qca-wifi-7: zyxel_nwa130be - fine tune thermal setting

Signed-off-by: YenLin Pan <YenLin.Pan@zyxel.com.tw>

.github/workflows/build-dev.yml

@@ -21,7 +21,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap7110c-341x', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
+        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
     steps:
     - uses: actions/checkout@v3
 

feeds/hostapd/hostapd/files/hostapd.sh

@@ -117,8 +117,6 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -162,7 +160,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		rts_threshold beacon_rate maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -261,8 +259,6 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
-	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -471,6 +467,9 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
+
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -724,7 +723,8 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp
+		vendor_elements fils uci_section dynamic_probe_resp \
+		rssi_reject_assoc_rssi rssi_ignore_probe_request 
 
 	set_default fils 0
 	set_default isolate 0
@@ -778,6 +778,8 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/hostapd/hostapd/patches/zzz-ignore-probe-event.patch

@@ -0,0 +1,14 @@
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
+ 	int ubus_response;
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+-	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
++	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
++		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
+ 		return;
++	}
+ 
+ 	if (len < IEEE80211_HDRLEN)
+ 		return;

feeds/hostapd/hostapd/src/src/ap/ubus.c

@@ -1944,6 +1944,21 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
+{
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	if (!addr)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", addr);
+	blobmsg_add_u32(&b, "rssi", rssi);
+
+	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
+}
+
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/hostapd/hostapd/src/src/ap/ubus.h

@@ -56,6 +56,7 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ath11k-wifi/Makefile

@@ -41,6 +41,10 @@ ALLWIFIBOARDS:= \
 	edgecore-oap102 \
 	edgecore-oap103 \
 	edgecore-eap104 \
+	emplus-wap380c \
+	emplus-wap385c \
+	emplus-wap386v2 \
+	emplus-wap581 \
 	liteon-wpx8324 \
 	indio-um-310ax-v1 \
 	indio-um-510axp-v1 \
@@ -53,6 +57,8 @@ ALLWIFIBOARDS:= \
 	sonicfi-rap630c-311g \
 	sonicfi-rap630w-311g \
 	sonicfi-rap630w-312g \
+	sonicfi-rap650c \
+	sonicfi-rap630e \
 	tplink-ex227 \
 	tplink-ex447 \
 	yuncore-ax840 \
@@ -403,6 +409,10 @@ $(eval $(call generate-ath11k-wifi-package,edgecore-eap102,Edgecore EAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap102,Edgecore OAP102))
 $(eval $(call generate-ath11k-wifi-package,edgecore-oap103,Edgecore OAP103))
 $(eval $(call generate-ath11k-wifi-package,edgecore-eap104,Edgecore EAP104))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap380c,Emplus WAP380C))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap385c,Emplus WAP385C))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap386v2,Emplus WAP386 V2))
+$(eval $(call generate-ath11k-wifi-package,emplus-wap581,Emplus WAP581))
 $(eval $(call generate-ath11k-wifi-package,liteon-wpx8324,Liteon WPX8324))
 $(eval $(call generate-ath11k-wifi-package,indio-um-310ax-v1,Indio UM-310AX V1))
 $(eval $(call generate-ath11k-wifi-package,indio-um-510axp-v1,Indio UM-510AXP V1))
@@ -410,6 +420,8 @@ $(eval $(call generate-ath11k-wifi-package,indio-um-510axm-v1,Indio UM-510AXM V1
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630c-311g,Sonicfi RAP630C 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-311g,Sonicfi RAP630W 311G))
 $(eval $(call generate-ath11k-wifi-package,sonicfi-rap630w-312g,Sonicfi RAP630W 312G))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap650c,SonicFi RAP650C))
+$(eval $(call generate-ath11k-wifi-package,sonicfi-rap630e,SonicFi RAP630E))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex227,TP-Link EX227))
 $(eval $(call generate-ath11k-wifi-package,tplink-ex447,TP-Link EX447))
 $(eval $(call generate-ath11k-wifi-package,yuncore-ax840,YunCore AX840))

feeds/ipq807x_v5.4/cooling/files/cooling.init

@@ -18,9 +18,11 @@ start() {
 	[ "$enabled" -gt 0 ] || return 1
 
 	case "$board" in
-	sonicfi,rap630c-311g|\
-	sonicfi,rap630w-311g)
-        service_start /usr/sbin/cooling
+		sonicfi,rap630c-311g)
+		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630c-311g-cooling.conf
+		;;
+		sonicfi,rap630w-311g)
+		service_start /usr/sbin/cooling -c /etc/cooling/sonicfi-rap630w-311g-cooling.conf
 		;;
 	esac
 

feeds/ipq807x_v5.4/cooling/src/cooling.c

@@ -28,143 +28,270 @@
 
 #define CUR_STATE_PATH "/sys/devices/virtual/thermal/cooling_device%i/cur_state"
 #define TEMPER_PATH "/sys/devices/virtual/thermal/thermal_zone%i/temp"
+#define CPU_FREQ_PATH "/sys/devices/system/cpu/cpu0/cpufreq/%s"
 
 #define PATH_MAX 256
-#define BUF_MAX 8
-#define THERSHOLD_MAX 20
+#define BUF_MAX 32
 #define PHY0 0
 #define PHY1 1
+#define NUM_VALUES 4
+
+int load_config_file=0;
+
+//#define ULOG_INFO(fmt, ...) ulog(LOG_INFO, fmt, ## __VA_ARGS__)
 
 typedef unsigned char	u8;
+typedef unsigned long	u32;
 
 u8 w2g_threshold_level=0;
 u8 w5g_threshold_level=0;
 u8 w2g_cur_temper=0;
 u8 w5g_cur_temper=0;
+u32 level_cpu_freq=1008000;
 
-
+/* default value of wifi thresholds*/
 #ifdef PLATFORM_RAP630C_311G
-u8 level_2g_lo[4]={0, 105, 110, 115};
-u8 level_2g_hi[4]={105, 110, 115, 120};
-u8 level_2g_limit[4]={0, 35, 50, 70};
-u8 level_5g_lo[4]={0, 105, 110, 115};
-u8 level_5g_hi[4]={105, 110, 115, 120};
-u8 level_5g_limit[4]={0, 20, 30, 50};
+u8 level_2g_high[4]={105, 110, 115, 120};
+u8 level_2g_low[4]={0, 105, 110, 115};
+u8 level_2g_mitigation[4]={0, 35, 50, 70};
+u8 level_5g_high[4]={105, 110, 115, 120};
+u8 level_5g_low[4]={0, 105, 110, 115};
+u8 level_5g_mitigation[4]={0, 20, 30, 50};
+u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
 #endif
 
 #ifdef PLATFORM_RAP630W_311G
-u8 level_2g_lo[4]={0, 105, 110, 115};
-u8 level_2g_hi[4]={105, 110, 115, 120};
-u8 level_2g_limit[4]={0, 20, 50, 70};
-u8 level_5g_lo[4]={0, 105, 110, 115};
-u8 level_5g_hi[4]={105, 110, 115, 120};
-u8 level_5g_limit[4]={0, 20, 50, 70};
+u8 level_2g_high[4]={105, 110, 115, 120};
+u8 level_2g_low[4]={0, 105, 110, 115};
+u8 level_2g_mitigation[4]={0, 20, 50, 70};
+u8 level_5g_high[4]={105, 110, 115, 120};
+u8 level_5g_low[4]={0, 105, 110, 115};
+u8 level_5g_mitigation[4]={0, 20, 50, 70};
+u32 level_cpu_frequency[4]={1008000, 800000, 800000, 800000};
 #endif
 
 static char *config_file = NULL;
-char temp[4][BUF_MAX];
 
-#define ULOG_DBG(fmt, ...) ulog(LOG_DEBUG, fmt, ## __VA_ARGS__)
+typedef struct {
+    int thresholds_high[NUM_VALUES];
+    int thresholds_low[NUM_VALUES];
+    int mitigation[NUM_VALUES];
+    int cpu_freq[NUM_VALUES];
+} WifiConfig;
 
-static void write_cur_state (char *filename, int state) {
+WifiConfig wifi2g = {0}, wifi5g = {0};
+
+static void set_cpu_freq (int freq) {
+	FILE * fp;
+	char filename[PATH_MAX];
+
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_governor");
+
+	fp = fopen(filename, "w");
+	if (!fp) {
+		ULOG_ERR("open scaling_governor error\n");
+	}
+	fprintf(fp, "%s", "userspace");
+	fclose(fp);
+
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "scaling_setspeed");
+
+	fp = fopen(filename, "w");
+	if (!fp) {
+		ULOG_ERR("open scaling_setspeed error\n");
+	}
+	fprintf(fp, "%d", freq);
+	fclose(fp);
+}
+
+void parse_line(const char* line, const char* key, int* array) {
+	char label[64];
+	int values[NUM_VALUES];
+	int i;
+
+	if (sscanf(line, "%s %d %d %d %d %d", label, &values[0], &values[1], &values[2], &values[3], &values[4]) == 5) {
+		for (i = 0; i < NUM_VALUES; ++i) {
+			array[i] = values[i];
+		}
+	}
+}
+
+int load_config() {
+	FILE * fp = fopen(config_file, "r");
+	if (!fp) {
+		ULOG_ERR("open config file error\n");
+		return 1;
+	}
+
+	WifiConfig* current_config = NULL;
+	char line[256];
+
+	while (fgets(line, sizeof(line), fp)) {
+		if (strstr(line, "[wifi2g]")) {
+			current_config = &wifi2g;
+		} else if (strstr(line, "[wifi5g]")) {
+			current_config = &wifi5g;
+		} else if (current_config) {
+			if (strstr(line, "thresholds_high")) {
+				parse_line(line, "thresholds_high", current_config->thresholds_high);
+			} else if (strstr(line, "thresholds_low")) {
+				parse_line(line, "thresholds_low", current_config->thresholds_low);
+			} else if (strstr(line, "mitigation")) {
+				parse_line(line, "mitigation", current_config->mitigation);
+			} else if (strstr(line, "CPU_freq")) {
+				parse_line(line, "CPU_freq", current_config->cpu_freq);
+			}
+		}
+	}
+
+	fclose(fp);
+	set_cpu_freq(wifi5g.cpu_freq[0]);
+
+	return 0;
+}
+
+int load_default_config(){
+	int i=0;
+
+	set_cpu_freq(1008000);
+	for (i = 0; i < NUM_VALUES; i++) {
+		wifi2g.thresholds_high[i]=level_2g_high[i];
+		wifi2g.thresholds_low[i]=level_2g_low[i];
+		wifi2g.mitigation[i]=level_2g_mitigation[i];
+		wifi2g.cpu_freq[i]=level_cpu_frequency[i];
+		wifi5g.thresholds_high[i]=level_5g_high[i];
+		wifi5g.thresholds_low[i]=level_5g_low[i];
+		wifi5g.mitigation[i]=level_5g_mitigation[i];
+		wifi5g.cpu_freq[i]=level_cpu_frequency[i];
+	}
+	return 0;
+
+}
+
+static void write_cur_state (const char *filename, int state) {
 	FILE * fp;
 
-	ULOG_DBG("write_cur_state filename=[%s] [%d]\n", filename, state);
 	fp = fopen(filename, "w");
 	if (!fp){
-		ULOG_ERR("some kind of error write cur_state\n");
+		ULOG_ERR("open %s file error\n",filename);
 	}
 	fprintf(fp, "%d", state);
 	fclose(fp);
 }
 
-static void read_cur_state (char *filename, char *buffer) {
-	FILE * fp;
-
+int read_cur_state(const char *filename, char *buf, size_t buffer) {
+	FILE *fp;
+	
 	fp = fopen(filename, "r");
-	if (!fp){
-		ULOG_ERR("some kind of error write cur_state\n");
+	if (!fp) {
+		ULOG_ERR("open %s file error\n",filename);
+		return -1;
 	}
-	if (0 == fread(buffer, sizeof(char), 3, fp)) {
-		ULOG_ERR("some kind of error read value\n");
+	if (!fgets(buf, buffer, fp)) {
+		ULOG_ERR("Failed to read %s file\n", filename);
+		fclose(fp);
+		return -1;
 	}
 	fclose(fp);
+	return 0;
 }
 
+
 static void wifi_get_temperature() {
 	char filename[PATH_MAX];
-	FILE * fp;
-	int i = 0;
 	char buffer[BUF_MAX];
+	int i = 0;
+
+//	ULOG_INFO("=================================\n");
+
+	/* read cpuinfo_cur_freq*/
+	snprintf(filename, PATH_MAX, CPU_FREQ_PATH, "cpuinfo_cur_freq");
+
+	memset(buffer, 0, BUF_MAX);
+	read_cur_state(filename, buffer, sizeof(buffer));
+//	ULOG_INFO("CPU current frequency: %s\n", buffer);
 
 	/* get current phy cooling state*/
-	for (i=0 ; i <= 1; i++ ) {
+	for (i=0; i <= 1; i++) {
 		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
-		read_cur_state(filename, buffer);
-		ULOG_DBG("read from Phy%i cur_state is %s\n", i, buffer);
+		read_cur_state(filename, buffer, sizeof(buffer));
+//		ULOG_INFO("Phy%i cur_state is: %s\n", i, buffer);
 	}
 
-	for (i=0 ; i <= 3; i++ ) {
+	for (i=0; i <= 3; i++) {
+		memset(buffer, 0, BUF_MAX);
 		snprintf(filename, PATH_MAX, TEMPER_PATH, i);
-		fp = fopen(filename, "r");
-		if (!fp) {
-			ULOG_ERR("some kind of error open value\n");
-		}
-		memset(temp[i], 0, BUF_MAX);
-		if (0 == fread(temp[i], sizeof(char), 3, fp)) {
-			ULOG_ERR("some kind of error read value\n");
-		}
-		fclose(fp);
-		ULOG_DBG("thermal_zone%i cur_temp is %s\n", i, temp[i]);
+		read_cur_state(filename, buffer, sizeof(buffer));
+//		ULOG_INFO("thermal_zone%i cur_temp is: %s\n", i, buffer);
+
+		if (i == 0)
+			w2g_cur_temper=atoi(buffer);
+		else if (i == 3)
+			w5g_cur_temper=atoi(buffer);
 	}
 
-	w2g_cur_temper=atoi(temp[0]);
-	w5g_cur_temper=atoi(temp[3]);
+	if (w5g_cur_temper >= 120)
+	{
+		ULOG_ERR("!! Temperature is over %d degree, system will reboot\n", w5g_cur_temper);
+		sync();
+		if ( -1 != system("reboot &") ){
+			printf("sysyem reboot...\n");
+		}
+	}
 }
 
 static void wifi_set_cooling() {
 	char filename[PATH_MAX];
 	int level;
 
-	for (level=0 ; level<=3 ; level++) {
-		if (w2g_cur_temper >= level_2g_lo[level] && w2g_cur_temper < level_2g_hi[level]) {
-			ULOG_DBG("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
+	for (level = 0; level <= 3; level++) {
+		if (w2g_cur_temper >= wifi2g.thresholds_low[level] && w2g_cur_temper < wifi2g.thresholds_high[level]) {
+//			ULOG_INFO("2G at level %d , %d degree\n" ,level, w2g_cur_temper);
 			if (w2g_threshold_level != level) {
-				ULOG_DBG("setting 2G reduce %d percent\n" ,level_2g_limit[level]);
+//				ULOG_INFO("setting 2G reduce %d percent\n" ,wifi2g.mitigation[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY0);
-				write_cur_state(filename, level_2g_limit[level]);
+				write_cur_state(filename, wifi2g.mitigation[level]);
 				w2g_threshold_level = level;
 			}
 		}
-		if (w5g_cur_temper >= level_5g_lo[level] && w5g_cur_temper < level_5g_hi[level]) {
-			ULOG_DBG("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
+		if (w5g_cur_temper >= wifi5g.thresholds_low[level] && w5g_cur_temper < wifi5g.thresholds_high[level]) {
+//			ULOG_INFO("5G at level %d , %d degree\n" ,level, w5g_cur_temper);
 			if (w5g_threshold_level != level) {
-				ULOG_DBG("setting 5G reduce %d percent\n" ,level_5g_limit[level]);
+//				ULOG_INFO("setting 5G reduce %d percent\n" ,wifi5g.mitigation[level]);
 				snprintf(filename, PATH_MAX, CUR_STATE_PATH, PHY1);
-				write_cur_state(filename, level_5g_limit[level]);
+				write_cur_state(filename, wifi5g.mitigation[level]);
 				w5g_threshold_level = level;
+				set_cpu_freq(wifi5g.cpu_freq[level]);
 			}
 		}
 	}
+
 }
 
+
 static void cooling_init() {
-	char filename[256];
-	int i;
+	char filename[PATH_MAX];
+	int i,result=0;
 
 	for (i=0 ; i <= 1; i++) {
 		snprintf(filename, PATH_MAX, CUR_STATE_PATH, i);
 		write_cur_state(filename, 0);
 	}
+
+	if(load_config_file)
+		result = load_config();
+
+	if (result == 1 || load_config_file == 0)
+		load_default_config();
 }
 
 void print_usage(void)
 {
 	printf("\nWifi-cooling daemon usage\n");
 	printf("Optional arguments:\n");
-	printf("  -c <file>        config file\n");
-	printf("  -d               debug output\n");
+	printf("  -c <file>        setting with config file\n");
+	printf("  -d               default setting\n");
 	printf("  -h               this usage screen\n");
 }
 
@@ -185,17 +312,18 @@ int main(int argc, char *argv[])
 	setpriority(PRIO_PROCESS, getpid(), -20);
 
 	ulog_open(ULOG_STDIO | ULOG_SYSLOG, LOG_DAEMON, "cooling");
-	ulog_threshold(LOG_INFO);
+	ulog_threshold(LOG_ERR);
+//	ulog_threshold(LOG_INFO);
 
-	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
+ 	while ((ch = getopt(argc, argv, "c:dh")) != -1) {
 		switch (ch) {
 		case 'c':
 			printf("wifi-cooling load configuration file %s\n", optarg);
 			config_file = optarg;
+			load_config_file=1;
 			break;
 		case 'd':
-			printf("wifi-cooling ulog_threshold set to debug level\n");
-			ulog_threshold(LOG_DEBUG);
+			printf("wifi-cooling set to default value\n");
 			break;
 		case 'h':
 		default:
@@ -212,4 +340,4 @@ int main(int argc, char *argv[])
 	uloop_done();
 
 	return 0;
-}
+}

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630c-311g-cooling.conf

@@ -1,15 +1,11 @@
-sampling 5000
+[wifi2g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           35          50          70
+CPU_freq            1008000     800000      800000      800000
 
-[tsens_tz_sensor1]
-sampling 	5000
-thresholds 			105			110			115			119			120
-thresholds_clr 		0			100			105			110			115
-actions 			cooling		cooling	 	cooling		cooling		shutdown
-action_info 		0			35	 		50			70			800000
-
-[tsens_tz_sensor4]
-sampling 	5000
-thresholds 			105			110			115			119			120
-thresholds_clr 		0			100			105			110			115
-actions 			cooling		cooling		cooling		cooling		shutdown
-action_info 		0			20			30	 		50			800000
+[wifi5g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          30          50
+CPU_freq            1008000     800000      800000      800000

feeds/ipq807x_v5.4/cooling/src/sonicfi-rap630w-311g-cooling.conf

@@ -1,15 +1,11 @@
-sampling 5000
+[wifi2g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          50          70
+CPU_freq            1008000     800000      800000      800000
 
-[tsens_tz_sensor1]
-sampling 	5000
-thresholds 			105			115			119			125
-thresholds_clr 		0			105			110			120
-actions 			cooling		cooling	 	cooling		cooling
-action_info 		0			20	 		50			70
-
-[tsens_tz_sensor4]
-sampling 	5000
-thresholds 			105			115			119			125
-thresholds_clr 		0			105			110			120
-actions 			cooling		cooling		cooling		cooling
-action_info 		0			20			50	 		70
+[wifi5g]
+thresholds_high     105         110         115         120
+thresholds_low      0           105         110         115
+mitigation          0           20          50          70
+CPU_freq            1008000     800000      800000      800000

feeds/ipq807x_v5.4/hostapd/files/hostapd.sh

@@ -117,8 +117,6 @@ hostapd_common_add_device_config() {
 	config_add_boolean legacy_rates
 	config_add_int cell_density
 	config_add_int rts_threshold
-	config_add_int rssi_reject_assoc_rssi
-	config_add_int rssi_ignore_probe_request
 	config_add_int maxassoc
 	config_add_boolean maxassoc_ignore_probe
 
@@ -162,7 +160,7 @@ hostapd_prepare_device_config() {
 
 	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \
-		rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc \
+		rts_threshold beacon_rate maxassoc \
 		multiple_bssid he_co_locate rnr_beacon ema acs_exclude_dfs \
 		maxassoc_ignore_probe band
 
@@ -261,8 +259,6 @@ hostapd_prepare_device_config() {
 		hostapd_add_rate brlist "$br"
 	done
 
-	[ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
-	[ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N"
 	[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 	[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
@@ -472,6 +468,9 @@ hostapd_common_add_bss_config() {
 	config_add_string uci_section
 
 	config_add_boolean dynamic_probe_resp
+
+	config_add_int rssi_reject_assoc_rssi
+	config_add_int rssi_ignore_probe_request
 }
 
 hostapd_set_vlan_file() {
@@ -725,7 +724,8 @@ hostapd_set_bss_options() {
 		airtime_bss_weight airtime_bss_limit airtime_sta_weight \
 		multicast_to_unicast_all proxy_arp per_sta_vif \
 		eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
-		vendor_elements fils uci_section dynamic_probe_resp multi_psk
+		vendor_elements fils uci_section dynamic_probe_resp multi_psk \
+		rssi_reject_assoc_rssi rssi_ignore_probe_request
 
 	set_default fils 0
 	set_default isolate 0
@@ -780,6 +780,8 @@ hostapd_set_bss_options() {
 	append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 	append bss_conf "utf8_ssid=$utf8_ssid" "$N"
 	append bss_conf "multi_ap=$multi_ap" "$N"
+	[ -n "$rssi_reject_assoc_rssi" ] && append bss_conf "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N"
+	[ -n "$rssi_ignore_probe_request" ] && append bss_conf "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N"
 	[ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N"
 
 	[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"

feeds/ipq807x_v5.4/hostapd/files/mpskd

@@ -144,7 +144,7 @@ function netifd_reload() {
 
 			push(ssid.interfaces, iface.ifname);
 			ssid.bands[band] = iface.ifname;
-			ssid.mpsk = config.multi_psk;
+			ssid.mpsk = ssid?.mpsk ? true : config.multi_psk;
 			for (let sta in iface.stations) {
 				let stacfg = sta.config;
 
@@ -308,18 +308,18 @@ function sta_auth_cache(ifname, addr, idx, phrase) {
 function auth_cb(msg) {
 	let data = msg.data;
 
-	if (!is_ssid_mpsk(data.iface))
-		return;
-
 	printf(`Event ${msg.type}: ${msg.data}\n`);
 	switch (msg.type) {
 	case 'sta_auth':
+		if (!is_ssid_mpsk(data.iface))
+			return;
+
 		return {
 			psk: sta_auth_psk(data.iface, data.sta),
 			force_psk: true,
 		};
 	case 'sta_connected':
-		if (data.psk_idx == null)
+		if (data.psk_idx == null || !is_ssid_mpsk(data.iface))
 			return;
 		return sta_auth_cache(data.iface, data.sta, data.psk_idx, data.psk);
 	case 'reload':

feeds/ipq807x_v5.4/hostapd/patches/zzz-ignore-probe-event.patch

@@ -0,0 +1,14 @@
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -934,8 +934,10 @@ void handle_probe_req(struct hostapd_dat
+ 	int ubus_response;
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+-	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
++	    ssi_signal < hapd->iconf->rssi_ignore_probe_request) {
++		hostapd_ubus_notify_rssi(hapd, "rssi-ignore-probe", mgmt->sa, ssi_signal);
+ 		return;
++	}
+ 
+ 	if (len < IEEE80211_HDRLEN)
+ 		return;

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.c

@@ -1944,6 +1944,21 @@ void hostapd_ubus_notify(struct hostapd_data *hapd, const char *type, const u8 *
 	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
 }
 
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi)
+{
+	if (!hapd->ubus.obj.has_subscribers)
+		return;
+
+	if (!addr)
+		return;
+
+	blob_buf_init(&b, 0);
+	blobmsg_add_macaddr(&b, "address", addr);
+	blobmsg_add_u32(&b, "rssi", rssi);
+
+	ubus_notify(ctx, &hapd->ubus.obj, type, b.head, -1);
+}
+
 void hostapd_ubus_notify_csa(struct hostapd_data *hapd, int freq)
 {
 	if (!hapd->ubus.obj.has_subscribers)

feeds/ipq807x_v5.4/hostapd/src/src/ap/ubus.h

@@ -56,6 +56,7 @@ void hostapd_ubus_notify_beacon_report(struct hostapd_data *hapd,
 				       size_t len);
 void hostapd_ubus_notify_radar_detected(struct hostapd_iface *iface, int frequency,
 					int chan_width, int cf1, int cf2);
+void hostapd_ubus_notify_rssi(struct hostapd_data *hapd, const char *type, const u8 *addr, int rssi);
 
 void hostapd_ubus_notify_bss_transition_response(
 	struct hostapd_data *hapd, const u8 *addr, u8 dialog_token, u8 status_code,

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/01_leds

@@ -33,6 +33,11 @@ sonicfi,rap630c-311g|\
 sonicfi,rap630w-311g)
         ucidef_set_led_default "power" "POWER" "pwm:blue" "on"
 	;;
+sonicfi,rap630e)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	ucidef_set_led_default "power" "POWER" "green:power" "on"
+	;;
 edgecore,oap101|\
 edgecore,oap101-6e|\
 edgecore,oap101e|\
@@ -40,6 +45,11 @@ edgecore,oap101e-6e)
 	ucidef_set_led_netdev "wan" "wan" "red:ethernet" "eth1"
         ucidef_set_led_default "power" "POWER" "blue:management" "on"
 	;;
+emplus,wap385c)
+	ucidef_set_led_default "ledr" "LEDR" "sys:red" "on"
+	ucidef_set_led_default "ledg" "LEDG" "sys:green" "on"
+	ucidef_set_led_default "ledb" "LEDB" "sys:blue" "on"
+	;;
 hfcl,ion4x_w|\
 hfcl,ion4xi_w)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/board.d/02_network

@@ -48,6 +48,7 @@ qcom_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"6u@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
+	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w)
 		ucidef_set_interface_wan "eth0"
@@ -67,6 +68,12 @@ qcom_setup_interfaces()
 	glinet,b3000)
 		ucidef_add_switch "switch1" "6u@eth1" "1:wan" "2:lan" "3:lan"
 		;;
+	sonicfi,rap630e)
+		ucidef_set_interface_wan "eth1"
+		ucidef_set_interface_lan "eth0"
+	emplus,wap581)
+		ucidef_set_interface_wan "eth0 eth1"
+		;;
 	esac
 }
 
@@ -103,6 +110,16 @@ qcom_setup_macs()
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 2)
 		;;
+	sonicfi,rap630e)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		lan_mac=$(macaddr_canonicalize $mac)
+		wan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth1 $wan_mac
+		ucidef_set_network_device_mac eth0 $lan_mac
+		ip link set eth1 address $wan_mac
+		ip link set eth0 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -94,6 +94,15 @@ ath11k_generate_macs_gl_b3000() {
 	}
 }
 
+ath11k_generate_macs_rap630e() {
+	touch /lib/firmware/ath11k-macs
+	eth=$(cat /sys/class/net/eth0/address)
+	mac1=$(macaddr_add $eth 2)
+	mac2=$(macaddr_add $eth 3)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 caldata_die() {
 	echo "caldata: " "$*"
 	exit 1
@@ -122,6 +131,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
@@ -129,6 +139,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
+	emplus,wap385c|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
 	optimcloud,d60|\
@@ -139,6 +150,7 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	udaya,a6-od2|\
 	wallys,dr5018|\
 	yuncore,fap655|\
+	emplus,wap581|\
 	glinet,b3000)
 		caldata_extract "0:ART" 0x1000 0x20000  
 		;;
@@ -151,16 +163,19 @@ ath11k/qcn6122/hw1.0/caldata_1.bin)
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
 	edgecore,oap101e-6e|\
+	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	hfcl,ion4xi_w|\
 	wallys,dr5018|\
+	emplus,wap581|\
 	yuncore,fap655)
 		caldata_extract "0:ART" 0x26800 0x20000  
 		;;
@@ -176,6 +191,7 @@ ath11k/qcn6122/hw1.0/caldata_2.bin)
 		;;
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	glinet,b3000)
@@ -211,6 +227,9 @@ ath11k-macs)
 	cybertan,eww631-b1)
 		ath11k_generate_macs_eww631_b1
 		;;
+	sonicfi,rap630e)
+		ath11k_generate_macs_rap630e
+		;;
 	edgecore,eap104|\
 	edgecore,oap101|\
 	edgecore,oap101-6e|\

feeds/ipq807x_v5.4/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -73,9 +73,11 @@ platform_check_image() {
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
 	sonicfi,rap630w-312g|\
+	sonicfi,rap630e|\
 	cybertan,eww631-a1|\
 	cybertan,eww631-b1|\
 	edgecore,eap104|\
+	emplus,wap385c|\
 	wallys,dr5018|\
 	hfcl,ion4x_w|\
 	hfcl,ion4xi_w|\
@@ -90,6 +92,7 @@ platform_check_image() {
 	edgecore,oap101|\
 	edgecore,oap101-6e|\
 	edgecore,oap101e|\
+	emplus,wap581|\
 	edgecore,oap101e-6e)
 		[ "$magic_long" = "73797375" ] && return 0
 		;;
@@ -129,6 +132,7 @@ platform_do_upgrade() {
                 ;;
 	cig,wf186w|\
 	cig,wf186h|\
+	emplus,wap385c|\
 	udaya,a6-id2|\
 	udaya,a6-od2|\
 	wallys,dr5018|\
@@ -136,6 +140,7 @@ platform_do_upgrade() {
 	optimcloud,d60-5g|\
 	optimcloud,d50|\
 	optimcloud,d50-5g|\
+	emplus,wap581|\
 	yuncore,fap655)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
@@ -147,7 +152,8 @@ platform_do_upgrade() {
 	cybertan,eww631-b1|\
 	sonicfi,rap630c-311g|\
 	sonicfi,rap630w-311g|\
-	sonicfi,rap630w-312g)
+	sonicfi,rap630w-312g|\
+	sonicfi,rap630e)
 		boot_part=$(fw_printenv bootfrom | cut  -d = -f2)
 			echo "Current bootfrom is $boot_part"
 			if [[ $boot_part == 1 ]]; then

feeds/ipq807x_v5.4/ipq50xx/config-5.4

@@ -450,6 +450,8 @@ CONFIG_GPIO_DEVRES=y
 # CONFIG_GPIO_SAMA5D2_PIOBU is not set
 CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_USB_DETECT is not set
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 # CONFIG_GSI is not set
 # CONFIG_HABANA_AI is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap385c.dts

