ucentral-tools: the git repo is gone, move the code into the package

Signed-off-by: John Crispin <john@phrozen.org>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/hostapd/hostapd/files/hostapd.sh

@@ -117,6 +117,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -160,7 +162,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -259,6 +261,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -467,9 +471,6 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -723,8 +724,7 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request 
+		vendor_elements fils uci_section dynamic_probe_resp
 
 	set_default fils 0
 	set_default isolate 0
@@ -778,8 +778,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/hostapd/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/hostapd/hostapd/src/src/ap/ubus.c

@@ -1944,21 +1944,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/hostapd/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -41,10 +41,6 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
-	emplus-wap380c \
-	emplus-wap385c \
-	emplus-wap386v2 \
-	emplus-wap581 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -57,8 +53,6 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
-	sonicfi-rap650c \
-	sonicfi-rap630e \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -409,10 +403,6 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap380c,Emplus WAP380C))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
-$(eval $(call generate-ath11k-wifi-package,emplus-wap581,Emplus WAP581))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
@@ -420,8 +410,6 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630e,SonicFi RAP630E))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/cooling/files/cooling.init

@@ -18,11 +18,9 @@ start() {
 	[ "$enabled" -gt 0 ] || return 1
 
 	case "$board" in
-		sonicfi,rap630c-311g)
-		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630c-311g-cooling.conf
-		;;
-		sonicfi,rap630w-311g)
-		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630w-311g-cooling.conf
+	sonicfi,rap630c-311g|\
+	sonicfi,rap630w-311g)
+        service_start /usr/sbin/cooling
 		;;
 	esac
 

feeds/ipq807x_v5.4/cooling/src/cooling.c

@@ -28,270 +28,143 @@
 
 #define CUR_STATE_PATH "/sys/devices/virtual/thermal/cooling_device%i/cur_state"
 #define TEMPER_PATH "/sys/devices/virtual/thermal/thermal_zone%i/temp"
-#define CPU_FREQ_PATH "/sys/devices/system/cpu/cpu0/cpufreq/%s"
 
 #define PATH_MAX 256
-#define BUF_MAX 32
+#define BUF_MAX 8
+#define THERSHOLD_MAX 20
 #define PHY0 0
 #define PHY1 1
-#define NUM_VALUES 4
-
-int load_config_file=0;
-
-//#define ULOG_INFO(fmt, ...) ulog(LOG_INFO, fmt, ## __VA_ARGS__)
 
 typedef unsigned char	u8;
-typedef unsigned long	u32;
 
 u8 w2g_threshold_level=0;
 u8 w5g_threshold_level=0;
 u8 w2g_cur_temper=0;
 u8 w5g_cur_temper=0;
-u32 level_cpu_freq=1008000;
 
-/* default value of wifi thresholds*/
+
 #ifdef PLATFORM_RAP630C_311G
-u8 level_2g_high[4]={105, 110, 115, 120};
-u8 level_2g_low[4]={0, 105, 110, 115};
-u8 level_2g_mitigation[4]={0, 35, 50, 70};
-u8 level_5g_high[4]={105, 110, 115, 120};
-u8 level_5g_low[4]={0, 105, 110, 115};
-u8 level_5g_mitigation[4]={0, 20, 30, 50};
-u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
+u8 level_2g_lo[4]={0, 105, 110, 115};
+u8 level_2g_hi[4]={105, 110, 115, 120};
+u8 level_2g_limit[4]={0, 35, 50, 70};
+u8 level_5g_lo[4]={0, 105, 110, 115};
+u8 level_5g_hi[4]={105, 110, 115, 120};
+u8 level_5g_limit[4]={0, 20, 30, 50};
 #endif
 
 #ifdef PLATFORM_RAP630W_311G
-u8 level_2g_high[4]={105, 110, 115, 120};
-u8 level_2g_low[4]={0, 105, 110, 115};
-u8 level_2g_mitigation[4]={0, 20, 50, 70};
-u8 level_5g_high[4]={105, 110, 115, 120};
-u8 level_5g_low[4]={0, 105, 110, 115};
-u8 level_5g_mitigation[4]={0, 20, 50, 70};
-u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
+u8 level_2g_lo[4]={0, 105, 110, 115};
+u8 level_2g_hi[4]={105, 110, 115, 120};
+u8 level_2g_limit[4]={0, 20, 50, 70};
+u8 level_5g_lo[4]={0, 105, 110, 115};
+u8 level_5g_hi[4]={105, 110, 115, 120};
+u8 level_5g_limit[4]={0, 20, 50, 70};
 #endif
 
 static char *config_file = NULL;
+char temp[4][BUF_MAX];
 
-typedef struct {
-    int thresholds_high[NUM_VALUES];
-    int thresholds_low[NUM_VALUES];
-    int mitigation[NUM_VALUES];
-    int cpu_freq[NUM_VALUES];
-} WifiConfig;
+#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
 
-WifiConfig wifi2g = {0}, wifi5g = {0};
-
-static void set_cpu_freq (int freq) {
-	FILE * fp;
-	char filename[PATH_MAX];
-
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_governor");
-
-	fp = fopen(filename, "w");
-	if (!fp) {
-		ULOG_ERR("open scaling_governor error\n");
-	}
-	fprintf(fp, "%s", "userspace");
-	fclose(fp);
-
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_setspeed");
-
-	fp = fopen(filename, "w");
-	if (!fp) {
-		ULOG_ERR("open scaling_setspeed error\n");
-	}
-	fprintf(fp, "%d", freq);
-	fclose(fp);
-}
-
-void parse_line(const char* line, const char* key, int* array) {
-	char label[64];
-	int values[NUM_VALUES];
-	int i;
-
-	if (sscanf(line, "%s %d %d %d %d %d", label, &values[0], &values[1], &values[2], &values[3], &values[4]) == 5) {
-		for (i = 0; i < NUM_VALUES; ++i) {
-			array[i] = values[i];
-		}
-	}
-}
-
-int load_config() {
-	FILE * fp = fopen(config_file, "r");
-	if (!fp) {
-		ULOG_ERR("open config file error\n");
-		return 1;
-	}
-
-	WifiConfig* current_config = NULL;
-	char line[256];
-
-	while (fgets(line, sizeof(line), fp)) {
-		if (strstr(line, "[wifi2g]")) {
-			current_config = &wifi2g;
-		} else if (strstr(line, "[wifi5g]")) {
-			current_config = &wifi5g;
-		} else if (current_config) {
-			if (strstr(line, "thresholds_high")) {
-				parse_line(line, "thresholds_high", current_config->thresholds_high);
-			} else if (strstr(line, "thresholds_low")) {
-				parse_line(line, "thresholds_low", current_config->thresholds_low);
-			} else if (strstr(line, "mitigation")) {
-				parse_line(line, "mitigation", current_config->mitigation);
-			} else if (strstr(line, "CPU_freq")) {
-				parse_line(line, "CPU_freq", current_config->cpu_freq);
-			}
-		}
-	}
-
-	fclose(fp);
-	set_cpu_freq(wifi5g.cpu_freq[0]);
-
-	return 0;
-}
-
-int load_default_config(){
-	int i=0;
-
-	set_cpu_freq(1008000);
-	for (i = 0; i < NUM_VALUES; i++) {
-		wifi2g.thresholds_high[i]=level_2g_high[i];
-		wifi2g.thresholds_low[i]=level_2g_low[i];
-		wifi2g.mitigation[i]=level_2g_mitigation[i];
-		wifi2g.cpu_freq[i]=level_cpu_frequency[i];
-		wifi5g.thresholds_high[i]=level_5g_high[i];
-		wifi5g.thresholds_low[i]=level_5g_low[i];
-		wifi5g.mitigation[i]=level_5g_mitigation[i];
-		wifi5g.cpu_freq[i]=level_cpu_frequency[i];
-	}
-	return 0;
-
-}
-
-static void write_cur_state (const char *filename, int state) {
+static void write_cur_state (char *filename, int state) {
 	FILE * fp;
 
+	ULOG_DBG("write_cur_state filename=[%s] [%d]\n", filename, state);
 	fp = fopen(filename, "w");
 	if (!fp){
-		ULOG_ERR("open %s file error\n",filename);
+		ULOG_ERR("some kind of error write cur_state\n");
 	}
 	fprintf(fp, "%d", state);
 	fclose(fp);
 }
 
-int read_cur_state(const char *filename, char *buf, size_t buffer) {
-	FILE *fp;
-	
+static void read_cur_state (char *filename, char *buffer) {
+	FILE * fp;
+
 	fp = fopen(filename, "r");
-	if (!fp) {
-		ULOG_ERR("open %s file error\n",filename);
-		return -1;
+	if (!fp){
+		ULOG_ERR("some kind of error write cur_state\n");
 	}
-	if (!fgets(buf, buffer, fp)) {
-		ULOG_ERR("Failed to read %s file\n", filename);
-		fclose(fp);
-		return -1;
+	if (0 == fread(buffer, sizeof(char), 3, fp)) {
+		ULOG_ERR("some kind of error read value\n");
 	}
 	fclose(fp);
-	return 0;
 }
 
-
 static void wifi_get_temperature() {
 	char filename[PATH_MAX];
-	char buffer[BUF_MAX];
+	FILE * fp;
 	int i = 0;
-
-//	ULOG_INFO("=================================\n");
-
-	/* read cpuinfo_cur_freq*/
-	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "cpuinfo_cur_freq");
-
-	memset(buffer, 0, BUF_MAX);
-	read_cur_state(filename, buffer, sizeof(buffer));
-//	ULOG_INFO("CPU current frequency: %s\n", buffer);
+	char buffer[BUF_MAX];
 
 	/* get current phy cooling state*/
-	for (i=0; i <= 1; i++) {
+	for (i=0 ; i <= 1; i++ ) {
 		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
-		read_cur_state(filename, buffer, sizeof(buffer));
-//		ULOG_INFO("Phy%i cur_state is: %s\n", i, buffer);
+		read_cur_state(filename, buffer);
+		ULOG_DBG("read from Phy%i cur_state is %s\n", i, buffer);
 	}
 
-	for (i=0; i <= 3; i++) {
-		memset(buffer, 0, BUF_MAX);
+	for (i=0 ; i <= 3; i++ ) {
 		snprintf(filename, PATH_MAX, TEMPER_PATH, i);
-		read_cur_state(filename, buffer, sizeof(buffer));
-//		ULOG_INFO("thermal_zone%i cur_temp is: %s\n", i, buffer);
-
-		if (i == 0)
-			w2g_cur_temper=atoi(buffer);
-		else if (i == 3)
-			w5g_cur_temper=atoi(buffer);
-	}
-
-	if (w5g_cur_temper >= 120)
-	{
-		ULOG_ERR("!! Temperature is over %d degree, system will reboot\n", w5g_cur_temper);
-		sync();
-		if ( -1 != system("reboot &") ){
-			printf("sysyem reboot...\n");
+		fp = fopen(filename, "r");
+		if (!fp) {
+			ULOG_ERR("some kind of error open value\n");
 		}
+		memset(temp[i], 0, BUF_MAX);
+		if (0 == fread(temp[i], sizeof(char), 3, fp)) {
+			ULOG_ERR("some kind of error read value\n");
+		}
+		fclose(fp);
+		ULOG_DBG("thermal_zone%i cur_temp is %s\n", i, temp[i]);
 	}
+
+	w2g_cur_temper=atoi(temp[0]);
+	w5g_cur_temper=atoi(temp[3]);
 }
 
 static void wifi_set_cooling() {
 	char filename[PATH_MAX];
 	int level;
 
-	for (level = 0; level <= 3; level++) {
-		if (w2g_cur_temper >= wifi2g.thresholds_low[level] && w2g_cur_temper < wifi2g.thresholds_high[level]) {
-//			ULOG_INFO("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
+	for (level=0 ; level<=3 ; level++) {
+		if (w2g_cur_temper >= level_2g_lo[level] && w2g_cur_temper < level_2g_hi[level]) {
+			ULOG_DBG("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
 			if (w2g_threshold_level != level) {
-//				ULOG_INFO("setting 2G reduce %d percent\n" ,wifi2g.mitigation[level]);
+				ULOG_DBG("setting 2G reduce %d percent\n" ,level_2g_limit[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY0);
-				write_cur_state(filename, wifi2g.mitigation[level]);
+				write_cur_state(filename, level_2g_limit[level]);
 				w2g_threshold_level = level;
 			}
 		}
-		if (w5g_cur_temper >= wifi5g.thresholds_low[level] && w5g_cur_temper < wifi5g.thresholds_high[level]) {
-//			ULOG_INFO("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
+		if (w5g_cur_temper >= level_5g_lo[level] && w5g_cur_temper < level_5g_hi[level]) {
+			ULOG_DBG("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
 			if (w5g_threshold_level != level) {
-//				ULOG_INFO("setting 5G reduce %d percent\n" ,wifi5g.mitigation[level]);
+				ULOG_DBG("setting 5G reduce %d percent\n" ,level_5g_limit[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY1);
-				write_cur_state(filename, wifi5g.mitigation[level]);
+				write_cur_state(filename, level_5g_limit[level]);
 				w5g_threshold_level = level;
-				set_cpu_freq(wifi5g.cpu_freq[level]);
 			}
 		}
 	}
-
 }
 
-
 static void cooling_init() {
-	char filename[PATH_MAX];
-	int i,result=0;
+	char filename[256];
+	int i;
 
 	for (i=0 ; i <= 1; i++) {
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
 		write_cur_state(filename, 0);
 	}
-
-	if(load_config_file)
-		result = load_config();
-
-	if (result == 1 || load_config_file == 0)
-		load_default_config();
 }
 
 void print_usage(void)
 {
 	printf("\nWifi-cooling daemon usage\n");
 	printf("Optional arguments:\n");
-	printf("  -c <file>        setting with config file\n");
-	printf("  -d               default setting\n");
+	printf("  -c <file>        config file\n");
+	printf("  -d               debug output\n");
 	printf("  -h               this usage screen\n");
 }
 
@@ -312,18 +185,17 @@ int main(int argc, char *argv[])
 	setpriority(PRIO_PROCESS, getpid(), -20);
 
 	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "cooling");
-	ulog_threshold(LOG_ERR);
-//	ulog_threshold(LOG_INFO);
+	ulog_threshold(LOG_INFO);
 
- 	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
+	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
 		switch (ch) {
 		case 'c':
 			printf("wifi-cooling load configuration file %s\n", optarg);
 			config_file = optarg;
-			load_config_file=1;
 			break;
 		case 'd':
-			printf("wifi-cooling set to default value\n");
+			printf("wifi-cooling ulog_threshold set to debug level\n");
+			ulog_threshold(LOG_DEBUG);
 			break;
 		case 'h':
 		default:
@@ -340,4 +212,4 @@ int main(int argc, char *argv[])
 	uloop_done();
 
 	return 0;
-}
+}

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630c-311g-cooling.conf

@@ -1,11 +1,15 @@
-[wifi2g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           35          50          70
-CPU_freq            1008000     800000      800000      800000
+sampling 5000
 
-[wifi5g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          30          50
-CPU_freq            1008000     800000      800000      800000
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds 			105			110			115			119			120
+thresholds_clr 		0			100			105			110			115
+actions 			cooling		cooling	 	cooling		cooling		shutdown
+action_info 		0			35	 		50			70			800000
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds 			105			110			115			119			120
+thresholds_clr 		0			100			105			110			115
+actions 			cooling		cooling		cooling		cooling		shutdown
+action_info 		0			20			30	 		50			800000

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630w-311g-cooling.conf

@@ -1,11 +1,15 @@
-[wifi2g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          50          70
-CPU_freq            1008000     800000      800000      800000
+sampling 5000
 
-[wifi5g]
-thresholds_high     105         110         115         120
-thresholds_low      0           105         110         115
-mitigation          0           20          50          70
-CPU_freq            1008000     800000      800000      800000
+[tsens_tz_sensor1]
+sampling 	5000
+thresholds 			105			115			119			125
+thresholds_clr 		0			105			110			120
+actions 			cooling		cooling	 	cooling		cooling
+action_info 		0			20	 		50			70
+
+[tsens_tz_sensor4]
+sampling 	5000
+thresholds 			105			115			119			125
+thresholds_clr 		0			105			110			120
+actions 			cooling		cooling		cooling		cooling
+action_info 		0			20			50	 		70

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -117,6 +117,8 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -160,7 +162,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate maxassoc \
+		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -259,6 +261,8 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
+	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -468,9 +472,6 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
-
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -724,8 +725,7 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp multi_psk \
-		rssi_reject_assoc_rssi rssi_ignore_probe_request
+		vendor_elements fils uci_section dynamic_probe_resp multi_psk
 
 	set_default fils 0
 	set_default isolate 0
@@ -780,8 +780,6 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
-	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/ipq807x_v5.4/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
+			ssid.mpsk = config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
+	if (!is_ssid_mpsk(data.iface))
+		return;
+
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
-		if (!is_ssid_mpsk(data.iface))
-			return;
-
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
+		if (data.psk_idx == null)
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/ipq807x_v5.4/hostapd/patches/zzz-ignore-probe-event.patch

@@ -1,14 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
- 	int ubus_response;
- 
- 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
--	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
-+	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
-+		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
- 		return;
-+	}
- 
- 	if (len < IEEE80211_HDRLEN)
- 		return;

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1944,21 +1944,6 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
-{
-	if (!hapd->ubus.obj.has_subscribers)
-		return;
-
-	if (!addr)
-		return;
-
-	blob_buf_init(&b, 0);
-	blobmsg_add_macaddr(&b, "address", addr);
-	blobmsg_add_u32(&b, "rssi", rssi);
-
-	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
-}
-
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.h

@@ -56,7 +56,6 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
-void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -33,11 +33,6 @@ sonicfi,rap630c-311g|\
 sonicfi,rap630w-311g)
         ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
-sonicfi,rap630e)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
-	ucidef_set_led_default "power" "POWER" "green:power" "on"
-	;;
 edgecore,oap101|\
 edgecore,oap101-6e|\
 edgecore,oap101e|\
@@ -45,11 +40,6 @@ edgecore,oap101e-6e)
 	ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1"
         ucidef_set_led_default "power" "POWER" "blue:management" "on"
 	;;
-emplus,wap385c)
-	ucidef_set_led_default "ledr" "LEDR" "sys:red" "on"
-	ucidef_set_led_default "ledg" "LEDG" "sys:green" "on"
-	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
-	;;
 hfcl,ion4x_w|\
 hfcl,ion4xi_w)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -48,7 +48,6 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
 		ucidef_set_interface_wan "eth0"
@@ -68,13 +67,6 @@ qcom_setup_interfaces()
 	glinet,b3000)
 		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
-	sonicfi,rap630e)
-		ucidef_set_interface_wan "eth1"
-		ucidef_set_interface_lan "eth0"
-		;;
-	emplus,wap581)
-		ucidef_set_interface_wan "eth0 eth1"
-		;;
 	esac
 }
 
@@ -111,16 +103,6 @@ qcom_setup_macs()
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 2)
 		;;
-	sonicfi,rap630e)
-		mac=$(fw_printenv -n BaseMacAddress)
-		[ -z "$mac" ] && return;
-		lan_mac=$(macaddr_canonicalize $mac)
-		wan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth1 $wan_mac
-		ucidef_set_network_device_mac eth0 $lan_mac
-		ip link set eth1 address $wan_mac
-		ip link set eth0 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -94,15 +94,6 @@ ath11k_generate_macs_gl_b3000() {
 	}
 }
 
-ath11k_generate_macs_rap630e() {
-	touch /lib/firmware/ath11k-macs
-	eth=$(cat /sys/class/net/eth0/address)
-	mac1=$(macaddr_add $eth 2)
-	mac2=$(macaddr_add $eth 3)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 caldata_die() {
 	echo "caldata: " "$*"
 	exit 1
@@ -131,7 +122,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -139,7 +129,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
-	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	optimcloud,d60|\
@@ -150,7 +139,6 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	udaya,a6-od2|\
 	wallys,dr5018|\
 	yuncore,fap655|\
-	emplus,wap581|\
 	glinet,b3000)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -163,19 +151,16 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
-	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
 	wallys,dr5018|\
-	emplus,wap581|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;
@@ -191,7 +176,6 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
 		;;
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	glinet,b3000)
@@ -227,9 +211,6 @@ ath11k-macs)
 	cybertan,eww631-b1)
 		ath11k_generate_macs_eww631_b1
 		;;
-	sonicfi,rap630e)
-		ath11k_generate_macs_rap630e
-		;;
 	edgecore,eap104|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -73,11 +73,9 @@ platform_check_image() {
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
-	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
-	emplus,wap385c|\
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
@@ -92,7 +90,6 @@ platform_check_image() {
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
-	emplus,wap581|\
 	edgecore,oap101e-6e)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -132,7 +129,6 @@ platform_do_upgrade() {
                 ;;
 	cig,wf186w|\
 	cig,wf186h|\
-	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	wallys,dr5018|\
@@ -140,7 +136,6 @@ platform_do_upgrade() {
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
-	emplus,wap581|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
@@ -152,8 +147,7 @@ platform_do_upgrade() {
 	cybertan,eww631-b1|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630w-312g|\
-	sonicfi,rap630e)
+	sonicfi,rap630w-312g)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)
 			echo "Current bootfrom is $boot_part"
 			if [[ $boot_part == 1 ]]; then

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -450,8 +450,6 @@ CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_SAMA5D2_PIOBU is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_USB_DETECT is not set
-CONFIG_GPIO_WATCHDOG=y
-CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 # CONFIG_GSI is not set
 # CONFIG_HABANA_AI is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap385c.dts

@@ -1,760 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP385C";
-	compatible = "emplus,wap385c", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet1 = "/soc/dp1";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 23 0>;
-
-			ethernet-phy@0 {
-				reg = <24>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x18>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		wifi0: wifi@c000000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	poe_dc_pins: poe_dc_pins {
-		T2P_DET {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		12V_DET {
-			pins = "gpio32";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pinmux {
-		linux,phandle = <0x4d>;
-		phandle = <0x4d>;
-
-		led_G {
-			pins = "gpio24";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-
-		led_B {
-			pins = "gpio28";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-
-		led_R {
-			pins = "gpio38";
-			function = "gpio";
-			bias-pull-down;
-			drive-strength = <0x08>;
-		};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led@24 {
-			label = "sys:green";
-			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led@28 {
-			label = "sys:blue";
-			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		led_power: led@38 {
-			label = "sys:red";
-			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap385c:sys:red";
-			default-state = "on";
-		};
-	};
-
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-			"gcc_wcss_acmt_clk",
-			"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "ok";
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts

@@ -1,831 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP581";
-	compatible = "emplus,wap581", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*		   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	   8MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D300000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E200000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F000000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*		 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |	  |	      |			 |
-	 * |  Region  | Start Offset |	  Size	   |
-	 * |	  |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |	  16MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |	   4MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |	      |			 |
-	 * |   code/  |  0x4B000000  |	  20MB	   |
-	 * |   data   |	      |			 |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   data   |  0x4C400000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |   QDSS   |  0x4D200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |	      |			 |
-	 * |  Caldb   |  0x4D300000  |	   2MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   data   |  0x4D500000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |   QDSS   |  0x4E300000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|	      |			 |
-	 * |  Caldb   |  0x4E400000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   data   |  0x4E900000  |	  13MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |   QDSS   |  0x4F700000  |	   1MB	   |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|	      |			 |
-	 * |  Caldb   |  0x4F800000  |	   5MB	   |
-	 * +----------+--------------+-------------------------+
-	 * |						   |
-	 * |	    Rest of the memory for Linux	   |
-	 * |						   |
-	 * +===================================================+
-	 */
-
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			ethernet-phy@1 {
-				reg = <1>;
-			};
-
-			ethernet-phy@2 {
-				reg = <2>;
-			};
-
-			ethernet-phy@3 {
-				reg = <3>;
-			};
-
-			ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x2>;
-			ess-switch@0x39c00000 {
-				compatible = "qcom,ess-switch-ipq50xx";
-				device_id = <0>;
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-					};
-					port@1 {
-						port_id = <2>;
-						forced-speed = <1000>;
-						forced-duplex = <1>;
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-
-			ess-switch1@1 {
-				compatible = "qcom,ess-switch-qca83xx";
-				device_id = <1>;
-				switch_access_mode = "mdio";
-				mdio-bus = <&mdio1>;
-				reset_gpio = <&tlmm 0x27 0>;
-				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
-				switch_lan_bmp = <0x3e>; /* lan port bitmap */
-				switch_wan_bmp = <0x0>;  /* wan port bitmap */
-				qca,ar8327-initvals = <
-						0x00004 0x7600000   /* PAD0_MODE */
-						0x00008 0x1000000   /* PAD5_MODE */
-						0x0000c 0x80        /* PAD6_MODE */
-						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
-						0x000e4 0xaa545     /* MAC_POWER_SEL */
-						0x000e0 0xc74164de  /* SGMII_CTRL */
-						0x0007c 0x4e        /* PORT0_STATUS */
-						0x00094 0x4e        /* PORT6_STATUS */
-				>;
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <1>;
-					};
-					port@2 {
-						port_id = <3>;
-						phy_address = <2>;
-					};
-					port@3 {
-						port_id = <4>;
-						phy_address = <3>;
-					};
-					port@4 {
-						port_id = <5>;
-						phy_address = <4>;
-					};
-				};
-			};
-		};
-
-		wifi0: wifi@c000000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-				led@28 {
-					label = "led_blue";
-					gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-
-				led@38 {
-					label = "led_red";
-					gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-
-				led@46 {
-					label = "led_green";
-					gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-					default-state = "off";
-				};
-		};
-
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		lpass: lpass@0xA000000{
-			status = "disabled";
-		};
-
-		pcm_lb: pcm_lb@0 {
-			status = "disabled";
-		};
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};		
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_blue {
-			pins = "gpio28";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_red { /* POWER_LED */
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-
-		led_green { /* 2G_LED */
-			pins = "gpio46";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-
-
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-			<&wcss_smp2p_in 9 0>,
-			<&wcss_smp2p_in 12 0>,
-			<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-			"gcc_wcss_acmt_clk",
-			"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-			<&wcss_smp2p_out 9>,
-			<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-			<&wcss_smp2p_in 17 0>,
-			<&wcss_smp2p_in 20 0>,
-			<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-			"ready",
-			"spawn-ack",
-			"stop-ack";
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-			<&wcss_smp2p_out 17>,
-			<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-			"stop",
-			"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-	qcom,rproc = <&q6_wcss_pd1>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x23>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
-	qcom,rproc = <&q6_wcss_pd2>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x50>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
-	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data1>;
-#else
-	memory-region = <&q6_qcn6122_data1>;
-#endif
-	status = "ok";
-};
-
-&dwc_0 {
-	/delete-property/ #phy-cells;
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-	status = "ok";
-};
-
-&eud {
-	status = "ok";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-&pcie_x2 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-	status = "disabled";	
-};
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&qfprom {
-	status = "ok";
-};
-
-&tsens {
-	status = "ok";
-};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630e.dts

