The spec does not mandate any way to read back the threshold settings
themselves, but when a threshold is crossed the AP needs a way to determine
which sensor(s) are responsible. Each reading of the EC_ACPI_MEM_TEMP_ID
register clears and returns one sensor ID that has crossed one of its
thresholds (in either direction) since the last read. A value of 0xFF means
"no new thresholds have tripped". Changing or enabling the thresholds for
any sensor will clear the unread event count for that sensor.
BUG=chrome-os-partner:23970
BRANCH=none
TEST=manual
On the host, set a couple of thresholds to low values so they trip
immediately (I'm testing on Link):
# dptf() {
[ "$#" -eq "2" ] || return;
iotools io_write8 0x66 0x81
iotools io_write8 0x62 $1
iotools io_write8 0x62 $2
}
#
# dptf 5 0
# dptf 6 10
# dptf 7 3
# dptf 5 2
# dptf 6 10
# dptf 7 2
On the EC console, see that two thresholds have triggered, and that there
are two bits set in the AP seen mask:
[45.755365 DPTF sensor 0, threshold -63 C, index 1, enabled]
[45.768940 DPTF sensor 2, threshold -63 C, index 0, enabled]
[46.169490 DPTF over threshold [0][1]
[46.169820 DPTF over threshold [2][0]
> dptftemp
sensor thresh0 thresh1
0 --- 210* I2C-USB C-Die
1 --- --- I2C-USB C-Object
2 210* --- I2C-PCH D-Die
3 --- --- I2C-PCH D-Object
4 --- --- I2C-Hinge C-Die
5 --- --- I2C-Hinge C-Object
6 --- --- I2C-Charger D-Die
7 --- --- I2C-Charger D-Object
8 --- --- ECInternal
9 --- --- PECI
AP seen mask: 0x00000005
>
Read the EC_ACPI_MEM_TEMP_ID register from the host, to get the two active
sensor IDs (0 and 2), then 0xff when those are seen.
# iotools io_write8 0x66 0x80; iotools io_write8 0x62 5; iotools io_read8 0x62
0x00
# iotools io_write8 0x66 0x80; iotools io_write8 0x62 5; iotools io_read8 0x62
0x02
# iotools io_write8 0x66 0x80; iotools io_write8 0x62 5; iotools io_read8 0x62
0xff
# iotools io_write8 0x66 0x80; iotools io_write8 0x62 5; iotools io_read8 0x62
0xff
#
Change-Id: I8f047a517357617f18ad59d21fa13409bc81821b
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180224
Reviewed-by: Randall Spangler <rspangler@chromium.org>
SOC_OVERRIDE now drives a FET, so the signal is inverted (high=active,
not low). EC must drive it push-pull because there is no
pullup/pulldown on the input to the FET.
BUG=chrome-os-partner:24118
BRANCH=none
TEST='gpioget' shows signal is 0 by default, not 1.
Change-Id: I8a86587c7fad8bf5a583cd3976bd6ed3069f2975
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180287
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Proto 2.0 makes these changes:
KBD_IRQ# moves from PM4 to PM3.
EC_PWROK moves from PH2 to PJ1.
Since PM3 and PJ1 are unused on proto 1.5, it's harmless to duplicate
the current functionality on those outputs. We can remove the old
outputs when we deprecate the 1.5 boards.
BUG=chrome-os-partner:24424
BRANCH=none
TEST=boot rambi
Change-Id: Iff77651ef575a8405878fe75f025a0507b02b771
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180081
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This renames constants used in compiler conditionals to uppercase.
BOARD_foo
CHIP_foo
CHIP_FAMILY_foo
CHIP_VARIANT_foo
CORE_foo
Mixed-case constants are still defined by the makefile, but are now no
longer used. I will make one more pass in a week or so to catch any
that are part of someone else's CL, since otherwise this change might
silently merge correctly but result in incorrect compilation. Then I
will remove defining the mixed-case constants.
