enable usb-storage of EAP101

Signed-off-by: John Crispin <john@phrozen.org>

Makefile

@@ -3,6 +3,9 @@
 all:
 	./dock-run.sh ./build.sh  $(TARGET)
 
+dock-env:
+	./dock-run.sh bash 
+
 opensync:
 	./dock-run.sh make -j$(nproc) V=s -C openwrt package/feeds/opensync/opensync/clean
 	./dock-run.sh make -j$(nproc) V=s -C openwrt package/feeds/opensync/opensync/compile TARGET=$(TARGET) OPENSYNC_SRC=$(shell pwd)

build.sh

@@ -45,6 +45,10 @@ EAP102)
 	TARGET=eap102
 	WIFI=wifi-ax
 	;;
+EAP106)
+	TARGET=eap106
+	WIFI=wifi-ax
+	;;
 EX227)
 	TARGET=ex227
 	WIFI=wifi-ax
@@ -61,6 +65,14 @@ WF194C)
 	TARGET=wf194c
 	WIFI=wifi-ax
 	;;
+HAWKEYE)
+	TARGET=hawkeye
+	WIFI=wifi-ax
+	;;
+WALLABY)
+	TARGET=wallaby
+	WIFI=wifi-ax
+	;;
 WF610D)
 	TARGET=wf610d
 	;;

dock-run.sh

@@ -6,4 +6,4 @@ params="-v ${PWD}:${PWD} --rm -w ${PWD} -u"$(id -u):$(id -g)" $groups -v/etc/pas
 
 docker build --tag=${tag} docker
 
-docker run $params $@
+docker run -it $params $@

docker/Dockerfile

@@ -11,3 +11,4 @@ RUN apt-get update \
 RUN git config --global user.email "you@example.com"
 RUN git config --global user.name "Your Name"
 RUN pip3 install kconfiglib
+RUN apt-get install -y libncursesw5

feeds/ipq807x/qca-ssdk/patches/101-aq-111c.patch

@@ -0,0 +1,24 @@
+Index: qca-ssdk/include/hsl/phy/hsl_phy.h
+===================================================================
+--- qca-ssdk.orig/include/hsl/phy/hsl_phy.h
++++ qca-ssdk/include/hsl/phy/hsl_phy.h
+@@ -577,6 +577,7 @@ typedef struct {
+ #define AQUANTIA_PHY_109        0x03a1b502
+ #define AQUANTIA_PHY_111        0x03a1b610
+ #define AQUANTIA_PHY_111B0      0x03a1b612
++#define AQUANTIA_PHY_111C       0x03a1b7e2
+ #define AQUANTIA_PHY_112        0x03a1b660
+ #define AQUANTIA_PHY_113C_A0    0x31c31C10
+ #define AQUANTIA_PHY_113C_A1    0x31c31C11
+Index: qca-ssdk/src/hsl/phy/hsl_phy.c
+===================================================================
+--- qca-ssdk.orig/src/hsl/phy/hsl_phy.c
++++ qca-ssdk/src/hsl/phy/hsl_phy.c
+@@ -233,6 +233,7 @@ phy_type_t hsl_phytype_get_by_phyid(a_ui
+ 		case AQUANTIA_PHY_111:
+ 		case AQUANTIA_PHY_114C:
+ 		case AQUANTIA_PHY_111B0:
++		case AQUANTIA_PHY_111C:
+ 		case AQUANTIA_PHY_112:
+ 		case AQUANTIA_PHY_113C_A0:
+ 		case AQUANTIA_PHY_113C_A1:

feeds/wifi-ax/ath11k-wifi/Makefile

@@ -30,6 +30,7 @@ ALLWIFIBOARDS:= \
 	edgecore-eap101 \
 	sercomm-wallaby \
 	edgecore-eap102 \
+	edgecore-eap106 \
 	tplink-ex227 \
 	tplink-ex447
 
@@ -112,6 +113,7 @@ $(eval $(call generate-ath11k-wifi-package,cig-wf194c,Cigtech WF194c))
 $(eval $(call generate-ath11k-wifi-package,sercomm-wallaby,Sercomm Kiwi))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap101,EdgeCore EAP101))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
+$(eval $(call generate-ath11k-wifi-package,edgecore-eap106,Edgecore EAP106))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 

feeds/wlan-ap/opensync/files/etc/logrotate.d/ovsdb.conf

@@ -1,10 +1,10 @@
-/tmp/log/openvswitch/* {
+/tmp/log/openvswitch/*.log {
     daily
     rotate 5
     size 1M
     compress
     delaycompress
     dateext
-    dateformat -%d%m%Y
+    dateformat -%s
     notifempty
 }

