Bruce 7b3032b1c7 Chell: modify led setting for OEM spec ...

Modify the led blink white at battery capacity less than 12%.

BUG=None
BRANCH=None
TEST=check the led blink white at battery capacity less than 12%

Change-Id: I3494ed7d207e769fe081b4442fd298b4e481e0a7
Signed-off-by: Bruce.Wan <Bruce.Wan@quantatw.com>
Reviewed-on: https://chromium-review.googlesource.com/319729
Commit-Ready: Bruce Wan <Bruce.Wan@quantatw.com>
Tested-by: Bruce Wan <Bruce.Wan@quantatw.com>
Reviewed-by: Shawn N <shawnn@chromium.org>

2016-01-05 23:39:06 -08:00

..

auron

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

bds

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

big

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

chell

Chell: modify led setting for OEM spec

2016-01-05 23:39:06 -08:00

cr50

Move rand_bytes implementation from tpm2 to chip/g.

2015-12-22 13:12:53 -08:00

dingdong

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

discovery

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

discovery-stm32f072

USART: Add DMA based receiver

2015-08-24 19:08:35 +00:00

glados

glados/chell: Do not pull-up RSMRST to PCH in hibernate

2015-12-09 05:14:14 +00:00

glados_pd

chell / chell_pd: Use power-optimized GPIO defaults

2015-12-24 01:43:00 -08:00

hadoken

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

hoho

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

honeybuns

honeybuns: enable updates over USB-PD

2015-12-11 00:47:56 -08:00

host

pd: change battery and variable sink cap for voltage inaccuracy

2015-10-23 13:18:58 -07:00

it8380dev

it8380dev: Implement GPIO mode for KBS pins and fix gpio_set_level()

2015-12-14 20:04:54 -08:00

jerry

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

kunimitsu

kunimitsu: add debug assert flag

2015-12-30 15:29:06 -08:00

lars

Lars: Update battery settings

2015-12-18 04:45:40 -08:00

lars_pd

Lars: Remove second port of PD firmware

2015-12-06 19:00:51 -08:00

llama

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

lucid

lucid: add LED support

2015-12-22 21:07:25 -08:00

npcx_evb

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

npcx_evb_arm

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

oak

oak: pd: increase stack size of PDCMD task

2015-12-01 22:36:58 -08:00

pdeval-stm32f072

pd: Add support for multiple distinct TCPC alert signals

2015-11-25 12:59:17 -08:00

pit

cleanup: Standardize use of CONFIG_I2C and add MASTER/SLAVE CONFIGs

2015-11-03 09:08:21 -08:00

plankton

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

rambi

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

ryu

motion: minium interval between motion task now a variable

2015-11-13 01:00:39 -08:00

samus

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

samus_pd

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

snoball

stm32: Don't use HSI48 clock for chips which don't support it

2015-12-11 17:03:22 -08:00

strago

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

twinkie

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

wheatley

wheatley: Add CONFIG_LTO definition to reduce FW size.

2015-12-30 20:40:48 -08:00

zinger

stm32: add synchronous debug printf

2015-10-19 13:45:49 -07:00

chell_pd

chell: Add EC/PD configuration for chell board

2015-10-12 13:15:48 -07:00

kunimitsu_pd

kunimitsu_pd: enable kunimitsu PD build

2015-08-12 04:25:20 +00:00

minimuffin

zinger: minimuffin: add board support for minimuffin

2014-10-02 20:51:10 +00:00

oak_pd

oak_pd: change oak_pd to be a sym link to glados_pd

2015-11-04 07:08:35 -08:00

OWNERS

Add OWNERS files

2014-04-02 19:58:53 +00:00