During the resume sequence of S0ix EC can receive host commands early
in the resume path when LPC is still disabled in EC. Host messages
will be lost if the LPC interface with the kernel is down.
Clock control was programed to 2 which means ring oscillator is
shut down after completion of everty LPC transaction.To restart
the oscillator EC should enable a wake interrupt on LPC LFRAME number
and this mode can cause an increase in the time to
respond to the LPC transactions.
Keeping LPC always on shows minimal power impact as per datasheet
Pg.390. The impact is < 0.45mW.
BUG=chrome-os-partner:50627
TEST=Enter into S0ix and exit reliably.
BRANCH=firmware-glados-7820.B
Change-Id: I670b9b45c3a85c9bca249312a73a25dca52b313a
Signed-off-by: Divya Jyothi <divya.jyothi@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/332333
Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit c03fd6e0eaa6ecd3205214f901facb9896a798b4)
Reviewed-on: https://chromium-review.googlesource.com/332791
Since npcx5m6g has larger than 128 KB code ram for FW, the original
alignment between RO & RW regions isn't suitable for new chip.
Therefore, we add 256KB alignment of them for npcx5m6g.
In order to program the flash used by npcx5m6g, we add new board array,
BOARDS_NPCX_5M6G_JTAG, in flash_ec to distinguish which flash layout
ec used. In npcx_cmds.tcl, add new script funcs such as flash_npcx5m5g
and flash_npcx5m6g to program flash with different layout.
Modified sources:
1. config_flash_layout.h: Add 256KB alignment of RO & RW regions for
npcx5m6g.
2. util/flash_ec: Add new board array, BOARDS_NPCX_5M6G_JTAG, to
distinguish which flash layout ec used.
3. openocd/npcx_cmds.tcl: Add new script funcs to program flash with
different layout.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I0ace31d96d6df2c423b66d508d30cefb0b82ed6c
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/331903
Reviewed-by: Shawn N <shawnn@chromium.org>
Add a usb endpoint and class for i2c control via USB.
Used for servo micro and servo_v4 to export USB control
through servod.
BUG=chromium:571477
BRANCH=None
TEST=updated servod is able to control gpio extender on servo_micro
Signed-off-by: Nick Sanders <nsanders@google.com>
Change-Id: Id44096f8c9e2da917c0574d28dfcbcc0adf31950
Reviewed-on: https://chromium-review.googlesource.com/329322
Commit-Ready: Nick Sanders <nsanders@chromium.org>
Tested-by: Nick Sanders <nsanders@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
It turns out TRNG could turn idle under certain circumstances, and
needs to be restarted in that case. This code adds a check for the
idle state and necessary recovery.
BRANCH=none
BUG=b:27646393
TEST=none yet
Change-Id: Ibd0a13f40f5ce081d4211b2c0f1026468967f826
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/332573
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
CONFIG_SHI ("SPI host interface") has identical meaning to
CONFIG_HOSTCMD_SPS ("Accept EC host commands over the SPI slave"). Use
CONFIG_HOSTCMD_SPS, since it came first and is already defined in config.h.
BUG=chrome-os-partner:50819
BRANCH=None
TEST=`make buildall -j`
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I665c405ad72caa3b84e583a80c0893e4c625632a
Reviewed-on: https://chromium-review.googlesource.com/331342
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
reverse() swaps the endian-ness of a buffer of
specified length. This change moves the implementation
to a common location.
BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
TEST=compilation succeeds
Change-Id: If8c97f53cc199d63c1caebbd999e1c099814387e
Signed-off-by: nagendra modadugu <ngm@google.com>
Reviewed-on: https://chromium-review.googlesource.com/331333
Commit-Ready: Nagendra Modadugu <ngm@google.com>
Tested-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
In order to support 256 KB ram version of npcx ec, we add CHIP_VARIANT
variant to distinguish which verson ec is.
