Move all the peripheral blocks base addresses in a common block rather
than spread among the register definitions.
This will help making a cleaner STM32H7 implementation whose base
addresses are all different from other families.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
BRANCH=none
BUG=b:67081508
TEST=compare all the ec.bin generated by 'make buildall' and verify
they are bit-identical with and without the change.
Change-Id: I52cafd2f3c9145dbcd585166df3fc78e38573bb4
Nobody is calling the flush function for consumer_ops structure,
so let's remove it to save flash space, until we find a use for it.
CQ-DEPEND=CL:*529221
BRANCH=none
BUG=chromium:795624
TEST=make buildall -j, saves from 40 to 128 bytes on some boards.
Change-Id: Iad18b30f419ccebc54a90914ec46da84b8d19601
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/826905
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
We need to change PLL settings if host apply eSPI operating
frequency higher than 50MHz, because FND clock is required
to be higher than half of operating frequency.
BRANCH=none
BUG=b:70537592
TEST=Change PLL succeed with chip select is low.
Change-Id: Ieba62f33ed024aed7a8e7f4cc48b1398ed781170
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/817717
Reviewed-by: Randall Spangler <rspangler@chromium.org>
In order to make a single hammer image support both base with and
without keyboard backlight. We need a way to dynamically determine if
backlight is present, and send the correct HID descriptors. This is done
through declaring two HID descriptors and return the correct one
depending on whether or not the backlight is present.
BRANCH=none
BUG=b:67722756
TEST=On reworked board with pull-down on backlight pin,
USB descriptor has backlight HID report descriptor, and is
functional.
TEST=On old board with both pull-up and pull-down (equivalent to
having pull-up only, i.e. no backlight)
USB descriptor does not have backlight HID report descriptor
Change-Id: Ie3eac9b3d4cd749308ccfb96a7db469701f9793b
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/770600
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In some cases, we want to be able to dynamically modify a few bytes
in the USB descriptor (in our case, length of referenced items),
but it could also be other things like flags.
These 2 new functions allow to keep all the USB descriptor in flash, and
modify these few bytes before writing them in the USB buffer.
BRANCH=none
BUG=b:37447752
TEST=Flash hammer, USB descriptors are valid.
Change-Id: I8624255fa43f52a0aaa21d20e963f3974f236912
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/771057
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
For debug, in common code let's log the watchdog PC
and task id as our SW panic params.
BUG=chromium:790006
BRANCH=none
TEST=manually test scarlet rev2 from a1-a3, b1-b2:
(a1) Add 'while(1);' in button ISR
(a2) Boot and press the button
(a3) When watchdog is triggeried, check with 'panicinfo'
that saved R5 is the PC for button ISR.
(b1) 'crash watchdog' in EC console
(b2) Check with 'panicinfo' that CONSOLE task id is saved in
EXCEPTION and PC is saved in R5.
Change-Id: I64d2fcf594dd24b0951e002ab8e80ebcac2d1def
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/803618
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
us_to_rtcss() could return an invalid value when us approached 1 sec
due to precision loss in the divisor. Change the calculation order to
divide last to eliminate precision loss.
BUG=b:68185182
BRANCH=None
TEST=On scarlet, Verify hw clock closely matches reality w/ low-power idle.
Verify EC doesn't watchdog for 5 hours in S5 / G3 w/ low-power idle. Verify
suspend-stress-test still succeeds to wake device on alarm.
Change-Id: Id40797dd4291e94a54a09bbbdbc1a7f7a00a01b4
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/818332
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
stm32f0 / f3 can take up to 40ms to erase a single sector of flash. Also
add a note about instruction fetch being blocked on flash operation
completion.
TEST=`make buildall -j`
BUG=b:70193071
BRANCH=None
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: Icb6c199a975b31f4fa7c73ceb6ad8ec06150abb1
Reviewed-on: https://chromium-review.googlesource.com/815276
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The PNPCFG (EC2I control module) is used to set I/O port base
address and IRQ number.
On it8320, PNPCFG will be reset while system event PLTRST_L
is asserted. This means we can't decode I/O cycles correctly
until we re-initialize PNPCFG.
We disable this reset source, then we don't need to re-initialize
PNPCFG for each PLTRST_L asserted.
BRANCH=none
BUG=none
TEST=MECC board with it8320 + Intel SKL-Y RVP3 and boot to shell.
Change-Id: I7efe8f726939245424237c1d153df4f83b39ae6b
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/810428
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Even if we set the rtc alarm timeout for more than 86400 secs,
we should not crash the system.
