When calling problem() with 0 as value, it's never printed on the EC
console since the problem() function is de-duplicating the messages by
checking against the last value (which is initialized at zero).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:38401
TEST=run on the current Ryu code (which has a faulty BQ27742 driver) and
see the "charge problem: static update [...]" message.
Change-Id: Iedfbc95e3751bc5b22452187b404a09b633160d7
Reviewed-on: https://chromium-review.googlesource.com/262448
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Some platforms are unable to access the 900h-9ffh region over LPC and
must instead access memmap data through the ACPI CMD / DATA ports. To
avoid racing with data updates, disallow changes to multi-byte memmap
data while in burst mode.
Linux currently enables burst mode when accessing multi-byte data and
disables it immediately afterward, though the ACPI spec defines burst mode
in a more general way.
BUG=chrome-os-partner:38224
TEST=Manual on Samus. Undefine LPC_MEMMAP and modify asl to move memmap
data to ERAM at offset 0x20. Verify system boots cleanly and battery
status is updated immediately on plug / unplug.
BRANCH=None
Change-Id: Ib848bdb491fdfece96ad0cee7a44ba85b4a1a50b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/262072
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This required changing the USB-SPI implementation slightly
so that all work is done within the deferred callback. In
particular, this allows the board specific enable and disable
functions to do things that can only be done from a task
context, like sleeping.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I3f6a01ed9d6f31a3259ba0a0f6b4e123d6d2e718
Reviewed-on: https://chromium-review.googlesource.com/260964
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously we defined separate functions to map registers to protect
ranges for each supported SPI ROM. This change instead adds a protect range
table + flags for each supported SPI ROM and adds common functions for
translation between ranges + registers. This makes supporting new parts
easier. Since we will never use most supported protection ranges, we can
even simplfy the tables.
The implementation is now similar to flashrom.
BUG=chrome-os-partner:37688
TEST=Manual on Glower.
flashwp disable + spi_flash_rsr --> 0
flashinfo --> shows no protection
spi_flash_prot 0 0x10000 + spi_flash_rsr --> 0x24
flashinfo --> shows 64KB protected
spi_flash_prot 0 0x20000 + spi_flash_rsr --> 0x28
flashinfo --> shows all 96KB protected
spi_flash_prot 0 0x40000 + spi_flash_rsr --> 0x2c
spi_flash_prot 0 0x80000 + spi_flash_rsr --> 0x10
spi_flash_prot 0 0 + spi_flash_rsr --> 0x00
spi_flash_prot 0 0x1000 --> error
spi_flash_prot 0x10000 0x10000 --> error
BRANCH=None
Change-Id: Ie5908ce687b7ff207b09794c7b001a4fbd9e0f5a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/259310
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This udev rule creates a directory in /dev/google for each
device attached. The name of the directory is unique to the
device and is prefixed with the device product name. Within
the directory there is a serial directory that contains
symlinks to each USB serial port exposed by the device. The
symlinks are named based on the USB interface name provided
by the EC. Additional subdirectories can be added for I2C,
JTAG, GPIOs, and SPI as needed.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=Verify that two different CCD devices generate uniquely named
entries.
Change-Id: I7e6f2ace29b7302c7c072bcf6aab7c8f060b993a
Reviewed-on: https://chromium-review.googlesource.com/260420
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
On hard reset / hibernate, RAM will be erased and panic data will
normally be lost. When software panic data saving is enabled, try to
save this data just before hard reset and restore it when we come back
up.
BUG=chrome-os-partner:37380
TEST=Manual on Samus with WP + SW sync enabled. Boot AP, then run "crash
divzero" on console. After hard reset, verify that "panicinfo" dumps
data and shows divzero exception code.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I9516dd4b6db12ef35e512cc4710f9b97d7e663cb
Reviewed-on: https://chromium-review.googlesource.com/255912
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The ioctl return status for CROS_EC_DEV_IOCXCMD is inconsistent across
kernel versions:
- In 3.8 kernel, on INVALID_VERSION EC result, -EBADMSG is returned
- In 3.14 kernel, on INVALID_VERSION EC result, success status is
returned
In both cases, the INVALID_VERSION result is written to the
cros_ec_command.result parameter.
The inconsistency here should be fixed with kernel patches. In any case,
there is little harm with trying v0 of GET_VERSIONS on any failure of the v1
command.
