This patch adds an interrupt handler for a tablet switch and an init
hook to enable the interrupt.
The handler does the typical tasks for convertible devices: 1. sets
tablet mode then 2. disables peripherals if tablet mode is on.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=b:77298177
BRANCH=none
TEST=buildall. Verify on Nami.
Change-Id: If7fb5ea15f388d2b6084d800d2bc05efafd1945e
Reviewed-on: https://chromium-review.googlesource.com/1043057
Commit-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Port 0:
TCPC: ANX3429
PPC: SN5S330
BC1.2: PI3USB9281
Port 1:
TCPC: PS8751
Power switch (sink): NX5P3290
Power switch (source): NX20P5090
BC1.2: PI3USB9281
Charger: ISL9238
BRANCH=none
BUG=b:74395451
TEST=make buildall -j
TEST=Did "gpioset EN_PP5000_A 1" before the folllowing tests:
* Plugged adapter to port-0/port-1/both and saw charging
* Plugged USB device to port-0/port-1/both and saw sourcing VBUS
* Plugged adapter to one port and USB device to another port
* Plugged USB disk to port-0 and booted into kernel
* When AP off, not sourcing VBUS to USB device
* Rebooting AP still works
Change-Id: Icde5e24c2cda3d0f2046486528a210af84befcca
Signed-off-by: Tom Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/969701
Commit-Ready: Wai-Hong Tam <waihong@google.com>
Tested-by: Wai-Hong Tam <waihong@google.com>
Reviewed-by: Wai-Hong Tam <waihong@google.com>
Update the fingerprint match event to include the index of the template
which matched.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=poppy
BUG=b:77516790
TEST=on ZerbleBarn, enroll 5 fingers and do matching from the console,
see the proper finger index in the trace.
TEST=on Meowth, check unmodified biod still works for match with the
updated MCU firmware.
CQ-DEPEND=CL:*621808
Change-Id: I5be77ba65ce232989606274aba9a6c20841d533c
Reviewed-on: https://chromium-review.googlesource.com/1047267
Commit-Ready: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Nicolas Norvez <norvez@chromium.org>
Keep the timestamp of the latest power lost. Add a handler to wake
the chipset task to check if power lost stays low for a while (the
time between now and the latest power lost is longer than a period).
BRANCH=none
BUG=b:78455067
TEST=Toggle EC GPIO SYS_RST_L for a low pulse to execute PMIC reset
sequence and verified AP reset but not a transition S0 -> S5.
TEST=Toggle EC GPIO PMIC_KPD_PWR_ODL and SYS_RST_L for a low pulse
(see power_off function) to execute PMIC shutdown sequence and verified
a power-lost transition S0 -> S5.
Change-Id: I8ed789d701e834195865bfdf2d302388d42618d2
Signed-off-by: Tom Wai-Hong Tam <waihong@google.com>
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1028831
Commit-Ready: Wai-Hong Tam <waihong@google.com>
Tested-by: Wai-Hong Tam <waihong@google.com>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This makes the EC listen to the AP_RST_REQ GPIO from AP. The rising
edge interrupts to trigger a hook to call chipset_reset().
As the hook task will be preempted by the chipset task, it adds a
flag bypass_power_lost_trigger to avoid triggering to S5 as the
chipset state machines sees power lost during the reset.
So far the chipset_reset() implementation is to do a cold reset;
will be revised to a warm reset after the PMIC registers are
reprogrammed.
BRANCH=none
BUG=b:74395451
TEST=make buildall -j
TEST=Ran 'reboot' on AP console which toggles the GPIO.
Change-Id: I946cb029541ce018a8ed1ce25681d38998a7f4b6
Signed-off-by: Wai-Hong Tam <waihong@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1023986
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
We add a configuration option to set the minimum shared memory
size (CONFIG_SHAREDMEM_MINIMUM_SIZE), so that the link will fail
if there is not enough IRAM left.