@@ -1,893 +0,0 @@
-/dts-v1/;
-/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
- *
- * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "ipq5018.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Sonicfi RAP630E";
-	compatible = "sonicfi,rap630e", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
-		serial0 = &blsp1_uart1;
-		serial1 = &blsp1_uart2;
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-	/*                   256 MB Profile
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |           8MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x40800000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D300000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E200000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4EF00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F000000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4100000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x1400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
-			no-map;
-			reg = <0x0 0x4E000000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
-			no-map;
-			reg = <0x0 0x4E100000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
-			no-map;
-			reg = <0x0 0x4EF00000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
-			no-map;
-			reg = <0x0 0x4F000000 0x0 0x100000>;
-		};
-	#else
-	/*                 512MB/1GB Profiles
-	 * +==========+==============+=========================+
-	 * |          |              |                         |
-	 * |  Region  | Start Offset |          Size           |
-	 * |          |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |    NSS   |  0x40000000  |          16MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   Linux  |  0x41000000  | Depends on total memory |
-	 * +----------+--------------+-------------------------+
-	 * |   uboot  |  0x4A600000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    SBL   |  0x4AA00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |   smem   |  0x4AB00000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    TZ    |  0x4AC00000  |           4MB           |
-	 * +----------+--------------+-------------------------+
-	 * |    Q6    |              |                         |
-	 * |   code/  |  0x4B000000  |          20MB           |
-	 * |   data   |              |                         |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D100000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D300000  |           2MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D500000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E200000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E300000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E400000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4E900000  |          13MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4F600000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4F700000  |           1MB           |
-	 * +----------+--------------+-------------------------+
-	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4F800000  |           5MB           |
-	 * +----------+--------------+-------------------------+
-	 * |                                                   |
-	 * |            Rest of the memory for Linux           |
-	 * |                                                   |
-	 * +===================================================+
-	 */
-		q6_mem_regions: q6_mem_regions@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 0x4D00000>;
-		};
-
-		q6_code_data: q6_code_data@4B000000 {
-			no-map;
-			reg = <0x0 0x4B000000 0x0 01400000>;
-		};
-
-		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
-			no-map;
-			reg = <0x0 0x4C400000 0x0 0xD00000>;
-		};
-
-		m3_dump: m3_dump@4D100000 {
-			no-map;
-			reg = <0x0 0x4D100000 0x0 0x100000>;
-		};
-
-		q6_etr_region: q6_etr_dump@4D200000 {
-			no-map;
-			reg = <0x0 0x4D200000 0x0 0x100000>;
-		};
-
-		q6_caldb_region: q6_caldb_region@4D300000 {
-			no-map;
-			reg = <0x0 0x4D300000 0x0 0x200000>;
-		};
-
-		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
-			no-map;
-			reg = <0x0 0x4D500000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
-			no-map;
-			reg = <0x0 0x4E200000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
-			no-map;
-			reg = <0x0 0x4E300000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
-			no-map;
-			reg = <0x0 0x4E400000 0x0 0x500000>;
-		};
-
-		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
-			no-map;
-			reg = <0x0 0x4E900000 0x0 0xD00000>;
-		};
-
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
-			no-map;
-			reg = <0x0 0x4F600000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
-			no-map;
-			reg = <0x0 0x4F700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
-			no-map;
-			reg = <0x0 0x4F800000 0x0 0x500000>;
-		};
-		ramoops: ramoops@50400000 {
-			compatible = "ramoops";
-			reg = <0x0 0x50400000 0x0 0x80000>; // 512KB
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			pmsg-size = <0x20000>;
-			no-map;
-		};
-
-	#endif
-	};
-
-	soc {
-		serial@78af000 {
-			status = "ok";
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			pinctrl-0 = <&blsp1_uart_pins>;
-			pinctrl-names = "default";
-		};
-
-		qpic_bam: dma@7984000{
-			status = "ok";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&qspi_nand_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-		};
-
-		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
-			pinctrl-0 = <&blsp0_spi_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-			status = "ok";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				linux,modalias = "m25p80", "n25q128a11";
-				spi-max-frequency = <50000000>;
-				use-default-sizes;
-			};
-		};
-
-		mdio0: mdio@88000 {
-			status = "ok";
-
-			ethernet-phy@0 {
-				reg = <7>;
-			};
-		};
-
-		mdio1: mdio@90000 {
-			status = "ok";
-			pinctrl-0 = <&mdio1_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 39 0>;
-
-			ethernet-phy@0 {
-				reg = <28>;
-			};
-		};
-
-		ess-instance {
-			num_devices = <0x1>;
-			ess-switch@0x39c00000 {
-				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
-				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
-				qcom,port_phyinfo {
-					port@0 {
-						port_id = <1>;
-						phy_address = <7>;
-						mdiobus = <&mdio0>;
-					};
-					port@1 {
-						port_id = <2>;
-						phy_address = <0x1c>;
-						mdiobus = <&mdio1>;
-						port_mac_sel = "QGMAC_PORT";
-					};
-				};
-				led_source@0 {
-					source = <0>;
-					mode = "normal";
-					speed = "all";
-					blink_en = "enable";
-					active = "high";
-				};
-			};
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <1>;
-			reg = <0x39C00000 0x10000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <7>;
-			mdio-bus = <&mdio0>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
-			clock-names = "nss-snoc-gmac-axi-clk";
-			qcom,id = <2>;
-			reg = <0x39D00000 0x10000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,mactype = <2>;
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			mdio-bus = <&mdio1>;
-			local-mac-address = [000000000000];
-			phy-mode = "sgmii";
-			qcom,rx-page-mode = <0>;
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio1>;
-		};
-
-		pcm: pcm@0xA3C0000{
-			pinctrl-0 = <&audio_pins>;
-			pinctrl-names = "default";
-		};
-
-	};
-
-	qcom,test@0 {
-		status = "ok";
-	};
-
-	thermal-zones {
-		status = "ok";
-	};
-};
-
-&tlmm {
-	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
-	pinctrl-names = "default";
-
-	blsp0_uart_pins: uart_pins {
-		blsp0_uart_rx_tx {
-			pins = "gpio20", "gpio21";
-			function = "blsp0_uart0";
-			bias-disable;
-		};
-	};
-
-	blsp1_uart_pins: blsp1_uart_pins {
-		blsp1_uart_rx_tx {
-			pins = "gpio22", "gpio24", "gpio23", "gpio25";
-			function = "blsp1_uart2";
-			bias-disable;
-		};
-	};
-
-	blsp0_spi_pins: blsp0_spi_pins {
-		mux {
-			pins = "gpio10", "gpio11", "gpio12", "gpio13";
-			function = "blsp0_spi";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	qspi_nand_pins: qspi_nand_pins {
-		qspi_clock {
-			pins = "gpio9";
-			function = "qspi_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_cs {
-			pins = "gpio8";
-			function = "qspi_cs";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		qspi_data {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			function = "qspi_data";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio36";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mux_1 {
-			pins = "gpio37";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_led_pins: phy_led_pins {
-		gephy_led_pin {
-			pins = "gpio46";
-			function = "led0";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	i2c_pins: i2c_pins {
-		i2c_scl {
-			pins = "gpio25";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		i2c_sda {
-			pins = "gpio26";
-			function = "blsp2_i2c1";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio38";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	audio_pins: audio_pinmux {
-	};
-
-	leds_pins: leds_pins {
-			led_5g {
-					pins = "gpio34";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_2g {
-					pins = "gpio33";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_sys {
-					pins = "gpio26";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-					};
-			led_onekey {
-					pins = "gpio28";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-			};
-	};
-};
-
-&soc {
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-	leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led34 {
-				label = "green:wifi5";
-				gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led33 {
-				label = "green:wifi2";
-				gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led_power: led26 {
-				label = "green:power";
-				gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "default-on";
-				default-state = "on";
-			};
-			led@28 {
-				label = "led_onekey";
-				gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
-				linux,default-trigger = "led_onekey";
-				default-state = "off";
-			};
-		};
-
-		gpio-watchdog {
-			compatible = "linux,wdt-gpio";
-            gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
-			hw_algo = "toggle";
-			hw_margin_ms = <5000>;
-			start-at-boot;
-			always-running;
-			status = "okay";
-		};
-};
-
-&q6v5_wcss {
-	compatible = "qcom,ipq5018-q6-mpd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	firmware = "IPQ5018/q6_fw.mdt";
-	reg = <0x0cd00000 0x4040>,
-		<0x1938000 0x8>,
-		<0x193d204 0x4>;
-	reg-names = "qdsp6",
-			"tcsr-msip",
-			"tcsr-q6";
-	resets = <&gcc GCC_WCSSAON_RESET>,
-			<&gcc GCC_WCSS_Q6_BCR>;
-
-	reset-names = "wcss_aon_reset",
-			"wcss_q6_reset";
-
-	clocks = <&gcc GCC_Q6_AXIS_CLK>,
-		<&gcc GCC_WCSS_ECAHB_CLK>,
-		<&gcc GCC_Q6_AXIM_CLK>,
-		<&gcc GCC_Q6_AXIM2_CLK>,
-		<&gcc GCC_Q6_AHB_CLK>,
-		<&gcc GCC_Q6_AHB_S_CLK>,
-		<&gcc GCC_WCSS_AXI_S_CLK>;
-	clock-names = "gcc_q6_axis_clk",
-		"gcc_wcss_ecahb_clk",
-		"gcc_q6_axim_clk",
-		"gcc_q6_axim2_clk",
-		"gcc_q6_ahb_clk",
-		"gcc_q6_ahb_s_clk",
-		"gcc_wcss_axi_s_clk";
-
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
-	#else
-		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
-				<&q6_caldb_region>;
-	#endif
-
-	qcom,rproc = <&q6v5_wcss>;
-	qcom,bootargs_smem = <507>;
-	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
-			<0x2 0x4 0x2 0x12 0x0 0x0>;
-	status = "ok";
-	q6_wcss_pd1: remoteproc_pd1@4ab000 {
-		compatible = "qcom,ipq5018-wcss-ahb-mpd";
-		reg = <0x4ab000 0x20>;
-		reg-names = "rmb";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "IPQ5018/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 8 0>,
-					<&wcss_smp2p_in 9 0>,
-					<&wcss_smp2p_in 12 0>,
-					<&wcss_smp2p_in 11 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		resets = <&gcc GCC_WCSSAON_RESET>,
-				<&gcc GCC_WCSS_BCR>,
-				<&gcc GCC_CE_BCR>;
-		reset-names = "wcss_aon_reset",
-				"wcss_reset",
-				"ce_reset";
-
-		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
-				<&gcc GCC_WCSS_ACMT_CLK>,
-				<&gcc GCC_WCSS_AXI_M_CLK>;
-		clock-names = "gcc_wcss_ahb_s_clk",
-					"gcc_wcss_acmt_clk",
-					"gcc_wcss_axi_m_clk";
-
-		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
-
-		qcom,smem-states = <&wcss_smp2p_out 8>,
-					<&wcss_smp2p_out 9>,
-					<&wcss_smp2p_out 10>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>;
-	#else
-		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
-				<&q6_etr_region>, <&q6_caldb_region>;
-	#endif
-
-	};
-
-	q6_wcss_pd2: remoteproc_pd2 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		m3_firmware = "qcn6122/m3_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 16 0>,
-					<&wcss_smp2p_in 17 0>,
-					<&wcss_smp2p_in 20 0>,
-					<&wcss_smp2p_in 19 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 16>,
-					<&wcss_smp2p_out 17>,
-					<&wcss_smp2p_out 18>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef __IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>;
-	#else
-		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
-				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
-	#endif
-
-	};
-
-	q6_wcss_pd3: remoteproc_pd3 {
-		compatible = "qcom,ipq5018-wcss-pcie-mpd";
-		firmware = "IPQ5018/q6_fw.mdt";
-		interrupts-extended = <&wcss_smp2p_in 24 0>,
-					<&wcss_smp2p_in 25 0>,
-					<&wcss_smp2p_in 28 0>,
-					<&wcss_smp2p_in 27 0>;
-		interrupt-names = "fatal",
-					"ready",
-					"spawn-ack",
-					"stop-ack";
-
-		qcom,smem-states = <&wcss_smp2p_out 24>,
-					<&wcss_smp2p_out 25>,
-					<&wcss_smp2p_out 26>;
-		qcom,smem-state-names = "shutdown",
-					"stop",
-					"spawn";
-	#ifdef	__IPQ_MEM_PROFILE_256_MB__
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>;
-	#else
-		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
-				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
-	#endif
-	};
-};
-
-&i2c_0 {
-	pinctrl-0 = <&i2c_pins>;
-	pinctrl-names = "default";
-};
-
-&wifi0 {
-	/* IPQ5018 */
-	qcom,multipd_arch;
-	qcom,rproc = <&q6_wcss_pd1>;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x24>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
-	qcom,caldb-size = <0x200000>;
-	mem-region = <&q6_ipq5018_data>;
-#else
-	memory-region = <&q6_ipq5018_data>;
-#endif
-	nss-radio-priority = <0>;
-	status = "ok";
-};
-
-&wifi1 {
-	/* QCN6122 5G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-	qcom,rproc = <&q6_wcss_pd3>;
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-#ifdef __CNSS2__
-	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
-	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
-	qcom,caldb-size = <0x500000>;
-	mem-region = <&q6_qcn6122_data2>;
-#else
-	memory-region = <&q6_qcn6122_data2>;
-#endif
-	nss-radio-priority = <1>;
-	status = "ok";
-};
-
-&wifi2 {
-	/* QCN6122 6G */
-	qcom,multipd_arch;
-	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
-#ifdef __IPQ_MEM_PROFILE_256_MB__
-	qcom,tgt-mem-mode = <2>;
-#else
-	qcom,tgt-mem-mode = <1>;
-#endif
-	qcom,board_id = <0x60>;
-	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
-#ifdef __CNSS2__
-	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
-#else
-	qcom,caldb-addr = <0x4FF00000>;
-	m3-dump-addr = <0x4FD00000>;
-	nss-radio-priority = <1>;
-#endif
-	mem-region = <&q6_qcn6122_data2>;
-	qcom,caldb-size = <0x500000>;
-	status = "disabled";
-};
-
-&dwc_0 {
-       /delete-property/ #phy-cells;
-       /delete-property/ phys;
-       /delete-property/ phy-names;
-};
-
-&hs_m31phy_0 {
-       status = "ok";
-};
-
-&eud {
-	status = "disabled";
-};
-
-&pcie_x1 {
-	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
-};
-
-&pcie_x2 {
-	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
-};
-
-
-&pcie_x1_rp {
-	status = "disabled";
-
-	mhi_0: qcom,mhi@0 {
-		reg = <0 0 0 0 0 >;
-	};
-};
-
-&pcie_x2_rp {
-	status = "disabled";
-
-	mhi_1: qcom,mhi@1 {
-		reg = <0 0 0 0 0 >;
-
-	};
-};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -73,17 +73,6 @@ define Device/sonicfi_rap630w_311g
 endef
 TARGET_DEVICES += sonicfi_rap630w_311g
 
-define Device/sonicfi_rap630e
-  DEVICE_TITLE := Sonicfi RAP630E
-  DEVICE_DTS := qcom-ipq5018-rap630e
-  SUPPORTED_DEVICES := sonicfi,rap630e
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630e ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
-  DEVICE_DTS_CONFIG := config@mp03.5-c1
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap630e
-
 define Device/edgecore_eap104
   DEVICE_TITLE := EdgeCore EAP104
   DEVICE_DTS := qcom-ipq5018-eap104
@@ -165,15 +154,6 @@ define Device/edgecore_oap101e_6e
 endef
 TARGET_DEVICES += edgecore_oap101e_6e
 
-define Device/emplus_wap385c
-  DEVICE_TITLE := Emplus WAP385C
-  DEVICE_DTS := qcom-ipq5018-emplus-wap385c
-  SUPPORTED_DEVICES := emplus,wap385c
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap385c ath11k-firmware-ipq50xx-map-spruce
-  DEVICE_DTS_CONFIG := config@mp03.3
-endef
-TARGET_DEVICES += emplus_wap385c
-
 define Device/hfcl_ion4x_w
   DEVICE_TITLE := HFCL ION4x_w
   DEVICE_DTS := qcom-ipq5018-hfcl-ion4x_w
@@ -239,16 +219,3 @@ define Device/glinet_b3000
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += glinet_b3000
-
-define Device/emplus_wap581
-  DEVICE_TITLE := Emplus WAP581
-  DEVICE_DTS := qcom-ipq5018-emplus-wap581
-  SUPPORTED_DEVICES := emplus,wap581
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap581 ath11k-firmware-ipq50xx-map-spruce
-  DEVICE_DTS_CONFIG := config@mp03.3
-  IMAGES := sysupgrade.tar nand-factory.bin
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand  
-endef
-TARGET_DEVICES += emplus_wap581
-

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds

@@ -26,12 +26,6 @@ edgecore,eap101)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
 	;;
-emplus,wap386v2)
-	ucidef_set_led_default "power" "POWER" "red:power" "on"
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
-	;;
 hfcl,ion4xi|\
 hfcl,ion4x|\
 hfcl,ion4x_2|\

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -34,10 +34,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-	cig,wf660a|\
-	emplus,wap386v2)
+       cig,wf660a)
 		ucidef_set_interface_wan "eth0"		
 		;;
+
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -76,9 +76,6 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ip link set eth0 address $wan_mac
 		;;
-	emplus,wap386v2)
-		wan_mac=$(cat /sys/class/net/eth0/address)
-		;;
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -76,7 +76,6 @@ case "$FIRMWARE" in
 	cig,wf188n|\
 	cig,wf660a|\
 	edgecore,eap101|\
-	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -110,8 +109,7 @@ ath11k-macs)
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
-	cig,wf188n|\
-	emplus,wap386v2)
+	cig,wf188n)
 		ath11k_generate_macs
 		;;
 	cig,wf660a)

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -122,7 +122,6 @@ platform_check_image() {
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
-	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -146,8 +145,7 @@ platform_do_upgrade() {
 	cig,wf660a)
 		spi_nor_emmc_do_upgrade_bootconfig $1
 		;;
-	cig,wf188n|\
-	emplus,wap386v2)
+	cig,wf188n)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
 			CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-emplus-wap386v2.dts

@@ -1,356 +0,0 @@
-/*
- * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "ipq6018.dtsi"
-#include "ipq6018-cpr-regulator.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Emplus WAP386 v2";
-	compatible = "emplus,wap386v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
-
-	aliases {
-		/*
-		 * Aliases as required by u-boot
-		 * to patch MAC addresses
-		 */
-		ethernet0 = "/soc/dp1";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-		bootargs-append = " swiotlb=1 coherent_pool=2M";
-	};
-
-	/*
-	 * +=========+==============+========================+
-	 * |        |              |                         |
-	 * | Region | Start Offset |          Size           |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * | Linux  |  0x41000000  |         139MB           |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * |        |              |                         |
-	 * +--------+--------------+-------------------------+
-	 * | TZ App |  0x49B00000  |           6MB           |
-	 * +--------+--------------+-------------------------+
-	 *
-	 * From the available 145 MB for Linux in the first 256 MB,
-	 * we are reserving 6 MB for TZAPP.
-	 *
-	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
-	 * for memory layout.
-	 */
-
-/* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
-	reserved-memory {
-		tzapp:tzapp@49B00000 {	/* TZAPPS */
-			no-map;
-			reg = <0x0 0x49B00000 0x0 0x00600000>;
-		};
-	};
-#endif
-};
-
-&tlmm {
-	gpio-reserved-ranges = <20 1>;
-
-	uart_pins: uart_pins {
-		mux {
-			pins = "gpio44", "gpio45";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pins {
-		mux {
-			pins = "gpio38", "gpio39", "gpio40", "gpio41";
-			function = "blsp0_spi";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	button_pins: button_pins {
-		reset_button {
-			pins = "gpio9";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_0 {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio75";
-			function = "gpio";
-			bias-pull-up;
-		};
-	};
-
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio31";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio30";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-};
-
-&soc {
-	mdio@90000 {
-		pinctrl-0 = <&mdio_pins>;
-		pinctrl-names = "default";
-		phy-reset-gpio = <&tlmm 75 0>;
-		status = "ok";
-		phy0: ethernet-phy@0 {
-			reg = <3>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <4>;
-		};
-	};
-
-	ess-switch@3a000000 {
-		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-		switch_lan_bmp = <0x08>; /* lan port bitmap */
-		switch_wan_bmp = <0x10>; /* wan port bitmap */
-		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
-		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
-		qcom,port_phyinfo {
-			port@0 {
-				port_id = <2>;
-				phy_address = <3>;
-			};
-			port@1 {
-				port_id = <3>;
-				phy_address = <4>;
-			};
-		};
-	};
-
-	dp1 {
-		device_type = "network";
-		compatible = "qcom,nss-dp";
-		qcom,id = <3>;
-		reg = <0x3a001400 0x200>;
-		qcom,mactype = <0>;
-		local-mac-address = [000000000000];
-		qcom,link-poll = <1>;
-		qcom,phy-mdio-addr = <4>;
-		phy-mode = "sgmii";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		button@9 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
-		pinctrl-names = "default";
-
-		led_power: led@28 {
-			label = "red:power";
-			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:red:power";
-			default-state = "on";
-		};
-		led@29 {
-			label = "blue:wan";
-			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:eth";
-			default-state = "on";
-		};
-		led@30 {
-			label = "blue:wifi2";
-			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:2g";
-			default-state = "on";
-		};
-		led@31 {
-			label = "blue:wifi5";
-			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "wap386v2:blue:5g";
-			default-state = "on";
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&uart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
-&spi_0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-select = <0>;
-	status = "ok";
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		compatible = "n25q128a11";
-		linux,modalias = "m25p80", "n25q128a11";
-		spi-max-frequency = <50000000>;
-		use-default-sizes;
-	};
-};
-
-&wifi0 {
-	qcom,board_id = <0x30>;
-};
-
-&pcie_phy {
-	status = "ok";
-};
-
-&pcie0 {
-#if defined(__CNSS2__)
-	status = "ok";
-#endif
-};
-
-&qpic_bam {
-	status = "ok";
-};
-
-&qpic_nand {
-	status = "ok";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&ssphy_0 {
-	status = "ok";
-};
-
-&nss_crypto {
-	status = "ok";
-};
-
-&CPU0 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU1 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU2 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&CPU3 {
-	operating-points = <
-		/* kHz   uV (fixed) */
-		864000   1100000
-		1056000  1100000
-		1320000  1100000
-		1440000  1100000
-		1608000  1100000
-		1800000  1100000
-	>;
-	clock-latency = <200000>;
-};
-
-&rpm_glink {
-	status = "disabled";
-};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -76,15 +76,6 @@ define Device/edgecore_eap101
 endef
 TARGET_DEVICES += edgecore_eap101
 
-define Device/emplus_wap386v2
-  DEVICE_TITLE := Emplus WAP386v2
-  DEVICE_DTS := qcom-ipq6018-emplus-wap386v2
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  SUPPORTED_DEVICES := emplus,wap386v2
-  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-env
-endef
-TARGET_DEVICES += emplus_wap386v2
-
 define Device/indio_um-310ax-v1
   DEVICE_TITLE := Indio UM-310AX V1
   DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -20,14 +20,7 @@ edgecore,oap103)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
-emplus,wap380c)
-	ucidef_set_led_default "power"  "POWER"  "ipq::led0" "on"
-	ucidef_set_led_netdev  "wan"    "WAN"    "ipq::led1" "eth0"
-	ucidef_set_led_wlan    "wlan2g" "WLAN2G" "ipq::led2" "phy1tpt"
-	ucidef_set_led_wlan    "wlan5g" "WLAN5G" "ipq::led3" "phy0tpt"
-	;;
 sonicfi,rap630w-311g|\
-sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -12,7 +12,6 @@ qcom_setup_interfaces()
 	ucidef_add_switch_attr "switch0" "reset" "false"
 
 	case $board in
-	emplus,wap380c|\
 	tplink,ex227|\
 	tplink,ex447)
 		ucidef_set_interface_wan "eth0"
@@ -25,7 +24,6 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
-	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -52,16 +50,6 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
-	sonicfi,rap650c)
-		mac=$(fw_printenv -n BaseMacAddress)
-		[ -z "$mac" ] && return;
-		wan_mac=$(macaddr_canonicalize $mac)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		ucidef_set_network_device_mac eth0 $wan_mac
-		ucidef_set_network_device_mac eth1 $lan_mac
-		ip link set eth0 address $wan_mac
-		ip link set eth1 address $lan_mac
-		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,20 +16,6 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
-ath11k_generate_macs_rap650c() {
-	mac=$(fw_printenv -n BaseMacAddress)
-	[ -z "$mac" ] && return;
-
-	touch /lib/firmware/ath11k-macs
-	eth=$(macaddr_canonicalize $mac)
-	mac1=$(macaddr_add $eth 3)
-	mac2=$(macaddr_add $eth 2)
-	mac3=$(macaddr_add $eth 4)
-	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
-	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
-}
-
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -72,13 +58,11 @@ case "$FIRMWARE" in
 	edgecore,oap102 |\
 	edgecore,oap103 |\
 	edgecore,eap106 |\
-	emplus,wap380c|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
-	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -113,9 +97,6 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
-	sonicfi,rap650c)
-		ath11k_generate_macs_rap650c
-		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,8 +10,7 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103"|\
-    "sonicfi,rap650c")
+    "edgecore,oap103")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,8 +29,6 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
-	emplus,wap380c|\
-	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -49,8 +47,7 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
-	cig,wf196|\
-	emplus,wap380c)
+        cig,wf196)
                 [ -f /proc/boot_info/rootfs/upgradepartition ] && {
                         CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
                         CI_BOOTCFG=1
@@ -86,17 +83,5 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
-	sonicfi,rap650c)
-		boot_part=$(fw_printenv -n bootfrom)
-		[ ${#boot_part} -eq 0 ] && boot_part=0
-		echo "Current bootfrom is $boot_part"
-		if [[ $boot_part == 1 ]]; then
-			CI_UBIPART="rootfs"
-			CI_FWSETENV="bootfrom 0"
-		elif [[ $boot_part == 0 ]]; then
-			CI_UBIPART="rootfs_1"
-			CI_FWSETENV="bootfrom 1"
-		fi
-		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -1,650 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
-#include "ipq8074.dtsi"
-#include "ipq8074-hk-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "SonicFi RAP650C";
-	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
-	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp1";
-		ethernet1 = "/soc/dp2";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		pinctrl@1000000 {
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio57";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			usb_mux_sel_pins: usb_mux_pins {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			pcie0_pins: pcie_pins {
-				pcie0_rst {
-					pins = "gpio58";
-					function = "pcie0_rst";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				pcie0_wake {
-					pins = "gpio59";
-					function = "pcie0_wake";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio25";
-					function = "gpio";
-					bias-pull-up;
-				};
-				mux_3 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-
-			led_pins: led_pins {
-				red {
-					pins = "gpio0";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				green {
-					pins = "gpio2";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-
-				blue {
-					pins = "gpio9";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-			};
-
-			spi_3_pins: spi_3_pins {
-				mux {
-					pins = "gpio50", "gpio52", "gpio53";
-					function = "blsp3_spi";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				spi_cs {
-					pins = "gpio22";
-					function = "blsp3_spi2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				quartz_interrupt {
-					pins = "gpio47";
-					function = "gpio";
-					input;
-					bias-disable;
-				};
-				quartz_reset {
-					pins = "gpio21";
-					function = "gpio";
-					output-low;
-					bias-disable;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		dp1 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <5>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <24>;
-			phy-mode = "sgmii";
-		};
-
-		dp2 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001a00 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		spi@78b8000 {
-			status = "ok";
-			pinctrl-0 = <&spi_3_pins>;
-			pinctrl-names = "default";
-			cs-select = <2>;
-			quartz-reset-gpio = <&tlmm 21 1>;
-
-			spidev3: spi@3 {
-				  compatible = "qti,spidev";
-				  reg = <0>;
-				  spi-max-frequency = <24000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		qusb@79000 {
-			status = "ok";
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		usb3@8A00000 {
-			status = "ok";
-		};
-
-		qusb@59000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		usb3@8C00000 {
-			status = "ok";
-		};
-
-		phy@84000 {
-			status = "ok";
-		};
-
-		phy@86000 {
-			status = "ok";
-		};
-
-		pci@20000000 {
-			perst-gpio = <&tlmm 58 1>;
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-
-			red {
-				label = "sys:red";
-				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			green {
-				label = "sys:green";
-				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led_power: blue {
-				label = "sys:blue";
-				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <24>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <24>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		nss-macsec0 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x18>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			phy_access_mode = <0>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&wifi0 {
-	qcom,board_id = <0x90>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x290>;
-};

