Remove the meaningless version string in iSerialNumber, which was incorrect
since this string should be unique to a device if it exists.
Export the firmware version string as the configuration string, so it's
traceable to a given firmware build/sources.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=none
TEST=make buildall
from a workstation, do "sudo lsusb -v" and see the full version string
exported as the configuration name.
Change-Id: I557df2936421e2926ac0fc0003888370cec3e201
Reviewed-on: https://chromium-review.googlesource.com/222877
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Change effects:
1. samus_pd: Acts as initiator of SVDM discovery once its reaches source
ready and upon identifying UFP with display port
alternate mode enters that mode.
2. hoho: Acts as responder for SVDM discovery providing its identity,
svids and svid capabilities which are display port only. If
asked to enter display port alternate mode it does.
3. fruitpie: Acts a initiator with mock display port mode.
BRANCH=none
BUG=chrome-os-partner:30645
TEST=manual,
Plug hoho into samus_pd
- see dpout
- from console
> typec 0
Port C0: CC1 451 mV CC2 111 mV (polarity:CC1)
Superspeed DP1
Change-Id: I1a76767353a69baeceffa3e79c37dcea77b8337d
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221354
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The BOS (Binary Device Object Store) descriptor was added to the USB
specification (3.0) to allow a richer set of device capability
specific descriptors.
The Billboard class is meant to expose (read-only) the status of USB
devices capable of alternate mode functions. It's required to use the
BOS descriptor type and at a high level looks like:
- BOS Device Descriptor (5bytes)
- Container ID Device Capability Descriptor (20bytes)
- Billboard Device Capability Descriptor (44byte + 4 * numSVIDs)
This CL adds:
1. Ability for Get Descriptor on BOS descriptors. Note hidden behind
CONFIG_USB_BOS as these descriptors change USB device requirements
to:
- bcdUSB >= 0201
- no interface descriptors
2. structures for all BOS, Container & Billboard descriptor elements
complete w/ CamelCase.
BRANCH=none
BUG=chrome-os-partner:32652
TEST=compiles with CONFIG_USB & CONFIG_USB_BOS enabled.
Change-Id: I1b24bc728f2ebba7d91840801d2ebe576e240e7c
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221570
Some platforms may need to take different actions depending on which
port is requesting a limit. Add a new port parameter to the
pd_set_input_current_limit API to accomodate this.
BUG=chrome-os-partner:32003
TEST=Manual on samus_pd. Verify zinger charges battery.
BRANCH=samus
Change-Id: I1578252c751b3a80b4da6ca68e2a958934283cbf
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222621
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This prepends EC_ a macro exposed in ec_commands.h, moves a
macro into lbcc that is not used elsewhere, and changes lb_program
structs to lightbar_program.
BUG=None
BRANCH=ToT
TEST=make buildall -j
Change-Id: I481562da72d91f846c64cf9af40338027641462c
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222406
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Add support for enabling USB type-C Vconn by defining CONFIG_USBC_VCONN.
Enable Vconn support for samus, ryu, and fruitpie.
BUG=chrome-os-partner:30445
BRANCH=samus
TEST=make buildall
Change-Id: Ibe247286c96fd5a8fa12c88a4e3a5fea02997134
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222284
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The PD protocol no longer uses a SHA1 RW hash. Instead, it uses the
first 20 bytes of the SHA-256 hash. Update constants and comments
accordingly.
BUG=chrome-os-partner:31361
TEST='make buildall -j'
BRANCH=samus
Change-Id: Ice74b841dbd1d81205c1ef0079a5e18fca2153b6
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/222446
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Design Goals:
1. Every time the AP boots, the same default sensor settings are configured.
2. If the AP goes to suspend (S3) and wakes back up (S0),
then the AP sensor settings will be restored.
3. In S3 and in S5, only sample specific sensors that are needed.
BUG=chrome-os-partner:32368
BRANCH=ToT
TEST=Verified on Samus.
Verified suspend and resume logic with EC console messages.
