ipq807x: add EMPLUS WAP380C support

Signed-off-by: Jesse Wu <Jesse.Wu@emplustech.com>

.github/workflows/build-dev.yml

@@ -15,21 +15,20 @@ on:
 
 jobs:
   build:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     outputs:
       x64_vm_image_name: ${{ steps.package_and_upload_image.outputs.x64_vm_image_name }}
     strategy:
       fail-fast: false
       matrix:
-        target: [ 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf196', 'cig_wf189', 'cig_wf660a', 'cybertan_eww622-a1', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap111', 'edgecore_ecw5211', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap102', 'hfcl_ion4','hfcl_ion4xi_wp', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4xi_w', 'hfcl_ion4xi_HMR', 'hfcl_ion4x_w', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'sercomm_ap72tip', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018-v4', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655' ]
-
+        target: [ 'cig_wf189h', 'cig_wf189w', 'cig_wf660a', 'cig_wf672', 'cig_wf186h', 'cig_wf186w', 'cig_wf188n', 'cig_wf189', 'cig_wf196', 'cig_wf196', 'cybertan_eww631-a1', 'cybertan_eww631-b1', 'sonicfi_rap630w-312g', 'sonicfi_rap63xc-211g', 'sonicfi_rap630c-311g', 'sonicfi_rap630w-311g', 'sonicfi_rap630w-211g', 'sonicfi_rap650c', 'sonicfi_rap7110c-341x', 'sonicfi_rap750e-h', 'sonicfi_rap750e-s', 'sonicfi_rap750w-311a', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_eap105', 'edgecore_eap111', 'edgecore_eap112', 'edgecore_oap101', 'edgecore_oap101-6e', 'edgecore_oap101e', 'edgecore_oap101e-6e', 'edgecore_oap103', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'hfcl_ion4x_3', 'hfcl_ion4xi_w', 'hfcl_ion4x_w', 'indio_um-305ax', 'senao_iap4300m', 'senao_iap2300m', 'senao_jeap6500', 'udaya_a6-id2', 'udaya_a6-od2', 'yuncore_ax820', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650', 'yuncore_fap655', 'emplus_wap588m', 'zyxel_nwa130be', 'sercomm_ap72tip-v4' ]
     steps:
     - uses: actions/checkout@v3
 
     # Clean unnecessary files to save disk space
     - name: clean unncessary files to save space
       run: |
-        docker rmi `docker images -q`
+        docker rmi `docker images -q` || true
 
     - name: Build image for ${{ matrix.target }}
       id: build
@@ -81,7 +80,7 @@ jobs:
         fi
 
   trigger-testing:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build
     if: startsWith(github.ref, 'refs/tags/v')
     steps:
@@ -94,7 +93,7 @@ jobs:
         client-payload: '{"ref": "${GITHUB_REF#refs/tags/}", "sha": "${{ github.sha }}"}'
 
   create-x64_vm-ami:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build
     if: startsWith(github.ref, 'refs/tags/v')
     steps:

feeds/bluetooth/nrf52840/files/etc/init.d/nrf52840

@@ -6,7 +6,8 @@ boot() {
 	. /lib/functions/system.sh
 	case $(board_name) in
 	edgecore,eap102|\
-	edgecore,oap102)
+	edgecore,oap102|\
+	edgecore,oap103)
 		echo 54 > /sys/class/gpio/export
 		echo out > /sys/class/gpio/gpio54/direction
 		echo 0 > /sys/class/gpio/gpio54/value

feeds/hfcl/hfcl/Makefile

@@ -0,0 +1,29 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=hfcl
+PKG_VERSION:=1.0
+PKG_BUILD_DIR:= $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/hfcl
+        SECTION:=base
+        CATEGORY:=Utilities
+        TITLE:=hfcl
+endef
+
+define Build/Prepare
+        mkdir -p $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile/Default
+
+endef
+
+Build/Compile = $(Build/Compile/Default)
+
+define Package/hfcl/install
+	cp -rf ./files/* $(1)
+endef
+
+$(eval $(call BuildPackage,hfcl))

feeds/hfcl/hfcl/files/etc/ucentral_check.sh

@@ -0,0 +1,43 @@
+#!/bin/sh
+echo "Start Websocket check/recovery script"
+
+ucentral_conn=$(netstat -atulpn | grep -i ucentral | awk '{print $6}')
+hostname_AP=$(uci get system.@system[0].hostname)
+uc_file_check=$(du /etc/config/ucentral | awk '{print $1}' )
+sleep 20
+
+curr_date=$(date)
+
+if [[ "$uc_file_check" = 0 ]]
+then
+	echo "[[$curr_date]]  empty ucentral file found, need to factory reset"
+	ubi_mount=$(mount | grep ubifs | grep noatime | awk '{print $1}')
+	if [[ "$ubi_mount" != "/dev/ubi0_3" ]]
+	then
+		echo "[[$curr_date]]  ubifs not mounted, need to reboot before factory reset, mount was $ubi_mount"
+		/sbin/reboot
+	else
+		/sbin/jffs2reset -y -r
+	fi
+elif [[ "$hostname_AP" = "OpenWrt" ]]
+then
+	echo "[[$curr_date]] hostname set to openwrt, doing ucentral and capabilities load"
+	/usr/share/ucentral/capabilities.uc
+	rlink=$(readlink -f /etc/ucentral/ucentral.active)
+	/usr/share/ucentral/ucentral.uc /etc/ucentral/ucentral.active
+	rm -rf /etc/ucentral/ucentral.active
+	ln -s $rlink /etc/ucentral/ucentral.active
+	sleep 60
+	ucentral_check=$(netstat -atulpn | grep -i ucentral | awk '{print $6}')
+	if [[ "$ucentral_check" != "ESTABLIHED" ]]
+	then
+		echo "[[$curr_date]] loading didn't work, need to factory reset"
+		/sbin/jffs2reset -y -r
+	fi
+elif [[ "$ucentral_conn" != "ESTABLISHED" ]]
+then
+	echo "[[$curr_date]]  Ucentral either crashed or stopped, restarting the same"
+        /etc/init.d/ucentral restart
+else
+        echo "[[$curr_date]]  Ucentral working all fine, nothing to do"
+fi

feeds/hfcl/hfcl/files/etc/uci-defaults/abc-hfcl-ucentral

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+#rm -f /etc/rc.local
+#cp -f /etc/loop.local /etc/rc.local
+
+crontab -r
+
+/etc/init.d/cron enable
+
+/etc/init.d/cron start
+
+sleep 60
+
+crontab -l | { cat; echo "*/3 * * * * /bin/sh /etc/ucentral_check.sh >> /tmp/ucentral_check";} | crontab -
+
+crontab -l | { cat; echo "* */4 * * * rm -rf /tmp/ucentral_check";} | crontab -
+
+/etc/init.d/cron restart

feeds/hostapd/hostapd/Config.in

@@ -0,0 +1,108 @@
+# wpa_supplicant config
+config WPA_RFKILL_SUPPORT
+	bool "Add rfkill support"
+	depends on PACKAGE_wpa-supplicant || \
+		   PACKAGE_wpa-supplicant-openssl || \
+		   PACKAGE_wpa-supplicant-wolfssl || \
+		   PACKAGE_wpa-supplicant-mbedtls || \
+		   PACKAGE_wpa-supplicant-mesh-openssl || \
+		   PACKAGE_wpa-supplicant-mesh-wolfssl || \
+		   PACKAGE_wpa-supplicant-mesh-mbedtls || \
+		   PACKAGE_wpa-supplicant-basic || \
+		   PACKAGE_wpa-supplicant-mini || \
+		   PACKAGE_wpa-supplicant-p2p || \
+		   PACKAGE_wpad || \
+		   PACKAGE_wpad-openssl || \
+		   PACKAGE_wpad-wolfssl || \
+		   PACKAGE_wpad-mbedtls || \
+		   PACKAGE_wpad-basic || \
+		   PACKAGE_wpad-basic-openssl || \
+		   PACKAGE_wpad-basic-wolfssl || \
+		   PACKAGE_wpad-basic-mbedtls || \
+		   PACKAGE_wpad-mini || \
+		   PACKAGE_wpad-mesh-openssl || \
+		   PACKAGE_wpad-mesh-wolfssl || \
+		   PACKAGE_wpad-mesh-mbedtls
+	default n
+
+config WPA_MSG_MIN_PRIORITY
+	int "Minimum debug message priority"
+	depends on PACKAGE_wpa-supplicant || \
+		   PACKAGE_wpa-supplicant-openssl || \
+		   PACKAGE_wpa-supplicant-wolfssl || \
+		   PACKAGE_wpa-supplicant-mbedtls || \
+		   PACKAGE_wpa-supplicant-mesh-openssl || \
+		   PACKAGE_wpa-supplicant-mesh-wolfssl || \
+		   PACKAGE_wpa-supplicant-mesh-mbedtls || \
+		   PACKAGE_wpa-supplicant-basic || \
+		   PACKAGE_wpa-supplicant-mini || \
+		   PACKAGE_wpa-supplicant-p2p || \
+		   PACKAGE_wpad || \
+		   PACKAGE_wpad-openssl || \
+		   PACKAGE_wpad-wolfssl || \
+		   PACKAGE_wpad-mbedtls || \
+		   PACKAGE_wpad-basic || \
+		   PACKAGE_wpad-basic-openssl || \
+		   PACKAGE_wpad-basic-wolfssl || \
+		   PACKAGE_wpad-basic-mbedtls || \
+		   PACKAGE_wpad-mini || \
+		   PACKAGE_wpad-mesh-openssl || \
+		   PACKAGE_wpad-mesh-wolfssl || \
+		   PACKAGE_wpad-mesh-mbedtls
+	default 3
+	help
+	  Useful values are:
+	    0 = all messages
+		1 = raw message dumps
+		2 = most debugging messages
+		3 = info messages
+		4 = warnings
+		5 = errors
+
+config WPA_WOLFSSL
+	bool
+	default PACKAGE_wpa-supplicant-wolfssl ||\
+	        PACKAGE_wpad-wolfssl ||\
+	        PACKAGE_wpad-basic-wolfssl || \
+	        PACKAGE_wpad-mesh-wolfssl ||\
+	        PACKAGE_eapol-test-wolfssl
+	select WOLFSSL_HAS_AES_CCM
+	select WOLFSSL_HAS_ARC4
+	select WOLFSSL_HAS_DH
+	select WOLFSSL_HAS_OCSP
+	select WOLFSSL_HAS_SESSION_TICKET
+	select WOLFSSL_HAS_WPAS
+
+config DRIVER_11AC_SUPPORT
+	bool
+	default n
+
+config DRIVER_11AX_SUPPORT
+	bool
+	default n
+	select WPA_MBO_SUPPORT
+
+config WPA_ENABLE_WEP
+	bool "Enable support for unsecure and obsolete WEP"
+	help
+	  Wired equivalent privacy (WEP) is an obsolete cryptographic data
+	  confidentiality algorithm that is not considered secure. It should not be used
+	  for anything anymore. The functionality needed to use WEP is available in the
+	  current hostapd release under this optional build parameter and completely
+	  removed in a future release.
+
+config WPA_MBO_SUPPORT
+	bool "Multi Band Operation (Agile Multiband)"
+	default PACKAGE_wpa-supplicant || \
+		PACKAGE_wpa-supplicant-openssl || \
+		PACKAGE_wpa-supplicant-wolfssl || \
+		PACKAGE_wpa-supplicant-mbedtls || \
+		PACKAGE_wpad || \
+		PACKAGE_wpad-openssl || \
+		PACKAGE_wpad-wolfssl || \
+		PACKAGE_wpad-mbedtls
+	help
+	  Multi Band Operation aka (Agile Multiband) enables features
+	  that facilitate efficient use of multiple frequency bands.
+	  Enabling MBO on an AP using RSN requires 802.11w to be enabled.
+	  Hostapd will refuse to start if MBO and RSN are enabled without 11w.

feeds/hostapd/hostapd/Makefile

@@ -0,0 +1,851 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2006-2021 OpenWrt.org
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=hostapd
+PKG_RELEASE:=4
+
+PKG_SOURCE_URL:=http://w1.fi/hostap.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2023-09-08
+PKG_SOURCE_VERSION:=e5ccbfc69ecf297590341ae8b461edba9d8e964c
+PKG_MIRROR_HASH:=fcc6550f46c7f8bbdbf71e63f8f699b9a0878565ad1b90a17855f5ec21283b8f
+
+PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
+PKG_LICENSE:=BSD-3-Clause
+PKG_CPE_ID:=cpe:/a:w1.fi:hostapd
+
+PKG_BUILD_PARALLEL:=1
+PKG_ASLR_PIE_REGULAR:=1
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_PACKAGE_hostapd \
+	CONFIG_PACKAGE_hostapd-basic \
+	CONFIG_PACKAGE_hostapd-mini \
+	CONFIG_WPA_RFKILL_SUPPORT \
+	CONFIG_DRIVER_11AC_SUPPORT \
+	CONFIG_DRIVER_11AX_SUPPORT \
+	CONFIG_WPA_ENABLE_WEP
+
+PKG_BUILD_FLAGS:=gc-sections lto
+
+EAPOL_TEST_PROVIDERS:=eapol-test eapol-test-openssl eapol-test-wolfssl
+
+SUPPLICANT_PROVIDERS:=
+HOSTAPD_PROVIDERS:=
+
+LOCAL_TYPE=$(strip \
+		$(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
+		$(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
+		hostapd \
+		)))
+
+LOCAL_AND_LIB_VARIANT=$(patsubst hostapd-%,%,\
+		      $(patsubst wpad-%,%,\
+		      $(patsubst supplicant-%,%,\
+		      $(BUILD_VARIANT)\
+		      )))
+
+LOCAL_VARIANT=$(patsubst %-internal,%,\
+	      $(patsubst %-openssl,%,\
+	      $(patsubst %-wolfssl,%,\
+	      $(patsubst %-mbedtls,%,\
+	      $(LOCAL_AND_LIB_VARIANT)\
+	      ))))
+
+SSL_VARIANT=$(strip \
+		$(if $(findstring openssl,$(LOCAL_AND_LIB_VARIANT)),openssl,\
+		$(if $(findstring wolfssl,$(LOCAL_AND_LIB_VARIANT)),wolfssl,\
+		$(if $(findstring mbedtls,$(LOCAL_AND_LIB_VARIANT)),mbedtls,\
+		internal\
+		))))
+
+CONFIG_VARIANT:=$(LOCAL_VARIANT)
+ifeq ($(LOCAL_VARIANT),mesh)
+  CONFIG_VARIANT:=full
+endif
+
+include $(INCLUDE_DIR)/package.mk
+
+STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY)
+
+ifneq ($(CONFIG_DRIVER_11AC_SUPPORT),)
+  HOSTAPD_IEEE80211AC:=y
+endif
+
+ifneq ($(CONFIG_DRIVER_11AX_SUPPORT),)
+  HOSTAPD_IEEE80211AX:=y
+endif
+
+CORE_DEPENDS = +ucode +libubus +libucode +ucode-mod-fs +ucode-mod-nl80211 +ucode-mod-rtnl +ucode-mod-ubus +ucode-mod-uloop +libblobmsg-json
+OPENSSL_DEPENDS = +PACKAGE_$(1):libopenssl +PACKAGE_$(1):libopenssl-legacy
+
+DRIVER_MAKEOPTS= \
+	CONFIG_ACS=y CONFIG_DRIVER_NL80211=y \
+	CONFIG_IEEE80211AC=$(HOSTAPD_IEEE80211AC) \
+	CONFIG_IEEE80211AX=$(HOSTAPD_IEEE80211AX) \
+	CONFIG_MBO=$(CONFIG_WPA_MBO_SUPPORT) \
+	CONFIG_UCODE=y
+
+ifeq ($(SSL_VARIANT),openssl)
+  DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_SAE=y
+  TARGET_LDFLAGS += -lcrypto -lssl
+
+  ifeq ($(LOCAL_VARIANT),basic)
+    DRIVER_MAKEOPTS += CONFIG_OWE=y
+  endif
+  ifeq ($(LOCAL_VARIANT),mesh)
+    DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y
+  endif
+  ifeq ($(LOCAL_VARIANT),full)
+    DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y
+  endif
+endif
+
+ifeq ($(SSL_VARIANT),wolfssl)
+  DRIVER_MAKEOPTS += CONFIG_TLS=wolfssl CONFIG_SAE=y
+  TARGET_LDFLAGS += -lwolfssl
+
+  ifeq ($(LOCAL_VARIANT),basic)
+    DRIVER_MAKEOPTS += CONFIG_OWE=y
+  endif
+  ifeq ($(LOCAL_VARIANT),mesh)
+    DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
+  endif
+  ifeq ($(LOCAL_VARIANT),full)
+    DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
+  endif
+endif
+
+ifeq ($(SSL_VARIANT),mbedtls)
+  DRIVER_MAKEOPTS += CONFIG_TLS=mbedtls CONFIG_SAE=y
+  TARGET_LDFLAGS += -lmbedcrypto -lmbedx509 -lmbedtls
+
+  ifeq ($(LOCAL_VARIANT),basic)
+    DRIVER_MAKEOPTS += CONFIG_OWE=y
+  endif
+  ifeq ($(LOCAL_VARIANT),mesh)
+    DRIVER_MAKEOPTS += CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
+  endif
+  ifeq ($(LOCAL_VARIANT),full)
+    DRIVER_MAKEOPTS += CONFIG_OWE=y CONFIG_SUITEB192=y CONFIG_AP=y CONFIG_MESH=y CONFIG_WPS_NFC=1
+  endif
+endif
+
+ifneq ($(LOCAL_TYPE),hostapd)
+  ifdef CONFIG_WPA_RFKILL_SUPPORT
+    DRIVER_MAKEOPTS += NEED_RFKILL=y
+  endif
+endif
+
+DRV_DEPENDS:=+libnl-tiny
+
+
+define Package/hostapd/Default
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=WirelessAPD
+  TITLE:=IEEE 802.1x Authenticator
+  URL:=http://hostap.epitest.fi/
+  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
+  EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
+  USERID:=network=101:network=101
+  PROVIDES:=hostapd
+  CONFLICTS:=$(HOSTAPD_PROVIDERS)
+  HOSTAPD_PROVIDERS+=$(1)
+endef
+
+define Package/hostapd
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (built-in full)
+  VARIANT:=full-internal
+endef
+
+define Package/hostapd/description
+ This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
+ Authenticator.
+endef
+
+define Package/hostapd-openssl
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (OpenSSL full)
+  VARIANT:=full-openssl
+  DEPENDS+=$(OPENSSL_DEPENDS)
+endef
+
+Package/hostapd-openssl/description = $(Package/hostapd/description)
+
+define Package/hostapd-wolfssl
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (wolfSSL full)
+  VARIANT:=full-wolfssl
+  DEPENDS+=+PACKAGE_hostapd-wolfssl:libwolfssl
+endef
+
+Package/hostapd-wolfssl/description = $(Package/hostapd/description)
+
+define Package/hostapd-mbedtls
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (mbedTLS full)
+  VARIANT:=full-mbedtls
+  DEPENDS+=+PACKAGE_hostapd-mbedtls:libmbedtls
+endef
+
+Package/hostapd-mbedtls/description = $(Package/hostapd/description)
+
+define Package/hostapd-basic
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (WPA-PSK, 11r, 11w)
+  VARIANT:=basic
+endef
+
+define Package/hostapd-basic/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
+endef
+
+define Package/hostapd-basic-openssl
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (WPA-PSK, 11r and 11w)
+  VARIANT:=basic-openssl
+  DEPENDS+=+PACKAGE_hostapd-basic-openssl:libopenssl
+endef
+
+define Package/hostapd-basic-openssl/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
+endef
+
+define Package/hostapd-basic-wolfssl
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (WPA-PSK, 11r and 11w)
+  VARIANT:=basic-wolfssl
+  DEPENDS+=+PACKAGE_hostapd-basic-wolfssl:libwolfssl
+endef
+
+define Package/hostapd-basic-wolfssl/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
+endef
+
+define Package/hostapd-basic-mbedtls
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (WPA-PSK, 11r and 11w)
+  VARIANT:=basic-mbedtls
+  DEPENDS+=+PACKAGE_hostapd-basic-mbedtls:libmbedtls
+endef
+
+define Package/hostapd-basic-mbedtls/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.
+endef
+
+define Package/hostapd-mini
+$(call Package/hostapd/Default,$(1))
+  TITLE+= (WPA-PSK only)
+  VARIANT:=mini
+endef
+
+define Package/hostapd-mini/description
+ This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
+endef
+
+
+define Package/wpad/Default
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=WirelessAPD
+  TITLE:=IEEE 802.1x Auth/Supplicant
+  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
+  EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
+  USERID:=network=101:network=101
+  URL:=http://hostap.epitest.fi/
+  PROVIDES:=hostapd wpa-supplicant
+  CONFLICTS:=$(HOSTAPD_PROVIDERS) $(SUPPLICANT_PROVIDERS)
+  HOSTAPD_PROVIDERS+=$(1)
+  SUPPLICANT_PROVIDERS+=$(1)
+endef
+
+define Package/wpad
+$(call Package/wpad/Default,$(1))
+  TITLE+= (built-in full)
+  VARIANT:=wpad-full-internal
+endef
+
+define Package/wpad/description
+ This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
+ Authenticator and Supplicant
+endef
+
+define Package/wpad-openssl
+$(call Package/wpad/Default,$(1))
+  TITLE+= (OpenSSL full)
+  VARIANT:=wpad-full-openssl
+  DEPENDS+=$(OPENSSL_DEPENDS)
+endef
+
+Package/wpad-openssl/description = $(Package/wpad/description)
+
+define Package/wpad-wolfssl
+$(call Package/wpad/Default,$(1))
+  TITLE+= (wolfSSL full)
+  VARIANT:=wpad-full-wolfssl
+  DEPENDS+=+PACKAGE_wpad-wolfssl:libwolfssl
+endef
+
+Package/wpad-wolfssl/description = $(Package/wpad/description)
+
+define Package/wpad-mbedtls
+$(call Package/wpad/Default,$(1))
+  TITLE+= (mbedTLS full)
+  VARIANT:=wpad-full-mbedtls
+  DEPENDS+=+PACKAGE_wpad-mbedtls:libmbedtls
+endef
+
+Package/wpad-mbedtls/description = $(Package/wpad/description)
+
+define Package/wpad-basic
+$(call Package/wpad/Default,$(1))
+  TITLE+= (WPA-PSK, 11r, 11w)
+  VARIANT:=wpad-basic
+endef
+
+define Package/wpad-basic/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, 802.11r and 802.11w support.
+endef
+
+define Package/wpad-basic-openssl
+$(call Package/wpad/Default,$(1))
+  TITLE+= (OpenSSL, 11r, 11w)
+  VARIANT:=wpad-basic-openssl
+  DEPENDS+=$(OPENSSL_DEPENDS)
+endef
+
+define Package/wpad-basic-openssl/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
+endef
+
+define Package/wpad-basic-wolfssl
+$(call Package/wpad/Default,$(1))
+  TITLE+= (wolfSSL, 11r, 11w)
+  VARIANT:=wpad-basic-wolfssl
+  DEPENDS+=+PACKAGE_wpad-basic-wolfssl:libwolfssl
+endef
+
+define Package/wpad-basic-wolfssl/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
+endef
+
+define Package/wpad-basic-mbedtls
+$(call Package/wpad/Default,$(1))
+  TITLE+= (mbedTLS, 11r, 11w)
+  VARIANT:=wpad-basic-mbedtls
+  DEPENDS+=+PACKAGE_wpad-basic-mbedtls:libmbedtls
+endef
+
+define Package/wpad-basic-mbedtls/description
+ This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, SAE (WPA3-Personal), 802.11r and 802.11w support.
+endef
+
+define Package/wpad-mini
+$(call Package/wpad/Default,$(1))
+  TITLE+= (WPA-PSK only)
+  VARIANT:=wpad-mini
+endef
+
+define Package/wpad-mini/description
+ This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
+endef
+
+define Package/wpad-mesh
+$(call Package/wpad/Default,$(1))
+  DEPENDS+=@(!TARGET_uml||BROKEN)
+  PROVIDES+=wpa-supplicant-mesh wpad-mesh
+endef
+
+define Package/wpad-mesh/description
+ This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).
+endef
+
+define Package/wpad-mesh-openssl
+$(call Package/wpad-mesh,$(1))
+  TITLE+= (OpenSSL, 11s, SAE)
+  DEPENDS+=$(OPENSSL_DEPENDS)
+  VARIANT:=wpad-mesh-openssl
+endef
+
+Package/wpad-mesh-openssl/description = $(Package/wpad-mesh/description)
+
+define Package/wpad-mesh-wolfssl
+$(call Package/wpad-mesh,$(1))
+  TITLE+= (wolfSSL, 11s, SAE)
+  DEPENDS+=+PACKAGE_wpad-mesh-wolfssl:libwolfssl
+  VARIANT:=wpad-mesh-wolfssl
+endef
+
+Package/wpad-mesh-wolfssl/description = $(Package/wpad-mesh/description)
+
+define Package/wpad-mesh-mbedtls
+$(call Package/wpad-mesh,$(1))
+  TITLE+= (mbedTLS, 11s, SAE)
+  DEPENDS+=+PACKAGE_wpad-mesh-mbedtls:libmbedtls
+  VARIANT:=wpad-mesh-mbedtls
+endef
+
+Package/wpad-mesh-mbedtls/description = $(Package/wpad-mesh/description)
+
+
+define Package/wpa-supplicant/Default
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=WirelessAPD
+  TITLE:=WPA Supplicant
+  URL:=http://hostap.epitest.fi/wpa_supplicant/
+  DEPENDS:=$(DRV_DEPENDS) +hostapd-common $(CORE_DEPENDS)
+  EXTRA_DEPENDS:=hostapd-common (=$(PKG_VERSION)-$(PKG_RELEASE))
+  USERID:=network=101:network=101
+  PROVIDES:=wpa-supplicant
+  CONFLICTS:=$(SUPPLICANT_PROVIDERS)
+  SUPPLICANT_PROVIDERS+=$(1)
+endef
+
+define Package/wpa-supplicant
+$(call Package/wpa-supplicant/Default,$(1))
+  TITLE+= (built-in full)
+  VARIANT:=supplicant-full-internal
+endef
+
+define Package/wpa-supplicant-openssl
+$(call Package/wpa-supplicant/Default,$(1))
+  TITLE+= (OpenSSL full)
+  VARIANT:=supplicant-full-openssl
+  DEPENDS+=$(OPENSSL_DEPENDS)
+endef
+
+define Package/wpa-supplicant-wolfssl
+$(call Package/wpa-supplicant/Default,$(1))
+  TITLE+= (wolfSSL full)
+  VARIANT:=supplicant-full-wolfssl
+  DEPENDS+=+PACKAGE_wpa-supplicant-wolfssl:libwolfssl
+endef
+
+define Package/wpa-supplicant-mbedtls
+$(call Package/wpa-supplicant/Default,$(1))
+  TITLE+= (mbedTLS full)
+  VARIANT:=supplicant-full-mbedtls
+  DEPENDS+=+PACKAGE_wpa-supplicant-mbedtls:libmbedtls
+endef
+
+define Package/wpa-supplicant/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/wpa-supplicant-p2p
+$(call Package/wpa-supplicant/Default,$(1))
+  TITLE+= (Wi-Fi P2P support)
+  VARIANT:=supplicant-p2p-internal
+endef
+
+define Package/wpa-supplicant-mesh/Default
+$(call Package/wpa-supplicant/Default,$(1))
+  DEPENDS+=@(!TARGET_uml||BROKEN)
+  PROVIDES+=wpa-supplicant-mesh
+endef
+
+define Package/wpa-supplicant-mesh-openssl
+$(call Package/wpa-supplicant-mesh/Default,$(1))
+  TITLE+= (OpenSSL, 11s, SAE)
+  VARIANT:=supplicant-mesh-openssl
+  DEPENDS+=$(OPENSSL_DEPENDS)
+endef
+
+define Package/wpa-supplicant-mesh-wolfssl
+$(call Package/wpa-supplicant-mesh/Default,$(1))
+  TITLE+= (wolfSSL, 11s, SAE)
+  VARIANT:=supplicant-mesh-wolfssl
+  DEPENDS+=+PACKAGE_wpa-supplicant-mesh-wolfssl:libwolfssl
+endef
+
+define Package/wpa-supplicant-mesh-mbedtls
+$(call Package/wpa-supplicant-mesh/Default,$(1))
+  TITLE+= (mbedTLS, 11s, SAE)
+  VARIANT:=supplicant-mesh-mbedtls
+  DEPENDS+=+PACKAGE_wpa-supplicant-mesh-mbedtls:libmbedtls
+endef
+
+define Package/wpa-supplicant-basic
+$(call Package/wpa-supplicant/Default,$(1))
+  TITLE+= (11r, 11w)
+  VARIANT:=supplicant-basic
+endef
+
+define Package/wpa-supplicant-mini
+$(call Package/wpa-supplicant/Default,$(1))
+  TITLE+= (minimal)
+  VARIANT:=supplicant-mini
+endef
+
+
+define Package/hostapd-common
+  TITLE:=hostapd/wpa_supplicant common support files
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=WirelessAPD
+endef
+
+define Package/hostapd-utils
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=WirelessAPD
+  TITLE:=IEEE 802.1x Authenticator (utils)
+  URL:=http://hostap.epitest.fi/
+  DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(HOSTAPD_PROVIDERS),PACKAGE_$(pkg)))
+  VARIANT:=*
+endef
+
+define Package/hostapd-utils/description
+ This package contains a command line utility to control the
+ IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
+endef
+
+define Package/wpa-cli
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=WirelessAPD
+  DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(SUPPLICANT_PROVIDERS),PACKAGE_$(pkg)))
+  TITLE:=WPA Supplicant command line control utility
+  VARIANT:=*
+endef
+
+define Package/eapol-test/Default
+  TITLE:=802.1x auth test utility
+  SECTION:=net
+  SUBMENU:=WirelessAPD
+  CATEGORY:=Network
+  DEPENDS:=$(DRV_DEPENDS) $(CORE_DEPENDS)
+endef
+
+define Package/eapol-test
+  $(call Package/eapol-test/Default,$(1))
+  TITLE+= (built-in full)
+  VARIANT:=supplicant-full-internal
+endef
+
+define Package/eapol-test-openssl
+  $(call Package/eapol-test/Default,$(1))
+  TITLE+= (OpenSSL full)
+  VARIANT:=supplicant-full-openssl
+  CONFLICTS:=$(filter-out eapol-test-openssl ,$(EAPOL_TEST_PROVIDERS))
+  DEPENDS+=$(OPENSSL_DEPENDS)
+  PROVIDES:=eapol-test
+endef
+
+define Package/eapol-test-wolfssl
+  $(call Package/eapol-test/Default,$(1))
+  TITLE+= (wolfSSL full)
+  VARIANT:=supplicant-full-wolfssl
+  CONFLICTS:=$(filter-out eapol-test-openssl ,$(filter-out eapol-test-wolfssl ,$(EAPOL_TEST_PROVIDERS)))
+  DEPENDS+=+PACKAGE_eapol-test-wolfssl:libwolfssl
+  PROVIDES:=eapol-test
+endef
+
+define Package/eapol-test-mbedtls
+  $(call Package/eapol-test/Default,$(1))
+  TITLE+= (mbedTLS full)
+  VARIANT:=supplicant-full-mbedtls
+  CONFLICTS:=$(filter-out eapol-test-openssl ,$(filter-out eapol-test-mbedtls ,$(EAPOL_TEST_PROVIDERS)))
+  DEPENDS+=+PACKAGE_eapol-test-mbedtls:libmbedtls
+  PROVIDES:=eapol-test
+endef
+
+
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
+  define Build/Configure/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
+	rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
+	rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
+	rm -f $(PKG_BUILD_DIR)/.config_*
+	touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
+  endef
+endif
+
+define Build/Configure
+	$(Build/Configure/rebuild)
+	$(if $(wildcard ./files/hostapd-$(CONFIG_VARIANT).config), \
+		$(CP) ./files/hostapd-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config \
+	)
+	$(if $(wildcard ./files/wpa_supplicant-$(CONFIG_VARIANT).config), \
+		$(CP) ./files/wpa_supplicant-$(CONFIG_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
+	)
+endef
+
+TARGET_CPPFLAGS := \
+	-I$(STAGING_DIR)/usr/include/libnl-tiny \
+	-I$(PKG_BUILD_DIR)/src/crypto \
+	$(TARGET_CPPFLAGS) \
+	-DCONFIG_LIBNL20 \
+	-D_GNU_SOURCE \
+	$(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
+
+TARGET_LDFLAGS += -lubox -lubus -lblobmsg_json -lucode -lm -lnl-tiny
+
+ifdef CONFIG_WPA_ENABLE_WEP
+    DRIVER_MAKEOPTS += CONFIG_WEP=y
+endif
+
+define Build/RunMake
+	CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
+	$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
+		$(TARGET_CONFIGURE_OPTS) \
+		$(DRIVER_MAKEOPTS) \
+		LIBS="$(TARGET_LDFLAGS)" \
+		LIBS_c="$(TARGET_LDFLAGS_C)" \
+		AR="$(TARGET_CROSS)gcc-ar" \
+		BCHECK= \
+		$(if $(findstring s,$(OPENWRT_VERBOSE)),V=1) \
+		$(2)
+endef
+
+define Build/Compile/wpad
+	echo ` \
+		$(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \
+		$(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \
+		sed -e 's,-n ,,g' -e 's^$(TARGET_CFLAGS)^^' \
+	` > $(PKG_BUILD_DIR)/.cflags
+	sed -i 's/"/\\"/g' $(PKG_BUILD_DIR)/.cflags
+	+$(call Build/RunMake,hostapd, \
+		CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
+		MULTICALL=1 \
+		hostapd_cli hostapd_multi.a \
+	)
+	+$(call Build/RunMake,wpa_supplicant, \
+		CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
+		MULTICALL=1 \
+		wpa_cli wpa_supplicant_multi.a \
+	)
+	+export MAKEFLAGS="$(MAKE_JOBSERVER)"; $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
+		$(TARGET_CFLAGS) \
+		./files/multicall.c \
+		$(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
+		$(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
+		$(TARGET_LDFLAGS)
+endef
+
+define Build/Compile/hostapd
+	+$(call Build/RunMake,hostapd, \
+		hostapd hostapd_cli \
+	)
+endef
+
+define Build/Compile/supplicant
+	+$(call Build/RunMake,wpa_supplicant, \
+		wpa_cli wpa_supplicant \
+	)
+endef
+
+define Build/Compile/supplicant-full-internal
+	+$(call Build/RunMake,wpa_supplicant, \
+		eapol_test \
+	)
+endef
+
+define Build/Compile/supplicant-full-openssl
+	+$(call Build/RunMake,wpa_supplicant, \
+		eapol_test \
+	)
+endef
+
+define Build/Compile/supplicant-full-wolfssl
+	+$(call Build/RunMake,wpa_supplicant, \
+		eapol_test \
+	)
+endef
+
+define Build/Compile/supplicant-full-mbedtls
+	+$(call Build/RunMake,wpa_supplicant, \
+		eapol_test \
+	)
+endef
+
+define Build/Compile
+	$(Build/Compile/$(LOCAL_TYPE))
+	$(Build/Compile/$(BUILD_VARIANT))
+endef
+
+define Install/hostapd/full
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/etc/config $(1)/etc/radius
+	ln -sf hostapd $(1)/usr/sbin/hostapd-radius
+	$(INSTALL_BIN) ./files/radius.init $(1)/etc/init.d/radius
+	$(INSTALL_DATA) ./files/radius.config $(1)/etc/config/radius
+	$(INSTALL_DATA) ./files/radius.clients $(1)/etc/radius/clients
+	$(INSTALL_DATA) ./files/radius.users $(1)/etc/radius/users
+endef
+
+define Package/hostapd-full/conffiles
+/etc/config/radius
+/etc/radius
+endef
+
+ifeq ($(CONFIG_VARIANT),full)
+Package/wpad-mesh-openssl/conffiles = $(Package/hostapd-full/conffiles)
+Package/wpad-mesh-wolfssl/conffiles = $(Package/hostapd-full/conffiles)
+Package/wpad-mesh-mbedtls/conffiles = $(Package/hostapd-full/conffiles)
+Package/wpad/conffiles = $(Package/hostapd-full/conffiles)
+Package/wpad-openssl/conffiles = $(Package/hostapd-full/conffiles)
+Package/wpad-wolfssl/conffiles = $(Package/hostapd-full/conffiles)
+Package/wpad-mbedtls/conffiles = $(Package/hostapd-full/conffiles)
+Package/hostapd/conffiles = $(Package/hostapd-full/conffiles)
+Package/hostapd-openssl/conffiles = $(Package/hostapd-full/conffiles)
+Package/hostapd-wolfssl/conffiles = $(Package/hostapd-full/conffiles)
+Package/hostapd-mbedtls/conffiles = $(Package/hostapd-full/conffiles)
+endif
+
+define Install/hostapd
+	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap
+	$(INSTALL_DATA) ./files/hostapd.uc $(1)/usr/share/hostap/
+	$(if $(findstring full,$(CONFIG_VARIANT)),$(Install/hostapd/full))
+endef
+
+define Install/supplicant
+	$(INSTALL_DIR) $(1)/usr/sbin $(1)/usr/share/hostap
+	$(INSTALL_DATA) ./files/wpa_supplicant.uc $(1)/usr/share/hostap/
+endef
+
+define Package/hostapd-common/install
+	$(INSTALL_DIR) $(1)/etc/capabilities $(1)/etc/rc.button $(1)/etc/hotplug.d/ieee80211 $(1)/etc/init.d $(1)/lib/netifd  $(1)/usr/share/acl.d $(1)/usr/share/hostap
+	$(INSTALL_BIN) ./files/dhcp-get-server.sh $(1)/lib/netifd/dhcp-get-server.sh
+	$(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/netifd/hostapd.sh
+	$(INSTALL_BIN) ./files/wpad.init $(1)/etc/init.d/wpad
+	$(INSTALL_BIN) ./files/wps-hotplug.sh $(1)/etc/rc.button/wps
+	$(INSTALL_DATA) ./files/wpad_acl.json $(1)/usr/share/acl.d
+	$(INSTALL_DATA) ./files/wpad.json $(1)/etc/capabilities
+	$(INSTALL_DATA) ./files/common.uc $(1)/usr/share/hostap/
+	$(INSTALL_DATA) ./files/wdev.uc $(1)/usr/share/hostap/
+endef
+
+define Package/hostapd/install
+	$(call Install/hostapd,$(1))
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
+endef
+Package/hostapd-basic/install = $(Package/hostapd/install)
+Package/hostapd-basic-openssl/install = $(Package/hostapd/install)
+Package/hostapd-basic-wolfssl/install = $(Package/hostapd/install)
+Package/hostapd-basic-mbedtls/install = $(Package/hostapd/install)
+Package/hostapd-mini/install = $(Package/hostapd/install)
+Package/hostapd-openssl/install = $(Package/hostapd/install)
+Package/hostapd-wolfssl/install = $(Package/hostapd/install)
+Package/hostapd-mbedtls/install = $(Package/hostapd/install)
+
+ifneq ($(LOCAL_TYPE),supplicant)
+  define Package/hostapd-utils/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
+  endef
+endif
+
+define Package/wpad/install
+	$(call Install/hostapd,$(1))
+	$(call Install/supplicant,$(1))
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
+	$(LN) wpad $(1)/usr/sbin/hostapd
+	$(LN) wpad $(1)/usr/sbin/wpa_supplicant
+endef
+Package/wpad-basic/install = $(Package/wpad/install)
+Package/wpad-basic-openssl/install = $(Package/wpad/install)
+Package/wpad-basic-wolfssl/install = $(Package/wpad/install)
+Package/wpad-basic-mbedtls/install = $(Package/wpad/install)
+Package/wpad-mini/install = $(Package/wpad/install)
+Package/wpad-openssl/install = $(Package/wpad/install)
+Package/wpad-wolfssl/install = $(Package/wpad/install)
+Package/wpad-mbedtls/install = $(Package/wpad/install)
+Package/wpad-mesh-openssl/install = $(Package/wpad/install)
+Package/wpad-mesh-wolfssl/install = $(Package/wpad/install)
+Package/wpad-mesh-mbedtls/install = $(Package/wpad/install)
+
+define Package/wpa-supplicant/install
+	$(call Install/supplicant,$(1))
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
+endef
+Package/wpa-supplicant-basic/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-p2p/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-openssl/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-wolfssl/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-mbedtls/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-mesh-openssl/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-mesh-wolfssl/install = $(Package/wpa-supplicant/install)
+Package/wpa-supplicant-mesh-mbedtls/install = $(Package/wpa-supplicant/install)
+
+ifneq ($(LOCAL_TYPE),hostapd)
+  define Package/wpa-cli/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
+  endef
+endif
+
+ifeq ($(BUILD_VARIANT),supplicant-full-internal)
+  define Package/eapol-test/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
+  endef
+endif
+
+ifeq ($(BUILD_VARIANT),supplicant-full-openssl)
+  define Package/eapol-test-openssl/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
+  endef
+endif
+
+ifeq ($(BUILD_VARIANT),supplicant-full-wolfssl)
+  define Package/eapol-test-wolfssl/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
+  endef
+endif
+
+ifeq ($(BUILD_VARIANT),supplicant-full-mbedtls)
+  define Package/eapol-test-mbedtls/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/wpa_supplicant/eapol_test $(1)/usr/sbin/
+  endef
+endif
+
+# Build hostapd-common before its dependents, to avoid
+# spurious rebuilds when building multiple variants.
+$(eval $(call BuildPackage,hostapd-common))
+$(eval $(call BuildPackage,hostapd))
+$(eval $(call BuildPackage,hostapd-basic))
+$(eval $(call BuildPackage,hostapd-basic-openssl))
+$(eval $(call BuildPackage,hostapd-basic-wolfssl))
+$(eval $(call BuildPackage,hostapd-basic-mbedtls))
+$(eval $(call BuildPackage,hostapd-mini))
+$(eval $(call BuildPackage,hostapd-openssl))
+$(eval $(call BuildPackage,hostapd-wolfssl))
+$(eval $(call BuildPackage,hostapd-mbedtls))
+$(eval $(call BuildPackage,wpad))
+$(eval $(call BuildPackage,wpad-mesh-openssl))
+$(eval $(call BuildPackage,wpad-mesh-wolfssl))
+$(eval $(call BuildPackage,wpad-mesh-mbedtls))
+$(eval $(call BuildPackage,wpad-basic))
+$(eval $(call BuildPackage,wpad-basic-openssl))
+$(eval $(call BuildPackage,wpad-basic-wolfssl))
+$(eval $(call BuildPackage,wpad-basic-mbedtls))
+$(eval $(call BuildPackage,wpad-mini))
+$(eval $(call BuildPackage,wpad-openssl))
+$(eval $(call BuildPackage,wpad-wolfssl))
+$(eval $(call BuildPackage,wpad-mbedtls))
+$(eval $(call BuildPackage,wpa-supplicant))
+$(eval $(call BuildPackage,wpa-supplicant-mesh-openssl))
+$(eval $(call BuildPackage,wpa-supplicant-mesh-wolfssl))
+$(eval $(call BuildPackage,wpa-supplicant-mesh-mbedtls))
+$(eval $(call BuildPackage,wpa-supplicant-basic))
+$(eval $(call BuildPackage,wpa-supplicant-mini))
+$(eval $(call BuildPackage,wpa-supplicant-p2p))
+$(eval $(call BuildPackage,wpa-supplicant-openssl))
+$(eval $(call BuildPackage,wpa-supplicant-wolfssl))
+$(eval $(call BuildPackage,wpa-supplicant-mbedtls))
+$(eval $(call BuildPackage,wpa-cli))
+$(eval $(call BuildPackage,hostapd-utils))
+$(eval $(call BuildPackage,eapol-test))
+$(eval $(call BuildPackage,eapol-test-openssl))
+$(eval $(call BuildPackage,eapol-test-wolfssl))
+$(eval $(call BuildPackage,eapol-test-mbedtls))