In config_chip.h, we use CHIP_VARIANT to specify the size and start address
of program memory. Ecst tool also needs a chip parameter to make sure
the address range checking of entry pointer won't fail.
Modified sources:
1. config_chip.h: Use CHIP_VARIANT to specify the different hardware spec
of npcx ec.
2. config_flash_layout.h: Replace constant value with
CONFIG_PROGRAM_MEMORY_SIZE for CONFIG_RO_SIZE.
3. build.mk: Add -chip parameter for ecst tool to check entry address.
4. npcx_evb\build.mk: Add CHIP_VARIANT definition (npcx5m5g).
5. npcx_evb_arm\build.mk: Add CHIP_VARIANT definition (npcx5m5g).
6. wheatley\build.mk: Add CHIP_VARIANT definition (npcx5m5g).
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I1b8b9b9d0a59bdc01210f498ac67e4a342743b47
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/330072
Tested-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-by: Kevin K Wong <kevin.k.wong@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Add 1.8V IO support for some GPIOs and I2C pins. We use a array
(gpio_lvol_table) to confine which IO pins can switch to 1.8V. Before
setting it to support low voltage level, FW should set IO pin's type to
open-drain and disable internal pulling up or down.
We also add examples in gpio.inc of npcx_evb and npcx_evb_arm to indicate
how to set GPIO & I2C pins to 1.8V if user adds CONFIG_TEST_1P8V definition
in board.h.
In i2c.c driver, this version removes the internal pull-up feature of
i2c ports since the driving force is too weak. (about 30K ohm)
Modified sources:
1. gpio.c: Add 1.8V IO support for some GPIOs and I2C pins.
2. i2c.c: Remove internal pull-ups feature for i2c pins and move 1.8V
support to gpio.c.
3. register.h: Modified NPCX_LV_GPIO_CTL register & bits definitions.
4. npcx_evb\gpio.inc: Add examples of 1.8V IO.
5. npcx_evb_arm\gpio.inc: Add examples of 1.8V IO.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I73a840ae321820212e50d609dab17576117a7d64
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/330037
Reviewed-by: Shawn N <shawnn@chromium.org>
Flash writes must have starting offsets and byte lengths that are
multiples of 4 bytes. This requirement is already covered. One
additional requirement is that a batch write not cross a flash
block boundary. Added a check in flash_physical_write() to check
if this boundary would be crossed and if so to reduce the write
size so that it ends at the block boundary.
BUG=chrome-os-partner:44745
BRANCH=none
TEST=manual
Used the TPM NVMem section and executed flash writes/reads using
a console command utility that I created to test NVMem accesses.
Note that the console output only exists in the console command
related functions.
This test has the offset 12 bytes from the block boundary and
64 bytes long. The counting pattern shows that the write fills the
last 12 bytes, then moves to the next block as expected.
> nvmem wr 0xff4 0x40 3
nvmem wr: o = ff4, s = 64|0x40
start = 0xff4, end = 0x1034
block 0: block_offset = 0x40800
Call Erase(0x80800, 0x800)
block 1: block_offset = 0x41000
Call Erase(0x81000, 0x800)
Nvmem: writing 64 bytes, start = 0x80ff4
> nvmem rd 0xfe0 0x80
nvmem rd: o = fe0, s = 128|0x80
0x80fe0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x80ff0: ff ff ff ff 00 01 02 03 04 05 06 07 08 09 0a 0b
0x81000: 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b
0x81010: 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b
0x81020: 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b
0x81030: 3c 3d 3e 3f ff ff ff ff ff ff ff ff ff ff ff ff
Also tested the case where a write should end exactly at
the block boundary.
