Enabled lid angle calculation. Clamshell/Tablet mode is decided by lid angle.
Accelerometers are set to be active in S3 also.
Trackpad is enabled/disabled by GPIO TP_INT_DISABLE.
Keyboard scan and trackpad are enabled in clamshell mode and disabled in
tablet mode.
Removed enable_keyboard() since keyboard is enabled in clamshell S0 and
S3.
BUG=chrome-os-partner:41353
TEST=Verify in clamshell mode, system can be waken up from S3 by keyboard/trackpad;
And not tablet mode.
BRANCH=None
Change-Id: Ic5fb5a562e8426288eae2fb9815a213fe5033955
Signed-off-by: li feng <li1.feng@intel.com>
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/287341
Reviewed-by: Shawn N <shawnn@chromium.org>
This patch adds a module which runs on top of the SPS driver and
implements the TCG SPI TPM protocol.
Basic register read and write functions are implemented as well as
rudimentary TPM state machine (claiming/releasing locality).
An enhancement is made to the SPS driver to ensure that when the CS is
deasserted the transmit FIFO is reset too, on the off chance of the CS
going away mid transaction for whatever reason.
In this implementation the slave is guaranteed to stall the master for
a few bytes in both receive and transmit transactions, which is
further aggravated by the fact that RX FIFO threshold is set to 8
(this is the minimum number of bytes the master has to send to wake up
the slave). This could be fine tuned later, for instance made a
parameter of the receive callback registration function.
BRANCH=none
BUG=chrome-os-partner:43025
TEST=trunksd initialization (with minor changes to accommodate new
VID/DID and some status bits, to be published) succeeds with the
cr50 connected to the USB/SPI cable.
Change-Id: I28d37c3b57dde9adf59e81426efe4f58880cf0b0
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/285252
math library can be set independentely.
It is implied when motion sensor drivers are compiled in.
BRANCH=smaug
TEST=Build strago board specific tests, host test and ran
ryu image.
BUG=chromium:512329
Change-Id: I743ea7b44e4a3783602c11f3928cb3fa4b105ec4
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/287371
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This commit adds the 8042 scancodes to the shared objects library saving
504 bytes from the RW image. To enable the space savings, define
CONFIG_SHAREDLIB in the target's board.h file.
BUG=none
BRANCH=none
TEST=make -j buildall tests
TEST=Built samus EC image and verified keyboard still worked in RO and
RW.
TEST=Built samus EC image with CONFIG_SHAREDLIB enabled and verified
that the keyboard still worked in RO and RW.
TEST=Enabled CONFIG_SHAREDLIB for glados and cyan and watched build
fail.
CQ-DEPEND=CL:275344
Change-Id: I1241506c6b34d63e270677d4e8d0531a8a4236c9
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://chromium-review.googlesource.com/276212
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Commit-Queue: Aseda Aboagye <aaboagye@chromium.org>
Create driver/tcpm/ folder to hold TCPM drivers. Currently the
two drivers are a stub driver which is used when TCPM and TCPC
are on the same MCU and can make direct calls between the two
and the TCPCI driver which implements the standard TCPCI protocol.
BUG=chrome-os-partner:41842
BRANCH=none
TEST=make -j buildall
Change-Id: Ie4d9b36eb33155254f8b87b83861f98a7a80693a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/281630
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Modify PDCMD task to allow for TCPCs that do not support host
commands.
CONFIG_HOSTCMD_PD is a new config option to be used by TCPCs
that implement our host command protocol such as the PD MCU on
glados and oak. Otherwise, the PDCMD task will not send host
commands and will be used simply to check TCPC interrupt status.
BUG=none
BRANCH=none
TEST=test on glados and samus and make sure we can send host
commands from the EC to the PD and that we can negotiate a PD
contract.
Change-Id: I618badb5db3f9e490ae4eedfdb2a0c54513496ff
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/278215
Reviewed-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The in_stream and out_stream interfaces were a first attempt
at providing an abstraction for multiple stream like devices
(usart, USB, I2C/LPC host interfaces...). But, by baking
the queue into the device it proved to be hard to use and
required additional resources (task or deferred hook) to handle
passing data from one stream to another.
Since then the queue policy and producer/consumer interfaces
have replaced the stream interfaces. This CL removes the old
stream interfaces and updates the only users (deleting the
test echo code from the discovery-stm32f072 board and updating
the mcdp28x0 driver to use the queue interfaces).