feeds/hostapd/hostapd/README.md

@@ -0,0 +1,419 @@
+# UBUS methods - hostapd
+
+## bss_mgmt_enable
+Enable 802.11k/v features.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| neighbor_report | bool | no | enable 802.11k neighbor reports |
+| beacon_report | bool | no | enable 802.11k beacon reports |
+| link_measurements | bool | no | enable 802.11k link measurements |
+| bss_transition | bool | no | enable 802.11v BSS transition support |
+
+### example
+`ubus call hostapd.wl5-fb bss_mgmt_enable '{ "neighbor_report": true, "beacon_report": true, "link_measurements": true, "bss_transition": true
+}'`
+
+
+## bss_transition_request
+Initiate an 802.11v transition request.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| addr | string | yes | client MAC address |
+| disassociation_imminent | bool | no | set Disassociation Imminent bit |
+| disassociation_timer | int32 | no | disassociate client if it doesn't roam after this time |
+| validity_period | int32 | no | validity of the BSS Transition Candiate List |
+| neighbors | array | no | BSS Transition Candidate List |
+| abridged | bool | no | prefer APs in the BSS Transition Candidate List |
+| dialog_token | int32 | no | identifier for the request/report transaction |
+| mbo_reason | int32 | no | MBO Transition Reason Code Attribute |
+| cell_pref | int32 | no | MBO Cellular Data Connection Preference Attribute |
+| reassoc_delay | int32 | no | MBO Re-association retry delay |
+
+### example
+`ubus call hostapd.wl5-fb bss_transition_request '{ "addr": "68:2F:67:8B:98:ED", "disassociation_imminent": false, "disassociation_timer": 0, "validity_period": 30, "neighbors": ["b6a7b9cbeebabf5900008064090603026a00"], "abridged": 1 }'`
+
+
+## config_add
+Dynamically load a BSS configuration from a file. This is used by netifd's mac80211 support script to configure BSSes on multiple PHYs in a single hostapd instance.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| iface | string | yes | WiFi interface name |
+| config | string | yes | path to hostapd config file |
+
+
+## config_remove
+Dynamically remove a BSS configuration.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| iface | string | yes | WiFi interface name |
+
+
+## del_client
+Kick a client off the network.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| addr | string | yes | client MAC address |
+| reason | int32 | no | 802.11 reason code |
+| deauth | bool | no | deauthenticates client instead of disassociating |
+| ban_time | int32 | no | ban client for N milliseconds |
+
+### example
+`ubus call hostapd.wl5-fb del_client '{ "addr": "68:2f:67:8b:98:ed", "reason": 5, "deauth": true, "ban_time": 10000 }'`
+
+
+## get_clients
+Show associated clients.
+
+### example
+`ubus call hostapd.wl5-fb get_clients`
+
+### output
+```json
+{
+        "freq": 5260,
+        "clients": {
+                "68:2f:67:8b:98:ed": {
+                        "auth": true,
+                        "assoc": true,
+                        "authorized": true,
+                        "preauth": false,
+                        "wds": false,
+                        "wmm": true,
+                        "ht": true,
+                        "vht": true,
+                        "he": false,
+                        "wps": false,
+                        "mfp": true,
+                        "rrm": [
+                                0,
+                                0,
+                                0,
+                                0,
+                                0
+                        ],
+                        "extended_capabilities": [
+                                0,
+                                0,
+                                0,
+                                0,
+                                0,
+                                0,
+                                0,
+                                64
+                        ],
+                        "aid": 3,
+                        "signature": "wifi4|probe:0,1,45,127,107,191,221(0017f2,10),221(001018,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,extcap:0000008000000040|assoc:0,1,33,36,48,45,127,191,221(0017f2,10),221(001018,2),221(0050f2,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,txpow:14f9,extcap:0000000000000040",
+                        "bytes": {
+                                "rx": 1933667,
+                                "tx": 746805
+                        },
+                        "airtime": {
+                                "rx": 208863,
+                                "tx": 9037883
+                        },
+                        "packets": {
+                                "rx": 3587,
+                                "tx": 2185
+                        },
+                        "rate": {
+                                "rx": 866700,
+                                "tx": 866700
+                        },
+                        "signal": -50,
+                        "capabilities": {
+                                "vht": {
+                                        "su_beamformee": true,
+                                        "mu_beamformee": false,
+                                        "mcs_map": {
+                                                "rx": {
+                                                        "1ss": 9,
+                                                        "2ss": 9,
+                                                        "3ss": 9,
+                                                        "4ss": -1,
+                                                        "5ss": -1,
+                                                        "6ss": -1,
+                                                        "7ss": -1,
+                                                        "8ss": -1
+                                                },
+                                                "tx": {
+                                                        "1ss": 9,
+                                                        "2ss": 9,
+                                                        "3ss": 9,
+                                                        "4ss": -1,
+                                                        "5ss": -1,
+                                                        "6ss": -1,
+                                                        "7ss": -1,
+                                                        "8ss": -1
+                                                }
+                                        }
+                                }
+                        }
+                }
+        }
+}
+```
+
+
+## get_features
+Show HT/VHT support.
+
+### example
+`ubus call hostapd.wl5-fb get_features`
+
+### output
+```json
+{
+        "ht_supported": true,
+        "vht_supported": true
+}
+```
+
+
+## get_status
+Get BSS status.
+
+### example
+`ubus call hostapd.wl5-fb get_status`
+
+### output
+```json
+{
+        "status": "ENABLED",
+        "bssid": "b6:a7:b9:cb:ee:bc",
+        "ssid": "fb",
+        "freq": 5260,
+        "channel": 52,
+        "op_class": 128,
+        "beacon_interval": 100,
+        "phy": "wl5-lan",
+        "rrm": {
+                "neighbor_report_tx": 0
+        },
+        "wnm": {
+                "bss_transition_query_rx": 0,
+                "bss_transition_request_tx": 0,
+                "bss_transition_response_rx": 0
+        },
+        "airtime": {
+                "time": 259561738,
+                "time_busy": 2844249,
+                "utilization": 0
+        },
+        "dfs": {
+                "cac_seconds": 60,
+                "cac_active": false,
+                "cac_seconds_left": 0
+        }
+}
+```
+
+
+## link_measurement_req
+Initiate an 802.11k Link Measurement Request.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| addr | string | yes | client MAC address |
+| tx-power-used | int32 | no | transmit power used to transmit the Link Measurement Request frame |
+| tx-power-max | int32 | no | upper limit of transmit power to be used by the client |
+
+
+## list_bans
+List banned clients.
+
+### example
+`ubus call hostapd.wl5-fb list_bans`
+
+### output
+```json
+{
+        "clients": [
+                "68:2f:67:8b:98:ed"
+        ]
+}
+```
+
+
+## notify_response
+When enabled, hostapd will send a ubus notification and wait for a response before responding to various requests. This is used by e.g. usteer to make it possible to ignore probe requests.
+
+:warning: enabling this will cause hostapd to stop responding to probe requests unless a ubus subscriber responds to the ubus notifications.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| notify_response | int32 | yes | disable (0) or enable (!0) |
+
+### example
+`ubus call hostapd.wl5-fb notify_response '{ "notify_response": 1 }'`
+
+## reload
+Reload BSS configuration.
+
+:warning: this can cause problems for certain configurations:
+
+```
+Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
+Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
+Mon May 16 16:09:08 2022 daemon.err hostapd: Wrong coupling between HT and VHT/HE channel setting
+```
+
+### example
+`ubus call hostapd.wl5-fb reload`
+
+
+## rrm_beacon_req
+Send a Beacon Measurement Request to a client.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| addr | string | yes | client MAC address |
+| op_class | int32 | yes | the Regulatory Class for which this Measurement Request applies |
+| channel | int32 | yes | channel to measure |
+| duration | int32 | yes | compile Beacon Measurement Report after N TU |
+| mode | int32 | yes | mode to be used for measurement (0: passive, 1: active, 2: beacon table) |
+| bssid | string | no | filter BSSes in Beacon Measurement Report by BSSID |
+| ssid | string | no | filter BSSes in Beacon Measurement Report by SSID|
+
+
+## rrm_nr_get_own
+Show Neighbor Report Element for this BSS.
+
+### example
+`ubus call hostapd.wl5-fb rrm_nr_get_own`
+
+### output
+```json
+{
+        "value": [
+                "b6:a7:b9:cb:ee:bc",
+                "fb",
+                "b6a7b9cbeebcaf5900008095090603029b00"
+        ]
+}
+```
+
+
+## rrm_nr_list
+Show Neighbor Report Elements for other BSSes in this ESS.
+
+### example
+`ubus call hostapd.wl5-fb rrm_nr_list`
+
+### output
+```json
+{
+        "list": [
+                [
+                        "b6:a7:b9:cb:ee:ba",
+                        "fb",
+                        "b6a7b9cbeebabf5900008064090603026a00"
+                ]
+        ]
+}
+```
+
+## rrm_nr_set
+Set the Neighbor Report Elements. An element for the node on which this command is executed will always be added.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| list | array | yes | array of Neighbor Report Elements in the format of the rrm_nr_list output |
+
+### example
+`ubus call hostapd.wl5-fb rrm_nr_set '{ "list": [ [ "b6:a7:b9:cb:ee:ba", "fb", "b6a7b9cbeebabf5900008064090603026a00" ] ] }'`
+
+
+## set_vendor_elements
+Configure Vendor-specific Information Elements for BSS.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| vendor_elements | string | yes | Vendor-specific Information Elements as hex string |
+
+### example
+`ubus call hostapd.wl5-fb set_vendor_elements '{ "vendor_elements": "dd054857dd6662" }'`
+
+
+## switch_chan
+Initiate a channel switch.
+
+:warning: trying to switch to the channel that is currently in use will fail: `Command failed: Operation not supported`
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| freq | int32 | yes | frequency in MHz to switch to |
+| bcn_count | int32 | no | count in Beacon frames (TBTT) to perform the switch |
+| center_freq1 | int32 | no | segment 0 center frequency in MHz (valid for HT and VHT) |
+| center_freq2 | int32 | no | segment 1 center frequency in MHz (valid only for 80 MHz channel width and an 80+80 channel) |
+| bandwidth | int32 | no | channel width to use |
+| sec_channel_offset| int32 | no | secondary channel offset for HT40 (0 = disabled, 1 = HT40+, -1 = HT40-) |
+| ht | bool | no | enable 802.11n |
+| vht | bool | no | enable 802.11ac |
+| he | bool | no | enable 802.11ax |
+| block_tx | bool | no | block transmission during CSA period |
+| csa_force | bool | no | restart the interface in case the CSA fails |
+
+## example
+`ubus call hostapd.wl5-fb switch_chan '{ "freq": 5180, "bcn_count": 10, "center_freq1": 5210, "bandwidth": 80, "he": 1, "block_tx": 1, "csa_force": 0 }'`
+
+
+## update_airtime
+Set dynamic airtime weight for client.
+
+### arguments
+| Name | Type | Required | Description |
+|---|---|---|---|
+| sta | string | yes | client MAC address |
+| weight | int32 | yes | airtime weight |
+
+
+## update_beacon
+Force beacon frame content to be updated and to start beaconing on an interface that uses start_disabled=1.
+
+### example
+`ubus call hostapd.wl5-fb update_beacon`
+
+
+## wps_status
+Get WPS status for BSS.
+
+### example
+`ubus call hostapd.wl5-fb wps_status`
+
+### output
+```json
+{
+        "pbc_status": "Disabled",
+        "last_wps_result": "None"
+}
+```
+
+
+## wps_cancel
+Cancel WPS Push Button Configuration.
+
+### example
+`ubus call hostapd.wl5-fb wps_cancel`
+
+
+## wps_start
+Start WPS Push Button Configuration.
+
+### example
+`ubus call hostapd.wl5-fb wps_start`

feeds/hostapd/hostapd/files/dhcp-get-server.sh

@@ -0,0 +1,2 @@
+#!/bin/sh
+[ "$1" = bound ] && echo "$serverid"

feeds/hostapd/hostapd/files/hostapd-basic.config

@@ -0,0 +1,404 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+#CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# IEEE 802.11w (management frame protection)
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Integrated EAP server
+#CONFIG_EAP=y
+
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+#CONFIG_ERP=y
+
+# EAP-MD5 for the integrated EAP server
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+#CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+#CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+#CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+CONFIG_AIRTIME_POLICY=y
+
+# Proxy ARP support
+#CONFIG_PROXYARP=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/hostapd-full.config

@@ -0,0 +1,404 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# IEEE 802.11w (management frame protection)
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Integrated EAP server
+CONFIG_EAP=y
+
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+CONFIG_ERP=y
+
+# EAP-MD5 for the integrated EAP server
+CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+CONFIG_AIRTIME_POLICY=y
+
+# Proxy ARP support
+CONFIG_PROXYARP=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/hostapd-mini.config

@@ -0,0 +1,404 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+#CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+#CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# IEEE 802.11w (management frame protection)
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Integrated EAP server
+#CONFIG_EAP=y
+
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+#CONFIG_ERP=y
+
+# EAP-MD5 for the integrated EAP server
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+#CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+#CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+#CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+#CONFIG_AIRTIME_POLICY=y
+
+# Proxy ARP support
+#CONFIG_PROXYARP=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/radius.clients

@@ -0,0 +1 @@
+0.0.0.0/0 radius

feeds/hostapd/hostapd/files/radius.config

@@ -0,0 +1,9 @@
+config radius
+	option disabled '1'
+	option ca_cert '/etc/radius/ca.pem'
+	option cert '/etc/radius/cert.pem'
+	option key '/etc/radius/key.pem'
+	option users '/etc/radius/users'
+	option clients '/etc/radius/clients'
+	option auth_port '1812'
+	option acct_port '1813'

feeds/hostapd/hostapd/files/radius.init

@@ -0,0 +1,42 @@
+#!/bin/sh /etc/rc.common
+
+START=30
+
+USE_PROCD=1
+NAME=radius
+
+radius_start() {
+	local cfg="$1"
+
+	config_get_bool disabled "$cfg" disabled 0
+
+	[ "$disabled" -gt 0 ] && return
+
+	config_get ca "$cfg" ca_cert
+	config_get key "$cfg" key
+	config_get cert "$cfg" cert
+	config_get users "$cfg" users
+	config_get clients "$cfg" clients
+	config_get auth_port "$cfg" auth_port 1812
+	config_get acct_port "$cfg" acct_port 1813
+	config_get identity "$cfg" identity "$(cat /proc/sys/kernel/hostname)"
+
+	procd_open_instance $cfg
+	procd_set_param command /usr/sbin/hostapd-radius \
+		-C "$ca" \
+		-c "$cert" -k "$key" \
+		-s "$clients" -u "$users" \
+		-p "$auth_port" -P "$acct_port" \
+		-i "$identity"
+	procd_close_instance
+}
+
+start_service() {
+	config_load radius
+	config_foreach radius_start radius
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "radius"
+}

feeds/hostapd/hostapd/files/radius.users

@@ -0,0 +1,14 @@
+{
+	"phase1": {
+		"wildcard": [
+			{
+				"name": "*",
+				"methods": [ "PEAP" ]
+			}
+		]
+	},
+	"phase2": {
+		"users": {
+		}
+	}
+}

feeds/hostapd/hostapd/files/wpa_supplicant-basic.config

@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+#CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+#CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+#CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+#CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+#CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+#CONFIG_EAP_GTC=y
+
+# EAP-OTP
+#CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+#CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+#CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+#CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpa_supplicant-full.config

@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpa_supplicant-mini.config

@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+#CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+#CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+#CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+#CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+#CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+#CONFIG_EAP_GTC=y
+
+# EAP-OTP
+#CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+#CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+#CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+#CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+#CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+#CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpa_supplicant-p2p.config

