The kernel is only able to know the number of USB PD port through
EC_CMD_USB_PD_PORTS, but the kernel needs also to be able to know
that there is a dedicated port. Add a host command that will
return the total number of charge port (USB PD + BJ).
BRANCH=None
BUG=chromium:841944
TEST=Called command from kernel driver and checked that the port count
was the expected value.
Change-Id: I6ccd8a2dee35bbe8bb66dfbe09d1cc09c54b73a0
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-on: https://chromium-review.googlesource.com/1046593
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
When EC sees discharge current hit BAT_MAX_DISCHG_CURRENT,
we kick off a timer and ask AP to throttle.
Then EC keeps monitoring discharge current. If the current doesn't
drop below BAT_MAX_DISCHG_CURRENT - BAT_OCP_HYSTERESIS, we restart
the timer and notify AP again, which shouldn't happen unless
AP misses or ignores the first notification.
When the timer expires, which means EC hasn't seen over-current
for BAT_OCP_TIMEOUT_US, we ask AP to stop throttling.
BUG=b:74321682, chromium:838754
BRANCH=scarlet
TEST=manually test on scarlet, confirm EC sends
EC_HOST_EVENT_THROTTLE_START and EC_HOST_EVENT_THROTTLE_STOP
host events when entering/exiting OCP.
Change-Id: I1e55fc23249596d8afec52a3885655ca9c1f2151
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/994188
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
This patch adds an interrupt handler for a tablet switch and an init
hook to enable the interrupt.
The handler does the typical tasks for convertible devices: 1. sets
tablet mode then 2. disables peripherals if tablet mode is on.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=b:77298177
BRANCH=none
TEST=buildall. Verify on Nami.
Change-Id: If7fb5ea15f388d2b6084d800d2bc05efafd1945e
Reviewed-on: https://chromium-review.googlesource.com/1043057
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
This patch refactors motion_lid so that EC can decide to use lid angles
to set tablet mode at run time.
Then, it implements board_is_lid_angle_tablet_mode to enable the feature
for Nami and Vayne.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=b:77298177
BRANCH=none
TEST=Verify on Nami.
Change-Id: Ib717911a16fe031aa6c6ede731e6aa722d32d022
Reviewed-on: https://chromium-review.googlesource.com/1024914
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Port 0:
TCPC: ANX3429
PPC: SN5S330
BC1.2: PI3USB9281
Port 1:
TCPC: PS8751
Power switch (sink): NX5P3290
Power switch (source): NX20P5090
BC1.2: PI3USB9281
Charger: ISL9238
BRANCH=none
BUG=b:74395451
TEST=make buildall -j
TEST=Did "gpioset EN_PP5000_A 1" before the folllowing tests:
* Plugged adapter to port-0/port-1/both and saw charging
* Plugged USB device to port-0/port-1/both and saw sourcing VBUS
* Plugged adapter to one port and USB device to another port
* Plugged USB disk to port-0 and booted into kernel
* When AP off, not sourcing VBUS to USB device
* Rebooting AP still works
Change-Id: Icde5e24c2cda3d0f2046486528a210af84befcca
Signed-off-by: Tom Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/969701
Commit-Ready: Wai-Hong Tam <waihong@google.com>
Tested-by: Wai-Hong Tam <waihong@google.com>
Reviewed-by: Wai-Hong Tam <waihong@google.com>
Update the fingerprint match event to include the index of the template
which matched.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=poppy
BUG=b:77516790
TEST=on ZerbleBarn, enroll 5 fingers and do matching from the console,
see the proper finger index in the trace.
TEST=on Meowth, check unmodified biod still works for match with the
updated MCU firmware.
CQ-DEPEND=CL:*621808
Change-Id: I5be77ba65ce232989606274aba9a6c20841d533c
Reviewed-on: https://chromium-review.googlesource.com/1047267
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Nicolas Norvez <norvez@chromium.org>
the isl9238 needs to see a higher PPVAR_SYS voltage than we were using
to avoid tripping Low_VSYS. Low_VSYS is one of the terms causing the
isl9238 to assert PROCHOT. its lowest default voltage threshold is
about 6.1v which is too close to the battery "minimum" that we were
using to set PPVAR_SYS. it's better to use the "normal" battery
voltage so the running-on-AC case is similar to the running-on-battery
case.
