WIFI-14751: EAP112 LTE to reconnect automatically after reboot

1. Copy modemmanager to feeds/ucentral. 2. Add function to find the device sysfs path when protocol is "wwan". 3. Call ifup when modem is ready for connection. 4. Add trigger to restart modemmanager when network uci is updated. Signed-off-by: Sebastian Huang <sebastian_huang@accton.com>
qca-wifi-7: change patches-zyxel_nwa130be path
2025-10-29 01:22:25 +00:00 · 2025-07-10 15:22:39 +08:00 · 2025-07-09 06:42:18 +02:00 · 2025-07-08 10:25:21 +02:00 · 2025-07-08 09:47:15 +02:00 · 2025-07-08 09:42:57 +02:00
54 changed files with 4443 additions and 80 deletions
--- a/feeds/ipq807x_v5.4/ath11k-wifi/Makefile
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/Makefile
@@ -41,8 +41,10 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
+	emplus-wap380c \
 	emplus-wap385c \
 	emplus-wap386v2 \
+	emplus-wap581 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -56,6 +58,7 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
 	sonicfi-rap650c \
+	sonicfi-rap630e \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -406,8 +409,10 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap380c,Emplus WAP380C))
 $(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
 $(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap581,Emplus WAP581))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
@@ -416,6 +421,7 @@ $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630e,SonicFi RAP630E))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))
--- a/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap380c.bin.IPQ8074
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap380c.bin.IPQ8074
--- a/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap581.bin.IPQ5018
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap581.bin.IPQ5018
--- a/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap581.bin.QCN6122
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/board-emplus-wap581.bin.QCN6122
--- a/feeds/ipq807x_v5.4/ath11k-wifi/board-sonicfi-rap630e.bin.IPQ5018
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/board-sonicfi-rap630e.bin.IPQ5018
--- a/feeds/ipq807x_v5.4/ath11k-wifi/board-sonicfi-rap630e.bin.QCN6122
+++ b/feeds/ipq807x_v5.4/ath11k-wifi/board-sonicfi-rap630e.bin.QCN6122
--- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds
+++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds
@@ -33,6 +33,11 @@ sonicfi,rap630c-311g|\
 sonicfi,rap630w-311g)
        ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
+sonicfi,rap630e)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	ucidef_set_led_default "power" "POWER" "green:power" "on"
+	;;
 edgecore,oap101|\
 edgecore,oap101-6e|\
 edgecore,oap101e|\
--- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network
+++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network
@@ -68,6 +68,12 @@ qcom_setup_interfaces()
 	glinet,b3000)
 		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
+	sonicfi,rap630e)
+		ucidef_set_interface_wan "eth1"
+		ucidef_set_interface_lan "eth0"
+	emplus,wap581)
+		ucidef_set_interface_wan "eth0 eth1"
+		;;
 	esac
 }

@@ -104,6 +110,16 @@ qcom_setup_macs()
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 2)
 		;;
+	sonicfi,rap630e)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		lan_mac=$(macaddr_canonicalize $mac)
+		wan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth1 $wan_mac
+		ucidef_set_network_device_mac eth0 $lan_mac
+		ip link set eth1 address $wan_mac
+		ip link set eth0 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
--- a/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
+++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
@@ -94,6 +94,15 @@ ath11k_generate_macs_gl_b3000() {
 	}
 }

+ath11k_generate_macs_rap630e() {
+	touch /lib/firmware/ath11k-macs
+	eth=$(cat /sys/class/net/eth0/address)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 caldata_die() {
 	echo "caldata: " "$*"
 	exit 1
@@ -122,6 +131,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -140,6 +150,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	udaya,a6-od2|\
 	wallys,dr5018|\
 	yuncore,fap655|\
+	emplus,wap581|\
 	glinet,b3000)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -152,6 +163,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
@@ -163,6 +175,7 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
 	wallys,dr5018|\
+	emplus,wap581|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;
@@ -178,6 +191,7 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
 		;;
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	glinet,b3000)
@@ -213,6 +227,9 @@ ath11k-macs)
 	cybertan,eww631-b1)
 		ath11k_generate_macs_eww631_b1
 		;;
+	sonicfi,rap630e)
+		ath11k_generate_macs_rap630e
+		;;
 	edgecore,eap104|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
--- a/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh
+++ b/feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh
@@ -73,6 +73,7 @@ platform_check_image() {
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -91,6 +92,7 @@ platform_check_image() {
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
+	emplus,wap581|\
 	edgecore,oap101e-6e)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -138,6 +140,7 @@ platform_do_upgrade() {
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
+	emplus,wap581|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
@@ -149,7 +152,8 @@ platform_do_upgrade() {
 	cybertan,eww631-b1|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630w-312g)
+	sonicfi,rap630w-312g|\
+	sonicfi,rap630e)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)
 			echo "Current bootfrom is $boot_part"
 			if [[ $boot_part == 1 ]]; then
--- a/feeds/ipq807x_v5.4/ipq50xx/config-5.4
+++ b/feeds/ipq807x_v5.4/ipq50xx/config-5.4
@@ -450,6 +450,8 @@ CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_SAMA5D2_PIOBU is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_USB_DETECT is not set
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 # CONFIG_GSI is not set
 # CONFIG_HABANA_AI is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y
--- a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts
+++ b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts
@@ -0,0 +1,831 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP581";
+	compatible = "emplus,wap581", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <&tlmm 0x27 0>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x3e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+					port@4 {
+						port_id = <5>;
+						phy_address = <4>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+				led@28 {
+					label = "led_blue";
+					gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@38 {
+					label = "led_red";
+					gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@46 {
+					label = "led_green";
+					gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+		};
+
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};		
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_red { /* POWER_LED */
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_green { /* 2G_LED */
+			pins = "gpio46";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+
+
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,rproc = <&q6_wcss_pd1>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x23>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x50>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+&pcie_x2 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+	status = "disabled";	
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};
--- a/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630e.dts
+++ b/feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630e.dts
@@ -0,0 +1,893 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Sonicfi RAP630E";
+	compatible = "sonicfi,rap630e", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E000000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E200000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4EF00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F000000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D300000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D500000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E400000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E900000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4F800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4E900000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
+			no-map;
+			reg = <0x0 0x4F600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
+			no-map;
+			reg = <0x0 0x4F700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
+			no-map;
+			reg = <0x0 0x4F800000 0x0 0x500000>;
+		};
+		ramoops: ramoops@50400000 {
+			compatible = "ramoops";
+			reg = <0x0 0x50400000 0x0 0x80000>; // 512KB
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			no-map;
+		};
+
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+		};
+
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio22", "gpio24", "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	audio_pins: audio_pinmux {
+	};
+
+	leds_pins: leds_pins {
+			led_5g {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_2g {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_sys {
+					pins = "gpio26";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_onekey {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+			};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+	leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led34 {
+				label = "green:wifi5";
+				gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led33 {
+				label = "green:wifi2";
+				gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led_power: led26 {
+				label = "green:power";
+				gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led@28 {
+				label = "led_onekey";
+				gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "led_onekey";
+				default-state = "off";
+			};
+		};
+
+		gpio-watchdog {
+			compatible = "linux,wdt-gpio";
+            gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
+			hw_algo = "toggle";
+			hw_margin_ms = <5000>;
+			start-at-boot;
+			always-running;
+			status = "okay";
+		};
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+					<&wcss_smp2p_out 17>,
+					<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+					<&wcss_smp2p_in 25 0>,
+					<&wcss_smp2p_in 28 0>,
+					<&wcss_smp2p_in 27 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+					<&wcss_smp2p_out 25>,
+					<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef	__IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+	#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+	#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	nss-radio-priority = <0>;
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,rproc = <&q6_wcss_pd3>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
+	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data2>;
+#else
+	memory-region = <&q6_qcn6122_data2>;
+#endif
+	nss-radio-priority = <1>;
+	status = "ok";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+	nss-radio-priority = <1>;
+#endif
+	mem-region = <&q6_qcn6122_data2>;
+	qcom,caldb-size = <0x500000>;
+	status = "disabled";
+};
+
+&dwc_0 {
+       /delete-property/ #phy-cells;
+       /delete-property/ phys;
+       /delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+       status = "ok";
+};
+
+&eud {
+	status = "disabled";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
--- a/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk
+++ b/feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk
@@ -73,6 +73,17 @@ define Device/sonicfi_rap630w_311g
 endef
 TARGET_DEVICES += sonicfi_rap630w_311g

+define Device/sonicfi_rap630e
+  DEVICE_TITLE := Sonicfi RAP630E
+  DEVICE_DTS := qcom-ipq5018-rap630e
+  SUPPORTED_DEVICES := sonicfi,rap630e
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630e ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap630e
+
 define Device/edgecore_eap104
  DEVICE_TITLE := EdgeCore EAP104
  DEVICE_DTS := qcom-ipq5018-eap104
@@ -228,3 +239,16 @@ define Device/glinet_b3000
  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += glinet_b3000
+
+define Device/emplus_wap581
+  DEVICE_TITLE := Emplus WAP581
+  DEVICE_DTS := qcom-ipq5018-emplus-wap581
+  SUPPORTED_DEVICES := emplus,wap581
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap581 ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+  IMAGES := sysupgrade.tar nand-factory.bin
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand  
+endef
+TARGET_DEVICES += emplus_wap581
+
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds
@@ -20,6 +20,12 @@ edgecore,oap103)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
        ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
+emplus,wap380c)
+	ucidef_set_led_default "power"  "POWER"  "ipq::led0" "on"
+	ucidef_set_led_netdev  "wan"    "WAN"    "ipq::led1" "eth0"
+	ucidef_set_led_wlan    "wlan2g" "WLAN2G" "ipq::led2" "phy1tpt"
+	ucidef_set_led_wlan    "wlan5g" "WLAN5G" "ipq::led3" "phy0tpt"
+	;;
 sonicfi,rap630w-311g|\
 sonicfi,rap650c|\
 cybertan,eww631-b1)
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network
@@ -12,6 +12,7 @@ qcom_setup_interfaces()
 	ucidef_add_switch_attr "switch0" "reset" "false"

 	case $board in
+	emplus,wap380c|\
 	tplink,ex227|\
 	tplink,ex447)
 		ucidef_set_interface_wan "eth0"
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
@@ -72,6 +72,7 @@ case "$FIRMWARE" in
 	edgecore,oap102 |\
 	edgecore,oap103 |\
 	edgecore,eap106 |\
+	emplus,wap380c|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
--- a/feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh
+++ b/feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh
@@ -29,6 +29,7 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
+	emplus,wap380c|\
 	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
@@ -48,7 +49,8 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
-        cig,wf196)
+	cig,wf196|\
+	emplus,wap380c)
                [ -f /proc/boot_info/rootfs/upgradepartition ] && {
                        CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
                        CI_BOOTCFG=1
--- a/feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts
+++ b/feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP380C";
+	compatible = "emplus,wap380c", "qcom,ipq8074-ap-hk07", "qcom,ipq8074";
+	qcom,msm-id = <0x143 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp6";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		qti: ledc@191E000  {
+			compatible = "qti,ledc";
+			reg = <0x191E000 0x20070>;
+			reg-names = "ledc_base_addr";
+			qti,tcsr_ledc_values = <0x0320193 0x00000000 \
+									0x00000000 0x00000000 \
+									0x00000000 0xFFFFFFFF \
+									0xFFFF7FFF 0xFFFFFFFF \
+									0x007D0820 0x00000000 \
+									0x10482094 0x03FFFFE1>;
+			qti,ledc_blink_indices_cnt = <6>;
+			qti,ledc_blink_indices = <15 14 13 12 11 10>;
+			qti,ledc_blink_idx_src_pair = <5 20>;
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio52";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			ledc_pins: ledc_pinmux {
+				led_clk {
+					pins = "gpio18";
+					function = "led0";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_data {
+					pins = "gpio19";
+					function = "led1";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_clr {
+					pins = "gpio20";
+					function = "led2";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 43 1 &tlmm 44 1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <4>;
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		dp6 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&apc_cpr {
+	/* Same CPR configuration as OAK */
+	compatible = "qcom,cpr4-ipq817x-apss-regulator";
+
+	thread@0 {
+		apc_vreg: regulator {
+			regulator-min-microvolt = <1>;
+			regulator-max-microvolt = <2>;
+			qcom,cpr-fuse-corners = <2>;
+			qcom,cpr-corners = <3>;
+			qcom,cpr-speed-bin-corners = <3>;
+			qcom,cpr-corner-fmax-map = <1 3>;
+
+			qcom,cpr-voltage-ceiling =
+				<840000 904000 944000>;
+			qcom,cpr-voltage-floor =
+				<592000 648000 712000>;
+			qcom,corner-frequencies =
+				<1017600000 1382400000 1382400000>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				< 20000  26000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0   7000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-floor-to-ceiling-max-range =
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>;
+		};
+	};
+};
+
+&npu_cpr {
+	status = "disabled";
+};
+
+&nss0 {
+	qcom,low-frequency = <187200000>;
+	qcom,mid-frequency = <748800000>;
+	qcom,max-frequency = <1497600000>;
+};
+
+&nss0 {
+	npu-supply = <&dummy_reg>;
+	mx-supply = <&dummy_reg>;
+};
+
+&wifi0 {
+	qcom,board_id = <0x92>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};
+
+&ledc {
+	pinctrl-0 = <&ledc_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+
+	led_power: led0 {
+		label = "ipq::led0";
+		linux,default-trigger = "default-on";
+	};
+
+	wan: led1 {
+		label = "ipq::led1";
+		linux,default-trigger = "netdev";
+	};
+
+	wifi2g: led2 {
+		label = "ipq::led2";
+		linux,default-trigger = "phy1tpt";
+	};
+
+	wifi5g: led3 {
+		label = "ipq::led3";
+		linux,default-trigger = "phy0tpt";
+	};
+
+	led4 {
+		label = "ipq::led4";
+		linux,default-trigger = "none";
+	};
+
+	led5 {
+		label = "ipq::led5";
+		linux,default-trigger = "none";
+	};
+};
--- a/feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk
+++ b/feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk
@@ -57,6 +57,15 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106