@@ -0,0 +1,625 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# wpa_supplicant binary. All lines starting with # are ignored. Configuration
+# option lines must be commented out complete, if they are not to be included,
+# i.e., just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+#CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for MACsec capable Qualcomm Atheros drivers
+#CONFIG_DRIVER_MACSEC_QCA=y
+
+# Driver interface for Linux MACsec drivers
+#CONFIG_DRIVER_MACSEC_LINUX=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Solaris libraries
+#LIBS += -lsocket -ldlpi -lnsl
+#LIBS_c += -lsocket
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
+# MACsec is included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+CONFIG_EAP_FAST=y
+
+# EAP-TEAP
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# Enable SIM simulator (Milenage) for EAP-SIM
+#CONFIG_SIM_SIMULATOR=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# MACsec
+#CONFIG_MACSEC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# udp6 = UDP IPv6 sockets using localhost (::1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operating system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# Disable Linux packet socket workaround applicable for station interface
+# in a bridge for EAPOL frames. This should be uncommented only if the kernel
+# is known to not have the regression issue in packet socket behavior with
+# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
+CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+CONFIG_IEEE80211W=y
+
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Add support for writing debug log to Android logcat instead of standard
+# output
+#CONFIG_ANDROID_LOG=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable interface matching in wpa_supplicant
+#CONFIG_MATCH_IFACE=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+#CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# OS X builds. This is only for building eapol_test.
+#CONFIG_OSX=y
+
+# Automatic Channel Selection
+# This will allow wpa_supplicant to pick the channel automatically when channel
+# is set to "0".
+#
+# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
+# to "channel=0". This would enable us to eventually add other ACS algorithms in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
+# a newly to create wpa_supplicant.conf variable acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#CONFIG_ACS=y
+
+# Support Multi Band Operation
+#CONFIG_MBO=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Support RSN on IBSS networks
+# This is needed to be able to use mode=1 network profile with proto=RSN and
+# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
+CONFIG_IBSS_RSN=y
+
+# External PMKSA cache control
+# This can be used to enable control interface commands that allow the current
+# PMKSA cache entries to be fetched and new entries to be added.
+#CONFIG_PMKSA_CACHE_EXTERNAL=y
+
+# Mesh Networking (IEEE 802.11s)
+#CONFIG_MESH=y
+
+# Background scanning modules
+# These can be used to request wpa_supplicant to perform background scanning
+# operations for roaming within an ESS (same SSID). See the bgscan parameter in
+# the wpa_supplicant.conf file for more details.
+# Periodic background scans based on signal strength
+#CONFIG_BGSCAN_SIMPLE=y
+# Learn channels used by the network and try to avoid bgscans on other
+# channels (experimental)
+#CONFIG_BGSCAN_LEARN=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y
+
+# OpenWrt patch 380-disable-ctrl-iface-mib.patch
+# leads to the MIB only being compiled in if
+# CONFIG_CTRL_IFACE_MIB is enabled.
+CONFIG_CTRL_IFACE_MIB=y

feeds/hostapd/hostapd/files/wpad_acl.json

@@ -0,0 +1,16 @@
+{
+	"user": "network",
+	"access": {
+		"service": {
+			"methods": [ "event" ]
+		},
+		"wpa_supplicant": {
+			"methods": [ "phy_set_state", "phy_set_macaddr_list", "phy_status" ]
+		},
+		"hostapd": {
+			"methods": [ "apsta_state" ]
+		}
+	},
+	"publish": [ "hostapd", "hostapd.*", "wpa_supplicant", "wpa_supplicant.*" ],
+	"send": [ "bss.*", "wps_credentials" ]
+}

feeds/hostapd/hostapd/files/wps-hotplug.sh

@@ -0,0 +1,69 @@
+#!/bin/sh
+
+wps_catch_credentials() {
+	local iface ifaces ifc ifname ssid encryption key radio radios
+	local found=0
+
+	. /usr/share/libubox/jshn.sh
+	ubus -S -t 30 listen wps_credentials | while read creds; do
+		json_init
+		json_load "$creds"
+		json_select wps_credentials || continue
+		json_get_vars ifname ssid key encryption
+		local ifcname="$ifname"
+		json_init
+		json_load "$(ubus -S call network.wireless status)"
+		json_get_keys radios
+		for radio in $radios; do
+			json_select $radio
+			json_select interfaces
+			json_get_keys ifaces
+			for ifc in $ifaces; do
+				json_select $ifc
+				json_get_vars ifname
+				[ "$ifname" = "$ifcname" ] && {
+					ubus -S call uci set "{\"config\":\"wireless\", \"type\":\"wifi-iface\",		\
+								\"match\": { \"device\": \"$radio\", \"encryption\": \"wps\" },	\
+								\"values\": { \"encryption\": \"$encryption\", 			\
+										\"ssid\": \"$ssid\", 				\
+										\"key\": \"$key\" } }"
+					ubus -S call uci commit '{"config": "wireless"}'
+					ubus -S call uci apply
+				}
+				json_select ..
+			done
+			json_select ..
+			json_select ..
+		done
+	done
+}
+
+if [ "$ACTION" = "released" ] && [ "$BUTTON" = "wps" ]; then
+	# If the button was pressed for 3 seconds or more, trigger WPS on
+	# wpa_supplicant only, no matter if hostapd is running or not.  If
+	# was pressed for less than 3 seconds, try triggering on
+	# hostapd. If there is no hostapd instance to trigger it on or WPS
+	# is not enabled on them, trigger it on wpa_supplicant.
+	if [ "$SEEN" -lt 3 ] ; then
+		wps_done=0
+		ubusobjs="$( ubus -S list hostapd.* )"
+		for ubusobj in $ubusobjs; do
+			ubus -S call $ubusobj wps_start && wps_done=1
+		done
+		[ $wps_done = 0 ] || return 0
+	fi
+	wps_done=0
+	ubusobjs="$( ubus -S list wpa_supplicant.* )"
+	for ubusobj in $ubusobjs; do
+		ifname="$(echo $ubusobj | cut -d'.' -f2 )"
+		multi_ap=""
+		if [ -e "/var/run/wpa_supplicant-${ifname}.conf.is_multiap" ]; then
+			ubus -S call $ubusobj wps_start '{ "multi_ap": true }' && wps_done=1
+		else
+			ubus -S call $ubusobj wps_start && wps_done=1
+		fi
+	done
+	[ $wps_done = 0 ] || wps_catch_credentials &
+fi
+
+return 0

feeds/hostapd/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch

@@ -0,0 +1,135 @@
+From 8de8cd8380af0c43d4fde67a668d79ef73b26b26 Mon Sep 17 00:00:00 2001
+From: Peter Oh <peter.oh@bowerswilkins.com>
+Date: Tue, 30 Jun 2020 14:18:58 +0200
+Subject: [PATCH 10/19] mesh: Allow DFS channels to be selected if dfs is
+ enabled
+
+Note: DFS is assumed to be usable if a country code has been set
+
+Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
+Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
+---
+ wpa_supplicant/wpa_supplicant.c | 25 +++++++++++++++++++------
+ 1 file changed, 19 insertions(+), 6 deletions(-)
+
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -2638,7 +2638,7 @@ static int drv_supports_vht(struct wpa_s
+ }
+ 
+ 
+-static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode)
++static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode, bool dfs_enabled)
+ {
+ 	int i;
+ 
+@@ -2647,7 +2647,10 @@ static bool ibss_mesh_is_80mhz_avail(int
+ 
+ 		chan = hw_get_channel_chan(mode, i, NULL);
+ 		if (!chan ||
+-		    chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
++		    chan->flag & HOSTAPD_CHAN_DISABLED)
++			return false;
++		
++		if (!dfs_enabled && chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
+ 			return false;
+ 	}
+ 
+@@ -2774,7 +2777,7 @@ static void ibss_mesh_select_40mhz(struc
+ 				   const struct wpa_ssid *ssid,
+ 				   struct hostapd_hw_modes *mode,
+ 				   struct hostapd_freq_params *freq,
+-				   int obss_scan) {
++				   int obss_scan, bool dfs_enabled) {
+ 	int chan_idx;
+ 	struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
+ 	int i, res;
+@@ -2798,8 +2801,11 @@ static void ibss_mesh_select_40mhz(struc
+ 		return;
+ 
+ 	/* Check primary channel flags */
+-	if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
++	if (pri_chan->flag & HOSTAPD_CHAN_DISABLED)
+ 		return;
++	if (pri_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
++		if (!dfs_enabled)
++			return;
+ 
+ #ifdef CONFIG_HT_OVERRIDES
+ 	if (ssid->disable_ht40)
+@@ -2825,8 +2831,11 @@ static void ibss_mesh_select_40mhz(struc
+ 		return;
+ 
+ 	/* Check secondary channel flags */
+-	if (sec_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
++	if (sec_chan->flag & HOSTAPD_CHAN_DISABLED)
+ 		return;
++	if (sec_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
++		if (!dfs_enabled)
++			return;
+ 
+ 	if (ht40 == -1) {
+ 		if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
+@@ -2880,7 +2889,7 @@ static bool ibss_mesh_select_80_160mhz(s
+ 				       const struct wpa_ssid *ssid,
+ 				       struct hostapd_hw_modes *mode,
+ 				       struct hostapd_freq_params *freq,
+-				       int ieee80211_mode, bool is_6ghz) {
++				       int ieee80211_mode, bool is_6ghz, bool dfs_enabled) {
+ 	static const int bw80[] = {
+ 		5180, 5260, 5500, 5580, 5660, 5745, 5825,
+ 		5955, 6035, 6115, 6195, 6275, 6355, 6435,
+@@ -2925,7 +2934,7 @@ static bool ibss_mesh_select_80_160mhz(s
+ 		goto skip_80mhz;
+ 
+ 	/* Use 40 MHz if channel not usable */
+-	if (!ibss_mesh_is_80mhz_avail(channel, mode))
++	if (!ibss_mesh_is_80mhz_avail(channel, mode, dfs_enabled))
+ 		goto skip_80mhz;
+ 
+ 	chwidth = CONF_OPER_CHWIDTH_80MHZ;
+@@ -2939,7 +2948,7 @@ static bool ibss_mesh_select_80_160mhz(s
+ 	if ((mode->he_capab[ieee80211_mode].phy_cap[
+ 		     HE_PHYCAP_CHANNEL_WIDTH_SET_IDX] &
+ 	     HE_PHYCAP_CHANNEL_WIDTH_SET_160MHZ_IN_5G) && is_6ghz &&
+-	    ibss_mesh_is_80mhz_avail(channel + 16, mode)) {
++	    ibss_mesh_is_80mhz_avail(channel + 16, mode, dfs_enabled)) {
+ 		for (j = 0; j < ARRAY_SIZE(bw160); j++) {
+ 			if (freq->freq == bw160[j]) {
+ 				chwidth = CONF_OPER_CHWIDTH_160MHZ;
+@@ -2967,10 +2976,12 @@ static bool ibss_mesh_select_80_160mhz(s
+ 				if (!chan)
+ 					continue;
+ 
+-				if (chan->flag & (HOSTAPD_CHAN_DISABLED |
+-						  HOSTAPD_CHAN_NO_IR |
+-						  HOSTAPD_CHAN_RADAR))
++				if (chan->flag & HOSTAPD_CHAN_DISABLED)
+ 					continue;
++				if (chan->flag & (HOSTAPD_CHAN_RADAR |
++						  HOSTAPD_CHAN_NO_IR))
++					if (!dfs_enabled)
++						continue;
+ 
+ 				/* Found a suitable second segment for 80+80 */
+ 				chwidth = CONF_OPER_CHWIDTH_80P80MHZ;
+@@ -3025,6 +3036,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	int i, obss_scan = 1;
+ 	u8 channel;
+ 	bool is_6ghz;
++	bool dfs_enabled = wpa_s->conf->country[0] && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
+ 
+ 	freq->freq = ssid->frequency;
+ 
+@@ -3070,9 +3082,9 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	freq->channel = channel;
+ 	/* Setup higher BW only for 5 GHz */
+ 	if (mode->mode == HOSTAPD_MODE_IEEE80211A) {
+-		ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan);
++		ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan, dfs_enabled);
+ 		if (!ibss_mesh_select_80_160mhz(wpa_s, ssid, mode, freq,
+-						ieee80211_mode, is_6ghz))
++						ieee80211_mode, is_6ghz, dfs_enabled))
+ 			freq->he_enabled = freq->vht_enabled = false;
+ 	}
+ 

feeds/hostapd/hostapd/patches/011-mesh-use-deterministic-channel-on-channel-switch.patch

@@ -0,0 +1,81 @@
+From fc8ea40f6130ac18d9c66797de2cf1d5af55d496 Mon Sep 17 00:00:00 2001
+From: Markus Theil <markus.theil@tu-ilmenau.de>
+Date: Tue, 30 Jun 2020 14:19:07 +0200
+Subject: [PATCH 19/19] mesh: use deterministic channel on channel switch
+
+This patch uses a deterministic channel on DFS channel switch
+in mesh networks. Otherwise, when switching to a usable but not
+available channel, no CSA can be sent and a random channel is choosen
+without notification of other nodes. It is then quite likely, that
+the mesh network gets disconnected.
+
+Fix this by using a deterministic number, based on the sha256 hash
+of the mesh ID, in order to use at least a different number in each
+mesh network.
+
+Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
+---
+ src/ap/dfs.c                 | 20 +++++++++++++++++++-
+ src/drivers/driver_nl80211.c |  4 ++++
+ 2 files changed, 23 insertions(+), 1 deletion(-)
+
+--- a/src/ap/dfs.c
++++ b/src/ap/dfs.c
+@@ -17,6 +17,7 @@
+ #include "ap_drv_ops.h"
+ #include "drivers/driver.h"
+ #include "dfs.h"
++#include "crypto/crypto.h"
+ 
+ 
+ enum dfs_channel_type {
+@@ -526,9 +527,14 @@ dfs_get_valid_channel(struct hostapd_ifa
+ 	int num_available_chandefs;
+ 	int chan_idx, chan_idx2;
+ 	int sec_chan_idx_80p80 = -1;
++	bool is_mesh = false;
+ 	int i;
+ 	u32 _rand;
+ 
++#ifdef CONFIG_MESH
++	is_mesh = iface->mconf;
++#endif
++
+ 	wpa_printf(MSG_DEBUG, "DFS: Selecting random channel");
+ 	*secondary_channel = 0;
+ 	*oper_centr_freq_seg0_idx = 0;
+@@ -548,8 +554,20 @@ dfs_get_valid_channel(struct hostapd_ifa
+ 	if (num_available_chandefs == 0)
+ 		return NULL;
+ 
+-	if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
++	/* try to use deterministic channel in mesh, so that both sides
++	 * have a chance to switch to the same channel */
++	if (is_mesh) {
++#ifdef CONFIG_MESH
++		u64 hash[4];
++		const u8 *meshid[1] = { &iface->mconf->meshid[0] };
++		const size_t meshid_len = iface->mconf->meshid_len;
++
++		sha256_vector(1, meshid, &meshid_len, (u8 *)&hash[0]);
++		_rand = hash[0] + hash[1] + hash[2] + hash[3];
++#endif
++	} else if (os_get_random((u8 *) &_rand, sizeof(_rand)) < 0)
+ 		return NULL;
++
+ 	chan_idx = _rand % num_available_chandefs;
+ 	dfs_find_channel(iface, &chan, chan_idx, type);
+ 	if (!chan) {
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -11017,6 +11017,10 @@ static int nl80211_switch_channel(void *
+ 	if (ret)
+ 		goto error;
+ 
++	if (drv->nlmode == NL80211_IFTYPE_MESH_POINT) {
++		nla_put_flag(msg, NL80211_ATTR_HANDLE_DFS);
++	}
++
+ 	/* beacon_csa params */
+ 	beacon_csa = nla_nest_start(msg, NL80211_ATTR_CSA_IES);
+ 	if (!beacon_csa)

feeds/hostapd/hostapd/patches/022-hostapd-fix-use-of-uninitialized-stack-variables.patch

@@ -0,0 +1,25 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 8 Jul 2021 16:33:03 +0200
+Subject: [PATCH] hostapd: fix use of uninitialized stack variables
+
+When a CSA is performed on an 80 MHz channel, hostapd_change_config_freq
+unconditionally calls hostapd_set_oper_centr_freq_seg0/1_idx with seg0/1
+filled by ieee80211_freq_to_chan.
+However, if ieee80211_freq_to_chan fails (because the freq is 0 or invalid),
+seg0/1 remains uninitialized and filled with stack garbage, causing errors
+such as "hostapd: 80 MHz: center segment 1 configured"
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -3764,7 +3764,7 @@ static int hostapd_change_config_freq(st
+ 				      struct hostapd_freq_params *old_params)
+ {
+ 	int channel;
+-	u8 seg0, seg1;
++	u8 seg0 = 0, seg1 = 0;
+ 	struct hostapd_hw_modes *mode;
+ 
+ 	if (!params->channel) {

feeds/hostapd/hostapd/patches/030-driver_nl80211-rewrite-neigh-code-to-not-depend-on-l.patch

@@ -0,0 +1,275 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 28 Jul 2021 05:49:46 +0200
+Subject: [PATCH] driver_nl80211: rewrite neigh code to not depend on
+ libnl3-route
+
+Removes an unnecessary dependency and also makes the code smaller
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -16,9 +16,6 @@
+ #include <net/if.h>
+ #include <netlink/genl/genl.h>
+ #include <netlink/genl/ctrl.h>
+-#ifdef CONFIG_LIBNL3_ROUTE
+-#include <netlink/route/neighbour.h>
+-#endif /* CONFIG_LIBNL3_ROUTE */
+ #include <linux/rtnetlink.h>
+ #include <netpacket/packet.h>
+ #include <linux/errqueue.h>
+@@ -5783,26 +5780,29 @@ fail:
+ 
+ static void rtnl_neigh_delete_fdb_entry(struct i802_bss *bss, const u8 *addr)
+ {
+-#ifdef CONFIG_LIBNL3_ROUTE
+ 	struct wpa_driver_nl80211_data *drv = bss->drv;
+-	struct rtnl_neigh *rn;
+-	struct nl_addr *nl_addr;
++	struct ndmsg nhdr = {
++		.ndm_state = NUD_PERMANENT,
++		.ndm_ifindex = bss->ifindex,
++		.ndm_family = AF_BRIDGE,
++	};
++	struct nl_msg *msg;
+ 	int err;
+ 
+-	rn = rtnl_neigh_alloc();
+-	if (!rn)
++	msg = nlmsg_alloc_simple(RTM_DELNEIGH, NLM_F_CREATE);
++	if (!msg)
+ 		return;
+ 
+-	rtnl_neigh_set_family(rn, AF_BRIDGE);
+-	rtnl_neigh_set_ifindex(rn, bss->ifindex);
+-	nl_addr = nl_addr_build(AF_BRIDGE, (void *) addr, ETH_ALEN);
+-	if (!nl_addr) {
+-		rtnl_neigh_put(rn);
+-		return;
+-	}
+-	rtnl_neigh_set_lladdr(rn, nl_addr);
++	if (nlmsg_append(msg, &nhdr, sizeof(nhdr), NLMSG_ALIGNTO) < 0)
++		goto errout;
++
++	if (nla_put(msg, NDA_LLADDR, ETH_ALEN, (void *)addr))
++		goto errout;
++
++	if (nl_send_auto_complete(drv->rtnl_sk, msg) < 0)
++		goto errout;
+ 
+-	err = rtnl_neigh_delete(drv->rtnl_sk, rn, 0);
++	err = nl_wait_for_ack(drv->rtnl_sk);
+ 	if (err < 0) {
+ 		wpa_printf(MSG_DEBUG, "nl80211: bridge FDB entry delete for "
+ 			   MACSTR " ifindex=%d failed: %s", MAC2STR(addr),
+@@ -5812,9 +5812,8 @@ static void rtnl_neigh_delete_fdb_entry(
+ 			   MACSTR, MAC2STR(addr));
+ 	}
+ 
+-	nl_addr_put(nl_addr);
+-	rtnl_neigh_put(rn);
+-#endif /* CONFIG_LIBNL3_ROUTE */
++errout:
++	nlmsg_free(msg);
+ }
+ 
+ 
+@@ -8492,7 +8491,6 @@ static void *i802_init(struct hostapd_da
+ 	    (params->num_bridge == 0 || !params->bridge[0]))
+ 		add_ifidx(drv, br_ifindex, drv->ifindex);
+ 
+-#ifdef CONFIG_LIBNL3_ROUTE
+ 	if (bss->added_if_into_bridge || bss->already_in_bridge) {
+ 		int err;
+ 
+@@ -8509,7 +8507,6 @@ static void *i802_init(struct hostapd_da
+ 			goto failed;
+ 		}
+ 	}
+-#endif /* CONFIG_LIBNL3_ROUTE */
+ 
+ 	if (drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) {
+ 		wpa_printf(MSG_DEBUG,
+@@ -11883,13 +11880,14 @@ static int wpa_driver_br_add_ip_neigh(vo
+ 				      const u8 *ipaddr, int prefixlen,
+ 				      const u8 *addr)
+ {
+-#ifdef CONFIG_LIBNL3_ROUTE
+ 	struct i802_bss *bss = priv;
+ 	struct wpa_driver_nl80211_data *drv = bss->drv;
+-	struct rtnl_neigh *rn;
+-	struct nl_addr *nl_ipaddr = NULL;
+-	struct nl_addr *nl_lladdr = NULL;
+-	int family, addrsize;
++	struct ndmsg nhdr = {
++		.ndm_state = NUD_PERMANENT,
++		.ndm_ifindex = bss->br_ifindex,
++	};
++	struct nl_msg *msg;
++	int addrsize;
+ 	int res;
+ 
+ 	if (!ipaddr || prefixlen == 0 || !addr)
+@@ -11908,85 +11906,66 @@ static int wpa_driver_br_add_ip_neigh(vo
+ 	}
+ 
+ 	if (version == 4) {
+-		family = AF_INET;
++		nhdr.ndm_family = AF_INET;
+ 		addrsize = 4;
+ 	} else if (version == 6) {
+-		family = AF_INET6;
++		nhdr.ndm_family = AF_INET6;
+ 		addrsize = 16;
+ 	} else {
+ 		return -EINVAL;
+ 	}
+ 
+-	rn = rtnl_neigh_alloc();
+-	if (rn == NULL)
++	msg = nlmsg_alloc_simple(RTM_NEWNEIGH, NLM_F_CREATE);
++	if (!msg)
+ 		return -ENOMEM;
+ 
+-	/* set the destination ip address for neigh */
+-	nl_ipaddr = nl_addr_build(family, (void *) ipaddr, addrsize);
+-	if (nl_ipaddr == NULL) {
+-		wpa_printf(MSG_DEBUG, "nl80211: nl_ipaddr build failed");
+-		res = -ENOMEM;
++	res = -ENOMEM;
++	if (nlmsg_append(msg, &nhdr, sizeof(nhdr), NLMSG_ALIGNTO) < 0)
+ 		goto errout;
+-	}
+-	nl_addr_set_prefixlen(nl_ipaddr, prefixlen);
+-	res = rtnl_neigh_set_dst(rn, nl_ipaddr);
+-	if (res) {
+-		wpa_printf(MSG_DEBUG,
+-			   "nl80211: neigh set destination addr failed");
++
++	if (nla_put(msg, NDA_DST, addrsize, (void *)ipaddr))
+ 		goto errout;
+-	}
+ 
+-	/* set the corresponding lladdr for neigh */
+-	nl_lladdr = nl_addr_build(AF_BRIDGE, (u8 *) addr, ETH_ALEN);
+-	if (nl_lladdr == NULL) {
+-		wpa_printf(MSG_DEBUG, "nl80211: neigh set lladdr failed");
+-		res = -ENOMEM;
++	if (nla_put(msg, NDA_LLADDR, ETH_ALEN, (void *)addr))
+ 		goto errout;
+-	}
+-	rtnl_neigh_set_lladdr(rn, nl_lladdr);
+ 
+-	rtnl_neigh_set_ifindex(rn, bss->br_ifindex);
+-	rtnl_neigh_set_state(rn, NUD_PERMANENT);
++	res = nl_send_auto_complete(drv->rtnl_sk, msg);
++	if (res < 0)
++		goto errout;
+ 
+-	res = rtnl_neigh_add(drv->rtnl_sk, rn, NLM_F_CREATE);
++	res = nl_wait_for_ack(drv->rtnl_sk);
+ 	if (res) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "nl80211: Adding bridge ip neigh failed: %s",
+ 			   nl_geterror(res));
+ 	}
+ errout:
+-	if (nl_lladdr)
+-		nl_addr_put(nl_lladdr);
+-	if (nl_ipaddr)
+-		nl_addr_put(nl_ipaddr);
+-	if (rn)
+-		rtnl_neigh_put(rn);
++	nlmsg_free(msg);
+ 	return res;
+-#else /* CONFIG_LIBNL3_ROUTE */
+-	return -1;
+-#endif /* CONFIG_LIBNL3_ROUTE */
+ }
+ 
+ 
+ static int wpa_driver_br_delete_ip_neigh(void *priv, u8 version,
+ 					 const u8 *ipaddr)
+ {
+-#ifdef CONFIG_LIBNL3_ROUTE
+ 	struct i802_bss *bss = priv;
+ 	struct wpa_driver_nl80211_data *drv = bss->drv;
+-	struct rtnl_neigh *rn;
+-	struct nl_addr *nl_ipaddr;
+-	int family, addrsize;
++	struct ndmsg nhdr = {
++		.ndm_state = NUD_PERMANENT,
++		.ndm_ifindex = bss->br_ifindex,
++	};
++	struct nl_msg *msg;
++	int addrsize;
+ 	int res;
+ 
+ 	if (!ipaddr)
+ 		return -EINVAL;
+ 
+ 	if (version == 4) {
+-		family = AF_INET;
++		nhdr.ndm_family = AF_INET;
+ 		addrsize = 4;
+ 	} else if (version == 6) {
+-		family = AF_INET6;
++		nhdr.ndm_family = AF_INET6;
+ 		addrsize = 16;
+ 	} else {
+ 		return -EINVAL;
+@@ -12004,41 +11983,30 @@ static int wpa_driver_br_delete_ip_neigh
+ 		return -1;
+ 	}
+ 
+-	rn = rtnl_neigh_alloc();
+-	if (rn == NULL)
++	msg = nlmsg_alloc_simple(RTM_DELNEIGH, NLM_F_CREATE);
++	if (!msg)
+ 		return -ENOMEM;
+ 
+-	/* set the destination ip address for neigh */
+-	nl_ipaddr = nl_addr_build(family, (void *) ipaddr, addrsize);
+-	if (nl_ipaddr == NULL) {
+-		wpa_printf(MSG_DEBUG, "nl80211: nl_ipaddr build failed");
+-		res = -ENOMEM;
++	res = -ENOMEM;
++	if (nlmsg_append(msg, &nhdr, sizeof(nhdr), NLMSG_ALIGNTO) < 0)
+ 		goto errout;
+-	}
+-	res = rtnl_neigh_set_dst(rn, nl_ipaddr);
+-	if (res) {
+-		wpa_printf(MSG_DEBUG,
+-			   "nl80211: neigh set destination addr failed");
++
++	if (nla_put(msg, NDA_DST, addrsize, (void *)ipaddr))
+ 		goto errout;
+-	}
+ 
+-	rtnl_neigh_set_ifindex(rn, bss->br_ifindex);
++	res = nl_send_auto_complete(drv->rtnl_sk, msg);
++	if (res < 0)
++		goto errout;
+ 
+-	res = rtnl_neigh_delete(drv->rtnl_sk, rn, 0);
++	res = nl_wait_for_ack(drv->rtnl_sk);
+ 	if (res) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "nl80211: Deleting bridge ip neigh failed: %s",
+ 			   nl_geterror(res));
+ 	}
+ errout:
+-	if (nl_ipaddr)
+-		nl_addr_put(nl_ipaddr);
+-	if (rn)
+-		rtnl_neigh_put(rn);
++	nlmsg_free(msg);
+ 	return res;
+-#else /* CONFIG_LIBNL3_ROUTE */
+-	return -1;
+-#endif /* CONFIG_LIBNL3_ROUTE */
+ }
+ 
+ 

feeds/hostapd/hostapd/patches/040-mesh-allow-processing-authentication-frames-in-block.patch