BUG=b:78911901
BRANCH=none
TEST=examined isl9238 regs to verify it is no longer tripping Low_VSYS
Change-Id: Iafc39e988a5af668c6cc1b5485841f6d659b1e8b
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1043456
Commit-Ready: Caveh Jalali <caveh@google.com>
Tested-by: Caveh Jalali <caveh@google.com>
Tested-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
We add a configuration option to set the minimum shared memory
size (CONFIG_SHAREDMEM_MINIMUM_SIZE), so that the link will fail
if there is not enough IRAM left.
Also, we add 2 macros around shared_mem_acquire, that check, at
build time, that the shared memory size is sufficient for the
allocation:
- SHARED_MEM_ACQUIRE_CHECK should be used instead of
shared_mem_acquire, when size is known in advance.
- SHARED_MEM_CHECK_SIZE should be used when only a maximum size
is known.
This does not account for "jump tags" that boards often add on
jump from RO to RW. Luckily, RW usually does not do verification,
and does not need as much shared memory.
BRANCH=none
BUG=chromium:739771
TEST=make buildall -j, no error
Change-Id: Ic4c72938affe65fe8f8bc17ee5111c1798fc536f
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1002713
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add a state to indicate that a data role is actually disconnected and
notify the board-level data swap function with this state when a cable
is unplugged. This allows the board to clean up and restore any state
that may have been set up with a data role swap.
BUG=b:78308749
BRANCH=eve,poppy
TEST=manual on eve: plug in C-to-C cable, execute data swap on port 0
with 'pd 0 swap data' and ensure the OTG pins are asserted. Then unplug
the cable and ensure OTG pins are now deasserted.
Change-Id: I7d8fff22dd5836b4b5af54f0ede71ee1b6e40b5c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1035423
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Normally on lid open, if chipset is off, we pulse the power button
to wake the AP. If we are in PWRBTN_STATE_INIT_ON, then we are already
waiting to power on the AP so ignore the lid open to avoid turning
on the AP too soon.
BUG=b:77455171
BRANCH=none
TEST=Plug power into Grunt with no battery.
Change-Id: Ie57e998725af0ace525f9f2102a0f5a282382a57
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1031565
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
In order to be able to recover from the AP and Cr50 getting out of
sync, this logging functionality gives Cr50 a way to track the
state changes of the merkle tree so that the AP can be updated to
the current state as long as it has a recent enough copy.
This involves packing the important information so it can be stored
efficiently on flash, and adding the necessary messages for the
replay.
CQ-DEPEND=CL:895395,CL:929430
BRANCH=none
BUG=chromium:809729, chromium:809745
TEST=cd ~/src/platform/ec && V=1 make run-weaver_ng -j
Change-Id: I40f98de2c8e9706cccb5b922215699f2132fa121
Signed-off-by: Allen Webb <allenwebb@google.com>
Reviewed-on: https://chromium-review.googlesource.com/963773
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This connects the pinweaver code to the tpm vendor
specific command code.
CQ-DEPEND=CL:895395
BRANCH=none
BUG=chromium:809741
TEST=TBD
Change-Id: I2a6c4bf52ad77b7bf0395095404e925e1dd48dbc
Signed-off-by: Allen Webb <allenwebb@google.com>
Reviewed-on: https://chromium-review.googlesource.com/929430
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This adds some of the ground work for hardware backed brute force
resistance on Cr50. The feature is called Pinweaver. It will
initially be used to enable PIN authentication on CrOS devices
without reducing the security of the platform. A Merkle tree is
used to validate encrypted metadata used to track login attempts.
The metadata tracks counts of failed attempts, a timestamp of the
last failed attempt, the secrets, and any associated parameters.
Instead of storing the metadata on Cr50 an AES-CTR is used with an
HMAC to encrypt the data so it can be stored off-chip and loaded
when needed.
The Merkle tree is used to track the current state of all the
metadata to prevent replay attacks of previously exported copies.
