Merge pull request #640 from Telecominfraproject/main

Merge main for RC1 of 3.0.2 patch release

.github/workflows/build-dev.yml

@@ -21,11 +21,16 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf186w', 'cig_wf188n', 'cig_wf194c4', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf196-ca-ath12', 'cig_wf610d', 'cig_wf660a', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap101-ath12', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap104-ath12', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_oap101_6e', 'edgecore_oap101e', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cig_wf660a', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap111', 'edgecore_ecw5211', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap102', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4xi_w', 'hfcl_ion4xi_HMR', 'hfcl_ion4x_w', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'sercomm_ap72tip', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
 
     steps:
     - uses: actions/checkout@v3
 
+    # Clean unnecessary files to save disk space
+    - name: clean unncessary files to save space
+      run: |
+        docker rmi `docker images -q`
+
     - name: Build image for ${{ matrix.target }}
       id: build
       run: |

.github/workflows/x64_vm-build-test.yml

@@ -29,7 +29,7 @@ jobs:
       run: |
         git config --global user.email "you@example.com"
         git config --global user.name "Your Name"
-        make -j TARGET=${{ matrix.target }}
+        make -j TARGET=${{ matrix.target }}        make -j TARGET=${{ matrix.target }}
 
     - name: Package and upload image for ${{ matrix.target }}
       id: package_and_upload_image

LICENSE

@@ -0,0 +1,28 @@
+BSD 3-Clause License
+
+Copyright (c) 2024, Telecom Infra Project
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

config.yml

@@ -1,16 +1,7 @@
 repo:  https://github.com/openwrt/openwrt.git
-branch: openwrt-21.02
-revision: c67509efd7d0c43eb3f622f06c8a31aa28d22f6e
+branch: openwrt-23.05
+revision: e92cf0c46ffe3ac7fca936c18577bfb19eb4ce9e
 output_dir: ./output
 
 patch_folders:
-  - patches/backports/
-  - patches/base
-  - patches/wifi
-  - patches/ath79
-  - patches/ramips
-  - patches/ipq40xx
-  - patches/ipq806x
-  - patches/ipq807x
-  - patches/rest
-  - patches/x86
+  - patches

feeds/bluetooth/nrf52840/files/etc/init.d/nrf52840

@@ -5,7 +5,8 @@ START=80
 boot() {
 	. /lib/functions/system.sh
 	case $(board_name) in
-	edgecore,eap102)
+	edgecore,eap102|\
+	edgecore,oap102)
 		echo 54 > /sys/class/gpio/export
 		echo out > /sys/class/gpio/gpio54/direction
 		echo 0 > /sys/class/gpio/gpio54/value

feeds/ipq40xx/ath10k-ct-firmware/Makefile

@@ -0,0 +1,701 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ath10k-ct-firmware
+PKG_VERSION:=2020-10-07
+PKG_RELEASE:=2
+CTVER1=021
+CTVER2=021
+
+# From fw_lede.bash, or can do it manually as well.
+H988XFC=a4c3d1e2fb80f6b8b9738c7189795ab9505e6c09efc12ba5f08ee7f49e934239
+H988XFCH=93108bd0870652860cdb57749f5a12205ecb15bb1f129d916ad73b6f06406c82
+H9887FC=459692deb186a63ab8eeddb7ad5d54779266e68ca686e7c46062554db6dca12b
+H9887FCH=fd126a457d0927d0c8ea10d66ef5b67d5e1e0741f8692bb3016bb602d0af3098
+H9980FC=52300e9d128c3d506e0b133d7a7964df3115f9511f1b574ef2a0767972c063bd
+H9980FCH=9c20c3a44b701f8fef0fe02f156e382b36b717fb56c76d540f6eac2077ec189b
+H9980CH=55f27045e7cf87a6a5656a050771d6d7a6197153a0737288a702c0836d5c6572
+H9980FHQ=add509b2a15ba90869f403c2e4440dbb91bd7037188d8468249cf1263adfd44e
+H9984FC=e6354a1547a308b4b0fe4cbc29693848c234acedd9e7a483a1b4fb5f9bbf0dc0
+H9984FCH=6e19ecd0b001ffb594a8b033deb2007595b8c0402402789b7de55b208639ebec
+H9984CH=7b6fdf3d970f3eff7c34df476c934a9bebb4f289b7968067950d31b82c71bb07
+H9984FHQ=f6a5d5a3a7b2c9267dc31673a19ee3b5312a2f84f26123cb5e8c000428ed76d2
+H4019FC=cde992cb328680e81cf85e195554699bcceef065c0c696ce4ef90c3311ab11fb
+H4019FCH=818afeb1226389357dfde754d641f936fb82ebe78607f10e15efd5c952a54f48
+H4019CH=30ba10f0d82116c6617cb58c3df5cc81e5ed8f29dbc8f95c0ca9c5013ce4f702
+H4019FHQ=8e4161f7bed5bd56513ca5caab582a6eee64e9e14a69f4de67587563b7b4d735
+H9888FC=d24e66bdb2f1098a2e06ff20fe037e31937e1a483e87c68827830513b4233b5d
+H9888FCH=5891e1c184da433ecc12ca0176ca89a77f7bc2b675576698b69bc93d46b77042
+H9888CH=b94f46cdda6171e5f566b1cdd6aafd68ff1a4f7e8a27762b90eb5d4f03839d99
+H9888FHQ=3cc81f8707bf5ba63bc9ffc14578c77637cae0e15766ae146af02eefb9ab7bfd
+
+include $(INCLUDE_DIR)/package.mk
+
+ATH10K_FIRMWARE_REV:=d622d160e9f552ead68d9ae81b715422892dc2ef
+ATH10K_FIRMWARE_URL:=@GITHUB/kvalo/ath10k-firmware/$(ATH10K_FIRMWARE_REV)
+
+QCA9887_BOARD_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca9887-board.bin
+define Download/qca9887-board
+  FILE:=$(QCA9887_BOARD_FILE)
+  URL:=$(ATH10K_FIRMWARE_URL)/QCA9887/hw1.0
+  URL_FILE:=board.bin
+  HASH:=cf4df099f6ee05c181f55ce17297a1d32c61d725eb96246fd315ad5587c42426
+endef
+$(eval $(call Download,qca9887-board))
+
+QCA988X_BOARD_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca988x-board.bin
+define Download/qca988x-board
+  FILE:=$(QCA988X_BOARD_FILE)
+  URL:=$(ATH10K_FIRMWARE_URL)/QCA988X/hw2.0
+  URL_FILE:=board.bin
+  HASH:=5b5b380333c2dd3b6ce67f30e2f7008f4020bf594970d3b464fd8d4a80fcd880
+endef
+$(eval $(call Download,qca988x-board))
+
+QCA99X0_BOARD_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca99x0-board.bin
+define Download/qca99x0-board
+  FILE:=$(QCA99X0_BOARD_FILE)
+  URL:=$(ATH10K_FIRMWARE_URL)/QCA99X0/hw2.0
+  URL_FILE:=boardData_AR900B_CUS239_5G_v2_001.bin
+  HASH:=3bf7561ee373b369025dcd366d276d038a97d3397ccae41ce841d98a58b30aff
+endef
+$(eval $(call Download,qca99x0-board))
+
+QCA99X0_BOARD2_REV:=ddcec9efd245da9365c474f513a855a55f3ac7fe
+QCA99X0_BOARD2_FILE:=ath10k-firmware-$(QCA99X0_BOARD2_REV)-qca99x0-board-2.bin
+define Download/qca99x0-board2
+  FILE:=$(QCA99X0_BOARD2_FILE)
+  URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0
+  URL_FILE:=board-2.bin?id=$(QCA99X0_BOARD2_REV)
+  HASH:=03711ac21e60ef59d3815e235eb721c0c22851b5410299411085aa6f2af45401
+endef
+$(eval $(call Download,qca99x0-board2))
+
+QCA9984_BOARD2_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca9984-board-2.bin
+define Download/qca9984-board2
+  FILE:=$(QCA9984_BOARD2_FILE)
+  URL:=$(ATH10K_FIRMWARE_URL)/QCA9984/hw1.0
+  URL_FILE:=board-2.bin
+  HASH:=0d6d46cf0467185e3959ce3cb69e2415be6e48ab8a4bee3eb400edbe48cb9c25
+endef
+$(eval $(call Download,qca9984-board2))
+
+QCA4019_BOARD2_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca4019-board-2.bin
+define Download/qca4019-board2
+  FILE:=$(QCA4019_BOARD2_FILE)
+  URL:=$(ATH10K_FIRMWARE_URL)/QCA4019/hw1.0
+  URL_FILE:=board-2.bin
+  HASH:=94b66aa4ddbed5110a96364d3c7b4ebcb320e3ac4e8697660b277e76077bc338
+endef
+$(eval $(call Download,qca4019-board2))
+
+QCA9888_BOARD2_FILE:=ath10k-firmware-$(ATH10K_FIRMWARE_REV)-qca9888-board-2.bin
+define Download/qca9888-board2
+  FILE:=$(QCA9888_BOARD2_FILE)
+  URL:=$(ATH10K_FIRMWARE_URL)/QCA9888/hw2.0
+  URL_FILE:=board-2.bin
+  HASH:=5b871bb567f64525ca45adb88063211de472015d09e0f9aa3fa61ab71c8fdfd3
+endef
+$(eval $(call Download,qca9888-board2))
+
+CT_FIRMWARE_FILE = $(1)-$($(1)_FIRMWARE_FILE_CT)
+CT_FIRMWARE_FILE_FULL_HTT = $(1)-$($(1)_FIRMWARE_FILE_CT_FULL_HTT)
+CT_FIRMWARE_FILE_HTT = $(1)-$($(1)_FIRMWARE_FILE_CT_HTT)
+
+define Download/ct-firmware
+  URL:=https://www.candelatech.com/downloads/$(2)
+  FILE:=$(call CT_FIRMWARE_FILE,$(1))
+  URL_FILE:=$($(1)_FIRMWARE_FILE_CT)
+endef
+
+define Download/ct-firmware-full-htt
+  URL:=https://www.candelatech.com/downloads/$(2)
+  FILE:=$(call CT_FIRMWARE_FILE_FULL_HTT,$(1))
+  URL_FILE:=$($(1)_FIRMWARE_FILE_CT_FULL_HTT)
+endef
+
+define Download/ct-firmware-htt
+  URL:=https://www.candelatech.com/downloads/$(2)
+  FILE:=$(call CT_FIRMWARE_FILE_HTT,$(1))
+  URL_FILE:=$($(1)_FIRMWARE_FILE_CT_HTT)
+endef
+
+QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.$(CTVER1)
+define Download/ath10k-firmware-qca988x-ct
+  $(call Download/ct-firmware,QCA988X,)
+  HASH:=$(H988XFC)
+endef
+$(eval $(call Download,ath10k-firmware-qca988x-ct))
+
+QCA988X_FIRMWARE_FILE_CT_FULL_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.$(CTVER1)
+define Download/ath10k-firmware-qca988x-ct-full-htt
+  $(call Download/ct-firmware-full-htt,QCA988X,)
+  HASH:=$(H988XFCH)
+endef
+$(eval $(call Download,ath10k-firmware-qca988x-ct-full-htt))
+
+
+QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.$(CTVER1)
+define Download/ath10k-firmware-qca9887-ct
+  $(call Download/ct-firmware,QCA9887,ath10k-9887)
+  HASH:=$(H9887FC)
+endef
+$(eval $(call Download,ath10k-firmware-qca9887-ct))
+
+QCA9887_FIRMWARE_FILE_CT_FULL_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.$(CTVER1)
+define Download/ath10k-firmware-qca9887-ct-full-htt
+  $(call Download/ct-firmware-full-htt,QCA9887,ath10k-9887)
+  HASH:=$(H9887FCH)
+endef
+$(eval $(call Download,ath10k-firmware-qca9887-ct-full-htt))
+
+
+QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca99x0-ct
+  $(call Download/ct-firmware,QCA99X0,ath10k-10-4b)
+  HASH:=$(H9980FC)
+endef
+$(eval $(call Download,ath10k-firmware-qca99x0-ct))
+
+QCA99X0_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca99x0-ct-full-htt
+  $(call Download/ct-firmware-full-htt,QCA99X0,ath10k-10-4b)
+  HASH:=$(H9980FCH)
+endef
+$(eval $(call Download,ath10k-firmware-qca99x0-ct-full-htt))
+
+QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca99x0-ct-htt
+  $(call Download/ct-firmware-htt,QCA99X0,ath10k-10-4b)
+  HASH:=$(H9980CH)
+endef
+$(eval $(call Download,ath10k-firmware-qca99x0-ct-htt))
+
+
+QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca9984-ct
+  $(call Download/ct-firmware,QCA9984,ath10k-9984-10-4b)
+  HASH:=$(H9984FC)
+endef
+$(eval $(call Download,ath10k-firmware-qca9984-ct))
+
+QCA9984_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca9984-ct-full-htt
+  $(call Download/ct-firmware-full-htt,QCA9984,ath10k-9984-10-4b)
+  HASH:=$(H9984FCH)
+endef
+$(eval $(call Download,ath10k-firmware-qca9984-ct-full-htt))
+
+QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca9984-ct-htt
+  $(call Download/ct-firmware-htt,QCA9984,ath10k-9984-10-4b)
+  HASH:=$(H9984CH)
+endef
+$(eval $(call Download,ath10k-firmware-qca9984-ct-htt))
+
+
+QCA4019_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca4019-ct
+  $(call Download/ct-firmware,QCA4019,ath10k-4019-10-4b)
+  HASH:=$(H4019FC)
+endef
+$(eval $(call Download,ath10k-firmware-qca4019-ct))
+
+QCA4019_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca4019-ct-full-htt
+  $(call Download/ct-firmware-full-htt,QCA4019,ath10k-4019-10-4b)
+  HASH:=$(H4019FCH)
+endef
+$(eval $(call Download,ath10k-firmware-qca4019-ct-full-htt))
+
+QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca4019-ct-htt
+  $(call Download/ct-firmware-htt,QCA4019,ath10k-4019-10-4b)
+  HASH:=$(H4019CH)
+endef
+$(eval $(call Download,ath10k-firmware-qca4019-ct-htt))
+
+
+QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca9888-ct
+  $(call Download/ct-firmware,QCA9888,ath10k-9888-10-4b)
+  HASH:=$(H9888FC)
+endef
+$(eval $(call Download,ath10k-firmware-qca9888-ct))
+
+QCA9888_FIRMWARE_FILE_CT_FULL_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca9888-ct-full-htt
+  $(call Download/ct-firmware-full-htt,QCA9888,ath10k-9888-10-4b)
+  HASH:=$(H9888FCH)
+endef
+$(eval $(call Download,ath10k-firmware-qca9888-ct-full-htt))
+
+QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-htt-mgt-community-12.bin-lede.$(CTVER2)
+define Download/ath10k-firmware-qca9888-ct-htt
+  $(call Download/ct-firmware-htt,QCA9888,ath10k-9888-10-4b)
+  HASH:=$(H9888CH)
+endef
+$(eval $(call Download,ath10k-firmware-qca9888-ct-htt))
+
+
+define Package/ath10k-ct-firmware-default
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=https://www.candelatech.com/ath10k.php
+  DEPENDS:=
+endef
+
+define Package/ath10k-firmware-qca988x-ct
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.1 firmware for QCA988x devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca988x
+endef
+define Package/ath10k-firmware-qca988x-ct-full-htt
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.1 full-htt-mgt fw for QCA988x
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca988x
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+
+define Package/ath10k-firmware-qca9887-ct
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.1 firmware for QCA9887 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9887
+endef
+define Package/ath10k-firmware-qca9887-ct-full-htt
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.1 full-htt-mgt fw for QCA9887
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9887
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+
+define Package/ath10k-firmware-qca99x0-ct
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 firmware for QCA99x0 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca99x0
+endef
+define Package/ath10k-firmware-qca99x0-ct-full-htt
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 full-htt-mgt fw for QCA99x0
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca99x0
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+define Package/ath10k-firmware-qca99x0-ct-htt
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k CT 10.4 htt-mgt fw for QCA99x0
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca99x0
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+
+define Package/ath10k-firmware-qca9984-ct
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 firmware for QCA9984 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9984
+endef
+define Package/ath10k-firmware-qca9984-ct-full-htt
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 full-htt-mgt fw for QCA9984
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9984
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+define Package/ath10k-firmware-qca9984-ct-htt
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9984
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9984
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+
+define Package/ath10k-firmware-qca4019-ct
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 firmware for QCA4018/9
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca4019
+endef
+define Package/ath10k-firmware-qca4019-ct-full-htt
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 full-htt-mgt for QCA4018/9
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca4019
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+define Package/ath10k-firmware-qca4019-ct-htt
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k CT 10.4 htt-mgt for QCA4018/9
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca4019
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+
+define Package/ath10k-firmware-qca9888-ct
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 fw for QCA9886/8 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9888
+endef
+define Package/ath10k-firmware-qca9888-ct-full-htt
+$(Package/ath10k-ct-firmware-default)
+  TITLE:=ath10k CT 10.4 full-htt-mgt fw for QCA9886/8
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9888
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+define Package/ath10k-firmware-qca9888-ct-htt
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k CT 10.4 htt-mgt fw for QCA9886/8
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  PROVIDES:=ath10k-firmware-qca9888
+  DEPENDS:=+!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
+endef
+
+
+define Package/ath10k-firmware-qca9887-ct/description
+Alternative ath10k firmware for QCA9887 from Candela Technologies.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.1.php
+This firmware conflicts with the standard 9887 firmware, so select only
+one.
+endef
+define Package/ath10k-firmware-qca9887-ct-full-htt/description
+Alternative ath10k firmware for QCA9887 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and fixes .11r authentication.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.1.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+
+define Package/ath10k-firmware-qca988x-ct/description
+Alternative ath10k firmware for QCA988X from Candela Technologies.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.1.php
+This firmware will NOT be used unless the standard ath10k-firmware-qca988x
+is un-selected since the driver will try to load firmware-5.bin before
+firmware-2.bin
+endef
+define Package/ath10k-firmware-qca988x-ct-full-htt/description
+Alternative ath10k firmware for QCA988X from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and fixes .11r authentication.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.1.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+
+define Package/ath10k-firmware-qca99x0-ct/description
+Alternative ath10k firmware for QCA99x0 from Candela Technologies.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware conflicts with the standard 99x0 firmware, so select only
+one.
+endef
+define Package/ath10k-firmware-qca99x0-ct-full-htt/description
+Alternative ath10k firmware for QCA99x0 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+define Package/ath10k-firmware-qca99x0-ct-htt/description
+Alternative ath10k firmware for QCA99x0 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+This firmware lacks a lot of features that ath10k does not use, saving
+a lot of resources.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+
+define Package/ath10k-firmware-qca9984-ct/description
+Alternative ath10k firmware for QCA9984 from Candela Technologies.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware conflicts with the standard 9984 firmware, so select only
+one.
+endef
+define Package/ath10k-firmware-qca9984-ct-full-htt/description
+Alternative ath10k firmware for QCA9984 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+define Package/ath10k-firmware-qca9984-ct-htt/description
+Alternative ath10k firmware for QCA9984 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+This firmware lacks a lot of features that ath10k does not use, saving
+a lot of resources.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+
+define Package/ath10k-firmware-qca4019-ct/description
+Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
+Enables IBSS and other features.  Works with standard or ath10k-ct driver.
+See:  http://www.candelatech.com/ath10k-10.4.php
+endef
+define Package/ath10k-firmware-qca4019-ct-full-htt/description
+Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features.
+See:  http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+define Package/ath10k-firmware-qca4019-ct-htt/description
+Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+This firmware lacks a lot of features that ath10k does not use, saving
+a lot of resources.
+Enables IBSS and other features.
+See:  http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+
+define Package/ath10k-firmware-qca9888-ct/description
+Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware conflicts with the standard 9886 and 9888 firmware, so select only
+one.
+endef
+define Package/ath10k-firmware-qca9888-ct-full-htt/description
+Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+define Package/ath10k-firmware-qca9888-ct-htt/description
+Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
+Uses normal HTT TX data path for management frames, which improves
+stability in busy networks and may be required for .11r authentication.
+This firmware lacks a lot of features that ath10k does not use, saving
+a lot of resources.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.4.php
+This firmware selects and requires the ath10k-ct driver.
+endef
+
+
+define Build/Compile
+
+endef
+
+
+define Package/ath10k-firmware-qca9887-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9887) \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9887_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
+endef
+define Package/ath10k-firmware-qca9887-ct-full-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA9887) \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/ct-firmware-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9887_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
+endef
+
+define Package/ath10k-firmware-qca988x-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA988X_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA988X) \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin
+endef
+define Package/ath10k-firmware-qca988x-ct-full-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA988X_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA988X) \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/ct-firmware-2.bin
+endef
+
+define Package/ath10k-firmware-qca99x0-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA99X0_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA99X0) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
+endef
+define Package/ath10k-firmware-qca99x0-ct-full-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA99X0_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA99X0) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/ct-firmware-5.bin
+endef
+define Package/ath10k-firmware-qca99x0-ct-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA99X0_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA99X0) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/ct-firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca9984-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9984_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9984) \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
+endef
+define Package/ath10k-firmware-qca9984-ct-full-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9984_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA9984) \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/ct-firmware-5.bin
+endef
+define Package/ath10k-firmware-qca9984-ct-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9984_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9984) \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/ct-firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca4019-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA4019_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA4019) \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
+endef
+define Package/ath10k-firmware-qca4019-ct-full-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA4019_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA4019) \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/ct-firmware-5.bin
+endef
+define Package/ath10k-firmware-qca4019-ct-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA4019_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA4019) \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/ct-firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca9888-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
+	ln -s \
+		../../cal-pci-0000:01:00.0.bin \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9888_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9888) \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
+endef
+define Package/ath10k-firmware-qca9888-ct-full-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
+	ln -s \
+		../../cal-pci-0000:01:00.0.bin \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9888_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_FULL_HTT,QCA9888) \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/ct-firmware-5.bin
+endef
+define Package/ath10k-firmware-qca9888-ct-htt/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
+	ln -s \
+		../../cal-pci-0000:01:00.0.bin \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9888_BOARD2_FILE) \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE_HTT,QCA9888) \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/ct-firmware-5.bin
+endef
+
+
+$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct-full-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca988x-ct-full-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct-full-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct-full-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca9984-ct-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct-full-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca4019-ct-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct))
+$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct-full-htt))
+$(eval $(call BuildPackage,ath10k-firmware-qca9888-ct-htt))