@@ -0,0 +1,34 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Mon, 18 Feb 2019 12:57:11 +0100
+Subject: [PATCH] mesh: allow processing authentication frames in blocked state
+
+If authentication fails repeatedly e.g. because of a weak signal, the link
+can end up in blocked state. If one of the nodes tries to establish a link
+again before it is unblocked on the other side, it will block the link to
+that other side. The same happens on the other side when it unblocks the
+link. In that scenario, the link never recovers on its own.
+
+To fix this, allow restarting authentication even if the link is in blocked
+state, but don't initiate the attempt until the blocked period is over.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/src/ap/ieee802_11.c
++++ b/src/ap/ieee802_11.c
+@@ -3020,15 +3020,6 @@ static void handle_auth(struct hostapd_d
+ 				       seq_ctrl);
+ 			return;
+ 		}
+-#ifdef CONFIG_MESH
+-		if ((hapd->conf->mesh & MESH_ENABLED) &&
+-		    sta->plink_state == PLINK_BLOCKED) {
+-			wpa_printf(MSG_DEBUG, "Mesh peer " MACSTR
+-				   " is blocked - drop Authentication frame",
+-				   MAC2STR(sa));
+-			return;
+-		}
+-#endif /* CONFIG_MESH */
+ #ifdef CONFIG_PASN
+ 		if (auth_alg == WLAN_AUTH_PASN &&
+ 		    (sta->flags & WLAN_STA_ASSOC)) {

feeds/hostapd/hostapd/patches/170-hostapd-update-cfs0-and-cfs1-for-160MHz.patch

@@ -0,0 +1,141 @@
+From d4c4ef302f98fd6bce173b8636e7e350d8b44981 Mon Sep 17 00:00:00 2001
+From: P Praneesh <ppranees@codeaurora.org>
+Date: Fri, 19 Mar 2021 12:17:27 +0530
+Subject: [PATCH] hostapd: update cfs0 and cfs1 for 160MHz
+
+As per standard Draft P802.11ax_D8.0,( Table 26-9—Setting
+of the VHT Channel Width and VHT NSS at an HE STA
+transmitting the OM Control subfield ), center frequency of
+160MHz should be published in HT information subset 2 of
+HT information when EXT NSS BW field is enabled.
+
+If the supported number of NSS in 160MHz is at least max NSS
+support, then center_freq_seg0 indicates the center frequency of 80MHz and
+center_freq_seg1 indicates the center frequency of 160MHz.
+
+If the supported number of NSS in 160MHz is less than max NSS
+support, then center_freq_seg0 indicates the center frequency of 80MHz and
+center_freq_seg1 is 0. The center frequency of 160MHz is published in HT
+operation information element instead.
+
+Signed-off-by: P Praneesh <ppranees@codeaurora.org>
+---
+ hostapd/config_file.c           |  2 ++
+ src/ap/ieee802_11_ht.c          |  7 +++++++
+ src/ap/ieee802_11_vht.c         | 16 ++++++++++++++++
+ src/common/hw_features_common.c |  1 +
+ src/common/ieee802_11_defs.h    |  1 +
+ 5 files changed, 27 insertions(+)
+
+--- a/hostapd/config_file.c
++++ b/hostapd/config_file.c
+@@ -1153,6 +1153,8 @@ static int hostapd_config_vht_capab(stru
+ 		conf->vht_capab |= VHT_CAP_RX_ANTENNA_PATTERN;
+ 	if (os_strstr(capab, "[TX-ANTENNA-PATTERN]"))
+ 		conf->vht_capab |= VHT_CAP_TX_ANTENNA_PATTERN;
++	if (os_strstr(capab, "[EXT-NSS-BW-SUPP]"))
++		conf->vht_capab |= VHT_CAP_EXTENDED_NSS_BW_SUPPORT;
+ 	return 0;
+ }
+ #endif /* CONFIG_IEEE80211AC */
+--- a/src/ap/ieee802_11_ht.c
++++ b/src/ap/ieee802_11_ht.c
+@@ -82,7 +82,9 @@ u8 * hostapd_eid_ht_capabilities(struct
+ u8 * hostapd_eid_ht_operation(struct hostapd_data *hapd, u8 *eid)
+ {
+ 	struct ieee80211_ht_operation *oper;
++	le32 vht_capabilities_info;
+ 	u8 *pos = eid;
++	u8 chwidth;
+ 
+ 	if (!hapd->iconf->ieee80211n || hapd->conf->disable_11n ||
+ 	    is_6ghz_op_class(hapd->iconf->op_class))
+@@ -103,6 +105,13 @@ u8 * hostapd_eid_ht_operation(struct hos
+ 		oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW |
+ 			HT_INFO_HT_PARAM_STA_CHNL_WIDTH;
+ 
++	vht_capabilities_info = host_to_le32(hapd->iface->current_mode->vht_capab);
++	chwidth = hostapd_get_oper_chwidth(hapd->iconf);
++	if (vht_capabilities_info & VHT_CAP_EXTENDED_NSS_BW_SUPPORT
++		&& ((chwidth == CHANWIDTH_160MHZ) || (chwidth == CHANWIDTH_80P80MHZ))) {
++		oper->operation_mode = host_to_le16(hapd->iconf->vht_oper_centr_freq_seg0_idx << 5);
++	}
++
+ 	pos += sizeof(*oper);
+ 
+ 	return pos;
+--- a/src/ap/ieee802_11_vht.c
++++ b/src/ap/ieee802_11_vht.c
+@@ -25,6 +25,7 @@ u8 * hostapd_eid_vht_capabilities(struct
+ 	struct ieee80211_vht_capabilities *cap;
+ 	struct hostapd_hw_modes *mode = hapd->iface->current_mode;
+ 	u8 *pos = eid;
++	u8 chwidth;
+ 
+ 	if (!mode || is_6ghz_op_class(hapd->iconf->op_class))
+ 		return eid;
+@@ -62,6 +63,17 @@ u8 * hostapd_eid_vht_capabilities(struct
+ 			host_to_le32(nsts << VHT_CAP_BEAMFORMEE_STS_OFFSET);
+ 	}
+ 
++	chwidth = hostapd_get_oper_chwidth(hapd->iconf);
++	if (((host_to_le32(mode->vht_capab)) & VHT_CAP_EXTENDED_NSS_BW_SUPPORT)
++		&& ((chwidth == CHANWIDTH_160MHZ) || (chwidth == CHANWIDTH_80P80MHZ))) {
++		cap->vht_capabilities_info |= VHT_CAP_EXTENDED_NSS_BW_SUPPORT;
++		cap->vht_capabilities_info &= ~(host_to_le32(VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ));
++		cap->vht_capabilities_info &= ~(host_to_le32(VHT_CAP_SUPP_CHAN_WIDTH_160MHZ));
++		cap->vht_capabilities_info &= ~(host_to_le32(VHT_CAP_SUPP_CHAN_WIDTH_MASK));
++	} else {
++		cap->vht_capabilities_info &= ~VHT_CAP_EXTENDED_NSS_BW_SUPPORT_MASK;
++	}
++
+ 	/* Supported MCS set comes from hw */
+ 	os_memcpy(&cap->vht_supported_mcs_set, mode->vht_mcs_set, 8);
+ 
+@@ -74,6 +86,7 @@ u8 * hostapd_eid_vht_capabilities(struct
+ u8 * hostapd_eid_vht_operation(struct hostapd_data *hapd, u8 *eid)
+ {
+ 	struct ieee80211_vht_operation *oper;
++	le32 vht_capabilities_info;
+ 	u8 *pos = eid;
+ 	enum oper_chan_width oper_chwidth =
+ 		hostapd_get_oper_chwidth(hapd->iconf);
+@@ -106,6 +119,7 @@ u8 * hostapd_eid_vht_operation(struct ho
+ 	oper->vht_op_info_chan_center_freq_seg1_idx = seg1;
+ 
+ 	oper->vht_op_info_chwidth = oper_chwidth;
++	vht_capabilities_info = host_to_le32(hapd->iface->current_mode->vht_capab);
+ 	if (oper_chwidth == CONF_OPER_CHWIDTH_160MHZ) {
+ 		/*
+ 		 * Convert 160 MHz channel width to new style as interop
+@@ -119,6 +133,9 @@ u8 * hostapd_eid_vht_operation(struct ho
+ 			oper->vht_op_info_chan_center_freq_seg0_idx -= 8;
+ 		else
+ 			oper->vht_op_info_chan_center_freq_seg0_idx += 8;
++
++		if (vht_capabilities_info & VHT_CAP_EXTENDED_NSS_BW_SUPPORT)
++			oper->vht_op_info_chan_center_freq_seg1_idx = 0;
+ 	} else if (oper_chwidth == CONF_OPER_CHWIDTH_80P80MHZ) {
+ 		/*
+ 		 * Convert 80+80 MHz channel width to new style as interop
+--- a/src/common/hw_features_common.c
++++ b/src/common/hw_features_common.c
+@@ -811,6 +811,7 @@ int ieee80211ac_cap_check(u32 hw, u32 co
+ 	VHT_CAP_CHECK(VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB);
+ 	VHT_CAP_CHECK(VHT_CAP_RX_ANTENNA_PATTERN);
+ 	VHT_CAP_CHECK(VHT_CAP_TX_ANTENNA_PATTERN);
++	VHT_CAP_CHECK(VHT_CAP_EXTENDED_NSS_BW_SUPPORT);
+ 
+ #undef VHT_CAP_CHECK
+ #undef VHT_CAP_CHECK_MAX
+--- a/src/common/ieee802_11_defs.h
++++ b/src/common/ieee802_11_defs.h
+@@ -1349,6 +1349,8 @@ struct ieee80211_ampe_ie {
+ #define VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB     ((u32) BIT(26) | BIT(27))
+ #define VHT_CAP_RX_ANTENNA_PATTERN                  ((u32) BIT(28))
+ #define VHT_CAP_TX_ANTENNA_PATTERN                  ((u32) BIT(29))
++#define VHT_CAP_EXTENDED_NSS_BW_SUPPORT		    ((u32) BIT(30))
++#define VHT_CAP_EXTENDED_NSS_BW_SUPPORT_MASK	    ((u32) BIT(30) | BIT(31))
+ 
+ #define VHT_OPMODE_CHANNEL_WIDTH_MASK		    ((u8) BIT(0) | BIT(1))
+ #define VHT_OPMODE_CHANNEL_RxNSS_MASK		    ((u8) BIT(4) | BIT(5) | \

feeds/hostapd/hostapd/patches/301-mesh-noscan.patch

@@ -0,0 +1,71 @@
+--- a/wpa_supplicant/config.c
++++ b/wpa_supplicant/config.c
+@@ -2600,6 +2600,7 @@ static const struct parse_data ssid_fiel
+ #else /* CONFIG_MESH */
+ 	{ INT_RANGE(mode, 0, 4) },
+ #endif /* CONFIG_MESH */
++	{ INT_RANGE(noscan, 0, 1) },
+ 	{ INT_RANGE(proactive_key_caching, 0, 1) },
+ 	{ INT_RANGE(disabled, 0, 2) },
+ 	{ STR(id_str) },
+--- a/wpa_supplicant/config_file.c
++++ b/wpa_supplicant/config_file.c
+@@ -775,6 +775,7 @@ static void wpa_config_write_network(FIL
+ #endif /* IEEE8021X_EAPOL */
+ 	INT(mode);
+ 	INT(no_auto_peer);
++	INT(noscan);
+ 	INT(mesh_fwding);
+ 	INT(frequency);
+ 	INT(enable_edmg);
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -506,6 +506,8 @@ static int wpa_supplicant_mesh_init(stru
+ 			   frequency);
+ 		goto out_free;
+ 	}
++	if (ssid->noscan)
++		conf->noscan = 1;
+ 
+ 	if (ssid->mesh_basic_rates == NULL) {
+ 		/*
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -2710,7 +2710,7 @@ static bool ibss_mesh_can_use_vht(struct
+ 				  const struct wpa_ssid *ssid,
+ 				  struct hostapd_hw_modes *mode)
+ {
+-	if (mode->mode != HOSTAPD_MODE_IEEE80211A)
++	if (mode->mode != HOSTAPD_MODE_IEEE80211A && !(ssid->noscan))
+ 		return false;
+ 
+ 	if (!drv_supports_vht(wpa_s, ssid))
+@@ -2783,7 +2783,7 @@ static void ibss_mesh_select_40mhz(struc
+ 	int i, res;
+ 	unsigned int j;
+ 	static const int ht40plus[] = {
+-		36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157, 165, 173,
++		1, 2, 3, 4, 5, 6, 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157, 165, 173,
+ 		184, 192
+ 	};
+ 	int ht40 = -1;
+@@ -3033,7 +3033,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 	int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
+ 	enum hostapd_hw_mode hw_mode;
+ 	struct hostapd_hw_modes *mode = NULL;
+-	int i, obss_scan = 1;
++	int i, obss_scan = !(ssid->noscan);
+ 	u8 channel;
+ 	bool is_6ghz;
+ 	bool dfs_enabled = wpa_s->conf->country[0] && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
+--- a/wpa_supplicant/config_ssid.h
++++ b/wpa_supplicant/config_ssid.h
+@@ -1035,6 +1035,8 @@ struct wpa_ssid {
+ 	 */
+ 	int no_auto_peer;
+ 
++	int noscan;
++
+ 	/**
+ 	 * mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm)
+ 	 *

feeds/hostapd/hostapd/patches/310-rescan_immediately.patch

@@ -0,0 +1,11 @@
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -5767,7 +5767,7 @@ wpa_supplicant_alloc(struct wpa_supplica
+ 	if (wpa_s == NULL)
+ 		return NULL;
+ 	wpa_s->scan_req = INITIAL_SCAN_REQ;
+-	wpa_s->scan_interval = 5;
++	wpa_s->scan_interval = 1;
+ 	wpa_s->new_connection = 1;
+ 	wpa_s->parent = parent ? parent : wpa_s;
+ 	wpa_s->p2pdev = wpa_s->parent;

feeds/hostapd/hostapd/patches/341-mesh-ctrl-iface-channel-switch.patch

@@ -0,0 +1,39 @@
+--- a/wpa_supplicant/ap.c
++++ b/wpa_supplicant/ap.c
+@@ -1825,15 +1825,35 @@ int ap_switch_channel(struct wpa_supplic
+ 
+ 
+ #ifdef CONFIG_CTRL_IFACE
++
++static int __ap_ctrl_iface_chanswitch(struct hostapd_iface *iface,
++				      struct csa_settings *settings)
++{
++#ifdef NEED_AP_MLME
++	if (!iface || !iface->bss[0])
++		return 0;
++
++	return hostapd_switch_channel(iface->bss[0], settings);
++#else
++	return -1;
++#endif
++}
++
++
+ int ap_ctrl_iface_chanswitch(struct wpa_supplicant *wpa_s, const char *pos)
+ {
+ 	struct csa_settings settings;
+ 	int ret = hostapd_parse_csa_settings(pos, &settings);
+ 
++	if (!(wpa_s->ap_iface && wpa_s->ap_iface->bss[0]) &&
++	    !(wpa_s->ifmsh && wpa_s->ifmsh->bss[0]))
++		return -1;
++
++	ret = __ap_ctrl_iface_chanswitch(wpa_s->ap_iface, &settings);
+ 	if (ret)
+ 		return ret;
+ 
+-	return ap_switch_channel(wpa_s, &settings);
++	return __ap_ctrl_iface_chanswitch(wpa_s->ifmsh, &settings);
+ }
+ #endif /* CONFIG_CTRL_IFACE */
+ 

feeds/hostapd/hostapd/patches/350-nl80211_del_beacon_bss.patch

@@ -0,0 +1,35 @@
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -3008,12 +3008,12 @@ static int wpa_driver_nl80211_del_beacon
+ 		return 0;
+ 
+ 	wpa_printf(MSG_DEBUG, "nl80211: Remove beacon (ifindex=%d)",
+-		   drv->ifindex);
++		   bss->ifindex);
+ 	link->beacon_set = 0;
+ 	link->freq = 0;
+ 
+ 	nl80211_put_wiphy_data_ap(bss);
+-	msg = nl80211_drv_msg(drv, 0, NL80211_CMD_DEL_BEACON);
++	msg = nl80211_bss_msg(bss, 0, NL80211_CMD_DEL_BEACON);
+ 	if (!msg)
+ 		return -ENOBUFS;
+ 
+@@ -6100,7 +6100,7 @@ static void nl80211_teardown_ap(struct i
+ 		nl80211_mgmt_unsubscribe(bss, "AP teardown");
+ 
+ 	nl80211_put_wiphy_data_ap(bss);
+-	bss->flink->beacon_set = 0;
++	wpa_driver_nl80211_del_beacon_all(bss);
+ }
+ 
+ 
+@@ -8859,8 +8859,6 @@ static int wpa_driver_nl80211_if_remove(
+ 	} else {
+ 		wpa_printf(MSG_DEBUG, "nl80211: First BSS - reassign context");
+ 		nl80211_teardown_ap(bss);
+-		if (!bss->added_if && !drv->first_bss->next)
+-			wpa_driver_nl80211_del_beacon_all(bss);
+ 		nl80211_destroy_bss(bss);
+ 		if (!bss->added_if)
+ 			i802_set_iface_flags(bss, 0);

feeds/hostapd/hostapd/patches/380-disable_ctrl_iface_mib.patch

@@ -0,0 +1,239 @@
+--- a/hostapd/Makefile
++++ b/hostapd/Makefile
+@@ -221,6 +221,9 @@ endif
+ ifdef CONFIG_NO_CTRL_IFACE
+ CFLAGS += -DCONFIG_NO_CTRL_IFACE
+ else
++ifdef CONFIG_CTRL_IFACE_MIB
++CFLAGS += -DCONFIG_CTRL_IFACE_MIB
++endif
+ ifeq ($(CONFIG_CTRL_IFACE), udp)
+ CFLAGS += -DCONFIG_CTRL_IFACE_UDP
+ else
+--- a/hostapd/ctrl_iface.c
++++ b/hostapd/ctrl_iface.c
+@@ -3314,6 +3314,7 @@ static int hostapd_ctrl_iface_receive_pr
+ 						      reply_size);
+ 	} else if (os_strcmp(buf, "STATUS-DRIVER") == 0) {
+ 		reply_len = hostapd_drv_status(hapd, reply, reply_size);
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 	} else if (os_strcmp(buf, "MIB") == 0) {
+ 		reply_len = ieee802_11_get_mib(hapd, reply, reply_size);
+ 		if (reply_len >= 0) {
+@@ -3355,6 +3356,7 @@ static int hostapd_ctrl_iface_receive_pr
+ 	} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
+ 		reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply,
+ 							reply_size);
++#endif
+ 	} else if (os_strcmp(buf, "ATTACH") == 0) {
+ 		if (hostapd_ctrl_iface_attach(hapd, from, fromlen, NULL))
+ 			reply_len = -1;
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -983,6 +983,9 @@ ifdef CONFIG_FILS
+ OBJS += ../src/ap/fils_hlp.o
+ endif
+ ifdef CONFIG_CTRL_IFACE
++ifdef CONFIG_CTRL_IFACE_MIB
++CFLAGS += -DCONFIG_CTRL_IFACE_MIB
++endif
+ OBJS += ../src/ap/ctrl_iface_ap.o
+ endif
+ 
+--- a/wpa_supplicant/ctrl_iface.c
++++ b/wpa_supplicant/ctrl_iface.c
+@@ -2326,7 +2326,7 @@ static int wpa_supplicant_ctrl_iface_sta
+ 			pos += ret;
+ 		}
+ 
+-#ifdef CONFIG_AP
++#if defined(CONFIG_AP) && defined(CONFIG_CTRL_IFACE_MIB)
+ 		if (wpa_s->ap_iface) {
+ 			pos += ap_ctrl_iface_wpa_get_status(wpa_s, pos,
+ 							    end - pos,
+@@ -12087,6 +12087,7 @@ char * wpa_supplicant_ctrl_iface_process
+ 			reply_len = -1;
+ 	} else if (os_strncmp(buf, "NOTE ", 5) == 0) {
+ 		wpa_printf(MSG_INFO, "NOTE: %s", buf + 5);
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 	} else if (os_strcmp(buf, "MIB") == 0) {
+ 		reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size);
+ 		if (reply_len >= 0) {
+@@ -12099,6 +12100,7 @@ char * wpa_supplicant_ctrl_iface_process
+ 				reply_size - reply_len);
+ #endif /* CONFIG_MACSEC */
+ 		}
++#endif
+ 	} else if (os_strncmp(buf, "STATUS", 6) == 0) {
+ 		reply_len = wpa_supplicant_ctrl_iface_status(
+ 			wpa_s, buf + 6, reply, reply_size);
+@@ -12587,6 +12589,7 @@ char * wpa_supplicant_ctrl_iface_process
+ 		reply_len = wpa_supplicant_ctrl_iface_bss(
+ 			wpa_s, buf + 4, reply, reply_size);
+ #ifdef CONFIG_AP
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 	} else if (os_strcmp(buf, "STA-FIRST") == 0) {
+ 		reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size);
+ 	} else if (os_strncmp(buf, "STA ", 4) == 0) {
+@@ -12595,12 +12598,15 @@ char * wpa_supplicant_ctrl_iface_process
+ 	} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
+ 		reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply,
+ 						   reply_size);
++#endif
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 	} else if (os_strncmp(buf, "DEAUTHENTICATE ", 15) == 0) {
+ 		if (ap_ctrl_iface_sta_deauthenticate(wpa_s, buf + 15))
+ 			reply_len = -1;
+ 	} else if (os_strncmp(buf, "DISASSOCIATE ", 13) == 0) {
+ 		if (ap_ctrl_iface_sta_disassociate(wpa_s, buf + 13))
+ 			reply_len = -1;
++#endif
+ 	} else if (os_strncmp(buf, "CHAN_SWITCH ", 12) == 0) {
+ 		if (ap_ctrl_iface_chanswitch(wpa_s, buf + 12))
+ 			reply_len = -1;
+--- a/src/ap/ctrl_iface_ap.c
++++ b/src/ap/ctrl_iface_ap.c
+@@ -26,6 +26,26 @@
+ #include "taxonomy.h"
+ #include "wnm_ap.h"
+ 
++static const char * hw_mode_str(enum hostapd_hw_mode mode)
++{
++	switch (mode) {
++	case HOSTAPD_MODE_IEEE80211B:
++		return "b";
++	case HOSTAPD_MODE_IEEE80211G:
++		return "g";
++	case HOSTAPD_MODE_IEEE80211A:
++		return "a";
++	case HOSTAPD_MODE_IEEE80211AD:
++		return "ad";
++	case HOSTAPD_MODE_IEEE80211ANY:
++		return "any";
++	case NUM_HOSTAPD_MODES:
++		return "invalid";
++	}
++	return "unknown";
++}
++
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 
+ static size_t hostapd_write_ht_mcs_bitmask(char *buf, size_t buflen,
+ 					   size_t curr_len, const u8 *mcs_set)
+@@ -212,26 +232,6 @@ static const char * timeout_next_str(int
+ }
+ 
+ 
+-static const char * hw_mode_str(enum hostapd_hw_mode mode)
+-{
+-	switch (mode) {
+-	case HOSTAPD_MODE_IEEE80211B:
+-		return "b";
+-	case HOSTAPD_MODE_IEEE80211G:
+-		return "g";
+-	case HOSTAPD_MODE_IEEE80211A:
+-		return "a";
+-	case HOSTAPD_MODE_IEEE80211AD:
+-		return "ad";
+-	case HOSTAPD_MODE_IEEE80211ANY:
+-		return "any";
+-	case NUM_HOSTAPD_MODES:
+-		return "invalid";
+-	}
+-	return "unknown";
+-}
+-
+-
+ static int hostapd_ctrl_iface_sta_mib(struct hostapd_data *hapd,
+ 				      struct sta_info *sta,
+ 				      char *buf, size_t buflen)
+@@ -493,6 +493,7 @@ int hostapd_ctrl_iface_sta_next(struct h
+ 	return hostapd_ctrl_iface_sta_mib(hapd, sta->next, buf, buflen);
+ }
+ 
++#endif
+ 
+ #ifdef CONFIG_P2P_MANAGER
+ static int p2p_manager_disconnect(struct hostapd_data *hapd, u16 stype,
+@@ -884,12 +885,12 @@ int hostapd_ctrl_iface_status(struct hos
+ 			return len;
+ 		len += ret;
+ 	}
+-
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 	if (iface->conf->ieee80211n && !hapd->conf->disable_11n && mode) {
+ 		len = hostapd_write_ht_mcs_bitmask(buf, buflen, len,
+ 						   mode->mcs_set);
+ 	}
+-
++#endif /* CONFIG_CTRL_IFACE_MIB */
+ 	if (iface->current_rates && iface->num_rates) {
+ 		ret = os_snprintf(buf + len, buflen - len, "supported_rates=");
+ 		if (os_snprintf_error(buflen - len, ret))
+--- a/src/ap/ieee802_1x.c
++++ b/src/ap/ieee802_1x.c
+@@ -2834,6 +2834,7 @@ static const char * bool_txt(bool val)
+ 	return val ? "TRUE" : "FALSE";
+ }
+ 
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 
+ int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen)
+ {
+@@ -3020,6 +3021,7 @@ int ieee802_1x_get_mib_sta(struct hostap
+ 	return len;
+ }
+ 
++#endif
+ 
+ #ifdef CONFIG_HS20
+ static void ieee802_1x_wnm_notif_send(void *eloop_ctx, void *timeout_ctx)
+--- a/src/ap/wpa_auth.c
++++ b/src/ap/wpa_auth.c
+@@ -5328,6 +5328,7 @@ static const char * wpa_bool_txt(int val
+ 	return val ? "TRUE" : "FALSE";
+ }
+ 
++#ifdef CONFIG_CTRL_IFACE_MIB
+ 
+ #define RSN_SUITE "%02x-%02x-%02x-%d"
+ #define RSN_SUITE_ARG(s) \
+@@ -5480,7 +5481,7 @@ int wpa_get_mib_sta(struct wpa_state_mac
+ 
+ 	return len;
+ }
+-
++#endif
+ 
+ void wpa_auth_countermeasures_start(struct wpa_authenticator *wpa_auth)
+ {
+--- a/src/rsn_supp/wpa.c
++++ b/src/rsn_supp/wpa.c
+@@ -3834,6 +3834,8 @@ static u32 wpa_key_mgmt_suite(struct wpa
+ }
+ 
+ 
++#ifdef CONFIG_CTRL_IFACE_MIB
++
+ #define RSN_SUITE "%02x-%02x-%02x-%d"
+ #define RSN_SUITE_ARG(s) \
+ ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff
+@@ -3915,6 +3917,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch
+ 
+ 	return (int) len;
+ }
++#endif
+ #endif /* CONFIG_CTRL_IFACE */
+ 
+ 
+--- a/wpa_supplicant/ap.c
++++ b/wpa_supplicant/ap.c
+@@ -1499,7 +1499,7 @@ int wpas_ap_wps_nfc_report_handover(stru
+ #endif /* CONFIG_WPS */
+ 
+ 
+-#ifdef CONFIG_CTRL_IFACE
++#if defined(CONFIG_CTRL_IFACE) && defined(CONFIG_CTRL_IFACE_MIB)
+ 
+ int ap_ctrl_iface_sta_first(struct wpa_supplicant *wpa_s,
+ 			    char *buf, size_t buflen)

feeds/hostapd/hostapd/patches/460-wpa_supplicant-add-new-config-params-to-be-used-with.patch

@@ -0,0 +1,189 @@
+From 4bb69d15477e0f2b00e166845341dc933de47c58 Mon Sep 17 00:00:00 2001
+From: Antonio Quartulli <ordex@autistici.org>
+Date: Sun, 3 Jun 2012 18:22:56 +0200
+Subject: [PATCHv2 601/602] wpa_supplicant: add new config params to be used
+ with the ibss join command
+
+Signed-hostap: Antonio Quartulli <ordex@autistici.org>
+---
+ src/drivers/driver.h            |    6 +++
+ wpa_supplicant/config.c         |   96 +++++++++++++++++++++++++++++++++++++++
+ wpa_supplicant/config_ssid.h    |    6 +++
+ wpa_supplicant/wpa_supplicant.c |   23 +++++++---
+ 4 files changed, 124 insertions(+), 7 deletions(-)
+
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -19,6 +19,7 @@
+ 
+ #define WPA_SUPPLICANT_DRIVER_VERSION 4
+ 
++#include "ap/sta_info.h"
+ #include "common/defs.h"
+ #include "common/ieee802_11_defs.h"
+ #include "common/wpa_common.h"
+@@ -953,6 +954,9 @@ struct wpa_driver_associate_params {
+ 	 * responsible for selecting with which BSS to associate. */
+ 	const u8 *bssid;
+ 
++	unsigned char rates[WLAN_SUPP_RATES_MAX];
++	int mcast_rate;
++
+ 	/**
+ 	 * bssid_hint - BSSID of a proposed AP
+ 	 *
+--- a/wpa_supplicant/config.c
++++ b/wpa_supplicant/config.c
+@@ -18,6 +18,7 @@
+ #include "eap_peer/eap.h"
+ #include "p2p/p2p.h"
+ #include "fst/fst.h"
++#include "ap/sta_info.h"
+ #include "config.h"
+ 
+ 
+@@ -2389,6 +2390,97 @@ static char * wpa_config_write_mac_value
+ #endif /* NO_CONFIG_WRITE */
+ 
+ 
++static int wpa_config_parse_mcast_rate(const struct parse_data *data,
++				       struct wpa_ssid *ssid, int line,
++				       const char *value)
++{
++	ssid->mcast_rate = (int)(strtod(value, NULL) * 10);
++
++	return 0;
++}
++
++#ifndef NO_CONFIG_WRITE
++static char * wpa_config_write_mcast_rate(const struct parse_data *data,
++					  struct wpa_ssid *ssid)
++{
++	char *value;
++	int res;
++
++	if (!ssid->mcast_rate == 0)
++		return NULL;
++
++	value = os_malloc(6); /* longest: 300.0 */
++	if (value == NULL)
++		return NULL;
++	res = os_snprintf(value, 5, "%.1f", (double)ssid->mcast_rate / 10);
++	if (res < 0) {
++		os_free(value);
++		return NULL;
++	}
++	return value;
++}
++#endif /* NO_CONFIG_WRITE */
++
++static int wpa_config_parse_rates(const struct parse_data *data,
++				  struct wpa_ssid *ssid, int line,
++				  const char *value)
++{
++	int i;
++	char *pos, *r, *sptr, *end;
++	double rate;
++
++	pos = (char *)value;
++	r = strtok_r(pos, ",", &sptr);
++	i = 0;
++	while (pos && i < WLAN_SUPP_RATES_MAX) {
++		rate = 0.0;
++		if (r)
++			rate = strtod(r, &end);
++		ssid->rates[i] = rate * 2;
++		if (*end != '\0' || rate * 2 != ssid->rates[i])
++			return 1;
++
++		i++;
++		r = strtok_r(NULL, ",", &sptr);
++	}
++
++	return 0;
++}
++
++#ifndef NO_CONFIG_WRITE
++static char * wpa_config_write_rates(const struct parse_data *data,
++				     struct wpa_ssid *ssid)
++{
++	char *value, *pos;
++	int res, i;
++
++	if (ssid->rates[0] <= 0)
++		return NULL;
++
++	value = os_malloc(6 * WLAN_SUPP_RATES_MAX + 1);
++	if (value == NULL)
++		return NULL;
++	pos = value;
++	for (i = 0; i < WLAN_SUPP_RATES_MAX - 1; i++) {
++		res = os_snprintf(pos, 6, "%.1f,", (double)ssid->rates[i] / 2);
++		if (res < 0) {
++			os_free(value);
++			return NULL;
++		}
++		pos += res;
++	}
++	res = os_snprintf(pos, 6, "%.1f",
++			  (double)ssid->rates[WLAN_SUPP_RATES_MAX - 1] / 2);
++	if (res < 0) {
++		os_free(value);
++		return NULL;
++	}
++
++	value[6 * WLAN_SUPP_RATES_MAX] = '\0';
++	return value;
++}
++#endif /* NO_CONFIG_WRITE */
++
+ /* Helper macros for network block parser */
+ 
+ #ifdef OFFSET
+@@ -2674,6 +2766,8 @@ static const struct parse_data ssid_fiel
+ 	{ INT(ap_max_inactivity) },
+ 	{ INT(dtim_period) },
+ 	{ INT(beacon_int) },
++	{ FUNC(rates) },
++	{ FUNC(mcast_rate) },
+ #ifdef CONFIG_MACSEC
+ 	{ INT_RANGE(macsec_policy, 0, 1) },
+ 	{ INT_RANGE(macsec_integ_only, 0, 1) },
+--- a/wpa_supplicant/config_ssid.h
++++ b/wpa_supplicant/config_ssid.h
+@@ -10,8 +10,10 @@
+ #define CONFIG_SSID_H
+ 
+ #include "common/defs.h"
++#include "ap/sta_info.h"
+ #include "utils/list.h"
+ #include "eap_peer/eap_config.h"
++#include "drivers/nl80211_copy.h"
+ 
+ 
+ #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
+@@ -879,6 +881,9 @@ struct wpa_ssid {
+ 	 */
+ 	void *parent_cred;
+ 
++	unsigned char rates[WLAN_SUPP_RATES_MAX];
++	double mcast_rate;
++
+ #ifdef CONFIG_MACSEC
+ 	/**
+ 	 * macsec_policy - Determines the policy for MACsec secure session
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -4175,6 +4175,12 @@ static void wpas_start_assoc_cb(struct w
+ 			params.beacon_int = ssid->beacon_int;
+ 		else
+ 			params.beacon_int = wpa_s->conf->beacon_int;
++		int i = 0;
++		while (i < WLAN_SUPP_RATES_MAX) {
++			params.rates[i] = ssid->rates[i];
++			i++;
++		}
++		params.mcast_rate = ssid->mcast_rate;
+ 	}
+ 
+ 	if (bss && ssid->enable_edmg)

