scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 10:45:22 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
fcc09a2b7d1d63ada5900bdc0a3206c748f7cbdd
OpenCellular/include
History
Shawn Nematbakhsh fcc09a2b7d usb_charger: Support inverted 5V_EN GPIO polarity 
Kevin uses inverted polarity (low = enable 5V output), so add a new CONFIG
to support this.

BUG=chrome-os-partner:53777
BRANCH=None
TEST=Manual on Kevin. Enable USB charger tasks, verify that VBUS is
properly detected on no-battery case.

Change-Id: Ifb3e5fa9db1973d9826435712711f0cb0fd1d3a5
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/349260
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2016-06-02 22:25:46 -07:00
..
accelgyro.h
motion: fix manage_activity interface
2015-10-16 14:46:20 -07:00
acpi.h
Move ACPI stuff out of chip/lm4 and into common
2013-12-12 18:21:56 +00:00
adc.h
servo_v4: Fix ADC console command
2016-05-26 16:17:26 -07:00
als.h
ALS: Disable the ALS task if all the ALS inits fail
2015-10-02 12:55:51 -07:00
ap_hang_detect.h
Add AP hang detection
2013-12-17 21:27:53 +00:00
backlight.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
battery.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
board_config.h
Clean up board configuration
2013-04-05 14:28:42 -07:00
button.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
byteorder.h
Move include/byteorder.h -> builtin/endian.h
2016-04-22 20:40:03 -07:00
capsense.h
Samus: Support capsense input as keyboard events.
2014-02-08 04:15:39 +00:00
case_closed_debug.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
charge_manager.h
Driver: BD99955: Enable BC1.2 support
2016-05-24 15:46:01 -07:00
charge_ramp.h
charge_manager: Report UNKNOWN USB charger for 2 seconds after change
2016-04-03 10:27:36 -07:00
charge_state_v1.h
Move common charge_state time constants to a common header
2014-04-11 15:37:38 +00:00
charge_state_v2.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
charge_state.h
COMMON: move precharge time to config.h
2016-06-01 20:37:08 -07:00
charger_detect.h
lucid: add support to detect BC1.2 suppliers
2016-02-26 21:22:07 -08:00
charger.h
charger: Change unlocked battery level ignore conditions
2016-01-06 18:48:11 -08:00
chipset.h
apollolake: ignore PLTRST# from SOC unless RSMRST# is deasserted
2016-05-03 15:40:46 -07:00
clock.h
stm32: Add delay after enabling peripheral clock
2015-02-10 10:47:07 +00:00
common.h
common.h: Create __bss_slow tag.
2015-11-08 07:59:40 -08:00
compile_time_macros.h
NPCX: Refactor GPIO driver for functionality and size
2016-03-02 11:22:51 -08:00
config_std_internal_flash.h
cleanup: Remove CONFIG_FW_IMAGE_SIZE
2015-09-24 18:07:01 -07:00
config.h
usb_charger: Support inverted 5V_EN GPIO polarity
2016-06-02 22:25:46 -07:00
console_channel.inc
cr50: add basic rbox support
2016-04-29 16:07:13 -07:00
console.h
do not allow console commands with names longer than 14 characters
2016-05-18 01:27:45 -07:00
consumer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
crc8.h
crc8: Support crc calculation across non-contiguous data
2016-03-18 22:16:53 -07:00
crc.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
device_state.h
cr50: monitor the state of Servo, the EC, and AP
2016-05-27 18:08:50 -07:00
dma.h
common: Change interface to dma_test
2015-07-27 22:19:16 +00:00
dptf.h
Support DPTF charger current limiting
2014-02-08 00:14:48 +00:00
ec_commands.h
driver: Add support bma255 sensor
2016-05-31 14:14:44 -07:00
eeprom.h
cleanup: eeprom and option comments
2013-10-25 20:12:49 +00:00
extension.h
CR50: add support for P256-ECIES (hybrid encryption)
2016-04-19 22:47:36 -07:00
extpower.h
Remove obsolete board-specific code
2015-06-10 18:24:05 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
servo_micro: add programmable serial number
2016-05-26 16:17:26 -07:00
gesture.h
common: motion: move gesture actions in motion task.