> nvmem wr 0xff0 16 3
nvmem wr: o = ff0, s = 16|0x10
start = 0xff0, end = 0x1000
block 0: block_offset = 0x40800
Call Erase(0x80800, 0x800)
Nvmem: writing 16 bytes, start = 0x80ff0
>
> nvmem rd 0xfe0 0x80
nvmem rd: o = fe0, s = 128|0x80
0x80fe0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x80ff0: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
0x81000: 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55
0x81010: 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55
Change-Id: Icbe66d3f79d84ed29ecc6207537ea0bf42781f3c
Signed-off-by: Scott <scollyer@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/330175
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
This function should not be part of the public GPIO API. It is only
available and used in the STM32 implementation. This moves the
prototype to a chip specific gpio.h that is used within the STM32 chip
directoy.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Manually verify GPIO functionality on discovery board
Change-Id: If9c97f8038b26815318652ca62c1132c95519fa2
Reviewed-on: https://chromium-review.googlesource.com/329968
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Previously a bogus rx_count value from the USB hardware could have
caused a buffer overflow while copying from the packet ram to the DMA
bounce buffer. I'm not sure if it is possible to cause the hardware
to generate a bogus rx_count, I doubt it, but this is now nicely
paranoid
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Test SPI bridge functionality on discover board
Change-Id: I080ba1c1f05c2b0a86a4c6eb89e8c1387827466e
Reviewed-on: https://chromium-review.googlesource.com/329849
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Nick Sanders <nsanders@google.com>
Previously the keyboard row and column pins could not use the GPIO
alternate function mechanism because their DEVALT bits were inverted
with respect to all of the others, making it impossible to correctly
configure them. With the refactor of the GPIO driver we can now add
the keyboard DEVALT entries to the gpio_alt_table, and use the
ALTERNATE macro and associated APIs to control the keyboard pin states.
The Wheatley RO firmware image is still 320 bytes smaller than before
the GPIO refactor.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Ran on Wheatley, manually verified keyboard functionality
Change-Id: Id04bc010834b5d95050b03ace6b0e1c5690757bf
Reviewed-on: https://chromium-review.googlesource.com/329762
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Body 5678901234567890123456789012345678901234567890123456789012345678901
Previously the GPIO driver used quite redundant encodings for its WUI
and DEVALT mapping tables. This refactor compresses those tables
significantly, while adding the ability to represent an inverted DEVALT
bit. The resulting RO firmware image for Wheatley is 384 bytes smaller.
This commit also corrects the interpretation of the func parameter to
gpio_set_alternate_function. Any non-negative func should be
interpreted as a request to switch a pin to an alternate mode.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Ran on Wheatley, manually verified basic functionality
Change-Id: I3a56a4b56d13a70a30c388e7e2c77dd7acd3838a
Reviewed-on: https://chromium-review.googlesource.com/329761
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
This adds two debugging commands to decode the PINMUX and GPIO
routings without having to look at a bunch of hex values.
They can easily be removed to save space, but they're kind of
handy for now.
BUG=chrome-os-partner:49952
BRANCH=none
TEST=make buildall, and test on Cr50
Run the "pinmux" and "gpiocfg" commands. Verify that the output
reflects the desired configs found in gpio.inc
I get this:
> pinmux
40060000: DIOM0 5 IN GPIO0_GPIO4
40060008: DIOM1 6 IN GPIO0_GPIO5
40060010: DIOM2 0 IN PU
40060028: DIOA0 70 UART0_TX
40060030: DIOA1 0 IN
40060038: DIOA2 0 IN
40060040: DIOA3 2 IN GPIO0_GPIO1
40060050: DIOA5 0 IN
40060058: DIOA6 0 IN
40060060: DIOA7 3 IN GPIO0_GPIO2
40060088: DIOA12 0 IN
400600a0: DIOB0 33 IN
400600a8: DIOB1 34 IN
400600b0: DIOB2 0 IN
400600b8: DIOB3 74 UART1_TX
400600c0: DIOB4 0 IN PD
400600c8: DIOB5 78 UART2_TX
400600d0: DIOB6 0 IN
400600d8: DIOB7 1 IN GPIO0_GPIO0
400600f8: GPIO0_GPIO0 3 DIOB7
400600fc: GPIO0_GPIO1 22 DIOA3
40060100: GPIO0_GPIO2 18 DIOA7
40060104: GPIO0_GPIO3 20 DIOA5
40060108: GPIO0_GPIO4 30 DIOM0
4006010c: GPIO0_GPIO5 29 DIOM1
40060110: GPIO0_GPIO6 28 DIOM2
40060208: UART0_RX 24 DIOA1
40060218: UART1_RX 8 DIOB2
40060228: UART2_RX 4 DIOB6
> gpiocfg
GPIO0_GPIO0: read 0 drive 1
GPIO0_GPIO1: read 0 drive 0
GPIO0_GPIO2: read 0 drive 0
GPIO0_GPIO4: read 0 drive 0
GPIO0_GPIO5: read 0 drive 0
>
Note that we skip GPIO0_GPIO3 and GPIO0_GPIO6 because they're
neither outputs nor interrupts. All the GPIOs can do that.
