This sets LED to yellow for charging and battery-assist mode, green for
full and near-full, and red for error.
BUG=chrome-os-partner:22056
TEST=Unplug battery and see LED go red after 30 seconds
TEST=Charge battery and see yellow LED
TEST=See green LED when battery is charged
TEST=Unplug AC and see LED turned off
BRANCH=None
Change-Id: I7a512f3b0e6cbdf760c0cbd49cd63c26dc9f8539
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168182
This will help us debug battery charging.
BUG=chrome-os-partner:22055
TEST=On Kirby, type 'battery' and check the output.
BRANCH=None
Change-Id: Id510ca7816f359e64072837df6464a412eb7739f
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168181
At normal AP shutdown, Haswell systems skip S5 entirely and go directly to
G3. It's sometimes handy to pause in S5 as the other systems do, for things
like power-cycle tests that use the RTC to do a delayed wake from S5.
This CL adds a console command and a host command to enable/disable that
pause in S5.
The default is to skip S5, and the override value is not persistent across
EC reboots, so whenever the EC hibernates or reboots (Refresh + Power, software
sync), you'll have to re-enable it again.
BUG=chrome-os-partner:22346
BRANCH=falco,ToT
TEST=manual
On Haswell systems only.
To enable the pause in S5 at shutdown, do either of these:
EC console: gsv s5 1
root shell: ectool pause_in_s5 on
Shut the AP down politely, and it should pause in S5 for 10 seconds before
continuing to G3. You can see this by watching the EC console.
To disable the pause in S5 at shutdown, do any of these:
EC console: gsv s5 0
root shell: ectool pause_in_s5 off
or
press Refresh + POWER
Boot the system, then politely shut down. This time it should go directly to
G3 without pausing in S5.
Change-Id: I324e6e2373bc20b61a731b4ef443d7bb8edb6b83
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168086
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Now that we have battery and charger drivers, let's enable charging.
BUG=chrome-os-partner:22055
TEST=Test charging/discharging on Kirby
TEST=Unplug battery and see 'error' state
TEST=Plug battery and doesn't see error anymore
BRANCH=None
Change-Id: Idff513b38c9f5bb90700877750f3d2e2154d4b23
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168007
The charger stops charging when charging current is smaller than this
value. To maximize battery life, let's set this value to its minimum so
that the battery is charged to as full as possible.
BUG=chrome-os-partner:22238
TEST=Test charging on Kirby with the next CL
BRANCH=None
Change-Id: I528dd0668244cba480538b825fff1cf28d7748ec
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168006
This checks boot key combination like Power-F3-ESC and Power-F3-Down can
be properly detected.
BUG=chrome-os-partner:19236
TEST=Pass kb_scan test
BRANCH=None
Change-Id: I180918977299219a8421798dac2ab9fed84ef9a2
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167802
We already have a multi-step test. Let's move it to test_util.c so that
upcoming tests can also use it.
BUG=chrome-os-partner:19235
TEST=Pass all tests
BRANCH=None
Change-Id: I6b7a036297f3b4b2778687488d1dc5b5bb4fe255
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167950
Currently only x86 platform uses charge_state.c, and it's been tailored
to fit smart battery and bq247xx charger family.
For Kirby, we have different types of battery and charger, and thus need
to make some change to accommodate them. This includes:
- Abstract out smart battery specific bit mask
- Implement missing functions required by GAIA chipset module
- Add config flags for charging-enabled GPIO pin
- Allow battery that doesn't report desired voltage and current
BUG=chrome-os-partner:22055
TEST=Build all boards
TEST=Boot Link and check it charges/discharges battery
TEST=Test charging/discharging on Kirby along with the next two CLs
BRANCH=None
Change-Id: I910c030a45b4f775afffec0127cdc31e89b9dd55
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168005
This is only for initial bringup that requires OTG to boot kernel. Note
that we are expecting firmware for USB ID detection and hardware change
to charger chip, so this is likely going to be thrown away.
BUG=chrome-os-partner:21964
TEST=Plug in OTG dongle and check VBUS voltage is ~5V
TEST=Unplug and check it's ~0V.
BRANCH=None
Change-Id: Iee66bef117188fea14a76459945be3bf5afef0dd
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167832
BQ27541 is not a smart battery IC, and thus we cannot use existing smart
battery driver. Let's add a driver that implements a smart-battery-like
interface.
