Add espi control module for it83xx.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. it8390+Intel SKL-Y RVP3 and boot to shell.
2. console command "kbpress 1 4" to test keyboard data.
(board code for espi module test on CL:392587)
Change-Id: I1b32bd16f7e01abf07b9c9a68ebef2399cc9828d
Reviewed-on: https://chromium-review.googlesource.com/394471
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Support protection of regions that aren't aligned to a power of 2 by
using two MPU entries, and taking advantage of the sub-region feature.
Also protect code RAM from being overwritten, on parts that use external
storage.
BUG=chromium:782244
BRANCH=None
TEST=On kevin, call:
mpu_protect_data_ram();
mpu_protect_code_ram();
mpu_enable();
Verify that first call results in the following update_region params:
addr: 0x200c2000 size: 0xc01d
Decoded: Protect 24K region
Verify that second call results in the following params:
addr: 0x100a8000 size: 0xc021
Decoded: Protect 96K region
addr: 0x100c0000 size: 0xf01b
Decoded: Protect remaining 8K region
Also verify that writes to beginning and end of code ram region trigger
data access violation after enabling protection.
Also verify that sysjump fails.
Change-Id: Ieb7a4ec3a089e8a2d29f231e1e3acf2e78e560a1
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/757721
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
With this change, we can pass "make buildall" at local
after it83xx based boards were removed from skip_boards.
BRANCH=none
BUG=none
TEST=- Passed "make buildall -j"
- CROSS_COMPILE_nds32=nds32le-cros-elf- make BOARD=it83xx_evb -j,
build ec image by using nds32le-cros-elf toolchain.
- make BOARD=it83xx_evb -j, coreboot-sdk is used.
Change-Id: I689b67ed50ac5c80e7526f157ba28733d7216e14
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/762807
Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
The original assembly code of deep sleep bypass will cause build error
if both CONFIG_LOW_POWER_IDLE and CONFIG_LTO are defined when buildiing
board glkrvp/zoombini. This CL fixed it by change the bypass assembly code
from:
asm ("push {r0-r5}\n"
"ldr r0, =0x100A8000\n"
"wfi\n"
"ldm r0, {r0-r5}\n"
"pop {r0-r5}\n"
"isb\n"
);
to:
asm ("push {r0-r5}\n"
"wfi\n"
"ldm %0, {r0-r5}\n"
"pop {r0-r5}\n"
"isb\n" :: "r" (0x100A8000)
);
BRANCH=none
BUG=none
TEST=No build errors for "make buildall".
TEST=build zoombini/glkrvp with CONFIG_LOW_POWER_IDLE and CONFIG_LTO,
no build errors.
TEST=build npcx7_evb/npcx_evb and do stress test for deep idle->wakeup
on EVB, no symptom observed.
Change-Id: I90b13b4baf418e3f4b3234d4811e3978b6436aac
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/756535
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
old_val may change value after cmpxchg, need to reset to 0 for next loop
comparison.
BUG=None
BRANCH=master
TEST=On Soraka modified for ISH board, running more than 4 hours sensor
data fetching by host command, and no problem.
Change-Id: I720230e196771071c8ba204458da6c4788d374ea
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/738914
Commit-Ready: Li1 Feng <li1.feng@intel.com>
Tested-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
A built-in function (__builtin_ffs) is missing after we sync down
the source code to latest.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=We use the CL:730246 to verify this change, and
no error was received after running the test.
Change-Id: I5210f85db05650545c9924940e8b24e350b82f71
Reviewed-on: https://chromium-review.googlesource.com/730245
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
NPCX5* only has one UART controller, which can be switched
between 2 pads. We keep the default pad for EC console,
however, we allow switching to the alternate pad for short,
infrequent, transactions. Both pads are assumed to use the
same baudrate and other line settings.
When switching pad, we first configure the new pad, then switch
off the old one, to avoid having no pad selected at a given time,
see b/65526215#c26.
Because of the added complexity of npcx_gpio2uart (and the fact
that it uses the global variable "pad" define in uart.c), we
move the implementation to uart.c (npcx_uart2gpio is also moved
for consistency).
When the pad is switched to alternate pad, characters input
and output on the EC console (default pad) would be lost. To
compensate for this, we:
- Switch back to main pad in case of EC panic, so that output
is shown on EC console.
- Immediately abort current alternate pad transaction if a
character is received on the default pad. Note, however,
that the first character will be lost (this can be worked
around by telling user to press enter, and have servod/FAFT
always send 2 blank lines (instead of just one) before
sending a command).
- Inhibit pad switching for 500ms after receiving a character
on default pad. Assuming a reasonable typing speed, this
should allow developers to type console commands relatively
comfortably, while not starving the alternate pad communication
for too long.
The logic above could be simplified significantly by implementing
software flow control (XON/XOFF, see b/67026316).