@@ -0,0 +1,760 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP385C";
+	compatible = "emplus,wap385c", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet1 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 23 0>;
+
+			ethernet-phy@0 {
+				reg = <24>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x18>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	poe_dc_pins: poe_dc_pins {
+		T2P_DET {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		12V_DET {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pinmux {
+		linux,phandle = <0x4d>;
+		phandle = <0x4d>;
+
+		led_G {
+			pins = "gpio24";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+
+		led_B {
+			pins = "gpio28";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+
+		led_R {
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+			drive-strength = <0x08>;
+		};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@24 {
+			label = "sys:green";
+			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@28 {
+			label = "sys:blue";
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_power: led@38 {
+			label = "sys:red";
+			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap385c:sys:red";
+			default-state = "on";
+		};
+	};
+
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-emplus-wap581.dts

@@ -0,0 +1,831 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP581";
+	compatible = "emplus,wap581", "qcom,ipq5018-mp03.3", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*		   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	   8MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D300000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E200000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4EF00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F000000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*		 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |	  |	      |			 |
+	 * |  Region  | Start Offset |	  Size	   |
+	 * |	  |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |	  16MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |	   4MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |	      |			 |
+	 * |   code/  |  0x4B000000  |	  20MB	   |
+	 * |   data   |	      |			 |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   data   |  0x4C400000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  M3 Dump |  0x4D100000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |   QDSS   |  0x4D200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |	      |			 |
+	 * |  Caldb   |  0x4D300000  |	   2MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   data   |  0x4D500000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  M3 Dump |  0x4E200000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |   QDSS   |  0x4E300000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|	      |			 |
+	 * |  Caldb   |  0x4E400000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   data   |  0x4E900000  |	  13MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  M3 Dump |  0x4F600000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |   QDSS   |  0x4F700000  |	   1MB	   |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|	      |			 |
+	 * |  Caldb   |  0x4F800000  |	   5MB	   |
+	 * +----------+--------------+-------------------------+
+	 * |						   |
+	 * |	    Rest of the memory for Linux	   |
+	 * |						   |
+	 * +===================================================+
+	 */
+
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <&tlmm 0x27 0>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x3e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+					port@4 {
+						port_id = <5>;
+						phy_address = <4>;
+					};
+				};
+			};
+		};
+
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+				led@28 {
+					label = "led_blue";
+					gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@38 {
+					label = "led_red";
+					gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+
+				led@46 {
+					label = "led_green";
+					gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+					default-state = "off";
+				};
+		};
+
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};		
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio28";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_red { /* POWER_LED */
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_green { /* 2G_LED */
+			pins = "gpio46";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+
+
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,rproc = <&q6_wcss_pd1>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x23>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+	qcom,rproc = <&q6_wcss_pd2>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x50>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4D500000 0x4D500000 0x4D300000 0x0 0x0>;
+	qcom,caldb-addr = <0x4E400000 0x4E400000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data1>;
+#else
+	memory-region = <&q6_qcn6122_data1>;
+#endif
+	status = "ok";
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+&pcie_x2 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+	status = "disabled";	
+};
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};

feeds/ipq807x_v5.4/ipq50xx/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-rap630e.dts

@@ -0,0 +1,893 @@
+/dts-v1/;
+/* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Sonicfi RAP630E";
+	compatible = "sonicfi,rap630e", "qcom,ipq5018-mp03.5", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E000000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E200000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4EF00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F000000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4100000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E000000 {
+			no-map;
+			reg = <0x0 0x4E000000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E100000 {
+			no-map;
+			reg = <0x0 0x4E100000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4EF00000 {
+			no-map;
+			reg = <0x0 0x4EF00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F000000 {
+			no-map;
+			reg = <0x0 0x4F000000 0x0 0x100000>;
+		};
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D300000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D500000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E400000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E900000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4F800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4D00000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D500000 {
+			no-map;
+			reg = <0x0 0x4D500000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4E900000 0x0 0xD00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F600000 {
+			no-map;
+			reg = <0x0 0x4F600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F700000 {
+			no-map;
+			reg = <0x0 0x4F700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4F800000 {
+			no-map;
+			reg = <0x0 0x4F800000 0x0 0x500000>;
+		};
+		ramoops: ramoops@50400000 {
+			compatible = "ramoops";
+			reg = <0x0 0x50400000 0x0 0x80000>; // 512KB
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			no-map;
+		};
+
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+			qcom,rx-page-mode = <0>;
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+		};
+
+	};
+
+	qcom,test@0 {
+		status = "ok";
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio22", "gpio24", "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		qspi_data {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	audio_pins: audio_pinmux {
+	};
+
+	leds_pins: leds_pins {
+			led_5g {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_2g {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_sys {
+					pins = "gpio26";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+					};
+			led_onekey {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+			};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+	leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led34 {
+				label = "green:wifi5";
+				gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led33 {
+				label = "green:wifi2";
+				gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led_power: led26 {
+				label = "green:power";
+				gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "default-on";
+				default-state = "on";
+			};
+			led@28 {
+				label = "led_onekey";
+				gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "led_onekey";
+				default-state = "off";
+			};
+		};
+
+		gpio-watchdog {
+			compatible = "linux,wdt-gpio";
+            gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
+			hw_algo = "toggle";
+			hw_margin_ms = <5000>;
+			start-at-boot;
+			always-running;
+			status = "okay";
+		};
+};
+
+&q6v5_wcss {
+	compatible = "qcom,ipq5018-q6-mpd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	firmware = "IPQ5018/q6_fw.mdt";
+	reg = <0x0cd00000 0x4040>,
+		<0x1938000 0x8>,
+		<0x193d204 0x4>;
+	reg-names = "qdsp6",
+			"tcsr-msip",
+			"tcsr-q6";
+	resets = <&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_Q6_BCR>;
+
+	reset-names = "wcss_aon_reset",
+			"wcss_q6_reset";
+
+	clocks = <&gcc GCC_Q6_AXIS_CLK>,
+		<&gcc GCC_WCSS_ECAHB_CLK>,
+		<&gcc GCC_Q6_AXIM_CLK>,
+		<&gcc GCC_Q6_AXIM2_CLK>,
+		<&gcc GCC_Q6_AHB_CLK>,
+		<&gcc GCC_Q6_AHB_S_CLK>,
+		<&gcc GCC_WCSS_AXI_S_CLK>;
+	clock-names = "gcc_q6_axis_clk",
+		"gcc_wcss_ecahb_clk",
+		"gcc_q6_axim_clk",
+		"gcc_q6_axim2_clk",
+		"gcc_q6_ahb_clk",
+		"gcc_q6_ahb_s_clk",
+		"gcc_wcss_axi_s_clk";
+
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>;
+	#else
+		memory-region = <&q6_mem_regions>, <&q6_etr_region>,
+				<&q6_caldb_region>;
+	#endif
+
+	qcom,rproc = <&q6v5_wcss>;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	status = "ok";
+	q6_wcss_pd1: remoteproc_pd1@4ab000 {
+		compatible = "qcom,ipq5018-wcss-ahb-mpd";
+		reg = <0x4ab000 0x20>;
+		reg-names = "rmb";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+					<&wcss_smp2p_in 9 0>,
+					<&wcss_smp2p_in 12 0>,
+					<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		resets = <&gcc GCC_WCSSAON_RESET>,
+				<&gcc GCC_WCSS_BCR>,
+				<&gcc GCC_CE_BCR>;
+		reset-names = "wcss_aon_reset",
+				"wcss_reset",
+				"ce_reset";
+
+		clocks = <&gcc GCC_WCSS_AHB_S_CLK>,
+				<&gcc GCC_WCSS_ACMT_CLK>,
+				<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names = "gcc_wcss_ahb_s_clk",
+					"gcc_wcss_acmt_clk",
+					"gcc_wcss_axi_m_clk";
+
+		qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+					<&wcss_smp2p_out 9>,
+					<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+	#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+	#endif
+
+	};
+
+	q6_wcss_pd2: remoteproc_pd2 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+					<&wcss_smp2p_in 17 0>,
+					<&wcss_smp2p_in 20 0>,
+					<&wcss_smp2p_in 19 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+					<&wcss_smp2p_out 17>,
+					<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+	#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+	#endif
+
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		compatible = "qcom,ipq5018-wcss-pcie-mpd";
+		firmware = "IPQ5018/q6_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+					<&wcss_smp2p_in 25 0>,
+					<&wcss_smp2p_in 28 0>,
+					<&wcss_smp2p_in 27 0>;
+		interrupt-names = "fatal",
+					"ready",
+					"spawn-ack",
+					"stop-ack";
+
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+					<&wcss_smp2p_out 25>,
+					<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	#ifdef	__IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+	#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+	#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+	qcom,caldb-addr = <0x4D300000 0x4D300000 0 0 0>;
+	qcom,caldb-size = <0x200000>;
+	mem-region = <&q6_ipq5018_data>;
+#else
+	memory-region = <&q6_ipq5018_data>;
+#endif
+	nss-radio-priority = <0>;
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,rproc = <&q6_wcss_pd3>;
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+#ifdef __CNSS2__
+	qcom,bdf-addr = <0x4E900000 0x4E900000 0x4E200000 0x0 0x0>;
+	qcom,caldb-addr = <0x4F800000 0x4F800000 0 0 0>;
+	qcom,caldb-size = <0x500000>;
+	mem-region = <&q6_qcn6122_data2>;
+#else
+	memory-region = <&q6_qcn6122_data2>;
+#endif
+	nss-radio-priority = <1>;
+	status = "ok";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+	nss-radio-priority = <1>;
+#endif
+	mem-region = <&q6_qcn6122_data2>;
+	qcom,caldb-size = <0x500000>;
+	status = "disabled";
+};
+
+&dwc_0 {
+       /delete-property/ #phy-cells;
+       /delete-property/ phys;
+       /delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+       status = "ok";
+};
+
+&eud {
+	status = "disabled";
+};
+
+&pcie_x1 {
+	perst-gpio = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_x2 {
+	perst-gpio = <&tlmm 15 GPIO_ACTIVE_LOW>;
+};
+
+
+&pcie_x1_rp {
+	status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+	status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};

feeds/ipq807x_v5.4/ipq50xx/image/ipq50xx.mk

@@ -73,6 +73,17 @@ define Device/sonicfi_rap630w_311g
 endef
 TARGET_DEVICES += sonicfi_rap630w_311g
 
+define Device/sonicfi_rap630e
+  DEVICE_TITLE := Sonicfi RAP630E
+  DEVICE_DTS := qcom-ipq5018-rap630e
+  SUPPORTED_DEVICES := sonicfi,rap630e
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap630e ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap630e
+
 define Device/edgecore_eap104
   DEVICE_TITLE := EdgeCore EAP104
   DEVICE_DTS := qcom-ipq5018-eap104
@@ -154,6 +165,15 @@ define Device/edgecore_oap101e_6e
 endef
 TARGET_DEVICES += edgecore_oap101e_6e
 
+define Device/emplus_wap385c
+  DEVICE_TITLE := Emplus WAP385C
+  DEVICE_DTS := qcom-ipq5018-emplus-wap385c
+  SUPPORTED_DEVICES := emplus,wap385c
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap385c ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+endef
+TARGET_DEVICES += emplus_wap385c
+
 define Device/hfcl_ion4x_w
   DEVICE_TITLE := HFCL ION4x_w
   DEVICE_DTS := qcom-ipq5018-hfcl-ion4x_w
@@ -219,3 +239,16 @@ define Device/glinet_b3000
   IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 endef
 TARGET_DEVICES += glinet_b3000
+
+define Device/emplus_wap581
+  DEVICE_TITLE := Emplus WAP581
+  DEVICE_DTS := qcom-ipq5018-emplus-wap581
+  SUPPORTED_DEVICES := emplus,wap581
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap581 ath11k-firmware-ipq50xx-map-spruce
+  DEVICE_DTS_CONFIG := config@mp03.3
+  IMAGES := sysupgrade.tar nand-factory.bin
+  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand  
+endef
+TARGET_DEVICES += emplus_wap581
+

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/01_leds

@@ -26,6 +26,12 @@ edgecore,eap101)
 	ucidef_set_led_netdev "poe" "poe" "green:wan" "eth0"
         ucidef_set_led_default "power" "POWER" "green:led_pwr" "on"
 	;;
+emplus,wap386v2)
+	ucidef_set_led_default "power" "POWER" "red:power" "on"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
+	;;
 hfcl,ion4xi|\
 hfcl,ion4x|\
 hfcl,ion4x_2|\

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/board.d/02_network

@@ -34,10 +34,10 @@ qcom_setup_interfaces()
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
-       cig,wf660a)
+	cig,wf660a|\
+	emplus,wap386v2)
 		ucidef_set_interface_wan "eth0"		
 		;;
-
 	yuncore,fap650)
 		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
 		ucidef_set_interface_wan "eth4"
@@ -76,6 +76,9 @@ qcom_setup_macs()
 		ucidef_set_network_device_mac eth0 $wan_mac
 		ip link set eth0 address $wan_mac
 		;;
+	emplus,wap386v2)
+		wan_mac=$(cat /sys/class/net/eth0/address)
+		;;
 	yuncore,ax840)
 		wan_mac=$(cat /sys/class/net/eth1/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq60xx/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -76,6 +76,7 @@ case "$FIRMWARE" in
 	cig,wf188n|\
 	cig,wf660a|\
 	edgecore,eap101|\
+	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -109,7 +110,8 @@ ath11k-macs)
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
-	cig,wf188n)
+	cig,wf188n|\
+	emplus,wap386v2)
 		ath11k_generate_macs
 		;;
 	cig,wf660a)

feeds/ipq807x_v5.4/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -122,6 +122,7 @@ platform_check_image() {
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
+	emplus,wap386v2|\
 	hfcl,ion4xi|\
 	hfcl,ion4x|\
 	hfcl,ion4x_2|\
@@ -145,7 +146,8 @@ platform_do_upgrade() {
 	cig,wf660a)
 		spi_nor_emmc_do_upgrade_bootconfig $1
 		;;
-	cig,wf188n)
+	cig,wf188n|\
+	emplus,wap386v2)
 		[ -f /proc/boot_info/rootfs/upgradepartition ] && {
 			CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
 			CI_BOOTCFG=1

feeds/ipq807x_v5.4/ipq60xx/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-emplus-wap386v2.dts

@@ -0,0 +1,356 @@
+/*
+ * Copyright (c) 2019-2021, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+#include "ipq6018-cpr-regulator.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Emplus WAP386 v2";
+	compatible = "emplus,wap386v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	gpio-reserved-ranges = <20 1>;
+
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio30";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <3>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <4>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x08>; /* lan port bitmap */
+		switch_wan_bmp = <0x10>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <2>;
+				phy_address = <3>;
+			};
+			port@1 {
+				port_id = <3>;
+				phy_address = <4>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@9 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power: led@28 {
+			label = "red:power";
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:red:power";
+			default-state = "on";
+		};
+		led@29 {
+			label = "blue:wan";
+			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:eth";
+			default-state = "on";
+		};
+		led@30 {
+			label = "blue:wifi2";
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:2g";
+			default-state = "on";
+		};
+		led@31 {
+			label = "blue:wifi5";
+			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "wap386v2:blue:5g";
+			default-state = "on";
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x30>;
+};
+
+&pcie_phy {
+	status = "ok";
+};
+
+&pcie0 {
+#if defined(__CNSS2__)
+	status = "ok";
+#endif
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&qpic_nand {
+	status = "ok";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&CPU0 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU1 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU2 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU3 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1320000  1100000
+		1440000  1100000
+		1608000  1100000
+		1800000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&rpm_glink {
+	status = "disabled";
+};

feeds/ipq807x_v5.4/ipq60xx/image/ipq60xx.mk

@@ -76,6 +76,15 @@ define Device/edgecore_eap101
 endef
 TARGET_DEVICES += edgecore_eap101
 
+define Device/emplus_wap386v2
+  DEVICE_TITLE := Emplus WAP386v2
+  DEVICE_DTS := qcom-ipq6018-emplus-wap386v2
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := emplus,wap386v2
+  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-env
+endef
+TARGET_DEVICES += emplus_wap386v2
+
 define Device/indio_um-310ax-v1
   DEVICE_TITLE := Indio UM-310AX V1
   DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/01_leds

@@ -20,7 +20,14 @@ edgecore,oap103)
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy1tpt"
         ucidef_set_led_wlan "power" "POWER" "green:power" "default-on"
 	;;
+emplus,wap380c)
+	ucidef_set_led_default "power"  "POWER"  "ipq::led0" "on"
+	ucidef_set_led_netdev  "wan"    "WAN"    "ipq::led1" "eth0"
+	ucidef_set_led_wlan    "wlan2g" "WLAN2G" "ipq::led2" "phy1tpt"
+	ucidef_set_led_wlan    "wlan5g" "WLAN5G" "ipq::led3" "phy0tpt"
+	;;
 sonicfi,rap630w-311g|\
+sonicfi,rap650c|\
 cybertan,eww631-b1)
 	ucidef_set_led_default "power" "POWER" "sys:blue" "on"
 	;;

feeds/ipq807x_v5.4/ipq807x/base-files/etc/board.d/02_network

@@ -12,6 +12,7 @@ qcom_setup_interfaces()
 	ucidef_add_switch_attr "switch0" "reset" "false"
 
 	case $board in
+	emplus,wap380c|\
 	tplink,ex227|\
 	tplink,ex447)
 		ucidef_set_interface_wan "eth0"
@@ -24,6 +25,7 @@ qcom_setup_interfaces()
 	edgecore,eap102|\
 	edgecore,oap102|\
 	edgecore,oap103|\
+	sonicfi,rap650c|\
 	cig,wf196)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
@@ -50,6 +52,16 @@ qcom_setup_macs()
 		ip link set eth1 address $lan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	sonicfi,rap650c)
+		mac=$(fw_printenv -n BaseMacAddress)
+		[ -z "$mac" ] && return;
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -16,6 +16,20 @@ ath11k_generate_macs() {
 	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
+ath11k_generate_macs_rap650c() {
+	mac=$(fw_printenv -n BaseMacAddress)
+	[ -z "$mac" ] && return;
+
+	touch /lib/firmware/ath11k-macs
+	eth=$(macaddr_canonicalize $mac)
+	mac1=$(macaddr_add $eth 3)
+	mac2=$(macaddr_add $eth 2)
+	mac3=$(macaddr_add $eth 4)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac3//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 ath11k_generate_macs_wf196() {
 	touch /lib/firmware/ath11k-macs
 	mac=$(grep BaseMacAddress= /dev/mtd18 | cut -dx -f2)
@@ -58,11 +72,13 @@ case "$FIRMWARE" in
 	edgecore,oap102 |\
 	edgecore,oap103 |\
 	edgecore,eap106 |\
+	emplus,wap380c|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
 	tplink,ex447|\
 	yuncore,ax840|\
+	sonicfi,rap650c|\
 	sercomm,wallaby)
                 caldata_extract "0:ART" 0x1000 0x20000
 		;;
@@ -97,6 +113,9 @@ ath11k-macs)
 	cig,wf196)
 		ath11k_generate_macs_wf196
 		;;
+	sonicfi,rap650c)
+		ath11k_generate_macs_rap650c
+		;;
 	esac
 	;;
 ath11k/IPQ8074/hw2.0/board.bin)

feeds/ipq807x_v5.4/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-pdev-stats

@@ -10,7 +10,8 @@ case "$board" in
         ln -s /sys/kernel/debug/ath11k/ipq6018\ hw1.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;
     "edgecore,eap102"|\
-    "edgecore,oap103")
+    "edgecore,oap103"|\
+    "sonicfi,rap650c")
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac0/fw_stats/pdev_stats /tmp/pdev_stats_phy5g
         ln -s /sys/kernel/debug/ath11k/ipq8074\ hw2.0/mac1/fw_stats/pdev_stats /tmp/pdev_stats_phy2g
         ;;

feeds/ipq807x_v5.4/ipq807x/base-files/lib/upgrade/platform.sh

@@ -29,6 +29,8 @@ platform_check_image() {
 	edgecore,oap102|\
 	edgecore,oap103|\
 	edgecore,eap106|\
+	emplus,wap380c|\
+	sonicfi,rap650c|\
 	tplink,ex227|\
 	tplink,ex447)
 		[ "$magic_long" = "73797375" ] && return 0
@@ -47,7 +49,8 @@ platform_do_upgrade() {
 	tplink,ex227)	
 		qca_do_upgrade "$1"
 		;;
-        cig,wf196)
+	cig,wf196|\
+	emplus,wap380c)
                 [ -f /proc/boot_info/rootfs/upgradepartition ] && {
                         CI_UBIPART="$(cat /proc/boot_info/rootfs/upgradepartition)"
                         CI_BOOTCFG=1
@@ -83,5 +86,17 @@ platform_do_upgrade() {
 		fi
 		nand_upgrade_tar "$1"
 		;;
+	sonicfi,rap650c)
+		boot_part=$(fw_printenv -n bootfrom)
+		[ ${#boot_part} -eq 0 ] && boot_part=0
+		echo "Current bootfrom is $boot_part"
+		if [[ $boot_part == 1 ]]; then
+			CI_UBIPART="rootfs"
+			CI_FWSETENV="bootfrom 0"
+		elif [[ $boot_part == 0 ]]; then
+			CI_UBIPART="rootfs_1"
+			CI_FWSETENV="bootfrom 1"
+		fi
+		nand_upgrade_tar "$1"
 	esac
 }

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-rap650c.dts

@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "SonicFi RAP650C";
+	compatible = "sonicfi,rap650c", "qcom,ipq8074-ap-hk09", "qcom,ipq8074";
+	qcom,msm-id = <0x157 0x0>, <0x187 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio57";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			usb_mux_sel_pins: usb_mux_pins {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			pcie0_pins: pcie_pins {
+				pcie0_rst {
+					pins = "gpio58";
+					function = "pcie0_rst";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				pcie0_wake {
+					pins = "gpio59";
+					function = "pcie0_wake";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio25";
+					function = "gpio";
+					bias-pull-up;
+				};
+				mux_3 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			led_pins: led_pins {
+				red {
+					pins = "gpio0";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				green {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+
+				blue {
+					pins = "gpio9";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+			};
+
+			spi_3_pins: spi_3_pins {
+				mux {
+					pins = "gpio50", "gpio52", "gpio53";
+					function = "blsp3_spi";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				spi_cs {
+					pins = "gpio22";
+					function = "blsp3_spi2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				quartz_interrupt {
+					pins = "gpio47";
+					function = "gpio";
+					input;
+					bias-disable;
+				};
+				quartz_reset {
+					pins = "gpio21";
+					function = "gpio";
+					output-low;
+					bias-disable;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <5>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <24>;
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001a00 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@78b8000 {
+			status = "ok";
+			pinctrl-0 = <&spi_3_pins>;
+			pinctrl-names = "default";
+			cs-select = <2>;
+			quartz-reset-gpio = <&tlmm 21 1>;
+
+			spidev3: spi@3 {
+				  compatible = "qti,spidev";
+				  reg = <0>;
+				  spi-max-frequency = <24000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		usb3@8A00000 {
+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
+		phy@84000 {
+			status = "ok";
+		};
+
+		phy@86000 {
+			status = "ok";
+		};
+
+		pci@20000000 {
+			perst-gpio = <&tlmm 58 1>;
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&led_pins>;
+			pinctrl-names = "default";
+
+			red {
+				label = "sys:red";
+				gpio = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			green {
+				label = "sys:green";
+				gpio = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_power: blue {
+				label = "sys:blue";
+				gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 37 0 &tlmm 25 0 &tlmm 44 0>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <24>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <24>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		nss-macsec0 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x18>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			phy_access_mode = <0>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&wifi0 {
+	qcom,board_id = <0x90>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};

feeds/ipq807x_v5.4/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wap380c.dts

@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Emplus WAP380C";
+	compatible = "emplus,wap380c", "qcom,ipq8074-ap-hk07", "qcom,ipq8074";
+	qcom,msm-id = <0x143 0x0>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp6";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		qti: ledc@191E000  {
+			compatible = "qti,ledc";
+			reg = <0x191E000 0x20070>;
+			reg-names = "ledc_base_addr";
+			qti,tcsr_ledc_values = <0x0320193 0x00000000 \
+									0x00000000 0x00000000 \
+									0x00000000 0xFFFFFFFF \
+									0xFFFF7FFF 0xFFFFFFFF \
+									0x007D0820 0x00000000 \
+									0x10482094 0x03FFFFE1>;
+			qti,ledc_blink_indices_cnt = <6>;
+			qti,ledc_blink_indices = <15 14 13 12 11 10>;
+			qti,ledc_blink_idx_src_pair = <5 20>;
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			button_pins: button_pins {
+				reset_button {
+					pins = "gpio52";
+					function = "gpio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			mdio_pins: mdio_pinmux {
+				mux_0 {
+					pins = "gpio68";
+					function = "mdc";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_1 {
+					pins = "gpio69";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio44";
+					function = "gpio";
+					bias-pull-up;
+				};
+			};
+
+			ledc_pins: ledc_pinmux {
+				led_clk {
+					pins = "gpio18";
+					function = "led0";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_data {
+					pins = "gpio19";
+					function = "led1";
+					drive-strength = <8>;
+					bias-pull-down;
+				};
+				led_clr {
+					pins = "gpio20";
+					function = "led2";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		serial@78b3000 {
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			status = "ok";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+
+			m25p80@0 {
+				  compatible = "n25q128a11";
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			};
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&button_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 43 1 &tlmm 44 1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <28>;
+			};
+		};
+
+		ess-switch@3a000000 {
+			switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+			switch_lan_bmp = <0x3e>; /* lan port bitmap */
+			switch_wan_bmp = <0x40>; /* wan port bitmap */
+			switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+			switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+			switch_mac_mode2 = <0xf>; /* mac mode for uniphy instance2*/
+			bm_tick_mode = <0>; /* bm tick mode */
+			tm_tick_mode = <0>; /* tm tick mode */
+			qcom,port_phyinfo {
+				port@0 {
+					port_id = <1>;
+					phy_address = <0>;
+				};
+				port@1 {
+					port_id = <2>;
+					phy_address = <1>;
+				};
+				port@2 {
+					port_id = <3>;
+					phy_address = <2>;
+				};
+				port@3 {
+					port_id = <4>;
+					phy_address = <3>;
+				};
+				port@4 {
+					port_id = <5>;
+					phy_address = <4>;
+				};
+				port@5 {
+					port_id = <6>;
+					phy_address = <28>;
+					port_mac_sel = "QGMAC_PORT";
+				};
+			};
+			port_scheduler_resource {
+				port@0 {
+					port_id = <0>;
+					ucast_queue = <0 143>;
+					mcast_queue = <256 271>;
+					l0sp = <0 35>;
+					l0cdrr = <0 47>;
+					l0edrr = <0 47>;
+					l1cdrr = <0 7>;
+					l1edrr = <0 7>;
+				};
+				port@1 {
+					port_id = <1>;
+					ucast_queue = <144 159>;
+					mcast_queue = <272 275>;
+					l0sp = <36 39>;
+					l0cdrr = <48 63>;
+					l0edrr = <48 63>;
+					l1cdrr = <8 11>;
+					l1edrr = <8 11>;
+				};
+				port@2 {
+					port_id = <2>;
+					ucast_queue = <160 175>;
+					mcast_queue = <276 279>;
+					l0sp = <40 43>;
+					l0cdrr = <64 79>;
+					l0edrr = <64 79>;
+					l1cdrr = <12 15>;
+					l1edrr = <12 15>;
+				};
+				port@3 {
+					port_id = <3>;
+					ucast_queue = <176 191>;
+					mcast_queue = <280 283>;
+					l0sp = <44 47>;
+					l0cdrr = <80 95>;
+					l0edrr = <80 95>;
+					l1cdrr = <16 19>;
+					l1edrr = <16 19>;
+				};
+				port@4 {
+					port_id = <4>;
+					ucast_queue = <192 207>;
+					mcast_queue = <284 287>;
+					l0sp = <48 51>;
+					l0cdrr = <96 111>;
+					l0edrr = <96 111>;
+					l1cdrr = <20 23>;
+					l1edrr = <20 23>;
+				};
+				port@5 {
+					port_id = <5>;
+					ucast_queue = <208 223>;
+					mcast_queue = <288 291>;
+					l0sp = <52 55>;
+					l0cdrr = <112 127>;
+					l0edrr = <112 127>;
+					l1cdrr = <24 27>;
+					l1edrr = <24 27>;
+				};
+				port@6 {
+					port_id = <6>;
+					ucast_queue = <224 239>;
+					mcast_queue = <292 295>;
+					l0sp = <56 59>;
+					l0cdrr = <128 143>;
+					l0edrr = <128 143>;
+					l1cdrr = <28 31>;
+					l1edrr = <28 31>;
+				};
+				port@7 {
+					port_id = <7>;
+					ucast_queue = <240 255>;
+					mcast_queue = <296 299>;
+					l0sp = <60 63>;
+					l0cdrr = <144 159>;
+					l0edrr = <144 159>;
+					l1cdrr = <32 35>;
+					l1edrr = <32 35>;
+				};
+			};
+			port_scheduler_config {
+				port@0 {
+					port_id = <0>;
+					l1scheduler {
+						group@0 {
+							sp = <0 1>; /*L0 SPs*/
+							/*cpri cdrr epri edrr*/
+							cfg = <0 0 0 0>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							/*unicast queues*/
+							ucast_queue = <0 4 8>;
+							/*multicast queues*/
+							mcast_queue = <256 260>;
+							/*sp cpri cdrr epri edrr*/
+							cfg = <0 0 0 0 0>;
+						};
+						group@1 {
+							ucast_queue = <1 5 9>;
+							mcast_queue = <257 261>;
+							cfg = <0 1 1 1 1>;
+						};
+						group@2 {
+							ucast_queue = <2 6 10>;
+							mcast_queue = <258 262>;
+							cfg = <0 2 2 2 2>;
+						};
+						group@3 {
+							ucast_queue = <3 7 11>;
+							mcast_queue = <259 263>;
+							cfg = <0 3 3 3 3>;
+						};
+					};
+				};
+				port@1 {
+					port_id = <1>;
+					l1scheduler {
+						group@0 {
+							sp = <36>;
+							cfg = <0 8 0 8>;
+						};
+						group@1 {
+							sp = <37>;
+							cfg = <1 9 1 9>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <144>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <272>;
+							mcast_loop_pri = <4>;
+							cfg = <36 0 48 0 48>;
+						};
+					};
+				};
+				port@2 {
+					port_id = <2>;
+					l1scheduler {
+						group@0 {
+							sp = <40>;
+							cfg = <0 12 0 12>;
+						};
+						group@1 {
+							sp = <41>;
+							cfg = <1 13 1 13>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <160>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <276>;
+							mcast_loop_pri = <4>;
+							cfg = <40 0 64 0 64>;
+						};
+					};
+				};
+				port@3 {
+					port_id = <3>;
+					l1scheduler {
+						group@0 {
+							sp = <44>;
+							cfg = <0 16 0 16>;
+						};
+						group@1 {
+							sp = <45>;
+							cfg = <1 17 1 17>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <176>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <280>;
+							mcast_loop_pri = <4>;
+							cfg = <44 0 80 0 80>;
+						};
+					};
+				};
+				port@4 {
+					port_id = <4>;
+					l1scheduler {
+						group@0 {
+							sp = <48>;
+							cfg = <0 20 0 20>;
+						};
+						group@1 {
+							sp = <49>;
+							cfg = <1 21 1 21>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <192>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <284>;
+							mcast_loop_pri = <4>;
+							cfg = <48 0 96 0 96>;
+						};
+					};
+				};
+				port@5 {
+					port_id = <5>;
+					l1scheduler {
+						group@0 {
+							sp = <52>;
+							cfg = <0 24 0 24>;
+						};
+						group@1 {
+							sp = <53>;
+							cfg = <1 25 1 25>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <208>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <288>;
+							mcast_loop_pri = <4>;
+							cfg = <52 0 112 0 112>;
+						};
+					};
+				};
+				port@6 {
+					port_id = <6>;
+					l1scheduler {
+						group@0 {
+							sp = <56>;
+							cfg = <0 28 0 28>;
+						};
+						group@1 {
+							sp = <57>;
+							cfg = <1 29 1 29>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <224>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <292>;
+							mcast_loop_pri = <4>;
+							cfg = <56 0 128 0 128>;
+						};
+					};
+				};
+				port@7 {
+					port_id = <7>;
+					l1scheduler {
+						group@0 {
+							sp = <60>;
+							cfg = <0 32 0 32>;
+						};
+						group@1 {
+							sp = <61>;
+							cfg = <1 33 1 33>;
+						};
+					};
+					l0scheduler {
+						group@0 {
+							ucast_queue = <240>;
+							ucast_loop_pri = <16>;
+							mcast_queue = <296>;
+							cfg = <60 0 144 0 144>;
+						};
+					};
+				};
+			};
+		};
+
+		dp6 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			qcom,id = <6>;
+			reg = <0x3a001800 0x200>;
+			qcom,mactype = <0>;
+			local-mac-address = [000000000000];
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			phy-mode = "sgmii";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio>;
+		};
+	};
+};
+
+&apc_cpr {
+	/* Same CPR configuration as OAK */
+	compatible = "qcom,cpr4-ipq817x-apss-regulator";
+
+	thread@0 {
+		apc_vreg: regulator {
+			regulator-min-microvolt = <1>;
+			regulator-max-microvolt = <2>;
+			qcom,cpr-fuse-corners = <2>;
+			qcom,cpr-corners = <3>;
+			qcom,cpr-speed-bin-corners = <3>;
+			qcom,cpr-corner-fmax-map = <1 3>;
+
+			qcom,cpr-voltage-ceiling =
+				<840000 904000 944000>;
+			qcom,cpr-voltage-floor =
+				<592000 648000 712000>;
+			qcom,corner-frequencies =
+				<1017600000 1382400000 1382400000>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>,
+				< 0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				< 20000  26000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 =
+				/* Speed bin 0; CPR rev 0..7 */
+				<     0      0>,
+				<     0   7000>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>,
+				<     0      0>;
+
+			qcom,cpr-floor-to-ceiling-max-range =
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>,
+				< 40000 40000 40000>;
+		};
+	};
+};
+
+&npu_cpr {
+	status = "disabled";
+};
+
+&nss0 {
+	qcom,low-frequency = <187200000>;
+	qcom,mid-frequency = <748800000>;
+	qcom,max-frequency = <1497600000>;
+};
+
+&nss0 {
+	npu-supply = <&dummy_reg>;
+	mx-supply = <&dummy_reg>;
+};
+
+&wifi0 {
+	qcom,board_id = <0x92>;
+};
+
+&wifi1 {
+	qcom,board_id = <0x290>;
+};
+
+&ledc {
+	pinctrl-0 = <&ledc_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+
+	led_power: led0 {
+		label = "ipq::led0";
+		linux,default-trigger = "default-on";
+	};
+
+	wan: led1 {
+		label = "ipq::led1";
+		linux,default-trigger = "netdev";
+	};
+
+	wifi2g: led2 {
+		label = "ipq::led2";
+		linux,default-trigger = "phy1tpt";
+	};
+
+	wifi5g: led3 {
+		label = "ipq::led3";
+		linux,default-trigger = "phy0tpt";
+	};
+
+	led4 {
+		label = "ipq::led4";
+		linux,default-trigger = "none";
+	};
+
+	led5 {
+		label = "ipq::led5";
+		linux,default-trigger = "none";
+	};
+};