Change-Id: I93b881bfd93dc100096bbd005a6c31b2669eda2f
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329527
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
BUG=chrome-os-partner:49952
BRANCH=none
TEST=make buildall, run on Cr50 board
It's kind of hard to test GPIOs that aren't attached to anything,
but I've examined all the PINMUX controls and ARM GPIO settings,
and I *think* they're right.
Change-Id: I66ae94118f73c41193c6ca5c0af9708f6cc8a3e8
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329526
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Use built-in USB periperal to detect BC1.2 suppliers and update the
charge manager.
BUG=chrome-os-partner:48658
BRANCH=None
TEST=manual for lucid. Use a samus as the supplier, and insert the
charger into Lucid. Verify that it identifies it as SDP. Use a wall
charger and verify that Lucid identifies it as DCP.
Change-Id: I7842e9f75874f727837df5bfc28690662caf821c
Signed-off-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329236
Reviewed-by: Shawn N <shawnn@chromium.org>
Just a bit of refactoring. This cleans up some macro definitions
and error checking, and removes a duplicate list of GPIO signal
names.
BUG=none
BRANCH=none
TEST=make buildall, test on Cr50
No functional changes, so nothing new to test.
Change-Id: Iecacc5a0b7da02aa9d0b94f171c70f0b73e8edd5
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329303
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
port80 activity usually comes in bursts during AP boot and then goes
quiet. For power savings, turn off the port80 interrupt and timer after
no activity is seen for 30 seconds.
BUG=chrome-os-partner:50175
TEST=Boot chell, verify port80 prints are seen. Verify timer +
interrupts are disabled ~30 seconds later. Power down, power up, and
verify port80 prints are seen once again.
BRANCH=glados
Change-Id: Iea091d73aa0c6e9cfb36240d68e31a20425cea45
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/327256
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This cleans up a great deal of flakiness that we've seen on the
USB for a long time. I was misinterpreting and/or misimplementing
some of the documentation. This seems to make all the difference.
BUG=chrome-os-partner:50370
BRANCH=none
CQ-DEPEND=CL:328979,CL:*249229
TEST=make buildall, and test on Cr50
Before this CL, the USB connection would only work on USB2.0
buses, connected directly to my workstation. With this CL, it
works on USB2.0, USB3.0, through hubs, etc. Yay!
