Merge pull request #540 from Telecominfraproject/staging-fix-nns-feed

ipq807x: fix qca-nss-clients feed

.github/actions/create-ami-from-image/action.yml

@@ -0,0 +1,39 @@
+name: Create AMI from firmware image in S3 bucket
+
+inputs:
+  firmware_image_name:
+    description: Name of the firmware image
+    required: true
+  firmware_image_s3_bucket:
+    description: Name of the S3 bucket where the image resides
+    required: true
+
+runs:
+  using: "composite"
+  steps:
+    - name: Import snapshot based on firmware image
+      id: import_snapshot
+      shell: bash
+      run: |
+        echo "import_task_id=$(aws ec2 import-snapshot --description '${{ inputs.firmware_image_name }}' --disk-container 'Format=raw,UserBucket={S3Bucket=${{ inputs.firmware_image_s3_bucket }},S3Key=${{ inputs.firmware_image_name }}}' | jq -r '.ImportTaskId')" >> $GITHUB_OUTPUT
+
+    - name: Wait for import task to complete and get snapshot ID
+      id: get_snapshot_id
+      shell: bash
+      run: |
+        IMPORT_TASK_STATUS=""
+        while [[ $IMPORT_TASK_STATUS != 'completed' ]]; do
+          IMPORT_TASK_STATUS=$(aws ec2 describe-import-snapshot-tasks --import-task-ids ${{ steps.import_snapshot.outputs.import_task_id }} | jq -r '.ImportSnapshotTasks[].SnapshotTaskDetail.Status')
+          echo "Import task status is $IMPORT_TASK_STATUS, waiting for completion."
+        done
+        echo "id=$(aws ec2 describe-import-snapshot-tasks --import-task-ids ${{ steps.import_snapshot.outputs.import_task_id }} | jq -r '.ImportSnapshotTasks[].SnapshotTaskDetail.SnapshotId')" >> $GITHUB_OUTPUT
+
+    - name: Tag snapshot with image name
+      shell: bash
+      run: |
+        aws ec2 create-tags --resources ${{ steps.get_snapshot_id.outputs.id }} --tags 'Key=Name,Value=${{ inputs.firmware_image_name }}'
+
+    - name: Register AMI based on snapshot
+      shell: bash
+      run: |
+        aws ec2 register-image --name '${{ inputs.firmware_image_name }}' --root-device-name /dev/xvda --block-device-mappings 'DeviceName=/dev/xvda,Ebs={SnapshotId=${{ steps.get_snapshot_id.outputs.id }}}'

.github/workflows/build-dev.yml

@@ -1,5 +1,13 @@
 name: Build OpenWrt/uCentral images
 
+env:
+  AWS_DEFAULT_OUTPUT: json
+  AWS_DEFAULT_REGION: us-east-1
+  AWS_S3_BUCKET_NAME: ucentral-ap-firmware
+  AWS_ACCOUNT_ID: ${{ secrets.UCENTRAL_S3_ACCOUNT_ID }}
+  AWS_ACCESS_KEY_ID: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_ID }}
+  AWS_SECRET_ACCESS_KEY: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_SECRET }}
+
 on:
   push:
     branches: [ main, next, staging-* ]
@@ -8,13 +16,15 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
+    outputs:
+      x64_vm_image_name: ${{ steps.package_and_upload_image.outputs.x64_vm_image_name }}
     strategy:
       fail-fast: false
       matrix:
-        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c', 'cig_wf194c4', 'cig_wf160d', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'indio_um-305ac', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'tp-link_ec420-g1', 'tplink_ex227', 'tplink_ex228', 'tplink_ex447', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4' ]
+        target: ['actiontec_web7200', 'cig_wf188n', 'cig_wf194c4', 'cig_wf196-us', 'cig_wf196-ca', 'cig_wf610d', 'cig_wf660a', 'cig_wf808', 'cybertan_eww622-a1', 'edgecore_eap101', 'edgecore_eap102', 'edgecore_eap104', 'liteon_wpx8324', 'edgecore_ecs4100-12ph', 'edgecore_ecw5211', 'edgecore_ecw5410', 'edgecore_oap100', 'edgecore_ssw2ac2600', 'edgecore_spw2ac1200', 'edgecore_spw2ac1200-lan-poe', 'hfcl_ion4', 'hfcl_ion4xe', 'hfcl_ion4xi', 'hfcl_ion4x', 'hfcl_ion4x_2', 'indio_um-305ac', 'indio_um-305ax', 'indio_um-325ac', 'indio_um-510ac-v3', 'indio_um-550ac', 'indio_um-310ax-v1', 'indio_um-510axp-v1', 'indio_um-510axm-v1', 'linksys_ea6350-v4', 'linksys_e8450-ubi', 'linksys_ea8300', 'meshpp_s618_cp03', 'meshpp_s618_cp01', 'udaya_a5-id2', 'wallys_dr40x9', 'wallys_dr6018', 'wallys_dr6018_v4', 'x64_vm', 'yuncore_ax840', 'yuncore_fap640', 'yuncore_fap650' ]
 