feeds/ipq40xx/ath10k-ct/Makefile

@@ -0,0 +1,122 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ath10k-ct
+PKG_RELEASE=1
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=
+
+PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
+PKG_MIRROR_HASH:=37b4f00231cb0ae00f63da1c94ae53c940c76d047ce0fb081c08a35fffbfd2c0
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2021-05-22b
+PKG_SOURCE_VERSION:=54a9ac02f1139596ea4361ebbc3e444955d86cfd
+#PKG_MIRROR_HASH:=97cf22a4a57381c7eb7a9b8a8b1e347e9711ce51c89db971b4ab9a35af476ece
+
+# Build the 5.4 ath10k-ct driver version.  Other option is "-4.19".
+# Probably this should match as closely as
+# possible to whatever mac80211 backports version is being used.
+CT_KVER="-5.7"
+
+PKG_MAINTAINER:=Ben Greear <greearb@candelatech.com>
+PKG_BUILD_PARALLEL:=1
+PKG_EXTMOD_SUBDIRS:=ath10k$(CT_KVER)
+
+STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/ath10k-ct
+  SUBMENU:=Wireless Drivers
+  TITLE:=ath10k-ct driver optimized for CT ath10k firmware
+  DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT @PCI_SUPPORT +kmod-hwmon-core
+  FILES:=\
+	$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_pci.ko \
+	$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_core.ko
+  AUTOLOAD:=$(call AutoProbe,ath10k_pci)
+  PROVIDES:=kmod-ath10k
+  VARIANT:=regular
+endef
+
+define KernelPackage/ath10k-ct/config
+
+       config ATH10K-CT_LEDS
+               bool "Enable LED support"
+               default y
+               depends on PACKAGE_kmod-ath10k-ct || PACKAGE_kmod-ath10k-ct-smallbuffers
+endef
+
+define KernelPackage/ath10k-ct-smallbuffers
+$(call KernelPackage/ath10k-ct)
+  TITLE+= (small buffers for low-RAM devices)
+  VARIANT:=smallbuffers
+endef
+
+NOSTDINC_FLAGS = \
+	-I$(PKG_BUILD_DIR) \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport \
+	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211 \
+	-include backport/autoconf.h \
+	-include backport/backport.h
+
+ifdef CONFIG_PACKAGE_MAC80211_MESH
+  NOSTDINC_FLAGS += -DCONFIG_MAC80211_MESH
+endif
+
+CT_MAKEDEFS += CONFIG_ATH10K=m CONFIG_ATH10K_PCI=m CONFIG_ATH10K_CE=y
+
+# This AHB logic is needed for IPQ4019 radios
+CT_MAKEDEFS += CONFIG_ATH10K_AHB=m
+NOSTDINC_FLAGS += -DCONFIG_ATH10K_AHB
+
+NOSTDINC_FLAGS += -DSTANDALONE_CT
+
+ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
+  CT_MAKEDEFS += CONFIG_ATH10K_DEBUGFS=y CONFIG_MAC80211_DEBUGFS=y
+  NOSTDINC_FLAGS += -DCONFIG_MAC80211_DEBUGFS
+  NOSTDINC_FLAGS += -DCONFIG_ATH10K_DEBUGFS
+endif
+
+ifdef CONFIG_PACKAGE_ATH_DEBUG
+  NOSTDINC_FLAGS += -DCONFIG_ATH10K_DEBUG
+endif
+
+ifdef CONFIG_PACKAGE_ATH_DFS
+  NOSTDINC_FLAGS += -DCONFIG_ATH10K_DFS_CERTIFIED
+endif
+
+ifdef CONFIG_PACKAGE_ATH_SPECTRAL
+  CT_MAKEDEFS += CONFIG_ATH10K_SPECTRAL=y
+  NOSTDINC_FLAGS += -DCONFIG_ATH10K_SPECTRAL
+endif
+
+ifeq ($(CONFIG_ATH10K-CT_LEDS),y)
+  CT_MAKEDEFS += CONFIG_ATH10K_LEDS=y
+  NOSTDINC_FLAGS += -DCONFIG_ATH10K_LEDS
+endif
+
+ifeq ($(BUILD_VARIANT),smallbuffers)
+  NOSTDINC_FLAGS += -DCONFIG_ATH10K_SMALLBUFFERS
+endif
+
+define Build/Configure
+	cp $(STAGING_DIR)/usr/include/mac80211/ath/*.h $(PKG_BUILD_DIR)
+endef
+
+ifneq ($(findstring c,$(OPENWRT_VERBOSE)),)
+  CT_MAKEDEFS += V=1
+endif
+
+define Build/Compile
+	+$(MAKE) $(CT_MAKEDEFS) $(PKG_JOBS) -C "$(LINUX_DIR)" \
+		$(KERNEL_MAKE_FLAGS) \
+		M="$(PKG_BUILD_DIR)/ath10k$(CT_KVER)" \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		modules
+endef
+
+$(eval $(call KernelPackage,ath10k-ct))
+$(eval $(call KernelPackage,ath10k-ct-smallbuffers))

feeds/ipq40xx/ath10k-ct/patches/164-ath10k-commit-rates-from-mac80211.patch

@@ -0,0 +1,37 @@
+From: Sven Eckelmann <sven@narfation.org>
+Date: Tue, 26 Feb 2019 08:06:35 +0100
+Subject: ath10k-ct: apply mac80211 rates to ath10k-ct rate state
+
+The rates from mac80211 have to be copied to the state of ath10k-ct or
+otherwise the ath10k_check_apply_special_rates function overwrites
+them again with some default values. This breaks for example the
+mcast_rate set for a wifi-iface.
+
+Signed-off-by: Sven Eckelmann <sven@narfation.org>
+
+--- a/ath10k-5.4/mac.c
++++ b/ath10k-5.4/mac.c
+@@ -6793,6 +6793,7 @@ static void ath10k_bss_info_changed(stru
+ 			   "mac vdev %d mcast_rate %x\n",
+ 			   arvif->vdev_id, rate);
+ 
++		arvif->mcast_rate[band] = rate;
+ 		vdev_param = ar->wmi.vdev_param->mcast_data_rate;
+ 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ 						vdev_param, rate);
+@@ -6801,6 +6802,7 @@ static void ath10k_bss_info_changed(stru
+ 				    "failed to set mcast rate on vdev %i: %d\n",
+ 				    arvif->vdev_id,  ret);
+ 
++		arvif->bcast_rate[band] = rate;
+ 		vdev_param = ar->wmi.vdev_param->bcast_data_rate;
+ 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ 						vdev_param, rate);
+@@ -6827,6 +6829,7 @@ static void ath10k_bss_info_changed(stru
+ 			return;
+ 		}
+ 
++		arvif->mgt_rate[def.chan->band] = hw_rate_code;
+ 		vdev_param = ar->wmi.vdev_param->mgmt_rate;
+ 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ 						hw_rate_code);

feeds/ipq40xx/ath10k-ct/patches/201-ath10k-add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -0,0 +1,598 @@
+From: Sebastian Gottschall <s.gottschall@newmedia-net.de>
+
+Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based
+chipsets with on chipset connected led's using WMI Firmware API.  The LED
+device will get available named as "ath10k-phyX" at sysfs and can be controlled
+with various triggers.  adds also debugfs interface for gpio control.
+
+This patch is specific for OpenWRt base, as is use old backported package
+with old wireless source. Support for QCA9984 is removed.
+Reworked to use ath10k-ct custom source
+
+
+Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
+Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
+[kvalo: major reorg and cleanup]
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
+---
+
+v13:
+
+* only compile tested!
+
+* fix all checkpatch warnings
+
+* fix commit log
+
+* sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio)
+
+* unsigned -> unsigned int
+
+* remove GPIOLIB code, that should be added in a separate patch
+
+* rename gpio.c to leds.c
+
+* add leds.h
+
+* rename some functions:
+
+  ath10k_attach_led() -> ath10k_leds_register()
+  ath10k_unregister_led() -> ath10k_leds_unregister()
+  ath10k_reset_led_pin() -> ath10k_leds_start()
+
+* call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering
+
+* call ath10k_leds_start() only from ath10k_core_start() and not from mac.c
+
+* rename struct ath10k_gpiocontrol as anonymous function under struct
+  ath10k::leds, no need for memory allocation
+
+* merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller
+
+* remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it
+
+* Kconfig help text improvement and move it lower in the menu, also don't enable it by default
+
+* switch to set_brightness_blocking() so that the callback can sleep,
+  then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex
+  to access ar->state
+
+* don't touch ath10k_wmi_pdev_get_temperature()
+
+* as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface
+
+* remove debugfs interface, that should be added in another patch
+
+* cleanup includes
+
+ ath10k-5.4/Kconfig   |  10 +++
+ ath10k-5.4/Makefile  |   1 +
+ ath10k-5.4/core.c    |  22 +++++++
+ ath10k-5.4/core.h    |   9 ++-
+ ath10k-5.4/hw.h      |   1 +
+ ath10k-5.4/leds.c    | 103 ++++++++++++++++++++++++++++++
+ ath10k-5.4/leds.h    |  45 +++++++++++++
+ ath10k-5.4/mac.c     |   1 +
+ ath10k-5.4/wmi-ops.h |  32 ++++++++++
+ ath10k-5.4/wmi-tlv.c |   2 +
+ ath10k-5.4/wmi.c     |  54 ++++++++++++++++
+ ath10k-5.4/wmi.h     |  35 ++++++++++
+ 12 files changed, 314 insertions(+), 1 deletion(-)
+ create mode 100644 ath10k-5.4/leds.c
+ create mode 100644 ath10k-5.4/leds.h
+
+--- a/ath10k-5.4/Kconfig
++++ b/ath10k-5.4/Kconfig
+@@ -66,6 +66,16 @@ config ATH10K_DEBUGFS
+ 
+ 	  If unsure, say Y to make it easier to debug problems.
+ 
++config ATH10K_LEDS
++	bool "Atheros ath10k LED support"
++	depends on ATH10K
++	select MAC80211_LEDS
++	select LEDS_CLASS
++	select NEW_LEDS
++	default y
++	---help---
++	  This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N.
++
+ config ATH10K_SPECTRAL
+ 	bool "Atheros ath10k spectral scan support"
+ 	depends on ATH10K_DEBUGFS
+--- a/ath10k-5.4/Makefile
++++ b/ath10k-5.4/Makefile
+@@ -19,6 +19,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) +=
+ ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
+ ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
+ ath10k_core-$(CONFIG_THERMAL) += thermal.o
++ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o
+ ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
+ ath10k_core-$(CONFIG_PM) += wow.o
+ ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
+--- a/ath10k-5.4/core.c
++++ b/ath10k-5.4/core.c
+@@ -25,6 +25,7 @@
+ #include "testmode.h"
+ #include "wmi-ops.h"
+ #include "coredump.h"
++#include "leds.h"
+ 
+ /* Disable ath10k-ct DBGLOG output by default */
+ unsigned int ath10k_debug_mask = ATH10K_DBG_NO_DBGLOG;
+@@ -67,6 +68,7 @@ static const struct ath10k_hw_params ath
+ 		.dev_id = QCA988X_2_0_DEVICE_ID,
+ 		.bus = ATH10K_BUS_PCI,
+ 		.name = "qca988x hw2.0",
++		.led_pin = 1,
+ 		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+ 		.uart_pin = 7,
+ 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+@@ -137,6 +139,7 @@ static const struct ath10k_hw_params ath
+ 		.dev_id = QCA9887_1_0_DEVICE_ID,
+ 		.bus = ATH10K_BUS_PCI,
+ 		.name = "qca9887 hw1.0",
++		.led_pin = 1,
+ 		.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
+ 		.uart_pin = 7,
+ 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+@@ -344,6 +347,7 @@ static const struct ath10k_hw_params ath
+ 		.dev_id = QCA99X0_2_0_DEVICE_ID,
+ 		.bus = ATH10K_BUS_PCI,
+ 		.name = "qca99x0 hw2.0",
++		.led_pin = 17,
+ 		.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
+ 		.uart_pin = 7,
+ 		.otp_exe_param = 0x00000700,
+@@ -385,6 +389,7 @@ static const struct ath10k_hw_params ath
+ 		.dev_id = QCA9984_1_0_DEVICE_ID,
+ 		.bus = ATH10K_BUS_PCI,
+ 		.name = "qca9984/qca9994 hw1.0",
++		.led_pin = 17,
+ 		.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
+ 		.uart_pin = 7,
+ 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
+@@ -433,6 +438,7 @@ static const struct ath10k_hw_params ath
+ 		.dev_id = QCA9888_2_0_DEVICE_ID,
+ 		.bus = ATH10K_BUS_PCI,
+ 		.name = "qca9888 hw2.0",
++		.led_pin = 17,
+ 		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
+ 		.uart_pin = 7,
+ 		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
+@@ -3573,6 +3579,10 @@ int ath10k_core_start(struct ath10k *ar,
+ 			ath10k_wmi_check_apply_board_power_ctl_table(ar);
+ 	}
+ 
++	status = ath10k_leds_start(ar);
++	if (status)
++		goto err_hif_stop;
++
+ 	return 0;
+ 
+ err_hif_stop:
+@@ -3829,9 +3839,18 @@ static void ath10k_core_register_work(st
+ 		goto err_spectral_destroy;
+ 	}
+ 
++	status = ath10k_leds_register(ar);
++	if (status) {
++		ath10k_err(ar, "could not register leds: %d\n",
++			   status);
++		goto err_thermal_unregister;
++	}
++
+ 	set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
+ 	return;
+ 
++err_thermal_unregister:
++	ath10k_thermal_unregister(ar);
+ err_spectral_destroy:
+ 	ath10k_spectral_destroy(ar);
+ err_debug_destroy:
+@@ -3891,6 +3910,8 @@ void ath10k_core_unregister(struct ath10
+ 	if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
+ 		return;
+ 
++	ath10k_leds_unregister(ar);
++
+ 	ath10k_thermal_unregister(ar);
+ 	/* Stop spectral before unregistering from mac80211 to remove the
+ 	 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
+--- a/ath10k-5.4/core.h
++++ b/ath10k-5.4/core.h
+@@ -14,6 +14,7 @@
+ #include <linux/pci.h>
+ #include <linux/uuid.h>
+ #include <linux/time.h>
++#include <linux/leds.h>
+ 
+ #include "htt.h"
+ #include "htc.h"
+@@ -1469,6 +1470,13 @@ struct ath10k {
+ 	} testmode;
+ 
+ 	struct {
++		struct gpio_led wifi_led;
++		struct led_classdev cdev;
++		char label[48];
++		u32 gpio_state_pin;
++	} leds;
++
++	struct {
+ 		/* protected by data_lock */
+ 		u32 fw_crash_counter;
+ 		u32 fw_warm_reset_counter;
+--- a/ath10k-5.4/hw.h
++++ b/ath10k-5.4/hw.h
+@@ -518,6 +518,7 @@ struct ath10k_hw_params {
+ 	const char *name;
+ 	u32 patch_load_addr;
+ 	int uart_pin;
++	int led_pin;
+ 	u32 otp_exe_param;
+ 
+ 	/* Type of hw cycle counter wraparound logic, for more info
+--- /dev/null
++++ b/ath10k-5.4/leds.c
+@@ -0,0 +1,103 @@
++/*
++ * Copyright (c) 2005-2011 Atheros Communications Inc.
++ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
++ * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com>
++ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/leds.h>
++
++#include "core.h"
++#include "wmi.h"
++#include "wmi-ops.h"
++
++#include "leds.h"
++
++static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev,
++					       enum led_brightness brightness)
++{
++	struct ath10k *ar = container_of(led_cdev, struct ath10k,
++					 leds.cdev);
++	struct gpio_led *led = &ar->leds.wifi_led;
++
++	mutex_lock(&ar->conf_mutex);
++
++	if (ar->state != ATH10K_STATE_ON)
++		goto out;
++
++	ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low;
++	ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin);
++
++out:
++	mutex_unlock(&ar->conf_mutex);
++
++	return 0;
++}
++
++int ath10k_leds_start(struct ath10k *ar)
++{
++	if (ar->hw_params.led_pin == 0)
++		/* leds not supported */
++		return 0;
++
++	/* under some circumstances, the gpio pin gets reconfigured
++	 * to default state by the firmware, so we need to
++	 * reconfigure it this behaviour has only ben seen on
++	 * QCA9984 and QCA99XX devices so far
++	 */
++	ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0,
++			       WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE);
++	ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1);
++
++	return 0;
++}
++
++int ath10k_leds_register(struct ath10k *ar)
++{
++	int ret;
++
++	if (ar->hw_params.led_pin == 0)
++		/* leds not supported */
++		return 0;
++
++	snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s",
++		 wiphy_name(ar->hw->wiphy));
++	ar->leds.wifi_led.active_low = 1;
++	ar->leds.wifi_led.gpio = ar->hw_params.led_pin;
++	ar->leds.wifi_led.name = ar->leds.label;
++	ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
++
++	ar->leds.cdev.name = ar->leds.label;
++	ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
++
++	/* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
++	ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
++
++	ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++void ath10k_leds_unregister(struct ath10k *ar)
++{
++	if (ar->hw_params.led_pin == 0)
++		/* leds not supported */
++		return;
++
++	led_classdev_unregister(&ar->leds.cdev);
++}
++
+--- /dev/null
++++ b/ath10k-5.4/leds.h
+@@ -0,0 +1,41 @@
++/*
++ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++#ifndef _LEDS_H_
++#define _LEDS_H_
++
++#include "core.h"
++
++#ifdef CONFIG_ATH10K_LEDS
++void ath10k_leds_unregister(struct ath10k *ar);
++int ath10k_leds_start(struct ath10k *ar);
++int ath10k_leds_register(struct ath10k *ar);
++#else
++static inline void ath10k_leds_unregister(struct ath10k *ar)
++{
++}
++
++static inline int ath10k_leds_start(struct ath10k *ar)
++{
++	return 0;
++}
++
++static inline int ath10k_leds_register(struct ath10k *ar)
++{
++	return 0;
++}
++
++#endif
++#endif /* _LEDS_H_ */
+--- a/ath10k-5.4/mac.c
++++ b/ath10k-5.4/mac.c
+@@ -24,6 +24,7 @@
+ #include "wmi-tlv.h"
+ #include "wmi-ops.h"
+ #include "wow.h"
++#include "leds.h"
+ 
+ /*********/
+ /* Rates */
+--- a/ath10k-5.4/wmi-ops.h
++++ b/ath10k-5.4/wmi-ops.h
+@@ -218,7 +218,10 @@ struct wmi_ops {
+ 	struct sk_buff *(*gen_bb_timing)
+ 			(struct ath10k *ar,
+ 			 const struct wmi_bb_timing_cfg_arg *arg);
++	struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num,
++					   u32 input, u32 pull_type, u32 intr_mode);
+ 
++	struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set);
+ };
+ 
+ int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
+@@ -1105,6 +1108,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *
+ 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
+ }
+ 
++static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num,
++					 u32 input, u32 pull_type, u32 intr_mode)
++{
++	struct sk_buff *skb;
++
++	if (!ar->wmi.ops->gen_gpio_config)
++		return -EOPNOTSUPP;
++
++	skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
++	if (IS_ERR(skb))
++		return PTR_ERR(skb);
++
++	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid);
++}
++
++static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
++{
++	struct sk_buff *skb;
++
++	if (!ar->wmi.ops->gen_gpio_config)
++		return -EOPNOTSUPP;
++
++	skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set);
++	if (IS_ERR(skb))
++		return PTR_ERR(skb);
++
++	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid);
++}
++
+ static inline int
+ ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level)
+ {
+--- a/ath10k-5.4/wmi-tlv.c
++++ b/ath10k-5.4/wmi-tlv.c
+@@ -4364,6 +4364,8 @@ static const struct wmi_ops wmi_tlv_ops
+ 	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
+ 	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
+ 	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
++	/* .gen_gpio_config not implemented */
++	/* .gen_gpio_output not implemented */
+ };
+ 
+ static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
+--- a/ath10k-5.4/wmi.c
++++ b/ath10k-5.4/wmi.c
+@@ -8295,6 +8295,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
+ 	return skb;
+ }
+ 
++static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar,
++						     u32 gpio_num, u32 input,
++						     u32 pull_type, u32 intr_mode)
++{
++	struct wmi_gpio_config_cmd *cmd;
++	struct sk_buff *skb;
++
++	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
++	if (!skb)
++		return ERR_PTR(-ENOMEM);
++
++	cmd = (struct wmi_gpio_config_cmd *)skb->data;
++	cmd->pull_type = __cpu_to_le32(pull_type);
++	cmd->gpio_num = __cpu_to_le32(gpio_num);
++	cmd->input = __cpu_to_le32(input);
++	cmd->intr_mode = __cpu_to_le32(intr_mode);
++
++	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n",
++		   gpio_num, input, pull_type, intr_mode);
++
++	return skb;
++}
++
++static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar,
++						     u32 gpio_num, u32 set)
++{
++	struct wmi_gpio_output_cmd *cmd;
++	struct sk_buff *skb;
++
++	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
++	if (!skb)
++		return ERR_PTR(-ENOMEM);
++
++	cmd = (struct wmi_gpio_output_cmd *)skb->data;
++	cmd->gpio_num = __cpu_to_le32(gpio_num);
++	cmd->set = __cpu_to_le32(set);
++
++	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n",
++		   gpio_num, set);
++
++	return skb;
++}
++
+ static struct sk_buff *
+ ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
+ 			     enum wmi_sta_ps_mode psmode)
+@@ -10094,6 +10137,9 @@ static const struct wmi_ops wmi_ops = {
+ 	.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
+ 	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
+ 	.gen_echo = ath10k_wmi_op_gen_echo,
++	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
++
+ 	/* .gen_bcn_tmpl not implemented */
+ 	/* .gen_prb_tmpl not implemented */
+ 	/* .gen_p2p_go_bcn_ie not implemented */
+@@ -10164,6 +10210,8 @@ static const struct wmi_ops wmi_10_1_ops
+ 	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+ 	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
+ 	.gen_echo = ath10k_wmi_op_gen_echo,
++	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ 	/* .gen_bcn_tmpl not implemented */
+ 	/* .gen_prb_tmpl not implemented */
+ 	/* .gen_p2p_go_bcn_ie not implemented */
+@@ -10243,6 +10291,8 @@ static const struct wmi_ops wmi_10_2_ops
+ 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
+ 	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+ 	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
++	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ 	/* .gen_pdev_enable_adaptive_cca not implemented */
+ };
+ 
+@@ -10314,6 +10364,8 @@ static const struct wmi_ops wmi_10_2_4_o
+ 		ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
+ 	.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
+ 	.gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
++	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ 	/* .gen_bcn_tmpl not implemented */
+ 	/* .gen_prb_tmpl not implemented */
+ 	/* .gen_p2p_go_bcn_ie not implemented */
+@@ -10395,6 +10447,8 @@ static const struct wmi_ops wmi_10_4_ops
+ 	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
+ 	.gen_echo = ath10k_wmi_op_gen_echo,
+ 	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
++	.gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
++	.gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
+ };
+ 
+ int ath10k_wmi_attach(struct ath10k *ar)
+--- a/ath10k-5.4/wmi.h
++++ b/ath10k-5.4/wmi.h
+@@ -3110,6 +3110,41 @@ enum wmi_10_4_feature_mask {
+ 
+ };
+ 
++/* WMI_GPIO_CONFIG_CMDID */
++enum {
++	WMI_GPIO_PULL_NONE,
++	WMI_GPIO_PULL_UP,
++	WMI_GPIO_PULL_DOWN,
++};
++
++enum {
++	WMI_GPIO_INTTYPE_DISABLE,
++	WMI_GPIO_INTTYPE_RISING_EDGE,
++	WMI_GPIO_INTTYPE_FALLING_EDGE,
++	WMI_GPIO_INTTYPE_BOTH_EDGE,
++	WMI_GPIO_INTTYPE_LEVEL_LOW,
++	WMI_GPIO_INTTYPE_LEVEL_HIGH
++};
++
++/* WMI_GPIO_CONFIG_CMDID */
++struct wmi_gpio_config_cmd {
++	__le32 gpio_num;             /* GPIO number to be setup */
++	__le32 input;                /* 0 - Output/ 1 - Input */
++	__le32 pull_type;            /* Pull type defined above */
++	__le32 intr_mode;            /* Interrupt mode defined above (Input) */
++} __packed;
++
++/* WMI_GPIO_OUTPUT_CMDID */
++struct wmi_gpio_output_cmd {
++	__le32 gpio_num;    /* GPIO number to be setup */
++	__le32 set;         /* Set the GPIO pin*/
++} __packed;
++
++/* WMI_GPIO_INPUT_EVENTID */
++struct wmi_gpio_input_event {
++	__le32 gpio_num;    /* GPIO number which changed state */
++} __packed;
++
+ struct wmi_ext_resource_config_10_4_cmd {
+ 	/* contains enum wmi_host_platform_type */
+ 	__le32 host_platform_config;