Change-Id: Icfa1910bf34f73332e2f8fc4f0d6789541549493
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/329262
Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Now that the pinmux information isn't packed into the GPIO alternate
function table, we can expand it a bit and give the fields nice names,
making the code easier to read and removing a number of bit packing
macros defined in registers.h.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Verified on cr50 hardware
CQ-DEPEND=CL:*249229
Change-Id: I9984bc37faf69b1ba9f1ba66a49596dd22e3b601
Reviewed-on: https://chromium-review.googlesource.com/328979
Commit-Ready: Bill Richardson <wfrichar@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Tested-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Previously the g chip and cr50 board abused the ALTERNATE macro to
encode the pinmux configuration. This switches them over to using a
PINMUX macro that is designed for this purpose.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
BRANCH=None
BUG=None
TEST=make buildall -j
Change-Id: I5c1f70b7aa92d87cc105e672aa66aee7f267c9a2
Reviewed-on: https://chromium-review.googlesource.com/328823
Commit-Ready: Anton Staaf <robotboy@chromium.org>
Tested-by: Anton Staaf <robotboy@chromium.org>
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
EC clears the SCI/SMI/Wake masks in the resume sequence for S3
and S0ix. This works in the S3 case because Coreboot reprograms
the masks after EC. But in S0ix, these masks stay cleared forever.
This means that no further events are sent to the host.
This patch conditionally clears the masks only in the S3 transition.
BRANCH=glados
BUG=chrome-os-partner:48834
TEST=hostevent in EC console before and after S0ix to ensure SCI masks
are preserved
Change-Id: I23751680788ee7a239e321309a1334d37adc4f43
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/320191
Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Tested-by: Jenny Tc <jenny.tc@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Change the report_error() macro that we use to indicate unhandled
conditions so that it can take an integer argument. Sometimes
that's useful.
BUG=none
BRANCH=none
TEST=make buildall, try some USB stuff, everything still works
No functional difference, console error output only.
Change-Id: Icdfd1f9162bb5e557c711b6363b73ef55fbc272d
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/328490
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
To ensure it8320's compatibility on the LPC platform, we need to
disable SPI slave interface (default enabled) so that LPC module
will function normally.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=LPC module of it8320 works normally.
Change-Id: I259651b32f41ebae498e13bf07ebb68e5e520058
Reviewed-on: https://chromium-review.googlesource.com/328142
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Before the change was made, the fan control timer keeps running
even all of the fans are off.
reproduce the problem:
1. fanset 3333
2. fanset 0
fan is disabled but fan control timer keeps running.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. fanset 3333
2. fanset 0
both fan and timer are off.
Change-Id: Id38f3a4c64bbb36e8b32baefd285dbb0bf14e47e
Reviewed-on: https://chromium-review.googlesource.com/327870
Commit-Ready: Dino Li <dino.li@ite.com.tw>
Tested-by: Dino Li <dino.li@ite.com.tw>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
board_hibernate() may take alternate actions to place the chip into
hibernate, so inform the PD MCU that we're going to hibernate before
calling the function.
BUG=None
TEST=Run 'hibernate' on chell, verify that PD MCU goes to hibernate and
wakes when AC is attached.
BRANCH=glados
Change-Id: I71c12dcb416d54c79ac7d40e9bf430e268071fb2
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/327613
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The g chip is used in multiple designs, likely to have different flash
memory layout and access permissions.
This patch introduces a mechanism which allows the board layer to
provide flash configuration information to the flash driver.
The flash region which is going to be enabled for write access depends
on the area the code is executing from. If running from the bottom
half (A), the whole top half should be writeable (this includes both
NVRAM area and the B code space). If running from B, the writeable
area starts on top of RO and extends to the end of NVRAM.
CQ-DEPEND=CL:*248190
BRANCH=none
BUG=chrome-os-partner:37754
TEST=with the rest of the patches applied verified that software
update can happen in both spaces, A and B.
Change-Id: Iab1c1a2766ae9bcfe04ff170c010f180cd1f770f
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/327412
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Nadim Taha <ntaha@chromium.org>
It is difficult to tell what went wrong if a flash operation failed.
This patch adds printouts in cases of failure. The extension command
console channel is used.
BRANCH=none
BUG=chrome-os-partner:37754
TEST=observed error messages reported while debugging firmware update
code.
Change-Id: I73d509ac5088249e8d34e32e760f3d2f063c91cd
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/327411
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
In order to prevent the influence of the deviation of AVCC during ADC
conversion, the internal reference voltage (Vref) of ADC is fixed to
2.816V even it derives from AVCC.