The 'battery' console command is also moved to battery.c so that it can
be reused by different battery driver.
BUG=chrome-os-partner:22048
TEST=Type 'battery' and check the reported values are sane.
TEST=Check 'battery' command works fine on Spring.
BRANCH=None
Change-Id: I5d1eaeb3f801478f3b9473fd43c1f2a2eda75859
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/66340
This adds EC_CMD_GET_SET_VALUE to the list of host commands. We have a bunch
of single-value getter/setter commands, which is wasteful. This is a start
towards unifying them into a simpler command.
BUG=chromium:285358
BRANCH=ToT,falco
TEST=none
There's nothing to test just yet. This just adds the command and some basic
interfaces. A future commit will make use of it.
Change-Id: Iee986b9d273b422bb06f3a0c9b7af50617f03d7f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168083
Reviewed-by: Randall Spangler <rspangler@chromium.org>
A delay between enabling PMIC_PWRON and 3.3V rail is needed so as to
prevent leakage.
BUG=chrome-os-partner:22101
TEST=Power cycle the AP.
BRANCH=None
Change-Id: I2dd1c7ebc71565fc64dacaeb5caa46b2d3801d50
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167582
Temperature sensor read is delegated to functions defined in board.c.
Let's mock that function instead of the one in temp_sensor module.
BUG=chrome-os-partner:19236
TEST=Pass thermal test.
BRANCH=None
Change-Id: Ic0387bd6a49e3f032e593c11c6f80bd36f8474e7
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167761
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
If we reboots the emulator without flushing test coverage information,
the test coverage report will be incorrect. Let's fix this by flushing
it before every reboot.
BUG=chrome-os-partner:19235
TEST=Generate test coverage report and check correctness.
BRANCH=None
Change-Id: I1eb060e419b767f382325bed841366c491ba56b7
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167770
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On Kirby, the EC has no direct control over several power rails. To shut
down the AP, we need to pull low XPSHOLD from the EC so that PMIC would
turn off AP power.
BUG=chrome-os-partner:22101
TEST=Repeatedly do 'power on' and 'power off'.
TEST=Reboot the EC and see AP booted.
BRANCH=None
Change-Id: I21d04e46a6cfb455ced073389a928f2549d5212d
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167201
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Most systems don't have a lightbar. Those that do need a way to detect that
one exists. That's easily done by just sending a EC_CMD_LIGHTBAR_CMD command
to the EC and checking the result. If the response is
EC_RES_INVALID_COMMAND, there isn't a lightbar.
But what .cmd value should we use in struct ec_params_lightbar? Future
lightbar implementations (if any), could remove existing functions or add
new ones, so there isn't a safe choice.
This change adds a LIGHTBAR_CMD_VERSION operation to determine if any new
implementation exists. Future systems should return some useful information
in response to this command. Existing systems will return
EC_RES_INVALID_PARAM, which is enough to distinguish them.
BUG=chromium:239205
BRANCH=none
TEST=manual
make BOARD=link
make BOARD=link runtests
There are no user-visible changes in functionality to anything.
Change-Id: Ibe37f74a4dcbf68dd6bfd1963530aec907e67534
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167549
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is just a simple driver that provides a function to set LED color
and also a console command for testing.
BUG=chrome-os-partner:22056
TEST=Change LED color and brightness with the console command.
BRANCH=None
Change-Id: I66ece63310a0547127698d1b242a5a1c130abff6
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167450
Instead of checking for BOARD_<board> to determine whether the board has
control over a power rail or not, use config option for this. Boards
without control over some power rails can then undefine the option in
board.h.
BUG=chrome-os-partner:21964
TEST=Build all boards.
BRANCH=None
Change-Id: I7ee4ebdb3ea595e182845e40db165623ee271997
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167200
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is the initial version of BQ24192 charger driver. For now, it only
probes for BQ24192 chip on initialization and get BQ24192 into host
mode.
Also, charger_closest_current() is identical across all charger drivers.
Let's move it to charger_common.c.
BUG=chrome-os-partner:22238
TEST=Build all boards. Boot Kirby and see BQ24192 initialized.