- Test Case0: close lid & open lid
- Test Case1: powerd_dbus_suspend
Change-Id: I553c53e63ecfcb39d5e649a7189aa6ea02589471
Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220371
Reviewed-by: Alec Berg <alecaberg@chromium.org>
PULSE and TEST sequences are not used anywhere. Remove them to save
flash space. Also, fix msleep(MSEC) calls in the unit test; it's
essentially usleep(SECOND) written in an incorrect way.
BUG=chrome-os-partner:32203
TEST=make buildall
BRANCH=None
Change-Id: I61ba897df632538eb89364a4c913d5fee87f3864
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220711
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
ectool autofanctrl 1 - set auto fan control for fan 1
BUG=chrome-os-partner:23803
TEST=Tested the above EC command on Auron
BRANCH=none
Change-Id: Idcd3690ad98d7965420f26f7cc445207fe73704d
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221816
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Add a minor revision to the PD device hardware ID field in the info
custom VDM and set increment this minor ID from 0 to 1 for zinger.
This differentiates zingers for the auto-update payload, so we can
update only those with a specific major and minor ID version.
BUG=none
BRANCH=samus
TEST=load onto samus and zinger. when connect zinger, see on PD
console: Dev:0x0401 SW:2289 RW:0, which shows the appropriate
device ID.
Change-Id: I482ee2d850332b608cdd81537f68d4dc509bfc1a
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221320
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Changed sending of info VDM from the UFP side in SNK_DISCONNECTED
to the DFP side in SRC_READY to match the PD spec. Only the DFP
is supposed to send VDMs, and by default the power source is the
DFP. This affects simple DFPs such as power adapters, they must
initiate the info VDM once a power contract has been negotiated.
BUG=none
BRANCH=samus
TEST=load onto samus_pd and zinger and make sure that when you
attached zinger to samus, samus receives info VDM and prints out
something like:
VDM/7 [11] 18d1000b
Dev:1 SW:2280 RW:0
Change-Id: I16ceac31939fdc1c74be7323e628dd8706e1283b
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221174
Reviewed-by: Todd Broch <tbroch@chromium.org>
This is mostly the same as previous commits, but with increased delay.
Previously, we have short delays (e.g. 3ms) which is too short and may
cause instability.
Now that we have slowed down the time when running unit tests and
increased the delay, this shouldn't cause problems anymore.
BUG=chrome-os-partner:31200
TEST=Repeatedly run multiple unit tests in parallel.
BRANCH=Samus
Change-Id: Ib55e3adc5fd27a8e233996b4799dab3cefd62318
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220734
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
First case is for legacy support
ectool pwmsetfanrpm <targetrpm> - set all fans to <targetrpm>
ectool pwmsetfanrpm <fan> <targetrpm> - set <fan> to <targetrpm>
BUG=chrome-os-partner:23803
TEST=Tested the above EC commands on Auron
BRANCH=none
CQ-DEPEND=CL:220960
Change-Id: I8f447f53289abaa9c5cc1285f9f0921328fbf32c
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/221291
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Automatically go into hibernate (standby mode) if not powering
anything for 60 seconds. Will wake up when it is plugged into
something (senses pull-down on CC line).
BUG=chrome-os-partner:28335
BRANCH=samus
TEST=load onto zinger. if disconnected for 60s, see hibernate
print on zinger console. when connected to a device, verified
it boots again.
Change-Id: I2564c6192395bb5e4f6d7586c2725f13a4581049
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220837
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The Zinger RW is now signed with 2048-bit RSA key (using SHA-256 as
digest).
This CL implements the verification mechanism.
note: the RSA key used for signing must be provided as a .pem file.
The path to .pem file must be provided in the PEM environment variable.
By default, it's using the dev key stored in zinger_dev_key.pem.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28336
TEST=on Zinger, run with properly signed RW firmware and corrupted
firmware and check the serial traces.
Change-Id: Ia58482458904a3ed72d6b0e95996cae86a0ead83
Reviewed-on: https://chromium-review.googlesource.com/220178
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Minimuffin is identical to zinger, same MCU, same gpio, same
circuitry aroundt the MCU with two differences:
- Rated current is 2.25A instead of 3A
- USB PD hardware device ID needs to be different so that host
can differentiate between the two.
Due to the similarity between the two, minimuffin is defined
as a symlink to the zinger board.
