scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 10:45:22 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
846741eddbb28e6770532ab09fb64dc619c2f6e6
OpenCellular/include
History
Mary Ruthven f6c7abb503 g: fix rdd to enable sleep 
When the debug cable is disconnected the a USB suspend interrupt is
triggered and puts the chip to sleep before rdd can detect a change on
the cc lines and disconnect from CCD. This prevents the DEBUG_STATE_MAP
from being reset to detect the debug connect and is left detecting the
disconnect. Since the debug accessory is already disconnected the RDD
interrupt will wake up the chip right after it goes to sleep.

The UTMI and PIN wake source still cause the chip to wake up before the
RDD interrupt, so disable those to test this change.

BUG=chrome-os-partner:54796
BRANCH=none
TEST=Disable wake pin and utmi wake sources. Put cr50 to sleep. Attach a
reworked suzy q and make sure cr50 wakes up. Detach it and check that it
goes back to sleep. Do that a couple of times. Check CCD is still
enabled when the debug accessory is detected and disabled on
disconnect.

Change-Id: I58a012895bc874dcdd512aa84de9a917469f3139
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/360234
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
2016-07-14 15:09:34 -07:00
..
accelgyro.h
motion: fix manage_activity interface
2015-10-16 14:46:20 -07:00
acpi.h
Move ACPI stuff out of chip/lm4 and into common
2013-12-12 18:21:56 +00:00
adc.h
servo_v4: Fix ADC console command
2016-05-26 16:17:26 -07:00
als.h
ALS: Disable the ALS task if all the ALS inits fail
2015-10-02 12:55:51 -07:00
ap_hang_detect.h
Add AP hang detection
2013-12-17 21:27:53 +00:00
backlight.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
battery.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
board_config.h
Clean up board configuration
2013-04-05 14:28:42 -07:00
button.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
byteorder.h
Move include/byteorder.h -> builtin/endian.h
2016-04-22 20:40:03 -07:00
capsense.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
case_closed_debug.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
charge_manager.h
Driver: BD99955: Enable BC1.2 support
2016-05-24 15:46:01 -07:00
charge_ramp.h
charge_manager: Report UNKNOWN USB charger for 2 seconds after change
2016-04-03 10:27:36 -07:00
charge_state_v1.h
Move common charge_state time constants to a common header
2014-04-11 15:37:38 +00:00
charge_state_v2.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
charge_state.h
COMMON: move precharge time to config.h
2016-06-01 20:37:08 -07:00
charger_detect.h
lucid: add support to detect BC1.2 suppliers
2016-02-26 21:22:07 -08:00
charger.h
charger: BD99955: Get the VBUS level from the charger
2016-07-13 19:09:39 -07:00
chipset.h
apollolake: ignore PLTRST# from SOC unless RSMRST# is deasserted
2016-05-03 15:40:46 -07:00
clock.h
stm32: Add delay after enabling peripheral clock
2015-02-10 10:47:07 +00:00
common.h
common.h: Create __bss_slow tag.
2015-11-08 07:59:40 -08:00
compile_time_macros.h
NPCX: Refactor GPIO driver for functionality and size
2016-03-02 11:22:51 -08:00
config_std_internal_flash.h
cleanup: Remove CONFIG_FW_IMAGE_SIZE
2015-09-24 18:07:01 -07:00
config.h
Add cts.tasklist
2016-07-11 21:27:46 -07:00
console_channel.inc
cr50: add basic rbox support
2016-04-29 16:07:13 -07:00
console.h
do not allow console commands with names longer than 14 characters
2016-05-18 01:27:45 -07:00
consumer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
crc8.h
crc8: Support crc calculation across non-contiguous data
2016-03-18 22:16:53 -07:00
crc.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
device_state.h
cr50: disable device monitoring when not in ccd
2016-07-12 22:34:56 -07:00
dma.h
common: Change interface to dma_test
2015-07-27 22:19:16 +00:00
dptf.h
Support DPTF charger current limiting
2014-02-08 00:14:48 +00:00
ec_commands.h
common: add EC_RTC_ALARM_CLEAR to ec_commands.h
2016-07-09 01:41:03 -07:00
eeprom.h
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
extension.h
CR50: add support for P256-ECIES (hybrid encryption)
2016-04-19 22:47:36 -07:00
extpower.h
Remove obsolete board-specific code
2015-06-10 18:24:05 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
servo_micro: add programmable serial number
2016-05-26 16:17:26 -07:00
gesture.h
common: motion: move gesture actions in motion task.