It is a tree of hashes whose root hash is stored on Cr50, and whose
leaves are the HMACs of the encrypted metadata.
BRANCH=none
BUG=chromium:809730, chromium:809741, chromium:809743, chromium:809747
TEST=cd ~/src/platform/ec && V=1 make run-pinweaver -j
Change-Id: Id10bb49d8ebc5a487dd90c6093bc0f51dadbd124
Signed-off-by: Allen Webb <allenwebb@google.com>
Reviewed-on: https://chromium-review.googlesource.com/895395
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Currently, if a board supports dual role power ports, the EC will
briefly apply Rp resistors on the CC lines upon initializing the PD
tasks. This was put in place such that the partner port is a known
state. In the case of an external PD charger, the presence of the Rp
will cause the charger to stop sourcing VBUS. We only apply the pull up
for reset cases where the EC did not just loose power (e.g. power on
reset or brownout).
This however presents a problem when booting off of AC only. If a user
types 'reboot ap-off', there will be an extra reset because VBUS is
dropped and the "ap-off" flag will be lost.
This commit simply checks to see if there is an explicit contract in
place for a port. If an explicit contract is in place and PD
communications are allowed, we will not apply the Rp resistors. The PD
state machine will then attempt to send a SoftReset to the port partner
in order to reset the PD protocol layer. If an explicit contract is not
in place, or if PD communications are not allowed, the Rp's will be
asserted briefly as before.
BUG=b:72838807,b:35587129,chromium:712746
BRANCH=None
TEST=Flash zoombini; Remove battery and plug in just AC; Enter `reboot
ap-off` and verify that AP remains off in the subsequent boot and there
is no extra reset.
TEST=Make zoombini locked. Have a PD contract in RW, reboot to RO and
verify that VBUS is dropped from a PD charger.
TEST=Repeat test on meowth.
CQ-DEPEND=CL:905922
Change-Id: Ie2e3fe5b6b318e166b2a42dfa3241646369ec571
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/905390
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
According to PD spec:
- Data role shall not be reset on soft reset.
- Data role shall be reset to power-role default on hard reset.
Implement the above. Even if both ports follow spec, it's still possible
for a data role conflict to occur if, for example, data role swap occurs
(data role mismatches power role default) followed by a hardware reset
of one port (such that data role gets reset to power role default).
Handle such cases by taking error recovery actions.
BUG=b:71333840,chromium:805040
TEST=Connect scarlet to powered Apple accessory, verify scarlet comes up
in SNK-DFP after soft reset and issuing "reboot" on EC console. After
issuing a hard reset, the port comes up in SNK-UFP (which is the
power-role default).
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I65139f277d59a0612f8323d711080f52425ff5e7
Reviewed-on: https://chromium-review.googlesource.com/885462
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In order to re-initialize our PD state variables properly following a
reset, we need to save our current power role. This commit adds a bit
in the BBRAM PD flags for the power role.
BUG=b:71333840,chromium:805040
BRANCH=None
TEST=Add code to save data role and restore both roles, verify that both
are saved accordingly.
Change-Id: I156ae8179c8e12c63322132d1f0078990bd215f8
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/979264
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
pd_get/set_saved_active() made the assumption that there were only two
ports. But now, we have a board that turned that port count all the way
up to 3. This commit adds in that new port BBRAM index. It also turns
the byte where the port information was stored into a byte of flags,
where bit 0 indicates whether there was an explicit contract in place or
not.
BUG=b:72838807
BRANCH=None
TEST=With some code to check for explicit contract state for port 2,
verify it's functional.
Change-Id: I6f062f67bd3c47dd43ea7e24e844a9286fa37af9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/905923
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
While troubleshooting why a generic $19.99 Multiport (USB, HDMI, Type-C)
Type-C dongle didn't work on Scarlet, I noticed that Vconn Req and Vbus
Req were both set to zero in the AMA VDO. For a better user experience,
default to Vbus ON if both Vconn and Vbus Req are both zero.
BUG=b:78286905
BRANCH=NONE
TEST=manual
Tested the generic dongle with USB-Keyboard, TypeC power adapter,
and HP monitor.
