This wraps the EC_HOST_EVENT_THROTTLE_START/STOP host events in a new
function called host_throttle_cpu(), similar to chipset_throttle_cpu().
That function requests the AP to throttle itself, which is less drastic than
just smacking it down from the EC.
BUG=chrome-os-partner:20805
BRANCH=falco,peppy
TEST=manual
This is a refactoring change only. All boards should still build, all tests
should still pass.
Change-Id: I871cce8f0e13230cb52eeb5e16955266f8461374
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63909
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We've been declaring a bunch of statically-sized arrays:
extern struct foo_t foo[FOO_COUNT];
And then initializing them like so:
struct foo_t foo[FOO_COUNT] = {
/* blah */
};
That only catches cases where we initialize with too many entries. It
doesn't catch cases where we haven't initialized enough. This change tests
for both cases like so:
extern struct foo_t foo[];
struct foo_t foo[] = {
/* blah */
};
BUILD_ASSERT(ARRAY_SIZE(foo) == FOO_COUNT);
The affected arrays are:
adc_channels[ADC_CH_COUNT]
gpio_list[GPIO_COUNT]
temp_sensors[TEMP_SENSOR_COUNT]
x86_signal_list[X86_SIGNAL_COUNT]
i2c_ports[I2C_PORTS_USED]
BUG=chrome-os-partner:18343
BRANCH=falco,peppy
TEST=build all platforms
All platforms should still build, all tests should still pass.
Change-Id: Ibb16dc3201f32df7cdc875648e89ba4ffb09f733
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63833
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This got dropped during some of the recent clean up.
BUG=None
BRANCH=slippy
TEST=Manual. Check that the LED on slippy is working.
Change-Id: I80505c5df72410c9f25521d0c116fc59da5cb1db
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63886
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Before this change, powerinfo host command supports only one target
with USB charging. This change adds a common powerinfo host command
and console command for TPSChrome based targets.
BRANCH=None
BUG=chrome-os-partner:20326
TEST=manual
build and flash pit target, check console command 'powerinfo'.
check ectool powerinfo with and without AC adapter.
Change-Id: I2cfd8dfa011e23f819c6bae19cf22b4a7343f044
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63350
Reviewed-by: Vic Yang <victoryang@chromium.org>
There are a few issues with console output:
1. The EC was returning more bytes than the message's insize. The
reason stems from a refacotring that the set the global
ec_max_insize variables to 'EC_PROTO2_MAX_PARAM_SIZE - 8'.
It really should be EC_PROTO2_MAX_PARAM_SIZE to cover the
maximum packet size returned from the EC.
2. A change was made to handle EAGAIN returning from the EC kernel
driver's ioctl() interface. That change prevented 0 bytes received
from being returned properly.
The first issue occurs because the EC console is always larger than
what the original ec_max_insize was set to. This caused no console
messages to be displayed. The second issue causes the console command
to potentially loop forever because the drain of the EC console is
never indicated because 0 could never be returned.
BUG=chrome-os-partner:21165
BRANCH=falco,peppy
TEST=Built and can now read 'ectool console' output as well
as not including gargabe.
Change-Id: I3114594f0020a5198532aa78ce126f4da6caf09a
Reviewed-on: https://gerrit.chromium.org/gerrit/63445
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Occasionally the EC wants to ask the AP to throttle itself. Currently, the
only thing that the EC can do (at least on x86) is to assert the PROCHOT#
signal, which is a fairly intrusive operation and one that Intel suggests we
save for emergencies.
This CL adds a new pair of host events to ask the BIOS to throttle the AP
politely, or stop doing so. The turbo charger code will send these events to
the AP if they become necessary.
BUG=chrome-os-partner:20739
BRANCH=falco,peppy
TEST=manual
Tests should still pass, everything else is unchanged.
make BOARD=${BOARD} runtests
Currently, there's nothing on the BIOS/OS side that would respond to these
events, so they're just ignored. You can test that, even without this CL, by
running
hostevent set 0x40000
hostevent set 0x80000
Change-Id: I4a7a1b6eb87e42df94ddd09f4c6abee6ebcbd485
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63379
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The Silego chip has a 50k pulldown which will leak power if we leave
EC_ENTERING_RW high. We don't need to leave it high, because once the
latch in the Silego gets set it ignores this signal. This is ~100uA,
so it only really matters in S5 on pit (since x86 boards and spring
both hibernate in S5).
BUG=chrome-os-partner:20757
BRANCH=none
TEST=probe ec_in_rw signal before/after sysjump
Change-Id: Ib6b09cfc7718b35e4e93c952c3098c08d53572e2
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62133
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Some chargers can run in a "turbo" mode, which lets it draw from the battery
to provide extra power to the AP in short bursts. In order for this to work
properly, the EC has to watch the current closely to make sure specific
limits are observed. It also has to recognize specific adapters, since those
limits vary depending on the rated power that the adapter can provide.