BUG=chromium:322144
BRANCH=none
TEST=Build all boards. Also, "git grep 'BOARD_[a-z]'" should return no
results (similarly for CHIP, CORE, etc.)
Change-Id: I6418412e9f7ec604a35c2d426d12475dd83e7076
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179206
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
This wires 0x62/0x66 to ACPI module and also implements the host event
functions.
BUG=chrome-os-partner:24107
TEST=ACPI memory test and compliment memory test.
TEST=Set SCI mask and host event to trigger SCI. Check SCI pin pulse
low.
TEST=Query host event from ACPI.
BRANCH=None
Change-Id: Ib1f557e995a861c92a603491229ad361e17d2129
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179942
Reviewed-by: Randall Spangler <rspangler@chromium.org>
New boards (rev >= 2.2) are not affected since chipset_force_shutdown()
is called. On old boards the power rails of old boards are not removed
completely. This CL ensures the AP is warm-reset after EC is reset.
BUG=None
BRANCH=nyan
TEST=nVidia verified on old boards.
Change-Id: Ia2c2b243534d8a73b9b4d5320aad4664b1ac8b12
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179521
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The macros must be defined prior to evaluating config.h, since
test_config.h needs them.
Also define an uppercase version of the PROJECT variable, so that we
define TEST_FOO in addition to TEST_foo.
BUG=chromium:322144
BRANCH=none (but might need it if you later cherry-pick something with
an uppercase #ifdef BOARD_FOO
TEST=Build each board with V=1 option: 'make V=1 BOARD=foo all tests'.
Check that the compile command line has both mixed-case and
uppercase defines. Check that per-board tests from test/build.mk
were built (for example, BOARD_PIT should compile kb_scan and
stress, and BOARD_SAMUS should build none of them).
Change-Id: I029552cfdf90a4191cf7a61cdcc65fe75d3ca86c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179902
Reviewed-by: Vic Yang <victoryang@chromium.org>
Any of the EC's temp sensors can have up to two independent thresholds
attached to them. When the temperature crosses the threshold (rising or
falling), a EC_HOST_EVENT_THERMAL_THRESHOLD event is sent to the AP. It's up
to the AP to read the sensor values and figure out why the event was sent.
The thresholds are set and enabled with ACPI writes to three registers in
the EC interface space: EC_ACPI_MEM_TEMP_ID, EC_ACPI_MEM_TEMP_THRESHOLD, and
EC_ACPI_MEM_TEMP_COMMIT. Refer to the comments in ec_commands.h for details
on their use.
ACPI does not provide any means to read the threshold settings (the AP will
just have to remember), but there is an EC console command "dptftemp", that
can be used to examine the current settings.
BUG=chrome-os-partner:23970
BRANCH=none
TEST=manual
On the EC console, check the current threshold settings and temperatures:
> dptftemp
sensor thresh0 thresh1
0 --- --- PECI
1 --- --- ECInternal
2 --- --- I2C-Charger-Die
3 --- --- I2C-Charger-Object
4 --- --- I2C-CPU-Die
5 --- --- I2C-CPU-Object
6 --- --- I2C-Left C-Die
7 --- --- I2C-Left C-Object
8 --- --- I2C-Right C-Die
9 --- --- I2C-Right C-Object
10 --- --- I2C-Right D-Die
11 --- --- I2C-Right D-Object
12 --- --- I2C-Left D-Die
13 --- --- I2C-Left D-Object
>
> temps
PECI : 318 K = 45 C
ECInternal : 306 K = 33 C
I2C-Charger-Die : 309 K = 36 C
I2C-Charger-Object : Not calibrated
I2C-CPU-Die : 309 K = 36 C
I2C-CPU-Object : Not calibrated
I2C-Left C-Die : 306 K = 33 C
I2C-Left C-Object : Not calibrated
I2C-Right C-Die : 307 K = 34 C
I2C-Right C-Object : Not calibrated
I2C-Right D-Die : 307 K = 34 C
I2C-Right D-Object : Not calibrated
I2C-Left D-Die : 306 K = 33 C
I2C-Left D-Object : Not calibrated
>
In this case, the PECI temp is 318 K, so let's set a threshold at 322 K. On
the AP:
[ "$#" -eq "2" ] || return;
iotools io_write8 0x66 0x81
iotools io_write8 0x62 $1
iotools io_write8 0x62 $2
}
Back on the EC console, we see that the threshold has been set:
[768.176648 DPTF sensor 0, threshold 49 C, index 1, enabled]
> dptftemp
sensor thresh0 thresh1
0 --- 322 PECI
1 --- --- ECInternal
2 --- --- I2C-Charger-Die
...
