scottk/OpenCellular
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/OpenCellular.git synced 2025-12-28 02:35:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
35d534dfb37185118a735afccec5dc78d93fbc33
OpenCellular/include
History
Dino Li f817140c3e chip: it83xx: Optimize interrupt usage of LPC access 
LPC access interrupt only enabled when EC entering deep doze mode. This
will reduce interrupt of LPC access. Also, this interrupt is always
enabled for LPC platform to support "CONFIG_LOW_POWER_S0".

Signed-off-by: Dino Li <dino.li@ite.com.tw>

BRANCH=none
BUG=none
TEST=Tested ectool command 'version' x 10000.

Change-Id: I9053c4018b38a8a852c3c6254e1fcde625f3fa3a
Reviewed-on: https://chromium-review.googlesource.com/336112
Commit-Ready: Dino Li <dino0303@gmail.com>
Tested-by: Dino Li <dino0303@gmail.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
2016-05-18 19:44:09 -07:00
..
accelgyro.h
motion: fix manage_activity interface
2015-10-16 14:46:20 -07:00
acpi.h
…
adc.h
stm32: adc: Add support for DMA continuous mode
2015-12-21 14:58:56 -08:00
als.h
ALS: Disable the ALS task if all the ALS inits fail
2015-10-02 12:55:51 -07:00
ap_hang_detect.h
…
backlight.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
battery_bq27621_g1.h
battery: Add support for TI's BQ27621_g1 fuel gauge.
2014-12-31 00:01:00 +00:00
battery_smart.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
battery.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
board_config.h
…
button.h
…
byteorder.h
Move include/byteorder.h -> builtin/endian.h
2016-04-22 20:40:03 -07:00
capsense.h
…
case_closed_debug.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
charge_manager.h
charge_manager: Report UNKNOWN USB charger for 2 seconds after change
2016-04-03 10:27:36 -07:00
charge_ramp.h
charge_manager: Report UNKNOWN USB charger for 2 seconds after change
2016-04-03 10:27:36 -07:00
charge_state_v1.h
…
charge_state_v2.h
i2c: get battery information from charge state
2015-10-27 11:52:34 -07:00
charge_state.h
charger: Change unlocked battery level ignore conditions
2016-01-06 18:48:11 -08:00
charger_detect.h
lucid: add support to detect BC1.2 suppliers
2016-02-26 21:22:07 -08:00
charger.h
charger: Change unlocked battery level ignore conditions
2016-01-06 18:48:11 -08:00
chipset.h
apollolake: ignore PLTRST# from SOC unless RSMRST# is deasserted
2016-05-03 15:40:46 -07:00
clock.h
stm32: Add delay after enabling peripheral clock
2015-02-10 10:47:07 +00:00
common.h
common.h: Create __bss_slow tag.
2015-11-08 07:59:40 -08:00
compile_time_macros.h
NPCX: Refactor GPIO driver for functionality and size
2016-03-02 11:22:51 -08:00
config_std_internal_flash.h
cleanup: Remove CONFIG_FW_IMAGE_SIZE
2015-09-24 18:07:01 -07:00
config.h
chip: it83xx: Optimize interrupt usage of LPC access
2016-05-18 19:44:09 -07:00
console_channel.inc
cr50: add basic rbox support
2016-04-29 16:07:13 -07:00
console.h
do not allow console commands with names longer than 14 characters
2016-05-18 01:27:45 -07:00
consumer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
crc8.h
crc8: Support crc calculation across non-contiguous data
2016-03-18 22:16:53 -07:00
crc.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
dma.h
common: Change interface to dma_test
2015-07-27 22:19:16 +00:00
dptf.h
…
ec_commands.h
pwm: Add generic PWM control host commands
2016-05-11 18:24:30 -07:00
eeprom.h
…
extension.h
CR50: add support for P256-ECIES (hybrid encryption)
2016-04-19 22:47:36 -07:00
extpower.h
Remove obsolete board-specific code
2015-06-10 18:24:05 +00:00
fan.h
Samus: Handle fan startup in the EC, not the fan controller
2014-11-06 02:28:22 +00:00
flash.h
cleanup: Remove superfluous #defines
2015-09-25 18:05:27 -07:00
gesture.h
common: motion: move gesture actions in motion task.
2015-09-18 17:55:32 -07:00
gpio_list.h
Add header files needed by gpio_list.h
2016-04-12 15:22:29 -07:00
gpio_signal.h
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
gpio.h
servo_micro: add gpio mode get and set
2016-04-27 14:04:07 -07:00
gpio.wrap
mec1322: Simplify GPIO lists
2015-05-27 03:58:16 +00:00
hooks.h
hooks: Add relative HOOK_INIT priority for peripherals
2016-05-05 01:12:25 -07:00
host_command.h
common: Include host/console commands based on HAS_TASK_HOSTCMD/CONSOLE
2015-12-18 12:43:50 -08:00
hwtimer.h
…
i2c.h
stm32f0: i2c: Set timing register values by port clock source
2015-10-30 14:33:29 -07:00
i8042_protocol.h
…
inductive_charging.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
jtag.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
keyboard_8042_sharedlib.h
libsharedobjs: Add 8042 scancodes to shared lib.
2015-07-17 03:18:03 +00:00
keyboard_8042.h
…
keyboard_config.h
samus: change charge override hot keys to ctrl+search+0|1|2
2015-01-24 06:42:02 +00:00
keyboard_mkbp.h
…
keyboard_protocol.h
…
keyboard_raw.h
ectool: Support keyboard factory scanning
2016-04-01 00:21:35 -07:00
keyboard_scan.h
…
keyboard_test.h
…
lb_common.h
common: lightbar: put multiple commands under i2c_lock
2015-09-19 12:27:21 -07:00
led_common.h
lucid: add LED support
