scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 02:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
5cc37f51d6047320dcff379a61e31987237ddf4c
OpenCellular/common
History
Alec Berg d2c4781266 pd: enable charging through suzyQ debug accessory 
Enable charging through debug accessory by setting input
current limit to 3A when debug accessory is detected.
Add new dual-role toggling state for stay sink unless VBUS
is detected, which allows us to detect debug accessory
when we are not normally dual-role toggling.

BUG=none
BRANCH=smaug
TEST=plug suzyQ into ryu in S0 and in S5 and make sure that
we go to the SRC_ACCESSORY state and set charger input
current limit appropriately.

Change-Id: I6262c9d6cd0ae7159f343d36e19d290c2f2e0181
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/276368
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2015-06-10 03:33:33 +00:00
..
acpi.c
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
adc.c
Move ADC console command to common
2013-12-20 05:07:58 +00:00
als.c
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
ap_hang_detect.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
backlight_lid.c
Support backlight control via lid only
2013-09-27 23:07:21 +00:00
battery.c
Add 'at-shutdown' option to batterycutoff host command
2014-06-15 01:45:21 +00:00
blob.c
Cr50: Add usb_blob handler framework
2015-06-04 19:33:00 +00:00
build.mk
Cr50: Add usb_blob handler framework
2015-06-04 19:33:00 +00:00
button.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
capsense.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
case_closed_debug.c
CCD: Add ability to enable and disable SPI bridge
2015-03-23 19:23:35 +00:00
charge_manager.c
pd: move non-phy layer config out of usb_pd_config.h
2015-05-27 02:39:41 +00:00
charge_ramp.c
pd: move non-phy layer config out of usb_pd_config.h
2015-05-27 02:39:41 +00:00
charge_state_v1.c
charger: Make critical battery shutdown timeout a config option
2015-01-15 05:13:14 +00:00
charge_state_v2.c
glados: limit max input current to 1.5A to avoid i2c errors
2015-06-09 00:13:54 +00:00
charger.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
chipset.c
ryu: add a dummy power module for controlling sensors.
2014-11-18 05:19:47 +00:00
clz.c
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
console_output.c
console: remove CC_USBMS
2015-04-07 23:20:14 +00:00
console.c
Only process console input after console task started
2015-01-17 23:19:58 +00:00
crc8.c
EC: Add smbus interface read & write APIs
2014-08-29 02:57:00 +00:00
crc.c
Move software CRC implementation to common
2014-08-08 03:11:38 +00:00
eoption.c
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
extpower_falco.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
extpower_gpio.c
Initialize the memory-mapped AC_PRESENT flag
2015-05-28 03:18:06 +00:00
extpower_snow.c
Remove bolt, daisy, kirby, puppy, slippy boards
2013-11-21 22:21:56 +00:00
extpower_spring.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
fan.c
ACPI: Support accessing memmap data over ACPI CMD / DATA ports
2015-03-25 20:09:52 +00:00
firmware_image.lds.S
cleanup: Rename image geometry CONFIGs
2015-05-12 20:54:37 +00:00
firmware_image.S
ryu_sh_loader: Add board directory for load image
2014-12-15 22:46:21 +00:00
flash.c
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
fmap.c
cleanup: Use appropriate image geometry CONFIGs
2015-05-15 06:42:30 +00:00
gesture.c
cleanup: rename motion sensor CONFIG_ options
2015-05-01 20:46:37 +00:00
gpio.c
cleanup: Don't admit the existence of unimplemented gpios
2015-02-20 02:59:52 +00:00
hooks.c
hooks: add hook for battery state of charge change
2015-02-03 05:39:18 +00:00
host_command_master.c
pd: Add timeout for HC flash commands.
2015-01-07 08:45:38 +00:00
host_command_pd.c
pd: use pdcmd task to handle tcpc interrupt
2015-06-05 22:35:05 +00:00
host_command.c
ec: Add Inventory command
2015-05-07 22:25:25 +00:00
host_event_commands.c
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
i2c_arbitration.c
cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER
2013-10-25 01:32:15 +00:00
i2c_wedge.c
i2c: add wedge command
2014-03-06 21:33:09 +00:00
i2c.c
i2c/mec1322: Lock all I2C port before sysjump.
2015-06-05 03:22:06 +00:00
in_stream.c
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
inductive_charging.c
ryu: improve inductive charging control
2015-01-30 05:11:06 +00:00
keyboard_8042.c
Queue: Add policies to queues
2015-05-26 19:36:15 +00:00
keyboard_mkbp.c
keyboard_mkbp: fix interrupt handling with MKBP_EVENT
2015-05-30 01:04:52 +00:00
keyboard_scan.c
samus: change charge override hot keys to ctrl+search+0|1|2
2015-01-24 06:42:02 +00:00
keyboard_test.c
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.c
ryu: fork P4/P5 support
2015-05-02 16:49:05 +00:00
led_common.c
rambi: fix led command
2014-01-14 09:19:45 +00:00
led_policy_std.c
Standard Power/Charging LED Behavior
2015-01-14 21:49:36 +00:00
lid_angle.c
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
lid_switch.c
lid_switch: Support forced lid open
2014-11-18 01:05:49 +00:00
lightbar.c
ec: Created lightbar params v2
2015-03-31 23:00:33 +00:00
main.c
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
math_util.c
Convert motion sense calculations to fixed point.