feeds/wlan-ap/opensync/files/usr/opensync/certs/ca.pem

@@ -0,0 +1,75 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

patches/0054-ipq807x-add-edgecore-eap106-support.patch

@@ -0,0 +1,872 @@
+From 6c4680359a5e164570e5d8e0b75c4dafbb1abccd Mon Sep 17 00:00:00 2001
+From: "peter.chiu" <peter.chiu@4ipnet.com>
+Date: Thu, 24 Jun 2021 17:16:48 +0800
+Subject: [PATCH] ipq807x: add edgecore eap106 support
+
+---
+ .../linux/ipq807x/base-files/etc/board.d/01_leds   |   4 +
+ .../ipq807x/base-files/etc/board.d/02_network      |   1 +
+ .../etc/hotplug.d/firmware/10-ath11k-caldata       |   2 +
+ target/linux/ipq807x/base-files/etc/init.d/aq_phy  |   1 +
+ target/linux/ipq807x/image/ipq807x.mk              |  10 +
+ target/linux/ipq807x/patches/111-eap106.patch      | 765 +++++++++++++++++++++
+ 6 files changed, 783 insertions(+)
+ mode change 100644 => 100755 target/linux/ipq807x/image/ipq807x.mk
+ create mode 100644 target/linux/ipq807x/patches/111-eap106.patch
+
+diff --git a/target/linux/ipq807x/base-files/etc/board.d/01_leds b/target/linux/ipq807x/base-files/etc/board.d/01_leds
+index 1402a74..7225667 100755
+--- a/target/linux/ipq807x/base-files/etc/board.d/01_leds
++++ b/target/linux/ipq807x/base-files/etc/board.d/01_leds
+@@ -20,6 +20,10 @@ edgecore,eap102)
+         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tx"
+         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tx"
+ 	;;
++edgecore,eap106)
++	ucidef_set_led_netdev "wan" "WAN" "led1_yellow" "br-wan" "tx rx link"
++	ucidef_set_led_netdev "lan" "LAN" "led2_amber" "br-lan" "tx rx link"
++	;;
+ esac
+ 
+ board_config_flush
+diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network
+index e90a73f..72ba9e0 100755
+--- a/target/linux/ipq807x/base-files/etc/board.d/02_network
++++ b/target/linux/ipq807x/base-files/etc/board.d/02_network
+@@ -29,6 +29,7 @@ qcom_setup_interfaces()
+                 ;;
+ 	cig,wf194c|\
+ 	edgecore,eap102|\
++	edgecore,eap106|\
+ 	sercomm,wallaby)
+ 		ucidef_set_interface_lan "eth0"
+ 		ucidef_set_interface_wan "eth1"
+diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
+index 25b2288..2c35c06 100755
+--- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
++++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata
+@@ -49,6 +49,7 @@ case "$FIRMWARE" in
+ 	case "$board" in
+ 	cig,wf194c|\
+ 	edgecore,eap102 |\
++	edgecore,eap106 |\
+ 	qcom,ipq807x-hk01|\
+ 	qcom,ipq807x-hk14|\
+ 	tplink,ex227|\
+@@ -85,6 +86,7 @@ ath11k/qcn9000/hw1.0/caldata_2.bin)
+ ath11k-macs)
+ 	case "$board" in
+ 	edgecore,eap102|\
++	edgecore,eap106|\
+ 	cig,wf188n)
+ 		ath11k_generate_macs
+ 		;;
+diff --git a/target/linux/ipq807x/base-files/etc/init.d/aq_phy b/target/linux/ipq807x/base-files/etc/init.d/aq_phy
+index 41a52cc..5ff174d 100755
+--- a/target/linux/ipq807x/base-files/etc/init.d/aq_phy
++++ b/target/linux/ipq807x/base-files/etc/init.d/aq_phy
+@@ -6,6 +6,7 @@ boot() {
+ 	. /lib/functions.sh
+ 
+ 	case "$(board_name)" in
++	edgecore,eap106|\
+ 	cig,wf194c)
+ 		aq-fw-download /lib/firmware/AQR-G4_v5.4.B-AQR_CIG_WIFI_ID44715_VER1673.cld miireg 0 > /dev/null
+ 		sleep 1
+diff --git a/target/linux/ipq807x/image/ipq807x.mk b/target/linux/ipq807x/image/ipq807x.mk
+old mode 100644
+new mode 100755
+index 000d279..55c344b
+--- a/target/linux/ipq807x/image/ipq807x.mk
++++ b/target/linux/ipq807x/image/ipq807x.mk
+@@ -44,6 +44,16 @@ define Device/edgecore_eap102
+   DEVICE_PACKAGES := ath11k-wifi-edgecore-eap102 kmod-usb2 uboot-envtools
+ endef
+ TARGET_DEVICES += edgecore_eap102
++
++define Device/edgecore_eap106
