,6 @@ case "$FIRMWARE" in
 ath12k/IPQ5332/hw1.0/caldata.bin)
 	case "$board" in
 	cig,wf189w|\
-	cig,wf189h|\
 	cig,wf189|\
 	edgecore,eap105|\
 	sercomm,ap72tip)
@@ -57,13 +56,12 @@ ath12k/QCN92XX/hw1.0/cal-pci-0001:01:00.0.bin)
 ath12k/QCN6432/hw1.0/caldata_1.bin)
 	case "$board" in
 	sonicfi,rap750w-311a)
-		caldata_extract "0:ART" 0x12800 0x18800
+		caldata_extract "0:ART" 0x26800 0x18800
 		;;
 	esac
 	;;
 ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi1@c0000000.bin)
 	case "$board" in
-	cig,wf189h|\
 	cig,wf189w)
 		caldata_extract "0:ART" 0x26800 0x20000
 		;;
@@ -71,7 +69,6 @@ ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi1@c0000000.bin)
 	;;
 ath12k/QCN6432/hw1.0/cal-ahb-soc@0:wifi2@c0000000.bin)
 	case "$board" in
-	cig,wf189h|\
 	cig,wf189w)
 		caldata_extract "0:ART" 0x58800 0x20000
 		;;

feeds/qca-wifi-7/ipq53xx/base-files/etc/init.d/smp-affinity

@@ -1,77 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
-	# For CE(assigned 2 core to copy engine)
-	# using 3 core will cause firmware crash due to bss channel survey timed out
-	i=0
-	cpu_mul=2
-	ce="ce"
-	ce1="ce_"
-	ce_name="$ce$i"
-	ce_name1="$ce1$i"
-	while [ $i -lt 15 ]
-	do
-		cpu=1
-		for irq_num in `grep -e "$ce_name" -e "$ce_name1" /proc/interrupts | cut -d ':' -f 1`
-		do
-			[ -n "$irq_num" ] && echo $cpu > /proc/irq/$irq_num/smp_affinity
-			cpu=$((cpu * cpu_mul))
-			if [ $cpu -gt 4 ] ; then cpu=1; fi
-		done
-	i=$((i+1))
-	ce_name="$ce$i"
-	ce_name1="$ce1$i"
-	done
-
-	#For IPQ5332 2G radio
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-destination-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring4' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring3' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring2' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-tx-completions-ring1' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2ost-exception' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'wbm2host-rx-release' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-	irq_affinity_num=`grep -E -m1 'reo2host-status' /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-	[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-
-	# 5G and 6G radio
-	# pci0 and pci1 for Wkiki (two radio and one radio split mode)
-	# pcic1 and pcic2 are for Pebble
-	for j in pci0 pci1 pcic1 pcic2; do
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_4 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_5 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_6 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_7 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_0 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 1 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_1 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_2 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 4 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_11 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_3 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 8 > /proc/irq/$irq_affinity_num/smp_affinity
-		irq_affinity_num=`grep -E -m1 "$j"_wlan_dp_8 /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$irq_affinity_num" ] && echo 2 > /proc/irq/$irq_affinity_num/smp_affinity
-        done
-}

feeds/qca-wifi-7/ipq53xx/base-files/lib/upgrade/platform.sh

@@ -87,7 +87,6 @@ platform_do_upgrade() {
 	board=$(board_name)
 	case $board in
 	cig,wf189w|\
-	cig,wf189h|\
 	cig,wf189)
 		if [ -f /proc/boot_info/bootconfig0/rootfs/upgradepartition ]; then
 			CI_UBIPART="$(cat /proc/boot_info/bootconfig0/rootfs/upgradepartition)"

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189.dts

@@ -23,10 +23,6 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
 	};
 
 	chosen {
@@ -182,26 +178,13 @@
 			pinctrl-0 = <&gpio_leds_default>;
 			pinctrl-names = "default";
 
-		led_power_blue: led@26 {
-                        label = "status:blue";
-                        gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                	};
-
-                led_power_green:led@30 {
-                        label = "status:green";
-                        gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                };
-
-                led_power_red:led@45 {
-                        label = "status:red";
-                        gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-			max-brightness = <160>;
-			linux,default-trigger = "none";
-                };
+			led-0 {
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WLAN;
+				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy0tx";
+				default-state = "off";
+			};
 		};
 
 		gpio_keys {
@@ -211,9 +194,9 @@
 			status = "okay";
 
