ucentral-schema: update to latest HEAD

125a148 add PoE support for client ports
17b6c18 Cloud Package Manager
a86b8b0 Fix typo in enhanced MPSK property name
57852ed update schema.json to 4.1.0
e155483 command: update upgrade and factory commands to handle new operational certs

Signed-off-by: John Crispin <john@phrozen.org>

.github/workflows/build-dev.yml

@@ -15,21 +15,20 @@ on:
 
 jobs:
   build:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     outputs:
       x64_vm_image_name: ${{ steps.package_and_upload_image.outputs.x64_vm_image_name }}
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cybertan_eww631-a1', 'cybertan_eww631-b1','sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'sercomm_ap72tip', 'udaya_a6-id2', 'udaya_a6-od2', 'wallys_dr5018', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
-
+        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
     steps:
     - uses: actions/checkout@v3
 
     # Clean unnecessary files to save disk space
     - name: clean unncessary files to save space
       run: |
-        docker rmi `docker images -q`
+        docker rmi `docker images -q` || true
 
     - name: Build image for ${{ matrix.target }}
       id: build
@@ -81,7 +80,7 @@ jobs:
         fi
 
   trigger-testing:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build
     if: startsWith(github.ref, 'refs/tags/v')
     steps:
@@ -94,7 +93,7 @@ jobs:
         client-payload: '{"ref": "${GITHUB_REF#refs/tags/}", "sha": "${{ github.sha }}"}'
 
   create-x64_vm-ami:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build
     if: startsWith(github.ref, 'refs/tags/v')
     steps:

feeds/bluetooth/nrf52840/files/etc/init.d/nrf52840

@@ -6,7 +6,8 @@ boot() {
 	. /lib/functions/system.sh
 	case $(board_name) in
 	edgecore,eap102|\
-	edgecore,oap102)
+	edgecore,oap102|\
+	edgecore,oap103)
 		echo 54 > /sys/class/gpio/export
 		echo out > /sys/class/gpio/gpio54/direction
 		echo 0 > /sys/class/gpio/gpio54/value

feeds/hostapd/hostapd/files/hostapd.sh

@@ -117,8 +117,6 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -162,7 +160,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		rts_threshold beacon_rate maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -261,8 +259,6 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
-	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -471,6 +467,9 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
+
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -724,7 +723,8 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp
+		vendor_elements fils uci_section dynamic_probe_resp \
+		rssi_reject_assoc_rssi rssi_ignore_probe_request 
 
 	set_default fils 0
 	set_default isolate 0
@@ -778,6 +778,8 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/hostapd/hostapd/patches/zzz-ignore-probe-event.patch

@@ -0,0 +1,14 @@
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
+ 	int ubus_response;
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+-	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
++	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
++		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
+ 		return;
++	}
+ 
+ 	if (len < IEEE80211_HDRLEN)
+ 		return;

feeds/hostapd/hostapd/patches/zzzz-001-fix-assoc-reject-during-roaming.patch

@@ -0,0 +1,46 @@
+Index: hostapd-2023-09-08-e5ccbfc6/src/ap/wpa_auth_ft.c
+===================================================================
+--- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/wpa_auth_ft.c
++++ hostapd-2023-09-08-e5ccbfc6/src/ap/wpa_auth_ft.c
+@@ -3293,6 +3297,8 @@ static int wpa_ft_process_auth_req(struc
+ 	size_t identity_len = 0, radius_cui_len = 0;
+ 	size_t pmk_r1_len, kdk_len, len;
+ 	int retval = WLAN_STATUS_UNSPECIFIED_FAILURE;
++	struct os_reltime now;
++	struct rsn_ftie *ftie;
+ 
+ 	*resp_ies = NULL;
+ 	*resp_ies_len = 0;
+@@ -3324,6 +3330,9 @@ static int wpa_ft_process_auth_req(struc
+ 		goto out;
+ 	}
+ 
++	ftie = (struct rsn_ftie *) parse.ftie;
++	os_memcpy(sm->SNonce, ftie->snonce, WPA_NONCE_LEN);
++
+ 	if (parse.r0kh_id == NULL) {
+ 		wpa_printf(MSG_DEBUG, "FT: Invalid FTIE - no R0KH-ID");
+ 		retval = WLAN_STATUS_INVALID_FTIE;
+@@ -3424,10 +3433,18 @@ pmk_r1_derived:
+ 	os_memcpy(sm->pmk_r1, pmk_r1, pmk_r1_len);
+ 	sm->pmk_r1_len = pmk_r1_len;
+ 
+-	if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) {
+-		wpa_printf(MSG_DEBUG, "FT: Failed to get random data for "
+-			   "ANonce");
+-		goto out;
++	if (os_get_reltime(&now) < 0 ||
++	    os_reltime_expired(&now, &sm->ANonce_time, 1)) {
++		if (random_get_bytes(sm->ANonce, WPA_NONCE_LEN)) {
++			wpa_printf(MSG_DEBUG, "FT: Failed to get random data for "
++				   "ANonce");
++			return WLAN_STATUS_UNSPECIFIED_FAILURE;
++		}
++		sm->ANonce_time.sec = now.sec;
++		sm->ANonce_time.usec = now.usec;
++		wpa_printf(MSG_INFO, "FT: ANonce was randomized");
++	} else {
++		wpa_printf(MSG_INFO, "FT: ANonce has not expired");
+ 	}
+ 
+ 	/* Now that we know the correct PMK-R1 length and as such, the length

feeds/hostapd/hostapd/src/src/ap/ubus.c

@@ -1944,6 +1944,21 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
+{
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	if (!addr)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", addr);
+	blobmsg_add_u32(&b, "rssi", rssi);
+
+	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
+}
+
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/hostapd/hostapd/src/src/ap/ubus.h

@@ -56,6 +56,7 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -32,8 +32,6 @@ ALLWIFIBOARDS:= \
 	cybertan-eww622-a1 \
 	cybertan-eww631-a1 \
 	cybertan-eww631-b1 \
-	sonicfi-rap630c-311g \
-	sonicfi-rap630w-311g \
 	edgecore-eap101 \
 	gl-ax1800 \
 	gl-axt1800 \
@@ -41,7 +39,10 @@ ALLWIFIBOARDS:= \
 	sercomm-wallaby \
 	edgecore-eap102 \
 	edgecore-oap102 \
+	edgecore-oap103 \
 	edgecore-eap104 \
+	emplus-wap385c \
+	emplus-wap386v2 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -51,6 +52,10 @@ ALLWIFIBOARDS:= \
 	wallys-dr5018 \
 	wallys-dr6018 \
 	wallys-dr6018-v4 \
+	sonicfi-rap630c-311g \
+	sonicfi-rap630w-311g \
+	sonicfi-rap630w-312g \
+	sonicfi-rap650c \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -393,19 +398,24 @@ $(eval $(call generate-ath11k-wifi-package,cig-wf194c4,Cigtech WF194c4))
 $(eval $(call generate-ath11k-wifi-package,cybertan-eww622-a1,CyberTan EWW622 A1))
 $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-a1,CyberTan EWW631 A1))
 $(eval $(call generate-ath11k-wifi-package,cybertan-eww631-b1,CyberTan EWW631 B1))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
-$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sercomm-wallaby,Sercomm Kiwi))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr6018,Wallys DR6018))
 $(eval $(call generate-ath11k-wifi-package,wallys-dr6018-v4,Wallys DR6018 V4))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap101,EdgeCore EAP101))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
+$(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/cooling/files/cooling.init

@@ -18,9 +18,11 @@ start() {
 	[ "$enabled" -gt 0 ] || return 1
 
 	case "$board" in
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g)
-        service_start /usr/sbin/cooling
+		sonicfi,rap630c-311g)
+		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630c-311g-cooling.conf
+		;;
+		sonicfi,rap630w-311g)
+		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630w-311g-cooling.conf
 		;;
 	esac
 

feeds/ipq807x_v5.4/cooling/src/cooling.c

@@ -28,143 +28,270 @@
 
 #define CUR_STATE_PATH "/sys/devices/virtual/thermal/cooling_device%i/cur_state"
 #define TEMPER_PATH "/sys/devices/virtual/thermal/thermal_zone%i/temp"
+#define CPU_FREQ_PATH "/sys/devices/system/cpu/cpu0/cpufreq/%s"
 
 #define PATH_MAX 256
-#define BUF_MAX 8
-#define THERSHOLD_MAX 20
+#define BUF_MAX 32
 #define PHY0 0
 #define PHY1 1
+#define NUM_VALUES 4
+
+int load_config_file=0;
+
+//#define ULOG_INFO(fmt, ...) ulog(LOG_INFO, fmt, ## __VA_ARGS__)
 
 typedef unsigned char	u8;
+typedef unsigned long	u32;
 
 u8 w2g_threshold_level=0;
 u8 w5g_threshold_level=0;
 u8 w2g_cur_temper=0;
 u8 w5g_cur_temper=0;
+u32 level_cpu_freq=1008000;
 
-
+/* default value of wifi thresholds*/
 #ifdef PLATFORM_RAP630C_311G
-u8 level_2g_lo[4]={0, 105, 110, 115};
-u8 level_2g_hi[4]={105, 110, 115, 120};
-u8 level_2g_limit[4]={0, 35, 50, 70};
-u8 level_5g_lo[4]={0, 105, 110, 115};
-u8 level_5g_hi[4]={105, 110, 115, 120};
-u8 level_5g_limit[4]={0, 20, 30, 50};
+u8 level_2g_high[4]={105, 110, 115, 120};
+u8 level_2g_low[4]={0, 105, 110, 115};
+u8 level_2g_mitigation[4]={0, 35, 50, 70};
+u8 level_5g_high[4]={105, 110, 115, 120};
+u8 level_5g_low[4]={0, 105, 110, 115};
+u8 level_5g_mitigation[4]={0, 20, 30, 50};
+u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
 #endif
 
 #ifdef PLATFORM_RAP630W_311G
-u8 level_2g_lo[4]={0, 105, 110, 115};
-u8 level_2g_hi[4]={105, 110, 115, 120};
-u8 level_2g_limit[4]={0, 20, 50, 70};
-u8 level_5g_lo[4]={0, 105, 110, 115};
-u8 level_5g_hi[4]={105, 110, 115, 120};
-u8 level_5g_limit[4]={0, 20, 50, 70};
+u8 level_2g_high[4]={105, 110, 115, 120};
+u8 level_2g_low[4]={0, 105, 110, 115};
+u8 level_2g_mitigation[4]={0, 20, 50, 70};
+u8 level_5g_high[4]={105, 110, 115, 120};
+u8 level_5g_low[4]={0, 105, 110, 115};
+u8 level_5g_mitigation[4]={0, 20, 50, 70};
+u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
 #endif
 
 static char *config_file = NULL;
-char temp[4][BUF_MAX];
 
-#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
+typedef struct {
+    int thresholds_high[NUM_VALUES];
+    int thresholds_low[NUM_VALUES];
+    int mitigation[NUM_VALUES];
+    int cpu_freq[NUM_VALUES];
+} WifiConfig;
 
-static void write_cur_state (char *filename, int state) {
+WifiConfig wifi2g = {0}, wifi5g = {0};
+
+static void set_cpu_freq (int freq) {
+	FILE * fp;
+	char filename[PATH_MAX];
+
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_governor");
+
+	fp = fopen(filename, "w");
+	if (!fp) {
+		ULOG_ERR("open scaling_governor error\n");
+	}
+	fprintf(fp, "%s", "userspace");
+	fclose(fp);
+
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_setspeed");
+
+	fp = fopen(filename, "w");
+	if (!fp) {
+		ULOG_ERR("open scaling_setspeed error\n");
+	}
+	fprintf(fp, "%d", freq);
+	fclose(fp);
+}
+
+void parse_line(const char* line, const char* key, int* array) {
+	char label[64];
+	int values[NUM_VALUES];
+	int i;
+
+	if (sscanf(line, "%s %d %d %d %d %d", label, &values[0], &values[1], &values[2], &values[3], &values[4]) == 5) {
+		for (i = 0; i < NUM_VALUES; ++i) {
+			array[i] = values[i];
+		}
+	}
+}
+
+int load_config() {
+	FILE * fp = fopen(config_file, "r");
+	if (!fp) {
+		ULOG_ERR("open config file error\n");
+		return 1;
+	}
+
+	WifiConfig* current_config = NULL;
+	char line[256];
+
+	while (fgets(line, sizeof(line), fp)) {
+		if (strstr(line, "[wifi2g]")) {
+			current_config = &wifi2g;
+		} else if (strstr(line, "[wifi5g]")) {
+			current_config = &wifi5g;
+		} else if (current_config) {
+			if (strstr(line, "thresholds_high")) {
+				parse_line(line, "thresholds_high", current_config->thresholds_high);
+			} else if (strstr(line, "thresholds_low")) {
+				parse_line(line, "thresholds_low", current_config->thresholds_low);
+			} else if (strstr(line, "mitigation")) {
+				parse_line(line, "mitigation", current_config->mitigation);
+			} else if (strstr(line, "CPU_freq")) {
+				parse_line(line, "CPU_freq", current_config->cpu_freq);
+			}
+		}
+	}
+
+	fclose(fp);
+	set_cpu_freq(wifi5g.cpu_freq[0]);
+
+	return 0;
+}
+
+int load_default_config(){
+	int i=0;
+
+	set_cpu_freq(1008000);
+	for (i = 0; i < NUM_VALUES; i++) {
+		wifi2g.thresholds_high[i]=level_2g_high[i];
+		wifi2g.thresholds_low[i]=level_2g_low[i];
+		wifi2g.mitigation[i]=level_2g_mitigation[i];
+		wifi2g.cpu_freq[i]=level_cpu_frequency[i];
+		wifi5g.thresholds_high[i]=level_5g_high[i];
+		wifi5g.thresholds_low[i]=level_5g_low[i];
+		wifi5g.mitigation[i]=level_5g_mitigation[i];
+		wifi5g.cpu_freq[i]=level_cpu_frequency[i];
+	}
+	return 0;
+
+}
+
+static void write_cur_state (const char *filename, int state) {
 	FILE * fp;
 
-	ULOG_DBG("write_cur_state filename=[%s] [%d]\n", filename, state);
 	fp = fopen(filename, "w");
 	if (!fp){
-		ULOG_ERR("some kind of error write cur_state\n");
+		ULOG_ERR("open %s file error\n",filename);
 	}
 	fprintf(fp, "%d", state);
 	fclose(fp);
 }
 
-static void read_cur_state (char *filename, char *buffer) {
-	FILE * fp;
-
+int read_cur_state(const char *filename, char *buf, size_t buffer) {
+	FILE *fp;
+	
 	fp = fopen(filename, "r");
-	if (!fp){
-		ULOG_ERR("some kind of error write cur_state\n");
+	if (!fp) {
+		ULOG_ERR("open %s file error\n",filename);
+		return -1;
 	}
-	if (0 == fread(buffer, sizeof(char), 3, fp)) {
-		ULOG_ERR("some kind of error read value\n");
+	if (!fgets(buf, buffer, fp)) {
+		ULOG_ERR("Failed to read %s file\n", filename);
+		fclose(fp);
+		return -1;
 	}
 	fclose(fp);
+	return 0;
 }
 
+
 static void wifi_get_temperature() {
 	char filename[PATH_MAX];
-	FILE * fp;
-	int i = 0;
 	char buffer[BUF_MAX];
+	int i = 0;
+
+//	ULOG_INFO("=================================\n");
+
+	/* read cpuinfo_cur_freq*/
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "cpuinfo_cur_freq");
+
+	memset(buffer, 0, BUF_MAX);
+	read_cur_state(filename, buffer, sizeof(buffer));
+//	ULOG_INFO("CPU current frequency: %s\n", buffer);
 
 	/* get current phy cooling state*/
-	for (i=0 ; i <= 1; i++ ) {
+	for (i=0; i <= 1; i++) {
 		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
-		read_cur_state(filename, buffer);
-		ULOG_DBG("read from Phy%i cur_state is %s\n", i, buffer);
+		read_cur_state(filename, buffer, sizeof(buffer));
+//		ULOG_INFO("Phy%i cur_state is: %s\n", i, buffer);
 	}
 
-	for (i=0 ; i <= 3; i++ ) {
+	for (i=0; i <= 3; i++) {
+		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, TEMPER_PATH, i);
-		fp = fopen(filename, "r");
-		if (!fp) {
-			ULOG_ERR("some kind of error open value\n");
-		}
-		memset(temp[i], 0, BUF_MAX);
-		if (0 == fread(temp[i], sizeof(char), 3, fp)) {
-			ULOG_ERR("some kind of error read value\n");
-		}
-		fclose(fp);
-		ULOG_DBG("thermal_zone%i cur_temp is %s\n", i, temp[i]);
+		read_cur_state(filename, buffer, sizeof(buffer));
+//		ULOG_INFO("thermal_zone%i cur_temp is: %s\n", i, buffer);
+
+		if (i == 0)
+			w2g_cur_temper=atoi(buffer);
+		else if (i == 3)
+			w5g_cur_temper=atoi(buffer);
 	}
 
-	w2g_cur_temper=atoi(temp[0]);
-	w5g_cur_temper=atoi(temp[3]);
+	if (w5g_cur_temper >= 120)
+	{
+		ULOG_ERR("!! Temperature is over %d degree, system will reboot\n", w5g_cur_temper);
+		sync();
+		if ( -1 != system("reboot &") ){
+			printf("sysyem reboot...\n");
+		}
+	}
 }
 
 static void wifi_set_cooling() {
 	char filename[PATH_MAX];
 	int level;
 
-	for (level=0 ; level<=3 ; level++) {
-		if (w2g_cur_temper >= level_2g_lo[level] && w2g_cur_temper < level_2g_hi[level]) {
-			ULOG_DBG("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
+	for (level = 0; level <= 3; level++) {
+		if (w2g_cur_temper >= wifi2g.thresholds_low[level] && w2g_cur_temper < wifi2g.thresholds_high[level]) {
+//			ULOG_INFO("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
 			if (w2g_threshold_level != level) {
-				ULOG_DBG("setting 2G reduce %d percent\n" ,level_2g_limit[level]);
+//				ULOG_INFO("setting 2G reduce %d percent\n" ,wifi2g.mitigation[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY0);
-				write_cur_state(filename, level_2g_limit[level]);
+				write_cur_state(filename, wifi2g.mitigation[level]);
 				w2g_threshold_level = level;
 			}
 		}
-		if (w5g_cur_temper >= level_5g_lo[level] && w5g_cur_temper < level_5g_hi[level]) {
-			ULOG_DBG("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
+		if (w5g_cur_temper >= wifi5g.thresholds_low[level] && w5g_cur_temper < wifi5g.thresholds_high[level]) {
+//			ULOG_INFO("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
 			if (w5g_threshold_level != level) {
-				ULOG_DBG("setting 5G reduce %d percent\n" ,level_5g_limit[level]);
+//				ULOG_INFO("setting 5G reduce %d percent\n" ,wifi5g.mitigation[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY1);
-				write_cur_state(filename, level_5g_limit[level]);
+				write_cur_state(filename, wifi5g.mitigation[level]);
 				w5g_threshold_level = level;
+				set_cpu_freq(wifi5g.cpu_freq[level]);
 			}
 		}
 	}
+
 }
 
+
 static void cooling_init() {
-	char filename[256];
-	int i;
+	char filename[PATH_MAX];
+	int i,result=0;
 
 	for (i=0 ; i <= 1; i++) {
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
 		write_cur_state(filename, 0);
 	}
+
+	if(load_config_file)
+		result = load_config();
+
+	if (result == 1 || load_config_file == 0)
+		load_default_config();
 }
 
 void print_usage(void)
 {
 	printf("\nWifi-cooling daemon usage\n");
 	printf("Optional arguments:\n");
-	printf("  -c <file>        config file\n");
-	printf("  -d               debug output\n");
+	printf("  -c <file>        setting with config file\n");
+	printf("  -d               default setting\n");
 	printf("  -h               this usage screen\n");
 }
 
@@ -185,17 +312,18 @@ int main(int argc, char *argv[])
 	setpriority(PRIO_PROCESS, getpid(), -20);
 
 	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "cooling");
-	ulog_threshold(LOG_INFO);
+	ulog_threshold(LOG_ERR);
+//	ulog_threshold(LOG_INFO);
 
-	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
+ 	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
 		switch (ch) {
 		case 'c':
 			printf("wifi-cooling load configuration file %s\n", optarg);
 			config_file = optarg;
+			load_config_file=1;
 			break;
 		case 'd':
-			printf("wifi-cooling ulog_threshold set to debug level\n");
-			ulog_threshold(LOG_DEBUG);
+			printf("wifi-cooling set to default value\n");
 			break;
 		case 'h':
 		default:
@@ -212,4 +340,4 @@ int main(int argc, char *argv[])
 	uloop_done();
 
 	return 0;
-}
+}

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630c-311g-cooling.conf

@@ -1,15 +1,11 @@
-sampling 5000
+[wifi2g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           35          50          70
+CPU_freq            1008000     800000      800000      800000
 
-[tsens_tz_sensor1]
-sampling 	5000
-thresholds 			105			110			115			119			120
-thresholds_clr 		0			100			105			110			115
-actions 			cooling		cooling	 	cooling		cooling		shutdown
-action_info 		0			35	 		50			70			800000
-
-[tsens_tz_sensor4]
-sampling 	5000
-thresholds 			105			110			115			119			120
-thresholds_clr 		0			100			105			110			115
-actions 			cooling		cooling		cooling		cooling		shutdown
-action_info 		0			20			30	 		50			800000
+[wifi5g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          30          50
+CPU_freq            1008000     800000      800000      800000

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630w-311g-cooling.conf

@@ -1,15 +1,11 @@
-sampling 5000
+[wifi2g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          50          70
+CPU_freq            1008000     800000      800000      800000
 
-[tsens_tz_sensor1]
-sampling 	5000
-thresholds 			105			115			119			125
-thresholds_clr 		0			105			110			120
-actions 			cooling		cooling	 	cooling		cooling
-action_info 		0			20	 		50			70
-
-[tsens_tz_sensor4]
-sampling 	5000
-thresholds 			105			115			119			125
-thresholds_clr 		0			105			110			120
-actions 			cooling		cooling		cooling		cooling
-action_info 		0			20			50	 		70
+[wifi5g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          50          70
+CPU_freq            1008000     800000      800000      800000