BRANCH=none
BUG=b:65526215
TEST=While follow-up CL that writes long 1k buffers, the following
works fine:
- type 'uart' in EC console
- Read battery power consumption from servod, which "types" in
the EC console:
while true; do dut-control ppvar_vbat_mw; sleep 1; done
no failure is seen.
TEST=Add this test code in uart_alt_pad_read_write, after the pad
has been switched, and check that panic information is
consistently printed correctly:
{
static int t;
if (t++ > 20)
t = t / ret;
}
Change-Id: I18feed2f8ca4eb85f40389f77dac3a46315310e7
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/659458
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Modules in board/cr50/tpm2 are part of the TPM task, and their .bss
segment needs to be wiped out along with other TPM modules' when TPM
is reset.
The only module from this directory which has static variables is
NVMem.c. This patch groups the variables into a structure, and makes
sure that the structure is stored in the part of .bss which is zeroed
when TPM is reset.
BRANCH=none
BUG=none
TEST=verified that TPM wipeout happening during RMA reset is
successful.
Change-Id: I5f80dc5e4f5f7cdce2d1a1ed59e0fbac354c5bf6
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/733814
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Scott Collyer <scollyer@chromium.org>
In order to prevent keeping the CSAE bit at 1 forever impacts the eSPI
performance, the npcx driver enables host access wakeup functionality
before ec enters deep sleep or wfi. But this bypass also should be added
in __idle() of core/cortex-m/task.c if CONFIG_LOW_POWER_IDLE is
disabled.
This CL also narrows the bypass only when host interface is eSPI.
BRANCH=eve
BUG=b:64730183
TEST=No build errors for make buildall. Disable CONFIG_LOW_POWER_IDLE
functionality on poppy and use following script "count=0; while :;
do echo "--- iteration --- $count"; time flashrom -p ec -r ec.bin; sleep
1; count=$((${count}+1)); done" to test eSPI performances over 300
times. No errors occur and all tests' efficiency are the same as
removing CSAE bypass.
Change-Id: I8b6b69e37318208c185747151c06b3e6bdfd2f4e
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/644967
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
CCD_CHANGE_HOOK should use CONFIG_CASE_CLOSED_DEBUG_V1.
All boards which use chip/g either use both CONFIG_USB_SERIALNO and
CONFIG_CASE_CLOSED_DEBUG or neither of them, so just depend on
CONFIG_USB_SERIALNO.
This is in preparation for making common/case_closed_debug refer only
to the usb_pd_protocol version (with mode=disabled/partial/enabled),
and cr50 will have its own version (with only enabled/disabled, and
tied more closely to CCD config).
No functionality changes.
BUG=none
BRANCH=cr50
TEST=make buildall -j; boot cr50 and see change hook called
Change-Id: I1985c8c48c1a85fed4549402a7b47b8a9cf135d7
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/648067
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
The way Cortex processors handle exceptions allows writing exception
routines directly in C, as return from exception is handled by providing
a special value for the link register.
However, it is not safe to do this when doing context switching. In
particular, C handlers may push some general-purpose registers that
are used by the handler and pop them later, even when context switch
has happened in the meantime. While the processor will restore {r0-r3}
from the stack when returning from an exception, the C handler code
may push, use and pop another register, such as r4.
It turns out that GCC 4.8 would generally only use r3 in svc_handler and
pendsv_handler, but newer versions tend to use r4, thus clobbering r4
that was restored from the context switch and leading up to a fault
when r4 is used by the task code.
An occurrence of this behaviour takes place with GCC > 4.8 in __wait_evt,
where "me" is stored in r4, which gets clobbered after an exception
triggers pendsv_handler. The exception handler uses r4 internally, does
a context switch and then restores the previous value of r4, which is
not restored by the processor's internal, thus clobbering r4.
This ends up with the following assertion failure:
'tskid < TASK_ID_COUNT' in timer_cancel() at common/timer.c:137
For this reason, it is safer to have assembly routines for exception
handlers that do context switching.
BUG=chromium:631514
BRANCH=None
TEST=Build and run speedy EC with a recent GCC version
Change-Id: Ib068bc12ce2204aee3e0f563efcb94f15aa87013
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://chromium-review.googlesource.com/362830
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
For system using core/minute-ia, build will fail since __image_size is
not defined. If later this variable is used, should adjust its value
properly.
BUG=none
BRANCH=None
TEST=Build passed for Soarka ISH which uses core/minute-ia.
Change-Id: I8e179e0bac551a46d93ca10ba8b61b4ebade74fc
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/595151
Commit-Ready: Li1 Feng <li1.feng@intel.com>
Tested-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch defines CONFIG_DATA_RAM_SIZE, which indicates the size
of the RAM used for data, thus can be marked as non-executable.
If it's not defined, it defaults to CONFIG_RAM_SIZE. Thus, other chips
are not affected.