feeds/ipq807x_v5.4/ipq807x/image/ipq807x.mk

@@ -57,6 +57,26 @@ define Device/edgecore_eap106
 endef
 #TARGET_DEVICES += edgecore_eap106
 
+define Device/emplus_wap380c
+  DEVICE_TITLE := Emplus WAP380C
+  DEVICE_DTS := qcom-ipq807x-wap380c
+  DEVICE_DTS_CONFIG=config@hk07
+  SUPPORTED_DEVICES := emplus,wap380c
+  DEVICE_PACKAGES := ath11k-wifi-emplus-wap380c uboot-envtools
+endef
+TARGET_DEVICES += emplus_wap380c
+
+define Device/sonicfi_rap650c
+  DEVICE_TITLE := SonicFi RAP650C
+  DEVICE_DTS := qcom-ipq807x-rap650c
+  DEVICE_DTS_CONFIG=config@hk09
+  SUPPORTED_DEVICES := sonicfi,rap650c
+  DEVICE_PACKAGES := ath11k-wifi-sonicfi-rap650c uboot-envtools
+  IMAGES := sysupgrade.tar nand-factory.bin nand-factory.ubi
+  IMAGE/nand-factory.ubi := append-ubi
+endef
+TARGET_DEVICES += sonicfi_rap650c
+
 define Device/tplink_ex227
   DEVICE_TITLE := TP-Link EX227
   DEVICE_DTS := qcom-ipq807x-ex227

feeds/ipq807x_v5.4/mac80211/patches/pending/999-remove-kernel-warn-msg-abnormal-he-nss-value.patch

@@ -6,7 +6,7 @@
  		return 0;
 -	if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8))
 +	if (rate->nss < 1 || rate->nss > 8) {
-+		printk_once(1, "invalid rate->nss: %d\n", rate->nss);
++		printk_once(KERN_WARNING "cfg80211_calculate_bitrate_he: invalid rate->nss: %d\n", rate->nss);
  		return 0;
 -
 +	}

feeds/ipq807x_v5.4/mac80211/patches/pending/a-003-fix-roaming-firmware-crash.patch

@@ -0,0 +1,119 @@
+--- a/drivers/net/wireless/ath/ath11k/peer.c
++++ b/drivers/net/wireless/ath/ath11k/peer.c
+@@ -819,10 +819,7 @@ int ath11k_peer_delete(struct ath11k *ar
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+ 		mutex_unlock(&ar->ab->base_ast_lock);
+ #endif
+-		ath11k_warn(ar->ab,
+-			    "failed to find peer vdev_id %d addr %pM in delete\n",
+-			    vdev_id, addr);
+-		return -EINVAL;
++		return 0;
+         }
+ 
+ #ifdef CPTCFG_ATH11K_NSS_SUPPORT
+@@ -883,6 +880,7 @@ int ath11k_peer_create(struct ath11k *ar
+ 	struct ieee80211_vif *vif = arvif->vif;
+ 	struct ath11k_sta *arsta;
+ 	int ret, fbret;
++	u8 vdev_id = 0;
+ 
+ 	lockdep_assert_held(&ar->conf_mutex);
+ 
+@@ -891,20 +889,21 @@ int ath11k_peer_create(struct ath11k *ar
+ 			    "failed to create peer due to insufficient peer entry resource in firmware\n");
+ 		return -ENOBUFS;
+ 	}
++
+ 	mutex_lock(&ar->ab->tbl_mtx_lock);
+ 	spin_lock_bh(&ar->ab->base_lock);
+ 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
++	if (peer)
++		vdev_id = peer->vdev_id;
++	spin_unlock_bh(&ar->ab->base_lock);
++	mutex_unlock(&ar->ab->tbl_mtx_lock);
++
+ 	if (peer) {
+-		if (peer->vdev_id == param->vdev_id) {
+-			spin_unlock_bh(&ar->ab->base_lock);
+-			mutex_unlock(&ar->ab->tbl_mtx_lock);
++		if (vdev_id == param->vdev_id)
+ 			return -EINVAL;
+-		}
+-		ath11k_peer_rhash_delete(ar->ab, peer);
+-	}
+ 
+-	spin_unlock_bh(&ar->ab->base_lock);
+-	mutex_unlock(&ar->ab->tbl_mtx_lock);
++		ath11k_peer_delete(ar, vdev_id, param->peer_addr);
++	}
+ 
+ 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
+ 	if (ret) {
+--- a/drivers/net/wireless/ath/ath11k/dp.c
++++ b/drivers/net/wireless/ath/ath11k/dp.c
+@@ -28,7 +28,7 @@ void ath11k_dp_peer_cleanup(struct ath11
+ 	spin_lock_bh(&ab->base_lock);
+ 	peer = ath11k_peer_find(ab, vdev_id, addr);
+ 	if (!peer) {
+-		ath11k_warn(ab, "failed to lookup peer %pM on vdev %d\n",
++		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to lookup peer %pM on vdev %d\n",
+ 			    addr, vdev_id);
+ 		spin_unlock_bh(&ab->base_lock);
+ 		return;
+--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
++++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
+@@ -1204,9 +1204,9 @@ int ath11k_dp_rx_ampdu_stop(struct ath11
+ 
+ 	peer = ath11k_peer_find(ab, vdev_id, params->sta->addr);
+ 	if (!peer) {
+-		ath11k_warn(ab, "failed to find the peer to stop rx aggregation\n");
++		ath11k_dbg(ab, ATH11K_DBG_MAC, "failed to find the peer to stop rx aggregation\n");
+ 		spin_unlock_bh(&ab->base_lock);
+-		return -ENOENT;
++		return 0;
+ 	}
+ 
+ 	paddr = peer->rx_tid[params->tid].paddr;
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -4075,7 +4075,7 @@ static int ath11k_clear_peer_keys(struct
+ 	peer = ath11k_peer_find(ab, arvif->vdev_id, addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ab->base_lock);
+-		return -ENOENT;
++		return 0;
+ 	}
+ 	for (i = 0; i < ARRAY_SIZE(keys); i++) {
+ 		keys[i]= peer->keys[i];
+@@ -4325,6 +4325,10 @@ static int ath11k_mac_op_set_key(struct
+ 
+ 	spin_lock_bh(&ab->base_lock);
+ 	peer = ath11k_peer_find(ab, arvif->vdev_id, peer_addr);
++	if (!peer && cmd == DISABLE_KEY) {
++		ret = 0;
++		goto unlock;
++	}
+ 
+ 	/* TODO: Check if vdev specific security cfg is mandatory */
+ 	ret = ath11k_nss_vdev_set_cmd(arvif, ATH11K_NSS_WIFI_VDEV_SECURITY_TYPE_CMD, key->cipher);
+@@ -5961,7 +5965,7 @@ static void ath11k_mac_op_sta_rc_update(
+ 	peer = ath11k_peer_find(ar->ab, arvif->vdev_id, sta->addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ar->ab->base_lock);
+-		ath11k_warn(ar->ab, "mac sta rc update failed to find peer %pM on vdev %i\n",
++		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac sta rc update failed to find peer %pM on vdev %i\n",
+ 			    sta->addr, arvif->vdev_id);
+ 		return;
+ 	}
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -8425,7 +8425,7 @@ static void ath11k_peer_sta_kickout_even
+ 	peer = ath11k_peer_find_by_addr(ab, arg.mac_addr);
+ 	if (!peer) {
+ 		spin_unlock_bh(&ab->base_lock);
+-		ath11k_warn(ab, "peer not found %pM\n",
++		ath11k_dbg(ab, ATH11K_DBG_WMI, "peer not found %pM\n",
+ 			    arg.mac_addr);
+ 		goto exit;
+ 	}

feeds/mediatek-sdk/mac80211/files/lib/wifi/mac80211.sh

@@ -146,6 +146,40 @@ check_board_phy() {
 	fi
 }
 
+is_morse_phy() {
+	local dev="$1"
+	local morse_path="/sys/class/ieee80211/${dev}/device/morse/"
+
+	if [ -d "$morse_path" ]; then
+		return 0  # This is a Morse PHY
+	else
+		return 1  # Not a Morse PHY
+	fi
+}
+
+# Set up Morse-specific wireless configuration
+setup_morse_wireless() {
+	local dev="$1"
+	local name="$2"
+
+	# Create Morse-specific wireless configuration with exact settings
+	uci -q batch <<-EOF
+		set wireless.${name}=wifi-device
+		set wireless.${name}.disabled='0'
+		set wireless.${name}.mode='ap'
+		set wireless.${name}.type='morse'
+		set wireless.${name}.path='platform/11009000.spi/spi_master/spi1/spi1.0'
+		set wireless.${name}.channel='12'
+		set wireless.${name}.hwmode='a'
+		set wireless.${name}.band='s1g'
+		set wireless.${name}.htmode='8'
+		set wireless.${name}.country='US'
+		set wireless.${name}.channels=''
+EOF
+
+	uci -q commit wireless
+}
+
 detect_mac80211() {
 	devidx=0
 	config_load wireless
@@ -158,13 +192,6 @@ detect_mac80211() {
 
 		dev="${_dev##*/}"
 
-		mode_band=""
-		channel=""
-		htmode=""
-		ht_capab=""
-
-		get_band_defaults "$dev"
-
 		path="$(iwinfo nl80211 path "$dev")"
 		macaddr="$(cat /sys/class/ieee80211/${dev}/macaddress)"
 
@@ -183,35 +210,51 @@ detect_mac80211() {
 
 		name="radio${devidx}"
 		devidx=$(($devidx + 1))
-		case "$dev" in
-			phy*)
-				if [ -n "$path" ]; then
-					dev_id="set wireless.${name}.path='$path'"
-				else
-					dev_id="set wireless.${name}.macaddr='$macaddr'"
-				fi
-				;;
-			*)
-				dev_id="set wireless.${name}.phy='$dev'"
-				;;
-		esac
 
-		uci -q batch <<-EOF
-			set wireless.${name}=wifi-device
-			set wireless.${name}.type=mac80211
-			${dev_id}
-			set wireless.${name}.channel=${channel}
-			set wireless.${name}.band=${mode_band}
-			set wireless.${name}.htmode=$htmode
-			set wireless.${name}.disabled=1
+		# Check if this is a Morse PHY
+		if is_morse_phy "$dev"; then
+			# Use dedicated Morse configuration
+			setup_morse_wireless "$dev" "$name"
+		else
+			# Standard wireless configuration for non-Morse devices
+			mode_band=""
+			channel=""
+			htmode=""
+			ht_capab=""
 
-			set wireless.default_${name}=wifi-iface
-			set wireless.default_${name}.device=${name}
-			set wireless.default_${name}.network=lan
-			set wireless.default_${name}.mode=ap
-			set wireless.default_${name}.ssid=OpenWrt
-			set wireless.default_${name}.encryption=none
+			# Get default settings for standard devices
+			get_band_defaults "$dev"
+
+			case "$dev" in
+				phy*)
+					if [ -n "$path" ]; then
+						dev_id="set wireless.${name}.path='$path'"
+					else
+						dev_id="set wireless.${name}.macaddr='$macaddr'"
+					fi
+					;;
+				*)
+					dev_id="set wireless.${name}.phy='$dev'"
+					;;
+			esac
+
+			uci -q batch <<-EOF
+				set wireless.${name}=wifi-device
+				set wireless.${name}.type=mac80211
+				${dev_id}
+				set wireless.${name}.channel=${channel}
+				set wireless.${name}.band=${mode_band}
+				set wireless.${name}.htmode=$htmode
+				set wireless.${name}.disabled=1
+
+				set wireless.default_${name}=wifi-iface
+				set wireless.default_${name}.device=${name}
+				set wireless.default_${name}.network=lan
+				set wireless.default_${name}.mode=ap
+				set wireless.default_${name}.ssid=OpenWrt
+				set wireless.default_${name}.encryption=none
 EOF
-		uci -q commit wireless
+			uci -q commit wireless
+		fi
 	done
 }

feeds/mediatek-sdk/mac80211/patches/subsys/999-9031-morse-mac80211-disable-robust-management-frame-without-sta-check.patch

@@ -0,0 +1,13 @@
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -4193,8 +4196,10 @@
+	case NL80211_IFTYPE_STATION:
+		if (!bssid && !sdata->u.mgd.use_4addr)
+			return false;
++#if 0
+		if (ieee80211_is_robust_mgmt_frame(skb) && !rx->sta)
+			return false;
++#endif
+		if (multicast)
+			return true;
+		return ether_addr_equal(sdata->vif.addr, hdr->addr1);

feeds/mediatek-sdk/mac80211/patches/subsys/999-9046-morse-mac80211_ndp_block_ack.patch

@@ -0,0 +1,443 @@
+--- a/include/linux/ieee80211.h
++++ b/include/linux/ieee80211.h
+@@ -3434,6 +3434,9 @@
+ 	WLAN_ACTION_ADDBA_REQ = 0,
+ 	WLAN_ACTION_ADDBA_RESP = 1,
+ 	WLAN_ACTION_DELBA = 2,
++	WLAN_ACTION_NDP_ADDBA_REQ = 128,
++	WLAN_ACTION_NDP_ADDBA_RESP = 129,
++	WLAN_ACTION_NDP_DELBA = 130,    
+ };
+ 
+ /* BACK (block-ack) parties */
+
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -125,6 +125,13 @@
+  * via the usual ieee80211_tx_dequeue).
+  */
+ 
++ /** Morse Micro patches which add functionality that the driver needs to know about, can be
++  * signalled by adding a define here.
++  */
++
++ /** mac80211 has the capability to negotiate NDP block acknowledgements */
++ #define MORSE_MAC80211_S1G_FEATURE_NDP_BLOCKACK
++
+ struct device;
+ 
+ /**
+@@ -2437,7 +2444,10 @@
+  *
+  * @IEEE80211_HW_DETECTS_COLOR_COLLISION: HW/driver has support for BSS color
+  *	collision detection and doesn't need it in software.
+- *
++ * 
++ + @IEEE80211_HW_SUPPORTS_NDP_BLOCKACK: Hardware supports 11ah A-MPDU aggregation with NDP block
++ +  ACKs
++ +
+  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
+  */
+ enum ieee80211_hw_flags {
+@@ -2494,6 +2504,7 @@
+ 	IEEE80211_HW_SUPPORTS_RX_DECAP_OFFLOAD,
+ 	IEEE80211_HW_SUPPORTS_CONC_MON_RX_DECAP,
+ 	IEEE80211_HW_DETECTS_COLOR_COLLISION,
++	IEEE80211_HW_SUPPORTS_NDP_BLOCKACK,
+ 
+ 	/* keep last, obviously */
+ 	NUM_IEEE80211_HW_FLAGS
+@@ -3315,7 +3326,8 @@
+  *	action is set to %IEEE80211_AMPDU_RX_START or
+  *	%IEEE80211_AMPDU_TX_OPERATIONAL
+  * @amsdu: indicates the peer's ability to receive A-MSDU within A-MPDU.
+- *	valid when the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL
++ *	valid when the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL 
++ * @ndp: indicates the driver has requested the session to use NDP block ACKs
+  * @timeout: BA session timeout. Valid only when the action is set to
+  *	%IEEE80211_AMPDU_RX_START
+  */
+@@ -3326,6 +3338,7 @@
+ 	u16 ssn;
+ 	u16 buf_size;
+ 	bool amsdu;
++       bool ndp;
+ 	u16 timeout;
+ };
+ 
+
+--- a/net/mac80211/agg-rx.c
++++ b/net/mac80211/agg-rx.c
+@@ -80,6 +80,8 @@
+ 	RCU_INIT_POINTER(sta->ampdu_mlme.tid_rx[tid], NULL);
+ 	__clear_bit(tid, sta->ampdu_mlme.agg_session_valid);
+ 
++       if (tid_rx) params.ndp = tid_rx->ndp;
++
+ 	ht_dbg(sta->sdata,
+ 	       "Rx BA session stop requested for %pM tid %u %s reason: %d\n",
+ 	       sta->sta.addr, tid,
+@@ -94,7 +96,7 @@
+ 	/* check if this is a self generated aggregation halt */
+ 	if (initiator == WLAN_BACK_RECIPIENT && tx)
+ 		ieee80211_send_delba(sta->sdata, sta->sta.addr,
+-				     tid, WLAN_BACK_RECIPIENT, reason);
++				     tid, params.ndp, WLAN_BACK_RECIPIENT, reason);
+ 
+ 	/*
+ 	 * return here in case tid_rx is not assigned - which will happen if
+@@ -214,7 +216,7 @@
+ 
+ static void ieee80211_send_addba_resp(struct sta_info *sta, u8 *da, u16 tid,
+ 				      u8 dialog_token, u16 status, u16 policy,
+-				      u16 buf_size, u16 timeout,
++				      u16 buf_size, u16 timeout, bool ndp,
+ 				      const struct ieee80211_addba_ext_ie *addbaext)
+ {
+ 	struct ieee80211_sub_if_data *sdata = sta->sdata;
+@@ -248,7 +250,8 @@
+ 
+ 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp));
+ 	mgmt->u.action.category = WLAN_CATEGORY_BACK;
+-	mgmt->u.action.u.addba_resp.action_code = WLAN_ACTION_ADDBA_RESP;
++	mgmt->u.action.u.addba_resp.action_code = ndp ?
++                       WLAN_ACTION_NDP_ADDBA_RESP : WLAN_ACTION_ADDBA_RESP;
+ 	mgmt->u.action.u.addba_resp.dialog_token = dialog_token;
+ 
+ 	capab = 0;
+@@ -273,7 +276,7 @@
+ void ___ieee80211_start_rx_ba_session(struct sta_info *sta,
+ 				      u8 dialog_token, u16 timeout,
+ 				      u16 start_seq_num, u16 ba_policy, u16 tid,
+-				      u16 buf_size, bool tx, bool auto_seq,
++				      u16 buf_size, bool tx, bool auto_seq, bool ndp,
+ 				      const struct ieee80211_addba_ext_ie *addbaext)
+ {
+ 	struct ieee80211_local *local = sta->sdata->local;
+@@ -284,6 +287,7 @@
+ 		.tid = tid,
+ 		.amsdu = false,
+ 		.timeout = timeout,
++		.ndp = ndp,
+ 		.ssn = start_seq_num,
+ 	};
+ 	int i, ret = -EOPNOTSUPP;
+@@ -306,6 +310,12 @@
+ 		goto end;
+ 	}
+ 
++    
++       if (ndp && !ieee80211_hw_check(&local->hw, SUPPORTS_NDP_BLOCKACK)) {
++       	ht_dbg(sta->sdata, "Requested NDP BA but HW does not support it\n");
++       	goto end;
++       }
++
+ 	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
+ 		ht_dbg(sta->sdata,
+ 		       "Suspend in progress - Denying ADDBA request (%pM tid %d)\n",
+@@ -438,6 +448,7 @@
+ 	tid_agg_rx->started = false;
+ 	tid_agg_rx->reorder_buf_filtered = 0;
+ 	tid_agg_rx->tid = tid;
++       tid_agg_rx->ndp = params.ndp;
+ 	tid_agg_rx->sta = sta;
+ 	status = WLAN_STATUS_SUCCESS;
+ 
+@@ -459,20 +470,20 @@
+ 	if (tx)
+ 		ieee80211_send_addba_resp(sta, sta->sta.addr, tid,
+ 					  dialog_token, status, 1, buf_size,
+-					  timeout, addbaext);
++					  timeout, params.ndp, addbaext);
+ }
+ 
+ static void __ieee80211_start_rx_ba_session(struct sta_info *sta,
+ 					    u8 dialog_token, u16 timeout,
+ 					    u16 start_seq_num, u16 ba_policy,
+ 					    u16 tid, u16 buf_size, bool tx,
+-					    bool auto_seq,
++					    bool auto_seq, bool ndp,
+ 					    const struct ieee80211_addba_ext_ie *addbaext)
+ {
+ 	mutex_lock(&sta->ampdu_mlme.mtx);
+ 	___ieee80211_start_rx_ba_session(sta, dialog_token, timeout,
+ 					 start_seq_num, ba_policy, tid,
+-					 buf_size, tx, auto_seq, addbaext);
++					 buf_size, tx, auto_seq, ndp, addbaext);
+ 	mutex_unlock(&sta->ampdu_mlme.mtx);
+ }
+ 
+@@ -485,6 +496,7 @@
+ 	struct ieee802_11_elems *elems = NULL;
+ 	u8 dialog_token;
+ 	int ies_len;
++       bool ndp_ba;
+ 
+ 	/* extract session parameters from addba request frame */
+ 	dialog_token = mgmt->u.action.u.addba_req.dialog_token;
+@@ -496,6 +508,7 @@
+ 	ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
+ 	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
+ 	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
++       ndp_ba = (mgmt->u.action.u.addba_req.action_code == WLAN_ACTION_NDP_ADDBA_REQ);
+ 
+ 	ies_len = len - offsetof(struct ieee80211_mgmt,
+ 				 u.action.u.addba_req.variable);
+@@ -508,7 +521,7 @@
+ 
+ 	__ieee80211_start_rx_ba_session(sta, dialog_token, timeout,
+ 					start_seq_num, ba_policy, tid,
+-					buf_size, true, false,
++					buf_size, true, false, ndp_ba,
+ 					elems ? elems->addba_ext_ie : NULL);
+ free:
+ 	kfree(elems);
+	
+--- a/net/mac80211/agg-tx.c
++++ b/net/mac80211/agg-tx.c
+@@ -65,7 +65,7 @@
+  */
+ 
+ static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
+-					 const u8 *da, u16 tid,
++					 const u8 *da, u16 tid, bool ndp,
+ 					 u8 dialog_token, u16 start_seq_num,
+ 					 u16 agg_size, u16 timeout)
+ {
+@@ -99,7 +99,8 @@
+ 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
+ 
+ 	mgmt->u.action.category = WLAN_CATEGORY_BACK;
+-	mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
++	mgmt->u.action.u.addba_req.action_code = ndp ? WLAN_ACTION_NDP_ADDBA_REQ :
++                       WLAN_ACTION_ADDBA_REQ;
+ 
+ 	mgmt->u.action.u.addba_req.dialog_token = dialog_token;
+ 	if (amsdu)
+@@ -488,7 +489,7 @@
+ 	}
+ 
+ 	/* send AddBA request */
+-	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
++	ieee80211_send_addba_request(sdata, sta->sta.addr, tid, tid_tx->ndp,
+ 				     tid_tx->dialog_token, tid_tx->ssn,
+ 				     buf_size, tid_tx->timeout);
+ 
+@@ -506,10 +507,18 @@
+ 		.tid = tid,
+ 		.buf_size = 0,
+ 		.amsdu = false,
++		.ndp = false,
+ 		.timeout = 0,
+ 	};
+ 	int ret;
+ 
++      /* If the HW supports NDP blockacks, try to negotiate. It's the drivers responsibility to
++       * clear .ndp if the conditions for NDP block acks are not met for this TID.
++       * TODO: remove driver responsibility when S1G STA caps exist in mac80211
++       */
++       if (ieee80211_hw_check(&local->hw, SUPPORTS_NDP_BLOCKACK))
++       	params.ndp = true;
++
+ 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+ 
+ 	/*
+@@ -532,6 +541,11 @@
+ 	params.ssn = sta->tid_seq[tid] >> 4;
+ 	ret = drv_ampdu_action(local, sdata, &params);
+ 	tid_tx->ssn = params.ssn;
++
++    
++       /* driver may clear this flag if it does not want NDP for this session */
++       tid_tx->ndp = params.ndp;
++      
+ 	if (ret == IEEE80211_AMPDU_TX_START_DELAY_ADDBA) {
+ 		return;
+ 	} else if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
+@@ -769,6 +783,7 @@
+ 	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+ 	params.buf_size = tid_tx->buf_size;
+ 	params.amsdu = tid_tx->amsdu;
++	params.ndp = tid_tx->ndp;
+ 
+ 	ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
+ 	       sta->sta.addr, tid);
+@@ -950,7 +965,7 @@
+ 		ieee80211_agg_start_txq(sta, tid, false);
+ 
+ 	if (send_delba)
+-		ieee80211_send_delba(sdata, sta->sta.addr, tid,
++		ieee80211_send_delba(sdata, sta->sta.addr, tid, tid_tx->ndp,
+ 			WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
+ }
+ 
+@@ -1009,6 +1024,13 @@
+ 		goto out;
+ 	}
+ 
++       if ((tid_tx->ndp && mgmt->u.action.u.addba_resp.action_code != WLAN_ACTION_NDP_ADDBA_RESP) ||
++           (!tid_tx->ndp && mgmt->u.action.u.addba_resp.action_code != WLAN_ACTION_ADDBA_RESP)) {
++            ht_dbg(sta->sdata, "wrong addBA response action code, %d ndp %d\n",
++                               mgmt->u.action.u.addba_resp.action_code, tid_tx->ndp);
++           goto out;
++       }
++
+ 	del_timer_sync(&tid_tx->addba_resp_timer);
+ 
+ 	ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
+--- a/net/mac80211/debugfs.c
++++ b/net/mac80211/debugfs.c
+@@ -543,6 +543,7 @@
+ 	FLAG(SUPPORTS_RX_DECAP_OFFLOAD),
+ 	FLAG(SUPPORTS_CONC_MON_RX_DECAP),
+ 	FLAG(DETECTS_COLOR_COLLISION),
++	FLAG(SUPPORTS_NDP_BLOCKACK),
+ #undef FLAG
+ };
+ 
+--- a/net/mac80211/ht.c
++++ b/net/mac80211/ht.c
+@@ -365,7 +365,7 @@
+ 				       sta->ampdu_mlme.tid_rx_manage_offl))
+ 			___ieee80211_start_rx_ba_session(sta, 0, 0, 0, 1, tid,
+ 							 IEEE80211_MAX_AMPDU_BUF_HT,
+-							 false, true, NULL);
++							 false, true, false, NULL);
+ 
+ 		if (test_and_clear_bit(tid + IEEE80211_NUM_TIDS,
+ 				       sta->ampdu_mlme.tid_rx_manage_offl))
+@@ -412,7 +412,7 @@
+ }
+ 
+ void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
+-			  const u8 *da, u16 tid,
++			  const u8 *da, u16 tid, bool ndp,
+ 			  u16 initiator, u16 reason_code)
+ {
+ 	struct ieee80211_local *local = sdata->local;
+@@ -443,7 +443,7 @@
+ 	skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
+ 
+ 	mgmt->u.action.category = WLAN_CATEGORY_BACK;
+-	mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
++	mgmt->u.action.u.delba.action_code = ndp ? WLAN_ACTION_NDP_DELBA : WLAN_ACTION_DELBA;
+ 	params = (u16)(initiator << 11); 	/* bit 11 initiator */
+ 	params |= (u16)(tid << 12); 		/* bit 15:12 TID number */
+ 
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -1902,7 +1902,7 @@
+ 				       const struct ieee80211_ht_cap *ht_cap_ie,
+ 				       struct sta_info *sta);
+ void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
+-			  const u8 *da, u16 tid,
++			  const u8 *da, u16 tid, bool ndp,
+ 			  u16 initiator, u16 reason_code);
+ int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
+ 			       enum ieee80211_smps_mode smps, const u8 *da,
+@@ -1919,7 +1919,7 @@
+ void ___ieee80211_start_rx_ba_session(struct sta_info *sta,
+ 				      u8 dialog_token, u16 timeout,
+ 				      u16 start_seq_num, u16 ba_policy, u16 tid,
+-				      u16 buf_size, bool tx, bool auto_seq,
++				      u16 buf_size, bool tx, bool auto_seq, bool ndp,
+ 				      const struct ieee80211_addba_ext_ie *addbaext);
+ void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta,
+ 					 enum ieee80211_agg_stop_reason reason);
+--- a/net/mac80211/iface.c
++++ b/net/mac80211/iface.c
+@@ -1551,14 +1551,17 @@
+ 		if (sta) {
+ 			switch (mgmt->u.action.u.addba_req.action_code) {
+ 			case WLAN_ACTION_ADDBA_REQ:
++			case WLAN_ACTION_NDP_ADDBA_REQ:
+ 				ieee80211_process_addba_request(local, sta,
+ 								mgmt, len);
+ 				break;
+ 			case WLAN_ACTION_ADDBA_RESP:
++			case WLAN_ACTION_NDP_ADDBA_RESP:
+ 				ieee80211_process_addba_resp(local, sta,
+ 							     mgmt, len);
+ 				break;
+ 			case WLAN_ACTION_DELBA:
++			case WLAN_ACTION_NDP_DELBA:
+ 				ieee80211_process_delba(sdata, sta,
+ 							mgmt, len);
+ 				break;
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -1389,7 +1389,7 @@
+ 		if (ack_policy == IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK &&
+ 		    !test_bit(tid, rx->sta->ampdu_mlme.agg_session_valid) &&
+ 		    !test_and_set_bit(tid, rx->sta->ampdu_mlme.unexpected_agg))
+-			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid,
++			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid, false,
+ 					     WLAN_BACK_RECIPIENT,
+ 					     WLAN_REASON_QSTA_REQUIRE_SETUP);
+ 		goto dont_reorder;
+@@ -3101,7 +3101,7 @@
+ 
+ 		if (!test_bit(tid, rx->sta->ampdu_mlme.agg_session_valid) &&
+ 		    !test_and_set_bit(tid, rx->sta->ampdu_mlme.unexpected_agg))
+-			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid,
++			ieee80211_send_delba(rx->sdata, rx->sta->sta.addr, tid, false,
+ 					     WLAN_BACK_RECIPIENT,
+ 					     WLAN_REASON_QSTA_REQUIRE_SETUP);
+ 
+@@ -3526,16 +3526,19 @@
+ 
+ 		switch (mgmt->u.action.u.addba_req.action_code) {
+ 		case WLAN_ACTION_ADDBA_REQ:
++		case WLAN_ACTION_NDP_ADDBA_REQ:
+ 			if (len < (IEEE80211_MIN_ACTION_SIZE +
+ 				   sizeof(mgmt->u.action.u.addba_req)))
+ 				goto invalid;
+ 			break;
+ 		case WLAN_ACTION_ADDBA_RESP:
++		case WLAN_ACTION_NDP_ADDBA_RESP:
+ 			if (len < (IEEE80211_MIN_ACTION_SIZE +
+ 				   sizeof(mgmt->u.action.u.addba_resp)))
+ 				goto invalid;
+ 			break;
+ 		case WLAN_ACTION_DELBA:
++		case WLAN_ACTION_NDP_DELBA:
+ 			if (len < (IEEE80211_MIN_ACTION_SIZE +
+ 				   sizeof(mgmt->u.action.u.delba)))
+ 				goto invalid;
+--- a/net/mac80211/sta_info.h
++++ b/net/mac80211/sta_info.h
+@@ -170,6 +170,7 @@
+  * @failed_bar_ssn: ssn of the last failed BAR tx attempt
+  * @bar_pending: BAR needs to be re-sent
+  * @amsdu: support A-MSDU withing A-MDPU
++ * @ndp: this session is using NDP block ACKs
+  *
+  * This structure's lifetime is managed by RCU, assignments to
+  * the array holding it must hold the aggregation mutex.
+@@ -198,6 +199,7 @@
+ 	u16 failed_bar_ssn;
+ 	bool bar_pending;
+ 	bool amsdu;
++	bool ndp;
+ 	u8 tid;
+ };
+ 
+@@ -225,6 +227,7 @@
+  *	and ssn.
+  * @removed: this session is removed (but might have been found due to RCU)
+  * @started: this session has started (head ssn or higher was received)
++ * @ndp: this session is using NDP block ACKs
+  *
+  * This structure's lifetime is managed by RCU, assignments to
+  * the array holding it must hold the aggregation mutex.
+@@ -252,7 +255,8 @@
+ 	u8 tid;
+ 	u8 auto_seq:1,
+ 	   removed:1,
+-	   started:1;
++	   started:1,
++	   ndp:1;
+ };
+ 
+ /**