BUG=chromium:768042
BRANCH=none
TEST=on AP console, do 'ectool rtcsetalarm 99999' and
then see 'EC result 3 (INVALID_PARAM)' without crash.
Change-Id: Ic0fa92ff101bce1f4791221c4e1eadaf7a005355
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://chromium-review.googlesource.com/807624
Commit-Ready: Philip Chen <philipchen@chromium.org>
Tested-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
After firmware update, cr50 toggles the EC's reset line, expecting
the system will boot. This isn't the case for Chromebox because it
sets AP_OFF flag on a clean shutdown (to restore the previous power
state after power loss & restore).
This patch adds EC_REBOOT_HIBERNATE_CLEAR_AP_OFF to EC reboot
command. It makes EC first clear AP_OFF then hibernate.
BUG=b:69721737
BRANCH=none
TEST=Verify Fizz reboot after cr50 update.
Change-Id: If3207d7284f244ca1adf0d516ef744dbc739a9c1
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/802632
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Also added CONFI_ISH_I2C_PORT0_SPEED, CONFI_ISH_I2C_PORT1_SPEED, and
CONFI_ISH_I2C_PORT2_SPEED to define speed for each ISH I2C port. By
default, those are set to fast mode, 400kbps, I2C_SPEED_FAST.
The values can be modified in board.h.
BUG=None
BRANCH=None
TEST=On Soraka modified board for ISH, set I2C stardard mode, fast mode
and fast mode plus, measured I2C clock freq using scope respectively and
confirmed the freq matched I2C mode.
Change-Id: I426b50dc935c3760903360a50f6069e99bd0abff
Signed-off-by: li feng <li1.feng@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/784091
Commit-Ready: Li1 Feng <li1.feng@intel.com>
Tested-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
- We have more flash space to use with nds32 toolchain GCC6.3.0,
so we enable a few console commands that were disabled previously.
And we also enable LTO to reduce the size of FW image.
- Put "__wait_evt" function into ram_code section to
fill the gap of flash and improving performance of code-fetch.
BUG=none
BRANCH=none
TEST=boot to kernel on reef_it8320.
Change-Id: I3b745ff80a57ef1163794864c39c22f7e1f86634
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/788712
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Stalling reset during when CS is asserted is useful to start with, it
was added before out of abundance of caution, but come to think of it,
should the reset happen asynchronously driven be the EC, the AP would
be reset too. And when AP is reset on its own accord, it would not be
transmitting anything on the SPI interface.
On top of that it turns out that in some cases reset on ARM platforms
is accompanied by the CS line driven low, which causes infinite loop
if Cr50 is waiting for CS to deassert before proceeding.
BRANCH=cr50
BUG=b:67008109
TEST=verified that RMA reset operates properly on both ARM and x86
platforms.
Change-Id: I43efd0cefa5d6eb543dfd27e3c9fb3b4bf1a8ea6
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/791818
Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
This CL fixed the issue that ec cannot enter low power mode, which
increases more power consumption in s5, by not setting ESPIRSTWE bit.
For more detail, please see the npcx5's errata rev1_7, No.2.21.
BRANCH=none
BUG=b:69351155
TEST=No build errors for "make buildall".
TEST=build and flash soraka, run commands to read the power consumption:
dut-control pp3300_dsw_ec_cfg_reg:0x7327k
dut-control pp3300_dsw_ec_mw -t 20 | grep "@@"
the average power consumption measured reduces from 42.x to 10.x mw.
TEST=do cold reboot stress test for 4 hours and no symptom occurred.
Change-Id: Ic6fd7fe14ae8acaefd4e1a99ca1625254f67d708
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/778709
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
We were using bn_modexp() to perform a simple modular square.
A bn_modexp_word() does this faster.
BRANCH=none
BUG=b:68167013
TEST=generate 128 primes from prng seed and verify they're same as before; tcg_test passes
Change-Id: I411a7d3fe2d68f93dc40bf74b941a637f9aa20ed
Reviewed-on: https://chromium-review.googlesource.com/778057
Commit-Ready: Marius Schilder <mschilder@chromium.org>
Tested-by: Marius Schilder <mschilder@chromium.org>
Reviewed-by: Marius Schilder <mschilder@chromium.org>
Reviewed-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
With the upcoming change to add a new command to get/set/clear host
events and masks, it seems to be the right time to bump up the host
events and masks to 64-bit. We are already out of available host
events. This change opens up at least 32 bits for new host events.