Now do something on the AP to increase the temperature (webgl aquarium,
etc). When the temp goes above 322 K, the EC console reports it and sends a
host event, and the "dptftemp" command indicates the over-temp condition:
[815.367442 DPTF over threshold [0][1]
[815.367878 event set 0x00000100]
[815.368069 sci 0x00000100]
[815.368619 event clear 0x00000100]
> dptftemp
sensor thresh0 thresh1
0 --- 322* PECI
1 --- --- ECInternal
2 --- --- I2C-Charger-Die
...
Log out and wait for the temp to drop. You'll see that trigger a host event
as well:
[854.375713 DPTF under threshold [0][1]
[854.376147 event set 0x00000100]
[[854.376396 event clear 0x00000100]
> dptftemp
sensor thresh0 thresh1
0 --- 322 PECI
1 --- --- ECInternal
2 --- --- I2C-Charger-Die
...
Change-Id: I6bb34c615f37477ccf37163caaa94737baed8dae
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179962
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Since some folks are still using old boards (rev <= 2.0), bring this back
so that they can reset system gracefully.
BUG=None
BRANCH=nyan
TEST=tested on rev 2.0
reboot // EC and AP are rebooted
reset button on board // EC and AP are reset
power off // AP (rev 2.0) is expected NOT powered off.
power on
Change-Id: I35dbc5648b092c892dc06ce5676e1e68c695d477
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179851
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds keyboard scan module driver. Keyboard scan task is not enabled
yet as the LPC layer is not finished and thus i8042 protocol cannot be
enabled.
Since KSO00-KSO03 are used as JTAG, we use KSO04-KSO16 so as to preserve
JTAG functionality. Unfortunately we don't have enough KSO pins, so
trace debug port must be disabled, as done in this CL.
BUG=chrome-os-partner:24107
TEST=Set 'ksstate on'. Short KSI pins and KSO pins, and see
corresponding key shown as pressed.
TEST=Check keypress is detected when console shows 'KB wait'.
BRANCH=None
Change-Id: I366a27453ef95030d251e525313eb4627eb4340f
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179319
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This adds three new registers to the ACPI->EC interface, which will allow
the AP to set/clear two DPTF thermal threshold points for each temp sensor.
The registers are
EC_ACPI_MEM_TEMP_ID 0x05
EC_ACPI_MEM_TEMP_THRESHOLD 0x06
EC_ACPI_MEM_TEMP_COMMIT 0x07
It doesn't actually do anything yet, but the AP can now write those values.
BUG=chrome-os-partner:23970
BRANCH=none
TEST=manual
On the host:
dptf() {
[ "$#" -eq "2" ] || return;
iotools io_write8 0x66 0x81
iotools io_write8 0x62 $1
iotools io_write8 0x62 $2
}
Now watch the EC console while running on the host:
dptf 5 1
dptf 6 80
dptf 7 2
dptf 7 3
The EC should say
DPTF sensor 1, threshold 7 C, index 0, enabled
DPTF sensor 1, threshold 7 C, index 1, enabled
Change-Id: I71fa57e3ca7c7b5bb8892e63212bf294b44dece5
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179778
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
BUG=chrome-os-partner:24455
BRANCH=none
TEST=Manual: Verify that CONIFG_PECI_TJMAX set per-board matches
the value queried over the PECI bus with the restricted
"peciprobe" command.