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap111.dts

@@ -169,7 +169,8 @@
 		compatible = "mediatek,eth-mac";
 		reg = <0>;
 		phy-mode = "sgmii";
-		phy-handle = <&phy1>;      // add phy handler
+		phy-handle = <&phy30>;
+		phy-handle2 = <&phy1>;
 		mtd-mac-address = <&factory 0x24>;
 	};
 
@@ -181,9 +182,9 @@
 		mtd-mac-address = <&factory 0x2a>;
 	};
 
-        mdio: mdio-bus {
-                #address-cells = <1>;
-                #size-cells = <0>;
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		phy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-id03a2.9461";
@@ -193,6 +194,16 @@
 			nvmem-cell-names = "phy-cal-data";
 		};
 
+		phy30: ethernet-phy@30 { // AN8801SB
+			compatible = "ethernet-phy-idc0ff.0421";
+			reg = <30>; //0x1e
+			phy-mode = "sgmii";
+			full-duplex;
+			pause;
+			airoha,surge = <1>;
+			airoha,polarity = <2>;
+		};
+
 		phy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-id03a2.9471";
 			reg = <24>;            // set phy address to 0x18
@@ -200,9 +211,8 @@
 			reset-assert-us = <600>;
 			reset-deassert-us = <20000>;
 			phy-mode = "sgmii";
-    };
-
-        };
+		};
+	};
 };
 
 &hnat {

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-edgecore-eap112.dts

@@ -255,18 +255,21 @@
 &spi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi2_pins>;
+        address-cells = <1>;
+        size-cells = <0>;
 	status = "okay";
 
-	slb9670: slb9670@0 {
-		compatible = "infineon,slb9670";
-		reg = <0>; /* CE0 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		spi-cal-enable;
-		spi-cal-mode = "read-data";
-		spi-cal-datalen = <2>;
-		spi-cal-data = /bits/ 8 <0x00 0x1b>;
-		spi-max-frequency = <40000000>;
+
+        mm6108: mm6108@0 {
+                compatible = "morse,mm610x-spi";
+                reg = <0>;
+                reset-gpios = <&pio 31 0>;
+                power-gpios = <&pio 5 0>,<&pio 0 0>;
+                spi-irq-gpios = <&pio 30 0>;
+                status = "okay";
+                spi-max-frequency = <52000000>;
+                spi-tx-bus-width = <1>;
+                spi-rx-bus-width = <1>;
 	};
 };
 
@@ -338,6 +341,18 @@
 			function = "spi";
 			groups = "spi2";
 		};
+
+                conf-pu {
+                        pins = "SPI2_CS";
+                        drive-strength = <8>;
+                        mediatek,pull-up-adv = <3>;
+                };
+
+                conf-pd {
+                        pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+                        drive-strength = <8>;
+                        mediatek,pull-down-adv = <3>;
+                };
 	};
 
 	uart1_pins: uart1-pins-g1 {

feeds/mediatek-sdk/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7981-emplus-wap588m.dts

@@ -0,0 +1,349 @@
+/dts-v1/;
+#include "mt7981.dtsi"
+/ {
+	model = "Emplus WAP588M";
+	compatible = "emplus,wap588m";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x10000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+				};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+
+		};
+		wifi2g {
+			label = "wifi2g";
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ra0";
+		};
+		wifi5g {
+			label = "wifi5g";
+			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "rax0";
+		};
+		lan {
+			label = "lan";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "eth0";
+		};
+		wan {
+			label = "wan";
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "eth1";
+		};
+	};
+
+	nmbm_spim_nand {
+		compatible = "generic,nmbm";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		lower-mtd-device = <&spi_nand>;
+		forced-create;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "BL2";
+				reg = <0x00000 0x0100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x0100000 0x0080000>;
+			};
+
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x0200000>;
+			};
+
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x0200000>;
+			};
+
+			partition@580000 {
+				label = "ubi"; //110MB
+				reg = <0x580000 0x3700000>;
+			};
+
+			partition@3C80000 {
+				label = "ubi_1"; //110MB
+				reg = <0x3C80000 0x3700000>;
+			};
+
+			partition@7380000 {
+				label = "cert"; //384KB
+				reg = <0x7380000 0x0060000>;
+			};
+
+			partition@73E0000 {
+				label = "userconfig"; //640KB
+				reg = <0x73E0000 0x00a0000>;
+			};
+
+			partition@7480000 {
+				label = "crashdump"; //384KB
+				reg = <0x7480000 0x0060000>;
+			};
+		};
+	};
+
+	sound_wm8960 {
+		compatible = "mediatek,mt79xx-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing = "Headphone", "HP_L",
+				"Headphone", "HP_R",
+				"LINPUT1", "AMIC",
+				"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		status = "disabled";
+	};
+
+	sound_si3218x {
+		compatible = "mediatek,mt79xx-si3218x-machine";
+		mediatek,platform = <&afe>;
+		mediatek,ext-codec = <&proslic_spi>;
+		status = "disabled";
+	};
+};
+
+&afe {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcm_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "disabled";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&eth {
+        status = "okay";
+
+        gmac0: mac@0 {
+                compatible = "mediatek,eth-mac";
+                reg = <0>;
+                phy-mode = "sgmii";
+                phy-handle = <&phy1>;
+        };
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&phy0>;
+	};
+
+        mdio: mdio-bus {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+		// MT7981 internal PHY
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id03a2.9461";
+			reg = <0>;
+			phy-mode = "gmii";
+			nvmem-cells = <&phy_calibration>;
+			nvmem-cell-names = "phy-cal-data";
+		};
+
+
+		// RTL8211FS PHY
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <120000>;
+			reset-deassert-us = <120000>;
+			phy-mode = "sgmii";
+		};
+    };
+};
+
+&hnat {
+	mtketh-wan = "eth1";
+	mtketh-lan = "eth0";
+	mtketh-max-gmac = <2>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+
+	proslic_spi: proslic_spi@0 {
+		compatible = "silabs,proslic_spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-cpha = <1>;
+		spi-cpol = <1>;
+		channel_count = <1>;
+		debug_level = <4>;       /* 1 = TRC, 2 = DBG, 4 = ERR */
+		reset_gpio = <&pio 15 0>;
+		ig,enable-spi = <1>;     /* 1: Enable, 0: Disable */
+	};
+};
+
+&wbsys {
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+	status = "okay";
+	pinctrl-names = "dbdc";
+	pinctrl-0 = <&wf_dbdc_pins>;
+};
+
+&pio {
+
+	i2c_pins: i2c-pins-g0 {
+                mux {
+                        function = "i2c";
+                        groups = "i2c0_0";
+                };
+        };
+
+        pcm_pins: pcm-pins-g0 {
+                mux {
+                        function = "pcm";
+                        groups = "pcm";
+                };
+        };
+
+        pwm0_pin: pwm0-pin-g0 {
+                mux {
+                        function = "pwm";
+                        groups = "pwm0_0";
+                };
+        };
+
+        pwm1_pin: pwm1-pin-g0 {
+                mux {
+                        function = "pwm";
+                        groups = "pwm1_0";
+                };
+        };
+
+        pwm2_pin: pwm2-pin {
+                mux {
+                        function = "pwm";
+                        groups = "pwm2";
+                };
+        };
+
+	spi0_flash_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	spic_pins: spi1-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_1";
+		};
+	};
+
+	uart1_pins: uart1-pins-g1 {
+                mux {
+                        function = "uart";
+                        groups = "uart1_1";
+                };
+        };
+
+	uart2_pins: uart2-pins-g1 {
+		mux {
+                        function = "uart";
+                        groups = "uart2_1";
+                };
+        };
+	wf_dbdc_pins: wf_dbdc-pins {
+		mux {
+			function = "eth";
+			groups = "wf0_mode1";
+		};
+		conf {
+			pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
+			       "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
+			       "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
+			       "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
+			       "WF_CBA_RESETB", "WF_DIG_RESETB";
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+	};
+};
+
+&xhci {
+	mediatek,u3p-dis-msk = <0x0>;
+	phys = <&u2port0 PHY_TYPE_USB2>,
+	       <&u3port0 PHY_TYPE_USB3>;
+	status = "disabled";
+};

feeds/mediatek-sdk/mediatek/files-5.4/drivers/net/phy/an8801.c

@@ -113,7 +113,6 @@ static const struct AIR_LED_CFG_T led_cfg_dlt[MAX_LED_SIZE] = {
 	/* LED2 */
 	{LED_ENABLE, AIR_LED_GPIO9, AIR_ACTIVE_LOW,  AIR_LED2_ON, AIR_LED2_BLK},
 };
-
 static const u16 led_blink_cfg_dlt = AIR_LED_BLK_DUR_64M;
 /* RGMII delay */
 static const u8 rxdelay_force = FALSE;
@@ -140,7 +139,6 @@ static int __air_buckpbus_reg_write(struct phy_device *phydev, u32 addr,
 	err |= mbus->write(mbus, phy_addr, 0x13, (u16)(data >> 16));
 	err |= mbus->write(mbus, phy_addr, 0x14, (u16)(data & 0xffff));
 	err |= mbus->write(mbus, phy_addr, 0x1F, 0);
-
 	return err;
 }
 
@@ -167,6 +165,41 @@ static u32 __air_buckpbus_reg_read(struct phy_device *phydev, u32 addr)
 	return data;
 }
 
+static u32 __air_buckpbus_reg_modify(struct phy_device *phydev, u32 addr,
+					u32 mask, u32 set)
+{
+	int err = 0;
+	u32 data_h, data_l, data_old, data_new;
+	int phy_addr = phydev_phy_addr(phydev);
+	struct mii_bus *mbus = phydev_mdiobus(phydev);
+
+	err = mbus->write(mbus, phy_addr, 0x1F, 4);
+	err |= mbus->write(mbus, phy_addr, 0x10, 0);
+	err |= mbus->write(mbus, phy_addr, 0x15, (u16)(addr >> 16));
+	err |= mbus->write(mbus, phy_addr, 0x16, (u16)(addr & 0xffff));
+	data_h = mbus->read(mbus, phy_addr, 0x17);
+	data_l = mbus->read(mbus, phy_addr, 0x18);
+	if (err < 0) {
+		mbus->write(mbus, phy_addr, 0x1F, 0);
+		return INVALID_DATA;
+	}
+
+	data_old = ((data_h & 0xffff) << 16) | (data_l & 0xffff);
+	data_new = (data_old & ~mask) | set;
+	if (data_new == data_old) {
+		mbus->write(mbus, phy_addr, 0x1F, 0);
+		return 0;
+	}
+
+	err |= mbus->write(mbus, phy_addr, 0x11, (u16)(addr >> 16));
+	err |= mbus->write(mbus, phy_addr, 0x12, (u16)(addr & 0xffff));
+	err |= mbus->write(mbus, phy_addr, 0x13, (u16)(data_new >> 16));
+	err |= mbus->write(mbus, phy_addr, 0x14, (u16)(data_new & 0xffff));
+	err |= mbus->write(mbus, phy_addr, 0x1F, 0);
+
+	return err;
+}
+
 static int air_buckpbus_reg_write(struct phy_device *phydev, u32 addr, u32 data)
 {
 	int err = 0;
@@ -189,82 +222,18 @@ static u32 air_buckpbus_reg_read(struct phy_device *phydev, u32 addr)
 	return data;
 }
 
-static int __an8801_cl45_write(struct phy_device *phydev, int devad, u16 reg,
-				u16 val)
-{
-	u32 addr = (AN8801_EPHY_ADDR | AN8801_CL22 | (devad << 18) |
-				(reg << 2));
-
-	return __air_buckpbus_reg_write(phydev, addr, val);
-}
-
-static int __an8801_cl45_read(struct phy_device *phydev, int devad, u16 reg)
-{
-	u32 addr = (AN8801_EPHY_ADDR | AN8801_CL22 | (devad << 18) |
-				(reg << 2));
-
-	return __air_buckpbus_reg_read(phydev, addr);
-}
-
-int __an8801_modify_cl45_changed(struct phy_device *phydev, int devad, u32 regnum,
-				u16 mask, u16 set)
-{
-	int new, ret;
-
-	ret = __an8801_cl45_read(phydev, devad, regnum);
-	if (ret < 0)
-		return ret;
-
-	new = (ret & ~mask) | set;
-	if (new == ret)
-		return 0;
-
-	ret = __an8801_cl45_write(phydev, devad, regnum, new);
-
-	return ret < 0 ? ret : 1;
-}
-
-static int an8801_modify_cl45_changed(struct phy_device *phydev, int devad,
-				u32 regnum, u16 mask, u16 set)
+static int air_buckpbus_reg_modify(struct phy_device *phydev, u32 addr,
+					u32 mask, u32 set)
 {
 	int err = 0;
 
 	mdiobus_lock(phydev);
-	err = __an8801_modify_cl45_changed(phydev, devad, regnum, mask, set);
+	err = __air_buckpbus_reg_modify(phydev, addr, mask, set);
 	mdiobus_unlock(phydev);
 
 	return err;
 }
 
-static int an8801_cl45_write(struct phy_device *phydev, int devad, u16 reg,
-			      u16 val)
-{
-	int err = 0;
-
-	mdiobus_lock(phydev);
-	err = __an8801_cl45_write(phydev, devad, reg, val);
-	mdiobus_unlock(phydev);
-
-	return err;
-}
-
-static int an8801_cl45_read(struct phy_device *phydev, int devad, u16 reg,
-			     u16 *read_data)
-{
-	int data = 0;
-
-	mdiobus_lock(phydev);
-	data = __an8801_cl45_read(phydev, devad, reg);
-	mdiobus_unlock(phydev);
-
-	if (data == INVALID_DATA)
-		return -EINVAL;
-
-	*read_data = data;
-
-	return 0;
-}
-
 static int air_sw_reset(struct phy_device *phydev)
 {
 	u32 reg_value;
@@ -298,50 +267,36 @@ static int an8801_led_set_usr_def(struct phy_device *phydev, u8 entity,
 
 	on_evt |= LED_ON_EN;
 
-	err = an8801_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), on_evt);
+	err = phy_write_mmd(phydev, 0x1f, LED_ON_CTRL(entity), on_evt);
 	if (err)
 		return -1;
 
-	return an8801_cl45_write(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt);
+	return phy_write_mmd(phydev, 0x1f, LED_BLK_CTRL(entity), blk_evt);
 }
 
 static int an8801_led_set_mode(struct phy_device *phydev, u8 mode)
 {
-	int err;
-	u16 data;
-
-	err = an8801_cl45_read(phydev, 0x1f, LED_BCR, &data);
-	if (err)
-		return -1;
-
 	switch (mode) {
 	case AIR_LED_MODE_DISABLE:
-		data &= ~LED_BCR_EXT_CTRL;
-		data &= ~LED_BCR_MODE_MASK;
-		data |= LED_BCR_MODE_DISABLE;
-		break;
+		return phy_modify_mmd(phydev, 0x1f, LED_BCR,
+						(LED_BCR_EXT_CTRL | LED_BCR_CLK_EN),
+						0x0);
 	case AIR_LED_MODE_USER_DEFINE:
-		data |= (LED_BCR_EXT_CTRL | LED_BCR_CLK_EN);
+		return phy_modify_mmd(phydev, 0x1f, LED_BCR,
+						(LED_BCR_EXT_CTRL | LED_BCR_CLK_EN),
+						(LED_BCR_EXT_CTRL | LED_BCR_CLK_EN));
+	default:
 		break;
 	}
-	return an8801_cl45_write(phydev, 0x1f, LED_BCR, data);
+	dev_err(phydev_dev(phydev),
+				"LED mode %d is not supported\n", mode);
+	return -EINVAL;
 }
 
 static int an8801_led_set_state(struct phy_device *phydev, u8 entity, u8 state)
 {
-	u16 data;
-	int err;
-
-	err = an8801_cl45_read(phydev, 0x1f, LED_ON_CTRL(entity), &data);
-	if (err)
-		return err;
-
-	if (state)
-		data |= LED_ON_EN;
-	else
-		data &= ~LED_ON_EN;
-
-	return an8801_cl45_write(phydev, 0x1f, LED_ON_CTRL(entity), data);
+	return phy_modify_mmd(phydev, 0x1f, LED_ON_CTRL(entity), LED_ON_EN,
+					(state) ? LED_ON_EN : 0x0);
 }
 
 static int an8801_led_init(struct phy_device *phydev)
@@ -352,12 +307,12 @@ static int an8801_led_init(struct phy_device *phydev)
 	u32 data;
 	u16 led_blink_cfg = priv->led_blink_cfg;
 
-	ret = an8801_cl45_write(phydev, 0x1f, LED_BLK_DUR,
+	ret = phy_write_mmd(phydev, 0x1f, LED_BLK_DUR,
 				 LED_BLINK_DURATION(led_blink_cfg));
 	if (ret < 0)
 		return ret;
 
-	ret = an8801_cl45_write(phydev, 0x1f, LED_ON_DUR,
+	ret = phy_write_mmd(phydev, 0x1f, LED_ON_DUR,
 				 (LED_BLINK_DURATION(led_blink_cfg) >> 1));
 	if (ret < 0)
 		return ret;
@@ -406,6 +361,56 @@ static int an8801_led_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int an8801_ack_interrupt(struct phy_device *phydev)
+{
+	u32 reg_val = 0;
+
+	air_buckpbus_reg_write(phydev, 0x10285404, 0x102);
+	reg_val = air_buckpbus_reg_read(phydev, 0x10285400);
+	air_buckpbus_reg_write(phydev, 0x10285400, 0x0);
+	air_buckpbus_reg_write(phydev, 0x10285400, reg_val | 0x10);
+	air_buckpbus_reg_write(phydev, 0x10285404, 0x12);
+	air_buckpbus_reg_write(phydev, 0x10285704, 0x1f);
+	return 0;
+}
+
+static int an8801_config_intr(struct phy_device *phydev)
+{
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		air_buckpbus_reg_write(phydev, 0x1000007c, BIT(AIR_INTERRUPT_GPIO) << 16);
+		air_buckpbus_reg_modify(phydev, 0x10285700, 0x1, 0x1);
+	} else {
+		air_buckpbus_reg_write(phydev, 0x1000007c, 0x0);
+		air_buckpbus_reg_modify(phydev, 0x10285700, 0x1, 0x0);
+	}
+	an8801_ack_interrupt(phydev);
+	return 0;
+}
+
+static int an8801_did_interrupt(struct phy_device *phydev)
+{
+	u32 reg_val = 0;
+
+	reg_val = air_buckpbus_reg_read(phydev, 0x10285704);
+
+	if (reg_val & 0x11)
+		return 1;
+
+	return 0;
+}
+
+#if (KERNEL_VERSION(5, 11, 0) < LINUX_VERSION_CODE)
+static irqreturn_t an8801_handle_interrupt(struct phy_device *phydev)
+{
+	if (!an8801_did_interrupt(phydev))
+		return IRQ_NONE;
+
+	an8801_ack_interrupt(phydev);
+	phy_trigger_machine(phydev);
+	return IRQ_HANDLED;
+}
+#endif
+
 static int findClosestNumber(const u16 *arr, u16 size, u16 target)
 {
 	int left = 0, right = size - 1;
@@ -431,77 +436,77 @@ static int findClosestNumber(const u16 *arr, u16 size, u16 target)
 static int an8801sb_i2mpb_config(struct phy_device *phydev)
 {
 	int ret = 0;
-	u16 cl45_value = 0, temp_cl45 = 0, set = 0;
+	u16 cl45_value = 0, temp_cl45 = 0;
 	u16 mask = 0;
 
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x12, &cl45_value);
+	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x12);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(15, 10)) + (6 << 10);
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x12, GENMASK(15, 10), cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x12, GENMASK(15, 10), cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x16, &temp_cl45);
+	temp_cl45 = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x16);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, temp_cl45);
 	mask = GENMASK(15, 10) | GENMASK(5, 0);
 	cl45_value = (temp_cl45 & GENMASK(15, 10)) + (9 << 10);
 	cl45_value = ((temp_cl45 & GENMASK(5, 0)) + 6) | cl45_value;
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x16, mask, cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x16, mask, cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x17, &cl45_value);
+	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x17);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(13, 8)) + (6 << 8);
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x17, GENMASK(13, 8), cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x17, GENMASK(13, 8), cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x18, &temp_cl45);
+	temp_cl45 = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x18);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, temp_cl45);
 	mask = GENMASK(13, 8) | GENMASK(5, 0);
 	cl45_value = (temp_cl45 & GENMASK(13, 8)) + (9 << 8);
 	cl45_value = ((temp_cl45 & GENMASK(5, 0)) + 6) | cl45_value;
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x18, mask, cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x18, mask, cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x19, &cl45_value);
+	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x19);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(13, 8)) + (6 << 8);
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x19, GENMASK(13, 8), cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x19, GENMASK(13, 8), cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x20, &cl45_value);
+	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x20);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(5, 0)) + 6;
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x20, GENMASK(5, 0), cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x20, GENMASK(5, 0), cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x21, &cl45_value);
+	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x21);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(13, 8)) + (6 << 8);
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x21, GENMASK(13, 8), cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x21, GENMASK(13, 8), cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_read(phydev, MMD_DEV_VSPEC1, 0x22, &cl45_value);
+	cl45_value = phy_read_mmd(phydev, MMD_DEV_VSPEC1, 0x22);
 	dev_dbg(phydev_dev(phydev), "%s:%d cl45_value 0x%x!\n", __func__, __LINE__, cl45_value);
 	cl45_value = (cl45_value & GENMASK(5, 0)) + 6;
-	ret = an8801_modify_cl45_changed(phydev, MMD_DEV_VSPEC1, 0x22, GENMASK(5, 0), cl45_value);
+	ret = phy_modify_mmd(phydev, MMD_DEV_VSPEC1, 0x22, GENMASK(5, 0), cl45_value);
 	if (ret < 0)
 		return ret;
-	ret = an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x23, 0x883);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x24, 0x883);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x25, 0x883);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x26, 0x883);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x0, 0x100);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x1, 0x1bc);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x2, 0x1d0);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x3, 0x186);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x4, 0x202);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x5, 0x20e);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x6, 0x300);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x7, 0x3c0);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x8, 0x3d0);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0x9, 0x317);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0xa, 0x206);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC1, 0xb, 0xe);
+	ret = phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x23, 0x883);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x24, 0x883);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x25, 0x883);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x26, 0x883);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x0, 0x100);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x1, 0x1bc);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x2, 0x1d0);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x3, 0x186);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x4, 0x202);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x5, 0x20e);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x6, 0x300);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x7, 0x3c0);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x8, 0x3d0);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0x9, 0x317);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0xa, 0x206);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC1, 0xb, 0xe);
 	if (ret < 0)
 		return ret;
 