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -117,8 +117,6 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -162,7 +160,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		rts_threshold beacon_rate maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -261,8 +259,6 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
-	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -340,6 +336,7 @@ hostapd_common_add_bss_config() {
 		wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 	config_add_boolean wpa_strict_rekey
 	config_add_boolean wpa_disable_eapol_key_retries
+	config_add_boolean multi_psk
 
 	config_add_boolean tdls_prohibit
 
@@ -471,6 +468,9 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
+
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -724,7 +724,8 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp
+		vendor_elements fils uci_section dynamic_probe_resp multi_psk \
+		rssi_reject_assoc_rssi rssi_ignore_probe_request
 
 	set_default fils 0
 	set_default isolate 0
@@ -737,6 +738,7 @@ hostapd_set_bss_options() {
 	set_default wmm 1
 	set_default uapsd 1
 	set_default wpa_disable_eapol_key_retries 0
+	set_default multi_psk $multi_psk
 	set_default tdls_prohibit 0
 	set_default eapol_version $((wpa & 1))
 	set_default acct_port 1813
@@ -778,6 +780,8 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/ipq807x_v5.4/hostapd/files/mpskd

@@ -26,11 +26,12 @@ function event_cb_6g(req) {
 		return 0;
 
 	let ssid = iface.ssid;
-	if (!ssid || !length(ssids[ssid].keys))
+
+	if (!ssid || !ssids[ssid].mpsk)
 		return 0;
 
 	let ssid_cache = cache[ssid];
-	if (ssid_cache && ssid_cache[addr])
+	if (ssid_cache && addr in ssid_cache)
 		return 0;
 
 	if (req.type == 'probe') {
@@ -53,15 +54,15 @@ function event_cb(req) {
 		return 0;
 
 	let ssid = iface.ssid;
-	if (!ssid || !length(ssids[ssid].keys))
+	if (!ssid || !ssids[ssid].mpsk)
 		return 0;
 
 	let ssid_cache = cache[ssid];
-	if (ssid_cache && ssid_cache[addr])
+	if (ssid_cache && addr in ssid_cache)
 		return 0;
 
 	printf(`reply to ${req.type} on ${req.data.ifname} from ${addr} without 6G RNR\n`);
-	return 2; 
+	return 2;
 }
 
 function create_6g_subscriber() {
@@ -143,6 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
+			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -174,6 +176,20 @@ function iface_ssid(ifname) {
 	return iface.ssid;
 }
 
+function is_ssid_mpsk(ifname) {
+        let ssid = iface_ssid(ifname);
+        if (!ssid)
+                return false;
+
+	if (!ssids[ssid])
+		return false;
+
+        if (!ssids[ssid]?.mpsk)
+                return false;
+
+	return ssids[ssid].mpsk;
+}
+
 function sta_cache_entry_get(ssid, addr) {
 	let ssid_cache = cache[ssid] ?? {};
 
@@ -295,12 +311,15 @@ function auth_cb(msg) {
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
+		if (!is_ssid_mpsk(data.iface))
+			return;
+
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null)
+		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/ipq807x_v5.4/hostapd/patches/601-ucode_support.patch

@@ -606,12 +606,13 @@
  	for (pw = hapd->conf->sae_passwords; pw; pw = pw->next) {
  		if (!is_broadcast_ether_addr(pw->peer_addr) &&
  		    os_memcmp(pw->peer_addr, sta->addr, ETH_ALEN) != 0)
-@@ -519,6 +525,31 @@ static const char * sae_get_password(str
+@@ -519,6 +525,33 @@ static const char * sae_get_password(str
  		pt = hapd->conf->ssid.pt;
  	}
  
 +use_sta_psk:
 +	if (!password && sta) {
++		sta->psk_idx = 0;
 +		for (psk = sta->psk; psk; psk = psk->next) {
 +			if (!psk->is_passphrase)
 +				continue;
@@ -620,6 +621,7 @@
 +			if (!sta->use_sta_psk)
 +				break;
 +
++			sta->psk_idx = 1;
 +			if (sta->sae_pt) {
 +				pt = sta->sae_pt;
 +				break;
@@ -638,7 +640,7 @@
  	if (pw_entry)
  		*pw_entry = pw;
  	if (s_pt)
-@@ -3698,6 +3729,12 @@ static void handle_auth(struct hostapd_d
+@@ -3698,6 +3731,12 @@ static void handle_auth(struct hostapd_d
  		goto fail;
  	}
  
@@ -686,15 +688,15 @@
  	char *radius_cui; /* Chargeable-User-Identity from RADIUS */
 --- a/src/ap/wpa_auth_glue.c
 +++ b/src/ap/wpa_auth_glue.c
-@@ -337,6 +337,7 @@ static const u8 * hostapd_wpa_auth_get_p
- 	struct sta_info *sta = ap_get_sta(hapd, addr);
- 	const u8 *psk;
+@@ -355,6 +355,7 @@ static const u8 * hostapd_wpa_auth_get_p
+ 	}
+ #endif /* CONFIG_SAE */
  
 +	sta->psk_idx = 0;
- 	if (vlan_id)
- 		*vlan_id = 0;
- 	if (psk_len)
-@@ -381,13 +382,18 @@ static const u8 * hostapd_wpa_auth_get_p
+ #ifdef CONFIG_OWE
+ 	if ((hapd->conf->wpa_key_mgmt & WPA_KEY_MGMT_OWE) &&
+ 	    sta && sta->owe_pmk) {
+@@ -381,12 +382,17 @@ static const u8 * hostapd_wpa_auth_get_p
  	 * returned psk which should not be returned again.
  	 * logic list (all hostapd_get_psk; all sta->psk)
  	 */
@@ -702,28 +704,26 @@
 +		psk = NULL;
  	if (sta && sta->psk && !psk) {
  		struct hostapd_sta_wpa_psk_short *pos;
-+		int psk_idx;
++		int psk_idx = 1;
  
  		if (vlan_id)
  			*vlan_id = 0;
  		psk = sta->psk->psk;
-+		sta->psk_idx = psk_idx = 1;
++		if (vlan_id)
++			sta->psk_idx = psk_idx;
  		for (pos = sta->psk; pos; pos = pos->next) {
-+			psk_idx++;
  			if (pos->is_passphrase) {
  				pbkdf2_sha1(pos->passphrase,
- 					    hapd->conf->ssid.ssid,
-@@ -396,10 +402,14 @@ static const u8 * hostapd_wpa_auth_get_p
- 				pos->is_passphrase = 0;
+@@ -397,9 +403,13 @@ static const u8 * hostapd_wpa_auth_get_p
  			}
  			if (pos->psk == prev_psk) {
-+				sta->psk_idx = psk_idx;
  				psk = pos->next ? pos->next->psk : NULL;
++				if (vlan_id)
++					sta->psk_idx = psk_idx + 1;
  				break;
  			}
  		}
-+
-+		if (!psk)
++		if (vlan_id && !psk)
 +			sta->psk_idx = 0;
  	}
  	return psk;

feeds/ipq807x_v5.4/hostapd/patches/t00-013-proxy-arp-fail-gracefully.patch

@@ -0,0 +1,27 @@
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -1527,19 +1527,15 @@ int hostapd_setup_bss(struct hostapd_dat
+ 		if (x_snoop_init(hapd)) {
+ 			wpa_printf(MSG_ERROR,
+ 				   "Generic snooping infrastructure initialization failed");
+-			return -1;
+-		}
+-
+-		if (dhcp_snoop_init(hapd)) {
++			conf->proxy_arp = 0;
++		} else if (dhcp_snoop_init(hapd)) {
+ 			wpa_printf(MSG_ERROR,
+ 				   "DHCP snooping initialization failed");
+-			return -1;
+-		}
+-
+-		if (ndisc_snoop_init(hapd)) {
++			conf->proxy_arp = 0;
++		} else if (ndisc_snoop_init(hapd)) {
+ 			wpa_printf(MSG_ERROR,
+ 				   "Neighbor Discovery snooping initialization failed");
+-			return -1;
++			conf->proxy_arp = 0;
+ 		}
+ 	}
+ 

feeds/ipq807x_v5.4/hostapd/patches/zzz-FT-Store-PMK-R0-PMK-R1-after-EAPOL-Key-msg-2-4-MIC-v.patch

@@ -0,0 +1,411 @@
+From: Jouni Malinen <quic_jouni@quicinc.com>
+Date: Tue, 14 Feb 2023 11:29:30 +0200
+Subject: [PATCH] FT: Store PMK-R0/PMK-R1 after EAPOL-Key msg 2/4 MIC
+ validation
+
+hostapd was previously storing the derived PMK-R0 and PMK-R1 as soon as
+these keys were derived. While that is fine for most purposes, it is
+unnecessary to do that so quickly and if anything were to fail before
+the supplicant is able to return a valid EAPOL-Key msg 2/4, there would
+not really be any real use for the derived keys.
+
+For the special case of FT-PSK and VLAN determination based on the
+wpa_psk file, the VLAN information is set in the per-STA data structures
+only after the EAPOL-Key msg 2/4 MIC has been verified. This ended up
+storing the PMK-R0/PMK-R1 entries without correct VLAN assignment and as
+such, any use of the FT protocol would not be able to transfer the VLAN
+information through RRB.
+
+Split local storing of the FT key hierarchy for the cases using the FT
+4-way handshake so that PMK-R0 and PMK-R1 are first derived and then
+stored as a separate step after having verified the MIC in the EAPOL-Key
+msg 2/4 (i.e., after having confirmed the per-STA passphrase/PSK was
+selected) and VLAN update. This fixes VLAN information for the
+wpa_psk_file cases with FT-PSK.
+
+Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
+---
+
+--- a/src/ap/wpa_auth.c
++++ b/src/ap/wpa_auth.c
+@@ -58,7 +58,9 @@ static int wpa_group_config_group_keys(s
+ 				       struct wpa_group *group);
+ static int wpa_derive_ptk(struct wpa_state_machine *sm, const u8 *snonce,
+ 			  const u8 *pmk, unsigned int pmk_len,
+-			  struct wpa_ptk *ptk, int force_sha256);
++			  struct wpa_ptk *ptk, int force_sha256,
++			  u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			  size_t *key_len);
+ static void wpa_group_free(struct wpa_authenticator *wpa_auth,
+ 			   struct wpa_group *group);
+ static void wpa_group_get(struct wpa_authenticator *wpa_auth,
+@@ -940,6 +942,10 @@ static int wpa_try_alt_snonce(struct wpa
+ 	const u8 *pmk = NULL;
+ 	size_t pmk_len;
+ 	int vlan_id = 0;
++	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
++	u8 pmk_r1[PMK_LEN_MAX];
++	size_t key_len;
++	int ret = -1;
+ 
+ 	os_memset(&PTK, 0, sizeof(PTK));
+ 	for (;;) {
+@@ -961,8 +967,8 @@ static int wpa_try_alt_snonce(struct wpa
+ 			pmk_len = sm->pmk_len;
+ 		}
+ 
+-		if (wpa_derive_ptk(sm, sm->alt_SNonce, pmk, pmk_len, &PTK, 0) <
+-		    0)
++		if (wpa_derive_ptk(sm, sm->alt_SNonce, pmk, pmk_len, &PTK, 0,
++				   pmk_r0, pmk_r1, pmk_r0_name, &key_len) < 0)
+ 			break;
+ 
+ 		if (wpa_verify_key_mic(sm->wpa_key_mgmt, pmk_len, &PTK,
+@@ -983,7 +989,7 @@ static int wpa_try_alt_snonce(struct wpa
+ 	if (!ok) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "WPA: Earlier SNonce did not result in matching MIC");
+-		return -1;
++		goto fail;
+ 	}
+ 
+ 	wpa_printf(MSG_DEBUG,
+@@ -992,14 +998,26 @@ static int wpa_try_alt_snonce(struct wpa
+ 
+ 	if (vlan_id && wpa_key_mgmt_wpa_psk(sm->wpa_key_mgmt) &&
+ 	    wpa_auth_update_vlan(sm->wpa_auth, sm->addr, vlan_id) < 0)
+-		return -1;
++		goto fail;
++
++#ifdef CONFIG_IEEE80211R_AP
++	if (wpa_key_mgmt_ft(sm->wpa_key_mgmt) && !sm->ft_completed) {
++		wpa_printf(MSG_DEBUG, "FT: Store PMK-R0/PMK-R1");
++		wpa_auth_ft_store_keys(sm, pmk_r0, pmk_r1, pmk_r0_name,
++				       key_len);
++	}
++#endif /* CONFIG_IEEE80211R_AP */
+ 
+ 	os_memcpy(sm->SNonce, sm->alt_SNonce, WPA_NONCE_LEN);
+ 	os_memcpy(&sm->PTK, &PTK, sizeof(PTK));
+ 	forced_memzero(&PTK, sizeof(PTK));
+ 	sm->PTK_valid = true;
+ 
+-	return 0;
++	ret = 0;
++fail:
++	forced_memzero(pmk_r0, sizeof(pmk_r0));
++	forced_memzero(pmk_r1, sizeof(pmk_r1));
++	return ret;
+ }
+ 
+ 
+@@ -2283,7 +2301,9 @@ SM_STATE(WPA_PTK, PTKSTART)
+ 
+ static int wpa_derive_ptk(struct wpa_state_machine *sm, const u8 *snonce,
+ 			  const u8 *pmk, unsigned int pmk_len,
+-			  struct wpa_ptk *ptk, int force_sha256)
++			  struct wpa_ptk *ptk, int force_sha256,
++			  u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			  size_t *key_len)
+ {
+ 	const u8 *z = NULL;
+ 	size_t z_len = 0, kdk_len;
+@@ -2311,7 +2331,8 @@ static int wpa_derive_ptk(struct wpa_sta
+ 						 sm->pairwise,
+ 						 kdk_len);
+ 		}
+-		return wpa_auth_derive_ptk_ft(sm, ptk);
++		return wpa_auth_derive_ptk_ft(sm, ptk, pmk_r0, pmk_r1,
++					      pmk_r0_name, key_len);
+ 	}
+ #endif /* CONFIG_IEEE80211R_AP */
+ 
+@@ -2934,6 +2955,9 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	struct wpa_eapol_ie_parse kde;
+ 	int vlan_id = 0;
+ 	int owe_ptk_workaround = !!wpa_auth->conf.owe_ptk_workaround;
++	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
++	u8 pmk_r1[PMK_LEN_MAX];
++	size_t key_len;
+ 
+ 	SM_ENTRY_MA(WPA_PTK, PTKCALCNEGOTIATING, wpa_ptk);
+ 	sm->EAPOLKeyReceived = false;
+@@ -2972,7 +2996,8 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		}
+ 
+ 		if (wpa_derive_ptk(sm, sm->SNonce, pmk, pmk_len, &PTK,
+-				   owe_ptk_workaround == 2) < 0)
++				   owe_ptk_workaround == 2, pmk_r0, pmk_r1,
++				   pmk_r0_name, &key_len) < 0)
+ 			break;
+ 
+ 		if (mic_len &&
+@@ -3021,7 +3046,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 						 sm->last_rx_eapol_key,
+ 						 sm->last_rx_eapol_key_len);
+ 		sm->waiting_radius_psk = 1;
+-		return;
++		goto out;
+ 	}
+ 
+ 	if (!ok) {
+@@ -3029,7 +3054,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 				"invalid MIC in msg 2/4 of 4-Way Handshake");
+ 		if (psk_found)
+ 			wpa_auth_psk_failure_report(sm->wpa_auth, sm->addr);
+-		return;
++		goto out;
+ 	}
+ 
+ 	/*
+@@ -3043,12 +3068,12 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	key_data_length = WPA_GET_BE16(mic + mic_len);
+ 	if (key_data_length > sm->last_rx_eapol_key_len - sizeof(*hdr) -
+ 	    sizeof(*key) - mic_len - 2)
+-		return;
++		goto out;
+ 
+ 	if (wpa_parse_kde_ies(key_data, key_data_length, &kde) < 0) {
+ 		wpa_auth_vlogger(wpa_auth, sm->addr, LOGGER_INFO,
+ 				 "received EAPOL-Key msg 2/4 with invalid Key Data contents");
+-		return;
++		goto out;
+ 	}
+ 	if (kde.rsn_ie) {
+ 		eapol_key_ie = kde.rsn_ie;
+@@ -3075,7 +3100,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		/* MLME-DEAUTHENTICATE.request */
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ 	if ((!sm->rsnxe && kde.rsnxe) ||
+ 	    (sm->rsnxe && !kde.rsnxe) ||
+@@ -3091,7 +3116,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		/* MLME-DEAUTHENTICATE.request */
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ #ifdef CONFIG_OCV
+ 	if (wpa_auth_uses_ocv(sm)) {
+@@ -3103,14 +3128,14 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 		if (wpa_channel_info(wpa_auth, &ci) != 0) {
+ 			wpa_auth_logger(wpa_auth, sm->addr, LOGGER_INFO,
+ 					"Failed to get channel info to validate received OCI in EAPOL-Key 2/4");
+-			return;
++			goto out;
+ 		}
+ 
+ 		if (get_sta_tx_parameters(sm,
+ 					  channel_width_to_int(ci.chanwidth),
+ 					  ci.seg1_idx, &tx_chanwidth,
+ 					  &tx_seg1_idx) < 0)
+-			return;
++			goto out;
+ 
+ 		res = ocv_verify_tx_params(kde.oci, kde.oci_len, &ci,
+ 					   tx_chanwidth, tx_seg1_idx);
+@@ -3127,7 +3152,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 					OCV_FAILURE "addr=" MACSTR
+ 					" frame=eapol-key-m2 error=%s",
+ 					MAC2STR(sm->addr), ocv_errorstr);
+-			return;
++			goto out;
+ 		}
+ 	}
+ #endif /* CONFIG_OCV */
+@@ -3135,7 +3160,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	if (ft && ft_check_msg_2_of_4(wpa_auth, sm, &kde) < 0) {
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ #endif /* CONFIG_IEEE80211R_AP */
+ #ifdef CONFIG_P2P
+@@ -3171,7 +3196,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 				   "DPP: Peer indicated it supports PFS and local configuration allows this, but PFS was not negotiated for the association");
+ 			wpa_sta_disconnect(wpa_auth, sm->addr,
+ 					   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-			return;
++			goto out;
+ 		}
+ 	}
+ #endif /* CONFIG_DPP2 */
+@@ -3191,7 +3216,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 				    sm->sup_pmk_r1_name, WPA_PMK_NAME_LEN);
+ 			wpa_hexdump(MSG_DEBUG, "FT: Derived PMKR1Name",
+ 				    sm->pmk_r1_name, WPA_PMK_NAME_LEN);
+-			return;
++			goto out;
+ 		}
+ 	}
+ #endif /* CONFIG_IEEE80211R_AP */
+@@ -3200,7 +3225,7 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 	    wpa_auth_update_vlan(wpa_auth, sm->addr, vlan_id) < 0) {
+ 		wpa_sta_disconnect(wpa_auth, sm->addr,
+ 				   WLAN_REASON_PREV_AUTH_NOT_VALID);
+-		return;
++		goto out;
+ 	}
+ 
+ 	sm->pending_1_of_4_timeout = 0;
+@@ -3216,9 +3241,20 @@ SM_STATE(WPA_PTK, PTKCALCNEGOTIATING)
+ 
+ 	sm->MICVerified = true;
+ 
++#ifdef CONFIG_IEEE80211R_AP
++	if (wpa_key_mgmt_ft(sm->wpa_key_mgmt) && !sm->ft_completed) {
++		wpa_printf(MSG_DEBUG, "FT: Store PMK-R0/PMK-R1");
++		wpa_auth_ft_store_keys(sm, pmk_r0, pmk_r1, pmk_r0_name,
++				       key_len);
++	}
++#endif /* CONFIG_IEEE80211R_AP */
++
+ 	os_memcpy(&sm->PTK, &PTK, sizeof(PTK));
+ 	forced_memzero(&PTK, sizeof(PTK));
+ 	sm->PTK_valid = true;
++out:
++	forced_memzero(pmk_r0, sizeof(pmk_r0));
++	forced_memzero(pmk_r1, sizeof(pmk_r1));
+ }
+ 
+ 
+--- a/src/ap/wpa_auth_ft.c
++++ b/src/ap/wpa_auth_ft.c
+@@ -2175,13 +2175,13 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
+ }
+ 
+ 
+-int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk)
++int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk,
++			   u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			   size_t *key_len)
+ {
+-	u8 pmk_r0[PMK_LEN_MAX], pmk_r0_name[WPA_PMK_NAME_LEN];
+ 	size_t pmk_r0_len = wpa_key_mgmt_sha384(sm->wpa_key_mgmt) ?
+ 		SHA384_MAC_LEN : PMK_LEN;
+ 	size_t pmk_r1_len = pmk_r0_len;
+-	u8 pmk_r1[PMK_LEN_MAX];
+ 	u8 ptk_name[WPA_PMK_NAME_LEN];
+ 	const u8 *mdid = sm->wpa_auth->conf.mobility_domain;
+ 	const u8 *r0kh = sm->wpa_auth->conf.r0_key_holder;
+@@ -2189,13 +2189,6 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
+ 	const u8 *r1kh = sm->wpa_auth->conf.r1_key_holder;
+ 	const u8 *ssid = sm->wpa_auth->conf.ssid;
+ 	size_t ssid_len = sm->wpa_auth->conf.ssid_len;
+-	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
+-	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
+-	struct vlan_description vlan;
+-	struct rate_description rate;
+-	const u8 *identity, *radius_cui;
+-	size_t identity_len, radius_cui_len;
+-	int session_timeout;
+ 	const u8 *mpmk;
+ 	size_t mpmk_len;
+ 
+@@ -2211,10 +2204,41 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
+ 		return -1;
+ 	}
+ 
++	*key_len = pmk_r0_len;
++	if (wpa_derive_pmk_r0(mpmk, mpmk_len, ssid, ssid_len, mdid,
++			      r0kh, r0kh_len, sm->addr,
++			      pmk_r0, pmk_r0_name,
++			      pmk_r0_len == SHA384_MAC_LEN) < 0 ||
++	    wpa_derive_pmk_r1(pmk_r0, pmk_r0_len, pmk_r0_name, r1kh, sm->addr,
++			      pmk_r1, sm->pmk_r1_name) < 0)
++		return -1;
++
++	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
++				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
++				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise,
++				 0);
++}
++
++
++void wpa_auth_ft_store_keys(struct wpa_state_machine *sm, const u8 *pmk_r0,
++			    const u8 *pmk_r1, const u8 *pmk_r0_name,
++			    size_t key_len)
++{
++	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
++	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
++	struct vlan_description vlan;
++	struct rate_description rate;
++	const u8 *identity, *radius_cui;
++	size_t identity_len, radius_cui_len;
++	int session_timeout;
++
++	if (psk_local && wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
++		return;
++
+ 	if (wpa_ft_get_vlan(sm->wpa_auth, sm->addr, &vlan) < 0) {
+ 		wpa_printf(MSG_DEBUG, "FT: vlan not available for STA " MACSTR,
+ 			   MAC2STR(sm->addr));
+-		return -1;
++		return;
+ 	}
+ 
+ 	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
+@@ -2224,32 +2248,16 @@ int wpa_auth_derive_ptk_ft(struct wpa_st
+ 					       &radius_cui);
+ 	session_timeout = wpa_ft_get_session_timeout(sm->wpa_auth, sm->addr);
+ 
+-	if (wpa_derive_pmk_r0(mpmk, mpmk_len, ssid, ssid_len, mdid,
+-			      r0kh, r0kh_len, sm->addr,
+-			      pmk_r0, pmk_r0_name,
+-			      wpa_key_mgmt_sha384(sm->wpa_key_mgmt)) < 0)
+-		return -1;
+-	if (!psk_local || !wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
+-		wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, pmk_r0_len,
+-				    pmk_r0_name,
+-				    sm->pairwise, &vlan, expires_in,
+-				    session_timeout, identity, identity_len,
+-				    radius_cui, radius_cui_len, &rate);
+-
+-	if (wpa_derive_pmk_r1(pmk_r0, pmk_r0_len, pmk_r0_name, r1kh, sm->addr,
+-			      pmk_r1, sm->pmk_r1_name) < 0)
+-		return -1;
+-	if (!psk_local || !wpa_key_mgmt_ft_psk(sm->wpa_key_mgmt))
+-		wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, pmk_r1_len,
+-				    sm->pmk_r1_name, sm->pairwise, &vlan,
+-				    expires_in, session_timeout, identity,
+-				    identity_len, radius_cui, radius_cui_len,
+-				    &rate);
+-
+-	return wpa_pmk_r1_to_ptk(pmk_r1, pmk_r1_len, sm->SNonce, sm->ANonce,
+-				 sm->addr, sm->wpa_auth->addr, sm->pmk_r1_name,
+-				 ptk, ptk_name, sm->wpa_key_mgmt, sm->pairwise,
+-				 0);
++	wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, key_len,
++			    pmk_r0_name,
++			    sm->pairwise, &vlan, expires_in,
++			    session_timeout, identity, identity_len,
++			    radius_cui, radius_cui_len, &rate);
++
++	wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, key_len,
++			    sm->pmk_r1_name, sm->pairwise, &vlan,
++			    expires_in, session_timeout, identity,
++			    identity_len, radius_cui, radius_cui_len, &rate);
+ }
+ 
+ 
+--- a/src/ap/wpa_auth_i.h
++++ b/src/ap/wpa_auth_i.h
+@@ -302,7 +302,12 @@ int wpa_write_ftie(struct wpa_auth_confi
+ 		   const u8 *anonce, const u8 *snonce,
+ 		   u8 *buf, size_t len, const u8 *subelem,
+ 		   size_t subelem_len, int rsnxe_used);
+-int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk);
++int wpa_auth_derive_ptk_ft(struct wpa_state_machine *sm, struct wpa_ptk *ptk,
++			   u8 *pmk_r0, u8 *pmk_r1, u8 *pmk_r0_name,
++			   size_t *key_len);
++void wpa_auth_ft_store_keys(struct wpa_state_machine *sm, const u8 *pmk_r0,
++			    const u8 *pmk_r1, const u8 *pmk_r0_name,
++			    size_t key_len);
+ struct wpa_ft_pmk_cache * wpa_ft_pmk_cache_init(void);
+ void wpa_ft_pmk_cache_deinit(struct wpa_ft_pmk_cache *cache);
+ void wpa_ft_install_ptk(struct wpa_state_machine *sm, int retry);