feeds/ipq40xx/ath10k-ct/patches/202-ath10k-use-tpt-trigger-by-default.patch

@@ -0,0 +1,53 @@
+From 79c9d7aabae1d1da9eea97d83b61e1517a8a2221 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Fri, 22 Jun 2018 18:59:44 +0200
+Subject: [PATCH] ath10k: use tpt LED trigger by default
+
+Use the tpt LED trigger for each created phy led. Ths way LEDs attached
+to the ath10k GPIO pins are indicating the phy status and blink on
+traffic.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ ath10k-5.4/core.h | 4 ++++
+ ath10k-5.4/leds.c | 4 +---
+ ath10k-5.4/mac.c  | 2 +-
+ 3 files changed, 6 insertions(+), 4 deletions(-)
+
+--- a/ath10k-5.4/core.h
++++ b/ath10k-5.4/core.h
+@@ -1573,6 +1573,10 @@ struct ath10k {
+ 	u8 csi_data[4096];
+ 	u16 csi_data_len;
+ 
++#ifdef CPTCFG_MAC80211_LEDS
++	const char *led_default_trigger;
++#endif
++
+ 	/* must be last */
+ 	u8 drv_priv[0] __aligned(sizeof(void *));
+ };
+--- a/ath10k-5.4/leds.c
++++ b/ath10k-5.4/leds.c
+@@ -81,9 +81,7 @@ int ath10k_leds_register(struct ath10k *
+ 
+ 	ar->leds.cdev.name = ar->leds.label;
+ 	ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
+-
+-	/* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
+-	ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
++	ar->leds.cdev.default_trigger = ar->led_default_trigger;
+ 
+ 	ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
+ 	if (ret)
+--- a/ath10k-5.4/mac.c
++++ b/ath10k-5.4/mac.c
+@@ -10367,7 +10367,7 @@ int ath10k_mac_register(struct ath10k *a
+ 	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
+ 
+ #ifdef CPTCFG_MAC80211_LEDS
+-	ieee80211_create_tpt_led_trigger(ar->hw,
++	ar->led_default_trigger = ieee80211_create_tpt_led_trigger(ar->hw,
+ 		IEEE80211_TPT_LEDTRIG_FL_RADIO, ath10k_tpt_blink,
+ 		ARRAY_SIZE(ath10k_tpt_blink));
+ #endif

feeds/ipq40xx/ath10k-ct/patches/205-ath10k-Add-NL80211_EXT_FEATURE_AQL-flag.patch

@@ -0,0 +1,10 @@
+--- a/ath10k-5.4/mac.c
++++ b/ath10k-5.4/mac.c
+@@ -10180,6 +10180,7 @@ int ath10k_mac_register(struct ath10k *a
+ 	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
+ 	wiphy_ext_feature_set(ar->hw->wiphy,
+ 			      NL80211_EXT_FEATURE_SET_SCAN_DWELL);
++	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_AQL);
+ 
+ 	if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, ar->wmi.svc_map) ||
+ 	    test_bit(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, ar->wmi.svc_map))

feeds/ipq40xx/ath10k-ct/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch

@@ -0,0 +1,14 @@
+--- a/ath10k-5.4/htt.h
++++ b/ath10k-5.4/htt.h
+@@ -225,7 +225,11 @@ enum htt_rx_ring_flags {
+ };
+ 
+ #define HTT_RX_RING_SIZE_MIN 128
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ #define HTT_RX_RING_SIZE_MAX 2048
++#else
++#define HTT_RX_RING_SIZE_MAX 512
++#endif
+ #define HTT_RX_RING_SIZE HTT_RX_RING_SIZE_MAX
+ #define HTT_RX_RING_FILL_LEVEL (((HTT_RX_RING_SIZE) / 2) - 1)
+ #define HTT_RX_RING_FILL_LEVEL_DUAL_MAC (HTT_RX_RING_SIZE - 1)

feeds/ipq40xx/ath10k-ct/patches/960-0011-ath10k-limit-pci-buffer-size.patch

@@ -0,0 +1,50 @@
+--- a/ath10k-5.4/pci.c
++++ b/ath10k-5.4/pci.c
+@@ -131,7 +131,11 @@ static struct ce_attr host_ce_config_wla
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 512,
++#else
++		.dest_nentries = 128,
++#endif
+ 		.recv_cb = ath10k_pci_htt_htc_rx_cb,
+ 	},
+ 
+@@ -140,7 +144,11 @@ static struct ce_attr host_ce_config_wla
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 128,
++#else
++		.dest_nentries = 64,
++#endif
+ 		.recv_cb = ath10k_pci_htc_rx_cb,
+ 	},
+ 
+@@ -167,7 +175,11 @@ static struct ce_attr host_ce_config_wla
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 512,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 512,
++#else
++		.dest_nentries = 128,
++#endif
+ 		.recv_cb = ath10k_pci_htt_rx_cb,
+ 	},
+ 
+@@ -192,7 +204,11 @@ static struct ce_attr host_ce_config_wla
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 128,
++#else
++		.dest_nentries = 96,
++#endif
+ 		.recv_cb = ath10k_pci_pktlog_rx_cb,
+ 	},
+ 

feeds/ipq40xx/ath10k-ct/patches/960-0012-ath10k-add_cmd_processing_time_for_scan_timeout.patch

@@ -0,0 +1,22 @@
+diff -Naur a/ath10k-5.7/mac.c b/ath10k-5.7/mac.c
+--- a/ath10k-5.7/mac.c	2021-06-09 16:30:17.793556032 -0400
++++ b/ath10k-5.7/mac.c	2021-06-09 17:38:08.587733979 -0400
+@@ -7103,13 +7103,15 @@
+ 		scan_timeout = min_t(u32, arg.max_rest_time *
+ 				(arg.n_channels - 1) + (req->duration +
+ 				ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
+-				arg.n_channels, arg.max_scan_time + 200);
++				arg.n_channels, arg.max_scan_time);
+ 
+ 	} else {
+-		/* Add a 200ms margin to account for event/command processing */
+-		scan_timeout = arg.max_scan_time + 200;
++		scan_timeout = arg.max_scan_time;
+ 	}
+ 
++	/* Add a 200ms margin to account for event/command processing */
++	scan_timeout += 200;
++
+ 	ret = ath10k_start_scan(ar, &arg);
+ 	if (ret) {
+ 		ath10k_warn(ar, "failed to start hw scan: %d\n", ret);

feeds/ipq40xx/ath10k-ct/patches/970-accumulate-survey-info-data

@@ -0,0 +1,11 @@
+--- a/ath10k-5.7/mac.c	2021-07-06 11:12:56.022146449 -0700
++++ b/ath10k-5.7/mac.c	2021-07-06 19:37:52.352753693 -0700
+@@ -8286,7 +8286,7 @@
+ 				  struct ieee80211_channel *channel)
+ {
+ 	int ret;
+-	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
++	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ;
+ 
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 

feeds/ipq40xx/ath10k-ct/patches/970-add-survey-local-bss-receive-time

@@ -0,0 +1,31 @@
+--- a/ath10k-5.7/wmi.c
++++ b/ath10k-5.7/wmi.c
+@@ -6347,16 +6347,18 @@
+ 
+ 	survey = &ar->survey[idx];
+ 
+-	survey->noise     = noise_floor;
+-	survey->time      = div_u64(total, cc_freq_hz);
+-	survey->time_busy = div_u64(busy, cc_freq_hz);
+-	survey->time_rx   = div_u64(rx_bss, cc_freq_hz);
+-	survey->time_tx   = div_u64(tx, cc_freq_hz);
+-	survey->filled   |= (SURVEY_INFO_NOISE_DBM |
+-			     SURVEY_INFO_TIME |
+-			     SURVEY_INFO_TIME_BUSY |
+-			     SURVEY_INFO_TIME_RX |
+-			     SURVEY_INFO_TIME_TX);
++	survey->noise       = noise_floor;
++	survey->time        = div_u64(total, cc_freq_hz);
++	survey->time_busy   = div_u64(busy, cc_freq_hz);
++	survey->time_rx     = div_u64(rx, cc_freq_hz);
++	survey->time_bss_rx = div_u64(rx_bss, cc_freq_hz);
++	survey->time_tx     = div_u64(tx, cc_freq_hz);
++	survey->filled     |= (SURVEY_INFO_NOISE_DBM |
++			       SURVEY_INFO_TIME |
++			       SURVEY_INFO_TIME_BUSY |
++			       SURVEY_INFO_TIME_RX |
++			       SURVEY_INFO_TIME_TX |
++			       SURVEY_INFO_TIME_BSS_RX);
+ exit:
+ 	spin_unlock_bh(&ar->data_lock);
+ 	complete(&ar->bss_survey_done);

feeds/ipq40xx/ath10k-ct/patches/999-ath10k-threading.patch

@@ -0,0 +1,14 @@
+Index: ath10k-ct-2021-05-22b-54a9ac02/ath10k-5.7/core.c
+===================================================================
+--- ath10k-ct-2021-05-22b-54a9ac02.orig/ath10k-5.7/core.c
++++ ath10k-ct-2021-05-22b-54a9ac02/ath10k-5.7/core.c
+@@ -4146,6 +4146,9 @@ struct ath10k *ath10k_core_create(size_t
+ 	INIT_WORK(&ar->stop_scan_work, ath10k_wmi_stop_scan_work);
+ 
+ 	init_dummy_netdev(&ar->napi_dev);
++	snprintf(ar->napi_dev.name, sizeof(ar->napi_dev.name), "%s",
++		 wiphy_name(ar->hw->wiphy));
++	ar->napi_dev.threaded = 1;
+ 
+ 	ret = ath10k_coredump_create(ar);
+ 	if (ret)