Also, we add 2 macros around shared_mem_acquire, that check, at
build time, that the shared memory size is sufficient for the
allocation:
- SHARED_MEM_ACQUIRE_CHECK should be used instead of
shared_mem_acquire, when size is known in advance.
- SHARED_MEM_CHECK_SIZE should be used when only a maximum size
is known.
This does not account for "jump tags" that boards often add on
jump from RO to RW. Luckily, RW usually does not do verification,
and does not need as much shared memory.
BRANCH=none
BUG=chromium:739771
TEST=make buildall -j, no error
Change-Id: Ic4c72938affe65fe8f8bc17ee5111c1798fc536f
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1002713
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This is the power sequence for rev-0 board. Confirmed the behavior of
reprogramming the PMIC registers to enable the instant reset and
shutdown.
BRANCH=none
BUG=b:74395451
TEST=make buildall -j
TEST=Tried the following cases:
* Cold reset:
$ dut-control cold_reset:on sleep:0.2 cold_reset:off
Result: G3 -> S0
* Long power press to shutdown:
$ dut-control pwr_button:press sleep:8.2 pwr_button:release
Result: S0 -> S5 -> G3
* Long power press to power-on but then shutdown:
$ dut-control pwr_button:press sleep:8.2 pwr_button:release
Result: G3 -> S0 -> S5 -> G3
* Short power press to power-on:
$ dut-control pwr_button:press sleep:0.2 pwr_button:release
Result: G3 -> S0
* Console command: apreset
Result: S0 -> S5 -> S0
* Console command: power off
Result: S0 -> S5 -> G3
* Console command: power on
Result: G3 -> S0
* Console command: apshutdown
Result: S0 -> S5 -> G3
* Lid open to power-on:
$ dut-control lid_open:no sleep:0.2 lid_open:yes
Result: G3 -> S0
Change-Id: Ia9d44b1dccac66b5b580c08c6c1697ef5989b923
Signed-off-by: Wai-Hong Tam <waihong@google.com>
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/969702
Add a state to indicate that a data role is actually disconnected and
notify the board-level data swap function with this state when a cable
is unplugged. This allows the board to clean up and restore any state
that may have been set up with a data role swap.
BUG=b:78308749
BRANCH=eve,poppy
TEST=manual on eve: plug in C-to-C cable, execute data swap on port 0
with 'pd 0 swap data' and ensure the OTG pins are asserted. Then unplug
the cable and ensure OTG pins are now deasserted.
Change-Id: I7d8fff22dd5836b4b5af54f0ede71ee1b6e40b5c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1035423
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
We do not want to erase the OCM flash automatically so we
can ensure that we fix our supply chain issues. Add a command
that will erase the OCM if needed.
BRANCH=none
BUG=b:77658388
TEST=verified command works on yorp
Change-Id: Iaf6ada3b1e223d15ae0d9624bdcc54b90cb33b64
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1035428
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to be able to recover from the AP and Cr50 getting out of
sync, this logging functionality gives Cr50 a way to track the
state changes of the merkle tree so that the AP can be updated to
the current state as long as it has a recent enough copy.
This involves packing the important information so it can be stored
efficiently on flash, and adding the necessary messages for the
replay.
CQ-DEPEND=CL:895395,CL:929430
BRANCH=none
BUG=chromium:809729, chromium:809745
TEST=cd ~/src/platform/ec && V=1 make run-weaver_ng -j
Change-Id: I40f98de2c8e9706cccb5b922215699f2132fa121
Signed-off-by: Allen Webb <allenwebb@google.com>
Reviewed-on: https://chromium-review.googlesource.com/963773
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This connects the pinweaver code to the tpm vendor
specific command code.
CQ-DEPEND=CL:895395
BRANCH=none
BUG=chromium:809741
TEST=TBD
Change-Id: I2a6c4bf52ad77b7bf0395095404e925e1dd48dbc
Signed-off-by: Allen Webb <allenwebb@google.com>
Reviewed-on: https://chromium-review.googlesource.com/929430
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This adds some of the ground work for hardware backed brute force
resistance on Cr50. The feature is called Pinweaver. It will
initially be used to enable PIN authentication on CrOS devices
without reducing the security of the platform. A Merkle tree is
used to validate encrypted metadata used to track login attempts.