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: Ic0d2abf81eafc4fb2e61172540151f2d0ba45caf
Reviewed-on: https://chromium-review.googlesource.com/276163
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Move the task responsible for detection of USB chargers to common code
to reduce code duplication.
BUG=chrome-os-partner:40920
TEST=Manual on samus_pd. Plug USB charger, verify detection is correct
on both charge ports.
BRANCH=None
Change-Id: I362f8b5b51741509e459c66928131f1f6d2a3b1d
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276210
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Now that we've removed boards from ToT, also delete board-specific
code used only by the removed boards.
There are still more things to remove (unused charging chips, LED
drivers, COMx support). More CLs coming.
BUG=chromium:493866
BRANCH=none
TEST=make buildall -j
Change-Id: Ie6bdeaf96e61cadd77e3f6336c73b9b54ff4eabb
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276524
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This adds a new task and endpoints to handle large opaque (to the
USB) chunks of data. The expected use case is that the USB
endpoint accepts bytes from the host and passes them blindly to
the blob-handling task. At some point, the blob-handling task may
wish to send bytes back to the host. What those bytes are and
what they mean is determined at higher levels of abstraction.
BUG=chrome-os-partner:40969
BRANCH=none
TEST=make buildall
This CL doesn't enable the blob-handler; it just makes it
available. The next CL will enable and test it.
Change-Id: I6eba8e8010466e71efe9c5e06848b9f403df835f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/275131
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously the Producer and Consumer interfaces tracked the
Consumer and Producer respectively at the other end of the
queue that they interacted with. This was done to avoid
modifying the queue implementation, but resulted in a rougher
interface that required additional initialization steps and
prevented alternative configurations; many producers and one
consumer for example.
This commit uses the new queue policies to track this
information. The new direct policy behaves as the old producer
and consumers did. Now the producers and consumers are just
named references to the queue that they work on and a convenient
location for a notification callback when the queue is updated in
a way that is relevent to the producer or consumer.
All users of Producer and Consumer have been updated including the
stream adaptors which are in use by the echo test code and the
mcdp28x0 driver. Use of the stream adaptors has also been
simplified.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Manual testing of Ryu (P5) and discovery board echo task
Change-Id: I704be6378a31b4e20f5063295eff9943e4900409
Reviewed-on: https://chromium-review.googlesource.com/271792
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Add config options for various parts of USB PD stack:
CONFIG_USB_POWER_DELIVERY: The use of this option has changed
slightly. It now represents whether or not to include the USB
PD protocol and policy layers of the software stack.
CONFIG_USB_PD_TCPC: Compile in type-C port controller module
which performs the phy layer of the PD stack.
CONFIG_USB_PD_TCPM_STUB and CONFIG_USB_PD_TCPM_TCPCI: If
CONFIG_USB_POWER_DELIVERY is defined, then one TCPM needs to
be defined to declare which port management module to use
to drive the TCPC.
BUG=none
BRANCH=none
TEST=make -j buildall
Change-Id: I41aa65a478e36925745cd37a6707f242c0dfbf91
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270171
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Initial split of the USB PD protocol code to create the new port
controller (TCPC) and port management (TCPM) blocks. The intention
is that the TCPC code will eventually reside on a different MCU,
along with the USB PD phy layer. The TCPM will stay with the protocol
and policy layers and provide a standard interface to TCPC (over
i2c).
As a first step, this CL merely splits up the files and directly
calls functions to reach across between TCPM and TCPC.
BUG=none
BRANCH=none
TEST=tested on samus using zinger, hoho, another samus, donette,
and a third party PD charger. Tested the following:
- dual-role toggling
- forming a connection as a source and as a sink
- power negotiation at different voltages
- charging
- sourcing power to USB stick
- soft reset
- hard reset
- power swap
- data swap
- bist mode 2
- zinger remote firmware updates
Change-Id: I70bd68a003c81e075310913f10351b792f76d7e0
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/266923
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Previously we defined separate functions to map registers to protect
ranges for each supported SPI ROM. This change instead adds a protect range
table + flags for each supported SPI ROM and adds common functions for
translation between ranges + registers. This makes supporting new parts
easier. Since we will never use most supported protection ranges, we can
even simplfy the tables.
The implementation is now similar to flashrom.