2015-02-05 19:41:41 +00:00
memory_commands.c
cli: add ability to read/write memory of different bus width
2015-05-02 03:39:37 +00:00
mkbp_event.c
ryu: enable MBKP events for PD events
2015-05-28 23:02:18 +00:00
motion_lid.c
accel: move X,Y,Z definition
2015-06-09 12:10:42 +00:00
motion_sense.c
accel: move X,Y,Z definition
2015-06-09 12:10:42 +00:00
onewire.c
Move onewire bus support from chip/lm4 to common
2013-08-02 18:22:57 -07:00
out_stream.c
Stream: Add In and Out stream interfaces and config
2014-09-18 02:59:29 +00:00
panic_output.c
panic: Fix unaligned memory access panic
2015-04-14 01:15:43 +00:00
pd_log.c
pd: move non-phy layer config out of usb_pd_config.h
2015-05-27 02:39:41 +00:00
pmu_tps65090_charger.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
pmu_tps65090_powerinfo.c
Add battery_get_params()
2013-12-02 22:03:51 +00:00
pmu_tps65090.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
port80.c
mec1322: Added task-based Port80 POST code support.
2015-04-27 23:29:30 +00:00
power_button_x86.c
skylake: Use a simulated power button press to force-shutdown the AP
2015-06-04 01:15:55 +00:00
power_button.c
Power Button: Wait for power button to be stable when waiting for release
2015-02-10 23:07:14 +00:00
printf.c
optimize printf size without the common runtime
2015-04-10 23:29:27 +00:00
pstore_commands.c
Change host command params/response pointers to void *
2012-07-26 16:25:34 -07:00
pwm_kblight.c
Pad jump tags to 4 bytes inside the system module
2013-11-05 02:32:40 +00:00
pwm.c
Move source files to driver/ and power/ subdirs
2013-10-23 20:07:25 +00:00
queue_policies.c
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
queue.c
Queue: add peek_memcpy function
2015-06-09 12:10:37 +00:00
rsa.c
rsa: add support for 4096 and 8192 bit keys
2014-11-15 06:00:02 +00:00
rwsig.c
cleanup: Rename image geometry CONFIGs
2015-05-12 20:54:37 +00:00
sha1.c
Add SHA-1 hash
2014-05-17 20:14:17 +00:00
sha256.c
cleanup: Remove checkpatch warnings
2013-12-19 00:12:28 +00:00
shared_mem.c
samus_pd: make shmem command optional, disable on samus_pd
2015-02-24 00:27:42 +00:00
smbus.c
smbus: Don't use shared memory buffer for word writes
2015-02-04 23:32:42 +00:00
spi_flash_reg.c
spi_flash: Rework protection translation functions
2015-03-17 01:42:30 +00:00
spi_flash.c
spi_flash: Rework protection translation functions
2015-03-17 01:42:30 +00:00
stream_adaptor.c
Producer/Consumer: Refactor to use Queue policies
2015-05-26 19:36:21 +00:00
switch.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
system.c
i2c/mec1322: Lock all I2C port before sysjump.
2015-06-05 03:22:06 +00:00
temp_sensor.c
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
test_util.c
emulator: Keep fail count across sysjump
2014-01-08 03:49:36 +00:00
thermal.c
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
timer.c
samus_pd: disable timerinfo command to save space
2015-04-10 22:08:31 +00:00
uart_buffering.c
uart_buffering: extend CONSOLE_READ command for easy log concatenation
2015-06-02 01:02:58 +00:00
usb_pd_policy.c
pd: never answer malformed VDM
2015-05-27 21:30:25 +00:00
usb_pd_protocol.c
pd: enable charging through suzyQ debug accessory
2015-06-10 03:33:33 +00:00
usb_pd_tcpc.c
pd: implement TCPC RX Detect register to enable/disable TCPC RX
2015-06-03 03:50:06 +00:00
usb_pd_tcpm_stub.c
pd: implement TCPC RX Detect register to enable/disable TCPC RX
2015-06-03 03:50:06 +00:00
usb_pd_tcpm.c
pd: implement TCPC RX Detect register to enable/disable TCPC RX
2015-06-03 03:50:06 +00:00
usb_port_power_dumb.c
Add cprints() and ccprints()
2014-05-21 20:32:17 +00:00
usb_port_power_smart.c
Support inverted ILIM_SEL for smart USB port power
2014-08-23 02:42:21 +00:00
util.c
Queue: Add methods that accept a memcpy routine
2015-01-08 00:38:13 +00:00
vboot_hash.c
cleanup: Rename image geometry CONFIGs
2015-05-12 20:54:37 +00:00
version.c
Add option to enable GCC LTO
2015-05-19 02:46:27 +00:00
wireless.c
Allow AP to set wireless power state in suspend
2014-02-22 00:50:37 +00:00