++  DEVICE_TITLE := Edgecore EAP106
++  DEVICE_DTS := qcom-ipq807x-eap106
++  DEVICE_DTS_CONFIG=config@hk02
++  SUPPORTED_DEVICES := edgecore,eap106
++  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap106 aq-fw-download uboot-envtools kmod-usb3 kmod-usb2
++endef
++TARGET_DEVICES += edgecore_eap106
++
+ define Device/tplink_ex227
+   DEVICE_TITLE := TP-Link EX227
+   DEVICE_DTS := qcom-ipq807x-ex227
+diff --git a/target/linux/ipq807x/patches/111-eap106.patch b/target/linux/ipq807x/patches/111-eap106.patch
+new file mode 100644
+index 0000000..632a688
+--- /dev/null
++++ b/target/linux/ipq807x/patches/111-eap106.patch
+@@ -0,0 +1,765 @@
++Index: linux-4.4.60-qsdk-10fd7d14853b7020b804acae690c8acec5d954ce/arch/arm64/boot/dts/qcom/qcom-ipq807x-eap106.dts
++===================================================================
++--- /dev/null
+++++ linux-4.4.60-qsdk-10fd7d14853b7020b804acae690c8acec5d954ce/arch/arm64/boot/dts/qcom/qcom-ipq807x-eap106.dts
++@@ -0,0 +1,716 @@
+++/dts-v1/;
+++/*
+++ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+++ *
+++ * Permission to use, copy, modify, and/or distribute this software for any
+++ * purpose with or without fee is hereby granted, provided that the above
+++ * copyright notice and this permission notice appear in all copies.
+++ *
+++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+++ */
+++#include "qcom-ipq807x-soc.dtsi"
+++#include "qcom-ipq807x-hk-cpu.dtsi"
+++
+++/ {
+++	#address-cells = <0x2>;
+++	#size-cells = <0x2>;
+++	model = "Qualcomm Technologies, Inc. IPQ807x/AP-HK02";
+++	compatible = "qcom,ipq807x-hk02", "qcom,ipq807x";
+++	qcom,msm-id = <0x143 0x0>;
+++	interrupt-parent = <&intc>;
+++	qcom,board-id = <0x8 0x0>;
+++	qcom,pmic-id = <0x0 0x0 0x0 0x0>;
+++
+++	aliases {
+++		/*
+++		 * Aliases as required by u-boot
+++		 * to patch MAC addresses
+++		 */
+++		ethernet0 = "/soc/dp1";
+++		ethernet1 = "/soc/dp2";
+++	};
+++	chosen {
+++		bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init";
+++		#ifdef __IPQ_MEM_PROFILE_256_MB__
+++			bootargs-append = " swiotlb=1";
+++		#else
+++			bootargs-append = " swiotlb=1 coherent_pool=2M";
+++		#endif
+++	};
+++};
+++
+++&tlmm {
+++	leds_pins: leds_pinmux {
+++
+++		led1_yellow {
+++			pins = "gpio25";
+++			function = "gpio";
+++			drive-strength = <8>;
+++			bias-pull-down;
+++		};
+++		led1_green {
+++			pins = "gpio28";
+++			function = "gpio";
+++			drive-strength = <8>;
+++			bias-pull-down;
+++		};
+++		led2_amber {
+++			pins = "gpio29";
+++			function = "gpio";
+++			drive-strength = <8>;
+++			bias-pull-down;
+++		};
+++		led2_blue {
+++			pins = "gpio32";
+++			function = "gpio";
+++			drive-strength = <8>;
+++			bias-pull-down;
+++		};
+++	};
+++
+++	mdio_pins: mdio_pinmux {
+++		mux_0 {
+++			pins = "gpio68";
+++			function = "mdc";
+++			drive-strength = <8>;
+++			bias-pull-up;
+++		};
+++		mux_1 {
+++			pins = "gpio69";
+++			function = "mdio";
+++			drive-strength = <8>;
+++			bias-pull-up;
+++		};
+++	};
+++
+++	uart_pins: uart_pins {
+++		mux {
+++			pins = "gpio23", "gpio24";
+++			function = "blsp4_uart1";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++	};
+++
+++	i2c_0_pins: i2c_0_pinmux {
+++		mux {
+++			pins = "gpio42", "gpio43";
+++			function = "blsp1_i2c";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++	};
+++
+++	spi_0_pins: spi_0_pins {
+++		mux {
+++			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+++			function = "blsp0_spi";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++	};
+++
+++	qpic_pins: qpic_pins {
+++		data_0 {