BUG=chrome-os-partner:37688
TEST=Manual on Glower.
flashwp disable + spi_flash_rsr --> 0
flashinfo --> shows no protection
spi_flash_prot 0 0x10000 + spi_flash_rsr --> 0x24
flashinfo --> shows 64KB protected
spi_flash_prot 0 0x20000 + spi_flash_rsr --> 0x28
flashinfo --> shows all 96KB protected
spi_flash_prot 0 0x40000 + spi_flash_rsr --> 0x2c
spi_flash_prot 0 0x80000 + spi_flash_rsr --> 0x10
spi_flash_prot 0 0 + spi_flash_rsr --> 0x00
spi_flash_prot 0 0x1000 --> error
spi_flash_prot 0x10000 0x10000 --> error
BRANCH=None
Change-Id: Ie5908ce687b7ff207b09794c7b001a4fbd9e0f5a
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/259310
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds a new pair of interfaces called producer and consumer
which are simpler (in that they don't hold onto the underlying
queue) than the stream interfaces. This makes it easier to
share a single queue between the endpoints that will manipulate
it. It was not possible to share a queue between two objects
that implemented the in_stream and out_stream interfaces.
This also adds a pair of adaptors that can convert a producer
or consumer into a stream of the correct type. These adaptors
will be used for existing code once the usb-stream and usart
drivers are converted over to use the producer/consumer
interfaces instead of the stream interfaces.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I42b4b1ac15cca28e1adc6d3cea315f15e17a0b4d
Reviewed-on: https://chromium-review.googlesource.com/250941
Trybot-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Add new charge_ramp module which works with charge_manager to
slowly increase input current limit in order to find the optimal
charging current. To do this it looks for either VBUS drooping
too low or for the charger to over-current.
BUG=chrome-os-partner:34946
BRANCH=samus
TEST=tested with a variety of BC1.2 chargers, type-C only chargers,
and PD chargers to make sure we always stabilize charging at an
appropriate current limit.
Change-Id: Icc95aa2738ddb221f163f91c14a342a0674f9e0f
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/247304
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Add a FIFO to log important events on the PD MCU and coming from the PD
accessories.
The retrieval of the accessories log from the accessories by the PD MCU
is not implemented yet.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:32785
TEST=execute "ectool --name=cros_pd pdlog"
before and after plugging Zinger charger.
Change-Id: If96d73e711ff6ad64cfb99bd3e4d2d8f2643f19a
Reviewed-on: https://chromium-review.googlesource.com/238854
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Trybot-Ready: Vincent Palatin <vpalatin@chromium.org>
Assuming the dut has red/green battery led and a single power led
CONFIG_LED_POLICY_STD implements the chromeos spec:
* power led on in S0
* power led off in S5
* power led pulsing in S3
* battery led amber when charging
* battery led green when fully charged with AC
* battery led off when discharging
* battery led pulsing red when battery error
BUG=chrome-os-partner:35355
TEST=The Charging led behavior should match the cros spec
BRANCH=None
Change-Id: I645a939ecc2d44d73d2f52b295f9c7e8c923f77b
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/240705
Reviewed-by: Randall Spangler <rspangler@chromium.org>
define CONFIG_CMD_BATDEBUG to enable console commands.
If the battery is larger than 6Ah or smaller than 150mAh, scale the parameters
transparently to the user using macros.
BUG=chrome-os-partner:34477
BRANCH=none
TEST=Custom console commands for the fuel gauge
I also used a Logic16 from Saleae and the fuel gauge on hadoken.
Signed-off-by: Myles Watson <mylesgw@chromium.org>
Change-Id: I959d51c3188336e4ad0983528ad7e53a2955a764
Reviewed-on: https://chromium-review.googlesource.com/234285
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Myles Watson <mylesgw@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Myles Watson <mylesgw@chromium.org>
For accessories without software-sync mechanism, add the option to do a
RSA-based signature verification of the Read-Write firmware.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:31192
TEST=enable the configuration on Fruitpie and see the RW firmware
validated and jump to. Tried with good and bad RW images.
Change-Id: I3c886c2cbe17ca9543e19bf8599061c3f9751d4f
Reviewed-on: https://chromium-review.googlesource.com/229594
Reviewed-by: Todd Broch <tbroch@chromium.org>
Commit-Queue: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Remove host_event_commands.c from build to save flash space. The
PD MCU does not use host event infrastructure and instead has a
simple gpio line it uses to notify EC that it has info to share.