Change-Id: I170eef1372c3621334de2c457bd4533eea744cc0
Signed-off-by: Sam Hurst <shurst@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1019611
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Now that board version can come from CBI, we can have a real error
reading it. We should pass that error to the console or to the
AP on the host command and let the AP firmware (or user) decided how to
handle that error case
Also update the CONFIG_BOARD_VERSION to be derived instead of needed
in most cases.
BRANCH=none
BUG=b:77972120
TEST=Error reported on EC console and AP console when CBI is
invalid on yorp
Change-Id: Ib8d80f610ea226265a61e68b61965150cdc9bb04
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1015776
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Also updated the description of the cbi command in help
BRANCH=none
BUG=none
TEST=wrote directly to flash and verified the cbi command updated
Change-Id: I54b5d995a0f06b9566622a5079da11ce575fb309
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1008831
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
The ISO7816-4 standard for APDU format says the APDU header minimum size
is 4 bytes (CLA, INS, P1, P2). The Lc field is absent if the command has
no data.
Update the size check to accept short APDU (the actual APDU
len was already computed properly for this case).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=cr50
BUG=b:72788497
TEST=adhoc
Change-Id: Ic60fa51bd4746b04016c488a38fe3ae7585e9942
Reviewed-on: https://chromium-review.googlesource.com/1005345
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
charge_prevent_power_on() had sections which were gated on the following
CONFIG_* option:
CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT
However, the block of code that this gated didn't even take the battery
percentage into account and made it very confusing as to why.
This commit simply changes the CONFIG_* option used to gate to be the
following:
CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON
This better reflects the checks that were actually being made.
Additionally, this CONFIG_* option is defined by default for boards that
have a chipset task and is initialized to 15W, which is the power that
indicates that the charger is likely to speak USB PD.
BUG=b:76174140
BRANCH=None
TEST=make -j buildall
Change-Id: Ic9158dd7109ce6082c6d00157ff266842363b295
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/977431
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
the "cutoff" command would print "Invalid argument" which is
EC_invalid but the underlying funciton actually returned EC_RES_ERROR,
so we need to map the error codes from the EC_RES_* (enum ec_status)
number space to the EC_ERROR_* (enum ec_error_list) number space.
BUG=none
BRANCH=none
TEST=cutoff command now prints "Unknown error" instead of "Unimplemented".
Change-Id: I0b2928e629cc859bc3ba5587bf6c7fd70e1084d7
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/999102
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
When using VBUS_DETECT_TCPC the charger code relied on the TCPC
alert to initialize the VBUS supply, but that happens too late in
board startup sequence to allow an initally plugged in USB-C power
supply to be chosen as the active charging port.
We can and should initialize the the supplier sooner as to prevent
the charge_manager_is_seeded() check from failing thus preventing
the board from choosing a charging port.
BRANCH=none
BUG=b:77458917
TEST=PS8751 on yorp will negotiate 20V over USB-C (which was prevent
by the charge_manager not being seeded)
Change-Id: I6f612c508932a90ece0036ce8310a20de02d8467
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/994707
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
It is important for the OS to be able to find out the state of CCD and
current capabilities settings of the device.
This patch defines a structure to use to report information about CCD
state from Cr50 to the host and adds a CCD vendor subcommand to allow
to retrieve the information from Cr50.
Some structure and variable definitions had to be moved into the .h
file to make it possible to share them between Cr50 and gsctool.
BRANCH=cr50, cr50-mp
BUG=b:72718383
TEST=with the following patch applied verified that CCD info is
properly reported. Also verified that other CCD subcommands still
work as advertised.
Change-Id: I4a783e6817ed364b9e64522ebbe968d4a657a84c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/999825
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Since the last update of the 'fpcapture' debug console command, the
requested capture mode was ignored.
Fix the 2 identically-named variables stepping on each other
(dear compiler, why are you so distracted too ?)
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=poppy
BUG=b:72360575
TEST=on ZerbleBarn, run 'fpcapture 0' and 'fpcapture 1'
Change-Id: I1fefd24b988f0db8bcbb90cc3370135d01cbddee
Reviewed-on: https://chromium-review.googlesource.com/999600
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Nicolas Norvez <norvez@chromium.org>
Swapping binary blobs in the image post compilation/linking is not
working quite as expected, because some of the const data values seem
to be inlined by the compiler, the values are not looked up at run
time.