This adds the basic functionality, plus a test for it.
BUG=chrome-os-partner:20739
BRANCH=falco,peppy
TEST=manual
make BOARD=${BOARD} runtests
On Falco, you can also use the "adapter" EC command to see what's going on.
Try replacing the adapters and running that command to be sure they're
correctly identified, too:
> adapter
Adapter 65W (590mv), turbo 1, AP_throttled 0
>
We currently support 45W, 65W, and 90W adapters. Unknown adapters are
treated as 65W, but don't enable turbo mode.
Change-Id: I7e5407db825ce7e596cb495fb8cb4d1dd1ff639c
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63372
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We can't change CONFIG_ options from the gcc commandline, because
include/configs.h explicitly undefs them again. So for some tests, we add a
-DFOO to the command line and then put this in the source:
This change just uses TEST_FOO instead of FOO, so it's more obvious what's
happening.
BUG=chrome-os-partner:20739
BRANCH=falco,peppy
TEST=manual
No functional change, just renaming. Run
make BOARD=${BOARD} runtests
Everything should still pass.
Change-Id: I17e10180f8d779dff0961cf411f5b61cfc70c316
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63371
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Rename onewire_led to led_driver_ds2413, since we may have other LED
drivers hanging off a one-wire bus in the future.
No functional changes, just renaming config options.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I1d70b1c5778da94bda4ebef3b57f7c39bfba2322
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63273
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
CONFIG_FMAP is now defined by default, because all platforms other
than the host unit tests use it.
No functional changes, just renaming config options and removing dead code.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Ie6496310c822491068e2fa6976933486f26badb0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63271
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
If we are hibernating indefinitely, just exit with hibernate exit code.
If hibernating with a delay, delay for that amount of time and then
reboot.
BUG=chrome-os-partner:19235
TEST='hibernate 1' and see emulator reboot after a second with reset
flag 'hibernate'
BRANCH=None
Change-Id: If25bf2eefbcf275f2592b92a997a9d7e1ff2384d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62970
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
With this, the emulator is able to reboot itself without the help of
run_host_test script. This makes it easier for development and also
speeds up the test.
BUG=chrome-os-partner:19235
TEST=Pass all tests
BRANCH=None
Change-Id: Ifa510442de19256c671ab91b6bc75fe9e8b9dc7b
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62969
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
To create a token by concatenating already-defined macros and new
text, it's necessary to use multiple levels of macro. We'd already
done that in several places in the code such as STM32_CAT; this now
standardizes it into a single place.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=Build all platforms; examine ec.RO.map to see that irq_*_handler and prio_* symbols
evaluated the same as before. (Other macro evaluations would simply fail to compile
if they were incorrect, since the concatenated tokens wouldn't fully expand.)
Change-Id: Ic9bf11d27881a84507fe7b6096dab6217c6c6dc7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63231
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
As the number of boards grows, it's handy to have a script which
builds them all and runs host-based unit tests, to make sure that
changes are at least somewhat sane before submitting them to the
commit queue.
BUG=none
BRANCH=none
TEST=util/make_all.sh
Change-Id: Ie3fcb062caedaf36b3e350c3d9be34a9b080c76d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63230
Reviewed-by: Rong Chang <rongchang@chromium.org>
This change moves vendor specific temperature ranges to battery pack
files or board setup files. And added a host test case to verify that
does not change x86 smart battery charging state machine behavior.
BUG=chrome-os-partner:21181
BRANCH=None
TEST=manual
build test: util/ecmakeall.sh
hosttests: make hosttests && make runtests
Change-Id: I48e76826b5555f64b78e3c063ce5f02416c72aa2
Signed-off-by: Rong Chang <rongchang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62978
Reviewed-by: Vic Yang <victoryang@chromium.org>
The preliminary bolt support allows the board to boot
with all the necessary peripherals working except for the
following things:
- Not all board temp sensors are added.
- WLAN is not powered on because of inrush issues.
- USB power chargers are fixed to normal mode for now.
BUG=chrome-os-partner:20372
BRANCH=None
TEST=Built and booted
Change-Id: Iea7a39e812bb396e5731f212630b7fe97c164bf2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62210
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add a CONFIG_CHIPSET_X86 option that determines if
chipset_x86_common.o is built.
BUG=chrome-os-partner:20372
BRANCH=None
TEST=built bolt and link. All other boards should be covered.