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts

@@ -1,648 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
- */
-#include "ipq8074.dtsi"
-#include "ipq8074-ac-cpu.dtsi"
-
-/ {
-	#address-cells = <0x2>;
-	#size-cells = <0x2>;
-	model = "Emplus WAP380C";
-	compatible = "emplus,wap380c", "qcom,ipq8074-ap-hk07", "qcom,ipq8074";
-	qcom,msm-id = <0x143 0x0>;
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &blsp1_uart5;
-		/* Aliases as required by u-boot to patch MAC addresses */
-		ethernet0 = "/soc/dp6";
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	soc {
-		qti: ledc@191E000  {
-			compatible = "qti,ledc";
-			reg = <0x191E000 0x20070>;
-			reg-names = "ledc_base_addr";
-			qti,tcsr_ledc_values = <0x0320193 0x00000000 \
-									0x00000000 0x00000000 \
-									0x00000000 0xFFFFFFFF \
-									0xFFFF7FFF 0xFFFFFFFF \
-									0x007D0820 0x00000000 \
-									0x10482094 0x03FFFFE1>;
-			qti,ledc_blink_indices_cnt = <6>;
-			qti,ledc_blink_indices = <15 14 13 12 11 10>;
-			qti,ledc_blink_idx_src_pair = <5 20>;
-			status = "ok";
-		};
-
-		pinctrl@1000000 {
-			button_pins: button_pins {
-				reset_button {
-					pins = "gpio52";
-					function = "gpio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			mdio_pins: mdio_pinmux {
-				mux_0 {
-					pins = "gpio68";
-					function = "mdc";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_1 {
-					pins = "gpio69";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio44";
-					function = "gpio";
-					bias-pull-up;
-				};
-			};
-
-			ledc_pins: ledc_pinmux {
-				led_clk {
-					pins = "gpio18";
-					function = "led0";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				led_data {
-					pins = "gpio19";
-					function = "led1";
-					drive-strength = <8>;
-					bias-pull-down;
-				};
-				led_clr {
-					pins = "gpio20";
-					function = "led2";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		serial@78b3000 {
-			status = "ok";
-		};
-
-		spi@78b5000 {
-			status = "ok";
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			cs-select = <0>;
-
-			m25p80@0 {
-				  compatible = "n25q128a11";
-				  #address-cells = <1>;
-				  #size-cells = <1>;
-				  reg = <0>;
-				  spi-max-frequency = <50000000>;
-			};
-		};
-
-		dma@7984000 {
-			 status = "ok";
-		};
-
-		nand@79b0000 {
-			status = "ok";
-
-			nand@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				nand-bus-width = <8>;
-			};
-		};
-
-		ssphy@78000 {
-			status = "ok";
-		};
-
-		ssphy@58000 {
-			status = "ok";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&button_pins>;
-			pinctrl-names = "default";
-			status = "ok";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		mdio: mdio@90000 {
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 43 1 &tlmm 44 1>;
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <4>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <28>;
-			};
-		};
-
-		ess-switch@3a000000 {
-			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
-			switch_lan_bmp = <0x3e>; /* lan port bitmap */
-			switch_wan_bmp = <0x40>; /* wan port bitmap */
-			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
-			switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
-			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
-			bm_tick_mode = <0>; /* bm tick mode */
-			tm_tick_mode = <0>; /* tm tick mode */
-			qcom,port_phyinfo {
-				port@0 {
-					port_id = <1>;
-					phy_address = <0>;
-				};
-				port@1 {
-					port_id = <2>;
-					phy_address = <1>;
-				};
-				port@2 {
-					port_id = <3>;
-					phy_address = <2>;
-				};
-				port@3 {
-					port_id = <4>;
-					phy_address = <3>;
-				};
-				port@4 {
-					port_id = <5>;
-					phy_address = <4>;
-				};
-				port@5 {
-					port_id = <6>;
-					phy_address = <28>;
-					port_mac_sel = "QGMAC_PORT";
-				};
-			};
-			port_scheduler_resource {
-				port@0 {
-					port_id = <0>;
-					ucast_queue = <0 143>;
-					mcast_queue = <256 271>;
-					l0sp = <0 35>;
-					l0cdrr = <0 47>;
-					l0edrr = <0 47>;
-					l1cdrr = <0 7>;
-					l1edrr = <0 7>;
-				};
-				port@1 {
-					port_id = <1>;
-					ucast_queue = <144 159>;
-					mcast_queue = <272 275>;
-					l0sp = <36 39>;
-					l0cdrr = <48 63>;
-					l0edrr = <48 63>;
-					l1cdrr = <8 11>;
-					l1edrr = <8 11>;
-				};
-				port@2 {
-					port_id = <2>;
-					ucast_queue = <160 175>;
-					mcast_queue = <276 279>;
-					l0sp = <40 43>;
-					l0cdrr = <64 79>;
-					l0edrr = <64 79>;
-					l1cdrr = <12 15>;
-					l1edrr = <12 15>;
-				};
-				port@3 {
-					port_id = <3>;
-					ucast_queue = <176 191>;
-					mcast_queue = <280 283>;
-					l0sp = <44 47>;
-					l0cdrr = <80 95>;
-					l0edrr = <80 95>;
-					l1cdrr = <16 19>;
-					l1edrr = <16 19>;
-				};
-				port@4 {
-					port_id = <4>;
-					ucast_queue = <192 207>;
-					mcast_queue = <284 287>;
-					l0sp = <48 51>;
-					l0cdrr = <96 111>;
-					l0edrr = <96 111>;
-					l1cdrr = <20 23>;
-					l1edrr = <20 23>;
-				};
-				port@5 {
-					port_id = <5>;
-					ucast_queue = <208 223>;
-					mcast_queue = <288 291>;
-					l0sp = <52 55>;
-					l0cdrr = <112 127>;
-					l0edrr = <112 127>;
-					l1cdrr = <24 27>;
-					l1edrr = <24 27>;
-				};
-				port@6 {
-					port_id = <6>;
-					ucast_queue = <224 239>;
-					mcast_queue = <292 295>;
-					l0sp = <56 59>;
-					l0cdrr = <128 143>;
-					l0edrr = <128 143>;
-					l1cdrr = <28 31>;
-					l1edrr = <28 31>;
-				};
-				port@7 {
-					port_id = <7>;
-					ucast_queue = <240 255>;
-					mcast_queue = <296 299>;
-					l0sp = <60 63>;
-					l0cdrr = <144 159>;
-					l0edrr = <144 159>;
-					l1cdrr = <32 35>;
-					l1edrr = <32 35>;
-				};
-			};
-			port_scheduler_config {
-				port@0 {
-					port_id = <0>;
-					l1scheduler {
-						group@0 {
-							sp = <0 1>; /*L0 SPs*/
-							/*cpri cdrr epri edrr*/
-							cfg = <0 0 0 0>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							/*unicast queues*/
-							ucast_queue = <0 4 8>;
-							/*multicast queues*/
-							mcast_queue = <256 260>;
-							/*sp cpri cdrr epri edrr*/
-							cfg = <0 0 0 0 0>;
-						};
-						group@1 {
-							ucast_queue = <1 5 9>;
-							mcast_queue = <257 261>;
-							cfg = <0 1 1 1 1>;
-						};
-						group@2 {
-							ucast_queue = <2 6 10>;
-							mcast_queue = <258 262>;
-							cfg = <0 2 2 2 2>;
-						};
-						group@3 {
-							ucast_queue = <3 7 11>;
-							mcast_queue = <259 263>;
-							cfg = <0 3 3 3 3>;
-						};
-					};
-				};
-				port@1 {
-					port_id = <1>;
-					l1scheduler {
-						group@0 {
-							sp = <36>;
-							cfg = <0 8 0 8>;
-						};
-						group@1 {
-							sp = <37>;
-							cfg = <1 9 1 9>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <144>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <272>;
-							mcast_loop_pri = <4>;
-							cfg = <36 0 48 0 48>;
-						};
-					};
-				};
-				port@2 {
-					port_id = <2>;
-					l1scheduler {
-						group@0 {
-							sp = <40>;
-							cfg = <0 12 0 12>;
-						};
-						group@1 {
-							sp = <41>;
-							cfg = <1 13 1 13>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <160>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <276>;
-							mcast_loop_pri = <4>;
-							cfg = <40 0 64 0 64>;
-						};
-					};
-				};
-				port@3 {
-					port_id = <3>;
-					l1scheduler {
-						group@0 {
-							sp = <44>;
-							cfg = <0 16 0 16>;
-						};
-						group@1 {
-							sp = <45>;
-							cfg = <1 17 1 17>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <176>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <280>;
-							mcast_loop_pri = <4>;
-							cfg = <44 0 80 0 80>;
-						};
-					};
-				};
-				port@4 {
-					port_id = <4>;
-					l1scheduler {
-						group@0 {
-							sp = <48>;
-							cfg = <0 20 0 20>;
-						};
-						group@1 {
-							sp = <49>;
-							cfg = <1 21 1 21>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <192>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <284>;
-							mcast_loop_pri = <4>;
-							cfg = <48 0 96 0 96>;
-						};
-					};
-				};
-				port@5 {
-					port_id = <5>;
-					l1scheduler {
-						group@0 {
-							sp = <52>;
-							cfg = <0 24 0 24>;
-						};
-						group@1 {
-							sp = <53>;
-							cfg = <1 25 1 25>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <208>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <288>;
-							mcast_loop_pri = <4>;
-							cfg = <52 0 112 0 112>;
-						};
-					};
-				};
-				port@6 {
-					port_id = <6>;
-					l1scheduler {
-						group@0 {
-							sp = <56>;
-							cfg = <0 28 0 28>;
-						};
-						group@1 {
-							sp = <57>;
-							cfg = <1 29 1 29>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <224>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <292>;
-							mcast_loop_pri = <4>;
-							cfg = <56 0 128 0 128>;
-						};
-					};
-				};
-				port@7 {
-					port_id = <7>;
-					l1scheduler {
-						group@0 {
-							sp = <60>;
-							cfg = <0 32 0 32>;
-						};
-						group@1 {
-							sp = <61>;
-							cfg = <1 33 1 33>;
-						};
-					};
-					l0scheduler {
-						group@0 {
-							ucast_queue = <240>;
-							ucast_loop_pri = <16>;
-							mcast_queue = <296>;
-							cfg = <60 0 144 0 144>;
-						};
-					};
-				};
-			};
-		};
-
-		dp6 {
-			device_type = "network";
-			compatible = "qcom,nss-dp";
-			qcom,id = <6>;
-			reg = <0x3a001800 0x200>;
-			qcom,mactype = <0>;
-			local-mac-address = [000000000000];
-			qcom,link-poll = <1>;
-			qcom,phy-mdio-addr = <28>;
-			phy-mode = "sgmii";
-		};
-
-		nss-macsec1 {
-			compatible = "qcom,nss-macsec";
-			phy_addr = <0x1c>;
-			mdiobus = <&mdio>;
-		};
-	};
-};
-
-&apc_cpr {
-	/* Same CPR configuration as OAK */
-	compatible = "qcom,cpr4-ipq817x-apss-regulator";
-
-	thread@0 {
-		apc_vreg: regulator {
-			regulator-min-microvolt = <1>;
-			regulator-max-microvolt = <2>;
-			qcom,cpr-fuse-corners = <2>;
-			qcom,cpr-corners = <3>;
-			qcom,cpr-speed-bin-corners = <3>;
-			qcom,cpr-corner-fmax-map = <1 3>;
-
-			qcom,cpr-voltage-ceiling =
-				<840000 904000 944000>;
-			qcom,cpr-voltage-floor =
-				<592000 648000 712000>;
-			qcom,corner-frequencies =
-				<1017600000 1382400000 1382400000>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>,
-				< 0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				< 20000  26000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
-				/* Speed bin 0; CPR rev 0..7 */
-				<     0      0>,
-				<     0   7000>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>,
-				<     0      0>;
-
-			qcom,cpr-floor-to-ceiling-max-range =
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>,
-				< 40000 40000 40000>;
-		};
-	};
-};
-
-&npu_cpr {
-	status = "disabled";
-};
-
-&nss0 {
-	qcom,low-frequency = <187200000>;
-	qcom,mid-frequency = <748800000>;
-	qcom,max-frequency = <1497600000>;
-};
-
-&nss0 {
-	npu-supply = <&dummy_reg>;
-	mx-supply = <&dummy_reg>;
-};
-
-&wifi0 {
-	qcom,board_id = <0x92>;
-};
-
-&wifi1 {
-	qcom,board_id = <0x290>;
-};
-
-&ledc {
-	pinctrl-0 = <&ledc_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-
-	led_power: led0 {
-		label = "ipq::led0";
-		linux,default-trigger = "default-on";
-	};
-
-	wan: led1 {
-		label = "ipq::led1";
-		linux,default-trigger = "netdev";
-	};
-
-	wifi2g: led2 {
-		label = "ipq::led2";
-		linux,default-trigger = "phy1tpt";
-	};
-
-	wifi5g: led3 {
-		label = "ipq::led3";
-		linux,default-trigger = "phy0tpt";
-	};
-
-	led4 {
-		label = "ipq::led4";
-		linux,default-trigger = "none";
-	};
-
-	led5 {
-		label = "ipq::led5";
-		linux,default-trigger = "none";
-	};
-};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,26 +57,6 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
-define Device/emplus_wap380c
-  DEVICE_TITLE := Emplus WAP380C
-  DEVICE_DTS := qcom-ipq807x-wap380c
-  DEVICE_DTS_CONFIG=config@hk07
-  SUPPORTED_DEVICES := emplus,wap380c
-  DEVICE_PACKAGES := ath11k-wifi-emplus-wap380c uboot-envtools
-endef
-TARGET_DEVICES += emplus_wap380c
-
-define Device/sonicfi_rap650c
-  DEVICE_TITLE := SonicFi RAP650C
-  DEVICE_DTS := qcom-ipq807x-rap650c
-  DEVICE_DTS_CONFIG=config@hk09
-  SUPPORTED_DEVICES := sonicfi,rap650c
-  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
-  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
-  IMAGE/nand-factory.ubi := append-ubi
-endef
-TARGET_DEVICES += sonicfi_rap650c
-
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/ipq807x_v5.4/mac80211/patches/pending/999-remove-kernel-warn-msg-abnormal-he-nss-value.patch

@@ -6,7 +6,7 @@
  		return 0;
 -	if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8))
 +	if (rate->nss < 1 || rate->nss > 8) {
-+		printk_once(KERN_WARNING "cfg80211_calculate_bitrate_he: invalid rate->nss: %d\n", rate->nss);
++		printk_once(1, "invalid rate->nss: %d\n", rate->nss);
  		return 0;
 -
 +	}

feeds/ipq807x_v5.4/mac80211/patches/pending/a-003-fix-roaming-firmware-crash.patch

@@ -1,119 +0,0 @@
---- a/drivers/net/wireless/ath/ath11k/peer.c
-+++ b/drivers/net/wireless/ath/ath11k/peer.c
-@@ -819,10 +819,7 @@ int ath11k_peer_delete(struct ath11k *ar
- #ifdef CPTCFG_ATH11K_NSS_SUPPORT
- 		mutex_unlock(&ar->ab->base_ast_lock);
- #endif
--		ath11k_warn(ar->ab,
--			    "failed to find peer vdev_id %d addr %pM in delete\n",
--			    vdev_id, addr);
--		return -EINVAL;
-+		return 0;
-         }
- 
- #ifdef CPTCFG_ATH11K_NSS_SUPPORT
-@@ -883,6 +880,7 @@ int ath11k_peer_create(struct ath11k *ar
- 	struct ieee80211_vif *vif = arvif->vif;
- 	struct ath11k_sta *arsta;
- 	int ret, fbret;
-+	u8 vdev_id = 0;
- 
- 	lockdep_assert_held(&ar->conf_mutex);
- 
-@@ -891,20 +889,21 @@ int ath11k_peer_create(struct ath11k *ar
- 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
- 		return -ENOBUFS;
- 	}
-+
- 	mutex_lock(&ar->ab->tbl_mtx_lock);
- 	spin_lock_bh(&ar->ab->base_lock);
- 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
-+	if (peer)
-+		vdev_id = peer->vdev_id;
-+	spin_unlock_bh(&ar->ab->base_lock);
-+	mutex_unlock(&ar->ab->tbl_mtx_lock);
-+
- 	if (peer) {
--		if (peer->vdev_id == param->vdev_id) {
--			spin_unlock_bh(&ar->ab->base_lock);
--			mutex_unlock(&ar->ab->tbl_mtx_lock);
-+		if (vdev_id == param->vdev_id)
- 			return -EINVAL;
--		}
--		ath11k_peer_rhash_delete(ar->ab, peer);
--	}
- 
--	spin_unlock_bh(&ar->ab->base_lock);
--	mutex_unlock(&ar->ab->tbl_mtx_lock);
-+		ath11k_peer_delete(ar, vdev_id, param->peer_addr);
-+	}
- 
- 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
- 	if (ret) {
---- a/drivers/net/wireless/ath/ath11k/dp.c
-+++ b/drivers/net/wireless/ath/ath11k/dp.c
-@@ -28,7 +28,7 @@ void ath11k_dp_peer_cleanup(struct ath11
- 	spin_lock_bh(&ab->base_lock);
- 	peer = ath11k_peer_find(ab, vdev_id, addr);
- 	if (!peer) {
--		ath11k_warn(ab, "failed to lookup peer %pM on vdev %d\n",
-+		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to lookup peer %pM on vdev %d\n",
- 			    addr, vdev_id);
- 		spin_unlock_bh(&ab->base_lock);
- 		return;
---- a/drivers/net/wireless/ath/ath11k/dp_rx.c
-+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
-@@ -1204,9 +1204,9 @@ int ath11k_dp_rx_ampdu_stop(struct ath11
- 
- 	peer = ath11k_peer_find(ab, vdev_id, params->sta->addr);
- 	if (!peer) {
--		ath11k_warn(ab, "failed to find the peer to stop rx aggregation\n");
-+		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to find the peer to stop rx aggregation\n");
- 		spin_unlock_bh(&ab->base_lock);
--		return -ENOENT;
-+		return 0;
- 	}
- 
- 	paddr = peer->rx_tid[params->tid].paddr;
---- a/drivers/net/wireless/ath/ath11k/mac.c
-+++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -4075,7 +4075,7 @@ static int ath11k_clear_peer_keys(struct
- 	peer = ath11k_peer_find(ab, arvif->vdev_id, addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ab->base_lock);
--		return -ENOENT;
-+		return 0;
- 	}
- 	for (i = 0; i < ARRAY_SIZE(keys); i++) {
- 		keys[i]= peer->keys[i];
-@@ -4325,6 +4325,10 @@ static int ath11k_mac_op_set_key(struct
- 
- 	spin_lock_bh(&ab->base_lock);
- 	peer = ath11k_peer_find(ab, arvif->vdev_id, peer_addr);
-+	if (!peer && cmd == DISABLE_KEY) {
-+		ret = 0;
-+		goto unlock;
-+	}
- 
- 	/* TODO: Check if vdev specific security cfg is mandatory */
- 	ret = ath11k_nss_vdev_set_cmd(arvif, ATH11K_NSS_WIFI_VDEV_SECURITY_TYPE_CMD, key->cipher);
-@@ -5961,7 +5965,7 @@ static void ath11k_mac_op_sta_rc_update(
- 	peer = ath11k_peer_find(ar->ab, arvif->vdev_id, sta->addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ar->ab->base_lock);
--		ath11k_warn(ar->ab, "mac sta rc update failed to find peer %pM on vdev %i\n",
-+		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac sta rc update failed to find peer %pM on vdev %i\n",
- 			    sta->addr, arvif->vdev_id);
- 		return;
- 	}
---- a/drivers/net/wireless/ath/ath11k/wmi.c
-+++ b/drivers/net/wireless/ath/ath11k/wmi.c
-@@ -8425,7 +8425,7 @@ static void ath11k_peer_sta_kickout_even
- 	peer = ath11k_peer_find_by_addr(ab, arg.mac_addr);
- 	if (!peer) {
- 		spin_unlock_bh(&ab->base_lock);
--		ath11k_warn(ab, "peer not found %pM\n",
-+		ath11k_dbg(ab, ATH11K_DBG_WMI, "peer not found %pM\n",
- 			    arg.mac_addr);
- 		goto exit;
- 	}

feeds/mediatek-sdk/mac80211/files/lib/wifi/mac80211.sh

@@ -146,40 +146,6 @@ check_board_phy() {
 	fi
 }
 
-is_morse_phy() {
-	local dev="$1"
-	local morse_path="/sys/class/ieee80211/${dev}/device/morse/"
-
-	if [ -d "$morse_path" ]; then
-		return 0  # This is a Morse PHY
-	else
-		return 1  # Not a Morse PHY
-	fi
-}
-
-# Set up Morse-specific wireless configuration
-setup_morse_wireless() {
-	local dev="$1"
-	local name="$2"
-
-	# Create Morse-specific wireless configuration with exact settings
-	uci -q batch <<-EOF
-		set wireless.${name}=wifi-device
-		set wireless.${name}.disabled='0'
-		set wireless.${name}.mode='ap'
-		set wireless.${name}.type='morse'
-		set wireless.${name}.path='platform/11009000.spi/spi_master/spi1/spi1.0'
-		set wireless.${name}.channel='12'
-		set wireless.${name}.hwmode='a'
-		set wireless.${name}.band='s1g'
-		set wireless.${name}.htmode='8'
-		set wireless.${name}.country='US'
-		set wireless.${name}.channels=''
-EOF
-
-	uci -q commit wireless
-}
-
 detect_mac80211() {
 	devidx=0
 	config_load wireless
@@ -192,6 +158,13 @@ detect_mac80211() {
 
 		dev="${_dev##*/}"
 
+		mode_band=""
+		channel=""
+		htmode=""
+		ht_capab=""
+
+		get_band_defaults "$dev"
+
 		path="$(iwinfo nl80211 path "$dev")"
 		macaddr="$(cat /sys/class/ieee80211/${dev}/macaddress)"
 
@@ -210,51 +183,35 @@ detect_mac80211() {
 
 		name="radio${devidx}"
 		devidx=$(($devidx + 1))
+		case "$dev" in
+			phy*)
+				if [ -n "$path" ]; then
+					dev_id="set wireless.${name}.path='$path'"
+				else
+					dev_id="set wireless.${name}.macaddr='$macaddr'"
+				fi
+				;;
+			*)
+				dev_id="set wireless.${name}.phy='$dev'"
+				;;
+		esac
 
-		# Check if this is a Morse PHY
-		if is_morse_phy "$dev"; then
-			# Use dedicated Morse configuration
-			setup_morse_wireless "$dev" "$name"
-		else
-			# Standard wireless configuration for non-Morse devices
-			mode_band=""
-			channel=""
-			htmode=""
-			ht_capab=""
+		uci -q batch <<-EOF
+			set wireless.${name}=wifi-device
+			set wireless.${name}.type=mac80211
+			${dev_id}
+			set wireless.${name}.channel=${channel}
+			set wireless.${name}.band=${mode_band}
+			set wireless.${name}.htmode=$htmode
+			set wireless.${name}.disabled=1
 
-			# Get default settings for standard devices
-			get_band_defaults "$dev"
-
-			case "$dev" in
-				phy*)
-					if [ -n "$path" ]; then
-						dev_id="set wireless.${name}.path='$path'"
-					else
-						dev_id="set wireless.${name}.macaddr='$macaddr'"
-					fi
-					;;
-				*)
-					dev_id="set wireless.${name}.phy='$dev'"
-					;;
-			esac
-
-			uci -q batch <<-EOF
-				set wireless.${name}=wifi-device
-				set wireless.${name}.type=mac80211
-				${dev_id}
-				set wireless.${name}.channel=${channel}
-				set wireless.${name}.band=${mode_band}
-				set wireless.${name}.htmode=$htmode
-				set wireless.${name}.disabled=1
-
-				set wireless.default_${name}=wifi-iface
-				set wireless.default_${name}.device=${name}
-				set wireless.default_${name}.network=lan
-				set wireless.default_${name}.mode=ap
-				set wireless.default_${name}.ssid=OpenWrt
-				set wireless.default_${name}.encryption=none
+			set wireless.default_${name}=wifi-iface
+			set wireless.default_${name}.device=${name}
+			set wireless.default_${name}.network=lan
+			set wireless.default_${name}.mode=ap
+			set wireless.default_${name}.ssid=OpenWrt
+			set wireless.default_${name}.encryption=none
 EOF
-			uci -q commit wireless
-		fi
+		uci -q commit wireless
 	done
 }

feeds/mediatek-sdk/mac80211/patches/subsys/999-9031-morse-mac80211-disable-robust-management-frame-without-sta-check.patch

@@ -1,13 +0,0 @@
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -4193,8 +4196,10 @@
-	case NL80211_IFTYPE_STATION:
-		if (!bssid && !sdata->u.mgd.use_4addr)
-			return false;
-+#if 0
-		if (ieee80211_is_robust_mgmt_frame(skb) && !rx->sta)
-			return false;
-+#endif
-		if (multicast)
-			return true;
-		return ether_addr_equal(sdata->vif.addr, hdr->addr1);

feeds/mediatek-sdk/mac80211/patches/subsys/999-9046-morse-mac80211_ndp_block_ack.patch

@@ -1,443 +0,0 @@
---- a/include/linux/ieee80211.h
-+++ b/include/linux/ieee80211.h
-@@ -3434,6 +3434,9 @@
- 	WLAN_ACTION_ADDBA_REQ = 0,
- 	WLAN_ACTION_ADDBA_RESP = 1,
- 	WLAN_ACTION_DELBA = 2,
-+	WLAN_ACTION_NDP_ADDBA_REQ = 128,
-+	WLAN_ACTION_NDP_ADDBA_RESP = 129,
-+	WLAN_ACTION_NDP_DELBA = 130,    
- };
- 
- /* BACK (block-ack) parties */
-
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -125,6 +125,13 @@
-  * via the usual ieee80211_tx_dequeue).
-  */
- 
-+ /** Morse Micro patches which add functionality that the driver needs to know about, can be
-+  * signalled by adding a define here.
-+  */
-+
-+ /** mac80211 has the capability to negotiate NDP block acknowledgements */
-+ #define MORSE_MAC80211_S1G_FEATURE_NDP_BLOCKACK
-+
- struct device;
- 
- /**
-@@ -2437,7 +2444,10 @@
-  *
-  * @IEEE80211_HW_DETECTS_COLOR_COLLISION: HW/driver has support for BSS color
-  *	collision detection and doesn't need it in software.
-- *
-+ * 
-+ + @IEEE80211_HW_SUPPORTS_NDP_BLOCKACK: Hardware supports 11ah A-MPDU aggregation with NDP block
-+ +  ACKs
-+ +
-  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
-  */
- enum ieee80211_hw_flags {
-@@ -2494,6 +2504,7 @@
- 	IEEE80211_HW_SUPPORTS_RX_DECAP_OFFLOAD,
- 	IEEE80211_HW_SUPPORTS_CONC_MON_RX_DECAP,
- 	IEEE80211_HW_DETECTS_COLOR_COLLISION,
-+	IEEE80211_HW_SUPPORTS_NDP_BLOCKACK,
- 
- 	/* keep last, obviously */
- 	NUM_IEEE80211_HW_FLAGS
-@@ -3315,7 +3326,8 @@
-  *	action is set to %IEEE80211_AMPDU_RX_START or
-  *	%IEEE80211_AMPDU_TX_OPERATIONAL
-  * @amsdu: indicates the peer's ability to receive A-MSDU within A-MPDU.
-- *	valid when the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL
-+ *	valid when the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL 
-+ * @ndp: indicates the driver has requested the session to use NDP block ACKs
-  * @timeout: BA session timeout. Valid only when the action is set to
-  *	%IEEE80211_AMPDU_RX_START
-  */
-@@ -3326,6 +3338,7 @@
- 	u16 ssn;
- 	u16 buf_size;
- 	bool amsdu;
-+       bool ndp;
- 	u16 timeout;
- };
- 
-
---- a/net/mac80211/agg-rx.c
-+++ b/net/mac80211/agg-rx.c
-@@ -80,6 +80,8 @@
- 	RCU_INIT_POINTER(sta->ampdu_mlme.tid_rx[tid], NULL);
- 	__clear_bit(tid, sta->ampdu_mlme.agg_session_valid);
- 
-+       if (tid_rx) params.ndp = tid_rx->ndp;
-+
- 	ht_dbg(sta->sdata,
- 	       "Rx BA session stop requested for %pM tid %u %s reason: %d\n",
- 	       sta->sta.addr, tid,
-@@ -94,7 +96,7 @@
- 	/* check if this is a self generated aggregation halt */
- 	if (initiator == WLAN_BACK_RECIPIENT && tx)
- 		ieee80211_send_delba(sta->sdata, sta->sta.addr,
--				     tid, WLAN_BACK_RECIPIENT, reason);
-+				     tid, params.ndp, WLAN_BACK_RECIPIENT, reason);
- 
- 	/*
- 	 * return here in case tid_rx is not assigned - which will happen if
-@@ -214,7 +216,7 @@
- 
- static void ieee80211_send_addba_resp(struct sta_info *sta, u8 *da, u16 tid,
- 				      u8 dialog_token, u16 status, u16 policy,
--				      u16 buf_size, u16 timeout,
-+				      u16 buf_size, u16 timeout, bool ndp,
- 				      const struct ieee80211_addba_ext_ie *addbaext)
- {
- 	struct ieee80211_sub_if_data *sdata = sta->sdata;
-@@ -248,7 +250,8 @@
- 
- 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp));
- 	mgmt->u.action.category = WLAN_CATEGORY_BACK;
--	mgmt->u.action.u.addba_resp.action_code = WLAN_ACTION_ADDBA_RESP;
-+	mgmt->u.action.u.addba_resp.action_code = ndp ?
-+                       WLAN_ACTION_NDP_ADDBA_RESP : WLAN_ACTION_ADDBA_RESP;
- 	mgmt->u.action.u.addba_resp.dialog_token = dialog_token;
- 
- 	capab = 0;
-@@ -273,7 +276,7 @@
- void ___ieee80211_start_rx_ba_session(struct sta_info *sta,
- 				      u8 dialog_token, u16 timeout,
- 				      u16 start_seq_num, u16 ba_policy, u16 tid,
--				      u16 buf_size, bool tx, bool auto_seq,
-+				      u16 buf_size, bool tx, bool auto_seq, bool ndp,
- 				      const struct ieee80211_addba_ext_ie *addbaext)
- {
- 	struct ieee80211_local *local = sta->sdata->local;
-@@ -284,6 +287,7 @@
- 		.tid = tid,
- 		.amsdu = false,
- 		.timeout = timeout,
-+		.ndp = ndp,
- 		.ssn = start_seq_num,
- 	};
- 	int i, ret = -EOPNOTSUPP;
-@@ -306,6 +310,12 @@
- 		goto end;
- 	}
- 
-+    
-+       if (ndp && !ieee80211_hw_check(&local->hw, SUPPORTS_NDP_BLOCKACK)) {
-+       	ht_dbg(sta->sdata, "Requested NDP BA but HW does not support it\n");
-+       	goto end;
-+       }
-+
- 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
- 		ht_dbg(sta->sdata,
- 		       "Suspend in progress - Denying ADDBA request (%pM tid %d)\n",
-@@ -438,6 +448,7 @@
- 	tid_agg_rx->started = false;
- 	tid_agg_rx->reorder_buf_filtered = 0;
- 	tid_agg_rx->tid = tid;
-+       tid_agg_rx->ndp = params.ndp;
- 	tid_agg_rx->sta = sta;
- 	status = WLAN_STATUS_SUCCESS;
- 
-@@ -459,20 +470,20 @@
- 	if (tx)
- 		ieee80211_send_addba_resp(sta, sta->sta.addr, tid,
- 					  dialog_token, status, 1, buf_size,
--					  timeout, addbaext);
-+					  timeout, params.ndp, addbaext);
- }
- 
- static void __ieee80211_start_rx_ba_session(struct sta_info *sta,
- 					    u8 dialog_token, u16 timeout,
- 					    u16 start_seq_num, u16 ba_policy,
- 					    u16 tid, u16 buf_size, bool tx,
--					    bool auto_seq,
-+					    bool auto_seq, bool ndp,
- 					    const struct ieee80211_addba_ext_ie *addbaext)
- {
- 	mutex_lock(&sta->ampdu_mlme.mtx);
- 	___ieee80211_start_rx_ba_session(sta, dialog_token, timeout,
- 					 start_seq_num, ba_policy, tid,
--					 buf_size, tx, auto_seq, addbaext);
-+					 buf_size, tx, auto_seq, ndp, addbaext);
- 	mutex_unlock(&sta->ampdu_mlme.mtx);
- }
- 
-@@ -485,6 +496,7 @@
- 	struct ieee802_11_elems *elems = NULL;
- 	u8 dialog_token;
- 	int ies_len;
-+       bool ndp_ba;
- 
- 	/* extract session parameters from addba request frame */
- 	dialog_token = mgmt->u.action.u.addba_req.dialog_token;
-@@ -496,6 +508,7 @@
- 	ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
- 	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
- 	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
-+       ndp_ba = (mgmt->u.action.u.addba_req.action_code == WLAN_ACTION_NDP_ADDBA_REQ);
- 
- 	ies_len = len - offsetof(struct ieee80211_mgmt,
- 				 u.action.u.addba_req.variable);
-@@ -508,7 +521,7 @@
- 
- 	__ieee80211_start_rx_ba_session(sta, dialog_token, timeout,
- 					start_seq_num, ba_policy, tid,
--					buf_size, true, false,
-+					buf_size, true, false, ndp_ba,
- 					elems ? elems->addba_ext_ie : NULL);
- free:
- 	kfree(elems);
-	
---- a/net/mac80211/agg-tx.c
-+++ b/net/mac80211/agg-tx.c
-@@ -65,7 +65,7 @@
-  */
- 
- static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
--					 const u8 *da, u16 tid,
-+					 const u8 *da, u16 tid, bool ndp,
- 					 u8 dialog_token, u16 start_seq_num,
- 					 u16 agg_size, u16 timeout)
- {
-@@ -99,7 +99,8 @@
- 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
- 
- 	mgmt->u.action.category = WLAN_CATEGORY_BACK;
--	mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
-+	mgmt->u.action.u.addba_req.action_code = ndp ? WLAN_ACTION_NDP_ADDBA_REQ :
-+                       WLAN_ACTION_ADDBA_REQ;
- 
- 	mgmt->u.action.u.addba_req.dialog_token = dialog_token;
- 	if (amsdu)
-@@ -488,7 +489,7 @@
- 	}
- 
- 	/* send AddBA request */
--	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
-+	ieee80211_send_addba_request(sdata, sta->sta.addr, tid, tid_tx->ndp,
- 				     tid_tx->dialog_token, tid_tx->ssn,
- 				     buf_size, tid_tx->timeout);
- 
-@@ -506,10 +507,18 @@
- 		.tid = tid,
- 		.buf_size = 0,
- 		.amsdu = false,
-+		.ndp = false,
- 		.timeout = 0,
- 	};
- 	int ret;
- 
-+      /* If the HW supports NDP blockacks, try to negotiate. It's the drivers responsibility to
-+       * clear .ndp if the conditions for NDP block acks are not met for this TID.
-+       * TODO: remove driver responsibility when S1G STA caps exist in mac80211
-+       */
-+       if (ieee80211_hw_check(&local->hw, SUPPORTS_NDP_BLOCKACK))
-+       	params.ndp = true;
-+
- 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- 
- 	/*
-@@ -532,6 +541,11 @@
- 	params.ssn = sta->tid_seq[tid] >> 4;
- 	ret = drv_ampdu_action(local, sdata, &params);
- 	tid_tx->ssn = params.ssn;
-+
-+    
-+       /* driver may clear this flag if it does not want NDP for this session */
-+       tid_tx->ndp = params.ndp;
-+      
- 	if (ret == IEEE80211_AMPDU_TX_START_DELAY_ADDBA) {
- 		return;
- 	} else if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
-@@ -769,6 +783,7 @@
- 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- 	params.buf_size = tid_tx->buf_size;
- 	params.amsdu = tid_tx->amsdu;
-+	params.ndp = tid_tx->ndp;
- 
- 	ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
- 	       sta->sta.addr, tid);
-@@ -950,7 +965,7 @@
- 		ieee80211_agg_start_txq(sta, tid, false);
- 
- 	if (send_delba)
--		ieee80211_send_delba(sdata, sta->sta.addr, tid,
-+		ieee80211_send_delba(sdata, sta->sta.addr, tid, tid_tx->ndp,
- 			WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
- }
- 
-@@ -1009,6 +1024,13 @@
- 		goto out;
- 	}
- 
-+       if ((tid_tx->ndp && mgmt->u.action.u.addba_resp.action_code != WLAN_ACTION_NDP_ADDBA_RESP) ||
-+           (!tid_tx->ndp && mgmt->u.action.u.addba_resp.action_code != WLAN_ACTION_ADDBA_RESP)) {
-+            ht_dbg(sta->sdata, "wrong addBA response action code, %d ndp %d\n",
-+                               mgmt->u.action.u.addba_resp.action_code, tid_tx->ndp);
-+           goto out;
-+       }
-+
- 	del_timer_sync(&tid_tx->addba_resp_timer);
- 
- 	ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
---- a/net/mac80211/debugfs.c
-+++ b/net/mac80211/debugfs.c
-@@ -543,6 +543,7 @@
- 	FLAG(SUPPORTS_RX_DECAP_OFFLOAD),
- 	FLAG(SUPPORTS_CONC_MON_RX_DECAP),
- 	FLAG(DETECTS_COLOR_COLLISION),
-+	FLAG(SUPPORTS_NDP_BLOCKACK),
- #undef FLAG
- };
- 
---- a/net/mac80211/ht.c
-+++ b/net/mac80211/ht.c
-@@ -365,7 +365,7 @@
- 				       sta->ampdu_mlme.tid_rx_manage_offl))
- 			___ieee80211_start_rx_ba_session(sta, 0, 0, 0, 1, tid,
- 							 IEEE80211_MAX_AMPDU_BUF_HT,
--							 false, true, NULL);
-+							 false, true, false, NULL);
- 
- 		if (test_and_clear_bit(tid + IEEE80211_NUM_TIDS,
- 				       sta->ampdu_mlme.tid_rx_manage_offl))
-@@ -412,7 +412,7 @@
- }
- 
- void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
--			  const u8 *da, u16 tid,
-+			  const u8 *da, u16 tid, bool ndp,
- 			  u16 initiator, u16 reason_code)
- {
- 	struct ieee80211_local *local = sdata->local;
-@@ -443,7 +443,7 @@
- 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
- 
- 	mgmt->u.action.category = WLAN_CATEGORY_BACK;
--	mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
-+	mgmt->u.action.u.delba.action_code = ndp ? WLAN_ACTION_NDP_DELBA : WLAN_ACTION_DELBA;
- 	params = (u16)(initiator << 11); 	/* bit 11 initiator */
- 	params |= (u16)(tid << 12); 		/* bit 15:12 TID number */
- 
---- a/net/mac80211/ieee80211_i.h
-+++ b/net/mac80211/ieee80211_i.h
-@@ -1902,7 +1902,7 @@
- 				       const struct ieee80211_ht_cap *ht_cap_ie,
- 				       struct sta_info *sta);
- void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
--			  const u8 *da, u16 tid,
-+			  const u8 *da, u16 tid, bool ndp,
- 			  u16 initiator, u16 reason_code);
- int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
- 			       enum ieee80211_smps_mode smps, const u8 *da,
-@@ -1919,7 +1919,7 @@
- void ___ieee80211_start_rx_ba_session(struct sta_info *sta,
- 				      u8 dialog_token, u16 timeout,
- 				      u16 start_seq_num, u16 ba_policy, u16 tid,
--				      u16 buf_size, bool tx, bool auto_seq,
-+				      u16 buf_size, bool tx, bool auto_seq, bool ndp,
- 				      const struct ieee80211_addba_ext_ie *addbaext);
- void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta,
- 					 enum ieee80211_agg_stop_reason reason);
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1551,14 +1551,17 @@
- 		if (sta) {
- 			switch (mgmt->u.action.u.addba_req.action_code) {
- 			case WLAN_ACTION_ADDBA_REQ:
-+			case WLAN_ACTION_NDP_ADDBA_REQ:
- 				ieee80211_process_addba_request(local, sta,
- 								mgmt, len);
- 				break;
- 			case WLAN_ACTION_ADDBA_RESP:
-+			case WLAN_ACTION_NDP_ADDBA_RESP:
- 				ieee80211_process_addba_resp(local, sta,
- 							     mgmt, len);
- 				break;
- 			case WLAN_ACTION_DELBA:
-+			case WLAN_ACTION_NDP_DELBA:
- 				ieee80211_process_delba(sdata, sta,
- 							mgmt, len);
- 				break;
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1389,7 +1389,7 @@
- 		if (ack_policy == IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK &&
- 		    !test_bit(tid, rx->sta->ampdu_mlme.agg_session_valid) &&
- 		    !test_and_set_bit(tid, rx->sta->ampdu_mlme.unexpected_agg))
--			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid,
-+			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid, false,
- 					     WLAN_BACK_RECIPIENT,
- 					     WLAN_REASON_QSTA_REQUIRE_SETUP);
- 		goto dont_reorder;
-@@ -3101,7 +3101,7 @@
- 
- 		if (!test_bit(tid, rx->sta->ampdu_mlme.agg_session_valid) &&
- 		    !test_and_set_bit(tid, rx->sta->ampdu_mlme.unexpected_agg))
--			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid,
-+			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid, false,
- 					     WLAN_BACK_RECIPIENT,
- 					     WLAN_REASON_QSTA_REQUIRE_SETUP);
- 
-@@ -3526,16 +3526,19 @@
- 
- 		switch (mgmt->u.action.u.addba_req.action_code) {
- 		case WLAN_ACTION_ADDBA_REQ:
-+		case WLAN_ACTION_NDP_ADDBA_REQ:
- 			if (len < (IEEE80211_MIN_ACTION_SIZE +
- 				   sizeof(mgmt->u.action.u.addba_req)))
- 				goto invalid;
- 			break;
- 		case WLAN_ACTION_ADDBA_RESP:
-+		case WLAN_ACTION_NDP_ADDBA_RESP:
- 			if (len < (IEEE80211_MIN_ACTION_SIZE +
- 				   sizeof(mgmt->u.action.u.addba_resp)))
- 				goto invalid;
- 			break;
- 		case WLAN_ACTION_DELBA:
-+		case WLAN_ACTION_NDP_DELBA:
- 			if (len < (IEEE80211_MIN_ACTION_SIZE +
- 				   sizeof(mgmt->u.action.u.delba)))
- 				goto invalid;
---- a/net/mac80211/sta_info.h
-+++ b/net/mac80211/sta_info.h
-@@ -170,6 +170,7 @@
-  * @failed_bar_ssn: ssn of the last failed BAR tx attempt
-  * @bar_pending: BAR needs to be re-sent
-  * @amsdu: support A-MSDU withing A-MDPU
-+ * @ndp: this session is using NDP block ACKs
-  *
-  * This structure's lifetime is managed by RCU, assignments to
-  * the array holding it must hold the aggregation mutex.
-@@ -198,6 +199,7 @@
- 	u16 failed_bar_ssn;
- 	bool bar_pending;
- 	bool amsdu;
-+	bool ndp;
- 	u8 tid;
- };
- 
-@@ -225,6 +227,7 @@
-  *	and ssn.
-  * @removed: this session is removed (but might have been found due to RCU)
-  * @started: this session has started (head ssn or higher was received)
-+ * @ndp: this session is using NDP block ACKs
-  *
-  * This structure's lifetime is managed by RCU, assignments to
-  * the array holding it must hold the aggregation mutex.
-@@ -252,7 +255,8 @@
- 	u8 tid;
- 	u8 auto_seq:1,
- 	   removed:1,
--	   started:1;
-+	   started:1,
-+	   ndp:1;
- };
- 
- /**