@@ -510,14 +515,14 @@ static int an8801sb_i2mpb_config(struct phy_device *phydev)
 }
 
 void update_r50_value(struct phy_device *phydev,
-			u16 *cl45_value, int pos1, int pos2)
+	u16 *cl45_value, int pos1, int pos2)
 {
 	*cl45_value &= ~(0x007f << 8);
 	*cl45_value |= ((r50ohm_table[pos1]) & 0x007f) << 8;
 	*cl45_value &= ~(0x007f);
 	*cl45_value |= (r50ohm_table[pos2]) & 0x007f;
 	dev_dbg(phydev_dev(phydev), "Read: r50ohm_tx_1=%d r50ohm_tx_2=%d\n",
-			r50ohm_table[pos1], r50ohm_table[pos2]);
+		r50ohm_table[pos1], r50ohm_table[pos2]);
 }
 
 int calculate_position(int pos, int shift, int table_size)
@@ -529,7 +534,7 @@ int calculate_position(int pos, int shift, int table_size)
 }
 
 int process_r50(struct phy_device *phydev, int reg,
-			u16 *cl45_value, u16 *r50ohm_tx_a, u16 *r50ohm_tx_b)
+	u16 *cl45_value, u16 *r50ohm_tx_a, u16 *r50ohm_tx_b)
 {
 	int pos1 = findClosestNumber(r50ohm_table, r50ohm_table_size, *r50ohm_tx_a);
 	int pos2 = findClosestNumber(r50ohm_table, r50ohm_table_size, *r50ohm_tx_b);
@@ -539,7 +544,7 @@ int process_r50(struct phy_device *phydev, int reg,
 		pos2 = calculate_position(pos2, R50_SHIFT, r50ohm_table_size);
 
 		update_r50_value(phydev, cl45_value, pos1, pos2);
-		return an8801_cl45_write(phydev, 0x1e, reg, *cl45_value);
+		return phy_write_mmd(phydev, 0x1e, reg, *cl45_value);
 	}
 	return 0;
 }
@@ -558,10 +563,10 @@ static int an8801r_of_init(struct phy_device *phydev)
 			return -1;
 		}
 		if (val < AIR_RGMII_DELAY_NOSTEP ||
-		    val > AIR_RGMII_DELAY_STEP_7) {
+			val > AIR_RGMII_DELAY_STEP_7) {
 			dev_err(phydev_dev(phydev),
-				   "airoha,rxclk-delay value %u out of range.",
-				   val);
+					"airoha,rxclk-delay value %u out of range.",
+					val);
 			return -1;
 		}
 		priv->rxdelay_force = TRUE;
@@ -574,14 +579,14 @@ static int an8801r_of_init(struct phy_device *phydev)
 		if (of_property_read_u32(of_node, "airoha,txclk-delay",
 					 &val) != 0) {
 			dev_err(phydev_dev(phydev),
-				   "airoha,txclk-delay value is invalid.");
+					"airoha,txclk-delay value is invalid.");
 			return -1;
 		}
 		if (val < AIR_RGMII_DELAY_NOSTEP ||
-		    val > AIR_RGMII_DELAY_STEP_7) {
+			val > AIR_RGMII_DELAY_STEP_7) {
 			dev_err(phydev_dev(phydev),
-				   "airoha,txclk-delay value %u out of range.",
-				   val);
+					"airoha,txclk-delay value %u out of range.",
+					val);
 			return -1;
 		}
 		priv->txdelay_force = TRUE;
@@ -603,10 +608,10 @@ static int an8801sb_of_init(struct phy_device *phydev)
 			return -1;
 		}
 		if (val < AIR_POL_TX_NOR_RX_REV ||
-		    val > AIR_POL_TX_REV_RX_NOR) {
+			val > AIR_POL_TX_REV_RX_NOR) {
 			dev_err(phydev_dev(phydev),
-				   "airoha,polarity value %u out of range.",
-				   val);
+					"airoha,polarity value %u out of range.",
+					val);
 			return -1;
 		}
 		priv->pol = val;
@@ -615,15 +620,15 @@ static int an8801sb_of_init(struct phy_device *phydev)
 
 	if (of_find_property(of_node, "airoha,surge", NULL)) {
 		if (of_property_read_u32(of_node, "airoha,surge",
-					&val) != 0) {
+					 &val) != 0) {
 			dev_err(phydev_dev(phydev), "airoha,surge value is invalid.");
 			return -1;
 		}
 		if (val < AIR_SURGE_0R ||
 			val > AIR_SURGE_5R) {
 			dev_err(phydev_dev(phydev),
-				"airoha,surge value %u out of range.",
-				val);
+					"airoha,surge value %u out of range.",
+					val);
 			return -1;
 		}
 		priv->surge = val;
@@ -693,23 +698,19 @@ int an8801sb_surge_protect_cfg(struct phy_device *phydev)
 	u16 cl45_value = 0;
 
 	if (priv->surge) {
-		ret = an8801_cl45_read(phydev, 0x1e, 0x174, &cl45_value);
-		if (ret < 0)
-			return ret;
+		cl45_value = phy_read_mmd(phydev, 0x1e, 0x174);
 		r50ohm_tx_a = (cl45_value >> 8) & 0x007f;
 		r50ohm_tx_b = cl45_value & 0x007f;
 		dev_dbg(phydev_dev(phydev), "Read: (0x174) value=0x%04x r50ohm_tx_a=%d r50ohm_tx_b=%d\n",
-		cl45_value, r50ohm_tx_a, r50ohm_tx_b);
+			cl45_value, r50ohm_tx_a, r50ohm_tx_b);
 		ret = process_r50(phydev, 0x174, &cl45_value, &r50ohm_tx_a, &r50ohm_tx_b);
 		if (ret < 0)
 			return ret;
-		ret = an8801_cl45_read(phydev, 0x1e, 0x175, &cl45_value);
-		if (ret < 0)
-			return ret;
+		cl45_value = phy_read_mmd(phydev, 0x1e, 0x175);
 		r50ohm_tx_c = (cl45_value >> 8) & 0x007f;
 		r50ohm_tx_d = cl45_value & 0x007f;
 		dev_dbg(phydev_dev(phydev), "Read: (0x175) value=0x%04x r50ohm_tx_c=%d r50ohm_tx_d=%d\n",
-		cl45_value, r50ohm_tx_c, r50ohm_tx_d);
+			cl45_value, r50ohm_tx_c, r50ohm_tx_d);
 		ret = process_r50(phydev, 0x175, &cl45_value, &r50ohm_tx_c, &r50ohm_tx_d);
 		if (ret < 0)
 			return ret;
@@ -764,10 +765,10 @@ static int an8801sb_config_init(struct phy_device *phydev)
 	dev_info(phydev_dev(phydev),
 		"Tx, Rx Polarity : %08x\n", pbus_value);
 
-	ret = an8801_cl45_write(phydev, MMD_DEV_VSPEC2, 0x600, 0x1e);
-	ret |= an8801_cl45_write(phydev, MMD_DEV_VSPEC2, 0x601, 0x02);
+	ret = phy_write_mmd(phydev, MMD_DEV_VSPEC2, 0x600, 0x1e);
+	ret |= phy_write_mmd(phydev, MMD_DEV_VSPEC2, 0x601, 0x02);
 
-	ret |= an8801_cl45_write(phydev, 7, 60, 0x0);
+	ret |= phy_write_mmd(phydev, 7, 60, 0x0);
 	if (ret != 0) {
 		dev_err(phydev_dev(phydev),
 			"AN8801SB initialize fail, ret %d !\n", ret);
@@ -940,7 +941,7 @@ static ssize_t an8801_polarity_write(struct file *file, const char __user *ptr,
 }
 
 static ssize_t an8801_mdio_write(struct file *file, const char __user *ptr,
-				size_t len, loff_t *off)
+					size_t len, loff_t *off)
 {
 	struct phy_device *phydev = file->private_data;
 	char buf[64], param1[32], param2[32];
@@ -955,7 +956,7 @@ static ssize_t an8801_mdio_write(struct file *file, const char __user *ptr,
 	if (count > sizeof(buf) - 1)
 		return -EINVAL;
 	if (copy_from_user(buf, ptr, len))
-	return -EFAULT;
+		return -EFAULT;
 
 	ret = sscanf(buf, "%s %s", param1, param2);
 	if (ret < 0)
@@ -991,16 +992,16 @@ static ssize_t an8801_mdio_write(struct file *file, const char __user *ptr,
 			pr_notice("\nphy=0x%x, devad=0x%x, reg=0x%x, val=0x%x\n",
 				phydev_phy_addr(phydev), devad, reg, val);
 
-			ret = an8801_cl45_write(phydev, devad, reg, val);
+			ret = phy_write_mmd(phydev, devad, reg, val);
 			if (ret < 0)
 				return ret;
-			an8801_cl45_read(phydev, devad, reg, &reg_val);
+			reg_val = phy_read_mmd(phydev, devad, reg);
 			pr_notice("\nphy=0x%x, devad=0x%x, reg=0x%x, val=0x%x confirm..\n",
 				phydev_phy_addr(phydev), devad, reg, reg_val);
 		} else if (!strncmp("r", param2, strlen("r"))) {
 			if (sscanf(buf, "cl45 r %x %x", &devad, &reg) == -1)
 				return -EFAULT;
-			an8801_cl45_read(phydev, devad, reg, &reg_val);
+			reg_val = phy_read_mmd(phydev, devad, reg);
 			pr_notice("\nphy=0x%x, devad=0x%x, reg=0x%x, val=0x%x\n",
 				phydev_phy_addr(phydev), devad, reg, reg_val);
 		} else {
@@ -1020,7 +1021,6 @@ static int an8801_counter_show(struct seq_file *seq, void *v)
 	struct phy_device *phydev = seq->private;
 	int ret = 0;
 	u32 pkt_cnt = 0;
-	struct mii_bus *mbus = phydev_mdiobus(phydev);
 
 	seq_puts(seq, "==========AIR PHY COUNTER==========\n");
 	seq_puts(seq, "|\t<<SERDES COUNTER>>\n");
@@ -1143,8 +1143,9 @@ static ssize_t an8801_debugfs_pbus(struct file *file,
 	if (buf[0] == 'w') {
 		if (sscanf(buf, "w %x %x", &reg, &val) == -1)
 			return -EFAULT;
+
 		pr_notice("\nphy=0x%x, reg=0x%x, val=0x%x\n",
-			phydev_phy_addr(phydev), reg, val);
+				phydev_phy_addr(phydev), reg, val);
 
 		ret = air_buckpbus_reg_write(phydev, reg, val);
 		if (ret < 0)
@@ -1188,10 +1189,9 @@ int an8801_info_show(struct seq_file *seq, void *v)
 	for (reg = MII_BMCR; reg <= MII_STAT1000; reg++) {
 		if ((reg <= MII_LPA) || (reg >= MII_CTRL1000))
 			seq_printf(seq, "| RG_MII 0x%02x     : 0x%08x\n",
-			reg, phy_read(phydev, reg));
+				reg, phy_read(phydev, reg));
 	}
 	seq_puts(seq, "\n");
-
 	return 0;
 }
 
@@ -1231,10 +1231,10 @@ static const struct file_operations an8801_polarity_fops = {
 };
 
 static const struct file_operations an8801_mdio_fops = {
-   .owner = THIS_MODULE,
-   .open = simple_open,
-   .write = an8801_mdio_write,
-   .llseek = noop_llseek,
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.write = an8801_mdio_write,
+	.llseek = noop_llseek,
 };
 
 int an8801_debugfs_init(struct phy_device *phydev)
@@ -1354,13 +1354,22 @@ static int an8801sb_read_status(struct phy_device *phydev)
 	if (phydev->link == LINK_DOWN) {
 		prespeed = 0;
 		phydev->speed = 0;
-		ret |= an8801_cl45_write(
+		ret |= phy_write_mmd(
 			phydev, MMD_DEV_VSPEC2, PHY_PRE_SPEED_REG, prespeed);
+
+		mdelay(10);        /* delay 10 ms */
+		reg_value = air_buckpbus_reg_read(phydev, 0x10220010);
+		reg_value &= 0x7fff;
+		air_buckpbus_reg_write(phydev, 0x10220010, reg_value);
+
+		reg_value = air_buckpbus_reg_read(phydev, 0x10220000);
+		reg_value |= AN8801SB_SGMII_AN0_ANRESTART;
+		air_buckpbus_reg_write(phydev, 0x10220000, reg_value);
 	}
 
 	if (prespeed != phydev->speed && phydev->link == LINK_UP) {
 		prespeed = phydev->speed;
-		ret |= an8801_cl45_write(
+		ret |= phy_write_mmd(
 			phydev, MMD_DEV_VSPEC2, PHY_PRE_SPEED_REG, prespeed);
 		dev_info(phydev_dev(phydev), "AN8801SB SPEED %d\n", prespeed);
 		while (an_retry > 0) {
@@ -1374,28 +1383,19 @@ static int an8801sb_read_status(struct phy_device *phydev)
 		mdelay(10);        /* delay 10 ms */
 
 
-		if (phydev->autoneg == AUTONEG_DISABLE) {
-			dev_info(phydev_dev(phydev),
-				"AN8801SB force speed = %d\n", prespeed);
-			if (prespeed == SPEED_1000) {
-				air_buckpbus_reg_write(
-					phydev, 0x10220010, 0xd801);
-			} else if (prespeed == SPEED_100) {
-				air_buckpbus_reg_write(
-					phydev, 0x10220010, 0xd401);
-			} else {
-				air_buckpbus_reg_write(
-					phydev, 0x10220010, 0xd001);
-			}
-
-			reg_value = air_buckpbus_reg_read(
-				phydev, 0x10220000);
-			reg_value |= AN8801SB_SGMII_AN0_ANRESTART;
+		if (prespeed == SPEED_1000) {
 			air_buckpbus_reg_write(
-				phydev, 0x10220000, reg_value);
+				phydev, 0x10220010, 0xd801);
+		} else if (prespeed == SPEED_100) {
+			air_buckpbus_reg_write(
+				phydev, 0x10220010, 0xd401);
+		} else {
+			air_buckpbus_reg_write(
+				phydev, 0x10220010, 0xd001);
 		}
+
 		reg_value = air_buckpbus_reg_read(phydev, 0x10220000);
-		reg_value |= AN8801SB_SGMII_AN0_RESET;
+		reg_value |= (AN8801SB_SGMII_AN0_RESET | AN8801SB_SGMII_AN0_ANRESTART);
 		air_buckpbus_reg_write(phydev, 0x10220000, reg_value);
 	}
 	return ret;
@@ -1451,9 +1451,12 @@ static struct phy_driver airoha_driver[] = {
 		.probe          = an8801_phy_probe,
 		.remove         = an8801_phy_remove,
 		.read_status    = an8801_read_status,
-#if (KERNEL_VERSION(4, 5, 0) < LINUX_VERSION_CODE)
-		.read_mmd       = __an8801_cl45_read,
-		.write_mmd      = __an8801_cl45_write,
+		.config_intr	= an8801_config_intr,
+#if (KERNEL_VERSION(5, 11, 0) < LINUX_VERSION_CODE)
+		.handle_interrupt = an8801_handle_interrupt,
+#else
+		.did_interrupt	= an8801_did_interrupt,
+		.ack_interrupt	= an8801_ack_interrupt,
 #endif
 	}
 };

feeds/mediatek-sdk/mediatek/files-5.4/drivers/net/phy/an8801.h

@@ -12,10 +12,10 @@
 
 /* NAMING DECLARATIONS
  */
-#define AN8801_DRIVER_VERSION  "1.1.4"
+#define AN8801_DRIVER_VERSION  "1.1.6"
 
 #define DEBUGFS_COUNTER         "counter"
-#define DEBUGFS_INFO     "driver_info"
+#define DEBUGFS_INFO            "driver_info"
 #define DEBUGFS_PBUS_OP         "pbus_op"
 #define DEBUGFS_POLARITY        "polarity"
 #define DEBUGFS_MDIO            "mdio"
@@ -88,7 +88,7 @@
 #define LED_BLK_EVT_1000M_RX        BIT(1)
 #define LED_BLK_EVT_1000M_TX        BIT(0)
 
-#define UNIT_LED_BLINK_DURATION     1024
+#define UNIT_LED_BLINK_DURATION     780
 
 /* Serdes auto negotation restart */
 #define AN8801SB_SGMII_AN0_ANRESTART    (0x0200)
@@ -135,6 +135,9 @@ For reference only
 #define LED_BLINK_DURATION(f)       (UNIT_LED_BLINK_DURATION << (f))
 #define LED_GPIO_SEL(led, gpio)     ((led) << ((gpio) * 3))
 
+/* Interrupt GPIO number, should not conflict with LED */
+#define AIR_INTERRUPT_GPIO	3
+
 /* DATA TYPE DECLARATIONS
  */
 enum AIR_LED_GPIO_PIN_T {

feeds/mediatek-sdk/mediatek/files-5.4/drivers/net/phy/en8801sc.c

@@ -587,7 +587,7 @@ static int en8801s_phase1_init(struct phy_device *phydev)
 
 	phydev->dev_flags = PHY_STATE_INIT;
 
-	dev_info(dev, "Phase1 initialize OK ! (%s)\n", EN8801S_DRIVER_VERSION);
+	dev_info(dev, "Phase1 initialize OK ! (%s) 10Te TP_IDL fixed.\n", EN8801S_DRIVER_VERSION);
 	if (priv->pro_version == 4) {
 		ret = en8801s_phase2_init(phydev);
 		if (ret != 0) {
@@ -811,14 +811,7 @@ static int en8801s_phase2_init(struct phy_device *phydev)
 		retry--;
 	}
 	pbus_data = airoha_pbus_read(mbus, pbus_addr, 0x1C38); /* RAW#2 */
-	ret = airoha_cl45_read(mbus, phy_addr, 0x1E, 0x12, &cl45_value);
-	if (ret < 0)
-		return ret;
-	GPHY_RG_1E_012.DATA = cl45_value;
-	GPHY_RG_1E_012.DataBitField.da_tx_i2mpb_a_tbt =
-				(u16)(pbus_data & 0x03f);
-	ret = airoha_cl45_write(mbus, phy_addr, 0x1E, 0x12,
-				GPHY_RG_1E_012.DATA);
+	ret = airoha_cl45_write(mbus, phy_addr, 0x1E, 0x12, 0xA018);
 	if (ret < 0)
 		return ret;
 	ret = airoha_cl45_read(mbus, phy_addr, 0x1E, 0x17, &cl45_value);
@@ -893,6 +886,17 @@ static int en8801s_phase2_init(struct phy_device *phydev)
 		}
 	}
 
+	//Fix 10Te TP_IDL
+	ret = airoha_cl45_read(mbus, phy_addr, 0x1E,
+				0x1A3, &cl45_value);
+	if (ret < 0)
+		return ret;
+	cl45_value &= ~0xf0;
+	ret = airoha_cl45_write(mbus, phy_addr, 0x1E,
+				0x1A3, cl45_value);
+	if (ret < 0)
+		return ret;
+
 	priv->first_init = false;
 	dev_info(phydev_dev(phydev), "Phase2 initialize OK !\n");
 	return 0;

feeds/mediatek-sdk/mediatek/image/mt7981.mk

@@ -307,3 +307,28 @@ define Device/senao_jeap6500
 endef
 TARGET_DEVICES += senao_jeap6500
 DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME
+
+define Device/emplus_wap588m
+   DEVICE_VENDOR := EMPLUS
+   DEVICE_MODEL := WAP588M
+   DEVICE_DTS := mt7981-emplus-wap588m
+   DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
+   SUPPORTED_DEVICES := emplus,wap588m
+   DEVICE_PACKAGES := kmod-mt7981-firmware kmod-mt7915e uboot-envtools -procd-ujail
+   UBINIZE_OPTS := -E 5
+   BLOCKSIZE := 128k
+   PAGESIZE := 2048
+   IMAGE_SIZE := 65536k
+   KERNEL_IN_UBI := 1
+   FIT_KEY_DIR := $(DTS_DIR)/mediatek/keys/emplus_wap588m
+   FIT_KEY_NAME := fit_key
+   IMAGES += factory.bin
+   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+   KERNEL = kernel-bin | lzma | \
+     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+   KERNEL_INITRAMFS = kernel-bin | lzma | \
+     fit-sign lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+ endef
+ TARGET_DEVICES += emplus_wap588m
+ DEFAULT_DEVICE_VARS += FIT_KEY_DIR FIT_KEY_NAME

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/board.d/02_network

@@ -31,7 +31,10 @@ mediatek_setup_interfaces()
 		;;
 	sonicfi,rap630w-211g)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
-		;;		
+		;;
+    emplus,wap588m)
+        ucidef_set_interfaces_lan_wan "eth0" "eth1"
+        ;;
 	*)	
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/init.d/bootcount

@@ -8,6 +8,9 @@ boot() {
 	edgecore,eap112)
 		bootcount=$(fw_printenv -n bootcount)
 		[ "$bootcount" != 0 ] && fw_setenv bootcount 0
+		# enable dualboot
+		avail=$(fw_printenv -n upgrade_available)
+		[ ${avail} -eq 0 ] && fw_setenv upgrade_available 1
 		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/base-files/etc/uci-defaults/30_uboot-envtools

@@ -18,6 +18,7 @@ case "$board" in
 edgecore,eap111|\
 edgecore,eap112|\
 senao,iap2300m|\
+emplus,wap588m|\
 senao,jeap6500)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x20000" "0x20000"
 	;;

feeds/mediatek-sdk/mediatek/mt7981/base-files/lib/upgrade/platform.sh

@@ -1,5 +1,17 @@
 REQUIRE_IMAGE_METADATA=1
 
+swap_wap588m_active_fw() {
+	echo "Doing swap active_fw" > /dev/console
+        tmp_active_fw=$(fw_printenv | grep active_fw | awk -F= {'print $2'})
+	if [ $tmp_active_fw == "0" ]; then
+		fw_setenv active_fw 1
+                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi_1\),56320k\(ubi\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+	else
+		fw_setenv active_fw 0
+                fw_setenv mtdparts nmbm0:1024k\(bl2\),512k\(u-boot-env\),2048k\(factory\),2048k\(fip\),56320k\(ubi\),56320k\(ubi_1\),384k\(cert\),640k\(userconfig\),384k\(crashdump\)
+	fi
+}
+
 senao_swap_active_fw() {
 	echo "Doing swap active_fw" > /dev/console
 	tmp_active_fw=$(fw_printenv -n active_fw)
@@ -47,6 +59,7 @@ platform_do_upgrade() {
 		nand_do_upgrade "$1"
 		;;
 	senao,iap2300m|\
+	emplus,wap588m|\
 	senao,jeap6500)
 		CI_UBIPART="ubi_1"
 		nand_do_upgrade "$1"
@@ -68,6 +81,7 @@ platform_check_image() {
 	edgecore,eap111|\
 	edgecore,eap112|\
 	senao,iap2300m|\
+	emplus,wap588m|\
 	senao,jeap6500)
 		nand_do_platform_check "$board" "$1"
 		return $?
@@ -92,5 +106,8 @@ platform_post_upgrade_success() {
 		senao,jeap6500)
 			senao_swap_active_fw
 		;;
+		emplus,wap588m)
+			swap_wap588m_active_fw
+		;;
 	esac
 }

feeds/mediatek-sdk/mediatek/mt7981/config-5.4

@@ -2,7 +2,6 @@ CONFIG_64BIT=y
 CONFIG_AHCI_MTK=y
 CONFIG_AIROHA_EN8801SC_PHY=y
 # CONFIG_AIROHA_EN8811H_PHY is not set
-# CONFIG_AIROHA_AN8801_PHY is not set
 CONFIG_AN8855_GSW=y
 CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y

feeds/mediatek-sdk/mediatek/patches-5.4/999-2738-an8801sb-gphy-support.patch

@@ -1,15 +1,3 @@
-From 535fdc6dfce7def996a5188819ffc96231c36f98 Mon Sep 17 00:00:00 2001
-From: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
-Date: Tue, 2 Jan 2024 18:13:43 +0800
-Subject: [PATCH] [networking][999-2738-an8801sb-gphy-support.patch]
-
----
- drivers/net/phy/Kconfig  |   5 +
- drivers/net/phy/Makefile |   1 +
- 2 files changed, 6 insertions(+)
-
-diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
-index ccd3f3f..5dbfb17 100644
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
 @@ -345,6 +345,11 @@ config SFP
@@ -24,8 +12,6 @@ index ccd3f3f..5dbfb17 100644
  config AIROHA_EN8801SC_PHY
  	tristate "Drivers for Airoha EN8801S Gigabit PHYs for MediaTek SoC."
  	---help---
-diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
-index 1e8d67b..d39e54b 100644
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
 @@ -74,6 +74,7 @@ endif
@@ -36,6 +22,64 @@ index 1e8d67b..d39e54b 100644
  obj-$(CONFIG_AIROHA_EN8801SC_PHY)	+= en8801sc.o
  air_en8811h-y := air_en8811h_main.o air_en8811h_api.o
  obj-$(CONFIG_AIROHA_EN8811H_PHY)	+= air_en8811h.o
--- 
-2.18.0
-
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -870,12 +870,17 @@
+ 	of_node_put(phy_node);
+ 
+ 	if (!phy_dev)
+-		return -ENODEV;
+-
++	{
++		phylink_info(pl, "[phylink] reload phy-handle2. %s %d\n",__func__, __LINE__);
++		phy_node = of_parse_phandle(dn, "phy-handle2", 0);
++		phy_dev = of_phy_attach(pl->netdev, phy_node, flags, pl->link_interface);
++		if (!phy_dev)
++			return -ENODEV;
++	}
++	
+ 	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+ 	if (ret)
+ 		phy_detach(phy_dev);
+-
+ 	return ret;
+ }
+ EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
+--- a/drivers/of/of_mdio.c
++++ b/drivers/of/of_mdio.c
+@@ -226,7 +226,9 @@
+ 		return rc;
+ 
+ 	/* Loop over the child nodes and register a phy_device for each phy */
++	int an8801=0;
+ 	for_each_available_child_of_node(np, child) {
++		if(an8801==1)break;
+ 		addr = of_mdio_parse_addr(&mdio->dev, child);
+ 		if (addr < 0) {
+ 			scanphys = true;
+@@ -234,7 +236,25 @@
+ 		}
+ 
+ 		if (of_mdiobus_child_is_phy(child))
++		{
++			if(addr==30)
++			{
++				int phy_id ;
++
++				phy_id = mdiobus_read(mdio, addr, MII_PHYSID1) << 16 ;
++				phy_id = phy_id + mdiobus_read(mdio, addr, MII_PHYSID2);
++				dev_info(&mdio->dev, "[of_mdio] %s %d  addr:%d phy_id:0x%x  \n",__func__, __LINE__, addr, phy_id);
++
++				if (phy_id==0 || phy_id==0x1a750000)
++				{
++					dev_info(&mdio->dev, "[of_mdio] %s %d  continue  \n",__func__, __LINE__);
++					continue;
++				}
++				else
++					an8801=1;
++			}
+ 			rc = of_mdiobus_register_phy(mdio, child, addr);
++		}
+ 		else
+ 			rc = of_mdiobus_register_device(mdio, child, addr);
+ 

feeds/mediatek-sdk/mt76/Makefile

@@ -493,10 +493,22 @@ define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR)/tools
 endef
 
+
 define Build/Install
 	:
 endef
 
+ifdef CONFIG_TARGET_PROFILE
+TARGET_PROFILE=$(subst ",,$(CONFIG_TARGET_PROFILE))
+PATCH_PROFILE_NAME=patches-$(subst DEVICE_,,$(TARGET_PROFILE))
+endif
+
+define Build/Patch
+	$(Build/Patch/Default)
+	$(call PatchDir,$(PKG_BUILD_DIR),$(PATCH_PROFILE_NAME)/,profile/)
+endef
+
+
 define Package/kmod-mt76/install
 	true
 endef

feeds/mediatek-sdk/mt76/patches-emplus_wap588m/3000-wifi-mt76-mt7915-emplus-wap588m-thermal-protech.patch

@@ -0,0 +1,26 @@
+Index: mt76-2024-04-03-1e336a85/mt7915/mt7915.h
+===================================================================
+--- mt76-2024-04-03-1e336a85.orig/mt7915/mt7915.h
++++ mt76-2024-04-03-1e336a85/mt7915/mt7915.h
+@@ -71,8 +71,8 @@
+ #define MT7915_CFEND_RATE_DEFAULT	0x49	/* OFDM 24M */
+ #define MT7915_CFEND_RATE_11B		0x03	/* 11B LP, 11M */
+ 
+-#define MT7915_THERMAL_THROTTLE_MAX	100
+-#define MT7915_CDEV_THROTTLE_MAX	99
++#define MT7915_THERMAL_THROTTLE_MAX	80
++#define MT7915_CDEV_THROTTLE_MAX	79
+ 
+ #define MT7915_SKU_RATE_NUM		161
+ #define MT7915_SKU_PATH_NUM		185
+@@ -86,8 +86,8 @@
+ 
+ #define MT7915_CRIT_TEMP_IDX		0
+ #define MT7915_MAX_TEMP_IDX		1
+-#define MT7915_CRIT_TEMP		110
+-#define MT7915_MAX_TEMP			120
++#define MT7915_CRIT_TEMP		103
++#define MT7915_MAX_TEMP			118
+ 
+ struct mt7915_vif;
+ struct mt7915_sta;

feeds/morse/kernel/mm-board-config/LICENSE.binaries

@@ -0,0 +1,125 @@
+                                  MORSE MICRO
+                     BINARY DISTRIBUTION LICENSE AGREEMENT
+
+1. Parties.
+This Software License Agreement (SLA) is between Morse Micro Pty. Ltd. and the
+user of the Software set forth (“you”, “user”, “customer”), and is effective as
+of the date of first access or download of the software by you. Morse Micro is
+licensing this software to you free of charge upon the condition that you
+accept all the terms of this SLA and only use this Software in conjunction with
+Morse Micro products. ANY USE, REPRODUCTION, OR DISTRIBUTION OF THE SOFTWARE
+CONSTITUTES YOUR ACCEPTANCE OF THIS AGREEMENT.
+
+2. Definitions.
+"Software" means any binary or source code that you have received from Morse
+Micro or its authorized licensees and/or those portions of such software
+produced by Program’s code within the Software, as well as any other machine
+readable materials (including, but not limited to, libraries, source files,
+header files, and data files), any updates or error corrections provided by
+Morse Micro, and any user manuals, programming guides and other documentation
+provided to you by Morse Micro under this SLA.
+
+3. License and Restrictions.
+Morse Micro grants you a non-exclusive, non-transferable, limited license
+without license fees to:
+
+    a. use the software solely with a hardware product that includes one of the
+    Morse Micro Wi-Fi HaLow chips, including
+    wireless modules or evaluation kits;
+
+    b. to reproduce and distribute the Software complete, unmodified, and as
+    provided by Morse Micro, solely for use with a hardware product that
+    includes one of the Morse Micro Wi-Fi HaLow chips, including wireless
+    modules or evaluation kits.
+
+4. Reservation of Rights.
+You should distribute Software with a copy of this SLA. Software is
+copyrighted. Title to Software and all associated intellectual property rights
+is retained by Morse Micro. Except as expressly provided herein, no license or
+right, express or implied, is hereby conveyed or granted to you by Morse Micro.
+You must retain all copyright notices on all Software, derivative works and
+documentation. The intellectual property and proprietary rights of whatever
+nature in the Software and derivative works are and will remain the exclusive
+property of Morse Micro or its suppliers. Nothing in this Agreement should be
+construed as transferring any aspects of such rights to you or any third party.
+Morse Micro and its suppliers reserve any and all rights not expressly granted
+in this Agreement. You may not sell, assign, sublicense, lease, or otherwise
+transfer any part of this license. You must not:
+
+    a. use, license, sell or otherwise distribute the Software except as
+    provided in this SLA;
+
+    b. attempt to modify in any way, reverse engineer, decompile or disassemble
+    any portion of the Software;
+
+    c. use the Software or other material in violation of any applicable law or
+    regulation, including but not limited to any regulatory agency.
+
+5. Ownership.
+The Software is licensed and not sold.  Title to and ownership of the Software,
+including all intellectual property rights thereto, and any portion thereof
+remain with Morse Micro or its licensors. You hereby covenant that you will not
+assert any claim that the Software created by or for Morse Micro infringe any
+intellectual property right owned or controlled by you.
+
+6. Termination.
+This SLA will terminate immediately without notice from Morse Micro if you fail
+to comply with any of its provisions, including the export laws provisions and
+Section 10 that may govern the export of the Software from certain
+jurisdictions, including technical data.
+
+7. Disclaimer and Limitation of Liability.
+THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MORSE MICRO
+FURTHER DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT
+LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
+PURPOSE OR NON-INFRINGEMENT. IN NO EVENT SHALL MORSE MICRO BE LIABLE FOR ANY
+INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES
+FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR ANY THIRD
+PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF MORSE MICRO HAS BEEN
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOFTWARE IS NOT INTENDED FOR
+USE IN ENVIRONMENTS OR APPLICATIONS WHERE EXTRAORDINARILY HIGH LEVELS OF
+QUALITY, RELIABILITY, AND FAILURE TOLERANCE ARE DEMANDED, AND/OR WHERE A
+MALFUNCTION OR FAILURE COULD LEAD TO SIGNIFICANT HARM TO LIFE, HEALTH,
+PROPERTY, OR RESULT IN SEVERE SOCIETAL REPERCUSSIONS ("CRITICAL APPLICATIONS").
+CRITICAL APPLICATIONS ENCOMPASS, BUT ARE NOT LIMITED TO, EQUIPMENT UTILIZED IN
+NUCLEAR FACILITIES, AVIATION AND SPACE EQUIPMENT, MEDICAL DEVICES, AUTOMOTIVE,
+TRAIN, MARINE, AND OTHER TRANSPORTATION EQUIPMENT, DEVICES INVOLVED IN
+CONTROLLING COMBUSTION OR EXPLOSIONS, SAFETY DEVICES, ELEVATORS AND ESCALATORS,
+DEVICES ASSOCIATED WITH ELECTRIC POWER, AND EQUIPMENT USED IN FINANCE-RELATED
+FIELDS.
+
+8. Survival.
+Sections 4, 5, 6, 7 and 10 will survive termination or expiration of this SLA.
+
+9. Privacy.
+Some features of the Software, if activated, may transmit a limited amount of
+data to Morse Micro (or its service provider) about the status of the system
+before a crash event. Morse Micro does not associate the data with personally
+identifiable information.
+
+10. Export Laws.
+YOU UNDERSTAND AND AGREE THAT THE SOFTWARE IS SUBJECT TO ALL APPLICABLE EXPORT-
+RELATED LAWS AND REGULATIONS AND THAT YOU MAY NOT EXPORT, RE-EXPORT OR TRANSFER
+THE SOFTWARE OR ANY DIRECT PRODUCT OF THE SOFTWARE EXCEPT AS PERMITTED UNDER
+THOSE LAWS. WITHOUT LIMITING THE FOREGOING, EXPORT, RE-EXPORT, OR TRANSFER OF
+THE SOFTWARE TO CUBA, IRAN, NORTH KOREA, SUDAN, AND SYRIA IS PROHIBITED.
+
+11. Governing Law.
+The laws of New South Wales, Australia, govern all matters arising out of or
+relating to this SLA without giving effect to any conflict of law principles.
+If any provision of this SLA is held to be unenforceable, this SLA will remain
+in effect with the provision omitted, unless omission would frustrate the
+intent of the parties, in which case this Agreement will immediately terminate.
+
+12. Entire Agreement.
+This Agreement constitutes the entire agreement between the parties and
+supersedes all prior and contemporaneous agreements, proposals or
+representations, written or oral, concerning its subject matter. No
+modification, amendment, or waiver of any provision of this Agreement will be
+effective unless in writing and either signed or accepted electronically by the
+party against whom the modification, amendment or waiver is to be asserted. A
+waiver of any breach under this Agreement does not constitute a waiver of any
+other breach or future breach.
+
+
+MORSE MICRO