feeds/ipq40xx/ath10k-firmware/Makefile

@@ -0,0 +1,182 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ath10k-firmware
+PKG_SOURCE_DATE:=2019-10-03
+PKG_SOURCE_VERSION:=d622d160e9f552ead68d9ae81b715422892dc2ef
+PKG_MIRROR_HASH:=2e504e071c3f896d629c4cfffe7ff4b5f1acdb4fecd3f01e8ff8c73e87a67cc7
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git
+
+PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ath10k-firmware-default
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=$(PKG_SOURCE_URL)
+  DEPENDS:=
+endef
+
+define Package/ath10k-firmware-qca9887
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k firmware for QCA9887 devices
+endef
+
+define Package/ath10k-firmware-qca9888
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k firmware for QCA9888 devices
+endef
+
+define Package/ath10k-firmware-qca988x
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k firmware for QCA988x devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+endef
+
+define Package/ath10k-firmware-qca99x0
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k firmware for QCA99x0 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+endef
+
+define Package/ath10k-firmware-qca99x0/description
+Standard ath10k firmware for QCA99x0 from QCA
+This firmware conflicts with the CT 99x0 firmware, so select only
+one.
+endef
+
+define Package/ath10k-firmware-qca9984
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k firmware for QCA9984 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+endef
+
+define Package/ath10k-firmware-qca4019
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k firmware for IPQ/QCA4019 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+endef
+
+define Package/ath10k-firmware-qca6174
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k firmware for QCA6174 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+endef
+
+QCA99X0_BOARD_REV:=ddcec9efd245da9365c474f513a855a55f3ac7fe
+QCA99X0_BOARD_FILE:=board-2.bin.$(QCA99X0_BOARD_REV)
+
+define Download/qca99x0-board
+  URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA99X0/hw2.0
+  URL_FILE:=board-2.bin?id=$(QCA99X0_BOARD_REV)
+  FILE:=$(QCA99X0_BOARD_FILE)
+  HASH:=03711ac21e60ef59d3815e235eb721c0c22851b5410299411085aa6f2af45401
+endef
+$(eval $(call Download,qca99x0-board))
+
+define Build/Compile
+
+endef
+
+define Package/ath10k-firmware-qca4019/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA4019/hw1.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA4019/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00057 \
+		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca9887/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA9887/hw1.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00047 \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-5.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA9887/hw1.0/board.bin \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
+endef
+
+define Package/ath10k-firmware-qca9888/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA9888/hw2.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA9888/hw2.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
+		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca988x/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA988X/hw2.0/board.bin \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA988X/hw2.0/10.2.4-1.0/firmware-5.bin_10.2.4-1.0-00047 \
+		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca6174/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw2.1
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA6174/hw2.1/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA6174/hw2.1/
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA6174/hw2.1/firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 \
+		$(1)/lib/firmware/ath10k/QCA6174/hw2.1/firmware-5.bin
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw3.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA6174/hw3.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA6174/hw3.0/
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA6174/hw3.0/4.4.1.c1/firmware-6.bin_RM.4.4.1.c1-00042-QCARMSWP-1 \
+		$(1)/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin
+endef
+
+define Package/ath10k-firmware-qca99x0/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA99X0_BOARD_FILE) \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA99X0/hw2.0/boardData_AR900B_CUS239_5G_v2_001.bin \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/board.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA99X0/hw2.0/firmware-5.bin_10.4.1.00030-1 \
+		$(1)/lib/firmware/ath10k/QCA99X0/hw2.0/firmware-5.bin
+endef
+
+define Package/ath10k-firmware-qca9984/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA9984/hw1.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/QCA9984/hw1.0/3.5.3/firmware-5.bin_10.4-3.5.3-00053 \
+		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/firmware-5.bin
+endef
+
+$(eval $(call BuildPackage,ath10k-firmware-qca9887))
+#$(eval $(call BuildPackage,ath10k-firmware-qca9888))
+$(eval $(call BuildPackage,ath10k-firmware-qca988x))
+#$(eval $(call BuildPackage,ath10k-firmware-qca99x0))
+#$(eval $(call BuildPackage,ath10k-firmware-qca6174))
+#$(eval $(call BuildPackage,ath10k-firmware-qca9984))
+#$(eval $(call BuildPackage,ath10k-firmware-qca4019))

feeds/ipq40xx/batctl/Makefile

@@ -0,0 +1,231 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=batctl
+PKG_VERSION:=2020.2
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
+PKG_HASH:=d29cdb53ee68abd5027eae07d9fd645b3f154e0d577efa2666c1334bb6d60efd
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_MAINTAINER:=Simon Wunderlich <sw@simonwunderlich.de>
+PKG_LICENSE:=GPL-2.0-only ISC MIT
+PKG_LICENSE_FILES:=LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT LICENSES/deprecated/ISC
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/batctl/Default
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=https://www.open-mesh.org/
+  DEPENDS:=+libnl-tiny +libc +librt
+  PROVIDES:=batctl
+endef
+
+define Package/batctl/description
+  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
+  It is an easier method for configuring batman-adv and provides some
+  additional tools for debugging as well. This package builds
+  version $(PKG_VERSION) of the user space utility.
+endef
+
+define Package/batctl-tiny
+$(call Package/batctl/Default)
+  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Minimal)
+  VARIANT:=tiny
+  ALTERNATIVES:=100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
+endef
+
+define Package/batctl-tiny/description
+$(Package/batctl/description)
+  Only configuration relevant subcommands are enabled.
+endef
+
+define Package/batctl-default
+$(call Package/batctl/Default)
+  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Default)
+  VARIANT:=default
+  ALTERNATIVES:=200:/usr/sbin/batctl:/usr/libexec/batctl-default
+endef
+
+define Package/batctl-default/description
+$(Package/batctl/description)
+  Standard subcommands for configuration and online debugging are enabled.
+endef
+
+define Package/batctl-full
+$(call Package/batctl/Default)
+  TITLE:=B.A.T.M.A.N. Advanced user space configuration tool (Full)
+  VARIANT:=full
+  ALTERNATIVES:=300:/usr/sbin/batctl:/usr/libexec/batctl-full
+endef
+
+define Package/batctl-full/description
+$(Package/batctl/description)
+  Subcommands for configuration, online and offline debugging are enabled.
+endef
+
+# The linker can identify unused sections of a binary when each symbol is stored
+# in a separate section. This mostly removes unused linker sections and reduces
+# the size by ~3% on mipsel.
+
+TARGET_CFLAGS  += -ffunction-sections -fdata-sections
+TARGET_LDFLAGS += -Wl,--gc-sections
+
+# Link-time optimization allows to move parts of the optimization from the single
+# source file to the global source view. This is done by emitting the GIMPLE
+# representation in each object file and analyzing it again during the link step.
+
+TARGET_CFLAGS  += -flto
+TARGET_LDFLAGS += -fuse-linker-plugin
+
+MAKE_VARS += \
+        LIBNL_NAME="libnl-tiny" \
+        LIBNL_GENL_NAME="libnl-tiny"
+
+MAKE_FLAGS += \
+        REVISION="$(PKG_VERSION)-openwrt-$(PKG_RELEASE)"
+
+config-n := \
+	aggregation \
+	ap_isolation \
+	backbonetable \
+	bisect_iv \
+	bonding \
+	bridge_loop_avoidance \
+	claimtable \
+	dat_cache \
+	distributed_arp_table \
+	elp_interval \
+	event \
+	fragmentation \
+	gateways \
+	gw_mode \
+	hop_penalty \
+	interface \
+	isolation_mark \
+	loglevel \
+	mcast_flags \
+	multicast_fanout \
+	multicast_forceflood \
+	multicast_mode \
+	nc_nodes \
+	neighbors \
+	network_coding \
+	orig_interval \
+	originators \
+	ping \
+	routing_algo \
+	statistics \
+	tcpdump \
+	throughput_override \
+	throughputmeter \
+	traceroute \
+	transglobal \
+	translate \
+	translocal \
+
+config-settings := \
+	aggregation \
+	ap_isolation \
+	bonding \
+	bridge_loop_avoidance \
+	distributed_arp_table \
+	elp_interval \
+	fragmentation \
+	gw_mode \
+	hop_penalty \
+	interface \
+	isolation_mark \
+	loglevel \
+	multicast_fanout \
+	multicast_forceflood \
+	multicast_mode \
+	network_coding \
+	orig_interval \
+	routing_algo \
+	throughput_override \
+
+config-tables := \
+	backbonetable \
+	claimtable \
+	dat_cache \
+	gateways \
+	loglevel \
+	nc_nodes \
+	neighbors \
+	originators \
+	statistics \
+	transglobal \
+	translocal \
+
+config-tools := \
+	event \
+	ping \
+	tcpdump \
+	throughputmeter \
+	traceroute \
+	translate \
+
+config-extratools := \
+	bisect_iv \
+
+ifeq ($(BUILD_VARIANT),tiny)
+
+config-y := \
+	$(config-settings) \
+
+endif
+
+ifeq ($(BUILD_VARIANT),default)
+
+config-y := \
+	$(config-settings) \
+	$(config-tables) \
+	$(config-tools) \
+
+endif
+
+ifeq ($(BUILD_VARIANT),full)
+
+config-y := \
+	$(config-settings) \
+	$(config-tables) \
+	$(config-tools) \
+	$(config-extratools) \
+
+endif
+
+define ConfigVars
+$(subst $(space),,$(foreach opt,$(config-$(1)),CONFIG_$(opt)=$(1)
+))
+endef
+
+define batctl_config
+$(call ConfigVars,n)$(call ConfigVars,y)
+endef
+$(eval $(call shexport,batctl_config))
+
+MAKE_FLAGS += $$$$$(call shvar,batctl_config)
+
+define Package/batctl-tiny/install
+	$(INSTALL_DIR) $(1)/usr/libexec
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-tiny
+endef
+
+define Package/batctl-default/install
+	$(INSTALL_DIR) $(1)/usr/libexec
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-default
+endef
+
+define Package/batctl-full/install
+	$(INSTALL_DIR) $(1)/usr/libexec
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/batctl $(1)/usr/libexec/batctl-full
+endef
+
+$(eval $(call BuildPackage,batctl-default))
+$(eval $(call BuildPackage,batctl-tiny))
+$(eval $(call BuildPackage,batctl-full))

feeds/ipq40xx/batman-adv/Config.in

@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2007-2019  B.A.T.M.A.N. contributors:
+#
+# Marek Lindner, Simon Wunderlich
+
+#
+# B.A.T.M.A.N meshing protocol
+#
+
+config BATMAN_ADV_BATMAN_V
+	bool "B.A.T.M.A.N. V protocol"
+	depends on PACKAGE_kmod-batman-adv
+	default y
+	help
+	  This option enables the B.A.T.M.A.N. V protocol, the successor
+	  of the currently used B.A.T.M.A.N. IV protocol. The main
+	  changes include splitting of the OGM protocol into a neighbor
+	  discovery protocol (Echo Location Protocol, ELP) and a new OGM
+	  Protocol OGMv2 for flooding protocol information through the
+	  network, as well as a throughput based metric.
+	  B.A.T.M.A.N. V is currently considered experimental and not
+	  compatible to B.A.T.M.A.N. IV networks.
+
+config BATMAN_ADV_BLA
+	bool "Bridge Loop Avoidance"
+	depends on PACKAGE_kmod-batman-adv
+	select PACKAGE_kmod-lib-crc16
+	default y
+	help
+	  This option enables BLA (Bridge Loop Avoidance), a mechanism
+	  to avoid Ethernet frames looping when mesh nodes are connected
+	  to both the same LAN and the same mesh. If you will never use
+	  more than one mesh node in the same LAN, you can safely remove
+	  this feature and save some space.
+
+config BATMAN_ADV_DAT
+	bool "Distributed ARP Table"
+	depends on PACKAGE_kmod-batman-adv
+	default y
+	help
+	  This option enables DAT (Distributed ARP Table), a DHT based
+	  mechanism that increases ARP reliability on sparse wireless
+	  mesh networks. If you think that your network does not need
+	  this option you can safely remove it and save some space.
+
+config BATMAN_ADV_NC
+	bool "Network Coding"
+	depends on PACKAGE_kmod-batman-adv
+	help
+	  This option enables network coding, a mechanism that aims to
+	  increase the overall network throughput by fusing multiple
+	  packets in one transmission.
+	  Note that interfaces controlled by batman-adv must be manually
+	  configured to have promiscuous mode enabled in order to make
+	  network coding work.
+	  If you think that your network does not need this feature you
+	  can safely disable it and save some space.
+
+config BATMAN_ADV_MCAST
+	bool "Multicast optimisation"
+	depends on PACKAGE_kmod-batman-adv
+	default y
+	help
+	  This option enables the multicast optimisation which aims to
+	  reduce the air overhead while improving the reliability of
+	  multicast messages.
+
+config BATMAN_ADV_DEBUGFS
+	bool "batman-adv debugfs entries"
+	depends on PACKAGE_kmod-batman-adv
+	select KERNEL_DEBUG_FS
+	help
+	  Enable this to export routing related debug tables via debugfs.
+	  The information for each soft-interface and used hard-interface can be
+	  found under batman_adv/
+
+	  If unsure, say N.
+
+config BATMAN_ADV_DEBUG
+	bool "B.A.T.M.A.N. debugging"
+	depends on PACKAGE_kmod-batman-adv
+	help
+	  This is an option for use by developers; most people should
+	  say N here. This enables compilation of support for
+	  outputting debugging information to the debugfs log or tracing
+	  buffer. The output is controlled via the batadv netdev specific
+	  log_level setting.
+
+config BATMAN_ADV_SYSFS
+	bool "batman-adv sysfs entries"
+	depends on PACKAGE_kmod-batman-adv
+	help
+	  Say Y here if you want to enable batman-adv device configuration and
+	  status interface through sysfs attributes. It is replaced by the
+	  batadv generic netlink family but still used by various userspace
+	  tools and scripts.
+
+	  If unsure, say Y.
+
+config BATMAN_ADV_TRACING
+	bool "B.A.T.M.A.N. tracing support"
+	depends on PACKAGE_kmod-batman-adv
+	select KERNEL_FTRACE
+	select KERNEL_ENABLE_DEFAULT_TRACERS
+	help
+	  This is an option for use by developers; most people should
+	  say N here. Select this option to gather traces like the debug
+	  messages using the generic tracing infrastructure of the kernel.
+	  BATMAN_ADV_DEBUG must also be selected to get trace events for
+	  batadv_dbg.

feeds/ipq40xx/batman-adv/Makefile

@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=batman-adv
+PKG_VERSION:=2020.2
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
+PKG_HASH:=a73f5ce72c6efa9dd7bd7cc8daa667d0982e12e40811c978bb652607bb5666a3
+PKG_EXTMOD_SUBDIRS:=net/batman-adv
+
+PKG_MAINTAINER:=Simon Wunderlich <sw@simonwunderlich.de>
+PKG_LICENSE:=GPL-2.0-only MIT
+PKG_LICENSE_FILES:=LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT
+
+STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/batman-adv
+  SUBMENU:=Network Support
+  TITLE:=B.A.T.M.A.N. Adv
+  URL:=https://www.open-mesh.org/
+  DEPENDS:=+BATMAN_ADV_BLA:kmod-lib-crc16 +kmod-lib-crc32c +kmod-cfg80211 +batctl
+  FILES:=$(PKG_BUILD_DIR)/net/batman-adv/batman-adv.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoProbe,batman-adv)
+endef
+
+define KernelPackage/batman-adv/description
+  B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
+  a routing protocol for multi-hop ad-hoc mesh networks. The
+  networks may be wired or wireless. See
+  https://www.open-mesh.org/ for more information and user space
+  tools. This package builds version $(PKG_VERSION) of the kernel
+  module.
+endef
+
+define KernelPackage/batman-adv/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/kmod-batman-adv/conffiles
+/etc/config/batman-adv
+endef
+
+PKG_EXTRA_KCONFIG:= \
+	CONFIG_BATMAN_ADV=m \
+	CONFIG_BATMAN_ADV_DEBUG=$(if $(CONFIG_BATMAN_ADV_DEBUG),y,n) \
+	CONFIG_BATMAN_ADV_DEBUGFS=$(if $(CONFIG_BATMAN_ADV_DEBUGFS),y,n) \
+	CONFIG_BATMAN_ADV_BLA=$(if $(CONFIG_BATMAN_ADV_BLA),y,n) \
+	CONFIG_BATMAN_ADV_DAT=$(if $(CONFIG_BATMAN_ADV_DAT),y,n) \
+	CONFIG_BATMAN_ADV_MCAST=$(if $(CONFIG_BATMAN_ADV_MCAST),y,n) \
+	CONFIG_BATMAN_ADV_NC=$(if $(CONFIG_BATMAN_ADV_NC),y,n) \
+	CONFIG_BATMAN_ADV_BATMAN_V=$(if $(CONFIG_BATMAN_ADV_BATMAN_V),y,n) \
+	CONFIG_BATMAN_ADV_SYSFS=$(if $(CONFIG_BATMAN_ADV_SYSFS),y,n) \
+	CONFIG_BATMAN_ADV_TRACING=$(if $(CONFIG_BATMAN_ADV_TRACING),y,n) \
+
+PKG_EXTRA_CFLAGS:= \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(PKG_EXTRA_KCONFIG)))) \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(PKG_EXTRA_KCONFIG)))) \
+
+NOSTDINC_FLAGS = \
+	-I$(PKG_BUILD_DIR)/net/batman-adv \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211 \
+	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
+	-I$(PKG_BUILD_DIR)/include/ \
+	-include backport/autoconf.h \
+	-include backport/backport.h \
+	-include $(PKG_BUILD_DIR)/compat-hacks.h \
+	-DBATADV_SOURCE_VERSION=\\\"$(PKG_VERSION)-openwrt-$(PKG_RELEASE)\\\"
+
+define Build/Compile
+	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
+		$(KERNEL_MAKE_FLAGS) \
+		M="$(PKG_BUILD_DIR)/net/batman-adv" \
+		$(PKG_EXTRA_KCONFIG) \
+		EXTRA_CFLAGS="$(PKG_EXTRA_CFLAGS)" \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		modules
+endef
+
+define KernelPackage/batman-adv/install
+	$(CP) ./files/. $(1)/
+endef
+
+$(eval $(call KernelPackage,batman-adv))

feeds/ipq40xx/batman-adv/files/etc/uci-defaults/99-migrate-batadv_hardif

@@ -0,0 +1,97 @@
+#!/bin/sh
+
+# This UCI-Defaults script will split the batadv proto network interfaces
+# in batadv_hardif and batadv proto. The configuration options from
+# /etc/config/batman-adv will be moved to the latter.
+
+. /lib/functions.sh
+
+proto_batadv_to_batadv_hardif() {
+    local section="$1"
+    local proto
+    local mesh
+    local routing_algo
+
+    config_get proto "${section}" proto
+    config_get mesh "${section}" mesh
+    config_get routing_algo "${section}" routing_algo
+
+    if [ -z "$mesh" -o "${proto}" != "batadv" ]; then
+        continue
+    fi
+
+    uci set network."${section}".proto="batadv_hardif"
+    uci rename network."${section}".mesh="master"
+    uci delete network."${section}".routing_algo
+
+    # create new section or adjust existing one
+    uci set network."${mesh}"=interface
+    uci set network."${mesh}".proto=batadv
+    [ -n "${routing_algo}" ]  && uci set network."${mesh}".routing_algo="${routing_algo}"
+}
+
+mv_batadv_config_section() {
+    local section="$1"
+    local aggregated_ogms
+    local ap_isolation
+    local bonding
+    local bridge_loop_avoidance
+    local distributed_arp_table
+    local fragmentation
+    local gw_bandwidth
+    local gw_mode
+    local gw_sel_class
+    local hop_penalty
+    local isolation_mark
+    local log_level
+    local multicast_mode
+    local network_coding
+    local orig_interval
+
+    config_get aggregated_ogms "${section}" aggregated_ogms
+    config_get ap_isolation "${section}" ap_isolation
+    config_get bonding "${section}" bonding
+    config_get bridge_loop_avoidance "${section}" bridge_loop_avoidance
+    config_get distributed_arp_table "${section}" distributed_arp_table
+    config_get fragmentation "${section}" fragmentation
+    config_get gw_bandwidth "${section}" gw_bandwidth
+    config_get gw_mode "${section}" gw_mode
+    config_get gw_sel_class "${section}" gw_sel_class
+    config_get hop_penalty "${section}" hop_penalty
+    config_get isolation_mark "${section}" isolation_mark
+    config_get log_level "${section}" log_level
+    config_get multicast_mode "${section}" multicast_mode
+    config_get network_coding "${section}" network_coding
+    config_get orig_interval "${section}" orig_interval
+
+    # update section in case it exists
+    [ -n "${aggregated_ogms}" ]  && uci set network."${section}".aggregated_ogms="${aggregated_ogms}"
+    [ -n "${ap_isolation}" ]  && uci set network."${section}".ap_isolation="${ap_isolation}"
+    [ -n "${bonding}" ]  && uci set network."${section}".bonding="${bonding}"
+    [ -n "${bridge_loop_avoidance}" ]  && uci set network."${section}".bridge_loop_avoidance="${bridge_loop_avoidance}"
+    [ -n "${distributed_arp_table}" ]  && uci set network."${section}".distributed_arp_table="${distributed_arp_table}"
+    [ -n "${fragmentation}" ]  && uci set network."${section}".fragmentation="${fragmentation}"
+    [ -n "${gw_bandwidth}" ]  && uci set network."${section}".gw_bandwidth="${gw_bandwidth}"
+    [ -n "${gw_mode}" ]  && uci set network."${section}".gw_mode="${gw_mode}"
+    [ -n "${gw_sel_class}" ]  && uci set network."${section}".gw_sel_class="${gw_sel_class}"
+    [ -n "${hop_penalty}" ]  && uci set network."${section}".hop_penalty="${hop_penalty}"
+    [ -n "${isolation_mark}" ]  && uci set network."${section}".isolation_mark="${isolation_mark}"
+    [ -n "${log_level}" ]  && uci set network."${section}".log_level="${log_level}"
+    [ -n "${multicast_mode}" ]  && uci set network."${section}".multicast_mode="${multicast_mode}"
+    [ -n "${network_coding}" ]  && uci set network."${section}".network_coding="${network_coding}"
+    [ -n "${orig_interval}" ]  && uci set network."${section}".orig_interval="${orig_interval}"
+}
+
+if [ -f /etc/config/batman-adv ]; then
+    config_load network
+    config_foreach proto_batadv_to_batadv_hardif 'interface'
+    uci commit network
+
+    config_load batman-adv
+    config_foreach mv_batadv_config_section 'mesh'
+    uci commit network
+
+    rm -f /etc/config/batman-adv
+fi
+
+exit 0