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap111.dts

@@ -169,8 +169,7 @@
 		compatible = "mediatek,eth-mac";
 		reg = <0>;
 		phy-mode = "sgmii";
-		phy-handle = <&phy30>;
-		phy-handle2 = <&phy1>;
+		phy-handle = <&phy1>;      // add phy handler
 		mtd-mac-address = <&factory 0x24>;
 	};
 
@@ -182,9 +181,9 @@
 		mtd-mac-address = <&factory 0x2a>;
 	};
 
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
+        mdio: mdio-bus {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
 		phy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-id03a2.9461";
@@ -194,16 +193,6 @@
 			nvmem-cell-names = "phy-cal-data";
 		};
 
-		phy30: ethernet-phy@30 { // AN8801SB
-			compatible = "ethernet-phy-idc0ff.0421";
-			reg = <30>; //0x1e
-			phy-mode = "sgmii";
-			full-duplex;
-			pause;
-			airoha,surge = <1>;
-			airoha,polarity = <2>;
-		};
-
 		phy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-id03a2.9471";
 			reg = <24>;            // set phy address to 0x18
@@ -211,8 +200,9 @@
 			reset-assert-us = <600>;
 			reset-deassert-us = <20000>;
 			phy-mode = "sgmii";
-		};
-	};
+    };
+
+        };
 };
 
 &hnat {

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap112.dts

@@ -255,21 +255,18 @@
 &spi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi2_pins>;
-        address-cells = <1>;
-        size-cells = <0>;
 	status = "okay";
 
-
-        mm6108: mm6108@0 {
-                compatible = "morse,mm610x-spi";
-                reg = <0>;
-                reset-gpios = <&pio 31 0>;
-                power-gpios = <&pio 5 0>,<&pio 0 0>;
-                spi-irq-gpios = <&pio 30 0>;
-                status = "okay";
-                spi-max-frequency = <52000000>;
-                spi-tx-bus-width = <1>;
-                spi-rx-bus-width = <1>;
+	slb9670: slb9670@0 {
+		compatible = "infineon,slb9670";
+		reg = <0>; /* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-cal-enable;
+		spi-cal-mode = "read-data";
+		spi-cal-datalen = <2>;
+		spi-cal-data = /bits/ 8 <0x00 0x1b>;
+		spi-max-frequency = <40000000>;
 	};
 };
 
@@ -341,18 +338,6 @@
 			function = "spi";
 			groups = "spi2";
 		};
-
-                conf-pu {
-                        pins = "SPI2_CS";
-                        drive-strength = <8>;
-                        mediatek,pull-up-adv = <3>;
-                };
-
-                conf-pd {
-                        pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
-                        drive-strength = <8>;
-                        mediatek,pull-down-adv = <3>;
-                };
 	};
 
 	uart1_pins: uart1-pins-g1 {

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-emplus-wap588m.dts

@@ -1,349 +0,0 @@
-/dts-v1/;
-#include "mt7981.dtsi"
-/ {
-	model = "Emplus WAP588M";
-	compatible = "emplus,wap588m";
-	chosen {
-		bootargs = "console=ttyS0,115200n1 loglevel=8  \
-				earlycon=uart8250,mmio32,0x11002000";
-	};
-
-	memory {
-		reg = <0 0x40000000 0 0x10000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-				};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		power {
-			label = "power";
-			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-			default-state = "on";
-
-		};
-		wifi2g {
-			label = "wifi2g";
-			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ra0";
-		};
-		wifi5g {
-			label = "wifi5g";
-			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "rax0";
-		};
-		lan {
-			label = "lan";
-			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "eth0";
-		};
-		wan {
-			label = "wan";
-			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "eth1";
-		};
-	};
-
-	nmbm_spim_nand {
-		compatible = "generic,nmbm";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		lower-mtd-device = <&spi_nand>;
-		forced-create;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "BL2";
-				reg = <0x00000 0x0100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot-env";
-				reg = <0x0100000 0x0080000>;
-			};
-
-			factory: partition@180000 {
-				label = "Factory";
-				reg = <0x180000 0x0200000>;
-			};
-
-			partition@380000 {
-				label = "FIP";
-				reg = <0x380000 0x0200000>;
-			};
-
-			partition@580000 {
-				label = "ubi"; //110MB
-				reg = <0x580000 0x3700000>;
-			};
-
-			partition@3C80000 {
-				label = "ubi_1"; //110MB
-				reg = <0x3C80000 0x3700000>;
-			};
-
-			partition@7380000 {
-				label = "cert"; //384KB
-				reg = <0x7380000 0x0060000>;
-			};
-
-			partition@73E0000 {
-				label = "userconfig"; //640KB
-				reg = <0x73E0000 0x00a0000>;
-			};
-
-			partition@7480000 {
-				label = "crashdump"; //384KB
-				reg = <0x7480000 0x0060000>;
-			};
-		};
-	};
-
-	sound_wm8960 {
-		compatible = "mediatek,mt79xx-wm8960-machine";
-		mediatek,platform = <&afe>;
-		audio-routing = "Headphone", "HP_L",
-				"Headphone", "HP_R",
-				"LINPUT1", "AMIC",
-				"RINPUT1", "AMIC";
-		mediatek,audio-codec = <&wm8960>;
-		status = "disabled";
-	};
-
-	sound_si3218x {
-		compatible = "mediatek,mt79xx-si3218x-machine";
-		mediatek,platform = <&afe>;
-		mediatek,ext-codec = <&proslic_spi>;
-		status = "disabled";
-	};
-};
-
-&afe {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcm_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c_pins>;
-	status = "disabled";
-
-	wm8960: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&eth {
-        status = "okay";
-
-        gmac0: mac@0 {
-                compatible = "mediatek,eth-mac";
-                reg = <0>;
-                phy-mode = "sgmii";
-                phy-handle = <&phy1>;
-        };
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "gmii";
-		phy-handle = <&phy0>;
-	};
-
-        mdio: mdio-bus {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-		// MT7981 internal PHY
-		phy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-id03a2.9461";
-			reg = <0>;
-			phy-mode = "gmii";
-			nvmem-cells = <&phy_calibration>;
-			nvmem-cell-names = "phy-cal-data";
-		};
-
-
-		// RTL8211FS PHY
-		phy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-id001c.c916";
-			reg = <1>;
-			reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <120000>;
-			reset-deassert-us = <120000>;
-			phy-mode = "sgmii";
-		};
-    };
-};
-
-&hnat {
-	mtketh-wan = "eth1";
-	mtketh-lan = "eth0";
-	mtketh-max-gmac = <2>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_flash_pins>;
-	status = "okay";
-	spi_nand: spi_nand@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		reg = <0>;
-		spi-max-frequency = <52000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spic_pins>;
-	status = "okay";
-
-	proslic_spi: proslic_spi@0 {
-		compatible = "silabs,proslic_spi";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
-		channel_count = <1>;
-		debug_level = <4>;       /* 1 = TRC, 2 = DBG, 4 = ERR */
-		reset_gpio = <&pio 15 0>;
-		ig,enable-spi = <1>;     /* 1: Enable, 0: Disable */
-	};
-};
-
-&wbsys {
-	mediatek,mtd-eeprom = <&factory 0x0000>;
-	status = "okay";
-	pinctrl-names = "dbdc";
-	pinctrl-0 = <&wf_dbdc_pins>;
-};
-
-&pio {
-
-	i2c_pins: i2c-pins-g0 {
-                mux {
-                        function = "i2c";
-                        groups = "i2c0_0";
-                };
-        };
-
-        pcm_pins: pcm-pins-g0 {
-                mux {
-                        function = "pcm";
-                        groups = "pcm";
-                };
-        };
-
-        pwm0_pin: pwm0-pin-g0 {
-                mux {
-                        function = "pwm";
-                        groups = "pwm0_0";
-                };
-        };
-
-        pwm1_pin: pwm1-pin-g0 {
-                mux {
-                        function = "pwm";
-                        groups = "pwm1_0";
-                };
-        };
-
-        pwm2_pin: pwm2-pin {
-                mux {
-                        function = "pwm";
-                        groups = "pwm2";
-                };
-        };
-
-	spi0_flash_pins: spi0-pins {
-		mux {
-			function = "spi";
-			groups = "spi0", "spi0_wp_hold";
-		};
-
-		conf-pu {
-			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-		};
-
-		conf-pd {
-			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
-			drive-strength = <MTK_DRIVE_8mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-		};
-	};
-
-	spic_pins: spi1-pins {
-		mux {
-			function = "spi";
-			groups = "spi1_1";
-		};
-	};
-
-	uart1_pins: uart1-pins-g1 {
-                mux {
-                        function = "uart";
-                        groups = "uart1_1";
-                };
-        };
-
-	uart2_pins: uart2-pins-g1 {
-		mux {
-                        function = "uart";
-                        groups = "uart2_1";
-                };
-        };
-	wf_dbdc_pins: wf_dbdc-pins {
-		mux {
-			function = "eth";
-			groups = "wf0_mode1";
-		};
-		conf {
-			pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
-			       "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
-			       "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
-			       "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
-			       "WF_CBA_RESETB", "WF_DIG_RESETB";
-			drive-strength = <MTK_DRIVE_4mA>;
-		};
-	};
-};
-
-&xhci {
-	mediatek,u3p-dis-msk = <0x0>;
-	phys = <&u2port0 PHY_TYPE_USB2>,
-	       <&u3port0 PHY_TYPE_USB3>;
-	status = "disabled";
-};

feeds/mediatek-sdk/mediatek/files-5.4/drivers/net/phy/an8801.c

@@ -113,6 +113,7 @@ static const struct AIR_LED_CFG_T led_cfg_dlt[MAX_LED_SIZE] = {
 	/* LED2 */
 	{LED_ENABLE, AIR_LED_GPIO9, AIR_ACTIVE_LOW,  AIR_LED2_ON, AIR_LED2_BLK},
 };
+
 static const u16 led_blink_cfg_dlt = AIR_LED_BLK_DUR_64M;
 /* RGMII delay */
 static const u8 rxdelay_force = FALSE;
@@ -139,6 +140,7 @@ static int __air_buckpbus_reg_write(struct phy_device *phydev, u32 addr,
 	err |= mbus->write(mbus, phy_addr, 0x13, (u16)(data >> 16));
 	err |= mbus->write(mbus, phy_addr, 0x14, (u16)(data & 0xffff));
 	err |= mbus->write(mbus, phy_addr, 0x1F, 0);
+
 	return err;
 }
 
@@ -165,41 +167,6 @@ static u32 __air_buckpbus_reg_read(struct phy_device *phydev, u32 addr)
 	return data;
 }
 
-static u32 __air_buckpbus_reg_modify(struct phy_device *phydev, u32 addr,
-					u32 mask, u32 set)
-{
-	int err = 0;
-	u32 data_h, data_l, data_old, data_new;
-	int phy_addr = phydev_phy_addr(phydev);
-	struct mii_bus *mbus = phydev_mdiobus(phydev);
-
-	err = mbus->write(mbus, phy_addr, 0x1F, 4);
-	err |= mbus->write(mbus, phy_addr, 0x10, 0);
-	err |= mbus->write(mbus, phy_addr, 0x15, (u16)(addr >> 16));
-	err |= mbus->write(mbus, phy_addr, 0x16, (u16)(addr & 0xffff));
-	data_h = mbus->read(mbus, phy_addr, 0x17);
-	data_l = mbus->read(mbus, phy_addr, 0x18);
-	if (err < 0) {
-		mbus->write(mbus, phy_addr, 0x1F, 0);
-		return INVALID_DATA;
-	}
-
-	data_old = ((data_h & 0xffff) << 16) | (data_l & 0xffff);
-	data_new = (data_old & ~mask) | set;
-	if (data_new == data_old) {
-		mbus->write(mbus, phy_addr, 0x1F, 0);
-		return 0;
-	}
-
-	err |= mbus->write(mbus, phy_addr, 0x11, (u16)(addr >> 16));
-	err |= mbus->write(mbus, phy_addr, 0x12, (u16)(addr & 0xffff));
-	err |= mbus->write(mbus, phy_addr, 0x13, (u16)(data_new >> 16));
-	err |= mbus->write(mbus, phy_addr, 0x14, (u16)(data_new & 0xffff));
-	err |= mbus->write(mbus, phy_addr, 0x1F, 0);
-
-	return err;
-}
-
 static int air_buckpbus_reg_write(struct phy_device *phydev, u32 addr, u32 data)
 {
 	int err = 0;
@@ -222,18 +189,82 @@ static u32 air_buckpbus_reg_read(struct phy_device *phydev, u32 addr)
 	return data;
 }
 
-static int air_buckpbus_reg_modify(struct phy_device *phydev, u32 addr,
-					u32 mask, u32 set)
+static int __an8801_cl45_write(struct phy_device *phydev, int devad, u16 reg,
+				u16 val)
+{
+	u32 addr = (AN8801_EPHY_ADDR | AN8801_CL22 | (devad << 18) |
+				(reg << 2));
+
+	return __air_buckpbus_reg_write(phydev, addr, val);
+}
+
+static int __an8801_cl45_read(struct phy_device *phydev, int devad, u16 reg)
+{
+	u32 addr = (AN8801_EPHY_ADDR | AN8801_CL22 | (devad << 18) |
+				(reg << 2));
+
+	return __air_buckpbus_reg_read(phydev, addr);
+}
+
+int __an8801_modify_cl45_changed(struct phy_device *phydev, int devad, u32 regnum,
+				u16 mask, u16 set)
+{
+	int new, ret;
+
+	ret = __an8801_cl45_read(phydev, devad, regnum);
+	if (ret < 0)
+		return ret;
+
+	new = (ret & ~mask) | set;
+	if (new == ret)
+		return 0;
+
+	ret = __an8801_cl45_write(phydev, devad, regnum, new);
+
+	return ret < 0 ? ret : 1;
+}
+
+static int an8801_modify_cl45_changed(struct phy_device *phydev, int devad,
+				u32 regnum, u16 mask, u16 set)
 {
 	int err = 0;
 
 	mdiobus_lock(phydev);
-	err = __air_buckpbus_reg_modify(phydev, addr, mask, set);
+	err = __an8801_modify_cl45_changed(phydev, devad, regnum, mask, set);
 	mdiobus_unlock(phydev);
 
 	return err;
 }
 
+static int an8801_cl45_write(struct phy_device *phydev, int devad, u16 reg,
+			      u16 val)
+{
+	int err = 0;
+
+	mdiobus_lock(phydev);
+	err = __an8801_cl45_write(phydev, devad, reg, val);
+	mdiobus_unlock(phydev);
+
+	return err;
+}
+
+static int an8801_cl45_read(struct phy_device *phydev, int devad, u16 reg,
+			     u16 *read_data)
+{
+	int data = 0;
+
+	mdiobus_lock(phydev);
+	data = __an8801_cl45_read(phydev, devad, reg);
+	mdiobus_unlock(phydev);
+
+	if (data == INVALID_DATA)
+		return -EINVAL;
+
+	*read_data = data;
+
+	return 0;
+}
+
 static int air_sw_reset(struct phy_device *phydev)
 {
 	u32 reg_value;
@@ -267,36 +298,50 @@ static int an8801_led_set_usr_def(struct phy_device *phydev, u8 entity,
 
 	on_evt |= LED_ON_EN;
 
-	err = phy_write_mmd(phydev, 0x1f, LED_ON_CTRL(entity), on_evt);
+	err = an8801_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), on_evt);
 	if (err)
 		return -1;
 
-	return phy_write_mmd(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt);
+	return an8801_cl45_write(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt);
 }
 
 static int an8801_led_set_mode(struct phy_device *phydev, u8 mode)
 {
+	int err;
+	u16 data;
+
+	err = an8801_cl45_read(phydev, 0x1f, LED_BCR, &data);
+	if (err)
+		return -1;
+
 	switch (mode) {
 	case AIR_LED_MODE_DISABLE:
-		return phy_modify_mmd(phydev, 0x1f, LED_BCR,
-						(LED_BCR_EXT_CTRL | LED_BCR_CLK_EN),
-						0x0);
+		data &= ~LED_BCR_EXT_CTRL;
+		data &= ~LED_BCR_MODE_MASK;
+		data |= LED_BCR_MODE_DISABLE;
+		break;
 	case AIR_LED_MODE_USER_DEFINE:
-		return phy_modify_mmd(phydev, 0x1f, LED_BCR,
-						(LED_BCR_EXT_CTRL | LED_BCR_CLK_EN),
-						(LED_BCR_EXT_CTRL | LED_BCR_CLK_EN));
-	default:
+		data |= (LED_BCR_EXT_CTRL | LED_BCR_CLK_EN);
 		break;
 	}
-	dev_err(phydev_dev(phydev),
-				"LED mode %d is not supported\n", mode);
-	return -EINVAL;
+	return an8801_cl45_write(phydev, 0x1f, LED_BCR, data);
 }
 
 static int an8801_led_set_state(struct phy_device *phydev, u8 entity, u8 state)
 {
-	return phy_modify_mmd(phydev, 0x1f, LED_ON_CTRL(entity), LED_ON_EN,
-					(state) ? LED_ON_EN : 0x0);
+	u16 data;
+	int err;
+
+	err = an8801_cl45_read(phydev, 0x1f, LED_ON_CTRL(entity), &data);
+	if (err)
+		return err;
+
+	if (state)
+		data |= LED_ON_EN;
+	else
+		data &= ~LED_ON_EN;
+
+	return an8801_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), data);
 }
 
 static int an8801_led_init(struct phy_device *phydev)
@@ -307,12 +352,12 @@ static int an8801_led_init(struct phy_device *phydev)
 	u32 data;
 	u16 led_blink_cfg = priv->led_blink_cfg;
 
-	ret = phy_write_mmd(phydev, 0x1f, LED_BLK_DUR,
+	ret = an8801_cl45_write(phydev, 0x1f, LED_BLK_DUR,
 				 LED_BLINK_DURATION(led_blink_cfg));
 	if (ret < 0)
 		return ret;
 
-	ret = phy_write_mmd(phydev, 0x1f, LED_ON_DUR,
+	ret = an8801_cl45_write(phydev, 0x1f, LED_ON_DUR,
 				 (LED_BLINK_DURATION(led_blink_cfg) >> 1));
 	if (ret < 0)
 		return ret;
@@ -361,56 +406,6 @@ static int an8801_led_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int an8801_ack_interrupt(struct phy_device *phydev)
-{
-	u32 reg_val = 0;
-
-	air_buckpbus_reg_write(phydev, 0x10285404, 0x102);
-	reg_val = air_buckpbus_reg_read(phydev, 0x10285400);
-	air_buckpbus_reg_write(phydev, 0x10285400, 0x0);
-	air_buckpbus_reg_write(phydev, 0x10285400, reg_val | 0x10);
-	air_buckpbus_reg_write(phydev, 0x10285404, 0x12);
-	air_buckpbus_reg_write(phydev, 0x10285704, 0x1f);
-	return 0;
-}
-
-static int an8801_config_intr(struct phy_device *phydev)
-{
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-		air_buckpbus_reg_write(phydev, 0x1000007c, BIT(AIR_INTERRUPT_GPIO) << 16);
-		air_buckpbus_reg_modify(phydev, 0x10285700, 0x1, 0x1);
-	} else {
-		air_buckpbus_reg_write(phydev, 0x1000007c, 0x0);
-		air_buckpbus_reg_modify(phydev, 0x10285700, 0x1, 0x0);
-	}
-	an8801_ack_interrupt(phydev);
-	return 0;
-}
-
-static int an8801_did_interrupt(struct phy_device *phydev)
-{
-	u32 reg_val = 0;
-
-	reg_val = air_buckpbus_reg_read(phydev, 0x10285704);
-
-	if (reg_val & 0x11)
-		return 1;
-
-	return 0;
-}
-
-#if (KERNEL_VERSION(5, 11, 0) < LINUX_VERSION_CODE)
-static irqreturn_t an8801_handle_interrupt(struct phy_device *phydev)
-{
-	if (!an8801_did_interrupt(phydev))
-		return IRQ_NONE;
-
-	an8801_ack_interrupt(phydev);
-	phy_trigger_machine(phydev);
-	return IRQ_HANDLED;
-}
-#endif
-
 static int findClosestNumber(const u16 *arr, u16 size, u16 target)
 {
 	int left = 0, right = size - 1;
@@ -436,77 +431,77 @@ static int findClosestNumber(const u16 *arr, u16 size, u16 target)
 static int an8801sb_i2mpb_config(struct phy_device *phydev)
 {
 	int ret = 0;
-	u16 cl45_value = 0, temp_cl45 = 0;
+	u16 cl45_value = 0, temp_cl45 = 0, set = 0;
 	u16 mask = 0;
 
-	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x12);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x12, &cl45_value);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(15, 10)) + (6 << 10);
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x12, GENMASK(15, 10), cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x12, GENMASK(15, 10), cl45_value);
 	if (ret < 0)
 		return ret;
-	temp_cl45 = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x16);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x16, &temp_cl45);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, temp_cl45);
 	mask = GENMASK(15, 10) | GENMASK(5, 0);
 	cl45_value = (temp_cl45 & GENMASK(15, 10)) + (9 << 10);
 	cl45_value = ((temp_cl45 & GENMASK(5, 0)) + 6) | cl45_value;
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x16, mask, cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x16, mask, cl45_value);
 	if (ret < 0)
 		return ret;
-	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x17);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x17, &cl45_value);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(13, 8)) + (6 << 8);
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x17, GENMASK(13, 8), cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x17, GENMASK(13, 8), cl45_value);
 	if (ret < 0)
 		return ret;
-	temp_cl45 = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x18);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x18, &temp_cl45);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, temp_cl45);
 	mask = GENMASK(13, 8) | GENMASK(5, 0);
 	cl45_value = (temp_cl45 & GENMASK(13, 8)) + (9 << 8);
 	cl45_value = ((temp_cl45 & GENMASK(5, 0)) + 6) | cl45_value;
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x18, mask, cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x18, mask, cl45_value);
 	if (ret < 0)
 		return ret;
-	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x19);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x19, &cl45_value);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(13, 8)) + (6 << 8);
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x19, GENMASK(13, 8), cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x19, GENMASK(13, 8), cl45_value);
 	if (ret < 0)
 		return ret;
-	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x20);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x20, &cl45_value);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(5, 0)) + 6;
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x20, GENMASK(5, 0), cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x20, GENMASK(5, 0), cl45_value);
 	if (ret < 0)
 		return ret;
-	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x21);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x21, &cl45_value);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(13, 8)) + (6 << 8);
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x21, GENMASK(13, 8), cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x21, GENMASK(13, 8), cl45_value);
 	if (ret < 0)
 		return ret;
-	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x22);
+	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x22, &cl45_value);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(5, 0)) + 6;
-	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x22, GENMASK(5, 0), cl45_value);
+	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x22, GENMASK(5, 0), cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x23, 0x883);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x24, 0x883);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x25, 0x883);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x26, 0x883);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x0, 0x100);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x1, 0x1bc);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x2, 0x1d0);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x3, 0x186);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x4, 0x202);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x5, 0x20e);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x6, 0x300);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x7, 0x3c0);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x8, 0x3d0);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x9, 0x317);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0xa, 0x206);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0xb, 0xe);
+	ret = an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x23, 0x883);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x24, 0x883);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x25, 0x883);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x26, 0x883);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x0, 0x100);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x1, 0x1bc);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x2, 0x1d0);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x3, 0x186);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x4, 0x202);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x5, 0x20e);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x6, 0x300);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x7, 0x3c0);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x8, 0x3d0);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x9, 0x317);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0xa, 0x206);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0xb, 0xe);
 	if (ret < 0)
 		return ret;
 