2015-09-18 17:55:32 -07:00
gpio_list.h
Add header files needed by gpio_list.h
2016-04-12 15:22:29 -07:00
gpio_signal.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio.h
servo_micro: add gpio mode get and set
2016-04-27 14:04:07 -07:00
gpio.wrap
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
hooks.h
reef: Initialize charge suppliers after change manager is initialized
2016-05-28 00:08:38 -07:00
host_command.h
common: Include host/console commands based on HAS_TASK_HOSTCMD/CONSOLE
2015-12-18 12:43:50 -08:00
hwtimer.h
pit: Clean up timer init code
2013-06-26 09:08:23 -07:00
i2c.h
common/i2c: Add I2C passthru_protect command
2016-05-24 19:23:27 -07:00
i8042_protocol.h
More supports for A20 enable/disable
2012-11-04 20:27:57 -08:00
inductive_charging.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
jtag.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_8042_sharedlib.h
libsharedobjs: Add 8042 scancodes to shared lib.
2015-07-17 03:18:03 +00:00
keyboard_8042.h
Add support for extra buttons not on the keyboard
2014-02-07 04:13:18 +00:00
keyboard_config.h
samus: change charge override hot keys to ctrl+search+0|1|2
2015-01-24 06:42:02 +00:00
keyboard_mkbp.h
cleanup: mkbp keyboard module
2013-10-30 23:10:13 +00:00
keyboard_protocol.h
8042: Add interface for handling off-matrix button changes
2014-02-07 04:13:14 +00:00
keyboard_raw.h
ectool: Support keyboard factory scanning
2016-04-01 00:21:35 -07:00
keyboard_scan.h
Refactored keyboard scan enable flag to allow for multiple disable reasons
2014-04-11 20:02:30 +00:00
keyboard_test.h
Move keyboard dimension and key constants to keyboard_config.h
2013-03-22 11:24:29 -07:00
lb_common.h
common: lightbar: put multiple commands under i2c_lock
2015-09-19 12:27:21 -07:00
led_common.h
lucid: add LED support
2015-12-22 21:07:25 -08:00
libsharedobjs.h
libsharedobjs: Add libsharedobjs.h.
2015-07-17 03:17:57 +00:00
lid_angle.h
Cyan: Added Clamshell/Tablet mode support
2015-08-10 20:42:18 +00:00
lid_switch.h
Split lid switch code out of switch.c to its own file
2013-04-02 14:12:57 -07:00
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
common: lightbar: Add histeresis to prevent flickering
2015-10-23 18:03:12 -07:00
link_defs.h
Deferred: Remove hard coded number of deferreds
2016-04-19 12:23:52 -07:00
lpc.h
skylake: set and clear wake masks in S0 <-> S0ix transitions
2016-02-10 12:44:15 -08:00
mag_cal.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat33.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat44.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
math_util.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
memory_commands.h
Initial sources import 2/3
2011-12-07 19:10:02 +00:00
mkbp_event.h
mkbp_event: Don't discard event source structures due to LTO
2016-05-25 22:55:43 -07:00
module_id.h
cr50: add basic rbox support
2016-04-29 16:07:13 -07:00
motion_lid.h
ectool: provide lid angle info
2015-11-25 18:15:38 -08:00
motion_sense.h
sensor: update sensor driver to use I2C port from motion_sensor_t
2016-03-31 21:35:56 -07:00
nvmem.h
Cr50: NvMem: Connected function stubs in /board/tpm2/NVMem.c
2016-05-26 18:08:57 -07:00
onewire.h
Clean up LED and onewire modules
2012-10-25 14:12:11 -07:00
panic.h
nds32: fix panic
2015-10-07 17:51:36 -07:00
peci.h
Switch temp sensor polling to use hooks instead of task
2012-11-01 12:45:22 -07:00
pmu_tpschrome.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
port80.h
mec1322: Change the Port 80 task to a timer IRQ.