This happens to the RMA public key ID field, which is just one byte in
size. Marking the field 'volatile' seems to be fixing the issue.
BRANCH=cr50, cr50-mp
BUG=b:73296144
TEST=with the rest of the patches applied public key substitution
between test and prod works as expected.
Change-Id: I12d5d1243e7988ab59bf3bba8cdfa46f27116bd2
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/996513
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
This patch allows chips which run code in RAM to erase or write
regions even if they're active.
BUG=b:77306460
BRANCH=none
TEST=flashrom -p ec -w /tmp/ec.bin on Fizz
Change-Id: Ib536b250dde78283513acb942507c67da0a6f622
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/997022
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This patch adds execution-in-ram, opposite of XIP: execution-in-place
(a.k.a. XIP) to the EC features. It can be currently implied by
CONFIG_EXTERNAL_STORAGE.
BUG=b:77306460
BRANCH=none
TEST=Verify ectool prints EXEC_IN_RAM on Fizz.
Change-Id: I4a7fb3b267864debe59fd211956371eceac57613
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/995968
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This patch clarifies the logic which determines whether we perform EFS
or not and print different messages for each case.
BUG=none
BRANCH=none
TEST=buildall
Change-Id: I5588018a3594be2bcad84a2f74f805b76a195f85
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/996398
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Use RMA public key definition generated based on the binary blob
containing the key and key ID.
Key generation is controlled by the make file in common/, but actual
key blob comes from the board directory.
The structure holding the key and key ID is being modified to allow
initialization using a flat array.
No more need in defining CONFIG_RMA_AUTH_SERVER_PUBLIC_KEY and
CONFIG_RMA_AUTH_SERVER_KEY_ID.
BRANCH=cr50, cr50-mp
BUG=b:73296144, b:74100307
TEST='make buildall' still succeeds.
test RMA server generated authentication codes are accepted when
unlocking RMA.
Change-Id: I8ade94de6eb69b3e49bc5b948dbac20e59962acf
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/990783
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Majority of the chipsets do not have a dedicated GPIO to trigger
AP cold reset. Current code either ignores cold reset or does a warm
reset instead or have a work around to put AP in S5 and then bring
back to S0. In order to avoid the confusion, removed the cold reset
logic and only apreset is used hence forth.
BUG=b:72426192
BRANCH=none
TEST=make buildall -j
Manually tested on GLKRVP, apreset EC command can reset AP.
Change-Id: Ie32d34f2f327ff1b61b32a4d874250dce024cf35
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/991052
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
__builtin_ffs takes an int as argument, and, therefore, does not
find bits >= 32. Fix this up when CONFIG_HOST_EVENT64.
BUG=b:69329196
BRANCH=fizz,poppy
TEST=Patch coreboot to add bit 33 in SCI mask, add EC code to send
such events, EC does not watchdog anymore
Change-Id: If868095f19fe1940b4f5924cf669a719f9535991
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/989514
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
We want to be able to replace RMA public key and its key ID in the elf
module before signing. Let's make sure they are packed together for
ease of find and replace operation.
BRANCH=cr50, cr50-mp
BUG=b:73296144
TEST=built an image, verified that RMA unlock still works.
Change-Id: I1a8e155391421f32b7422f11ab2a5f53d1ddd0ac
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/990781
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When reporting state, current code was only using the lid battery
level to determine if we are "near full" (different LED color).
Fix this to include both lid and base batteries in the logic.
BRANCH=none
BUG=b:75982704
TEST=Lid at 100%, base at 50%, LED is amber when charging.
Disconnect base => LED turns white (lid is near full)
Change-Id: I6fd44a16832cbd6d440f1bbb8c696e41c3f4699b
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/983202
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Tell the base to hibernate when we are in S5, and no AC is connected.
Also, wake the base when AC status changes (S5), and when the system
transistions out of S5.