The metadata tracks counts of failed attempts, a timestamp of the
last failed attempt, the secrets, and any associated parameters.
Instead of storing the metadata on Cr50 an AES-CTR is used with an
HMAC to encrypt the data so it can be stored off-chip and loaded
when needed.
The Merkle tree is used to track the current state of all the
metadata to prevent replay attacks of previously exported copies.
It is a tree of hashes whose root hash is stored on Cr50, and whose
leaves are the HMACs of the encrypted metadata.
BRANCH=none
BUG=chromium:809730, chromium:809741, chromium:809743, chromium:809747
TEST=cd ~/src/platform/ec && V=1 make run-pinweaver -j
Change-Id: Id10bb49d8ebc5a487dd90c6093bc0f51dadbd124
Signed-off-by: Allen Webb <allenwebb@google.com>
Reviewed-on: https://chromium-review.googlesource.com/895395
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
According to PD spec:
- Data role shall not be reset on soft reset.
- Data role shall be reset to power-role default on hard reset.
Implement the above. Even if both ports follow spec, it's still possible
for a data role conflict to occur if, for example, data role swap occurs
(data role mismatches power role default) followed by a hardware reset
of one port (such that data role gets reset to power role default).
Handle such cases by taking error recovery actions.
BUG=b:71333840,chromium:805040
TEST=Connect scarlet to powered Apple accessory, verify scarlet comes up
in SNK-DFP after soft reset and issuing "reboot" on EC console. After
issuing a hard reset, the port comes up in SNK-UFP (which is the
power-role default).
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I65139f277d59a0612f8323d711080f52425ff5e7
Reviewed-on: https://chromium-review.googlesource.com/885462
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In order to re-initialize our PD state variables properly following a
reset, we need to save our current power role. This commit adds a bit
in the BBRAM PD flags for the power role.
BUG=b:71333840,chromium:805040
BRANCH=None
TEST=Add code to save data role and restore both roles, verify that both
are saved accordingly.
Change-Id: I156ae8179c8e12c63322132d1f0078990bd215f8
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/979264
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
pd_get/set_saved_active() made the assumption that there were only two
ports. But now, we have a board that turned that port count all the way
up to 3. This commit adds in that new port BBRAM index. It also turns
the byte where the port information was stored into a byte of flags,
where bit 0 indicates whether there was an explicit contract in place or
not.
BUG=b:72838807
BRANCH=None
TEST=With some code to check for explicit contract state for port 2,
verify it's functional.
Change-Id: I6f062f67bd3c47dd43ea7e24e844a9286fa37af9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/905923
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Currently, there's only one board with 3 PD ports and it uses NPCX.
Therefore, this commit just adds the index to NPCX which will be used to
save the fact that there was an explicit contract in place.
BUG=b:72838807
BRANCH=None
TEST=make -j buildall
CQ-DEPEND=CL:905390
Change-Id: Ic960f14a52f2a740adbe08bc340c45edfefbbf26
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/905922
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
We need to use the PS8751 as the USB mux without configuring
it as the TCPC. Add mode that allows passing in i2c port
and address instead using tcpc_config_t values.
BRANCH=none
BUG=b:78341944
TEST=build using bip
Change-Id: I45b420ef890dfa8c5e5052864b7a2bb66d8734d6
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1024486
This change adds a callback for chipset_pre_init_callback which is
made by x86 common power state machine when in G3S5 state. Until now,
there was a hook CHIPSET_PRE_INIT_CALLBACK that was notified by
chipset task when in G3S5 state. However, there are at least following
reasons why this should be a callback and not a hook notification:
1. The initialization that is done as part of pre-init could be
essential for the power state machine to make progress. Though the
chipset task goes to sleep waiting for power signals after the hook
notification, pre-initialization can all be done as part of a callback
since it is mostly board-specific code that is doing work to
initialize PMIC.