+define Device/emplus_wap380c
+  DEVICE_TITLE := Emplus WAP380C
+  DEVICE_DTS := qcom-ipq807x-wap380c
+  DEVICE_DTS_CONFIG=config@hk07
+  SUPPORTED_DEVICES := emplus,wap380c
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap380c uboot-envtools
+endef
+TARGET_DEVICES += emplus_wap380c
+
 define Device/sonicfi_rap650c
  DEVICE_TITLE := SonicFi RAP650C
  DEVICE_DTS := qcom-ipq807x-rap650c
--- a/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/Makefile
+++ b/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/Makefile
@@ -0,0 +1,29 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=cig-device-boot
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/cig-device-boot
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+kmod-usb-serial-xr
+  TITLE:=CIG device init
+endef
+
+define Package/cig-device-boot/description
+  Initialize particular functions of the CIG device
+endef
+
+define Build/Compile
+
+endef
+
+define Package/cig-device-boot/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/cig-device.init $(1)/etc/init.d/cig-device-boot
+endef
+
+$(eval $(call BuildPackage,cig-device-boot))
--- a/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/files/cig-device.init
+++ b/feeds/qca-wifi-7/cig-platform-pkg/cig-device-boot/files/cig-device.init
@@ -0,0 +1,7 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot(){
+    [ -e /dev/ttyUSB0 ] && stty -F /dev/ttyUSB0 115200 cs8 -cstopb -parenb -icrnl -onlcr
+}
--- a/feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_sw
+++ b/feeds/qca-wifi-7/cig-platform-pkg/cig-wifi-mode-sw/files/cig_wifi_mode_sw
@@ -3,9 +3,9 @@
 band=$1
 if [ $band -eq 2 ] || [ $band -eq 3 ]; then
 	echo $band > /proc/rf_switch
-	echo "reboot for switch wifi mode 2/3 bands"
+	echo "firstboot for switch wifi mode 2/3 bands"
 	sleep 1
-	reboot
+	firstboot -y -r
 else
 	echo "error band param"
 fi
--- a/feeds/qca-wifi-7/ipq53xx/config-6.1
+++ b/feeds/qca-wifi-7/ipq53xx/config-6.1
@@ -1225,3 +1225,4 @@ CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_RAM=y
 # CONFIG_RTL8221D_PHY is not set
 # CONFIG_INPUT_LSM303AGR is not set
+# CONFIG_USB_SERIAL_XR is not set
--- a/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf672.dts
+++ b/feeds/qca-wifi-7/ipq53xx/dts/ipq5332-cig-wf672.dts
@@ -59,6 +59,8 @@
 			num_devices = <0x1>;

 			ess-switch@3a000000 {
+				pinctrl-0 = <&sfp_pins>;
+				pinctrl-names = "default";
 				switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
 				switch_lan_bmp = <0x2>; /* lan port bitmap */
 				switch_wan_bmp = <0x4>; /* wan port bitmap */
@@ -284,7 +286,7 @@

 &blsp1_i2c1 {
 	status = "okay";
-	clock-frequency  = <400000>;
+	clock-frequency  = <100000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	extgpio:pca9555@20{
@@ -442,6 +444,13 @@
                };
 	};

+	sfp_pins: sfp-state {
+		pins = "gpio43";
+		function = "gpio";
+		bias-pull-up;
+		input-enable;
+	};
+
 	spi_0_data_clk_pins: spi-0-data-clk-state {
 		pins = "gpio14", "gpio15", "gpio16";
 		function = "blsp0_spi";
--- a/feeds/qca-wifi-7/mac80211/patches-cig_wf189h/ath12k/993-CIG-add-thermal-and-antenna-control.patch
+++ b/feeds/qca-wifi-7/mac80211/patches-cig_wf189h/ath12k/993-CIG-add-thermal-and-antenna-control.patch
@@ -0,0 +1,181 @@
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
+--- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
+@@ -10451,6 +10451,30 @@
+ 	return 0;
+ }
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
+{
+    int ret;
+    
+    if (!tx_ant || !rx_ant) {
+        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
+        return -EINVAL;
+    }
+
+    /* return if it is no changed */
+    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
+        return 0;
+
+    mutex_lock(&ar->conf_mutex);
+    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
+    if (!ret) {
+        ar->cfg_tx_chainmask = tx_ant;
+        ar->cfg_rx_chainmask = rx_ant;
+    }
+    mutex_unlock(&ar->conf_mutex);
+
+    return ret;
+}
+
+ static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
+ {
+ 	int num_mgmt = 0;
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
+--- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
+@@ -168,6 +168,7 @@
+ 
+ extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
+ void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
+ void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
+ void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
+--- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
+@@ -401,8 +401,25 @@
+ 	complete(&ar->thermal.wmi_sync);
+ }
+ 
+static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
+    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
+    struct ath12k *ar = thermal_work->ar;
+    int ret;
+
+    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
+    if (ret) {
+        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
+                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
+    }
+    kfree(thermal_work);
+}
+
+ void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
+ {
+	int temp = ar->thermal.temperature;
+    	u32 tx_mask, rx_mask;
+    	bool need_switch = false;
+
+ 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
+ 	    curr_level >= ENHANCED_THERMAL_LEVELS)
+ 		return;
+@@ -416,7 +433,37 @@
+ 	else
+ 		ar->thermal.throttle_state =
+ 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
+-	spin_unlock_bh(&ar->data_lock);
+	
+	/* configure ant mode */
+	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
+        	tx_mask = 0x1;
+        	rx_mask = 0x1;
+        	need_switch = true;
+    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
+        	tx_mask = ar->thermal.default_tx_chainmask;
+        	rx_mask = ar->thermal.default_rx_chainmask;
+        	need_switch = true;
+    	}
+
+    	spin_unlock_bh(&ar->data_lock);
+
+    /* set param async*/ 
+    if (need_switch) {
+        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
+        if (work) {
+            work->ar = ar;
+            work->tx_mask = tx_mask;
+            work->rx_mask = rx_mask;
+            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
+            schedule_work(&work->work);
+            
+            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
+                       ar->pdev_idx, temp,
+                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
+                       (tx_mask > 0x1) ? "dual" : "single",
+                       curr_level);
+        }
+    }
+ }
+ 
+ static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
+@@ -459,6 +506,11 @@
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
+ 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
+
+                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
+ 		}
+ 	} else {
+ 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
+@@ -494,6 +546,10 @@
+ 	for (i = 0; i < ab->num_radios; i++) {
+ 		pdev = &ab->pdevs[i];
+ 		ar = pdev->ar;
+
+		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
+        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
+
+ 		if (!ar)
+ 			continue;
+ 
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
+--- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
+@@ -22,15 +22,15 @@
+ #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
+#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+ #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+@@ -83,6 +83,16 @@
+ 	 * protected by data_lock
+ 	 */
+ 	int temperature;
+
+	u32 default_tx_chainmask;
+    	u32 default_rx_chainmask;
+};
+
+struct ath12k_thermal_work {
+    struct work_struct work;
+    struct ath12k *ar;
+    u32 tx_mask;
+    u32 rx_mask;
+ };
+ 
+ #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION
--- a/feeds/qca-wifi-7/mac80211/patches-cig_wf189w/ath12k/993-CIG-add-thermal-and-antenna-control.patch
+++ b/feeds/qca-wifi-7/mac80211/patches-cig_wf189w/ath12k/993-CIG-add-thermal-and-antenna-control.patch
@@ -0,0 +1,181 @@
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
+--- a/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:49:49.813180049 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.c	2025-06-24 15:50:19.499525336 +0800
+@@ -10451,6 +10451,30 @@
+ 	return 0;
+ }
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant)
+{
+    int ret;
+    
+    if (!tx_ant || !rx_ant) {
+        ath12k_warn(ar->ab, "Invalid chainmask tx=0x%x rx=0x%x\n", tx_ant, rx_ant);
+        return -EINVAL;
+    }
+
+    /* return if it is no changed */
+    if (ar->cfg_tx_chainmask == tx_ant && ar->cfg_rx_chainmask == rx_ant)
+        return 0;
+
+    mutex_lock(&ar->conf_mutex);
+    ret = __ath12k_set_antenna(ar, tx_ant, rx_ant);
+    if (!ret) {
+        ar->cfg_tx_chainmask = tx_ant;
+        ar->cfg_rx_chainmask = rx_ant;
+    }
+    mutex_unlock(&ar->conf_mutex);
+
+    return ret;
+}
+
+ static void ath12k_mgmt_over_wmi_tx_drop(struct ath12k *ar, struct sk_buff *skb)
+ {
+ 	int num_mgmt = 0;
+diff -Nur a/drivers/net/wireless/ath/ath12k/mac.h b/drivers/net/wireless/ath/ath12k/mac.h
+--- a/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:49:49.719178955 +0800
+++ b/drivers/net/wireless/ath/ath12k/mac.h	2025-06-24 15:50:19.500525348 +0800
+@@ -168,6 +168,7 @@
+ 
+ extern const struct htt_rx_ring_tlv_filter ath12k_mac_mon_status_filter_default;
+ 
+int ath12k_mac_set_antenna(struct ath12k *ar, u32 tx_ant, u32 rx_ant);
+ void ath12k_mac_set_cw_intf_detect(struct ath12k *ar, u8 intf_detect_param);
+ void ath12k_mac_set_vendor_intf_detect(struct ath12k *ar, u8 intf_detect_bitmap);
+ void ath12k_mac_ap_ps_recalc(struct ath12k *ar);
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.c b/drivers/net/wireless/ath/ath12k/thermal.c
+--- a/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.c	2025-06-24 15:50:19.500525348 +0800
+@@ -401,8 +401,25 @@
+ 	complete(&ar->thermal.wmi_sync);
+ }
+ 
+static void ath12k_thermal_antenna_switch_work(struct work_struct *work) {
+    struct ath12k_thermal_work *thermal_work = container_of(work, struct ath12k_thermal_work, work);
+    struct ath12k *ar = thermal_work->ar;
+    int ret;
+
+    ret = ath12k_mac_set_antenna(ar, thermal_work->tx_mask, thermal_work->rx_mask);
+    if (ret) {
+        ath12k_warn(ar->ab, "Radio %d: Failed to set antenna (tx=0x%x rx=0x%x, err=%d)\n",
+                   ar->pdev_idx, thermal_work->tx_mask, thermal_work->rx_mask, ret);
+    }
+    kfree(thermal_work);
+}
+
+ void ath12k_thermal_event_throt_level(struct ath12k *ar, int curr_level)
+ {
+	int temp = ar->thermal.temperature;
+    	u32 tx_mask, rx_mask;
+    	bool need_switch = false;
+
+ 	if (test_bit(WMI_TLV_SERVICE_THERM_THROT_POUT_REDUCTION, ar->ab->wmi_ab.svc_map) &&
+ 	    curr_level >= ENHANCED_THERMAL_LEVELS)
+ 		return;
+@@ -416,7 +433,37 @@
+ 	else
+ 		ar->thermal.throttle_state =
+ 			tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][curr_level].dcoffpercent;
+-	spin_unlock_bh(&ar->data_lock);
+	
+	/* configure ant mode */
+	if (temp >= 110 && ar->cfg_tx_chainmask != 0x1) {
+        	tx_mask = 0x1;
+        	rx_mask = 0x1;
+        	need_switch = true;
+    	} else if (temp <= 105 && ar->cfg_tx_chainmask != ar->thermal.default_tx_chainmask) {
+        	tx_mask = ar->thermal.default_tx_chainmask;
+        	rx_mask = ar->thermal.default_rx_chainmask;
+        	need_switch = true;
+    	}
+
+    	spin_unlock_bh(&ar->data_lock);
+
+    /* set param async*/ 
+    if (need_switch) {
+        struct ath12k_thermal_work *work = kmalloc(sizeof(*work), GFP_ATOMIC);
+        if (work) {
+            work->ar = ar;
+            work->tx_mask = tx_mask;
+            work->rx_mask = rx_mask;
+            INIT_WORK(&work->work, ath12k_thermal_antenna_switch_work);
+            schedule_work(&work->work);
+            
+            ath12k_info(ar->ab, "Radio %d: Temp %d°C, %s → %s antenna (level=%d)\n",
+                       ar->pdev_idx, temp,
+                       (ar->cfg_tx_chainmask > 0x1) ? "dual" : "single",
+                       (tx_mask > 0x1) ? "dual" : "single",
+                       curr_level);
+        }
+    }
+ }
+ 
+ static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath12k_thermal_show_temp,
+@@ -459,6 +506,11 @@
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].priority = 0;
+ 			param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db =
+ 				tt_level_configs[ATH12K_ENHANCED_THERMAL_LEVEL][level].pout_reduction_db;
+
+                        ath12k_info(NULL, "Using low=%d, high=%d; throttle_state=%d\n", 
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmplwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].tmphwm,
+                                       param.levelconf[ATH12K_ENHANCED_THERMAL_LEVEL][level].dcoffpercent);
+ 		}
+ 	} else {
+ 		tt_level_configs[ATH12K_DEFAULT_THERMAL_LEVEL][0].dcoffpercent = throttle_state;
+@@ -494,6 +546,10 @@
+ 	for (i = 0; i < ab->num_radios; i++) {
+ 		pdev = &ab->pdevs[i];
+ 		ar = pdev->ar;
+
+		ar->thermal.default_tx_chainmask = ar->pdev->cap.tx_chain_mask;
+        	ar->thermal.default_rx_chainmask = ar->pdev->cap.rx_chain_mask;
+
+ 		if (!ar)
+ 			continue;
+ 
+diff -Nur a/drivers/net/wireless/ath/ath12k/thermal.h b/drivers/net/wireless/ath/ath12k/thermal.h
+--- a/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:49:49.388175103 +0800
+++ b/drivers/net/wireless/ath/ath12k/thermal.h	2025-06-24 15:53:27.288704303 +0800
+@@ -22,15 +22,15 @@
+ #define ATH12K_THERMAL_LVL3_TEMP_HIGH_MARK 120
+ 
+ #define ATH12K_THERMAL_LVL0_V2_TEMP_LOW_MARK -100
+-#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 95
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 90
+-#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 100
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 95
+-#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 105
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 100
+-#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 110
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 105
+-#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL0_V2_TEMP_HIGH_MARK 100
+#define ATH12K_THERMAL_LVL1_V2_TEMP_LOW_MARK 95
+#define ATH12K_THERMAL_LVL1_V2_TEMP_HIGH_MARK 105
+#define ATH12K_THERMAL_LVL2_V2_TEMP_LOW_MARK 100
+#define ATH12K_THERMAL_LVL2_V2_TEMP_HIGH_MARK 115
+#define ATH12K_THERMAL_LVL3_V2_TEMP_LOW_MARK 110
+#define ATH12K_THERMAL_LVL3_V2_TEMP_HIGH_MARK 120
+#define ATH12K_THERMAL_LVL4_V2_TEMP_LOW_MARK 115
+#define ATH12K_THERMAL_LVL4_V2_TEMP_HIGH_MARK 125
+ 
+ #define ATH12K_THERMAL_LVL0_DUTY_CYCLE 0
+ #define ATH12K_THERMAL_LVL1_DUTY_CYCLE 50
+@@ -83,6 +83,16 @@
+ 	 * protected by data_lock
+ 	 */
+ 	int temperature;
+
+	u32 default_tx_chainmask;
+    	u32 default_rx_chainmask;
+};
+
+struct ath12k_thermal_work {
+    struct work_struct work;
+    struct ath12k *ar;
+    u32 tx_mask;
+    u32 rx_mask;
+ };
+ 
+ #ifdef CPTCFG_ATH12K_POWER_OPTIMIZATION
--- a/feeds/qca-wifi-7/mac80211/patches-zyxel_nwa130be/ath12k/0001-thermal-thermal-setting.patch
+++ b/feeds/qca-wifi-7/mac80211/patches-zyxel_nwa130be/ath12k/0001-thermal-thermal-setting.patch
--- a/feeds/qca-wifi-7/platform_drivers/Makefile
+++ b/feeds/qca-wifi-7/platform_drivers/Makefile
@@ -475,6 +475,22 @@ endef

