li feng 5b2e673948 i2c: Retry i2c operation if fails on nack'd(EC_ERROR_BUSY). ...

Retry count is defined by CONFIG_I2C_NACK_RETRY_COUNT.

BUG=chrome-os-partner:37494
TEST=Tested on Cyan, observed retry happens on nack'd i2c.
BRANCH=None

Signed-off-by: li feng <li1.feng@intel.com>
Change-Id: I73ed15a52335de6c5a5b647660bfe431a8238716
Reviewed-on: https://chromium-review.googlesource.com/274689
Reviewed-by: Shawn N <shawnn@chromium.org>
Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Tested-by: Divya Jyothi <divya.jyothi@intel.com>

2015-06-04 20:51:07 +00:00

..

acpi.c

ACPI: Support accessing memmap data over ACPI CMD / DATA ports

2015-03-25 20:09:52 +00:00

adc.c

Move ADC console command to common

2013-12-20 05:07:58 +00:00

als.c

ACPI: Support accessing memmap data over ACPI CMD / DATA ports

2015-03-25 20:09:52 +00:00

ap_hang_detect.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

backlight_lid.c

Support backlight control via lid only

2013-09-27 23:07:21 +00:00

battery.c

Add 'at-shutdown' option to batterycutoff host command

2014-06-15 01:45:21 +00:00

blob.c

Cr50: Add usb_blob handler framework

2015-06-04 19:33:00 +00:00

build.mk

Cr50: Add usb_blob handler framework

2015-06-04 19:33:00 +00:00

button.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

capsense.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

case_closed_debug.c

CCD: Add ability to enable and disable SPI bridge

2015-03-23 19:23:35 +00:00

charge_manager.c

pd: move non-phy layer config out of usb_pd_config.h

2015-05-27 02:39:41 +00:00

charge_ramp.c

pd: move non-phy layer config out of usb_pd_config.h

2015-05-27 02:39:41 +00:00

charge_state_v1.c

charger: Make critical battery shutdown timeout a config option

2015-01-15 05:13:14 +00:00

charge_state_v2.c

mighty: fix the LED bug of removed battery

2015-03-31 06:32:14 +00:00

charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

chipset.c

ryu: add a dummy power module for controlling sensors.

2014-11-18 05:19:47 +00:00

clz.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

console_output.c

console: remove CC_USBMS

2015-04-07 23:20:14 +00:00

console.c

Only process console input after console task started

2015-01-17 23:19:58 +00:00

crc8.c

EC: Add smbus interface read & write APIs

2014-08-29 02:57:00 +00:00

crc.c

Move software CRC implementation to common

2014-08-08 03:11:38 +00:00

eoption.c

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

extpower_falco.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

extpower_gpio.c

Initialize the memory-mapped AC_PRESENT flag

2015-05-28 03:18:06 +00:00

extpower_snow.c

Remove bolt, daisy, kirby, puppy, slippy boards

2013-11-21 22:21:56 +00:00

extpower_spring.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

fan.c

ACPI: Support accessing memmap data over ACPI CMD / DATA ports

2015-03-25 20:09:52 +00:00

firmware_image.lds.S

cleanup: Rename image geometry CONFIGs

2015-05-12 20:54:37 +00:00

firmware_image.S

ryu_sh_loader: Add board directory for load image

2014-12-15 22:46:21 +00:00

flash.c

cleanup: Use appropriate image geometry CONFIGs

2015-05-15 06:42:30 +00:00

fmap.c

cleanup: Use appropriate image geometry CONFIGs

2015-05-15 06:42:30 +00:00

gesture.c

cleanup: rename motion sensor CONFIG_ options

2015-05-01 20:46:37 +00:00

gpio.c

cleanup: Don't admit the existence of unimplemented gpios

2015-02-20 02:59:52 +00:00

hooks.c

hooks: add hook for battery state of charge change

2015-02-03 05:39:18 +00:00

host_command_master.c

pd: Add timeout for HC flash commands.

2015-01-07 08:45:38 +00:00

host_command_pd.c

samus: panic reboot EC if PD MCU crashes

2015-02-18 04:53:59 +00:00

host_command.c

ec: Add Inventory command

2015-05-07 22:25:25 +00:00

host_event_commands.c

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

i2c_arbitration.c

cleanup: rename I2C_PORT_HOST to I2C_PORT_MASTER

2013-10-25 01:32:15 +00:00

i2c_wedge.c

i2c: add wedge command

2014-03-06 21:33:09 +00:00

i2c.c

i2c: Retry i2c operation if fails on nack'd(EC_ERROR_BUSY).

2015-06-04 20:51:07 +00:00

in_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

inductive_charging.c

ryu: improve inductive charging control

2015-01-30 05:11:06 +00:00

keyboard_8042.c

Queue: Add policies to queues

2015-05-26 19:36:15 +00:00

keyboard_mkbp.c

keyboard_mkbp: fix interrupt handling with MKBP_EVENT

2015-05-30 01:04:52 +00:00

keyboard_scan.c

samus: change charge override hot keys to ctrl+search+0|1|2

2015-01-24 06:42:02 +00:00

keyboard_test.c

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.c

ryu: fork P4/P5 support

2015-05-02 16:49:05 +00:00

led_common.c

rambi: fix led command

2014-01-14 09:19:45 +00:00

led_policy_std.c

Standard Power/Charging LED Behavior

2015-01-14 21:49:36 +00:00

lid_angle.c

Convert motion sense calculations to fixed point.