Old EC commands to operate on host events/masks will still deal with
lower 32-bits of the events/mask. On the other hand, the new command
being added will take care of the entire 64-bit events/masks. This
ensures that old BIOS and kernel versions can still work with the
newer EC versions.
BUG=b:69329196
BRANCH=None
TEST=make -j buildall. Verified:
1. hostevent set 0x4000 ==> Sets correct bit in host events
2. hostevent clear 0x4000 ==> Clears correct bit in host events
3. Kernel is able to query and read correct host event bits from
EC. Verified using evtest.
4. Coreboot is able to read correct wake reason from EC. Verified
using mosys eventlog list.
Change-Id: Idcb24ea364ac6c491efc2f8dd9e29a9df6149e07
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/770925
Reviewed-by: Randall Spangler <rspangler@chromium.org>
If the i2c master sends a stop condition before we've buffered the last
Rx byte (eg. due to higher than normal i2c interrupt latency) then we
don't want to drop the last byte on the floor, it's still meaningful.
BUG=b:65711378
BRANCH=glados
TEST=Spam TCPC_REG_ROLE_CTRL commands from caroline to caroline_pd,
verify no errors are observed on either side for 12,000,000
transactions.
Change-Id: I0c4a81d97315cff553a5448c0940746e1ef0ed2c
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/771936
Commit-Ready: Shawn N <shawnn@chromium.org>
Tested-by: Shawn N <shawnn@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
EC_IN_RW signal is used to determine if the switch to dev mode can be
safely made. However, EC_IN_RW needs the EC_RST_L line driven low in
order to be reset. In faft tests that utilize crosEcSoftrecPower
method, EC_RST_L is not being driven by servo to fix other test
failures related to keeping EC and AC reboots in sync.
This CL adds a new argument 'wait-ext' to the EC reboot command.
When this option is used, instead of the EC generating a reset via
it's system watchdog, it will wait 10 seconds for EC_RST_L to be
driven.
BUG=b:64603944
BRANCH=coral
CQ-DEPEND=I086687c3dd7591460099267880d56ab8265d2e4b
TEST=Ran "/usr/bin/test_that --board=coral <ip addr> firmware_DevMode"
mutliple times and verified that it passes. Previoulsy, this test
always fails when the EC is in RW before it starts. Also tested
platform_ServoPowerStateController_USBPluggedin and verified it passed.
Change-Id: I614f9156066d5719601ee43e29c7a064f9bba6e2
Signed-off-by: Scott Collyer <scollyer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/737524
Commit-Ready: Scott Collyer <scollyer@chromium.org>
Tested-by: Scott Collyer <scollyer@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Enables the clock to the debug module so that when connecting via SWD
debugger the watchdog and timers are stopped.
BRANCH=master
TEST=Build on stm32f0x board and connect via SWD, observe no watchdog
reset.
Change-Id: Ic40b16c09acc5920da2c1a39e9391a6b21849d2c
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-on: https://chromium-review.googlesource.com/765290
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Add espi control module for it83xx.
Signed-off-by: Dino Li <dino.li@ite.com.tw>
BRANCH=none
BUG=none
TEST=1. it8390+Intel SKL-Y RVP3 and boot to shell.
2. console command "kbpress 1 4" to test keyboard data.
(board code for espi module test on CL:392587)
Change-Id: I1b32bd16f7e01abf07b9c9a68ebef2399cc9828d
Reviewed-on: https://chromium-review.googlesource.com/394471
Commit-Ready: Dino Li <Dino.Li@ite.com.tw>
Tested-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
The original assembly code of deep sleep bypass will cause build error
if both CONFIG_LOW_POWER_IDLE and CONFIG_LTO are defined when buildiing
board glkrvp/zoombini. This CL fixed it by change the bypass assembly code
from:
asm ("push {r0-r5}\n"
"ldr r0, =0x100A8000\n"
"wfi\n"
"ldm r0, {r0-r5}\n"
"pop {r0-r5}\n"
"isb\n"
);
to:
asm ("push {r0-r5}\n"
"wfi\n"
"ldm %0, {r0-r5}\n"
"pop {r0-r5}\n"
"isb\n" :: "r" (0x100A8000)
);
BRANCH=none
BUG=none
TEST=No build errors for "make buildall".
TEST=build zoombini/glkrvp with CONFIG_LOW_POWER_IDLE and CONFIG_LTO,
no build errors.
