scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2026-01-07 16:11:43 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
b2a751cfd8b5f543e7b40f32c81a7a6f876c42c7
OpenCellular/include
History
Mary Ruthven b2a751cfd8 cr50: mark updated image as good once a usb request is received 
There is now a call to reset the retry counter before the hard reset
after an update. Cr50 will use the updated image for the next 5 boots,
but on the 6th it sees the retry counter is greater than 5 and then
jumps back to the old image. Cr50 needs to call
system_process_retry_counter to reset the counter and corrupt the old
image header to prevent falling back to the old image.

Normally the reset counter would be processed after it receives a TPM
command. Reef does not have Cr50 TPM support. Until Cr50 has TPM
support for Reef, Cr50 should have a different point to know when the
update is good. This change adds a board property to mark the process
the reset counter once the Cr50 USB controller receives a set address
request from the host. On Reef the controller defaults to the AP PHY
when suzyq is not connected, so it should have a connection to the AP
or through suzyq after boot.

The board property is only added to Reef. Behavior on Kevin and Gru is
unchanged.

BUG=chrome-os-partner:56864
BRANCH=none
TEST=update reef. Wait until Cr50 prints 'SETAD' then run 'rw
0x4000012c' and verify it is reset to 0.

Change-Id: If517202f25a694cd70550e3be047ea502e7c5383
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/380354
2016-09-02 18:34:19 -07:00
..
accelgyro.h
motion: fix manage_activity interface
2015-10-16 14:46:20 -07:00
acpi.h
Move ACPI stuff out of chip/lm4 and into common
2013-12-12 18:21:56 +00:00
adc.h
servo_v4: Fix ADC console command
2016-05-26 16:17:26 -07:00
als.h
ALS: Disable the ALS task if all the ALS inits fail
2015-10-02 12:55:51 -07:00
ap_hang_detect.h
Add AP hang detection
2013-12-17 21:27:53 +00:00
backlight.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
battery.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
bluetooth_le_ll.h
btle: Accepts and maintains connections
2016-08-23 15:36:55 -07:00
bluetooth_le.h
btle: Timeout of ble_rx now based on chip time
2016-08-12 20:49:45 -07:00
board_config.h
Clean up board configuration
2013-04-05 14:28:42 -07:00
btle_hci2.h
include: Add HCI include files from NewBlue
2016-07-22 20:37:17 -07:00
btle_hci_int.h
include: Add HCI include files from NewBlue
2016-07-22 20:37:17 -07:00
button.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
byteorder.h
Move include/byteorder.h -> builtin/endian.h
2016-04-22 20:40:03 -07:00
capsense.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
case_closed_debug.h
cr50: connect to AP phy on reef when not in ccd
2016-08-25 01:46:39 -07:00
charge_manager.h
pd: manage total source current available
2016-09-01 19:52:35 -07:00
charge_ramp.h
charge_manager: Report UNKNOWN USB charger for 2 seconds after change
2016-04-03 10:27:36 -07:00
charge_state_v1.h
Move common charge_state time constants to a common header
2014-04-11 15:37:38 +00:00
charge_state_v2.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
charge_state.h
COMMON: move precharge time to config.h
2016-06-01 20:37:08 -07:00
charger_detect.h
lucid: add support to detect BC1.2 suppliers
2016-02-26 21:22:07 -08:00
charger.h
charger: BD99955: Get the VBUS level from the charger
2016-07-13 19:09:39 -07:00
chipset.h
apollolake: ignore PLTRST# from SOC unless RSMRST# is deasserted
2016-05-03 15:40:46 -07:00
clock.h
stm32: Add delay after enabling peripheral clock
2015-02-10 10:47:07 +00:00
common.h
common.h: Create __bss_slow tag.
2015-11-08 07:59:40 -08:00
compile_time_macros.h
NPCX: Refactor GPIO driver for functionality and size
2016-03-02 11:22:51 -08:00
config_std_internal_flash.h
cleanup: Remove CONFIG_FW_IMAGE_SIZE
2015-09-24 18:07:01 -07:00
config.h
button: Add console command to simulate button press
2016-09-02 15:12:21 -07:00
console_channel.inc
btle: Add the HCI layer
2016-08-08 01:48:45 -07:00
console.h
Add console support for restricted commands
2016-08-31 17:12:58 +00:00
consumer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
crc8.h
crc8: Support crc calculation across non-contiguous data
2016-03-18 22:16:53 -07:00
crc.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
device_state.h
cr50: disable device monitoring when not in ccd
2016-07-12 22:34:56 -07:00
dma.h
common: Change interface to dma_test
2015-07-27 22:19:16 +00:00
dptf.h
Support DPTF charger current limiting
2014-02-08 00:14:48 +00:00
ec_commands.h
Revert "ectool: Add ectool command to do AP force shutdown"
2016-09-01 05:02:38 -07:00
eeprom.h
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
espi.h
npcx: Add espi driver of npcx5mng for x86-based platform.