 			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
@@ -479,7 +462,7 @@
 	};
 
 	button_pins: button-state {
-		pins = "gpio17";
+		pins = "gpio35";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -498,24 +481,6 @@
 		bias-pull-up;
 		output-low;
 	};
-
-	led_pins: led_pins {
-                mux_1 {
-                        pins = "gpio26";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-                mux_2 {
-                        pins = "gpio30";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-                mux_3 {
-                        pins = "gpio45";
-                        function = "gpio";
-                        drive-strength = <8>;
-                };
-        };
 };
 
 &license_manager {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189h.dts

@@ -1,777 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * IPQ5332 RDP446 board device tree source
- *
- * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "ipq5332.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "ipq5332-default-memory.dtsi"
-
-/ {
-	model = "CIG WF189H";
-	compatible = "cig,wf189h", "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332-rdp446", "qcom,ipq5332";
-
-	/*     1G  Layout for IPQ5332 + QCN6432 + QCN6432
-	 * +==========+==============+========================+
-	 * |         |              |                         |
-	 * |  Region | Start Offset |          Size           |
-	 * |         |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * |   Q6    |              |                         |
-	 * |  code/  |  0x4A900000  |          25MB           |
-	 * |  data   |              |                         |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  data   |  0x4C200000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * | M3 Dump |  0x4D700000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  QDSS   |  0x4D800000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * | IPQ5332 |              |                         |
-	 * |  CALDB  |  0x4D900000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  data   |  0x4DE00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * | M3 Dump |  0x4F300000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  QDSS   |  0x4E400000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_1|              |                         |
-	 * |  CALDB  |  0x4F500000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  data   |  0x4FA00000  |          21MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * | M3 Dump |  0x50F00000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  QDSS   |  0x51000000  |           1MB           |
-	 * +---------+--------------+-------------------------+
-	 * |QCN6432_2|              |                         |
-	 * |  CALDB  |  0x51100000  |           5MB           |
-	 * +---------+--------------+-------------------------+
-	 * |         |              |                         |
-	 * |   MLO   |  0x51600000  |          12MB           |
-	 * +==================================================+
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * |             Rest of memory for Linux             |
-	 * |                                                  |
-	 * |                                                  |
-	 * |                                                  |
-	 * +==================================================+
-	 */
-
-	reserved-memory {
-
-		/delete-node/ m3_dump@4cc00000;
-		/delete-node/ q6_etr_dump@1;
-		/delete-node/ mlo_global_mem_0@0x4db00000;
-		/delete-node/ wcnss@4a900000;
-		/delete-node/ q6_caldb_region@4ce00000;
-
-		q6_mem_regions: q6_mem_regions@4A900000  {
-			reg = <0x0 0x4a900000 0x0 0x6D00000>;
-			no-map;
-		};
-
-		q6_code_data: q6_code_data@4A900000 {
-			reg = <0x0 0x4a900000 0x0 0x1900000>;
-			no-map;
-		};
-
-		q6_ipq5332_data: q6_ipq5332_data@4C200000 {
-			reg = <0x0 0x4C200000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump: m3_dump@4D700000 {
-			reg = <0x0 0x4D700000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_etr_region: q6_etr_dump@4D800000 {
-			reg = <0x0 0x4D800000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_ipq5332_caldb: q6_ipq5332_caldb@4D900000 {
-			reg = <0x0 0x4D900000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_1: q6_qcn6432_data_1@4DE00000 {
-			reg = <0x0 0x4DE00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_1: m3_dump_qcn6432_1@4F300000 {
-			reg = <0x0 0x4F300000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_1: q6_qcn6432_etr_1@4F400000 {
-			reg = <0x0 0x4F400000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_1: q6_qcn6432_caldb_1@4F500000 {
-			reg = <0x0 0x4F500000 0x0 0x500000>;
-			no-map;
-		};
-
-		q6_qcn6432_data_2: q6_qcn6432_data_2@4FA00000 {
-			reg = <0x0 0x4FA00000 0x0 0x1500000>;
-			no-map;
-		};
-