BUG=b:36037354
BRANCH=none
TEST=buildall. Run 'sysjump disable' on Reef and verify mpu_protect_ram
is successful.
Change-Id: I54d74fd1dabff7e1013fff2542fd02c3646803d1
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/596518
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds the CCD configuration module, and the console commands to
control it. It is not wired up to any of the CCD capabilities; that's
coming in the next CL.
Briefly:
* CCD configuration is persistently stored in nvmem_vars. Use ccdinfo to
print it.
* CCD can be Locked, Unlocked (some capabilities), or Opened
(all capabilities), using the ccdlock / ccdunlock / ccdopen commands.
* CCD config can be restricted by setting a password via ccdpass.
* Individual config capabilities can be set via ccdset. Some of those will
be used to gate access to things like write protect and UARTs. Others
affect the requirements for ccdunlock / ccdopen (for example, is physical
presenc required).
* The entire config can be reset via ccdreset. If only unlocked, config
that is restricted to Opened is not reset.
* If CR50_DEV=1, ccdoops will force-reset and open the config.
See go/cr50-ccd-wp for more information.
BUG=b:62537474
BRANCH=none
TEST=manual with CR50_DEV=1 build
gpioget # make sure GPIO_BATT_PRES_L=0
ccdlock # lock, because CR50_DEV=1 builds start unlocked
ccdinfo # locked, flags=0, all capabilities default
ccdpass # access denied (we're locked)
ccdreset # access denied
ccdset flashap always # access denied
ccdunlock
ccdinfo # unlocked
ccdpass foo
ccdinfo # flags=2 (password set when unlocked)
ccdset flashap always # access denied
ccdset uartectx unlesslocked
ccdinfo # yes, uartectx permission changed
ccdlock
ccdunlock # fails without password
ccdunlock bar # wrong password
ccdunlock foo # busy
(wait 3 sec)
ccdunlock foo
ccdreset
ccdinfo # no password, flags 0, capabilities all default
ccdopen # requires physical presence; tap power or use 'pp'
ccdset uartectx unlesslocked
ccdset batterybypasspp ifopened
ccdpass baz
ccdinfo # password set, flag 0, ccdset changes worked
ccdunlock
ccdreset
ccdinfo # uartectx back to ifopened, password still set
ccdopen baz # still requires physical presence
ccdset opennolongpp always
ccdlock
ccdopen baz # no pp required
ccdset unlocknoshortpp unlesslocked
ccdlock
ccdopen baz # short pp sequence required (3 taps)
ccdlock
ccdunlock baz # short pp sequence required
ccdopen baz # pp not required
ccdset unlocknoshortpp always
ccdlock
testlab open # access denied
testlab enable # access denied
ccdunlock baz
testlab open # access denied
testlab enable # access denied
ccdopen baz
testlab enable # requires short pp
ccdinfo # flags 1
ccdreset
ccdinfo # no password, flags=1, caps all default
ccdlock
testlab open
ccdinfo # opened
testlab disable # requires short pp; let it time out
ccdinfo # still opened, flags=1
ccdlock
ccdoops # backdoor in CR50_DEV images to force-reset CCD
ccdinfo # opened, flags=0, all defaults (yes, oops wipes out testlab)
ccdreset rma
ccdinfo # flags = 0x400000, everything but Cr50FullConsole always
ccdreset # back to flags=0, all default
Change-Id: I24e8d8f361874671e6e94f27492ae00db919bea9
Reviewed-on: https://chromium-review.googlesource.com/569439
Commit-Ready: Randall Spangler <rspangler@chromium.org>
Tested-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Instead of having to pass in both the board and the arch used there
(which might be complicated in the light of different ECs with different
arches), allow passing in the board and a set of cross compilers.
The core/*/build.mk then pick the compiler that is responsible for them.
The current method works just the same: If you've already set
CROSS_COMPILE, no override happens. If you set neither CROSS_COMPILE nor
CROSS_COMPILE_$arch, the same default as before this CL is set.
BUG=none
BRANCH=none
TEST=emerge-{samus,kevin} chromeos-ec behave reasonably with adapted
ebuild
Change-Id: Icf1866f296412dd92ecfe134394224c49f7c3df5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/549344
Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Remove code related to DH_SWAP_BY_POINTERS and
DH_REPLACE_LAST_THREE_LADDERSTEPS_WITH_DOUBLINGS, as they are
not really worth it (code size increase of 60/100 bytes respectively
for 1000/500 us time gain).
BRANCH=none
BUG=b:62813194
TEST=make BOARD=hammer PROJECT=x25519 TEST_BUILD=y
./util/flash_ec --board=hammer --image=build/hammer/x25519.bin
EC console: runtest, taskinfo
Change-Id: If21948bb2c7c20f97ba8b321dd2688cd3d0ba74a
Reviewed-on: https://chromium-review.googlesource.com/554440
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
- Move generic implementation to curve25519-generic.o
- Always use optimized version on cortex-m0.