feeds/ipq807x_v5.4/hostapd/patches/zzz-ignore-probe-event.patch

@@ -0,0 +1,14 @@
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
+ 	int ubus_response;
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+-	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
++	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
++		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
+ 		return;
++	}
+ 
+ 	if (len < IEEE80211_HDRLEN)
+ 		return;

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1944,6 +1944,21 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
+{
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	if (!addr)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", addr);
+	blobmsg_add_u32(&b, "rssi", rssi);
+
+	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
+}
+
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.h

@@ -56,6 +56,7 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -24,6 +24,11 @@ cybertan,eww631-a1|\
 cybertan,eww631-b1)
         ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;
+sonicfi,rap630w-312g)
+	ucidef_set_led_default "power" "POWER" "red:power" "on"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	;;
 sonicfi,rap630c-311g|\
 sonicfi,rap630w-311g)
         ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
@@ -35,6 +40,11 @@ edgecore,oap101e-6e)
 	ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1"
         ucidef_set_led_default "power" "POWER" "blue:management" "on"
 	;;
+emplus,wap385c)
+	ucidef_set_led_default "ledr" "LEDR" "sys:red" "on"
+	ucidef_set_led_default "ledg" "LEDG" "sys:green" "on"
+	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
+	;;
 hfcl,ion4x_w|\
 hfcl,ion4xi_w)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -13,10 +13,10 @@ qcom_setup_interfaces()
 
 	case $board in
 	cig,wf186w)
-		ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6@eth0"
+		ucidef_add_switch "switch0" "4:wan" "0:lan" "1:lan" "2:lan" "3:lan" "6u@eth0"
 		;;
 	cig,wf186h)
-		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6@eth0"
+		ucidef_add_switch "switch0" "4:wan" "1:lan" "2:lan" "6u@eth0"
 		;;
 	sonicfi,rap630c-311g|\
 	cybertan,eww631-a1)
@@ -25,7 +25,7 @@ qcom_setup_interfaces()
 		;;
 	sonicfi,rap630w-311g|\
 	cybertan,eww631-b1)
-		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6@eth0"
+		ucidef_add_switch "switch1" "5:wan" "2:lan" "3:lan" "4:lan" "6u@eth0"
 		;;
 	udaya,a6-id2)
 		ucidef_set_interface_wan "eth1"
@@ -46,8 +46,9 @@ qcom_setup_interfaces()
 	edgecore,eap104)
 		ucidef_set_interface_wan "eth0"
 		ucidef_add_switch "switch1" \
-			"6@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
+	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
 		ucidef_set_interface_wan "eth0"
@@ -59,12 +60,13 @@ qcom_setup_interfaces()
                 ucidef_set_interface_wan "eth0"
                 ucidef_set_interface_lan "eth1"
                 ;;
+	sonicfi,rap630w-312g|\
 	yuncore,fap655)
 		ucidef_add_switch "switch1" \
-			"6@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+			"6u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 		;;
 	glinet,b3000)
-		ucidef_add_switch "switch1" "6@eth1" "1:wan" "2:lan" "3:lan"
+		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
 	esac
 }

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -121,6 +121,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	cig,wf186h|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
+	sonicfi,rap630w-312g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -128,6 +129,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
+	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	optimcloud,d60|\
@@ -149,12 +151,14 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	cig,wf186h|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
+	sonicfi,rap630w-312g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
+	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
@@ -217,6 +221,7 @@ ath11k-macs)
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
+	sonicfi,rap630w-312g|\
 	yuncore,fap655)
 		ath11k_generate_macs
 		;;

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -6,26 +6,27 @@ board=$(board_name)
 
 case "$board" in
     "edgecore,eap101")
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
-    "edgecore,eap102")
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+    "edgecore,eap102"|\
+    "edgecore,oap103")
+        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,oap101e-6e"|\
     "edgecore,oap101-6e")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy6g
         ;;
     "edgecore,oap101e"|\
     "edgecore,oap101")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ;;
     "edgecore,eap104")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ;;
 esac

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -72,9 +72,11 @@ platform_check_image() {
 	cig,wf186h|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
+	sonicfi,rap630w-312g|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
+	emplus,wap385c|\
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
@@ -128,6 +130,7 @@ platform_do_upgrade() {
                 ;;
 	cig,wf186w|\
 	cig,wf186h|\
+	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	wallys,dr5018|\
@@ -142,19 +145,20 @@ platform_do_upgrade() {
 		}
 		nand_upgrade_tar "$1"
 		;;
+	cybertan,eww631-a1|\
+	cybertan,eww631-b1|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	cybertan,eww631-a1|\
-	cybertan,eww631-b1)
+	sonicfi,rap630w-312g)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)
-		echo "Current bootfrom is $boot_part"
-		if [[ $boot_part == 1 ]]; then
-			CI_UBIPART="rootfs"
-			CI_FWSETENV="bootfrom 0"
-		else
-			CI_UBIPART="rootfs_1"
-			CI_FWSETENV="bootfrom 1"
-		fi
+			echo "Current bootfrom is $boot_part"
+			if [[ $boot_part == 1 ]]; then
+				CI_UBIPART="rootfs"
+				CI_FWSETENV="bootfrom 0"
+			elif [[ $boot_part == 0 ]]; then
+				CI_UBIPART="rootfs_1"
+				CI_FWSETENV="bootfrom 1"
+			fi
 		nand_upgrade_tar "$1"
 		;;
 	esac

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap385c.dts

@@ -0,0 +1,760 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP385C";
+	compatible = "emplus,wap385c", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet1 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 23 0>;
+
+			ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x18>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	poe_dc_pins: poe_dc_pins {
+		T2P_DET {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		12V_DET {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pinmux {
+		linux,phandle = <0x4d>;
+		phandle = <0x4d>;
+
+		led_G {
+			pins = "gpio24";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+
+		led_B {
+			pins = "gpio28";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+
+		led_R {
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@24 {
+			label = "sys:green";
+			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@28 {
+			label = "sys:blue";
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_power: led@38 {
+			label = "sys:red";
+			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap385c:sys:red";
+			default-state = "on";
+		};
+	};
+
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-eww631-a1.dts

@@ -817,10 +817,9 @@
 	qcom,board_id = <0x24>;
 #ifdef __CNSS2__
 	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0 0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
 	qcom,caldb-size = <0x200000>;
 	mem-region = <&q6_ipq5018_data>;
-1235
 #else
 	memory-region = <&q6_ipq5018_data>;
 #endif

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-eww631-b1.dts

@@ -173,40 +173,40 @@
 	 * |   data   |              |                         |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          14MB           |
+	 * |   data   |  0x4C400000  |          13MB           |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * |  Caldb   |  0x4D300000  |           2MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D600000  |          16MB           |
+	 * |   data   |  0x4D500000  |          13MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * |  Caldb   |  0x4E400000  |           5MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4ED00000  |          16MB           |
+	 * |   data   |  0x4E900000  |          13MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * |  M3 Dump |  0x4F600000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * |   QDSS   |  0x4F700000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * |  Caldb   |  0x4F800000  |           5MB           |
 	 * +----------+--------------+-------------------------+
 	 * |                                                   |
 	 * |            Rest of the memory for Linux           |
@@ -215,7 +215,7 @@
 	 */
 		q6_mem_regions: q6_mem_regions@4B000000 {
 			no-map;
-			reg = <0x0 0x4B000000 0x0 0x5400000>;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
 		};
 
 		q6_code_data: q6_code_data@4B000000 {
@@ -225,62 +225,62 @@
 
 		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
 			no-map;
-			reg = <0x0 0x4C400000 0x0 0xE00000>;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
 		};
 
-		m3_dump: m3_dump@4D200000 {
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
 			no-map;
 			reg = <0x0 0x4D200000 0x0 0x100000>;
 		};
 
-		q6_etr_region: q6_etr_dump@4D300000 {
+		q6_caldb_region: q6_caldb_region@4D300000 {
 			no-map;
-			reg = <0x0 0x4D300000 0x0 0x100000>;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
 		};
 
-		q6_caldb_region: q6_caldb_region@4D400000 {
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
 			no-map;
-			reg = <0x0 0x4D400000 0x0 0x200000>;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
 		};
 
-		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
 			no-map;
-			reg = <0x0 0x4D600000 0x0 0x1000000>;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
 		};
 
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
 			no-map;
-			reg = <0x0 0x4E600000 0x0 0x100000>;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
 		};
 
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
 			no-map;
-			reg = <0x0 0x4E700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
-			no-map;
-			reg = <0x0 0x4E800000 0x0 0x500000>;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
 		};
 
 		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
 			no-map;
-			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+			reg = <0x0 0x4E900000 0x0 0xD00000>;
 		};
 
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
 			no-map;
-			reg = <0x0 0x4FD00000 0x0 0x100000>;
+			reg = <0x0 0x4F600000 0x0 0x100000>;
 		};
 
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
 			no-map;
-			reg = <0x0 0x4FE00000 0x0 0x100000>;
+			reg = <0x0 0x4F700000 0x0 0x100000>;
 		};
 
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
 			no-map;
-			reg = <0x0 0x4FF00000 0x0 0x500000>;
+			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
 	#endif
@@ -883,8 +883,8 @@
 #endif
 	qcom,board_id = <0x24>;
 #ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0 0>;
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
 	qcom,caldb-size = <0x200000>;
 	mem-region = <&q6_ipq5018_data>;
 #else

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630c-311g.dts

@@ -816,10 +816,9 @@
 	qcom,board_id = <0x24>;
 #ifdef __CNSS2__
 	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0 0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
 	qcom,caldb-size = <0x200000>;
 	mem-region = <&q6_ipq5018_data>;
-1235
 #else
 	memory-region = <&q6_ipq5018_data>;
 #endif

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-311g.dts

@@ -175,40 +175,40 @@
 	 * |   data   |              |                         |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |   data   |  0x4C400000  |          14MB           |
+	 * |   data   |  0x4C400000  |          13MB           |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * |  IPQ5018 |              |                         |
-	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * |  Caldb   |  0x4D300000  |           2MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |   data   |  0x4D600000  |          16MB           |
+	 * |   data   |  0x4D500000  |          13MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_1|              |                         |
-	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * |  Caldb   |  0x4E400000  |           5MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |   data   |  0x4ED00000  |          16MB           |
+	 * |   data   |  0x4E900000  |          13MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * |  M3 Dump |  0x4F600000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * |   QDSS   |  0x4F700000  |           1MB           |
 	 * +----------+--------------+-------------------------+
 	 * | QCN6122_2|              |                         |
-	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * |  Caldb   |  0x4F800000  |           5MB           |
 	 * +----------+--------------+-------------------------+
 	 * |                                                   |
 	 * |            Rest of the memory for Linux           |
@@ -217,7 +217,7 @@
 	 */
 		q6_mem_regions: q6_mem_regions@4B000000 {
 			no-map;
-			reg = <0x0 0x4B000000 0x0 0x5400000>;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
 		};
 
 		q6_code_data: q6_code_data@4B000000 {
@@ -227,62 +227,62 @@
 
 		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
 			no-map;
-			reg = <0x0 0x4C400000 0x0 0xE00000>;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
 		};
 
-		m3_dump: m3_dump@4D200000 {
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
 			no-map;
 			reg = <0x0 0x4D200000 0x0 0x100000>;
 		};
 
-		q6_etr_region: q6_etr_dump@4D300000 {
+		q6_caldb_region: q6_caldb_region@4D300000 {
 			no-map;
-			reg = <0x0 0x4D300000 0x0 0x100000>;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
 		};
 
-		q6_caldb_region: q6_caldb_region@4D400000 {
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
 			no-map;
-			reg = <0x0 0x4D400000 0x0 0x200000>;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
 		};
 
-		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
 			no-map;
-			reg = <0x0 0x4D600000 0x0 0x1000000>;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
 		};
 
-		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
 			no-map;
-			reg = <0x0 0x4E600000 0x0 0x100000>;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
 		};
 
-		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
 			no-map;
-			reg = <0x0 0x4E700000 0x0 0x100000>;
-		};
-
-		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
-			no-map;
-			reg = <0x0 0x4E800000 0x0 0x500000>;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
 		};
 
 		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
 			no-map;
-			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+			reg = <0x0 0x4E900000 0x0 0xD00000>;
 		};
 
-		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
 			no-map;
-			reg = <0x0 0x4FD00000 0x0 0x100000>;
+			reg = <0x0 0x4F600000 0x0 0x100000>;
 		};
 
-		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
 			no-map;
-			reg = <0x0 0x4FE00000 0x0 0x100000>;
+			reg = <0x0 0x4F700000 0x0 0x100000>;
 		};
 
-		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
 			no-map;
-			reg = <0x0 0x4FF00000 0x0 0x500000>;
+			reg = <0x0 0x4F800000 0x0 0x500000>;
 		};
 
 	#endif
@@ -894,8 +894,8 @@
 #endif
 	qcom,board_id = <0x24>;
 #ifdef __CNSS2__
-	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0 0x0>;
-	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0 0>;
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
 	qcom,caldb-size = <0x200000>;
 	mem-region = <&q6_ipq5018_data>;
 #else

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630w-312g.dts

@@ -0,0 +1,908 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Sonicfi RAP630W-312G";
+	compatible = "sonicfi,rap630w-312g", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet1 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4E900000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
+			no-map;
+			reg = <0x0 0x4F600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
+			no-map;
+			reg = <0x0 0x4F700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
+			no-map;
+			reg = <0x0 0x4F800000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 16 0>;
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+			ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						phy_dac = <0x10 0x10>;
+						mdio-bus = <&mdio0>;
+					};
+					port@1 {
+						mdio-bus = <&mdio0>;
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <&tlmm 0x10 0>;   /* gpio 16 */
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x3e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+					port@4 {
+						port_id = <5>;
+						phy_address = <4>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio23", "gpio25", "gpio24", "gpio26";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+//	phy_led_pins: phy_led_pins {
+//		gephy_led_pin {
+//			pins = "gpio50";
+//			function = "led0";
+//			drive-strength = <8>;
+//			bias-pull-down;
+//		};
+//	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_sys {
+			pins = "gpio24";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_5g {
+			pins = "gpio22";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_2g {
+			pins = "gpio23";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_onekey {
+	            pins = "gpio46";
+        	    function = "gpio";
+        	    drive-strength = <8>;
+        	    bias-pull-down;
+        	}; 
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+		button@1 {
+			label = "restart";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+  	      compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power: led24 {
+			label = "red:power";
+			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+			default-state = "on";
+		};
+
+		led22 {
+			label = "green:wifi5";
+			gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led23 {
+			label = "green:wifi2";
+			gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+		led46 {
+  			label = "led_onekey";
+			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;  
+			linux,default-trigger = "led_onekey";
+			default-state = "off";
+		};
+	};
+
+
+	 gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+					<&wcss_smp2p_out 17>,
+					<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+					<&wcss_smp2p_in 25 0>,
+					<&wcss_smp2p_in 28 0>,
+					<&wcss_smp2p_in 27 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+					<&wcss_smp2p_out 25>,
+					<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef	__IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+	#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+	#endif
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x23>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,rproc = <&q6_wcss_pd3>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0xb0>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
+	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data2>;
+#else
+	memory-region = <&q6_qcn6122_data2>;
+#endif
+	status = "disabled";
+};
+
+&usb3 {
+       status = "ok";
+       /* device-power-gpio = <&tlmm 24 1>; */
+};
+
+&dwc_0 {
+       /delete-property/ #phy-cells;
+       /delete-property/ phys;
+       /delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+       status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -40,6 +40,17 @@ define Device/cybertan_eww631_b1
 endef
 TARGET_DEVICES += cybertan_eww631_b1
 
+define Device/sonicfi_rap630w_312g
+  DEVICE_TITLE := Sonicfi RAP630W-312G
+  DEVICE_DTS := qcom-ipq5018-rap630w-312g
+  SUPPORTED_DEVICES := sonicfi,rap630w-312g
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630w-312g ath11k-firmware-ipq50xx-map-spruce \
+                     -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3 \
+                     kmod-usb-uas kmod-fs-msdos kmod-fs-ntfs
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += sonicfi_rap630w_312g
+
 define Device/sonicfi_rap630c_311g
   DEVICE_TITLE := Sonicfi RAP630C-311G
   DEVICE_DTS := qcom-ipq5018-rap630c-311g
@@ -143,6 +154,15 @@ define Device/edgecore_oap101e_6e
 endef
 TARGET_DEVICES += edgecore_oap101e_6e
 
+define Device/emplus_wap385c
+  DEVICE_TITLE := Emplus WAP385C
+  DEVICE_DTS := qcom-ipq5018-emplus-wap385c
+  SUPPORTED_DEVICES := emplus,wap385c
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap385c ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += emplus_wap385c
+
 define Device/hfcl_ion4x_w
   DEVICE_TITLE := HFCL ION4x_w
   DEVICE_DTS := qcom-ipq5018-hfcl-ion4x_w

feeds/ipq807x_v5.4/ipq50xx/modules.mk

@@ -52,6 +52,183 @@ define KernelPackage/tpm-tis-i2c/description
 endef
 $(eval $(call KernelPackage,tpm-tis-i2c))
 