2. Typically, boards use I2C transactions to setup PMIC on getting
chipset pre-init notification. However, since i2c transfers are not
encouraged in hook task, they have to be deferred anyways.
3. Since the initialization is being done as part of hook task, use of
any constructs e.g. pwr_5v_en_req which allows multiple consumers to
enable/disable power rails will use task id for hook task. Instead it
is better to provide correct information about the task by letting
chipset task perform this request.
Thus, this change adds a callback chipset_pre_init_callback in G3S5
state for x86 power state machine. This callback is guarded by
CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK.
The hook notification is left as is for now until all x86 boards are
moved over to using the newly added callback.
BUG=b:78259506
BRANCH=None
TEST=None
Change-Id: I2e1d73e5308759fef41680ae715ef71268b61780
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1018733
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Now that board version can come from CBI, we can have a real error
reading it. We should pass that error to the console or to the
AP on the host command and let the AP firmware (or user) decided how to
handle that error case
Also update the CONFIG_BOARD_VERSION to be derived instead of needed
in most cases.
BRANCH=none
BUG=b:77972120
TEST=Error reported on EC console and AP console when CBI is
invalid on yorp
Change-Id: Ib8d80f610ea226265a61e68b61965150cdc9bb04
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1015776
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
This commit adds an optional console command that will dump the contents
of the battery charger IC registers. Currently, the only chargers
supported are the BD9995x as well as the ISL923x.
BUG=None
BRANCH=None
TEST=Enable on meowth; Flash; Verify that the command works without any
issues.
Change-Id: I2221efe0ed6e0f6063c97547e0da2d775bf4da45
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/1016004
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
This CL adds support to check if the OCM flash is erased and if not,
will erase it at initialization time. These changes are encapsulated
in a new config option CONFIG_USB_PD_TCPM_ANX7447_OCM_ERASE and this
option is enabled for Yorp boards.
BUG=b:77658388
BRANCH=NONE
TEST=make -j buildall. Tested on a board that hadn't yet been
erased. Verifed the message
"anx7447: OCM flash checked and successfully erased"
was in the EC log, but did not show up on subsequent reboots.
Change-Id: I660e76a9498d3dc1ba821a04317b324f716c5089
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/988414
Commit-Ready: Jett Rink <jettrink@chromium.org>
Tested-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
charge_prevent_power_on() had sections which were gated on the following
CONFIG_* option:
CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT
However, the block of code that this gated didn't even take the battery
percentage into account and made it very confusing as to why.
This commit simply changes the CONFIG_* option used to gate to be the
following:
CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON
This better reflects the checks that were actually being made.
Additionally, this CONFIG_* option is defined by default for boards that
have a chipset task and is initialized to 15W, which is the power that
indicates that the charger is likely to speak USB PD.
BUG=b:76174140
BRANCH=None
TEST=make -j buildall
Change-Id: Ic9158dd7109ce6082c6d00157ff266842363b295
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/977431
Commit-Ready: Aseda Aboagye <aaboagye@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
When using VBUS_DETECT_TCPC the charger code relied on the TCPC
alert to initialize the VBUS supply, but that happens too late in
board startup sequence to allow an initally plugged in USB-C power
supply to be chosen as the active charging port.
We can and should initialize the the supplier sooner as to prevent
the charge_manager_is_seeded() check from failing thus preventing
the board from choosing a charging port.
BRANCH=none
BUG=b:77458917
TEST=PS8751 on yorp will negotiate 20V over USB-C (which was prevent
by the charge_manager not being seeded)
Change-Id: I6f612c508932a90ece0036ce8310a20de02d8467
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/994707
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Tested-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The ANX7447 has a sink/source control lines which can be connected to
a PPC. The NX20P3483 PPC requires this control to set it's sink/source
switch control. The ANX7447 contols these lines via the tcpci COMMAND
register. This CL adds new tcpm_set functions to set either SNK or SRC
control via the COMMAND register.