- Rename .s files to .S, remove unnecessary lines in assembly files.
- Rename crypto_scalarmult_curve25519 to x25519_scalar_mult to match
the signature provided by the generic implementation.
- Replace some handcoded memcpy with function calls
- Remove unnecessary "volatile" specifications in the code.
BRANCH=none
BUG=b:62813194
TEST=To test old implementation only:
- Increase CONFIG_RO_SIZE to 60kb
- Increase console stack size to 2048
make BOARD=hammer PROJECT=x25519 TEST_BUILD=y
./util/flash_ec --board=hammer --image=build/hammer/x25519.bin
EC console: runtest, taskinfo
=> Used to takes ~4'17" to run (X25519 duration 256347 us).
1496/2048 stack size usage in CONSOLE task
=> Now takes ~1'25" to run (X25519 duration 84520 us)
732/2048 stack size usage in CONSOLE task
TEST=In test/x25519.c, uncomment #define TEST_X25519_1M_ITERATIONS
make BOARD=hammer PROJECT=x25519 TEST_BUILD=y
./util/flash_ec --board=hammer --image=build/hammer/x25519.bin
EC console: runtest, wait ~23 hours, test passes.
TEST=- Define CONFIG_CURVE25519_CORTEXM0 (next patch)
makes newsizes
build/hammer/RW/ec.RW.flat shrank by 1888 bytes: (52208 to 50320)
Change-Id: Icce38d3c32f431a85ac0f951cf34456b490dc665
Reviewed-on: https://chromium-review.googlesource.com/540962
Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
We need to add a few library routines for sensor task.
Routines added are taken from nds32's library.
BRANCH=none
BUG=none
TEST=Add sensor task to reef_it8320 board.
Test screen rotation functionality on reef_it8320.
Change-Id: I2eee33f897b38e05bddd30b16f875944259b2c0d
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/527537
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Until HOOK_INIT has completed, do not allow any tasks other than HOOKS
or IDLE to be scheduled. Programmers often make the assumption that
a HOOK_INIT function is guaranteed to be run before task code that depends
on it, so let's make it so.
BUG=chromium:649398
BRANCH=None
TEST=Manual on kevin, compare boot without patch:
...
[0.004 power state 0 = G3, in 0x0008] <-- from chipset task
RTC: 0x00000000 (0.00 s)
[0.004 power state 4 = G3->S5, in 0x0008]
RTC: 0x00000000 (0.00 s)
[0.005 clear MKBP fifo]
[0.006 clear MKBP fifo]
[0.006 KB init state: ... <-- from keyscan task
[0.012 SW 0x05]
[0.155 hash start 0x00020000 0x00019a38]
[0.158 HOOK_INIT DONE!]
... to boot with patch:
...
RTC: 0x58cc614c (1489789260.00 s)
[0.004 clear MKBP fifo]
[0.005 clear MKBP fifo]
[0.010 SW 0x05]
[0.155 hash start 0x00020000 0x000198e0]
[0.157 HOOK_INIT DONE!]
...
Also, verify kevin boots to OS and is generally functional through
sysjump and basic tasks, and verify elm (stm32f0 / cortex-m0) boots.
Change-Id: If56fab05ce9b9650feb93c5cfc2d084aa281e622
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/456628
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Cortex-M4 supports a floating point square root function that takes 14
cycles to execute, which is a speed improvement over the existing binary
search, and saves flash space.
BUG=chromium:687624
BRANCH=None
TEST=On kevin, verify that both sqrtf methods (binary search vs HW
instruction) have identical results for fractional input (eg.
sqrt(15.999999) = 3), except when floating point representation of
square root rounds up to an integer. Verify identical results for all
integers [-100, 16793602). Note that 16793602 is the first integer for
which the floating point representation of sqrt rounds up to an integer.
Also verify basic motion sense functions on kevin.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I8521c9a28c958b340ca83c37342253e424df0c91
Reviewed-on: https://chromium-review.googlesource.com/537734
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Because N8 CPU doesn't have floating point unit,
so we implement an extra floating point engine
(single-precision addition, subtraction, multiplication,
and division) into it8320 to improve performance of
floating point operation.
To make CPU's instruction compatible, we use register (DLMB)
to switch ALU (Arithmetic Logic Unit). eg:
Instruction 'ADD45' adds the contents of two registers then
writes the result to the source register.
But if we switch ALU to floating point operation mode,
this instruction will do a floating-point addition instead.
For the other FPU that we don't support as far,
we have to use soft float library routines of nds32.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=add the following console command and test different
scenarios by changing variable a and b.