BRANCH=None
Change-Id: I5291362ff0e69b281bffd6d609ce6dc48eb10898
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167457
If the AP is suspended, it consumes little enough power that just
shutting its rails off doesn't cause it to reset to a known state.
This caused a problem where suspending the AP then rebooting the EC
would wedge the system; the EC would think the AP was on (since
XPSHOLD was asserted), but wouldn't be able to figure out how to turn
it back off. Silego reset wouldn't help, because that again just
reset the EC. Even setting PMIC_RESET to brown out the system
wouldn't drop power for long enough.
Simply pulsing AP_RESET_L low for 1 ms at EC boot (when not sysjump)
or AP force-shutdown forces the AP into a good state.
BUG=chrome-os-partner:22233
BRANCH=pit
TEST=from root shell, 'powerd_dbus_suspend'
from ec console 'reboot' - or just power+refresh
system should power on normally
Change-Id: I65f1239b5f6766f1c093c3064bce323df4acaf7d
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167355
Reviewed-by: Doug Anderson <dianders@chromium.org>
Commit-Queue: Doug Anderson <dianders@chromium.org>
Before this change drivers had no way of knowing that a frequency
change was coming. This could cause problems for some drivers (like
i2c) that need to make sure that a transaction isn't happening while a
frequency change is happening.
The PRE_FREQ_CHANGE archiecture is very simple here and we don't allow
any way to cancel it.
At the moment, we guarantee:
- We won't call PRE_FREQ_CHANGE with interrupts disabled, so acquiring
locks / sleeping is OK.
- We'll call the actual HOOK_FREQ_CHANGE after the PRE_FREQ_CHANGE.
PRE_FREQ_CHANGE and HOOK_FREQ_CHANGE should not use deferred function
calls.
BRANCH=pit
BUG=chrome-os-partner:22093
TEST=With all patches together:
- on AP: suspend_stress_test
- on EC: battery 10000 50
Change-Id: I2731a3e85d41e749fa571fdb74b5c9b12043cda6
Signed-off-by: Doug Anderson <dianders@chromium.org>
Previous-Reviewed-on: https://chromium-review.googlesource.com/167101
(cherry picked from commit d84c0dbbf7c5a72917a820e292ecfdfa698d0fb9)
Reviewed-on: https://chromium-review.googlesource.com/167148
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Putting the suspend/resume hook callbacks on a deferred task allows
frequency change notifications to lock mutexes. This is useful in a
future change which locks the i2c bus around frequency changes.
BRANCH=pit
BUG=chrome-os-partner:22093
TEST=With all patches together:
- on AP: suspend_stress_test
- on EC: battery 10000 50
Change-Id: If5e31040cdc7c95a4c8ba62ee72512cb79617cc9
Signed-off-by: Doug Anderson <dianders@chromium.org>
Previous-Reviewed-on: https://chromium-review.googlesource.com/167100
(cherry picked from commit ce31fda8695f4db1fa91f5bb224c781cf17f91c0)
Reviewed-on: https://chromium-review.googlesource.com/167147
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This fixes some jank in how the power LED works when going into
suspend. Previously the power LED could turn off for up to three
seconds before flashing amber when entering suspend.
BUG=chrome-os-partner:21622
BRANCH=peppy
TEST=Manual. Enter suspend and observe that LED goes from blue
to amber without turning off first.
Change-Id: Ib0bf9e998d250b0731405394d3ebb50d90de7cda
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167388
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If you're running the battery command in a loop:
* You may need a sleep so you don't trigger watchdog resets, at least
if you're running at a low clock frequency.
* You probably want to break on an error.
Make the sleep delay come from a parameter since you might want to
avoid it if you just want to pound on the bus as fast as possible.
BRANCH=pit
BUG=chrome-os-partner:22093
TEST=With all patches together:
- on AP: suspend_stress_test
- on EC: battery 10000 50
Change-Id: I6ae6d818c06f59064e90bd6d23d6d4c782544849
Signed-off-by: Doug Anderson <dianders@chromium.org>
Previous-Reviewed-on: https://chromium-review.googlesource.com/167103
(cherry picked from commit 703ce2abf2e38b0f1434224534c1be505e1244f7)
Reviewed-on: https://chromium-review.googlesource.com/167160
Reviewed-by: Hung-ying Tyan <tyanh@google.com>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The ID detection and charging circuits on Spring are very different from
that on Kirby. PWM current limit is no longer used. The ID detection
sequence is also different. Also, there is no boost circuit on Kirby.