Change-Id: I8e99a23a66f26d6101e01cc751d0a8ca79686321
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179682
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Modified the commond timer module to expire timers as soon as time matches
the deadline instead of only after the deadline is passed.
BRANCH=none
BUG=chrome-os-partner:24490
TEST=On a peppy:
- Run EC tests on host.
- Run all EC tests on the target.
- Keep the system on for days and occasionally verify that system is up and the keyboard is working.
On a spring:
- Run all EC tests on the target.
Change-Id: Ieabfb769cf22ff8b04ca6d0a306312b90ea20ff3
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179460
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
On older boards (< Rev2.2), AP_RESET_L was connecting to PMIC reset pin.
However, after 2.2 we use the PMIC_THERM pin instead. Thus, change this
pin to pull high for old boards. T\Otherwise cannot boot up.
BUG=None
BRANCH=nyan
TEST=verified on old board by nvidia.
Change-Id: If4dccaf0bd0671c55b0d703d4d4b16a2b9c4f543
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179377
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This is the first step of tegra power state re-factoring. Move the
power button logic to common/power_button.c.
Also, the GPIO KB_PWR_ON_L is renamed to POWER_BUTTON_L.
BUG=None
BRANCH=nyan
TEST=tested on nyan rev 3.12,
reboot: PASS, power on 2
power off / power on: PASS, power on 5
lid close / power off / lid open: PASS, power on 3
button on / off: PASS, ending loop 3, power on 4
power off / button on: PASS, ending loop 4, power on 4
button off / power on: PASS, ending loop 3, power on 5
button off / lid open: PASS, ending loop 3, power on 3
Change-Id: If07806b9c11cdba2b478a9a74d2b75be1d9f7acf
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179451
Sometimes the toolchain tries to put a relocation which is not suitable
to access variables in a read-only section.
The nds32 gcc uses GP-relative signed 17-bit relocation to access
variables stored in .rodata (eg lwi.gp $r0, [ +gp ])
That's wrong since $gp is pointing in the middle of .data and .bss in
the SRAM, while .rodata is sitting in flash.
Since on IT8380, the flash is at 0x00000 and the SRAM is at 0x80000
(512kB further), the linker will fail trying to create the signed 17-bit
relocation (it detect that it needs to truncate it)
Force the compiler to put another relocation as a workaround for now.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:24378
TEST=./util/make_all.sh ; make BOARD=it8380dev
check "version" and "gpioget" on spring, link and it8380dev.
Change-Id: Ife50adf3a26be28f113292f73a1a70e8d74b5d8c
Reviewed-on: https://chromium-review.googlesource.com/176913
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
When we are detecting Apple charger type, we disable TSU6721 interrupt.
This, however, doesn't create a race condition, because any pending
interrupt fires immediately after we re-enable TSU6721 interrupt, and in
turns schedules charger task. As a result, charger task gets waken right
after it finishes its current iteration.
As for overcurrent detection, the current algorithm seems to do a good
enough job.
BUG=chrome-os-partner:23743, chrome-os-partner:23744
TEST=None
BRANCH=None
Change-Id: Ib3a6d562a305020ef5413e2a493e4163a6e70954
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179303
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The "kbpress" command had a few issues if you wanted to reliably use
it for automation. Specifically it was not possible to guarantee how
much time would pass between the press of a key and the release of a
key. Sometimes you might press and release before the key was
officially "there" and sometimes you might get a press and hold of a
key.
Fix this:
1. Make it so that kbpress with no press/release parameter gives a
press and release (and guarantees that the press / release will
actually take effect).
2. Make it so that kbpress guarantees that when it finishes that the
key has actually been pressed or released.
BRANCH=pit
BUG=chrome-os-partner:24249
TEST=kbtype is (https://chromium-review.googlesource.com/178680) reliable
TEST=make -j32 BOARD=bds tests && make BOARD=bds runtests
TEST=Pick Ibe00a796bde7d06416889b621359671a2f68e162 and test.