feeds/morse/kernel/mm-board-config/Makefile

@@ -0,0 +1,86 @@
+#
+# Copyright 2022 Morse Micro
+#
+# This is free software, licensed under the MIT License.
+#
+# This package installs Morse Micro board configuration binaries, which are
+# distributed under the Morse Micro Binary Distribution License.
+# This license is available in LICENSE.binaries.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=morse-board-config
+PKG_RELEASE=6
+
+PKG_VERSION:=rel_1_12_4_2024_Jun_11
+
+PKG_SOURCE:=morsemicro-bcf-rel_1_12_4_2024_Jun_11.tar
+PKG_SOURCE_URL:=https://github.com/MorseMicro/bcf_binaries/releases/download/v1.12.4/
+PKG_HASH:=e403764730aa149e78874135da154bab2a24574308d3f2df88c9b4c125766ae3
+
+PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
+PKG_BUILD_PARALLEL:=1
+
+RSTRIP:=:
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/morse-board-config
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=$(PKG_SOURCE_URL)
+  TITLE:=Morse Micro WIFI HaLow Board Config File
+  PROVIDES:=morse-board-config
+endef
+
+define Package/morse-board-config-hotplug-model
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  TITLE:=Hotplug scripts for module type reporting
+  DEPENDS:=+morse-board-config
+endef
+
+define Package/morse-board-config-hotplug-model/description
+  When enabled, a hotplug script will be installed to
+  append a relevant module type suffix based on the value
+  programmed into the Morse chips OTP bits.
+endef
+
+TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
+
+define Build/Compile
+
+endef
+
+define Package/morse-board-config/install
+	$(INSTALL_DIR) $(1)/usr/share/morse-bcf
+	$(INSTALL_DIR) $(1)/lib/firmware/morse
+
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/firmware/morse/* $(1)/lib/firmware/morse/
+
+	# Install all files from override folder, including failsafe.
+	$(INSTALL_DATA) ./files/lib/firmware/morse/* $(1)/lib/firmware/morse/
+
+ifeq ($(CONFIG_TARGET_PROFILE), "DEVICE_edgecore_eap112")
+	ln -s /lib/firmware/morse/bcf_edgecore_eap112_fcc.bin $(1)/lib/firmware/morse/bcf_default.bin
+else
+	# Link the failsafe bcf by default so userspace can query the driver.
+	ln -s /lib/firmware/morse/bcf_failsafe.bin $(1)/lib/firmware/morse/bcf_default.bin
+endif
+	# Create symlinks for the production programmed otp devices
+	while IFS=, read -r board_type suffix serial; do \
+		ln -s /lib/firmware/morse/bcf_$$$${serial}.bin $(1)/lib/firmware/morse/bcf_boardtype_$$$${board_type}.bin; \
+	done < ./files/usr/share/morse-bcf/db.txt
+
+	$(INSTALL_DATA) ./files/usr/share/morse-bcf/db.txt $(1)/usr/share/morse-bcf/db.txt
+endef
+
+define Package/morse-board-config-hotplug-model/install
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/ieee80211
+	$(INSTALL_DATA) ./files/etc/hotplug.d/ieee80211/20-module-type $(1)/etc/hotplug.d/ieee80211/20-module-type
+endef
+
+$(eval $(call BuildPackage,morse-board-config))
+$(eval $(call BuildPackage,morse-board-config-hotplug-model))

feeds/morse/kernel/mm-board-config/files/etc/hotplug.d/ieee80211/20-module-type

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+[ "${ACTION}" = "add" ] && {
+	basename "$(readlink -f "/sys/${DEVPATH}/device/driver")" | grep '^morse_' || return;
+
+	board_type=$(printf "%04x" "$(cat /sys/${DEVPATH}/device/board_type)");
+
+	# Avoid mutating model information when OTP is not burnt, ie 0000.
+	[ "$board_type" = "0000" ] && return;
+
+	module_id=$(awk -F, '$1==b{print toupper($2)}' b="$board_type" /usr/share/morse-bcf/db.txt)
+
+	model=$(cat /tmp/sysinfo/model)
+
+	# Don't append a module id if that module id already exists in the model
+	[ "${model%-"$module_id"}" != "${model}" ] && return;
+
+	echo "$model-$module_id" > /tmp/sysinfo/model
+}

feeds/morse/kernel/mm-board-config/files/usr/share/morse-bcf/db.txt

@@ -0,0 +1 @@
+0801,05us,mf08651_us

feeds/morse/kernel/mm61xx/Makefile

@@ -0,0 +1,183 @@
+#
+# Copyright 2022 Morse Micro
+#
+# This is free software, licensed under the GPL 2 license.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=morse_driver
+PKG_RELEASE=3
+
+PKG_VERSION:=1.11.4
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+PKG_SOURCE_VERSION:=$(PKG_VERSION)
+PKG_SOURCE_URL:=https://github.com/MorseMicro/morse_driver.git
+PKG_HASH:=159d018a92e0cf742795ed49bd94fb6ed324163012bb91c2a2e4e0f6037bbf23
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=b2ab42a5f22527422adf6afab73f2d019c16f162
+
+PKG_MAINTAINER:=Morse Micro
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+
+DTC=$(wildcard $(LINUX_DIR)/scripts/dtc/dtc)
+
+define KernelPackage/morse
+  SUBMENU:=Wireless Drivers
+  TITLE:=Morse Micro WIFI HaLow driver
+  DEPENDS:= +kmod-mmc +kmod-mac80211 +kmod-trelay +kmod-lib-crc7 +morse-fw +morse-board-config
+  FILES:=\
+    $(PKG_BUILD_DIR)/morse.ko \
+    $(PKG_BUILD_DIR)/dot11ah/dot11ah.ko
+  AUTOLOAD:=$(call AutoProbe,morse)
+  MODPARAMS.morse:=country=US
+  PROVIDES:=kmod-morse
+endef
+
+define KernelPackage/morse/config
+
+       config MORSE_SDIO
+            bool "SDIO support "
+            default n
+            depends on PACKAGE_kmod-morse
+
+       config MORSE_SPI
+            bool "SPI support "
+            default y
+            depends on PACKAGE_kmod-morse
+
+       config MORSE_USER_ACCESS
+            bool "User space access support "
+            default y
+            depends on PACKAGE_kmod-morse
+
+       config MORSE_VENDOR_COMMAND
+            bool "Vendor command support "
+            default y
+            depends on PACKAGE_kmod-morse
+
+       config MORSE_MONITOR
+            bool "Monitor mode support "
+            default n
+            depends on PACKAGE_kmod-morse
+
+       config MORSE_DEBUG
+            bool "Enable debug "
+            default n
+            depends on PACKAGE_kmod-morse
+            help
+              Compiles the driver with debug info and some additional debug features.
+
+      config MORSE_DEBUG_LOGGING
+            bool "Enable debug logging"
+            default n
+            depends on PACKAGE_kmod-morse
+            select KERNEL_DYNAMIC_DEBUG_CORE
+            help
+              Enables debug level logging from the driver. Logging must be enabled at run time.
+              There may be a binary size and performance impact when this is y.
+
+       config MORSE_RC
+            bool "Enable MMRC (Morse Micro Rate Control) "
+            default y
+            depends on PACKAGE_kmod-morse
+
+       config MORSE_SDIO_ALIGNMENT
+            int "Required alignment for bulk SDIO reads/writes"
+            default 2
+            range 2 8
+            depends on MORSE_SDIO
+            help
+              Number of bytes to align data buffers for bulk SDIO transactions. Some hosts have
+              specific alignment requirements for DMA, use this setting to
+              adjust the alignment required.
+
+              Must be a power of 2.
+
+endef
+
+ifeq ($(CONFIG_MORSE_SDIO),y)
+  NOSTDINC_FLAGS += -DCONFIG_MORSE_SDIO
+  MORSE_MAKEDEFS += CONFIG_MORSE_SDIO=y
+endif
+
+ifeq ($(CONFIG_MORSE_SPI),y)
+  MORSE_MAKEDEFS += CONFIG_MORSE_SPI=y
+endif
+
+ifeq ($(CONFIG_MORSE_USER_ACCESS),y)
+  NOSTDINC_FLAGS += -DCONFIG_MORSE_USER_ACCESS
+  MORSE_MAKEDEFS += CONFIG_MORSE_USER_ACCESS=y
+endif
+
+ifeq ($(CONFIG_MORSE_VENDOR_COMMAND),y)
+  NOSTDINC_FLAGS += -DCONFIG_MORSE_VENDOR_COMMAND
+  MORSE_MAKEDEFS += CONFIG_MORSE_VENDOR_COMMAND=y
+endif
+
+ifeq ($(CONFIG_MORSE_MONITOR),y)
+  NOSTDINC_FLAGS += -DCONFIG_MORSE_MONITOR
+  MORSE_MAKEDEFS += CONFIG_MORSE_MONITOR=y
+endif
+
+ifeq ($(CONFIG_MORSE_DEBUG),y)
+  # This DEBUG (used by the driver Makefile) should not be confused with
+  # -DDEBUG (used by the kernel build system).
+  MORSE_MAKEDEFS += DEBUG=y
+  MORSE_MAKEDEFS += CONFIG_MORSE_DEBUGFS=y
+  MORSE_MAKEDEFS += CONFIG_MORSE_ENABLE_TEST_MODES=y
+else
+  MORSE_MAKEDEFS += DEBUG=n
+endif
+
+ifeq ($(CONFIG_MORSE_RC),y)
+  NOSTDINC_FLAGS += -DCONFIG_MORSE_RC
+  MORSE_MAKEDEFS += CONFIG_MORSE_RC=y
+endif
+
+MORSE_MAKEDEFS += \
+  MORSE_VERSION=0-$(PKG_VERSION) \
+  KERNEL_SRC=$(LINUX_DIR) \
+  CONFIG_MORSE_SDIO_ALIGNMENT=$(CONFIG_MORSE_SDIO_ALIGNMENT) \
+  CONFIG_BACKPORT_VERSION=v5.18.1
+# This refers to the version of mac80211 backported to OpenWrt
+# Occasionally patches are required to remove some parts of the driver
+# as OpenWrt may sometimes pull in further patches from later kernel versions
+# than that of the mac80211 backport.
+
+NOSTDINC_FLAGS = \
+	-I$(PKG_BUILD_DIR) \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport \
+	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211 \
+	-include backport/autoconf.h \
+	-include backport/backport.h
+
+ifeq ($(CONFIG_MORSE_DEBUG_LOGGING),y)
+  NOSTDINC_FLAGS += -DDYNAMIC_DEBUG_MODULE
+  NOSTDINC_FLAGS += -DDEBUG
+endif
+
+MORSE_MAKEDEFS += CONFIG_WLAN_VENDOR_MORSE=m
+MORSE_MAKEDEFS += V=1
+
+NOSTDINC_FLAGS += -DMORSE_TRACE_PATH=.
+
+include $(INCLUDE_DIR)/kernel-defaults.mk
+
+define Build/Compile
+	$(MAKE) $(MORSE_MAKEDEFS) $(PKG_JOBS) -C "$(LINUX_DIR)" \
+		$(KERNEL_MAKE_FLAGS) \
+		M="$(PKG_BUILD_DIR)" \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		modules
+endef
+
+$(eval $(call KernelPackage,morse))

feeds/morse/kernel/mm61xx/patches/002-fix-watchdog-interval.patch

@@ -0,0 +1,15 @@
+--- a/watchdog.c
++++ b/watchdog.c
+@@ -54,12 +54,7 @@ static enum hrtimer_restart morse_watchd
+ static void watchdog_timer_start(struct morse *mors)
+ {
+ 	ktime_t interval = ktime_set(mors->watchdog.interval_secs, 0);
+-
+-#if defined(MAC80211_BACKPORT_VERSION_CODE) && (KERNEL_VERSION(4, 10, 0) <= MAC80211_VERSION_CODE)
+-	hrtimer_start(&mors->watchdog.timer, interval.tv64, HRTIMER_MODE_REL);
+-#else
+ 	hrtimer_start(&mors->watchdog.timer, interval, HRTIMER_MODE_REL);
+-#endif
+ }
+
+ int morse_watchdog_start(struct morse *mors)

feeds/morse/kernel/mm61xx/patches/003-ekh01-spi-fix.patch

@@ -0,0 +1,60 @@
+--- a/spi.c
++++ b/spi.c
+@@ -175,10 +175,12 @@ static int morse_spi_setup(struct spi_de
+ 	spi->bits_per_word = 8;
+ 	spi->max_speed_hz = max_speed_hz;
+ 
++#if 0
+ 	if (spi->max_speed_hz > MAX_SPI_CLK_SPEED) {
+ 		dev_err(&spi->dev, "SPI clocks above 50MHz are not supported by Morse chip\n");
+ 		return -EPERM;
+ 	}
++#endif
+ 
+ 	ret = spi_setup(spi);
+ 	if (ret < 0) {
+@@ -432,7 +434,7 @@ static u8 *morse_spi_find_data_ack(struc
+ {
+ 	u8 *cp = data;
+ 
+-	while (cp < end && *cp == 0xff)
++	while (cp < end && (SPI_MMC_RESPONSE_CODE(*cp) != SPI_RESPONSE_ACCEPTED))
+ 		cp++;
+ 
+ 	if (cp == end)
+@@ -529,13 +531,10 @@ static int morse_spi_cmd53_read(struct m
+ 	cp += 4;
+ 
+ 	if (!block) {
+-		/* Scale bytes delay to block */
+-		u32 extra_bytes = (count * mspi->inter_block_delay_bytes) / MMC_SPI_BLOCKSIZE;
+-
+ 		/* Allow 4 bytes for CRC and another 10 bytes for start block token & chip delays
+ 		 * (usually comes in 2).
+ 		 */
+-		data_size = count + 4 + 4 + extra_bytes;
++		data_size = count + 4 + 4 + mspi->inter_block_delay_bytes;
+ 		if (is_rk3288)
+ 			/* Short transactions are sometimes delayed. These extra bytes give enough
+ 			 * cycles to receive all the data. This could be optimised to a lower
+@@ -601,6 +600,7 @@ static int morse_spi_cmd53_write(struct
+ 	u8 *resp;
+ 	u8 *end;
+ 	u8 *ack = cp;
++	u8 *test_ack;
+ 	u32 data_size;
+ 	int i;
+ 
+@@ -656,10 +656,11 @@ static int morse_spi_cmd53_write(struct
+ 		/* crc */
+ 		*cp = (crc & 0xFF00) >> 8;
+ 		*(cp + 1) = (crc & 0xFF);
++		test_ack = cp + 2;
+ 		cp += sizeof(crc);
+ 
+ 		/* Allow more bytes for status and chip processing (depends on CLK) */
+-		cp += block ? mspi->inter_block_delay_bytes : 4;
++		cp += mspi->inter_block_delay_bytes;
+ 	}
+ 
+ 	/* Do the actual transfer */

feeds/morse/kernel/mm61xx/patches/004-fix-kernel-version-check.patch

@@ -0,0 +1,13 @@
+Index: morse_driver-rel_1_12_3_2024_May_23/sdio.c
+===================================================================
+--- morse_driver-rel_1_12_3_2024_May_23.orig/sdio.c
++++ morse_driver-rel_1_12_3_2024_May_23/sdio.c
+@@ -572,7 +572,7 @@ static int morse_sdio_reset(int reset_pi
+ 
+ 	sdio_claim_host(func);
+ 	sdio_disable_func(func);
+-#if KERNEL_VERSION(5, 18, 0) > LINUX_VERSION_CODE
++#if KERNEL_VERSION(5, 18, 0) > MAC80211_VERSION_CODE
+ 	mmc_hw_reset(func->card->host);
+ #else
+ 	mmc_hw_reset(func->card);

feeds/morse/kernel/mm61xx/patches/007-sysfs-add-sysfs-to-export-board-type-as-a-device-att.patch

@@ -0,0 +1,160 @@
+From 9ebc9a01e90f65f058ed21d3190800dc130b6ef4 Mon Sep 17 00:00:00 2001
+From: Arien Judge <arien.judge@morsemicro.com>
+Date: Wed, 28 Feb 2024 13:29:28 +1100
+Subject: [PATCH] sysfs: add sysfs to export board type as a device attribute
+
+The driver reads the board type from OTP to decide which bcf file to load,
+but doesn't report this information anywhere useful.
+
+Read the value read from OTP as a sysfs device attribute to allow userspace
+applications to reliably report the module type on chip.
+
+Opted for creating a proper sysfs device attribute here instead of using
+debugfs as we shouldn't expect user tooling to have such a hard dependency
+
+cache board id on firmware init for sysfs reporting
+---
+ Makefile   |  1 +
+ firmware.c |  3 +++
+ mac.c      |  6 ++++++
+ morse.h    |  1 +
+ sysfs.c    | 46 ++++++++++++++++++++++++++++++++++++++++++++++
+ sysfs.h    |  9 +++++++++
+ 6 files changed, 66 insertions(+)
+ create mode 100644 sysfs.c
+ create mode 100644 sysfs.h
+
+Index: morse_driver-rel_1_12_3_2024_May_23/Makefile
+===================================================================
+--- morse_driver-rel_1_12_3_2024_May_23.orig/Makefile
++++ morse_driver-rel_1_12_3_2024_May_23/Makefile
+@@ -96,6 +96,7 @@ endif
+ obj-$(CONFIG_WLAN_VENDOR_MORSE) += morse.o dot11ah/
+ 
+ morse-y = mac.o
++morse-y += sysfs.o
+ morse-y += init.o
+ morse-y += skbq.o
+ morse-y += debug.o
+Index: morse_driver-rel_1_12_3_2024_May_23/firmware.c
+===================================================================
+--- morse_driver-rel_1_12_3_2024_May_23.orig/firmware.c
++++ morse_driver-rel_1_12_3_2024_May_23/firmware.c
+@@ -881,6 +881,9 @@ int morse_firmware_init(struct morse *mo
+ 	if (mors->cfg->get_board_type && enable_otp_check)
+ 		board_id = mors->cfg->get_board_type(mors);
+ 
++	/* store the board id for sysfs reporting. Propagate the error */
++	mors->board_id = board_id;
++
+ 	if (strlen(board_config_file) > 0) {
+ 		n = snprintf(bcf_path, sizeof(bcf_path), "%s/%s", MORSE_FW_DIR, board_config_file);
+ 	} else if (strlen(mors->board_serial) > 0) {
+Index: morse_driver-rel_1_12_3_2024_May_23/mac.c
+===================================================================
+--- morse_driver-rel_1_12_3_2024_May_23.orig/mac.c
++++ morse_driver-rel_1_12_3_2024_May_23/mac.c
+@@ -14,6 +14,7 @@
+ #include "mac.h"
+ #include "s1g_ies.h"
+ #include "bus.h"
++#include "sysfs.h"
+ #include "debug.h"
+ #include "command.h"
+ #include "vendor.h"
+@@ -6422,6 +6423,10 @@ int morse_mac_register(struct morse *mor
+ 	INIT_WORK(&mors->driver_restart, morse_mac_restart_work);
+ 	INIT_WORK(&mors->health_check, morse_health_check_work);
+ 
++	ret = morse_sysfs_init(mors);
++	if (ret)
++		MORSE_ERR(mors, "Unable to initialise sysfs\n");
++
+ 	ret = morse_init_debug(mors);
+ 	if (ret)
+ 		MORSE_ERR(mors, "Unable to create debugfs files\n");
+@@ -6593,6 +6598,7 @@ static void morse_mac_deinit(struct mors
+ 
+ void morse_mac_unregister(struct morse *mors)
+ {
++	morse_sysfs_free(mors);
+ 	morse_deinit_debug(mors);
+ 	morse_ps_disable(mors);
+ 
+Index: morse_driver-rel_1_12_3_2024_May_23/morse.h
+===================================================================
+--- morse_driver-rel_1_12_3_2024_May_23.orig/morse.h
++++ morse_driver-rel_1_12_3_2024_May_23/morse.h
+@@ -979,6 +979,7 @@ struct morse {
+ 	struct morse_debug debug;
+ 
+ 	char *board_serial;
++	int board_id;
+ 
+ 	/* Stored Channel Information, sta_type, enc_mode, RAW */
+ 	struct morse_custom_configs custom_configs;
+Index: morse_driver-rel_1_12_3_2024_May_23/sysfs.c
+===================================================================
+--- /dev/null
++++ morse_driver-rel_1_12_3_2024_May_23/sysfs.c
+@@ -0,0 +1,46 @@
++/*
++ * Copyright 2024 Morse Micro
++ *
++ */
++
++#include <linux/sysfs.h>
++#include "morse.h"
++#include "sysfs.h"
++#include "debug.h"
++
++static ssize_t board_type_show(struct device *dev,
++					   struct device_attribute *attr,
++					   char *buf)
++{
++	struct morse *mors = dev_get_drvdata(dev);
++
++	if (!mors)
++		return -EINVAL;
++
++	if (mors->board_id < 0)
++		return mors->board_id;
++
++#if KERNEL_VERSION(5, 10, 0) <= LINUX_VERSION_CODE
++	return sysfs_emit(buf, "%d\n", mors->board_id);
++#else
++	return snprintf(buf, PAGE_SIZE, "%d\n", mors->board_id);
++#endif
++}
++
++static DEVICE_ATTR_RO(board_type);
++
++int morse_sysfs_init(struct morse *mors)
++{
++	int ret;
++
++	ret = device_create_file(mors->dev, &dev_attr_board_type);
++	if (ret < 0)
++		MORSE_ERR(mors, "failed to create sysfs file board_type");
++
++	return ret;
++}
++
++void morse_sysfs_free(struct morse *mors)
++{
++	device_remove_file(mors->dev, &dev_attr_board_type);
++}
+Index: morse_driver-rel_1_12_3_2024_May_23/sysfs.h
+===================================================================
+--- /dev/null
++++ morse_driver-rel_1_12_3_2024_May_23/sysfs.h
+@@ -0,0 +1,9 @@
++/*
++ * Copyright 2024 Morse Micro
++ *
++ */
++
++#pragma once
++
++int morse_sysfs_init(struct morse *mors);
++void morse_sysfs_free(struct morse *mors);

feeds/morse/kernel/mm61xx/patches/010-fix-sdio-error.patch

@@ -0,0 +1,13 @@
+--- a/sdio.c
++++ b/sdio.c
+@@ -587,9 +587,5 @@ static int morse_sdio_reset(int reset_pi
+	sdio_claim_host(func);
+	sdio_disable_func(func);
+-#if KERNEL_VERSION(5, 18, 0) > MAC80211_VERSION_CODE
+	mmc_hw_reset(func->card->host);
+-#else
+-	mmc_hw_reset(func->card);
+-#endif
+	sdio_enable_func(func);
+	sdio_release_host(func);
+

feeds/morse/kernel/mm61xx/patches/011-update-spi.patch

@@ -0,0 +1,73 @@
+--- a/spi.c	2025-01-10 18:08:57.753837165 +0800
++++ b/spi.c	2025-01-13 14:17:01.746850459 +0800
+@@ -1057,7 +1057,7 @@ static irqreturn_t morse_spi_irq_handler
+	struct morse *mors = spi_get_drvdata(mspi->spi);
+
+	MORSE_WARN_ON(FEATURE_ID_SPI, !mors);
+-	if (irq == gpio_to_irq(mors->cfg->mm_spi_irq_gpio)) {
++
+		/*
+		 * If we are using edge interrupts, we need to continuously service the IRQ until
+		 * either the chip has cleared all its IRQ bits, or the pin goes high again.
+@@ -1067,8 +1067,7 @@ static irqreturn_t morse_spi_irq_handler
+		} while (spi_use_edge_irq && ret && !gpio_get_value(mors->cfg->mm_spi_irq_gpio));
+
+		return IRQ_HANDLED;
+-	}
+-	return IRQ_NONE;
++
+ }
+
+ static void morse_spi_enable_irq(struct morse_spi *mspi)
+@@ -1311,10 +1310,15 @@ static int morse_spi_probe(struct spi_de
+		ret = morse_spi_cmd(mspi, SD_IO_MORSE_INIT, 0x00000000);
+		if (!ret)
+			break;
+-		pr_info("%s: SD_IO_RESET\n", __func__);
++		MORSE_DBG(mors, "%s: SD_IO_RESET\n", __func__);
+		morse_spi_cmd(mspi, SD_IO_RESET, 0x00000000);
+	}
+
++	if (ret) {
++		MORSE_SPI_ERR(mors, "failed initialise SPI: %d\n", ret);
++		goto err_cfg;
++	}
++
+	ret = morse_chip_cfg_detect_and_init(mors, mors_chip_series);
+	if (ret) {
+		MORSE_SPI_ERR(mors, "morse_chip_cfg_detect_and_init failed: %d\n", ret);
+@@ -1327,7 +1331,11 @@ static int morse_spi_probe(struct spi_de
+	mors->cfg->mm_ps_gpios_supported = true;
+	ret = morse_spi_reg32_read(mors, MORSE_REG_CHIP_ID(mors), &mors->chip_id);
+
+-	if (!ret) {
++	if (ret) {
++		MORSE_SPI_ERR(mors, "failed to read chip id: %d\n", ret);
++		goto err_cfg;
++	}
++
+		/* Find out if the chip id matches our records */
+		if (!morse_hw_is_valid_chip_id(mors->chip_id, mors->cfg->valid_chip_ids)) {
+			MORSE_SPI_ERR(mors, "%s Morse chip (ChipId=0x%x) not supported\n",
+@@ -1357,9 +1365,6 @@ static int morse_spi_probe(struct spi_de
+								mspi->inter_block_delay_bytes);
+			}
+		}
+-	} else {
+-		goto err_cfg;
+-	}
+
+	MORSE_SPI_INFO(mors, "Morse Micro SPI device found, chip ID=0x%04x\n", mors->chip_id);
+	MORSE_SPI_INFO(mors, "Board serial: %s\n", mors->board_serial);
+@@ -1442,6 +1447,11 @@ static int morse_spi_probe(struct spi_de
+ #ifdef CONFIG_MORSE_ENABLE_TEST_MODES
+	if (test_mode == MORSE_CONFIG_TEST_MODE_BUS)
+		ret = morse_bus_test(mors, "SPI");
++
++	if (test_mode == MORSE_CONFIG_TEST_MODE_BUS_PROFILE) {
++		morse_bus_throughput_profiler(mors);
++		morse_spi_disable_irq(mspi);
++	}
+ #endif
+ 
+ 	return ret;