feeds/hostapd/hostapd/patches/463-add-mcast_rate-to-11s.patch

@@ -0,0 +1,68 @@
+From: Sven Eckelmann <sven.eckelmann@openmesh.com>
+Date: Thu, 11 May 2017 08:21:45 +0200
+Subject: [PATCH] set mcast_rate in mesh mode
+
+The wpa_supplicant code for IBSS allows to set the mcast rate. It is
+recommended to increase this value from 1 or 6 Mbit/s to something higher
+when using a mesh protocol on top which uses the multicast packet loss as
+indicator for the link quality.
+
+This setting was unfortunately not applied for mesh mode. But it would be
+beneficial when wpa_supplicant would behave similar to IBSS mode and set
+this argument during mesh join like authsae already does. At least it is
+helpful for companies/projects which are currently switching to 802.11s
+(without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS
+because newer drivers seem to support 802.11s but not IBSS anymore.
+
+Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
+Tested-by: Simon Wunderlich <simon.wunderlich@openmesh.com>
+
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -1827,6 +1827,7 @@ struct wpa_driver_mesh_join_params {
+ #define WPA_DRIVER_MESH_FLAG_AMPE	0x00000008
+ 	unsigned int flags;
+ 	bool handle_dfs;
++	int mcast_rate;
+ };
+ 
+ struct wpa_driver_set_key_params {
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -11667,6 +11667,18 @@ static int nl80211_put_mesh_id(struct nl
+ }
+ 
+ 
++static int nl80211_put_mcast_rate(struct nl_msg *msg, int mcast_rate)
++{
++	if (mcast_rate > 0) {
++		wpa_printf(MSG_DEBUG, "  * mcast_rate=%.1f",
++			   (double)mcast_rate / 10);
++		return nla_put_u32(msg, NL80211_ATTR_MCAST_RATE, mcast_rate);
++	}
++
++	return 0;
++}
++
++
+ static int nl80211_put_mesh_config(struct nl_msg *msg,
+ 				   struct wpa_driver_mesh_bss_params *params)
+ {
+@@ -11728,6 +11740,7 @@ static int nl80211_join_mesh(struct i802
+ 	    nl80211_put_basic_rates(msg, params->basic_rates) ||
+ 	    nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
+ 	    nl80211_put_beacon_int(msg, params->beacon_int) ||
++	    nl80211_put_mcast_rate(msg, params->mcast_rate) ||
+ 	    nl80211_put_dtim_period(msg, params->dtim_period))
+ 		goto fail;
+ 
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -632,6 +632,7 @@ int wpa_supplicant_join_mesh(struct wpa_
+ 
+ 	params->meshid = ssid->ssid;
+ 	params->meshid_len = ssid->ssid_len;
++	params->mcast_rate = ssid->mcast_rate;
+ 	ibss_mesh_setup_freq(wpa_s, ssid, &params->freq);
+ 	wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
+ 	wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;

feeds/hostapd/hostapd/patches/464-fix-mesh-obss-check.patch

@@ -0,0 +1,13 @@
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -3040,6 +3040,10 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ 
+ 	freq->freq = ssid->frequency;
+ 
++	if (ssid->fixed_freq) {
++		obss_scan = 0;
++	}
++
+ 	if (ssid->mode == WPAS_MODE_IBSS && !ssid->fixed_freq) {
+ 		struct wpa_bss *bss = ibss_find_existing_bss(wpa_s, ssid);
+ 

feeds/hostapd/hostapd/patches/465-hostapd-config-support-random-BSS-color.patch

@@ -0,0 +1,24 @@
+From c9304d3303d563ad6d2619f4e07864ed12f96889 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sat, 14 May 2022 21:41:03 +0200
+Subject: [PATCH] hostapd: config: support random BSS color
+
+Configure the HE BSS color to a random value in case the config defines
+a BSS color which exceeds the max BSS color (63).
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ hostapd/config_file.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/hostapd/config_file.c
++++ b/hostapd/config_file.c
+@@ -3500,6 +3500,8 @@ static int hostapd_config_fill(struct ho
+ 	} else if (os_strcmp(buf, "he_bss_color") == 0) {
+ 		conf->he_op.he_bss_color = atoi(pos) & 0x3f;
+ 		conf->he_op.he_bss_color_disabled = 0;
++		if (atoi(pos) > 63)
++			conf->he_op.he_bss_color = os_random() % 63 + 1;
+ 	} else if (os_strcmp(buf, "he_bss_color_partial") == 0) {
+ 		conf->he_op.he_bss_color_partial = atoi(pos);
+ 	} else if (os_strcmp(buf, "he_default_pe_duration") == 0) {

feeds/hostapd/hostapd/patches/600-ubus_support.patch

@@ -0,0 +1,738 @@
+--- a/hostapd/Makefile
++++ b/hostapd/Makefile
+@@ -166,6 +166,12 @@ OBJS += ../src/common/hw_features_common
+ 
+ OBJS += ../src/eapol_auth/eapol_auth_sm.o
+ 
++ifdef CONFIG_UBUS
++CFLAGS += -DUBUS_SUPPORT
++OBJS += ../src/utils/uloop.o
++OBJS += ../src/ap/ubus.o
++LIBS += -lubox -lubus
++endif
+ 
+ ifdef CONFIG_CODE_COVERAGE
+ CFLAGS += -O0 -fprofile-arcs -ftest-coverage
+--- a/src/ap/hostapd.h
++++ b/src/ap/hostapd.h
+@@ -18,6 +18,7 @@
+ #include "utils/list.h"
+ #include "ap_config.h"
+ #include "drivers/driver.h"
++#include "ubus.h"
+ 
+ #define OCE_STA_CFON_ENABLED(hapd) \
+ 	((hapd->conf->oce & OCE_STA_CFON) && \
+@@ -184,6 +185,7 @@ struct hostapd_data {
+ 	struct hostapd_iface *iface;
+ 	struct hostapd_config *iconf;
+ 	struct hostapd_bss_config *conf;
++	struct hostapd_ubus_bss ubus;
+ 	int interface_added; /* virtual interface added for this BSS */
+ 	unsigned int started:1;
+ 	unsigned int disabled:1;
+@@ -695,6 +697,7 @@ hostapd_alloc_bss_data(struct hostapd_if
+ 		       struct hostapd_bss_config *bss);
+ int hostapd_setup_interface(struct hostapd_iface *iface);
+ int hostapd_setup_interface_complete(struct hostapd_iface *iface, int err);
++void hostapd_set_own_neighbor_report(struct hostapd_data *hapd);
+ void hostapd_interface_deinit(struct hostapd_iface *iface);
+ void hostapd_interface_free(struct hostapd_iface *iface);
+ struct hostapd_iface * hostapd_alloc_iface(void);
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -435,6 +435,7 @@ void hostapd_free_hapd_data(struct hosta
+ 	hapd->beacon_set_done = 0;
+ 
+ 	wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface);
++	hostapd_ubus_free_bss(hapd);
+ 	accounting_deinit(hapd);
+ 	hostapd_deinit_wpa(hapd);
+ 	vlan_deinit(hapd);
+@@ -1187,6 +1188,8 @@ static int hostapd_start_beacon(struct h
+ 	if (hapd->driver && hapd->driver->set_operstate)
+ 		hapd->driver->set_operstate(hapd->drv_priv, 1);
+ 
++	hostapd_ubus_add_bss(hapd);
++
+ 	return 0;
+ }
+ 
+@@ -2275,6 +2278,7 @@ static int hostapd_setup_interface_compl
+ 	if (err)
+ 		goto fail;
+ 
++	hostapd_ubus_add_iface(iface);
+ 	wpa_printf(MSG_DEBUG, "Completing interface initialization");
+ 	if (iface->freq) {
+ #ifdef NEED_AP_MLME
+@@ -2494,6 +2498,7 @@ dfs_offload:
+ 
+ fail:
+ 	wpa_printf(MSG_ERROR, "Interface initialization failed");
++	hostapd_ubus_free_iface(iface);
+ 
+ 	if (iface->is_no_ir) {
+ 		hostapd_set_state(iface, HAPD_IFACE_NO_IR);
+@@ -2984,6 +2989,7 @@ void hostapd_interface_deinit_free(struc
+ 		   (unsigned int) iface->conf->num_bss);
+ 	driver = iface->bss[0]->driver;
+ 	drv_priv = iface->bss[0]->drv_priv;
++	hostapd_ubus_free_iface(iface);
+ 	hostapd_interface_deinit(iface);
+ 	wpa_printf(MSG_DEBUG, "%s: driver=%p drv_priv=%p -> hapd_deinit",
+ 		   __func__, driver, drv_priv);
+--- a/src/ap/ieee802_11.c
++++ b/src/ap/ieee802_11.c
+@@ -2786,7 +2786,7 @@ static void handle_auth(struct hostapd_d
+ 	u16 auth_alg, auth_transaction, status_code;
+ 	u16 resp = WLAN_STATUS_SUCCESS;
+ 	struct sta_info *sta = NULL;
+-	int res, reply_res;
++	int res, reply_res, ubus_resp;
+ 	u16 fc;
+ 	const u8 *challenge = NULL;
+ 	u8 resp_ies[2 + WLAN_AUTH_CHALLENGE_LEN];
+@@ -2795,6 +2795,11 @@ static void handle_auth(struct hostapd_d
+ 	struct radius_sta rad_info;
+ 	const u8 *dst, *sa, *bssid;
+ 	bool mld_sta = false;
++	struct hostapd_ubus_request req = {
++		.type = HOSTAPD_UBUS_AUTH_REQ,
++		.mgmt_frame = mgmt,
++		.ssi_signal = rssi,
++	};
+ 
+ 	if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.auth)) {
+ 		wpa_printf(MSG_INFO, "handle_auth - too short payload (len=%lu)",
+@@ -2986,6 +2991,13 @@ static void handle_auth(struct hostapd_d
+ 		resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
+ 		goto fail;
+ 	}
++	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
++	if (0 && ubus_resp) {
++		wpa_printf(MSG_DEBUG, "Station " MACSTR " rejected by ubus handler.\n",
++			MAC2STR(mgmt->sa));
++		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
++		goto fail;
++	}
+ 	if (res == HOSTAPD_ACL_PENDING)
+ 		return;
+ 
+@@ -5161,7 +5173,7 @@ static void handle_assoc(struct hostapd_
+ 	int resp = WLAN_STATUS_SUCCESS;
+ 	u16 reply_res = WLAN_STATUS_UNSPECIFIED_FAILURE;
+ 	const u8 *pos;
+-	int left, i;
++	int left, i, ubus_resp;
+ 	struct sta_info *sta;
+ 	u8 *tmp = NULL;
+ #ifdef CONFIG_FILS
+@@ -5374,6 +5386,11 @@ static void handle_assoc(struct hostapd_
+ 		left = res;
+ 	}
+ #endif /* CONFIG_FILS */
++	struct hostapd_ubus_request req = {
++		.type = HOSTAPD_UBUS_ASSOC_REQ,
++		.mgmt_frame = mgmt,
++		.ssi_signal = rssi,
++	};
+ 
+ 	/* followed by SSID and Supported rates; and HT capabilities if 802.11n
+ 	 * is used */
+@@ -5472,6 +5489,13 @@ static void handle_assoc(struct hostapd_
+ 	}
+ #endif /* CONFIG_FILS */
+ 
++	ubus_resp = hostapd_ubus_handle_event(hapd, &req);
++	if (0 && ubus_resp) {
++		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
++		       MAC2STR(mgmt->sa));
++		resp = ubus_resp > 0 ? (u16) ubus_resp : WLAN_STATUS_UNSPECIFIED_FAILURE;
++		goto fail;
++	}
+  fail:
+ 
+ 	/*
+@@ -5753,6 +5777,7 @@ static void handle_disassoc(struct hosta
+ 			   (unsigned long) len);
+ 		return;
+ 	}
++	hostapd_ubus_notify(hapd, "disassoc", mgmt->sa);
+ 
+ 	sta = ap_get_sta(hapd, mgmt->sa);
+ 	if (!sta) {
+@@ -5784,6 +5809,8 @@ static void handle_deauth(struct hostapd
+ 	/* Clear the PTKSA cache entries for PASN */
+ 	ptksa_cache_flush(hapd->ptksa, mgmt->sa, WPA_CIPHER_NONE);
+ 
++	hostapd_ubus_notify(hapd, "deauth", mgmt->sa);
++
+ 	sta = ap_get_sta(hapd, mgmt->sa);
+ 	if (!sta) {
+ 		wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -1036,6 +1036,12 @@ void handle_probe_req(struct hostapd_dat
+ 	u16 csa_offs[2];
+ 	size_t csa_offs_len;
+ 	struct radius_sta rad_info;
++	struct hostapd_ubus_request req = {
++		.type = HOSTAPD_UBUS_PROBE_REQ,
++		.mgmt_frame = mgmt,
++		.ssi_signal = ssi_signal,
++		.elems = &elems,
++	};
+ 
+ 	if (hapd->iconf->rssi_ignore_probe_request && ssi_signal &&
+ 	    ssi_signal < hapd->iconf->rssi_ignore_probe_request)
+@@ -1222,6 +1228,12 @@ void handle_probe_req(struct hostapd_dat
+ 	}
+ #endif /* CONFIG_P2P */
+ 
++	if (hostapd_ubus_handle_event(hapd, &req)) {
++		wpa_printf(MSG_DEBUG, "Probe request for " MACSTR " rejected by ubus handler.\n",
++		       MAC2STR(mgmt->sa));
++		return;
++	}
++
+ 	/* TODO: verify that supp_rates contains at least one matching rate
+ 	 * with AP configuration */
+ 
+--- a/src/ap/drv_callbacks.c
++++ b/src/ap/drv_callbacks.c
+@@ -260,6 +260,10 @@ int hostapd_notif_assoc(struct hostapd_d
+ 	u16 reason = WLAN_REASON_UNSPECIFIED;
+ 	int status = WLAN_STATUS_SUCCESS;
+ 	const u8 *p2p_dev_addr = NULL;
++	struct hostapd_ubus_request req = {
++		.type = HOSTAPD_UBUS_ASSOC_REQ,
++		.addr = addr,
++	};
+ 
+ 	if (addr == NULL) {
+ 		/*
+@@ -396,6 +400,12 @@ int hostapd_notif_assoc(struct hostapd_d
+ 		goto fail;
+ 	}
+ 
++	if (hostapd_ubus_handle_event(hapd, &req)) {
++		wpa_printf(MSG_DEBUG, "Station " MACSTR " assoc rejected by ubus handler.\n",
++			   MAC2STR(req.addr));
++		goto fail;
++	}
++
+ #ifdef CONFIG_P2P
+ 	if (elems.p2p) {
+ 		wpabuf_free(sta->p2p_ie);
+--- a/src/ap/sta_info.c
++++ b/src/ap/sta_info.c
+@@ -471,6 +471,7 @@ void ap_handle_timer(void *eloop_ctx, vo
+ 		hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
+ 			       HOSTAPD_LEVEL_INFO, "deauthenticated due to "
+ 			       "local deauth request");
++		hostapd_ubus_notify(hapd, "local-deauth", sta->addr);
+ 		ap_free_sta(hapd, sta);
+ 		return;
+ 	}
+@@ -626,6 +627,7 @@ skip_poll:
+ 		mlme_deauthenticate_indication(
+ 			hapd, sta,
+ 			WLAN_REASON_PREV_AUTH_NOT_VALID);
++		hostapd_ubus_notify(hapd, "inactive-deauth", sta->addr);
+ 		ap_free_sta(hapd, sta);
+ 		break;
+ 	}
+@@ -1344,15 +1346,28 @@ void ap_sta_set_authorized(struct hostap
+ 					sta->addr, authorized, dev_addr);
+ 
+ 	if (authorized) {
++		static const char * const auth_algs[] = {
++			[WLAN_AUTH_OPEN] = "open",
++			[WLAN_AUTH_SHARED_KEY] = "shared",
++			[WLAN_AUTH_FT] = "ft",
++			[WLAN_AUTH_SAE] = "sae",
++			[WLAN_AUTH_FILS_SK] = "fils-sk",
++			[WLAN_AUTH_FILS_SK_PFS] = "fils-sk-pfs",
++			[WLAN_AUTH_FILS_PK] = "fils-pk",
++			[WLAN_AUTH_PASN] = "pasn",
++		};
++		const char *auth_alg = NULL;
+ 		const u8 *dpp_pkhash;
+ 		const char *keyid;
+ 		char dpp_pkhash_buf[100];
+ 		char keyid_buf[100];
+ 		char ip_addr[100];
++		char alg_buf[100];
+ 
+ 		dpp_pkhash_buf[0] = '\0';
+ 		keyid_buf[0] = '\0';
+ 		ip_addr[0] = '\0';
++		alg_buf[0] = '\0';
+ #ifdef CONFIG_P2P
+ 		if (wpa_auth_get_ip_addr(sta->wpa_sm, ip_addr_buf) == 0) {
+ 			os_snprintf(ip_addr, sizeof(ip_addr),
+@@ -1362,6 +1377,13 @@ void ap_sta_set_authorized(struct hostap
+ 		}
+ #endif /* CONFIG_P2P */
+ 
++		if (sta->auth_alg < ARRAY_SIZE(auth_algs))
++			auth_alg = auth_algs[sta->auth_alg];
++
++		if (auth_alg)
++			os_snprintf(alg_buf, sizeof(alg_buf),
++				" auth_alg=%s", auth_alg);
++
+ 		keyid = ap_sta_wpa_get_keyid(hapd, sta);
+ 		if (keyid) {
+ 			os_snprintf(keyid_buf, sizeof(keyid_buf),
+@@ -1380,17 +1402,19 @@ void ap_sta_set_authorized(struct hostap
+ 					 dpp_pkhash, SHA256_MAC_LEN);
+ 		}
+ 
+-		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s",
+-			buf, ip_addr, keyid_buf, dpp_pkhash_buf);
++		hostapd_ubus_notify_authorized(hapd, sta);
++		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_CONNECTED "%s%s%s%s%s",
++			buf, ip_addr, keyid_buf, dpp_pkhash_buf, alg_buf);
+ 
+ 		if (hapd->msg_ctx_parent &&
+ 		    hapd->msg_ctx_parent != hapd->msg_ctx)
+ 			wpa_msg_no_global(hapd->msg_ctx_parent, MSG_INFO,
+-					  AP_STA_CONNECTED "%s%s%s%s",
++					  AP_STA_CONNECTED "%s%s%s%s%s",
+ 					  buf, ip_addr, keyid_buf,
+-					  dpp_pkhash_buf);
++					  dpp_pkhash_buf, alg_buf);
+ 	} else {
+ 		wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_DISCONNECTED "%s", buf);
++		hostapd_ubus_notify(hapd, "disassoc", sta->addr);
+ 
+ 		if (hapd->msg_ctx_parent &&
+ 		    hapd->msg_ctx_parent != hapd->msg_ctx)
+--- a/src/ap/wpa_auth_glue.c
++++ b/src/ap/wpa_auth_glue.c
+@@ -269,6 +269,7 @@ static void hostapd_wpa_auth_psk_failure
+ 	struct hostapd_data *hapd = ctx;
+ 	wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_POSSIBLE_PSK_MISMATCH MACSTR,
+ 		MAC2STR(addr));
++	hostapd_ubus_notify(hapd, "key-mismatch", addr);
+ }
+ 
+ 
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -192,6 +192,13 @@ ifdef CONFIG_EAPOL_TEST
+ CFLAGS += -Werror -DEAPOL_TEST
+ endif
+ 
++ifdef CONFIG_UBUS
++CFLAGS += -DUBUS_SUPPORT
++OBJS += ubus.o
++OBJS += ../src/utils/uloop.o
++LIBS += -lubox -lubus
++endif
++
+ ifdef CONFIG_CODE_COVERAGE
+ CFLAGS += -O0 -fprofile-arcs -ftest-coverage
+ LIBS += -lgcov
+@@ -987,6 +994,9 @@ ifdef CONFIG_CTRL_IFACE_MIB
+ CFLAGS += -DCONFIG_CTRL_IFACE_MIB
+ endif
+ OBJS += ../src/ap/ctrl_iface_ap.o
++ifdef CONFIG_UBUS
++OBJS += ../src/ap/ubus.o
++endif
+ endif
+ 
+ CFLAGS += -DEAP_SERVER -DEAP_SERVER_IDENTITY
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -7593,6 +7593,8 @@ struct wpa_supplicant * wpa_supplicant_a
+ 	}
+ #endif /* CONFIG_P2P */
+ 
++	wpas_ubus_add_bss(wpa_s);
++
+ 	return wpa_s;
+ }
+ 
+@@ -7619,6 +7621,8 @@ int wpa_supplicant_remove_iface(struct w
+ 	struct wpa_supplicant *parent = wpa_s->parent;
+ #endif /* CONFIG_MESH */
+ 
++	wpas_ubus_free_bss(wpa_s);
++
+ 	/* Remove interface from the global list of interfaces */
+ 	prev = global->ifaces;
+ 	if (prev == wpa_s) {
+@@ -7965,8 +7969,12 @@ int wpa_supplicant_run(struct wpa_global
+ 	eloop_register_signal_terminate(wpa_supplicant_terminate, global);
+ 	eloop_register_signal_reconfig(wpa_supplicant_reconfig, global);
+ 
++	wpas_ubus_add(global);
++
+ 	eloop_run();
+ 
++	wpas_ubus_free(global);
++
+ 	return 0;
+ }
+ 
+--- a/wpa_supplicant/wpa_supplicant_i.h
++++ b/wpa_supplicant/wpa_supplicant_i.h
+@@ -21,6 +21,7 @@
+ #include "config_ssid.h"
+ #include "wmm_ac.h"
+ #include "pasn/pasn_common.h"
++#include "ubus.h"
+ 
+ extern const char *const wpa_supplicant_version;
+ extern const char *const wpa_supplicant_license;
+@@ -319,6 +320,8 @@ struct wpa_global {
+ #endif /* CONFIG_WIFI_DISPLAY */
+ 
+ 	struct psk_list_entry *add_psk; /* From group formation */
++
++	struct ubus_object ubus_global;
+ };
+ 
+ 
+@@ -685,6 +688,7 @@ struct wpa_supplicant {
+ 	unsigned char own_addr[ETH_ALEN];
+ 	unsigned char perm_addr[ETH_ALEN];
+ 	char ifname[100];
++	struct wpas_ubus_bss ubus;
+ #ifdef CONFIG_MATCH_IFACE
+ 	int matched;
+ #endif /* CONFIG_MATCH_IFACE */
+--- a/wpa_supplicant/wps_supplicant.c
++++ b/wpa_supplicant/wps_supplicant.c
+@@ -33,6 +33,7 @@
+ #include "p2p/p2p.h"
+ #include "p2p_supplicant.h"
+ #include "wps_supplicant.h"
++#include "ubus.h"
+ 
+ 
+ #ifndef WPS_PIN_SCAN_IGNORE_SEL_REG
+@@ -402,6 +403,8 @@ static int wpa_supplicant_wps_cred(void
+ 	wpa_hexdump_key(MSG_DEBUG, "WPS: Received Credential attribute",
+ 			cred->cred_attr, cred->cred_attr_len);
+ 
++	wpas_ubus_notify(wpa_s, cred);
++
+ 	if (wpa_s->conf->wps_cred_processing == 1)
+ 		return 0;
+ 
+--- a/wpa_supplicant/main.c
++++ b/wpa_supplicant/main.c
+@@ -203,7 +203,7 @@ int main(int argc, char *argv[])
+ 
+ 	for (;;) {
+ 		c = getopt(argc, argv,
+-			   "b:Bc:C:D:de:f:g:G:hi:I:KLMm:No:O:p:P:qsTtuv::W");
++			   "b:Bc:C:D:de:f:g:G:hi:I:KLMm:nNo:O:p:P:qsTtuv::W");
+ 		if (c < 0)
+ 			break;
+ 		switch (c) {
+@@ -268,6 +268,9 @@ int main(int argc, char *argv[])
+ 			params.conf_p2p_dev = optarg;
+ 			break;
+ #endif /* CONFIG_P2P */
++		case 'n':
++			iface_count = 0;
++			break;
+ 		case 'o':
+ 			params.override_driver = optarg;
+ 			break;
+--- a/src/ap/rrm.c
++++ b/src/ap/rrm.c
+@@ -89,6 +89,9 @@ static void hostapd_handle_beacon_report
+ 		return;
+ 	wpa_msg(hapd->msg_ctx, MSG_INFO, BEACON_RESP_RX MACSTR " %u %02x %s",
+ 		MAC2STR(addr), token, rep_mode, report);
++	if (len < sizeof(struct rrm_measurement_beacon_report))
++		return;
++	hostapd_ubus_notify_beacon_report(hapd, addr, token, rep_mode, (struct rrm_measurement_beacon_report*) pos, len);
+ }
+ 
+ 
+--- a/src/ap/vlan_init.c
++++ b/src/ap/vlan_init.c
+@@ -22,6 +22,7 @@
+ static int vlan_if_add(struct hostapd_data *hapd, struct hostapd_vlan *vlan,
+ 		       int existsok)
+ {
++	bool vlan_exists = iface_exists(vlan->ifname);
+ 	int ret;
+ #ifdef CONFIG_WEP
+ 	int i;
+@@ -36,7 +37,7 @@ static int vlan_if_add(struct hostapd_da
+ 	}
+ #endif /* CONFIG_WEP */
+ 
+-	if (!iface_exists(vlan->ifname))
++	if (!vlan_exists)
+ 		ret = hostapd_vlan_if_add(hapd, vlan->ifname);
+ 	else if (!existsok)
+ 		return -1;
+@@ -51,6 +52,9 @@ static int vlan_if_add(struct hostapd_da
+ 	if (hapd->wpa_auth)
+ 		ret = wpa_auth_ensure_group(hapd->wpa_auth, vlan->vlan_id);
+ 
++	if (!ret && !vlan_exists)
++		hostapd_ubus_add_vlan(hapd, vlan);
++
+ 	if (ret == 0)
+ 		return ret;
+ 
+@@ -77,6 +81,8 @@ int vlan_if_remove(struct hostapd_data *
+ 			   "WPA deinitialization for VLAN %d failed (%d)",
+ 			   vlan->vlan_id, ret);
+ 
++	hostapd_ubus_remove_vlan(hapd, vlan);
++
+ 	return hostapd_vlan_if_remove(hapd, vlan->ifname);
+ }
+ 
+--- a/src/ap/dfs.c
++++ b/src/ap/dfs.c
+@@ -1216,6 +1216,8 @@ int hostapd_dfs_pre_cac_expired(struct h
+ 		"freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
+ 		freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
+ 
++	hostapd_ubus_notify_radar_detected(iface, freq, chan_width, cf1, cf2);
++
+ 	/* Proceed only if DFS is not offloaded to the driver */
+ 	if (iface->drv_flags & WPA_DRIVER_FLAGS_DFS_OFFLOAD)
+ 		return 0;
+--- a/src/ap/airtime_policy.c
++++ b/src/ap/airtime_policy.c
+@@ -112,8 +112,14 @@ static void set_sta_weights(struct hosta
+ {
+ 	struct sta_info *sta;
+ 
+-	for (sta = hapd->sta_list; sta; sta = sta->next)
+-		sta_set_airtime_weight(hapd, sta, weight);
++	for (sta = hapd->sta_list; sta; sta = sta->next) {
++		unsigned int sta_weight = weight;
++
++		if (sta->dyn_airtime_weight)
++			sta_weight = (weight * sta->dyn_airtime_weight) / 256;
++
++		sta_set_airtime_weight(hapd, sta, sta_weight);
++	}
+ }
+ 
+ 
+@@ -244,7 +250,10 @@ int airtime_policy_new_sta(struct hostap
+ 	unsigned int weight;
+ 
+ 	if (hapd->iconf->airtime_mode == AIRTIME_MODE_STATIC) {
+-		weight = get_weight_for_sta(hapd, sta->addr);
++		if (sta->dyn_airtime_weight)
++			weight = sta->dyn_airtime_weight;
++		else
++			weight = get_weight_for_sta(hapd, sta->addr);
+ 		if (weight)
+ 			return sta_set_airtime_weight(hapd, sta, weight);
+ 	}
+--- a/src/ap/sta_info.h
++++ b/src/ap/sta_info.h
+@@ -322,6 +322,7 @@ struct sta_info {
+ #endif /* CONFIG_TESTING_OPTIONS */
+ #ifdef CONFIG_AIRTIME_POLICY
+ 	unsigned int airtime_weight;
++	unsigned int dyn_airtime_weight;
+ 	struct os_reltime backlogged_until;
+ #endif /* CONFIG_AIRTIME_POLICY */
+ 
+--- a/src/ap/wnm_ap.c
++++ b/src/ap/wnm_ap.c
+@@ -455,7 +455,8 @@ static void ieee802_11_rx_bss_trans_mgmt
+ 		MAC2STR(addr), reason, hex ? " neighbor=" : "", hex);
+ 	os_free(hex);
+ 
+-	ieee802_11_send_bss_trans_mgmt_request(hapd, addr, dialog_token);
++	if (!hostapd_ubus_notify_bss_transition_query(hapd, addr, dialog_token, reason, pos, end - pos))
++		ieee802_11_send_bss_trans_mgmt_request(hapd, addr, dialog_token);
+ }
+ 
+ 
+@@ -477,7 +478,7 @@ static void ieee802_11_rx_bss_trans_mgmt
+ 					      size_t len)
+ {
+ 	u8 dialog_token, status_code, bss_termination_delay;
+-	const u8 *pos, *end;
++	const u8 *pos, *end, *target_bssid = NULL;
+ 	int enabled = hapd->conf->bss_transition;
+ 	struct sta_info *sta;
+ 
+@@ -524,6 +525,7 @@ static void ieee802_11_rx_bss_trans_mgmt
+ 			wpa_printf(MSG_DEBUG, "WNM: not enough room for Target BSSID field");
+ 			return;
+ 		}
++		target_bssid = pos;
+ 		sta->agreed_to_steer = 1;
+ 		eloop_cancel_timeout(ap_sta_reset_steer_flag_timer, hapd, sta);
+ 		eloop_register_timeout(2, 0, ap_sta_reset_steer_flag_timer,
+@@ -543,6 +545,10 @@ static void ieee802_11_rx_bss_trans_mgmt
+ 			MAC2STR(addr), status_code, bss_termination_delay);
+ 	}
+ 
++	hostapd_ubus_notify_bss_transition_response(hapd, sta->addr, dialog_token,
++						    status_code, bss_termination_delay,
++						    target_bssid, pos, end - pos);
++
+ 	wpa_hexdump(MSG_DEBUG, "WNM: BSS Transition Candidate List Entries",
+ 		    pos, end - pos);
+ }
+--- a/src/utils/eloop.c
++++ b/src/utils/eloop.c
+@@ -77,6 +77,9 @@ struct eloop_sock_table {
+ struct eloop_data {
+ 	int max_sock;
+ 
++	eloop_timeout_poll_handler timeout_poll_cb;
++	eloop_poll_handler poll_cb;
++
+ 	size_t count; /* sum of all table counts */
+ #ifdef CONFIG_ELOOP_POLL
+ 	size_t max_pollfd_map; /* number of pollfds_map currently allocated */
+@@ -1121,6 +1124,12 @@ void eloop_run(void)
+ 				os_reltime_sub(&timeout->time, &now, &tv);
+ 			else
+ 				tv.sec = tv.usec = 0;
++		}
++
++		if (eloop.timeout_poll_cb && eloop.timeout_poll_cb(&tv, !!timeout))
++			timeout = (void *)1;
++
++		if (timeout) {
+ #if defined(CONFIG_ELOOP_POLL) || defined(CONFIG_ELOOP_EPOLL)
+ 			timeout_ms = tv.sec * 1000 + tv.usec / 1000;
+ #endif /* defined(CONFIG_ELOOP_POLL) || defined(CONFIG_ELOOP_EPOLL) */
+@@ -1190,7 +1199,8 @@ void eloop_run(void)
+ 		eloop.exceptions.changed = 0;
+ 
+ 		eloop_process_pending_signals();
+-
++		if (eloop.poll_cb)
++			eloop.poll_cb();
+ 
+ 		/* check if some registered timeouts have occurred */
+ 		timeout = dl_list_first(&eloop.timeout, struct eloop_timeout,
+@@ -1252,6 +1262,14 @@ out:
+ 	return;
+ }
+ 
++int eloop_register_cb(eloop_poll_handler poll_cb,
++		      eloop_timeout_poll_handler timeout_cb)
++{
++	eloop.poll_cb = poll_cb;
++	eloop.timeout_poll_cb = timeout_cb;
++
++	return 0;
++}
+ 
+ void eloop_terminate(void)
+ {
+--- a/src/utils/eloop.h
++++ b/src/utils/eloop.h
+@@ -65,6 +65,9 @@ typedef void (*eloop_timeout_handler)(vo
+  */
+ typedef void (*eloop_signal_handler)(int sig, void *signal_ctx);
+ 
++typedef bool (*eloop_timeout_poll_handler)(struct os_reltime *tv, bool tv_set);
++typedef void (*eloop_poll_handler)(void);
++
+ /**
+  * eloop_init() - Initialize global event loop data
+  * Returns: 0 on success, -1 on failure
+@@ -73,6 +76,9 @@ typedef void (*eloop_signal_handler)(int
+  */
+ int eloop_init(void);
+ 
++int eloop_register_cb(eloop_poll_handler poll_cb,
++		      eloop_timeout_poll_handler timeout_cb);
++
+ /**
+  * eloop_register_read_sock - Register handler for read events
+  * @sock: File descriptor number for the socket
+@@ -320,6 +326,8 @@ int eloop_register_signal_reconfig(eloop
+  */
+ int eloop_sock_requeue(void);
+ 
++void eloop_add_uloop(void);
++
+ /**
+  * eloop_run - Start the event loop
+  *
+--- /dev/null
++++ b/src/utils/uloop.c
+@@ -0,0 +1,64 @@
++#include <libubox/uloop.h>
++#include "includes.h"
++#include "common.h"
++#include "eloop.h"
++
++static void eloop_uloop_event_cb(int sock, void *eloop_ctx, void *sock_ctx)
++{
++}
++
++static void eloop_uloop_fd_cb(struct uloop_fd *fd, unsigned int events)
++{
++	unsigned int changed = events ^ fd->flags;
++
++	if (changed & ULOOP_READ) {
++		if (events & ULOOP_READ)
++			eloop_register_sock(fd->fd, EVENT_TYPE_READ, eloop_uloop_event_cb, fd, fd);
++		else
++			eloop_unregister_sock(fd->fd, EVENT_TYPE_READ);
++	}
++
++	if (changed & ULOOP_WRITE) {
++		if (events & ULOOP_WRITE)
++			eloop_register_sock(fd->fd, EVENT_TYPE_WRITE, eloop_uloop_event_cb, fd, fd);
++		else
++			eloop_unregister_sock(fd->fd, EVENT_TYPE_WRITE);
++	}
++}
++
++static bool uloop_timeout_poll_handler(struct os_reltime *tv, bool tv_set)
++{
++	struct os_reltime tv_uloop;
++	int timeout_ms = uloop_get_next_timeout();
++
++	if (timeout_ms < 0)
++		return false;
++
++	tv_uloop.sec = timeout_ms / 1000;
++	tv_uloop.usec = (timeout_ms % 1000) * 1000;
++
++	if (!tv_set || os_reltime_before(&tv_uloop, tv)) {
++		*tv = tv_uloop;
++		return true;
++	}
++
++	return false;
++}
++
++static void uloop_poll_handler(void)
++{
++	uloop_run_timeout(0);
++}
++
++void eloop_add_uloop(void)
++{
++	static bool init_done = false;
++
++	if (!init_done) {
++		uloop_init();
++		uloop_fd_set_cb = eloop_uloop_fd_cb;
++		init_done = true;
++	}
++
++	eloop_register_cb(uloop_poll_handler, uloop_timeout_poll_handler);
++}