 $(eval $(call KernelPackage,usb-f-qdss))

+define KernelPackage/usb-serial-xr
+  TITLE:=USB xr Serial driver support
+  KCONFIG:=CONFIG_USB_SERIAL_XR
+  FILES:=\
+        $(LINUX_DIR)/drivers/usb/serial/xr_serial.ko
+  AUTOLOAD:=$(call AutoLoad,60,xr_serial)
+  DEPENDS:=+kmod-usb-serial
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-serial-xr/description
+ USB MaxLinear/Exar USB to Serial driver
+endef
+
+$(eval $(call KernelPackage,usb-serial-xr))
+
 LEDS_MENU:=LED modules

 define KernelPackage/leds-tlc591xx
--- a/feeds/tip/certificates/files/etc/uci-defaults/99-tip-certificates.sh
+++ b/feeds/tip/certificates/files/etc/uci-defaults/99-tip-certificates.sh
@@ -4,3 +4,4 @@ uci add system certificates
 uci set system.@certificates[-1].key=/etc/ucentral/key.pem
 uci set system.@certificates[-1].cert=/etc/ucentral/operational.pem
 uci set system.@certificates[-1].ca=/etc/ucentral/operational.ca
+uci commit
--- a/feeds/tip/certificates/files/usr/bin/mount_certs
+++ b/feeds/tip/certificates/files/usr/bin/mount_certs
@@ -105,8 +105,10 @@ cig,wf189h|\
 cig,wf186h|\
 cig,wf196|\
 cig,wf188n|\
+emplus,wap380c|\
 emplus,wap385c|\
 emplus,wap386v2|\
+emplus,wap581|\
 yuncore,ax840|\
 yuncore,fap655)
 	PART_NAME=rootfs_1
--- a/feeds/tip/cloud_discovery/files/usr/bin/est_client
+++ b/feeds/tip/cloud_discovery/files/usr/bin/est_client
@@ -65,11 +65,11 @@ function p7_too_pem(src, dst) {
 	return 0;
 }

-function call_est_server(cert, target) {
+function call_est_server(path, cert, target) {
 	if (generate_csr(cert))
 		return 1;

-	let ret = system('curl -X POST https://qaest.certificates.open-lan.org:8001/.well-known/est/simpleenroll -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert /etc/ucentral/cert.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
+	let ret = system('curl -X POST https://qaest.certificates.open-lan.org:8001/.well-known/est/' + path + ' -d @/tmp/csr.nohdr.p10 -H "Content-Type: application/pkcs10" --cert ' + cert + ' --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.nohdr.p7');
 	if (ret) {
 		ulog(LOG_INFO, 'Failed to request operational certificate\n');
 		return 1;
@@ -86,7 +86,7 @@ function simpleenroll() {
 		return 0;
 	}

-	if (call_est_server('/etc/ucentral/cert.pem', '/etc/ucentral/operational.pem'))
+	if (call_est_server('simpleenroll', '/etc/ucentral/cert.pem', '/etc/ucentral/operational.pem'))
 		return 1; 
 	
 	ulog(LOG_INFO, 'Operational cert acquired\n');
@@ -100,7 +100,7 @@ function simplereenroll() {
 		return 0;
 	}

-	if (call_est_server('/etc/ucentral/operational.pem', '/tmp/operational.pem'))
+	if (call_est_server('simplereenroll', '/etc/ucentral/operational.pem', '/tmp/operational.pem'))
 		return 1;
 	