#define PRINTF_FLOAT(x) ((int)((x) * 1000.0f))
static int it83xx_fpu_test(int argc, char **argv)
{
volatile float a = 1.23f;
volatile float b = 4.56f;
volatile float c;
c = a + b;
ccprintf("__addsf3: (%d)\n", PRINTF_FLOAT(c));
c = a - b;
ccprintf("__subsf3: (%d)\n", PRINTF_FLOAT(c));
c = a * b;
ccprintf("__mulsf3: (%d)\n", PRINTF_FLOAT(c));
c = a / b;
ccprintf("__divsf3: (%d)\n", PRINTF_FLOAT(c));
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(fpu, it83xx_fpu_test, "", "");
Change-Id: I4fc1c08d8c2376156bec9f098491187675c4a88f
Reviewed-on: https://chromium-review.googlesource.com/427640
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
This CL implements two methods for hibernating on npcx7 ec. One is using
PSL (Power Switch Logic) circuit to cut off ec's VCC power rail. The
other is turning off the power of all ram blocks except the last code
ram block. In order to make sure hibernate utilities are located in the
last code ram block and work properly, we introduce a new section called
'after_init' in ec.lds.S.
We also moved the hibernate utilities, workarounds for sysjump and so on
which are related to chip family into system-npcx5/7.c. It should be
easier to maintain.
It also includes:
1. Add CONFIG_HIBERNATE_PSL to select which method is used on npcx7 for
hibernating.
2. Add new flag GPIO_HIB_WAKE_HIGH to configure the active priority of
wake-up inputs during hibernating.
3. Add DEVICE_ID for npcx796f.
BRANCH=none
BUG=none
TEST=No build errors for all boards using npcx5 series.
Build poppy board and upload FW to platform. No issues found. Make
sure AC_PRESENT and POWER_BUTTON_L can wake up system from
hibernate. Passed hibernate tests no matter CONFIG_HIBERNATE_PSL is
enabled or not on npcx796f evb.
Change-Id: I4e045ebce4120b6fabaa582ed2ec31b5335dfdc3
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/493006
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Image used size is now part of the image_data struct present in all
images at a fixed offset, so use it rather than scanning from the end of
the image.
BUG=chromium:577915
TEST=Verify on kevin + lars + lars_pd that system_get_image_used() returns
the same value as the old implementation, for both RO and RW images.
BRANCH=None
Change-Id: I35f0aa87f5ab1371dbd8b132f22b9d0044358223
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/450859
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Store our image size (known at build time) in our version struct (now
renamed to image_data). This will allow us to more efficiently determine
the size of an image in a follow-up CL.
Note that compatibility is broken for old ROs that do not include this
CL.
BUG=chromium:577915
TEST=Verify on kevin + lars + lars_pd that stored image size matches
output of system_get_image_used() for both RO and RW images.
BRANCH=None
Change-Id: I7b8dc3ac8cf2df3184d0701a0e0ec8032de8d81b
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/450858
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This marks decriptor length as byte accurate, by
aligning the "__usb_desc_end" label by byte rather
than short or word.
BUG=chrome-os-partner:62873
TEST=servo_v4 doesn't crash adb anymore
BRANCH=None
Change-Id: I643bae2c59e81ce0c03d9026f4a5d7933ba4c891
Reviewed-on: https://chromium-review.googlesource.com/442012
Commit-Ready: Nick Sanders <nsanders@chromium.org>
Tested-by: Nick Sanders <nsanders@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
All boards have been transitioned to charge_state_v2.c
So charge_state_v1.c, HOOK_CHARGE_STATE_CHANGE, and
CONFIG_CHARGER_TIMEOUT_HOURS can be removed
BUG=chrome-os-partner:36272
TEST=make -j buildall
BRANCH=none
Change-Id: I3f20c5198ea75185f9894deb792575a1be31432a
Reviewed-on: https://chromium-review.googlesource.com/435467
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Image used size is now part of the image_data struct present in all
images at a fixed offset, so use it rather than scanning from the end of
the image.
BUG=chromium:577915
TEST=Verify on kevin + lars + lars_pd that system_get_image_used() returns
the same value as the old implementation, for both RO and RW images.
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ic8db5c706d82f7ca2ded2e90129747e7fbefdb38
Reviewed-on: https://chromium-review.googlesource.com/427959
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Store our image size (known at build time) in our version struct (now
renamed to image_data). This will allow us to more efficiently determine
the size of an image in a follow-up CL.
Note that compatibility is broken for old ROs that do not include this
CL.
BUG=chromium:577915
TEST=Verify on kevin + lars + lars_pd that stored image size matches
output of system_get_image_used() for both RO and RW images.
BRANCH=None
Change-Id: I49ea5fc27a7f11f66daba485a87d0dfe7d0c770f
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/427408
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The magnetometer online calibration requires these two
functions and taken from newlib.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=fabsf():
fabsf(1.23) = 1.23
fabsf(-1.23) = 1.23
sqrtf():
sqrtf(4.56) = 2.135
sqrtf(0.123) = 0.350
sqrtf(-0.123) = an exception is triggered.