+define KernelPackage/usb-dwc3-internal
+  TITLE:=DWC3 USB controller driver
+  DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget
+  KCONFIG:= \
+        CONFIG_USB_DWC3 \
+        CONFIG_USB_DWC3_HOST=n \
+        CONFIG_USB_DWC3_GADGET=n \
+        CONFIG_USB_DWC3_DUAL_ROLE=y \
+        CONFIG_EXTCON=y \
+        CONFIG_USB_DWC3_DEBUG=n \
+        CONFIG_USB_DWC3_VERBOSE=n
+  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3.ko
+  AUTOLOAD:=$(call AutoLoad,84,dwc3)
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-internal/description
+ This driver provides support for the Dual Role SuperSpeed
+ USB Controller based on the Synopsys DesignWare USB3 IP Core
+endef
+
+$(eval $(call KernelPackage,usb-dwc3-internal))
+
+define KernelPackage/usb-dwc3-qcom-internal
+  TITLE:=DWC3 QTI USB driver
+  DEPENDS:=@!LINUX_4_14 @(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x||TARGET_ipq60xx||TARGET_ipq95xx||TARGET_ipq50xx||TARGET_ipq53xx) +kmod-usb-dwc3-internal
+  KCONFIG:= CONFIG_USB_DWC3_QCOM
+  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
+  AUTOLOAD:=$(call AutoLoad,83,dwc3-qcom)
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-qcom-internal/description
+ Some QTI SoCs use DesignWare Core IP for USB2/3 functionality.
+ This driver also handles Qscratch wrapper which is needed for
+ peripheral mode support.
+endef
+
+$(eval $(call KernelPackage,usb-dwc3-qcom-internal))
+
+define KernelPackage/usb-configfs
+ TITLE:= USB functions
+  KCONFIG:=CONFIG_USB_CONFIGFS \
+	CONFIG_USB_CONFIGFS_SERIAL=n \
+	CONFIG_USB_CONFIGFS_ACM=n \
+	CONFIG_USB_CONFIGFS_OBEX=n \
+	CONFIG_USB_CONFIGFS_NCM=n \
+	CONFIG_USB_CONFIGFS_ECM=n \
+	CONFIG_USB_CONFIGFS_ECM_SUBSET=n \
+	CONFIG_USB_CONFIGFS_RNDIS=n \
+	CONFIG_USB_CONFIGFS_EEM=n \
+	CONFIG_USB_CONFIGFS_MASS_STORAGE=n \
+	CONFIG_USB_CONFIGFS_F_LB_SS=n \
+	CONFIG_USB_CONFIGFS_F_FS=n \
+	CONFIG_USB_CONFIGFS_F_UAC1=n \
+	CONFIG_USB_CONFIGFS_F_UAC2=n \
+	CONFIG_USB_CONFIGFS_F_MIDI=n \
+	CONFIG_USB_CONFIGFS_F_HID=n \
+	CONFIG_USB_CONFIGFS_F_PRINTER=n \
+	CONFIG_USB_CONFIGFS_F_QDSS=n
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-configfs/description
+ USB functions
+endef
+
+$(eval $(call KernelPackage,usb-configfs))
+
+define KernelPackage/usb-f-diag
+  TITLE:=USB DIAG
+  KCONFIG:=CONFIG_USB_F_DIAG \
+	CONFIG_USB_CONFIGFS_F_DIAG=y \
+	CONFIG_DIAG_OVER_USB=y
+  DEPENDS:=+kmod-usb-lib-composite +kmod-usb-configfs
+  FILES:=$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_diag.ko
+  AUTOLOAD:=$(call AutoLoad,52,usb_f_diag)
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-f-diag/description
+ USB DIAG
+endef
+
+$(eval $(call KernelPackage,usb-f-diag))
+
+define KernelPackage/usb-uas
+  TITLE:=USB Attched SCSI support
+  DEPENDS:= +kmod-scsi-core +kmod-usb-storage
+  KCONFIG:=CONFIG_USB_UAS
+  FILES:=$(LINUX_DIR)/drivers/usb/storage/uas.ko
+  AUTOLOAD:=$(call AutoProbe,uas)
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-uas/description
+ Kernel support for USB Attached SCSI devices (UAS)
+endef
+
+$(eval $(call KernelPackage,usb-uas))
+
+
+define KernelPackage/diag-char
+  TITLE:=CHAR DIAG
+  KCONFIG:= CONFIG_DIAG_MHI=y@ge5.4 \
+	  CONFIG_DIAG_OVER_PCIE=n@ge5.4 \
+	  CONFIG_DIAGFWD_BRIDGE_CODE=y \
+	  CONFIG_DIAG_CHAR
+  DEPENDS:=+kmod-lib-crc-ccitt +USB_CONFIGFS_F_DIAG:kmod-usb-f-diag +USB_CONFIGFS_F_DIAG:kmod-usb-core
+  FILES:=$(LINUX_DIR)/drivers/char/diag/diagchar.ko
+ifneq (,$(findstring $(CONFIG_KERNEL_IPQ_MEM_PROFILE), 256)$(CONFIG_LOWMEM_FLASH))
+   AUTOLOAD:=
+else
+   AUTOLOAD:=$(call AutoLoad,52,diagchar)
+endif
+endef
+
+define KernelPackage/diag-char/description
+ CHAR DIAG
+endef
+
+$(eval $(call KernelPackage,diag-char))
+
+define KernelPackage/usb-f-qdss
+  TITLE:=USB QDSS
+  KCONFIG:=CONFIG_USB_F_QDSS \
+	CONFIG_USB_CONFIGFS_F_QDSS=y
+  DEPENDS:=@TARGET_ipq807x||TARGET_ipq60xx||TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_64||TARGET_ipq_ipq60xx||TARGET_ipq_ipq60xx_64||TARGET_ipq_ipq50xx||TARGET_ipq_ipq50xx_64 +kmod-usb-lib-composite +kmod-usb-configfs +kmod-lib-crc-ccitt +kmod-usb-dwc3 +TARGET_ipq_ipq60xx:kmod-usb-dwc3-qcom +TARGET_ipq_ipq60xx_64:kmod-usb-dwc3-qcom +TARGET_ipq_ipq50xx:kmod-usb-dwc3-qcom +TARGET_ipq_ipq50xx_64:kmod-usb-dwc3-qcom +TARGET_ipq_ipq807x:kmod-usb-dwc3-of-simple +TARGET_ipq_ipq807x_64:kmod-usb-dwc3-of-simple +TARGET_ipq60xx:kmod-usb-dwc3-qcom +TARGET_ipq60xx:kmod-usb-dwc3-of-simple +TARGET_ipq807x:kmod-usb-dwc3-qcom +TARGET_ipq807x:kmod-usb-dwc3-of-simple
+  FILES:=$(LINUX_DIR)/drivers/usb/gadget/function/usb_f_qdss.ko \
+	$(LINUX_DIR)/drivers/usb/gadget/function/u_qdss.ko
+  AUTOLOAD:=$(call AutoLoad,52,usb_f_qdss)
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-f-qdss/description
+ USB QDSS
+endef
+
+$(eval $(call KernelPackage,usb-f-qdss))
+
+define KernelPackage/usb-gdiag
+  TITLE:=USB GDIAG support
+  KCONFIG:=CONFIG_USB_G_DIAG
+  FILES:=\
+       $(LINUX_DIR)/drivers/usb/gadget/legacy/g_diag.ko
+  AUTOLOAD:=$(call AutoLoad,52,g_diag)
+  DEPENDS:=@TARGET_ipq807x||TARGET_ipq60xx||TARGET_ipq95xx||TARGET_ipq_ipq60xx||TARGET_ipq_ipq60xx_64||TARGET_ipq50xx||TARGET_ipq53xx +kmod-usb-gadget +kmod-usb-lib-composite
+  $(call AddPlatformDepends/usb)
+endef
+
+define KernelPackage/usb-gdiag/description
+ Kernel support for USB gdiag mode
+endef
+
+$(eval $(call KernelPackage,usb-gdiag))
+
+define KernelPackage/usb-phy-ipq5018
+  TITLE:=DWC3 USB PHY driver for IPQ5018
+  DEPENDS:=@TARGET_ipq50xx||TARGET_ipq53xx
+  KCONFIG:= \
+	CONFIG_USB_QCA_M31_PHY \
+	CONFIG_PHY_IPQ_UNIPHY_USB
+  FILES:= \
+	$(LINUX_DIR)/drivers/usb/phy/phy-qca-m31.ko \
+	$(LINUX_DIR)/drivers/phy/phy-qca-uniphy.ko@le4.4 \
+	$(LINUX_DIR)/drivers/phy/qualcomm/phy-qca-uniphy.ko@ge5.4
+  AUTOLOAD:=$(call AutoLoad,85,phy-qca-m31 phy-qca-uniphy)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phy-ipq5018/description
+ This driver provides support for the USB PHY drivers
+ within the IPQ5018 SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-phy-ipq5018))
+
 define KernelPackage/bootconfig
   SUBMENU:=Other modules
   TITLE:=Bootconfig partition for failsafe

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds

@@ -15,6 +15,9 @@ cig,wf188n)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_default "power" "POWER" "green:power" "on"
 	;;
+cig,wf660a)
+        ucidef_set_led_default "power" "POWER" "status:blue" "on"
+	;;
 edgecore,eap101)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
@@ -23,6 +26,12 @@ edgecore,eap101)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
 	;;
+emplus,wap386v2)
+	ucidef_set_led_default "power" "POWER" "red:power" "on"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
+	;;
 hfcl,ion4xi|\
 hfcl,ion4x|\
 hfcl,ion4x_2|\

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -34,10 +34,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-       cig,wf660a)
+	cig,wf660a|\
+	emplus,wap386v2)
 		ucidef_set_interface_wan "eth0"		
 		;;
-
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -76,6 +76,9 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ip link set eth0 address $wan_mac
 		;;
+	emplus,wap386v2)
+		wan_mac=$(cat /sys/class/net/eth0/address)
+		;;
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -76,6 +76,7 @@ case "$FIRMWARE" in
 	cig,wf188n|\
 	cig,wf660a|\
 	edgecore,eap101|\
+	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -109,7 +110,8 @@ ath11k-macs)
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
-	cig,wf188n)
+	cig,wf188n|\
+	emplus,wap386v2)
 		ath11k_generate_macs
 		;;
 	cig,wf660a)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -6,26 +6,27 @@ board=$(board_name)
 
 case "$board" in
     "edgecore,eap101")
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
-    "edgecore,eap102")
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+    "edgecore,eap102"|\
+    "edgecore,oap103")
+        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,oap101e-6e"|\
     "edgecore,oap101-6e")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy6g
         ;;
     "edgecore,oap101e"|\
     "edgecore,oap101")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ;;
     "edgecore,eap104")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ;;
 esac

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/init.d/bootcount

@@ -7,11 +7,12 @@ boot() {
 	hfcl,ion4xe|\
 	hfcl,ion4xi)
 		fw_setenv boot_count 0
-		;;		
+		;;
 	edgecore,eap101|\
 	edgecore,eap102|\
 	edgecore,oap102|\
-	edgecore.eap104)
+	edgecore,oap103|\
+	edgecore,eap104)
 		avail=$(fw_printenv -n upgrade_available)
 		[ ${avail} -eq 0 ] && fw_setenv upgrade_available 1
 		fw_setenv bootcount 0

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -122,6 +122,7 @@ platform_check_image() {
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
+	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -146,6 +147,13 @@ platform_do_upgrade() {
 		spi_nor_emmc_do_upgrade_bootconfig $1
 		;;
 	cig,wf188n|\
+	emplus,wap386v2)
+		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
+			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
+			CI_BOOTCFG=1
+		}
+		nand_upgrade_tar "$1"
+		;;
 	glinet,ax1800|\
 	glinet,axt1800|\
 	wallys,dr6018|\

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cp01-cig-wf660a.dtsi

@@ -11,7 +11,6 @@
 #include "ipq6018-cpr-regulator.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
 
 / {
     compatible = "cig,wf660a", "qcom,ipq6018-ap-cp01", "qcom,ipq6018";
@@ -29,6 +28,11 @@
 		ethernet2 = "/soc/dp3";
 		ethernet3 = "/soc/dp4";
 		ethernet4 = "/soc/dp5";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -155,6 +159,21 @@
 		drive-strength = <8>;
 		bias-pull-up;
 	};
+	
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		reset_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
 
 	mdio_pins: mdio_pinmux {
 		mux_0 {
@@ -181,20 +200,20 @@
 		};
 	};
 
-	pwm_pins: pwm_pinmux {
+	led_pins: led_pins {
 		mux_1 {
 			pins = "gpio22";
-			function = "pwm02";
+			function = "gpio";
 			drive-strength = <8>;
 		};
 		mux_2 {
 			pins = "gpio23";
-			function = "pwm12";
+			function = "gpio";
 			drive-strength = <8>;
 		};
 		mux_3 {
 			pins = "gpio24";
-			function = "pwm22";
+			function = "gpio";
 			drive-strength = <8>;
 		};
 	};
@@ -208,27 +227,6 @@
 		};
 	};
 
-	leds_pins: leds_pins {
-		led_5g {
-			pins = "gpio35";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_2g {
-			pins = "gpio37";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		led_usb0 {
-			pins = "gpio50";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
 	btcoex_pins: btcoex_pins {
 		mux_0 {
 			pins = "gpio51";
@@ -390,36 +388,38 @@
 		mdiobus = <&mdio>;
 	};
 
-	pwm {
-		pinctrl-0 = <&pwm_pins>;
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
 		pinctrl-names = "default";
-		used-pwm-indices = <1>, <1>, <1>, <0>;
-		dft-pwm-status = <0>, <1>, <0>, <0>;
-		status = "ok";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-0 = <&leds_pins>;
+		pinctrl-0 = <&led_pins>;
 		pinctrl-names = "default";
 
-		led@35 {
-			label = "led_5g";
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_5g";
-			default-state = "off";
+		led_power: led@22 {
+			label = "status:blue";
+			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 		};
-		led@37 {
-			label = "led_2g";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "led_2g";
-			default-state = "off";
+		
+		led@23 {
+			label = "status:green";
+			gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
 		};
-		led@50 {
-			label = "led_usb0";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usb-host";
-			default-state = "off";
+
+		led@24 {
+			label = "status:red";
+			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-emplus-wap386v2.dts

@@ -0,0 +1,356 @@
+/*
+ * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+#include "ipq6018-cpr-regulator.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Emplus WAP386 v2";
+	compatible = "emplus,wap386v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	gpio-reserved-ranges = <20 1>;
+
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <3>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <4>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x08>; /* lan port bitmap */
+		switch_wan_bmp = <0x10>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <2>;
+				phy_address = <3>;
+			};
+			port@1 {
+				port_id = <3>;
+				phy_address = <4>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@9 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power: led@28 {
+			label = "red:power";
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:red:power";
+			default-state = "on";
+		};
+		led@29 {
+			label = "blue:wan";
+			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:eth";
+			default-state = "on";
+		};
+		led@30 {
+			label = "blue:wifi2";
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:2g";
+			default-state = "on";
+		};
+		led@31 {
+			label = "blue:wifi5";
+			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:5g";
+			default-state = "on";
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x30>;
+};
+
+&pcie_phy {
+	status = "ok";
+};
+
+&pcie0 {
+#if defined(__CNSS2__)
+	status = "ok";
+#endif
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&qpic_nand {
+	status = "ok";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&CPU0 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU1 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU2 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU3 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&rpm_glink {
+	status = "disabled";
+};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -76,6 +76,15 @@ define Device/edgecore_eap101
 endef
 TARGET_DEVICES += edgecore_eap101
 
+define Device/emplus_wap386v2
+  DEVICE_TITLE := Emplus WAP386v2
+  DEVICE_DTS := qcom-ipq6018-emplus-wap386v2
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := emplus,wap386v2
+  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-env
+endef
+TARGET_DEVICES += emplus_wap386v2
+
 define Device/indio_um-310ax-v1
   DEVICE_TITLE := Indio UM-310AX V1
   DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1

feeds/ipq807x_v5.4/ipq60xx/patches/302-disable-sdhci-leds.patch

@@ -0,0 +1,11 @@
+--- a/drivers/mmc/host/sdhci.c
++++ b/drivers/mmc/host/sdhci.c
+@@ -367,7 +367,7 @@ static void __sdhci_led_deactivate(struc
+ 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
+ 
+-#if IS_REACHABLE(CONFIG_LEDS_CLASS)
++#if 0
+ static void sdhci_led_control(struct led_classdev *led,
+ 			      enum led_brightness brightness)
+ {

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -13,13 +13,15 @@ cig,wf194c4)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
 	;;
 edgecore,eap102|\
-edgecore,oap102)
+edgecore,oap102|\
+edgecore,oap103)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
 sonicfi,rap630w-311g|\
+sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -23,6 +23,8 @@ qcom_setup_interfaces()
 		;;
 	edgecore,eap102|\
 	edgecore,oap102|\
+	edgecore,oap103|\
+	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -49,6 +51,16 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	sonicfi,rap650c)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,6 +16,20 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
+ath11k_generate_macs_rap650c() {
+	mac=$(fw_printenv -n BaseMacAddress)
+	[ -z "$mac" ] && return;
+
+	touch /lib/firmware/ath11k-macs
+	eth=$(macaddr_canonicalize $mac)
+	mac1=$(macaddr_add $eth 3)
+	mac2=$(macaddr_add $eth 2)
+	mac3=$(macaddr_add $eth 4)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -56,12 +70,14 @@ case "$FIRMWARE" in
 	cig,wf196|\
 	edgecore,eap102 |\
 	edgecore,oap102 |\
+	edgecore,oap103 |\
 	edgecore,eap106 |\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
+	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -89,12 +105,16 @@ ath11k-macs)
 	case "$board" in
 	edgecore,eap102|\
 	edgecore,oap102|\
+	edgecore,oap103|\
 	edgecore,eap106)
 		ath11k_generate_macs
 		;;
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
+	sonicfi,rap650c)
+		ath11k_generate_macs_rap650c
+		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -6,26 +6,28 @@ board=$(board_name)
 
 case "$board" in
     "edgecore,eap101")
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
-    "edgecore,eap102")
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+    "edgecore,eap102"|\
+    "edgecore,oap103"|\
+    "sonicfi,rap650c")
+        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,oap101e-6e"|\
     "edgecore,oap101-6e")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy6g
         ;;
     "edgecore,oap101e"|\
     "edgecore,oap101")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_1/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ;;
     "edgecore,eap104")
-        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy0
-        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy1
+        ln -s /sys/kernel/debug/ath11k/ipq5018\ hw1.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
+        ln -s /sys/kernel/debug/ath11k/qcn6122_2/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ;;
 esac

feeds/ipq807x_v5.4/ipq807x/base-files/etc/init.d/bootcount

@@ -11,7 +11,8 @@ boot() {
 	edgecore,eap101|\
 	edgecore,eap102|\
 	edgecore,oap102|\
-	edgecore.eap104)
+	edgecore,oap103|\
+	edgecore,eap104)
 		avail=$(fw_printenv -n upgrade_available)
 		[ ${avail} -eq 0 ] && fw_setenv upgrade_available 1
 		fw_setenv bootcount 0

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -27,7 +27,9 @@ platform_check_image() {
 	cig,wf196|\
 	edgecore,eap102|\
 	edgecore,oap102|\
+	edgecore,oap103|\
 	edgecore,eap106|\
+	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -46,8 +48,14 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
+        cig,wf196)
+                [ -f /proc/boot_info/rootfs/upgradepartition ] && {
+                        CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
+                        CI_BOOTCFG=1
+                }
+                nand_upgrade_tar "$1"
+                ;;
 	cig,wf194c4|\
-	cig,wf196|\
 	tplink,ex447)
 		nand_upgrade_tar "$1"
 		;;
@@ -57,7 +65,8 @@ platform_do_upgrade() {
 		nand_upgrade_tar "$1"
 		;;
 	edgecore,eap102|\
-	edgecore,oap102)
+	edgecore,oap102|\
+	edgecore,oap103)
 		if [ "$(find_mtd_chardev rootfs)" ]; then
 			CI_UBIPART="rootfs"
 		else
@@ -75,5 +84,17 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
+	sonicfi,rap650c)
+		boot_part=$(fw_printenv -n bootfrom)
+		[ ${#boot_part} -eq 0 ] && boot_part=0
+		echo "Current bootfrom is $boot_part"
+		if [[ $boot_part == 1 ]]; then
+			CI_UBIPART="rootfs"
+			CI_FWSETENV="bootfrom 0"
+		elif [[ $boot_part == 0 ]]; then
+			CI_UBIPART="rootfs_1"
+			CI_FWSETENV="bootfrom 1"
+		fi
+		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-oap103.dts

