Nicolas Boichat fb58920c9e usb_hid_touchpad: Add timestamp field to touch events ...

We use the unofficial, Windows 8, Relative Scan time HID usage
(Digitizer page, 0x56) to add timestamps to our HID touchpad
events.

The timestamps is a rolling, unsigned, 16-bit integer, with a
resolution of 100us (so it wraps around every 6.5s).

The host will be able to synchronize to that timestamp, resetting
an offset every time the touchpad is quiet a certain amount of
time (e.g. 1 second).

BRANCH=none
BUG=b:63685117
TEST=Flash hammer, timestamps are reported in HID descriptor.

Change-Id: Ie5d56a9df14e464d2cdcd559f550d6e3cc81961f
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/603041
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>

2017-08-16 06:03:49 -07:00

..

2id.h

rwsig: Add support for rwsig image types

2017-02-17 04:09:37 -08:00

accelgyro.h

motion_sense: Add "spoof" mode

2017-01-07 13:29:52 -08:00

acpi.h

Move ACPI stuff out of chip/lm4 and into common

2013-12-12 18:21:56 +00:00

adc.h

servo_v4: Fix ADC console command

2016-05-26 16:17:26 -07:00

als.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

ap_hang_detect.h

Add AP hang detection

2013-12-17 21:27:53 +00:00

backlight.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

base32.h

common: Add base32 encoding

2017-06-28 23:23:41 -07:00

battery_bq27621_g1.h

battery: Add support for TI's BQ27621_g1 fuel gauge.

2014-12-31 00:01:00 +00:00

battery_smart.h

Basking: Fix cannot power on when resume from battery cutoff.

2017-01-13 05:00:27 -08:00

battery.h

battery: Allow BATTERY_LEVEL_NEAR_FULL to be defined by board

2017-03-09 01:09:35 -08:00

bluetooth_le_ll.h

btle: Accepts and maintains connections

2016-08-23 15:36:55 -07:00

bluetooth_le.h

btle: Timeout of ble_rx now based on chip time

2016-08-12 20:49:45 -07:00

board_config.h

power: Add board callback before RSMRST# state change

2016-10-26 01:44:06 -07:00

btle_hci2.h

include: Add HCI include files from NewBlue

2016-07-22 20:37:17 -07:00

btle_hci_int.h

include/btle_hcl_int.h: Fix misspellings in #defines and struct name

2016-11-15 17:41:58 -08:00

button.h

Fizz: Add recovery button

2017-05-12 18:46:14 -07:00

byteorder.h

Move include/byteorder.h -> builtin/endian.h

2016-04-22 20:40:03 -07:00

capsense.h

Samus: Support capsense input as keyboard events.

2014-02-08 04:15:39 +00:00

case_closed_debug.h

cr50: CCD V1 controls UART access

2017-08-01 13:01:41 -07:00

charge_manager.h

charge_manager: Consider port in source PDO.

2017-08-11 20:10:20 -07:00

charge_ramp.h

charge_ramp: Specify port number in board_is_vbus_too_low()

2017-02-02 19:09:52 -08:00

charge_state_v1.h

Move common charge_state time constants to a common header

2014-04-11 15:37:38 +00:00

charge_state_v2.h

charger_profile: Add common code for charger profile override

2017-01-02 14:04:12 -08:00

charge_state.h

charger: Add state for discharge + full

2017-03-03 17:11:30 -08:00

charger_detect.h

lucid: add support to detect BC1.2 suppliers

2016-02-26 21:22:07 -08:00

charger_profile_override.h

charger_profile: support multiple battery voltage range thresholds

2017-02-10 19:02:55 -08:00

charger.h

charge_ramp: Specify port number in board_is_vbus_too_low()