Change-Id: Ia213ab2e8d8da273e3ac4876d97d5452df88f47d
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178983
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 247650ecc90385417f5dcb2d60bb6ae1e5cfa32f)
Reviewed-on: https://chromium-review.googlesource.com/179325
Reviewed-by: Randall Spangler <rspangler@chromium.org>
It worked on Link because the fan number and the fan channel were both 0.
Samus has two fans, connected to different GPIOs.
In the EC's ACPI interface block, register 0x04 is used to get and set the
fan's target duty cycle, as a percentage value. Writing a 0 to this register
will set the target duty cycle to 0, writing a 100 (0x64) will set it to
100%. Writing any other value will return the fan control to the EC, rather
than driving it manually from the host.
Likewise, reading from this register returns the current fan target duty
cycle, as a percentage. If the EC is controlling the fan automatically, the
returned value will be 0xFF.
BUG=chrome-os-partner:23972
BRANCH=samus
TEST=manual
You can monitor the fan state from the EC console with the "faninfo"
command. From the host side, test this interface from a root shell.
Read fan duty:
iotools io_write8 0x66 0x80
iotools io_write8 0x62 4
iotools io_read8 0x62
Set fan duty to 100%:
iotools io_write8 0x66 0x81
iotools io_write8 0x62 4
iotools io_write8 0x62 100
Set fan duty to 50%:
iotools io_write8 0x66 0x81
iotools io_write8 0x62 4
iotools io_write8 0x62 50
Set fan duty to 0%:
iotools io_write8 0x66 0x81
iotools io_write8 0x62 4
iotools io_write8 0x62 0
Set fan control back to automatic:
iotools io_write8 0x66 0x81
iotools io_write8 0x62 4
iotools io_write8 0x62 -1
Change-Id: I3a133b0b16e2a5e1ce04b16cb2bf035a04a83daf
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179373
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This fixes a rare problem in which the EC could shutdown due to
a false over-temperature when entering S0 on Haswell architectures.
The fix involves requiring two valid reads of the temperature
sensor (out of the last 4 readings) in order to report it.
BUG=chrome-os-partner:24204
BRANCH=none
TEST=See bug report for a patch that recreates the bug at a
significantly higher rate then it would occur on its own. Using
that patch, I implemented this fix, and made sure that there
were no false over-temperatures reported.
Change-Id: I0454eca1b96fd2fa1833b080026ed8f1caeeddc4
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177963
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Currently, per-board defines use mixed case (BOARD_pit). This causes
the presubmit script to complain because that's a style violation.
Using --no-verify to bypass that also allows other style violations to
creep in.
This change adds uppercase variants (BOARD_PIT). It also adds a CORE_
define with '-' changed to '_', since CORE_cortex-m isn't a valid
symbol but CORE_CORTEX_M is (so now we can #ifdef CORE_CORTEX_M).
This does not remove the old mixed-case defines yet, nor does it
find/replace them in the C source files. This is intentional, so this
change can be cherry-picked into branches without needing to change
files in the branch that may have picked up new #ifdefs.
I will rename the constants in the C source files and remove the old
mixed-case defines in a follow-on CL, which should not need to get
picked into existing branches.
BUG=chromium:322144
BRANCH=none (but might need it if you later cherry-pick something with
an uppercase #ifdef BOARD_FOO
TEST=Build each board with V=1 option: 'make V=1 BOARD=foo all tests'.
Check that the compile command line has both mixed-case and
uppercase defines. Check that per-board tests from test/build.mk
were built (for example, BOARD_PIT should compile kb_scan and
stress, and BOARD_SAMUS should build none of them).
Change-Id: I5eb0d1fe57f1c694d7449e5f148e2f13fb290a39
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179205
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
BUG=None
BRANCH=None
TEST=Manual. Run the following console commands:
g781 - verify temps and status look sane.
temps - verify local and remote values for the 781 are listed
g781 settemp 0x05 80 - verify local high alarm set to 80C
g781 setbyte 0x09 0x80 - verify config register is 1000 0000
Change-Id: Ia437647fd052295dfd8901c2ef241ff69c0d950e
Signed-off-by: Dave Parker <dparker@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179152
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The samus lightbar uses different LEDs from Link. Adjust the per-color
current limits accordingly. Also swizzle the layout, since LEDs 0/1 and 2/3
are swapped.