BUG=none
BRANCH=samus
TEST=make BOARD=minimuffin
load onto a zinger and verify that samus reads device ID correctly
and limits input current limit to 2.25mA.
Change-Id: Ie39ec43262c7d14663eb68abff073bfeec451a24
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220689
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Enabled deep sleeping during S0. This was previously inhibited by
SLEEP_MASK_AP_RUN but the new config option (CONFIG_LOW_POWER_S0) will ignore it.
SPI needed a sleep mask, it essentially gets enabled and disabled whenever the
CS changes. Warning: waking up when the CS falls takes a little time, if the AP
sends fast data before the 48MHz clock is enabled characters will get corrupted;
leave about 30uS time for the clock to start.
CQ-DEPEND=CL:219997
CQ-DEPEND=CL:220243
CQ-DEPEND=CL:220461
BUG=chrome-os-partner:32223
BRANCH=none
TEST=load onto pinky, boot the AP(S0), use idlestats command to verify
that we are going into deep sleep (STOP mode). Verify that everything works
normally during S0(SPI, keyboard, anything that requires the EC to wakeup).
Change-Id: I81c4fa472332f1ad8ad93301089a99dcdb108948
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219555
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Currently, when an assertion fails, the error message is like:
ASSERTION FAILURE '1 + 1 == 3' in command_apreset() at common/chipset.c:24
To save flash space, let's add an option to remove the failed
expression and function name. The error message becomes:
ASSERTION FAILURE at common/chipset.c:24
BUG=chrome-os-partner:32203
TEST=make buildall
TEST=Add an assertion and triggers it. Check error message.
BRANCH=None
Change-Id: Ie323d5b43cbff2cd8f6cd5bb46c1f34ecd16bd5e
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219670
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This removes the special casing around HALT. It saves us a string
literal and some logic. In total, we gain about 50 bytes and a
little cleanup for this.
BUG=None
BRANCH=ToT
TEST=Tried a program that uses HALT (i.e. red-green-blink) in
simulator and on hardware.
Change-Id: Iffee1b559983fd1ecd385cc6b8967f72a6b968a0
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220589
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
2048-bit RSA public key cryptography signature verification code
which uses a pre-processed key for computation.
it is based on the code from vboot :
platform/vboot_reference/firmware/2lib/2rsa.c
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:28336
TEST=using following CL, on Zinger, verify RW firmware signature.
Change-Id: I681a29144eb805cd5758aa6efe697ce2f656a298
Reviewed-on: https://chromium-review.googlesource.com/220186
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Commit-Queue: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
BUG=none
BRANCH=ToT
TEST=manual
make BOARD=samus
for i in extra/lightbar/programs/[g-z]*.bin; do
./build/samus/util/lbcc -d $i /tmp/x.lbs
./build/samus/util/lbcc /tmp/x.lbs /tmp/x.bin
cmp $i /tmp/x.bin
done
Change-Id: I86c014c425e917ecafadd1c6845fcf2e5b4edbb7
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220244
If there is any delay between AC status and the battery charge status
it is possible for the power_manager to read the battery state when
the AC status event is sent and still see that the battery is not
yet charging. This can cause lag in the UI battery icon because the
AP is not notified when the battery charge state changes.
In order for the host to be able to differentiate the dynamic battery
state changing (re-read ACPI _BST by sending Notify 0x80) from the
static battery info (re-read ACPI _BIX/_BIF by sending Notify 0x81)
it needs a separate host event.
BUG=chrome-os-partner:32196
BRANCH=samus
TEST=Test AC instertion and removal while watching state on the host
to ensure that an event is sent to the host which triggers power
manager to re-read the battery status and notice that the charge
state has changed if there is any delay after the AC status event:
watch -n 0.1 "cat /sys/class/power_supply/AC/online;
cat /sys/class/power_supply/BAT0/status;
tail -10 /var/log/power_manager/powerd.LATEST"
Change-Id: I18ce70719dc231c43c474cefad2068f949675a2b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220257
Reviewed-by: Alec Berg <alecaberg@chromium.org>
BUG=chrome-os-partner:29041
BRANCH=ToT
TEST=manual
From the host run
ectool lightbar demo on
Then press the 'T' key. The lightbar should change to indicate
the charge state. Fiddle with the arrows to change the pretend
battery level and AC presence.