Change-Id: I808ca7f1bd03c6d6c1b32861ede4ecbfeeaa3da6
Reviewed-on: https://chromium-review.googlesource.com/429730
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
change inline assembly for fsqrt and fabs
BUG=none
BRANCH=None
TEST=`make buildall -j`
1. Compare sqareroot(2) from calculator and from sqrtf(2.0f) by multiplying
1.0 x 10E8 for both values to convert int32_t and check the difference.
2. read timestampt before and after 'sqrtf()' and calculate execution
time.
Change-Id: I62694d8b084a3a74040dc298354b4fd685e77729
Signed-off-by: Kyoung Kim <kyoung.il.kim@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/404927
Commit-Ready: Kyoung Il Kim <kyoung.il.kim@intel.com>
Tested-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
Use binary search in host command lookup dispatcher
BUG=chromium:570895
TEST=manual testing on kevin
- Kevin boots
- ectool hello
make buildall -j
Verify *.smap hcmds section is sorted:
BOARD with host commands and private host commands
0004d0ec R __hcmds
0004d0ec R __host_cmd_0x00000x0000
0004d0f8 R __host_cmd_0x00000x0001
0004d104 R __host_cmd_0x00000x0002
0004d110 R __host_cmd_0x00000x0003
0004d11c R __host_cmd_0x00000x0004
0004d128 R __host_cmd_0x00000x0005
0004d134 R __host_cmd_0x00000x0007
0004d140 R __host_cmd_0x00000x0008
0004d14c R __host_cmd_0x00000x000a
0004d158 R __host_cmd_0x00000x000d
0004d164 R __host_cmd_0x00000x0010
0004d170 R __host_cmd_0x00000x0011
0004d17c R __host_cmd_0x00000x0012
0004d188 R __host_cmd_0x00000x0013
0004d194 R __host_cmd_0x00000x0015
0004d1a0 R __host_cmd_0x00000x0016
0004d1ac R __host_cmd_0x00000x0017
0004d1b8 R __host_cmd_0x00000x0087
0004d1c4 R __host_cmd_0x00000x008c
0004d1d0 R __host_cmd_0x00000x008f
0004d1dc R __host_cmd_0x00000x0092
0004d1e8 R __host_cmd_0x00000x0093
0004d1f4 R __host_cmd_0x00000x0097
0004d200 R __host_cmd_0x00000x0098
0004d20c R __host_cmd_0x00000x00b6
0004d218 R __host_cmd_0x00000x00d2
0004d224 R __host_cmd_0x00000x00d3
0004d230 R __host_cmd_0x3E000x0000
0004d23c R __host_cmd_0x3E000x0002
0004d248 R __evt_src_EC_MKBP_EVENT_HOST_EVENT
0004d248 R __hcmds_end
BOARD with host commands only
100bc888 R __hcmds
100bc888 R __host_cmd_0x00000x0000
100bc894 R __host_cmd_0x00000x0001
100bc8a0 R __host_cmd_0x00000x0002
100bc8ac R __host_cmd_0x00000x0003
100bc8b8 R __host_cmd_0x00000x0004
100bc8c4 R __host_cmd_0x00000x0005
100bc8d0 R __host_cmd_0x00000x0006
100bc8dc R __host_cmd_0x00000x0007
100bc8e8 R __host_cmd_0x00000x0008
100bc8f4 R __host_cmd_0x00000x0009
100bc900 R __host_cmd_0x00000x000a
100bc90c R __host_cmd_0x00000x000b
100bc918 R __host_cmd_0x00000x000d
100bc924 R __host_cmd_0x00000x0010
100bc930 R __host_cmd_0x00000x0011
100bc93c R __host_cmd_0x00000x0012
100bc948 R __host_cmd_0x00000x0013
100bc954 R __host_cmd_0x00000x0015
100bc960 R __host_cmd_0x00000x0016
100bc96c R __host_cmd_0x00000x0017
100bc978 R __host_cmd_0x00000x0025
100bc984 R __host_cmd_0x00000x0026
100bc990 R __host_cmd_0x00000x0029
100bc99c R __host_cmd_0x00000x002a
100bc9a8 R __host_cmd_0x00000x002b
100bc9b4 R __host_cmd_0x00000x002c
100bc9c0 R __host_cmd_0x00000x0044
100bc9cc R __host_cmd_0x00000x0045
100bc9d8 R __host_cmd_0x00000x0046
100bc9e4 R __host_cmd_0x00000x0047
100bc9f0 R __host_cmd_0x00000x0061
100bc9fc R __host_cmd_0x00000x0062
100bca08 R __host_cmd_0x00000x0064
100bca14 R __host_cmd_0x00000x0065
100bca20 R __host_cmd_0x00000x0067
100bca2c R __host_cmd_0x00000x0087
100bca38 R __host_cmd_0x00000x008c
100bca44 R __host_cmd_0x00000x008d
100bca50 R __host_cmd_0x00000x008f
100bca5c R __host_cmd_0x00000x0092
100bca68 R __host_cmd_0x00000x0093
100bca74 R __host_cmd_0x00000x0096
100bca80 R __host_cmd_0x00000x0097
100bca8c R __host_cmd_0x00000x0098
100bca98 R __host_cmd_0x00000x0099
100bcaa4 R __host_cmd_0x00000x009e
100bcab0 R __host_cmd_0x00000x00a0
100bcabc R __host_cmd_0x00000x00a1
100bcac8 R __host_cmd_0x00000x00a8
100bcad4 R __host_cmd_0x00000x00a9
100bcae0 R __host_cmd_0x00000x00b6
100bcaec R __host_cmd_0x00000x00b7