BUG=chrome-os-partner:24405
BRANCH=samus
TEST=manual
The colors were ugly and weird. Now they should be pretty and Googley.
Change-Id: I19f317243ff46852628b8b28f2bf6f5e02c6e631
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179160
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This allows local and remote temp values to be added
to a board's list of temp sensors. It also adds a
'tmp432' EC console command to query temps
and set alert thresholds. Fractional degrees are not
supported. DPTF support is not addressed.
BUG=chrome-os-partner:23985
BRANCH=none
TEST=Add tmp432 support to a board with the sensor
then run the 'tmp432' and 'temps' EC console commands.
Signed-off-by: Dave Parker <dparker@chromium.org>
Change-Id: Ifee47cf4d4cf5eedef9ef2bfa2149f183f1d7a7b
Reviewed-on: https://chromium-review.googlesource.com/178688
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Dave Parker <dparker@chromium.org>
Tested-by: Dave Parker <dparker@chromium.org>
This adds the driver for MEC1322 I2C controller.
BUG=chrome-os-partner:24107
TEST=Hook up TSU6721 to eval board. Do the following tests:
- 'i2cscan' and see TSU6721.
- Read device ID register and get correct value.
- Add 3 tasks randomly doing I2C read and writes. Check there is
no error.
BRANCH=None
Change-Id: I465f73fe8177a8df6b56c57e594cd733caea37d4
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178591
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Move the non-core dependent code out of core/$(CORE) directory to
common/ directory.
Put all panic printing code in common/panic_output.c
Put timer management code in common/timer.c
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=chrome-os-partner:23574
TEST=./util/make_all.sh
use "crash divzero" and "panicinfo" on Link.
Change-Id: Ia4e1ebc74cd53da55fe24f69e96f39f512b9336d
Reviewed-on: https://chromium-review.googlesource.com/178871
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Jeremy Thorpe <jeremyt@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Remove jumped_to_image check in system_run_image_copy because it's redundant.
disable_jump will be set by VbExEcDisableJump explicitly, whether the EC stays
in RO or jumps to RW.
TEST=Built and booted Peppy. Ran flashrom from user space and verified
the EC firmware was updated after reboot.
BRANCH=none
BUG=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: If1a3cf6158b3bc97c965298d2ab958b5fa7a5d7e
Reviewed-on: https://chromium-review.googlesource.com/172651
Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Tested-by: Daisuke Nojiri <dnojiri@google.com>
Add a new pin PMIC_THERM_L (PA1) since AP_RESET_L (PA15) is removed.
To force shutdown, drive PMIC_THERM_L to low (default high) for 32us.
Also rename set_pmic_pwrok() -> set_pmic_pwron(). And add a debounce time
for PMIC_PWRON_L pin.
BUG=chrome-os-partner:24206
BRANCH=nyan
TEST=Verified on the frank's rework board.
'power off' shutdowns the AP immediately.
'reboot' reboots the EC and resets the AP as well.
'sysjump RW' still keeps AP alive.
Change-Id: I8643e19081a824e1f6adc812dfad0269222db8ea
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178631
This adds the driver for PWM duty cycle based and RPM based fan control.
BUG=chrome-os-partner:24107
TEST='fanset 5000' and fan spins up.
'fanset 8000' and fan spins faster.
'fanset 0' and fan stops.
'fanduty 30' and fan spins up.
'fanduty 50' and fan spins faster.
'fanduty 30' and fan slows down.
'fanset 6000' and fan goes to ~6000 RPM.
Unplug fan power and see 'fan 0 stalled'.
Plug power back and doesn't see stall warning anymore.