@@ -515,14 +510,14 @@ static int an8801sb_i2mpb_config(struct phy_device *phydev)
 }
 
 void update_r50_value(struct phy_device *phydev,
-	u16 *cl45_value, int pos1, int pos2)
+			u16 *cl45_value, int pos1, int pos2)
 {
 	*cl45_value &= ~(0x007f << 8);
 	*cl45_value |= ((r50ohm_table[pos1]) & 0x007f) << 8;
 	*cl45_value &= ~(0x007f);
 	*cl45_value |= (r50ohm_table[pos2]) & 0x007f;
 	dev_dbg(phydev_dev(phydev), "Read: r50ohm_tx_1=%d r50ohm_tx_2=%d\n",
-		r50ohm_table[pos1], r50ohm_table[pos2]);
+			r50ohm_table[pos1], r50ohm_table[pos2]);
 }
 
 int calculate_position(int pos, int shift, int table_size)
@@ -534,7 +529,7 @@ int calculate_position(int pos, int shift, int table_size)
 }
 
 int process_r50(struct phy_device *phydev, int reg,
-	u16 *cl45_value, u16 *r50ohm_tx_a, u16 *r50ohm_tx_b)
+			u16 *cl45_value, u16 *r50ohm_tx_a, u16 *r50ohm_tx_b)
 {
 	int pos1 = findClosestNumber(r50ohm_table, r50ohm_table_size, *r50ohm_tx_a);
 	int pos2 = findClosestNumber(r50ohm_table, r50ohm_table_size, *r50ohm_tx_b);
@@ -544,7 +539,7 @@ int process_r50(struct phy_device *phydev, int reg,
 		pos2 = calculate_position(pos2, R50_SHIFT, r50ohm_table_size);
 
 		update_r50_value(phydev, cl45_value, pos1, pos2);
-		return phy_write_mmd(phydev, 0x1e, reg, *cl45_value);
+		return an8801_cl45_write(phydev, 0x1e, reg, *cl45_value);
 	}
 	return 0;
 }
@@ -563,10 +558,10 @@ static int an8801r_of_init(struct phy_device *phydev)
 			return -1;
 		}
 		if (val < AIR_RGMII_DELAY_NOSTEP ||
-			val > AIR_RGMII_DELAY_STEP_7) {
+		    val > AIR_RGMII_DELAY_STEP_7) {
 			dev_err(phydev_dev(phydev),
-					"airoha,rxclk-delay value %u out of range.",
-					val);
+				   "airoha,rxclk-delay value %u out of range.",
+				   val);
 			return -1;
 		}
 		priv->rxdelay_force = TRUE;
@@ -579,14 +574,14 @@ static int an8801r_of_init(struct phy_device *phydev)
 		if (of_property_read_u32(of_node, "airoha,txclk-delay",
 					 &val) != 0) {
 			dev_err(phydev_dev(phydev),
-					"airoha,txclk-delay value is invalid.");
+				   "airoha,txclk-delay value is invalid.");
 			return -1;
 		}
 		if (val < AIR_RGMII_DELAY_NOSTEP ||
-			val > AIR_RGMII_DELAY_STEP_7) {
+		    val > AIR_RGMII_DELAY_STEP_7) {
 			dev_err(phydev_dev(phydev),
-					"airoha,txclk-delay value %u out of range.",
-					val);
+				   "airoha,txclk-delay value %u out of range.",
+				   val);
 			return -1;
 		}
 		priv->txdelay_force = TRUE;
@@ -608,10 +603,10 @@ static int an8801sb_of_init(struct phy_device *phydev)
 			return -1;
 		}
 		if (val < AIR_POL_TX_NOR_RX_REV ||
-			val > AIR_POL_TX_REV_RX_NOR) {
+		    val > AIR_POL_TX_REV_RX_NOR) {
 			dev_err(phydev_dev(phydev),
-					"airoha,polarity value %u out of range.",
-					val);
+				   "airoha,polarity value %u out of range.",
+				   val);
 			return -1;
 		}
 		priv->pol = val;
@@ -620,15 +615,15 @@ static int an8801sb_of_init(struct phy_device *phydev)
 
 	if (of_find_property(of_node, "airoha,surge", NULL)) {
 		if (of_property_read_u32(of_node, "airoha,surge",
-					 &val) != 0) {
+					&val) != 0) {
 			dev_err(phydev_dev(phydev), "airoha,surge value is invalid.");
 			return -1;
 		}
 		if (val < AIR_SURGE_0R ||
 			val > AIR_SURGE_5R) {
 			dev_err(phydev_dev(phydev),
-					"airoha,surge value %u out of range.",
-					val);
+				"airoha,surge value %u out of range.",
+				val);
 			return -1;
 		}
 		priv->surge = val;
@@ -698,19 +693,23 @@ int an8801sb_surge_protect_cfg(struct phy_device *phydev)
 	u16 cl45_value = 0;
 
 	if (priv->surge) {
-		cl45_value = phy_read_mmd(phydev, 0x1e, 0x174);
+		ret = an8801_cl45_read(phydev, 0x1e, 0x174, &cl45_value);
+		if (ret < 0)
+			return ret;
 		r50ohm_tx_a = (cl45_value >> 8) & 0x007f;
 		r50ohm_tx_b = cl45_value & 0x007f;
 		dev_dbg(phydev_dev(phydev), "Read: (0x174) value=0x%04x r50ohm_tx_a=%d r50ohm_tx_b=%d\n",
-			cl45_value, r50ohm_tx_a, r50ohm_tx_b);
+		cl45_value, r50ohm_tx_a, r50ohm_tx_b);
 		ret = process_r50(phydev, 0x174, &cl45_value, &r50ohm_tx_a, &r50ohm_tx_b);
 		if (ret < 0)
 			return ret;
-		cl45_value = phy_read_mmd(phydev, 0x1e, 0x175);
+		ret = an8801_cl45_read(phydev, 0x1e, 0x175, &cl45_value);
+		if (ret < 0)
+			return ret;
 		r50ohm_tx_c = (cl45_value >> 8) & 0x007f;
 		r50ohm_tx_d = cl45_value & 0x007f;
 		dev_dbg(phydev_dev(phydev), "Read: (0x175) value=0x%04x r50ohm_tx_c=%d r50ohm_tx_d=%d\n",
-			cl45_value, r50ohm_tx_c, r50ohm_tx_d);
+		cl45_value, r50ohm_tx_c, r50ohm_tx_d);
 		ret = process_r50(phydev, 0x175, &cl45_value, &r50ohm_tx_c, &r50ohm_tx_d);
 		if (ret < 0)
 			return ret;
@@ -765,10 +764,10 @@ static int an8801sb_config_init(struct phy_device *phydev)
 	dev_info(phydev_dev(phydev),
 		"Tx, Rx Polarity : %08x\n", pbus_value);
 
-	ret = phy_write_mmd(phydev, MMD_DEV_VSPEC2, 0x600, 0x1e);
-	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC2, 0x601, 0x02);
+	ret = an8801_cl45_write(phydev, MMD_DEV_VSPEC2, 0x600, 0x1e);
+	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC2, 0x601, 0x02);
 
-	ret |= phy_write_mmd(phydev, 7, 60, 0x0);
+	ret |= an8801_cl45_write(phydev, 7, 60, 0x0);
 	if (ret != 0) {
 		dev_err(phydev_dev(phydev),
 			"AN8801SB initialize fail, ret %d !\n", ret);
@@ -941,7 +940,7 @@ static ssize_t an8801_polarity_write(struct file *file, const char __user *ptr,
 }
 
 static ssize_t an8801_mdio_write(struct file *file, const char __user *ptr,
-					size_t len, loff_t *off)
+				size_t len, loff_t *off)
 {
 	struct phy_device *phydev = file->private_data;
 	char buf[64], param1[32], param2[32];
@@ -956,7 +955,7 @@ static ssize_t an8801_mdio_write(struct file *file, const char __user *ptr,
 	if (count > sizeof(buf) - 1)
 		return -EINVAL;
 	if (copy_from_user(buf, ptr, len))
-		return -EFAULT;
+	return -EFAULT;
 
 	ret = sscanf(buf, "%s %s", param1, param2);
 	if (ret < 0)
@@ -992,16 +991,16 @@ static ssize_t an8801_mdio_write(struct file *file, const char __user *ptr,
 			pr_notice("\nphy=0x%x, devad=0x%x, reg=0x%x, val=0x%x\n",
 				phydev_phy_addr(phydev), devad, reg, val);
 
-			ret = phy_write_mmd(phydev, devad, reg, val);
+			ret = an8801_cl45_write(phydev, devad, reg, val);
 			if (ret < 0)
 				return ret;
-			reg_val = phy_read_mmd(phydev, devad, reg);
+			an8801_cl45_read(phydev, devad, reg, &reg_val);
 			pr_notice("\nphy=0x%x, devad=0x%x, reg=0x%x, val=0x%x confirm..\n",
 				phydev_phy_addr(phydev), devad, reg, reg_val);
 		} else if (!strncmp("r", param2, strlen("r"))) {
 			if (sscanf(buf, "cl45 r %x %x", &devad, &reg) == -1)
 				return -EFAULT;
-			reg_val = phy_read_mmd(phydev, devad, reg);
+			an8801_cl45_read(phydev, devad, reg, &reg_val);
 			pr_notice("\nphy=0x%x, devad=0x%x, reg=0x%x, val=0x%x\n",
 				phydev_phy_addr(phydev), devad, reg, reg_val);
 		} else {
@@ -1021,6 +1020,7 @@ static int an8801_counter_show(struct seq_file *seq, void *v)
 	struct phy_device *phydev = seq->private;
 	int ret = 0;
 	u32 pkt_cnt = 0;
+	struct mii_bus *mbus = phydev_mdiobus(phydev);
 
 	seq_puts(seq, "==========AIR PHY COUNTER==========\n");
 	seq_puts(seq, "|\t<<SERDES COUNTER>>\n");
@@ -1143,9 +1143,8 @@ static ssize_t an8801_debugfs_pbus(struct file *file,
 	if (buf[0] == 'w') {
 		if (sscanf(buf, "w %x %x", &reg, &val) == -1)
 			return -EFAULT;
-
 		pr_notice("\nphy=0x%x, reg=0x%x, val=0x%x\n",
-				phydev_phy_addr(phydev), reg, val);
+			phydev_phy_addr(phydev), reg, val);
 
 		ret = air_buckpbus_reg_write(phydev, reg, val);
 		if (ret < 0)
@@ -1189,9 +1188,10 @@ int an8801_info_show(struct seq_file *seq, void *v)
 	for (reg = MII_BMCR; reg <= MII_STAT1000; reg++) {
 		if ((reg <= MII_LPA) || (reg >= MII_CTRL1000))
 			seq_printf(seq, "| RG_MII 0x%02x     : 0x%08x\n",
-				reg, phy_read(phydev, reg));
+			reg, phy_read(phydev, reg));
 	}
 	seq_puts(seq, "\n");
+
 	return 0;
 }
 
@@ -1231,10 +1231,10 @@ static const struct file_operations an8801_polarity_fops = {
 };
 
 static const struct file_operations an8801_mdio_fops = {
-	.owner = THIS_MODULE,
-	.open = simple_open,
-	.write = an8801_mdio_write,
-	.llseek = noop_llseek,
+   .owner = THIS_MODULE,
+   .open = simple_open,
+   .write = an8801_mdio_write,
+   .llseek = noop_llseek,
 };
 
 int an8801_debugfs_init(struct phy_device *phydev)
@@ -1354,22 +1354,13 @@ static int an8801sb_read_status(struct phy_device *phydev)
 	if (phydev->link == LINK_DOWN) {
 		prespeed = 0;
 		phydev->speed = 0;
-		ret |= phy_write_mmd(
+		ret |= an8801_cl45_write(
 			phydev, MMD_DEV_VSPEC2, PHY_PRE_SPEED_REG, prespeed);
-
-		mdelay(10);        /* delay 10 ms */
-		reg_value = air_buckpbus_reg_read(phydev, 0x10220010);
-		reg_value &= 0x7fff;
-		air_buckpbus_reg_write(phydev, 0x10220010, reg_value);
-
-		reg_value = air_buckpbus_reg_read(phydev, 0x10220000);
-		reg_value |= AN8801SB_SGMII_AN0_ANRESTART;
-		air_buckpbus_reg_write(phydev, 0x10220000, reg_value);
 	}
 
 	if (prespeed != phydev->speed && phydev->link == LINK_UP) {
 		prespeed = phydev->speed;
-		ret |= phy_write_mmd(
+		ret |= an8801_cl45_write(
 			phydev, MMD_DEV_VSPEC2, PHY_PRE_SPEED_REG, prespeed);
 		dev_info(phydev_dev(phydev), "AN8801SB SPEED %d\n", prespeed);
 		while (an_retry > 0) {
@@ -1383,19 +1374,28 @@ static int an8801sb_read_status(struct phy_device *phydev)
 		mdelay(10);        /* delay 10 ms */
 
 
-		if (prespeed == SPEED_1000) {
-			air_buckpbus_reg_write(
-				phydev, 0x10220010, 0xd801);
-		} else if (prespeed == SPEED_100) {
-			air_buckpbus_reg_write(
-				phydev, 0x10220010, 0xd401);
-		} else {
-			air_buckpbus_reg_write(
-				phydev, 0x10220010, 0xd001);
-		}
+		if (phydev->autoneg == AUTONEG_DISABLE) {
+			dev_info(phydev_dev(phydev),
+				"AN8801SB force speed = %d\n", prespeed);
+			if (prespeed == SPEED_1000) {
+				air_buckpbus_reg_write(
+					phydev, 0x10220010, 0xd801);
+			} else if (prespeed == SPEED_100) {
+				air_buckpbus_reg_write(
+					phydev, 0x10220010, 0xd401);
+			} else {
+				air_buckpbus_reg_write(
+					phydev, 0x10220010, 0xd001);
+			}
 
+			reg_value = air_buckpbus_reg_read(
+				phydev, 0x10220000);
+			reg_value |= AN8801SB_SGMII_AN0_ANRESTART;
+			air_buckpbus_reg_write(
+				phydev, 0x10220000, reg_value);
+		}
 		reg_value = air_buckpbus_reg_read(phydev, 0x10220000);
-		reg_value |= (AN8801SB_SGMII_AN0_RESET | AN8801SB_SGMII_AN0_ANRESTART);
+		reg_value |= AN8801SB_SGMII_AN0_RESET;
 		air_buckpbus_reg_write(phydev, 0x10220000, reg_value);
 	}
 	return ret;
@@ -1451,12 +1451,9 @@ static struct phy_driver airoha_driver[] = {
 		.probe          = an8801_phy_probe,
 		.remove         = an8801_phy_remove,
 		.read_status    = an8801_read_status,
-		.config_intr	= an8801_config_intr,
-#if (KERNEL_VERSION(5, 11, 0) < LINUX_VERSION_CODE)
-		.handle_interrupt = an8801_handle_interrupt,
-#else
-		.did_interrupt	= an8801_did_interrupt,
-		.ack_interrupt	= an8801_ack_interrupt,
+#if (KERNEL_VERSION(4, 5, 0) < LINUX_VERSION_CODE)
+		.read_mmd       = __an8801_cl45_read,
+		.write_mmd      = __an8801_cl45_write,
 #endif
 	}
 };

feeds/mediatek-sdk/mediatek/files-5.4/drivers/net/phy/an8801.h

@@ -12,10 +12,10 @@
 
 /* NAMING DECLARATIONS
  */
-#define AN8801_DRIVER_VERSION  "1.1.6"
+#define AN8801_DRIVER_VERSION  "1.1.4"
 
 #define DEBUGFS_COUNTER         "counter"
-#define DEBUGFS_INFO            "driver_info"
+#define DEBUGFS_INFO     "driver_info"
 #define DEBUGFS_PBUS_OP         "pbus_op"
 #define DEBUGFS_POLARITY        "polarity"
 #define DEBUGFS_MDIO            "mdio"
@@ -88,7 +88,7 @@
 #define LED_BLK_EVT_1000M_RX        BIT(1)
 #define LED_BLK_EVT_1000M_TX        BIT(0)
 
-#define UNIT_LED_BLINK_DURATION     780
+#define UNIT_LED_BLINK_DURATION     1024
 
 /* Serdes auto negotation restart */
 #define AN8801SB_SGMII_AN0_ANRESTART    (0x0200)
@@ -135,9 +135,6 @@ For reference only
 #define LED_BLINK_DURATION(f)       (UNIT_LED_BLINK_DURATION << (f))
 #define LED_GPIO_SEL(led, gpio)     ((led) << ((gpio) * 3))
 
-/* Interrupt GPIO number, should not conflict with LED */
-#define AIR_INTERRUPT_GPIO	3
-
 /* DATA TYPE DECLARATIONS
  */
 enum AIR_LED_GPIO_PIN_T {

feeds/mediatek-sdk/mediatek/files-5.4/drivers/net/phy/en8801sc.c

@@ -587,7 +587,7 @@ static int en8801s_phase1_init(struct phy_device *phydev)
 
 	phydev->dev_flags = PHY_STATE_INIT;
 
-	dev_info(dev, "Phase1 initialize OK ! (%s) 10Te TP_IDL fixed.\n", EN8801S_DRIVER_VERSION);
+	dev_info(dev, "Phase1 initialize OK ! (%s)\n", EN8801S_DRIVER_VERSION);
 	if (priv->pro_version == 4) {
 		ret = en8801s_phase2_init(phydev);
 		if (ret != 0) {
@@ -811,7 +811,14 @@ static int en8801s_phase2_init(struct phy_device *phydev)
 		retry--;
 	}
 	pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C38); /* RAW#2 */
-	ret = airoha_cl45_write(mbus, phy_addr, 0x1E, 0x12, 0xA018);
+	ret = airoha_cl45_read(mbus, phy_addr, 0x1E, 0x12, &cl45_value);
+	if (ret < 0)
+		return ret;
+	GPHY_RG_1E_012.DATA = cl45_value;
+	GPHY_RG_1E_012.DataBitField.da_tx_i2mpb_a_tbt =
+				(u16)(pbus_data & 0x03f);
+	ret = airoha_cl45_write(mbus, phy_addr, 0x1E, 0x12,
+				GPHY_RG_1E_012.DATA);
 	if (ret < 0)
 		return ret;
 	ret = airoha_cl45_read(mbus, phy_addr, 0x1E, 0x17, &cl45_value);
@@ -886,17 +893,6 @@ static int en8801s_phase2_init(struct phy_device *phydev)
 		}
 	}
 
-	//Fix 10Te TP_IDL
-	ret = airoha_cl45_read(mbus, phy_addr, 0x1E,
-				0x1A3, &cl45_value);
-	if (ret < 0)
-		return ret;
-	cl45_value &= ~0xf0;
-	ret = airoha_cl45_write(mbus, phy_addr, 0x1E,
-				0x1A3, cl45_value);
-	if (ret < 0)
-		return ret;
-
 	priv->first_init = false;
 	dev_info(phydev_dev(phydev), "Phase2 initialize OK !\n");
 	return 0;

feeds/mediatek-sdk/mediatek/image/mt7981.mk

@@ -307,28 +307,3 @@ define Device/senao_jeap6500
 endef
 TARGET_DEVICES += senao_jeap6500
 DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME
-
-define Device/emplus_wap588m
-   DEVICE_VENDOR := EMPLUS
-   DEVICE_MODEL := WAP588M
-   DEVICE_DTS := mt7981-emplus-wap588m
-   DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
-   SUPPORTED_DEVICES := emplus,wap588m
-   DEVICE_PACKAGES := kmod-mt7981-firmware kmod-mt7915e uboot-envtools -procd-ujail
-   UBINIZE_OPTS := -E 5
-   BLOCKSIZE := 128k
-   PAGESIZE := 2048
-   IMAGE_SIZE := 65536k
-   KERNEL_IN_UBI := 1
-   FIT_KEY_DIR := $(DTS_DIR)/mediatek/keys/emplus_wap588m
-   FIT_KEY_NAME := fit_key
-   IMAGES += factory.bin
-   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
-   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-   KERNEL = kernel-bin | lzma | \
-     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
-   KERNEL_INITRAMFS = kernel-bin | lzma | \
-     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
- endef
- TARGET_DEVICES += emplus_wap588m
- DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/board.d/02_network

@@ -31,10 +31,7 @@ mediatek_setup_interfaces()
 		;;
 	sonicfi,rap630w-211g)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
-		;;
-    emplus,wap588m)
-        ucidef_set_interfaces_lan_wan "eth0" "eth1"
-        ;;
+		;;		
 	*)	
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/init.d/boocount

@@ -8,9 +8,6 @@ boot() {
 	edgecore,eap112)
 		bootcount=$(fw_printenv -n bootcount)
 		[ "$bootcount" != 0 ] && fw_setenv bootcount 0
-		# enable dualboot
-		avail=$(fw_printenv -n upgrade_available)
-		[ ${avail} -eq 0 ] && fw_setenv upgrade_available 1
 		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/uci-defaults/30_uboot-envtools

@@ -18,7 +18,6 @@ case "$board" in
 edgecore,eap111|\
 edgecore,eap112|\
 senao,iap2300m|\
-emplus,wap588m|\
 senao,jeap6500)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x20000" "0x20000"
 	;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/upgrade/platform.sh

@@ -1,17 +1,5 @@
 REQUIRE_IMAGE_METADATA=1
 
-swap_wap588m_active_fw() {
-	echo "Doing swap active_fw" > /dev/console
-        tmp_active_fw=$(fw_printenv | grep active_fw | awk -F= {'print $2'})
-	if [ $tmp_active_fw == "0" ]; then
-		fw_setenv active_fw 1
-                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi_1\),56320k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
-	else
-		fw_setenv active_fw 0
-                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi\),56320k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
-	fi
-}
-
 senao_swap_active_fw() {
 	echo "Doing swap active_fw" > /dev/console
 	tmp_active_fw=$(fw_printenv -n active_fw)
@@ -59,7 +47,6 @@ platform_do_upgrade() {
 		nand_do_upgrade "$1"
 		;;
 	senao,iap2300m|\
-	emplus,wap588m|\
 	senao,jeap6500)
 		CI_UBIPART="ubi_1"
 		nand_do_upgrade "$1"
@@ -81,7 +68,6 @@ platform_check_image() {
 	edgecore,eap111|\
 	edgecore,eap112|\
 	senao,iap2300m|\
-	emplus,wap588m|\
 	senao,jeap6500)
 		nand_do_platform_check "$board" "$1"
 		return $?
@@ -106,8 +92,5 @@ platform_post_upgrade_success() {
 		senao,jeap6500)
 			senao_swap_active_fw
 		;;
-		emplus,wap588m)
-			swap_wap588m_active_fw
-		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/config-5.4

@@ -2,6 +2,7 @@ CONFIG_64BIT=y
 CONFIG_AHCI_MTK=y
 CONFIG_AIROHA_EN8801SC_PHY=y
 # CONFIG_AIROHA_EN8811H_PHY is not set
+# CONFIG_AIROHA_AN8801_PHY is not set
 CONFIG_AN8855_GSW=y
 CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y

feeds/mediatek-sdk/mediatek/patches-5.4/999-2738-an8801sb-gphy-support.patch

@@ -1,3 +1,15 @@
+From 535fdc6dfce7def996a5188819ffc96231c36f98 Mon Sep 17 00:00:00 2001
+From: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
+Date: Tue, 2 Jan 2024 18:13:43 +0800
+Subject: [PATCH] [networking][999-2738-an8801sb-gphy-support.patch]
+
+---
+ drivers/net/phy/Kconfig  |   5 +
+ drivers/net/phy/Makefile |   1 +
+ 2 files changed, 6 insertions(+)
+
+diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
+index ccd3f3f..5dbfb17 100644
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
 @@ -345,6 +345,11 @@ config SFP
@@ -12,6 +24,8 @@
  config AIROHA_EN8801SC_PHY
  	tristate "Drivers for Airoha EN8801S Gigabit PHYs for MediaTek SoC."
  	---help---
+diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
+index 1e8d67b..d39e54b 100644
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
 @@ -74,6 +74,7 @@ endif
@@ -22,64 +36,6 @@
  obj-$(CONFIG_AIROHA_EN8801SC_PHY)	+= en8801sc.o
  air_en8811h-y := air_en8811h_main.o air_en8811h_api.o
  obj-$(CONFIG_AIROHA_EN8811H_PHY)	+= air_en8811h.o
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -870,12 +870,17 @@
- 	of_node_put(phy_node);
- 
- 	if (!phy_dev)
--		return -ENODEV;
--
-+	{
-+		phylink_info(pl, "[phylink] reload phy-handle2. %s %d\n",__func__, __LINE__);
-+		phy_node = of_parse_phandle(dn, "phy-handle2", 0);
-+		phy_dev = of_phy_attach(pl->netdev, phy_node, flags, pl->link_interface);
-+		if (!phy_dev)
-+			return -ENODEV;
-+	}
-+	
- 	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
- 	if (ret)
- 		phy_detach(phy_dev);
--
- 	return ret;
- }
- EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
---- a/drivers/of/of_mdio.c
-+++ b/drivers/of/of_mdio.c
-@@ -226,7 +226,9 @@
- 		return rc;
- 
- 	/* Loop over the child nodes and register a phy_device for each phy */
-+	int an8801=0;
- 	for_each_available_child_of_node(np, child) {
-+		if(an8801==1)break;
- 		addr = of_mdio_parse_addr(&mdio->dev, child);
- 		if (addr < 0) {
- 			scanphys = true;
-@@ -234,7 +236,25 @@
- 		}
- 
- 		if (of_mdiobus_child_is_phy(child))
-+		{
-+			if(addr==30)
-+			{
-+				int phy_id ;
-+
-+				phy_id = mdiobus_read(mdio, addr, MII_PHYSID1) << 16 ;
-+				phy_id = phy_id + mdiobus_read(mdio, addr, MII_PHYSID2);
-+				dev_info(&mdio->dev, "[of_mdio] %s %d  addr:%d phy_id:0x%x  \n",__func__, __LINE__, addr, phy_id);
-+
-+				if (phy_id==0 || phy_id==0x1a750000)
-+				{
-+					dev_info(&mdio->dev, "[of_mdio] %s %d  continue  \n",__func__, __LINE__);
-+					continue;
-+				}
-+				else
-+					an8801=1;
-+			}
- 			rc = of_mdiobus_register_phy(mdio, child, addr);
-+		}
- 		else
- 			rc = of_mdiobus_register_device(mdio, child, addr);
- 
+-- 
+2.18.0
+

feeds/mediatek-sdk/mt76/Makefile

@@ -493,22 +493,10 @@ define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR)/tools
 endef
 
-
 define Build/Install
 	:
 endef
 
-ifdef CONFIG_TARGET_PROFILE
-TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
-PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
-endif
-
-define Build/Patch
-	$(Build/Patch/Default)
-	$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_PROFILE_NAME)/,profile/)
-endef
-
-
 define Package/kmod-mt76/install
 	true
 endef

feeds/mediatek-sdk/mt76/patches-emplus_wap588m/3000-wifi-mt76-mt7915-emplus-wap588m-thermal-protech.patch