BUG=b:77583452
BRANCH=NONE
TEST=Tested on port 0 of Yorp with an external charger. Prior to this
CL the PPC would remain in standby state because both snk/src control
remained low. With these changes, verifed that snk_ctrl is driven high
and vbus_sink_enable() function no longer returns an error.
Change-Id: Icbea0d3edb63ad19f3d2c76636208497b6939a72
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/996239
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
It is important for the OS to be able to find out the state of CCD and
current capabilities settings of the device.
This patch defines a structure to use to report information about CCD
state from Cr50 to the host and adds a CCD vendor subcommand to allow
to retrieve the information from Cr50.
Some structure and variable definitions had to be moved into the .h
file to make it possible to share them between Cr50 and gsctool.
BRANCH=cr50, cr50-mp
BUG=b:72718383
TEST=with the following patch applied verified that CCD info is
properly reported. Also verified that other CCD subcommands still
work as advertised.
Change-Id: I4a783e6817ed364b9e64522ebbe968d4a657a84c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/999825
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Port 0 uses the Anx7447. This CL updates the tcpc config to use the
Anx7447 driver instead of the Anx74xx driver.
BUG=b:74127309
BRANCH=NONE
TEST=make -j BOARD=yorp and verified that when connected external type
C charger to port 0 it reaches SNK_READY
Change-Id: I96967a1d272fcda079280ba6d2f0eb5ed8e3dd7f
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/982894
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
This patch adds execution-in-ram, opposite of XIP: execution-in-place
(a.k.a. XIP) to the EC features. It can be currently implied by
CONFIG_EXTERNAL_STORAGE.
BUG=b:77306460
BRANCH=none
TEST=Verify ectool prints EXEC_IN_RAM on Fizz.
Change-Id: I4a7fb3b267864debe59fd211956371eceac57613
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/995968
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Use RMA public key definition generated based on the binary blob
containing the key and key ID.
Key generation is controlled by the make file in common/, but actual
key blob comes from the board directory.
The structure holding the key and key ID is being modified to allow
initialization using a flat array.
No more need in defining CONFIG_RMA_AUTH_SERVER_PUBLIC_KEY and
CONFIG_RMA_AUTH_SERVER_KEY_ID.
BRANCH=cr50, cr50-mp
BUG=b:73296144, b:74100307
TEST='make buildall' still succeeds.
test RMA server generated authentication codes are accepted when
unlocking RMA.
Change-Id: I8ade94de6eb69b3e49bc5b948dbac20e59962acf
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/990783
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The semantics in the EC code base are that CONFIG_INTERNAL_STORAGE
implies eXecute-In-Place semantics (XIP). Add a comment to make that
abundantly clear.
BUG=none
BRANCH=none
TEST=none
Change-Id: I80152eeb41dd35716f4c09ffd1753ae128aa7d2d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/995956
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Majority of the chipsets do not have a dedicated GPIO to trigger
AP cold reset. Current code either ignores cold reset or does a warm
reset instead or have a work around to put AP in S5 and then bring
back to S0. In order to avoid the confusion, removed the cold reset
logic and only apreset is used hence forth.
BUG=b:72426192
BRANCH=none
TEST=make buildall -j
Manually tested on GLKRVP, apreset EC command can reset AP.
Change-Id: Ie32d34f2f327ff1b61b32a4d874250dce024cf35
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/991052
Commit-Ready: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Tested-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
This is a specific option for it83xx chip and is used to
include EC2I module.
And we won't need it without LPC module enabled, so just
depend on CONFIG_LPC.
BUG=none
BRANCH=none
TEST=make buildall -j, boot to kernel on reef_it8320.
Change-Id: I1aa4a182e94d802dbf9ca19cc4a47ef9542d74a7
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/987674
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Tell the base to hibernate when we are in S5, and no AC is connected.
Also, wake the base when AC status changes (S5), and when the system
transistions out of S5.