2015-12-22 21:07:25 -08:00
libsharedobjs.h
libsharedobjs: Add libsharedobjs.h.
2015-07-17 03:17:57 +00:00
lid_angle.h
Cyan: Added Clamshell/Tablet mode support
2015-08-10 20:42:18 +00:00
lid_switch.h
…
lightbar_msg_list.h
Remove PULSE and TEST sequences from lightbar module
2014-10-08 02:50:54 +00:00
lightbar_opcode_list.h
lightbar: interpreter additions to encode other patterns
2014-10-15 18:22:37 +00:00
lightbar.h
common: lightbar: Add histeresis to prevent flickering
2015-10-23 18:03:12 -07:00
link_defs.h
Deferred: Remove hard coded number of deferreds
2016-04-19 12:23:52 -07:00
lpc.h
skylake: set and clear wake masks in S0 <-> S0ix transitions
2016-02-10 12:44:15 -08:00
mag_cal.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat33.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
mat44.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
math_util.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
memory_commands.h
…
mkbp_event.h
MKBP event signalling implementation
2014-10-24 01:37:58 +00:00
module_id.h
cr50: add basic rbox support
2016-04-29 16:07:13 -07:00
motion_lid.h
ectool: provide lid angle info
2015-11-25 18:15:38 -08:00
motion_sense.h
sensor: update sensor driver to use I2C port from motion_sensor_t
2016-03-31 21:35:56 -07:00
onewire.h
…
panic.h
nds32: fix panic
2015-10-07 17:51:36 -07:00
peci.h
…
pmu_tpschrome.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
port80.h
mec1322: Change the Port 80 task to a timer IRQ.
2015-10-19 18:21:22 -07:00
power_button.h
cleanup: Fix signed vs unsigned typing
2016-02-03 21:34:47 -08:00
power_led.h
…
power.h
kunimitsu: hibernate: enable PseudoG3 support at board level
2016-02-18 17:35:16 -08:00
printf.h
…
producer.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
pwm.h
pwm: Add PWM_CONFIG_DSLEEP config flag
2016-04-27 23:58:04 -07:00
queue_policies.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
queue.h
Queue: Add ability to modify contiguous units inplace
2015-07-15 21:57:36 +00:00
rsa.h
cleanup: Handle signed RW images a bit cleaner
2015-09-25 19:36:37 -07:00
sfdp.h
common: Fixes the SFDP_BITFIELD() macro.
2016-01-29 02:59:58 +00:00
sha1.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
sha256.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
shared_mem.h
…
smbus.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
software_panic.h
samus: panic reboot EC if PD MCU crashes
2015-02-18 04:53:59 +00:00
spi_flash_reg.h
Celes: Add define to support GD25Q41B for External EC ROM.
2015-09-15 19:17:53 -07:00
spi_flash.h
spi_flash: Add protect support for W25X40
2015-03-11 23:18:09 +00:00
spi_nor.h
common: Adds a JEDEC SFDP v1.* based Serial NOR Flash driver
2016-01-28 21:45:37 +00:00
spi.h
cr50: adds the SPI master driver
2015-12-21 14:58:54 -08:00
stack_trace.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
switch.h
gpio: Refactor IRQ handler pointer out of gpio_list
2015-04-10 22:08:25 +00:00
system.h
Support RW_B in sysjump command when applicable
2016-04-08 12:34:29 -07:00
task_id.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
task.h
Don't declare functions inline that aren't always defined as such
2016-02-02 17:20:04 -08:00
temp_sensor_chip.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
temp_sensor.h
…
test_util.h
host: mock i2c_xfer
2015-09-16 14:49:46 -07:00
thermal.h
Show the fan-cooling percentage for each active temp sensor
2015-01-14 03:15:41 +00:00
throttle_ap.h
…
timer.h
Enforce compilation without system headers
2016-02-03 15:00:50 -08:00
tpm_registers.h
add command multiplexer to the TPM driver
2015-11-18 00:14:03 -08:00
trng.h
Enforce compilation without system headers
2016-02-03 15:00:50 -08:00
uart.h
UART: Remove enable/disable interrupt functions
2016-04-27 10:10:02 -07:00
usb_api.h
cr50: Detect debug cable and switch the PHY
2016-04-13 20:10:38 -07:00
usb_bb.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_charge.h
usb_charge: fix custom event mask
2015-09-11 13:51:07 -07:00
usb_console.h
update case closed debugging partial mode policy
2015-09-08 13:49:09 -07:00
usb_descriptor.h
Cr50: Update the USB VID:PID:subclass constants
2016-04-15 15:09:08 -07:00
usb_hid.h
cleanup: fix all the header guards
2015-06-18 19:07:00 +00:00
usb_mux.h
tcpc: add support for TCPC with integrated high-speed muxes
2016-01-27 14:52:18 -08:00
usb_pd_tcpc.h
tcpm: Add configuration struct for tcpc i2c params
2015-11-08 17:31:12 -08:00
usb_pd_tcpm.h
tcpm: update code to support multiple tcpm driver
2016-04-17 12:23:07 -07:00
usb_pd.h
Deferred: Use deferred_data instead of function pointer
2016-04-18 17:32:40 -07:00
util.h
CR50: move utility method reverse() to common/util.c
2016-03-07 21:56:04 -08:00
vboot_hash.h
vboot_hash: Abort hash calculation on flash write
2015-07-01 03:49:00 +00:00
vec3.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
vec4.h
common: Add magnetometer online calibration.
2015-10-13 05:28:54 -07:00
version.h
zinger: samus_pd: change zinger SW ver to report commit count
2014-08-28 20:12:52 +00:00
watchdog.h
…
wireless.h
Initial Glower commit
2015-01-20 20:56:43 +00:00