-		m3_dump_qcn6432_2: m3_dump_qcn6432_2@50F00000 {
-			reg = <0x0 0x50F00000 0x0 0x100000>;
-			no-map;
-                };
-
-		q6_qcn6432_etr_2: q6_qcn6432_etr_2@51000000 {
-			reg = <0x0 0x51000000 0x0 0x100000>;
-			no-map;
-		};
-
-		q6_qcn6432_caldb_2: q6_qcn6432_caldb_2@51100000 {
-			reg = <0x0 0x51100000 0x0 0x500000>;
-			no-map;
-		};
-
-		mlo_global_mem0: mlo_global_mem_0@51600000 {
-			reg = <0x0 0x51600000 0x0 0xC00000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &blsp1_uart0;
-		serial1 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc@0 {
-		mdio:mdio@90000 {
-			pinctrl-0 = <&mdio1_pins &mdio0_pins>;
-			pinctrl-names = "default";
-			/*gpio51 for manhattan reset*/
-      phy-reset-gpio = <&tlmm 22 GPIO_ACTIVE_LOW>;
-			phyaddr_fixup = <0xC90F018>;
-			uniphyaddr_fixup = <0xC90F014>;
-			mdio_clk_fixup; /* MDIO clock sequence fix up flag */
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-				fixup;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <2>;
-				fixup;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <3>;
-				fixup;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <4>;
-				fixup;
-			};
-
-			switch0@10 {
-				compatible = "qca,qca8386";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x10>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						label = "cpu";
-						ethernet = <&gmac2>;
-						dsa-tag-protocol = "qca_4b";
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan1";
-						phy-handle = <&phy0>;
-						phy-mode = "usxgmii";
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan2";
-						phy-handle = <&phy1>;
-						phy-mode = "usxgmii";
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan3";
-						phy-handle = <&phy2>;
-						phy-mode = "usxgmii";
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan4";
-						phy-handle = <&phy3>;
-						phy-mode = "usxgmii";
-					};
-
-					port@5 {
-						reg = <5>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					}; 
-				};
-			};
-		};
-
-		pwmleds {
-			compatible = "pwm-leds";
-
-			led_power_red: red {
-				label = "pwm:red";
-				pwms = <&pwm 3 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_green: green {
-				label = "pwm:green";
-				pwms = <&pwm 2 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-
-			led_power_blue: blue {
-				label = "pwm:blue";
-				pwms = <&pwm 1 1250000>;
-				max-brightness = <160>;
-				linux,default-trigger = "none";
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			button@1 {
-				label = "rst";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-
-			ess-switch@3a000000 {
-				pinctrl-names = "default";
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x2>; /* lan port bitmap */
-				switch_wan_bmp = <0x4>; /* wan port bitmap */
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <4>;
-					};
-				};
-			};
-
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca8386";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio>;
-				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
-				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x0e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-//				link-polling-required = <0>;
-				fdb_sync = "interrupt";
-				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <0>;
-						forced-speed = <2500>;
-						forced-duplex = <1>;
-					};
-					port@1 {
-						port_id = <1>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <2>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <3>;
-						phy_address = <3>;
-					};
-				};
-
-				led_source@2 {
-					source = <2>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@5 {
-					source = <5>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@8 {
-					source = <8>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-				led_source@11 {
-					source = <11>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <2>;
-			reg = <0x3a504000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-			phy-mode = "sgmii";
-		};
-
-		gmac2:dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <1>;
-			reg = <0x3a500000 0x4000>;
-			qcom,mactype = <1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,mht-dev = <1>;
-			qcom,is_switch_connected = <1>;
-			qcom,ppe-offload-disabled = <1>;
-		};
-
-		/* EDMA host driver configuration for the board */
-		edma@3ab00000 {
-			qcom,txdesc-ring-start = <4>;		/* Tx desc ring start ID */
-			qcom,txdesc-rings = <12>;		/* Total number of Tx desc rings to be provisioned */
-			qcom,mht-txdesc-rings = <8>;            /* Extra Tx desc rings to be provisioned for MHT SW ports */
-			qcom,txcmpl-ring-start = <4>;		/* Tx complete ring start ID */
-			qcom,txcmpl-rings = <12>;		/* Total number of Tx complete rings to be provisioned */
-			qcom,mht-txcmpl-rings = <8>;            /* Extra Tx complete rings to be provisioned for mht sw ports. */
-			qcom,rxfill-ring-start = <4>;		/* Rx fill ring start ID */