Given those hardware issues that we had to work around on Spring, it's
unlikely that we will have another board that shares the same/similar
ID detection design with Spring. Let's rename extpower_usb to
extpower_spring to better reflect this.
BUG=None
TEST=Build and boot Spring.
BRANCH=None
Change-Id: I7c212a121eed55665593cb7e1b2b672891819940
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/67031
This unifies the PWM module interface for LM4 and STM32. Now PWM
channels are defined in board.h/board.c. Instead of calling functions
named pwm_set_fan_duty(x), one can now use pwm_set_duty(PWM_CH_FAN, x),
which prevents additional functions added when we have a new PWM
channel.
BUG=chrome-os-partner:18343
TEST=Limit input current on Spring.
TEST=Check power LED in S0/S3/S5 on Snow.
TEST=Check keyboard backlight functionality on Link.
TEST=Check fan speed control/detecting on Link.
BRANCH=None
Change-Id: Ibac4d79f72e65c94776d503558a7592f7db859dc
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/64450
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If the EC responds to the AP with IN_PROGRESS, the AP will then use
GET_COMMS_STATUS to poll for completion of the previous command.
If the EC doesn't support GET_COMMS_STATUS, it will return an error,
confusing the AP.
BUG=chrome-os-partner:20978
TEST=flashrom on Pit
BRANCH=pit
Original-Change-Id: I7c911ebc047042450b1eefc992ba2250d35fa078
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66702
Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 67efd2c100f9de6fe34d381f6145e2d795d8549f)
Change-Id: If102710d30cbc53670bb5652b473734c7d9251be
Reviewed-on: https://gerrit.chromium.org/gerrit/66827
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Commit-Queue: Andrew Bresticker <abrestic@chromium.org>
I missed this requirement the first time. Now it's here. Also adding a test
for it as well.
BUG=chrome-os-partner:20739
BRANCH=falco
TEST=manual
make BOARD=falco runtests
Change-Id: I88aac8d12d09f7970b04c4aa02b6986b5ea16306
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66684
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Problems with existing thermal control loop:
* Not multi-board friendly. thermal.c only supports Link and needs
refactoring. Temp thresholds and fan speeds are hard-coded.
* Only the PECI temp is used to determine the fan speed. Other temp sensors
are ignored.
* Has confusing data structures. Values in the CPU temp thresholds array mix
ACPI thresholds with fan step values.
With this change, the thermal task monitors all temp sensors in order to
perform two completely independent functions:
Function one: Determine if the host needs to be throttled by or informed of
any thermal events.
For thermal events, each temp sensor will have three threshold levels.
TEMP_HOST_WARN
* When any sensor goes above this level, host_throttle_cpu(1) will be called
to ask the CPU to slow itself down.
* When all sensors drop below this level, host_throttle_cpu(0) will be called.
* Exactly AT this level, nothing happens (this provides hysteresis).
TEMP_HOST_HIGH
* When any sensor goes above this level, chipset_throttle_cpu(1) will be
called to slow the CPU down whether it wants to or not.
* When all sensors drop below this level, chipset_throttle_cpu(0) will be
called.
* Exactly AT this level, nothing happens (this provides hysteresis).
TEMP_HOST_SHUTDOWN
* When any sensor is above this level, chipset_force_shutdown() will be
called to halt the CPU.
* Nothing turns the CPU back on again - the user just has to wait for things
to cool off. Pressing the power button too soon will just trigger shutdown
again as soon as the EC can read the host temp.
Function two: Determine the amount of fan cooling needed
For fan cooling, each temp sensor will have two levels.
TEMP_FAN_OFF
* At or below this temperature, no active cooling is needed.
TEMP_FAN_MAX
* At or above this temperature, active cooling should be running at maximum.
The highest level of all temp sensors will be used to request the amount of
active cooling needed. The function pwm_fan_percent_to_rpm() is invoked to
convert the amount of cooling to the target fan RPM.
The default pwm_fan_percent_to_rpm() function converts smoothly between the
configured CONFIG_PWM_FAN_RPM_MIN and CONFIG_PWM_FAN_RPM_MAX for percentages
between 1 and 100. 0% means "off".