 	ulog(LOG_INFO, 'Operational cert updated\n');
@@ -114,7 +114,7 @@ function load_operational_ca() {
 		ulog(LOG_INFO, 'Operational CA is present\n');
 		return 0;
 	}
-	let ret = system('curl -X GET https://qaest.certificates.open-lan.org:8001/.well-known/est/cacerts --cert /etc/ucentral/cert.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.ca.nohdr.p7');
+	let ret = system('curl -X GET https://qaest.certificates.open-lan.org:8001/.well-known/est/cacerts --cert /etc/ucentral/operational.pem --key /etc/ucentral/key.pem --cacert /etc/ucentral/insta.pem -o /tmp/operational.ca.nohdr.p7');
 	if (!ret)
 		ret = p7_too_pem('/tmp/operational.ca.nohdr.p7', '/etc/ucentral/operational.ca');
 	if (ret) {
--- a/feeds/ucentral/modemmanager/Config.in
+++ b/feeds/ucentral/modemmanager/Config.in
@@ -0,0 +1,30 @@
+menu "Configuration"
+	depends on PACKAGE_modemmanager
+
+config MODEMMANAGER_WITH_MBIM
+	bool "Include MBIM support"
+	default y
+	help
+	  Compile ModemManager with MBIM support
+
+config MODEMMANAGER_WITH_QMI
+	bool "Include QMI support"
+	default y
+	help
+	  Compile ModemManager with QMI support
+
+config MODEMMANAGER_WITH_QRTR
+	bool "Include QRTR support"
+	default y
+	depends on MODEMMANAGER_WITH_QMI
+	select LIBQMI_WITH_QRTR_GLIB
+	help
+	  Compile ModemManager with QRTR support
+
+config MODEMMANAGER_WITH_AT_COMMAND_VIA_DBUS
+	bool "Allow AT commands via DBus"
+	default n
+	help
+	  Compile ModemManager allowing AT commands without debug flag
+
+endmenu
--- a/feeds/ucentral/modemmanager/Makefile
+++ b/feeds/ucentral/modemmanager/Makefile
@@ -0,0 +1,140 @@
+#
+# Copyright (C) 2016 Velocloud Inc.
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=modemmanager
+PKG_SOURCE_VERSION:=1.20.6
+PKG_RELEASE:=12
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://gitlab.freedesktop.org/mobile-broadband/ModemManager.git
+PKG_MIRROR_HASH:=e90103e2e42bb826bbbac83937a9a69f50348cd6ce0d8da655a12b65494ce7c9
+
+PKG_MAINTAINER:=Nicholas Smith <nicholas@nbembedded.com>
+PKG_LICENSE:=GPL-2.0-or-later
+PKG_LICENSE_FILES:=COPYING
+
+PKG_BUILD_DEPENDS:=glib2/host libxslt/host
+PKG_BUILD_FLAGS:=gc-sections
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+include $(INCLUDE_DIR)/meson.mk
+
+TARGET_CFLAGS += -fno-merge-all-constants -fmerge-constants
+
+define Package/modemmanager/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/modemmanager
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Control utility for any kind of mobile broadband modem
+  URL:=https://www.freedesktop.org/wiki/Software/ModemManager
+  DEPENDS:= \
+	$(INTL_DEPENDS) \
+	+glib2 \
+	+dbus \
+	+ppp \
+	+MODEMMANAGER_WITH_MBIM:libmbim \
+	+MODEMMANAGER_WITH_QMI:libqmi \
+	+MODEMMANAGER_WITH_QRTR:libqrtr-glib
+endef
+
+define Package/modemmanager/description
+  ModemManager is a D-Bus-activated service which allows controlling mobile
+  broadband modems. Add kernel modules for your modems as needed.
+  Select Utilities/usb-modeswitch if needed.
+endef
+
+MESON_ARGS += \
+	-Dudev=false \
+	-Dudevdir=/lib/udev \
+	-Dtests=false \
+	-Dsystemdsystemunitdir=no \
+	-Dsystemd_suspend_resume=false \
+	-Dsystemd_journal=false \
+	-Dpolkit=no \
+	-Dintrospection=false \
+	-Dman=false \
+	-Dbash_completion=false \
+	-Db_lto=true \
+	-Dmbim=$(if $(CONFIG_MODEMMANAGER_WITH_MBIM),true,false) \
+	-Dqmi=$(if $(CONFIG_MODEMMANAGER_WITH_QMI),true,false) \
+	-Dqrtr=$(if $(CONFIG_MODEMMANAGER_WITH_QRTR),true,false) \
+	-Dat_command_via_dbus=$(if $(CONFIG_MODEMMANAGER_WITH_AT_COMMAND_VIA_DBUS),true,false)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/ModemManager
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/ModemManager/*.h $(1)/usr/include/ModemManager
+	$(INSTALL_DIR) $(1)/usr/include/libmm-glib
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/libmm-glib/*.h $(1)/usr/include/libmm-glib
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libmm-glib.so* $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/ModemManager.pc $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/mm-glib.pc $(1)/usr/lib/pkgconfig
+	$(INSTALL_DIR) $(1)/usr/share/dbus-1/interfaces
+	$(CP) $(PKG_BUILD_DIR)/introspection/org.freedesktop.ModemManager1.* $(1)/usr/share/dbus-1/interfaces
+endef
+
+define Package/modemmanager/install
+	$(INSTALL_DIR) $(1)/lib/udev/rules.d
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/lib/udev/rules.d/*.rules $(1)/lib/udev/rules.d
+
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/ModemManager $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/usr/sbin/ModemManager-wrapper $(1)/usr/sbin
+
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/mmcli $(1)/usr/bin
+
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libmm-glib.so.* $(1)/usr/lib
+
+	$(INSTALL_DIR) $(1)/usr/lib/ModemManager
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ModemManager/libmm-shared-*.so* $(1)/usr/lib/ModemManager
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ModemManager/libmm-plugin-*.so* $(1)/usr/lib/ModemManager
+
+	$(INSTALL_DIR) $(1)/usr/lib/ModemManager/connection.d
+	$(INSTALL_BIN) ./files/10-report-down $(1)/usr/lib/ModemManager/connection.d
+
+	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
+	$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/org.freedesktop.ModemManager1.conf $(1)/etc/dbus-1/system.d
+
+	$(INSTALL_DIR) $(1)/usr/share/dbus-1/system-services
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/dbus-1/system-services/org.freedesktop.ModemManager1.service $(1)/usr/share/dbus-1/system-services
+
+	$(INSTALL_DIR) $(1)/usr/share/ModemManager
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/ModemManager/*.conf $(1)/usr/share/ModemManager
+	$(INSTALL_DATA) ./files/modemmanager.common $(1)/usr/share/ModemManager
+
+	$(INSTALL_DIR) $(1)/usr/share/ModemManager/fcc-unlock.available.d
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/ModemManager/fcc-unlock.available.d/* $(1)/usr/share/ModemManager/fcc-unlock.available.d
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/modemmanager.init $(1)/etc/init.d/modemmanager
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/usb
+	$(INSTALL_DATA) ./files/25-modemmanager-usb $(1)/etc/hotplug.d/usb
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/net
+	$(INSTALL_DATA) ./files/25-modemmanager-net $(1)/etc/hotplug.d/net
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/tty
+	$(INSTALL_DATA) ./files/25-modemmanager-tty $(1)/etc/hotplug.d/tty
+
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/wwan
+	$(INSTALL_DATA) ./files/25-modemmanager-wwan $(1)/etc/hotplug.d/wwan
+
+	$(INSTALL_DIR) $(1)/lib/netifd/proto
+	$(INSTALL_BIN) ./files/modemmanager.proto $(1)/lib/netifd/proto/modemmanager.sh
+endef
+
+$(eval $(call BuildPackage,modemmanager))
--- a/feeds/ucentral/modemmanager/README.md
+++ b/feeds/ucentral/modemmanager/README.md
@@ -0,0 +1,44 @@
+# OpenWrt ModemManager
+
+## Description
+
+Cellular modem control and connectivity
+
+Optional libraries libmbim and libqmi are available.
+Your modem may require additional kernel modules and/or the usb-modeswitch
+package.
+
+## Usage
+
+Once installed, you can configure the 2G/3G/4G modem connections directly in
+/etc/config/network as in the following example:
+
+    config interface 'broadband'
+        option device      '/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.2/1-1.2.1'
+        option proto       'modemmanager'
+        option apn         'ac.vodafone.es'
+        option allowedauth 'pap chap'
+        option username    'vodafone'
+        option password    'vodafone'
+        option pincode     '7423'
+        option iptype      'ipv4'
+        option plmn        '214001'
+        option lowpower    '1'
+        option signalrate  '30'
+        option allow_roaming '1'
+
+Only 'device' and 'proto' are mandatory options, the remaining ones are all
+optional.
+
+The 'allowedauth' option allows limiting the list of authentication protocols.
+It is given as a space-separated list of values, including any of the
+following: 'pap', 'chap', 'mschap', 'mschapv2' or 'eap'. It will default to
+allowing all protocols.
+
+The 'iptype' option supports any of these values: 'ipv4', 'ipv6' or 'ipv4v6'.
+It will default to 'ipv4' if not given.
+
+The 'plmn' option allows to set the network operator MCCMNC.
+
+The 'signalrate' option set's the signal refresh rate (in seconds) for the device.
+You can call signal info with command: mmcli -m 0 --signal-get
--- a/feeds/ucentral/modemmanager/files/10-report-down
+++ b/feeds/ucentral/modemmanager/files/10-report-down
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# SPDX-License-Identifier: CC0-1.0
+# 2022 Aleksander Morgado <aleksander@aleksander.es>
+#
+# Automatically report to netifd that the underlying modem
+# is really disconnected
+#
+# require program name and at least 4 arguments
+[ $# -lt 4 ] && exit 1
+
+MODEM_PATH="$1"
+BEARER_PATH="$2"
+INTERFACE="$3"
+STATE="$4"
+
+[ "${STATE}" = "disconnected" ] || exit 0
+
+. /usr/share/ModemManager/modemmanager.common
+. /lib/netifd/netifd-proto.sh
+INCLUDE_ONLY=1 . /lib/netifd/proto/modemmanager.sh
+
+MODEM_STATUS=$(mmcli --modem="${MODEM_PATH}" --output-keyvalue)
+[ -n "${MODEM_STATUS}" ] || exit 1
+
+MODEM_DEVICE=$(modemmanager_get_field "${MODEM_STATUS}" "modem.generic.device")
+[ -n "${MODEM_DEVICE}" ] || exit 2
+
+CFG=$(mm_get_modem_config "${MODEM_DEVICE}")
+[ -n "${CFG}" ] || exit 3
+
+logger -t "modemmanager" "interface ${CFG} (network device ${INTERFACE}) ${STATE}"
+proto_init_update $INTERFACE 0
+proto_send_update $CFG
+exit 0
--- a/feeds/ucentral/modemmanager/files/25-modemmanager-net
+++ b/feeds/ucentral/modemmanager/files/25-modemmanager-net
@@ -0,0 +1,31 @@
+#!/bin/sh
+# Copyright (C) 2016 Velocloud Inc
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+# Load common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+# We require a interface name
+[ -n "${INTERFACE}" ] || exit
+
+# Always make sure the rundir exists
+mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
+
+# Report network interface
+mm_log "info" "${ACTION} network interface ${INTERFACE}: event processed"
+mm_report_event "${ACTION}" "${INTERFACE}" "net" "/sys${DEVPATH}"
+
+# Look for an associated cdc-wdm interface
+
+cdcwdm=""
+
+case "${ACTION}" in
+	"add")	  cdcwdm=$(mm_track_cdcwdm "${INTERFACE}") ;;
+	"remove") cdcwdm=$(mm_untrack_cdcwdm "${INTERFACE}") ;;
+esac
+
+# Report cdc-wdm device, if any
+[ -n "${cdcwdm}" ] && {
+	mm_log "info" "${ACTION} cdc interface ${cdcwdm}: custom event processed"
+	mm_report_event "${ACTION}" "${cdcwdm}" "usbmisc" "/sys${DEVPATH}"
+}
--- a/feeds/ucentral/modemmanager/files/25-modemmanager-tty
+++ b/feeds/ucentral/modemmanager/files/25-modemmanager-tty
@@ -0,0 +1,16 @@
+#!/bin/sh
+# Copyright (C) 2016 Velocloud Inc
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+# Load hotplug common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+# We require a device name
+[ -n "$DEVNAME" ] || exit
+
+# Always make sure the rundir exists
+mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
+
+# Report TTY
+mm_log "info" "${ACTION} serial interface ${DEVNAME}: event processed"
+mm_report_event "${ACTION}" "${DEVNAME}" "tty" "/sys${DEVPATH}"
--- a/feeds/ucentral/modemmanager/files/25-modemmanager-usb
+++ b/feeds/ucentral/modemmanager/files/25-modemmanager-usb
@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright (C) 2019 Aleksander Morgado <aleksander@aleksander.es>
+
+# We need to process only full USB device removal events, we don't
+# want to process specific interface removal events.
+[ "$ACTION" = remove ] || exit
+[ -z "${INTERFACE}" ] || exit
+
+# Load common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+mm_clear_modem_wait_status "/sys${DEVPATH}"
+mm_cleanup_interface_by_sysfspath "/sys${DEVPATH}"
--- a/feeds/ucentral/modemmanager/files/25-modemmanager-wwan
+++ b/feeds/ucentral/modemmanager/files/25-modemmanager-wwan
@@ -0,0 +1,15 @@
+#!/bin/sh
+# Copyright (C) 2021 Aleksander Morgado <aleksander@aleksander.es>
+
+# Load hotplug common utilities
+. /usr/share/ModemManager/modemmanager.common
+
+# We require a device name
+[ -n "$DEVNAME" ] || exit
+
+# Always make sure the rundir exists
+mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
+
+# Report wwan
+mm_log "info" "${ACTION} wwan control port ${DEVNAME}: event processed"
+mm_report_event "${ACTION}" "${DEVNAME}" "wwan" "/sys${DEVPATH}"
--- a/feeds/ucentral/modemmanager/files/modemmanager.common
+++ b/feeds/ucentral/modemmanager/files/modemmanager.common
@@ -0,0 +1,376 @@
+#!/bin/sh
+# Copyright (C) 2016 Velocloud Inc
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+################################################################################
+
+. /lib/functions.sh
+. /lib/netifd/netifd-proto.sh
+
+################################################################################
+# Runtime state
+
+MODEMMANAGER_RUNDIR="/var/run/modemmanager"
+MODEMMANAGER_PID_FILE="${MODEMMANAGER_RUNDIR}/modemmanager.pid"
+MODEMMANAGER_CDCWDM_CACHE="${MODEMMANAGER_RUNDIR}/cdcwdm.cache"
+MODEMMANAGER_SYSFS_CACHE="${MODEMMANAGER_RUNDIR}/sysfs.cache"
+MODEMMANAGER_EVENTS_CACHE="${MODEMMANAGER_RUNDIR}/events.cache"
+
+################################################################################
+# Common logging
+
+mm_log() {
+	local level="$1"; shift
+	logger -p "daemon.${level}" -t "ModemManager[$$]" "hotplug: $*"
+}
+
+################################################################################
+# Receives as input argument the full sysfs path of the device
+# Returns the physical device sysfs path
+#
+# NOTE: this method only works when the device exists, i.e. it cannot be used
+# on removal hotplug events
+
+mm_find_physdev_sysfs_path() {
+	local tmp_path="$1"
+
+	while true; do
+		tmp_path=$(dirname "${tmp_path}")
+
+		# avoid infinite loops iterating
+		[ -z "${tmp_path}" ] || [ "${tmp_path}" = "/" ] && return
+
+		# For USB devices, the physical device will be that with a idVendor
+		# and idProduct pair of files
+		[ -f "${tmp_path}"/idVendor ] && [ -f "${tmp_path}"/idProduct ] && {
+			tmp_path=$(readlink -f "$tmp_path")
+			echo "${tmp_path}"
+			return
+		}
+
+		# For PCI devices, the physical device will be that with a vendor
+		# and device pair of files
+		[ -f "${tmp_path}"/vendor ] && [ -f "${tmp_path}"/device ] && {
+			tmp_path=$(readlink -f "$tmp_path")
+			echo "${tmp_path}"
+			return
+		}
+	done
+}
+
+################################################################################
+
+# Returns the cdc-wdm name retrieved from sysfs
+mm_track_cdcwdm() {
+	local wwan="$1"
+	local cdcwdm
+
+	cdcwdm=$(ls "/sys/class/net/${wwan}/device/usbmisc/")
+	[ -n "${cdcwdm}" ] || return
+
+	# We have to cache it for later, as we won't be able to get the
+	# associated cdc-wdm device on a remove event
+	echo "${wwan} ${cdcwdm}" >> "${MODEMMANAGER_CDCWDM_CACHE}"
+
+	echo "${cdcwdm}"
+}
+
+# Returns the cdc-wdm name retrieved from the cache
+mm_untrack_cdcwdm() {
+	local wwan="$1"
+	local cdcwdm
+
+	# Look for the cached associated cdc-wdm device
+	[ -f "${MODEMMANAGER_CDCWDM_CACHE}" ] || return
+