TEST=build npcx7_evb/npcx_evb and do stress test for deep idle->wakeup
on EVB, no symptom observed.
Change-Id: I90b13b4baf418e3f4b3234d4811e3978b6436aac
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/756535
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
With this change, we can keep a PWM channel active during
low-power idle (EC deep doze).
BRANCH=none
BUG=none
TEST=The pwm channel is function normally in deep doze mode.
And tested pwm frequency setting are:
300, 250, 200, 150, 100, 50, and 10 (Hz)
Change-Id: Ie94cd96e819c869bdde6d7675d8f1a6cfc627f3b
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Reviewed-on: https://chromium-review.googlesource.com/752702
Reviewed-by: Randall Spangler <rspangler@chromium.org>
With these changes
$ CROSS_COMPILE_nds32=/opt/coreboot-sdk/bin/nds32le-elf- \
make BOARD=it83xx_evb
works for me.
The -mno-gp-direct option is replaced with -mcmodel=large in new
compilers, as indicated in private email with Andes Tech. It was also
used as a work-around and leaving out the option altogether reduces the
code size significantly, so it's now dropped.
BRANCH=none
BUG=b:35572628
TEST=the above command creates an image
Change-Id: Ib580d65e6e52f291fdb920b7b65fb22cfda9f736
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/753623
Commit-Ready: Stefan Reinauer <reinauer@google.com>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Sometimes the AP will generate a short 'wake' pulse on the SPS CS line
just in case the chip is in the sleep state. This pulse is supposed to
wake up the chip and prepare it to process the actual SPS transaction
which follows the wake pulse in 100 us.
It turns out that under certain conditions it takes the Cr50 longer
than 100 us to react to the wake pulse, for instance when it writing
into flash which is in the same bank the code is running from, there
is no way to avoid stalling in this case.
What happens then is that the 'CS deasserted' interrupt for the wake
pulse comes while the actual SPS transaction is in progress. In this
case when processing the CS deassertion interrupt the Cr50 should not
consider it an end of a transaction, but just ignore it making sure
that the next CS deassertion still would trigger an interrupt.
BRANCH=none
BUG=b:68012381
TEST=verified that this patch helps the AP firmware test case which
was often failing due to TPM getting out of sync.
Change-Id: I412459552f4b2d13cd72800c1af7d583226e8466
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/754505
TPM reset processing takes certain time, and conceivably the AP could
start SPI transactions before TPM reset is finished. If the SPS
interface comes up while the CS line is active, the H1 controller
considers this a start of the SPI cycle, even though it is not - the
AP has already transferred the header and is waiting for the flow
control.
Let's not complete SPS interface initialization while the CS line is
kept active.
BRANCH=cr50
BUG=b:68012381
TEST=verified that the AP firmware test passes
Change-Id: I53cd49c6139f3c29c4b6d234c7ee4d527c8282f6
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/754504
Reviewed-by: Randall Spangler <rspangler@chromium.org>
There is no point in invoking SPS receive handler if there has been no
data transferred while CS was asserted, as would be the case when the
AP generates the wake up pulse.
Also, make sure that the flag indicating that data was seen is cleared
when the interface is reinitialized, as TPM reset could come during an
SPS transaction.
BRANCH=cr50
BUG=b:68012381
TEST=verified that the AP firmware test passes
Change-Id: I82d63d257b67a715d6dbc540c2d7480e5ff718ff
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/754503
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Reviewed-by: Andrey Pronin <apronin@chromium.org>
Events used when TPM task is running are defined in two different
places, one of them shared with other boards running on H1.
Let's avoid collision by redefining Cr50 only events to be different
from shared ones used by dcrypto.
BRANCH=cr50
BUG=b:68729265
TEST=verified that there is no more 'tpm_reset_request: already
scheduled' messages generated when TPM is reset when performing
long dcrypto operation.
Change-Id: Ic9517fa98be21f3ef5f19b82c593d96b0ddbaf6b
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/756914
Reviewed-by: Nagendra Modadugu <ngm@google.com>
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
Currently the Cr50 code resets TPM communications layer at a certain
point during TPM reset process.
It turns out that this is not sufficient - the comms layer keeps
receiving and trying to invoke TPM layer, which does not mesh well
with TPM reset.
Let's provide two callbacks for each comms layer - to shut it down and
to bring it back up. We shut down the comms when starting TPM reset
and bring them back up when reset is completed.
BRANCH=cr50
BUG=b:68012381
TEST=ran AP firmware test suite on both SPI and I2C based devices.