BUG=none
BRANCH=samus
TEST=make buildall. view the .map file and see we save about 700
bytes of flash.
Change-Id: I71b8a4e32b9ecb57eb1a57f6d28652476ee6afe6
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/231444
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This provides a framework for additional work. It
exposes an API (ccd_set_mode) that can be used by the
PD code to enable Case Closed Debug. Enabling CCD will
result in the USB 2.0 lines on Ryu (proto 2) to be
disconnected from the AP and for the USB peripheral to
be enabled and connected to the host. The result is
an enumerated device with no interfaces.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Enable CCD ryu_p2 and verify that it is enumerated
by the host correctly. This requires a reworked
Ryu (proto 2 with pullup).
Change-Id: I1fbecdd5f94a61519cfc18c5e087892c6bd77fde
Reviewed-on: https://chromium-review.googlesource.com/229139
Reviewed-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Split motion_sense.c.
Translate the accel data in the Android coordinate right away.
BUG=chrome-os-partner:32002
BRANCH=ToT
TEST=On samus, check lid angle are still correct.
Change-Id: If743e25245dc1ce4cdacb8a4d5af22616c4a79e4
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225486
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Move gesture to common directory, 1st step to be reused by
other board.
Cleanup motion_sense shutdown path.
BUG=chrome-os-partner:33102
TEST=Double tap still works on Samus
BRANCH=ToT
Change-Id: I0a3b38c4a7dbe95c27dcdebff04c1176aaf932d1
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/225235
Reviewed-by: Sheng-liang Song <ssl@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This implements a new API for EC modules to define MKBP event sources
and send MKBP event to the AP. Also, a new host command
EC_CMD_GET_NEXT_EVENT is added for the AP to query the pending MKBP
events. Each event type may have custom event data sent along with the
event.
BRANCH=None
BUG=chrome-os-partner:33194
TEST=Enable MKBP event on Ryu. Set a host event from EC console, run
'ectool nextevent', and see MKBP event 0x01 (HOST_EVENT) and the set
host event.
Signed-off-by: Vic Yang <victoryang@chromium.org>
Change-Id: I28a1b7e826bcc102bbe39016c9bb3e37d125664c
Reviewed-on: https://chromium-review.googlesource.com/224905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
charge_manager is intended to manage charge limits from various tasks
(typically PD charge tasks and USB / BC 1.2 charge tasks). These tasks
can update the charge limit of a port by calling charge_manager_update
(thread-safe function). If the charge limit has changed,
charge_manager_refresh will be queued as a deferred task, which will
select the "best" charge port and set the proper charge limit.
In order to use charge_manager, a board needs to do the following:
1. Declare PD_PORT_COUNT in usb_pd_config.h
2. Implement board_set_charge_limit
3. Implement board_set_active_charge_port
4. Call charge_manager_update whenever the available charge on a port changes.
BUG=chrome-os-partner:31361
TEST=Manual on samus_pd, with subsequent commit. Insert and remove
various chargers, check console to verify PD charger always has priority
and correct current limit is set based upon 'best' charger.
BRANCH=samus
Change-Id: Iede120b69e0b46ed329bcf9b7e07c39ba5e9f77b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222723
Reviewed-by: Alec Berg <alecaberg@chromium.org>
The Zinger RW is now signed with 2048-bit RSA key (using SHA-256 as
digest).
This CL implements the verification mechanism.
note: the RSA key used for signing must be provided as a .pem file.
The path to .pem file must be provided in the PEM environment variable.
By default, it's using the dev key stored in zinger_dev_key.pem.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28336
TEST=on Zinger, run with properly signed RW firmware and corrupted
firmware and check the serial traces.
Change-Id: Ia58482458904a3ed72d6b0e95996cae86a0ead83
Reviewed-on: https://chromium-review.googlesource.com/220178
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
2048-bit RSA public key cryptography signature verification code
which uses a pre-processed key for computation.
it is based on the code from vboot :
platform/vboot_reference/firmware/2lib/2rsa.c
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28336
TEST=using following CL, on Zinger, verify RW firmware signature.
Change-Id: I681a29144eb805cd5758aa6efe697ce2f656a298
Reviewed-on: https://chromium-review.googlesource.com/220186
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
This code is used to find the orientation of the sensor.
Given sensor are aligned with the edges of the device,
it is not too dificult to find manually.
BRANCH=ToT
BUG=None
TEST=Check ACCEL_CALIBRATE is not used anymore.
