scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 02:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
18ff8dca1b3e1122b6e527fa1dda3a76846bd3a2
OpenCellular/common
History
Alec Berg 37a23855f7 pd: add first version of TCPCI I2C interface 
Add first version of TCPCI (type-C port controller interface),
which is an I2C protocol for interfacing with TCPCs.

This is roughly tracking version 0.56 of the PD Interface spec.

BUG=none
BRANCH=none
TEST=tested on oak. modified oak EC to be TCPM and oak PD to
be TCPC and tested we can negotiate with hoho and zinger.

Change-Id: I83644ca83f2d3ce69d5d8356beca20a7ab155a87
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/270172
2015-05-22 18:12:02 +00:00
..
acpi.c
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
adc.c
Move ADC console command to common
2013-12-20 05:07:58 +00:00
als.c
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
ap_hang_detect.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
backlight_lid.c
Support backlight control via lid only
2013-09-27 23:07:21 +00:00
battery.c
Add 'at-shutdown' option to batterycutoff host command
2014-06-15 01:45:21 +00:00
build.mk
pd: add config options for including TCPM and TCPC separately
2015-05-22 05:35:06 +00:00
button.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
capsense.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
case_closed_debug.c
CCD: Add ability to enable and disable SPI bridge
2015-03-23 19:23:35 +00:00
charge_manager.c
charge_manager: modify PD power HC to give more info on current
2015-05-01 03:44:19 +00:00
charge_ramp.c
charge_ramp: fix flaky charge_ramp test
2015-05-02 01:14:13 +00:00
charge_state_v1.c
charger: Make critical battery shutdown timeout a config option
2015-01-15 05:13:14 +00:00
charge_state_v2.c
mighty: fix the LED bug of removed battery
2015-03-31 06:32:14 +00:00
charger.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
chipset.c
ryu: add a dummy power module for controlling sensors.
2014-11-18 05:19:47 +00:00
clz.c
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
console_output.c
console: remove CC_USBMS
2015-04-07 23:20:14 +00:00
console.c
Only process console input after console task started
2015-01-17 23:19:58 +00:00
consumer.c
Streams: Define a lower level abstraction for queue access
2015-02-24 00:27:50 +00:00
crc8.c
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
crc.c
Move software CRC implementation to common
2014-08-08 03:11:38 +00:00
eoption.c
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
extpower_falco.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
extpower_gpio.c
Initialize extpower module prior to modules with default priority
2014-03-29 02:14:26 +00:00
extpower_snow.c
Remove bolt, daisy, kirby, puppy, slippy boards
2013-11-21 22:21:56 +00:00
extpower_spring.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
fan.c
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
firmware_image.lds.S
cleanup: Rename image geometry CONFIGs
2015-05-12 20:54:37 +00:00
firmware_image.S
ryu_sh_loader: Add board directory for load image
2014-12-15 22:46:21 +00:00
flash.c
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
fmap.c
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
gesture.c
cleanup: rename motion sensor CONFIG_ options
2015-05-01 20:46:37 +00:00
gpio.c
cleanup: Don't admit the existence of unimplemented gpios
2015-02-20 02:59:52 +00:00
hooks.c
hooks: add hook for battery state of charge change
2015-02-03 05:39:18 +00:00
host_command_master.c
pd: Add timeout for HC flash commands.
2015-01-07 08:45:38 +00:00
host_command_pd.c
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
host_command.c
ec: Add Inventory command
2015-05-07 22:25:25 +00:00
host_event_commands.c
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
i2c_arbitration.c
cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER
2013-10-25 01:32:15 +00:00
i2c_wedge.c
i2c: add wedge command
2014-03-06 21:33:09 +00:00
i2c.c
i2c: Support I2C controllers with multiple ports
2015-04-17 19:38:02 +00:00
in_stream.c
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
inductive_charging.c
ryu: improve inductive charging control
2015-01-30 05:11:06 +00:00
keyboard_8042.c
nuc: Add all IC specific drivers of NPCX5M5G
2015-01-14 03:16:10 +00:00
keyboard_mkbp.c
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
keyboard_scan.c
samus: change charge override hot keys to ctrl+search+0|1|2
2015-01-24 06:42:02 +00:00
keyboard_test.c