@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Edgecore OAP103";
+	compatible = "edgecore,oap103", "qcom,ipq807x-ac02", "qcom,ipq807x";
+	qcom,msm-id = <0x178 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet1 = "/soc/dp5";
+		ethernet0 = "/soc/dp6";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		mcu-enable {
+			gpio-export,name = "mcu-enable";
+			gpio-export,output = <0>;
+			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-hub-enable {
+			gpio-export,name = "usb-hub-enable";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-rear-power {
+			gpio-export,name = "usb-rear-power";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-side-power {
+			gpio-export,name = "usb-side-power";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	soc {
+		pinctrl@1000000 {
+			pinctrl-0 = <&mcu_rst &mcu_rsv &usb_rear_pwr &usb_side_pwr &usb_hub_rst>;
+			pinctrl-names = "default";
+
+			mcu_rst: mcu_rst_pins {
+				pins = "gpio54";
+				function = "gpio";
+				drive-strength = <8>;
+				bias-disable;
+				output-low;
+			};
+
+			mcu_rsv: mcu_rsv_pins {
+				pins = "gpio56";
+				function = "gpio";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			usb_rear_pwr: usb_rear_pwr_pins {
+				pins = "gpio29";
+				function = "gpio";
+				drive-strength = <8>;
+				bias-disable;
+				output-high;
+			};
+
+			usb_side_pwr: usb_side_pwr_pins {
+				pins = "gpio30";
+				function = "gpio";
+				drive-strength = <8>;
+				bias-disable;
+				output-high;
+			};
+
+			usb_hub_rst: usb_hub_rst_pins {
+				pins = "gpio55";
+				function = "gpio";
+				drive-strength = <8>;
+				bias-disable;
+				output-high;
+			};
+
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio66";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio33";
+					function = "gpio";
+					bias-pull-up;
+				};
+				mux_3 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+			led_pins: led_pins {
+				led_2g {
+					pins = "gpio42";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				led_5g {
+					pins = "gpio43";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		usb3@8A00000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 66 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 1 &tlmm 44 1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <24>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <24>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		dp6 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		dp5 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <5>;
+			reg = <0x3a001a00 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <24>;
+			phy-mode = "sgmii";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&led_pins>;
+			pinctrl-names = "default";
+
+			led_pwr {
+				label = "green:wan";
+				gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+				linux,default-trigger = "led_pwr";
+			};
+
+			led_2g {
+				label = "green:wifi2";
+				gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_5g {
+				label = "green:wifi5";
+				gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_power: led_bt {
+				gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+				label = "green:power";
+				default-state = "on";
+				linux,default-trigger = "led_bt";
+			};
+		};
+		nss-macsec0 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			mdiobus = <&mdio>;
+		};
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&apc_cpr {
+	/* Same CPR configuration as OAK */
+	compatible = "qcom,cpr4-ipq817x-apss-regulator";
+
+	thread@0 {
+		apc_vreg: regulator {
+			regulator-min-microvolt = <1>;
+			regulator-max-microvolt = <2>;
+			qcom,cpr-fuse-corners = <2>;
+			qcom,cpr-corners = <3>;
+			qcom,cpr-speed-bin-corners = <3>;
+			qcom,cpr-corner-fmax-map = <1 3>;
+
+			qcom,cpr-voltage-ceiling =
+				<840000 904000 944000>;
+			qcom,cpr-voltage-floor =
+				<592000 648000 712000>;
+			qcom,corner-frequencies =
+				<1017600000 1382400000 1382400000>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				< 20000  26000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0   7000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-floor-to-ceiling-max-range =
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>;
+		};
+	};
+};
+
+&npu_cpr {
+	status = "disabled";
+};
+
+&nss0 {
+        qcom,low-frequency = <187200000>;
+        qcom,mid-frequency = <748800000>;
+        qcom,max-frequency = <1497600000>;
+};
+
+&nss0 {
+	npu-supply = <&dummy_reg>;
+	mx-supply = <&dummy_reg>;
+};
+
+&wifi0 {
+	qcom,board_id = <0x92>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x292>;
+};

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "SonicFi RAP650C";
+	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
+	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio57";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			usb_mux_sel_pins: usb_mux_pins {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			pcie0_pins: pcie_pins {
+				pcie0_rst {
+					pins = "gpio58";
+					function = "pcie0_rst";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				pcie0_wake {
+					pins = "gpio59";
+					function = "pcie0_wake";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio25";
+					function = "gpio";
+					bias-pull-up;
+				};
+				mux_3 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			led_pins: led_pins {
+				red {
+					pins = "gpio0";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				green {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				blue {
+					pins = "gpio9";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			spi_3_pins: spi_3_pins {
+				mux {
+					pins = "gpio50", "gpio52", "gpio53";
+					function = "blsp3_spi";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				spi_cs {
+					pins = "gpio22";
+					function = "blsp3_spi2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				quartz_interrupt {
+					pins = "gpio47";
+					function = "gpio";
+					input;
+					bias-disable;
+				};
+				quartz_reset {
+					pins = "gpio21";
+					function = "gpio";
+					output-low;
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <5>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <24>;
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001a00 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@78b8000 {
+			status = "ok";
+			pinctrl-0 = <&spi_3_pins>;
+			pinctrl-names = "default";
+			cs-select = <2>;
+			quartz-reset-gpio = <&tlmm 21 1>;
+
+			spidev3: spi@3 {
+				  compatible = "qti,spidev";
+				  reg = <0>;
+				  spi-max-frequency = <24000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		usb3@8A00000 {
+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
+		phy@84000 {
+			status = "ok";
+		};
+
+		phy@86000 {
+			status = "ok";
+		};
+
+		pci@20000000 {
+			perst-gpio = <&tlmm 58 1>;
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&led_pins>;
+			pinctrl-names = "default";
+
+			red {
+				label = "sys:red";
+				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			green {
+				label = "sys:green";
+				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_power: blue {
+				label = "sys:blue";
+				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <24>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <24>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		nss-macsec0 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x90>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -39,6 +39,15 @@ define Device/edgecore_oap102
 endef
 TARGET_DEVICES += edgecore_oap102
 
+define Device/edgecore_oap103
+  DEVICE_TITLE := Edgecore OAP103
+  DEVICE_DTS := qcom-ipq807x-oap103
+  DEVICE_DTS_CONFIG=config@ac02
+  SUPPORTED_DEVICES := edgecore,oap103
+  DEVICE_PACKAGES := ath11k-wifi-edgecore-oap103 kmod-usb2 kmod-usb3 uboot-envtools
+endef
+TARGET_DEVICES += edgecore_oap103
+
 define Device/edgecore_eap106
   DEVICE_TITLE := Edgecore EAP106
   DEVICE_DTS := qcom-ipq807x-eap106
@@ -48,6 +57,17 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
+define Device/sonicfi_rap650c
+  DEVICE_TITLE := SonicFi RAP650C
+  DEVICE_DTS := qcom-ipq807x-rap650c
+  DEVICE_DTS_CONFIG=config@hk09
+  SUPPORTED_DEVICES := sonicfi,rap650c
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap650c
+
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/ipq807x_v5.4/mac80211/patches/pending/330-add_peer.patch

@@ -1,38 +0,0 @@
---- a/drivers/net/wireless/ath/ath11k/peer.c
-+++ b/drivers/net/wireless/ath/ath11k/peer.c
-@@ -819,8 +819,13 @@ int ath11k_peer_delete(struct ath11k *ar
- 				}
- 			}
- #endif
--		ath11k_peer_rhash_delete(ar->ab, peer);
-+		if (peer->vdev_id == vdev_id)
-+			ath11k_peer_rhash_delete(ar->ab, peer);
- 	}
-+
-+	if (!peer)
-+		peer = ath11k_peer_find(ar->ab, vdev_id, addr);
-+
- 	spin_unlock_bh(&ar->ab->base_lock);
- 	mutex_unlock(&ar->ab->tbl_mtx_lock);
- #ifdef CPTCFG_ATH11K_NSS_SUPPORT
-@@ -870,8 +875,18 @@ int ath11k_peer_create(struct ath11k *ar
- 	spin_lock_bh(&ar->ab->base_lock);
- 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
- 	if (peer) {
--		spin_unlock_bh(&ar->ab->base_lock);
--		return -EINVAL;
-+		if (peer->vdev_id == param->vdev_id) {
-+			spin_unlock_bh(&ar->ab->base_lock);
-+			return -EINVAL;
-+		}
-+
-+		/* Assume sta is transitioning to another band.
-+		 * Remove here the peer from rhash.
-+		 */
-+		mutex_lock(&ar->ab->tbl_mtx_lock);
-+		ath11k_peer_rhash_delete(ar->ab, peer);
-+		mutex_unlock(&ar->ab->tbl_mtx_lock);
-+
- 	}
- 	spin_unlock_bh(&ar->ab->base_lock);
- 

feeds/ipq807x_v5.4/mac80211/patches/pending/999-remove-kernel-warn-msg-abnormal-he-nss-value.patch

@@ -6,7 +6,7 @@
  		return 0;
 -	if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8))
 +	if (rate->nss < 1 || rate->nss > 8) {
-+		printk_once(1, "invalid rate->nss: %d\n", rate->nss);
++		printk_once(KERN_WARNING "cfg80211_calculate_bitrate_he: invalid rate->nss: %d\n", rate->nss);
  		return 0;
 -
 +	}

feeds/ipq807x_v5.4/mac80211/patches/pending/a-001-fix-roaming-between-phys.patch

@@ -0,0 +1,116 @@
+Index: backports-20210222_001-5.4.164-b157d2276/drivers/net/wireless/ath/ath11k/peer.c
+===================================================================
+--- backports-20210222_001-5.4.164-b157d2276.orig/drivers/net/wireless/ath/ath11k/peer.c
++++ backports-20210222_001-5.4.164-b157d2276/drivers/net/wireless/ath/ath11k/peer.c
+@@ -789,8 +789,6 @@ int ath11k_peer_delete(struct ath11k *ar
+ #endif
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 
+-	reinit_completion(&ar->peer_delete_done);
+-
+ 	ath11k_nss_peer_delete(ar->ab, vdev_id, addr);
+ #ifdef CCPTCFG_ATH11K_NSS_SUPPORTPTCFG_ATH11K_NSS_SUPPORT
+ 	mutex_lock(&ar->ab->base_ast_lock);
+@@ -799,33 +797,60 @@ int ath11k_peer_delete(struct ath11k *ar
+ 	spin_lock_bh(&ar->ab->base_lock);
+ 
+ 	peer = ath11k_peer_find_by_addr(ar->ab, addr);
+-	if (peer) {
++	/* Check if the found peer is what we want to remove.
++	 * While the sta is transitioning to another band we may
++	 * have 2 peer with the same addr assigned to different
++	 * vdev_id. Make sure we are deleting the correct peer.
++	 */
++	if (peer && peer->vdev_id == vdev_id)
++		ath11k_peer_rhash_delete(ar->ab, peer);
++
++	/* Fallback to peer list search if the correct peer can't be found.
++	 * Skip the deletion of the peer from the rhash since it has already
++	 * been deleted in peer add.
++	 */
++	if (!peer)
++		peer = ath11k_peer_find(ar->ab, vdev_id, addr);
++
++
++	if (!peer) {
++		spin_unlock_bh(&ar->ab->base_lock);
++		mutex_unlock(&ar->ab->tbl_mtx_lock);
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+-		peer->delete_in_progress = true;
+-		if (peer->self_ast_entry) {
+-			ath11k_peer_del_ast(ar, peer->self_ast_entry);
+-			peer->self_ast_entry = NULL;
+-		}
++		mutex_unlock(&ar->ab->base_ast_lock);
++#endif
++		ath11k_warn(ar->ab,
++			    "failed to find peer vdev_id %d addr %pM in delete\n",
++			    vdev_id, addr);
++		return -EINVAL;
++        }
++
++#ifdef CPTCFG_ATH11K_NSS_SUPPORT
++	peer->delete_in_progress = true;
++	if (peer->self_ast_entry) {
++		ath11k_peer_del_ast(ar, peer->self_ast_entry);
++		peer->self_ast_entry = NULL;
++	}
+ 
+-		list_for_each_entry_safe(ast_entry, tmp_ast,
+-					 &peer->ast_entry_list, ase_list)
+-			if ((ast_entry->type == ATH11K_AST_TYPE_WDS) ||
+-			    (ast_entry->type == ATH11K_AST_TYPE_MEC)) {
+-				if (!list_empty(&ast_entry->wmi_list)) {
+-					ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+-						   "%s deleting unprocessed ast entry %pM of peer %pM from wmi list\n",
+-						    __func__, ast_entry->addr, addr);
+-					list_del_init(&ast_entry->wmi_list);
+-				}
++	list_for_each_entry_safe(ast_entry, tmp_ast,
++				 &peer->ast_entry_list, ase_list)
++		if ((ast_entry->type == ATH11K_AST_TYPE_WDS) ||
++		    (ast_entry->type == ATH11K_AST_TYPE_MEC)) {
++			if (!list_empty(&ast_entry->wmi_list)) {
++				ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
++					   "%s deleting unprocessed ast entry %pM of peer %pM from wmi list\n",
++					    __func__, ast_entry->addr, addr);
++				list_del_init(&ast_entry->wmi_list);
+ 			}
++		}
+ #endif
+-		ath11k_peer_rhash_delete(ar->ab, peer);
+-	}
+ 	spin_unlock_bh(&ar->ab->base_lock);
+ 	mutex_unlock(&ar->ab->tbl_mtx_lock);
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+ 	mutex_unlock(&ar->ab->base_ast_lock);
+ #endif
++	reinit_completion(&ar->peer_delete_done);
++
+ 	ret = ath11k_wmi_send_peer_delete_cmd(ar, addr, vdev_id);
+ 	if (ret) {
+ 		ath11k_warn(ar->ab,
+@@ -866,14 +891,20 @@ int ath11k_peer_create(struct ath11k *ar
+ 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
+ 		return -ENOBUFS;
+ 	}
+-
++	mutex_lock(&ar->ab->tbl_mtx_lock);
+ 	spin_lock_bh(&ar->ab->base_lock);
+ 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
+ 	if (peer) {
+-		spin_unlock_bh(&ar->ab->base_lock);
+-		return -EINVAL;
++		if (peer->vdev_id == param->vdev_id) {
++			spin_unlock_bh(&ar->ab->base_lock);
++			mutex_unlock(&ar->ab->tbl_mtx_lock);
++			return -EINVAL;
++		}
++		ath11k_peer_rhash_delete(ar->ab, peer);
+ 	}
++
+ 	spin_unlock_bh(&ar->ab->base_lock);
++	mutex_unlock(&ar->ab->tbl_mtx_lock);
+ 
+ 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
+ 	if (ret) {

feeds/ipq807x_v5.4/mac80211/patches/pending/a-002-mac80211-workaround-Send-multicast-frames-as-multipl.patch

@@ -0,0 +1,36 @@
+From 93d02017c444d9bcb5e319ba6d9dac5794529cdd Mon Sep 17 00:00:00 2001
+From: Venkat Chimata <venkata@shasta.cloud>
+Date: Fri, 19 Jul 2024 18:43:19 +0530
+Subject: [PATCH] mac80211: workaround: Send multicast frames as multiple
+ unicast frames in DVLAN mode
+
+Broadcast / Multciast transmission is not working in DVLAN mode in the driver.
+If we send the frames as unicast frames, it works. This is a workaround for now.
+Need to rollback once we add a clean fix.
+
+Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
+---
+ net/mac80211/tx.c | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
+index 9e978f9..6ebf9c2 100644
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -4197,11 +4197,8 @@ static bool ieee80211_multicast_to_unicast(struct sk_buff *skb,
+ 
+ 	switch (sdata->vif.type) {
+ 	case NL80211_IFTYPE_AP_VLAN:
+-		if (sdata->u.vlan.sta)
+-			return false;
+-		if (sdata->wdev.use_4addr)
+-			return false;
+-		fallthrough;
++		// For now always enable multicast_to_unicast in DVLAN
++		return true;
+ 	case NL80211_IFTYPE_AP:
+ 		/* check runtime toggle for this bss */
+ 		if (!sdata->bss->multicast_to_unicast)
+-- 
+2.34.1
+

feeds/ipq807x_v5.4/mac80211/patches/pending/a-003-fix-roaming-firmware-crash.patch

@@ -0,0 +1,119 @@
+--- a/drivers/net/wireless/ath/ath11k/peer.c
++++ b/drivers/net/wireless/ath/ath11k/peer.c
+@@ -819,10 +819,7 @@ int ath11k_peer_delete(struct ath11k *ar
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+ 		mutex_unlock(&ar->ab->base_ast_lock);
+ #endif
+-		ath11k_warn(ar->ab,
+-			    "failed to find peer vdev_id %d addr %pM in delete\n",
+-			    vdev_id, addr);
+-		return -EINVAL;
++		return 0;
+         }
+ 
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+@@ -883,6 +880,7 @@ int ath11k_peer_create(struct ath11k *ar
+ 	struct ieee80211_vif *vif = arvif->vif;
+ 	struct ath11k_sta *arsta;
+ 	int ret, fbret;
++	u8 vdev_id = 0;
+ 
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 
+@@ -891,20 +889,21 @@ int ath11k_peer_create(struct ath11k *ar
+ 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
+ 		return -ENOBUFS;
+ 	}
++
+ 	mutex_lock(&ar->ab->tbl_mtx_lock);
+ 	spin_lock_bh(&ar->ab->base_lock);
+ 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
++	if (peer)
++		vdev_id = peer->vdev_id;
++	spin_unlock_bh(&ar->ab->base_lock);
++	mutex_unlock(&ar->ab->tbl_mtx_lock);
++
+ 	if (peer) {
+-		if (peer->vdev_id == param->vdev_id) {
+-			spin_unlock_bh(&ar->ab->base_lock);
+-			mutex_unlock(&ar->ab->tbl_mtx_lock);
++		if (vdev_id == param->vdev_id)
+ 			return -EINVAL;
+-		}
+-		ath11k_peer_rhash_delete(ar->ab, peer);
+-	}
+ 
+-	spin_unlock_bh(&ar->ab->base_lock);
+-	mutex_unlock(&ar->ab->tbl_mtx_lock);
++		ath11k_peer_delete(ar, vdev_id, param->peer_addr);
++	}
+ 
+ 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
+ 	if (ret) {
+--- a/drivers/net/wireless/ath/ath11k/dp.c
++++ b/drivers/net/wireless/ath/ath11k/dp.c
+@@ -28,7 +28,7 @@ void ath11k_dp_peer_cleanup(struct ath11
+ 	spin_lock_bh(&ab->base_lock);
+ 	peer = ath11k_peer_find(ab, vdev_id, addr);
+ 	if (!peer) {
+-		ath11k_warn(ab, "failed to lookup peer %pM on vdev %d\n",
++		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to lookup peer %pM on vdev %d\n",
+ 			    addr, vdev_id);
+ 		spin_unlock_bh(&ab->base_lock);
+ 		return;
+--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
++++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
+@@ -1204,9 +1204,9 @@ int ath11k_dp_rx_ampdu_stop(struct ath11
+ 
+ 	peer = ath11k_peer_find(ab, vdev_id, params->sta->addr);
+ 	if (!peer) {
+-		ath11k_warn(ab, "failed to find the peer to stop rx aggregation\n");
++		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to find the peer to stop rx aggregation\n");
+ 		spin_unlock_bh(&ab->base_lock);
+-		return -ENOENT;
++		return 0;
+ 	}
+ 
+ 	paddr = peer->rx_tid[params->tid].paddr;
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -4075,7 +4075,7 @@ static int ath11k_clear_peer_keys(struct
+ 	peer = ath11k_peer_find(ab, arvif->vdev_id, addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ab->base_lock);
+-		return -ENOENT;
++		return 0;
+ 	}
+ 	for (i = 0; i < ARRAY_SIZE(keys); i++) {
+ 		keys[i]= peer->keys[i];
+@@ -4325,6 +4325,10 @@ static int ath11k_mac_op_set_key(struct
+ 
+ 	spin_lock_bh(&ab->base_lock);
+ 	peer = ath11k_peer_find(ab, arvif->vdev_id, peer_addr);
++	if (!peer && cmd == DISABLE_KEY) {
++		ret = 0;
++		goto unlock;
++	}
+ 
+ 	/* TODO: Check if vdev specific security cfg is mandatory */
+ 	ret = ath11k_nss_vdev_set_cmd(arvif, ATH11K_NSS_WIFI_VDEV_SECURITY_TYPE_CMD, key->cipher);
+@@ -5961,7 +5965,7 @@ static void ath11k_mac_op_sta_rc_update(
+ 	peer = ath11k_peer_find(ar->ab, arvif->vdev_id, sta->addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ar->ab->base_lock);
+-		ath11k_warn(ar->ab, "mac sta rc update failed to find peer %pM on vdev %i\n",
++		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac sta rc update failed to find peer %pM on vdev %i\n",
+ 			    sta->addr, arvif->vdev_id);
+ 		return;
+ 	}
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -8425,7 +8425,7 @@ static void ath11k_peer_sta_kickout_even
+ 	peer = ath11k_peer_find_by_addr(ab, arg.mac_addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ab->base_lock);
+-		ath11k_warn(ab, "peer not found %pM\n",
++		ath11k_dbg(ab, ATH11K_DBG_WMI, "peer not found %pM\n",
+ 			    arg.mac_addr);
+ 		goto exit;
+ 	}

feeds/ipq807x_v5.4/mac80211/patches/pending/a-100-fix-ap-vlan-he-capab.patch

@@ -0,0 +1,12 @@
+--- a/include/net/cfg80211.h
++++ b/include/net/cfg80211.h
+@@ -543,6 +543,9 @@ ieee80211_get_sband_iftype_data(const st
+ 	if (WARN_ON(iftype >= NL80211_IFTYPE_MAX))
+ 		return NULL;
+ 
++	if (iftype == NL80211_IFTYPE_AP_VLAN)
++		iftype = NL80211_IFTYPE_AP;
++
+ 	for (i = 0; i < sband->n_iftype_data; i++)  {
+ 		const struct ieee80211_sband_iftype_data *data =
+ 			&sband->iftype_data[i];

feeds/ipq95xx/ath11k-firmware/Makefile

@@ -1,37 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ath11k-firmware
-PKG_SOURCE_PROTO:=git
-PKG_BRANCH:=main
-PKG_SOURCE_URL:=https://github.com/quic/upstream-wifi-fw.git
-PKG_MIRROR_HASH:=557505744764b0442c887be3f5bb0ce924323d785b6d207899f19fad992a6020
-PKG_SOURCE_VERSION:=3417bb86645c5ff4c58258db7cc33e43260b4222
-
-PKG_MAINTAINER:=John Crispin <john@phrozen.org>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ath11k-firmware-default
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  DEPENDS:=
-endef
-
-define Package/ath11k-firmware-ipq95xx
-  $(Package/ath11k-firmware-default)
-  TITLE:=ath11k firmware for IPQ95xx devices
-  DEPENDS:=@TARGET_ipq95xx
-endef
-
-define Build/Compile
-
-endef
-
-define Package/ath11k-firmware-ipq95xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/IPQ9574/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/ath11k-firmware/IPQ9574/hw1.0/2.9.0.1/WLAN.HK.2.9.0.1-01890-QCAHKSWPL_SILICONZ-1/* \
-		$(1)/lib/firmware/IPQ9574/
-endef
-
-$(eval $(call BuildPackage,ath11k-firmware-ipq95xx))