+	cdcwdm=$(awk -v wwan="${wwan}" '!/^#/ && $0 ~ wwan { print $2 }' "${MODEMMANAGER_CDCWDM_CACHE}")
+	[ -n "${cdcwdm}" ] || return
+
+	# Remove from cache
+	sed -i "/${wwan} ${cdcwdm}/d" "${MODEMMANAGER_CDCWDM_CACHE}"
+
+	echo "${cdcwdm}"
+}
+
+################################################################################
+# ModemManager needs some time from the ports being added until a modem object
+# is exposed in DBus. With the logic here we do an explicit wait of N seconds
+# for ModemManager to expose the new modem object, making sure that the wait is
+# unique per device (i.e. per physical device sysfs path).
+
+# Gets the modem wait status as retrieved from the cache
+mm_get_modem_wait_status() {
+	local sysfspath="$1"
+
+	# If no sysfs cache file, we're done
+	[ -f "${MODEMMANAGER_SYSFS_CACHE}" ] || return
+
+	# Get status of the sysfs path
+	awk -v sysfspath="${sysfspath}" '!/^#/ && $0 ~ sysfspath { print $2 }' "${MODEMMANAGER_SYSFS_CACHE}"
+}
+
+# Clear the modem wait status from the cache, if any
+mm_clear_modem_wait_status() {
+	local sysfspath="$1"
+
+	local escaped_sysfspath
+
+	[ -f "${MODEMMANAGER_SYSFS_CACHE}" ] && {
+		# escape '/', '\' and '&' for sed...
+		escaped_sysfspath=$(echo "$sysfspath" | sed -e 's/[\/&]/\\&/g')
+		sed -i "/${escaped_sysfspath}/d" "${MODEMMANAGER_SYSFS_CACHE}"
+	}
+}
+
+# Sets the modem wait status in the cache
+mm_set_modem_wait_status() {
+	local sysfspath="$1"
+	local status="$2"
+
+	# Remove sysfs line before adding the new one with the new state
+	mm_clear_modem_wait_status "${sysfspath}"
+
+	# Add the new status
+	echo "${sysfspath} ${status}" >> "${MODEMMANAGER_SYSFS_CACHE}"
+}
+
+# Callback for config_foreach()
+mm_get_modem_config_foreach_cb() {
+	local cfg="$1"
+	local sysfspath="$2"
+
+	local proto
+	config_get proto "${cfg}" proto
+	[ "${proto}" = modemmanager ] || return 0
+
+	local dev
+	dev=$(uci_get network "${cfg}" device)
+	[ "${dev}" = "${sysfspath}" ] || return 0
+
+	echo "${cfg}"
+}
+
+# Returns the name of the interface configured for this device
+mm_get_modem_config() {
+	local sysfspath="$1"
+
+	# Look for configuration for the given sysfs path
+	config_load network
+	config_foreach mm_get_modem_config_foreach_cb interface "${sysfspath}"
+}
+
+# Callback for config_foreach()
+mm_get_wwan_config_foreach_cb() {
+	local cfg="$1"
+	local sysfspath="$2"
+
+	local proto
+	config_get proto "${cfg}" proto
+	[ "${proto}" = "wwan" ] || return 0
+
+	local dev devname devpath
+	dev=$(uci_get network "${cfg}" device)
+	devname=$(basename "${dev}")
+	devpath=$(find /sys/devices -name "${devname}")
+	[[ "${devpath}" = "${sysfspath}*" ]] || return 0
+
+	echo "${cfg}"
+}
+
+# Returns the name of the interface configured for this device
+mm_get_wwan_config() {
+	local sysfspath="$1"
+
+	# Look for configuration for the given sysfs path
+	config_load network
+	config_foreach mm_get_wwan_config_foreach_cb interface "${sysfspath}"
+}
+
+# Wait for a modem in the specified sysfspath
+mm_wait_for_modem() {
+	local cfg="$1"
+	local sysfspath="$2"
+
+	# TODO: config max wait
+	local n=45
+	local step=5
+
+	while [ $n -ge 0 ]; do
+		[ -d "${sysfspath}" ] || {
+			mm_log "error" "ignoring modem detection request: no device at ${sysfspath}"
+			proto_set_available "${cfg}" 0
+			return 1
+		}
+
+		# Check if the modem exists at the given sysfs path
+		if ! mmcli -m "${sysfspath}" > /dev/null 2>&1
+		then
+			mm_log "error" "modem not detected at sysfs path"
+		else
+			mm_log "info" "modem exported successfully at ${sysfspath}"
+			mm_log "info" "setting interface '${cfg}' as available"
+			proto_set_available "${cfg}" 1
+			ifup "${cfg}"
+			return 0
+		fi
+
+		sleep $step
+		n=$((n-step))
+	done
+
+	mm_log "error" "timed out waiting for the modem to get exported at ${sysfspath}"
+	proto_set_available "${cfg}" 0
+	return 2
+}
+
+mm_report_modem_wait() {
+	local sysfspath=$1
+
+	local parent_sysfspath status
+
+	parent_sysfspath=$(mm_find_physdev_sysfs_path "$sysfspath")
+	[ -n "${parent_sysfspath}" ] || {
+		mm_log "error" "parent device sysfspath not found"
+		return
+	}
+
+	status=$(mm_get_modem_wait_status "${parent_sysfspath}")
+	case "${status}" in
+		"")
+			local cfg
+
+			cfg=$(mm_get_modem_config "${parent_sysfspath}")
+			[ -z "${cfg}" ] && cfg=$(mm_get_wwan_config "${parent_sysfspath}")
+			if [ -n "${cfg}" ]; then
+				mm_log "info" "interface '${cfg}' is set to configure device '${parent_sysfspath}'"
+				mm_log "info" "now waiting for modem at sysfs path ${parent_sysfspath}"
+				mm_set_modem_wait_status "${parent_sysfspath}" "processed"
+				# Launch subshell for the explicit wait
+				( mm_wait_for_modem "${cfg}" "${parent_sysfspath}" ) > /dev/null 2>&1 &
+			fi
+			;;
+		"processed")
+			mm_log "info" "already waiting for modem at sysfs path ${parent_sysfspath}"
+			;;
+		"ignored")
+			;;
+		*)
+			mm_log "error" "unknown status read for device at sysfs path ${parent_sysfspath}"
+			;;
+	esac
+}
+
+################################################################################
+# Cleanup interfaces
+
+mm_cleanup_interface_cb() {
+	local cfg="$1"
+
+	local proto
+	config_get proto "${cfg}" proto
+	[ "${proto}" = modemmanager ] || return 0
+
+	proto_set_available "${cfg}" 0
+}
+
+mm_cleanup_interfaces() {
+	config_load network
+	config_foreach mm_cleanup_interface_cb interface
+}
+
+mm_cleanup_interface_by_sysfspath() {
+	local dev="$1"
+
+	local cfg
+	cfg=$(mm_get_modem_config "$dev")
+	[ -n "${cfg}" ] || return
+
+	mm_log "info" "setting interface '$cfg' as unavailable"
+	proto_set_available "${cfg}" 0
+}
+
+################################################################################
+# Event reporting
+
+# Receives as input the action, the device name and the subsystem
+mm_report_event() {
+	local action="$1"
+	local name="$2"
+	local subsystem="$3"
+	local sysfspath="$4"
+
+	# Do not save virtual devices
+	local virtual
+	virtual="$(echo "$sysfspath" | cut -d'/' -f4)"
+	[ "$virtual" = "virtual" ] && {
+		mm_log "debug" "sysfspath is a virtual device ($sysfspath)"
+		return
+	}
+
+	# Track/untrack events in cache
+	case "${action}" in
+		"add")
+			# On add events, store event details in cache (if not exists yet)
+			grep -qs "${name},${subsystem}" "${MODEMMANAGER_EVENTS_CACHE}" || \
+				echo "${action},${name},${subsystem},${sysfspath}" >> "${MODEMMANAGER_EVENTS_CACHE}"
+			;;
+		"remove")
+			# On remove events, remove old events from cache (match by subsystem+name)
+			sed -i "/${name},${subsystem}/d" "${MODEMMANAGER_EVENTS_CACHE}"
+			;;
+	esac
+
+	# Report the event
+	mm_log "debug" "event reported: action=${action}, name=${name}, subsystem=${subsystem}"
+	mmcli --report-kernel-event="action=${action},name=${name},subsystem=${subsystem}" 1>/dev/null 2>&1 &
+
+	# Wait for added modem if a sysfspath is given
+	[ -n "${sysfspath}" ] && [ "$action" = "add" ] && mm_report_modem_wait "${sysfspath}"
+}
+
+mm_report_event_from_cache_line() {
+	local event_line="$1"
+
+	local action name subsystem sysfspath
+	action=$(echo "${event_line}" | awk -F ',' '{ print $1 }')
+	name=$(echo "${event_line}" | awk -F ',' '{ print $2 }')
+	subsystem=$(echo "${event_line}" | awk -F ',' '{ print $3 }')
+	sysfspath=$(echo "${event_line}" | awk -F ',' '{ print $4 }')
+
+	mm_log "debug" "cached event found: action=${action}, name=${name}, subsystem=${subsystem}, sysfspath=${sysfspath}"
+	mm_report_event "${action}" "${name}" "${subsystem}" "${sysfspath}"
+}
+
+mm_report_events_from_cache() {
+	# Remove the sysfs cache
+	rm -f "${MODEMMANAGER_SYSFS_CACHE}"
+
+	local n=60
+	local step=1
+	local mmrunning=0
+
+	# Wait for ModemManager to be available in the bus
+	while [ $n -ge 0 ]; do
+		sleep $step
+		mm_log "info" "checking if ModemManager is available..."
+
+		if ! mmcli -L >/dev/null 2>&1
+		then
+			mm_log "info" "ModemManager not yet available"
+		else
+			mmrunning=1
+			break
+		fi
+		n=$((n-step))
+	done
+
+	[ ${mmrunning} -eq 1 ] || {
+		mm_log "error" "couldn't report initial kernel events: ModemManager not running"
+		return
+	}
+
+	# Report cached kernel events
+	while IFS= read -r event_line; do
+		mm_report_event_from_cache_line "${event_line}"
+	done < ${MODEMMANAGER_EVENTS_CACHE}
+}
--- a/feeds/ucentral/modemmanager/files/modemmanager.init
+++ b/feeds/ucentral/modemmanager/files/modemmanager.init
@@ -0,0 +1,49 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
+
+USE_PROCD=1
+START=70
+
+LOG_LEVEL="INFO"
+
+stop_service() {
+	# Load common utils
+	. /usr/share/ModemManager/modemmanager.common
+	# Set all configured interfaces as unavailable
+	mm_cleanup_interfaces
+}
+
+start_service() {
+	# Setup ModemManager service
+	#
+	# We will make sure that the rundir always exists, and we initially cleanup
+	# all interfaces flagging them as unavailable.
+	#
+	# The cached events processing will wait for MM to be available in DBus
+	# and will make sure all ports are re-notified to ModemManager every time
+	# it starts.
+	#
+	# All these commands need to be executed on every MM start, even after
+	# procd-triggered respawns, which is why this is wrapped in a startup
+	# wrapper script called '/usr/sbin/ModemManager-wrapper'.
+	#
+	. /usr/share/ModemManager/modemmanager.common
+	procd_open_instance
+	procd_set_param command /usr/sbin/ModemManager-wrapper
+	procd_append_param command --log-level="$LOG_LEVEL"
+	[ "$LOG_LEVEL" = "DEBUG" ] && procd_append_param command --debug
+	procd_set_param respawn "${respawn_threshold:-3600}" "${respawn_timeout:-5}" "${respawn_retry:-5}"
+	procd_set_param pidfile "${MODEMMANAGER_PID_FILE}"
+	procd_close_instance
+}
+
+reload_service()
+{
+	stop
+	start
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger network
+}
--- a/feeds/ucentral/modemmanager/files/modemmanager.proto
+++ b/feeds/ucentral/modemmanager/files/modemmanager.proto
@@ -0,0 +1,650 @@
+#!/bin/sh
+# Copyright (C) 2016-2019 Aleksander Morgado <aleksander@aleksander.es>
+
+[ -x /usr/bin/mmcli ] || exit 0
+[ -x /usr/sbin/pppd ] || exit 0
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. ../netifd-proto.sh
+	. ./ppp.sh
+	init_proto "$@"
+}
+
+cdr2mask ()
+{
+	# Number of args to shift, 255..255, first non-255 byte, zeroes
+	set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
+	if [ "$1" -gt 1 ]
+	then
+		shift "$1"
+	else
+		shift
+	fi
+	echo "${1-0}"."${2-0}"."${3-0}"."${4-0}"
+}
+
+# This method expects as first argument a list of key-value pairs, as returned by mmcli --output-keyvalue
+# The second argument must be exactly the name of the field to read
+#
+# Sample output:
+#     $ mmcli -m 0 -K
+#     modem.dbus-path                                 : /org/freedesktop/ModemManager1/Modem/0
+#     modem.generic.device-identifier                 : ed6eff2e3e0f90463da1c2a755b2acacd1335752
+#     modem.generic.manufacturer                      : Dell Inc.
+#     modem.generic.model                             : DW5821e Snapdragon X20 LTE
+#     modem.generic.revision                          : T77W968.F1.0.0.4.0.GC.009\n026
+#     modem.generic.carrier-configuration             : GCF
+#     modem.generic.carrier-configuration-revision    : 08E00009
+#     modem.generic.hardware-revision                 : DW5821e Snapdragon X20 LTE
+#     ....
+modemmanager_get_field() {
+	local list=$1
+	local field=$2
+	local value=""
+
+	[ -z "${list}" ] || [ -z "${field}" ] && return
+
+	# there is always at least a whitespace after each key, and we use that as part of the
+	# key matching we do (e.g. to avoid getting 'modem.generic.state-failed-reason' as a result
+	# when grepping for 'modem.generic.state'.
+	line=$(echo "${list}" | grep "${field} ")
+	value=$(echo ${line#*:})
+
+	# not found?
+	[ -n "${value}" ] || return 2
+
+	# only print value if set
+	[ "${value}" != "--" ] && echo "${value}"
+	return 0
+}
+
+# build a comma-separated list of values from the list
+modemmanager_get_multivalue_field() {
+	local list=$1
+	local field=$2
+	local value=""
+	local length idx item
+
+	[ -z "${list}" ] || [ -z "${field}" ] && return
+
+	length=$(modemmanager_get_field "${list}" "${field}.length")
+	[ -n "${length}" ] || return 0
+	[ "$length" -ge 1 ] || return 0
+
+	idx=1
+	while [ $idx -le "$length" ]; do
+		item=$(modemmanager_get_field "${list}" "${field}.value\[$idx\]")
+		[ -n "${item}" ] && [ "${item}" != "--" ] && {
+			[ -n "${value}" ] && value="${value}, "
+			value="${value}${item}"
+		}
+		idx=$((idx + 1))
+	done
+
+	# nothing built?
+	[ -n "${value}" ] || return 2
+
+	# only print value if set
+	echo "${value}"
+	return 0
+}
+
+modemmanager_cleanup_connection() {
+	local modemstatus="$1"
+
+	local bearercount idx bearerpath
+
+	bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
+
+	# do nothing if no bearers reported
+	[ -n "${bearercount}" ] && [ "$bearercount" -ge 1 ] && {
+		# explicitly disconnect just in case
+		mmcli --modem="${device}" --simple-disconnect >/dev/null 2>&1
+		# and remove all bearer objects, if any found
+		idx=1
+		while [ $idx -le "$bearercount" ]; do
+			bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[$idx\]")
+			mmcli --modem "${device}" --delete-bearer="${bearerpath}" >/dev/null 2>&1
+			idx=$((idx + 1))
+		done
+	}
+}
+
+modemmanager_connected_method_ppp_ipv4() {
+	local interface="$1"
+	local ttyname="$2"
+	local username="$3"
+	local password="$4"
+	local allowedauth="$5"
+
+	# all auth types are allowed unless a user given list is given
+	local authopts
+	local pap=1
+	local chap=1
+	local mschap=1
+	local mschapv2=1
+	local eap=1
+
+	[ -n "$allowedauth" ] && {
+		pap=0 chap=0 mschap=0 mschapv2=0 eap=0
+		for auth in $allowedauth; do
+			case $auth in
+				"pap") pap=1 ;;
+				"chap") chap=1 ;;
+				"mschap") mschap=1 ;;
+				"mschapv2") mschapv2=1 ;;
+				"eap") eap=1 ;;
+				*) ;;
+			esac
+		done
+	}
+
+	[ $pap -eq 1 ] || append authopts "refuse-pap"
+	[ $chap -eq 1 ] || append authopts "refuse-chap"
+	[ $mschap -eq 1 ] || append authopts "refuse-mschap"
+	[ $mschapv2 -eq 1 ] || append authopts "refuse-mschap-v2"
+	[ $eap -eq 1 ] || append authopts "refuse-eap"
+
+	proto_run_command "${interface}" /usr/sbin/pppd \
+		"${ttyname}" \
+		115200 \
+		nodetach \
+		noaccomp \
+		nobsdcomp \
+		nopcomp \
+		novj \
+		noauth \
+		$authopts \
+		${username:+ user "$username"} \
+		${password:+ password "$password"} \
+		lcp-echo-failure 5 \
+		lcp-echo-interval 15 \
+		lock \
+		crtscts \
+		nodefaultroute \
+		usepeerdns \
+		ipparam "${interface}" \
+		ip-up-script /lib/netifd/ppp-up \
+		ip-down-script /lib/netifd/ppp-down
+}
+
+modemmanager_disconnected_method_ppp_ipv4() {
+	local interface="$1"
+
+	echo "running disconnection (ppp method)"
+
+	[ -n "${ERROR}" ] && {
+		local errorstring
+		errorstring=$(ppp_exitcode_tostring "${ERROR}")
+		case "$ERROR" in
+			0)
+				;;
+			2)
+				proto_notify_error "$interface" "$errorstring"
+				proto_block_restart "$interface"
+				;;
+			*)
+				proto_notify_error "$interface" "$errorstring"
+				;;
+		esac
+	} || echo "pppd result code not given"
+
+	proto_kill_command "$interface"
+}
+
+modemmanager_connected_method_dhcp_ipv4() {
+	local interface="$1"
+	local wwan="$2"