feeds/morse/kernel/morse-fw/LICENSE.binaries

@@ -0,0 +1,125 @@
+                                  MORSE MICRO
+                     BINARY DISTRIBUTION LICENSE AGREEMENT
+
+1. Parties.
+This Software License Agreement (SLA) is between Morse Micro Pty. Ltd. and the
+user of the Software set forth (“you”, “user”, “customer”), and is effective as
+of the date of first access or download of the software by you. Morse Micro is
+licensing this software to you free of charge upon the condition that you
+accept all the terms of this SLA and only use this Software in conjunction with
+Morse Micro products. ANY USE, REPRODUCTION, OR DISTRIBUTION OF THE SOFTWARE
+CONSTITUTES YOUR ACCEPTANCE OF THIS AGREEMENT.
+
+2. Definitions.
+"Software" means any binary or source code that you have received from Morse
+Micro or its authorized licensees and/or those portions of such software
+produced by Program’s code within the Software, as well as any other machine
+readable materials (including, but not limited to, libraries, source files,
+header files, and data files), any updates or error corrections provided by
+Morse Micro, and any user manuals, programming guides and other documentation
+provided to you by Morse Micro under this SLA.
+
+3. License and Restrictions.
+Morse Micro grants you a non-exclusive, non-transferable, limited license
+without license fees to:
+
+    a. use the software solely with a hardware product that includes one of the
+    Morse Micro Wi-Fi HaLow chips, including
+    wireless modules or evaluation kits;
+
+    b. to reproduce and distribute the Software complete, unmodified, and as
+    provided by Morse Micro, solely for use with a hardware product that
+    includes one of the Morse Micro Wi-Fi HaLow chips, including wireless
+    modules or evaluation kits.
+
+4. Reservation of Rights.
+You should distribute Software with a copy of this SLA. Software is
+copyrighted. Title to Software and all associated intellectual property rights
+is retained by Morse Micro. Except as expressly provided herein, no license or
+right, express or implied, is hereby conveyed or granted to you by Morse Micro.
+You must retain all copyright notices on all Software, derivative works and
+documentation. The intellectual property and proprietary rights of whatever
+nature in the Software and derivative works are and will remain the exclusive
+property of Morse Micro or its suppliers. Nothing in this Agreement should be
+construed as transferring any aspects of such rights to you or any third party.
+Morse Micro and its suppliers reserve any and all rights not expressly granted
+in this Agreement. You may not sell, assign, sublicense, lease, or otherwise
+transfer any part of this license. You must not:
+
+    a. use, license, sell or otherwise distribute the Software except as
+    provided in this SLA;
+
+    b. attempt to modify in any way, reverse engineer, decompile or disassemble
+    any portion of the Software;
+
+    c. use the Software or other material in violation of any applicable law or
+    regulation, including but not limited to any regulatory agency.
+
+5. Ownership.
+The Software is licensed and not sold.  Title to and ownership of the Software,
+including all intellectual property rights thereto, and any portion thereof
+remain with Morse Micro or its licensors. You hereby covenant that you will not
+assert any claim that the Software created by or for Morse Micro infringe any
+intellectual property right owned or controlled by you.
+
+6. Termination.
+This SLA will terminate immediately without notice from Morse Micro if you fail
+to comply with any of its provisions, including the export laws provisions and
+Section 10 that may govern the export of the Software from certain
+jurisdictions, including technical data.
+
+7. Disclaimer and Limitation of Liability.
+THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MORSE MICRO
+FURTHER DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT
+LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
+PURPOSE OR NON-INFRINGEMENT. IN NO EVENT SHALL MORSE MICRO BE LIABLE FOR ANY
+INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES
+FOR LOSS OF PROFITS, REVENUE, DATA OR DATA USE, INCURRED BY YOU OR ANY THIRD
+PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN IF MORSE MICRO HAS BEEN
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOFTWARE IS NOT INTENDED FOR
+USE IN ENVIRONMENTS OR APPLICATIONS WHERE EXTRAORDINARILY HIGH LEVELS OF
+QUALITY, RELIABILITY, AND FAILURE TOLERANCE ARE DEMANDED, AND/OR WHERE A
+MALFUNCTION OR FAILURE COULD LEAD TO SIGNIFICANT HARM TO LIFE, HEALTH,
+PROPERTY, OR RESULT IN SEVERE SOCIETAL REPERCUSSIONS ("CRITICAL APPLICATIONS").
+CRITICAL APPLICATIONS ENCOMPASS, BUT ARE NOT LIMITED TO, EQUIPMENT UTILIZED IN
+NUCLEAR FACILITIES, AVIATION AND SPACE EQUIPMENT, MEDICAL DEVICES, AUTOMOTIVE,
+TRAIN, MARINE, AND OTHER TRANSPORTATION EQUIPMENT, DEVICES INVOLVED IN
+CONTROLLING COMBUSTION OR EXPLOSIONS, SAFETY DEVICES, ELEVATORS AND ESCALATORS,
+DEVICES ASSOCIATED WITH ELECTRIC POWER, AND EQUIPMENT USED IN FINANCE-RELATED
+FIELDS.
+
+8. Survival.
+Sections 4, 5, 6, 7 and 10 will survive termination or expiration of this SLA.
+
+9. Privacy.
+Some features of the Software, if activated, may transmit a limited amount of
+data to Morse Micro (or its service provider) about the status of the system
+before a crash event. Morse Micro does not associate the data with personally
+identifiable information.
+
+10. Export Laws.
+YOU UNDERSTAND AND AGREE THAT THE SOFTWARE IS SUBJECT TO ALL APPLICABLE EXPORT-
+RELATED LAWS AND REGULATIONS AND THAT YOU MAY NOT EXPORT, RE-EXPORT OR TRANSFER
+THE SOFTWARE OR ANY DIRECT PRODUCT OF THE SOFTWARE EXCEPT AS PERMITTED UNDER
+THOSE LAWS. WITHOUT LIMITING THE FOREGOING, EXPORT, RE-EXPORT, OR TRANSFER OF
+THE SOFTWARE TO CUBA, IRAN, NORTH KOREA, SUDAN, AND SYRIA IS PROHIBITED.
+
+11. Governing Law.
+The laws of New South Wales, Australia, govern all matters arising out of or
+relating to this SLA without giving effect to any conflict of law principles.
+If any provision of this SLA is held to be unenforceable, this SLA will remain
+in effect with the provision omitted, unless omission would frustrate the
+intent of the parties, in which case this Agreement will immediately terminate.
+
+12. Entire Agreement.
+This Agreement constitutes the entire agreement between the parties and
+supersedes all prior and contemporaneous agreements, proposals or
+representations, written or oral, concerning its subject matter. No
+modification, amendment, or waiver of any provision of this Agreement will be
+effective unless in writing and either signed or accepted electronically by the
+party against whom the modification, amendment or waiver is to be asserted. A
+waiver of any breach under this Agreement does not constitute a waiver of any
+other breach or future breach.
+
+
+MORSE MICRO

feeds/morse/kernel/morse-fw/Makefile

@@ -0,0 +1,53 @@
+#
+# Copyright 2022 Morse Micro
+#
+# This is free software, licensed under the MIT License.
+#
+# This package installs Morse Micro firmware binaries, which are
+# distributed under the Morse Micro Binary Distribution License.
+# This license is available in LICENSE.binaries.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=morse-fw
+PKG_RELEASE=2
+
+PKG_VERSION:=rel_1_11_4_2024_Jul_09
+
+PKG_SOURCE:=morsemicro-fw-rel_1_11_4_2024_Jul_09.tar
+PKG_SOURCE_URL:=https://github.com/MorseMicro/firmware_binaries/releases/download/v1.11.4/
+PKG_HASH:=6df1e39655278adf140776b3e76b8faced41828a9d482363aed0795e96f5d241
+
+PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
+PKG_BUILD_PARALLEL:=1
+
+RSTRIP:=:
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/morse-fw
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  URL:=$(PKG_SOURCE_URL)
+  TITLE:=Morse Micro WIFI HaLow firmware
+  PROVIDES:=morse-fw
+endef
+
+TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
+
+define Build/Compile
+
+endef
+
+define Package/morse-fw/install
+	$(INSTALL_DIR) $(1)/lib/firmware/morse/.
+	if [ -e ./files/lib/firmware/morse/mm6108.bin ]; then \
+		$(INSTALL_DATA) ./files/lib/firmware/morse/mm6108.bin $(1)/lib/firmware/morse/; \
+	else \
+		$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/firmware/morse/mm6108.bin $(1)/lib/firmware/morse/; \
+	fi
+endef
+
+$(eval $(call BuildPackage,morse-fw))

feeds/morse/morse-regdb/Makefile

@@ -0,0 +1,68 @@
+#
+# Copyright 2023 Morse Micro
+#
+# This is free software, licensed under the 3-Clause BSD License.
+#
+
+# Because the contents of morse_regdb are private, this package does
+# some tricky things to _avoid_ downloading under normal circumstances,
+# instead using a cached file stored in this repository. If you'd like
+# to regenerate the cached file, do:
+#
+#   make package/morse-regdb/clean package/morse-regdb/download package/morse-regdb/compile V=sc REGENERATE=1
+#
+include $(TOPDIR)/rules.mk
+
+
+PKG_NAME:=morse-regdb
+PKG_RELEASE:=1
+PKG_BUILD_DEPENDS:=python3/host
+
+PKG_SOURCE_VERSION:=v2.1.1
+PKG_SOURCE_URL:=https://github.com/MorseMicro/morse_regdb.git
+PKG_SOURCE_PROTO:=git
+PKG_MIRROR_HASH:=0d074d2810f520c138427ab63ce0b8ab61f0f073cf7cd91177ad840a3322540a
+
+PKG_VERSION:=$(PKG_SOURCE_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+# Skip download unless REGENERATE is on.
+# This must occur after including package.mk, as PKG_SKIP_DOWNLOAD is defined there.
+PKG_SKIP_DOWNLOAD=$(USE_SOURCE_DIR)$(USE_GIT_TREE)$(USE_GIT_SRC_CHECKOUT)$(if $(REGENERATE),,1)
+
+define Package/morse-regdb
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Regulatory data for 802.11ah
+  URL:=https://bitbucket.org/morsemicro/morse_regdb/src/master/
+  PKGARCH:=all
+endef
+
+define Package/morse-regdb/description
+	Regulatory data for 802.11ah in a csv.
+endef
+
+define Build/Prepare
+	$(if $(REGENERATE),$(call Build/Prepare/Default))
+endef
+
+define Build/Compile
+	$(if $(REGENERATE),
+		mkdir -p artefacts
+		python3 $(PKG_BUILD_DIR)/regdbconverter.py -v -f csv $(PKG_BUILD_DIR)/regdb_Sub-1_GHz.tsv > artefacts/repo_channels.csv
+	)
+	mkdir -p $(PKG_BUILD_DIR)/artefacts
+	# Mash the 5g shim channels in.
+	python3 add_5g_shim_channels.py < artefacts/repo_channels.csv > $(PKG_BUILD_DIR)/artefacts/channels.csv
+endef
+
+define Package/morse-regdb/install
+	$(INSTALL_DIR) $(1)/usr/share/morse-regdb
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/artefacts/* $(1)/usr/share/morse-regdb
+	# Make channels.csv accessible from the web.
+	$(INSTALL_DIR) $(1)/www
+	ln -sf /usr/share/morse-regdb/channels.csv $(1)/www/halow-channels.csv
+endef
+
+$(eval $(call BuildPackage,morse-regdb))

feeds/morse/morse-regdb/add_5g_shim_channels.py

@@ -0,0 +1,88 @@
+#!/usr/bin/env python3
+
+
+import csv
+import sys
+
+# Fake 5g channels reported by netlink instead of 1g channels.
+S1G_TO_5G= {
+    1: 132,
+    2: 134,
+    3: 136,
+    4: 'NA',
+    5: 36,
+    6: 38,
+    7: 40,
+    8: 42,
+    9: 44,
+    10: 46,
+    11: 48,
+    12: 50,
+    13: 52,
+    14: 54,
+    15: 56,
+    16: 58,
+    17: 60,
+    18: 62,
+    19: 64,
+    20: 'NA',
+    21: 100,
+    22: 102,
+    23: 104,
+    24: 106,
+    25: 108,
+    26: 110,
+    27: 112,
+    28: 114,
+    29: 116,
+    30: 118,
+    31: 120,
+    32: 122,
+    33: 124,
+    34: 126,
+    35: 128,
+    36: 'NA',
+    37: 149,
+    38: 151,
+    39: 153,
+    40: 155,
+    41: 157,
+    42: 159,
+    43: 161,
+    44: 163,
+    45: 165,
+    46: 167,
+    47: 169,
+    48: 171,
+    49: 173,
+    50: 175,
+    51: 177,
+}
+
+# Japanese channels are... different.
+JAPAN_S1G_TO_5G = {
+    9: 108,
+    13: 36,
+    15: 40,
+    17: 44,
+    19: 48,
+    21: 64,
+    2: 38,
+    6: 46,
+    4: 54,
+    8: 62,
+    36: 42,
+    38: 58,
+}
+
+
+dr = csv.DictReader(sys.stdin)
+dw = csv.DictWriter(sys.stdout, dr.fieldnames + ['5g_chan'], lineterminator='\n')
+dw.writeheader()
+for row in dr:
+     m = JAPAN_S1G_TO_5G if row['country_code'] == 'JP' else S1G_TO_5G
+     row['5g_chan'] = m.get(int(row['s1g_chan']))
+
+     assert row['5g_chan'], f'Missing 5G chan map for Channel {row["s1g_chan"]} in {row["country_code"]}'
+
+     dw.writerow(row)

feeds/morse/morse-regdb/artefacts/repo_channels.csv

@@ -0,0 +1,473 @@
+country_code,bw,s1g_chan,s1g_op_class,global_op_class,centre_freq_mhz,duty_cycle_ap,duty_cycle_sta,country,tx_power_max,duty_cycle_omit_ctrl_resp,pkt_spacing_ms,airtime_min_ms,airtime_max_ms,usable_banff_c
+AL,1,1,6,66,863.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
+AL,1,3,6,66,864.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
+AL,1,5,6,66,865.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
+AL,1,7,6,66,866.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
+AL,1,9,6,66,867.5,10.0,2.8,Albania,16.13,False,0.0,0.0,0.0,1
+AR,1,27,1,68,915.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,29,1,68,916.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,31,1,68,917.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,33,1,68,918.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,35,1,68,919.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,37,1,68,920.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,39,1,68,921.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,41,1,68,922.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,43,1,68,923.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,45,1,68,924.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,47,1,68,925.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,49,1,68,926.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,1,51,1,68,927.5,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,2,30,2,69,917.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,2,34,2,69,919.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,2,38,2,69,921.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,2,42,2,69,923.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,2,46,2,69,925.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,2,50,2,69,927.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,4,32,3,70,918.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,4,40,3,70,922.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,4,48,3,70,926.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AR,8,44,4,71,924.0,100.0,100.0,Argentina,36.0,False,0.0,0.0,0.0,1
+AT,1,1,6,66,863.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
+AT,1,3,6,66,864.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
+AT,1,5,6,66,865.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
+AT,1,7,6,66,866.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
+AT,1,9,6,66,867.5,10.0,2.8,Austria,16.13,False,0.0,0.0,0.0,1
+AU,1,27,22,68,915.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,29,22,68,916.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,31,22,68,917.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,33,22,68,918.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,35,22,68,919.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,37,22,68,920.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,39,22,68,921.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,41,22,68,922.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,43,22,68,923.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,45,22,68,924.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,47,22,68,925.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,49,22,68,926.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,1,51,22,68,927.5,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,2,30,23,69,917.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,2,34,23,69,919.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,2,38,23,69,921.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,2,42,23,69,923.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,2,46,23,69,925.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,2,50,23,69,927.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,4,32,24,70,918.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,4,40,24,70,922.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,4,48,24,70,926.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+AU,8,44,25,71,924.0,100.0,100.0,Australia,30.0,False,0.0,0.0,0.0,1
+BA,1,1,6,66,863.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
+BA,1,3,6,66,864.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
+BA,1,5,6,66,865.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
+BA,1,7,6,66,866.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
+BA,1,9,6,66,867.5,10.0,2.8,Bosnia and Herzegovina,16.13,False,0.0,0.0,0.0,1
+BE,1,1,6,66,863.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BE,1,3,6,66,864.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BE,1,5,6,66,865.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BE,1,7,6,66,866.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BE,1,9,6,66,867.5,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BE,1,31,30,77,916.9,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BE,1,33,30,77,917.9,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BE,1,35,30,77,918.9,10.0,2.8,Belgium,16.13,False,0.0,0.0,0.0,1
+BG,1,1,6,66,863.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
+BG,1,3,6,66,864.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
+BG,1,5,6,66,865.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
+BG,1,7,6,66,866.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
+BG,1,9,6,66,867.5,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
+BG,1,33,30,77,917.9,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
+BG,1,35,30,77,918.9,10.0,2.8,Bulgaria,16.13,False,0.0,0.0,0.0,1
+BR,1,1,1,68,902.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,0
+BR,1,3,1,68,903.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,5,1,68,904.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,7,1,68,905.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,9,1,68,906.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,2,2,2,69,903.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,0
+BR,2,6,2,69,905.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,27,1,68,915.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,29,1,68,916.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,31,1,68,917.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,33,1,68,918.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,35,1,68,919.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,37,1,68,920.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,39,1,68,921.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,41,1,68,922.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,43,1,68,923.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,45,1,68,924.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,47,1,68,925.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,49,1,68,926.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,1,51,1,68,927.5,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,2,30,2,69,917.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,2,34,2,69,919.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,2,38,2,69,921.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,2,42,2,69,923.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,2,46,2,69,925.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,2,50,2,69,927.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,4,32,3,70,918.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,4,40,3,70,922.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,4,48,3,70,926.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+BR,8,44,4,71,924.0,100.0,100.0,Brazil,36.0,False,0.0,0.0,0.0,1
+CA,1,1,1,68,902.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,0
+CA,1,3,1,68,903.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,5,1,68,904.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,7,1,68,905.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,9,1,68,906.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,11,1,68,907.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,13,1,68,908.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,15,1,68,909.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,17,1,68,910.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,19,1,68,911.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,21,1,68,912.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,23,1,68,913.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,25,1,68,914.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,27,1,68,915.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,29,1,68,916.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,31,1,68,917.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,33,1,68,918.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,35,1,68,919.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,37,1,68,920.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,39,1,68,921.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,41,1,68,922.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,43,1,68,923.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,45,1,68,924.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,47,1,68,925.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,49,1,68,926.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,1,51,1,68,927.5,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,2,2,69,903.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,0
+CA,2,6,2,69,905.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,10,2,69,907.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,14,2,69,909.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,18,2,69,911.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,22,2,69,913.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,26,2,69,915.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,30,2,69,917.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,34,2,69,919.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,38,2,69,921.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,42,2,69,923.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,46,2,69,925.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,2,50,2,69,927.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,4,8,3,70,906.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,4,16,3,70,910.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,4,24,3,70,914.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,4,32,3,70,918.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,4,40,3,70,922.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,4,48,3,70,926.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,8,12,4,71,908.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,8,28,4,71,916.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CA,8,44,4,71,924.0,100.0,100.0,Canada,36.0,False,0.0,0.0,0.0,1
+CH,1,1,6,66,863.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
+CH,1,3,6,66,864.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
+CH,1,5,6,66,865.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
+CH,1,7,6,66,866.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
+CH,1,9,6,66,867.5,10.0,2.8,Switzerland,16.13,False,0.0,0.0,0.0,1
+CY,1,1,6,66,863.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
+CY,1,3,6,66,864.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
+CY,1,5,6,66,865.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
+CY,1,7,6,66,866.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
+CY,1,9,6,66,867.5,10.0,2.8,Cypress,16.13,False,0.0,0.0,0.0,1
+CZ,1,1,6,66,863.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
+CZ,1,3,6,66,864.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
+CZ,1,5,6,66,865.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
+CZ,1,7,6,66,866.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
+CZ,1,9,6,66,867.5,10.0,2.8,Czech Republic,16.13,False,0.0,0.0,0.0,1
+DD,1,1,6,66,863.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
+DD,1,3,6,66,864.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
+DD,1,5,6,66,865.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
+DD,1,7,6,66,866.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
+DD,1,9,6,66,867.5,10.0,2.8,Germany,16.13,False,0.0,0.0,0.0,1
+DK,1,1,6,66,863.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
+DK,1,3,6,66,864.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
+DK,1,5,6,66,865.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
+DK,1,7,6,66,866.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
+DK,1,9,6,66,867.5,10.0,2.8,Denmark,16.13,False,0.0,0.0,0.0,1
+EE,1,1,6,66,863.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
+EE,1,3,6,66,864.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
+EE,1,5,6,66,865.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
+EE,1,7,6,66,866.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
+EE,1,9,6,66,867.5,10.0,2.8,Estonia,16.13,False,0.0,0.0,0.0,1
+ES,1,1,6,66,863.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
+ES,1,3,6,66,864.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
+ES,1,5,6,66,865.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
+ES,1,7,6,66,866.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
+ES,1,9,6,66,867.5,10.0,2.8,Spain,16.13,False,0.0,0.0,0.0,1
+EU,1,1,6,66,863.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
+EU,1,3,6,66,864.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
+EU,1,5,6,66,865.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
+EU,1,7,6,66,866.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
+EU,1,9,6,66,867.5,10.0,2.8,EU,16.13,False,0.0,0.0,0.0,1
+FI,1,1,6,66,863.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
+FI,1,3,6,66,864.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
+FI,1,5,6,66,865.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
+FI,1,7,6,66,866.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
+FI,1,9,6,66,867.5,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
+FI,1,33,30,77,917.9,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
+FI,1,35,30,77,918.9,10.0,2.8,Finland,16.13,False,0.0,0.0,0.0,1
+FL,1,1,6,66,863.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
+FL,1,3,6,66,864.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
+FL,1,5,6,66,865.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
+FL,1,7,6,66,866.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
+FL,1,9,6,66,867.5,10.0,2.8,Liechtenstein,16.13,False,0.0,0.0,0.0,1
+FR,1,1,6,66,863.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
+FR,1,3,6,66,864.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
+FR,1,5,6,66,865.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
+FR,1,7,6,66,866.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
+FR,1,9,6,66,867.5,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
+FR,1,33,30,77,917.9,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
+FR,1,35,30,77,918.9,10.0,2.8,France,16.13,False,0.0,0.0,0.0,1
+GR,1,1,6,66,863.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
+GR,1,3,6,66,864.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
+GR,1,5,6,66,865.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
+GR,1,7,6,66,866.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
+GR,1,9,6,66,867.5,10.0,2.8,Greece,16.13,False,0.0,0.0,0.0,1
+HR,1,1,6,66,863.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
+HR,1,3,6,66,864.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
+HR,1,5,6,66,865.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
+HR,1,7,6,66,866.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
+HR,1,9,6,66,867.5,10.0,2.8,Croatia,16.13,False,0.0,0.0,0.0,1
+HU,1,1,6,66,863.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
+HU,1,3,6,66,864.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
+HU,1,5,6,66,865.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
+HU,1,7,6,66,866.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
+HU,1,9,6,66,867.5,10.0,2.8,Hungary,16.13,False,0.0,0.0,0.0,1
+IE,1,1,6,66,863.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IE,1,3,6,66,864.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IE,1,5,6,66,865.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IE,1,7,6,66,866.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IE,1,9,6,66,867.5,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IE,1,31,30,77,916.9,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IE,1,33,30,77,917.9,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IE,1,35,30,77,918.9,10.0,2.8,Ireland,16.13,False,0.0,0.0,0.0,1
+IN,1,5,6,66,865.5,10.0,2.8,India,16.13,False,0.0,0.0,0.0,1
+IN,1,7,6,66,866.5,10.0,2.8,India,16.13,False,0.0,0.0,0.0,1
+IN,1,9,6,66,867.5,10.0,2.8,India,16.13,False,0.0,0.0,0.0,1
+IS,1,1,6,66,863.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IS,1,3,6,66,864.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IS,1,5,6,66,865.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IS,1,7,6,66,866.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IS,1,9,6,66,867.5,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IS,1,31,30,77,916.9,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IS,1,33,30,77,917.9,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IS,1,35,30,77,918.9,10.0,2.8,Iceland,16.13,False,0.0,0.0,0.0,1
+IT,1,1,6,66,863.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
+IT,1,3,6,66,864.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
+IT,1,5,6,66,865.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
+IT,1,7,6,66,866.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
+IT,1,9,6,66,867.5,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
+IT,1,33,30,77,917.9,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
+IT,1,35,30,77,918.9,10.0,2.8,Italy,16.13,False,0.0,0.0,0.0,1
+JP,1,9,8,73,921.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,1,13,8,73,923.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,1,15,8,73,924.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,1,17,8,73,925.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,1,19,8,73,926.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,1,21,8,73,927.0,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,2,2,9,64,923.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,2,4,10,64,924.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,2,6,9,64,925.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,2,8,10,64,926.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,4,36,11,65,924.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+JP,4,38,12,65,925.5,10.0,10.0,Japan,16.0,True,2.0,2.0,100.0,1
+KE,1,1,6,66,863.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
+KE,1,3,6,66,864.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
+KE,1,5,6,66,865.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
+KE,1,7,6,66,866.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
+KE,1,9,6,66,867.5,10.0,2.8,Kenya,16.13,False,0.0,0.0,0.0,1
+KR,1,1,14,74,918.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
+KR,1,3,14,74,919.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
+KR,1,5,14,74,920.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
+KR,1,7,14,74,921.0,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
+KR,1,9,14,74,922.0,100.0,100.0,South Korea,10.0,False,50.0,0.0,4000.0,1
+KR,1,11,14,74,923.0,100.0,100.0,South Korea,10.0,False,50.0,0.0,4000.0,1
+KR,2,2,15,75,918.5,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
+KR,2,6,15,75,920.5,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
+KR,2,10,15,75,922.5,100.0,100.0,South Korea,10.0,False,50.0,0.0,4000.0,1
+KR,4,8,16,76,921.5,100.0,100.0,South Korea,4.77,False,50.0,0.0,4000.0,1
+KR,1,18,14,74,926.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
+KR,1,20,14,74,927.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
+KR,1,22,14,74,928.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
+KR,1,24,14,74,929.5,100.0,100.0,South Korea,17.0,False,0.264,0.0,220.0,0
+KR,2,19,15,75,927.0,100.0,100.0,South Korea,20.0,False,0.264,0.0,220.0,0
+KR,2,23,15,75,929.0,100.0,100.0,South Korea,20.0,False,0.264,0.0,220.0,0
+LT,1,1,6,66,863.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LT,1,3,6,66,864.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LT,1,5,6,66,865.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LT,1,7,6,66,866.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LT,1,9,6,66,867.5,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LT,1,31,30,77,916.9,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LT,1,33,30,77,917.9,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LT,1,35,30,77,918.9,10.0,2.8,Lithuania,16.13,False,0.0,0.0,0.0,1
+LU,1,1,6,66,863.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
+LU,1,3,6,66,864.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
+LU,1,5,6,66,865.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
+LU,1,7,6,66,866.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
+LU,1,9,6,66,867.5,10.0,2.8,Luxembourg,16.13,False,0.0,0.0,0.0,1
+LV,1,1,6,66,863.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
+LV,1,3,6,66,864.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
+LV,1,5,6,66,865.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
+LV,1,7,6,66,866.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
+LV,1,9,6,66,867.5,10.0,2.8,Latvia,16.13,False,0.0,0.0,0.0,1
+MD,1,1,6,66,863.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MD,1,3,6,66,864.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MD,1,5,6,66,865.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MD,1,7,6,66,866.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MD,1,9,6,66,867.5,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MD,1,31,30,77,916.9,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MD,1,33,30,77,917.9,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MD,1,35,30,77,918.9,10.0,2.8,Moldova,16.13,False,0.0,0.0,0.0,1
+MK,1,1,6,66,863.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MK,1,3,6,66,864.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MK,1,5,6,66,865.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MK,1,7,6,66,866.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MK,1,9,6,66,867.5,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MK,1,31,30,77,916.9,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MK,1,33,30,77,917.9,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MK,1,35,30,77,918.9,10.0,2.8,North Macedonia,16.13,False,0.0,0.0,0.0,1
+MT,1,1,6,66,863.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
+MT,1,3,6,66,864.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
+MT,1,5,6,66,865.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
+MT,1,7,6,66,866.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
+MT,1,9,6,66,867.5,10.0,2.8,Malta,16.13,False,0.0,0.0,0.0,1
+NL,1,1,6,66,863.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
+NL,1,3,6,66,864.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
+NL,1,5,6,66,865.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
+NL,1,7,6,66,866.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
+NL,1,9,6,66,867.5,10.0,2.8,Netherlands,16.13,False,0.0,0.0,0.0,1
+NO,1,1,6,66,863.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
+NO,1,3,6,66,864.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
+NO,1,5,6,66,865.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
+NO,1,7,6,66,866.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
+NO,1,9,6,66,867.5,10.0,2.8,Norway,16.13,False,0.0,0.0,0.0,1
+NZ,1,27,26,68,915.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,1,29,26,68,916.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,1,31,26,68,917.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,1,33,26,68,918.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,1,35,26,68,919.5,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,1,37,26,68,920.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,1,39,26,68,921.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,1,41,26,68,922.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,1,43,26,68,923.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,1,45,26,68,924.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,1,47,26,68,925.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,1,49,26,68,926.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,1,51,26,68,927.5,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,2,30,27,69,917.0,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,2,34,27,69,919.0,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,2,38,27,69,921.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,2,42,27,69,923.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,2,46,27,69,925.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,2,50,27,69,927.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,4,32,28,70,918.0,100.0,100.0,New Zealand,30.0,False,0.0,0.0,0.0,1
+NZ,4,40,28,70,922.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,4,48,28,70,926.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+NZ,8,44,29,71,924.0,100.0,100.0,New Zealand,36.0,False,0.0,0.0,0.0,1
+PL,1,1,6,66,863.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
+PL,1,3,6,66,864.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
+PL,1,5,6,66,865.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
+PL,1,7,6,66,866.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
+PL,1,9,6,66,867.5,10.0,2.8,Poland,16.13,False,0.0,0.0,0.0,1
+PT,1,1,6,66,863.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+PT,1,3,6,66,864.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+PT,1,5,6,66,865.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+PT,1,7,6,66,866.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+PT,1,9,6,66,867.5,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+PT,1,31,30,77,916.9,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+PT,1,33,30,77,917.9,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+PT,1,35,30,77,918.9,10.0,2.8,Portugal,16.13,False,0.0,0.0,0.0,1
+RO,1,1,6,66,863.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
+RO,1,3,6,66,864.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
+RO,1,5,6,66,865.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
+RO,1,7,6,66,866.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
+RO,1,9,6,66,867.5,10.0,2.8,Romania,16.13,False,0.0,0.0,0.0,1
+SE,1,1,6,66,863.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SE,1,3,6,66,864.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SE,1,5,6,66,865.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SE,1,7,6,66,866.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SE,1,9,6,66,867.5,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SE,1,31,30,77,916.9,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SE,1,33,30,77,917.9,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SE,1,35,30,77,918.9,10.0,2.8,Sweden,16.13,False,0.0,0.0,0.0,1
+SG,1,7,17,66,866.5,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
+SG,1,9,17,66,867.5,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
+SG,1,11,17,66,868.5,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
+SG,2,10,19,67,868.0,2.77,2.77,Singapore,29.14,False,100.0,0.0,1000.0,1
+SG,1,37,18,68,920.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SG,1,39,18,68,921.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SG,1,41,18,68,922.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SG,1,43,18,68,923.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SG,1,45,18,68,924.5,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SG,2,38,20,69,921.0,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SG,2,42,20,69,923.0,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SG,4,40,21,70,922.0,100.0,100.0,Singapore,22.15,False,0.0,0.0,0.0,1
+SI,1,1,6,66,863.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SI,1,3,6,66,864.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SI,1,5,6,66,865.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SI,1,7,6,66,866.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SI,1,9,6,66,867.5,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SI,1,31,30,77,916.9,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SI,1,33,30,77,917.9,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SI,1,35,30,77,918.9,10.0,2.8,Slovenia,16.13,False,0.0,0.0,0.0,1
+SK,1,1,6,66,863.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
+SK,1,3,6,66,864.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
+SK,1,5,6,66,865.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
+SK,1,7,6,66,866.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
+SK,1,9,6,66,867.5,10.0,2.8,Slovakia,16.13,False,0.0,0.0,0.0,1
+TR,1,1,6,66,863.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
+TR,1,3,6,66,864.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
+TR,1,5,6,66,865.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
+TR,1,7,6,66,866.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
+TR,1,9,6,66,867.5,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
+TR,1,33,30,77,917.9,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
+TR,1,35,30,77,918.9,10.0,2.8,Turkey,16.13,False,0.0,0.0,0.0,1
+UK,1,1,6,66,863.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
+UK,1,3,6,66,864.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
+UK,1,5,6,66,865.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
+UK,1,7,6,66,866.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
+UK,1,9,6,66,867.5,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
+UK,1,33,30,77,917.9,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
+UK,1,35,30,77,918.9,10.0,2.8,United Kingdom,16.13,False,0.0,0.0,0.0,1
+US,1,1,1,68,902.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,0
+US,1,3,1,68,903.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,5,1,68,904.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,7,1,68,905.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,9,1,68,906.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,11,1,68,907.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,13,1,68,908.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,15,1,68,909.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,17,1,68,910.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,19,1,68,911.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,21,1,68,912.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,23,1,68,913.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,25,1,68,914.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,27,1,68,915.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,29,1,68,916.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,31,1,68,917.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,33,1,68,918.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,35,1,68,919.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,37,1,68,920.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,39,1,68,921.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,41,1,68,922.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,43,1,68,923.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,45,1,68,924.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,47,1,68,925.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,49,1,68,926.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,1,51,1,68,927.5,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,2,2,69,903.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,0
+US,2,6,2,69,905.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,10,2,69,907.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,14,2,69,909.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,18,2,69,911.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,22,2,69,913.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,26,2,69,915.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,30,2,69,917.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,34,2,69,919.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,38,2,69,921.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,42,2,69,923.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,46,2,69,925.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,2,50,2,69,927.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,4,8,3,70,906.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,4,16,3,70,910.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,4,24,3,70,914.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,4,32,3,70,918.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,4,40,3,70,922.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,4,48,3,70,926.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,8,12,4,71,908.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,8,28,4,71,916.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1
+US,8,44,4,71,924.0,100.0,100.0,USA,36.0,False,0.0,0.0,0.0,1