2016-08-10 22:16:57 -07:00
extension.h
cr50: Rename EXTENSION_EC to EXTENSION_ECC
2016-08-07 23:48:38 -07:00
extpower.h
Remove obsolete board-specific code
2015-06-10 18:24:05 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
servo_micro: add programmable serial number
2016-05-26 16:17:26 -07:00
gesture.h
common: motion: move gesture actions in motion task.
2015-09-18 17:55:32 -07:00
gpio_list.h
Add header files needed by gpio_list.h
2016-04-12 15:22:29 -07:00
gpio_signal.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio.h
servo_micro: add gpio mode get and set
2016-04-27 14:04:07 -07:00
gpio.wrap
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
hooks.h
reef: Initialize charge suppliers after change manager is initialized
2016-05-28 00:08:38 -07:00
host_command.h
common: Include host/console commands based on HAS_TASK_HOSTCMD/CONSOLE
2015-12-18 12:43:50 -08:00
hwtimer.h
pit: Clean up timer init code
2013-06-26 09:08:23 -07:00
i2c.h
common/i2c: Add I2C passthru_protect command
2016-05-24 19:23:27 -07:00
i8042_protocol.h
More supports for A20 enable/disable
2012-11-04 20:27:57 -08:00
inductive_charging.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
jtag.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_8042_sharedlib.h
libsharedobjs: Add 8042 scancodes to shared lib.
2015-07-17 03:18:03 +00:00
keyboard_8042.h
Add support for extra buttons not on the keyboard
2014-02-07 04:13:18 +00:00
keyboard_config.h
keyboard_scan: Support boot key recognition with stuck KSI2
2016-06-30 20:14:01 -07:00
keyboard_mkbp.h
mkbp: Add support for buttons and switches.
2016-07-19 18:33:36 -07:00
keyboard_protocol.h
8042: Add interface for handling off-matrix button changes
2014-02-07 04:13:14 +00:00
keyboard_raw.h
ectool: Support keyboard factory scanning
2016-04-01 00:21:35 -07:00
keyboard_scan.h
Refactored keyboard scan enable flag to allow for multiple disable reasons
2014-04-11 20:02:30 +00:00
keyboard_test.h
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.h
common: lightbar: put multiple commands under i2c_lock
2015-09-19 12:27:21 -07:00
led_common.h
lucid: add LED support
2015-12-22 21:07:25 -08:00
libsharedobjs.h
libsharedobjs: Add libsharedobjs.h.
2015-07-17 03:17:57 +00:00
lid_angle.h
Cyan: Added Clamshell/Tablet mode support
2015-08-10 20:42:18 +00:00
lid_switch.h
Split lid switch code out of switch.c to its own file
2013-04-02 14:12:57 -07:00
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
common: lightbar: Add histeresis to prevent flickering
2015-10-23 18:03:12 -07:00
link_defs.h
Deferred: Remove hard coded number of deferreds
2016-04-19 12:23:52 -07:00
lpc.h
skylake: set and clear wake masks in S0 <-> S0ix transitions
2016-02-10 12:44:15 -08:00
mag_cal.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat33.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat44.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
math_util.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
memory_commands.h
Initial sources import 2/3
2011-12-07 19:10:02 +00:00
mkbp_event.h
mkbp_event: Don't discard event source structures due to LTO
2016-05-25 22:55:43 -07:00
module_id.h
stm32f446e-eval: add support for stm32f446
2016-08-17 16:19:07 -07:00
motion_lid.h
motion_lid: Fix include file.
2016-08-24 17:40:32 -07:00
motion_sense.h
sensor: update sensor driver to use I2C port from motion_sensor_t
2016-03-31 21:35:56 -07:00
nvmem.h
cr50: fix nvmem calculations
2016-08-08 20:19:44 -07:00
onewire.h
Clean up LED and onewire modules
2012-10-25 14:12:11 -07:00
panic.h
nds32: fix panic
2015-10-07 17:51:36 -07:00
peci.h
Switch temp sensor polling to use hooks instead of task
2012-11-01 12:45:22 -07:00
pmu_tpschrome.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
port80.h
mec1322: Change the Port 80 task to a timer IRQ.