+++			pins = "gpio15";
+++			function = "qpic_pad0";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_1 {
+++			pins = "gpio12";
+++			function = "qpic_pad1";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_2 {
+++			pins = "gpio13";
+++			function = "qpic_pad2";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_3 {
+++			pins = "gpio14";
+++			function = "qpic_pad3";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_4 {
+++			pins = "gpio5";
+++			function = "qpic_pad4";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_5 {
+++			pins = "gpio6";
+++			function = "qpic_pad5";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_6 {
+++			pins = "gpio7";
+++			function = "qpic_pad6";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_7 {
+++			pins = "gpio8";
+++			function = "qpic_pad7";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		data_8 {
+++			pins = "gpio16";
+++			function = "qpic_pad8";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++		qpic_pad {
+++			pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4",
+++			       "gpio9", "gpio10", "gpio11", "gpio17";
+++			function = "qpic_pad";
+++			drive-strength = <8>;
+++			bias-disable;
+++		};
+++	};
+++
+++	hsuart_pins: hsuart_pins {
+++		mux {
+++			pins = "gpio46", "gpio47", "gpio48", "gpio49";
+++			function = "blsp2_uart";
+++			drive-strength = <8>;
+++			bias-disable;
+++			output-low;
+++		};
+++		mux_1 {
+++			pins = "gpio51";
+++			function = "gpio";
+++			drive-strength = <8>;
+++			bias-disable;
+++			output-high;
+++		};
+++	};
+++
+++	button_pins: button_pins {
+++		wps_button {
+++			pins = "gpio57";
+++			function = "gpio";
+++			drive-strength = <8>;
+++			bias-pull-up;
+++		};
+++	};
+++
+++	uniphy_pins: uniphy_pinmux {
+++		mux {
+++			pins = "gpio60";
+++			function = "rx2";
+++			bias-disable;
+++		};
+++	};
+++	cnss_wlan_en_active: cnss_wlan_en_active {
+++		mux {
+++			pins = "gpio57";
+++			function = "gpio";
+++			drive-strength = <16>;
+++			output-high;
+++			bias-pull-up;
+++		};
+++	};
+++
+++	cnss_wlan_en_sleep: cnss_wlan_en_sleep {
+++		mux {
+++			pins = "gpio57";
+++			function = "gpio";
+++			drive-strength = <2>;
+++			output-low;
+++			bias-pull-down;
+++		};
+++	};
+++};
+++
+++&soc {
+++	gpio_keys {
+++		compatible = "gpio-keys";
+++		pinctrl-0 = <&button_pins>;
+++		pinctrl-names = "default";
+++
+++		button@1 {
+++			label = "wps";
+++			linux,code = <KEY_WPS_BUTTON>;
+++			gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+++			linux,input-type = <1>;
+++			debounce-interval = <60>;
+++		};
+++	};
+++
+++	leds {
+++		compatible = "gpio-leds";
+++		pinctrl-0 = <&leds_pins>;
+++		pinctrl-names = "default";
+++
+++		led@25 {
+++			label = "led1_yellow";
+++			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+++			linux,default-trigger = "led1_yellow";
+++			default-state = "off";
+++		};
+++
+++		led@28 {
+++			label = "led1_green";
+++			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+++			linux,default-trigger = "led1_green";
+++			default-state = "off";
+++		};
+++
+++		led@29 {
+++			label = "led2_amber";
+++			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+++			linux,default-trigger = "led2_amber";
+++			default-state = "off";
+++		};
+++
+++		led@32 {
+++			label = "led2_blue";
+++			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+++			linux,default-trigger = "led2_blue";
+++			default-state = "off";
+++		};
+++	};
+++
+++	mdio@90000 {
+++		pinctrl-0 = <&mdio_pins>;
+++		pinctrl-names = "default";
+++		phy-reset-gpio = <&tlmm 37 0>;