The default function probably provide the smoothest and quietest behavior,
but individual boards can provide their own pwm_fan_percent_to_rpm() to
implement whatever curves, hysteresis, feedback, or other hackery they wish.
BUG=chrome-os-partner:20805
BRANCH=none
TEST=manual
Compile-time test with
make BOARD=falco runtests
On the EC console, the existing fan commands should work correctly:
faninfo - display the fan state
fanduty NUM - force the fan PWM to the specified percentage (0-100)
fanset RPM - force the fan to the specified RPM
fanset NUM% - force the fan to the specified percentage (0-100) between
its configured minimum and maximum speeds from board.h
(CONFIG_PWM_FAN_RPM_MIN and CONFIG_PWM_FAN_RPM_MAX)
fanauto - let the EC control the fan automatically
You can test the default pwm_fan_percent_to_rpm() with
fanset 1%
faninfo
The fan should be turning at CONFIG_PWM_FAN_RPM_MIN. Let the EC control it
automatically again with
fanauto
Also on the EC console, the thermal settings can be examined or changed:
> temps
PECI : 327 K = 54 C
ECInternal : 320 K = 47 C
G781Internal : 319 K = 46 C
G781External : 318 K = 45 C
>
> thermalget
sensor warn high shutdown fan_off fan_max name
0 373 387 383 333 363 PECI
1 0 0 0 0 0 ECInternal
2 0 0 0 0 0 G781Internal
3 0 0 0 0 0 G781External
>
> help thermalset
Usage: thermalset sensor warn [high [shutdown [fan_off [fan_max]]]]
set thermal parameters (-1 to skip)
>
> thermalset 2 -1 -1 999
sensor warn high shutdown fan_off fan_max name
0 373 387 383 333 363 PECI
1 0 0 0 0 0 ECInternal
2 0 0 999 0 0 G781Internal
3 0 0 0 0 0 G781External
>
From the host, ectool can be used to get and set these parameters with
nearly identical commands:
ectool thermalget
ectool thermalset 2 -1 -1 999
Change-Id: Idb27977278f766826045fb7d41929953ec6b1cca
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66688
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If there is an I2C transaction error while setting LED color, the three
LED color channels might be in an inconsistent state. In this case, we
should explicitly set the LED state to INVALID so as to force the next
LED color update.
BUG=None
TEST=Build success
BRANCH=Spring
Change-Id: I1353044ef782481872d692f15748413ef539cb27
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66314
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Due to the order of pre-processing, TASK_ID_CHARGER and
TASK_ID_SWITCH aren't defined even if they are in the ec.tasklist
for a board.
BUG=chrome-os-partner:21565
BRANCH=falco,peppy
TEST=Turn device off, remove AC power. Plug AC power back in.
Charging LED should light in ~1 second.
Change-Id: I20ebbec71ca5e5dc8ab34da946d3dfeb91fc7849
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66466
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Now that U-Boot and kernel can properly talk to the EC in pit, there's
no reason to hack all the FETs on. We only need to turn on FET4 which
enables SD card booting.
We'll leave the old "all fets on" hack there for "puppy", though.
Apparently that still needs it?
BRANCH=pit
BUG=chrome-os-partner:21975
TEST=Boot up and see LCD turn on.
TEST=Cold reset while holding recovery and can boot from SD card.
Change-Id: Iae96375ac7bd1a9eed8243367332cf003b62c48d
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/66127
Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org>
Firmware development for this board is happening on the
firmware-wolf-4389.24.B branch.
BUG=chrome-os-partner:21815
BRANCH=None
TEST=Run util/make_all.sh. Verify all is made.
Change-Id: I4b58a982a87562231453f3f201024b809c6a24fb
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65514
Reviewed-by: Randall Spangler <rspangler@chromium.org>
We often need to watch for transitions between one state and another, so
that we can issue warnings or take action ONCE. This abstracts that "have I
already reacted to this" stuff into a single set of functions.
For example, this code reads a GPIO every time through the loop, but it only
generates an event when the GPIO value changes from 0 to 1:
cond_t c;
cond_init_false(&c);
while(1) {
int val = read_some_gpio();
cond_set(&c, val);
if (cond_went_true(&c))
host_event(SOMETHING_HAPPENED);
sleep(1);
}
BUG=none
BRANCH=falco,peppy
TEST=manual
make BOARD=falco runtests
Change-Id: I42393fcf3c4eb71b9551118a0f442d55c0691315
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65071
We've been pausing in S5 for ten seconds for various arcane reasons related
to clock rates and USB peripherals. We don't need to do that anymore, and
there are other arcane reasons why it's better if we don't.