-			qcom,rxfill-rings = <4>;		/* Total number of Rx fill rings to be provisioned */
-			qcom,rxdesc-ring-start = <12>;		/* Rx desc ring start ID */
-			qcom,rxdesc-rings = <4>;		/* Total number of Rx desc rings to be provisioned */
-			qcom,rx-page-mode = <0>;		/* Rx fill ring page mode */
-			qcom,tx-map-priority-level = <1>;	/* Tx priority level per port */
-			qcom,rx-map-priority-level = <1>;	/* Rx priority level per core */
-			qcom,ppeds-num = <2>;			/* Number of PPEDS nodes */
-			/* PPE-DS node format: <Rx-fill Tx-cmpl Rx Tx Queue-base Queue-count> */
-			qcom,ppeds-map = <1 1 1 1 32 8>,	/* PPEDS Node#0 ring and queue map */
-					<2 2 2 2 40 8>;		/* PPEDS Node#1 ring and queue map */
-			qcom,txdesc-map = <8 9 10 11>,		/* Port0 per-core Tx ring map */
-					<12 13 14 15>,        /* MHT-Port1 per-core Tx ring map */
-					<4 5 6 7>,            /* MHT-Port2 per-core Tx ring map/packets from  vp*/
-					<16 17 18 19>,        /* MHT-Port3 per-core Tx ring map */
-					<20 21 22 23>;        /* MHT-Port4 per-core Tx ring map */
-			qcom,txdesc-fc-grp-map = <1 2 3 4 5>;   /* Per GMAC flow control group map */
-			qcom,rxfill-map = <4 5 6 7>;		/* Per-core Rx fill ring map */
-			qcom,rxdesc-map = <12 13 14 15>;	/* Per-core Rx desc ring map */
-			qcom,rx-queue-start = <0>;		/* Rx queue start */
-			qcom,rx-ring-queue-map = <0 8 16 24>,	/* Priority 0 queues per-core Rx ring map */
-						<1 9 17 25>,	/* Priority 1 queues per-core Rx ring map */
-						<2 10 18 26>,	/* Priority 2 queues per-core Rx ring map */
-						<3 11 19 27>,	/* Priority 3 queues per-core Rx ring map */
-						<4 12 20 28>,	/* Priority 4 queues per-core Rx ring map */
-						<5 13 21 29>,	/* Priority 5 queues per-core Rx ring map */
-						<6 14 22 30>,	/* Priority 6 queues per-core Rx ring map */
-						<7 15 23 31>;	/* Priority 7 queues per-core Rx ring map */
-			interrupts = <0 163 4>,			/* Tx complete ring id #4 IRQ info */
-				   <0 164 4>,			/* Tx complete ring id #5 IRQ info */
-				   <0 165 4>,			/* Tx complete ring id #6 IRQ info */
-				   <0 166 4>,			/* Tx complete ring id #7 IRQ info */
-				   <0 167 4>,			/* Tx complete ring id #8 IRQ info */
-				   <0 168 4>,			/* Tx complete ring id #9 IRQ info */
-				   <0 169 4>,			/* Tx complete ring id #10 IRQ info */
-				   <0 170 4>,			/* Tx complete ring id #11 IRQ info */
-				   <0 171 4>,			/* Tx complete ring id #12 IRQ info */
-				   <0 172 4>,			/* Tx complete ring id #13 IRQ info */
-				   <0 173 4>,			/* Tx complete ring id #14 IRQ info */
-				   <0 174 4>,			/* Tx complete ring id #15 IRQ info */
-				   <0 139 4>,			/* Rx desc ring id #12 IRQ info */
-				   <0 140 4>,			/* Rx desc ring id #13 IRQ info */
-				   <0 141 4>,			/* Rx desc ring id #14 IRQ info */
-				   <0 142 4>,			/* Rx desc ring id #15 IRQ info */
-				   <0 191 4>,			/* Misc error IRQ info */
-				<0 160 4>,			/* PPEDS Node #1(TxComp ring id #1) TxComplete IRQ info */
-				<0 128 4>,			/* PPEDS Node #1(Rx Desc ring id #1) Rx Desc IRQ info */
-				<0 152 4>,			/* PPEDS Node #1(RxFill Desc ring id #1) Rx Fill IRQ info */
-				<0 161 4>,			/* PPEDS Node #2(TxComp ring id #2) TxComplete IRQ info */
-				<0 129 4>,			/* PPEDS Node #2(Rx Desc ring id #2) Rx Desc IRQ info */
-				<0 153 4>,                      /* PPEDS Node #2(RxFill Desc ring id #2) Rx Fill IRQ info */
-				<0 175 4>,                   /* MHT port Tx complete ring id #16 IRQ info */
-				<0 176 4>,                   /* MHT port Tx complete ring id #17 IRQ info */
-				<0 177 4>,                   /* MHT port Tx complete ring id #18 IRQ info */
-				<0 178 4>,                   /* MHT port Tx complete ring id #19 IRQ info */
-				<0 179 4>,                   /* MHT port Tx complete ring id #20 IRQ info */
-				<0 180 4>,                   /* MHT port Tx complete ring id #21 IRQ info */
-				<0 181 4>,                   /* MHT port Tx complete ring id #22 IRQ info */
-				<0 182 4>;                   /* MHT port Tx complete ring id #23 IRQ info */
-		};
-
-		wsi: wsi {
-			id = <0>;
-			num_chip = <3>;
-			status = "okay";
-			chip_info = <0 2 1 2>,
-				    <1 2 2 0>,
-				    <2 2 0 1>;
-		};
-
-		q6v5_wcss: remoteproc@d100000 {
-			boot-args = <0x1 0x4 0x3 0x1 0x2f 0x2>,
-					<0x1 0x4 0x4 0x2 0x2c 0x2>;
-			memory-region = <&q6_mem_regions>,
-					<&mlo_global_mem0>;
-
-			/delete-node/ remoteproc_pd1;
-			/delete-node/ remoteproc_pd2;
-			/delete-node/ remoteproc_pd3;
-
-			q6_wcss_pd4: remoteproc_pd4 {
-				compatible = "qcom,ipq5332-mpd-upd-text";
-				firmware = "IPQ5332/q6_fw4.mdt";
-
-				q6_wcss_pd1: remoteproc_pd1 {
-					compatible = "qcom,ipq5332-wcss-ahb-mpd";
-					firmware = "IPQ5332/q6_fw1.mdt";
-					m3_firmware = "IPQ5332/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 8 0>,
-							<&wcss_smp2p_in 9 0>,
-							<&wcss_smp2p_in 12 0>,