Change-Id: I398a829e2e5de5e1a186500aa2ed72c61e71deaa
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/220024
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This diff allows the user to send small programs to the EC and
gain control of the lightbar. Right now, this is only exposed
through ectool, and sysfs support will come later.
To send a program to the EC, use
$ ectool lightbar program /path/to/program.bin
and then start running the program with
$ ectool lightbar seq program
BUG=None
BRANCH=ToT
TEST=Using the above steps with hand-assembled programs.
Checked that infinite bytecode loops do not hang the EC.
Checked that bad opcodes exit with an error.
Stress tested pushing programs and changing sequences.
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Change-Id: I635fb041a5dc5c403f7c26fb9a41b5563be9b6b7
Reviewed-on: https://chromium-review.googlesource.com/219558
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This code is used to find the orientation of the sensor.
Given sensor are aligned with the edges of the device,
it is not too dificult to find manually.
BRANCH=ToT
BUG=None
TEST=Check ACCEL_CALIBRATE is not used anymore.
Check 'make buildall -j' works.
Change-Id: I81ffcb4f6b01c530ef16baf13113a5942f615092
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219527
Reviewed-by: Alec Berg <alecaberg@chromium.org>
'powerindebug' is only used when there is a problem with power
sequencing. 'taskready' is rarely used and the same info can be
retrieved by 'taskinfo'.
Put both behind config flags and disable 'taskready' by default. Also
disable 'powerindebug' for Ryu.
BUG=chrome-os-partner:32203
TEST=Build Ryu and check flash space used.
BRANCH=None
Change-Id: I753a1f5411d6e840a80aba03afc94f9640d381a8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/219490
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Enable low power idle for samus_pd. Low power idle is only
entered when no USB PD device is connected.
BUG=chrome-os-partner:31226
BRANCH=none
TEST=load onto samus_pd, use idlestats command to verify
that we are going into deep sleep (STOP mode). Run 30 min.
and verify no watchdog reboots or anything out of ordinary.
Also, verify that host commands from EC work when going into
deep sleep by sending host commands on the EC console with
pdcmd 0 0.
Change-Id: I3e2e04e6c4c0a84e291286dbed90945847e0dfdd
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/218957
Reviewed-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This driver can be used to access multiple usarts using an abstract
stream interface. The stream interface can also be used in drivers
for the host interface and USB console interface, providing a
consistent API across all character stream style IO.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: Icf567f0b0fa4eb0e9ad4cdb0be8edc31c937a7de
Reviewed-on: https://chromium-review.googlesource.com/209671
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Previously there was no way to remove multiple units at a time
from the queue, and the queue was wasting an entry to disambiguate
full from empty. There was also no way to get the free entry
count from the queue, only the ability to query if it was above
a required amount. The queue was also storing its constant
compile time configuration as well as its dynamic state in the
same structure. This wasted RAM on configuration information
that doesn't change.
This refactor fixes these issues, making the queue suitable for
use in the new USART stream driver.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I284cee52d8189928dbc4c499f87ab34e14019e5a
Reviewed-on: https://chromium-review.googlesource.com/210533
Reviewed-by: Vic Yang <victoryang@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Commit-Queue: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Add three retries for EC to PD host commands. With this change,
removed retry mechanism in host_command_pd.c which was a retry
only for the specific EC_CMD_PD_EXCHANGE_STATUS host command.
BUG=chrome-os-partner:32006
BRANCH=none
TEST=Loaded EC code onto samus. Added the following code
for testing failed host commands to samus_pd common/host_command.c
host_command_task():
if ((evt & TASK_EVENT_CMD_PENDING) && pending_args) {
if (i++ != 4)
pending_args->result =
host_command_process(pending_args);
else {
pending_args->result = -7;
i = 0;
}
host_send_response(pending_args);
}
This test code on samus_pd drops one in every five host commands.
With this code, from the EC, I send "pdcmd 0 0", and verified that
1 out of 5 times the EC prints a host command failed code, but then
retries successfully.