BUG=chrome-os-partner:21791
BRANCH=falco,peppy
TEST=manual
On the EC console, limit the output to just the chipset channel:
> chan 4
Now boot the AP, then shut down.
Before you'd see a ten-second pause in S5, like this:
[29.586858 x86 power state 3 = S0, in 0x00df]
[29.587268 x86 power state 7 = S0->S3, in 0x009f]
[29.587707 x86 power state 2 = S3, in 0x009f]
[29.587959 x86 power state 8 = S3->S5, in 0x009f]
[29.588474 x86 power state 1 = S5, in 0x009c]
[29.588733 x86 power state 1 = S5, in 0x009c]
[29.603317 x86 power state 1 = S5, in 0x0094]
[39.603612 x86 power state 9 = S5->G3, in 0x0094]
[39.604137 x86 power state 0 = G3, in 0x0000]
[39.604376 x86 power state 0 = G3, in 0x0000]
With this change the pause is gone:
[26.764160 x86 power state 3 = S0, in 0x00df]
[26.764570 x86 power state 7 = S0->S3, in 0x009f]
[26.765011 x86 power state 2 = S3, in 0x009f]
[26.765262 x86 power state 8 = S3->S5, in 0x009f]
[26.765777 x86 power state 9 = S5->G3, in 0x009c]
[26.766220 x86 power state 0 = G3, in 0x0008]
[26.766526 x86 power state 0 = G3, in 0x0008]
[26.770517 x86 power state 0 = G3, in 0x0000]
Change-Id: I05e19ddfe9dfa1bcc2a29103d120910c4371b88e
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65336
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Only link actually used this function, but all batteries were required
to provide an (empty) implementation. Use
CONFIG_BATTERY_VENDOR_PARAMS to gate this functionality, so non-link
battery code can be simpler.
BUG=chrome-os-partner:18343
BRANCH=none
TEST=build all platforms and pass unit tests
Change-Id: Ic2c6dd1163a981e48873d798f77891cc7de1f8cf
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65257
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Read status, set temperature alert thresholds, get and set
configuration options. I2c offsets and status/config register
bits are documented in temp_sensor_g781.h
Usage by example:
g781 - Print status info
g781 settemp 0x0e 12 - Set remote low temp alarm to 12C
g781 setbyte 0x09 0x40 - Enable single-shot mode
g781 getbyte 0xfe - Read device ID
BUG=None
BRANCH=falco,peppy
TEST=Manual. Run g781 console command
Signed-off-by: Dave Parker <dparker@chromium.org>
Change-Id: Id051f79ea643255d57c3fc694b7ae685a6611c81
Reviewed-on: https://gerrit.chromium.org/gerrit/65234
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Tested-by: Dave Parker <dparker@chromium.org>
If the power button is pressed for a shorter period than the debounce
timeout, then the debounced state never changes. This was causing the
power button state machine to disable scanning (in the interrupt
handler) but never re-enable it (in the deferred handler).
Easy fix; just re-enable based on whether the current state is
released, not whether the debounced state is transitioning to
released.
BUG=chrome-os-partner:21772
BRANCH=all (falco, pit, etc.)
TEST=type on console. briefly flick power button. type more; should work.
Change-Id: I9723a6aa10f122fcee62702b85ce7981b1c8103a
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65238
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Saving + restoring the channel print mask previously involved running
the 'chan' command with no parameters, then parsing the output. This
parsing is unreliable if other tasks are also writing to the console.
Add commands to save / backup the current channel mask, and later
restoring it. Typical method to limit channel mask will now be:
chan save
chan <mask>
...
chan restore
BUG=chromium:269758.
TEST=Run 'chan save' / 'chan 0' / 'chan restore' on EC console, verify
print mask is restored.
BRANCH=Peppy/Falco.
Change-Id: I725c7fb5e3ac7e55ed5f435446f8fc5c54af165f
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/65208
Reviewed-by: Randall Spangler <rspangler@chromium.org>