BRANCH=none
BUG=b:71874971
TEST=1. Lid EC console: apshutdown => Check that Base EC hibernates
2.a. Lid EC console: powerb; => Check that base reconnects
2.b. Connect/disconnect adapter: check that base disconnects
and reconnects
Change-Id: I5e9a4afc64a07ad92f37d171a78a914d26f07c8e
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/958814
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Allows the lid to hibernate the base.
BRANCH=none
BUG=b:71874971
TEST=With following change, lid hibernates the base when in S5,
and no AC is connected.
Change-Id: I8c8017d638442ba8b17c8117d0b1b31f3538925f
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/981914
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Currently, charge state changes (i.e. enum charge_state_v2) are not
announced. Because of this, a charge LED is controlled by HOOK_TICK
(and polling charge status by charge_get_state).
Instead of checking charge status every 200 msec (or 500 msec), we
should change a charge LED only when charge status changes.
This patch makes HOOK_BATTERY_SOC_CHANGE get notified when charge
state transitions.
BUG=chromium:824942
BRANCH=none
TEST=On Nami, try AC plug/unplug, battery connect/disconnect.
Change-Id: I47a9542035666636d55f414e857d55ec36d69638
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/981397
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
chgdualdebug allows to force the dual-battery charging algorithm
to take certain decisions.
On AC, `chgdualdebug c <current>` allocates up to `<current>` to
the base, capped at the total current available from the adapter
(`chgdualdebug c auto` re-enables the algorithm).
When no AC is connected, `chgdualdebug d <current>` set the
current to transfer from lid to base (negative to transfer from
base to lid).
BRANCH=none
BUG=b:71881017
TEST=Try the commands above, see that they do what they advertise.
Change-Id: I98ee60eadd8f9202c1d489d9fca63267c32e8178
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/958811
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The NX20P3483 is a USB PD and Type C high voltage sink/source combo
switch. This CL adds support for this PPC variant. Unlike the TI
SN5S330, the NX20P3483 does not support VCONN and does not need to be
informed of CC polarity by the TCPM. To account for these differences,
2 new PPC config options are added and the driver for the TI SN5S330
was modified to include these new options.
The SNK/SRC switch mode for the NX20P3483 is controlled by 2 GPIO
signals which may be connected the EC or directly to the TCPC. To
handle both cases, the ppc_chips structure was modified with a flags,
snk_gpio, and src_gpio elements.
BUG=b:74206647
BRANCH=none
TEST=make -j buildall and verified there are no build errors.
Change-Id: Ic4415ab7571b80e7661ea673434eaf4cf1f1fd2d
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/966926
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
This change adds a new config option CONFIG_I2C_XFER_CALLBACK that
makes i2c_xfer callback into board-provided functions before the start
and after the end of every I2C transaction. This can be used by boards
to implement any I2C device-specific quirks e.g. requiring minimum
bus-free time between every I2C transaction when the slave device
cannot actually do clock stretching.
BUG=b:73147310
BRANCH=None
TEST=make -j buildall
Change-Id: I452de4f22a81ffd97ca4944e1b940a3537637df9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/956934
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add the state machine and the interfacing to the enrollment and matching
algorithm providing by the private driver part.
Implement the host commands interface for it (based on MKBP event) along
with the console debug commands to exercise it.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=b:72360575
TEST=On ZerbleBarn console, use 'fpenroll' then 'fpmatch' for several
fingers.
TEST=With ZerbleBarn and a servo-v2, retrieve and upload templates with
'ectool_servo fptemplate'.
TEST=On Meowth, exercise with the prototype of biod
CrosFpBiometricsManager.
CQ-DEPEND=CL:*555078
Change-Id: I10b0d76d3faa898a682cf9a2eb7fc7e212b0c20c
Reviewed-on: https://chromium-review.googlesource.com/886401
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
These print-outs are usually very deep in the call stack (rare
error cases that do not happen often), and therefore are the
longest branches on most tasks. Replacing cprints by
cputs/cprintf helps with that.
BRANCH=none
BUG=b:75234824
TEST=make BOARD=soraka SECTION=RW analyzestack | grep Task shrinks
significantly (more than 100 bytes on some tasks)
Change-Id: I7c5bb750f4aa624cd06736e0bb6b24d307fc0196
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/966041
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