BUG=chrome-os-partner:37668,chromium:466896
TEST=Manual on peppy. Verify 'ectool thermalget 0 0' prints threshold info.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ic1eb3f8f2fa95711ec15a5afb740af8f18b88b55
Reviewed-on: https://chromium-review.googlesource.com/260004
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Bill Richardson <wfrichar@chromium.org>
Trybot-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add the proper checks to be able to compile source-only PD devices with
the common runtime.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:37078
TEST=make buildall
build honeybuns without CONFIG_USB_PD_DUAL_ROLE defined
Change-Id: I7ad0b39b2e62736117ec2d7b5163502afbf14786
Reviewed-on: https://chromium-review.googlesource.com/259112
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
The Rp resistor on CC1 is set for a 3.0A capability,
so Vnc (no-connection voltage) is 2.45 V.
CC2 is not connected (captive cable), so for a PD source, it's identical
to being always pulled-up to 3.3V (no sink connection).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:37078
TEST=connect to Samus and see PD activity
Change-Id: I8df0561cea59896d65d9be6523d4eed953851129
Reviewed-on: https://chromium-review.googlesource.com/259301
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Modified version of /board/fruitpie.
Attempted to capture GPIO definitions. Other changes
consisted of modifying functions to enable compilation.
No real functionality as of yet.
TEST=Serial console and I2C functions have been verified
BUG=chrome-os-partner:37078
BRANCH=samus
Change-Id: Iedfc724a058e4220176193ef0f66e5bf45eabbd9
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/252426
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
W25X40 uses a different protection register encoding than our existing
W25Q64 code. Move the SPI ROM option to a config, and add support for
the new part.
BUG=chrome-os-partner:37688
TEST=`make buildall -j`. W25X40 protection code tested in a subsequent
commit.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Iaaeabf42c6c62c20debc91afd2cf8671c14244c8
Reviewed-on: https://chromium-review.googlesource.com/258440
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously the EC UART connected to the SensorHub console
was being driven push/pull potentially fighting with a
connected servo. This way servo wins, but at least we
don't drive the line in opposite directions causing a
large current flow.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I02b8e09af6c902b523494b757f4bc7ea4365df2e
Reviewed-on: https://chromium-review.googlesource.com/255954
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
1. Override the panel backlight enable signal from SoC in llama board,
force the backlight off on lid close.
2. Revise the function llama_lid_event to mtk_lid_event, makes more sense.
BRANCH=master
BUG=none
TEST=lid switch to open/close, observe the LCD backlight behavior.
the backlight should be off, when lid is close.
the backlight should be on, when lid is open.
BOARD=llama
Change-Id: Id1bff440c8bb6cee19c82615e916b8a2f2aa62ac
Signed-off-by: Ben Lok <ben.lok@mediatek.com>
(cherry picked from commit a90516b0a5493a55536e29d550f65cc743156710)
Reviewed-on: https://chromium-review.googlesource.com/255441
Reviewed-by: Rong Chang <rongchang@chromium.org>
Modify charge ramp so that when it ramps it ramps from 500mA and
up to the maximum allowed by that supplier. Also modify Samus and
Ryu to use charge ramping for CDP and proprietary chargers due
to the possibility that they may not be able to supply the amount
that is supposed to be guaranteed by their advertisement.
BUG=chrome-os-partner:37549
BRANCH=samus
TEST=test on a proprietary charger, make sure we can ramp. test
a DCP and make sure we also ramp as before.
Change-Id: I08fd43c8f0b21aa54d114fbe5a1296c9556357e4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/256972
Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Clear all lightbar segments first before starting konami sequence.
If currently displaying Google colors, we need this so the start
of the sequence shows up correctly.
BUG=chrome-os-partner:37469
BRANCH=samus
TEST=from S0 with google colors on lightbar, run "lightbar seq konami"
from EC console and make sure 1st and 4th segments are cleared before
starting konami sequence.
Change-Id: I92ba8f29414c279895658167f8d5958fe49ea034
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/256192
Reviewed-by: David Schneider <dnschneid@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
mec1322 projects are running very low on flash space. We don't yet have
a loader to load either RO or RW at runtime, so remove the RO image
entirely. This is a temporary change and should be reverted once we have
a working loader.
BUG=chrome-os-partner:37510
TEST=make buildall -j
BRANCH=None
Change-Id: I8c502ec2bcabf246d5a3ea939f1a8d0c366acd9f
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/256381
Reviewed-by: Vic Yang <victoryang@chromium.org>
Change tap for battery lightbar sequence to not show the last segment
dimmed as a percentage of your battery.
BUG=chrome-os-partner:37335
BRANCH=samus
TEST=use battfake console command to test out every increment of 10%
and use "lightbar seq tap" to show tap.
Change-Id: I4f38d26a8cfbecfa6efc86fcc8751ca8cb34879b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/256191
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Limit input current to 2A when battery is near full and we are using
a charger below the boost bypass threshold in order to prevent
charging noise from the charge circuit.
This also changes the threshold at which 5V ramping is allowed to
90% because this is roughly the threshold at which the battery stops
drawing full current.