-							<&wcss_smp2p_in 11 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 8>,
-							<&wcss_smp2p_out 9>,
-							<&wcss_smp2p_out 10>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-				};
-
-				q6_wcss_pd2: remoteproc_pd2 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw2.mdt";
-					m3_firmware = "qcn6432/iu_fw.mdt";
-					interrupts-extended = <&wcss_smp2p_in 16 0>,
-							<&wcss_smp2p_in 17 0>,
-							<&wcss_smp2p_in 20 0>,
-							<&wcss_smp2p_in 19 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 16>,
-							<&wcss_smp2p_out 17>,
-							<&wcss_smp2p_out 18>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-
-				q6_wcss_pd3: remoteproc_pd3 {
-					compatible = "qcom,ipq5332-wcss-pcie-mpd";
-					firmware = "IPQ5332/q6_fw3.mdt";
-					interrupts-extended = <&wcss_smp2p_in 24 0>,
-							<&wcss_smp2p_in 25 0>,
-							<&wcss_smp2p_in 28 0>,
-							<&wcss_smp2p_in 27 0>;
-					interrupt-names = "fatal",
-							"ready",
-							"spawn-ack",
-							"stop-ack";
-
-					qcom,smem-states = <&wcss_smp2p_out 24>,
-							<&wcss_smp2p_out 25>,
-							<&wcss_smp2p_out 26>;
-					qcom,smem-state-names = "shutdown",
-								"stop",
-								"spawn";
-					status = "ok";
-				};
-			};
-		};
-	};
-};
-
-&blsp1_uart0 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&xo {
-	clock-frequency = <24000000>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	pinctrl-0 = <&qspi_default_state>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nandcs@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <8>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&tlmm {
-	qspi_default_state: qspi-default-state {
-		qspi_clock {
-			pins = "gpio13";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		qspi_cs {
-			pins = "gpio12";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		qspi_data {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	pwm_pins: pwm_pinmux {
-		/* PWM LED GREEN */
-		mux_1 {
-			pins = "gpio30";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED BLUE */
-		mux_2 {
-			pins = "gpio31";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-		/* PWM LED RED */
-		mux_3 {
-			pins = "gpio29";
-			function = "pwm1";
-			drive-strength = <8>;
-		};
-	};
-
-	serial_1_pins: serial1-pinmux {
-		pins = "gpio33", "gpio34", "gpio35", "gpio36";
-		function = "blsp1_uart2";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-
-	button_pins: button-state {
-		pins = "gpio21";
-		function = "gpio";
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	spi_0_data_clk_pins: spi-0-data-clk-state {
-		pins = "gpio14", "gpio15", "gpio16";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	spi_0_cs_pins: spi-0-cs-state {
-		pins = "gpio17";
-		function = "blsp0_spi";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	mdio1_pins: mdio1-state {
-		mux_0 {
-			pins = "gpio27";
-			function = "mdc1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio28";
-			function = "mdio1";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&license_manager {
-	status = "okay";
-};
-
-&pwm {
-        pinctrl-0 = <&pwm_pins>;
-        used-pwm-indices = <1>, <1>, <0>, <1>;
-        pinctrl-names = "default";
-        status = "okay";
-};
-
-&hs_m31phy_0 {
-	status = "okay";
-};
-
-&wifi0 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4C200000 0x4C200000 0x4C200000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D900000 0x4D900000 0x4D900000 0x0 0x0 0x0>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x41>;
-	mem-region = <&q6_ipq5332_data>;
-	memory-region = <&q6_ipq5332_data>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <0>;
-	status = "okay";
-};
-
-&wifi1 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd2>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4DE00000 0x4DE00000 0x4DE00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4F500000 0x4F500000 0x4F500000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x20000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x061>;
-	mem-region = <&q6_qcn6432_data_1>;
-	memory-region = <&q6_qcn6432_data_1>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <1>;
-	status = "okay";
-	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};
-
-&wifi2 {
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd3>;
-	qcom,rproc_rpd = <&q6v5_wcss>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,tgt-mem-mode = <0>;
-	qcom,bdf-addr = <0x4FA00000 0x4FA00000 0x4FA00000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x51100000 0x51100000 0x51100000 0x0 0x0 0x0>;
-	qcom,umac-irq-reset-addr = <0x18000884>;
-	qcom,caldb-size = <0x500000>;
-	qcom,board_id = <0x0b1>;
-	mem-region = <&q6_qcn6432_data_2>;
-	memory-region = <&q6_qcn6432_data_2>;
-	qcom,wsi = <&wsi>;
-	qcom,wsi_index = <2>;
-	status = "okay";
-	interrupts = <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "umac_reset";
-};