+	local metric="$3"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	proto_send_update "${interface}"
+
+	json_init
+	json_add_string name "${interface}_4"
+	json_add_string ifname "@${interface}"
+	json_add_string proto "dhcp"
+	proto_add_dynamic_defaults
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	json_close_object
+	ubus call network add_dynamic "$(json_dump)"
+}
+
+modemmanager_connected_method_static_ipv4() {
+	local interface="$1"
+	local wwan="$2"
+	local address="$3"
+	local prefix="$4"
+	local gateway="$5"
+	local mtu="$6"
+	local dns1="$7"
+	local dns2="$8"
+	local metric="$9"
+
+	local mask=""
+
+	[ -n "${address}" ] || {
+		proto_notify_error "${interface}" ADDRESS_MISSING
+		return
+	}
+
+	[ -n "${prefix}" ] || {
+		proto_notify_error "${interface}" PREFIX_MISSING
+		return
+	}
+	mask=$(cdr2mask "${prefix}")
+
+	[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	echo "adding IPv4 address ${address}, netmask ${mask}"
+	proto_add_ipv4_address "${address}" "${mask}"
+	[ -n "${gateway}" ] && {
+		echo "adding default IPv4 route via ${gateway}"
+		proto_add_ipv4_route "0.0.0.0" "0" "${gateway}" "${address}"
+	}
+	[ -n "${dns1}" ] && {
+		echo "adding primary DNS at ${dns1}"
+		proto_add_dns_server "${dns1}"
+	}
+	[ -n "${dns2}" ] && {
+		echo "adding secondary DNS at ${dns2}"
+		proto_add_dns_server "${dns2}"
+	}
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	proto_send_update "${interface}"
+}
+
+modemmanager_connected_method_dhcp_ipv6() {
+	local interface="$1"
+	local wwan="$2"
+	local metric="$3"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	proto_send_update "${interface}"
+
+	json_init
+	json_add_string name "${interface}_6"
+	json_add_string ifname "@${interface}"
+	json_add_string proto "dhcpv6"
+	proto_add_dynamic_defaults
+	json_add_string extendprefix 1 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	json_close_object
+	ubus call network add_dynamic "$(json_dump)"
+}
+
+modemmanager_connected_method_static_ipv6() {
+	local interface="$1"
+	local wwan="$2"
+	local address="$3"
+	local prefix="$4"
+	local gateway="$5"
+	local mtu="$6"
+	local dns1="$7"
+	local dns2="$8"
+	local metric="$9"
+
+	[ -n "${address}" ] || {
+		proto_notify_error "${interface}" ADDRESS_MISSING
+		return
+	}
+
+	[ -n "${prefix}" ] || {
+		proto_notify_error "${interface}" PREFIX_MISSING
+		return
+	}
+
+	[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
+
+	proto_init_update "${wwan}" 1
+	proto_set_keep 1
+	echo "adding IPv6 address ${address}, prefix ${prefix}"
+	proto_add_ipv6_address "${address}" "128"
+	proto_add_ipv6_prefix "${address}/${prefix}"
+	[ -n "${gateway}" ] && {
+		echo "adding default IPv6 route via ${gateway}"
+		proto_add_ipv6_route "${gateway}" "128"
+		proto_add_ipv6_route "::0" "0" "${gateway}" "" "" "${address}/${prefix}"
+	}
+	[ -n "${dns1}" ] && {
+		echo "adding primary DNS at ${dns1}"
+		proto_add_dns_server "${dns1}"
+	}
+	[ -n "${dns2}" ] && {
+		echo "adding secondary DNS at ${dns2}"
+		proto_add_dns_server "${dns2}"
+	}
+	[ -n "$metric" ] && json_add_int metric "${metric}"
+	proto_send_update "${interface}"
+}
+
+modemmanager_disconnected_method_common() {
+	local interface="$1"
+
+	echo "running disconnection (common)"
+
+	proto_init_update "*" 0
+	proto_send_update "${interface}"
+}
+
+proto_modemmanager_init_config() {
+	available=1
+	no_device=1
+	proto_config_add_string device
+	proto_config_add_string apn
+	proto_config_add_string 'allowedauth:list(string)'
+	proto_config_add_string username
+	proto_config_add_string password
+	proto_config_add_string allowedmode
+	proto_config_add_string preferredmode
+	proto_config_add_string pincode
+	proto_config_add_string iptype
+	proto_config_add_string plmn
+	proto_config_add_int signalrate
+	proto_config_add_boolean lowpower
+	proto_config_add_boolean allow_roaming
+	proto_config_add_defaults
+}
+
+# Append param to the global 'connectargs' variable.
+append_param() {
+	local param="$1"
+
+	[ -z "$param" ] && return
+	[ -z "$connectargs" ] || connectargs="${connectargs},"
+	connectargs="${connectargs}${param}"
+}
+
+modemmanager_set_allowed_mode() {
+	local device="$1"
+	local interface="$2"
+	local allowedmode="$3"
+
+	echo "setting allowed mode to '${allowedmode}'"
+	mmcli --modem="${device}" --set-allowed-modes="${allowedmode}" || {
+		proto_notify_error "${interface}" MM_INVALID_ALLOWED_MODES_LIST
+		proto_block_restart "${interface}"
+		return 1
+	}
+}
+
+modemmanager_set_preferred_mode() {
+	local device="$1"
+	local interface="$2"
+	local allowedmode="$3"
+	local preferredmode="$4"
+
+	[ -z "${preferredmode}" ] && {
+		echo "no preferred mode configured"
+		proto_notify_error "${interface}" MM_NO_PREFERRED_MODE_CONFIGURED
+		proto_block_restart "${interface}"
+		return 1
+	}
+
+	[ -z "${allowedmode}" ] && {
+		echo "no allowed mode configured"
+		proto_notify_error "${interface}" MM_NO_ALLOWED_MODE_CONFIGURED
+		proto_block_restart "${interface}"
+		return 1
+	}
+
+	echo "setting preferred mode to '${preferredmode}' (${allowedmode})"
+	mmcli --modem="${device}" \
+		--set-preferred-mode="${preferredmode}" \
+		--set-allowed-modes="${allowedmode}" || {
+		proto_notify_error "${interface}" MM_FAILED_SETTING_PREFERRED_MODE
+		proto_block_restart "${interface}"
+		return 1
+	}
+}
+
+proto_modemmanager_setup() {
+	local interface="$1"
+
+	local modempath modemstatus bearercount bearerpath connectargs bearerstatus beareriface
+	local bearermethod_ipv4 bearermethod_ipv6 auth cliauth
+	local operatorname operatorid registration accesstech signalquality
+	local allowedmode preferredmode
+
+	local device apn allowedauth username password pincode
+	local iptype plmn metric signalrate allow_roaming
+
+	local address prefix gateway mtu dns1 dns2
+
+	json_get_vars device apn allowedauth username password
+	json_get_vars pincode iptype plmn metric signalrate allow_roaming
+	json_get_vars allowedmode preferredmode
+
+	# validate sysfs path given in config
+	[ -n "${device}" ] || {
+		echo "No device specified"
+		proto_notify_error "${interface}" NO_DEVICE
+		proto_set_available "${interface}" 0
+		return 1
+	}
+
+	# validate that ModemManager is handling the modem at the sysfs path
+	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
+	modempath=$(modemmanager_get_field "${modemstatus}" "modem.dbus-path")
+	[ -n "${modempath}" ] || {
+		echo "Device not managed by ModemManager"
+		proto_notify_error "${interface}" DEVICE_NOT_MANAGED
+		proto_set_available "${interface}" 0
+		return 1
+	}
+	echo "modem available at ${modempath}"
+
+	[ -z "${allowedmode}" ] || {
+		case "$allowedmode" in
+			"2g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "2g"
+				;;
+			"3g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "3g"
+				;;
+			"4g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "4g"
+				;;
+			"5g")
+				modemmanager_set_allowed_mode "$device" \
+					"$interface" "5g"
+				;;
+			*)
+				modemmanager_set_preferred_mode "$device" \
+					"$interface" "${allowedmode}" "${preferredmode}"
+				;;
+		esac
+		# check error for allowed_mode and preferred_mode function call
+		[ "$?" -ne "0" ] && return 1
+	}
+
+	# always cleanup before attempting a new connection, just in case
+	modemmanager_cleanup_connection "${modemstatus}"
+
+	# if allowedauth list given, build option string
+	for auth in $allowedauth; do
+		cliauth="${cliauth}${cliauth:+|}$auth"
+	done
+
+	# setup connect args; APN mandatory (even if it may be empty)
+	echo "starting connection with apn '${apn}'..."
+	proto_notify_error "${interface}" MM_CONNECT_IN_PROGRESS
+
+	# setup allow-roaming parameter
+	if [ -n "${allow_roaming}" ] && [ "${allow_roaming}" -eq 0 ];then
+		allow_roaming="no"
+	else
+		# allowed unless a user set the opposite
+		allow_roaming="yes"
+	fi
+
+	# Append options to 'connectargs' variable
+	append_param "apn=${apn}"
+	append_param "allow-roaming=${allow_roaming}"
+	append_param "${iptype:+ip-type=${iptype}}"
+	append_param "${plmn:+operator-id=${plmn}}"
+	append_param "${cliauth:+allowed-auth=${cliauth}}"
+	append_param "${username:+user=${username}}"
+	append_param "${password:+password=${password}}"
+	append_param "${pincode:+pin=${pincode}}"
+
+	mmcli --modem="${device}" --timeout 120 --simple-connect="${connectargs}" || {
+		proto_notify_error "${interface}" MM_CONNECT_FAILED
+		proto_block_restart "${interface}"
+		return 1
+	}
+
+	# check if Signal refresh rate is set
+	if [ -n "${signalrate}" ] && [ "${signalrate}" -eq "${signalrate}" ] 2>/dev/null; then
+		echo "setting signal refresh rate to ${signalrate} seconds"
+		mmcli --modem="${device}" --signal-setup="${signalrate}"
+	else
+		echo "signal refresh rate is not set"
+	fi
+
+	# log additional useful information
+	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
+	operatorname=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-name")
+	[ -n "${operatorname}" ] && echo "network operator name: ${operatorname}"
+	operatorid=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-code")
+	[ -n "${operatorid}" ] && echo "network operator MCCMNC: ${operatorid}"
+	registration=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.registration-state")
+	[ -n "${registration}" ] && echo "registration type: ${registration}"
+	accesstech=$(modemmanager_get_multivalue_field "${modemstatus}" "modem.generic.access-technologies")
+	[ -n "${accesstech}" ] && echo "access technology: ${accesstech}"
+	signalquality=$(modemmanager_get_field "${modemstatus}" "modem.generic.signal-quality.value")
+	[ -n "${signalquality}" ] && echo "signal quality: ${signalquality}%"
+
+	# we won't like it if there are more than one bearers, as that would mean the
+	# user manually created them, and that's unsupported by this proto
+	bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
+	[ -n "${bearercount}" ] && [ "$bearercount" -eq 1 ] || {
+		proto_notify_error "${interface}" INVALID_BEARER_LIST
+		return 1
+	}
+
+	# load connected bearer information
+	bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
+	bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
+
+	# load network interface and method information
+	beareriface=$(modemmanager_get_field "${bearerstatus}" "bearer.status.interface")
+	bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
+	bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
+
+	# setup IPv4
+	[ -n "${bearermethod_ipv4}" ] && {
+		echo "IPv4 connection setup required in interface ${interface}: ${bearermethod_ipv4}"
+		case "${bearermethod_ipv4}" in
+		"dhcp")
+			modemmanager_connected_method_dhcp_ipv4 "${interface}" "${beareriface}" "${metric}"
+			;;
+		"static")
+			address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.address")
+			prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.prefix")
+			gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.gateway")
+			mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.mtu")
+			dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[1\]")
+			dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[2\]")
+			modemmanager_connected_method_static_ipv4 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}"
+			;;
+		"ppp")
+			modemmanager_connected_method_ppp_ipv4 "${interface}" "${beareriface}" "${username}" "${password}" "${allowedauth}"
+			;;
+		*)
+			proto_notify_error "${interface}" UNKNOWN_METHOD
+			return 1
+			;;
+		esac
+	}
+
+	# setup IPv6
+	# note: if using ipv4v6, both IPv4 and IPv6 settings will have the same MTU and metric values reported
+	[ -n "${bearermethod_ipv6}" ] && {
+		echo "IPv6 connection setup required in interface ${interface}: ${bearermethod_ipv6}"
+		case "${bearermethod_ipv6}" in
+		"dhcp")
+			modemmanager_connected_method_dhcp_ipv6 "${interface}" "${beareriface}" "${metric}"
+			;;
+		"static")
+			address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.address")
+			prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.prefix")
+			gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.gateway")
+			mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.mtu")
+			dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[1\]")
+			dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[2\]")
+			modemmanager_connected_method_static_ipv6 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}"
+			;;
+		"ppp")
+			proto_notify_error "${interface}" "unsupported method"
+			return 1
+			;;
+		*)
+			proto_notify_error "${interface}" UNKNOWN_METHOD
+			return 1
+			;;
+		esac
+	}
+
+	return 0
+}
+
+proto_modemmanager_teardown() {
+	local interface="$1"
+
+	local modemstatus bearerpath errorstring
+	local bearermethod_ipv4 bearermethod_ipv6
+
+	local device lowpower iptype
+	json_get_vars device lowpower iptype
+
+	echo "stopping network"
+
+	# load connected bearer information, just the first one should be ok
+	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
+	bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
+	[ -n "${bearerpath}" ] || {
+		echo "couldn't load bearer path: disconnecting anyway"
+		mmcli --modem="${device}" --simple-disconnect >/dev/null 2>&1
+		return
+	}
+
+	# load bearer connection methods
+	bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
+	bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
+	[ -n "${bearermethod_ipv4}" ] &&
+		echo "IPv4 connection teardown required in interface ${interface}: ${bearermethod_ipv4}"
+	bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
+	[ -n "${bearermethod_ipv6}" ] &&
+		echo "IPv6 connection teardown required in interface ${interface}: ${bearermethod_ipv6}"
+
+	# disconnection handling only requires special treatment in IPv4/PPP
+	[ "${bearermethod_ipv4}" = "ppp" ] && modemmanager_disconnected_method_ppp_ipv4 "${interface}"
+	modemmanager_disconnected_method_common "${interface}"
+
+	# disconnect
+	mmcli --modem="${device}" --simple-disconnect ||
+		proto_notify_error "${interface}" DISCONNECT_FAILED
+
+	# disable
+	mmcli --modem="${device}" --disable
+
+	# low power, only if requested
+	[ "${lowpower:-0}" -lt 1 ] ||
+		mmcli --modem="${device}" --set-power-state-low
+
+	proto_init_update "*" 0
+	proto_send_update "$interface"
+}
+
+[ -n "$INCLUDE_ONLY" ] || {
+	add_protocol modemmanager
+}
--- a/feeds/ucentral/modemmanager/files/usr/sbin/ModemManager-wrapper
+++ b/feeds/ucentral/modemmanager/files/usr/sbin/ModemManager-wrapper
@@ -0,0 +1,33 @@
+#!/bin/sh
+
+trap_with_arg() {
+	func="$1" ; shift
+	for sig ; do
+		# shellcheck disable=SC2064
+		trap "$func $sig" "$sig"
+	done
+}
+
+func_trap() {
+	logger "ModemManager-wrapper[$$]" "Sending signal ${1}..."
+	kill "-${1}" "$CHILD" 2>/dev/null
+}
+
+main() {
+	. /usr/share/ModemManager/modemmanager.common
+
+	trap_with_arg func_trap INT TERM KILL
+
+	mkdir -p "${MODEMMANAGER_RUNDIR}"
+	chmod 0755 "${MODEMMANAGER_RUNDIR}"
+	mm_cleanup_interfaces
+
+	/usr/sbin/ModemManager "$@" 1>/dev/null 2>/dev/null &
+	CHILD="$!"
+
+	mm_report_events_from_cache
+
+	wait "$CHILD"
+}
+
+main "$@"
--- a/feeds/ucentral/ucentral-client/Makefile
+++ b/feeds/ucentral/ucentral-client/Makefile
@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-client
 PKG_RELEASE:=1