Change-Id: I7caf4a09b9a5c6e5fc6bfe60eae1c0d64ab24904
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/754502
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
gcc 6.3 (as provided by coreboot-sdk) needs that to know which code
paths end early.
Also add a loop after the command that is "supposed" to reset the
machine so that the compiler believes it (and in case that assumption
fails).
BRANCH=none
BUG=b:65441143
TEST=none
Change-Id: Idb87253ec7880d66ffec30d75f4d007f02f63aab
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://chromium-review.googlesource.com/742916
Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Add a common hook handler on CHIPSET_RESUME to log port80 resume
message instead of duplicating the same code in all chip lpc_resume.
BUG=b:68669668
BRANCH=None
TEST=Verified that port80 resume is logged on S0ix and S3 resume.
Change-Id: I313692f5499717d0d8f62be2ba3b8566c46e4dde
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/745362
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a new LPC helper routine lpc_resume_clear_masks that can be used
to clear SCI, SMI and wake masks upon resume from S3. This is done to
mask the events until host explicitly unmasks them.
It also ensures that these masks do not get reset on resume from S0ix
where the host does not re-configure these masks.
BUG=b:68669668
BRANCH=None
TEST=Verified following:
1. make -j buildall
2. On resume from S0ix, SCI mask is not reset.
3. On resume from S3, SCI mask is reset and then set again by host request.
Change-Id: I17a86bd60ef066b3716fb79ecce62f311eb45509
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/745533
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
According npcx ec wake-up mechanism by espi VW events, the driver
needs to make sure the IE/WE bits in VWEVMSn and the VWUPD bit in
ESPIWE registers are both set. Or ec won't wakeup by VW signals until
the other wake-up events occured. (WE bit of VWEVMSn is introduced on
npcx7.)
In this CL, we turn on IE/WE bit in VWEVMSn registers during espi driver
initialization and toggle the bits of ESPIWE register for VW and general
events such as ESPI_RST and so on when ec turn on/off host interface's
interrupts to make sure ec can wake-up from deep idle by espi events in
time.
BRANCH=none
BUG=none
TEST=No build errors for npcx5/7 series. Using "suspend_stress_test -c
1000" to do stress test and no symptom occurred on poppy. Both warmboot
and coldboot stress test for 5 hours and no symptom occurred on poppy.
Change-Id: I853532508bf9da5f3abc39e20ab848e659ca5e26
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/725559
Reviewed-by: Amit Maoz <amit.maoz@nuvoton.corp-partner.google.com>
Reviewed-by: Shawn N <shawnn@chromium.org>
Also, fix uart_rx_available to only call
clock_refresh_console_in_use when the default pad is selected.
BRANCH=none
BUG=b:65526215
TEST=On Lux, EC console works, so does pad-switching EC-EC comm,
and idlestats shows that the EC goes to deep sleep.
TEST=In uart_alt_pad_write_read, increase usleep time in loop from
100 to 10000 (the shorter 100us time prevents EC from going
into deep sleep during the transaction), no transaction
error in EC-EC communication when system goes into deep sleep.
Change-Id: I3855b07f37def0ac9cfd700318ba64c432d3c42b
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/735103
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Define NPCX_UART_* macros instead of having so many ifdef
NPCX_UART_MODULE2 in the code.
Also, do not set NPCX_WKEDG bit in npcx_uart2gpio: instead
set it in uart_config just just like NPCX7 does it.
BRANCH=none
BUG=b:65526215
TEST=On Lux, EC console works, so does pad-switching EC-EC comm.
TEST=Flash soraka, using "idlestats", check that EC goes into
deep sleep, and that it can be woken up typing in EC console.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Change-Id: I84b4f980fa79ed43640df4afc23cdc24cca21d99
Reviewed-on: https://chromium-review.googlesource.com/730029
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
NPCX5* only has one UART controller, which can be switched
between 2 pads. We keep the default pad for EC console,
however, we allow switching to the alternate pad for short,
infrequent, transactions. Both pads are assumed to use the
same baudrate and other line settings.
When switching pad, we first configure the new pad, then switch
off the old one, to avoid having no pad selected at a given time,
see b/65526215#c26.
Because of the added complexity of npcx_gpio2uart (and the fact
that it uses the global variable "pad" define in uart.c), we
move the implementation to uart.c (npcx_uart2gpio is also moved
for consistency).
When the pad is switched to alternate pad, characters input
and output on the EC console (default pad) would be lost. To
compensate for this, we:
- Switch back to main pad in case of EC panic, so that output
is shown on EC console.