feeds/ipq40xx/batman-adv/files/lib/netifd/proto/batadv.sh

@@ -0,0 +1,123 @@
+#!/bin/sh
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
+
+proto_batadv_init_config() {
+	no_device=1
+	available=1
+
+	proto_config_add_boolean 'aggregated_ogms:bool'
+	proto_config_add_boolean 'ap_isolation:bool'
+	proto_config_add_boolean 'bonding:bool'
+	proto_config_add_boolean 'bridge_loop_avoidance:bool'
+	proto_config_add_boolean 'distributed_arp_table:bool'
+	proto_config_add_boolean 'fragmentation:bool'
+	proto_config_add_string 'gw_bandwidth'
+	proto_config_add_string 'gw_mode'
+	proto_config_add_int 'gw_sel_class'
+	proto_config_add_int 'hop_penalty'
+	proto_config_add_string 'isolation_mark'
+	proto_config_add_string 'log_level'
+	proto_config_add_int 'multicast_fanout'
+	proto_config_add_boolean 'multicast_mode:bool'
+	proto_config_add_boolean 'network_coding:bool'
+	proto_config_add_int 'orig_interval'
+	proto_config_add_string 'routing_algo'
+}
+
+proto_batadv_setup() {
+	local config="$1"
+	local iface="$config"
+
+	local aggregated_ogms
+	local ap_isolation
+	local bonding
+	local bridge_loop_avoidance
+	local distributed_arp_table
+	local fragmentation
+	local gw_bandwidth
+	local gw_mode
+	local gw_sel_class
+	local hop_penalty
+	local isolation_mark
+	local log_level
+	local multicast_fanout
+	local multicast_mode
+	local network_coding
+	local orig_interval
+	local routing_algo
+
+	json_get_vars aggregated_ogms
+	json_get_vars ap_isolation
+	json_get_vars bonding
+	json_get_vars bridge_loop_avoidance
+	json_get_vars distributed_arp_table
+	json_get_vars fragmentation
+	json_get_vars gw_bandwidth
+	json_get_vars gw_mode
+	json_get_vars gw_sel_class
+	json_get_vars hop_penalty
+	json_get_vars isolation_mark
+	json_get_vars log_level
+	json_get_vars multicast_fanout
+	json_get_vars multicast_mode
+	json_get_vars network_coding
+	json_get_vars orig_interval
+	json_get_vars routing_algo
+
+	set_default routing_algo 'BATMAN_IV'
+
+	batctl routing_algo "$routing_algo"
+	batctl meshif "$iface" interface create
+
+	[ -n "$aggregated_ogms" ] && batctl meshif "$iface" aggregation "$aggregated_ogms"
+	[ -n "$ap_isolation" ] && batctl meshif "$iface" ap_isolation "$ap_isolation"
+	[ -n "$bonding" ] && batctl meshif "$iface" bonding "$bonding"
+	[ -n "$bridge_loop_avoidance" ] &&  batctl meshif "$iface" bridge_loop_avoidance "$bridge_loop_avoidance" 2>&-
+	[ -n "$distributed_arp_table" ] && batctl meshif "$iface" distributed_arp_table "$distributed_arp_table" 2>&-
+	[ -n "$fragmentation" ] && batctl meshif "$iface" fragmentation "$fragmentation"
+
+	case "$gw_mode" in
+	server)
+		if [ -n "$gw_bandwidth" ]; then
+			batctl meshif "$iface" gw_mode "server" "$gw_bandwidth"
+		else
+			batctl meshif "$iface" gw_mode "server"
+		fi
+		;;
+	client)
+		if [ -n "$gw_sel_class" ]; then
+			batctl meshif "$iface" gw_mode "client" "$gw_sel_class"
+		else
+			batctl meshif "$iface" gw_mode "client"
+		fi
+		;;
+	*)
+		batctl meshif "$iface" gw_mode "off"
+		;;
+	esac
+
+	[ -n "$hop_penalty" ] && batctl meshif "$iface" hop_penalty "$hop_penalty"
+	[ -n "$isolation_mark" ] && batctl meshif "$iface" isolation_mark "$isolation_mark"
+	[ -n "$multicast_fanout" ] && batctl meshif "$iface" multicast_fanout "$multicast_fanout"
+	[ -n "$multicast_mode" ] && batctl meshif "$iface" multicast_mode "$multicast_mode" 2>&-
+	[ -n "$network_coding" ] && batctl meshif "$iface" network_coding "$network_coding" 2>&-
+	[ -n "$log_level" ] && batctl meshif "$iface" loglevel "$log_level" 2>&-
+	[ -n "$orig_interval" ] && batctl meshif "$iface" orig_interval "$orig_interval"
+
+	proto_init_update "$iface" 1
+	proto_send_update "$config"
+}
+
+proto_batadv_teardown() {
+	local config="$1"
+	local iface="$config"
+
+	batctl meshif "$iface" interface destroy
+}
+
+add_protocol batadv

feeds/ipq40xx/batman-adv/files/lib/netifd/proto/batadv_hardif.sh

@@ -0,0 +1,49 @@
+#!/bin/sh
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
+
+proto_batadv_hardif_init_config() {
+	proto_config_add_int 'elp_interval'
+	proto_config_add_string "master"
+	proto_config_add_string 'throughput_override'
+}
+
+proto_batadv_hardif_setup() {
+	local config="$1"
+	local iface="$2"
+
+	local elp_interval
+	local master
+	local throughput_override
+
+	json_get_vars elp_interval
+	json_get_vars master
+	json_get_vars throughput_override
+
+	( proto_add_host_dependency "$config" '' "$master" )
+
+	batctl meshif "$master" interface -M add "$iface"
+
+	[ -n "$elp_interval" ] && batctl hardif "$iface" elp_interval "$elp_interval"
+	[ -n "$throughput_override" ] && batctl hardif "$iface" throughput_override "$throughput_override"
+
+	proto_init_update "$iface" 1
+	proto_send_update "$config"
+}
+
+proto_batadv_hardif_teardown() {
+	local config="$1"
+	local iface="$2"
+
+	local master
+
+	json_get_vars master
+
+	batctl meshif "$master" interface -M del "$iface" || true
+}
+
+add_protocol batadv_hardif

feeds/ipq40xx/batman-adv/files/lib/netifd/proto/batadv_vlan.sh

@@ -0,0 +1,25 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_batadv_vlan_init_config() {
+	proto_config_add_boolean 'ap_isolation:bool'
+}
+
+proto_batadv_vlan_setup() {
+	local config="$1"
+	local iface="$2"
+
+	# batadv_vlan options
+	local ap_isolation
+
+	json_get_vars ap_isolation
+
+	[ -n "$ap_isolation" ] && batctl vlan "$iface" ap_isolation "$ap_isolation"
+	proto_init_update "$iface" 1
+	proto_send_update "$config"
+}
+
+add_protocol batadv_vlan

feeds/ipq40xx/batman-adv/src/compat-hacks.h

@@ -0,0 +1,181 @@
+/* Please avoid adding hacks here - instead add it to mac80211/backports.git */
+
+#undef CONFIG_MODULE_STRIPPED
+
+#include <linux/version.h>	/* LINUX_VERSION_CODE */
+#include <linux/types.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+
+#include <linux/netdevice.h>
+
+#define netdev_master_upper_dev_link(dev, upper_dev, upper_priv, upper_info, extack) ({\
+	BUILD_BUG_ON(extack != NULL); \
+	netdev_master_upper_dev_link(dev, upper_dev, upper_priv, upper_info); \
+})
+
+#endif /* < KERNEL_VERSION(4, 15, 0) */
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 16, 0)
+
+#ifndef sizeof_field
+#define sizeof_field(TYPE, MEMBER) sizeof((((TYPE *)0)->MEMBER))
+#endif
+
+#endif /* < KERNEL_VERSION(4, 16, 0) */
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 1, 0)
+
+#include_next <linux/igmp.h>
+#include_next <net/addrconf.h>
+
+static inline int batadv_ipv6_mc_check_mld1(struct sk_buff *skb)
+{
+	return ipv6_mc_check_mld(skb, NULL);
+}
+
+static inline int batadv_ipv6_mc_check_mld2(struct sk_buff *skb,
+					    struct sk_buff **skb_trimmed)
+{
+	return ipv6_mc_check_mld(skb, skb_trimmed);
+}
+
+#define ipv6_mc_check_mld_get(_1, _2, ipv6_mc_check_mld_name, ...) ipv6_mc_check_mld_name
+#define ipv6_mc_check_mld(...) \
+	ipv6_mc_check_mld_get(__VA_ARGS__, batadv_ipv6_mc_check_mld2, batadv_ipv6_mc_check_mld1)(__VA_ARGS__)
+
+static inline int batadv_ip_mc_check_igmp1(struct sk_buff *skb)
+{
+	return ip_mc_check_igmp(skb, NULL);
+}
+
+static inline int batadv_ip_mc_check_igmp2(struct sk_buff *skb,
+					   struct sk_buff **skb_trimmed)
+{
+	return ip_mc_check_igmp(skb, skb_trimmed);
+}
+
+#define ip_mc_check_igmp_get(_1, _2, ip_mc_check_igmp_name, ...) ip_mc_check_igmp_name
+#define ip_mc_check_igmp(...) \
+	ip_mc_check_igmp_get(__VA_ARGS__, batadv_ip_mc_check_igmp2, batadv_ip_mc_check_igmp1)(__VA_ARGS__)
+
+#endif /* < KERNEL_VERSION(5, 1, 0) */
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 15, 0)
+
+#define batadv_softif_slave_add(__dev, __slave_dev, __extack) \
+	batadv_softif_slave_add(__dev, __slave_dev)
+
+#endif /* < KERNEL_VERSION(4, 15, 0) */
+
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 0, 0)
+
+static inline int batadv_access_ok(int type, const void __user *p,
+				   unsigned long size)
+{
+	return access_ok(type, p, size);
+}
+
+#ifdef access_ok
+#undef access_ok
+#endif
+
+#define access_ok_get(_1, _2, _3 , access_ok_name, ...) access_ok_name
+#define access_ok(...) \
+	access_ok_get(__VA_ARGS__, access_ok3, access_ok2)(__VA_ARGS__)
+
+#define access_ok2(addr, size)	batadv_access_ok(VERIFY_WRITE, (addr), (size))
+#define access_ok3(type, addr, size)	batadv_access_ok((type), (addr), (size))
+
+#endif /* < KERNEL_VERSION(5, 0, 0) */
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 4, 0)
+
+#ifndef fallthrough
+#if __GNUC__ > 7 && !defined(__CHECKER__)
+# define fallthrough                    __attribute__((__fallthrough__))
+#else
+# define fallthrough                    do {} while (0)  /* fallthrough */
+#endif
+#endif
+
+#endif /* < KERNEL_VERSION(5, 4, 0) */
+
+/* <DECLARE_EWMA> */
+
+#include <linux/version.h>
+#include_next <linux/average.h>
+
+#include <linux/bug.h>
+
+#ifdef DECLARE_EWMA
+#undef DECLARE_EWMA
+#endif /* DECLARE_EWMA */
+
+/*
+ * Exponentially weighted moving average (EWMA)
+ *
+ * This implements a fixed-precision EWMA algorithm, with both the
+ * precision and fall-off coefficient determined at compile-time
+ * and built into the generated helper funtions.
+ *
+ * The first argument to the macro is the name that will be used
+ * for the struct and helper functions.
+ *
+ * The second argument, the precision, expresses how many bits are
+ * used for the fractional part of the fixed-precision values.
+ *
+ * The third argument, the weight reciprocal, determines how the
+ * new values will be weighed vs. the old state, new values will
+ * get weight 1/weight_rcp and old values 1-1/weight_rcp. Note
+ * that this parameter must be a power of two for efficiency.
+ */
+
+#define DECLARE_EWMA(name, _precision, _weight_rcp)			\
+	struct ewma_##name {						\
+		unsigned long internal;					\
+	};								\
+	static inline void ewma_##name##_init(struct ewma_##name *e)	\
+	{								\
+		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
+		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
+		/*							\
+		 * Even if you want to feed it just 0/1 you should have	\
+		 * some bits for the non-fractional part...		\
+		 */							\
+		BUILD_BUG_ON((_precision) > 30);			\
+		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
+		e->internal = 0;					\
+	}								\
+	static inline unsigned long					\
+	ewma_##name##_read(struct ewma_##name *e)			\
+	{								\
+		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
+		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
+		BUILD_BUG_ON((_precision) > 30);			\
+		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
+		return e->internal >> (_precision);			\
+	}								\
+	static inline void ewma_##name##_add(struct ewma_##name *e,	\
+					     unsigned long val)		\
+	{								\
+		unsigned long internal = READ_ONCE(e->internal);	\
+		unsigned long weight_rcp = ilog2(_weight_rcp);		\
+		unsigned long precision = _precision;			\
+									\
+		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
+		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
+		BUILD_BUG_ON((_precision) > 30);			\
+		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
+									\
+		WRITE_ONCE(e->internal, internal ?			\
+			(((internal << weight_rcp) - internal) +	\
+				(val << precision)) >> weight_rcp :	\
+			(val << precision));				\
+	}
+
+/* </DECLARE_EWMA> */

feeds/ipq40xx/ipq-wifi/Makefile

@@ -0,0 +1,151 @@
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/version.mk
+
+PKG_NAME:=ipq-wifi
+PKG_RELEASE:=1
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/package.mk
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile
+endef
+
+# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
+# to generate the board-* files here.
+#
+# This is intended to be used on an interim basis until device-specific
+# board data for new devices is available through the upstream compilation
+#
+# Please send a mail with your device-specific board files upstream.
+# You can find instructions and examples on the linux-wireless wiki:
+# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
+
+ALLWIFIBOARDS:= \
+	8dev_habanero-dvk \
+	aruba_ap-303 \
+	avm_fritzrepeater-1200 \
+	buffalo_wtr-m2133hp \
+	cellc_rtl30vw \
+	devolo_magic-2-wifi-next \
+	dlink_dap2610 \
+	edgecore_ecw5410 \
+	edgecore_ssw2ac2600 \
+	edgecore_oap100 \
+	engenius_eap2200 \
+	engenius_emd1 \
+	engenius_emr3500 \
+	ezviz_cs-w3-wd1200g-eup \
+	glinet_gl-ap1300 \
+	glinet_gl-s1300 \
+	linksys_ea8300 \
+	linksys_mr8300-v0 \
+	luma_wrtq-329acn \
+	mikrotik_hap-ac2 \
+	mikrotik_sxtsq-5-ac \
+	mobipromo_cm520-79f \
+	nec_wg2600hp3 \
+	plasmacloud_pa1200 \
+	plasmacloud_pa2200 \
+	qxwlan_e2600ac \
+	cig_wf610d \
+	wallys_dr40x9 \
+	tp-link_ec420-g1 \
+	udaya-a5-id2 \
+	hfcl_ion4
+
+ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
+
+define Package/ipq-wifi-default
+  SUBMENU:=ath10k Board-Specific Overrides
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
+  TITLE:=Custom Board
+endef
+
+define ipq-wifi-install-one-to
+  $(INSTALL_DIR)  $(2)/lib/firmware/ath10k/$(3)/
+  $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
+endef
+
+define ipq-wifi-install-one
+  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
+  $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
+  $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+    $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
+  )))
+
+endef
+# Blank line required at end of above define due to foreach context
+
+define generate-ipq-wifi-package
+  define Package/ipq-wifi-$(1)
+    $(call Package/ipq-wifi-default)
+    TITLE:=board-2.bin Overrides for $(2)
+    CONFLICTS:=$(PREV_BOARD)
+  endef
+
+  define Package/ipq-wifi-$(1)/description
+The $(2) requires board-specific, reference ("cal") data
+that is not yet present in the upstream wireless firmware distribution.
+
+This package supplies board-2.bin file(s) that, in the interim,
+overwrite those supplied by the ath10k-firmware-* packages.
+
+This is package is only necessary for the $(2).
+
+Do not install it for any other device!
+  endef
+
+  define Package/ipq-wifi-$(1)/install-overlay
+    $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
+      $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
+  endef
+
+  PREV_BOARD+=ipq-wifi-$(1)
+endef
+
+# Add board name to ALLWIFIBOARDS
+# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
+# Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
+
+$(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK))
+$(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
+$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
+$(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
+$(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
+$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
+$(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
+$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
+$(eval $(call generate-ipq-wifi-package,edgecore_ssw2ac2600,Edgecore SSW2AC2600))
+$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
+$(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
+$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
+$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
+$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
+$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
+$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
+$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
+$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
+$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
+$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
+$(eval $(call generate-ipq-wifi-package,cig_wf610d,CIG WF_610D))
+$(eval $(call generate-ipq-wifi-package,tp-link_ec420-g1,tp-link EC420-G1))
+$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
+$(eval $(call generate-ipq-wifi-package,hfcl_ion4,HFCL ION4))
+$(eval $(call generate-ipq-wifi-package,udaya-a5-id2,udaya A5 ID2))
+
+$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

feeds/ipq40xx/ipq40xx/Makefile

@@ -0,0 +1,25 @@
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=ipq40xx
+BOARDNAME:=Qualcomm Atheros IPQ40XX
+FEATURES:=squashfs fpu ramdisk nand
+CPU_TYPE:=cortex-a7
+CPU_SUBTYPE:=neon-vfpv4
+SUBTARGETS:=generic mikrotik
+
+KERNEL_PATCHVER:=5.4
+KERNEL_TESTING_PATCHVER:=5.4
+DEVICE_TYPE:=qsdk
+
+KERNELNAME:=zImage Image dtbs
+
+include $(INCLUDE_DIR)/target.mk
+DEFAULT_PACKAGES += \
+	kmod-usb-dwc3-qcom \
+	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
+	kmod-ath10k-ct wpad-basic-wolfssl \
+	kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \
+	uboot-envtools
+
+$(eval $(call BuildTarget))

feeds/ipq40xx/ipq40xx/base-files/etc/board.d/01_leds

@@ -0,0 +1,91 @@
+#!/bin/sh
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+alfa-network,ap120c-ac)
+	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
+	;;
+asus,rt-ac58u)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
+	;;
+avm,fritzbox-4040)
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
+	;;
+avm,fritzbox-7530 |\
+glinet,gl-b1300)
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
+	;;
+edgecore,oap100 |\
+edgecore,oap100e)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
+	;;
+
+engenius,eap1300)
+	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
+	ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
+	;;
+engenius,eap2200)
+	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
+	;;
+engenius,ens620ext)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
+	;;
+mikrotik,sxtsq-5-ac)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
+	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
+	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
+	;;
+mobipromo,cm520-79f)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
+	;;
+netgear,ex6100v2 |\
+netgear,ex6150v2)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
+	;;
+qxwlan,e2600ac-c1 |\
+qxwlan,e2600ac-c2)
+	ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
+	;;
+edgecore,ecw5211 |\
+edgecore,spw2ac1200 |\
+edgecore,spw2ac1200-lan-poe |\
+cig,wf610d |\
+zyxel,nbg6617 |\
+zyxel,wre6606)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	;;
+hfcl,ion4)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "yellow:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "red:wlan5g" "phy1tpt"
+	;;
+esac
+
+board_config_flush
+
+exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/board.d/02_network