 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-client.git
-PKG_MIRROR_HASH:=7dfeaedf141a6377de2dc6bcd646b1640201f204db42af52777d018700bc991c
+PKG_MIRROR_HASH:=2e28e0aa61b74851c7daf3634ec34d303a603e881e6c5d1fd76c837dea527582
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-06-27
-PKG_SOURCE_VERSION:=08a842d9921196821a19d52b9061db6c428aab3f
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=69829f63ea172ce9bd19b7b02073746fe9cf6a52

 PKG_LICENSE:=BSD-3-Clause
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
--- a/feeds/ucentral/ucentral-client/files/etc/init.d/ucentral
+++ b/feeds/ucentral/ucentral-client/files/etc/init.d/ucentral
@@ -44,14 +44,15 @@ start_service() {

 	server=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["server"]')
 	port=$(cat /etc/ucentral/gateway.json | jsonfilter -e '@["port"]')
+	[ -n "$server" -a -n "$port" ] || return 0

 	boot_cause=$(cat /tmp/pstore | jsonfilter -e '@["pstore"][-1]'.boot_cause)
 	[ -z $boot_cause ] && boot_cause=coldboot
 	procd_open_instance
 	procd_set_param command "$PROG"
 	[ -n "$serial" ] && procd_append_param command -S $serial
-	[ -n "$server" ] && procd_append_param command -s $server
-	[ -n "$port" ] && procd_append_param command -P $port
+	procd_append_param command -s $server
+	procd_append_param command -P $port
 	[ "$debug" -eq 0 ] || procd_append_param command -d
 	[ "$insecure" -eq 0 ] || procd_append_param command -i
 	[ -z "$(mount | grep 'tmpfs on / type tmpfs')" ] || procd_append_param command -r
--- a/feeds/ucentral/ucentral-schema/Makefile
+++ b/feeds/ucentral/ucentral-schema/Makefile
@@ -4,10 +4,10 @@ PKG_NAME:=ucentral-schema
 PKG_RELEASE:=1