100bcaf8 R __host_cmd_0x00000x00d2
100bcb04 R __host_cmd_0x00000x00d3
100bcb10 R __host_cmd_0x00000x00db
100bcb1c R __host_cmd_0x00000x0101
100bcb28 R __host_cmd_0x00000x0102
100bcb34 R __host_cmd_0x00000x0103
100bcb40 R __host_cmd_0x00000x0104
100bcb4c R __host_cmd_0x00000x0110
100bcb58 R __host_cmd_0x00000x0111
100bcb64 R __host_cmd_0x00000x0112
100bcb70 R __host_cmd_0x00000x0113
100bcb7c R __host_cmd_0x00000x0114
100bcb88 R __host_cmd_0x00000x0115
100bcb94 R __host_cmd_0x00000x0116
100bcba0 R __host_cmd_0x00000x0117
100bcbac R __host_cmd_0x00000x0118
100bcbb8 R __host_cmd_0x00000x011a
100bcbc4 R __evt_src_EC_MKBP_EVENT_KEY_MATRIX
100bcbc4 R __hcmds_end
BRANCH=none
Change-Id: I5d13d2a7fe7fa9a0fbeed43177cc612f572a58bb
Reviewed-on: https://chromium-review.googlesource.com/419702
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
- Before the change was made, the "__ro_end" was at 00013520h.
We change to 00012760h.
- Rename "CONFIG_IT83XX_ILM_BLOCK_SIZE" to "IT83XX_ILM_BLOCK_SIZE"
this is because we don't support reconfiguration at board-level.
- Put some task functions into "__ram_code" section to
fill the gap and improving performance of code-fetch.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=console commands: flasherase, flashwrite, and flashread.
Change-Id: I2f2906a2a0b6971aadd00120c282801161447808
Reviewed-on: https://chromium-review.googlesource.com/424248
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If there's a task switching occurred between loading waiter and
unlocking the lock, the task with higher priority won't wake up since
the local variable, waiter, doesn't contain its ID bit before task
switching. In this situation, the higher priority task only can be
awakened when the other tasks execute mutex_unlock() again.
But consider the following conditions: (For example, the driver of
charger bd9995x.)
1. There are more than one mutex for the usage path of i2c port.
2. There are more than one task access this usage path of i2c port and
one of these tasks, task A, met the situation above.
3. The other tasks have no chance to execute mutex_unlock() of i2c since
the task A still occupied the mutex of charger.
All the tasks used the same i2c port or the other hardware will sleep
forever. This CL makes loading waiter and unlocking the lock as atomic
to solve this issue.
BRANCH=none
BUG=chrome-os-partner:60617
TEST=make BOARD=snappy; make BOARD=oak; Executed charger factory test on
4 units of snappy for 3 days and no symptom occurred.
Change-Id: Id976fc47955b33ca83bb2182b197d9f2781c341b
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/423285
Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We use the latest nde32 official toolchain to verify the bug of
GP-related instruction was fixed (we can remove "-mno-gp-direct" flag to
save code space), and code optimization.
We got some error on official toolchain, so we fix them as well:
- "break" instead of "trap".
N8 CPU does not support "trap" instruction to generate an unconditional
trap exception, but no error occurred while compiling by using current
GCC toolchain (this will trigger a reserved instruction exception,
so "ASSERT()" still work).
We use "break" to generate a exception in this change.
- "li" instead of "la".
To fix the error: "Error: la must use with symbol".
Also fix:
- The "_bss_start" has to be word-aligned because we use "lwi" instruction
to load a word from the memory into the general register.
BRANCH=none
BUG=none
TEST=1. console command "crash assert".
2. check registers settings: f02030h, f0203eh, and f02044h.
Change-Id: I33404a1d60eeebfa135bf43d3a7d5e73ab35c678
Reviewed-on: https://chromium-review.googlesource.com/422608
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
This reverts commit c459c8278e
as the fix is not straightforwad, some host command codes in
private repos are expressed using C preprecessor which
breaks the assumption of this patch that all host commands
are expressed as four digit hex numbers.