BUG=chrome-os-partner:36534
BRANCH=samus
TEST=load onto samus. use battfake EC console command to test
various battery states of charge:
- With zinger, verify that at 20V we never limit input current based
on battery SOC.
- With zinger at 5V, verify that >= 90% we limit input current to
2A, and < 90% it's still 3A.
- With 5V BC1.2 DCP, verify that >= 90% we don't ramp, <90% we do.
Change-Id: I868828b5807572736ea58f62bf3596f6416533d2
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/256072
Reviewed-by: Shawn N <shawnn@chromium.org>
include/motion_lid.h is generally included by board.c in the various boards.
But include/motion_lid.h actually needs host_command.h defined or else
including it in board.c will cause a confusing error.
This probably doesn't show up on other platforms like samus and glimmer
because they define a few custom commands in board.c, but veyron
doesn't need that. motion_lid ought to just include it directly if it really
needs it.
BUG=None, see next commits in the series, they won't compile without this
TEST=See series
BRANCH=veyron
Change-Id: I42e966d891dbbcca7df484b59c9d1bb35d1357bc
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/256696
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Bits 1 and 3 of the control register are read 1, write 1, but RO
firmware may have zero'd these bits. Therefore, always set the bits
high, ignoring the read value.
TEST=Manual on Samus. Starting from .90 RO, flash new RW and verify
BC1.2 charger detection is working.
BUG=chrome-os-partner:37241
BRANCH=Samus
Change-Id: I2f71718f74e50fe9b664dbe3da1578ee4c995136
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/254880
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Previously the USB Stream buffer sizes were fixed at
USB_MAX_PACKET_SIZE (currently 64 bytes). But that
ended up using up too much packet RAM, a very limited
resource. This change makes them configurable and
adds asserts to insure that the sizes are valid for
the underlying hardware.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Verify that USART forwarding on discovery works
Change-Id: Ib19c0dcfa9b16f23c1d72a5a7fc18026ab103f05
Reviewed-on: https://chromium-review.googlesource.com/255232
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously the USART and USB Stream drivers exposed in_stream
and out_stream interfaces, which don't allow for sharing their
queues easily. This change converts these drivers over to the
producer/consumer model and updates the two uses.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Verify that the discovery echo functionality is unchanged.
Change-Id: I29f043ab1712373f638e1621378df98647d736cf
Reviewed-on: https://chromium-review.googlesource.com/252820
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
- battery firmware filename need match with gs:// filename
- changed from "%04X" to "%04x"
- A fix for LGC battery firmware update.
- Add control flags:
F_AC_PRESENT - 1 iff AC is connected.
F_VERSION_CHECK - 1 if do version check
- option to disk version check for stress test.
- Add detail log messages
- Remove old debug flag.
BUG=chrome-os-partner:36310
BRANCH=none
TEST=run ec_sb_firmware_update on glimmer
Change-Id: Iebc15222a7a55a786291ce2d8931e70acc5b3c4d
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/253970
Reviewed-by: Shawn N <shawnn@chromium.org>
Reads to RTC_SSR may be invalid if they occur close to the RTCCLK edge.
As suggested by the datasheet, perform consecutive identical reads to
ensure the read is valid.
BUG=chrome-os-partner:37216
TEST=Manual on Samus. Repeatedly call rtc_read in test function, verify
that RTC_SSR never incorrectly ticks up.
BRANCH=Samus
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ib26fbfab4a07263f638c580066e993675dd8c451
Reviewed-on: https://chromium-review.googlesource.com/254725
Reviewed-by: Alec Berg <alecaberg@chromium.org>
For factory testing, when purposely discharging on AC, don't
automatically detect and unwedged charge circuit.
BUG=chrome-os-partner:37171
BRANCH=samus
TEST=plug in AC and run: "ectool chargecontrol discharge". check
on ec console that battery is discharging. let sit for 3 minutes
and make sure charge circuit unwedge code never runs. run
"ectool chargecontrol normal" and make sure battery starts charging
again.
Also force discharge with "ectool chargecontrol discharge" and then
unplug and replug AC, make sure battery is not charging nor
discharging, then set mode back to normal and make sure we start
charging again.
Tested without this CL and everytime you force discharge the charge
unwedge is activated and messes everything up.
Change-Id: Icc7a504c148e1e08777e7aafce64ff4cc38a32c5
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/254722
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Return host command error codes for EC_CMD_CHARGE_CONTROL instead
of returning the result of EC functions which typically return
element from enum ec_error_list, which is a different error list.
BUG=chrome-os-partner:37171
BRANCH=samus
TEST=make -j buildall
Change-Id: Ia13cc8a2f747ddeafdc059c6e575dcc2f5b20b8d
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/254721
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