feeds/hostapd/hostapd/patches/601-ucode_support.patch

@@ -0,0 +1,723 @@
+--- a/hostapd/Makefile
++++ b/hostapd/Makefile
+@@ -168,9 +168,21 @@ OBJS += ../src/eapol_auth/eapol_auth_sm.
+ 
+ ifdef CONFIG_UBUS
+ CFLAGS += -DUBUS_SUPPORT
+-OBJS += ../src/utils/uloop.o
+ OBJS += ../src/ap/ubus.o
+-LIBS += -lubox -lubus
++LIBS += -lubus
++NEED_ULOOP:=y
++endif
++
++ifdef CONFIG_UCODE
++CFLAGS += -DUCODE_SUPPORT
++OBJS += ../src/utils/ucode.o
++OBJS += ../src/ap/ucode.o
++NEED_ULOOP:=y
++endif
++
++ifdef NEED_ULOOP
++OBJS += ../src/utils/uloop.o
++LIBS += -lubox
+ endif
+ 
+ ifdef CONFIG_CODE_COVERAGE
+--- a/hostapd/main.c
++++ b/hostapd/main.c
+@@ -1007,6 +1007,7 @@ int main(int argc, char *argv[])
+ 	}
+ 
+ 	hostapd_global_ctrl_iface_init(&interfaces);
++	hostapd_ucode_init(&interfaces);
+ 
+ 	if (hostapd_global_run(&interfaces, daemonize, pid_file)) {
+ 		wpa_printf(MSG_ERROR, "Failed to start eloop");
+@@ -1016,6 +1017,7 @@ int main(int argc, char *argv[])
+ 	ret = 0;
+ 
+  out:
++	hostapd_ucode_free();
+ 	hostapd_global_ctrl_iface_deinit(&interfaces);
+ 	/* Deinitialize all interfaces */
+ 	for (i = 0; i < interfaces.count; i++) {
+--- a/src/ap/hostapd.h
++++ b/src/ap/hostapd.h
+@@ -19,6 +19,7 @@
+ #include "ap_config.h"
+ #include "drivers/driver.h"
+ #include "ubus.h"
++#include "ucode.h"
+ 
+ #define OCE_STA_CFON_ENABLED(hapd) \
+ 	((hapd->conf->oce & OCE_STA_CFON) && \
+@@ -51,6 +52,10 @@ struct hapd_interfaces {
+ 	struct hostapd_config * (*config_read_cb)(const char *config_fname);
+ 	int (*ctrl_iface_init)(struct hostapd_data *hapd);
+ 	void (*ctrl_iface_deinit)(struct hostapd_data *hapd);
++	int (*ctrl_iface_recv)(struct hostapd_data *hapd,
++			       char *buf, char *reply, int reply_size,
++			       struct sockaddr_storage *from,
++			       socklen_t fromlen);
+ 	int (*for_each_interface)(struct hapd_interfaces *interfaces,
+ 				  int (*cb)(struct hostapd_iface *iface,
+ 					    void *ctx), void *ctx);
+@@ -186,6 +191,7 @@ struct hostapd_data {
+ 	struct hostapd_config *iconf;
+ 	struct hostapd_bss_config *conf;
+ 	struct hostapd_ubus_bss ubus;
++	struct hostapd_ucode_bss ucode;
+ 	int interface_added; /* virtual interface added for this BSS */
+ 	unsigned int started:1;
+ 	unsigned int disabled:1;
+@@ -506,6 +512,7 @@ struct hostapd_sta_info {
+  */
+ struct hostapd_iface {
+ 	struct hapd_interfaces *interfaces;
++	struct hostapd_ucode_iface ucode;
+ 	void *owner;
+ 	char *config_fname;
+ 	struct hostapd_config *conf;
+@@ -706,6 +713,8 @@ struct hostapd_iface * hostapd_init(stru
+ struct hostapd_iface *
+ hostapd_interface_init_bss(struct hapd_interfaces *interfaces, const char *phy,
+ 			   const char *config_fname, int debug);
++int hostapd_setup_bss(struct hostapd_data *hapd, int first, bool start_beacon);
++void hostapd_bss_deinit(struct hostapd_data *hapd);
+ void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta,
+ 			   int reassoc);
+ void hostapd_interface_deinit_free(struct hostapd_iface *iface);
+@@ -732,6 +741,7 @@ hostapd_switch_channel_fallback(struct h
+ void hostapd_cleanup_cs_params(struct hostapd_data *hapd);
+ void hostapd_periodic_iface(struct hostapd_iface *iface);
+ int hostapd_owe_trans_get_info(struct hostapd_data *hapd);
++void hostapd_owe_update_trans(struct hostapd_iface *iface);
+ void hostapd_ocv_check_csa_sa_query(void *eloop_ctx, void *timeout_ctx);
+ 
+ void hostapd_switch_color(struct hostapd_data *hapd, u64 bitmap);
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -252,6 +252,8 @@ int hostapd_reload_config(struct hostapd
+ 	struct hostapd_config *newconf, *oldconf;
+ 	size_t j;
+ 
++	hostapd_ucode_reload_bss(hapd);
++
+ 	if (iface->config_fname == NULL) {
+ 		/* Only in-memory config in use - assume it has been updated */
+ 		hostapd_clear_old(iface);
+@@ -435,6 +437,7 @@ void hostapd_free_hapd_data(struct hosta
+ 	hapd->beacon_set_done = 0;
+ 
+ 	wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface);
++	hostapd_ucode_free_bss(hapd);
+ 	hostapd_ubus_free_bss(hapd);
+ 	accounting_deinit(hapd);
+ 	hostapd_deinit_wpa(hapd);
+@@ -538,7 +541,7 @@ void hostapd_free_hapd_data(struct hosta
+  * Most of the modules that are initialized in hostapd_setup_bss() are
+  * deinitialized here.
+  */
+-static void hostapd_cleanup(struct hostapd_data *hapd)
++void hostapd_cleanup(struct hostapd_data *hapd)
+ {
+ 	wpa_printf(MSG_DEBUG, "%s(hapd=%p (%s))", __func__, hapd,
+ 		   hapd->conf ? hapd->conf->iface : "N/A");
+@@ -600,6 +603,7 @@ void hostapd_cleanup_iface_partial(struc
+ static void hostapd_cleanup_iface(struct hostapd_iface *iface)
+ {
+ 	wpa_printf(MSG_DEBUG, "%s(%p)", __func__, iface);
++	hostapd_ucode_free_iface(iface);
+ 	eloop_cancel_timeout(hostapd_interface_setup_failure_handler, iface,
+ 			     NULL);
+ 
+@@ -1189,6 +1193,7 @@ static int hostapd_start_beacon(struct h
+ 		hapd->driver->set_operstate(hapd->drv_priv, 1);
+ 
+ 	hostapd_ubus_add_bss(hapd);
++	hostapd_ucode_add_bss(hapd);
+ 
+ 	return 0;
+ }
+@@ -1211,7 +1216,7 @@ static int hostapd_start_beacon(struct h
+  * initialized. Most of the modules that are initialized here will be
+  * deinitialized in hostapd_cleanup().
+  */
+-static int hostapd_setup_bss(struct hostapd_data *hapd, int first,
++int hostapd_setup_bss(struct hostapd_data *hapd, int first,
+ 			     bool start_beacon)
+ {
+ 	struct hostapd_bss_config *conf = hapd->conf;
+@@ -2237,7 +2242,7 @@ static int hostapd_owe_iface_iter2(struc
+ #endif /* CONFIG_OWE */
+ 
+ 
+-static void hostapd_owe_update_trans(struct hostapd_iface *iface)
++void hostapd_owe_update_trans(struct hostapd_iface *iface)
+ {
+ #ifdef CONFIG_OWE
+ 	/* Check whether the enabled BSS can complete OWE transition mode
+@@ -2698,7 +2703,7 @@ hostapd_alloc_bss_data(struct hostapd_if
+ }
+ 
+ 
+-static void hostapd_bss_deinit(struct hostapd_data *hapd)
++void hostapd_bss_deinit(struct hostapd_data *hapd)
+ {
+ 	if (!hapd)
+ 		return;
+@@ -3491,7 +3496,8 @@ int hostapd_remove_iface(struct hapd_int
+ 		hapd_iface = interfaces->iface[i];
+ 		if (hapd_iface == NULL)
+ 			return -1;
+-		if (!os_strcmp(hapd_iface->conf->bss[0]->iface, buf)) {
++		if (!os_strcmp(hapd_iface->phy, buf) ||
++		    !os_strcmp(hapd_iface->conf->bss[0]->iface, buf)) {
+ 			wpa_printf(MSG_INFO, "Remove interface '%s'", buf);
+ 			hapd_iface->driver_ap_teardown =
+ 				!!(hapd_iface->drv_flags &
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -195,8 +195,20 @@ endif
+ ifdef CONFIG_UBUS
+ CFLAGS += -DUBUS_SUPPORT
+ OBJS += ubus.o
++LIBS += -lubus
++NEED_ULOOP:=y
++endif
++
++ifdef CONFIG_UCODE
++CFLAGS += -DUCODE_SUPPORT
++OBJS += ../src/utils/ucode.o
++OBJS += ucode.o
++NEED_ULOOP:=y
++endif
++
++ifdef NEED_ULOOP
+ OBJS += ../src/utils/uloop.o
+-LIBS += -lubox -lubus
++LIBS += -lubox
+ endif
+ 
+ ifdef CONFIG_CODE_COVERAGE
+@@ -997,6 +1009,9 @@ OBJS += ../src/ap/ctrl_iface_ap.o
+ ifdef CONFIG_UBUS
+ OBJS += ../src/ap/ubus.o
+ endif
++ifdef CONFIG_UCODE
++OBJS += ../src/ap/ucode.o
++endif
+ endif
+ 
+ CFLAGS += -DEAP_SERVER -DEAP_SERVER_IDENTITY
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -1044,6 +1044,7 @@ void wpa_supplicant_set_state(struct wpa
+ 		sme_sched_obss_scan(wpa_s, 0);
+ 	}
+ 	wpa_s->wpa_state = state;
++	wpas_ucode_update_state(wpa_s);
+ 
+ #ifdef CONFIG_BGSCAN
+ 	if (state == WPA_COMPLETED && wpa_s->current_ssid != wpa_s->bgscan_ssid)
+@@ -7594,6 +7595,7 @@ struct wpa_supplicant * wpa_supplicant_a
+ #endif /* CONFIG_P2P */
+ 
+ 	wpas_ubus_add_bss(wpa_s);
++	wpas_ucode_add_bss(wpa_s);
+ 
+ 	return wpa_s;
+ }
+@@ -7621,6 +7623,7 @@ int wpa_supplicant_remove_iface(struct w
+ 	struct wpa_supplicant *parent = wpa_s->parent;
+ #endif /* CONFIG_MESH */
+ 
++	wpas_ucode_free_bss(wpa_s);
+ 	wpas_ubus_free_bss(wpa_s);
+ 
+ 	/* Remove interface from the global list of interfaces */
+@@ -7931,6 +7934,7 @@ struct wpa_global * wpa_supplicant_init(
+ 
+ 	eloop_register_timeout(WPA_SUPPLICANT_CLEANUP_INTERVAL, 0,
+ 			       wpas_periodic, global, NULL);
++	wpas_ucode_init(global);
+ 
+ 	return global;
+ }
+@@ -7969,12 +7973,8 @@ int wpa_supplicant_run(struct wpa_global
+ 	eloop_register_signal_terminate(wpa_supplicant_terminate, global);
+ 	eloop_register_signal_reconfig(wpa_supplicant_reconfig, global);
+ 
+-	wpas_ubus_add(global);
+-
+ 	eloop_run();
+ 
+-	wpas_ubus_free(global);
+-
+ 	return 0;
+ }
+ 
+@@ -8007,6 +8007,8 @@ void wpa_supplicant_deinit(struct wpa_gl
+ 
+ 	wpas_notify_supplicant_deinitialized(global);
+ 
++	wpas_ucode_free();
++
+ 	eap_peer_unregister_methods();
+ #ifdef CONFIG_AP
+ 	eap_server_unregister_methods();
+--- a/wpa_supplicant/wpa_supplicant_i.h
++++ b/wpa_supplicant/wpa_supplicant_i.h
+@@ -22,6 +22,7 @@
+ #include "wmm_ac.h"
+ #include "pasn/pasn_common.h"
+ #include "ubus.h"
++#include "ucode.h"
+ 
+ extern const char *const wpa_supplicant_version;
+ extern const char *const wpa_supplicant_license;
+@@ -689,6 +690,7 @@ struct wpa_supplicant {
+ 	unsigned char perm_addr[ETH_ALEN];
+ 	char ifname[100];
+ 	struct wpas_ubus_bss ubus;
++	struct wpas_ucode_bss ucode;
+ #ifdef CONFIG_MATCH_IFACE
+ 	int matched;
+ #endif /* CONFIG_MATCH_IFACE */
+--- a/hostapd/ctrl_iface.c
++++ b/hostapd/ctrl_iface.c
+@@ -4856,6 +4856,7 @@ try_again:
+ 		return -1;
+ 	}
+ 
++	interface->ctrl_iface_recv = hostapd_ctrl_iface_receive_process;
+ 	wpa_msg_register_cb(hostapd_ctrl_iface_msg_cb);
+ 
+ 	return 0;
+@@ -4957,6 +4958,7 @@ fail:
+ 	os_free(fname);
+ 
+ 	interface->global_ctrl_sock = s;
++	interface->ctrl_iface_recv = hostapd_ctrl_iface_receive_process;
+ 	eloop_register_read_sock(s, hostapd_global_ctrl_iface_receive,
+ 				 interface, NULL);
+ 
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -3787,6 +3787,25 @@ struct wpa_driver_ops {
+ 			 const char *ifname);
+ 
+ 	/**
++	 * if_rename - Rename a virtual interface
++	 * @priv: Private driver interface data
++	 * @type: Interface type
++	 * @ifname: Interface name of the virtual interface to be renamed
++	 *	    (NULL when renaming the AP BSS interface)
++	 * @new_name: New interface name of the virtual interface
++	 * Returns: 0 on success, -1 on failure
++	 */
++	int (*if_rename)(void *priv, enum wpa_driver_if_type type,
++			 const char *ifname, const char *new_name);
++
++	/**
++	 * set_first_bss - Make a virtual interface the first (primary) bss
++	 * @priv: Private driver interface data
++	 * Returns: 0 on success, -1 on failure
++	 */
++	int (*set_first_bss)(void *priv);
++
++	/**
+ 	 * set_sta_vlan - Bind a station into a specific interface (AP only)
+ 	 * @priv: Private driver interface data
+ 	 * @ifname: Interface (main or virtual BSS or VLAN)
+@@ -6440,6 +6459,7 @@ union wpa_event_data {
+ 
+ 	/**
+ 	 * struct ch_switch
++	 * @count: Count until channel switch activates
+ 	 * @freq: Frequency of new channel in MHz
+ 	 * @ht_enabled: Whether this is an HT channel
+ 	 * @ch_offset: Secondary channel offset
+@@ -6450,6 +6470,7 @@ union wpa_event_data {
+ 	 * @punct_bitmap: Puncturing bitmap
+ 	 */
+ 	struct ch_switch {
++		int count;
+ 		int freq;
+ 		int ht_enabled;
+ 		int ch_offset;
+--- a/src/drivers/driver_nl80211_event.c
++++ b/src/drivers/driver_nl80211_event.c
+@@ -1202,6 +1202,7 @@ static void mlme_event_ch_switch(struct
+ 				 struct nlattr *bw, struct nlattr *cf1,
+ 				 struct nlattr *cf2,
+ 				 struct nlattr *punct_bitmap,
++				 struct nlattr *count,
+ 				 int finished)
+ {
+ 	struct i802_bss *bss;
+@@ -1265,6 +1266,8 @@ static void mlme_event_ch_switch(struct
+ 		data.ch_switch.cf1 = nla_get_u32(cf1);
+ 	if (cf2)
+ 		data.ch_switch.cf2 = nla_get_u32(cf2);
++	if (count)
++		data.ch_switch.count = nla_get_u32(count);
+ 
+ 	if (finished)
+ 		bss->flink->freq = data.ch_switch.freq;
+@@ -3912,6 +3915,7 @@ static void do_process_drv_event(struct
+ 				     tb[NL80211_ATTR_CENTER_FREQ1],
+ 				     tb[NL80211_ATTR_CENTER_FREQ2],
+ 				     tb[NL80211_ATTR_PUNCT_BITMAP],
++				     tb[NL80211_ATTR_CH_SWITCH_COUNT],
+ 				     0);
+ 		break;
+ 	case NL80211_CMD_CH_SWITCH_NOTIFY:
+@@ -3924,6 +3928,7 @@ static void do_process_drv_event(struct
+ 				     tb[NL80211_ATTR_CENTER_FREQ1],
+ 				     tb[NL80211_ATTR_CENTER_FREQ2],
+ 				     tb[NL80211_ATTR_PUNCT_BITMAP],
++					 NULL,
+ 				     1);
+ 		break;
+ 	case NL80211_CMD_DISCONNECT:
+--- a/wpa_supplicant/events.c
++++ b/wpa_supplicant/events.c
+@@ -5389,6 +5389,7 @@ void supplicant_event(void *ctx, enum wp
+ 		event_to_string(event), event);
+ #endif /* CONFIG_NO_STDOUT_DEBUG */
+ 
++	wpas_ucode_event(wpa_s, event, data);
+ 	switch (event) {
+ 	case EVENT_AUTH:
+ #ifdef CONFIG_FST
+--- a/src/ap/ap_drv_ops.h
++++ b/src/ap/ap_drv_ops.h
+@@ -393,6 +393,23 @@ static inline int hostapd_drv_stop_ap(st
+ 	return hapd->driver->stop_ap(hapd->drv_priv);
+ }
+ 
++static inline int hostapd_drv_if_rename(struct hostapd_data *hapd,
++					enum wpa_driver_if_type type,
++					const char *ifname,
++					const char *new_name)
++{
++	if (!hapd->driver || !hapd->driver->if_rename || !hapd->drv_priv)
++		return -1;
++	return hapd->driver->if_rename(hapd->drv_priv, type, ifname, new_name);
++}
++
++static inline int hostapd_drv_set_first_bss(struct hostapd_data *hapd)
++{
++	if (!hapd->driver || !hapd->driver->set_first_bss || !hapd->drv_priv)
++		return 0;
++	return hapd->driver->set_first_bss(hapd->drv_priv);
++}
++
+ static inline int hostapd_drv_channel_info(struct hostapd_data *hapd,
+ 					   struct wpa_channel_info *ci)
+ {
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -1333,7 +1333,7 @@ static void wpa_driver_nl80211_event_rtm
+ 		}
+ 		wpa_printf(MSG_DEBUG, "nl80211: Interface down (%s/%s)",
+ 			   namebuf, ifname);
+-		if (os_strcmp(drv->first_bss->ifname, ifname) != 0) {
++		if (drv->first_bss->ifindex != ifi->ifi_index) {
+ 			wpa_printf(MSG_DEBUG,
+ 				   "nl80211: Not the main interface (%s) - do not indicate interface down",
+ 				   drv->first_bss->ifname);
+@@ -1369,7 +1369,7 @@ static void wpa_driver_nl80211_event_rtm
+ 		}
+ 		wpa_printf(MSG_DEBUG, "nl80211: Interface up (%s/%s)",
+ 			   namebuf, ifname);
+-		if (os_strcmp(drv->first_bss->ifname, ifname) != 0) {
++		if (drv->first_bss->ifindex != ifi->ifi_index) {
+ 			wpa_printf(MSG_DEBUG,
+ 				   "nl80211: Not the main interface (%s) - do not indicate interface up",
+ 				   drv->first_bss->ifname);
+@@ -8432,6 +8432,7 @@ static void *i802_init(struct hostapd_da
+ 	char master_ifname[IFNAMSIZ];
+ 	int ifindex, br_ifindex = 0;
+ 	int br_added = 0;
++	int err;
+ 
+ 	bss = wpa_driver_nl80211_drv_init(hapd, params->ifname,
+ 					  params->global_priv, 1,
+@@ -8491,21 +8492,17 @@ static void *i802_init(struct hostapd_da
+ 	    (params->num_bridge == 0 || !params->bridge[0]))
+ 		add_ifidx(drv, br_ifindex, drv->ifindex);
+ 
+-	if (bss->added_if_into_bridge || bss->already_in_bridge) {
+-		int err;
+-
+-		drv->rtnl_sk = nl_socket_alloc();
+-		if (drv->rtnl_sk == NULL) {
+-			wpa_printf(MSG_ERROR, "nl80211: Failed to allocate nl_sock");
+-			goto failed;
+-		}
++	drv->rtnl_sk = nl_socket_alloc();
++	if (drv->rtnl_sk == NULL) {
++		wpa_printf(MSG_ERROR, "nl80211: Failed to allocate nl_sock");
++		goto failed;
++	}
+ 
+-		err = nl_connect(drv->rtnl_sk, NETLINK_ROUTE);
+-		if (err) {
+-			wpa_printf(MSG_ERROR, "nl80211: Failed to connect nl_sock to NETLINK_ROUTE: %s",
+-				   nl_geterror(err));
+-			goto failed;
+-		}
++	err = nl_connect(drv->rtnl_sk, NETLINK_ROUTE);
++	if (err) {
++		wpa_printf(MSG_ERROR, "nl80211: Failed to connect nl_sock to NETLINK_ROUTE: %s",
++			   nl_geterror(err));
++		goto failed;
+ 	}
+ 
+ 	if (drv->capa.flags2 & WPA_DRIVER_FLAGS2_CONTROL_PORT_RX) {
+@@ -8875,6 +8872,50 @@ static int wpa_driver_nl80211_if_remove(
+ 	return 0;
+ }
+ 
++static int wpa_driver_nl80211_if_rename(struct i802_bss *bss,
++					enum wpa_driver_if_type type,
++					const char *ifname, const char *new_name)
++{
++	struct wpa_driver_nl80211_data *drv = bss->drv;
++	struct ifinfomsg ifi = {
++		.ifi_family = AF_UNSPEC,
++		.ifi_index = bss->ifindex,
++	};
++	struct nl_msg *msg;
++	int res = -ENOMEM;
++
++	if (ifname)
++		ifi.ifi_index = if_nametoindex(ifname);
++
++	msg = nlmsg_alloc_simple(RTM_SETLINK, 0);
++	if (!msg)
++		return res;
++
++	if (nlmsg_append(msg, &ifi, sizeof(ifi), NLMSG_ALIGNTO) < 0)
++		goto out;
++
++	if (nla_put_string(msg, IFLA_IFNAME, new_name))
++		goto out;
++
++	res = nl_send_auto_complete(drv->rtnl_sk, msg);
++	if (res < 0)
++		goto out;
++
++	res = nl_wait_for_ack(drv->rtnl_sk);
++	if (res) {
++		wpa_printf(MSG_INFO,
++			   "nl80211: Renaming device %s to %s failed: %s",
++			   ifname ? ifname : bss->ifname, new_name, nl_geterror(res));
++		goto out;
++	}
++
++	if (type == WPA_IF_AP_BSS && !ifname)
++		os_strlcpy(bss->ifname, new_name, sizeof(bss->ifname));
++
++out:
++	nlmsg_free(msg);
++	return res;
++}
+ 
+ static int cookie_handler(struct nl_msg *msg, void *arg)
+ {
+@@ -10513,6 +10554,37 @@ static int driver_nl80211_if_remove(void
+ }
+ 
+ 
++static int driver_nl80211_if_rename(void *priv, enum wpa_driver_if_type type,
++				    const char *ifname, const char *new_name)
++{
++	struct i802_bss *bss = priv;
++	return wpa_driver_nl80211_if_rename(bss, type, ifname, new_name);
++}
++
++
++static int driver_nl80211_set_first_bss(void *priv)
++{
++	struct i802_bss *bss = priv, *tbss;
++	struct wpa_driver_nl80211_data *drv = bss->drv;
++
++	if (drv->first_bss == bss)
++		return 0;
++
++	for (tbss = drv->first_bss; tbss; tbss = tbss->next) {
++		if (tbss->next != bss)
++			continue;
++
++		tbss->next = bss->next;
++		bss->next = drv->first_bss;
++		drv->first_bss = bss;
++		drv->ctx = bss->ctx;
++		return 0;
++	}
++
++	return -1;
++}
++
++
+ static int driver_nl80211_send_mlme(void *priv, const u8 *data,
+ 				    size_t data_len, int noack,
+ 				    unsigned int freq,
+@@ -13697,6 +13769,8 @@ const struct wpa_driver_ops wpa_driver_n
+ 	.set_acl = wpa_driver_nl80211_set_acl,
+ 	.if_add = wpa_driver_nl80211_if_add,
+ 	.if_remove = driver_nl80211_if_remove,
++	.if_rename = driver_nl80211_if_rename,
++	.set_first_bss = driver_nl80211_set_first_bss,
+ 	.send_mlme = driver_nl80211_send_mlme,
+ 	.get_hw_feature_data = nl80211_get_hw_feature_data,
+ 	.sta_add = wpa_driver_nl80211_sta_add,
+--- a/src/ap/ieee802_11.c
++++ b/src/ap/ieee802_11.c
+@@ -547,11 +547,16 @@ static const char * sae_get_password(str
+ 				     struct sae_pt **s_pt,
+ 				     const struct sae_pk **s_pk)
+ {
++	struct hostapd_bss_config *conf = hapd->conf;
++	struct hostapd_ssid *ssid = &conf->ssid;
++	struct hostapd_sta_wpa_psk_short *psk;
+ 	const char *password = NULL;
+-	struct sae_password_entry *pw;
+-	struct sae_pt *pt = NULL;
+-	const struct sae_pk *pk = NULL;
+-	struct hostapd_sta_wpa_psk_short *psk = NULL;
++	struct sae_password_entry *pw = NULL;
++ 	struct sae_pt *pt = NULL;
++ 	const struct sae_pk *pk = NULL;
++ 
++	if (sta && sta->use_sta_psk)
++		goto use_sta_psk;
+ 
+ 	for (pw = hapd->conf->sae_passwords; pw; pw = pw->next) {
+ 		if (!is_broadcast_ether_addr(pw->peer_addr) &&
+@@ -582,6 +587,31 @@ static const char * sae_get_password(str
+ 		}
+ 	}
+ 
++use_sta_psk:
++	if (!password && sta) {
++		for (psk = sta->psk; psk; psk = psk->next) {
++			if (!psk->is_passphrase)
++				continue;
++
++			password = psk->passphrase;
++			if (!sta->use_sta_psk)
++				break;
++
++			if (sta->sae_pt) {
++				pt = sta->sae_pt;
++				break;
++			}
++
++			pt = sae_derive_pt(conf->sae_groups, ssid->ssid,
++					   ssid->ssid_len,
++					   (const u8 *) password,
++					   os_strlen(password),
++					   NULL);
++			sta->sae_pt = pt;
++			break;
++		}
++	}
++
+ 	if (pw_entry)
+ 		*pw_entry = pw;
+ 	if (s_pt)
+@@ -3105,6 +3135,12 @@ static void handle_auth(struct hostapd_d
+ 		goto fail;
+ 	}
+ 
++	res = hostapd_ucode_sta_auth(hapd, sta);
++	if (res) {
++		resp = res;
++		goto fail;
++	}
++
+ 	sta->flags &= ~WLAN_STA_PREAUTH;
+ 	ieee802_1x_notify_pre_auth(sta->eapol_sm, 0);
+ 
+--- a/src/ap/sta_info.c
++++ b/src/ap/sta_info.c
+@@ -425,6 +425,9 @@ void ap_free_sta(struct hostapd_data *ha
+ 	forced_memzero(sta->last_tk, WPA_TK_MAX_LEN);
+ #endif /* CONFIG_TESTING_OPTIONS */
+ 
++	if (sta->sae_pt)
++		sae_deinit_pt(sta->sae_pt);
++
+ 	os_free(sta);
+ }
+ 
+@@ -1326,6 +1329,8 @@ void ap_sta_set_authorized(struct hostap
+ 		sta->flags &= ~WLAN_STA_AUTHORIZED;
+ 	}
+ 
++	if (authorized)
++		hostapd_ucode_sta_connected(hapd, sta);
+ #ifdef CONFIG_P2P
+ 	if (hapd->p2p_group == NULL) {
+ 		if (sta->p2p_ie != NULL &&
+--- a/src/ap/sta_info.h
++++ b/src/ap/sta_info.h
+@@ -198,6 +198,9 @@ struct sta_info {
+ 	int vlan_id_bound; /* updated by ap_sta_bind_vlan() */
+ 	 /* PSKs from RADIUS authentication server */
+ 	struct hostapd_sta_wpa_psk_short *psk;
++	struct sae_pt *sae_pt;
++	int use_sta_psk;
++	int psk_idx;
+ 
+ 	char *identity; /* User-Name from RADIUS */
+ 	char *radius_cui; /* Chargeable-User-Identity from RADIUS */
+--- a/src/ap/wpa_auth_glue.c
++++ b/src/ap/wpa_auth_glue.c
+@@ -341,6 +341,7 @@ static const u8 * hostapd_wpa_auth_get_p
+ 	struct sta_info *sta = ap_get_sta(hapd, addr);
+ 	const u8 *psk;
+ 
++	sta->psk_idx = 0;
+ 	if (vlan_id)
+ 		*vlan_id = 0;
+ 	if (psk_len)
+@@ -387,13 +388,18 @@ static const u8 * hostapd_wpa_auth_get_p
+ 	 * returned psk which should not be returned again.
+ 	 * logic list (all hostapd_get_psk; all sta->psk)
+ 	 */
++	if (sta && sta->use_sta_psk)
++		psk = NULL;
+ 	if (sta && sta->psk && !psk) {
+ 		struct hostapd_sta_wpa_psk_short *pos;
++		int psk_idx;
+ 
+ 		if (vlan_id)
+ 			*vlan_id = 0;
+ 		psk = sta->psk->psk;
++		sta->psk_idx = psk_idx = 1;
+ 		for (pos = sta->psk; pos; pos = pos->next) {
++			psk_idx++;
+ 			if (pos->is_passphrase) {
+ 				if (pbkdf2_sha1(pos->passphrase,
+ 						hapd->conf->ssid.ssid,
+@@ -406,10 +412,14 @@ static const u8 * hostapd_wpa_auth_get_p
+ 				pos->is_passphrase = 0;
+ 			}
+ 			if (pos->psk == prev_psk) {
++				sta->psk_idx = psk_idx;
+ 				psk = pos->next ? pos->next->psk : NULL;
+ 				break;
+ 			}
+ 		}
++
++		if (!psk)
++			sta->psk_idx = 0;
+ 	}
+ 	return psk;
+ }