+++		phy0: ethernet-phy@0 {
+++			reg = <0>;
+++		};
+++		phy1: ethernet-phy@1 {
+++			reg = <1>;
+++		};
+++		phy2: ethernet-phy@2 {
+++			reg = <2>;
+++		};
+++		phy3: ethernet-phy@3 {
+++			reg = <3>;
+++		};
+++		phy4: ethernet-phy@4 {
+++			reg = <4>;
+++		};
+++		phy5: ethernet-phy@5 {
+++			compatible ="ethernet-phy-ieee802.3-c45";
+++			reg = <8>;
+++		};
+++	};
+++
+++	ess-switch@3a000000 {
+++		pinctrl-0 = <&uniphy_pins>;
+++		pinctrl-names = "default";
+++		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+++		switch_lan_bmp = <0x30>; /* lan port bitmap */
+++		switch_wan_bmp = <0x40>; /* wan port bitmap */
+++		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+++		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+++		switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
+++		bm_tick_mode = <0>; /* bm tick mode */
+++		tm_tick_mode = <0>; /* tm tick mode */
+++		port_scheduler_resource {
+++			port@0 {
+++				port_id = <0>;
+++				ucast_queue = <0 143>;
+++				mcast_queue = <256 271>;
+++				l0sp = <0 35>;
+++				l0cdrr = <0 47>;
+++				l0edrr = <0 47>;
+++				l1cdrr = <0 7>;
+++				l1edrr = <0 7>;
+++			};
+++			port@1 {
+++				port_id = <1>;
+++				ucast_queue = <144 159>;
+++				mcast_queue = <272 275>;
+++				l0sp = <36 39>;
+++				l0cdrr = <48 63>;
+++				l0edrr = <48 63>;
+++				l1cdrr = <8 11>;
+++				l1edrr = <8 11>;
+++			};
+++			port@2 {
+++				port_id = <2>;
+++				ucast_queue = <160 175>;
+++				mcast_queue = <276 279>;
+++				l0sp = <40 43>;
+++				l0cdrr = <64 79>;
+++				l0edrr = <64 79>;
+++				l1cdrr = <12 15>;
+++				l1edrr = <12 15>;
+++			};
+++			port@3 {
+++				port_id = <3>;
+++				ucast_queue = <176 191>;
+++				mcast_queue = <280 283>;
+++				l0sp = <44 47>;
+++				l0cdrr = <80 95>;
+++				l0edrr = <80 95>;
+++				l1cdrr = <16 19>;
+++				l1edrr = <16 19>;
+++			};
+++			port@4 {
+++				port_id = <4>;
+++				ucast_queue = <192 207>;
+++				mcast_queue = <284 287>;
+++				l0sp = <48 51>;
+++				l0cdrr = <96 111>;
+++				l0edrr = <96 111>;
+++				l1cdrr = <20 23>;
+++				l1edrr = <20 23>;
+++			};
+++			port@5 {
+++				port_id = <5>;
+++				ucast_queue = <208 223>;
+++				mcast_queue = <288 291>;
+++				l0sp = <52 55>;
+++				l0cdrr = <112 127>;
+++				l0edrr = <112 127>;
+++				l1cdrr = <24 27>;
+++				l1edrr = <24 27>;
+++			};
+++			port@6 {
+++				port_id = <6>;
+++				ucast_queue = <224 239>;
+++				mcast_queue = <292 295>;
+++				l0sp = <56 59>;
+++				l0cdrr = <128 143>;
+++				l0edrr = <128 143>;
+++				l1cdrr = <28 31>;
+++				l1edrr = <28 31>;
+++			};
+++			port@7 {
+++				port_id = <7>;
+++				ucast_queue = <240 255>;
+++				mcast_queue = <296 299>;
+++				l0sp = <60 63>;
+++				l0cdrr = <144 159>;
+++				l0edrr = <144 159>;
+++				l1cdrr = <32 35>;
+++				l1edrr = <32 35>;
+++			};
+++		};
+++		port_scheduler_config {
+++			port@0 {
+++				port_id = <0>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <0 1>; /*L0 SPs*/
+++						/*cpri cdrr epri edrr*/
+++						cfg = <0 0 0 0>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						/*unicast queues*/
+++						ucast_queue = <0 4 8>;
+++						/*multicast queues*/
+++						mcast_queue = <256 260>;
+++						/*sp cpri cdrr epri edrr*/
+++						cfg = <0 0 0 0 0>;
+++					};
+++					group@1 {
+++						ucast_queue = <1 5 9>;
+++						mcast_queue = <257 261>;
+++						cfg = <0 1 1 1 1>;
+++					};
+++					group@2 {
+++						ucast_queue = <2 6 10>;
+++						mcast_queue = <258 262>;
+++						cfg = <0 2 2 2 2>;
+++					};
+++					group@3 {
+++						ucast_queue = <3 7 11>;