@@ -0,0 +1,211 @@
+#!/bin/sh
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq40xx_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	8dev,habanero-dvk|\
+	8dev,jalapeno|\
+	alfa-network,ap120c-ac|\
+	edgecore,spw2ac1200-lan-poe |\
+	engenius,emr3500|\
+	engenius,ens620ext|\
+	luma,wrtq-329acn|\
+	plasmacloud,pa1200|\
+	plasmacloud,pa2200|\
+	wallys,dr40x9)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+	aruba,ap-303|\
+	aruba,ap-365|\
+	avm,fritzrepeater-1200|\
+	dlink,dap-2610 |\
+	engenius,eap1300|\
+	engenius,emd1|\
+	meraki,mr33|\
+	mikrotik,sxtsq-5-ac|\
+	netgear,ex6100v2|\
+	netgear,ex6150v2|\
+	tp-link,ec420-g1|\
+	hfcl,ion4|\
+	zyxel,wre6606)
+		ucidef_set_interface_wan "eth0"
+		;;
+	aruba,ap-303h)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
+		;;
+	asus,map-ac2200|\
+	cilab,meshpoint-one|\
+	cig,wf610d|\
+	edgecore,ecw5211|\
+	edgecore,spw2ac1200 |\
+	edgecore,oap100|\
+	edgecore,oap100e|\
+	udaya,a5-id2|\
+	openmesh,a42|\
+	openmesh,a62)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		;;
+	asus,rt-ac58u|\
+	mikrotik,hap-ac2|\
+	zyxel,nbg6617)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	avm,fritzbox-4040|\
+	linksys,ea6350v3|\
+	linksys,ea8300|\
+	linksys,mr8300)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
+	avm,fritzbox-7530)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
+	avm,fritzrepeater-3000)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "4:lan:1" "5:lan:2"
+		;;
+	compex,wpj419|\
+	compex,wpj428|\
+	engenius,eap2200)
+		ucidef_set_interface_lan "eth0 eth1"
+		;;
+	buffalo,wtr-m2133hp)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	cellc,rtl30vw)
+		ucidef_set_interface_lan "eth0"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "3:lan" "4:lan"
+		;;
+	devolo,magic-2-wifi-next)
+		ucidef_set_interface_lan "eth0 eth1 eth2"
+		;;
+	ezviz,cs-w3-wd1200g-eup)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
+		;;
+	glinet,gl-ap1300 |\
+	glinet,gl-b1300 |\
+	glinet,gl-s1300)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "3:lan" "4:lan"
+		;;
+	mobipromo,cm520-79f)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "3:lan:2" "4:lan:1"
+		ucidef_set_interface_wan "eth1"
+		;;
+	qxwlan,e2600ac-c1 |\
+	qxwlan,e2600ac-c2)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
+		;;
+	unielec,u4019-32m)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+		;;
+	um-325ac |\
+	um-510ac-v3 |\
+	um-550ac) 
+		ucidef_set_interface_wan "eth0"
+		ucidef_set_interface_lan "eth1"
+		;;
+	*)
+		echo "Unsupported hardware. Network interfaces not initialized"
+		;;
+	esac
+}
+
+ipq40xx_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case "$board" in
+	8dev,habanero-dvk)
+		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
+		;;
+	asus,rt-ac58u)
+		CI_UBIPART=UBI_DEV
+		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
+		label_mac=$wan_mac
+		;;
+	cilab,meshpoint-one)
+		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
+		;;
+	devolo,magic-2-wifi-next)
+		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
+		label_mac=$lan_mac
+		;;
+	dlink,dap-2610)
+		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
+		label_mac=$lan_mac
+		;;
+	engenius,eap2200|\
+	engenius,emd1)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$lan_mac
+		;;
+	engenius,emr3500)
+		wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$wan_mac
+		;;
+	engenius,ens620ext)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	ezviz,cs-w3-wd1200g-eup)
+		label_mac=$(mtd_get_mac_binary "ART" 0x6)
+		;;
+	linksys,ea6350v3)
+		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	mikrotik,hap-ac2)
+		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		lan_mac=$(macaddr_add $wan_mac 1)
+		label_mac="$wan_mac"
+		;;
+	mikrotik,sxtsq-5-ac)
+		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		label_mac="$lan_mac"
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ipq40xx_setup_interfaces $board
+ipq40xx_setup_macs $board
+board_config_flush
+
+exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+cellc,rtl30vw)
+	ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1"
+	ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1"
+	ucidef_add_gpio_switch "mcpie_vcc" "LTE power" "400" "0"
+	ucidef_add_gpio_switch "usb_vcc" "USB power" "401" "0"
+	;;
+cilab,meshpoint-one)
+	ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "413" "1"
+	;;
+compex,wpj428)
+	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
+	;;
+wallys,dr40x9)
+	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "423" "0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -0,0 +1,315 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:01:00.0.bin")
+	case "$board" in
+	meraki,mr33)
+		caldata_extract_ubi "ART" 0x9000 0x844
+		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
+		;;
+	esac
+	;;
+"ath10k/pre-cal-pci-0000:01:00.0.bin")
+	case "$board" in
+	asus,map-ac2200)
+		caldata_extract_ubi "Factory" 0x9000 0x2f20
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	buffalo,wtr-m2133hp)
+		caldata_extract "ART" 0x9000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
+		;;
+	engenius,eap2200 |\
+	openmesh,a62 |\
+	plasmacloud,pa2200)
+		caldata_extract "0:ART" 0x9000 0x2f20
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x9000 0x2f20
+		# OEM assigns 4 sequential MACs
+		ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+		;;
+	tp-link,ec420-g1)
+		caldata_extract "0:ART" 0x9000 0x2f20
+		;;
+	esac
+	;;
+"ath10k/pre-cal-ahb-a000000.wifi.bin")
+	case "$board" in
+	8dev,habanero-dvk |\
+	8dev,jalapeno |\
+	alfa-network,ap120c-ac |\
+	cilab,meshpoint-one |\
+	ezviz,cs-w3-wd1200g-eup |\
+	glinet,gl-ap1300 |\
+	glinet,gl-b1300 |\
+	glinet,gl-s1300 |\
+	linksys,ea6350v3 |\
+	mobipromo,cm520-79f |\
+	udaya,a5-id2 |\
+	qcom,ap-dk01.1-c1)
+		caldata_extract "ART" 0x1000 0x2f20
+		;;
+	aruba,ap-303 |\
+	aruba,ap-303h |\
+	aruba,ap-365)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
+		;;
+	asus,map-ac2200)
+		caldata_extract_ubi "Factory" 0x1000 0x2f20
+		;;
+	asus,rt-ac58u)
+		CI_UBIPART=UBI_DEV
+		caldata_extract_ubi "Factory" 0x1000 0x2f20
+		;;
+	avm,fritzbox-4040)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+		;;
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	buffalo,wtr-m2133hp)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
+		;;
+	cig,wf610d)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +2)
+		;;
+	cellc,rtl30vw |\
+	compex,wpj419 |\
+	compex,wpj428 |\
+	edgecore,ecw5211 |\
+	edgecore,spw2ac1200 |\
+	edgecore,spw2ac1200-lan-poe |\
+	edgecore,oap100 |\
+	edgecore,oap100e |\
+	engenius,eap1300 |\
+	engenius,eap2200 |\
+	luma,wrtq-329acn|\
+	openmesh,a42 |\
+	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200 |\
+	qxwlan,e2600ac-c1 |\
+	qxwlan,e2600ac-c2 |\
+	unielec,u4019-32m |\
+	wallys,dr40x9)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
+		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
+		;;
+	engenius,emd1)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
+		;;
+	engenius,emr3500)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		;;
+	engenius,ens620ext)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+		;;
+	meraki,mr33)
+		caldata_extract_ubi "ART" 0x1000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
+		;;
+	mikrotik,hap-ac2)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+		;;
+	netgear,ex6100v2 |\
+	netgear,ex6150v2)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
+		;;
+	zyxel,nbg6617 |\
+	zyxel,wre6606)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+		;;
+	tp-link,ec420-g1)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		;;
+	hfcl,ion4)
+		caldata_extract "0:ART" 4096 12064
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:ART WLAN0_BASEMAC)
+		;;
+	um-325ac |\
+	um-510ac-v3 |\
+	um-550ac) 
+		caldata_extract "ART" 0x1000 0x2f20
+		;;
+	esac
+	;;
+"ath10k/pre-cal-ahb-a800000.wifi.bin")
+	case "$board" in
+	8dev,habanero-dvk |\
+	8dev,jalapeno |\
+	alfa-network,ap120c-ac |\
+	cilab,meshpoint-one |\
+	ezviz,cs-w3-wd1200g-eup |\
+	glinet,gl-ap1300 |\
+	glinet,gl-b1300 |\
+	glinet,gl-s1300 |\
+	linksys,ea6350v3 |\
+	mobipromo,cm520-79f |\
+	udaya,a5-id2 |\
+	qcom,ap-dk01.1-c1)
+		caldata_extract "ART" 0x5000 0x2f20
+		;;
+	aruba,ap-303 |\
+	aruba,ap-303h |\
+	aruba,ap-365)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+		;;
+	asus,map-ac2200)
+		caldata_extract_ubi "Factory" 0x5000 0x2f20
+		;;
+	asus,rt-ac58u)
+		CI_UBIPART=UBI_DEV
+		caldata_extract_ubi "Factory" 0x5000 0x2f20
+		;;
+	avm,fritzbox-4040)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+		;;
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	buffalo,wtr-m2133hp)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
+		;;
+	cig,wf610d)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +3)
+		;;
+	cellc,rtl30vw |\
+	compex,wpj419 |\
+	compex,wpj428 |\
+	edgecore,ecw5211 |\
+	edgecore,spw2ac1200 |\
+	edgecore,spw2ac1200-lan-poe |\
+	edgecore,oap100 |\
+	edgecore,oap100e |\
+	engenius,eap1300 |\
+	engenius,eap2200 |\
+	luma,wrtq-329acn|\
+	openmesh,a42 |\
+	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200 |\
+	qxwlan,e2600ac-c1 |\
+	qxwlan,e2600ac-c2 |\
+	unielec,u4019-32m |\
+	wallys,dr40x9)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
+		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+		;;
+	engenius,emd1)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
+		;;
+	engenius,emr3500)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
+		;;
+	engenius,ens620ext)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+		;;
+	meraki,mr33)
+		caldata_extract_ubi "ART" 0x5000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
+		;;
+	mikrotik,hap-ac2|\
+	mikrotik,sxtsq-5-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+		;;
+	netgear,ex6100v2 |\
+	netgear,ex6150v2)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
+		;;
+	zyxel,nbg6617 |\
+	zyxel,wre6606)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+		;;
+	hfcl,ion4)
+		caldata_extract "0:ART" 20480 12064
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:ART WLAN1_BASEMAC)
+		;;
+	um-325ac |\
+	um-510ac-v3 |\
+	um-550ac) 
+		caldata_extract "ART" 0x5000 0x2f20
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

feeds/ipq40xx/ipq40xx/base-files/etc/hotplug.d/firmware/40-ct-fw-cfg

@@ -0,0 +1,32 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+
+fwcfg_symlink() {
+	local chip=$1
+	local path=$2
+
+	ln -s /lib/firmware/ath10k/fwcfg-${chip}.txt /lib/firmware/${FIRMWARE}
+}
+
+case "$FIRMWARE" in                                                         
+ath10k/fwcfg-ahb-a000000.wifi.txt|\
+ath10k/fwcfg-ahb-a800000.wifi.txt)
+	fwcfg_symlink ipq4019
+	
+	;;
+ath10k/fwcfg-pci-0000:01:00.0.txt)
+        case "$(board_name)" in
+        linksys,ea8300)
+                fwcfg_symlink qca9888
+                ;;
+	tp-link,ap2220|\
+	tp-link,ec420-g1)
+		fwcfg_symlink qca9984
+		;;
+	esac
+	;;
+esac
+
+exit 0

feeds/ipq40xx/ipq40xx/base-files/etc/hotplug.d/net/20-smp-tune

@@ -0,0 +1,67 @@
+#!/bin/sh
+[ "$ACTION" = add ] || exit
+
+NPROCS="$(grep -c "^processor.*:" /proc/cpuinfo)"
+[ "$NPROCS" -gt 1 ] || exit
+
+PROC_MASK="$(( (1 << $NPROCS) - 1 ))"
+
+find_irq_cpu() {
+	local dev="$1"
+	local match="$(grep -m 1 "$dev\$" /proc/interrupts)"
+	local cpu=0
+
+	[ -n "$match" ] && {
+		set -- $match
+		shift
+		for cur in `seq 1 $NPROCS`; do
+			[ "$1" -gt 0 ] && {
+				cpu=$(($cur - 1))
+				break
+			}
+			shift
+		done
+	}
+
+	echo "$cpu"
+}
+
+set_hex_val() {
+	local file="$1"
+	local val="$2"
+	val="$(printf %x "$val")"
+	[ -n "$DEBUG" ] && echo "$file = $val"
+	echo "$val" > "$file"
+}
+
+default_ps="$(uci get "network.@globals[0].default_ps")"
+[ -n "$default_ps" -a "$default_ps" != 1 ] && exit 0
+
+exec 512>/var/lock/smp_tune.lock
+flock 512 || exit 1
+
+for dev in /sys/class/net/*; do
+	[ -d "$dev" ] || continue
+
+	# ignore virtual interfaces
+	[ -n "$(ls "${dev}/" | grep '^lower_')" ] && continue
+	[ -d "${dev}/device" ] || continue
+
+	device="$(readlink "${dev}/device")"
+	device="$(basename "$device")"
+	irq_cpu="$(find_irq_cpu "$device")"
+	irq_cpu_mask="$((1 << $irq_cpu))"
+
+	for q in ${dev}/queues/rx-*; do
+		set_hex_val "$q/rps_cpus" "$(($PROC_MASK & ~$irq_cpu_mask))"
+	done
+
+	ntxq="$(ls -d ${dev}/queues/tx-* | wc -l)"
+
+	idx=$(($irq_cpu + 1))
+	for q in ${dev}/queues/tx-*; do
+		set_hex_val "$q/xps_cpus" "$((1 << $idx))"
+		let "idx = idx + 1"
+		[ "$idx" -ge "$NPROCS" ] && idx=0
+	done
+done

feeds/ipq40xx/ipq40xx/base-files/etc/init.d/bootcount

@@ -0,0 +1,36 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	alfa-network,ap120c-ac)
+		[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
+			echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
+		;;
+	linksys,ea6350v3|\
+	linksys,ea8300|\
+	linksys,mr8300)
+		mtd resetbc s_env || true
+		;;
+	edgecore,ecw5211)
+		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | cut -d " " -f1)"
+		case "$part" in
+		rootfs1|\
+		rootfs2)
+			avail=$(fw_printenv -n upgrade_available)
+			[ ${avail} -ne 1 ] && fw_setenv upgrade_available 1
+			fw_setenv bootcount 0
+			;;
+		esac
+		;;
+	edgecore,spw2ac1200|\
+	edgecore,spw2ac1200-lan-poe)
+		avail=$(fw_printenv -n upgrade_available)
+		[ ${avail} -eq 0 ] || {
+			fw_setenv upgrade_available 0
+			fw_setenv bootcount 0
+		}
+		;;
+	esac
+}

feeds/ipq40xx/ipq40xx/base-files/etc/inittab

@@ -0,0 +1,5 @@
+# Copyright (c) 2013 The Linux Foundation. All rights reserved.
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyMSM0::askfirst:/usr/libexec/login.sh
+ttyMSM1::askfirst:/usr/libexec/login.sh

feeds/ipq40xx/ipq40xx/base-files/etc/uci-defaults/04_led_migration

@@ -0,0 +1,19 @@
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+
+case "$board" in
+engenius,emr3500)
+	migrate_leds "emr3500:="
+	;;
+engenius,ens620ext|\
+zyxel,nbg6617)
+	migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
+	;;
+esac
+
+remove_devicename_leds
+
+migrations_apply system
+
+exit 0

feeds/ipq40xx/ipq40xx/base-files/lib/firmware/ath10k/fwcfg-ipq4019.txt

@@ -0,0 +1,15 @@
+vdevs = 8
+peers = 147
+active_peers = 147
+stations = 147
+rate_ctrl_objs = 7
+#regdom = 840
+#fwname = firmware-5-htt-mgt-b.bin
+#fwver = 5
+nohwcrypt = 0
+ct_sta_mode = 0
+tx_desc = 2000
+#max_nss = 3
+tids = 450
+skid_limit = 360
+max_amsdus = 3 

feeds/ipq40xx/ipq40xx/base-files/lib/firmware/ath10k/fwcfg-qca9888.txt

@@ -0,0 +1,16 @@
+# 9888 chip
+vdevs = 8
+peers = 202
+active_peers = 202
+stations = 202
+rate_ctrl_objs = 7
+#regdom = 840
+#fwname = firmware-5-htt-mgt-b.bin
+#fwver = 5
+nohwcrypt = 0
+ct_sta_mode = 0
+tx_desc = 2200
+#max_nss = 3
+tids = 450
+skid_limit = 360
+max_amsdus = 3 

feeds/ipq40xx/ipq40xx/base-files/lib/firmware/ath10k/fwcfg-qca9984.txt

@@ -0,0 +1,16 @@
+# 9984
+vdevs = 8
+peers = 180
+active_peers = 180
+stations = 180
+rate_ctrl_objs = 7
+#regdom = 840
+#fwname = firmware-5-htt-mgt-b.bin
+#fwver = 5
+nohwcrypt = 0
+ct_sta_mode = 0
+tx_desc = 2400
+#max_nss = 3
+tids = 450
+skid_limit = 360
+max_amsdus = 3 