feeds/hostapd/hostapd/patches/711-wds_bridge_force.patch

@@ -0,0 +1,22 @@
+--- a/hostapd/config_file.c
++++ b/hostapd/config_file.c
+@@ -2318,6 +2318,8 @@ static int hostapd_config_fill(struct ho
+ 			   sizeof(conf->bss[0]->iface));
+ 	} else if (os_strcmp(buf, "bridge") == 0) {
+ 		os_strlcpy(bss->bridge, pos, sizeof(bss->bridge));
++		if (!bss->wds_bridge[0])
++			os_strlcpy(bss->wds_bridge, pos, sizeof(bss->wds_bridge));
+ 	} else if (os_strcmp(buf, "bridge_hairpin") == 0) {
+ 		bss->bridge_hairpin = atoi(pos);
+ 	} else if (os_strcmp(buf, "vlan_bridge") == 0) {
+--- a/src/ap/ap_drv_ops.c
++++ b/src/ap/ap_drv_ops.c
+@@ -348,8 +348,6 @@ int hostapd_set_wds_sta(struct hostapd_d
+ 		return -1;
+ 	if (hapd->conf->wds_bridge[0])
+ 		bridge = hapd->conf->wds_bridge;
+-	else if (hapd->conf->bridge[0])
+-		bridge = hapd->conf->bridge;
+ 	return hapd->driver->set_wds_sta(hapd->drv_priv, addr, aid, val,
+ 					 bridge, ifname_wds);
+ }

feeds/hostapd/hostapd/patches/720-iface_max_num_sta.patch

@@ -0,0 +1,81 @@
+--- a/hostapd/config_file.c
++++ b/hostapd/config_file.c
+@@ -2848,6 +2848,14 @@ static int hostapd_config_fill(struct ho
+ 				   line, bss->max_num_sta, MAX_STA_COUNT);
+ 			return 1;
+ 		}
++	} else if (os_strcmp(buf, "iface_max_num_sta") == 0) {
++		conf->max_num_sta = atoi(pos);
++		if (conf->max_num_sta < 0 ||
++		    conf->max_num_sta > MAX_STA_COUNT) {
++			wpa_printf(MSG_ERROR, "Line %d: Invalid max_num_sta=%d; allowed range 0..%d",
++				   line, conf->max_num_sta, MAX_STA_COUNT);
++			return 1;
++		}
+ 	} else if (os_strcmp(buf, "wpa") == 0) {
+ 		bss->wpa = atoi(pos);
+ 	} else if (os_strcmp(buf, "extended_key_id") == 0) {
+--- a/src/ap/hostapd.h
++++ b/src/ap/hostapd.h
+@@ -742,6 +742,7 @@ void hostapd_cleanup_cs_params(struct ho
+ void hostapd_periodic_iface(struct hostapd_iface *iface);
+ int hostapd_owe_trans_get_info(struct hostapd_data *hapd);
+ void hostapd_ocv_check_csa_sa_query(void *eloop_ctx, void *timeout_ctx);
++int hostapd_check_max_sta(struct hostapd_data *hapd);
+ 
+ void hostapd_switch_color(struct hostapd_data *hapd, u64 bitmap);
+ void hostapd_cleanup_cca_params(struct hostapd_data *hapd);
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -244,6 +244,29 @@ static int hostapd_iface_conf_changed(st
+ 	return 0;
+ }
+ 
++static inline int hostapd_iface_num_sta(struct hostapd_iface *iface)
++{
++	int num_sta = 0;
++	int i;
++
++	for (i = 0; i < iface->num_bss; i++)
++		num_sta += iface->bss[i]->num_sta;
++
++	return num_sta;
++}
++
++
++int hostapd_check_max_sta(struct hostapd_data *hapd)
++{
++	if (hapd->num_sta >= hapd->conf->max_num_sta)
++		return 1;
++
++	if (hapd->iconf->max_num_sta &&
++	    hostapd_iface_num_sta(hapd->iface) >= hapd->iconf->max_num_sta)
++		return 1;
++
++	return 0;
++}
+ 
+ int hostapd_reload_config(struct hostapd_iface *iface)
+ {
+--- a/src/ap/beacon.c
++++ b/src/ap/beacon.c
+@@ -1252,7 +1252,7 @@ void handle_probe_req(struct hostapd_dat
+ 	if (hapd->conf->no_probe_resp_if_max_sta &&
+ 	    is_multicast_ether_addr(mgmt->da) &&
+ 	    is_multicast_ether_addr(mgmt->bssid) &&
+-	    hapd->num_sta >= hapd->conf->max_num_sta &&
++	    hostapd_check_max_sta(hapd) &&
+ 	    !ap_get_sta(hapd, mgmt->sa)) {
+ 		wpa_printf(MSG_MSGDUMP, "%s: Ignore Probe Request from " MACSTR
+ 			   " since no room for additional STA",
+--- a/src/ap/ap_config.h
++++ b/src/ap/ap_config.h
+@@ -1039,6 +1039,8 @@ struct hostapd_config {
+ 	unsigned int track_sta_max_num;
+ 	unsigned int track_sta_max_age;
+ 
++	int max_num_sta;
++
+ 	char country[3]; /* first two octets: country code as described in
+ 			  * ISO/IEC 3166-1. Third octet:
+ 			  * ' ' (ascii 32): all environments

feeds/hostapd/hostapd/patches/740-snoop_iface.patch

@@ -0,0 +1,139 @@
+--- a/src/ap/ap_config.h
++++ b/src/ap/ap_config.h
+@@ -284,6 +284,7 @@ struct hostapd_bss_config {
+ 	char iface[IFNAMSIZ + 1];
+ 	char bridge[IFNAMSIZ + 1];
+ 	char ft_iface[IFNAMSIZ + 1];
++	char snoop_iface[IFNAMSIZ + 1];
+ 	char vlan_bridge[IFNAMSIZ + 1];
+ 	char wds_bridge[IFNAMSIZ + 1];
+ 	int bridge_hairpin; /* hairpin_mode on bridge members */
+--- a/src/ap/x_snoop.c
++++ b/src/ap/x_snoop.c
+@@ -33,28 +33,31 @@ int x_snoop_init(struct hostapd_data *ha
+ 
+ 	hapd->x_snoop_initialized = true;
+ 
+-	if (hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_HAIRPIN_MODE,
++	if (!conf->snoop_iface[0] &&
++	    hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_HAIRPIN_MODE,
+ 					 1)) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "x_snoop: Failed to enable hairpin_mode on the bridge port");
+ 		return -1;
+ 	}
+ 
+-	if (hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_PROXYARP, 1)) {
++	if (!conf->snoop_iface[0] &&
++	    hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_PROXYARP, 1)) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "x_snoop: Failed to enable proxyarp on the bridge port");
+ 		return -1;
+ 	}
+ 
+ 	if (hostapd_drv_br_set_net_param(hapd, DRV_BR_NET_PARAM_GARP_ACCEPT,
+-					 1)) {
++					 conf->snoop_iface[0] ? conf->snoop_iface : NULL, 1)) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "x_snoop: Failed to enable accepting gratuitous ARP on the bridge");
+ 		return -1;
+ 	}
+ 
+ #ifdef CONFIG_IPV6
+-	if (hostapd_drv_br_set_net_param(hapd, DRV_BR_MULTICAST_SNOOPING, 1)) {
++	if (!conf->snoop_iface[0] &&
++	    hostapd_drv_br_set_net_param(hapd, DRV_BR_MULTICAST_SNOOPING, NULL, 1)) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "x_snoop: Failed to enable multicast snooping on the bridge");
+ 		return -1;
+@@ -73,8 +76,12 @@ x_snoop_get_l2_packet(struct hostapd_dat
+ {
+ 	struct hostapd_bss_config *conf = hapd->conf;
+ 	struct l2_packet_data *l2;
++	const char *ifname = conf->bridge;
++
++	if (conf->snoop_iface[0])
++		ifname = conf->snoop_iface;
+ 
+-	l2 = l2_packet_init(conf->bridge, NULL, ETH_P_ALL, handler, hapd, 1);
++	l2 = l2_packet_init(ifname, NULL, ETH_P_ALL, handler, hapd, 1);
+ 	if (l2 == NULL) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "x_snoop: Failed to initialize L2 packet processing %s",
+@@ -127,9 +134,12 @@ void x_snoop_mcast_to_ucast_convert_send
+ 
+ void x_snoop_deinit(struct hostapd_data *hapd)
+ {
++	struct hostapd_bss_config *conf = hapd->conf;
++
+ 	if (!hapd->x_snoop_initialized)
+ 		return;
+-	hostapd_drv_br_set_net_param(hapd, DRV_BR_NET_PARAM_GARP_ACCEPT, 0);
++	hostapd_drv_br_set_net_param(hapd, DRV_BR_NET_PARAM_GARP_ACCEPT,
++				     conf->snoop_iface[0] ? conf->snoop_iface : NULL, 0);
+ 	hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_PROXYARP, 0);
+ 	hostapd_drv_br_port_set_attr(hapd, DRV_BR_PORT_ATTR_HAIRPIN_MODE, 0);
+ 	hapd->x_snoop_initialized = false;
+--- a/hostapd/config_file.c
++++ b/hostapd/config_file.c
+@@ -2322,6 +2322,8 @@ static int hostapd_config_fill(struct ho
+ 			os_strlcpy(bss->wds_bridge, pos, sizeof(bss->wds_bridge));
+ 	} else if (os_strcmp(buf, "bridge_hairpin") == 0) {
+ 		bss->bridge_hairpin = atoi(pos);
++	} else if (os_strcmp(buf, "snoop_iface") == 0) {
++		os_strlcpy(bss->snoop_iface, pos, sizeof(bss->snoop_iface));
+ 	} else if (os_strcmp(buf, "vlan_bridge") == 0) {
+ 		os_strlcpy(bss->vlan_bridge, pos, sizeof(bss->vlan_bridge));
+ 	} else if (os_strcmp(buf, "wds_bridge") == 0) {
+--- a/src/ap/ap_drv_ops.h
++++ b/src/ap/ap_drv_ops.h
+@@ -366,12 +366,12 @@ static inline int hostapd_drv_br_port_se
+ 
+ static inline int hostapd_drv_br_set_net_param(struct hostapd_data *hapd,
+ 					       enum drv_br_net_param param,
+-					       unsigned int val)
++					       const char *ifname, unsigned int val)
+ {
+ 	if (hapd->driver == NULL || hapd->drv_priv == NULL ||
+ 	    hapd->driver->br_set_net_param == NULL)
+ 		return -1;
+-	return hapd->driver->br_set_net_param(hapd->drv_priv, param, val);
++	return hapd->driver->br_set_net_param(hapd->drv_priv, param, ifname, val);
+ }
+ 
+ static inline int hostapd_drv_vendor_cmd(struct hostapd_data *hapd,
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -4209,7 +4209,7 @@ struct wpa_driver_ops {
+ 	 * Returns: 0 on success, negative (<0) on failure
+ 	 */
+ 	int (*br_set_net_param)(void *priv, enum drv_br_net_param param,
+-				unsigned int val);
++				const char *ifname, unsigned int val);
+ 
+ 	/**
+ 	 * get_wowlan - Get wake-on-wireless status
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -12168,7 +12168,7 @@ static const char * drv_br_net_param_str
+ 
+ 
+ static int wpa_driver_br_set_net_param(void *priv, enum drv_br_net_param param,
+-				       unsigned int val)
++				       const char *ifname, unsigned int val)
+ {
+ 	struct i802_bss *bss = priv;
+ 	char path[128];
+@@ -12194,8 +12194,11 @@ static int wpa_driver_br_set_net_param(v
+ 			return -EINVAL;
+ 	}
+ 
++	if (!ifname)
++		ifname = bss->brname;
++
+ 	os_snprintf(path, sizeof(path), "/proc/sys/net/ipv%d/conf/%s/%s",
+-		    ip_version, bss->brname, param_txt);
++		    ip_version, ifname, param_txt);
+ 
+ set_val:
+ 	if (linux_write_system_file(path, val))

feeds/hostapd/hostapd/patches/750-wispr.patch

@@ -0,0 +1,113 @@
+Index: hostapd-2021-02-20-59e9794c/src/ap/ieee802_1x.c
+===================================================================
+--- hostapd-2021-02-20-59e9794c.orig/src/ap/ieee802_1x.c
++++ hostapd-2021-02-20-59e9794c/src/ap/ieee802_1x.c
+@@ -1904,6 +1904,25 @@ static int ieee802_1x_update_vlan(struct
+ }
+ #endif /* CONFIG_NO_VLAN */
+ 
++static int ieee802_1x_update_wispr(struct hostapd_data *hapd,
++				   struct sta_info *sta,
++				   struct radius_msg *msg)
++{
++	memset(sta->bandwidth, 0, sizeof(sta->bandwidth));
++
++	if (radius_msg_get_wispr(msg, &sta->bandwidth))
++		return 0;
++
++	if (!sta->bandwidth[0] && !sta->bandwidth[1])
++		return 0;
++
++	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE8021X,
++		       HOSTAPD_LEVEL_INFO,
++		       "received wispr bandwidth from RADIUS server %d/%d",
++		       sta->bandwidth[0], sta->bandwidth[1]);
++
++	return 0;
++}
+ 
+ /**
+  * ieee802_1x_receive_auth - Process RADIUS frames from Authentication Server
+@@ -2029,6 +2048,7 @@ ieee802_1x_receive_auth(struct radius_ms
+ 		ieee802_1x_check_hs20(hapd, sta, msg,
+ 				      session_timeout_set ?
+ 				      (int) session_timeout : -1);
++		ieee802_1x_update_wispr(hapd, sta, msg);
+ 		break;
+ 	case RADIUS_CODE_ACCESS_REJECT:
+ 		sm->eap_if->aaaFail = true;
+Index: hostapd-2021-02-20-59e9794c/src/ap/sta_info.h
+===================================================================
+--- hostapd-2021-02-20-59e9794c.orig/src/ap/sta_info.h
++++ hostapd-2021-02-20-59e9794c/src/ap/sta_info.h
+@@ -117,6 +117,7 @@ struct sta_info {
+ 	u8 supported_rates[WLAN_SUPP_RATES_MAX];
+ 	int supported_rates_len;
+ 	u8 qosinfo; /* Valid when WLAN_STA_WMM is set */
++	u32 bandwidth[2];
+ 
+ #ifdef CONFIG_MESH
+ 	enum mesh_plink_state plink_state;
+Index: hostapd-2021-02-20-59e9794c/src/radius/radius.c
+===================================================================
+--- hostapd-2021-02-20-59e9794c.orig/src/radius/radius.c
++++ hostapd-2021-02-20-59e9794c/src/radius/radius.c
+@@ -1182,6 +1182,35 @@ radius_msg_get_cisco_keys(struct radius_
+ 	return keys;
+ }
+ 
++#define RADIUS_VENDOR_ID_WISPR	14122
++#define RADIUS_WISPR_AV_BW_UP	7
++#define RADIUS_WISPR_AV_BW_DOWN	8
++
++int
++radius_msg_get_wispr(struct radius_msg *msg, u32 *bandwidth)
++{
++	int i;
++
++	if (msg == NULL || bandwidth == NULL)
++		return 1;
++
++	for (i = 0; i < 2; i++) {
++		size_t keylen;
++		u8 *key;
++
++		key = radius_msg_get_vendor_attr(msg, RADIUS_VENDOR_ID_WISPR,
++						 RADIUS_WISPR_AV_BW_UP + i, &keylen);
++		if (!key)
++			continue;
++
++		if (keylen == 4)
++			bandwidth[i] = ntohl(*((u32 *)key));
++		os_free(key);
++	}
++
++	return 0;
++}
++
+ 
+ int radius_msg_add_mppe_keys(struct radius_msg *msg,
+ 			     const u8 *req_authenticator,
+Index: hostapd-2021-02-20-59e9794c/src/radius/radius.h
+===================================================================
+--- hostapd-2021-02-20-59e9794c.orig/src/radius/radius.h
++++ hostapd-2021-02-20-59e9794c/src/radius/radius.h
+@@ -205,6 +205,10 @@ enum {
+ 	RADIUS_VENDOR_ATTR_WFA_HS20_T_C_URL = 10,
+ };
+ 
++#define RADIUS_VENDOR_ID_WISPR	14122
++#define RADIUS_WISPR_AV_BW_UP	7
++#define RADIUS_WISPR_AV_BW_DOWN	8
++
+ #ifdef _MSC_VER
+ #pragma pack(pop)
+ #endif /* _MSC_VER */
+@@ -277,6 +281,7 @@ radius_msg_get_ms_keys(struct radius_msg
+ struct radius_ms_mppe_keys *
+ radius_msg_get_cisco_keys(struct radius_msg *msg, struct radius_msg *sent_msg,
+ 			  const u8 *secret, size_t secret_len);
++int radius_msg_get_wispr(struct radius_msg *msg, u32 *bandwidth);
+ int radius_msg_add_mppe_keys(struct radius_msg *msg,
+ 			     const u8 *req_authenticator,
+ 			     const u8 *secret, size_t secret_len,