2015-02-05 19:41:41 +00:00

lid_switch.c

lid_switch: Support forced lid open

2014-11-18 01:05:49 +00:00

lightbar.c

ec: Created lightbar params v2

2015-03-31 23:00:33 +00:00

main.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

math_util.c

Convert motion sense calculations to fixed point.

2015-02-05 19:41:41 +00:00

memory_commands.c

cli: add ability to read/write memory of different bus width

2015-05-02 03:39:37 +00:00

mkbp_event.c

ryu: enable MBKP events for PD events

2015-05-28 23:02:18 +00:00

motion_lid.c

cleanup: rename motion sensor CONFIG_ options

2015-05-01 20:46:37 +00:00

motion_sense.c

motion: Add MOTIONSENSE_CMD_DATA: retrieve single sensor data

2015-06-03 19:46:19 +00:00

onewire.c

Move onewire bus support from chip/lm4 to common

2013-08-02 18:22:57 -07:00

out_stream.c

Stream: Add In and Out stream interfaces and config

2014-09-18 02:59:29 +00:00

panic_output.c

panic: Fix unaligned memory access panic

2015-04-14 01:15:43 +00:00

pd_log.c

pd: move non-phy layer config out of usb_pd_config.h

2015-05-27 02:39:41 +00:00

pmu_tps65090_charger.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

pmu_tps65090_powerinfo.c

Add battery_get_params()

2013-12-02 22:03:51 +00:00

pmu_tps65090.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

port80.c

mec1322: Added task-based Port80 POST code support.

2015-04-27 23:29:30 +00:00

power_button_x86.c

skylake: Use a simulated power button press to force-shutdown the AP

2015-06-04 01:15:55 +00:00

power_button.c

Power Button: Wait for power button to be stable when waiting for release

2015-02-10 23:07:14 +00:00

printf.c

optimize printf size without the common runtime

2015-04-10 23:29:27 +00:00

pstore_commands.c

Change host command params/response pointers to void *

2012-07-26 16:25:34 -07:00

pwm_kblight.c

Pad jump tags to 4 bytes inside the system module

2013-11-05 02:32:40 +00:00

pwm.c

Move source files to driver/ and power/ subdirs

2013-10-23 20:07:25 +00:00

queue_policies.c

Producer/Consumer: Refactor to use Queue policies

2015-05-26 19:36:21 +00:00

queue.c

Queue: Add policies to queues

2015-05-26 19:36:15 +00:00

rsa.c

rsa: add support for 4096 and 8192 bit keys

2014-11-15 06:00:02 +00:00

rwsig.c

cleanup: Rename image geometry CONFIGs

2015-05-12 20:54:37 +00:00

sha1.c

Add SHA-1 hash

2014-05-17 20:14:17 +00:00

sha256.c

cleanup: Remove checkpatch warnings

2013-12-19 00:12:28 +00:00

shared_mem.c

samus_pd: make shmem command optional, disable on samus_pd

2015-02-24 00:27:42 +00:00

smbus.c

smbus: Don't use shared memory buffer for word writes

2015-02-04 23:32:42 +00:00

spi_flash_reg.c

spi_flash: Rework protection translation functions

2015-03-17 01:42:30 +00:00

spi_flash.c

spi_flash: Rework protection translation functions

2015-03-17 01:42:30 +00:00

stream_adaptor.c

Producer/Consumer: Refactor to use Queue policies

2015-05-26 19:36:21 +00:00

switch.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

system.c

oak: add initial support for oak board rev1

2015-05-27 05:04:14 +00:00

temp_sensor.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

test_util.c

emulator: Keep fail count across sysjump

2014-01-08 03:49:36 +00:00

thermal.c

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

throttle_ap.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

timer.c

samus_pd: disable timerinfo command to save space

2015-04-10 22:08:31 +00:00

uart_buffering.c

uart_buffering: extend CONSOLE_READ command for easy log concatenation

2015-06-02 01:02:58 +00:00

usb_pd_policy.c

pd: never answer malformed VDM

2015-05-27 21:30:25 +00:00

usb_pd_protocol.c

pd: implement TCPC RX Detect register to enable/disable TCPC RX

2015-06-03 03:50:06 +00:00

usb_pd_tcpc.c

pd: implement TCPC RX Detect register to enable/disable TCPC RX

2015-06-03 03:50:06 +00:00

usb_pd_tcpm_stub.c

pd: implement TCPC RX Detect register to enable/disable TCPC RX

2015-06-03 03:50:06 +00:00

usb_pd_tcpm.c

pd: implement TCPC RX Detect register to enable/disable TCPC RX

2015-06-03 03:50:06 +00:00

usb_port_power_dumb.c

Add cprints() and ccprints()

2014-05-21 20:32:17 +00:00

usb_port_power_smart.c

Support inverted ILIM_SEL for smart USB port power

2014-08-23 02:42:21 +00:00

util.c

Queue: Add methods that accept a memcpy routine

2015-01-08 00:38:13 +00:00

vboot_hash.c

cleanup: Rename image geometry CONFIGs

2015-05-12 20:54:37 +00:00

version.c

Add option to enable GCC LTO

2015-05-19 02:46:27 +00:00

wireless.c

Allow AP to set wireless power state in suspend

2014-02-22 00:50:37 +00:00