- Immediately abort current alternate pad transaction if a
character is received on the default pad. Note, however,
that the first character will be lost (this can be worked
around by telling user to press enter, and have servod/FAFT
always send 2 blank lines (instead of just one) before
sending a command).
- Inhibit pad switching for 500ms after receiving a character
on default pad. Assuming a reasonable typing speed, this
should allow developers to type console commands relatively
comfortably, while not starving the alternate pad communication
for too long.
The logic above could be simplified significantly by implementing
software flow control (XON/XOFF, see b/67026316).
BRANCH=none
BUG=b:65526215
TEST=While follow-up CL that writes long 1k buffers, the following
works fine:
- type 'uart' in EC console
- Read battery power consumption from servod, which "types" in
the EC console:
while true; do dut-control ppvar_vbat_mw; sleep 1; done
no failure is seen.
TEST=Add this test code in uart_alt_pad_read_write, after the pad
has been switched, and check that panic information is
consistently printed correctly:
{
static int t;
if (t++ > 20)
t = t / ret;
}
Change-Id: I18feed2f8ca4eb85f40389f77dac3a46315310e7
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/659458
Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
In some scenarios we want to take RW updates w/o taking version numbers into consideration,
much like the behavior we get w/ CR50_DEV.
But then without the additional CR50_DEV features enabled for the rest of the code.
BRANCH=none
BUG=none
TEST=compiles
Change-Id: I7dd946ab77bbdc35850ed934cd53735418e13845
Reviewed-on: https://chromium-review.googlesource.com/724967
Reviewed-by: Marius Schilder <mschilder@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: Marius Schilder <mschilder@chromium.org>
Trybot-Ready: Marius Schilder <mschilder@chromium.org>
Instead of duplicating the handling of host events and host event
masks in chip lpc drivers, add routines in common code to provide
basic functions like setting/getting of masks, setting/getting of
events and handling of masks transitions across sysjump.
BUG=None
BRANCH=None
TEST=make -j buildall. Verified following:
1. Event masks are correctly retained across sysjumps.
2. Wake from S3 works fine.
3. Wake from S0ix works fine.
4. SCI generated correctly.
Change-Id: Ie409f91b12788e4b902b2627e31ba5ce40ff1d27
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/707771
Reviewed-by: Shawn N <shawnn@chromium.org>
It turns out the code logic is not exactly correct: the range for
coarse trim values is 0..0xFF.
Use the fixed top of the range value and do not print messages if the
value is at the range boundary.
BRANCH=cr50
BUG=b:67788437
TEST=Observed occasional messages on the Cr50 console when
plugging/unplugging Suzy-Q, but not the constant spew.
Change-Id: I94ab581769ba8326346b636b1342136e98d61ff1
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/723981
Reviewed-by: Bill Richardson <wfrichar@chromium.org>
In npcx5, the flash interface pinmux should be turned on in order to
access the external flash. However, in npcx7, the internal flash is
used. It is meaningless to turn the pinmux on. And it also causes the
alternative function of these pins not work normally(such as
GPIOA0/GPIOA2) if the pinmux is enabled. This CL uses the preprocessor
flag NPCX_INT_FLASH_SUPPORT to conditionally prohibit the execution of
flash pinmux code.
BRANCH=none
BUG=none
TEST=No build errors for "make buildall". Build npcx_evb and npcx7_evb
boards, make sure the pinmux are correctly configured seperately.
Change-Id: Iba2300159f204b65d15852ec1755714df0c64816
Signed-off-by: CHLin <CHLIN56@nuvoton.com>
Reviewed-on: https://chromium-review.googlesource.com/704316
Commit-Ready: CH Lin <chlin56@nuvoton.com>
Tested-by: CH Lin <chlin56@nuvoton.com>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Previously, an error reading Board ID would prevent any image from
running, even a wildcard (unrestricted) image with mask=flags=0 which
would match any Board ID.
Now, if Board ID can't be read, match the image against
type=type_inv=flags=0. This will match only an unrestricted image.
(This is better than checking directly for an unrestricted image,
because that check is more susceptible to clock-jitter-induced errors.)
BUG=b:67651806
BRANCH=cr50
TEST=Hack read_board_id() to return error. See that an unrestricted
image will now boot.
Change-Id: I1071e146b4541e8efd50c8409b8f76012a107731
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/713574
Reviewed-by: Mary Ruthven <mruthven@chromium.org>