feeds/hostapd/hostapd/patches/751-wispr-ft.patch

@@ -0,0 +1,539 @@
+--- a/src/ap/wpa_auth.h
++++ b/src/ap/wpa_auth.h
+@@ -16,7 +16,11 @@
+ 
+ struct vlan_description;
+ struct mld_info;
+-
++struct rate_description {
++	u32 rx;
++	u32 tx;
++};
++ 
+ #define MAX_OWN_IE_OVERRIDE 256
+ 
+ #ifdef _MSC_VER
+@@ -88,6 +92,7 @@ struct ft_rrb_frame {
+ #define FT_RRB_IDENTITY      15
+ #define FT_RRB_RADIUS_CUI    16
+ #define FT_RRB_SESSION_TIMEOUT  17 /* le32 seconds */
++#define FT_RRB_RATE_LIMIT	18
+ 
+ struct ft_rrb_tlv {
+ 	le16 type;
+@@ -368,6 +373,10 @@ struct wpa_auth_callbacks {
+ 			struct vlan_description *vlan);
+ 	int (*get_vlan)(void *ctx, const u8 *sta_addr,
+ 			struct vlan_description *vlan);
++	int (*set_rate_limit)(void *ctx, const u8 *sta_addr,
++			      struct rate_description *rate);
++	int (*get_rate_limit)(void *ctx, const u8 *sta_addr,
++			      struct rate_description *rate);
+ 	int (*set_identity)(void *ctx, const u8 *sta_addr,
+ 			    const u8 *identity, size_t identity_len);
+ 	size_t (*get_identity)(void *ctx, const u8 *sta_addr, const u8 **buf);
+@@ -536,7 +545,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
+ 			struct vlan_description *vlan,
+ 			const u8 **identity, size_t *identity_len,
+ 			const u8 **radius_cui, size_t *radius_cui_len,
+-			int *session_timeout);
++			int *session_timeout, struct rate_description *rate);
+ 
+ #endif /* CONFIG_IEEE80211R_AP */
+ 
+--- a/src/ap/wpa_auth_glue.c
++++ b/src/ap/wpa_auth_glue.c
+@@ -1200,6 +1200,40 @@ static int hostapd_wpa_auth_get_vlan(voi
+ }
+ 
+ 
++static int hostapd_wpa_auth_set_rate_limit(void *ctx, const u8 *sta_addr,
++					   struct rate_description *rate)
++{
++	struct hostapd_data *hapd = ctx;
++	struct sta_info *sta;
++
++	sta = ap_get_sta(hapd, sta_addr);
++	if (!sta || !sta->wpa_sm)
++		return -1;
++
++	memcpy(sta->bandwidth, rate, sizeof(*rate));
++	hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
++		       HOSTAPD_LEVEL_INFO, "rate-limit %d %d", sta->bandwidth[0], sta->bandwidth[1]);
++
++	return 0;
++}
++
++
++static int hostapd_wpa_auth_get_rate_limit(void *ctx, const u8 *sta_addr,
++					   struct rate_description *rate)
++{
++	struct hostapd_data *hapd = ctx;
++	struct sta_info *sta;
++
++	sta = ap_get_sta(hapd, sta_addr);
++	if (!sta)
++		return -1;
++
++	memcpy(rate, sta->bandwidth, sizeof(*rate));
++
++	return 0;
++}
++
++
+ static int
+ hostapd_wpa_auth_set_identity(void *ctx, const u8 *sta_addr,
+ 			      const u8 *identity, size_t identity_len)
+@@ -1640,6 +1674,8 @@ int hostapd_setup_wpa(struct hostapd_dat
+ 		.add_tspec = hostapd_wpa_auth_add_tspec,
+ 		.set_vlan = hostapd_wpa_auth_set_vlan,
+ 		.get_vlan = hostapd_wpa_auth_get_vlan,
++		.set_rate_limit = hostapd_wpa_auth_set_rate_limit,
++		.get_rate_limit = hostapd_wpa_auth_get_rate_limit,
+ 		.set_identity = hostapd_wpa_auth_set_identity,
+ 		.get_identity = hostapd_wpa_auth_get_identity,
+ 		.set_radius_cui = hostapd_wpa_auth_set_radius_cui,
+--- a/src/ap/wpa_auth_ft.c
++++ b/src/ap/wpa_auth_ft.c
+@@ -379,6 +379,14 @@ static size_t wpa_ft_vlan_len(const stru
+ 	return tlv_len;
+ }
+ 
++static size_t wpa_ft_rate_limit_len(const struct rate_description *rate)
++{
++	if (!rate || (!rate->rx && !rate->tx))
++		return 0;
++
++	return (sizeof(struct ft_rrb_tlv) + 8);
++}
++
+ 
+ static size_t wpa_ft_vlan_lin(const struct vlan_description *vlan,
+ 			      u8 *start, u8 *endpos)
+@@ -434,10 +442,48 @@ static size_t wpa_ft_vlan_lin(const stru
+ }
+ 
+ 
++static size_t wpa_ft_rate_limit_lin(const struct rate_description *rate,
++				    u8 *start, u8 *endpos)
++{
++	size_t tlv_len;
++	int i, len;
++	struct ft_rrb_tlv *hdr;
++	u8 *pos = start;
++
++	if (!rate)
++		return 0;
++
++	tlv_len = 0;
++	if (rate->rx || rate->tx) {
++		tlv_len += sizeof(*hdr);
++		if (start + tlv_len > endpos)
++			return tlv_len;
++		hdr = (struct ft_rrb_tlv *) pos;
++		hdr->type = host_to_le16(FT_RRB_RATE_LIMIT);
++		hdr->len = host_to_le16(2 * sizeof(le32));
++		pos = start + tlv_len;
++
++		tlv_len += sizeof(u32);
++		if (start + tlv_len > endpos)
++			return tlv_len;
++		WPA_PUT_LE32(pos, rate->rx);
++		pos = start + tlv_len;
++		tlv_len += sizeof(u32);
++		if (start + tlv_len > endpos)
++			return tlv_len;
++		WPA_PUT_LE32(pos, rate->tx);
++		pos = start + tlv_len;
++	}
++
++	return tlv_len;
++}
++
++
+ static int wpa_ft_rrb_lin(const struct tlv_list *tlvs1,
+ 			  const struct tlv_list *tlvs2,
+ 			  const struct vlan_description *vlan,
+-			  u8 **plain, size_t *plain_len)
++			  u8 **plain, size_t *plain_len,
++			  const struct rate_description *rate)
+ {
+ 	u8 *pos, *endpos;
+ 	size_t tlv_len;
+@@ -445,6 +491,7 @@ static int wpa_ft_rrb_lin(const struct t
+ 	tlv_len = wpa_ft_tlv_len(tlvs1);
+ 	tlv_len += wpa_ft_tlv_len(tlvs2);
+ 	tlv_len += wpa_ft_vlan_len(vlan);
++	tlv_len += wpa_ft_rate_limit_len(rate);
+ 
+ 	*plain_len = tlv_len;
+ 	*plain = os_zalloc(tlv_len);
+@@ -458,6 +505,7 @@ static int wpa_ft_rrb_lin(const struct t
+ 	pos += wpa_ft_tlv_lin(tlvs1, pos, endpos);
+ 	pos += wpa_ft_tlv_lin(tlvs2, pos, endpos);
+ 	pos += wpa_ft_vlan_lin(vlan, pos, endpos);
++	pos += wpa_ft_rate_limit_lin(rate, pos, endpos);
+ 
+ 	/* validity check */
+ 	if (pos != endpos) {
+@@ -526,7 +574,8 @@ static int wpa_ft_rrb_build(const u8 *ke
+ 			    const struct tlv_list *tlvs_auth,
+ 			    const struct vlan_description *vlan,
+ 			    const u8 *src_addr, u8 type,
+-			    u8 **packet, size_t *packet_len)
++			    u8 **packet, size_t *packet_len,
++			    const struct rate_description *rate)
+ {
+ 	u8 *plain = NULL, *auth = NULL, *pos, *tmp;
+ 	size_t plain_len = 0, auth_len = 0;
+@@ -534,10 +583,10 @@ static int wpa_ft_rrb_build(const u8 *ke
+ 	size_t pad_len = 0;
+ 
+ 	*packet = NULL;
+-	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len) < 0)
++	if (wpa_ft_rrb_lin(tlvs_enc0, tlvs_enc1, vlan, &plain, &plain_len, rate) < 0)
+ 		goto out;
+ 
+-	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len) < 0)
++	if (wpa_ft_rrb_lin(tlvs_auth, NULL, NULL, &auth, &auth_len, NULL) < 0)
+ 		goto out;
+ 
+ 	*packet_len = sizeof(u16) + auth_len + plain_len;
+@@ -700,6 +749,24 @@ static int wpa_ft_get_vlan(struct wpa_au
+ }
+ 
+ 
++static int wpa_ft_get_rate_limit(struct wpa_authenticator *wpa_auth,
++				 const u8 *sta_addr, struct rate_description *rate)
++{
++	if (!wpa_auth->cb->get_rate_limit)
++		return -1;
++	return wpa_auth->cb->get_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
++}
++
++
++static int wpa_ft_set_rate_limit(struct wpa_authenticator *wpa_auth,
++				 const u8 *sta_addr, struct rate_description *rate)
++{
++	if (!wpa_auth->cb->set_rate_limit)
++		return -1;
++	return wpa_auth->cb->set_rate_limit(wpa_auth->cb_ctx, sta_addr, rate);
++}
++
++
+ static int
+ wpa_ft_set_identity(struct wpa_authenticator *wpa_auth, const u8 *sta_addr,
+ 		    const u8 *identity, size_t identity_len)
+@@ -1025,7 +1092,7 @@ wpa_ft_rrb_seq_req(struct wpa_authentica
+ 
+ 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_req_auth, NULL,
+ 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_REQ,
+-			     &packet, &packet_len) < 0) {
++			     &packet, &packet_len, NULL) < 0) {
+ 		item = NULL; /* some other seq resp might still accept this */
+ 		goto err;
+ 	}
+@@ -1208,6 +1275,7 @@ struct wpa_ft_pmk_r0_sa {
+ 	u8 spa[ETH_ALEN];
+ 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
+ 	struct vlan_description *vlan;
++	struct rate_description *rate;
+ 	os_time_t expiration; /* 0 for no expiration */
+ 	u8 *identity;
+ 	size_t identity_len;
+@@ -1226,6 +1294,7 @@ struct wpa_ft_pmk_r1_sa {
+ 	u8 spa[ETH_ALEN];
+ 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
+ 	struct vlan_description *vlan;
++	struct rate_description *rate;
+ 	u8 *identity;
+ 	size_t identity_len;
+ 	u8 *radius_cui;
+@@ -1254,6 +1323,7 @@ static void wpa_ft_free_pmk_r0(struct wp
+ 
+ 	os_memset(r0->pmk_r0, 0, PMK_LEN_MAX);
+ 	os_free(r0->vlan);
++	os_free(r0->rate);
+ 	os_free(r0->identity);
+ 	os_free(r0->radius_cui);
+ 	os_free(r0);
+@@ -1307,6 +1377,7 @@ static void wpa_ft_free_pmk_r1(struct wp
+ 	eloop_cancel_timeout(wpa_ft_expire_pmk_r1, r1, NULL);
+ 
+ 	os_memset(r1->pmk_r1, 0, PMK_LEN_MAX);
++	os_free(r1->rate);
+ 	os_free(r1->vlan);
+ 	os_free(r1->identity);
+ 	os_free(r1->radius_cui);
+@@ -1360,7 +1431,8 @@ static int wpa_ft_store_pmk_r0(struct wp
+ 			       const struct vlan_description *vlan,
+ 			       int expires_in, int session_timeout,
+ 			       const u8 *identity, size_t identity_len,
+-			       const u8 *radius_cui, size_t radius_cui_len)
++			       const u8 *radius_cui, size_t radius_cui_len,
++			       struct rate_description *rate)
+ {
+ 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
+ 	struct wpa_ft_pmk_r0_sa *r0;
+@@ -1388,6 +1460,14 @@ static int wpa_ft_store_pmk_r0(struct wp
+ 		}
+ 		*r0->vlan = *vlan;
+ 	}
++	if (rate) {
++		r0->rate = os_zalloc(sizeof(*rate));
++		if (!r0->rate) {
++			bin_clear_free(r0, sizeof(*r0));
++			return -1;
++		}
++		*r0->rate = *rate;
++	}
+ 	if (identity) {
+ 		r0->identity = os_malloc(identity_len);
+ 		if (r0->identity) {
+@@ -1447,7 +1527,8 @@ static int wpa_ft_store_pmk_r1(struct wp
+ 			       const struct vlan_description *vlan,
+ 			       int expires_in, int session_timeout,
+ 			       const u8 *identity, size_t identity_len,
+-			       const u8 *radius_cui, size_t radius_cui_len)
++			       const u8 *radius_cui, size_t radius_cui_len,
++			       struct rate_description *rate)
+ {
+ 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
+ 	int max_expires_in = wpa_auth->conf.r1_max_key_lifetime;
+@@ -1477,6 +1558,14 @@ static int wpa_ft_store_pmk_r1(struct wp
+ 		}
+ 		*r1->vlan = *vlan;
+ 	}
++	if (rate) {
++		r1->rate = os_zalloc(sizeof(*rate));
++		if (!r1->rate) {
++			bin_clear_free(r1, sizeof(*r1));
++			return -1;
++		}
++		*r1->rate = *rate;
++	}
+ 	if (identity) {
+ 		r1->identity = os_malloc(identity_len);
+ 		if (r1->identity) {
+@@ -1513,7 +1602,7 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
+ 			struct vlan_description *vlan,
+ 			const u8 **identity, size_t *identity_len,
+ 			const u8 **radius_cui, size_t *radius_cui_len,
+-			int *session_timeout)
++			int *session_timeout, struct rate_description *rate)
+ {
+ 	struct wpa_ft_pmk_cache *cache = wpa_auth->ft_pmk_cache;
+ 	struct wpa_ft_pmk_r1_sa *r1;
+@@ -1533,6 +1622,12 @@ int wpa_ft_fetch_pmk_r1(struct wpa_authe
+ 				*vlan = *r1->vlan;
+ 			if (vlan && !r1->vlan)
+ 				os_memset(vlan, 0, sizeof(*vlan));
++			if (rate) {
++				if (r1->rate)
++					*rate = *r1->rate;
++				else
++					memset(rate, 0, sizeof(*rate));
++			}
+ 			if (identity && identity_len) {
+ 				*identity = r1->identity;
+ 				*identity_len = r1->identity_len;
+@@ -2059,7 +2154,7 @@ static int wpa_ft_pull_pmk_r1(struct wpa
+ 
+ 	if (wpa_ft_rrb_build(key, key_len, req_enc, NULL, req_auth, NULL,
+ 			     sm->wpa_auth->addr, FT_PACKET_R0KH_R1KH_PULL,
+-			     &packet, &packet_len) < 0)
++			     &packet, &packet_len, NULL) < 0)
+ 		return -1;
+ 
+ 	ft_pending_req_ies = wpabuf_alloc_copy(ies, ies_len);
+@@ -2088,6 +2183,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
+ {
+ 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
+ 	struct vlan_description vlan;
++	struct rate_description rate;
+ 	const u8 *identity, *radius_cui;
+ 	size_t identity_len, radius_cui_len;
+ 	int session_timeout;
+@@ -2099,6 +2195,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
+ 			   MAC2STR(sm->addr));
+ 		return -1;
+ 	}
++	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
+ 
+ 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
+ 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
+@@ -2108,7 +2205,7 @@ int wpa_ft_store_pmk_fils(struct wpa_sta
+ 	return wpa_ft_store_pmk_r0(sm->wpa_auth, sm->addr, pmk_r0, pmk_r0_len,
+ 				   pmk_r0_name, sm->pairwise, &vlan, expires_in,
+ 				   session_timeout, identity, identity_len,
+-				   radius_cui, radius_cui_len);
++				   radius_cui, radius_cui_len, &rate);
+ }
+ 
+ 
+@@ -2172,6 +2269,7 @@ void wpa_auth_ft_store_keys(struct wpa_s
+ 	int psk_local = sm->wpa_auth->conf.ft_psk_generate_local;
+ 	int expires_in = sm->wpa_auth->conf.r0_key_lifetime;
+ 	struct vlan_description vlan;
++	struct rate_description rate;
+ 	const u8 *identity, *radius_cui;
+ 	size_t identity_len, radius_cui_len;
+ 	int session_timeout;
+@@ -2185,6 +2283,8 @@ void wpa_auth_ft_store_keys(struct wpa_s
+ 		return;
+ 	}
+ 
++	wpa_ft_get_rate_limit(sm->wpa_auth, sm->addr, &rate);
++
+ 	identity_len = wpa_ft_get_identity(sm->wpa_auth, sm->addr, &identity);
+ 	radius_cui_len = wpa_ft_get_radius_cui(sm->wpa_auth, sm->addr,
+ 					       &radius_cui);
+@@ -2195,11 +2295,12 @@ void wpa_auth_ft_store_keys(struct wpa_s
+ 			    pmk_r0_name,
+ 			    sm->pairwise, &vlan, expires_in,
+ 			    session_timeout, identity, identity_len,
+-			    radius_cui, radius_cui_len);
++			    radius_cui, radius_cui_len, &rate);
+ 	wpa_ft_store_pmk_r1(sm->wpa_auth, sm->addr, pmk_r1, key_len,
+ 			    sm->pmk_r1_name, sm->pairwise, &vlan,
+ 			    expires_in, session_timeout, identity,
+-			    identity_len, radius_cui, radius_cui_len);
++			    identity_len, radius_cui, radius_cui_len,
++			    &rate);
+ }
+ 
+ 
+@@ -3100,7 +3201,8 @@ static int wpa_ft_local_derive_pmk_r1(st
+ 				      const u8 **radius_cui,
+ 				      size_t *radius_cui_len,
+ 				      int *out_session_timeout,
+-				      size_t *pmk_r1_len)
++				      size_t *pmk_r1_len,
++				      struct rate_description *rate)
+ {
+ 	struct wpa_auth_config *conf = &wpa_auth->conf;
+ 	const struct wpa_ft_pmk_r0_sa *r0;
+@@ -3136,7 +3238,8 @@ static int wpa_ft_local_derive_pmk_r1(st
+ 			    out_pmk_r1_name,
+ 			    sm->pairwise, r0->vlan, expires_in, session_timeout,
+ 			    r0->identity, r0->identity_len,
+-			    r0->radius_cui, r0->radius_cui_len);
++			    r0->radius_cui, r0->radius_cui_len,
++			    r0->rate);
+ 
+ 	*out_pairwise = sm->pairwise;
+ 	if (vlan) {
+@@ -3146,6 +3249,13 @@ static int wpa_ft_local_derive_pmk_r1(st
+ 			os_memset(vlan, 0, sizeof(*vlan));
+ 	}
+ 
++	if (rate) {
++		if (r0->rate)
++			*rate = *r0->rate;
++		else
++			os_memset(rate, 0, sizeof(*rate));
++	}
++
+ 	if (identity && identity_len) {
+ 		*identity = r0->identity;
+ 		*identity_len = r0->identity_len;
+@@ -3178,6 +3288,7 @@ static int wpa_ft_process_auth_req(struc
+ 	u8 *pos, *end;
+ 	int pairwise, session_timeout = 0;
+ 	struct vlan_description vlan;
++	struct rate_description rate = {};
+ 	const u8 *identity, *radius_cui;
+ 	size_t identity_len = 0, radius_cui_len = 0;
+ 	size_t pmk_r1_len, kdk_len, len;
+@@ -3274,7 +3385,7 @@ static int wpa_ft_process_auth_req(struc
+ 					pmk_r1, &pmk_r1_len, &pairwise, &vlan,
+ 					&identity, &identity_len, &radius_cui,
+ 					&radius_cui_len,
+-					&session_timeout) == 0) {
++					&session_timeout, &rate) == 0) {
+ 			wpa_printf(MSG_DEBUG,
+ 				   "FT: Found PMKR1Name (using SHA%zu) from local cache",
+ 				   pmk_r1_len * 8);
+@@ -3290,7 +3401,7 @@ static int wpa_ft_process_auth_req(struc
+ 				       pmk_r1_name, pmk_r1, &pairwise,
+ 				       &vlan, &identity, &identity_len,
+ 				       &radius_cui, &radius_cui_len,
+-				       &session_timeout, &pmk_r1_len) == 0) {
++				       &session_timeout, &pmk_r1_len, &rate) == 0) {
+ 		wpa_printf(MSG_DEBUG,
+ 			   "FT: Generated PMK-R1 based on local PMK-R0");
+ 		goto pmk_r1_derived;
+@@ -3392,6 +3503,7 @@ pmk_r1_derived:
+ 		wpa_printf(MSG_DEBUG, "FT: Failed to configure VLAN");
+ 		goto out;
+ 	}
++	wpa_ft_set_rate_limit(sm->wpa_auth, sm->addr, &rate);
+ 	if (wpa_ft_set_identity(sm->wpa_auth, sm->addr,
+ 				identity, identity_len) < 0 ||
+ 	    wpa_ft_set_radius_cui(sm->wpa_auth, sm->addr,
+@@ -3973,7 +4085,7 @@ static int wpa_ft_rrb_build_r0(const u8
+ 
+ 	ret = wpa_ft_rrb_build(key, key_len, tlvs, sess_tlv, tlv_auth,
+ 			       pmk_r0->vlan, src_addr, type,
+-			       packet, packet_len);
++			       packet, packet_len, pmk_r0->rate);
+ 
+ 	forced_memzero(pmk_r1, sizeof(pmk_r1));
+ 
+@@ -4113,7 +4225,7 @@ static int wpa_ft_rrb_rx_pull(struct wpa
+ 		ret = wpa_ft_rrb_build(key, key_len, resp, NULL, resp_auth,
+ 				       NULL, wpa_auth->addr,
+ 				       FT_PACKET_R0KH_R1KH_RESP,
+-				       &packet, &packet_len);
++				       &packet, &packet_len, NULL);
+ 	} else {
+ 		ret = wpa_ft_rrb_build_r0(key, key_len, resp, r0, f_r1kh_id,
+ 					  f_s1kh_id, resp_auth, wpa_auth->addr,
+@@ -4165,11 +4277,15 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
+ 	size_t f_expires_in_len;
+ 	size_t f_identity_len, f_radius_cui_len;
+ 	size_t f_session_timeout_len;
++	size_t f_rate_len;
++	const u8 *f_rate;
+ 	int pairwise;
+ 	int ret = -1;
+ 	int expires_in;
+ 	int session_timeout;
+ 	struct vlan_description vlan;
++	struct rate_description rate;
++	int has_rate = 0;
+ 	size_t pmk_r1_len;
+ 
+ 	RRB_GET_AUTH(FT_RRB_R0KH_ID, r0kh_id, msgtype, -1);
+@@ -4279,6 +4395,13 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
+ 	wpa_printf(MSG_DEBUG, "FT: vlan %d%s",
+ 		   le_to_host16(vlan.untagged), vlan.tagged[0] ? "+" : "");
+ 
++	RRB_GET_OPTIONAL(FT_RRB_RATE_LIMIT, rate, msgtype, 2 * sizeof(le32));
++	if (f_rate) {
++		memcpy(&rate, f_rate, sizeof(rate));
++		rate.rx = le_to_host32(rate.rx);
++		rate.tx = le_to_host32(rate.tx);
++		has_rate = 1;
++	};
+ 	RRB_GET_OPTIONAL(FT_RRB_IDENTITY, identity, msgtype, -1);
+ 	if (f_identity)
+ 		wpa_hexdump_ascii(MSG_DEBUG, "FT: Identity", f_identity,
+@@ -4301,7 +4424,7 @@ static int wpa_ft_rrb_rx_r1(struct wpa_a
+ 				f_pmk_r1_name,
+ 				pairwise, &vlan, expires_in, session_timeout,
+ 				f_identity, f_identity_len, f_radius_cui,
+-				f_radius_cui_len) < 0)
++				f_radius_cui_len, has_rate ? &rate : 0) < 0)
+ 		goto out;
+ 
+ 	ret = 0;
+@@ -4614,7 +4737,7 @@ static int wpa_ft_rrb_rx_seq_req(struct
+ 
+ 	if (wpa_ft_rrb_build(key, key_len, NULL, NULL, seq_resp_auth, NULL,
+ 			     wpa_auth->addr, FT_PACKET_R0KH_R1KH_SEQ_RESP,
+-			     &packet, &packet_len) < 0)
++			     &packet, &packet_len, NULL) < 0)
+ 		goto out;
+ 
+ 	wpa_ft_rrb_oui_send(wpa_auth, src_addr,

feeds/hostapd/hostapd/patches/761-shared_das_port.patch

@@ -0,0 +1,298 @@
+--- a/src/radius/radius_das.h
++++ b/src/radius/radius_das.h
+@@ -44,6 +44,7 @@ struct radius_das_attrs {
+ struct radius_das_conf {
+ 	int port;
+ 	const u8 *shared_secret;
++	const u8 *nas_identifier;
+ 	size_t shared_secret_len;
+ 	const struct hostapd_ip_addr *client_addr;
+ 	unsigned int time_window;
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -1423,6 +1423,7 @@ int hostapd_setup_bss(struct hostapd_dat
+ 
+ 			os_memset(&das_conf, 0, sizeof(das_conf));
+ 			das_conf.port = conf->radius_das_port;
++			das_conf.nas_identifier = conf->nas_identifier;
+ 			das_conf.shared_secret = conf->radius_das_shared_secret;
+ 			das_conf.shared_secret_len =
+ 				conf->radius_das_shared_secret_len;
+--- a/src/radius/radius_das.c
++++ b/src/radius/radius_das.c
+@@ -12,13 +12,26 @@
+ #include "utils/common.h"
+ #include "utils/eloop.h"
+ #include "utils/ip_addr.h"
++#include "utils/list.h"
+ #include "radius.h"
+ #include "radius_das.h"
+ 
+ 
+-struct radius_das_data {
++static struct dl_list das_ports = DL_LIST_HEAD_INIT(das_ports);
++
++struct radius_das_port {
++	struct dl_list list;
++	struct dl_list das_data;
++
++	int port;
+ 	int sock;
++};
++
++struct radius_das_data {
++	struct dl_list list;
++	struct radius_das_port *port;
+ 	u8 *shared_secret;
++	u8 *nas_identifier;
+ 	size_t shared_secret_len;
+ 	struct hostapd_ip_addr client_addr;
+ 	unsigned int time_window;
+@@ -378,56 +391,17 @@ fail:
+ }
+ 
+ 
+-static void radius_das_receive(int sock, void *eloop_ctx, void *sock_ctx)
++static void
++radius_das_receive_msg(struct radius_das_data *das, struct radius_msg *msg,
++		       struct sockaddr *from, socklen_t fromlen,
++		       char *abuf, int from_port)
+ {
+-	struct radius_das_data *das = eloop_ctx;
+-	u8 buf[1500];
+-	union {
+-		struct sockaddr_storage ss;
+-		struct sockaddr_in sin;
+-#ifdef CONFIG_IPV6
+-		struct sockaddr_in6 sin6;
+-#endif /* CONFIG_IPV6 */
+-	} from;
+-	char abuf[50];
+-	int from_port = 0;
+-	socklen_t fromlen;
+-	int len;
+-	struct radius_msg *msg, *reply = NULL;
++	struct radius_msg *reply = NULL;
+ 	struct radius_hdr *hdr;
+ 	struct wpabuf *rbuf;
++	struct os_time now;
+ 	u32 val;
+ 	int res;
+-	struct os_time now;
+-
+-	fromlen = sizeof(from);
+-	len = recvfrom(sock, buf, sizeof(buf), 0,
+-		       (struct sockaddr *) &from.ss, &fromlen);
+-	if (len < 0) {
+-		wpa_printf(MSG_ERROR, "DAS: recvfrom: %s", strerror(errno));
+-		return;
+-	}
+-
+-	os_strlcpy(abuf, inet_ntoa(from.sin.sin_addr), sizeof(abuf));
+-	from_port = ntohs(from.sin.sin_port);
+-
+-	wpa_printf(MSG_DEBUG, "DAS: Received %d bytes from %s:%d",
+-		   len, abuf, from_port);
+-	if (das->client_addr.u.v4.s_addr &&
+-	    das->client_addr.u.v4.s_addr != from.sin.sin_addr.s_addr) {
+-		wpa_printf(MSG_DEBUG, "DAS: Drop message from unknown client");
+-		return;
+-	}
+-
+-	msg = radius_msg_parse(buf, len);
+-	if (msg == NULL) {
+-		wpa_printf(MSG_DEBUG, "DAS: Parsing incoming RADIUS packet "
+-			   "from %s:%d failed", abuf, from_port);
+-		return;
+-	}
+-
+-	if (wpa_debug_level <= MSG_MSGDUMP)
+-		radius_msg_dump(msg);
+ 
+ 	if (radius_msg_verify_das_req(msg, das->shared_secret,
+ 				       das->shared_secret_len,
+@@ -494,9 +468,8 @@ static void radius_das_receive(int sock,
+ 			radius_msg_dump(reply);
+ 
+ 		rbuf = radius_msg_get_buf(reply);
+-		res = sendto(das->sock, wpabuf_head(rbuf),
+-			     wpabuf_len(rbuf), 0,
+-			     (struct sockaddr *) &from.ss, fromlen);
++		res = sendto(das->port->sock, wpabuf_head(rbuf),
++			     wpabuf_len(rbuf), 0, from, fromlen);
+ 		if (res < 0) {
+ 			wpa_printf(MSG_ERROR, "DAS: sendto(to %s:%d): %s",
+ 				   abuf, from_port, strerror(errno));
+@@ -508,6 +481,72 @@ fail:
+ 	radius_msg_free(reply);
+ }
+ 
++static void radius_das_receive(int sock, void *eloop_ctx, void *sock_ctx)
++{
++	struct radius_das_port *p = eloop_ctx;
++	struct radius_das_data *das;
++	u8 buf[1500];
++	union {
++		struct sockaddr_storage ss;
++		struct sockaddr_in sin;
++#ifdef CONFIG_IPV6
++		struct sockaddr_in6 sin6;
++#endif /* CONFIG_IPV6 */
++	} from;
++	struct radius_msg *msg;
++	size_t nasid_len = 0;
++	u8 *nasid_buf = NULL;
++	char abuf[50];
++	int from_port = 0;
++	socklen_t fromlen;
++	int found = 0;
++	int len;
++
++	fromlen = sizeof(from);
++	len = recvfrom(sock, buf, sizeof(buf), 0,
++		       (struct sockaddr *) &from.ss, &fromlen);
++	if (len < 0) {
++		wpa_printf(MSG_ERROR, "DAS: recvfrom: %s", strerror(errno));
++		return;
++	}
++
++	os_strlcpy(abuf, inet_ntoa(from.sin.sin_addr), sizeof(abuf));
++	from_port = ntohs(from.sin.sin_port);
++
++	msg = radius_msg_parse(buf, len);
++	if (msg == NULL) {
++		wpa_printf(MSG_DEBUG, "DAS: Parsing incoming RADIUS packet "
++			   "from %s:%d failed", abuf, from_port);
++		return;
++	}
++
++	wpa_printf(MSG_DEBUG, "DAS: Received %d bytes from %s:%d",
++		   len, abuf, from_port);
++
++	if (wpa_debug_level <= MSG_MSGDUMP)
++		radius_msg_dump(msg);
++
++	radius_msg_get_attr_ptr(msg, RADIUS_ATTR_NAS_IDENTIFIER,
++				&nasid_buf, &nasid_len, NULL);
++	dl_list_for_each(das, &p->das_data, struct radius_das_data, list) {
++		if (das->client_addr.u.v4.s_addr &&
++		    das->client_addr.u.v4.s_addr != from.sin.sin_addr.s_addr)
++			continue;
++
++		if (das->nas_identifier && nasid_buf &&
++		    (nasid_len != os_strlen(das->nas_identifier) ||
++		     os_memcmp(das->nas_identifier, nasid_buf, nasid_len) != 0))
++			continue;
++
++		found = 1;
++		radius_das_receive_msg(das, msg, (struct sockaddr *)&from.ss,
++				       fromlen, abuf, from_port);
++	}
++
++	if (!found)
++		wpa_printf(MSG_DEBUG, "DAS: Drop message from unknown client");
++}
++
+ 
+ static int radius_das_open_socket(int port)
+ {
+@@ -533,6 +572,49 @@ static int radius_das_open_socket(int po
+ }
+ 
+ 
++static struct radius_das_port *
++radius_das_open_port(int port)
++{
++	struct radius_das_port *p;
++
++	dl_list_for_each(p, &das_ports, struct radius_das_port, list) {
++		if (p->port == port)
++			return p;
++	}
++
++	p = os_zalloc(sizeof(*p));
++	if (p == NULL)
++		return NULL;
++
++	dl_list_init(&p->das_data);
++	p->port = port;
++	p->sock = radius_das_open_socket(port);
++	if (p->sock < 0)
++		goto free_port;
++
++	if (eloop_register_read_sock(p->sock, radius_das_receive, p, NULL))
++		goto close_port;
++
++	dl_list_add(&das_ports, &p->list);
++
++	return p;
++
++close_port:
++	close(p->sock);
++free_port:
++	os_free(p);
++
++	return NULL;
++}
++
++static void radius_das_close_port(struct radius_das_port *p)
++{
++	dl_list_del(&p->list);
++	eloop_unregister_read_sock(p->sock);
++	close(p->sock);
++	free(p);
++}
++
+ struct radius_das_data *
+ radius_das_init(struct radius_das_conf *conf)
+ {
+@@ -553,6 +635,8 @@ radius_das_init(struct radius_das_conf *
+ 	das->ctx = conf->ctx;
+ 	das->disconnect = conf->disconnect;
+ 	das->coa = conf->coa;
++	if (conf->nas_identifier)
++		das->nas_identifier = os_strdup(conf->nas_identifier);
+ 
+ 	os_memcpy(&das->client_addr, conf->client_addr,
+ 		  sizeof(das->client_addr));
+@@ -565,19 +649,15 @@ radius_das_init(struct radius_das_conf *
+ 	}
+ 	das->shared_secret_len = conf->shared_secret_len;
+ 
+-	das->sock = radius_das_open_socket(conf->port);
+-	if (das->sock < 0) {
++	das->port = radius_das_open_port(conf->port);
++	if (!das->port) {
+ 		wpa_printf(MSG_ERROR, "Failed to open UDP socket for RADIUS "
+ 			   "DAS");
+ 		radius_das_deinit(das);
+ 		return NULL;
+ 	}
+ 
+-	if (eloop_register_read_sock(das->sock, radius_das_receive, das, NULL))
+-	{
+-		radius_das_deinit(das);
+-		return NULL;
+-	}
++	dl_list_add(&das->port->das_data, &das->list);
+ 
+ 	return das;
+ }
+@@ -588,11 +668,14 @@ void radius_das_deinit(struct radius_das
+ 	if (das == NULL)
+ 		return;
+ 
+-	if (das->sock >= 0) {
+-		eloop_unregister_read_sock(das->sock);
+-		close(das->sock);
++	if (das->port) {
++		dl_list_del(&das->list);
++
++		if (dl_list_empty(&das->port->das_data))
++			radius_das_close_port(das->port);
+ 	}
+ 
++	os_free(das->nas_identifier);
+ 	os_free(das->shared_secret);
+ 	os_free(das);
+ }

feeds/hostapd/hostapd/patches/800-fix-ap-sta-channel-setup-failed.patch

@@ -1,6 +1,8 @@
+diff --git a/src/common/hw_features_common.c b/src/common/hw_features_common.c
+index ad2aebf..355b4a8 100644
 --- a/src/common/hw_features_common.c
 +++ b/src/common/hw_features_common.c
-@@ -609,9 +609,21 @@ int hostapd_set_freq_params(struct hosta
+@@ -615,9 +615,21 @@ int hostapd_set_freq_params(struct hostapd_freq_params *data,
  			    center_segment0 == channel - 6)
  				data->center_freq1 = 5000 + center_segment0 * 5;
  			else {

feeds/hostapd/hostapd/patches/901-cfg-section.patch

@@ -0,0 +1,37 @@
+Index: hostapd-2023-09-08-e5ccbfc6/hostapd/config_file.c
+===================================================================
+--- hostapd-2023-09-08-e5ccbfc6.orig/hostapd/config_file.c
++++ hostapd-2023-09-08-e5ccbfc6/hostapd/config_file.c
+@@ -2345,6 +2345,8 @@ static int hostapd_config_fill(struct ho
+ 			return 1;
+ 		}
+ 		conf->driver = driver;
++	} else if (os_strcmp(buf, "uci_section") == 0) {
++		bss->uci_section = os_strdup(pos);
+ 	} else if (os_strcmp(buf, "driver_params") == 0) {
+ 		os_free(conf->driver_params);
+ 		conf->driver_params = os_strdup(pos);
+Index: hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.h
+===================================================================
+--- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/ap_config.h
++++ hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.h
+@@ -287,6 +287,7 @@ struct hostapd_bss_config {
+ 	char snoop_iface[IFNAMSIZ + 1];
+ 	char vlan_bridge[IFNAMSIZ + 1];
+ 	char wds_bridge[IFNAMSIZ + 1];
++	char *uci_section;
+ 	int bridge_hairpin; /* hairpin_mode on bridge members */
+ 
+ 	enum hostapd_logger_level logger_syslog_level, logger_stdout_level;
+Index: hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.c
+===================================================================
+--- hostapd-2023-09-08-e5ccbfc6.orig/src/ap/ap_config.c
++++ hostapd-2023-09-08-e5ccbfc6/src/ap/ap_config.c
+@@ -798,6 +798,7 @@ void hostapd_config_free_bss(struct host
+ 	os_free(conf->radius_req_attr_sqlite);
+ 	os_free(conf->rsn_preauth_interfaces);
+ 	os_free(conf->ctrl_interface);
++	os_free(conf->uci_section);
+ 	os_free(conf->config_id);
+ 	os_free(conf->ca_cert);
+ 	os_free(conf->server_cert);

feeds/hostapd/hostapd/patches/991-Fix-OpenWrt-13156.patch

@@ -0,0 +1,63 @@
+From 26cd9bafc1d25e602952ee86cd2a5b8c3a995490 Mon Sep 17 00:00:00 2001
+From: Stijn Tintel <stijn@linux-ipv6.be>
+Date: Fri, 28 Jul 2023 16:27:47 +0300
+Subject: [PATCH] Revert "Do prune_association only after the STA is
+ authorized"
+
+Commit e978072baaca ("Do prune_association only after the STA is
+authorized") causes issues when an STA roams from one interface to
+another interface on the same PHY. The mt7915 driver is not able to
+handle this properly. While the commits fixes a DoS, there are other
+devices and drivers with the same limitation, so revert to the orginal
+behavior for now, until we have a better solution in place.
+
+Ref: https://github.com/openwrt/openwrt/issues/13156
+Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
+---
+ src/ap/hostapd.c  | 14 +++++++++++---
+ src/ap/sta_info.c |  3 ---
+ 2 files changed, 11 insertions(+), 6 deletions(-)
+
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -3564,6 +3564,8 @@ int hostapd_remove_iface(struct hapd_int
+ void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta,
+ 			   int reassoc)
+ {
++	int mld_assoc_link_id = -1;
++
+ 	if (hapd->tkip_countermeasures) {
+ 		hostapd_drv_sta_deauth(hapd, sta->addr,
+ 				       WLAN_REASON_MICHAEL_MIC_FAILURE);
+@@ -3571,10 +3573,16 @@ void hostapd_new_assoc_sta(struct hostap
+ 	}
+ 
+ #ifdef CONFIG_IEEE80211BE
+-	if (hapd->conf->mld_ap && sta->mld_info.mld_sta &&
+-	    sta->mld_assoc_link_id != hapd->mld_link_id)
+-		return;
++	if (hapd->conf->mld_ap && sta->mld_info.mld_sta) {
++		if (sta->mld_assoc_link_id == hapd->mld_link_id) {
++			mld_assoc_link_id = sta->mld_assoc_link_id;
++		} else {
++			return;
++		}
++	}
+ #endif /* CONFIG_IEEE80211BE */
++        if (mld_assoc_link_id != -2)
++		hostapd_prune_associations(hapd, sta->addr, mld_assoc_link_id);
+ 
+ 	ap_sta_clear_disconnect_timeouts(hapd, sta);
+ 	sta->post_csa_sa_query = 0;
+--- a/src/ap/sta_info.c
++++ b/src/ap/sta_info.c
+@@ -1318,9 +1318,6 @@ void ap_sta_set_authorized(struct hostap
+ 				mld_assoc_link_id = -2;
+ 		}
+ #endif /* CONFIG_IEEE80211BE */
+-		if (mld_assoc_link_id != -2)
+-			hostapd_prune_associations(hapd, sta->addr,
+-						   mld_assoc_link_id);
+ 		sta->flags |= WLAN_STA_AUTHORIZED;
+ 	} else {
+ 		sta->flags &= ~WLAN_STA_AUTHORIZED;