@@ -1,26 +0,0 @@
-Index: mt76-2024-04-03-1e336a85/mt7915/mt7915.h
-===================================================================
---- mt76-2024-04-03-1e336a85.orig/mt7915/mt7915.h
-+++ mt76-2024-04-03-1e336a85/mt7915/mt7915.h
-@@ -71,8 +71,8 @@
- #define MT7915_CFEND_RATE_DEFAULT	0x49	/* OFDM 24M */
- #define MT7915_CFEND_RATE_11B		0x03	/* 11B LP, 11M */
- 
--#define MT7915_THERMAL_THROTTLE_MAX	100
--#define MT7915_CDEV_THROTTLE_MAX	99
-+#define MT7915_THERMAL_THROTTLE_MAX	80
-+#define MT7915_CDEV_THROTTLE_MAX	79
- 
- #define MT7915_SKU_RATE_NUM		161
- #define MT7915_SKU_PATH_NUM		185
-@@ -86,8 +86,8 @@
- 
- #define MT7915_CRIT_TEMP_IDX		0
- #define MT7915_MAX_TEMP_IDX		1
--#define MT7915_CRIT_TEMP		110
--#define MT7915_MAX_TEMP			120
-+#define MT7915_CRIT_TEMP		103
-+#define MT7915_MAX_TEMP			118
- 
- struct mt7915_vif;
- struct mt7915_sta;

feeds/morse/kernel/mm-board-config/LICENSE.binaries

@@ -1,125 +0,0 @@
-                                  MORSE MICRO
-                     BINARY DISTRIBUTION LICENSE AGREEMENT
-
-1. Parties.
-This Software License Agreement (SLA) is between Morse Micro Pty. Ltd. and the
-user of the Software set forth (“you”, “user”, “customer”), and is effective as
-of the date of first access or download of the software by you. Morse Micro is
-licensing this software to you free of charge upon the condition that you
-accept all the terms of this SLA and only use this Software in conjunction with
-Morse Micro products. ANY USE, REPRODUCTION, OR DISTRIBUTION OF THE SOFTWARE
-CONSTITUTES YOUR ACCEPTANCE OF THIS AGREEMENT.
-
-2. Definitions.
-"Software" means any binary or source code that you have received from Morse
-Micro or its authorized licensees and/or those portions of such software
-produced by Program’s code within the Software, as well as any other machine
-readable materials (including, but not limited to, libraries, source files,
-header files, and data files), any updates or error corrections provided by
-Morse Micro, and any user manuals, programming guides and other documentation
-provided to you by Morse Micro under this SLA.
-
-3. License and Restrictions.
-Morse Micro grants you a non-exclusive, non-transferable, limited license
-without license fees to:
-
-    a. use the software solely with a hardware product that includes one of the
-    Morse Micro Wi-Fi HaLow chips, including
-    wireless modules or evaluation kits;
-
-    b. to reproduce and distribute the Software complete, unmodified, and as
-    provided by Morse Micro, solely for use with a hardware product that
-    includes one of the Morse Micro Wi-Fi HaLow chips, including wireless
-    modules or evaluation kits.
-
-4. Reservation of Rights.
-You should distribute Software with a copy of this SLA. Software is
-copyrighted. Title to Software and all associated intellectual property rights
-is retained by Morse Micro. Except as expressly provided herein, no license or
-right, express or implied, is hereby conveyed or granted to you by Morse Micro.
-You must retain all copyright notices on all Software, derivative works and
-documentation. The intellectual property and proprietary rights of whatever
-nature in the Software and derivative works are and will remain the exclusive
-property of Morse Micro or its suppliers. Nothing in this Agreement should be
-construed as transferring any aspects of such rights to you or any third party.
-Morse Micro and its suppliers reserve any and all rights not expressly granted
-in this Agreement. You may not sell, assign, sublicense, lease, or otherwise
-transfer any part of this license. You must not:
-
-    a. use, license, sell or otherwise distribute the Software except as
-    provided in this SLA;
-
-    b. attempt to modify in any way, reverse engineer, decompile or disassemble
-    any portion of the Software;
-
-    c. use the Software or other material in violation of any applicable law or
-    regulation, including but not limited to any regulatory agency.
-
-5. Ownership.
-The Software is licensed and not sold.  Title to and ownership of the Software,
-including all intellectual property rights thereto, and any portion thereof
-remain with Morse Micro or its licensors. You hereby covenant that you will not
-assert any claim that the Software created by or for Morse Micro infringe any
-intellectual property right owned or controlled by you.
-
-6. Termination.
-This SLA will terminate immediately without notice from Morse Micro if you fail
-to comply with any of its provisions, including the export laws provisions and
-Section 10 that may govern the export of the Software from certain
-jurisdictions, including technical data.
-
-7. Disclaimer and Limitation of Liability.
-THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MORSE MICRO
-FURTHER DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT
-LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE OR NON-INFRINGEMENT. IN NO EVENT SHALL MORSE MICRO BE LIABLE FOR ANY
-INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES
-FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR ANY THIRD
-PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF MORSE MICRO HAS BEEN
-ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOFTWARE IS NOT INTENDED FOR
-USE IN ENVIRONMENTS OR APPLICATIONS WHERE EXTRAORDINARILY HIGH LEVELS OF
-QUALITY, RELIABILITY, AND FAILURE TOLERANCE ARE DEMANDED, AND/OR WHERE A
-MALFUNCTION OR FAILURE COULD LEAD TO SIGNIFICANT HARM TO LIFE, HEALTH,
-PROPERTY, OR RESULT IN SEVERE SOCIETAL REPERCUSSIONS ("CRITICAL APPLICATIONS").
-CRITICAL APPLICATIONS ENCOMPASS, BUT ARE NOT LIMITED TO, EQUIPMENT UTILIZED IN
-NUCLEAR FACILITIES, AVIATION AND SPACE EQUIPMENT, MEDICAL DEVICES, AUTOMOTIVE,
-TRAIN, MARINE, AND OTHER TRANSPORTATION EQUIPMENT, DEVICES INVOLVED IN
-CONTROLLING COMBUSTION OR EXPLOSIONS, SAFETY DEVICES, ELEVATORS AND ESCALATORS,
-DEVICES ASSOCIATED WITH ELECTRIC POWER, AND EQUIPMENT USED IN FINANCE-RELATED
-FIELDS.
-
-8. Survival.
-Sections 4, 5, 6, 7 and 10 will survive termination or expiration of this SLA.
-
-9. Privacy.
-Some features of the Software, if activated, may transmit a limited amount of
-data to Morse Micro (or its service provider) about the status of the system
-before a crash event. Morse Micro does not associate the data with personally
-identifiable information.
-
-10. Export Laws.
-YOU UNDERSTAND AND AGREE THAT THE SOFTWARE IS SUBJECT TO ALL APPLICABLE EXPORT-
-RELATED LAWS AND REGULATIONS AND THAT YOU MAY NOT EXPORT, RE-EXPORT OR TRANSFER
-THE SOFTWARE OR ANY DIRECT PRODUCT OF THE SOFTWARE EXCEPT AS PERMITTED UNDER
-THOSE LAWS. WITHOUT LIMITING THE FOREGOING, EXPORT, RE-EXPORT, OR TRANSFER OF
-THE SOFTWARE TO CUBA, IRAN, NORTH KOREA, SUDAN, AND SYRIA IS PROHIBITED.
-
-11. Governing Law.
-The laws of New South Wales, Australia, govern all matters arising out of or
-relating to this SLA without giving effect to any conflict of law principles.
-If any provision of this SLA is held to be unenforceable, this SLA will remain
-in effect with the provision omitted, unless omission would frustrate the
-intent of the parties, in which case this Agreement will immediately terminate.
-
-12. Entire Agreement.
-This Agreement constitutes the entire agreement between the parties and
-supersedes all prior and contemporaneous agreements, proposals or
-representations, written or oral, concerning its subject matter. No
-modification, amendment, or waiver of any provision of this Agreement will be
-effective unless in writing and either signed or accepted electronically by the
-party against whom the modification, amendment or waiver is to be asserted. A
-waiver of any breach under this Agreement does not constitute a waiver of any
-other breach or future breach.
-
-
-MORSE MICRO

feeds/morse/kernel/mm-board-config/Makefile

@@ -1,86 +0,0 @@
-#
-# Copyright 2022 Morse Micro
-#
-# This is free software, licensed under the MIT License.
-#
-# This package installs Morse Micro board configuration binaries, which are
-# distributed under the Morse Micro Binary Distribution License.
-# This license is available in LICENSE.binaries.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=morse-board-config
-PKG_RELEASE=6
-
-PKG_VERSION:=rel_1_12_4_2024_Jun_11
-
-PKG_SOURCE:=morsemicro-bcf-rel_1_12_4_2024_Jun_11.tar
-PKG_SOURCE_URL:=https://github.com/MorseMicro/bcf_binaries/releases/download/v1.12.4/
-PKG_HASH:=e403764730aa149e78874135da154bab2a24574308d3f2df88c9b4c125766ae3
-
-PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
-PKG_BUILD_PARALLEL:=1
-
-RSTRIP:=:
-
-include $(INCLUDE_DIR)/kernel.mk
-include $(INCLUDE_DIR)/package.mk
-
-define Package/morse-board-config
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  TITLE:=Morse Micro WIFI HaLow Board Config File
-  PROVIDES:=morse-board-config
-endef
-
-define Package/morse-board-config-hotplug-model
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  TITLE:=Hotplug scripts for module type reporting
-  DEPENDS:=+morse-board-config
-endef
-
-define Package/morse-board-config-hotplug-model/description
-  When enabled, a hotplug script will be installed to
-  append a relevant module type suffix based on the value
-  programmed into the Morse chips OTP bits.
-endef
-
-TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
-
-define Build/Compile
-
-endef
-
-define Package/morse-board-config/install
-	$(INSTALL_DIR) $(1)/usr/share/morse-bcf
-	$(INSTALL_DIR) $(1)/lib/firmware/morse
-
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/firmware/morse/* $(1)/lib/firmware/morse/
-
-	# Install all files from override folder, including failsafe.
-	$(INSTALL_DATA) ./files/lib/firmware/morse/* $(1)/lib/firmware/morse/
-
-ifeq ($(CONFIG_TARGET_PROFILE), "DEVICE_edgecore_eap112")
-	ln -s /lib/firmware/morse/bcf_edgecore_eap112_fcc.bin $(1)/lib/firmware/morse/bcf_default.bin
-else
-	# Link the failsafe bcf by default so userspace can query the driver.
-	ln -s /lib/firmware/morse/bcf_failsafe.bin $(1)/lib/firmware/morse/bcf_default.bin
-endif
-	# Create symlinks for the production programmed otp devices
-	while IFS=, read -r board_type suffix serial; do \
-		ln -s /lib/firmware/morse/bcf_$$$${serial}.bin $(1)/lib/firmware/morse/bcf_boardtype_$$$${board_type}.bin; \
-	done < ./files/usr/share/morse-bcf/db.txt
-
-	$(INSTALL_DATA) ./files/usr/share/morse-bcf/db.txt $(1)/usr/share/morse-bcf/db.txt
-endef
-
-define Package/morse-board-config-hotplug-model/install
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/ieee80211
-	$(INSTALL_DATA) ./files/etc/hotplug.d/ieee80211/20-module-type $(1)/etc/hotplug.d/ieee80211/20-module-type
-endef
-
-$(eval $(call BuildPackage,morse-board-config))
-$(eval $(call BuildPackage,morse-board-config-hotplug-model))

feeds/morse/kernel/mm-board-config/files/etc/hotplug.d/ieee80211/20-module-type

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-[ "${ACTION}" = "add" ] && {
-	basename "$(readlink -f "/sys/${DEVPATH}/device/driver")" | grep '^morse_' || return;
-
-	board_type=$(printf "%04x" "$(cat /sys/${DEVPATH}/device/board_type)");
-
-	# Avoid mutating model information when OTP is not burnt, ie 0000.
-	[ "$board_type" = "0000" ] && return;
-
-	module_id=$(awk -F, '$1==b{print toupper($2)}' b="$board_type" /usr/share/morse-bcf/db.txt)
-
-	model=$(cat /tmp/sysinfo/model)
-
-	# Don't append a module id if that module id already exists in the model
-	[ "${model%-"$module_id"}" != "${model}" ] && return;
-
-	echo "$model-$module_id" > /tmp/sysinfo/model
-}

feeds/morse/kernel/mm-board-config/files/usr/share/morse-bcf/db.txt

@@ -1 +0,0 @@
-0801,05us,mf08651_us

feeds/morse/kernel/mm61xx/Makefile

@@ -1,183 +0,0 @@
-#
-# Copyright 2022 Morse Micro
-#
-# This is free software, licensed under the GPL 2 license.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=morse_driver
-PKG_RELEASE=3
-
-PKG_VERSION:=1.11.4
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_SOURCE_VERSION:=$(PKG_VERSION)
-PKG_SOURCE_URL:=https://github.com/MorseMicro/morse_driver.git
-PKG_HASH:=159d018a92e0cf742795ed49bd94fb6ed324163012bb91c2a2e4e0f6037bbf23
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b2ab42a5f22527422adf6afab73f2d019c16f162
-
-PKG_MAINTAINER:=Morse Micro
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/kernel.mk
-include $(INCLUDE_DIR)/package.mk
-
-DTC=$(wildcard $(LINUX_DIR)/scripts/dtc/dtc)
-
-define KernelPackage/morse
-  SUBMENU:=Wireless Drivers
-  TITLE:=Morse Micro WIFI HaLow driver
-  DEPENDS:= +kmod-mmc +kmod-mac80211 +kmod-trelay +kmod-lib-crc7 +morse-fw +morse-board-config
-  FILES:=\
-    $(PKG_BUILD_DIR)/morse.ko \
-    $(PKG_BUILD_DIR)/dot11ah/dot11ah.ko
-  AUTOLOAD:=$(call AutoProbe,morse)
-  MODPARAMS.morse:=country=US
-  PROVIDES:=kmod-morse
-endef
-
-define KernelPackage/morse/config
-
-       config MORSE_SDIO
-            bool "SDIO support "
-            default n
-            depends on PACKAGE_kmod-morse
-
-       config MORSE_SPI
-            bool "SPI support "
-            default y
-            depends on PACKAGE_kmod-morse
-
-       config MORSE_USER_ACCESS
-            bool "User space access support "
-            default y
-            depends on PACKAGE_kmod-morse
-
-       config MORSE_VENDOR_COMMAND
-            bool "Vendor command support "
-            default y
-            depends on PACKAGE_kmod-morse
-
-       config MORSE_MONITOR
-            bool "Monitor mode support "
-            default n
-            depends on PACKAGE_kmod-morse
-
-       config MORSE_DEBUG
-            bool "Enable debug "
-            default n
-            depends on PACKAGE_kmod-morse
-            help
-              Compiles the driver with debug info and some additional debug features.
-
-      config MORSE_DEBUG_LOGGING
-            bool "Enable debug logging"
-            default n
-            depends on PACKAGE_kmod-morse
-            select KERNEL_DYNAMIC_DEBUG_CORE
-            help
-              Enables debug level logging from the driver. Logging must be enabled at run time.
-              There may be a binary size and performance impact when this is y.
-
-       config MORSE_RC
-            bool "Enable MMRC (Morse Micro Rate Control) "
-            default y
-            depends on PACKAGE_kmod-morse
-
-       config MORSE_SDIO_ALIGNMENT
-            int "Required alignment for bulk SDIO reads/writes"
-            default 2
-            range 2 8
-            depends on MORSE_SDIO
-            help
-              Number of bytes to align data buffers for bulk SDIO transactions. Some hosts have
-              specific alignment requirements for DMA, use this setting to
-              adjust the alignment required.
-
-              Must be a power of 2.
-
-endef
-
-ifeq ($(CONFIG_MORSE_SDIO),y)
-  NOSTDINC_FLAGS += -DCONFIG_MORSE_SDIO
-  MORSE_MAKEDEFS += CONFIG_MORSE_SDIO=y
-endif
-
-ifeq ($(CONFIG_MORSE_SPI),y)
-  MORSE_MAKEDEFS += CONFIG_MORSE_SPI=y
-endif
-
-ifeq ($(CONFIG_MORSE_USER_ACCESS),y)
-  NOSTDINC_FLAGS += -DCONFIG_MORSE_USER_ACCESS
-  MORSE_MAKEDEFS += CONFIG_MORSE_USER_ACCESS=y
-endif
-
-ifeq ($(CONFIG_MORSE_VENDOR_COMMAND),y)
-  NOSTDINC_FLAGS += -DCONFIG_MORSE_VENDOR_COMMAND
-  MORSE_MAKEDEFS += CONFIG_MORSE_VENDOR_COMMAND=y
-endif
-
-ifeq ($(CONFIG_MORSE_MONITOR),y)
-  NOSTDINC_FLAGS += -DCONFIG_MORSE_MONITOR
-  MORSE_MAKEDEFS += CONFIG_MORSE_MONITOR=y
-endif
-
-ifeq ($(CONFIG_MORSE_DEBUG),y)
-  # This DEBUG (used by the driver Makefile) should not be confused with
-  # -DDEBUG (used by the kernel build system).
-  MORSE_MAKEDEFS += DEBUG=y
-  MORSE_MAKEDEFS += CONFIG_MORSE_DEBUGFS=y
-  MORSE_MAKEDEFS += CONFIG_MORSE_ENABLE_TEST_MODES=y
-else
-  MORSE_MAKEDEFS += DEBUG=n
-endif
-
-ifeq ($(CONFIG_MORSE_RC),y)
-  NOSTDINC_FLAGS += -DCONFIG_MORSE_RC
-  MORSE_MAKEDEFS += CONFIG_MORSE_RC=y
-endif
-
-MORSE_MAKEDEFS += \
-  MORSE_VERSION=0-$(PKG_VERSION) \
-  KERNEL_SRC=$(LINUX_DIR) \
-  CONFIG_MORSE_SDIO_ALIGNMENT=$(CONFIG_MORSE_SDIO_ALIGNMENT) \
-  CONFIG_BACKPORT_VERSION=v5.18.1
-# This refers to the version of mac80211 backported to OpenWrt
-# Occasionally patches are required to remove some parts of the driver
-# as OpenWrt may sometimes pull in further patches from later kernel versions
-# than that of the mac80211 backport.
-
-NOSTDINC_FLAGS = \
-	-I$(PKG_BUILD_DIR) \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport \
-	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
-	-I$(STAGING_DIR)/usr/include/mac80211 \
-	-include backport/autoconf.h \
-	-include backport/backport.h
-
-ifeq ($(CONFIG_MORSE_DEBUG_LOGGING),y)
-  NOSTDINC_FLAGS += -DDYNAMIC_DEBUG_MODULE
-  NOSTDINC_FLAGS += -DDEBUG
-endif
-
-MORSE_MAKEDEFS += CONFIG_WLAN_VENDOR_MORSE=m
-MORSE_MAKEDEFS += V=1
-
-NOSTDINC_FLAGS += -DMORSE_TRACE_PATH=.
-
-include $(INCLUDE_DIR)/kernel-defaults.mk
-
-define Build/Compile
-	$(MAKE) $(MORSE_MAKEDEFS) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) \
-		M="$(PKG_BUILD_DIR)" \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		modules
-endef
-
-$(eval $(call KernelPackage,morse))

feeds/morse/kernel/mm61xx/patches/002-fix-watchdog-interval.patch

@@ -1,15 +0,0 @@
---- a/watchdog.c
-+++ b/watchdog.c
-@@ -54,12 +54,7 @@ static enum hrtimer_restart morse_watchd
- static void watchdog_timer_start(struct morse *mors)
- {
- 	ktime_t interval = ktime_set(mors->watchdog.interval_secs, 0);
--
--#if defined(MAC80211_BACKPORT_VERSION_CODE) && (KERNEL_VERSION(4, 10, 0) <= MAC80211_VERSION_CODE)
--	hrtimer_start(&mors->watchdog.timer, interval.tv64, HRTIMER_MODE_REL);
--#else
- 	hrtimer_start(&mors->watchdog.timer, interval, HRTIMER_MODE_REL);
--#endif
- }
-
- int morse_watchdog_start(struct morse *mors)

feeds/morse/kernel/mm61xx/patches/003-ekh01-spi-fix.patch

@@ -1,60 +0,0 @@
---- a/spi.c
-+++ b/spi.c
-@@ -175,10 +175,12 @@ static int morse_spi_setup(struct spi_de
- 	spi->bits_per_word = 8;
- 	spi->max_speed_hz = max_speed_hz;
- 
-+#if 0
- 	if (spi->max_speed_hz > MAX_SPI_CLK_SPEED) {
- 		dev_err(&spi->dev, "SPI clocks above 50MHz are not supported by Morse chip\n");
- 		return -EPERM;
- 	}
-+#endif
- 
- 	ret = spi_setup(spi);
- 	if (ret < 0) {
-@@ -432,7 +434,7 @@ static u8 *morse_spi_find_data_ack(struc
- {
- 	u8 *cp = data;
- 
--	while (cp < end && *cp == 0xff)
-+	while (cp < end && (SPI_MMC_RESPONSE_CODE(*cp) != SPI_RESPONSE_ACCEPTED))
- 		cp++;
- 
- 	if (cp == end)
-@@ -529,13 +531,10 @@ static int morse_spi_cmd53_read(struct m
- 	cp += 4;
- 
- 	if (!block) {
--		/* Scale bytes delay to block */
--		u32 extra_bytes = (count * mspi->inter_block_delay_bytes) / MMC_SPI_BLOCKSIZE;
--
- 		/* Allow 4 bytes for CRC and another 10 bytes for start block token & chip delays
- 		 * (usually comes in 2).
- 		 */
--		data_size = count + 4 + 4 + extra_bytes;
-+		data_size = count + 4 + 4 + mspi->inter_block_delay_bytes;
- 		if (is_rk3288)
- 			/* Short transactions are sometimes delayed. These extra bytes give enough
- 			 * cycles to receive all the data. This could be optimised to a lower
-@@ -601,6 +600,7 @@ static int morse_spi_cmd53_write(struct
- 	u8 *resp;
- 	u8 *end;
- 	u8 *ack = cp;
-+	u8 *test_ack;
- 	u32 data_size;
- 	int i;
- 
-@@ -656,10 +656,11 @@ static int morse_spi_cmd53_write(struct
- 		/* crc */
- 		*cp = (crc & 0xFF00) >> 8;
- 		*(cp + 1) = (crc & 0xFF);
-+		test_ack = cp + 2;
- 		cp += sizeof(crc);
- 
- 		/* Allow more bytes for status and chip processing (depends on CLK) */
--		cp += block ? mspi->inter_block_delay_bytes : 4;
-+		cp += mspi->inter_block_delay_bytes;
- 	}
- 
- 	/* Do the actual transfer */

feeds/morse/kernel/mm61xx/patches/004-fix-kernel-version-check.patch

@@ -1,13 +0,0 @@
-Index: morse_driver-rel_1_12_3_2024_May_23/sdio.c
-===================================================================
---- morse_driver-rel_1_12_3_2024_May_23.orig/sdio.c
-+++ morse_driver-rel_1_12_3_2024_May_23/sdio.c
-@@ -572,7 +572,7 @@ static int morse_sdio_reset(int reset_pi
- 
- 	sdio_claim_host(func);
- 	sdio_disable_func(func);
--#if KERNEL_VERSION(5, 18, 0) > LINUX_VERSION_CODE
-+#if KERNEL_VERSION(5, 18, 0) > MAC80211_VERSION_CODE
- 	mmc_hw_reset(func->card->host);
- #else
- 	mmc_hw_reset(func->card);

feeds/morse/kernel/mm61xx/patches/007-sysfs-add-sysfs-to-export-board-type-as-a-device-att.patch

@@ -1,160 +0,0 @@
-From 9ebc9a01e90f65f058ed21d3190800dc130b6ef4 Mon Sep 17 00:00:00 2001
-From: Arien Judge <arien.judge@morsemicro.com>
-Date: Wed, 28 Feb 2024 13:29:28 +1100
-Subject: [PATCH] sysfs: add sysfs to export board type as a device attribute
-
-The driver reads the board type from OTP to decide which bcf file to load,
-but doesn't report this information anywhere useful.
-
-Read the value read from OTP as a sysfs device attribute to allow userspace
-applications to reliably report the module type on chip.
-
-Opted for creating a proper sysfs device attribute here instead of using
-debugfs as we shouldn't expect user tooling to have such a hard dependency
-
-cache board id on firmware init for sysfs reporting
----
- Makefile   |  1 +
- firmware.c |  3 +++
- mac.c      |  6 ++++++
- morse.h    |  1 +
- sysfs.c    | 46 ++++++++++++++++++++++++++++++++++++++++++++++
- sysfs.h    |  9 +++++++++
- 6 files changed, 66 insertions(+)
- create mode 100644 sysfs.c
- create mode 100644 sysfs.h
-
-Index: morse_driver-rel_1_12_3_2024_May_23/Makefile
-===================================================================
---- morse_driver-rel_1_12_3_2024_May_23.orig/Makefile
-+++ morse_driver-rel_1_12_3_2024_May_23/Makefile
-@@ -96,6 +96,7 @@ endif
- obj-$(CONFIG_WLAN_VENDOR_MORSE) += morse.o dot11ah/
- 
- morse-y = mac.o
-+morse-y += sysfs.o
- morse-y += init.o
- morse-y += skbq.o
- morse-y += debug.o
-Index: morse_driver-rel_1_12_3_2024_May_23/firmware.c
-===================================================================
---- morse_driver-rel_1_12_3_2024_May_23.orig/firmware.c
-+++ morse_driver-rel_1_12_3_2024_May_23/firmware.c
-@@ -881,6 +881,9 @@ int morse_firmware_init(struct morse *mo
- 	if (mors->cfg->get_board_type && enable_otp_check)
- 		board_id = mors->cfg->get_board_type(mors);
- 
-+	/* store the board id for sysfs reporting. Propagate the error */
-+	mors->board_id = board_id;
-+
- 	if (strlen(board_config_file) > 0) {
- 		n = snprintf(bcf_path, sizeof(bcf_path), "%s/%s", MORSE_FW_DIR, board_config_file);
- 	} else if (strlen(mors->board_serial) > 0) {
-Index: morse_driver-rel_1_12_3_2024_May_23/mac.c
-===================================================================
---- morse_driver-rel_1_12_3_2024_May_23.orig/mac.c
-+++ morse_driver-rel_1_12_3_2024_May_23/mac.c
-@@ -14,6 +14,7 @@
- #include "mac.h"
- #include "s1g_ies.h"
- #include "bus.h"
-+#include "sysfs.h"
- #include "debug.h"
- #include "command.h"
- #include "vendor.h"
-@@ -6422,6 +6423,10 @@ int morse_mac_register(struct morse *mor
- 	INIT_WORK(&mors->driver_restart, morse_mac_restart_work);
- 	INIT_WORK(&mors->health_check, morse_health_check_work);
- 
-+	ret = morse_sysfs_init(mors);
-+	if (ret)
-+		MORSE_ERR(mors, "Unable to initialise sysfs\n");
-+
- 	ret = morse_init_debug(mors);
- 	if (ret)
- 		MORSE_ERR(mors, "Unable to create debugfs files\n");
-@@ -6593,6 +6598,7 @@ static void morse_mac_deinit(struct mors
- 
- void morse_mac_unregister(struct morse *mors)
- {
-+	morse_sysfs_free(mors);
- 	morse_deinit_debug(mors);
- 	morse_ps_disable(mors);
- 
-Index: morse_driver-rel_1_12_3_2024_May_23/morse.h
-===================================================================
---- morse_driver-rel_1_12_3_2024_May_23.orig/morse.h
-+++ morse_driver-rel_1_12_3_2024_May_23/morse.h
-@@ -979,6 +979,7 @@ struct morse {
- 	struct morse_debug debug;
- 
- 	char *board_serial;
-+	int board_id;
- 
- 	/* Stored Channel Information, sta_type, enc_mode, RAW */
- 	struct morse_custom_configs custom_configs;
-Index: morse_driver-rel_1_12_3_2024_May_23/sysfs.c
-===================================================================
---- /dev/null
-+++ morse_driver-rel_1_12_3_2024_May_23/sysfs.c
-@@ -0,0 +1,46 @@
-+/*
-+ * Copyright 2024 Morse Micro
-+ *
-+ */
-+
-+#include <linux/sysfs.h>
-+#include "morse.h"
-+#include "sysfs.h"
-+#include "debug.h"
-+
-+static ssize_t board_type_show(struct device *dev,
-+					   struct device_attribute *attr,
-+					   char *buf)
-+{
-+	struct morse *mors = dev_get_drvdata(dev);
-+
-+	if (!mors)
-+		return -EINVAL;
-+
-+	if (mors->board_id < 0)
-+		return mors->board_id;
-+
-+#if KERNEL_VERSION(5, 10, 0) <= LINUX_VERSION_CODE
-+	return sysfs_emit(buf, "%d\n", mors->board_id);
-+#else
-+	return snprintf(buf, PAGE_SIZE, "%d\n", mors->board_id);
-+#endif
-+}
-+
-+static DEVICE_ATTR_RO(board_type);
-+
-+int morse_sysfs_init(struct morse *mors)
-+{
-+	int ret;
-+
-+	ret = device_create_file(mors->dev, &dev_attr_board_type);
-+	if (ret < 0)
-+		MORSE_ERR(mors, "failed to create sysfs file board_type");
-+
-+	return ret;
-+}
-+
-+void morse_sysfs_free(struct morse *mors)
-+{
-+	device_remove_file(mors->dev, &dev_attr_board_type);
-+}
-Index: morse_driver-rel_1_12_3_2024_May_23/sysfs.h
-===================================================================
---- /dev/null
-+++ morse_driver-rel_1_12_3_2024_May_23/sysfs.h
-@@ -0,0 +1,9 @@
-+/*
-+ * Copyright 2024 Morse Micro
-+ *
-+ */
-+
-+#pragma once
-+
-+int morse_sysfs_init(struct morse *mors);
-+void morse_sysfs_free(struct morse *mors);

feeds/morse/kernel/mm61xx/patches/010-fix-sdio-error.patch

@@ -1,13 +0,0 @@
---- a/sdio.c
-+++ b/sdio.c
-@@ -587,9 +587,5 @@ static int morse_sdio_reset(int reset_pi
-	sdio_claim_host(func);
-	sdio_disable_func(func);
--#if KERNEL_VERSION(5, 18, 0) > MAC80211_VERSION_CODE
-	mmc_hw_reset(func->card->host);
--#else
--	mmc_hw_reset(func->card);
--#endif
-	sdio_enable_func(func);
-	sdio_release_host(func);
-

feeds/morse/kernel/mm61xx/patches/011-update-spi.patch

@@ -1,73 +0,0 @@
---- a/spi.c	2025-01-10 18:08:57.753837165 +0800
-+++ b/spi.c	2025-01-13 14:17:01.746850459 +0800
-@@ -1057,7 +1057,7 @@ static irqreturn_t morse_spi_irq_handler
-	struct morse *mors = spi_get_drvdata(mspi->spi);
-
-	MORSE_WARN_ON(FEATURE_ID_SPI, !mors);
--	if (irq == gpio_to_irq(mors->cfg->mm_spi_irq_gpio)) {
-+
-		/*
-		 * If we are using edge interrupts, we need to continuously service the IRQ until
-		 * either the chip has cleared all its IRQ bits, or the pin goes high again.
-@@ -1067,8 +1067,7 @@ static irqreturn_t morse_spi_irq_handler
-		} while (spi_use_edge_irq && ret && !gpio_get_value(mors->cfg->mm_spi_irq_gpio));
-
-		return IRQ_HANDLED;
--	}
--	return IRQ_NONE;
-+
- }
-
- static void morse_spi_enable_irq(struct morse_spi *mspi)
-@@ -1311,10 +1310,15 @@ static int morse_spi_probe(struct spi_de
-		ret = morse_spi_cmd(mspi, SD_IO_MORSE_INIT, 0x00000000);
-		if (!ret)
-			break;
--		pr_info("%s: SD_IO_RESET\n", __func__);
-+		MORSE_DBG(mors, "%s: SD_IO_RESET\n", __func__);
-		morse_spi_cmd(mspi, SD_IO_RESET, 0x00000000);
-	}
-
-+	if (ret) {
-+		MORSE_SPI_ERR(mors, "failed initialise SPI: %d\n", ret);
-+		goto err_cfg;
-+	}
-+
-	ret = morse_chip_cfg_detect_and_init(mors, mors_chip_series);
-	if (ret) {
-		MORSE_SPI_ERR(mors, "morse_chip_cfg_detect_and_init failed: %d\n", ret);
-@@ -1327,7 +1331,11 @@ static int morse_spi_probe(struct spi_de
-	mors->cfg->mm_ps_gpios_supported = true;
-	ret = morse_spi_reg32_read(mors, MORSE_REG_CHIP_ID(mors), &mors->chip_id);
-
--	if (!ret) {
-+	if (ret) {
-+		MORSE_SPI_ERR(mors, "failed to read chip id: %d\n", ret);
-+		goto err_cfg;
-+	}
-+
-		/* Find out if the chip id matches our records */
-		if (!morse_hw_is_valid_chip_id(mors->chip_id, mors->cfg->valid_chip_ids)) {
-			MORSE_SPI_ERR(mors, "%s Morse chip (ChipId=0x%x) not supported\n",
-@@ -1357,9 +1365,6 @@ static int morse_spi_probe(struct spi_de
-								mspi->inter_block_delay_bytes);
-			}
-		}
--	} else {
--		goto err_cfg;
--	}
-
-	MORSE_SPI_INFO(mors, "Morse Micro SPI device found, chip ID=0x%04x\n", mors->chip_id);
-	MORSE_SPI_INFO(mors, "Board serial: %s\n", mors->board_serial);
-@@ -1442,6 +1447,11 @@ static int morse_spi_probe(struct spi_de
- #ifdef CONFIG_MORSE_ENABLE_TEST_MODES
-	if (test_mode == MORSE_CONFIG_TEST_MODE_BUS)
-		ret = morse_bus_test(mors, "SPI");
-+
-+	if (test_mode == MORSE_CONFIG_TEST_MODE_BUS_PROFILE) {
-+		morse_bus_throughput_profiler(mors);
-+		morse_spi_disable_irq(mspi);
-+	}
- #endif
- 
- 	return ret;