Change-Id: I922de9ae8dbab6eef048463c5c09b1f338152083
Reviewed-on: https://chromium-review.googlesource.com/414492
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Use binary search in host command lookup dispatcher
BUG=chrome-os-partner:570895
TEST=manual testing on kevin
- Kevin boots
- ectool hello
make buildall -j
Verify *.smap hcmds section is sorted:
100bca94 R __hcmds
100bca94 R __host_cmd_0x0000
100bcaa0 R __host_cmd_0x0001
100bcaac R __host_cmd_0x0002
100bcab8 R __host_cmd_0x0003
100bcac4 R __host_cmd_0x0004
100bcad0 R __host_cmd_0x0005
100bcadc R __host_cmd_0x0006
100bcae8 R __host_cmd_0x0007
100bcaf4 R __host_cmd_0x0008
100bcb00 R __host_cmd_0x0009
100bcb0c R __host_cmd_0x000a
100bcb18 R __host_cmd_0x000b
100bcb24 R __host_cmd_0x000d
100bcb30 R __host_cmd_0x0010
100bcb3c R __host_cmd_0x0011
100bcb48 R __host_cmd_0x0012
100bcb54 R __host_cmd_0x0013
100bcb60 R __host_cmd_0x0015
100bcb6c R __host_cmd_0x0016
100bcb78 R __host_cmd_0x0017
100bcb84 R __host_cmd_0x0025
100bcb90 R __host_cmd_0x0026
100bcb9c R __host_cmd_0x0029
100bcba8 R __host_cmd_0x002a
100bcbb4 R __host_cmd_0x002b
100bcbc0 R __host_cmd_0x002c
100bcbcc R __host_cmd_0x0044
100bcbd8 R __host_cmd_0x0045
100bcbe4 R __host_cmd_0x0046
100bcbf0 R __host_cmd_0x0047
100bcbfc R __host_cmd_0x0061
100bcc08 R __host_cmd_0x0062
100bcc14 R __host_cmd_0x0064
100bcc20 R __host_cmd_0x0065
100bcc2c R __host_cmd_0x0067
100bcc38 R __host_cmd_0x0087
100bcc44 R __host_cmd_0x008c
100bcc50 R __host_cmd_0x008d
100bcc5c R __host_cmd_0x008f
100bcc68 R __host_cmd_0x0092
100bcc74 R __host_cmd_0x0093
100bcc80 R __host_cmd_0x0096
100bcc8c R __host_cmd_0x0097
100bcc98 R __host_cmd_0x0098
100bcca4 R __host_cmd_0x0099
100bccb0 R __host_cmd_0x009e
100bccbc R __host_cmd_0x00a0
100bccc8 R __host_cmd_0x00a1
100bccd4 R __host_cmd_0x00a8
100bcce0 R __host_cmd_0x00a9
100bccec R __host_cmd_0x00b6
100bccf8 R __host_cmd_0x00b7
100bcd04 R __host_cmd_0x00d2
100bcd10 R __host_cmd_0x00d3
100bcd1c R __host_cmd_0x00db
100bcd28 R __host_cmd_0x0101
100bcd34 R __host_cmd_0x0102
100bcd40 R __host_cmd_0x0103
100bcd4c R __host_cmd_0x0104
100bcd58 R __host_cmd_0x0110
100bcd64 R __host_cmd_0x0111
100bcd70 R __host_cmd_0x0112
100bcd7c R __host_cmd_0x0113
100bcd88 R __host_cmd_0x0114
100bcd94 R __host_cmd_0x0115
100bcda0 R __host_cmd_0x0116
100bcdac R __host_cmd_0x0117
100bcdb8 R __host_cmd_0x0118
100bcdc4 R __host_cmd_0x011a
100bcdd0 R __evt_src_EC_MKBP_EVENT_KEY_MATRIX
100bcdd0 R __hcmds_end
BRANCH=none
Change-Id: Ideb9951b318763f71915e2c4e5052f4b4bfab173
Reviewed-on: https://chromium-review.googlesource.com/405528
Commit-Ready: Sam Hurst <shurst@google.com>
Tested-by: Sam Hurst <shurst@google.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
When "make buildall" has board which uses core/minute-ia,
CROSS_COMPILE?=i686-pc-linux-gnu- doesn't get set unless
CROSS_COMPILE is not defined; however, it's defined before
this line, and wrong toolchain is used.
Remove "?" to set correct CROSS_COMPILE.
BUG=none
BRANCH=none
TEST='make buildall -j' passed
Change-Id: Ied4a9f93a4d44714c012d3a3e50e4a34f41a7c1f
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/410402
Commit-Ready: Li1 Feng <li1.feng@intel.com>
Tested-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