2015-09-18 17:55:32 -07:00
gpio_list.h
Add header files needed by gpio_list.h
2016-04-12 15:22:29 -07:00
gpio_signal.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio.h
servo_micro: add gpio mode get and set
2016-04-27 14:04:07 -07:00
gpio.wrap
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
hooks.h
reef: Initialize charge suppliers after change manager is initialized
2016-05-28 00:08:38 -07:00
host_command.h
common: Include host/console commands based on HAS_TASK_HOSTCMD/CONSOLE
2015-12-18 12:43:50 -08:00
hwtimer.h
pit: Clean up timer init code
2013-06-26 09:08:23 -07:00
i2c.h
common/i2c: Add I2C passthru_protect command
2016-05-24 19:23:27 -07:00
i8042_protocol.h
More supports for A20 enable/disable
2012-11-04 20:27:57 -08:00
inductive_charging.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
jtag.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_8042_sharedlib.h
libsharedobjs: Add 8042 scancodes to shared lib.
2015-07-17 03:18:03 +00:00
keyboard_8042.h
Add support for extra buttons not on the keyboard
2014-02-07 04:13:18 +00:00
keyboard_config.h
keyboard_scan: Support boot key recognition with stuck KSI2
2016-06-30 20:14:01 -07:00
keyboard_mkbp.h
cleanup: mkbp keyboard module
2013-10-30 23:10:13 +00:00
keyboard_protocol.h
8042: Add interface for handling off-matrix button changes
2014-02-07 04:13:14 +00:00
keyboard_raw.h
ectool: Support keyboard factory scanning
2016-04-01 00:21:35 -07:00
keyboard_scan.h
Refactored keyboard scan enable flag to allow for multiple disable reasons
2014-04-11 20:02:30 +00:00
keyboard_test.h
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.h
common: lightbar: put multiple commands under i2c_lock
2015-09-19 12:27:21 -07:00
led_common.h
lucid: add LED support
2015-12-22 21:07:25 -08:00
libsharedobjs.h
libsharedobjs: Add libsharedobjs.h.
2015-07-17 03:17:57 +00:00
lid_angle.h
Cyan: Added Clamshell/Tablet mode support
2015-08-10 20:42:18 +00:00
lid_switch.h
Split lid switch code out of switch.c to its own file
2013-04-02 14:12:57 -07:00
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
common: lightbar: Add histeresis to prevent flickering
2015-10-23 18:03:12 -07:00
link_defs.h
Deferred: Remove hard coded number of deferreds
2016-04-19 12:23:52 -07:00
lpc.h
skylake: set and clear wake masks in S0 <-> S0ix transitions
2016-02-10 12:44:15 -08:00
mag_cal.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat33.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat44.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
math_util.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
memory_commands.h
Initial sources import 2/3
2011-12-07 19:10:02 +00:00
mkbp_event.h
mkbp_event: Don't discard event source structures due to LTO
2016-05-25 22:55:43 -07:00
module_id.h
cr50: add basic rbox support
2016-04-29 16:07:13 -07:00
motion_lid.h
ectool: provide lid angle info
2015-11-25 18:15:38 -08:00
motion_sense.h
sensor: update sensor driver to use I2C port from motion_sensor_t
2016-03-31 21:35:56 -07:00
nvmem.h
Cr50: NvMem: Connected function stubs in /board/tpm2/NVMem.c
2016-05-26 18:08:57 -07:00
onewire.h
Clean up LED and onewire modules
2012-10-25 14:12:11 -07:00
panic.h
nds32: fix panic
2015-10-07 17:51:36 -07:00
peci.h
Switch temp sensor polling to use hooks instead of task
2012-11-01 12:45:22 -07:00
pmu_tpschrome.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
port80.h
mec1322: Change the Port 80 task to a timer IRQ.