+++						mcast_queue = <259 263>;
+++						cfg = <0 3 3 3 3>;
+++					};
+++				};
+++			};
+++			port@1 {
+++				port_id = <1>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <36>;
+++						cfg = <0 8 0 8>;
+++					};
+++					group@1 {
+++						sp = <37>;
+++						cfg = <1 9 1 9>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						ucast_queue = <144>;
+++						ucast_loop_pri = <16>;
+++						mcast_queue = <272>;
+++						mcast_loop_pri = <4>;
+++						cfg = <36 0 48 0 48>;
+++					};
+++				};
+++			};
+++			port@2 {
+++				port_id = <2>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <40>;
+++						cfg = <0 12 0 12>;
+++					};
+++					group@1 {
+++						sp = <41>;
+++						cfg = <1 13 1 13>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						ucast_queue = <160>;
+++						ucast_loop_pri = <16>;
+++						mcast_queue = <276>;
+++						mcast_loop_pri = <4>;
+++						cfg = <40 0 64 0 64>;
+++					};
+++				};
+++			};
+++			port@3 {
+++				port_id = <3>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <44>;
+++						cfg = <0 16 0 16>;
+++					};
+++					group@1 {
+++						sp = <45>;
+++						cfg = <1 17 1 17>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						ucast_queue = <176>;
+++						ucast_loop_pri = <16>;
+++						mcast_queue = <280>;
+++						mcast_loop_pri = <4>;
+++						cfg = <44 0 80 0 80>;
+++					};
+++				};
+++			};
+++			port@4 {
+++				port_id = <4>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <48>;
+++						cfg = <0 20 0 20>;
+++					};
+++					group@1 {
+++						sp = <49>;
+++						cfg = <1 21 1 21>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						ucast_queue = <192>;
+++						ucast_loop_pri = <16>;
+++						mcast_queue = <284>;
+++						mcast_loop_pri = <4>;
+++						cfg = <48 0 96 0 96>;
+++					};
+++				};
+++			};
+++			port@5 {
+++				port_id = <5>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <52>;
+++						cfg = <0 24 0 24>;
+++					};
+++					group@1 {
+++						sp = <53>;
+++						cfg = <1 25 1 25>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						ucast_queue = <208>;
+++						ucast_loop_pri = <16>;
+++						mcast_queue = <288>;
+++						mcast_loop_pri = <4>;
+++						cfg = <52 0 112 0 112>;
+++					};
+++				};
+++			};
+++			port@6 {
+++				port_id = <6>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <56>;
+++						cfg = <0 28 0 28>;
+++					};
+++					group@1 {
+++						sp = <57>;
+++						cfg = <1 29 1 29>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						ucast_queue = <224>;
+++						ucast_loop_pri = <16>;
+++						mcast_queue = <292>;
+++						mcast_loop_pri = <4>;
+++						cfg = <56 0 128 0 128>;
+++					};
+++				};
+++			};
+++			port@7 {
+++				port_id = <7>;
+++				l1scheduler {
+++					group@0 {
+++						sp = <60>;
+++						cfg = <0 32 0 32>;
+++					};
+++					group@1 {
+++						sp = <61>;
+++						cfg = <1 33 1 33>;
+++					};
+++				};
+++				l0scheduler {
+++					group@0 {
+++						ucast_queue = <240>;
+++						ucast_loop_pri = <16>;
+++						mcast_queue = <296>;
+++						cfg = <60 0 144 0 144>;
+++					};
+++				};
+++			};
+++		};
+++	};
+++
+++	dp1 {
+++		device_type = "network";
+++		compatible = "qcom,nss-dp";
+++		qcom,id = <4>;
+++		reg = <0x3a001600 0x200>;
+++		qcom,mactype = <0>;
+++		local-mac-address = [000000000000];
+++		qcom,link-poll = <1>;
+++		qcom,phy-mdio-addr = <3>;
+++		phy-mode = "sgmii";
+++	};
+++
+++	dp2 {
+++		device_type = "network";
+++		compatible = "qcom,nss-dp";
+++		qcom,id = <6>;
+++		reg = <0x3a007000 0x3fff>;
+++		qcom,mactype = <1>;
+++		local-mac-address = [000000000000];