BRANCH=None
Change-Id: Ice3e5c03686cde57894e888e34ae2070c33b4e4d
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178402
We are using EMI module instead of LPC memory transaction. This requires
a different protocol for accessing mapped memory from host. For easier
development, let's add a new comm-mec1322.c until we can switch back to
LPC memory transaction.
BUG=chrome-os-partner:24280
TEST=ectool version
TEST=util/make_all.sh
BRANCH=None
Change-Id: Id8914d0413561991d3e46bef7e3fe76c4f8b83e4
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178251
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
With this, basic host command functionality is working.
We don't have the correct description of LPC memory BAR register yet, so
we have to use EMI (embedded memory interface) module for 0x800-0x9ff
region. This requires a slightly different protocol, which is in the
next CL.
BUG=chrome-os-partner:24107
TEST=Wire EVB to Stumpy. 'ectool hello' and 'ectool version' working.
BRANCH=None
Change-Id: I873b4a455cf692e479321a5c6e18c8f33df60e66
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178250
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Nyan EC supports 2 different boards: Venice2 and Norrin. Venice2
uses 2S battery, and Norrin uses 3S battery. This CL is to support
2 different battery types (2S or 3S) automatically at init time by
reading battery's MANUF_NAME, DEVICE_NAME and DESIGN_VOLTAGE from
Smart Battery Interface to determine which battery type to use.
To workaround the problem that battery may not be attached at init
time, a patch is added to call battery_get_info() in PWR_STATE_INIT
state to get the current battery info. Note the battery info is only
determined once.
BUG=none
BRANCH=nyan
TEST=tested on Vencie2 with 2S battery and on Norrin with 3S battery
attached at init time and made sure correct battery info are
installed;
tested on Venice2 and Norrin without battery at init time, then
attached 2S or 3S battery and made sure correct battery info are
installed.
Change-Id: I135909c7fe1e1dfdb0f706e0eadba6e904b6221e
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: https://chromium-review.googlesource.com/178088
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This allows boards to detect the battery and return the correct temp
ranges, which will be needed for upcoming boards.
In the board-specific implementations, it's pretty much just moving
the fields from one const struct to another, so the impact is minor.
BUG=chrome-os-partner:24310
BRANCH=none
TEST=build all platforms; verify pit and rambi still charge
Change-Id: I7be075b3abb4039577f6362316adc1860c121d5c
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178424
Reviewed-by: Yung-chieh Lo <yjlou@chromium.org>
Reviewed-by: Rong Chang <rongchang@chromium.org>
Due to the way wireless_enable works this was resulting in
WLAN_OFF_L going low briefly on S0->S3->S0 transitions.
BUG=chrome-os-partner:23752
BRANCH=none
TEST=emerge-samus chromeos-coreboot-samus
Change-Id: I4bb02b6e9acf97d501af8c40c455c9f88ffe35ee
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178422
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Smart batteries can report capacity in mAh or 10mW units. We forced
the units to mAh in charge_state.c's main loop, but that doesn't
guarantee that they're actually set before the capacity is read. It's
cleaner to check the capacity reporting mode when actually reading the
capacity.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=battery command reports the same capacity data before/after change
(on rambi, design=2940 mAh)
Change-Id: I4a4c80eaade72bb09627d5d65693c097e264a992
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176154
The charge state machine asks for all of this stuff at the same time
anyway. Bundling it into a single function removes a number of
redundant (and painfully slow) I2C reads.
Also refactor the battery debug command so it doesn't have so many
local variables all in one function; it was consuming considerably
more stack space than any other debug command.
Spring still needs low-level access to the smart battery, so move the
two functions it needs directly into the Spring implementation.
BUG=chrome-os-partner:20881
BRANCH=none
TEST=charge/discharge rambi, pit and spring; watch debug messages and
LED and output of 'battery' debug command. All should behave the
same as before. Then run 'taskinfo' and see that the console task
has at least 20 bytes unused.
Change-Id: I951b569542e28bbbb58853d62b57b0aaaf183e3f
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177797
BSS section is usually put at the beginning of the RAM, so large
alignemnt causes the least memory usage penalty here, compared to
alignment using __attribute__((aligned(x))).