2017-02-02 19:09:52 -08:00

chipset.h

chip/npcx/espi: Handle global reset events asserting eSPI_Reset#

2017-02-09 20:48:47 -08:00

clock.h

stm32: Add delay after enabling peripheral clock

2015-02-10 10:47:07 +00:00

common.h

Fix compilation with coreboot-sdk

2017-08-04 18:08:16 -07:00

compile_time_macros.h

usb_update: Add handler for pairing challenge command

2017-06-15 07:07:40 -07:00

config_std_internal_flash.h

cleanup: Remove CONFIG_FW_IMAGE_SIZE

2015-09-24 18:07:01 -07:00

config.h

coral: Add host command to fetch SKU ID

2017-08-15 06:51:58 -07:00

console_channel.inc

cr50: Add physical presence state machine

2017-07-19 14:41:21 -07:00

console.h

g: fix build without CONFIG_RESTRICTED_CONSOLE_COMMANDS

2017-05-10 07:08:31 -07:00

consumer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

crc8.h

crc8: Support crc calculation across non-contiguous data

2016-03-18 22:16:53 -07:00

crc.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

crypto_api.h

g: common: introduce generic crypto API

2017-01-25 22:12:28 -08:00

curve25519.h

core/cortex-m0/curve25519: Integrate fast curve25519 implementation

2017-07-03 21:44:34 -07:00

device_event.h

Add support for reporting device events

2017-06-30 03:08:42 -07:00

device_state.h

cr50: Clean up device state code

2017-08-08 17:34:09 -07:00

dma.h

common: Change interface to dma_test

2015-07-27 22:19:16 +00:00

dptf.h

Support DPTF charger current limiting

2014-02-08 00:14:48 +00:00

ec_commands.h

coral: Add host command to fetch SKU ID

2017-08-15 06:51:58 -07:00

eeprom.h

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

espi.h

npcx: Add espi driver of npcx5mng for x86-based platform.

2016-08-10 22:16:57 -07:00

event_log.h

pd_log: Make PD logging more generic for general purpose logging

2017-08-02 15:02:34 -07:00

extension.h

cr50: usb_updater: include return codes into USB response payload

2017-06-06 14:36:28 -07:00

extpower.h

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

fan.h

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

flash.h

Add OTP support

2017-07-28 17:45:13 -07:00

gesture.h

common: motion: move gesture actions in motion task.

2015-09-18 17:55:32 -07:00

gpio_list.h

Add check to prevent duplicate PIN assignments

2016-09-09 17:15:25 -07:00

gpio_signal.h

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

gpio.h

g: don't enable interrupts in gpio_set_flags_by_mask

2017-06-13 15:12:33 -07:00

gpio.wrap

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

hooks.h

cr50: Add case closed debugging V1 configuration

2017-07-20 15:00:40 -07:00

host_command.h

Enable two-byte responses from host command handlers.

2017-05-25 04:27:41 -07:00

hwtimer.h

pit: Clean up timer init code

2013-06-26 09:08:23 -07:00

i2c.h

i2c: Lock out i2c passthru except for desired ports

2016-12-01 19:59:01 -08:00

i8042_protocol.h

More supports for A20 enable/disable

2012-11-04 20:27:57 -08:00

inductive_charging.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

jtag.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

keyboard_8042_sharedlib.h

keyboard_8042: Allow scancode sets to be mutable

2017-05-18 18:07:29 -07:00

keyboard_8042.h

keyboard: Always call keyboard_state_changed

2016-11-17 07:08:25 -08:00

keyboard_config.h

common: Add new recovery mode button combination

2016-11-08 20:30:07 -08:00

keyboard_mkbp.h

mkbp: Add support for buttons and switches.

2016-07-19 18:33:36 -07:00

keyboard_protocol.h

keyboard: Always call keyboard_state_changed

2016-11-17 07:08:25 -08:00

keyboard_raw.h

ectool: Support keyboard factory scanning

2016-04-01 00:21:35 -07:00

keyboard_scan.h

keyboard_scan: Add option to not handle boot key combinations

2017-05-08 07:04:06 -07:00

keyboard_test.h

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.h

common: lightbar: put multiple commands under i2c_lock

2015-09-19 12:27:21 -07:00

led_common.h

common/led_common: Add API for controlling LED state

2017-05-02 17:45:16 -07:00

libsharedobjs.h

libsharedobjs: Add libsharedobjs.h.