+++		qcom,link-poll = <1>;
+++		qcom,phy-mdio-addr = <8>;
+++		phy-mode = "sgmii";
+++	};
+++	wifi3: wifi3@f00000 {
+++		compatible  = "qcom,cnss-qcn9000";
+++		wlan-en-gpio = <&tlmm 57 0>;
+++		pinctrl-names = "wlan_en_active", "wlan_en_sleep";
+++		pinctrl-0 = <&cnss_wlan_en_active>;
+++		pinctrl-1 = <&cnss_wlan_en_sleep>;
+++		status = "disabled";
+++	};
+++};
+++
+++&serial_blsp4 {
+++       pinctrl-0 = <&uart_pins>;
+++       pinctrl-names = "default";
+++       status = "ok";
+++};
+++
+++&spi_0 { /* BLSP1 QUP1 */
+++	pinctrl-0 = <&spi_0_pins>;
+++	pinctrl-names = "default";
+++	cs-select = <0>;
+++	status = "ok";
+++
+++	m25p80@0 {
+++		#address-cells = <1>;
+++		#size-cells = <1>;
+++		reg = <0>;
+++		compatible = "n25q128a11";
+++		linux,modalias = "m25p80", "n25q128a11";
+++		spi-max-frequency = <50000000>;
+++		use-default-sizes;
+++	};
+++};
+++
+++&serial_blsp2 {
+++	pinctrl-0 = <&hsuart_pins>;
+++	pinctrl-names = "default";
+++	status = "ok";
+++};
+++
+++&msm_imem {
+++	status = "disabled";
+++};
+++
+++&ssphy_0 {
+++	status = "ok";
+++};
+++
+++&qusb_phy_0 {
+++	status = "ok";
+++};
+++
+++&ssphy_1 {
+++	status = "ok";
+++};
+++
+++&qusb_phy_1 {
+++	status = "ok";
+++};
+++
+++&usb3_0 {
+++	status = "ok";
+++};
+++
+++&usb3_1 {
+++	status = "ok";
+++};
+++
+++&cryptobam {
+++	status = "ok";
+++};
+++
+++&crypto {
+++	status = "ok";
+++};
+++
+++&i2c_0 {
+++	pinctrl-0 = <&i2c_0_pins>;
+++	pinctrl-names = "default";
+++	status = "ok";
+++};
+++
+++&i2c_1 {
+++	status = "disabled";
+++};
+++
+++&qpic_bam {
+++	status = "ok";
+++};
+++
+++&nand {
+++	pinctrl-0 = <&qpic_pins>;
+++	pinctrl-names = "default";
+++	status = "ok";
+++};
+++
+++&pcie0 {
+++	status = "disabled";
+++};
++Index: linux-4.4.60-qsdk-10fd7d14853b7020b804acae690c8acec5d954ce/drivers/net/phy/aquantia.c
++===================================================================
++--- linux-4.4.60-qsdk-10fd7d14853b7020b804acae690c8acec5d954ce.orig/drivers/net/phy/aquantia.c
+++++ linux-4.4.60-qsdk-10fd7d14853b7020b804acae690c8acec5d954ce/drivers/net/phy/aquantia.c
++@@ -29,6 +29,7 @@
++ #define PHY_ID_AQR109	0x03a1b502
++ #define PHY_ID_AQR111	0x03a1b610
++ #define PHY_ID_AQR111B0	0x03a1b612
+++#define PHY_ID_AQR111C	0x03a1b7e2
++ #define PHY_ID_AQR112	0x03a1b660
++ #define PHY_ID_AQR113C	0x31c31C10
++ #define PHY_ID_AQR112C	0x03a1b792
++@@ -701,6 +702,23 @@ static struct phy_driver aquantia_driver
++ 	.driver         = { .owner = THIS_MODULE,},
++ },
++ {
+++	.phy_id         = PHY_ID_AQR111C,
+++	.phy_id_mask    = 0xfffffff0,
+++	.name           = "Aquantia AQR111C",
+++	.features       = PHY_AQUANTIA_FEATURES,
+++	.flags          = PHY_HAS_INTERRUPT,
+++	.probe          = aquantia_phy_probe,
+++	.soft_reset     = aquantia_soft_reset,
+++	.config_init    = aquantia_config_init,
+++	.aneg_done      = aquantia_aneg_done,
+++	.config_aneg    = aquantia_config_aneg,
+++	.config_intr    = aquantia_config_intr,
+++	.ack_interrupt  = aquantia_ack_interrupt,
+++	.read_status    = aquantia_read_status,
+++	.update_link    = aquantia_update_link,
+++	.driver         = { .owner = THIS_MODULE,},
+++},
+++{
++ 	.phy_id		= PHY_ID_AQR112,
++ 	.phy_id_mask	= 0xfffffff0,
++ 	.name		= "Aquantia AQR112",
++@@ -790,6 +808,7 @@ static struct mdio_device_id __maybe_unu
++ 	{ PHY_ID_AQR109, 0xfffffff0 },
++ 	{ PHY_ID_AQR111, 0xfffffff0 },
++ 	{ PHY_ID_AQR111B0, 0xfffffff0 },
+++	{ PHY_ID_AQR111C, 0xfffffff0 },
++ 	{ PHY_ID_AQR112, 0xfffffff0 },
++ 	{ PHY_ID_AQR113C, 0xfffffff0 },
++ 	{ PHY_ID_AQR112C, 0xfffffff0 },
+-- 
+2.7.4
+