feeds/morse/kernel/morse-fw/LICENSE.binaries

@@ -1,125 +0,0 @@
-                                  MORSE MICRO
-                     BINARY DISTRIBUTION LICENSE AGREEMENT
-
-1. Parties.
-This Software License Agreement (SLA) is between Morse Micro Pty. Ltd. and the
-user of the Software set forth (“you”, “user”, “customer”), and is effective as
-of the date of first access or download of the software by you. Morse Micro is
-licensing this software to you free of charge upon the condition that you
-accept all the terms of this SLA and only use this Software in conjunction with
-Morse Micro products. ANY USE, REPRODUCTION, OR DISTRIBUTION OF THE SOFTWARE
-CONSTITUTES YOUR ACCEPTANCE OF THIS AGREEMENT.
-
-2. Definitions.
-"Software" means any binary or source code that you have received from Morse
-Micro or its authorized licensees and/or those portions of such software
-produced by Program’s code within the Software, as well as any other machine
-readable materials (including, but not limited to, libraries, source files,
-header files, and data files), any updates or error corrections provided by
-Morse Micro, and any user manuals, programming guides and other documentation
-provided to you by Morse Micro under this SLA.
-
-3. License and Restrictions.
-Morse Micro grants you a non-exclusive, non-transferable, limited license
-without license fees to:
-
-    a. use the software solely with a hardware product that includes one of the
-    Morse Micro Wi-Fi HaLow chips, including
-    wireless modules or evaluation kits;
-
-    b. to reproduce and distribute the Software complete, unmodified, and as
-    provided by Morse Micro, solely for use with a hardware product that
-    includes one of the Morse Micro Wi-Fi HaLow chips, including wireless
-    modules or evaluation kits.
-
-4. Reservation of Rights.
-You should distribute Software with a copy of this SLA. Software is
-copyrighted. Title to Software and all associated intellectual property rights
-is retained by Morse Micro. Except as expressly provided herein, no license or
-right, express or implied, is hereby conveyed or granted to you by Morse Micro.
-You must retain all copyright notices on all Software, derivative works and
-documentation. The intellectual property and proprietary rights of whatever
-nature in the Software and derivative works are and will remain the exclusive
-property of Morse Micro or its suppliers. Nothing in this Agreement should be
-construed as transferring any aspects of such rights to you or any third party.
-Morse Micro and its suppliers reserve any and all rights not expressly granted
-in this Agreement. You may not sell, assign, sublicense, lease, or otherwise
-transfer any part of this license. You must not:
-
-    a. use, license, sell or otherwise distribute the Software except as
-    provided in this SLA;
-
-    b. attempt to modify in any way, reverse engineer, decompile or disassemble
-    any portion of the Software;
-
-    c. use the Software or other material in violation of any applicable law or
-    regulation, including but not limited to any regulatory agency.
-
-5. Ownership.
-The Software is licensed and not sold.  Title to and ownership of the Software,
-including all intellectual property rights thereto, and any portion thereof
-remain with Morse Micro or its licensors. You hereby covenant that you will not
-assert any claim that the Software created by or for Morse Micro infringe any
-intellectual property right owned or controlled by you.
-
-6. Termination.
-This SLA will terminate immediately without notice from Morse Micro if you fail
-to comply with any of its provisions, including the export laws provisions and
-Section 10 that may govern the export of the Software from certain
-jurisdictions, including technical data.
-
-7. Disclaimer and Limitation of Liability.
-THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MORSE MICRO
-FURTHER DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT
-LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE OR NON-INFRINGEMENT. IN NO EVENT SHALL MORSE MICRO BE LIABLE FOR ANY
-INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES
-FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR ANY THIRD
-PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF MORSE MICRO HAS BEEN
-ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOFTWARE IS NOT INTENDED FOR
-USE IN ENVIRONMENTS OR APPLICATIONS WHERE EXTRAORDINARILY HIGH LEVELS OF
-QUALITY, RELIABILITY, AND FAILURE TOLERANCE ARE DEMANDED, AND/OR WHERE A
-MALFUNCTION OR FAILURE COULD LEAD TO SIGNIFICANT HARM TO LIFE, HEALTH,
-PROPERTY, OR RESULT IN SEVERE SOCIETAL REPERCUSSIONS ("CRITICAL APPLICATIONS").
-CRITICAL APPLICATIONS ENCOMPASS, BUT ARE NOT LIMITED TO, EQUIPMENT UTILIZED IN
-NUCLEAR FACILITIES, AVIATION AND SPACE EQUIPMENT, MEDICAL DEVICES, AUTOMOTIVE,
-TRAIN, MARINE, AND OTHER TRANSPORTATION EQUIPMENT, DEVICES INVOLVED IN
-CONTROLLING COMBUSTION OR EXPLOSIONS, SAFETY DEVICES, ELEVATORS AND ESCALATORS,
-DEVICES ASSOCIATED WITH ELECTRIC POWER, AND EQUIPMENT USED IN FINANCE-RELATED
-FIELDS.
-
-8. Survival.
-Sections 4, 5, 6, 7 and 10 will survive termination or expiration of this SLA.
-
-9. Privacy.
-Some features of the Software, if activated, may transmit a limited amount of
-data to Morse Micro (or its service provider) about the status of the system
-before a crash event. Morse Micro does not associate the data with personally
-identifiable information.
-
-10. Export Laws.
-YOU UNDERSTAND AND AGREE THAT THE SOFTWARE IS SUBJECT TO ALL APPLICABLE EXPORT-
-RELATED LAWS AND REGULATIONS AND THAT YOU MAY NOT EXPORT, RE-EXPORT OR TRANSFER
-THE SOFTWARE OR ANY DIRECT PRODUCT OF THE SOFTWARE EXCEPT AS PERMITTED UNDER
-THOSE LAWS. WITHOUT LIMITING THE FOREGOING, EXPORT, RE-EXPORT, OR TRANSFER OF
-THE SOFTWARE TO CUBA, IRAN, NORTH KOREA, SUDAN, AND SYRIA IS PROHIBITED.
-
-11. Governing Law.
-The laws of New South Wales, Australia, govern all matters arising out of or
-relating to this SLA without giving effect to any conflict of law principles.
-If any provision of this SLA is held to be unenforceable, this SLA will remain
-in effect with the provision omitted, unless omission would frustrate the
-intent of the parties, in which case this Agreement will immediately terminate.
-
-12. Entire Agreement.
-This Agreement constitutes the entire agreement between the parties and
-supersedes all prior and contemporaneous agreements, proposals or
-representations, written or oral, concerning its subject matter. No
-modification, amendment, or waiver of any provision of this Agreement will be
-effective unless in writing and either signed or accepted electronically by the
-party against whom the modification, amendment or waiver is to be asserted. A
-waiver of any breach under this Agreement does not constitute a waiver of any
-other breach or future breach.
-
-
-MORSE MICRO

feeds/morse/kernel/morse-fw/Makefile

@@ -1,53 +0,0 @@
-#
-# Copyright 2022 Morse Micro
-#
-# This is free software, licensed under the MIT License.
-#
-# This package installs Morse Micro firmware binaries, which are
-# distributed under the Morse Micro Binary Distribution License.
-# This license is available in LICENSE.binaries.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=morse-fw
-PKG_RELEASE=2
-
-PKG_VERSION:=rel_1_11_4_2024_Jul_09
-
-PKG_SOURCE:=morsemicro-fw-rel_1_11_4_2024_Jul_09.tar
-PKG_SOURCE_URL:=https://github.com/MorseMicro/firmware_binaries/releases/download/v1.11.4/
-PKG_HASH:=6df1e39655278adf140776b3e76b8faced41828a9d482363aed0795e96f5d241
-
-PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
-PKG_BUILD_PARALLEL:=1
-
-RSTRIP:=:
-
-include $(INCLUDE_DIR)/kernel.mk
-include $(INCLUDE_DIR)/package.mk
-
-define Package/morse-fw
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  TITLE:=Morse Micro WIFI HaLow firmware
-  PROVIDES:=morse-fw
-endef
-
-TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
-
-define Build/Compile
-
-endef
-
-define Package/morse-fw/install
-	$(INSTALL_DIR) $(1)/lib/firmware/morse/.
-	if [ -e ./files/lib/firmware/morse/mm6108.bin ]; then \
-		$(INSTALL_DATA) ./files/lib/firmware/morse/mm6108.bin $(1)/lib/firmware/morse/; \
-	else \
-		$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/firmware/morse/mm6108.bin $(1)/lib/firmware/morse/; \
-	fi
-endef
-
-$(eval $(call BuildPackage,morse-fw))

feeds/morse/morse-regdb/Makefile

@@ -1,68 +0,0 @@
-#
-# Copyright 2023 Morse Micro
-#
-# This is free software, licensed under the 3-Clause BSD License.
-#
-
-# Because the contents of morse_regdb are private, this package does
-# some tricky things to _avoid_ downloading under normal circumstances,
-# instead using a cached file stored in this repository. If you'd like
-# to regenerate the cached file, do:
-#
-#   make package/morse-regdb/clean package/morse-regdb/download package/morse-regdb/compile V=sc REGENERATE=1
-#
-include $(TOPDIR)/rules.mk
-
-
-PKG_NAME:=morse-regdb
-PKG_RELEASE:=1
-PKG_BUILD_DEPENDS:=python3/host
-
-PKG_SOURCE_VERSION:=v2.1.1
-PKG_SOURCE_URL:=https://github.com/MorseMicro/morse_regdb.git
-PKG_SOURCE_PROTO:=git
-PKG_MIRROR_HASH:=0d074d2810f520c138427ab63ce0b8ab61f0f073cf7cd91177ad840a3322540a
-
-PKG_VERSION:=$(PKG_SOURCE_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-# Skip download unless REGENERATE is on.
-# This must occur after including package.mk, as PKG_SKIP_DOWNLOAD is defined there.
-PKG_SKIP_DOWNLOAD=$(USE_SOURCE_DIR)$(USE_GIT_TREE)$(USE_GIT_SRC_CHECKOUT)$(if $(REGENERATE),,1)
-
-define Package/morse-regdb
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Regulatory data for 802.11ah
-  URL:=https://bitbucket.org/morsemicro/morse_regdb/src/master/
-  PKGARCH:=all
-endef
-
-define Package/morse-regdb/description
-	Regulatory data for 802.11ah in a csv.
-endef
-
-define Build/Prepare
-	$(if $(REGENERATE),$(call Build/Prepare/Default))
-endef
-
-define Build/Compile
-	$(if $(REGENERATE),
-		mkdir -p artefacts
-		python3 $(PKG_BUILD_DIR)/regdbconverter.py -v -f csv $(PKG_BUILD_DIR)/regdb_Sub-1_GHz.tsv > artefacts/repo_channels.csv
-	)
-	mkdir -p $(PKG_BUILD_DIR)/artefacts
-	# Mash the 5g shim channels in.
-	python3 add_5g_shim_channels.py < artefacts/repo_channels.csv > $(PKG_BUILD_DIR)/artefacts/channels.csv
-endef
-
-define Package/morse-regdb/install
-	$(INSTALL_DIR) $(1)/usr/share/morse-regdb
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/artefacts/* $(1)/usr/share/morse-regdb
-	# Make channels.csv accessible from the web.
-	$(INSTALL_DIR) $(1)/www
-	ln -sf /usr/share/morse-regdb/channels.csv $(1)/www/halow-channels.csv
-endef
-
-$(eval $(call BuildPackage,morse-regdb))

feeds/morse/morse-regdb/add_5g_shim_channels.py

@@ -1,88 +0,0 @@
-#!/usr/bin/env python3
-
-
-import csv
-import sys
-
-# Fake 5g channels reported by netlink instead of 1g channels.
-S1G_TO_5G= {
-    1: 132,
-    2: 134,
-    3: 136,
-    4: 'NA',
-    5: 36,
-    6: 38,
-    7: 40,
-    8: 42,
-    9: 44,
-    10: 46,
-    11: 48,
-    12: 50,
-    13: 52,
-    14: 54,
-    15: 56,
-    16: 58,
-    17: 60,
-    18: 62,
-    19: 64,
-    20: 'NA',
-    21: 100,
-    22: 102,
-    23: 104,
-    24: 106,
-    25: 108,
-    26: 110,
-    27: 112,
-    28: 114,
-    29: 116,
-    30: 118,
-    31: 120,
-    32: 122,
-    33: 124,
-    34: 126,
-    35: 128,
-    36: 'NA',
-    37: 149,
-    38: 151,
-    39: 153,
-    40: 155,
-    41: 157,
-    42: 159,
-    43: 161,
-    44: 163,
-    45: 165,
-    46: 167,
-    47: 169,
-    48: 171,
-    49: 173,
-    50: 175,
-    51: 177,
-}
-
-# Japanese channels are... different.
-JAPAN_S1G_TO_5G = {
-    9: 108,
-    13: 36,
-    15: 40,
-    17: 44,
-    19: 48,
-    21: 64,
-    2: 38,
-    6: 46,
-    4: 54,
-    8: 62,
-    36: 42,
-    38: 58,
-}
-
-
-dr = csv.DictReader(sys.stdin)
-dw = csv.DictWriter(sys.stdout, dr.fieldnames + ['5g_chan'], lineterminator='\n')
-dw.writeheader()
-for row in dr:
-     m = JAPAN_S1G_TO_5G if row['country_code'] == 'JP' else S1G_TO_5G
-     row['5g_chan'] = m.get(int(row['s1g_chan']))
-
-     assert row['5g_chan'], f'Missing 5G chan map for Channel {row["s1g_chan"]} in {row["country_code"]}'
-
-     dw.writerow(row)

feeds/morse/morse-regdb/artefacts/repo_channels.csv

@@ -1,473 +0,0 @@
-country_code,bw,s1g_chan,s1g_op_class,global_op_class,centre_freq_mhz,duty_cycle_ap,duty_cycle_sta,country,tx_power_max,duty_cycle_omit_ctrl_resp,pkt_spacing_ms,airtime_min_ms,airtime_max_ms,usable_banff_c
-AL,1,1,6,66,863.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
-AL,1,3,6,66,864.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
-AL,1,5,6,66,865.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
-AL,1,7,6,66,866.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
-AL,1,9,6,66,867.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
-AR,1,27,1,68,915.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,29,1,68,916.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,31,1,68,917.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,33,1,68,918.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,35,1,68,919.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,37,1,68,920.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,39,1,68,921.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,41,1,68,922.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,43,1,68,923.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,45,1,68,924.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,47,1,68,925.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,49,1,68,926.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,1,51,1,68,927.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,2,30,2,69,917.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,2,34,2,69,919.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,2,38,2,69,921.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,2,42,2,69,923.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,2,46,2,69,925.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,2,50,2,69,927.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,4,32,3,70,918.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,4,40,3,70,922.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,4,48,3,70,926.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AR,8,44,4,71,924.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
-AT,1,1,6,66,863.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
-AT,1,3,6,66,864.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
-AT,1,5,6,66,865.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
-AT,1,7,6,66,866.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
-AT,1,9,6,66,867.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
-AU,1,27,22,68,915.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,29,22,68,916.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,31,22,68,917.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,33,22,68,918.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,35,22,68,919.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,37,22,68,920.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,39,22,68,921.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,41,22,68,922.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,43,22,68,923.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,45,22,68,924.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,47,22,68,925.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,49,22,68,926.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,1,51,22,68,927.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,2,30,23,69,917.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,2,34,23,69,919.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,2,38,23,69,921.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,2,42,23,69,923.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,2,46,23,69,925.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,2,50,23,69,927.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,4,32,24,70,918.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,4,40,24,70,922.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,4,48,24,70,926.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-AU,8,44,25,71,924.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
-BA,1,1,6,66,863.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
-BA,1,3,6,66,864.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
-BA,1,5,6,66,865.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
-BA,1,7,6,66,866.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
-BA,1,9,6,66,867.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
-BE,1,1,6,66,863.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BE,1,3,6,66,864.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BE,1,5,6,66,865.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BE,1,7,6,66,866.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BE,1,9,6,66,867.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BE,1,31,30,77,916.9,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BE,1,33,30,77,917.9,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BE,1,35,30,77,918.9,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
-BG,1,1,6,66,863.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
-BG,1,3,6,66,864.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
-BG,1,5,6,66,865.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
-BG,1,7,6,66,866.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
-BG,1,9,6,66,867.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
-BG,1,33,30,77,917.9,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
-BG,1,35,30,77,918.9,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
-BR,1,1,1,68,902.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,0
-BR,1,3,1,68,903.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,5,1,68,904.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,7,1,68,905.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,9,1,68,906.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,2,2,2,69,903.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,0
-BR,2,6,2,69,905.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,27,1,68,915.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,29,1,68,916.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,31,1,68,917.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,33,1,68,918.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,35,1,68,919.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,37,1,68,920.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,39,1,68,921.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,41,1,68,922.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,43,1,68,923.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,45,1,68,924.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,47,1,68,925.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,49,1,68,926.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,1,51,1,68,927.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,2,30,2,69,917.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,2,34,2,69,919.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,2,38,2,69,921.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,2,42,2,69,923.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,2,46,2,69,925.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,2,50,2,69,927.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,4,32,3,70,918.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,4,40,3,70,922.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,4,48,3,70,926.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-BR,8,44,4,71,924.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
-CA,1,1,1,68,902.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,0
-CA,1,3,1,68,903.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,5,1,68,904.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,7,1,68,905.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,9,1,68,906.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,11,1,68,907.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,13,1,68,908.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,15,1,68,909.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,17,1,68,910.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,19,1,68,911.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,21,1,68,912.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,23,1,68,913.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,25,1,68,914.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,27,1,68,915.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,29,1,68,916.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,31,1,68,917.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,33,1,68,918.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,35,1,68,919.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,37,1,68,920.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,39,1,68,921.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,41,1,68,922.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,43,1,68,923.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,45,1,68,924.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,47,1,68,925.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,49,1,68,926.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,1,51,1,68,927.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,2,2,69,903.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,0
-CA,2,6,2,69,905.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,10,2,69,907.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,14,2,69,909.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,18,2,69,911.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,22,2,69,913.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,26,2,69,915.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,30,2,69,917.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,34,2,69,919.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,38,2,69,921.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,42,2,69,923.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,46,2,69,925.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,2,50,2,69,927.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,4,8,3,70,906.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,4,16,3,70,910.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,4,24,3,70,914.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,4,32,3,70,918.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,4,40,3,70,922.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,4,48,3,70,926.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,8,12,4,71,908.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,8,28,4,71,916.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CA,8,44,4,71,924.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
-CH,1,1,6,66,863.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
-CH,1,3,6,66,864.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
-CH,1,5,6,66,865.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
-CH,1,7,6,66,866.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
-CH,1,9,6,66,867.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
-CY,1,1,6,66,863.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
-CY,1,3,6,66,864.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
-CY,1,5,6,66,865.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
-CY,1,7,6,66,866.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
-CY,1,9,6,66,867.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
-CZ,1,1,6,66,863.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
-CZ,1,3,6,66,864.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
-CZ,1,5,6,66,865.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
-CZ,1,7,6,66,866.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
-CZ,1,9,6,66,867.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
-DD,1,1,6,66,863.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
-DD,1,3,6,66,864.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
-DD,1,5,6,66,865.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
-DD,1,7,6,66,866.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
-DD,1,9,6,66,867.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
-DK,1,1,6,66,863.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
-DK,1,3,6,66,864.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
-DK,1,5,6,66,865.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
-DK,1,7,6,66,866.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
-DK,1,9,6,66,867.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
-EE,1,1,6,66,863.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
-EE,1,3,6,66,864.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
-EE,1,5,6,66,865.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
-EE,1,7,6,66,866.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
-EE,1,9,6,66,867.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
-ES,1,1,6,66,863.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
-ES,1,3,6,66,864.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
-ES,1,5,6,66,865.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
-ES,1,7,6,66,866.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
-ES,1,9,6,66,867.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
-EU,1,1,6,66,863.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
-EU,1,3,6,66,864.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
-EU,1,5,6,66,865.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
-EU,1,7,6,66,866.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
-EU,1,9,6,66,867.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
-FI,1,1,6,66,863.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
-FI,1,3,6,66,864.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
-FI,1,5,6,66,865.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
-FI,1,7,6,66,866.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
-FI,1,9,6,66,867.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
-FI,1,33,30,77,917.9,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
-FI,1,35,30,77,918.9,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
-FL,1,1,6,66,863.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
-FL,1,3,6,66,864.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
-FL,1,5,6,66,865.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
-FL,1,7,6,66,866.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
-FL,1,9,6,66,867.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
-FR,1,1,6,66,863.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
-FR,1,3,6,66,864.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
-FR,1,5,6,66,865.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
-FR,1,7,6,66,866.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
-FR,1,9,6,66,867.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
-FR,1,33,30,77,917.9,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
-FR,1,35,30,77,918.9,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
-GR,1,1,6,66,863.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
-GR,1,3,6,66,864.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
-GR,1,5,6,66,865.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
-GR,1,7,6,66,866.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
-GR,1,9,6,66,867.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
-HR,1,1,6,66,863.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
-HR,1,3,6,66,864.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
-HR,1,5,6,66,865.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
-HR,1,7,6,66,866.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
-HR,1,9,6,66,867.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
-HU,1,1,6,66,863.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
-HU,1,3,6,66,864.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
-HU,1,5,6,66,865.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
-HU,1,7,6,66,866.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
-HU,1,9,6,66,867.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
-IE,1,1,6,66,863.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IE,1,3,6,66,864.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IE,1,5,6,66,865.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IE,1,7,6,66,866.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IE,1,9,6,66,867.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IE,1,31,30,77,916.9,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IE,1,33,30,77,917.9,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IE,1,35,30,77,918.9,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
-IN,1,5,6,66,865.5,10.0,2.8,India,16.13,False,0.0,0.0,0.0,1
-IN,1,7,6,66,866.5,10.0,2.8,India,16.13,False,0.0,0.0,0.0,1
-IN,1,9,6,66,867.5,10.0,2.8,India,16.13,False,0.0,0.0,0.0,1
-IS,1,1,6,66,863.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IS,1,3,6,66,864.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IS,1,5,6,66,865.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IS,1,7,6,66,866.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IS,1,9,6,66,867.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IS,1,31,30,77,916.9,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IS,1,33,30,77,917.9,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IS,1,35,30,77,918.9,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
-IT,1,1,6,66,863.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
-IT,1,3,6,66,864.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
-IT,1,5,6,66,865.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
-IT,1,7,6,66,866.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
-IT,1,9,6,66,867.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
-IT,1,33,30,77,917.9,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
-IT,1,35,30,77,918.9,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
-JP,1,9,8,73,921.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,1,13,8,73,923.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,1,15,8,73,924.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,1,17,8,73,925.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,1,19,8,73,926.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,1,21,8,73,927.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,2,2,9,64,923.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,2,4,10,64,924.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,2,6,9,64,925.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,2,8,10,64,926.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,4,36,11,65,924.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-JP,4,38,12,65,925.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
-KE,1,1,6,66,863.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
-KE,1,3,6,66,864.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
-KE,1,5,6,66,865.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
-KE,1,7,6,66,866.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
-KE,1,9,6,66,867.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
-KR,1,1,14,74,918.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
-KR,1,3,14,74,919.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
-KR,1,5,14,74,920.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
-KR,1,7,14,74,921.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
-KR,1,9,14,74,922.0,100.0,100.0,South Korea,10.0,False,50.0,0.0,4000.0,1
-KR,1,11,14,74,923.0,100.0,100.0,South Korea,10.0,False,50.0,0.0,4000.0,1
-KR,2,2,15,75,918.5,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
-KR,2,6,15,75,920.5,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
-KR,2,10,15,75,922.5,100.0,100.0,South Korea,10.0,False,50.0,0.0,4000.0,1
-KR,4,8,16,76,921.5,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
-KR,1,18,14,74,926.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
-KR,1,20,14,74,927.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
-KR,1,22,14,74,928.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
-KR,1,24,14,74,929.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
-KR,2,19,15,75,927.0,100.0,100.0,South Korea,20.0,False,0.264,0.0,220.0,0
-KR,2,23,15,75,929.0,100.0,100.0,South Korea,20.0,False,0.264,0.0,220.0,0
-LT,1,1,6,66,863.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LT,1,3,6,66,864.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LT,1,5,6,66,865.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LT,1,7,6,66,866.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LT,1,9,6,66,867.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LT,1,31,30,77,916.9,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LT,1,33,30,77,917.9,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LT,1,35,30,77,918.9,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
-LU,1,1,6,66,863.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
-LU,1,3,6,66,864.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
-LU,1,5,6,66,865.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
-LU,1,7,6,66,866.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
-LU,1,9,6,66,867.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
-LV,1,1,6,66,863.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
-LV,1,3,6,66,864.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
-LV,1,5,6,66,865.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
-LV,1,7,6,66,866.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
-LV,1,9,6,66,867.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
-MD,1,1,6,66,863.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MD,1,3,6,66,864.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MD,1,5,6,66,865.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MD,1,7,6,66,866.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MD,1,9,6,66,867.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MD,1,31,30,77,916.9,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MD,1,33,30,77,917.9,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MD,1,35,30,77,918.9,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
-MK,1,1,6,66,863.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MK,1,3,6,66,864.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MK,1,5,6,66,865.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MK,1,7,6,66,866.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MK,1,9,6,66,867.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MK,1,31,30,77,916.9,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MK,1,33,30,77,917.9,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MK,1,35,30,77,918.9,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
-MT,1,1,6,66,863.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
-MT,1,3,6,66,864.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
-MT,1,5,6,66,865.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
-MT,1,7,6,66,866.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
-MT,1,9,6,66,867.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
-NL,1,1,6,66,863.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
-NL,1,3,6,66,864.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
-NL,1,5,6,66,865.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
-NL,1,7,6,66,866.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
-NL,1,9,6,66,867.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
-NO,1,1,6,66,863.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
-NO,1,3,6,66,864.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
-NO,1,5,6,66,865.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
-NO,1,7,6,66,866.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
-NO,1,9,6,66,867.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
-NZ,1,27,26,68,915.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,1,29,26,68,916.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,1,31,26,68,917.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,1,33,26,68,918.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,1,35,26,68,919.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,1,37,26,68,920.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,1,39,26,68,921.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,1,41,26,68,922.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,1,43,26,68,923.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,1,45,26,68,924.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,1,47,26,68,925.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,1,49,26,68,926.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,1,51,26,68,927.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,2,30,27,69,917.0,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,2,34,27,69,919.0,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,2,38,27,69,921.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,2,42,27,69,923.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,2,46,27,69,925.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,2,50,27,69,927.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,4,32,28,70,918.0,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
-NZ,4,40,28,70,922.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,4,48,28,70,926.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-NZ,8,44,29,71,924.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
-PL,1,1,6,66,863.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
-PL,1,3,6,66,864.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
-PL,1,5,6,66,865.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
-PL,1,7,6,66,866.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
-PL,1,9,6,66,867.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
-PT,1,1,6,66,863.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-PT,1,3,6,66,864.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-PT,1,5,6,66,865.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-PT,1,7,6,66,866.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-PT,1,9,6,66,867.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-PT,1,31,30,77,916.9,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-PT,1,33,30,77,917.9,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-PT,1,35,30,77,918.9,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
-RO,1,1,6,66,863.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
-RO,1,3,6,66,864.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
-RO,1,5,6,66,865.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
-RO,1,7,6,66,866.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
-RO,1,9,6,66,867.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
-SE,1,1,6,66,863.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SE,1,3,6,66,864.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SE,1,5,6,66,865.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SE,1,7,6,66,866.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SE,1,9,6,66,867.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SE,1,31,30,77,916.9,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SE,1,33,30,77,917.9,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SE,1,35,30,77,918.9,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
-SG,1,7,17,66,866.5,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
-SG,1,9,17,66,867.5,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
-SG,1,11,17,66,868.5,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
-SG,2,10,19,67,868.0,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
-SG,1,37,18,68,920.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SG,1,39,18,68,921.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SG,1,41,18,68,922.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SG,1,43,18,68,923.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SG,1,45,18,68,924.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SG,2,38,20,69,921.0,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SG,2,42,20,69,923.0,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SG,4,40,21,70,922.0,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
-SI,1,1,6,66,863.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SI,1,3,6,66,864.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SI,1,5,6,66,865.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SI,1,7,6,66,866.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SI,1,9,6,66,867.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SI,1,31,30,77,916.9,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SI,1,33,30,77,917.9,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SI,1,35,30,77,918.9,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
-SK,1,1,6,66,863.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
-SK,1,3,6,66,864.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
-SK,1,5,6,66,865.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
-SK,1,7,6,66,866.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
-SK,1,9,6,66,867.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
-TR,1,1,6,66,863.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
-TR,1,3,6,66,864.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
-TR,1,5,6,66,865.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
-TR,1,7,6,66,866.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
-TR,1,9,6,66,867.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
-TR,1,33,30,77,917.9,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
-TR,1,35,30,77,918.9,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
-UK,1,1,6,66,863.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
-UK,1,3,6,66,864.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
-UK,1,5,6,66,865.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
-UK,1,7,6,66,866.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
-UK,1,9,6,66,867.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
-UK,1,33,30,77,917.9,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
-UK,1,35,30,77,918.9,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
-US,1,1,1,68,902.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,0
-US,1,3,1,68,903.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,5,1,68,904.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,7,1,68,905.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,9,1,68,906.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,11,1,68,907.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,13,1,68,908.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,15,1,68,909.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,17,1,68,910.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,19,1,68,911.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,21,1,68,912.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,23,1,68,913.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,25,1,68,914.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,27,1,68,915.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,29,1,68,916.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,31,1,68,917.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,33,1,68,918.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,35,1,68,919.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,37,1,68,920.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,39,1,68,921.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,41,1,68,922.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,43,1,68,923.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,45,1,68,924.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,47,1,68,925.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,49,1,68,926.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,1,51,1,68,927.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,2,2,69,903.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,0
-US,2,6,2,69,905.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,10,2,69,907.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,14,2,69,909.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,18,2,69,911.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,22,2,69,913.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,26,2,69,915.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,30,2,69,917.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,34,2,69,919.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,38,2,69,921.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,42,2,69,923.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,46,2,69,925.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,2,50,2,69,927.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,4,8,3,70,906.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,4,16,3,70,910.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,4,24,3,70,914.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,4,32,3,70,918.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,4,40,3,70,922.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,4,48,3,70,926.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,8,12,4,71,908.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,8,28,4,71,916.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
-US,8,44,4,71,924.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1

