Vijay Hiremath 33fe5e437d charger/Kunimitsu: Fix for boot from cut-off battery ...

Battery in cut-off mode wakes when voltage is applied to the PACK
and takes approximately 2 to 3 seconds to initialize before capable
of providing the power. Hence made the battery present status to
BP_NO in case of cut-off mode. Once the battery is ready new status
is updated as BP_YES.
When the battery status changes from BP_NO to BP_YES, charger input
current is set to board specific charger input current which is not
sufficient to boot the AP hence the system reboots. To avoid this
issue, added code to write charger manager negotiated current to
charger input current when the battery status changes from BP_NO to
BP_YES.

BRANCH=none
BUG=chrome-os-partner:49224
TEST=Manually tested on Kunimitsu.
     Used console command 'cutoff' to put the battery in cut-off mode.
     Inserted the adopter to wake the system, system doesn't reboot &
     the battery charges.

Change-Id: Ia5a1457506b4bef0b3dd27993e4b60ae64c8f746
Signed-off-by: Vijay Hiremath <vijay.p.hiremath@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/322430
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>

2016-02-02 23:48:33 -08:00

..

accelgyro.h

motion: fix manage_activity interface

2015-10-16 14:46:20 -07:00

acpi.h

Move ACPI stuff out of chip/lm4 and into common

2013-12-12 18:21:56 +00:00

adc.h

stm32: adc: Add support for DMA continuous mode

2015-12-21 14:58:56 -08:00

als.h

ALS: Disable the ALS task if all the ALS inits fail

2015-10-02 12:55:51 -07:00

ap_hang_detect.h

Add AP hang detection

2013-12-17 21:27:53 +00:00

backlight.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

battery_bq27621_g1.h

battery: Add support for TI's BQ27621_g1 fuel gauge.

2014-12-31 00:01:00 +00:00

battery_smart.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

battery.h

i2c: get battery information from charge state

2015-10-27 11:52:34 -07:00

blob.h

Cr50: Add usb_blob handler framework

2015-06-04 19:33:00 +00:00

board_config.h

Clean up board configuration

2013-04-05 14:28:42 -07:00

button.h

Samus: Support capsense input as keyboard events.

2014-02-08 04:15:39 +00:00

byteorder.h

common: byte order conversion functions

2015-11-15 11:23:22 -08:00

capsense.h

Samus: Support capsense input as keyboard events.

2014-02-08 04:15:39 +00:00

case_closed_debug.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

charge_manager.h

charger/Kunimitsu: Fix for boot from cut-off battery

2016-02-02 23:48:33 -08:00

charge_ramp.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

charge_state_v1.h

Move common charge_state time constants to a common header

2014-04-11 15:37:38 +00:00

charge_state_v2.h

i2c: get battery information from charge state

2015-10-27 11:52:34 -07:00

charge_state.h

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

charger.h

charger: Change unlocked battery level ignore conditions

2016-01-06 18:48:11 -08:00

chipset.h

Kunimitsu: Add S0ix on SLP_S0 assertion

2015-11-19 20:01:58 -08:00

clock.h

stm32: Add delay after enabling peripheral clock

2015-02-10 10:47:07 +00:00

common.h

common.h: Create __bss_slow tag.

2015-11-08 07:59:40 -08:00

compile_time_macros.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

config_std_internal_flash.h

cleanup: Remove CONFIG_FW_IMAGE_SIZE

2015-09-24 18:07:01 -07:00

config.h

common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver

2016-01-28 21:45:37 +00:00

console.h

common: Include host/console commands based on HAS_TASK_HOSTCMD/CONSOLE

2015-12-18 12:43:50 -08:00

consumer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

crc8.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

crc.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

dma.h

common: Change interface to dma_test

2015-07-27 22:19:16 +00:00

dptf.h

Support DPTF charger current limiting

2014-02-08 00:14:48 +00:00

ec_commands.h

ec: Add temporary secure storage for the host during boot

2016-01-25 21:46:48 -08:00

eeprom.h

cleanup: eeprom and option comments

2013-10-25 20:12:49 +00:00

extension.h

Initial RSA implementation.