Modified sources:
1. wheatley/board.c: Modified max adc voltage of ADC to 28.160V.
2. adc_chip.h: Modified internal ref voltage of ADC to 2.816V.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ib514f4bdc114802870eb3c77c650e18c05eb9617
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/327046
Reviewed-by: Shawn N <shawnn@chromium.org>
When deciding which of the two images to start, A or B - consider the
image timestamp if everything else is equal. The later image should
take precedence.
Also, simplify the existing logic, and consider image A to be 'newer'
if both copies are the same otherwise.
BRANCH=none
BUG=chrome-os-partner:37754
TEST=with the rest of the patches applied, verified that the newer
image of the two gets started
Change-Id: I2c7a50ecfc8d254498c8e96f8651b8d53005897c
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/327414
Reviewed-by: Marius Schilder <mschilder@chromium.org>
The launcher should explicitly disable writes to the code space where
the loaded code is going to be running from.
BRANCH=None
BUG=chrome-os-partner:37554
TEST=with the rest of the patches applied firmware updates work as
expected.
Change-Id: I744f7016e4427188f53e8fa3302e8c06cf836e2e
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/327413
Reviewed-by: Marius Schilder <mschilder@chromium.org>
We found the deviation of ITIM32 is huge since apb2's clock isn't divisible
by 1MHz. (The default resolution of hwtimer is 1us.)
The solution is set the freq of apb2 the same as core clock. Note apb2 is
twice value of original one. It will increase power consumption slightly.
But we found the difference is acceptable no matter core clock is 15M
or 13MHz.
In this version, we also use the arrays to adjust i2c bus timing if
bus' freq is 400K or 1MHz for all source clock freqs of i2c.
Modified sources:
1. i2c.c: Support all source clock freqs of i2c for best bus timing.
2. clock.c: Set divider of apb2 if it's clock isn't divisible by 1MHz.
3. uart.c: Modified baud-rate for apb2 which is the same as core clock.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: I6089caaaf9aa16186d7c6acf6f5fea0682a55655
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/327120
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Fixed the bug that some of DP80's data is skipping if the speed of writing
by host is high. The solution is grabbing all data and sending them to UART
until FIFO of DP80 is empty in ISR.
Modified sources:
1. lpc.c: Fixed the bug that some of DP80's data is skipping.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ie53a5c7f0a80a1f836b571a00871cb57b42c87db
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/326931
Reviewed-by: Randall Spangler <rspangler@chromium.org>
The output enable bit was being set before the output value was
initialized.
BRANCH=none
BUG=none
TEST=Confirmed the fix with a logic analyzer
Change-Id: If8228d716b4924b5fd65b8f59436f4b37f05644e
Signed-off-by: Nadim Taha <ntaha@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/327212
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The required output length is not known until padding
verification completes (this check is already done
in the appropriate padding check functions).
BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
TEST=tests under test/tpm2/ pass.
Change-Id: I452244d052b7f334a6907bd653645671033a0890
Signed-off-by: nagendra modadugu <ngm@google.com>
Reviewed-on: https://chromium-review.googlesource.com/327074
Commit-Ready: Nagendra Modadugu <ngm@google.com>
Tested-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Marius Schilder <mschilder@chromium.org>
In the S0 <-> S3 transition, Coreboot sends EC messages to set/clear the
wake masks when the SMI is invoked. For S0ix, EC sets and clears the
wake mask via this patch.
These functions are directly invoked from the state machine transition states.
During S0ix entry, the wake mask for lid open is enabled. During S0ix exit,
the wake mask for lid open is cleared. All pending events are also cleared
BRANCH=none
BUG=chrome-os-partner:48834
TEST=test lidopen in S0ix
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Change-Id: I52a15f502ef637f7b7e4b559820deecb831d818f
Reviewed-on: https://chromium-review.googlesource.com/320190
Commit-Ready: Divya Jyothi <divya.jyothi@intel.com>
Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
If a label is specified, then the NUL terminating
character is considered part of the label per the
TPM2 implementation.
BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
TEST=tests under test/tpm2/ pass.
Change-Id: If5fccc293f7ab52fd6c33e2f3c38695c2921d919
Signed-off-by: nagendra modadugu <ngm@google.com>
Reviewed-on: https://chromium-review.googlesource.com/326910
Commit-Ready: Nagendra Modadugu <ngm@google.com>
Tested-by: Marius Schilder <mschilder@chromium.org>
Tested-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Marius Schilder <mschilder@chromium.org>
In normal operation the 16 bit timer number 1 is set up to count every
microsecond, and every 1000 counts (i.e. every millisecond) to assert an
IRQ (Interrupt Request). After a microsecond the IRQ is deasserted.when
the count is again not at its limit.
The IRQ handler ignores the IRQ from the timer itself.
If the clock is stopped or the autoreload of the counter is disabled
then the value of the count is left unchanged. If this count is the
limit then the IRQ will remain asserted. For stopping the clock this is
approximatly a 1 in 1000 chance, or is certain if the autoreload is
disabled.
If the IRQ from the timer continues to be asserted, then the NVIC will
continue to generate a fresh call to the IRQ handler as each previous
exception completes.
The fix is to do what almost every IRQ handler does for almost every
processor, and clear the request in the peripheral that is causing the
interrupt, rather than hoping that the timer will clear it itself. This
agrees with how the event timer is used. There may be a lurking bug in
the system timer handler as well as it also expects the timer to clear
its own IRQ.
BUG=chrome-os-partner:48499
TEST=Pass 2000s of continuous calls to port_80_interrupt_disable() /
port_80_interrupt_enable() without WDT being triggered. Stop the
autoreload and see it doesn't watchdog.
BRANCH=glados
Change-Id: I4726854b7784e2e4a39b8cb74c350206d71f90df
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/326781
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
Referring to i2c ports as i2c0 thru i2c4 is confusing, due to the
special naming of controller 0 ports, so use their actual names from the
datasheet.
BUG=None
TEST=Trigger failure on i2c0_1, verify that "i2c0_1 bad status .." is
seen on console.
BRANCH=glados, strago
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Ibd0d638e5af1c0a64e6f4b1a709b790b6b10d5e6
Reviewed-on: https://chromium-review.googlesource.com/325822
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
EC boot / hash computing can be a bottleneck for system boot time.
Reduce this bottleneck by running our processor at 48 MHz through boot,
until vboot hashing of RW completes.
BUG=chrome-os-partner:49583
TEST=Boot chell, verify vboot hash completes within 1 sec of EC boot and
'cbmem' delta between 'vboot select&load kernel' and 'finished EC
verification' is reduced to ~250 ms (which includes sysjump time).
BRANCH=glados
Change-Id: I18d87e685b89decef761e51517bfcfc43dcf8ef0
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/326792
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The new register definitions file has been supplied, it is not
defining some fields which were present only in FPGA. Some tweaks are
required to accommodate this.
BRANCH=none
BUG=chrome-os-partner:50141
TEST=new code successfully boots on the evaluation board
Change-Id: Ie4158554e0aaf039d59669558861a763a23f0ceb
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/326803
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
The TPM2 api does not require keys to be word-aligned,
so have the compiler generate alignment-safe reads where
necessary.
BRANCH=none
BUG=chrome-os-partner:43025,chrome-os-partner:47524
TEST=tests under test/tpm2/ pass, more TCG tests pass.
Change-Id: I247e29f2bec139ab7ed4010ffb58cdae77ba9e0b
Signed-off-by: nagendra modadugu <ngm@google.com>
Reviewed-on: https://chromium-review.googlesource.com/326201
Commit-Ready: Nagendra Modadugu <ngm@google.com>
Tested-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Creating bootloader for the chip involves signing the image with an
'air gap' - some physical presence action is required. We don't want
this to be required when the builder is building cr50 for test
purposes.