feeds/morse/morse-regdb/patches/001-add_column_usable_bannf_c.patch

@@ -1,36 +0,0 @@
-From 6c0733b125434b846bec2a744a812c890c82518d Mon Sep 17 00:00:00 2001
-From: Takura Mapani <takura.mapani@morsemicro.com>
-Date: Tue, 19 Sep 2023 03:25:45 +0000
-Subject: [PATCH] Merged in APP-1819_add_usable_by_bannf_column (pull request
- #17)
-
-APP-1819 add a new column usable bannfC for the csv output
-
-* added new column usable bannfC for the csv output
-
-
-Approved-by: Arien Judge
-Approved-by: David Goodall
-Approved-by: Matthew Forgie
-Approved-by: Thomas Flynn
-Approved-by: Matt Jervis
----
- regdbconverter.py | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/regdbconverter.py b/regdbconverter.py
-index 883f281..4bd44b1 100755
---- a/regdbconverter.py
-+++ b/regdbconverter.py
-@@ -311,7 +311,7 @@ def _output_channels_python(channels, out_file, args):
- 
- def _output_channels_csv(channels, out_file, args):
-     fields = ['country_code', 'bw', 's1g_chan', 's1g_op_class', 'global_op_class', 'centre_freq_mhz', 'duty_cycle_ap', 'duty_cycle_sta',
--              'country', 'tx_power_max', 'duty_cycle_omit_ctrl_resp', 'pkt_spacing_ms', 'airtime_min_ms', 'airtime_max_ms']
-+              'country', 'tx_power_max', 'duty_cycle_omit_ctrl_resp', 'pkt_spacing_ms', 'airtime_min_ms', 'airtime_max_ms', 'usable_banff_c']
- 
-     dw = DictWriter(out_file, fields, extrasaction='ignore', lineterminator='\n')
-     dw.writeheader()
--- 
-2.25.1
-

feeds/morse/netifd-morse/Makefile

@@ -1,41 +0,0 @@
-#
-# Copyright 2022 Morse Micro
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=netifd-morse
-PKG_RELEASE=1
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/netifd-morse
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Morse Micro HaLow support for netifd
-  DEPENDS:= netifd \
-	+@BUSYBOX_CONFIG_USLEEP +@BUSYBOX_CONFIG_BASE64 +@BUSYBOX_CONFIG_XXD \
-	+kmod-morse +kmod-cfg80211 \
-	+morse-regdb +wpa_event_listener +wpa_supplicant_s1g +hostapd_s1g +morsecli
-endef
-
-define Build/Compile
-endef
-
-define Package/netifd-morse/install
-	$(INSTALL_DIR) $(1)/lib/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(CP) ./lib/* $(1)/lib/
-	$(INSTALL_BIN) ./etc/init.d/halow-gpio-reset $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,netifd-morse))

feeds/morse/netifd-morse/etc/init.d/halow-gpio-reset

@@ -1,28 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006-2011 OpenWrt.org
-
-START=09
-
-. /lib/functions.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-boot() {
-	. /lib/functions.sh
-	. /lib/functions/uci-defaults.sh
-	. /lib/functions/system.sh
-
-	board=$(board_name)
-
-	case "$board" in
-	edgecore,eap112)
-   
-		echo 486 > /sys/class/gpio/export
-		echo "out" > /sys/class/gpio/gpio486/direction
-		echo 0 > /sys/class/gpio/gpio486/value
-		sleep 1
-		echo "in" > /sys/class/gpio/gpio486/direction
-		echo 486 > /sys/class/gpio/unexport    
-
-	esac
-}

feeds/morse/netifd-morse/lib/netifd/morse/morse_utils.sh

@@ -1,161 +0,0 @@
-kill_wait()
-{
-	local names=$*
-	local count=30
-
-	for pid in $(pidof $names)
-	do
-		kill $pid &> /dev/null
-	done
-
-	while pidof $names &> /dev/null;
-	do
-		usleep 100000
-		let "count--"
-		if [ $count -eq 0 ]
-		then
-			echo "$names failed to terminate normally, force quitting" >&2
-			kill -9 $(pidof $names)
-			return 1
-		fi
-	done
-	return 0
-}
-
-_list_phy_interfaces() {
-	local phy="$1"
-	if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
-		ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
-	else
-		ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
-	fi
-}
-
-list_phy_interfaces() {
-	local phy="$1"
-
-	for dev in $(_list_phy_interfaces "$phy"); do
-		readlink "/sys/class/net/${dev}/phy80211" | grep -q "/${phy}\$" || continue
-	done
-}
-
-num_test()
-{
-	case $1 in
-		''|*[!0-9]*)
-			return 1
-			;;
-		*)
-			;;
-	esac
-	return 0
-}
-
-_get_regulatory() {
-	local _mode=$1
-	local _country=$2
-	local _channel=$3
-	local _op_class=$4
-
-	local dc_min="0.01"
-	local dc_max="100.00"
-	local cc; local bw; local l_op; local g_op;
-	local freq; local dc_ap; local dc_sta;
-
-	oIFS=$IFS
-	HEADER=1
-	while IFS=, read -r cc bw ch l_op g_op freq remainder; do
-		if [ $HEADER = 1 ]; then
-			HEADER=0
-			continue
-		fi
-		num_test $bw
-		[ $? -eq 1 ] 		&& continue
-		num_test $ch
-		[ $? -eq 1 ] 		&& continue
-		num_test $l_op
-		[ $? -eq 1 ] 		&& continue
-		num_test $g_op
-		[ $? -eq 1 ] 		&& continue
-
-		if [ "$cc" == "$_country" ] && [ "$ch" -eq "$_channel" ]; then
-			if [ -z "$_op_class" ]; then
-				halow_bw=$bw
-				center_freq=$freq
-				# If you didn't pass op_class, set it from this data.
-				op_class="$g_op"
-				IFS=$oIFS
-				return 0;
-			elif [ "$l_op" -eq "$_op_class" ] || [ "$g_op" -eq "$_op_class" ]; then
-				halow_bw=$bw
-				center_freq=$freq
-				IFS=$oIFS
-				return 0;
-			fi
-		fi
-	done < /usr/share/morse-regdb/channels.csv
-
-	IFS=$oIFS
-	return 1;
-}
-
-
-morse_find_ifname()
-{
-	for file in "/sys/class/net/wlan"*;
-	do
-		if [ -d "$file"/device/morse ]
-		then
-			ifname=$(basename $file)
-			break
-		fi
-	done
-}
-
-# this function checks if an macaddr is burnt into the device.
-# if so, returns it, otherwise returns an empty string
-morse_get_chip_macaddr()
-{
-	ifname=
-	morse_find_ifname
-	local state=$(cat /sys/class/net/${ifname}/operstate 2>/dev/null)
-	[ $? -ne 0 ] && return
-
-	if [ "$state" == "down" ]; then
-		ip link set ${ifname} up
-		[ $? -ne 0 ] && return
-	fi
-
-	local chip_macaddr="$(morse_cli -i ${ifname} macaddr 2>/dev/null)"
-	[ $? -ne 0 ] && printf ""
-	chip_macaddr=${chip_macaddr##"Chip MAC address: "}
-
-	#make sure (using regex) that the we got a macaddr
-	if [[ "$chip_macaddr" =~ ^\([0-9A-Fa-f]{2}[:]\){5}\([0-9A-Fa-f]{2}\)$ ]]; then
-		[ "$chip_macaddr" = "00:00:00:00:00:00" ] && printf "" || printf "$chip_macaddr"
-	else
-		printf ""
-	fi
-
-	if [ "$state" == "down" ]; then
-		ip link set ${ifname} down
-	fi
-}
-
-update_dpp_qrcode()
-{
-	local uci_changes_path="$(mktemp -d)"
-	local private_key_path=$1
-	#remove ':' from the macaddress
-	local mac_address=$(echo "$2" | sed -r 's/://g')
-	#generate the public key string from the private key.
-	#unfortunately, there is no way to quiet the 'read EC key' messages without redirecting stderr.
-	local pubkey=$(openssl ec -in $private_key_path -pubout -conv_form compressed -outform DER 2> /dev/null | hexdump -e '16/1 "%02x " "\n"' | xxd -r -p | base64 -w0)
-	#save qrcode string into /www
-	qrencode --inline --8bit --type=SVG --output=/tmp/dpp_qrcode.svg "DPP:V:2;M:$mac_address;K:$pubkey;;"
-	#only write if necessary
-	if ! cmp -s /tmp/dpp_qrcode.svg /www/dpp_qrcode.svg; then
-		cp /tmp/dpp_qrcode.svg /www/dpp_qrcode.svg
-	fi
-	rm /tmp/dpp_qrcode.svg
-}

feeds/morse/netifd-morse/lib/netifd/morse/wpa_s1g_dpp_action.sh

@@ -1,111 +0,0 @@
-#!/bin/sh
-
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-. /lib/netifd/netifd-wireless.sh
-. /etc/diag.sh
-
-#returns 0 if config is complete
-is_config_complete()
-{
-    [ -z "$encryption" ] && return 1
-
-    #if encryption is sae, check if we have psk
-    if [ "$encryption" = "sae" ]; then
-        [ -z "$psk" ] && return 1
-    fi
-
-    #check if we have ssid
-    [ -z "$ssid" ] && return 1
-
-    return 0
-}
-
-get_uci_section()
-{
-    local target_iface=$1
-    local dpp_wifi_iface=
-
-    check_interface() {
-        json_get_vars section ifname
-        [ "$ifname" = "$target_iface" ] && [ -n "$section" ] && [ -z "$dpp_wifi_iface" ] && dpp_wifi_iface=$section
-    }
-
-    wireless_status=$(ubus call network.wireless status)
-
-    json_init
-    json_load "$wireless_status"
-    json_get_keys radios
-
-    for radio in $radios; do
-        json_select $radio
-        for_each_interface "sta" check_interface
-        json_select ..
-    done
-    echo "$dpp_wifi_iface"
-}
-
-save_and_reload()
-{
-    logger "Saving Received AP Credentials."
-    local uci_section=$(get_uci_section $iface_name)
-    if [ -z "$uci_section" ]; then
-        logger "FATAL: unable to find the correct wifi interface in configs."
-        exit 0
-    fi
-
-    uci set wireless.$uci_section.encryption="$encryption"
-
-    #if encryption is sae, check if we have psk
-    if [ "$encryption" = "sae" ]; then
-        uci set wireless.$uci_section.key="$psk"
-    fi
-
-    uci set wireless.$uci_section.ssid="$ssid"
-
-    uci set wireless.$uci_section.dpp='0'
-
-    uci commit
-    ubus call service event "{ \"type\": \"config.change\", \"data\": { \"package\": \"wireless\" }}"
-}
-
-# Do not name 'config'; will clash with uci functions.
-do_config() {
-    # convert password from hex string to string.
-    psk="$(echo "$psk" | xxd -r -p)"
-
-    # if the file contains all the necessary stuff, then save and reload.
-    is_config_complete && save_and_reload
-}
-
-failed() {
-    set_state dpp_failed
-}
-
-finished() {
-    set_state done
-}
-
-started() {
-    set_state dpp_started
-}
-
-case "$1" in
-    config)
-        do_config
-    ;;
-    failed)
-        failed
-    ;;
-    finished)
-        finished
-    ;;
-    started)
-        started
-    ;;
-    *)
-        echo "Usage: $0 {config|failed|finished|started}"
-        exit 1
-    ;;
-esac

feeds/morse/netifd-morse/lib/wifi/morse.sh

@@ -1,139 +0,0 @@
-#!/bin/sh
-
-# This script is copied and modified from
-# package/kernel/mac80211/files/lib/wifi/mac80211.sh
-# and modified (simplified) to work with morse devices.
-
-append DRIVERS "morse"
-
-# Find and set $phy for this $device (a wifi-device section name)
-lookup_phy() {
-	[ -n "$phy" ] && {
-		[ -d /sys/class/ieee80211/$phy ] && return
-	}
-
-	local devpath
-	config_get devpath "$device" path
-	[ -n "$devpath" ] && {
-		phy="$(iwinfo dot11ah phyname "path=$devpath")"
-		[ -n "$phy" ] && return
-	}
-
-	local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
-	[ -n "$macaddr" ] && {
-		for _phy in /sys/class/ieee80211/*; do
-			[ -e "$_phy" ] || continue
-
-			[ "$macaddr" = "$(cat ${_phy}/macaddress)" ] || continue
-			phy="${_phy##*/}"
-			return
-		done
-	}
-	phy=
-	return
-}
-
-# Find and save the phy and macaddr for this $device (a wifi-device section name)
-find_morse_phy() {
-	local device="$1"
-
-	config_get phy "$device" phy
-	lookup_phy
-	[ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
-		echo "PHY for wifi device $1 not found"
-		return 1
-	}
-	config_set "$device" phy "$phy"
-
-	config_get macaddr "$device" macaddr
-	[ -z "$macaddr" ] && {
-		config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
-	}
-
-	return 0
-}
-
-# Set found=1 if the $phy for this $device (a wifi-device section name) is the same as $dev
-check_morse_device() {
-	config_get phy "$1" phy
-	[ -z "$phy" ] && {
-		find_morse_phy "$1" >/dev/null || return 0
-		config_get phy "$1" phy
-	}
-	[ "$phy" = "$dev" ] && found=1
-}
-
-detect_morse() {
-	devidx=0
-	config_load wireless
-	while :; do
-		config_get type "radio$devidx" type
-		[ -n "$type" ] || break
-		devidx=$(($devidx + 1))
-	done
-
-	for _dev in /sys/class/ieee80211/*; do
-		[ -e "$_dev" ] || continue
-
-		# Only configure morse devices.
-		basename "$(readlink -f "$_dev/device/driver/")" | grep '^morse_' || continue
-
-		dev="${_dev##*/}"
-
-		# Skip already configured devices.
-		# The path or macaddr are used to find the corresponding phy.
-		found=0
-		config_foreach check_morse_device wifi-device
-		[ "$found" -gt 0 ] && continue
-
-		path="$(iwinfo dot11ah path "$dev")"
-		if [ -n "$path" ]; then
-			dev_id="set wireless.radio${devidx}.path='$path'"
-		else
-			dev_id="set wireless.radio${devidx}.macaddr=$(cat /sys/class/ieee80211/${dev}/macaddress)"
-		fi
-
-		uci -q batch <<-EOF
-			set wireless.radio${devidx}=wifi-device
-			set wireless.radio${devidx}.type=morse
-			${dev_id}
-			set wireless.radio${devidx}.band=s1g
-			set wireless.radio${devidx}.hwmode=11ah
-			set wireless.radio${devidx}.reconf=0
-			set wireless.radio${devidx}.disabled=1
-
-			set wireless.default_radio${devidx}=wifi-iface
-			set wireless.default_radio${devidx}.mode=ap
-			set wireless.default_radio${devidx}.wds=1
-			set wireless.default_radio${devidx}.device=radio${devidx}
-			set wireless.default_radio${devidx}.network=lan
-			set wireless.default_radio${devidx}.ssid=MorseMicro
-			set wireless.default_radio${devidx}.encryption=sae
-			set wireless.default_radio${devidx}.key=12345678
-EOF
-
-		board=$(board_name)
-
-		case "$board" in
-			morse,ekh01-03 |\
-			morse,ekh03v3)
-				bcf=bcf_mf08551.bin
-			;;
-			morse,ekh01v1)
-				bcf=bcf_mf03120.bin
-			;;
-			morse,ekh01v2)
-				bcf=bcf_mf08251.bin
-			;;
-			morse,ekh04v4)
-				bcf=bcf_ekh04_v4.bin
-			;;
-		esac
-
-		[ -n "${bcf}" ] && uci -q set wireless.radio${devidx}.bcf="${bcf}"
-
-		uci -q commit wireless
-
-		devidx=$(($devidx + 1))
-	done
-}

feeds/morse/utils/hostapd_s1g/Config.in

@@ -1,17 +0,0 @@
-if PACKAGE_hostapd_s1g
-
-	config MORSE_HOSTAPD_S1G_EAP
-		bool
-		default n
-		prompt "Enable Extensible Authentication Protocol (EAP) support"
-
-	config MORSE_HOSTAPD_S1G_ACS
-		bool
-		default n
-		prompt "Enable automatic channel selection (ACS) support"
-		help
-			This will allow hostapd to pick the channel automatically when channel is set
-			to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
-			similar way.
-
-endif

feeds/morse/utils/hostapd_s1g/Makefile

@@ -1,167 +0,0 @@
-#
-# Copyright 2022 Morse Micro
-#
-# This is free software, licensed under the 3-Clause BSD License.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hostapd_s1g
-PKG_RELEASE=2
-
-PKG_VERSION:=1.12.4
-
-PKG_LICENSE:=BSD-3-Clause
-
-PKG_SOURCE_VERSION:=$(PKG_VERSION)
-PKG_SOURCE_URL:=https://github.com/MorseMicro/hostap.git
-PKG_HASH:=a2f17ce3d2fe25d45cc2d6869e9ea644bcac441ec9b541972034768d4fc63608
-PKG_SOURCE_PROTO:=git
-
-PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
-PKG_BUILD_PARALLEL:=1
-
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_PACKAGE_kmod-morse \
-	CONFIG_PACKAGE_kmod-cfg80211 \
-	CONFIG_PACKAGE_hostapd \
-	CONFIG_PACKAGE_hostapd-basic \
-	CONFIG_PACKAGE_hostapd-mini \
-	CONFIG_WPA_RFKILL_SUPPORT \
-	CONFIG_DRIVER_WEXT_SUPPORT \
-	CONFIG_DRIVER_11N_SUPPORT \
-	CONFIG_DRIVER_11AC_SUPPORT \
-	CONFIG_DRIVER_11AX_SUPPORT \
-	CONFIG_WPA_ENABLE_WEP
-
-include $(INCLUDE_DIR)/package.mk
-
-MAKE_FLAGS += \
-	MORSEHOSTAPD_VERSION_STRING=$(PKG_VERSION)
-
-MMHOSTAPD_CONFIG_ENABLE = \
-	CONFIG_INTERNAL_LIBTOMMATH \
-	CONFIG_DEBUG_FILE \
-	CONFIG_DEBUG_SYSLOG \
-	CONFIG_PMKSA_CACHE_EXTERNAL \
-	CONFIG_SAE \
-	CONFIG_TESTING_OPTIONS \
-	CONFIG_WNM \
-	CONFIG_DRIVER_ACS \
-	CONFIG_DRIVER_HOSTAP \
-	CONFIG_DRIVER_NL80211 \
-	CONFIG_HS20 \
-	CONFIG_IEEE80211AC \
-	CONFIG_IEEE80211N \
-	CONFIG_IEEE80211AH \
-	CONFIG_IEEE80211R \
-	CONFIG_INTERWORKING \
-	CONFIG_FULL_DYNAMIC_VLAN \
-	CONFIG_VLAN_NETLINK \
-	CONFIG_OWE \
-	CONFIG_LIBNL32 \
-	CONFIG_DPP \
-	CONFIG_DPP2 \
-	CONFIG_WPS
-
-MMHOSTAPD_CONFIG_SET = \
-	NEED_LINUX_IOCTL \
-	CONFIG_DPP \
-	CONFIG_SAE
-
-MMHOSTAPD_CONFIG_DISABLE = \
-    CONFIG_DRIVER_NONE \
-	CONFIG_DRIVER_RTW \
-	CONFIG_DRIVER_WIRED
-
-MMHOSTAPD_CONFIG_EDITS += 's/\#\(CONFIG_TLS=openssl\)/\1/'
-
-ifeq ($(CONFIG_MORSE_HOSTAPD_S1G_ACS),y)
-	MMHOSTAPD_CONFIG_ENABLE += CONFIG_ACS
-endif
-
-ifeq ($(CONFIG_MORSE_HOSTAPD_S1G_EAP),y)
-	MMHOSTAPD_CONFIG_ENABLE += \
-		CONFIG_EAP \
-		CONFIG_RADIUS_SERVER \
-		CONFIG_TLSV1
-else
-	MMHOSTAPD_CONFIG_DISABLE += CONFIG_HOSTAPD_EAP
-	MMHOSTAPD_CONFIG_ENABLE += \
-		CONFIG_NO_ACCOUNTING \
-		CONFIG_NO_RADIUS
-endif
-
-define Package/hostapd_s1g
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=WirelessAPD
-  TITLE:=Morse Micro HaLow hostapd
-  DEPENDS:= +kmod-morse +libnl +libopenssl +libubus
-  USERID:=network=101:network=101
-  PROVIDES:=hostapd_s1g
-endef
-
-define Package/hostapd_s1g/description
- This package contains a full featured Morse Micro patched
- Authenticator.
-endef
-
-define Package/hostapd_s1g/config
-    source "$(SOURCE)/Config.in"
-endef
-
-MMHOSTAPD_CONFIG = $(PKG_BUILD_DIR)/hostapd/.config
-
-define Build/Prepare
-    $(call Build/Prepare/Default)
-	$(CP) $(PKG_BUILD_DIR)/hostapd/defconfig $(MMHOSTAPD_CONFIG)
-	sed -i $(patsubst %,-e 's/^#\(%\)/\1/',$(MMHOSTAPD_CONFIG_ENABLE)) \
-		$(patsubst %,-e 's/^\(%\)/#\1/',$(MMHOSTAPD_CONFIG_DISABLE)) \
-		$(patsubst %,-e '1i%=y',$(MMHOSTAPD_CONFIG_SET)) \
-		$(patsubst %,-e %,$(MMHOSTAPD_CONFIG_EDITS)) \
-		$(MMHOSTAPD_CONFIG)
-endef
-
-TARGET_CPPFLAGS := \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(PKG_BUILD_DIR)/src/crypto \
-	$(TARGET_CPPFLAGS) \
-	-DCONFIG_LIBNL20 \
-	-D_GNU_SOURCE
-
-TARGET_LDFLAGS += -lnl-3 -lnl-genl-3 -lnl-route-3
-TARGET_LDFLAGS += -lm -lpthread -lcrypto -lssl
-
-TARGET_LDFLAGS += -lrt
-TARGET_LDFLAGS_C += -lrt
-
-define Build/RunMake
-	CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
-	$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
-		$(TARGET_CONFIGURE_OPTS) \
-		$(DRIVER_MAKEOPTS) \
-		LIBS="$(TARGET_LDFLAGS)" \
-		LIBS_c="$(TARGET_LDFLAGS_C)" \
-		AR="$(TARGET_CROSS)gcc-ar" \
-		BCHECK= \
-		$(2)
-endef
-
-define Build/Compile
-	+$(call Build/RunMake,hostapd, \
-		hostapd_s1g hostapd_cli_s1g \
-	)
-endef
-
-#Ian
-define Package/hostapd_s1g/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_s1g $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli_s1g $(1)/sbin
-	$(INSTALL_DIR) $(1)/lib/netifd
-	$(INSTALL_DATA) ./files/lib/netifd/hostapd_s1g.sh $(1)/lib/netifd 
-endef
-
-$(eval $(call BuildPackage,hostapd_s1g))

feeds/morse/utils/hostapd_s1g/patches/0001-APP-2573-Emit-a-DPP-PB_STATUS-event-when-push-button.patch

@@ -1,45 +0,0 @@
-From 5433351ed5ab62c2d4fbd15a2c4d8c4aeacb93dc Mon Sep 17 00:00:00 2001
-From: Evan Benn <evan.benn@morsemicro.com>
-Date: Thu, 29 Feb 2024 11:09:38 +1100
-Subject: [PATCH] APP-2573: Emit a DPP PB_STATUS event when push button starts
-
----
- src/ap/dpp_hostapd.c            | 1 +
- wpa_supplicant/dpp_supplicant.c | 2 ++
- 2 files changed, 3 insertions(+)
-
-diff --git a/src/ap/dpp_hostapd.c b/src/ap/dpp_hostapd.c
-index b7cca47c714b..3025eef204d2 100644
---- a/src/ap/dpp_hostapd.c
-+++ b/src/ap/dpp_hostapd.c
-@@ -3960,6 +3960,7 @@ int hostapd_dpp_push_button(struct hostapd_data *hapd, const char *cmd)
- 	eloop_register_timeout(100, 0, hostapd_dpp_push_button_expire,
- 			       hapd, NULL);
- 
-+	wpa_msg(hapd->msg_ctx, MSG_INFO, DPP_EVENT_PB_STATUS "started");
- 	return 0;
- }
- 
-diff --git a/wpa_supplicant/dpp_supplicant.c b/wpa_supplicant/dpp_supplicant.c
-index ab06ff8d32c1..24e4bb3c444d 100644
---- a/wpa_supplicant/dpp_supplicant.c
-+++ b/wpa_supplicant/dpp_supplicant.c
-@@ -5676,6 +5676,7 @@ static int wpas_dpp_push_button_configurator(struct wpa_supplicant *wpa_s,
- 	eloop_register_timeout(100, 0, wpas_dpp_push_button_expire,
- 			       wpa_s, NULL);
- 
-+	wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_PB_STATUS "started");
- 	return 0;
- }
- 
-@@ -5749,6 +5750,7 @@ int wpas_dpp_push_button(struct wpa_supplicant *wpa_s, const char *cmd)
- 	wpa_supplicant_req_scan(wpa_s, 0, 0);
- 
- 	res = 0;
-+	wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_PB_STATUS "started");
- out:
- 
- 	/* If push button mode failed to start, restart the chirp forever timer */
--- 
-2.42.0.530.g692be87cbba5
-

feeds/morse/utils/hostapd_s1g/patches/0002-SW-11943-dpp-does-not-associate-in-us-regd.patch

@@ -1,90 +0,0 @@
-From 25631fa387af430b8d7f03302218c66dc161cc6f Mon Sep 17 00:00:00 2001
-From: Andrew Pope <andrew.pope@morsemicro.com>
-Date: Tue, 4 Jun 2024 23:12:37 +0000
-Subject: [PATCH] Merged in SW-11943-dpp-does-not-associate-in-us-regdom (pull
- request #213)
-
-SW-11943: DPP does not associate in US regdom
-
-Two problems contributed to the originally reported issue:
-
-1. The DPP-PB state machine function will unconditionally cancel any pending off-channel actions - even if the DPP PB discovery phase is over. To fix this, avoid unconditionally completing offchannel actions from DPP-PB state machine function if DPP PB discovery phase is over.
-
-2. Logic around PKEX retries will manually attempt to complete the exchange on adjacent non-S1G channels. These retries inevitably fail, leading to a quicker collapse of the PKEX exchange attempts and eventual downgrade from v2 to v1 (bad). To fix this, remove non-S1G frequency hopping logic from DPP PB discovery and PKEX exchange phases.
-
-Approved-by: Neville Young
-Approved-by: Simon Wadsworth
-Approved-by: Ayman Grais
-Approved-by: James Herbert
----
- src/ap/dpp_hostapd.c            |  6 ++++++
- wpa_supplicant/dpp_supplicant.c | 17 +++++++++++++++--
- 2 files changed, 21 insertions(+), 2 deletions(-)
-
-diff --git a/src/ap/dpp_hostapd.c b/src/ap/dpp_hostapd.c
-index b7cca47c7..282581fe5 100644
---- a/src/ap/dpp_hostapd.c
-+++ b/src/ap/dpp_hostapd.c
-@@ -260,6 +260,12 @@ static int hostapd_dpp_allow_ir(struct hostapd_data *hapd, unsigned int freq)
- static int hostapd_dpp_pkex_next_channel(struct hostapd_data *hapd,
- 					 struct dpp_pkex *pkex)
- {
-+	/* Following logic is not S1G compatible. Attempting PKEX on non-adjacent S1G channels
-+	 * results in guaranteed failure.
-+	 */
-+	if (hapd->iconf->ieee80211ah)
-+		return -1;
-+
- 	if (pkex->freq == 2437)
- 		pkex->freq = 5745;
- 	else if (pkex->freq == 5745)
-diff --git a/wpa_supplicant/dpp_supplicant.c b/wpa_supplicant/dpp_supplicant.c
-index ab06ff8d3..e90e4a163 100644
---- a/wpa_supplicant/dpp_supplicant.c
-+++ b/wpa_supplicant/dpp_supplicant.c
-@@ -2840,6 +2840,12 @@ static int wpas_dpp_allow_ir(struct wpa_supplicant *wpa_s, unsigned int freq)
- static int wpas_dpp_pkex_next_channel(struct wpa_supplicant *wpa_s,
- 				      struct dpp_pkex *pkex)
- {
-+#if defined(CONFIG_IEEE80211AH)
-+	/* Following logic is not S1G compatible. Attempting PKEX on non-adjacent S1G channels
-+	 * results in guaranteed failure.
-+	 */
-+	return -1;
-+#endif
- 	if (pkex->freq == 2437)
- 		pkex->freq = 5745;
- 	else if (pkex->freq == 5745)
-@@ -5113,10 +5119,16 @@ static int * wpas_dpp_presence_ann_channels(struct wpa_supplicant *wpa_s,
- 
- 			if (chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_RADAR))
- 				continue;
-+#if defined(CONFIG_IEEE80211AH)
-+			/* Adding channels 44 and 149 at end of scan list is not required
-+			 * for HaLow
-+			 */
-+#else
- 			if (chan->freq == 5220)
- 				chan44 = 1;
- 			if (chan->freq == 5745)
- 				chan149 = 1;
-+#endif
- 
- 			/* Morse - All 5GHz channels that are mapped to 1 MHz and 2 MHz.
- 			 * Channels that aren't relevant to a regulatory domain will be
-@@ -5573,9 +5585,10 @@ static void wpas_dpp_pb_next(void *eloop_ctx, void *timeout_ctx)
- 	if (!wpa_s->dpp_pb_freqs)
- 		return;
- 
--	os_get_reltime(&now);
--	offchannel_send_action_done(wpa_s);
-+	if (!wpa_s->dpp_pb_discovery_done)
-+		offchannel_send_action_done(wpa_s);
- 
-+	os_get_reltime(&now);
- 	if (os_reltime_expired(&now, &wpa_s->dpp_pb_time, 100)) {
- 		wpa_printf(MSG_DEBUG, "DPP: Push button wait time expired");
- 		wpas_dpp_push_button_stop(wpa_s);
--- 
-2.25.1
-