2015-07-17 03:17:57 +00:00

lid_angle.h

Cyan: Added Clamshell/Tablet mode support

2015-08-10 20:42:18 +00:00

lid_switch.h

Split lid switch code out of switch.c to its own file

2013-04-02 14:12:57 -07:00

lightbar_msg_list.h

Remove PULSE and TEST sequences from lightbar module

2014-10-08 02:50:54 +00:00

lightbar_opcode_list.h

lightbar: interpreter additions to encode other patterns

2014-10-15 18:22:37 +00:00

lightbar.h

common: lightbar: Add histeresis to prevent flickering

2015-10-23 18:03:12 -07:00

link_defs.h

cr50: Add case closed debugging V1 configuration

2017-07-20 15:00:40 -07:00

lpc.h

intel_x86: Make common code for LPC S0 <-> S0ix transitions

2017-01-21 10:03:45 -08:00

mag_cal.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat33.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

memory_commands.h

Initial sources import 2/3

2011-12-07 19:10:02 +00:00

mkbp_event.h

mkbp_event: Properly queue events during host sleep

2016-11-04 18:31:37 -07:00

module_id.h

stm32f446e-eval: add support for stm32f446

2016-08-17 16:19:07 -07:00

motion_lid.h

common: Add tablet_mode API

2016-11-08 17:11:28 -08:00

motion_sense.h

sensors: add bmi160 & kionix orientation driver

2017-08-08 17:34:11 -07:00

nvcounter.h

Add non-volatile flash counter

2017-06-02 10:38:57 -07:00

nvmem_vars.h

Add nvmem-backed key=value variable storage

2016-12-21 19:42:37 -08:00

nvmem.h

cr50: Make sure TPM wipe only clears TPM data.

2017-02-23 01:19:07 -08:00

onewire.h

Clean up LED and onewire modules

2012-10-25 14:12:11 -07:00

otp.h

Add OTP support

2017-07-28 17:45:13 -07:00

panic.h

panic: Provide declarations for chip panic data backup/restore

2017-06-15 15:17:17 -07:00

peci.h

Switch temp sensor polling to use hooks instead of task

2012-11-01 12:45:22 -07:00

physical_presence.h

cr50: Add physical presence state machine

2017-07-19 14:41:21 -07:00

port80.h

mec1322: Change the Port 80 task to a timer IRQ.

2015-10-19 18:21:22 -07:00

power_button.h

KBL/SKL: Add wait between DSW_PWROK and PWRBTN

2017-06-19 21:03:29 -07:00

power_led.h

Replace generated CONFIG_TASK_ macros with HAS_TASK_

2013-04-24 16:32:58 -07:00

power.h

Apollolake: Enter/exit from S0ix based on host commands from kernel

2016-11-17 16:09:44 -08:00

printf.h

printf: Add sign ('+') flag

2016-07-29 10:51:22 -07:00

producer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pwm.h

npcx: Move pwm open-drain functionality from gpio to pwm driver.

2017-03-24 06:49:55 -07:00

queue_policies.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

queue.h

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rma_auth.h

common: Add RMA reset auth challenge-response crypto

2017-06-30 16:02:50 -07:00

rollback.h

rollback: Add function to fetch secret

2017-06-14 01:19:31 -07:00

rsa.h

common: Split rwsig parts from rsa.h header

2017-04-11 20:22:32 -07:00

rwsig.h

vboot: Verify and jump to RW_A or RW_B

2017-07-13 19:45:57 -07:00

sfdp.h

common: Fixes the SFDP_BITFIELD() macro.

2016-01-29 02:59:58 +00:00

sha1.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

sha256.h

sha256: add support for hmac_sha256, and add test for sha256

2017-06-14 05:59:37 -07:00

shared_mem.h

common: introduce malloc/free implementation

2017-01-05 21:13:09 -08:00

smbus.h

Fix various misspellings in comments

2016-11-15 17:41:53 -08:00

software_panic.h

stm32: add TRNG support

2017-02-23 11:36:21 -08:00

spi_flash_reg.h

Celes: Add define to support GD25Q41B for External EC ROM.

2015-09-15 19:17:53 -07:00

spi_flash.h

flash: Add command to get SPI flash chip info

2016-09-23 12:21:51 -07:00

spi_nor.h

common/spi_nor: Adds RDID and 64KiB erase support

2016-12-07 23:45:29 +00:00

spi.h

spi: extend spi master API on STM32

2017-03-13 17:53:58 -07:00

stack_trace.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

switch.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

system.h

coral: Add host command to fetch SKU ID

2017-08-15 06:51:58 -07:00

tablet_mode.h

common: Add tablet_mode API

2016-11-08 17:11:28 -08:00

task_filter.h

ec: Add a task information library for the stack analyzer.