2015-10-19 18:21:22 -07:00
power_button.h
cleanup: Fix signed vs unsigned typing
2016-02-03 21:34:47 -08:00
power_led.h
Replace generated CONFIG_TASK_ macros with HAS_TASK_
2013-04-24 16:32:58 -07:00
power.h
kunimitsu: hibernate: enable PseudoG3 support at board level
2016-02-18 17:35:16 -08:00
printf.h
Clean up printf module
2012-10-25 14:12:10 -07:00
producer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
pwm.h
pwm: Add PWM_CONFIG_DSLEEP config flag
2016-04-27 23:58:04 -07:00
queue_policies.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
queue.h
Queue: Add ability to modify contiguous units inplace
2015-07-15 21:57:36 +00:00
rsa.h
cleanup: Handle signed RW images a bit cleaner
2015-09-25 19:36:37 -07:00
sfdp.h
common: Fixes the SFDP_BITFIELD() macro.
2016-01-29 02:59:58 +00:00
sha1.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
sha256.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
shared_mem.h
Tidy shared memory module
2012-08-09 17:40:37 -07:00
smbus.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
software_panic.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
spi_flash_reg.h
Celes: Add define to support GD25Q41B for External EC ROM.
2015-09-15 19:17:53 -07:00
spi_flash.h
spi_flash: Add protect support for W25X40
2015-03-11 23:18:09 +00:00
spi_nor.h
common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver
2016-01-28 21:45:37 +00:00
spi.h
cr50: adds the SPI master driver
2015-12-21 14:58:54 -08:00
stack_trace.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
switch.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
system.h
Support RW_B in sysjump command when applicable
2016-04-08 12:34:29 -07:00
task_id.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
task.h
Don't declare functions inline that aren't always defined as such
2016-02-02 17:20:04 -08:00
temp_sensor_chip.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
temp_sensor.h
Include battery fuel gauge temp sensor in temperature sensors
2014-02-08 04:21:26 +00:00
test_util.h
host: mock i2c_xfer
2015-09-16 14:49:46 -07:00
thermal.h
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.h
Add more build conditions on x86-only code.
2014-08-10 18:39:24 +00:00
timer.h
Enforce compilation without system headers
2016-02-03 15:00:50 -08:00
tpm_registers.h
add command multiplexer to the TPM driver
2015-11-18 00:14:03 -08:00
trng.h
Enforce compilation without system headers
2016-02-03 15:00:50 -08:00
uart.h
UART: Remove enable/disable interrupt functions
2016-04-27 10:10:02 -07:00
usb_api.h
cr50: Detect debug cable and switch the PHY
2016-04-13 20:10:38 -07:00
usb_bb.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_charge.h
usb_charge: fix custom event mask
2015-09-11 13:51:07 -07:00
usb_console.h
update case closed debugging partial mode policy
2015-09-08 13:49:09 -07:00
usb_descriptor.h
servo_micro: add programmable serial number
2016-05-26 16:17:26 -07:00
usb_hid.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_mux.h
tcpc: add support for TCPC with integrated high-speed muxes
2016-01-27 14:52:18 -08:00
usb_pd_tcpc.h
tcpm: Add configuration struct for tcpc i2c params
2015-11-08 17:31:12 -08:00
usb_pd_tcpm.h
tcpm: update code to support multiple tcpm driver
2016-04-17 12:23:07 -07:00
usb_pd.h
Deferred: Use deferred_data instead of function pointer
2016-04-18 17:32:40 -07:00
util.h
CR50: remove dependence of assert.h on util.h
2016-05-25 18:51:07 -07:00
vboot_hash.h
vboot_hash: Abort hash calculation on flash write
2015-07-01 03:49:00 +00:00
vec3.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
vec4.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
zinger: change watchdog timeout to 1.8 second
2014-06-17 18:34:03 +00:00
wireless.h
Initial Glower commit
2015-01-20 20:56:43 +00:00