The solution is to keep using the dummy private key when building by
default, and invoking make differently when building an image which
would be accepted by the hardware.
Setting CR50_RO_KEY variable in the environment or in the make command
line will cause the signer use the value of this variable as the name
of the file containing the key to use for signing the RO image.
Should this file be a public key, the signer will stop and look for a
fob containing the matching private key, and will stream the RO image
through the fob for signing.
Using the fob requires that the signer runs under sudo, but we do not
want the generated files to belong to root, some more code is added to
change the generated files' ownership to user running the make.
BRANCH=none
BUG=chrome-os-partner:49950
TEST=ran the following tests:
- verified that the build still succeeds by default.
- invoked make as follows:
CR50_RO_KEY=cr50_rom0-dev-blsign.pem.pub make BOARD=cr50
observed the signer stop to wait for the user to interact with the
USB fob and proceed. Made sure that the generated image runs
successfully on the evaluation board.
- verified that 'make BOARD=cr50 clean' still works (i.e. none of the
generated files is owned by root).
Change-Id: I733ec6386c1dfd838d83d22fb589fa64e5eeaced
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/326484
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
With transitioning to silicon there is no need to check if the
hardware includes USB subsystem or not.
BRANCH=none
BUG=chrome-os-partner:50141
TEST=the cr50 image successfully boots to the ec prompt
Change-Id: I593205cf307e0fce5e74ea695ed1cf5bfea8fde4
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/326482
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
To get better power consumption in S0, we add FW support for
CONFIG_LOW_POWER_S0.
Before entering deep idle in S0, we must enable Host interrupt to wake up
EC if it needs to service LPC bus.
This version also add a new bit of sleep_mask (SLEEP_MASK_FAN) in system.h
to prevent EC enter deep idle if fan's duty isn't zero. Normally, the freq of
PWM fan is 25 kHz. It means we must select apb2 clock as the source clock of
PWM fan. Or fan would stop when ec enters deep idle because of no PWM signal.
In hwtimer.c, we reset the preload counter to maximum value in ITEI32's ISR
since preload counter is changed by __hw_clock_source_set all the time.
We also found there're no event set if it's deadline is over 32 bits but
current source clock isn't. To prevent ec doesn't wake-up in deep-idle even if
ITIM32 expires, FW set an event for ITIM32 after process_timers().
Modified sources:
1. wheatley/board.h: Add CONFIG_LOW_POWER_S0 definition.
2. clock.c: Enable Host interrupt for LPC.
3. clock.c: Disable LP_WK_CTL for better power consumption.
4. gpio.c: Add ISR for Host interrupt.
5. uart.c: Introduce bit 6 of USTAT to make sure transmitting is completed.
6. register.h: Add uart_clear_pending_wakeup function.
7. hwtimer.c: Fixed watchdog issue when ITIM32 is closed to overflow.
8. fan.c: Enable deep sleep if duty cycle is zero.
9. include/system.h: Add SLEEP_MASK_FAN for fan control loop.
10. core/cortex-m/task.c: Add "isb" to flash the garbage data in the
instruction pipeline.
BUG=chrome-os-partner:34346
TEST=make buildall -j; test nuvoton IC specific drivers
BRANCH=none
Change-Id: Ibe3630d0d68cf3f32206adb2afa1b5958916a2be
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/324651
Reviewed-by: Shawn N <shawnn@chromium.org>
The max retry counts are based on the TSMC specification. This is a necessary
change given that we're using their smart program/erase algorithms.
BRANCH=none
BUG=chrome-os-partner:45366
TEST=Tested RW updates.
Change-Id: I18ca09e54ce13f2cf75dac32fb2457d5963ca040
Signed-off-by: Nadim Taha <ntaha@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/325535
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