2017-08-15 00:25:20 -07:00

task_id.h

Makefile: Allow different task list for RO and RW

2017-04-25 05:52:34 -07:00

task.h

npcx: i2c: Add support for npcx7 series ec

2017-05-04 21:38:51 -07:00

temp_sensor_chip.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

temp_sensor.h

Include battery fuel gauge temp sensor in temperature sensors

2014-02-08 04:21:26 +00:00

test_util.h

host: mock i2c_xfer

2015-09-16 14:49:46 -07:00

thermal.h

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

throttle_ap.h

Add more build conditions on x86-only code.

2014-08-10 18:39:24 +00:00

timer.h

timer: fix clock() implementation to match TPM2 library expectations

2016-07-21 17:32:28 -07:00

tpm_log.h

tpm: Add optional event logging

2017-08-10 22:47:24 -07:00

tpm_manufacture.h

cr50: provide chip factory mode support

2017-07-30 22:41:06 -07:00

tpm_registers.h

cr50: read fwmp and act on it when controlling console restrictions

2017-05-31 00:24:01 -07:00

tpm_vendor_cmds.h

tpm: Add optional event logging

2017-08-10 22:47:24 -07:00

trng.h

stm32: add TRNG support

2017-02-23 11:36:21 -08:00

u2f_impl.h

Add U2F implementation

2017-06-29 10:37:40 -07:00

u2f.h

Add U2F implementation

2017-06-29 10:37:40 -07:00

uart.h

UART: Remove enable/disable interrupt functions

2016-04-27 10:10:02 -07:00

update_fw.h

update_fw: Add support for touchpad update over virtual address

2017-08-10 01:14:59 -07:00

usb_api.h

usb_api.h: Stub usb_wake if CONFIG_USB_REMOTE_WAKEUP is not defined

2017-08-12 05:22:03 -07:00

usb_bb.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_charge.h

USB: Remove usb_charge_ports_enabled

2017-04-20 13:09:07 -07:00

usb_console.h

update case closed debugging partial mode policy

2015-09-08 13:49:09 -07:00

usb_descriptor.h

Add OTP support

2017-07-28 17:45:13 -07:00

usb_hid_touchpad.h

usb_hid_touchpad: Add timestamp field to touch events

2017-08-16 06:03:49 -07:00

usb_hid.h

chip/stm32/usb_hid: Separate HID keyboard support

2016-11-16 19:04:47 -08:00

usb_i2c.h

usb_i2c: Fail if board I2C bridge is disabled

2017-07-31 21:39:39 -07:00

usb_mux.h

usb_mux: Merge PS8743 & PS8740 as PS874X

2017-08-11 20:10:23 -07:00

usb_pd_tcpc.h

tcpm: Add configuration struct for tcpc i2c params

2015-11-08 17:31:12 -08:00

usb_pd_tcpm.h

PD_CONTROL: add subcommand to power up a TCPC.

2017-08-03 19:23:13 -07:00

usb_pd.h

charge_manager: Consider port in source PDO.

2017-08-11 20:10:20 -07:00

util.h

common: sensors: add extra sensor attributes

2017-05-18 21:05:23 -07:00

vb21_struct.h

rwsig: Add support for rwsig image types

2017-02-17 04:09:37 -08:00

vboot_hash.h

vboot_hash: Abort hash calculation on flash write

2015-07-01 03:49:00 +00:00

vboot.h

vboot: Jump to RW early

2017-07-14 04:01:45 -07:00

vec3.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

vec4.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.h

common/rollback: Add support for rollback protection

2017-04-06 03:29:38 -07:00

virtual_battery.h

i2c_passthru: fix virtual battery operation

2016-12-14 06:03:14 -08:00

watchdog.h

Include "config.h" in include/watchdog.h.

2017-03-10 19:52:31 -08:00

wireless.h

Initial Glower commit

2015-01-20 20:56:43 +00:00