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf189w.dts

@@ -166,10 +166,10 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power_green;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_green;
-		led-upgrade = &led_power_green;
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -261,21 +261,21 @@
 		pwmleds {
 			compatible = "pwm-leds";
 
-			led_power_red: red {
+			red {
 				label = "pwm:red";
 				pwms = <&pwm 3 1250000>;
 				max-brightness = <160>;
 				linux,default-trigger = "none";
 			};
 
-			led_power_green: green {
+			green {
 				label = "pwm:green";
 				pwms = <&pwm 2 1250000>;
 				max-brightness = <160>;
 				linux,default-trigger = "none";
 			};
 
-			led_power_blue: blue {
+			led_power: blue {
 				label = "pwm:blue";
 				pwms = <&pwm 1 1250000>;
 				max-brightness = <160>;
@@ -307,7 +307,7 @@
 				switch_lan_bmp = <0x2>; /* lan port bitmap */
 				switch_wan_bmp = <0x4>; /* wan port bitmap */
 				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0*/
-				switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+				switch_mac_mode1 = <0xc>; /* mac mode for uniphy instance1*/
 				switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
 
 				qcom,port_phyinfo {
@@ -318,7 +318,8 @@
 					};
 					port@1 {
 						port_id = <2>;
-						phy_address = <4>;
+						forced-speed = <2500>;
+						forced-duplex = <1>;
 					};
 				};
 			};
@@ -330,9 +331,9 @@
 				mdio-bus = <&mdio>;
 				switch_mac_mode = <0xc>; /* mac mode for uniphy instance0 */
 				switch_mac_mode1 = <0xc>; /* mac mode1 for uniphy instance1 */
-				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+				switch_cpu_bmp = <0x21>;  /* cpu port bitmap */
 				switch_lan_bmp = <0x0e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				switch_wan_bmp = <0x10>;  /* wan port bitmap */
 //				link-polling-required = <0>;
 				fdb_sync = "interrupt";
 				link-intr-gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
@@ -355,6 +356,15 @@
 						port_id = <3>;
 						phy_address = <3>;
 					};
+					port@4 {
+						port_id = <4>;
+						phy_address = <4>;
+					};
+					port@5 {
+						port_id = <5>;
+						forced-speed = <2500>;
+						forced-duplex = <1>; 
+					};
 				};
 
 				led_source@2 {

feeds/qca-wifi-7/ipq53xx/dts/ipq5332-sonicfi-rap750w-311a.dts

@@ -242,10 +242,6 @@
 		serial1 = &blsp1_uart1;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -328,6 +324,19 @@
 			};
 		};
 
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&gpio_leds_default>;
+			pinctrl-names = "default";
+
+			led-0 {
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WLAN;
+				gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "phy0tx";
+				default-state = "off";
+			};
+		};
 
 		gpio_keys {
 			compatible = "gpio-keys";
@@ -336,39 +345,14 @@
 			status = "okay";
 
 			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
 		};
 