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.c
ryu: fork P4/P5 support
2015-05-02 16:49:05 +00:00
led_common.c
rambi: fix led command
2014-01-14 09:19:45 +00:00
led_policy_std.c
Standard Power/Charging LED Behavior
2015-01-14 21:49:36 +00:00
lid_angle.c
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
lid_switch.c
lid_switch: Support forced lid open
2014-11-18 01:05:49 +00:00
lightbar.c
ec: Created lightbar params v2
2015-03-31 23:00:33 +00:00
main.c
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
math_util.c
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
memory_commands.c
cli: add ability to read/write memory of different bus width
2015-05-02 03:39:37 +00:00
mkbp_event.c
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
motion_lid.c
cleanup: rename motion sensor CONFIG_ options
2015-05-01 20:46:37 +00:00
motion_sense.c
driver: Add BMM150 behind BMI160 support.
2015-05-16 04:17:15 +00:00
onewire.c
Move onewire bus support from chip/lm4 to common
2013-08-02 18:22:57 -07:00
out_stream.c
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
panic_output.c
panic: Fix unaligned memory access panic
2015-04-14 01:15:43 +00:00
pd_log.c
pd_log: Add command to request PD MCU to write a log
2015-02-12 23:08:45 +00:00
pmu_tps65090_charger.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
pmu_tps65090_powerinfo.c
Add battery_get_params()
2013-12-02 22:03:51 +00:00
pmu_tps65090.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
port80.c
mec1322: Added task-based Port80 POST code support.
2015-04-27 23:29:30 +00:00
power_button_x86.c
power_button_x86: Don't inhibit power button in S0
2015-01-29 06:48:45 +00:00
power_button.c
Power Button: Wait for power button to be stable when waiting for release
2015-02-10 23:07:14 +00:00
printf.c
optimize printf size without the common runtime
2015-04-10 23:29:27 +00:00
producer.c
Streams: Define a lower level abstraction for queue access
2015-02-24 00:27:50 +00:00
pstore_commands.c
Change host command params/response pointers to void *
2012-07-26 16:25:34 -07:00
pwm_kblight.c
Pad jump tags to 4 bytes inside the system module
2013-11-05 02:32:40 +00:00
pwm.c
Move source files to driver/ and power/ subdirs
2013-10-23 20:07:25 +00:00
queue.c
Queue: Add methods that accept a memcpy routine
2015-01-08 00:38:13 +00:00
rsa.c
rsa: add support for 4096 and 8192 bit keys
2014-11-15 06:00:02 +00:00
rwsig.c
cleanup: Rename image geometry CONFIGs
2015-05-12 20:54:37 +00:00
sha1.c
Add SHA-1 hash
2014-05-17 20:14:17 +00:00
sha256.c
cleanup: Remove checkpatch warnings
2013-12-19 00:12:28 +00:00
shared_mem.c
samus_pd: make shmem command optional, disable on samus_pd
2015-02-24 00:27:42 +00:00
smbus.c
smbus: Don't use shared memory buffer for word writes
2015-02-04 23:32:42 +00:00
spi_flash_reg.c
spi_flash: Rework protection translation functions
2015-03-17 01:42:30 +00:00
spi_flash.c
spi_flash: Rework protection translation functions
2015-03-17 01:42:30 +00:00
stream_adaptor.c
Streams: Define a lower level abstraction for queue access
2015-02-24 00:27:50 +00:00
switch.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
system.c
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
temp_sensor.c
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
test_util.c
emulator: Keep fail count across sysjump
2014-01-08 03:49:36 +00:00
thermal.c
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
timer.c
samus_pd: disable timerinfo command to save space
2015-04-10 22:08:31 +00:00
uart_buffering.c
Allow console-reading host commands on locked systems
2015-04-21 21:18:33 +00:00
usb_pd_policy.c
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
usb_pd_protocol.c
pd: add first version of TCPCI I2C interface
2015-05-22 18:12:02 +00:00
usb_pd_tcpc.c
pd: add first version of TCPCI I2C interface
2015-05-22 18:12:02 +00:00
usb_pd_tcpm_stub.c
pd: add first version of TCPCI I2C interface
2015-05-22 18:12:02 +00:00
usb_pd_tcpm.c
pd: add first version of TCPCI I2C interface
2015-05-22 18:12:02 +00:00
usb_port_power_dumb.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
usb_port_power_smart.c
Support inverted ILIM_SEL for smart USB port power
2014-08-23 02:42:21 +00:00
util.c
Queue: Add methods that accept a memcpy routine
2015-01-08 00:38:13 +00:00
vboot_hash.c
cleanup: Rename image geometry CONFIGs
2015-05-12 20:54:37 +00:00
version.c
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
wireless.c
Allow AP to set wireless power state in suspend
2014-02-22 00:50:37 +00:00