Also remove .bss.tasks and .bss.task_scratchpad, which are both not
present anymore.
BUG=chrome-os-partner:24107
TEST=Build all boards. Boot mec1322_evb.
BRANCH=None
Change-Id: Ie19b9feb76773a94f0443c2a0d39505ddef7a1df
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178274
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
If CONFIG_WATCHDOG_HELP is defined, a 16-bit timer is used as an
auxiliary timer to interrupt us 50ms before the watchdog expires. When
the auxiliary timer expires, the stack trace is printed. Watchdog then
expires 50ms after and reboots the system.
BUG=chrome-os-partner:24107
TEST=Define CONFIG_WATCHDOG_HELP, and see stack trace on 'waitms 2000'.
TEST=Undefine CONFIG_WATCHDOG_HELP, and check watchdog still works
without printing stack trace.
BRANCH=None
Change-Id: I2555d3f86a15c83bb03a00c6807f77d9dddaf333
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178284
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This adds a PWM driver, which now generates 30KHz PWM output. Note that
this is different from fan control module driver.
BUG=chrome-os-partner:24107
TEST=Set GPIO136 to PWM1. Attach logic analyzer to monitor its output.
- Set to active high and 30%, see 30% duty PWM at ~29.1KHz.
- Set to active low and 20%, see 80% duty PWM at ~29.1KHz.
BRANCH=None
Change-Id: I5f1001d5a4701e19fa87c4cabfd4ae5ae7ccb30c
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178391
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
So far we can only reliably sense a watchdog reset, but this
saving/checking reset cause will at least make 'ap-off' flag work.
BUG=chrome-os-partner:24107
TEST='waitms 2000' and see reset cause = 'watchdog'
TEST='reboot ap-off' and see reset cause includes 'ap-off'
TEST='reboot preserve' and see previous reset cause is preserved.
BRANCH=None
Change-Id: Id47a72d615489c9d9cd0b8761cfa699f08c724df
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178277
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This will be used for saving data across reboots.
BUG=chrome-os-partner:24107
TEST=Enable scratchpad command and check value is preserved across
watchdog reboot.
BRANCH=None
Change-Id: Ifd68541a3f842c466b6ff49bcc654c92df48aac6
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178276
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
DUMMY() is ugly and DUMMY_int() makes repo complain. Replace them with
explicit functions.
BUG=chrome-os-partner:24107
TEST=Build mec1322_evb
BRANCH=None
Change-Id: I155b769c12cafaf432c7f53fd46806feada3cfca
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178275
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
iRESET_OUT must be deasserted before the host can boot, and it's also
the gating source of the internal nSIO_RESET signal. There is a delay
between deasserting iRESET_OUT and nSIO_RESET inactivated, so let's
deassert iRESET_OUT as early as possible.
BUG=chrome-os-partner:24107
TEST=Boot EVB and check iRESET_OUT value
BRANCH=None
Change-Id: I6647da00567e2651c2b49e1e767adee2d5276493
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178171
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
With this, we can now define and trigger interrupt on GPIO status.
BUG=chrome-os-partner:24107
TEST=Test GPIO036 with following cases:
- Pulled up and rising edge trigger. Pull down externally and
then release.
- Pulled up and falling edge trigger. Pull down externally.
- Pulled up and both edge trigger. Pull down and then release.
- Pulled up and low level trigger. Pull down externally.
BRANCH=None
Change-Id: Id9bfd2ba9dd8a75bcf2c5691ffe2aa6518076925
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177560
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This script is needed for packing EC binary into SPI flash for MEC1322.
This includes adding tag and header at appropriate location and signing
the image. Signing key, for obvious reason, is not included here until
we are sure what key we want to check in.
BUG=chrome-os-partner:24107
TEST=Build and boot on eval board
BRANCH=None
Change-Id: I92db7d2ba2c76c14a9c6611a04dbd6a2c3eb8d83
Signed-off-by: Vic (Chun-Ju) Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177324
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