Check 'make buildall -j' works.
Change-Id: I81ffcb4f6b01c530ef16baf13113a5942f615092
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219527
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This module controls the inductive charging transmitter. For now, the
policy is to charge whenever possible.
BUG=chrome-os-partner:31392
TEST=Unit test passed
BRANCH=None
Change-Id: Ie48a38ad92fe2bc3329c4962e96572f2bc40b4e6
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/212715
ACPI and thermal throttling are used only by x86 platforms.
Modify the conditional build to avoid building them where they are not
used.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall
check the flash size on Ryu and see we are saving about 200 bytes with
this changes.
Change-Id: Ie5e1603fb3bea95eaa5cb1e6cb19f4ddb0e235e8
Reviewed-on: https://chromium-review.googlesource.com/210056
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
There is nothing chip-specific in the software CRC implementation. Let's
move it to common so that we can reuse it for other chips and unit
tests.
BUG=chrome-os-partner:31200
TEST=Define CONFIG_SW_CRC for host. Check crc.c compiles fine.
BRANCH=None
Change-Id: Icdc1d105c55c38ff07410cb5d733a31dbac53aea
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/211494
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Use a EC to PD host command to notify the PD MCU when a battery
is present and charged enough that it is ok to negotiate for a
higher power. The PD MCU will not negotiate until the host command
is received, which allows the system to be powered without a
battery or with a dead battery with 5V.
BUG=chrome-os-partner:28611
BRANCH=none
TEST=Tested on a samus:
1) Tested the normal case of battery charged and plugged in. When
charger is plugged in, the device immediately starts negotiating
for 20V and starts charging.
2) Tested with no battery. Plug in a charger, samus boots and stays
alive. VBUS measured at 5V. When a battery is plugged in, device
negotiates for 20V and starts charging.
3) Tested dead battery by taking a battery with no charge, and
plugging in zinger. Everything boots, but PD does not negotiate
for power. Then when battery reaches 1%, PD negotiates and zinger
switches to 20V without causing a reboot.
Change-Id: Iaa451403674e86cddbd3fe80e9503584910be576
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/201958
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Imported code from VBoot firmware cryptolib and slightly reformat it for
the EC code base.
We already have SHA-256, but for updates over PD, the maximum payload
size is 192 bits, so SHA-1 seems a better trade-off.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:28336
TEST=none
Change-Id: I6da7b71a9af03c6689accfa3c59cfcf7776fcfc6
Reviewed-on: https://chromium-review.googlesource.com/199553
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
This puts the code that talks to the lightbar hardware in one file, and the
code that implements the pretty patterns and behavior into another. This
will let us make improvements or changes to the patterns without requiring
detailed knowledge of the controller chips.
BUG=chrome-os-partner:28596
BRANCH=ToT
TEST=make buildall -j
Refactoring only. There is no new functionality.
Change-Id: I4e5fe8943385ddeab26bbd7e66c20e2dccd3dc43
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/199882
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Added ability to disable the keyboard to wake from suspend when the lid
is outside a certain angle range. This has been added to glimmer by
defining CONFIG_LID_ANGLE_KEY_SCAN in its board.h.
Also modified the lid angle calculation to include a reliability
flag which can be used to tell when the hinge aligns too closely
with gravity and the lid angle value is unreliable.
BUG=none
BRANCH=rambi
TEST=Tested on a glimmer:
In S3, verified that when the lid is open past ~180 deg, the keyboard
does not wake the machine. Also verified that if you align hinge with
gravity, the keyboard enabled/disabled status remains the same (since
we can't actually trust the lid angle value).
Change-Id: I45b2c7c3c4bbcae61d3a0f8b5baa461ab8dabfb0
Original-Change-Id: If1a1592d259902d38941936961854b81b3a75b95
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/190061
Reviewed-on: https://chromium-review.googlesource.com/191612
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In order to achieve really tiny firmwares, make our runtime (tasks,
hooks, muxed timers, GPIO abstraction ...) optional.
Add 2 new build options for it : CONFIG_COMMON_RUNTIME and
CONFIG_COMMON_GPIO which are enabled by default, and ensure all the
source files are built according to the right configuration variable.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=make buildall
build a minimal board with no runtime.