-		pwmleds {
-			compatible = "pwm-leds";
-
-			red {
-				label = "pwm:red";
-				pwms = <&pwm 2 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		
-			green {
-				label = "pwm:green";
-				pwms = <&pwm 3 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		
-			led_power: blue {
-				label = "pwm:blue";
-				pwms = <&pwm 1 1250000>;
-				max-brightness = <1>;
-				linux,default-trigger = "none";
-			};
-		};
-
 		ess-instance {
 			num_devices = <0x2>;
 
@@ -427,6 +411,34 @@
 					};
 				};
 
+				led_source@2 {
+					source = <2>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@5 {
+					source = <5>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@8 {
+					source = <8>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				led_source@11 {
+					source = <11>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
 			};
 		};
 
@@ -537,7 +549,7 @@
 			memory-region = <&q6_mem_regions>;
 
 			q6_wcss_pd1: remoteproc_pd1 {
-				status = "okay";
+				status = "ok";
 			};
 
 			q6_wcss_pd2: remoteproc_pd2 {
@@ -558,7 +570,7 @@
 				qcom,smem-state-names = "shutdown",
 							"stop",
 							"spawn";
-				status = "okay";
+				status = "ok";
 			};
 		};
 	};
@@ -569,13 +581,13 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
-/*
+
 &blsp1_uart1 {
         pinctrl-0 = <&serial_1_pins>;
         pinctrl-names = "default";
         status = "disabled";
 };
-*/
+
 &blsp1_i2c1 {
 	clock-frequency  = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
@@ -652,50 +664,29 @@
 		};
 	};
 
-	pwm_pins: pwm_pinmux {
-			/* PWM LED GREEN */
-			mux_1 {
-				pins = "gpio43";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-			/* PWM LED BLUE */
-			mux_2 {
-				pins = "gpio45";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-			/* PWM LED RED */
-			mux_3 {
-				pins = "gpio44";
-				function = "pwm0";
-				drive-strength = <8>;
-			};
-	};
-/*
 	serial_1_pins: serial1-pinmux {
 		pins = "gpio33", "gpio34", "gpio35", "gpio36";
 		function = "blsp1_uart2";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-*/
+
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio29", "gpio30";
 		function = "blsp1_i2c0";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
-/*
+
 	gpio_leds_default: gpio-leds-default-state {
 		pins = "gpio36";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-down;
-	}; 
-*/
+	};
+
 	button_pins: button-state {
-		pins = "gpio24";
+		pins = "gpio35";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
@@ -734,13 +725,6 @@
 	status = "disabled";
 };
 
-&pwm {
-	pinctrl-0 = <&pwm_pins>;
-	used-pwm-indices = <0>, <1>, <1>, <1>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
 &hs_m31phy_0 {
 	status = "okay";
 };
@@ -763,7 +747,7 @@
 	memory-region = <&q6_ipq5332_data>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <0>;
-	status = "okay";
+	status = "ok";
 };
 
 &wifi1 {
@@ -784,7 +768,7 @@
 	memory-region = <&q6_qcn6432_data_1>;
 	qcom,wsi = <&wsi>;
 	qcom,wsi_index = <1>;
-	status = "okay";
+	status = "ok";
 	interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
 	interrupt-names = "umac_reset";
 };

feeds/qca-wifi-7/ipq53xx/image/ipq53xx.mk

@@ -61,7 +61,7 @@ define Device/sonicfi_rap750w_311a
   IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
   IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb -ath12k-firmware-qcn92xx
+  DEVICE_PACKAGES := ath12k-wifi-sonicfi-rap750w-311a ath12k-firmware-ipq5332-peb
 endef
 TARGET_DEVICES += sonicfi_rap750w_311a
 
@@ -77,17 +77,3 @@ define Device/cig_wf189w
   DEVICE_PACKAGES := ath12k-wifi-cig-wf189w ath12k-firmware-ipq5332-peb-peb
 endef
 TARGET_DEVICES += cig_wf189w
-
-
-define Device/cig_wf189h
-  DEVICE_TITLE := CIG WF189H
-  DEVICE_DTS := ipq5332-cig-wf189h
-  DEVICE_DTS_DIR := ../dts
-  DEVICE_DTS_CONFIG := config@mi04.1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-  IMAGE/nand-factory.ubi := append-ubi
-  DEVICE_PACKAGES := ath12k-wifi-cig-wf189h ath12k-firmware-ipq5332-peb-peb
-endef
-TARGET_DEVICES += cig_wf189h