feeds/ipq40xx/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh

@@ -0,0 +1,39 @@
+. /lib/functions.sh
+
+preinit_set_mac_address() {
+	case $(board_name) in
+	asus,map-ac2200)
+		base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
+		ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
+		;;
+	cig,wf610d)
+		base_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		ip link set eth0 address "${base_mac}"
+		;;
+	ezviz,cs-w3-wd1200g-eup)
+		ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6)
+		ip link set dev eth1 address $(mtd_get_mac_binary "ART" 0x0)
+		;;
+	engenius,eap2200)
+		base_mac=$(cat /sys/class/net/eth0/address)
+		ip link set dev eth1 address $(macaddr_add "${base_mac}" +1)
+		;;
+	linksys,ea8300|\
+	linksys,mr8300)
+		base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ip link set dev eth0 address "${base_mac}"
+		ip link set dev eth1 address $(macaddr_add "${base_mac}" 1)
+		;;
+	meraki,mr33)
+		mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
+		[ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"
+		;;
+	zyxel,nbg6617)
+		base_mac=$(cat /sys/class/net/eth0/address)
+		ip link set dev eth0 address $(macaddr_add "$base_mac" +2)
+		ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
+	esac
+}
+
+boot_hook_add preinit_main preinit_set_mac_address

feeds/ipq40xx/ipq40xx/base-files/lib/preinit/05_set_threading.sh

@@ -0,0 +1,7 @@
+. /lib/functions.sh
+
+preinit_set_threading() {
+	echo 1 > /sys/class/net/eth0/threaded
+}
+
+boot_hook_add preinit_main preinit_set_threading

feeds/ipq40xx/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh

@@ -0,0 +1,22 @@
+set_preinit_iface() {
+	. /lib/functions.sh
+
+	case $(board_name) in
+	aruba,ap-303| \
+	asus,rt-ac58u| \
+	avm,fritzbox-4040| \
+	ezviz,cs-w3-wd1200g-eup| \
+	glinet,gl-b1300| \
+	linksys,ea8300| \
+	linksys,mr8300| \
+	meraki,mr33| \
+	zyxel,nbg6617)
+		ifname=eth0
+		;;
+	devolo,magic-2-wifi-next)
+		ifname=eth1
+		;;
+	esac
+}
+
+boot_hook_add preinit_main set_preinit_iface

feeds/ipq40xx/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh

@@ -0,0 +1,108 @@
+# The U-Boot loader with the datachk patchset for dualbooting requires image
+# sizes and checksums to be provided in the U-Boot environment.
+# The devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
+
+platform_do_upgrade_dualboot_datachk() {
+	local tar_file="$1"
+	local restore_backup
+	local primary_kernel_mtd
+
+	local setenv_script="/tmp/fw_env_upgrade"
+
+	local kernel_mtd="$(find_mtd_index $PART_NAME)"
+	local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
+	local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
+
+	# detect to which flash region the new image is written to.
+	#
+	# 1. check what is the mtd index for the first flash region on this
+	#    device
+	# 2. check if the target partition ("inactive") has the mtd index of
+	#    the first flash region
+	#
+	#    - when it is: the new bootseq will be 1,2 and the first region is
+	#      modified
+	#    - when it isnt: bootseq will be 2,1 and the second region is
+	#      modified
+	#
+	# The detection has to be done via the hardcoded mtd partition because
+	# the current boot might be done with the fallback region. Let us
+	# assume that the current bootseq is 1,2. The bootloader detected that
+	# the image in flash region 1 is corrupt and thus switches to flash
+	# region 2. The bootseq in the u-boot-env is now still the same and
+	# the sysupgrade code can now only rely on the actual mtd indexes and
+	# not the bootseq variable to detect the currently booted flash
+	# region/image.
+	#
+	# In the above example, an implementation which uses bootseq ("1,2") to
+	# detect the currently booted image would assume that region 1 is booted
+	# and then overwrite the variables for the wrong flash region (aka the
+	# one which isn't modified). This could result in a device which doesn't
+	# boot anymore to Linux until it was reflashed with ap51-flash.
+	local next_boot_part="1"
+	case "$(board_name)" in
+	plasmacloud,pa1200|\
+	openmesh,a42)
+		primary_kernel_mtd=8
+		;;
+	plasmacloud,pa2200|\
+	openmesh,a62)
+		primary_kernel_mtd=10
+		;;
+	*)
+		echo "failed to detect primary kernel mtd partition for board"
+		return 1
+		;;
+	esac
+	[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
+	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+	# rootfs without EOF marker
+	rootfs_length=$((rootfs_length-4))
+
+	local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
+	# md5 checksum of rootfs with EOF marker
+	local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
+
+	#
+	# add tar support to get_image() to use default_do_upgrade() instead?
+	#
+
+	# take care of restoring a saved config
+	[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
+
+	mtd -q erase inactive
+	tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
+	tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
+
+	# prepare new u-boot env
+	if [ "$next_boot_part" = "1" ]; then
+		echo "bootseq 1,2" > $setenv_script
+	else
+		echo "bootseq 2,1" > $setenv_script
+	fi
+
+	printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
+	printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
+	printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
+	printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
+
+	printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
+	printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
+	printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
+	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
+
+	# store u-boot env changes
+	mkdir -p /var/lock
+	fw_setenv -s $setenv_script || {
+		echo "failed to update U-Boot environment"
+		return 1
+	}
+}

feeds/ipq40xx/ipq40xx/base-files/lib/upgrade/linksys.sh

@@ -0,0 +1,122 @@
+linksys_get_target_firmware() {
+	local cur_boot_part mtd_ubi0
+
+	cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
+	if [ -z "${cur_boot_part}" ]; then
+		mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+		case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
+		kernel|rootfs)
+			cur_boot_part=1
+			;;
+		alt_kernel|alt_rootfs)
+			cur_boot_part=2
+			;;
+		esac
+		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+			"${cur_boot_part}" "${mtd_ubi0}"
+	fi
+
+	# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
+	#  if test $auto_recovery = no;
+	#      then bootipq;
+	#  elif test $boot_part = 1;
+	#      then run bootpart1;
+	#      else run bootpart2;
+	#  fi
+
+	case "$cur_boot_part" in
+	1)
+		fw_setenv -s - <<-EOF
+			boot_part 2
+			auto_recovery yes
+		EOF
+		printf "alt_kernel"
+		return
+		;;
+	2)
+		fw_setenv -s - <<-EOF
+			boot_part 1
+			auto_recovery yes
+		EOF
+		printf "kernel"
+		return
+		;;
+	*)
+		return
+		;;
+	esac
+}
+
+linksys_get_root_magic() {
+	(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
+}
+
+platform_do_upgrade_linksys() {
+	local magic_long="$(get_magic_long "$1")"
+
+	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
+	local vol
+
+	mkdir -p /var/lock
+	local part_label="$(linksys_get_target_firmware)"
+	touch /var/lock/fw_printenv.lock
+
+	if [ -z "$part_label" ]; then
+		echo "cannot find target partition"
+		exit 1
+	fi
+
+	local target_mtd=$(find_mtd_part "$part_label")
+
+	[ "$magic_long" = "73797375" ] && {
+		CI_KERNPART="$part_label"
+		if [ "$part_label" = "kernel" ]; then
+			CI_UBIPART="rootfs"
+		else
+			CI_UBIPART="alt_rootfs"
+		fi
+
+		local mtdnum="$(find_mtd_index "$CI_UBIPART")"
+		if [ ! "$mtdnum" ]; then
+			echo "cannot find ubi mtd partition $CI_UBIPART"
+			return 1
+		fi
+
+		local ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		if [ ! "$ubidev" ]; then
+			ubiattach -m "$mtdnum"
+			sync
+			ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		fi
+
+		if [ "$ubidev" ]; then
+			for vol in $rm_oem_fw_vols; do
+				ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
+			done
+		fi
+
+		# complete std upgrade
+		nand_upgrade_tar "$1"
+	}
+
+	[ "$magic_long" = "27051956" ] && {
+		# This magic is for a uImage (which is a sysupgrade image)
+		# check firmwares' rootfs types
+		local oldroot="$(linksys_get_root_magic "$target_mtd")"
+		local newroot="$(linksys_get_root_magic "$1")"
+
+		if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
+			# we're upgrading from a firmware with UBI to one with UBI
+			# erase everything to be safe
+			# - Is that really needed? Won't remove (or comment) the if,
+			#   because it may be needed in a future device.
+			#mtd erase $part_label
+			#get_image "$1" | mtd -n write - $part_label
+			echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
+			get_image "$1" | mtd write - "$part_label"
+		else
+			echo "writing \"$1\" image to \"$part_label\""
+			get_image "$1" | mtd write - "$part_label"
+		fi
+	}
+}

feeds/ipq40xx/ipq40xx/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,160 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+platform_check_image() {
+	case "$(board_name)" in
+	asus,rt-ac58u)
+		CI_UBIPART="UBI_DEV"
+		local ubidev=$(nand_find_ubi $CI_UBIPART)
+		local asus_root=$(nand_find_volume $ubidev jffs2)
+
+		[ -n "$asus_root" ] || return 0
+
+		cat << EOF
+jffs2 partition is still present.
+There's probably no space left
+to install the filesystem.
+
+You need to delete the jffs2 partition first:
+# ubirmvol /dev/ubi0 --name=jffs2
+
+Once this is done. Retry.
+EOF
+		return 1
+		;;
+	esac
+	return 0;
+}
+
+askey_do_upgrade() {
+	local tar_file="$1"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+
+	nand_do_upgrade "$1"
+}
+
+zyxel_do_upgrade() {
+	local tar_file="$1"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
+
+	if [ -n "$UPGRADE_BACKUP" ]; then
+		tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
+	else
+		tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+	fi
+}
+
+platform_do_upgrade() {
+	case "$(board_name)" in
+	8dev,jalapeno |\
+	aruba,ap-303 |\
+	aruba,ap-303h |\
+	aruba,ap-365 |\
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000 |\
+	buffalo,wtr-m2133hp |\
+	cilab,meshpoint-one |\
+	edgecore,oap100 |\
+	edgecore,oap100e |\
+	engenius,eap2200 |\
+	glinet,gl-ap1300 |\
+	luma,wrtq-329acn |\
+	mobipromo,cm520-79f |\
+	qxwlan,e2600ac-c2 |\
+	wallys,dr40x9 |\
+	hfcl,ion4 |\
+	tp-link,ec420-g1)
+		nand_do_upgrade "$1"
+		;;
+	edgecore,ecw5211)
+		mkdir -p /var/lock/
+		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | cut -d " " -f 1)"
+		case "$part" in
+		rootfs1)
+			CI_UBIPART="rootfs2"
+			CI_FWSETENV="active 2"
+			;;
+		rootfs2)
+			CI_UBIPART="rootfs1"
+			CI_FWSETENV="active 1"
+			;;
+		*)
+			# legacy bootloader
+			;;
+		esac
+		nand_do_upgrade "$1"
+		;;
+	alfa-network,ap120c-ac)
+		mkdir -p /var/lock/
+		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
+		if [ "$part" = "rootfs1" ]; then
+			fw_setenv active 2 || exit 1
+			CI_UBIPART="rootfs2"
+		else
+			fw_setenv active 1 || exit 1
+			CI_UBIPART="rootfs1"
+		fi
+		nand_do_upgrade "$1"
+		;;
+	edgecore,spw2ac1200|\
+	edgecore,spw2ac1200-lan-poe)
+		CI_UBIPART="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
+		nand_do_upgrade "$1"
+		;;
+	asus,map-ac2200)
+		CI_KERNPART="linux"
+		nand_do_upgrade "$1"
+		;;
+	asus,rt-ac58u)
+		CI_UBIPART="UBI_DEV"
+		CI_KERNPART="linux"
+		nand_do_upgrade "$1"
+		;;
+	cellc,rtl30vw)
+		CI_UBIPART="ubifs"
+		askey_do_upgrade "$1"
+		;;
+	compex,wpj419)
+		nand_do_upgrade "$1"
+		;;
+	linksys,ea6350v3 |\
+	linksys,ea8300 |\
+	linksys,mr8300)
+		platform_do_upgrade_linksys "$1"
+		;;
+	meraki,mr33)
+		CI_KERNPART="part.safe"
+		nand_do_upgrade "$1"
+		;;
+	mikrotik,hap-ac2|\
+	mikrotik,sxtsq-5-ac)
+		[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
+		default_do_upgrade "$1"
+		;;
+	openmesh,a42 |\
+	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200)
+		PART_NAME="inactive"
+		platform_do_upgrade_dualboot_datachk "$1"
+		;;
+	zyxel,nbg6617)
+		zyxel_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}

feeds/ipq40xx/ipq40xx/config-5.4

@@ -0,0 +1,470 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
+CONFIG_AR40XX_PHY=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_IPQ40XX=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+# CONFIG_ARCH_MDM9615 is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_ARCH_MSM8960 is not set
+# CONFIG_ARCH_MSM8974 is not set
+# CONFIG_ARCH_MSM8X60 is not set
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
+# CONFIG_ARM_SMMU is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AT803X_PHY=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BCH=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOUNCE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_QCOM=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AES_ARM=y
+CONFIG_CRYPTO_AES_ARM_BS=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_QCE=y
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
+CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
+CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
+CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
+CONFIG_CRYPTO_DEV_QCOM_RNG=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MISC=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DTC=y
+CONFIG_DT_IDLE_STATES=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_ESSEDMA=y
+CONFIG_EXTCON=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OPTEE=y
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_QUP=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_IO_URING=y
+CONFIG_IPQ_GCC_4019=y
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_GCC_8074 is not set
+# CONFIG_IPQ_LCC_806X is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_KPSS_XCC is not set
+# CONFIG_KRAITCC is not set
+CONFIG_LEDS_LP5523=y
+CONFIG_LEDS_LP5562=y
+CONFIG_LEDS_LP55XX_COMMON=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_IPQ4019=y
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+CONFIG_MEMFD_CREATE=y
+# CONFIG_MFD_QCOM_RPM is not set
+# CONFIG_MFD_SPMI_PMIC is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MSM_GCC_8660 is not set
+# CONFIG_MSM_GCC_8916 is not set
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
+# CONFIG_MSM_GCC_8994 is not set
+# CONFIG_MSM_GCC_8996 is not set
+# CONFIG_MSM_GCC_8998 is not set
+# CONFIG_MSM_LCC_8960 is not set
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_MMCC_8974 is not set
+# CONFIG_MSM_MMCC_8996 is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_QCOM=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NLS=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OPTEE=y
+CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_DW_HOST=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+CONFIG_PHY_QCOM_IPQ4019_USB=y
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_PHY_QCOM_PCIE2 is not set
+# CONFIG_PHY_QCOM_QMP is not set
+# CONFIG_PHY_QCOM_QUSB2 is not set
+# CONFIG_PHY_QCOM_UFS is not set
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+CONFIG_PINCTRL_IPQ4019=y
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_IPQ8074 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8916 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MSM8994 is not set
+# CONFIG_PINCTRL_MSM8996 is not set
+# CONFIG_PINCTRL_MSM8998 is not set
+# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+# CONFIG_PINCTRL_QCS404 is not set
+# CONFIG_PINCTRL_SC7180 is not set
+# CONFIG_PINCTRL_SDM660 is not set
+# CONFIG_PINCTRL_SDM845 is not set
+# CONFIG_PINCTRL_SM8150 is not set
+CONFIG_PM_OPP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_QCA807X_PHY=y
+CONFIG_QCOM_A53PLL=y
+CONFIG_QCOM_BAM_DMA=y
+# CONFIG_QCOM_COMMAND_DB is not set
+# CONFIG_QCOM_EBI2 is not set
+# CONFIG_QCOM_GENI_SE is not set
+# CONFIG_QCOM_GSBI is not set
+# CONFIG_QCOM_HFPLL is not set
+# CONFIG_QCOM_IOMMU is not set
+# CONFIG_QCOM_LLCC is not set
+# CONFIG_QCOM_PDC is not set
+CONFIG_QCOM_PM=y
+CONFIG_QCOM_QFPROM=y
+# CONFIG_QCOM_RMTFS_MEM is not set
+CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SCM_32=y
+# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
+CONFIG_QCOM_SMEM=y
+# CONFIG_QCOM_SMSM is not set
+# CONFIG_QCOM_SOCINFO is not set
+CONFIG_QCOM_TCSR=y
+# CONFIG_QCOM_TSENS is not set
+CONFIG_QCOM_WDT=y
+# CONFIG_QCS_GCC_404 is not set
+# CONFIG_QCS_TURING_404 is not set
+# CONFIG_QRTR is not set
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=21
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_QCOM_SPMI is not set
+CONFIG_REGULATOR_VCTRL=y
+CONFIG_REGULATOR_VQMMC_IPQ4019=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_QCOM_AOSS is not set
+# CONFIG_RESET_QCOM_PDC is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+# CONFIG_SDM_CAMCC_845 is not set
+# CONFIG_SDM_DISPCC_845 is not set
+# CONFIG_SDM_GCC_660 is not set
+# CONFIG_SDM_GCC_845 is not set
+# CONFIG_SDM_GPUCC_845 is not set
+# CONFIG_SDM_LPASSCC_845 is not set
+# CONFIG_SDM_VIDEOCC_845 is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+# CONFIG_SM_GCC_8150 is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_QUP=y
+CONFIG_SPMI=y
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_SPMI_PMIC_CLKDIV is not set
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TEE=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UBIFS_FS_ZSTD=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts

@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: ISC
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "OpenMesh A42";
+	compatible = "openmesh,a42";
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@194b000 {
+			/* select hostmode */
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2: usb2@60f8800 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_green;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_green;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_red {
+			label = "red:status";
+			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_green: status_green {
+			label = "green:status";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		status_blue {
+			label = "blue:status";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	watchdog {
+		compatible = "linux,wdt-gpio";
+		gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+		hw_algo = "toggle";
+		/* hw_margin_ms is actually 300s but driver limits it to 60s */
+		hw_margin_ms = <60000>;
+		always-running;
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		/* partitions are passed via bootloader */
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&gmac0 {
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	qcom,forced_speed = <1000>;
+	qcom,forced_duplex = <1>;
+	vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+	qcom,phy_mdio_addr = <3>;
+	qcom,poll_required = <1>;
+	qcom,forced_speed = <1000>;
+	qcom,forced_duplex = <1>;
+	vlan_tag = <1 0x10>;
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "OM-A42";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "OM-A42";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts

@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "ALFA Network AP120C-AC";
+	compatible = "alfa-network,ap120c-ac";
+
+	aliases {
+		led-boot = &status;
+		led-failsafe = &status;
+		led-running = &status;
+		led-upgrade = &status;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status: status {
+			label = "blue:status";
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		wan {
+			label = "amber:wan";
+			gpios = <&ethphy4 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5g {
+			label = "red:wlan5g";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		counter@4a1000 {
+			compatible = "qcom,qca-gcnt";
+			reg = <0x4a1000 0x4>;
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2@60f8800 {
+			status = "okay";
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+
+			dwc3@8a00000 {
+				phys = <&usb3_hs_phy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+
+			switch_lan_bmp = <0x10>;
+			switch_wan_bmp = <0x20>;
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	tpm@29 {
+		compatible = "atmel,at97sc3204t";
+		reg = <0x29>;
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+		   <&tlmm  4 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "APPSBLENV";
+				reg = <0x000e0000 0x00010000>;
+			};
+
+			partition@f0000 {
+				label = "APPSBL";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "priv_data1";
+				reg = <0x00180000 0x00010000>;
+				read-only;
+			};
+
+			partition@190000 {
+				label = "priv_data2";
+				reg = <0x00190000 0x00010000>;
+				read-only;
+			};
+		};
+	};
+
+	nand@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "rootfs1";
+				reg = <0x00000000 0x04000000>;
+			};
+
+			partition@4000000 {
+				label = "rootfs2";
+				reg = <0x04000000 0x04000000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial0_pins>;
+	pinctrl-names = "default";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&ethphy4 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+&gmac0 {
+	qcom,forced_duplex = <1>;
+	qcom,forced_speed = <1000>;
+	qcom,phy_mdio_addr = <3>;
+	qcom,poll_required = <1>;
+	vlan_tag = <1 0x10>;
+};
+
+&gmac1 {
+	qcom,forced_duplex = <1>;
+	qcom,forced_speed = <1000>;
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	vlan_tag = <2 0x20>;
+};
+
+&tlmm {
+	i2c0_pins: i2c0_pinmux {
+		mux_i2c {
+			function = "blsp_i2c0";
+			pins = "gpio58", "gpio59";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_mdio {
+			pins = "gpio53";
+			function = "mdio";
+			bias-pull-up;
+		};
+
+		mux_mdc {
+			pins = "gpio52";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	serial0_pins: serial0_pinmux {
+		mux_uart {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0_pinmux {
+		mux_spi {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio4";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts

@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "EZVIZ CS-W3-WD1200G EUP";
+	compatible = "ezviz,cs-w3-wd1200g-eup";
+
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_green;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+			reset-delay-us = <5000>;
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: status_red {
+			label = "red:status";
+			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led_status_green: status_green {
+			label = "green:status";
+			gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led_status_blue: status_blue {
+			label = "blue:status";
+			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_1 {
+			pins = "gpio53";
+			function = "mdio";
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio52";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition1@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition2@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition3@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition4@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition5@E0000 {
+				label = "APPSBLENV";
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+
+			partition6@F0000 {
+				label = "APPSBL";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition7@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+
+			partition9@580000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x00180000 0x00e80000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts

@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "D-Link DAP 2610";
+	compatible = "dlink,dap-2610";
+
+	aliases {
+		led-boot = &led_red;
+		led-failsafe = &led_red;
+		led-running = &led_green;
+		led-upgrade = &led_red;
+	};
+
+	soc {
+		edma@c080000 {
+			qcom,num_gmac = <1>;
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		rng@22000 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+			switch_lan_bmp = <0x20>;
+			switch_wan_bmp = <0x00>;
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_red: red {
+			label = "red:power";
+			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led_green: green {
+			label = "green:power";
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fixed-partitions";
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x40000 0x20000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x60000 0x60000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "CDT";
+				reg = <0xc0000 0x10000>;
+				read-only;
+			};
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0xd0000 0x10000>;
+				read-only;
+			};
+			partition@e0000 {
+				label = "APPSBLENV";
+				reg = <0xe0000 0x10000>;
+				read-only;
+			};
+			partition@f0000 {
+				label = "APPSBL";
+				reg = <0xf0000 0x80000>;
+				read-only;
+			};
+			partition@170000 {
+				label = "ART";
+				reg = <0x170000 0x10000>;
+				read-only;
+			};
+			partition@180000 {
+				compatible = "wrg";
+				label = "firmware";
+				reg = <0x180000 0xdc0000>;
+			};
+			partition@fb0000 {
+				label = "rgbd";
+				reg = <0xfb0000 0x10000>;
+				read-only;
+			};
+			partition@fc0000 {
+				label = "bdcfg";
+				reg = <0xfc0000 0x10000>;
+				read-only;
+			};
+			partition@fd0000 {
+				label = "langpack";
+				reg = <0xfd0000 0x20000>;
+				read-only;
+			};
+			partition@ff0000 {
+				label = "certificate";
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+			partition@f40000 {
+				label = "captival";
+				reg = <0xf40000 0x70000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&gmac0 {
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	qcom,forced_speed = <1000>;
+	qcom,forced_duplex = <1>;
+	vlan_tag = <1 0x20>;
+};
+
+&mdio {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		mux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "dlink,dap-2610";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "dlink,dap-2610";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts

@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Linksys EA6350v3";
+	compatible = "linksys,ea6350v3";
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2@60f8800 {
+			status = "okay";
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power: status {
+			label = "green:status";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
+};
+
+
+&blsp_dma {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		mux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio59";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			SBL1@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			MBIB@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			QSEE@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			CDT@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			APPSBLENV@d0000 {
+				label = "APPSBLENV";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			APPSBL@e0000 {
+				label = "APPSBL"; /* uboot */
+				reg = <0x000e0000 0x00080000>;
+				read-only;
+			};
+			ART@160000 {
+				label = "ART";
+				reg = <0x00160000 0x00010000>;
+				read-only;
+			};
+			u_env@170000 {
+				label = "u_env";
+				reg = <0x00170000 0x00020000>;
+			};
+			s_env@190000 {
+				label = "s_env";
+				reg = <0x00190000 0x00020000>;
+			};
+			devinfo@1b0000 {
+				label = "devinfo";
+				reg = <0x001b0000 0x00010000>;
+			};
+			/* 0x001c0000 - 0x00200000 unused */
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			kernel@0 {
+				label = "kernel";
+				reg = <0x00000000 0x02800000>;
+			};
+			rootfs@300000 {
+				label = "rootfs";
+				reg = <0x00300000 0x02500000>;
+			};
+			alt_kernel@2800000 {
+				label = "alt_kernel";
+				reg = <0x02800000 0x02800000>;
+			};
+			alt_rootfs@2b00000 {
+				label = "alt_rootfs";
+				reg = <0x02b00000 0x02500000>;
+			};
+			sysdiag@5000000 {
+				label = "sysdiag";
+				reg = <0x05000000 0x00100000>;
+			};
+			syscfg@5100000 {
+				label = "syscfg";
+				reg = <0x05100000 0x02F00000>;
+			};
+			/* 0x00000000 - 0x08000000: 128 MiB */
+		};
+	};
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts

@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "EnGenius EAP1300";
+	compatible = "engenius,eap1300";
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power: orange {
+			label = "orange:power";
+			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			label = "blue:lan";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		mesh {
+			label = "blue:mesh";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "yellow:wlan5g";
+			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio54", "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition1@40000 {
+				label = "0:MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition2@60000 {
+				label = "0:QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition3@c0000 {
+				label = "0:CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition4@d0000 {
+				label = "0:DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition5@e0000 {
+				label = "0:APPSBLENV";
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition6@f0000 {
+				label = "0:APPSBL";
+				reg = <0x000f0000 0x00090000>;
+				read-only;
+			};
+			partition7@180000 {
+				label = "0:ART";
+				reg = <0x00180000 0x00010000>;
+				read-only;
+			};
+			partition8@190000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x190000 0x1dc0000>;
+			};
+			partition9@1f50000 {
+				label = "u-boot-env";
+				reg = <0x01f50000 0x00010000>;
+			};
+			partition10@1f60000 {
+				label = "userconfig";
+				reg = <0x01f60000 0x000a0000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&gmac0 {
+	vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+	vlan_tag = <1 0x10>;
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts

@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Edgecore ECW5211";
+	compatible = "edgecore,ecw5211";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		label-mac-device = &gmac0;
+	};
+
+	chosen {
+		bootargs-append = " root=/dev/ubiblock0_1";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "yellow:power";
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		counter@4a1000 {
+			compatible = "qcom,qca-gcnt";
+			reg = <0x4a1000 0x4>;
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2@60f8800 {
+			status = "okay";
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+
+			dwc3@8a00000 {
+				phys = <&usb3_hs_phy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+
+			switch_lan_bmp = <0x10>;
+			switch_wan_bmp = <0x20>;
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+};
+
+&tlmm {
+	mdio_pins: mdio_pinmux {
+		mux_mdio {
+			pins = "gpio53";
+			function = "mdio";
+			bias-pull-up;
+		};
+
+		mux_mdc {
+			pins = "gpio52";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio4";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	i2c0_pins: i2c0_pinmux {
+		mux_i2c {
+			function = "blsp_i2c0";
+			pins = "gpio58", "gpio59";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "0:MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "0:QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "0:CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition@d0000 {
+				label = "0:DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "0:APPSBLENV"; /* uboot env */
+				reg = <0x000e0000 0x00010000>;
+			};
+
+			partition@f0000 {
+				label = "0:APPSBL"; /* uboot */
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition@170000 {
+				label = "0:ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "rootfs";
+				reg = <0x00000000 0x04000000>;
+			};
+
+			partition@1 {
+				label = "rootfs1";
+				reg = <0x00000000 0x04000000>;
+			};
+
+			partition@4000000 {
+				label = "rootfs2";
+				reg = <0x04000000 0x04000000>;
+			};
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	tpm@29 {
+		compatible = "atmel,at97sc3204t";
+		reg = <0x29>;
+	};
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+};
+
+&gmac0 {
+	qcom,poll_required = <1>;
+	qcom,phy_mdio_addr = <4>;
+	vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+	qcom,poll_required = <1>;
+	qcom,phy_mdio_addr = <3>;
+	vlan_tag = <1 0x10>;
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
+
+	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts

@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "EnGenius EMD1";
+	compatible = "engenius,emd1";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+			switch_lan_bmp = <0x20>;
+			switch_wan_bmp = <0x00>;
+		};
+
+		edma@c080000 {
+			status = "okay";
+			qcom,num_gmac = <1>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "white:power";
+			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "red:wlan2g";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		mesh {
+			label = "orange:mesh";
+			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio54", "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "0:SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition1@40000 {
+				label = "0:MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition2@60000 {
+				label = "0:QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition3@c0000 {
+				label = "0:CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition4@d0000 {
+				label = "0:DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition5@e0000 {
+				label = "0:APPSBLENV";
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition6@f0000 {
+				label = "0:APPSBL";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+			partition7@170000 {
+				label = "0:ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+			partition8@180000 {
+				label = "userconfig";
+				reg = <0x00180000 0x00080000>;
+				read-only;
+			};
+			partition9@200000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x200000 0x01e00000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gmac0 {
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	qcom,forced_speed = <1000>;
+	qcom,forced_duplex = <1>;
+	vlan_tag = <1 0x20>;
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-EMD1";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-EMD1";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts

@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "EnGenius EMR3500";
+	compatible = "engenius,emr3500";
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2_hs_phy: hsphy@a8000 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power: white {
+			label = "white:power";
+			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		red {
+			label = "red";
+			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange {
+			label = "orange";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio54", "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "0:MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "0:QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "0:CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition@d0000 {
+				label = "0:DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition@e0000 {
+				label = "0:APPSBLENV";
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition@f0000 {
+				label = "0:APPSBL";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+			partition@170000 {
+				label = "0:ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "userconfig";
+				reg = <0x00180000 0x00080000>;
+				read-only;
+			};
+			partition@200000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x200000 0x1e00000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&gmac0 {
+	vlan_tag = <1 0x10>;
+};
+
+&gmac1 {
+	vlan_tag = <2 0x20>;
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts

@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "EnGenius ENS620EXT";
+	compatible = "engenius,ens620ext";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+
+		/*
+		 * Disable the broken restart as a workaround for the buggy
+		 * 3.0.0/3.0.1 U-boots that ship with the device.
+		 * Note: The watchdog is now used to restart this device.
+		 */
+		restart@4ab000 {
+			status = "disabled";
+		};
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power: power {
+			label = "amber:power";
+			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		};
+
+		lan1 {
+			label = "green:lan1";
+			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2 {
+			label = "green:lan2";
+			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan2g {
+			label = "green:wlan2g";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "green:wlan5g";
+			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		mux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition@e0000 {
+				label = "APPSBLENV"; /* uboot env*/
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition@f0000 {
+				label = "APPSBL"; /* uboot */
+				reg = <0x000f0000 0x00090000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "ART";
+				reg = <0x00180000 0x00010000>;
+				read-only;
+			};
+			partition@190000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x00190000 0x14d0000>;
+			};
+			partition@1660000 {
+				label = "failsafe";
+				reg = <0x01660000 0x008F0000>;
+				read-only;
+			};
+			partition@1f50000 {
+				label = "u-boot-env";
+				reg = <0x01f50000 0x00010000>;
+				read-only;
+			};
+			partition@1f60000 {
+				label = "userconfig";
+				reg = <0x01f60000 0x000a0000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts

@@ -0,0 +1,31 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4018-ex61x0v2.dtsi"
+
+/ {
+	model = "Netgear EX6100v2";
+	compatible = "netgear,ex6100v2";
+};
+
+&wifi0 {
+	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
+};
+
+&wifi1 {
+	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts

@@ -0,0 +1,31 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4018-ex61x0v2.dtsi"
+
+/ {
+	model = "Netgear EX6150v2";
+	compatible = "netgear,ex6150v2";
+};
+
+&wifi0 {
+	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
+};
+
+&wifi1 {
+	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi

@@ -0,0 +1,312 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Netgear EX61X0v2";
+	compatible = "netgear,ex61x0v2";
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+			qcom,num_gmac = <1>;
+		};
+	};
+
+	aliases {
+		led-boot = &power_amber;
+		led-failsafe = &power_amber;
+		led-running = &power_green;
+		led-upgrade = &power_amber;
+		label-mac-device = &gmac0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	led_spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+
+		led_gpio: led_gpio@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			registers-number = <1>;
+			spi-max-frequency = <1000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_amber: power_amber {
+			label = "amber:power";
+			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		power_green: power_green {
+			label = "green:power";
+			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		right {
+			label = "blue:right";
+			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		left {
+			label = "blue:left";
+			gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		client_green {
+			label = "green:client";
+			gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		client_red {
+			label = "red:client";
+			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		router_green {
+			label = "green:router";
+			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		router_red {
+			label = "red:router";
+			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "green:wps";
+			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	mx25l12805d@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition1@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition2@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition3@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition4@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition5@E0000 {
+				label = "APPSBLENV";
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+
+			partition6@F0000 {
+				label = "APPSBL";
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition7@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+
+			partition8@180000 {
+				label = "config";
+				reg = <0x00180000 0x00010000>;
+				read-only;
+			};
+
+			partition9@190000 {
+				label = "pot";
+				reg = <0x00190000 0x00010000>;
+				read-only;
+			};
+
+			partition10@1a0000 {
+				label = "dnidata";
+				reg = <0x001a0000 0x00010000>;
+				read-only;
+			};
+
+			partition11@1b0000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x001b0000 0x00e10000>;
+			};
+
+			partition12@fc0000 {
+				label = "language";
+				reg = <0x00fc0000 0x00040000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts

@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "AVM FRITZ!Box 4040";
+	compatible = "avm,fritzbox-4040";
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &flash;
+		led-running = &power;
+		led-upgrade = &flash;
+		label-mac-device = &gmac0;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2@60f8800 {
+			status = "okay";
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wlan {
+			label = "wlan";
+			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	switch-leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "green:wlan";
+			gpios = <&ethphy0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		panic: info_red {
+			label = "red:info";
+			gpios = <&ethphy0 1 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&ethphy1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		power: power {
+			label = "green:power";
+			gpios = <&ethphy2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "green:lan";
+			gpios = <&ethphy3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		flash: info_amber {
+			label = "amber:info";
+			gpios = <&ethphy3 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		mux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		status = "okay";
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition0@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition1@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition2@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition3@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition4@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition5@e0000 {
+				label = "APPSBLENV"; /* uboot env - empty */
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition6@f0000 {
+				label = "urlader"; /* APPSBL */
+				reg = <0x000f0000 0x0002dc000>;
+				read-only;
+			};
+			partition7@11dc00 {
+				/* make a backup of this partition! */
+				label = "urlader_config";
+				reg = <0x0011dc00 0x00002400>;
+				read-only;
+			};
+			partition8@120000 {
+				label = "tffs1";
+				reg = <0x00120000 0x00080000>;
+				read-only;
+			};
+			partition9@1a0000 {
+				label = "tffs2";
+				reg = <0x001a0000 0x00080000>;
+				read-only;
+			};
+			partition10@220000 {
+				label = "uboot";
+				reg = <0x00220000 0x00080000>;
+				read-only;
+			};
+			partition11@2A0000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x002a0000 0x01c60000>;
+			};
+			partition12@1f00000 {
+				label = "jffs2";
+				reg = <0x01f00000 0x00100000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ethphy0 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+&ethphy1 {
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	enable-usb-power {
+		gpio-hog;
+		line-name = "enable USB3 power";
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&ethphy2 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+&ethphy3 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts

@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "GL.iNet GL-AP1300";
+	compatible = "glinet,gl-ap1300";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			/* select hostmode */
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+			status = "okay";
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb2@60f8800 {
+			status = "okay";
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+			switch_lan_bmp = <0x18>;
+			switch_wan_bmp = <0x20>;
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "green:power";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		status = "okay";
+
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "APPSBLENV"; /* uboot env*/
+				reg = <0x000e0000 0x00010000>;
+			};
+
+			partition@f0000 {
+				label = "APPSBL"; /* uboot */
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+
+			partition@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+		};
+	};
+
+	spi-nand@1 {
+		status = "okay";
+
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi0_pins: spi0_pinmux {
+		mux_spi {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio5";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "GL-AP1300";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "GL-AP1300";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts

@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "MikroTik hAP ac2";
+	compatible = "mikrotik,hap-ac2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		led-boot = &led_user;
+		led-failsafe = &led_user;
+		led-running = &led_user;
+		led-upgrade = &led_user;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		counter@4a1000 {
+			compatible = "qcom,qca-gcnt";
+			reg = <0x4a1000 0x4>;
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			/* select hostmode */
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+			status = "okay";
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+
+			dwc3@8a00000 {
+				phys = <&usb3_hs_phy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		mode {
+			label = "mode";
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "green:power";
+			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			panic-indicator;
+		};
+
+		led_user: user {
+			label = "green:user";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <2>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	enable-usb-power {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "enable USB power";
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Qualcomm";
+				reg = <0x0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				compatible = "mikrotik,routerboot-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				label = "RouterBoot";
+				reg = <0x80000 0x80000>;
+				read-only;
+
+				hard_config {
+					read-only;
+					size = <0x2000>;
+				};
+
+				dtb_config {
+					read-only;
+				};
+
+				soft_config {
+				};
+			};
+
+			partition@100000 {
+				compatible = "mikrotik,minor";
+				label = "firmware";
+				reg = <0x100000 0xf00000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&ethphy0 {
+	qcom,single-led-1000;
+	qcom,single-led-100;
+	qcom,single-led-10;
+};
+
+&ethphy1 {
+	qcom,single-led-1000;
+	qcom,single-led-100;
+	qcom,single-led-10;
+};
+
+&ethphy2 {
+	qcom,single-led-1000;
+	qcom,single-led-100;
+	qcom,single-led-10;
+};
+
+&ethphy3 {
+	qcom,single-led-1000;
+	qcom,single-led-100;
+	qcom,single-led-10;
+};
+
+&ethphy4 {
+	qcom,single-led-1000;
+	qcom,single-led-100;
+	qcom,single-led-10;
+};
+
+&wifi0 {
+	status = "okay";
+
+	qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
+};
+
+&wifi1 {
+	status = "okay";
+
+	qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
+};

feeds/ipq40xx/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts

@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
+
+#include "qcom-ipq4018-jalapeno.dtsi"
+
+/ {
+	model = "8devices Jalapeno";
+	compatible = "8dev,jalapeno";
+};