Change-Id: Ibf43feefbfc7d791c45c6689b82c66f5d71046ab
Signed-off-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/217461
Reviewed-by: Todd Broch <tbroch@chromium.org>
CL provides some useful information similar to the EC console command
'pd state <port>' when host command 'usbpd <port>' is sent from host
with no additional arguments.
Also added a few build asserts for role & mux strings.
BRANCH=none
BUG=chrome-os-partner:31690
TEST=manual
ectool --interface=lpc --dev=1 usbpd 1
Port C1 is enabled. Role:SNK Polarity:CC1 State:6
# has zinger attached
ectool --interface=lpc --dev=1 usbpd 0
Port C0 is enabled. Role:SNK Polarity:CC1 State:2
Change-Id: Id44eb7bf6a6fcfa888a0008a2249601967c50bcc
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/217138
Reviewed-by: Alec Berg <alecaberg@chromium.org>
PD accessories that are RW update-able will broadcast their rw_hash
SHA1 digest upon connection to the PD MCU which will store it.
For update purposes, the host needs that accessories device id and
rw_hash to determine its proper firmware update payload.
This CL creates a host command that requests the type-C accessory info
attached to a particular port. It also implements an ectool command
to expose the host command.
BRANCH=none
BUG=chrome-os-partner:31361
TEST=manual,
# connect zinger to port 1 on samus
ectool --dev=1 --interface=lpc infopddev 1
Port:0 Device:1 Hash: 0x7f4d7a13 0xf07b65b9 0x41181e10 0xb99b3d5f 0x9dee1206
ectool --dev=1 --interface=lpc infopddev 0
Port:0 has no valid device
Also do the same on port 0 with similar results.
Change-Id: Id63c7edad77a43d43c14d8cd6bd96e08d0d9b501
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/216814
Reviewed-by: Alec Berg <alecaberg@chromium.org>
PD accessories that are RW update-able will broadcast their rw_hash
SHA1 digest upon connection and remain in RO briefly for a response.
In order to speed-up the response and decouple common case of
accessory is up-to-date, the PD MCU will keep a small 4 entry table of
PD accessory device ids and their corresponding RW hashes for quick
lookup.
The AP will be the source of new updates and their corresponding
device id's and RW hashes and therefore needs a method to update the
PD MCU table.
This CL creates the table, host command & ectool command to facilitate
future driver / daemon to update the RW hash entries.
BRANCH=none
BUG=chrome-os-partner:31361
TEST=manual,
# from AP
for i in `seq 1 8` ; do
ectool --dev=1 --interface=lpc rwhashpd $i $i $i $i $i $i
done
# from samus_pd console
pd rwhash
Device:5 Hash: 0x00000005 0x00000005 0x00000005 0x00000005 0x00000005
Device:6 Hash: 0x00000006 0x00000006 0x00000006 0x00000006 0x00000006
Device:7 Hash: 0x00000007 0x00000007 0x00000007 0x00000007 0x00000007
Device:8 Hash: 0x00000008 0x00000008 0x00000008 0x00000008 0x00000008
Change-Id: Ibe87b3594793cd5215eba42160489b26974aadbc
Signed-off-by: Todd Broch <tbroch@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214366
Reviewed-by: Alec Berg <alecaberg@chromium.org>
This command was intended to be used for testing, but we have moved on
to the compiled unit tests. Let's put this command behind a config flag
to save precious flash space. This frees up about 640 bytes.
To make sure no one is using this, I searched for "hostcmd" in
platform/ec/test and third_party/autotest/files/server/site_tests.
BUG=None
TEST=make buildall
BRANCH=None
Change-Id: I3192214b71c033c2388f687ed891203d1d119bb9
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214828
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Hibernate is not supported on STM32F0. Disable system hibernate so that
the system doesn't auto-reboot after an hour in G3. This also benefits
us in terms of firmware size.
BUG=chrome-os-partner:31665
TEST=Boot on Ryu. Check 'hibdelay' and 'hibernate' commands are absent.
TEST=Boot Ryu from G3.
TEST=Change default hibernation delay to 1 second. Put system in G3.
Check it does not reboot.
BRANCH=None
Change-Id: Ia01d2d74bc5c22c01e29e5877bd4bd38ee7dddc8
Signed-off-by: Vic Yang <victoryang@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/214834
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