2015-10-19 18:21:22 -07:00
power_button.h
cleanup: Fix signed vs unsigned typing
2016-02-03 21:34:47 -08:00
power_led.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
power.h
kunimitsu: hibernate: enable PseudoG3 support at board level
2016-02-18 17:35:16 -08:00
printf.h
Clean up printf module
2012-10-25 14:12:10 -07:00
producer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
pwm.h
pwm: Add PWM_CONFIG_DSLEEP config flag
2016-04-27 23:58:04 -07:00
queue_policies.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
queue.h
Queue: Add ability to modify contiguous units inplace
2015-07-15 21:57:36 +00:00
rsa.h
cleanup: Handle signed RW images a bit cleaner
2015-09-25 19:36:37 -07:00
sfdp.h
common: Fixes the SFDP_BITFIELD() macro.
2016-01-29 02:59:58 +00:00
sha1.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
sha256.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
shared_mem.h
Tidy shared memory module
2012-08-09 17:40:37 -07:00
smbus.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
software_panic.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
spi_flash_reg.h
Celes: Add define to support GD25Q41B for External EC ROM.
2015-09-15 19:17:53 -07:00
spi_flash.h
spi_flash: Add protect support for W25X40
2015-03-11 23:18:09 +00:00
spi_nor.h
common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver
2016-01-28 21:45:37 +00:00
spi.h
cr50: adds the SPI master driver
2015-12-21 14:58:54 -08:00
stack_trace.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
switch.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
system.h
g: fix rdd to enable sleep
2016-07-14 15:09:34 -07:00
task_id.h
Add cts.tasklist
2016-07-11 21:27:46 -07:00
task.h
Don't declare functions inline that aren't always defined as such
2016-02-02 17:20:04 -08:00
temp_sensor_chip.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
temp_sensor.h
Include battery fuel gauge temp sensor in temperature sensors
2014-02-08 04:21:26 +00:00
test_util.h
host: mock i2c_xfer
2015-09-16 14:49:46 -07:00
thermal.h
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.h
Add more build conditions on x86-only code.
2014-08-10 18:39:24 +00:00
timer.h
Enforce compilation without system headers
2016-02-03 15:00:50 -08:00
tpm_registers.h
add command multiplexer to the TPM driver
2015-11-18 00:14:03 -08:00
trng.h
Enforce compilation without system headers
2016-02-03 15:00:50 -08:00
uart.h
UART: Remove enable/disable interrupt functions
2016-04-27 10:10:02 -07:00
usb_api.h
cr50: Detect debug cable and switch the PHY
2016-04-13 20:10:38 -07:00
usb_bb.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_charge.h
bd99955: Improve interrupt / USB charger task wake scheme
2016-06-16 12:27:42 -07:00
usb_console.h
update case closed debugging partial mode policy
2015-09-08 13:49:09 -07:00
usb_descriptor.h
servo_micro: add programmable serial number
2016-05-26 16:17:26 -07:00
usb_hid.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_mux.h
usb_mux: Add support for host-controlled 'virtual' USB mux
2016-06-24 17:23:14 -07:00
usb_pd_tcpc.h
tcpm: Add configuration struct for tcpc i2c params
2015-11-08 17:31:12 -08:00
usb_pd_tcpm.h
tcpm: update code to support multiple tcpm driver
2016-04-17 12:23:07 -07:00
usb_pd.h
Deferred: Use deferred_data instead of function pointer
2016-04-18 17:32:40 -07:00
util.h
CR50: remove dependence of assert.h on util.h
2016-05-25 18:51:07 -07:00
vboot_hash.h
vboot_hash: Abort hash calculation on flash write
2015-07-01 03:49:00 +00:00
vec3.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
vec4.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
zinger: change watchdog timeout to 1.8 second
2014-06-17 18:34:03 +00:00
wireless.h
Initial Glower commit
2015-01-20 20:56:43 +00:00