BRANCH=none
BUG=b:71874971
TEST=1. Lid EC console: apshutdown => Check that Base EC hibernates
2.a. Lid EC console: powerb; => Check that base reconnects
2.b. Connect/disconnect adapter: check that base disconnects
and reconnects
Change-Id: I5e9a4afc64a07ad92f37d171a78a914d26f07c8e
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/958814
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Allows the lid to hibernate the base.
BRANCH=none
BUG=b:71874971
TEST=With following change, lid hibernates the base when in S5,
and no AC is connected.
Change-Id: I8c8017d638442ba8b17c8117d0b1b31f3538925f
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/981914
Reviewed-by: Randall Spangler <rspangler@chromium.org>
No one is using this method and it implies that all chipset should
support the RCIN# Virtual Wire if using eSPI. Only large core chips
use RCIN#; small core chips don't.
This method was introduced for skylake and has since been replaced
since CL:575947 was merged.
BRANCH=none
BUG=none
TEST=build all
Change-Id: Ic541e3d61d1e0ecc64a0bb12385bdada40f0acf2
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/975904
We have a growing list of boards in chip/npcx/system.c that are
unable to distinguish a reset from a power-on or a reset-pin type.
Instead of being a temporary issue this is now solidified in the
design on some kabylake boards.
Instead of defining board-specific checks in the chip code this
change adds a config option that the relevant boards can define.
BUG=b:76232539
BRANCH=none
TEST=make -j buildall passes
Change-Id: I76e0f011d70ce6f778b1fb6a56c2779c39c3cbd6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://chromium-review.googlesource.com/979575
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
The keyboards that have an assistant key also move the row that
the refresh key is on from 2 to 3. The row is hardcoded and
used by the early boot key detection code to determine if
boot keys should be honored.
The fallout from not having the right refresh row defined was
not seen on Eve because that board has a different quirk where
it does not distinguish reset-pin vs power-on reset types so
the test in check_boot_keys() was not failing.
BUG=b:76232955
BRANCH=none
TEST=manual testing on Eve board
Change-Id: I5b94b4e32024afa1768bdf371a7eb951753014e8
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://chromium-review.googlesource.com/979574
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Since all of the uses of CONFIG_USB_PD_TCPM_ANX74XX are actually for
ANX3429, rename the option especially since the ANX7447
driver will not reuse the ANX74XX driver which is being introduced
in CL:956790.
Also adding the CONFIG_USB_PD_TCPM_ANX740X and
CONFIG_USB_PD_TCPM_ANX741X options to advertise which versions of the
ANX chip the anx74xx.c driver applies to.
BRANCH=none
BUG=chromium:824208
TEST=build all
Change-Id: Ib47f4661466e54ff2a0c52d517eb318d3bfd25a2
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/973558
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
The NX20P3483 is a USB PD and Type C high voltage sink/source combo
switch. This CL adds support for this PPC variant. Unlike the TI
SN5S330, the NX20P3483 does not support VCONN and does not need to be
informed of CC polarity by the TCPM. To account for these differences,
2 new PPC config options are added and the driver for the TI SN5S330
was modified to include these new options.
The SNK/SRC switch mode for the NX20P3483 is controlled by 2 GPIO
signals which may be connected the EC or directly to the TCPC. To
handle both cases, the ppc_chips structure was modified with a flags,
snk_gpio, and src_gpio elements.
BUG=b:74206647
BRANCH=none
TEST=make -j buildall and verified there are no build errors.
Change-Id: Ic4415ab7571b80e7661ea673434eaf4cf1f1fd2d
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/966926
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
This change adds a new config option CONFIG_I2C_XFER_CALLBACK that
makes i2c_xfer callback into board-provided functions before the start
and after the end of every I2C transaction. This can be used by boards
to implement any I2C device-specific quirks e.g. requiring minimum
bus-free time between every I2C transaction when the slave device
cannot actually do clock stretching.
BUG=b:73147310
BRANCH=None
TEST=make -j buildall
Change-Id: I452de4f22a81ffd97ca4944e1b940a3537637df9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/956934
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