feeds/morse/morse-regdb/patches/001-add_column_usable_bannf_c.patch

@@ -0,0 +1,36 @@
+From 6c0733b125434b846bec2a744a812c890c82518d Mon Sep 17 00:00:00 2001
+From: Takura Mapani <takura.mapani@morsemicro.com>
+Date: Tue, 19 Sep 2023 03:25:45 +0000
+Subject: [PATCH] Merged in APP-1819_add_usable_by_bannf_column (pull request
+ #17)
+
+APP-1819 add a new column usable bannfC for the csv output
+
+* added new column usable bannfC for the csv output
+
+
+Approved-by: Arien Judge
+Approved-by: David Goodall
+Approved-by: Matthew Forgie
+Approved-by: Thomas Flynn
+Approved-by: Matt Jervis
+---
+ regdbconverter.py | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/regdbconverter.py b/regdbconverter.py
+index 883f281..4bd44b1 100755
+--- a/regdbconverter.py
++++ b/regdbconverter.py
+@@ -311,7 +311,7 @@ def _output_channels_python(channels, out_file, args):
+ 
+ def _output_channels_csv(channels, out_file, args):
+     fields = ['country_code', 'bw', 's1g_chan', 's1g_op_class', 'global_op_class', 'centre_freq_mhz', 'duty_cycle_ap', 'duty_cycle_sta',
+-              'country', 'tx_power_max', 'duty_cycle_omit_ctrl_resp', 'pkt_spacing_ms', 'airtime_min_ms', 'airtime_max_ms']
++              'country', 'tx_power_max', 'duty_cycle_omit_ctrl_resp', 'pkt_spacing_ms', 'airtime_min_ms', 'airtime_max_ms', 'usable_banff_c']
+ 
+     dw = DictWriter(out_file, fields, extrasaction='ignore', lineterminator='\n')
+     dw.writeheader()
+-- 
+2.25.1
+

feeds/morse/netifd-morse/Makefile

@@ -0,0 +1,41 @@
+#
+# Copyright 2022 Morse Micro
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=netifd-morse
+PKG_RELEASE=1
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=
+
+PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/netifd-morse
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Morse Micro HaLow support for netifd
+  DEPENDS:= netifd \
+	+@BUSYBOX_CONFIG_USLEEP +@BUSYBOX_CONFIG_BASE64 +@BUSYBOX_CONFIG_XXD \
+	+kmod-morse +kmod-cfg80211 \
+	+morse-regdb +wpa_event_listener +wpa_supplicant_s1g +hostapd_s1g +morsecli
+endef
+
+define Build/Compile
+endef
+
+define Package/netifd-morse/install
+	$(INSTALL_DIR) $(1)/lib/
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(CP) ./lib/* $(1)/lib/
+	$(INSTALL_BIN) ./etc/init.d/halow-gpio-reset $(1)/etc/init.d/
+endef
+
+$(eval $(call BuildPackage,netifd-morse))

feeds/morse/netifd-morse/etc/init.d/halow-gpio-reset

@@ -0,0 +1,28 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=09
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+boot() {
+	. /lib/functions.sh
+	. /lib/functions/uci-defaults.sh
+	. /lib/functions/system.sh
+
+	board=$(board_name)
+
+	case "$board" in
+	edgecore,eap112)
+   
+		echo 486 > /sys/class/gpio/export
+		echo "out" > /sys/class/gpio/gpio486/direction
+		echo 0 > /sys/class/gpio/gpio486/value
+		sleep 1
+		echo "in" > /sys/class/gpio/gpio486/direction
+		echo 486 > /sys/class/gpio/unexport    
+
+	esac
+}

feeds/morse/netifd-morse/lib/netifd/morse/morse_utils.sh

@@ -0,0 +1,161 @@
+kill_wait()
+{
+	local names=$*
+	local count=30
+
+	for pid in $(pidof $names)
+	do
+		kill $pid &> /dev/null
+	done
+
+	while pidof $names &> /dev/null;
+	do
+		usleep 100000
+		let "count--"
+		if [ $count -eq 0 ]
+		then
+			echo "$names failed to terminate normally, force quitting" >&2
+			kill -9 $(pidof $names)
+			return 1
+		fi
+	done
+	return 0
+}
+
+_list_phy_interfaces() {
+	local phy="$1"
+	if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
+		ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
+	else
+		ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
+	fi
+}
+
+list_phy_interfaces() {
+	local phy="$1"
+
+	for dev in $(_list_phy_interfaces "$phy"); do
+		readlink "/sys/class/net/${dev}/phy80211" | grep -q "/${phy}\$" || continue
+	done
+}
+
+num_test()
+{
+	case $1 in
+		''|*[!0-9]*)
+			return 1
+			;;
+		*)
+			;;
+	esac
+	return 0
+}
+
+_get_regulatory() {
+	local _mode=$1
+	local _country=$2
+	local _channel=$3
+	local _op_class=$4
+
+	local dc_min="0.01"
+	local dc_max="100.00"
+	local cc; local bw; local l_op; local g_op;
+	local freq; local dc_ap; local dc_sta;
+
+	oIFS=$IFS
+	HEADER=1
+	while IFS=, read -r cc bw ch l_op g_op freq remainder; do
+		if [ $HEADER = 1 ]; then
+			HEADER=0
+			continue
+		fi
+		num_test $bw
+		[ $? -eq 1 ] 		&& continue
+		num_test $ch
+		[ $? -eq 1 ] 		&& continue
+		num_test $l_op
+		[ $? -eq 1 ] 		&& continue
+		num_test $g_op
+		[ $? -eq 1 ] 		&& continue
+
+		if [ "$cc" == "$_country" ] && [ "$ch" -eq "$_channel" ]; then
+			if [ -z "$_op_class" ]; then
+				halow_bw=$bw
+				center_freq=$freq
+				# If you didn't pass op_class, set it from this data.
+				op_class="$g_op"
+				IFS=$oIFS
+				return 0;
+			elif [ "$l_op" -eq "$_op_class" ] || [ "$g_op" -eq "$_op_class" ]; then
+				halow_bw=$bw
+				center_freq=$freq
+				IFS=$oIFS
+				return 0;
+			fi
+		fi
+	done < /usr/share/morse-regdb/channels.csv
+
+	IFS=$oIFS
+	return 1;
+}
+
+
+morse_find_ifname()
+{
+	for file in "/sys/class/net/wlan"*;
+	do
+		if [ -d "$file"/device/morse ]
+		then
+			ifname=$(basename $file)
+			break
+		fi
+	done
+}
+
+# this function checks if an macaddr is burnt into the device.
+# if so, returns it, otherwise returns an empty string
+morse_get_chip_macaddr()
+{
+	ifname=
+	morse_find_ifname
+	local state=$(cat /sys/class/net/${ifname}/operstate 2>/dev/null)
+	[ $? -ne 0 ] && return
+
+	if [ "$state" == "down" ]; then
+		ip link set ${ifname} up
+		[ $? -ne 0 ] && return
+	fi
+
+	local chip_macaddr="$(morse_cli -i ${ifname} macaddr 2>/dev/null)"
+	[ $? -ne 0 ] && printf ""
+	chip_macaddr=${chip_macaddr##"Chip MAC address: "}
+
+	#make sure (using regex) that the we got a macaddr
+	if [[ "$chip_macaddr" =~ ^\([0-9A-Fa-f]{2}[:]\){5}\([0-9A-Fa-f]{2}\)$ ]]; then
+		[ "$chip_macaddr" = "00:00:00:00:00:00" ] && printf "" || printf "$chip_macaddr"
+	else
+		printf ""
+	fi
+
+	if [ "$state" == "down" ]; then
+		ip link set ${ifname} down
+	fi
+}
+
+update_dpp_qrcode()
+{
+	local uci_changes_path="$(mktemp -d)"
+	local private_key_path=$1
+	#remove ':' from the macaddress
+	local mac_address=$(echo "$2" | sed -r 's/://g')
+	#generate the public key string from the private key.
+	#unfortunately, there is no way to quiet the 'read EC key' messages without redirecting stderr.
+	local pubkey=$(openssl ec -in $private_key_path -pubout -conv_form compressed -outform DER 2> /dev/null | hexdump -e '16/1 "%02x " "\n"' | xxd -r -p | base64 -w0)
+	#save qrcode string into /www
+	qrencode --inline --8bit --type=SVG --output=/tmp/dpp_qrcode.svg "DPP:V:2;M:$mac_address;K:$pubkey;;"
+	#only write if necessary
+	if ! cmp -s /tmp/dpp_qrcode.svg /www/dpp_qrcode.svg; then
+		cp /tmp/dpp_qrcode.svg /www/dpp_qrcode.svg
+	fi
+	rm /tmp/dpp_qrcode.svg
+}

feeds/morse/netifd-morse/lib/netifd/morse/wpa_s1g_dpp_action.sh

@@ -0,0 +1,111 @@
+#!/bin/sh
+
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+. /lib/netifd/netifd-wireless.sh
+. /etc/diag.sh
+
+#returns 0 if config is complete
+is_config_complete()
+{
+    [ -z "$encryption" ] && return 1
+
+    #if encryption is sae, check if we have psk
+    if [ "$encryption" = "sae" ]; then
+        [ -z "$psk" ] && return 1
+    fi
+
+    #check if we have ssid
+    [ -z "$ssid" ] && return 1
+
+    return 0
+}
+
+get_uci_section()
+{
+    local target_iface=$1
+    local dpp_wifi_iface=
+
+    check_interface() {
+        json_get_vars section ifname
+        [ "$ifname" = "$target_iface" ] && [ -n "$section" ] && [ -z "$dpp_wifi_iface" ] && dpp_wifi_iface=$section
+    }
+
+    wireless_status=$(ubus call network.wireless status)
+
+    json_init
+    json_load "$wireless_status"
+    json_get_keys radios
+
+    for radio in $radios; do
+        json_select $radio
+        for_each_interface "sta" check_interface
+        json_select ..
+    done
+    echo "$dpp_wifi_iface"
+}
+
+save_and_reload()
+{
+    logger "Saving Received AP Credentials."
+    local uci_section=$(get_uci_section $iface_name)
+    if [ -z "$uci_section" ]; then
+        logger "FATAL: unable to find the correct wifi interface in configs."
+        exit 0
+    fi
+
+    uci set wireless.$uci_section.encryption="$encryption"
+
+    #if encryption is sae, check if we have psk
+    if [ "$encryption" = "sae" ]; then
+        uci set wireless.$uci_section.key="$psk"
+    fi
+
+    uci set wireless.$uci_section.ssid="$ssid"
+
+    uci set wireless.$uci_section.dpp='0'
+
+    uci commit
+    ubus call service event "{ \"type\": \"config.change\", \"data\": { \"package\": \"wireless\" }}"
+}
+
+# Do not name 'config'; will clash with uci functions.
+do_config() {
+    # convert password from hex string to string.
+    psk="$(echo "$psk" | xxd -r -p)"
+
+    # if the file contains all the necessary stuff, then save and reload.
+    is_config_complete && save_and_reload
+}
+
+failed() {
+    set_state dpp_failed
+}
+
+finished() {
+    set_state done
+}
+
+started() {
+    set_state dpp_started
+}
+
+case "$1" in
+    config)
+        do_config
+    ;;
+    failed)
+        failed
+    ;;
+    finished)
+        finished
+    ;;
+    started)
+        started
+    ;;
+    *)
+        echo "Usage: $0 {config|failed|finished|started}"
+        exit 1
+    ;;
+esac

feeds/morse/netifd-morse/lib/wifi/morse.sh

@@ -0,0 +1,139 @@
+#!/bin/sh
+
+# This script is copied and modified from
+# package/kernel/mac80211/files/lib/wifi/mac80211.sh
+# and modified (simplified) to work with morse devices.
+
+append DRIVERS "morse"
+
+# Find and set $phy for this $device (a wifi-device section name)
+lookup_phy() {
+	[ -n "$phy" ] && {
+		[ -d /sys/class/ieee80211/$phy ] && return
+	}
+
+	local devpath
+	config_get devpath "$device" path
+	[ -n "$devpath" ] && {
+		phy="$(iwinfo dot11ah phyname "path=$devpath")"
+		[ -n "$phy" ] && return
+	}
+
+	local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
+	[ -n "$macaddr" ] && {
+		for _phy in /sys/class/ieee80211/*; do
+			[ -e "$_phy" ] || continue
+
+			[ "$macaddr" = "$(cat ${_phy}/macaddress)" ] || continue
+			phy="${_phy##*/}"
+			return
+		done
+	}
+	phy=
+	return
+}
+
+# Find and save the phy and macaddr for this $device (a wifi-device section name)
+find_morse_phy() {
+	local device="$1"
+
+	config_get phy "$device" phy
+	lookup_phy
+	[ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
+		echo "PHY for wifi device $1 not found"
+		return 1
+	}
+	config_set "$device" phy "$phy"
+
+	config_get macaddr "$device" macaddr
+	[ -z "$macaddr" ] && {
+		config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
+	}
+
+	return 0
+}
+
+# Set found=1 if the $phy for this $device (a wifi-device section name) is the same as $dev
+check_morse_device() {
+	config_get phy "$1" phy
+	[ -z "$phy" ] && {
+		find_morse_phy "$1" >/dev/null || return 0
+		config_get phy "$1" phy
+	}
+	[ "$phy" = "$dev" ] && found=1
+}
+
+detect_morse() {
+	devidx=0
+	config_load wireless
+	while :; do
+		config_get type "radio$devidx" type
+		[ -n "$type" ] || break
+		devidx=$(($devidx + 1))
+	done
+
+	for _dev in /sys/class/ieee80211/*; do
+		[ -e "$_dev" ] || continue
+
+		# Only configure morse devices.
+		basename "$(readlink -f "$_dev/device/driver/")" | grep '^morse_' || continue
+
+		dev="${_dev##*/}"
+
+		# Skip already configured devices.
+		# The path or macaddr are used to find the corresponding phy.
+		found=0
+		config_foreach check_morse_device wifi-device
+		[ "$found" -gt 0 ] && continue
+
+		path="$(iwinfo dot11ah path "$dev")"
+		if [ -n "$path" ]; then
+			dev_id="set wireless.radio${devidx}.path='$path'"
+		else
+			dev_id="set wireless.radio${devidx}.macaddr=$(cat /sys/class/ieee80211/${dev}/macaddress)"
+		fi
+
+		uci -q batch <<-EOF
+			set wireless.radio${devidx}=wifi-device
+			set wireless.radio${devidx}.type=morse
+			${dev_id}
+			set wireless.radio${devidx}.band=s1g
+			set wireless.radio${devidx}.hwmode=11ah
+			set wireless.radio${devidx}.reconf=0
+			set wireless.radio${devidx}.disabled=1
+
+			set wireless.default_radio${devidx}=wifi-iface
+			set wireless.default_radio${devidx}.mode=ap
+			set wireless.default_radio${devidx}.wds=1
+			set wireless.default_radio${devidx}.device=radio${devidx}
+			set wireless.default_radio${devidx}.network=lan
+			set wireless.default_radio${devidx}.ssid=MorseMicro
+			set wireless.default_radio${devidx}.encryption=sae
+			set wireless.default_radio${devidx}.key=12345678
+EOF
+
+		board=$(board_name)
+
+		case "$board" in
+			morse,ekh01-03 |\
+			morse,ekh03v3)
+				bcf=bcf_mf08551.bin
+			;;
+			morse,ekh01v1)
+				bcf=bcf_mf03120.bin
+			;;
+			morse,ekh01v2)
+				bcf=bcf_mf08251.bin
+			;;
+			morse,ekh04v4)
+				bcf=bcf_ekh04_v4.bin
+			;;
+		esac
+
+		[ -n "${bcf}" ] && uci -q set wireless.radio${devidx}.bcf="${bcf}"
+
+		uci -q commit wireless
+
+		devidx=$(($devidx + 1))
+	done
+}

feeds/morse/utils/hostapd_s1g/Config.in

@@ -0,0 +1,17 @@
+if PACKAGE_hostapd_s1g
+
+	config MORSE_HOSTAPD_S1G_EAP
+		bool
+		default n
+		prompt "Enable Extensible Authentication Protocol (EAP) support"
+
+	config MORSE_HOSTAPD_S1G_ACS
+		bool
+		default n
+		prompt "Enable automatic channel selection (ACS) support"
+		help
+			This will allow hostapd to pick the channel automatically when channel is set
+			to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+			similar way.
+
+endif

feeds/morse/utils/hostapd_s1g/Makefile

@@ -0,0 +1,167 @@
+#
+# Copyright 2022 Morse Micro
+#
+# This is free software, licensed under the 3-Clause BSD License.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=hostapd_s1g
+PKG_RELEASE=2
+
+PKG_VERSION:=1.12.4
+
+PKG_LICENSE:=BSD-3-Clause
+
+PKG_SOURCE_VERSION:=$(PKG_VERSION)
+PKG_SOURCE_URL:=https://github.com/MorseMicro/hostap.git
+PKG_HASH:=a2f17ce3d2fe25d45cc2d6869e9ea644bcac441ec9b541972034768d4fc63608
+PKG_SOURCE_PROTO:=git
+
+PKG_MAINTAINER:=Morse Micro <info@morsemicro.com>
+PKG_BUILD_PARALLEL:=1
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_PACKAGE_kmod-morse \
+	CONFIG_PACKAGE_kmod-cfg80211 \
+	CONFIG_PACKAGE_hostapd \
+	CONFIG_PACKAGE_hostapd-basic \
+	CONFIG_PACKAGE_hostapd-mini \
+	CONFIG_WPA_RFKILL_SUPPORT \
+	CONFIG_DRIVER_WEXT_SUPPORT \
+	CONFIG_DRIVER_11N_SUPPORT \
+	CONFIG_DRIVER_11AC_SUPPORT \
+	CONFIG_DRIVER_11AX_SUPPORT \
+	CONFIG_WPA_ENABLE_WEP
+
+include $(INCLUDE_DIR)/package.mk
+
+MAKE_FLAGS += \
+	MORSEHOSTAPD_VERSION_STRING=$(PKG_VERSION)
+
+MMHOSTAPD_CONFIG_ENABLE = \
+	CONFIG_INTERNAL_LIBTOMMATH \
+	CONFIG_DEBUG_FILE \
+	CONFIG_DEBUG_SYSLOG \
+	CONFIG_PMKSA_CACHE_EXTERNAL \
+	CONFIG_SAE \
+	CONFIG_TESTING_OPTIONS \
+	CONFIG_WNM \
+	CONFIG_DRIVER_ACS \
+	CONFIG_DRIVER_HOSTAP \
+	CONFIG_DRIVER_NL80211 \
+	CONFIG_HS20 \
+	CONFIG_IEEE80211AC \
+	CONFIG_IEEE80211N \
+	CONFIG_IEEE80211AH \
+	CONFIG_IEEE80211R \
+	CONFIG_INTERWORKING \
+	CONFIG_FULL_DYNAMIC_VLAN \
+	CONFIG_VLAN_NETLINK \
+	CONFIG_OWE \
+	CONFIG_LIBNL32 \
+	CONFIG_DPP \
+	CONFIG_DPP2 \
+	CONFIG_WPS
+
+MMHOSTAPD_CONFIG_SET = \
+	NEED_LINUX_IOCTL \
+	CONFIG_DPP \
+	CONFIG_SAE
+
+MMHOSTAPD_CONFIG_DISABLE = \
+    CONFIG_DRIVER_NONE \
+	CONFIG_DRIVER_RTW \
+	CONFIG_DRIVER_WIRED
+
+MMHOSTAPD_CONFIG_EDITS += 's/\#\(CONFIG_TLS=openssl\)/\1/'
+
+ifeq ($(CONFIG_MORSE_HOSTAPD_S1G_ACS),y)
+	MMHOSTAPD_CONFIG_ENABLE += CONFIG_ACS
+endif
+
+ifeq ($(CONFIG_MORSE_HOSTAPD_S1G_EAP),y)
+	MMHOSTAPD_CONFIG_ENABLE += \
+		CONFIG_EAP \
+		CONFIG_RADIUS_SERVER \
+		CONFIG_TLSV1
+else
+	MMHOSTAPD_CONFIG_DISABLE += CONFIG_HOSTAPD_EAP
+	MMHOSTAPD_CONFIG_ENABLE += \
+		CONFIG_NO_ACCOUNTING \
+		CONFIG_NO_RADIUS
+endif
+
+define Package/hostapd_s1g
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=WirelessAPD
+  TITLE:=Morse Micro HaLow hostapd
+  DEPENDS:= +kmod-morse +libnl +libopenssl +libubus
+  USERID:=network=101:network=101
+  PROVIDES:=hostapd_s1g
+endef
+
+define Package/hostapd_s1g/description
+ This package contains a full featured Morse Micro patched
+ Authenticator.
+endef
+
+define Package/hostapd_s1g/config
+    source "$(SOURCE)/Config.in"
+endef
+
+MMHOSTAPD_CONFIG = $(PKG_BUILD_DIR)/hostapd/.config
+
+define Build/Prepare
+    $(call Build/Prepare/Default)
+	$(CP) $(PKG_BUILD_DIR)/hostapd/defconfig $(MMHOSTAPD_CONFIG)
+	sed -i $(patsubst %,-e 's/^#\(%\)/\1/',$(MMHOSTAPD_CONFIG_ENABLE)) \
+		$(patsubst %,-e 's/^\(%\)/#\1/',$(MMHOSTAPD_CONFIG_DISABLE)) \
+		$(patsubst %,-e '1i%=y',$(MMHOSTAPD_CONFIG_SET)) \
+		$(patsubst %,-e %,$(MMHOSTAPD_CONFIG_EDITS)) \
+		$(MMHOSTAPD_CONFIG)
+endef
+
+TARGET_CPPFLAGS := \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-I$(PKG_BUILD_DIR)/src/crypto \
+	$(TARGET_CPPFLAGS) \
+	-DCONFIG_LIBNL20 \
+	-D_GNU_SOURCE
+
+TARGET_LDFLAGS += -lnl-3 -lnl-genl-3 -lnl-route-3
+TARGET_LDFLAGS += -lm -lpthread -lcrypto -lssl
+
+TARGET_LDFLAGS += -lrt
+TARGET_LDFLAGS_C += -lrt
+
+define Build/RunMake
+	CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
+	$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
+		$(TARGET_CONFIGURE_OPTS) \
+		$(DRIVER_MAKEOPTS) \
+		LIBS="$(TARGET_LDFLAGS)" \
+		LIBS_c="$(TARGET_LDFLAGS_C)" \
+		AR="$(TARGET_CROSS)gcc-ar" \
+		BCHECK= \
+		$(2)
+endef
+
+define Build/Compile
+	+$(call Build/RunMake,hostapd, \
+		hostapd_s1g hostapd_cli_s1g \
+	)
+endef
+
+#Ian
+define Package/hostapd_s1g/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_s1g $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli_s1g $(1)/sbin
+	$(INSTALL_DIR) $(1)/lib/netifd
+	$(INSTALL_DATA) ./files/lib/netifd/hostapd_s1g.sh $(1)/lib/netifd 
+endef
+
+$(eval $(call BuildPackage,hostapd_s1g))

feeds/morse/utils/hostapd_s1g/patches/0001-APP-2573-Emit-a-DPP-PB_STATUS-event-when-push-button.patch

@@ -0,0 +1,45 @@
+From 5433351ed5ab62c2d4fbd15a2c4d8c4aeacb93dc Mon Sep 17 00:00:00 2001
+From: Evan Benn <evan.benn@morsemicro.com>
+Date: Thu, 29 Feb 2024 11:09:38 +1100
+Subject: [PATCH] APP-2573: Emit a DPP PB_STATUS event when push button starts
+
+---
+ src/ap/dpp_hostapd.c            | 1 +
+ wpa_supplicant/dpp_supplicant.c | 2 ++
+ 2 files changed, 3 insertions(+)
+
+diff --git a/src/ap/dpp_hostapd.c b/src/ap/dpp_hostapd.c
+index b7cca47c714b..3025eef204d2 100644
+--- a/src/ap/dpp_hostapd.c
++++ b/src/ap/dpp_hostapd.c
+@@ -3960,6 +3960,7 @@ int hostapd_dpp_push_button(struct hostapd_data *hapd, const char *cmd)
+ 	eloop_register_timeout(100, 0, hostapd_dpp_push_button_expire,
+ 			       hapd, NULL);
+ 
++	wpa_msg(hapd->msg_ctx, MSG_INFO, DPP_EVENT_PB_STATUS "started");
+ 	return 0;
+ }
+ 
+diff --git a/wpa_supplicant/dpp_supplicant.c b/wpa_supplicant/dpp_supplicant.c
+index ab06ff8d32c1..24e4bb3c444d 100644
+--- a/wpa_supplicant/dpp_supplicant.c
++++ b/wpa_supplicant/dpp_supplicant.c
+@@ -5676,6 +5676,7 @@ static int wpas_dpp_push_button_configurator(struct wpa_supplicant *wpa_s,
+ 	eloop_register_timeout(100, 0, wpas_dpp_push_button_expire,
+ 			       wpa_s, NULL);
+ 
++	wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_PB_STATUS "started");
+ 	return 0;
+ }
+ 
+@@ -5749,6 +5750,7 @@ int wpas_dpp_push_button(struct wpa_supplicant *wpa_s, const char *cmd)
+ 	wpa_supplicant_req_scan(wpa_s, 0, 0);
+ 
+ 	res = 0;
++	wpa_msg(wpa_s, MSG_INFO, DPP_EVENT_PB_STATUS "started");
+ out:
+ 
+ 	/* If push button mode failed to start, restart the chirp forever timer */
+-- 
+2.42.0.530.g692be87cbba5
+

feeds/morse/utils/hostapd_s1g/patches/0002-SW-11943-dpp-does-not-associate-in-us-regd.patch

@@ -0,0 +1,90 @@
+From 25631fa387af430b8d7f03302218c66dc161cc6f Mon Sep 17 00:00:00 2001
+From: Andrew Pope <andrew.pope@morsemicro.com>
+Date: Tue, 4 Jun 2024 23:12:37 +0000
+Subject: [PATCH] Merged in SW-11943-dpp-does-not-associate-in-us-regdom (pull
+ request #213)
+
+SW-11943: DPP does not associate in US regdom
+
+Two problems contributed to the originally reported issue:
+
+1. The DPP-PB state machine function will unconditionally cancel any pending off-channel actions - even if the DPP PB discovery phase is over. To fix this, avoid unconditionally completing offchannel actions from DPP-PB state machine function if DPP PB discovery phase is over.
+
+2. Logic around PKEX retries will manually attempt to complete the exchange on adjacent non-S1G channels. These retries inevitably fail, leading to a quicker collapse of the PKEX exchange attempts and eventual downgrade from v2 to v1 (bad). To fix this, remove non-S1G frequency hopping logic from DPP PB discovery and PKEX exchange phases.
+
+Approved-by: Neville Young
+Approved-by: Simon Wadsworth
+Approved-by: Ayman Grais
+Approved-by: James Herbert
+---
+ src/ap/dpp_hostapd.c            |  6 ++++++
+ wpa_supplicant/dpp_supplicant.c | 17 +++++++++++++++--
+ 2 files changed, 21 insertions(+), 2 deletions(-)
+
+diff --git a/src/ap/dpp_hostapd.c b/src/ap/dpp_hostapd.c
+index b7cca47c7..282581fe5 100644
+--- a/src/ap/dpp_hostapd.c
++++ b/src/ap/dpp_hostapd.c
+@@ -260,6 +260,12 @@ static int hostapd_dpp_allow_ir(struct hostapd_data *hapd, unsigned int freq)
+ static int hostapd_dpp_pkex_next_channel(struct hostapd_data *hapd,
+ 					 struct dpp_pkex *pkex)
+ {
++	/* Following logic is not S1G compatible. Attempting PKEX on non-adjacent S1G channels
++	 * results in guaranteed failure.
++	 */
++	if (hapd->iconf->ieee80211ah)
++		return -1;
++
+ 	if (pkex->freq == 2437)
+ 		pkex->freq = 5745;
+ 	else if (pkex->freq == 5745)
+diff --git a/wpa_supplicant/dpp_supplicant.c b/wpa_supplicant/dpp_supplicant.c
+index ab06ff8d3..e90e4a163 100644
+--- a/wpa_supplicant/dpp_supplicant.c
++++ b/wpa_supplicant/dpp_supplicant.c
+@@ -2840,6 +2840,12 @@ static int wpas_dpp_allow_ir(struct wpa_supplicant *wpa_s, unsigned int freq)
+ static int wpas_dpp_pkex_next_channel(struct wpa_supplicant *wpa_s,
+ 				      struct dpp_pkex *pkex)
+ {
++#if defined(CONFIG_IEEE80211AH)
++	/* Following logic is not S1G compatible. Attempting PKEX on non-adjacent S1G channels
++	 * results in guaranteed failure.
++	 */
++	return -1;
++#endif
+ 	if (pkex->freq == 2437)
+ 		pkex->freq = 5745;
+ 	else if (pkex->freq == 5745)
+@@ -5113,10 +5119,16 @@ static int * wpas_dpp_presence_ann_channels(struct wpa_supplicant *wpa_s,
+ 
+ 			if (chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_RADAR))
+ 				continue;
++#if defined(CONFIG_IEEE80211AH)
++			/* Adding channels 44 and 149 at end of scan list is not required
++			 * for HaLow
++			 */
++#else
+ 			if (chan->freq == 5220)
+ 				chan44 = 1;
+ 			if (chan->freq == 5745)
+ 				chan149 = 1;
++#endif
+ 
+ 			/* Morse - All 5GHz channels that are mapped to 1 MHz and 2 MHz.
+ 			 * Channels that aren't relevant to a regulatory domain will be
+@@ -5573,9 +5585,10 @@ static void wpas_dpp_pb_next(void *eloop_ctx, void *timeout_ctx)
+ 	if (!wpa_s->dpp_pb_freqs)
+ 		return;
+ 
+-	os_get_reltime(&now);
+-	offchannel_send_action_done(wpa_s);
++	if (!wpa_s->dpp_pb_discovery_done)
++		offchannel_send_action_done(wpa_s);
+ 
++	os_get_reltime(&now);
+ 	if (os_reltime_expired(&now, &wpa_s->dpp_pb_time, 100)) {
+ 		wpa_printf(MSG_DEBUG, "DPP: Push button wait time expired");
+ 		wpas_dpp_push_button_stop(wpa_s);
+-- 
+2.25.1
+