feeds/ipq95xx/ath11k-wifi/Makefile

@@ -1,36 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/version.mk
-
-PKG_NAME:=ath11k-wifi
-PKG_RELEASE:=1
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-
-endef
-
-define Package/ath11k-wifi-default
-  SUBMENU:=ath11k Board-Specific Overrides
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  DEPENDS:=@TARGET_ipq95xx
-  TITLE:=Custom Board
-endef
-
-define Package/ath11k-wifi-qcom-ipq95xx
-$(call Package/ath11k-wifi-default)
-    TITLE:=board-2.bin for QCOM IPQ9574 eval kits
-endef
-
-define Package/ath11k-wifi-qcom-ipq95xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/IPQ9574/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.IPQ9574 $(1)/lib/firmware/ath11k/IPQ9574/hw1.0/board-2.bin
-endef
-
-$(eval $(call BuildPackage,ath11k-wifi-qcom-ipq95xx))

feeds/ipq95xx/ath12k-firmware/Makefile

@@ -1,76 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ath12k-firmware
-PKG_MIRROR_HASH:=a325f86b1d613f713d2e015abca4a9ff86c8448d4cd540fa022866da2c5aa042
-PKG_SOURCE_PROTO:=git
-PKG_BRANCH:=main
-PKG_SOURCE_URL:=https://github.com/quic/upstream-wifi-fw.git
-PKG_SOURCE_VERSION:=e90d32aaa149800ea79760639cb5ac9ddcfc8281
-
-PKG_MAINTAINER:=John Crispin <john@phrozen.org>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ath12k-firmware-default
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  DEPENDS:=
-endef
-
-define Package/ath12k-firmware-qcn92xx-split-phy
-  $(Package/ath12k-firmware-default)
-  TITLE:=ath12k firmware for qcn92xx split phy devices
-  DEPENDS:=@(TARGET_ipq95xx||TARGET_ipq53xx)
-endef
-
-define Package/ath12k-firmware-qcn92xx
-  $(Package/ath12k-firmware-default)
-  TITLE:=ath12k firmware for qcn92xx devices
-  DEPENDS:=@(TARGET_ipq95xx||TARGET_ipq53xx)
-endef
-
-define Package/ath12k-firmware-ipq53xx
-  $(Package/ath12k-firmware-default)
-  TITLE:=ath12k firmware for ipq53xx devices
-  DEPENDS:=@TARGET_ipq53xx
-endef
-
-define Package/ath12k-firmware-ipq53xx-wk-wk
-  $(Package/ath12k-firmware-default)
-  TITLE:=ath12k firmware for ipq53xx + wk + wk devices
-  DEPENDS:=@TARGET_ipq53xx
-endef
-
-define Build/Compile
-
-endef
-
-define Package/ath12k-firmware-qcn92xx-split-phy/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0
-	$(CP) $(PKG_BUILD_DIR)/ath12k-firmware/QCN9274/hw2.0_split_phy/1.2.1/WLAN.WBE.1.2.1-00148-QCAHKSWPL_SILICONZ-1/* \
-		$(1)/lib/firmware/ath12k/QCN92XX/hw1.0
-endef
-
-define Package/ath12k-firmware-qcn92xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0
-	$(CP) $(PKG_BUILD_DIR)/ath12k-firmware/QCN9274/hw2.0/1.2.1/WLAN.WBE.1.2.1-00201-QCAHKSWPL_SILICONZ-1/* \
-		$(1)/lib/firmware/ath12k/QCN92XX/hw1.0
-endef
-
-define Package/ath12k-firmware-ipq53xx/install
-	$(INSTALL_DIR) $(1)/lib/firmware/IPQ5332/
-	$(CP) $(PKG_BUILD_DIR)/ath12k-firmware//IPQ5322/hw1.0/1.2.1/WLAN.WBE.1.2.1-00201-QCAHKSWPL_SILICONZ-1/* \
-		$(1)/lib/firmware/IPQ5332/
-endef
-
-define Package/ath12k-firmware-ipq53xx-wk-wk/install
-	$(INSTALL_DIR) $(1)/lib/firmware/IPQ5332/
-	$(CP) $(PKG_BUILD_DIR)/ath12k-firmware/IPQ5322_QCN6432_QCN6432/hw1.0/testing/1.3/WLAN.WBE.1.3-02907-QCAHKSWPL_SILICONZ-1/* \
-		$(1)/lib/firmware/IPQ5332/
-endef
-
-$(eval $(call BuildPackage,ath12k-firmware-qcn92xx))
-$(eval $(call BuildPackage,ath12k-firmware-qcn92xx-split-phy))
-$(eval $(call BuildPackage,ath12k-firmware-ipq53xx))
-$(eval $(call BuildPackage,ath12k-firmware-ipq53xx-wk-wk))

feeds/ipq95xx/ath12k-wifi/Makefile

@@ -1,78 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/version.mk
-
-PKG_NAME:=ath12k-wifi
-PKG_RELEASE:=1
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-
-endef
-
-define Package/ath12k-wifi-default
-  SUBMENU:=ath12k Board-Specific Overrides
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  DEPENDS:=@(TARGET_qcn9274||TARGET_ipq53xx)
-  TITLE:=Custom Board
-endef
-
-define Package/ath12k-wifi-qcom-qcn9274
-$(call Package/ath12k-wifi-default)
-    TITLE:=board-2.bin for QCOM QCN9274 eval kits
-endef
-
-define Package/ath12k-wifi-qcom-qcn9274/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN9274/hw1.0/
-	$(INSTALL_DATA) ./board-2.bin.QCN9274 $(1)/lib/firmware/ath12k/QCN9274/hw1.0/board-2.bin
-endef
-
-define Package/ath12k-wifi-cig-wf189
-$(call Package/ath12k-wifi-default)
-    TITLE:=board.bin for CIG WF189
-endef
-
-define Package/ath12k-wifi-edgecore-eap105
-$(call Package/ath12k-wifi-default)
-    TITLE:=board.bin for Edgecore EAP105
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip
-$(call Package/ath12k-wifi-default)
-    TITLE:=board.bin for Sercomm WIFI-7
-endef
-
-define Package/ath12k-wifi-cig-wf189/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0
-	$(INSTALL_DATA) ./regdb.bin $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DATA) ./board-cig-wf189.bin.qcn9224 $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board.bin
-	$(INSTALL_DATA) ./regdb.bin $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-cig-wf189.bin.ipq53xx $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board.bin
-endef
-
-define Package/ath12k-wifi-edgecore-eap105/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0
-	$(INSTALL_DATA) ./regdb.bin $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DATA) ./board-edgecore-eap105.bin.qcn9224 $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board.bin
-	$(INSTALL_DATA) ./regdb.bin $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-edgecore-eap105.bin.ipq53xx $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board.bin
-endef
-
-define Package/ath12k-wifi-sercomm-ap72tip/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath12k/QCN92XX/hw1.0 $(1)/lib/firmware/ath12k/IPQ5332/hw1.0
-	$(INSTALL_DATA) ./regdb.bin $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/
-	$(INSTALL_DATA) ./board-sercomm-ap72tip.bin.qcn9224 $(1)/lib/firmware/ath12k/QCN92XX/hw1.0/board.bin
-	$(INSTALL_DATA) ./regdb.bin $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/
-	$(INSTALL_DATA) ./board-sercomm-ap72tip.bin.ipq53xx $(1)/lib/firmware/ath12k/IPQ5332/hw1.0/board.bin
-endef
-
-$(eval $(call BuildPackage,ath12k-wifi-qcom-qcn9274))
-$(eval $(call BuildPackage,ath12k-wifi-cig-wf189))
-$(eval $(call BuildPackage,ath12k-wifi-edgecore-eap105))
-$(eval $(call BuildPackage,ath12k-wifi-sercomm-ap72tip))

feeds/ipq95xx/batman-adv/Config.in

@@ -1,88 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Copyright (C) 2007-2019  B.A.T.M.A.N. contributors:
-#
-# Marek Lindner, Simon Wunderlich
-
-#
-# B.A.T.M.A.N meshing protocol
-#
-
-config BATMAN_ADV_BATMAN_V
-	bool "B.A.T.M.A.N. V protocol"
-	depends on PACKAGE_kmod-batman-adv
-	default y
-	help
-	  This option enables the B.A.T.M.A.N. V protocol, the successor
-	  of the currently used B.A.T.M.A.N. IV protocol. The main
-	  changes include splitting of the OGM protocol into a neighbor
-	  discovery protocol (Echo Location Protocol, ELP) and a new OGM
-	  Protocol OGMv2 for flooding protocol information through the
-	  network, as well as a throughput based metric.
-	  B.A.T.M.A.N. V is currently considered experimental and not
-	  compatible to B.A.T.M.A.N. IV networks.
-
-config BATMAN_ADV_BLA
-	bool "Bridge Loop Avoidance"
-	depends on PACKAGE_kmod-batman-adv
-	select PACKAGE_kmod-lib-crc16
-	default y
-	help
-	  This option enables BLA (Bridge Loop Avoidance), a mechanism
-	  to avoid Ethernet frames looping when mesh nodes are connected
-	  to both the same LAN and the same mesh. If you will never use
-	  more than one mesh node in the same LAN, you can safely remove
-	  this feature and save some space.
-
-config BATMAN_ADV_DAT
-	bool "Distributed ARP Table"
-	depends on PACKAGE_kmod-batman-adv
-	default y
-	help
-	  This option enables DAT (Distributed ARP Table), a DHT based
-	  mechanism that increases ARP reliability on sparse wireless
-	  mesh networks. If you think that your network does not need
-	  this option you can safely remove it and save some space.
-
-config BATMAN_ADV_NC
-	bool "Network Coding"
-	depends on PACKAGE_kmod-batman-adv
-	help
-	  This option enables network coding, a mechanism that aims to
-	  increase the overall network throughput by fusing multiple
-	  packets in one transmission.
-	  Note that interfaces controlled by batman-adv must be manually
-	  configured to have promiscuous mode enabled in order to make
-	  network coding work.
-	  If you think that your network does not need this feature you
-	  can safely disable it and save some space.
-
-config BATMAN_ADV_MCAST
-	bool "Multicast optimisation"
-	depends on PACKAGE_kmod-batman-adv
-	default y
-	help
-	  This option enables the multicast optimisation which aims to
-	  reduce the air overhead while improving the reliability of
-	  multicast messages.
-
-config BATMAN_ADV_DEBUG
-	bool "B.A.T.M.A.N. debugging"
-	depends on PACKAGE_kmod-batman-adv
-	help
-	  This is an option for use by developers; most people should
-	  say N here. This enables compilation of support for
-	  outputting debugging information to the debugfs log or tracing
-	  buffer. The output is controlled via the batadv netdev specific
-	  log_level setting.
-
-config BATMAN_ADV_TRACING
-	bool "B.A.T.M.A.N. tracing support"
-	depends on PACKAGE_kmod-batman-adv
-	select KERNEL_FTRACE
-	select KERNEL_ENABLE_DEFAULT_TRACERS
-	help
-	  This is an option for use by developers; most people should
-	  say N here. Select this option to gather traces like the debug
-	  messages using the generic tracing infrastructure of the kernel.
-	  BATMAN_ADV_DEBUG must also be selected to get trace events for
-	  batadv_dbg.

feeds/ipq95xx/batman-adv/Makefile

@@ -1,101 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=batman-adv
-PKG_VERSION:=2022.0
-PKG_RELEASE:=$(AUTORELEASE)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://downloads.open-mesh.org/batman/releases/batman-adv-$(PKG_VERSION)
-PKG_HASH:=49338705bc207709ac84d766688e702571009c827c0a320788ea51fb887714aa
-PKG_EXTMOD_SUBDIRS:=net/batman-adv
-
-PKG_MAINTAINER:=Simon Wunderlich <sw@simonwunderlich.de>
-PKG_LICENSE:=GPL-2.0-only MIT
-PKG_LICENSE_FILES:=LICENSES/preferred/GPL-2.0 LICENSES/preferred/MIT
-
-PKG_BUILD_PARALLEL:=1
-
-STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
-
-PKG_CONFIG_DEPENDS += \
-	CONFIG_BATMAN_ADV_BATMAN_V \
-	CONFIG_BATMAN_ADV_BLA \
-	CONFIG_BATMAN_ADV_DAT \
-	CONFIG_BATMAN_ADV_NC \
-	CONFIG_BATMAN_ADV_MCAST \
-	CONFIG_BATMAN_ADV_DEBUG \
-	CONFIG_BATMAN_ADV_TRACING
-
-include $(INCLUDE_DIR)/kernel.mk
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/batman-adv
-  SUBMENU:=Network Support
-  TITLE:=B.A.T.M.A.N. Adv
-  URL:=https://www.open-mesh.org/
-  DEPENDS:=+BATMAN_ADV_BLA:kmod-lib-crc16 +kmod-lib-crc32c +kmod-cfg80211 +batctl
-  FILES:=$(PKG_BUILD_DIR)/net/batman-adv/batman-adv.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoProbe,batman-adv)
-endef
-
-define KernelPackage/batman-adv/description
-  B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
-  a routing protocol for multi-hop ad-hoc mesh networks. The
-  networks may be wired or wireless. See
-  https://www.open-mesh.org/ for more information and user space
-  tools. This package builds version $(PKG_VERSION) of the kernel
-  module.
-endef
-
-define KernelPackage/batman-adv/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/kmod-batman-adv/conffiles
-/etc/config/batman-adv
-endef
-
-PKG_EXTRA_KCONFIG:= \
-	CONFIG_BATMAN_ADV=m \
-	CONFIG_BATMAN_ADV_DEBUG=$(if $(CONFIG_BATMAN_ADV_DEBUG),y,n) \
-	CONFIG_BATMAN_ADV_BLA=$(if $(CONFIG_BATMAN_ADV_BLA),y,n) \
-	CONFIG_BATMAN_ADV_DAT=$(if $(CONFIG_BATMAN_ADV_DAT),y,n) \
-	CONFIG_BATMAN_ADV_MCAST=$(if $(CONFIG_BATMAN_ADV_MCAST),y,n) \
-	CONFIG_BATMAN_ADV_NC=$(if $(CONFIG_BATMAN_ADV_NC),y,n) \
-	CONFIG_BATMAN_ADV_BATMAN_V=$(if $(CONFIG_BATMAN_ADV_BATMAN_V),y,n) \
-	CONFIG_BATMAN_ADV_TRACING=$(if $(CONFIG_BATMAN_ADV_TRACING),y,n) \
-
-PKG_EXTRA_CFLAGS:= \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(PKG_EXTRA_KCONFIG)))) \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(PKG_EXTRA_KCONFIG)))) \
-
-NOSTDINC_FLAGS = \
-	$(KERNEL_NOSTDINC_FLAGS) \
-	-I$(PKG_BUILD_DIR)/net/batman-adv \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport \
-	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
-	-I$(STAGING_DIR)/usr/include/mac80211 \
-	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
-	-I$(PKG_BUILD_DIR)/include/ \
-	-include backport/autoconf.h \
-	-include backport/backport.h \
-	-include $(PKG_BUILD_DIR)/compat-hacks.h \
-	-DBATADV_SOURCE_VERSION=\\\"$(PKG_VERSION)-openwrt-$(PKG_RELEASE)\\\"
-
-define Build/Compile
-	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) \
-		M="$(PKG_BUILD_DIR)/net/batman-adv" \
-		$(PKG_EXTRA_KCONFIG) \
-		EXTRA_CFLAGS="$(PKG_EXTRA_CFLAGS)" \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		modules
-endef
-
-define KernelPackage/batman-adv/install
-	$(CP) ./files/. $(1)/
-endef
-
-$(eval $(call KernelPackage,batman-adv))

feeds/ipq95xx/batman-adv/files/etc/uci-defaults/99-migrate-batadv_hardif

@@ -1,97 +0,0 @@
-#!/bin/sh
-
-# This UCI-Defaults script will split the batadv proto network interfaces
-# in batadv_hardif and batadv proto. The configuration options from
-# /etc/config/batman-adv will be moved to the latter.
-
-. /lib/functions.sh
-
-proto_batadv_to_batadv_hardif() {
-    local section="$1"
-    local proto
-    local mesh
-    local routing_algo
-
-    config_get proto "${section}" proto
-    config_get mesh "${section}" mesh
-    config_get routing_algo "${section}" routing_algo
-
-    if [ -z "$mesh" -o "${proto}" != "batadv" ]; then
-        continue
-    fi
-
-    uci set network."${section}".proto="batadv_hardif"
-    uci rename network."${section}".mesh="master"
-    uci delete network."${section}".routing_algo
-
-    # create new section or adjust existing one
-    uci set network."${mesh}"=interface
-    uci set network."${mesh}".proto=batadv
-    [ -n "${routing_algo}" ]  && uci set network."${mesh}".routing_algo="${routing_algo}"
-}
-
-mv_batadv_config_section() {
-    local section="$1"
-    local aggregated_ogms
-    local ap_isolation
-    local bonding
-    local bridge_loop_avoidance
-    local distributed_arp_table
-    local fragmentation
-    local gw_bandwidth
-    local gw_mode
-    local gw_sel_class
-    local hop_penalty
-    local isolation_mark
-    local log_level
-    local multicast_mode
-    local network_coding
-    local orig_interval
-
-    config_get aggregated_ogms "${section}" aggregated_ogms
-    config_get ap_isolation "${section}" ap_isolation
-    config_get bonding "${section}" bonding
-    config_get bridge_loop_avoidance "${section}" bridge_loop_avoidance
-    config_get distributed_arp_table "${section}" distributed_arp_table
-    config_get fragmentation "${section}" fragmentation
-    config_get gw_bandwidth "${section}" gw_bandwidth
-    config_get gw_mode "${section}" gw_mode
-    config_get gw_sel_class "${section}" gw_sel_class
-    config_get hop_penalty "${section}" hop_penalty
-    config_get isolation_mark "${section}" isolation_mark
-    config_get log_level "${section}" log_level
-    config_get multicast_mode "${section}" multicast_mode
-    config_get network_coding "${section}" network_coding
-    config_get orig_interval "${section}" orig_interval
-
-    # update section in case it exists
-    [ -n "${aggregated_ogms}" ]  && uci set network."${section}".aggregated_ogms="${aggregated_ogms}"
-    [ -n "${ap_isolation}" ]  && uci set network."${section}".ap_isolation="${ap_isolation}"
-    [ -n "${bonding}" ]  && uci set network."${section}".bonding="${bonding}"
-    [ -n "${bridge_loop_avoidance}" ]  && uci set network."${section}".bridge_loop_avoidance="${bridge_loop_avoidance}"
-    [ -n "${distributed_arp_table}" ]  && uci set network."${section}".distributed_arp_table="${distributed_arp_table}"
-    [ -n "${fragmentation}" ]  && uci set network."${section}".fragmentation="${fragmentation}"
-    [ -n "${gw_bandwidth}" ]  && uci set network."${section}".gw_bandwidth="${gw_bandwidth}"
-    [ -n "${gw_mode}" ]  && uci set network."${section}".gw_mode="${gw_mode}"
-    [ -n "${gw_sel_class}" ]  && uci set network."${section}".gw_sel_class="${gw_sel_class}"
-    [ -n "${hop_penalty}" ]  && uci set network."${section}".hop_penalty="${hop_penalty}"
-    [ -n "${isolation_mark}" ]  && uci set network."${section}".isolation_mark="${isolation_mark}"
-    [ -n "${log_level}" ]  && uci set network."${section}".log_level="${log_level}"
-    [ -n "${multicast_mode}" ]  && uci set network."${section}".multicast_mode="${multicast_mode}"
-    [ -n "${network_coding}" ]  && uci set network."${section}".network_coding="${network_coding}"
-    [ -n "${orig_interval}" ]  && uci set network."${section}".orig_interval="${orig_interval}"
-}
-
-if [ -f /etc/config/batman-adv ]; then
-    config_load network
-    config_foreach proto_batadv_to_batadv_hardif 'interface'
-    uci commit network
-
-    config_load batman-adv
-    config_foreach mv_batadv_config_section 'mesh'
-    uci commit network
-
-    rm -f /etc/config/batman-adv
-fi
-
-exit 0