2016-01-11 22:03:13 -08:00

extpower.h

Remove obsolete board-specific code

2015-06-10 18:24:05 +00:00

fan.h

Samus: Handle fan startup in the EC, not the fan controller

2014-11-06 02:28:22 +00:00

flash.h

cleanup: Remove superfluous #defines

2015-09-25 18:05:27 -07:00

gesture.h

common: motion: move gesture actions in motion task.

2015-09-18 17:55:32 -07:00

gpio_list.h

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

gpio_signal.h

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

gpio.h

GPIO: Remove gpio_get_level_reg function

2016-01-27 08:44:22 -08:00

gpio.wrap

mec1322: Simplify GPIO lists

2015-05-27 03:58:16 +00:00

hooks.h

ec: Add a chipset reset hook

2016-01-25 21:46:48 -08:00

host_command.h

common: Include host/console commands based on HAS_TASK_HOSTCMD/CONSOLE

2015-12-18 12:43:50 -08:00

hwtimer.h

pit: Clean up timer init code

2013-06-26 09:08:23 -07:00

i2c.h

stm32f0: i2c: Set timing register values by port clock source

2015-10-30 14:33:29 -07:00

i8042_protocol.h

More supports for A20 enable/disable

2012-11-04 20:27:57 -08:00

inductive_charging.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

jtag.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

keyboard_8042_sharedlib.h

libsharedobjs: Add 8042 scancodes to shared lib.

2015-07-17 03:18:03 +00:00

keyboard_8042.h

Add support for extra buttons not on the keyboard

2014-02-07 04:13:18 +00:00

keyboard_config.h

samus: change charge override hot keys to ctrl+search+0|1|2

2015-01-24 06:42:02 +00:00

keyboard_mkbp.h

cleanup: mkbp keyboard module

2013-10-30 23:10:13 +00:00

keyboard_protocol.h

8042: Add interface for handling off-matrix button changes

2014-02-07 04:13:14 +00:00

keyboard_raw.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

keyboard_scan.h

Refactored keyboard scan enable flag to allow for multiple disable reasons

2014-04-11 20:02:30 +00:00

keyboard_test.h

Move keyboard dimension and key constants to keyboard_config.h

2013-03-22 11:24:29 -07:00

lb_common.h

common: lightbar: put multiple commands under i2c_lock

2015-09-19 12:27:21 -07:00

led_common.h

lucid: add LED support

2015-12-22 21:07:25 -08:00

libsharedobjs.h

libsharedobjs: Add libsharedobjs.h.

2015-07-17 03:17:57 +00:00

lid_angle.h

Cyan: Added Clamshell/Tablet mode support

2015-08-10 20:42:18 +00:00

lid_switch.h

Split lid switch code out of switch.c to its own file

2013-04-02 14:12:57 -07:00

lightbar_msg_list.h

Remove PULSE and TEST sequences from lightbar module

2014-10-08 02:50:54 +00:00

lightbar_opcode_list.h

lightbar: interpreter additions to encode other patterns

2014-10-15 18:22:37 +00:00

lightbar.h

common: lightbar: Add histeresis to prevent flickering

2015-10-23 18:03:12 -07:00

link_defs.h

ec: Add a chipset reset hook

2016-01-25 21:46:48 -08:00

lpc.h

Fix assertion crash in __wait_evt()

2015-06-25 17:21:50 +00:00

mag_cal.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat33.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

mat44.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

math_util.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

memory_commands.h

Initial sources import 2/3

2011-12-07 19:10:02 +00:00

mkbp_event.h

MKBP event signalling implementation

2014-10-24 01:37:58 +00:00

module_id.h

pwm: Add common initialization for PWM pins

2015-12-04 01:20:33 -08:00

motion_lid.h

ectool: provide lid angle info

2015-11-25 18:15:38 -08:00

motion_sense.h

motion: improve readability by adding units to variable names.

2015-11-19 16:28:03 -08:00

onewire.h

Clean up LED and onewire modules

2012-10-25 14:12:11 -07:00

panic.h

nds32: fix panic

2015-10-07 17:51:36 -07:00

peci.h

Switch temp sensor polling to use hooks instead of task

2012-11-01 12:45:22 -07:00

pmu_tpschrome.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

port80.h

mec1322: Change the Port 80 task to a timer IRQ.