Change-Id: Icb621cbe0a75b3a320cb53c3267d6e578cd3c32f
Reviewed-on: https://chromium-review.googlesource.com/189403
Reviewed-by: Vic Yang <victoryang@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Remove copied code from V1 implementation, reduce to bare minimum needed to
satisfy external dependencies.
Don't actually enable it for any platforms, though.
BRANCH=ToT
BUG=chrome-os-partner:23776
TEST=make buildall -j
It's used by anything and doesn't do anything if it was, but test
compilation of the changed sources by defining CONFIG_CHARGER_V2.
Change-Id: Iea37d0b4fc48c8ebf7f7088cd1674d6e275d03d4
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/190853
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Making room for a new charge_state implementation.
BRANCH=ToT
BUG=chrome-os-partner:23776
TEST=make buildall -j
No new functionality, just renaming some files.
Change-Id: I80ce861f09129a518e180cac20d32e867a93cd46
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/190852
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This command wedges the I2C bus by writing part of a byte to or reading part
of the response from the slave device.
To enabled the wedge command you must define CONFIG_CMD_I2CWEDGE and you must
define I2C_PORT_HOST, the i2c port to use the wedge command.
BUG=chrome-os-partner:19286
TEST=Manual test on peach pit, spring, and glimmer. Define config in board.h
to enable the command:
On the EC console, execute the following "i2cwedge" command
i2cwedge 0x90 0 1 (wedge write)
or
i2cwedge 0x90 0 2 (wedge read)
and then "battery". Observe that the command reports an error.
Similarly, execute
i2cwedge 0x90 0 5 (wedge write + reboot)
or
i2cwedge 0x90 0 6 (wedge read + reboot)
on the EC console and observe a reboot. Then execute "battery" and observe
that the command works properly.
BRANCH=none
Change-Id: I10ccb21b047df907a4dfdbd84c0f582cfa2d939a
Signed-off-by: Hung-ying Tyan <tyanh@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/66389
Tested-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Alec Berg <alecaberg@chromium.org>
Move the CLZ instruction emulation C code to the common directory, so it
can be reused for all CPU cores missing a CLZ instruction (e.g. CortexM0).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=none
TEST=run EC console on STM32F072B Discovery board with Cortex-M0 core,
and pass all available unit-tests on target.
Change-Id: Ief56cac7430fcb0fbced8a8925250c89cbd0bcfc
Reviewed-on: https://chromium-review.googlesource.com/188981
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Added motion sense task to Clapper and Glimmer. This task samples
the accelerometers and calculate a lid angle. Note that as
the machine is rotated towards the hinge angle aligning
with gravity, the lid calculation becomes less trustworthy.
Added a math_util file to hold various mathematical functions
useful for calculating lid angle that may be helpful in other
places.
For each board with accelerometers we need to define some
orientation specific data in board.c. There is a calibration
procedure through the EC console that can be enabled by
defining CONFIG_ACCEL_CALIBRATE. The calibration procedure can
help determine the orientation data required.
For debugging purposes there is a console command to regularly
print to the EC console the accelerometer data and derived lid
angle. The console command can be enabled by defining
CONFIG_CMD_LID_ANGLE.
BUG=none
Original-BUG=chrome-os-partner:24703
BRANCH=rambi
TEST=Ran the calibration procedure on a Glimmer unit, and then
rotated the machine in space. Verified that the lid angle
calculated roughly matched actual lid angle.
Original-Change-Id: I63a5e384b7f6b628b4ea01de49843355fb8d6ebe
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/184783
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Alec Berg <alecaberg@chromium.org>
(cherry picked from commit efb07945a5159fa0e7a746c666b2519ebdca9c22)
Conflicts:
board/clapper/board.c
board/clapper/ec.tasklist
board/glimmer/board.c
board/glimmer/ec.tasklist
Change-Id: Ibc492ef5c11e7084e87f01338c4d7775f9a08c18
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/187433
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is experimental for now; the capsense chip simply reports its buttons
as the number keys on the keyboard (1-8).
BUG=chrome-os-partner:23382
BRANCH=samus,ToT
TEST=manual
To test, you'll need a reworked and correctly programmed capsense module.
Boot the system, and switch to VT2. Touch the capsense bar and you'll see
the input appear on the console as though you were typing numbers.
Note that the capsense hardware is still buggy. Refer to the bug for
workarounds.
Change-Id: I4c3a8b70b8197ffd538c38c59c9336383365afa7
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/185434
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Dave Parker <dparker@chromium.org>