 PKG_SOURCE_URL=https://github.com/Telecominfraproject/wlan-ucentral-schema.git
-PKG_MIRROR_HASH:=aac8731d564f4ccd85a366417b9a02c1d3de9b6533d1474b58768249c50707f1
+PKG_MIRROR_HASH:=3857f9adcb12625350ada5274d177540d205f0b77c51129d298bb5d38fb6dbf6
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2025-06-27
-PKG_SOURCE_VERSION:=125a148764c9ef7a02086b6fadccd7b96bfdf591
+PKG_SOURCE_DATE:=2025-07-08
+PKG_SOURCE_VERSION:=f3d1356a066daa28f7ee1cf3adc27f09ca742708
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=BSD-3-Clause

--- a/feeds/ucentral/udevmand/Makefile
+++ b/feeds/ucentral/udevmand/Makefile
@@ -5,9 +5,9 @@ PKG_RELEASE:=1

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=https://github.com/blogic/udevmand.git
-PKG_MIRROR_HASH:=b643cae7315b6bc92262b9b632fe39bd9f766525a5fb69e8a8a5c37f4e26867b
-PKG_SOURCE_DATE:=20241219
-PKG_SOURCE_VERSION:=be0f45e7bcf6bad8143222c541c3d077bdadbecc
+PKG_MIRROR_HASH:=6f6a5536656a64e1f38f03747ef06ab03b28ef797adc72a901eb7dbc6e45e496
+PKG_SOURCE_DATE:=20250704
+PKG_SOURCE_VERSION:=e56be31d7c341467cc26714dac5c6b450a612808
 CMAKE_INSTALL:=1

 PKG_LICENSE:=LGPL-2.1
--- a/patches/0090-netifd-add-gcmp-256-as-a-cipher-suite-when-SAE-is-en.patch
+++ b/patches/0090-netifd-add-gcmp-256-as-a-cipher-suite-when-SAE-is-en.patch
@@ -1,59 +0,0 @@
-From 6866492b26cf59d5557d1ea0fdae24834410afff Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Wed, 11 Jun 2025 14:24:48 +0200
-Subject: [PATCH] netifd: add gcmp-256 as a cipher suite when SAE is enabled on
- HE/EHT
-
-Fixes: WIFI-14594
-Signed-off-by: John Crispin <john@phrozen.org>
---
- .../config/netifd/patches/200-gcmp-256.patch  | 37 +++++++++++++++++++
- 1 file changed, 37 insertions(+)
- create mode 100644 package/network/config/netifd/patches/200-gcmp-256.patch
-
-diff --git a/package/network/config/netifd/patches/200-gcmp-256.patch b/package/network/config/netifd/patches/200-gcmp-256.patch
-new file mode 100644
-index 0000000000..defe66a816
--- /dev/null
-+++ b/package/network/config/netifd/patches/200-gcmp-256.patch
-@@ -0,0 +1,37 @@
-+--- a/scripts/netifd-wireless.sh
-++++ b/scripts/netifd-wireless.sh
-+@@ -39,11 +39,10 @@ prepare_key_wep() {
-+ }
-+ 
-+ _wdev_prepare_channel() {
-+-	json_get_vars channel band hwmode
-++	json_get_vars channel band hwmode htmode
-+ 
-+ 	auto_channel=0
-+ 	enable_ht=0
-+-	htmode=
-+ 	hwmode="${hwmode##11}"
-+ 
-+ 	case "$channel" in
-+@@ -80,6 +79,11 @@ _wdev_prepare_channel() {
-+ 			esac
-+ 		;;
-+ 	esac
-++
-++	case "$htmode" in
-++		HE*|EHT*) wpa3_cipher="GCMP-256 ";;
-++		*) wpa3_cipher="";;
-++	esac
-+ }
-+ 
-+ _wdev_handler() {
-+@@ -216,6 +220,9 @@ wireless_vif_parse_encryption() {
-+ 		wpa_cipher="GCMP"
-+ 	else
-+ 		wpa_cipher="CCMP"
-++		case "$encryption" in
-++			sae*|wpa3*|psk3*|owe) wpa_cipher="${wpa3_cipher}$wpa_cipher";;
-++		esac
-+ 	fi
-+ 
-+ 	case "$encryption" in
-- 
-2.34.1
-
--- a/patches/0092-ubus-bump-to-latest-HEAD.patch
+++ b/patches/0092-ubus-bump-to-latest-HEAD.patch
@@ -0,0 +1,30 @@
+From 2630ee161ad4d5981d98ee8cf0b7be3832b32ee8 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Thu, 3 Jul 2025 09:20:03 +0200
+Subject: [PATCH] ubus: bump to latest HEAD
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ package/system/ubus/Makefile | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/package/system/ubus/Makefile b/package/system/ubus/Makefile
+index 82c4dc601a..ea536930ea 100644
+--- a/package/system/ubus/Makefile
+++ b/package/system/ubus/Makefile
+@@ -5,9 +5,9 @@ PKG_RELEASE:=1
+ 
+ PKG_SOURCE_PROTO:=git
+ PKG_SOURCE_URL=$(PROJECT_GIT)/project/ubus.git
+-PKG_SOURCE_DATE:=2023-06-05
+-PKG_SOURCE_VERSION:=f787c97b34894a38b15599886cacbca01271684f
+-PKG_MIRROR_HASH:=f4e898eb9207f069652f1767835f6aa9f015df2282d51e50ab57a0c3736f36e3
+PKG_SOURCE_DATE:=2025-07-02
+PKG_SOURCE_VERSION:=5952b48e251c0ea76dfce97f129da6f18d889eda
+PKG_MIRROR_HASH:=3285485a4d9d0e62e4abcfb004d2be0bec7b5ebc564c68030be0c35f0bc223c4
+ PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
+ CMAKE_INSTALL:=1
+ 
+-- 
+2.34.1
+
--- a/profiles/cig_wf672.yml
+++ b/profiles/cig_wf672.yml
@@ -15,6 +15,7 @@ packages:
  - qca-ssdk-shell
  - iperf3
  - sysstat
+  - cig-device-boot
  - kmod-cig-wifi-mode-sw
  - kmod-input-lsm303agr
  - kmod-rtl8221d-phy
@@ -22,3 +23,6 @@ packages:
  - kmod-hwmon-tmp103
  - kmod-iio-ilps22qs
  - kmod-cig-poe-judgment 
+diffconfig: |
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_STTY=y
--- a/profiles/emplus_wap380c.yml
+++ b/profiles/emplus_wap380c.yml
@@ -0,0 +1,21 @@
+---
+profile: emplus_wap380c
+target: ipq807x
+subtarget: generic
+description: Build image for the Emplus WAP380C
+image: bin/targets/ipq807x/generic/openwrt-ipq807x-emplus_wap380c-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq807x
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=0
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_TFTP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
--- a/profiles/emplus_wap581.yml
+++ b/profiles/emplus_wap581.yml
@@ -0,0 +1,27 @@
+---
+profile: emplus_wap581
+target: ipq50xx
+subtarget: generic
+description: Build image for Emplus WAP581
+image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-emplus_wap581-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+include:
+  - ucentral-ap
+packages:
+  - ipq50xx
+  - iperf3
+  - lscpu
+  - tree
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=512
+  CONFIG_BUSYBOX_CUSTOM=y
+  CONFIG_BUSYBOX_CONFIG_TFTP=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+  CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
+  CONFIG_BUSYBOX_CONFIG_MPSTAT=y
+  CONFIG_BUSYBOX_CONFIG_PSTREE=y
+
--- a/profiles/sonicfi_rap630e.yml
+++ b/profiles/sonicfi_rap630e.yml
@@ -0,0 +1,15 @@
+---
+profile: sonicfi_rap630e
+target: ipq50xx
+subtarget: generic
+description: Build image for the Sonicfi Wallmount EAP RAP630E
+image: bin/targets/ipq50xx/generic/openwrt-ipq50xx-sonicfi_rap630e-squashfs-sysupgrade.tar
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x_v5.4
+packages:
+  - ipq50xx
+include:
+  - ucentral-ap
+diffconfig: |
+  CONFIG_KERNEL_IPQ_MEM_PROFILE=512
Author	SHA1	Message	Date
Sebastian Huang	6060d2389f	WIFI-14751: EAP112 LTE to reconnect automatically after reboot 1. Copy modemmanager to feeds/ucentral. 2. Add function to find the device sysfs path when protocol is "wwan". 3. Call ifup when modem is ready for connection. 4. Add trigger to restart modemmanager when network uci is updated. Signed-off-by: Sebastian Huang <sebastian_huang@accton.com>	2025-07-10 15:22:39 +08:00
YenLin Pan	f67a2c404b	qca-wifi-7: change patches-zyxel_nwa130be path The original path cannot be patched Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>	2025-07-09 06:42:18 +02:00
John Crispin	974351335f	ucentral-schema: update to latest HEAD f3d1356 add reenroll command Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 10:25:21 +02:00
Justin.Guo	311b1a620c	cig-device-boot: update WF672A configuration * Reduce the i2c frequency to enable the encryption chip to be recognized * Add USB xr Serial driver and init gps uart param * Factory reset when switching wifi mode * SFP gpio should be input mode Fixes: WIFI-14789 Signed-off-by: Justin.Guo <guoxijun@actiontec.com>	2025-07-08 09:47:15 +02:00
John Crispin	066b442247	ucentral-client: prevent client from starting before cloud was discovered Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:42:57 +02:00
John Crispin	f2b69ce972	est_client: fix reenroll call the wrong certificate was being used Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:41:12 +02:00
John Crispin	88830b2537	ucentral-client: update to latest HEAD 69829f6 Revert "Cloud Package Manager" c3a3e05 remove certupdate from proto.c 4c4710a add reenroll to proto.c Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:40:30 +02:00
John Crispin	842b21fb5e	certificates: add an explicit uci commit call Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 09:40:06 +02:00
John Crispin	8f8eb63ac4	ubus: fix PKG_MIRROR_HASH Signed-off-by: John Crispin <john@phrozen.org>	2025-07-08 08:45:48 +02:00
Justin.Guo	367a919d67	qca-wifi-7: WF-189w/h add temperature control 1.Change the WiFi temperature threshold. 2.Use single antenna when temperature is too high. Fixes: WIFI-14788 Signed-off-by: Justin.Guo <guoxijun@actiontec.com>	2025-07-08 08:14:39 +02:00
Jesse Wu	919fe12372	ipq807x: add EMPLUS WAP380C support Fixes: WIFI-14791 Signed-off-by: Jesse Wu <Jesse.Wu@emplustech.com>	2025-07-08 08:13:39 +02:00
John Crispin	d6d22433c5	ucentral-schema: update to latest HEAD 50ba97e allow sta-authorized and ft-finish to wifi-frames enum Signed-off-by: John Crispin <john@phrozen.org>	2025-07-07 16:43:35 +02:00
John Crispin	eff579f3ec	ucentral-schema: update to latest HEAD e062b7c properly detect 320MHz channel width Fixes: WIFI-14607 Signed-off-by: John Crispin <john@phrozen.org>	2025-07-07 07:55:49 +02:00
John Crispin	0768008764	ucentral-schema: update to latest HEAD 2819f87 HaLow: fix channel 8/24/40 cannot be set 3b04c09 HaLow: set default channel to avoid HaLow not working when no channel set by JSON Signed-off-by: John Crispin <john@phrozen.org>	2025-07-07 07:53:19 +02:00
John Crispin	53c45dfaeb	udevmand: update to latest HEAD e56be31 udevmand: fix segmentation fault during iface flushing Fixes: WIFI-14752 Signed-off-by: John Crispin <john@phrozen.org>	2025-07-04 08:39:43 +02:00
John Crispin	7e3f851788	ucentral-schema: update to latest HEAD 2b8a58b dont crash if udevmand does not reply 985f3cb WIFI-14588: Cloud Package Manager Fixes: WIFI-14752 Signed-off-by: John Crispin <john@phrozen.org>	2025-07-04 08:39:26 +02:00
John Crispin	205484080e	Revert "netifd: add gcmp-256 as a cipher suite when SAE is enabled on HE/EHT" This reverts commit `b17db16c15`. Signed-off-by: John Crispin <john@phrozen.org>	2025-07-03 16:46:02 +02:00
cpchangemplu	f1fc99ccbe	ipq50xx: Add back emplus,wap385c Signed-off-by: cpchangemplu <cp.chang@emplustech.com>	2025-07-03 14:26:46 +02:00
jackcybertan	db36e09553	ipq50xx : add sonicfi rap630e Fixes: WIFI-14728 Signed-off-by: jackcybertan <jack.tsai@cybertan.com.tw>	2025-07-03 14:23:37 +02:00
John Crispin	b3174a0434	ubus: bump to latest HEAD Signed-off-by: John Crispin <john@phrozen.org>	2025-07-03 09:21:59 +02:00