feeds/ipq95xx/batman-adv/files/lib/netifd/proto/batadv.sh

@@ -1,123 +0,0 @@
-#!/bin/sh
-
-[ -n "$INCLUDE_ONLY" ] || {
-	. /lib/functions.sh
-	. ../netifd-proto.sh
-	init_proto "$@"
-}
-
-proto_batadv_init_config() {
-	no_device=1
-	available=1
-
-	proto_config_add_boolean 'aggregated_ogms:bool'
-	proto_config_add_boolean 'ap_isolation:bool'
-	proto_config_add_boolean 'bonding:bool'
-	proto_config_add_boolean 'bridge_loop_avoidance:bool'
-	proto_config_add_boolean 'distributed_arp_table:bool'
-	proto_config_add_boolean 'fragmentation:bool'
-	proto_config_add_string 'gw_bandwidth'
-	proto_config_add_string 'gw_mode'
-	proto_config_add_int 'gw_sel_class'
-	proto_config_add_int 'hop_penalty'
-	proto_config_add_string 'isolation_mark'
-	proto_config_add_string 'log_level'
-	proto_config_add_int 'multicast_fanout'
-	proto_config_add_boolean 'multicast_mode:bool'
-	proto_config_add_boolean 'network_coding:bool'
-	proto_config_add_int 'orig_interval'
-	proto_config_add_string 'routing_algo'
-}
-
-proto_batadv_setup() {
-	local config="$1"
-	local iface="$config"
-
-	local aggregated_ogms
-	local ap_isolation
-	local bonding
-	local bridge_loop_avoidance
-	local distributed_arp_table
-	local fragmentation
-	local gw_bandwidth
-	local gw_mode
-	local gw_sel_class
-	local hop_penalty
-	local isolation_mark
-	local log_level
-	local multicast_fanout
-	local multicast_mode
-	local network_coding
-	local orig_interval
-	local routing_algo
-
-	json_get_vars aggregated_ogms
-	json_get_vars ap_isolation
-	json_get_vars bonding
-	json_get_vars bridge_loop_avoidance
-	json_get_vars distributed_arp_table
-	json_get_vars fragmentation
-	json_get_vars gw_bandwidth
-	json_get_vars gw_mode
-	json_get_vars gw_sel_class
-	json_get_vars hop_penalty
-	json_get_vars isolation_mark
-	json_get_vars log_level
-	json_get_vars multicast_fanout
-	json_get_vars multicast_mode
-	json_get_vars network_coding
-	json_get_vars orig_interval
-	json_get_vars routing_algo
-
-	set_default routing_algo 'BATMAN_IV'
-
-	batctl routing_algo "$routing_algo"
-	batctl meshif "$iface" interface create
-
-	[ -n "$aggregated_ogms" ] && batctl meshif "$iface" aggregation "$aggregated_ogms"
-	[ -n "$ap_isolation" ] && batctl meshif "$iface" ap_isolation "$ap_isolation"
-	[ -n "$bonding" ] && batctl meshif "$iface" bonding "$bonding"
-	[ -n "$bridge_loop_avoidance" ] &&  batctl meshif "$iface" bridge_loop_avoidance "$bridge_loop_avoidance" 2>&-
-	[ -n "$distributed_arp_table" ] && batctl meshif "$iface" distributed_arp_table "$distributed_arp_table" 2>&-
-	[ -n "$fragmentation" ] && batctl meshif "$iface" fragmentation "$fragmentation"
-
-	case "$gw_mode" in
-	server)
-		if [ -n "$gw_bandwidth" ]; then
-			batctl meshif "$iface" gw_mode "server" "$gw_bandwidth"
-		else
-			batctl meshif "$iface" gw_mode "server"
-		fi
-		;;
-	client)
-		if [ -n "$gw_sel_class" ]; then
-			batctl meshif "$iface" gw_mode "client" "$gw_sel_class"
-		else
-			batctl meshif "$iface" gw_mode "client"
-		fi
-		;;
-	*)
-		batctl meshif "$iface" gw_mode "off"
-		;;
-	esac
-
-	[ -n "$hop_penalty" ] && batctl meshif "$iface" hop_penalty "$hop_penalty"
-	[ -n "$isolation_mark" ] && batctl meshif "$iface" isolation_mark "$isolation_mark"
-	[ -n "$multicast_fanout" ] && batctl meshif "$iface" multicast_fanout "$multicast_fanout"
-	[ -n "$multicast_mode" ] && batctl meshif "$iface" multicast_mode "$multicast_mode" 2>&-
-	[ -n "$network_coding" ] && batctl meshif "$iface" network_coding "$network_coding" 2>&-
-	[ -n "$log_level" ] && batctl meshif "$iface" loglevel "$log_level" 2>&-
-	[ -n "$orig_interval" ] && batctl meshif "$iface" orig_interval "$orig_interval"
-
-	proto_init_update "$iface" 1
-	proto_send_update "$config"
-}
-
-proto_batadv_teardown() {
-	local config="$1"
-	local iface="$config"
-
-	batctl meshif "$iface" interface destroy
-}
-
-add_protocol batadv

feeds/ipq95xx/batman-adv/files/lib/netifd/proto/batadv_hardif.sh

@@ -1,53 +0,0 @@
-#!/bin/sh
-
-[ -n "$INCLUDE_ONLY" ] || {
-	. /lib/functions.sh
-	. ../netifd-proto.sh
-	init_proto "$@"
-}
-
-proto_batadv_hardif_init_config() {
-	proto_config_add_int 'elp_interval'
-	proto_config_add_int 'hop_penalty'
-	proto_config_add_string "master"
-	proto_config_add_string 'throughput_override'
-}
-
-proto_batadv_hardif_setup() {
-	local config="$1"
-	local iface="$2"
-
-	local elp_interval
-	local hop_penalty
-	local master
-	local throughput_override
-
-	json_get_vars elp_interval
-	json_get_vars hop_penalty
-	json_get_vars master
-	json_get_vars throughput_override
-
-	( proto_add_host_dependency "$config" '' "$master" )
-
-	batctl meshif "$master" interface -M add "$iface"
-
-	[ -n "$elp_interval" ] && batctl hardif "$iface" elp_interval "$elp_interval"
-	[ -n "$hop_penalty" ] && batctl hardif "$iface" hop_penalty "$hop_penalty"
-	[ -n "$throughput_override" ] && batctl hardif "$iface" throughput_override "$throughput_override"
-
-	proto_init_update "$iface" 1
-	proto_send_update "$config"
-}
-
-proto_batadv_hardif_teardown() {
-	local config="$1"
-	local iface="$2"
-
-	local master
-
-	json_get_vars master
-
-	batctl meshif "$master" interface -M del "$iface" || true
-}
-
-add_protocol batadv_hardif

feeds/ipq95xx/batman-adv/files/lib/netifd/proto/batadv_vlan.sh

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. ../netifd-proto.sh
-init_proto "$@"
-
-proto_batadv_vlan_init_config() {
-	proto_config_add_boolean 'ap_isolation:bool'
-}
-
-proto_batadv_vlan_setup() {
-	local config="$1"
-	local iface="$2"
-
-	# batadv_vlan options
-	local ap_isolation
-
-	json_get_vars ap_isolation
-
-	[ -n "$ap_isolation" ] && batctl vlan "$iface" ap_isolation "$ap_isolation"
-	proto_init_update "$iface" 1
-	proto_send_update "$config"
-}
-
-add_protocol batadv_vlan

feeds/ipq95xx/batman-adv/patches/0001-Revert-batman-adv-genetlink-move-to-smaller-ops-wher.patch

@@ -1,128 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Sat, 24 Oct 2020 22:51:23 +0200
-Subject: Revert "batman-adv: genetlink: move to smaller ops wherever possible"
-
-The netlink genl_ops interface was splitted into two parts for Linux 5.10.
-The batman-adv code changed to the new one because it doesn't use the more
-complex policy handling of genl_ops. But the backports-5.8-1 version in
-OpenWrt doesn't yet support the new genl_small_ops.
-
-This patch must be dropped directly when OpenWrt switches to backports-5.10
-or newer - otherwise it will not work as expected.
-
-This reverts commit 725b4ef5be840cfcd0ca33b9393c14dee40c10f7.
-
---- a/compat-include/net/genetlink.h
-+++ b/compat-include/net/genetlink.h
-@@ -31,17 +31,15 @@ void batadv_genl_dump_check_consistent(s
- #endif /* LINUX_VERSION_IS_LESS(4, 15, 0) */
- 
- 
--#if LINUX_VERSION_IS_LESS(5, 10, 0)
--
- #if LINUX_VERSION_IS_LESS(5, 2, 0)
-+
- enum genl_validate_flags {
- 	GENL_DONT_VALIDATE_STRICT		= BIT(0),
- 	GENL_DONT_VALIDATE_DUMP			= BIT(1),
- 	GENL_DONT_VALIDATE_DUMP_STRICT		= BIT(2),
- };
--#endif /* LINUX_VERSION_IS_LESS(5, 2, 0) */
- 
--struct batadv_genl_small_ops {
-+struct batadv_genl_ops {
- 	int		       (*doit)(struct sk_buff *skb,
- 				       struct genl_info *info);
- 	int		       (*dumpit)(struct sk_buff *skb,
-@@ -70,9 +68,9 @@ struct batadv_genl_family {
- 			 struct genl_info *info);
-         void (*post_doit)(const struct genl_ops *ops, struct sk_buff *skb,
- 			  struct genl_info *info);
--	const struct batadv_genl_small_ops *small_ops;
-+	const struct batadv_genl_ops *ops;
- 	const struct genl_multicast_group *mcgrps;
--	unsigned int n_small_ops;
-+	unsigned int n_ops;
- 	unsigned int n_mcgrps;
- 	struct module *module;
- 
-@@ -96,32 +94,24 @@ static inline int batadv_genl_register_f
- 	family->family.pre_doit = family->pre_doit;
- 	family->family.post_doit = family->post_doit;
- 	family->family.mcgrps = family->mcgrps;
--	family->family.n_ops = family->n_small_ops;
-+	family->family.n_ops = family->n_ops;
- 	family->family.n_mcgrps = family->n_mcgrps;
- 	family->family.module = family->module;
- 
--	ops = kzalloc(sizeof(*ops) * family->n_small_ops, GFP_KERNEL);
-+	ops = kzalloc(sizeof(*ops) * family->n_ops, GFP_KERNEL);
- 	if (!ops)
- 		return -ENOMEM;
- 
- 	for (i = 0; i < family->family.n_ops; i++) {
--		ops[i].doit = family->small_ops[i].doit;
--		ops[i].dumpit = family->small_ops[i].dumpit;
--		ops[i].done = family->small_ops[i].done;
--		ops[i].cmd = family->small_ops[i].cmd;
--		ops[i].internal_flags = family->small_ops[i].internal_flags;
--		ops[i].flags = family->small_ops[i].flags;
--#if LINUX_VERSION_IS_GEQ(5, 2, 0)
--		ops[i].validate = family->small_ops[i].validate;
--#else
-+		ops[i].doit = family->ops[i].doit;
-+		ops[i].dumpit = family->ops[i].dumpit;
-+		ops[i].done = family->ops[i].done;
-+		ops[i].cmd = family->ops[i].cmd;
-+		ops[i].internal_flags = family->ops[i].internal_flags;
-+		ops[i].flags = family->ops[i].flags;
- 		ops[i].policy = family->policy;
--#endif
- 	}
- 
--#if LINUX_VERSION_IS_GEQ(5, 2, 0)
--	family->family.policy = family->policy;
--#endif
--
- 	family->family.ops = ops;
- 	family->copy_ops = ops;
- 
-@@ -136,7 +126,7 @@ typedef struct genl_ops batadv_genl_ops_
- #define batadv_post_doit(__x, __y, __z) \
- 	batadv_post_doit(const batadv_genl_ops_old *ops, __y, __z)
- 
--#define genl_small_ops batadv_genl_small_ops
-+#define genl_ops batadv_genl_ops
- #define genl_family batadv_genl_family
- 
- #define genl_register_family(family) \
-@@ -160,6 +150,6 @@ batadv_genl_unregister_family(struct bat
- 	genlmsg_multicast_netns(&(_family)->family, _net, _skb, _portid, \
- 				_group, _flags)
- 
--#endif /* LINUX_VERSION_IS_LESS(5, 10, 0) */
-+#endif /* LINUX_VERSION_IS_LESS(5, 2, 0) */
- 
- #endif /* _NET_BATMAN_ADV_COMPAT_NET_GENETLINK_H_ */
---- a/net/batman-adv/netlink.c
-+++ b/net/batman-adv/netlink.c
-@@ -1357,7 +1357,7 @@ static void batadv_post_doit(const struc
- 	}
- }
- 
--static const struct genl_small_ops batadv_netlink_ops[] = {
-+static const struct genl_ops batadv_netlink_ops[] = {
- 	{
- 		.cmd = BATADV_CMD_GET_MESH,
- 		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
-@@ -1491,8 +1491,8 @@ struct genl_family batadv_netlink_family
- 	.pre_doit = batadv_pre_doit,
- 	.post_doit = batadv_post_doit,
- 	.module = THIS_MODULE,
--	.small_ops = batadv_netlink_ops,
--	.n_small_ops = ARRAY_SIZE(batadv_netlink_ops),
-+	.ops = batadv_netlink_ops,
-+	.n_ops = ARRAY_SIZE(batadv_netlink_ops),
- 	.mcgrps = batadv_netlink_mcgrps,
- 	.n_mcgrps = ARRAY_SIZE(batadv_netlink_mcgrps),
- };

feeds/ipq95xx/batman-adv/patches/0002-Revert-batman-adv-Add-new-include-for-min-max-helper.patch

@@ -1,116 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Thu, 28 Jan 2021 21:06:51 +0100
-Subject: Revert "batman-adv: Add new include for min/max helpers"
-
-The OpenWrt kernel sources and backports sources are currently missing this
-header.
-
-This reverts commit 1810de05310d5c5e9140f870ac21052f38bc06b8.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
---- a/compat-include/linux/minmax.h
-+++ /dev/null
-@@ -1,20 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--/* Copyright (C) B.A.T.M.A.N. contributors:
-- *
-- * Marek Lindner, Simon Wunderlich
-- *
-- * This file contains macros for maintaining compatibility with older versions
-- * of the Linux kernel.
-- */
--
--#ifndef _NET_BATMAN_ADV_COMPAT_LINUX_MINMAX_H_
--#define _NET_BATMAN_ADV_COMPAT_LINUX_MINMAX_H_
--
--#include <linux/version.h>
--#if LINUX_VERSION_IS_GEQ(5, 10, 0)
--#include_next <linux/minmax.h>
--#else
--#include <linux/kernel.h>
--#endif
--
--#endif /* _NET_BATMAN_ADV_COMPAT_LINUX_MINMAX_H_ */
---- a/net/batman-adv/bat_v.c
-+++ b/net/batman-adv/bat_v.c
-@@ -15,7 +15,6 @@
- #include <linux/jiffies.h>
- #include <linux/kref.h>
- #include <linux/list.h>
--#include <linux/minmax.h>
- #include <linux/netdevice.h>
- #include <linux/netlink.h>
- #include <linux/rculist.h>
---- a/net/batman-adv/bat_v_elp.c
-+++ b/net/batman-adv/bat_v_elp.c
-@@ -18,7 +18,6 @@
- #include <linux/jiffies.h>
- #include <linux/kernel.h>
- #include <linux/kref.h>
--#include <linux/minmax.h>
- #include <linux/netdevice.h>
- #include <linux/nl80211.h>
- #include <linux/prandom.h>
---- a/net/batman-adv/bat_v_ogm.c
-+++ b/net/batman-adv/bat_v_ogm.c
-@@ -18,7 +18,6 @@
- #include <linux/kref.h>
- #include <linux/list.h>
- #include <linux/lockdep.h>
--#include <linux/minmax.h>
- #include <linux/mutex.h>
- #include <linux/netdevice.h>
- #include <linux/prandom.h>
---- a/net/batman-adv/fragmentation.c
-+++ b/net/batman-adv/fragmentation.c
-@@ -14,8 +14,8 @@
- #include <linux/gfp.h>
- #include <linux/if_ether.h>
- #include <linux/jiffies.h>
-+#include <linux/kernel.h>
- #include <linux/lockdep.h>
--#include <linux/minmax.h>
- #include <linux/netdevice.h>
- #include <linux/skbuff.h>
- #include <linux/slab.h>
---- a/net/batman-adv/hard-interface.c
-+++ b/net/batman-adv/hard-interface.c
-@@ -17,7 +17,6 @@
- #include <linux/kref.h>
- #include <linux/limits.h>
- #include <linux/list.h>
--#include <linux/minmax.h>
- #include <linux/mutex.h>
- #include <linux/netdevice.h>
- #include <linux/printk.h>
---- a/net/batman-adv/main.c
-+++ b/net/batman-adv/main.c
-@@ -23,7 +23,6 @@
- #include <linux/kobject.h>
- #include <linux/kref.h>
- #include <linux/list.h>
--#include <linux/minmax.h>
- #include <linux/module.h>
- #include <linux/netdevice.h>
- #include <linux/printk.h>
---- a/net/batman-adv/netlink.c
-+++ b/net/batman-adv/netlink.c
-@@ -23,7 +23,6 @@
- #include <linux/kernel.h>
- #include <linux/limits.h>
- #include <linux/list.h>
--#include <linux/minmax.h>
- #include <linux/netdevice.h>
- #include <linux/netlink.h>
- #include <linux/printk.h>
---- a/net/batman-adv/tp_meter.c
-+++ b/net/batman-adv/tp_meter.c
-@@ -23,7 +23,6 @@
- #include <linux/kthread.h>
- #include <linux/limits.h>
- #include <linux/list.h>
--#include <linux/minmax.h>
- #include <linux/netdevice.h>
- #include <linux/param.h>
- #include <linux/printk.h>

feeds/ipq95xx/batman-adv/patches/0003-batman-adv-Fix-build-of-multicast-code-against-Linux.patch

@@ -1,34 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Fri, 14 May 2021 19:34:35 +0200
-Subject: batman-adv: Fix build of multicast code against Linux < 5.13
-
-Fixes: 007b4c4b031f ("batman-adv: convert ifmcaddr6 to RCU")
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
---- a/net/batman-adv/multicast.c
-+++ b/net/batman-adv/multicast.c
-@@ -422,9 +422,14 @@ batadv_mcast_mla_softif_get_ipv6(struct
- 		return 0;
- 	}
- 
-+#if LINUX_VERSION_IS_LESS(5, 13, 0)
-+	read_lock_bh(&in6_dev->lock);
-+	for (pmc6 = in6_dev->mc_list; pmc6; pmc6 = pmc6->next) {
-+#else
- 	for (pmc6 = rcu_dereference(in6_dev->mc_list);
- 	     pmc6;
- 	     pmc6 = rcu_dereference(pmc6->next)) {
-+#endif
- 		if (IPV6_ADDR_MC_SCOPE(&pmc6->mca_addr) <
- 		    IPV6_ADDR_SCOPE_LINKLOCAL)
- 			continue;
-@@ -453,6 +458,9 @@ batadv_mcast_mla_softif_get_ipv6(struct
- 		hlist_add_head(&new->list, mcast_list);
- 		ret++;
- 	}
-+#if LINUX_VERSION_IS_LESS(5, 13, 0)
-+	read_unlock_bh(&in6_dev->lock);
-+#endif
- 	rcu_read_unlock();
- 
- 	return ret;

feeds/ipq95xx/batman-adv/patches/0004-Revert-batman-adv-Switch-to-kstrtox.h-for-kstrtou64.patch

@@ -1,19 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Tue, 14 Sep 2021 21:02:10 +0200
-Subject: Revert "batman-adv: Switch to kstrtox.h for kstrtou64"
-
-This header is only available after Linux 5.14
-
-This reverts commit c9a69cb4048ebef3a4d91835669011a26d9b7dab.
-
---- a/net/batman-adv/gateway_common.c
-+++ b/net/batman-adv/gateway_common.c
-@@ -10,7 +10,7 @@
- #include <linux/atomic.h>
- #include <linux/byteorder/generic.h>
- #include <linux/errno.h>
--#include <linux/kstrtox.h>
-+#include <linux/kernel.h>
- #include <linux/limits.h>
- #include <linux/math64.h>
- #include <linux/netdevice.h>

feeds/ipq95xx/batman-adv/patches/0005-Revert-batman-adv-use-Linux-s-stdarg.h.patch

@@ -1,19 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Tue, 14 Sep 2021 21:07:34 +0200
-Subject: Revert "batman-adv: use Linux's stdarg.h"
-
-This header is only available since Linux 5.15
-
-This reverts commit 36d059797a14f0e373fdc3c79df7b467435925ad.
-
---- a/net/batman-adv/log.c
-+++ b/net/batman-adv/log.c
-@@ -7,7 +7,7 @@
- #include "log.h"
- #include "main.h"
- 
--#include <linux/stdarg.h>
-+#include <stdarg.h>
- 
- #include "trace.h"
- 

feeds/ipq95xx/batman-adv/patches/0006-batman-adv-make-mc_forwarding-atomic.patch

@@ -1,27 +0,0 @@
-From: Eric Dumazet <edumazet@google.com>
-Date: Wed, 2 Mar 2022 20:05:13 +0100
-Subject: batman-adv: make mc_forwarding atomic
-
-This fixes minor data-races in ip6_mc_input() and
-batadv_mcast_mla_rtr_flags_softif_get_ipv6()
-
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-[sven@narfation.org: Add ugly hack to get it building with old kernels]
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/56db7c0540e733a1f063ccd6bab1b537a80857eb
-
---- a/net/batman-adv/multicast.c
-+++ b/net/batman-adv/multicast.c
-@@ -134,7 +134,11 @@ static u8 batadv_mcast_mla_rtr_flags_sof
- {
- 	struct inet6_dev *in6_dev = __in6_dev_get(dev);
- 
-+#if LINUX_VERSION_IS_GEQ(5, 18, 0) // UGLY_HACK_NEW
-+	if (in6_dev && atomic_read(&in6_dev->cnf.mc_forwarding))
-+#else // UGLY_HACK_OLD
- 	if (in6_dev && in6_dev->cnf.mc_forwarding)
-+#endif // UGLY_HACK_STOP
- 		return BATADV_NO_FLAGS;
- 	else
- 		return BATADV_MCAST_WANT_NO_RTR6;

feeds/ipq95xx/batman-adv/patches/0007-batman-adv-compat-Add-atomic-mc_fowarding-support-fo.patch

@@ -1,23 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Fri, 15 Apr 2022 15:12:45 +0200
-Subject: batman-adv: compat: Add atomic mc_fowarding support for stable kernels
-
-Fixes: 56db7c0540e7 ("batman-adv: make mc_forwarding atomic")
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/350adcaec82fbaa358a2406343b6130ac8dad126
-
---- a/net/batman-adv/multicast.c
-+++ b/net/batman-adv/multicast.c
-@@ -134,7 +134,11 @@ static u8 batadv_mcast_mla_rtr_flags_sof
- {
- 	struct inet6_dev *in6_dev = __in6_dev_get(dev);
- 
--#if LINUX_VERSION_IS_GEQ(5, 18, 0) // UGLY_HACK_NEW
-+#if (LINUX_VERSION_IS_GEQ(5, 4, 189) && LINUX_VERSION_IS_LESS(5, 5, 0)) || /* UGLY_HACK */ \
-+    (LINUX_VERSION_IS_GEQ(5, 10, 111) && LINUX_VERSION_IS_LESS(5, 11, 0)) || /* UGLY_HACK */ \
-+    (LINUX_VERSION_IS_GEQ(5, 15, 34) && LINUX_VERSION_IS_LESS(5, 16, 0)) || /* UGLY_HACK */ \
-+    (LINUX_VERSION_IS_GEQ(5, 16, 20) && LINUX_VERSION_IS_LESS(5, 17, 0)) || /* UGLY_HACK */ \
-+    LINUX_VERSION_IS_GEQ(5, 17, 3) // UGLY_HACK_NEW
- 	if (in6_dev && atomic_read(&in6_dev->cnf.mc_forwarding))
- #else // UGLY_HACK_OLD
- 	if (in6_dev && in6_dev->cnf.mc_forwarding)

feeds/ipq95xx/batman-adv/patches/0008-batman-adv-Request-iflink-once-in-batadv-on-batadv-c.patch