Change-Id: I980a8fc68a31162b920429e695631909c5f6a4db
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63208
Reviewed-by: Randall Spangler <rspangler@chromium.org>
No functional changes, just renaming config options.
Remove README, now that all options described in it have been moved to
config.h, and the remaining information is out of date. (Yes, we
should have a README which describes the organization of the EC
repository, but that's a matter for another CL; this one's about
cleaning up config options.)
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Iafefbe94369f1217c698f11d358bc0ecac2bdfde
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63145
Reviewed-by: Vic Yang <victoryang@chromium.org>
All of these were defined on all but a few platforms, and those
explicitly #undef them. So define them as enabled by default in
config.h so the board.h files are cleaner.
No functional changes; just rearranging/renaming config constants.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms; FEATURES=test emerge-falco chromeos-ec
Change-Id: I1201a1472ae29641e9e219c2a0347691ca64cd28
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/63102
Reviewed-by: Vic Yang <victoryang@chromium.org>
1. The buffer for host i8042 command is too small so that a command
is dropped (buffer full) in some cases. Enlarging it can solve bug.
2. The keystrokes are queued in buffer so that kernel driver cannot
get stable CTR value. We workaround this by disabling the keystroke
and clearing buffer when keyboard is disabled.
BUG=chrome-os-partner:20758
BRANCH=falco,link
TEST=Verified on link. Repeatedly press Ctrl + U during booting.
The keyboard is working after boot.
Change-Id: I7d8daef8d815b8e4d08df6f6a26ab2a471e5b150
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62986
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@chromium.org>
Tested-by: Duncan Laurie <dlaurie@chromium.org>
Reset flags should be set properly according to reset type. Also, on
system jump, current time should be preserved.
BUG=chrome-os-partner:19235
TEST='sysjump rw' and check time is the same.
TEST='reboot hard' and see '[Reset cause: hard]'
BRANCH=None
Change-Id: I00fd2c652d10c237f23cc6a33e0b667422bc625d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62958
Reviewed-by: Randall Spangler <rspangler@chromium.org>
No functional changes, just documenting and renaming.
All boards which use the PMU must provide pmu_board_init(). This was
already true - except that Daisy's pmu_board_init() was implemented as
part of pmu_init() instead of its code living in board.c; I've moved
the code there now.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I85ad06dc3b6287ad917fe13acf83182f24a8f23d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62906
Reviewed-by: Vic Yang <victoryang@chromium.org>
No functional changes, just documenting and renaming.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: I0b0d3cdce535d90ce437e82e96346fc3ca9be7b0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62673
These are now described in config.h. The various BQ chargers now also
use a consistent naming for their sense resistor options.
No functional changes, just renaming, and removal of obsolete
never-defined configs.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms
Change-Id: Ie274546fe45f5ffc6fd0f26096c4622805baf8a0
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62540
BUG=chrome-os-partner:21180
BRANCH=slippy
TEST=Run ectool chargecontrol command with each option (normal,
idle, discharge) on Slippy. Verifiy battery is discharging
in discharge mode via EC console 'battery' command.
Signed-off-by: Dave Parker <dparker@chromium.org>
Change-Id: I0461b20fc15c99380327b9a282efff7f1ed93baf
Reviewed-on: https://gerrit.chromium.org/gerrit/62851
This lets us read the internal and external values on the
G781 temp sensor.
BUG=chrome-os-partner:21180
BRANCH=slippy
TEST=run ec 'temps' command on Slippy.
Change-Id: Ib3a2a89efd4cfbc4a49696c79daa37bc1880a3ef
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62847
Reviewed-by: Randall Spangler <rspangler@chromium.org>
flock leaves the lock file and git complains about it. Let's move the
lock file to /tmp/ec-lcov-lock.
BUG=chrome-os-partner:19235
TEST=make coverage and check .lcov_lock is in /tmp
BRANCH=None
Change-Id: Id6d68af327b53aa1c0c7ae9186149126d8a5cc37
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62858
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The version struct and EC_CMD_GET_VERSION assume 32-character version
strings. But if the git tree is dirty and the board name is long, the
version string overflows that limit.
This change truncates what's stored in the version string to fit.
The build info still contains the full version string, as it did before.
BUG=chrome-os-partner:21156
BRANCH=none
TEST=build BOARD=mccroskey with a dirty tree; it should build.
Then cat build/mccroskey/ec_version.h to see CROS_EC_VERSION32 has
truncated the version string. Then build a platform of your choice
and type 'version' to see that the version string and build info is
still reported correctly.
Change-Id: Ie71b8efd99a83315f8b4d5ad10c51e48781b12f4
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62649
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Add an enum for the number of flash regions so we can keep track of all
the possible regions.
(This is used in U-Boot which wants to declare an array of all possible
regions.)