2015-10-19 18:21:22 -07:00

power_button.h

skylake: Use a simulated power button press to force-shutdown the AP

2015-06-04 01:15:55 +00:00

power_led.h

Replace generated CONFIG_TASK_ macros with HAS_TASK_

2013-04-24 16:32:58 -07:00

power.h

Don't declare functions inline that aren't always defined as such

2016-02-02 17:20:04 -08:00

printf.h

Clean up printf module

2012-10-25 14:12:10 -07:00

producer.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

pwm.h

stm32: pwm: Allow configuration of pwm frequency + complementary outputs

2015-12-04 01:20:33 -08:00

queue_policies.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

queue.h

Queue: Add ability to modify contiguous units inplace

2015-07-15 21:57:36 +00:00

rsa.h

cleanup: Handle signed RW images a bit cleaner

2015-09-25 19:36:37 -07:00

sfdp.h

common: Fixes the SFDP_BITFIELD() macro.

2016-01-29 02:59:58 +00:00

sha1.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

sha256.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

shared_mem.h

Tidy shared memory module

2012-08-09 17:40:37 -07:00

smbus.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

software_panic.h

samus: panic reboot EC if PD MCU crashes

2015-02-18 04:53:59 +00:00

spi_flash_reg.h

Celes: Add define to support GD25Q41B for External EC ROM.

2015-09-15 19:17:53 -07:00

spi_flash.h

spi_flash: Add protect support for W25X40

2015-03-11 23:18:09 +00:00

spi_nor.h

common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver

2016-01-28 21:45:37 +00:00

spi.h

cr50: adds the SPI master driver

2015-12-21 14:58:54 -08:00

stack_trace.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

switch.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

system.h

system: Add hibernate board-level callback

2016-01-28 22:54:54 -08:00

task_id.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

task.h

Don't declare functions inline that aren't always defined as such

2016-02-02 17:20:04 -08:00

temp_sensor_chip.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

temp_sensor.h

Include battery fuel gauge temp sensor in temperature sensors

2014-02-08 04:21:26 +00:00

test_util.h

host: mock i2c_xfer

2015-09-16 14:49:46 -07:00

thermal.h

Show the fan-cooling percentage for each active temp sensor

2015-01-14 03:15:41 +00:00

throttle_ap.h

Add more build conditions on x86-only code.

2014-08-10 18:39:24 +00:00

timer.h

motion_sense: calculate threshold properly

2015-08-24 19:08:15 +00:00

tpm_registers.h

add command multiplexer to the TPM driver

2015-11-18 00:14:03 -08:00

trng.h

Move rand_bytes implementation from tpm2 to chip/g.

2015-12-22 13:12:53 -08:00

uart.h

gpio: Refactor IRQ handler pointer out of gpio_list

2015-04-10 22:08:25 +00:00

usb_api.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_bb.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_charge.h

usb_charge: fix custom event mask

2015-09-11 13:51:07 -07:00

usb_console.h

update case closed debugging partial mode policy

2015-09-08 13:49:09 -07:00

usb_descriptor.h

usb: Put HID descriptor in the correct order

2015-12-01 18:52:52 -08:00

usb_hid.h

cleanup: fix all the header guards

2015-06-18 19:07:00 +00:00

usb_mux.h

tcpc: add support for TCPC with integrated high-speed muxes

2016-01-27 14:52:18 -08:00

usb_pd_tcpc.h

tcpm: Add configuration struct for tcpc i2c params

2015-11-08 17:31:12 -08:00

usb_pd_tcpm.h

pd: Add support for multiple distinct TCPC alert signals

2015-11-25 12:59:17 -08:00

usb_pd.h

pd: Cleanup PD port-to-task macros

2015-11-11 08:05:40 -08:00

util.h

common: Add __fls function

2015-09-21 01:13:54 -07:00

vboot_hash.h

vboot_hash: Abort hash calculation on flash write

2015-07-01 03:49:00 +00:00

vec3.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

vec4.h

common: Add magnetometer online calibration.

2015-10-13 05:28:54 -07:00

version.h

zinger: samus_pd: change zinger SW ver to report commit count

2014-08-28 20:12:52 +00:00

watchdog.h

zinger: change watchdog timeout to 1.8 second

2014-06-17 18:34:03 +00:00

wireless.h

Initial Glower commit

2015-01-20 20:56:43 +00:00