feeds/tip/certificates/files/usr/bin/mount_certs

@@ -79,8 +79,6 @@ hfcl,ion4xe)
 	;;
 cig,wf186w|\
 cig,wf189|\
-cig,wf189w|\
-cig,wf189h|\
 cig,wf186h|\
 yuncore,ax840|\
 yuncore,fap655)

feeds/ucentral/rrmd/files/etc/init.d/rrmd

@@ -6,8 +6,8 @@ STOP=01
 USE_PROCD=1
 
 start_service() {
-	rm -rf /tmp/threshold_breach_count*
-	rm -rf /tmp/fixed_channel*
+	rm -rf /tmp/threshold_breach_count_phy*
+	rm -rf /tmp/fixed_channel_phy*
 
 	procd_open_instance
 	procd_set_param command /usr/bin/rrmd.uc

feeds/ucentral/rrmd/files/usr/share/rrmd/policy_chanutil.uc

@@ -265,7 +265,7 @@ function dfs_chan_check(iface_num, rcs_channel) {
 }
 
 function fixed_channel_config(iface, iface_num, fixed_channel_f, auto_channel_f, fixed_chan_bkp, channel_config) {
-    // if fixed channel config is stored in the /tmp/fixed_channel_<radio_iface> file
+    // if fixed channel config is stored in the /tmp/fixed_channel_phyX file
     if (fixed_channel_f == 1) {
         if (auto_channel_f == 1) {
             // if current channel is auto => change to fixed
@@ -290,7 +290,6 @@ function fixed_channel_config(iface, iface_num, fixed_channel_f, auto_channel_f,
 function get_chan_util(radio_band, sleep_time) {
 	let pdev_stats = {};
 	let chan_util = 0;
-    let total_usage = 0;
 
     let prev_values = {
 		txFrameCount: null,
@@ -349,8 +348,7 @@ function get_chan_util(radio_band, sleep_time) {
             if (ignore != 1) {
                 let cycle_count_delta = curr_values.cycleCount - prev_values.cycleCount;
                 let rx_clear_delta = curr_values.rxClearCount - prev_values.rxClearCount;
-                if (cycle_count_delta && cycle_count_delta > 0)
-                    total_usage = (rx_clear_delta * 100) / cycle_count_delta;
+                let total_usage = (rx_clear_delta * 100) / cycle_count_delta;
                 chan_util = total_usage;
             }
 
@@ -675,7 +673,7 @@ function channel_optimize() {
                 ulog_info(`[%s] Allowed consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], config.consecutive_threshold_breach);
 
                 if (!current_threshold_breach_count || current_threshold_breach_count == null || current_threshold_breach_count == 'NaN') {
-                    // /tmp/threshold_breach_count_<radio_iface> file doesn't exist yet or has invalid value
+                    // /tmp/phyX_breachcount file doesn't exist yet or has invalid value
                     current_threshold_breach_count = 0;
                 }
                 ulog_info(`[%s] Previous consecutive Channel Utilization threshold breach count = %d \n`, radio_iface[j], current_threshold_breach_count);

feeds/ucentral/ucentral-schema/Makefile

@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1
 
 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=cd070141672c85e72001e2e36616aa7159c6dc8ca4bbacca1b61a41c145cde2f
+PKG_MIRROR_HASH:=fe33f072d7bcbbb14c7c3415e0750699bb5dae8a9af06c59c90c020f8b192a15
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_DATE:=2025-01-27
-PKG_SOURCE_VERSION:=048a53d4a6cf3ef570dab9e2d10989844ae7c355
+PKG_SOURCE_VERSION:=5a6d23b76bc51289ae99d22fdf406516b0c630e6
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause
 

profiles/cig_wf189.yml

@@ -12,4 +12,3 @@ include:
 packages:
   - ipq53xx
   - ftm
-  - qca-ssdk-shell

profiles/cig_wf189h.yml

@@ -1,14 +0,0 @@
----
-profile: cig_wf189h
-target: ipq53xx
-subtarget: generic
-description: Build image for the CIG WF189h
-image: bin/targets/ipq53xx/generic/openwrt-ipq53xx-cig_wf189h-squashfs-sysupgrade.tar
-feeds:
-  - name: qca
-    path: ../../feeds/qca-wifi-7
-include:
-  - ucentral-ap
-packages:
-  - ipq53xx
-  - qca-ssdk-shell

profiles/ucentral-ap.yml

@@ -45,7 +45,6 @@ packages:
   - ucentral-schema
   - ucentral-state
   - ucentral-tools
-  - udhcpinject
   - udhcprelay
   - ufp
   - ugps