patches/0055-add-target-linux-ipq807x-files-arch-arm-boot-dts-qco.patch

@@ -0,0 +1,46 @@
+From 623c02020c07a3f94f6c9eed2d0e5c899e1f6b83 Mon Sep 17 00:00:00 2001
+From: "peter.chiu" <peter.chiu@4ipnet.com>
+Date: Thu, 24 Jun 2021 18:13:05 +0800
+Subject: [PATCH] add
+ target/linux/ipq807x/files/arch/arm/boot/dts/qcom-ipq807x-eap106.dts
+
+---
+ .../arch/arm/boot/dts/qcom-ipq807x-eap106.dts      | 26 ++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+ create mode 100644 target/linux/ipq807x/files/arch/arm/boot/dts/qcom-ipq807x-eap106.dts
+
+diff --git a/target/linux/ipq807x/files/arch/arm/boot/dts/qcom-ipq807x-eap106.dts b/target/linux/ipq807x/files/arch/arm/boot/dts/qcom-ipq807x-eap106.dts
+new file mode 100644
+index 0000000..1527f81
+--- /dev/null
++++ b/target/linux/ipq807x/files/arch/arm/boot/dts/qcom-ipq807x-eap106.dts
+@@ -0,0 +1,26 @@
++/*
++ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++#include "../../../arm64/boot/dts/qcom/qcom-ipq807x-eap106.dts"
++
++/ {
++	soc {
++		pmu {
++			compatible = "arm,cortex-a7-pmu";
++			interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
++					IRQ_TYPE_LEVEL_HIGH)>;
++		};
++	};
++};
+-- 
+2.7.4
+

patches/0055-enable-kmod-dwc3-qcom.patch

@@ -0,0 +1,32 @@
+From fa75fce4b170bba40c0f6f756bda06757c0d2377 Mon Sep 17 00:00:00 2001
+From: "peter.chiu" <peter.chiu@4ipnet.com>
+Date: Wed, 30 Jun 2021 17:12:59 +0800
+Subject: [PATCH] enable kmod-dwc3-qcom
+
+---
+ package/kernel/linux/modules/usb.mk | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+ mode change 100644 => 100755 package/kernel/linux/modules/usb.mk
+
+diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk
+old mode 100644
+new mode 100755
+index a88b8df..14ddce2
+--- a/package/kernel/linux/modules/usb.mk
++++ b/package/kernel/linux/modules/usb.mk
+@@ -499,9 +499,10 @@ $(eval $(call KernelPackage,usb-dwc3-of-simple))
+ 
+ define KernelPackage/usb-dwc3-qcom
+   TITLE:=DWC3 Qualcomm USB driver
+-  DEPENDS:=@LINUX_4_19 @(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
++  DEPENDS:=@!LINUX_4_19 @(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x) +kmod-usb-dwc3
+   KCONFIG:= CONFIG_USB_DWC3_QCOM
+-  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
++  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko \
++            $(LINUX_DIR)/drivers/usb/dwc3/dbm.ko@le4.4
+   AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
+   $(call AddDepends/usb)
+ endef
+-- 
+2.7.4
+

profiles/eap101.yml

@@ -6,5 +6,13 @@ description: Build image for the EdgeCore EAP101
 feeds:
   - name: ipq807x
     path: ../../feeds/ipq807x
-
-
+packages:
+    - kmod-usb-dwc3-qcom
+    - kmod-fs-ext4 
+    - kmod-usb-storage 
+    - kmod-usb2 
+    - kmod-usb3
+    - block-mount 
+    - e2fsprogs
+diffconfig: |
+  CONFIG_PACKAGE_kmod-usb-dwc3-of-simple=n

profiles/eap106.yml

@@ -0,0 +1,10 @@
+---
+profile: edgecore_eap106
+target: ipq807x
+subtarget: ipq807x
+description: Build image for the Edgecore EAP106
+feeds:
+  - name: ipq807x
+    path: ../../feeds/ipq807x
+
+