BUG=chromium:244019
BRANCH=none
TEST=manual
Build EC for pit.
Change-Id: I494d857f1388dcc5c64b1cd580cf0084bdef0212
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62701
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:20863
BRANCH=falco,peppy,slippy,wolf
TEST=Manual. On Peppy, there should no longer be "Charging
Voltage" messages every second on the EC console. On other platforms
verify that V_Batt reported by the 'charger' command is divisible
by 16.
Change-Id: Idd775a1d8033ff3405d10919e1e15ddddebc6c23
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62699
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:20889
BRANCH=peppy
TEST=Power device without battery. It should boot with no 30
second delay. The battery LED blinks orange indicating a
battery error.
Change-Id: Iea4f5644ae223b60dc8058dc52e06405e275c001
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61820
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Marc Jones <marc.jones@se-eng.com>
Expands and renames ectool 'chargeforceidle' command to
'chargecontrol'. Board-specific calls are needed to enable and
disable the discharge while on AC power state.
BUG=chrome-os-partner:20506
BRANCH=falco,peppy
TEST=Run ectool chargecontrol command with each option (normal,
idle, discharge) on Falco and Peppy. Verifiy battery is discharging
in discharge mode via EC console 'battery' command.
Change-Id: I7ac2b18b4f143bf6abc1e0bb878ad21a99f52100
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/60689
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds two new fields: the ideal write size for best EC flashing
performance (e.g., page mode instead of word mode), and a flags field
with a flag to indicate whether the EC erases its bits to 0 or 1.
The EC still supports the old version 0 command, since u-boot and
flashrom expect that to work.
BUG=chrome-os-partner:20973
BRANCH=(all haswell); this will speed up flashing and software sync
TEST=ectool flashinfo
1. old EC, new ectool -> only reports version 0 info
2. new EC, old ectool -> only reports version 0 info
3. new EC, new ectool -> reports new fields
Change-Id: I484327fe22a58d2b69d7f6ac767b2d3e81b3e0b7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62378
Reviewed-by: David Hendricks <dhendrix@chromium.org>
The curent code ends up creating a veneer for interrupt_enable/disable()
which isn't really needed (see below). By calling the interrupt code while
still running from flash we can avoid this.
I cannot see any problem with the current implementation, but it seems that
with this patch I also avoid an exception.
BUG=chrome-os-partner:20976
BRANCH=none
TEST=manual
Build EC and see code generated like this:
200029ec <iram_flash_write>:
200029ec: b538 push {r3, r4, r5, lr}
200029ee: 460d mov r5, r1
200029f0: 4604 mov r4, r0
200029f2: f000 f83d bl 20002a70 <__interrupt_disable_veneer>
...
20002a4a: f000 b809 b.w 20002a60 <__interrupt_enable_veneer>
20002a4e: bf00 nop
20002a60 <__interrupt_enable_veneer>:
20002a60: b401 push {r0}
20002a62: 4802 ldr r0, [pc, #8] ; (20002a6c <__interrupt_enable_veneer+0xc>)
20002a64: 4684 mov ip, r0
20002a66: bc01 pop {r0}
20002a68: 4760 bx ip
20002a6a: bf00 nop
20002a6c: 080007f5 .word 0x080007f5
20002a70 <__interrupt_disable_veneer>:
20002a70: b401 push {r0}
20002a72: 4802 ldr r0, [pc, #8] ; (20002a7c <__interrupt_disable_veneer+0xc>)
20002a74: 4684 mov ip, r0
20002a76: bc01 pop {r0}
20002a78: 4760 bx ip
20002a7a: bf00 nop
20002a7c: 080007f1 .word 0x080007f1
With this patch the veneers go away.
Change-Id: Idfe173b4c8d45a142914b2388bcff8ba708c657c
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/62243
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
There's nothing LM4-specific about the switch module; it's just
checking GPIOs and updating a memory-mapped register.
No code changes; just moving a file.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=verify switch.c is compiled for link and falco, but not pit or spring
Change-Id: I186f3aac1405c7ba8d94b47bb2586c2ad191daba
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61930
Power button logic is common across all platforms and is not
LM4-specific, so move it to its own module. Switch.c will eventually
be moving to common/ and will common across all platforms (not just
x86), and splitting out the x86 power button logic is needed before
that too.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=manual
1) power on system with both lid and power button.
2) power+refresh -> reboots
3) power+refresh+esc -> recovery mode
4) power+refresh+downarrow -> reboots, AP stays off
5) toggling recovery GPIO via servo should generate SW debug output
showing bit 0x10 toggling
Change-Id: I07714e2c035dceece66f90407983397d2697e7d5
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/61780