@@ -1,44 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Wed, 2 Mar 2022 19:49:44 +0100
-Subject: batman-adv: Request iflink once in batadv-on-batadv check
-
-There is no need to call dev_get_iflink multiple times for the same
-net_device in batadv_is_on_batman_iface. And since some of the
-.ndo_get_iflink callbacks are dynamic (for example via RCUs like in
-vxcan_get_iflink), it could easily happen that the returned values are not
-stable. The pre-checks before __dev_get_by_index are then of course bogus.
-
-Fixes: 3d48811b27f5 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/f6c0c45356fe3ab9c5e01b81d060f8a436658037
-
---- a/net/batman-adv/hard-interface.c
-+++ b/net/batman-adv/hard-interface.c
-@@ -148,22 +148,23 @@ static bool batadv_is_on_batman_iface(co
- 	struct net *net = dev_net(net_dev);
- 	struct net_device *parent_dev;
- 	struct net *parent_net;
-+	int iflink;
- 	bool ret;
- 
- 	/* check if this is a batman-adv mesh interface */
- 	if (batadv_softif_is_valid(net_dev))
- 		return true;
- 
-+	iflink = dev_get_iflink(net_dev);
-+
- 	/* no more parents..stop recursion */
--	if (dev_get_iflink(net_dev) == 0 ||
--	    dev_get_iflink(net_dev) == net_dev->ifindex)
-+	if (iflink == 0 || iflink == net_dev->ifindex)
- 		return false;
- 
- 	parent_net = batadv_getlink_net(net_dev, net);
- 
- 	/* recurse over the parent device */
--	parent_dev = __dev_get_by_index((struct net *)parent_net,
--					dev_get_iflink(net_dev));
-+	parent_dev = __dev_get_by_index((struct net *)parent_net, iflink);
- 	/* if we got a NULL parent_dev there is something broken.. */
- 	if (!parent_dev) {
- 		pr_err("Cannot find parent device\n");

feeds/ipq95xx/batman-adv/patches/0009-batman-adv-Request-iflink-once-in-batadv_get_real_ne.patch

@@ -1,46 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Wed, 2 Mar 2022 19:49:45 +0100
-Subject: batman-adv: Request iflink once in batadv_get_real_netdevice
-
-There is no need to call dev_get_iflink multiple times for the same
-net_device in batadv_get_real_netdevice. And since some of the
-ndo_get_iflink callbacks are dynamic (for example via RCUs like in
-vxcan_get_iflink), it could easily happen that the returned values are not
-stable. The pre-checks before __dev_get_by_index are then of course bogus.
-
-Fixes: 2b45bb6c3aad ("batman-adv: additional checks for virtual interfaces on top of WiFi")
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/445f477ec3e805425186f5fbe8ed0fe89cc226b6
-
---- a/net/batman-adv/hard-interface.c
-+++ b/net/batman-adv/hard-interface.c
-@@ -214,14 +214,16 @@ static struct net_device *batadv_get_rea
- 	struct net_device *real_netdev = NULL;
- 	struct net *real_net;
- 	struct net *net;
--	int ifindex;
-+	int iflink;
- 
- 	ASSERT_RTNL();
- 
- 	if (!netdev)
- 		return NULL;
- 
--	if (netdev->ifindex == dev_get_iflink(netdev)) {
-+	iflink = dev_get_iflink(netdev);
-+
-+	if (netdev->ifindex == iflink) {
- 		dev_hold(netdev);
- 		return netdev;
- 	}
-@@ -231,9 +233,8 @@ static struct net_device *batadv_get_rea
- 		goto out;
- 
- 	net = dev_net(hard_iface->soft_iface);
--	ifindex = dev_get_iflink(netdev);
- 	real_net = batadv_getlink_net(netdev, net);
--	real_netdev = dev_get_by_index(real_net, ifindex);
-+	real_netdev = dev_get_by_index(real_net, iflink);
- 
- out:
- 	batadv_hardif_put(hard_iface);

feeds/ipq95xx/batman-adv/patches/0010-batman-adv-Don-t-expect-inter-netns-unique-iflink-in.patch

@@ -1,86 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Wed, 2 Mar 2022 19:49:46 +0100
-Subject: batman-adv: Don't expect inter-netns unique iflink indices
-
-The ifindex doesn't have to be unique for multiple network namespaces on
-the same machine.
-
-  $ ip netns add test1
-  $ ip -net test1 link add dummy1 type dummy
-  $ ip netns add test2
-  $ ip -net test2 link add dummy2 type dummy
-
-  $ ip -net test1 link show dev dummy1
-  6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
-      link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff
-  $ ip -net test2 link show dev dummy2
-  6: dummy2: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
-      link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff
-
-But the batman-adv code to walk through the various layers of virtual
-interfaces uses this assumption because dev_get_iflink handles it
-internally and doesn't return the actual netns of the iflink. And
-dev_get_iflink only documents the situation where ifindex == iflink for
-physical devices.
-
-But only checking for dev->netdev_ops->ndo_get_iflink is also not an option
-because ipoib_get_iflink implements it even when it sometimes returns an
-iflink != ifindex and sometimes iflink == ifindex. The caller must
-therefore make sure itself to check both netns and iflink + ifindex for
-equality. Only when they are equal, a "physical" interface was detected
-which should stop the traversal. On the other hand, vxcan_get_iflink can
-also return 0 in case there was currently no valid peer. In this case, it
-is still necessary to stop.
-
-Fixes: 3d48811b27f5 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
-Fixes: 2b45bb6c3aad ("batman-adv: additional checks for virtual interfaces on top of WiFi")
-Reported-by: Sabrina Dubroca <sd@queasysnail.net>
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/0aac7a9fbbbeec25f2f54a9e6d53ea91217ba720
-
---- a/net/batman-adv/hard-interface.c
-+++ b/net/batman-adv/hard-interface.c
-@@ -156,13 +156,15 @@ static bool batadv_is_on_batman_iface(co
- 		return true;
- 
- 	iflink = dev_get_iflink(net_dev);
--
--	/* no more parents..stop recursion */
--	if (iflink == 0 || iflink == net_dev->ifindex)
-+	if (iflink == 0)
- 		return false;
- 
- 	parent_net = batadv_getlink_net(net_dev, net);
- 
-+	/* iflink to itself, most likely physical device */
-+	if (net == parent_net && iflink == net_dev->ifindex)
-+		return false;
-+
- 	/* recurse over the parent device */
- 	parent_dev = __dev_get_by_index((struct net *)parent_net, iflink);
- 	/* if we got a NULL parent_dev there is something broken.. */
-@@ -222,8 +224,7 @@ static struct net_device *batadv_get_rea
- 		return NULL;
- 
- 	iflink = dev_get_iflink(netdev);
--
--	if (netdev->ifindex == iflink) {
-+	if (iflink == 0) {
- 		dev_hold(netdev);
- 		return netdev;
- 	}
-@@ -234,6 +235,14 @@ static struct net_device *batadv_get_rea
- 
- 	net = dev_net(hard_iface->soft_iface);
- 	real_net = batadv_getlink_net(netdev, net);
-+
-+	/* iflink to itself, most likely physical device */
-+	if (net == real_net && netdev->ifindex == iflink) {
-+		real_netdev = netdev;
-+		dev_hold(real_netdev);
-+		goto out;
-+	}
-+
- 	real_netdev = dev_get_by_index(real_net, iflink);
- 
- out:

feeds/ipq95xx/batman-adv/patches/0011-batman-adv-Don-t-skb_split-skbuffs-with-frag_list.patch

@@ -1,46 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Sat, 16 Apr 2022 14:24:34 +0200
-Subject: batman-adv: Don't skb_split skbuffs with frag_list
-
-The receiving interface might have used GRO to receive more fragments than
-MAX_SKB_FRAGS fragments. In this case, these will not be stored in
-skb_shinfo(skb)->frags but merged into the frag list.
-
-batman-adv relies on the function skb_split to split packets up into
-multiple smaller packets which are not larger than the MTU on the outgoing
-interface. But this function cannot handle frag_list entries and is only
-operating on skb_shinfo(skb)->frags. If it is still trying to split such an
-skb and xmit'ing it on an interface without support for NETIF_F_FRAGLIST,
-then validate_xmit_skb() will try to linearize it. But this fails due to
-inconsistent information. And __pskb_pull_tail will trigger a BUG_ON after
-skb_copy_bits() returns an error.
-
-In case of entries in frag_list, just linearize the skb before operating on
-it with skb_split().
-
-Reported-by: Felix Kaechele <felix@kaechele.ca>
-Tested-by: Felix Kaechele <felix@kaechele.ca>
-Fixes: 9de347143505 ("batman-adv: layer2 unicast packet fragmentation")
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-Origin: upstream, https://git.open-mesh.org/batman-adv.git/commit/d467720acaf1b22b0cee58144eeaf9ef6c5e285c
-
---- a/net/batman-adv/fragmentation.c
-+++ b/net/batman-adv/fragmentation.c
-@@ -475,6 +475,17 @@ int batadv_frag_send_packet(struct sk_bu
- 		goto free_skb;
- 	}
- 
-+	/* GRO might have added fragments to the fragment list instead of
-+	 * frags[]. But this is not handled by skb_split and must be
-+	 * linearized to avoid incorrect length information after all
-+	 * batman-adv fragments were created and submitted to the
-+	 * hard-interface
-+	 */
-+	if (skb_has_frag_list(skb) && __skb_linearize(skb)) {
-+		ret = -ENOMEM;
-+		goto free_skb;
-+	}
-+
- 	/* Create one header to be copied to all fragments */
- 	frag_header.packet_type = BATADV_UNICAST_FRAG;
- 	frag_header.version = BATADV_COMPAT_VERSION;

feeds/ipq95xx/batman-adv/src/compat-hacks.h

@@ -1,179 +0,0 @@
-/* Please avoid adding hacks here - instead add it to mac80211/backports.git */
-
-#undef CONFIG_MODULE_STRIPPED
-
-#include <linux/version.h>	/* LINUX_VERSION_CODE */
-#include <linux/types.h>
-
-#if LINUX_VERSION_IS_LESS(5, 10, 0)
-
-#include <linux/if_bridge.h>
-
-struct batadv_br_ip {
-	union {
-		__be32  ip4;
-#if IS_ENABLED(CONFIG_IPV6)
-		struct in6_addr ip6;
-#endif
-	} dst;
-	__be16          proto;
-	__u16           vid;
-};
-
-struct batadv_br_ip_list {
-	struct list_head list;
-	struct batadv_br_ip addr;
-};
-
-#if 0
-/* "static" dropped to force compiler to evaluate it as part of multicast.c
- * might need to be added again and then called in some kind of dummy
- * compat.c in case this header is included in multiple files.
- */
-inline void __batadv_br_ip_list_check(void)
-{
-	BUILD_BUG_ON(sizeof(struct batadv_br_ip_list) != sizeof(struct br_ip_list));
-	BUILD_BUG_ON(offsetof(struct batadv_br_ip_list, list) != offsetof(struct br_ip_list, list));
-	BUILD_BUG_ON(offsetof(struct batadv_br_ip_list, addr) != offsetof(struct br_ip_list, addr));
-
-	BUILD_BUG_ON(sizeof(struct batadv_br_ip) != sizeof(struct br_ip));
-	BUILD_BUG_ON(offsetof(struct batadv_br_ip, dst.ip4) != offsetof(struct br_ip, u.ip4));
-	BUILD_BUG_ON(offsetof(struct batadv_br_ip, dst.ip6) != offsetof(struct br_ip, u.ip6));
-	BUILD_BUG_ON(offsetof(struct batadv_br_ip, proto) != offsetof(struct br_ip, proto));
-	BUILD_BUG_ON(offsetof(struct batadv_br_ip, vid) != offsetof(struct br_ip, vid));
-}
-#endif
-
-#define br_ip batadv_br_ip
-#define br_ip_list batadv_br_ip_list
-
-#endif /* LINUX_VERSION_IS_LESS(5, 10, 0) */
-
-#if LINUX_VERSION_IS_LESS(5, 14, 0)
-
-#include <linux/if_bridge.h>
-#include <net/addrconf.h>
-
-#if IS_ENABLED(CONFIG_IPV6)
-static inline bool
-br_multicast_has_router_adjacent(struct net_device *dev, int proto)
-{
-	struct list_head bridge_mcast_list = LIST_HEAD_INIT(bridge_mcast_list);
-	struct br_ip_list *br_ip_entry, *tmp;
-	int ret;
-
-	if (proto != ETH_P_IPV6)
-		return true;
-
-	ret = br_multicast_list_adjacent(dev, &bridge_mcast_list);
-	if (ret < 0)
-		return true;
-
-	ret = false;
-
-	list_for_each_entry_safe(br_ip_entry, tmp, &bridge_mcast_list, list) {
-		if (br_ip_entry->addr.proto == htons(ETH_P_IPV6) &&
-		    ipv6_addr_is_ll_all_routers(&br_ip_entry->addr.dst.ip6))
-			ret = true;
-
-		list_del(&br_ip_entry->list);
-		kfree(br_ip_entry);
-	}
-
-	return ret;
-}
-#else
-static inline bool
-br_multicast_has_router_adjacent(struct net_device *dev, int proto)
-{
-	return true;
-}
-#endif
-
-#endif /* LINUX_VERSION_IS_LESS(5, 14, 0) */
-
-#if LINUX_VERSION_IS_LESS(5, 15, 0)
-
-static inline void batadv_eth_hw_addr_set(struct net_device *dev,
-					  const u8 *addr)
-{
-	ether_addr_copy(dev->dev_addr, addr);
-}
-#define eth_hw_addr_set batadv_eth_hw_addr_set
-
-#endif /* LINUX_VERSION_IS_LESS(5, 15, 0) */
-
-/* <DECLARE_EWMA> */
-
-#include <linux/version.h>
-#include_next <linux/average.h>
-
-#include <linux/bug.h>
-
-#ifdef DECLARE_EWMA
-#undef DECLARE_EWMA
-#endif /* DECLARE_EWMA */
-
-/*
- * Exponentially weighted moving average (EWMA)
- *
- * This implements a fixed-precision EWMA algorithm, with both the
- * precision and fall-off coefficient determined at compile-time
- * and built into the generated helper funtions.
- *
- * The first argument to the macro is the name that will be used
- * for the struct and helper functions.
- *
- * The second argument, the precision, expresses how many bits are
- * used for the fractional part of the fixed-precision values.
- *
- * The third argument, the weight reciprocal, determines how the
- * new values will be weighed vs. the old state, new values will
- * get weight 1/weight_rcp and old values 1-1/weight_rcp. Note
- * that this parameter must be a power of two for efficiency.
- */
-
-#define DECLARE_EWMA(name, _precision, _weight_rcp)			\
-	struct ewma_##name {						\
-		unsigned long internal;					\
-	};								\
-	static inline void ewma_##name##_init(struct ewma_##name *e)	\
-	{								\
-		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
-		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
-		/*							\
-		 * Even if you want to feed it just 0/1 you should have	\
-		 * some bits for the non-fractional part...		\
-		 */							\
-		BUILD_BUG_ON((_precision) > 30);			\
-		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
-		e->internal = 0;					\
-	}								\
-	static inline unsigned long					\
-	ewma_##name##_read(struct ewma_##name *e)			\
-	{								\
-		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
-		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
-		BUILD_BUG_ON((_precision) > 30);			\
-		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
-		return e->internal >> (_precision);			\
-	}								\
-	static inline void ewma_##name##_add(struct ewma_##name *e,	\
-					     unsigned long val)		\
-	{								\
-		unsigned long internal = READ_ONCE(e->internal);	\
-		unsigned long weight_rcp = ilog2(_weight_rcp);		\
-		unsigned long precision = _precision;			\
-									\
-		BUILD_BUG_ON(!__builtin_constant_p(_precision));	\
-		BUILD_BUG_ON(!__builtin_constant_p(_weight_rcp));	\
-		BUILD_BUG_ON((_precision) > 30);			\
-		BUILD_BUG_ON_NOT_POWER_OF_2(_weight_rcp);		\
-									\
-		WRITE_ONCE(e->internal, internal ?			\
-			(((internal << weight_rcp) - internal) +	\
-				(val << precision)) >> weight_rcp :	\
-			(val << precision));				\
-	}
-
-/* </DECLARE_EWMA> */

feeds/ipq95xx/ftm/Makefile

@@ -1,82 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG:=ftm
-PKG_NAME:=$(PKG)
-PKG_RELEASE:=1
-
-LOCAL_SRC:=$(TOPDIR)/qca/src/common-tools/ftm
-
-PKG_VERSION:=12.3
-
-#PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=QCA
-  CATEGORY:=QTI software
-  URL:=http://www.qca.qualcomm.com
-  MAINTAINER:=Qualcomm Atheros
-  TITLE:= QCA ftm utils
-  DEPENDS:= @TARGET_ipq_ipq807x||TARGET_ipq_ipq807x_64||TARGET_ipq_ipq60xx||TARGET_ipq_ipq60xx_64||TARGET_ipq_ipq50xx||TARGET_ipq_ipq50xx_64||TARGET_ipq807x||TARGET_ipq50xx||TARGET_ipq60xx||TARGET_ipq95xx||TARGET_ipq53xx +libnl +libtcmd +qca-diag +librt +kmod-diag-char
-endef
-
-define Package/$(PKG_NAME)/description/Default
-	FTM Package Support for QCA WIFI 11 drivers
-endef
-
-TARGET_CFLAGS += -DCONFIG_FTM_WLAN -DDEBUG -DFTM_DEBUG -DWIN_AP_HOST
-TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/qca-diag
-TARGET_CFLAGS += -MMD -O2 -Wall -g
-TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include
-TARGET_CFLAGS += -fpie
-TARGET_LDFLAGS += -ldiag -lnl-3 -lnl-genl-3 -lrt -ltcmd
-TARGET_CSRCS := ftm_main.c ftm_wlan.c ftm_write_to_flash.c
-TARGET_LDFLAGS += -pie
-
-ifeq ($(CONFIG_FEATURE_IPQ_PROVISION_SUPPORT),y)
-        TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/qti-mfg-provision
-        TARGET_CFLAGS += -DWIN_AP_AFC
-        TARGET_LDFLAGS += -lprovision
-endif
-
-ifneq ($(CONFIG_PACKAGE_kmod-mac80211),)
-        TARGET_CFLAGS+=-DWIN_AP_HOST_OPEN=1
-endif
-
-ifeq ($(CONFIG_FEATURE_QCA_IOT),y)
-TARGET_CFLAGS += -DIPQ_AP_HOST_IOT -DIPQ_AP_HOST_IOT_QCA402X -ggdb3 -DCONFIG_DAEMON_MODE
-TARGET_CSRCS += ftm_iot.c
-TARGET_LDFLAGS += -lpthread
-TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/qca-iot
-TARGET_LDFLAGS += -ldiag_demo
-endif
-
-ifeq ($(CONFIG_FEATURE_IPQ_IOT_SUPPORT),y)
-TARGET_CFLAGS += -DIPQ_AP_HOST_IOT -DIPQ_AP_HOST_IOT_IPQ -ggdb3 -I$(STAGING_DIR)/usr/include/btdaemon
-TARGET_CSRCS += ftm_iot.c
-TARGET_LDFLAGS += -lpthread -lbtdaemon
-endif
-
-define Build/Compile
-$(MAKE) -C $(PKG_BUILD_DIR) \
-	CC="$(TARGET_CC)" \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	CSRCS="$(TARGET_CSRCS)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ftm $(1)/usr/sbin/
-	$(INSTALL_BIN) ./files/ftm.init $(1)/etc/init.d/ftm
-	$(INSTALL_DIR) $(1)/lib/wifi
-	$(INSTALL_BIN) ./files/compress_vart.sh $(1)/lib/compress_vart.sh
-ifneq (, $(findstring ipq95xx, $(CONFIG_TARGET_BOARD)))
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) ./files/ftm_qcc710_start.sh $(1)/sbin/ftm_qcc710_start
-endif
-endef
-
-$(eval $(call BuildPackage,ftm))

feeds/ipq95xx/ftm/files/compress_vart.sh

@@ -1,75 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2020 Qualcomm Technologies, Inc.
-#
-#  All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-#
-
-[ -e /lib/functions.sh ] && . /lib/functions.sh
-[ -e /lib/ipq806x.sh ] && . /lib/ipq806x.sh
-[ -e /lib/functions/boot.sh ] && . /lib/functions/boot.sh
-
-low_mem_compress_art()
-{
-	local mtdblock=$(find_mtd_part 0:ART)
-
-	if [ -z "$mtdblock" ]; then
-	    # read from mmc
-	    mtdblock=$(find_mmc_part 0:ART)
-	fi
-
-	[ -n "$mtdblock" ] || return
-
-        local apmp="/tmp"
-
-        lzma -zvfk -4 ${apmp}/virtual_art.bin 2> /dev/null || {
-                echo "Error Compressing Virtual ART" > /dev/console
-                return
-        }
-
-	dd if=${apmp}/virtual_art.bin.lzma of=${mtdblock}
-        echo "Success compressing Virtual ART(${mtdblock})" > /dev/console
-        return
-}
-
-normal_art()
-{
-	local mtdblock=$(find_mtd_part 0:ART)
-
-	if [ -z "$mtdblock" ]; then
-	    # read from mmc
-	    mtdblock=$(find_mmc_part 0:ART)
-	fi
-
-	[ -n "$mtdblock" ] || return
-
-	local apmp="/tmp"
-
-	dd if=${apmp}/virtual_art.bin of=${mtdblock}
-	echo "Success writing to ART(${mtdblock})" > /dev/console
-	return
-}
-
-write_caldata()
-{
-	local board
-	[ -f /tmp/sysinfo/board_name ] && {
-		board=ap$(cat /tmp/sysinfo/board_name | awk -F 'ap' '{print$2}')
-	}
-
-	if [ -e /sys/firmware/devicetree/base/compressed_art ]
-	then
-		echo "Compressed ART Supported Platform $board " > /dev/console
-		low_mem_compress_art
-	else
-		echo "Non Compressed ART Platform $board " > /dev/console
-		normal_art
-	fi
-}
-
-if [ "$1" = "write_caldata" ]
-then
-        write_caldata
-fi