2015-10-19 18:21:22 -07:00
power_button.h
cleanup: Fix signed vs unsigned typing
2016-02-03 21:34:47 -08:00
power_led.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
power.h
power: rk3399: Debounce PGOOD_AP signal
2016-08-25 01:45:26 -07:00
printf.h
printf: Add sign ('+') flag
2016-07-29 10:51:22 -07:00
producer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
pwm.h
pwm: Increse PWM duty resolution to 16bits
2016-09-02 15:12:13 -07:00
queue_policies.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
queue.h
Queue: Add ability to modify contiguous units inplace
2015-07-15 21:57:36 +00:00
rsa.h
cleanup: Handle signed RW images a bit cleaner
2015-09-25 19:36:37 -07:00
sfdp.h
common: Fixes the SFDP_BITFIELD() macro.
2016-01-29 02:59:58 +00:00
sha1.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
sha256.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
shared_mem.h
Tidy shared memory module
2012-08-09 17:40:37 -07:00
smbus.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
software_panic.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
spi_flash_reg.h
Celes: Add define to support GD25Q41B for External EC ROM.
2015-09-15 19:17:53 -07:00
spi_flash.h
spi_flash: Add protect support for W25X40
2015-03-11 23:18:09 +00:00
spi_nor.h
common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver
2016-01-28 21:45:37 +00:00
spi.h
cr50: adds the SPI master driver
2015-12-21 14:58:54 -08:00
stack_trace.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
switch.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
system.h
cr50: mark updated image as good once a usb request is received
2016-09-02 18:34:19 -07:00
task_id.h
Add cts.tasklist
2016-07-11 21:27:46 -07:00
task.h
stm32f446e-eval: add support for stm32f446
2016-08-17 16:19:07 -07:00
temp_sensor_chip.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
temp_sensor.h
Include battery fuel gauge temp sensor in temperature sensors
2014-02-08 04:21:26 +00:00
test_util.h
host: mock i2c_xfer
2015-09-16 14:49:46 -07:00
thermal.h
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.h
Add more build conditions on x86-only code.
2014-08-10 18:39:24 +00:00
timer.h
timer: fix clock() implementation to match TPM2 library expectations
2016-07-21 17:32:28 -07:00
tpm_manufacture.h
CR50: add endorsement certificate flow
2016-07-23 02:18:49 +00:00
tpm_registers.h
HACK tpm: reset fallback counter when ready
2016-07-29 19:22:04 -07:00
trng.h
Enforce compilation without system headers
2016-02-03 15:00:50 -08:00
uart.h
UART: Remove enable/disable interrupt functions
2016-04-27 10:10:02 -07:00
update_fw.h
servo_v4: copypasta usb updater code into common
2016-07-21 13:13:35 -07:00
usb_api.h
cr50: Detect debug cable and switch the PHY
2016-04-13 20:10:38 -07:00
usb_bb.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_charge.h
bd99955: Improve interrupt / USB charger task wake scheme
2016-06-16 12:27:42 -07:00
usb_console.h
update case closed debugging partial mode policy
2015-09-08 13:49:09 -07:00
usb_descriptor.h
sweetberry: add dwc usb support
2016-09-01 22:56:22 -07:00
usb_hid.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_mux.h
kevin / gru: Notify host of HPD IRQ status
2016-08-10 20:07:32 -07:00
usb_pd_tcpc.h
tcpm: Add configuration struct for tcpc i2c params
2015-11-08 17:31:12 -08:00
usb_pd_tcpm.h
pd: select dynamically Rp value
2016-08-25 07:32:31 -07:00
usb_pd.h
pd: manage total source current available
2016-09-01 19:52:35 -07:00
util.h
CR50: remove dependence of assert.h on util.h
2016-05-25 18:51:07 -07:00
vboot_hash.h
vboot_hash: Abort hash calculation on flash write
2015-07-01 03:49:00 +00:00
vec3.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
vec4.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
zinger: change watchdog timeout to 1.8 second
2014-06-17 18:34:03 +00:00
wireless.h
Initial Glower commit
2015-01-20 20:56:43 +00:00