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
 
     - name: Build image for ${{ matrix.target }}
       id: build
@@ -24,17 +34,12 @@ jobs:
         make -j TARGET=${{ matrix.target }}
 
     - name: Package and upload image for ${{ matrix.target }}
+      id: package_and_upload_image
       env:
           GH_BUILD_USERNAME: ${{ secrets.GH_BUILD_USERNAME }}
           GH_BUILD_PASSWORD: ${{ secrets.GH_BUILD_PASSWORD }}
           ARTIFACTORY_USERNAME: cicd-indoor-main
           ARTIFACTORY_PASSWORD: ${{ secrets.ARTIFACTORY_PASSWORD }}
-          AWS_S3_BUCKET_NAME: ucentral-ap-firmware
-          AWS_DEFAULT_OUTPUT: json
-          AWS_DEFAULT_REGION: us-east-1
-          AWS_ACCOUNT_ID: ${{ secrets.UCENTRAL_S3_ACCOUNT_ID }}
-          AWS_ACCESS_KEY_ID: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_ID }}
-          AWS_SECRET_ACCESS_KEY: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_SECRET }}
       run: |
         LOWERCASE_TARGET=`echo ${{ matrix.target }} | tr '[:upper:]' '[:lower:]'`
         HASH=$(git rev-parse --short HEAD)
@@ -66,6 +71,10 @@ jobs:
         [ -f openwrt/tmp/image-file ] && aws s3 cp --acl public-read --content-type "application/json" "latest-upgrade.json" "s3://$AWS_S3_BUCKET_NAME/$JSON_NAME"
         [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$JSON_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
 
+        if [ ${{ matrix.target }} == 'x64_vm' ]; then
+          echo "x64_vm_image_name=$(echo $IMG_NAME)" >> $GITHUB_OUTPUT
+        fi
+
   trigger-testing:
     runs-on: ubuntu-latest
     needs: build
@@ -78,3 +87,16 @@ jobs:
         repository: Telecominfraproject/wlan-testing
         event-type: new-ap-release
         client-payload: '{"ref": "${GITHUB_REF#refs/tags/}", "sha": "${{ github.sha }}"}'
+
+  create-x64_vm-ami:
+    runs-on: ubuntu-latest
+    needs: build
+    if: startsWith(github.ref, 'refs/tags/v')
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Use create-ami-from-image composite action
+      uses: ./.github/actions/create-ami-from-image
+      with:
+        firmware_image_name: ${{ needs.build.outputs.x64_vm_image_name }}
+        firmware_image_s3_bucket: ${{ env.AWS_S3_BUCKET_NAME }}

.github/workflows/x64_vm-build-test.yml

@@ -0,0 +1,88 @@
+name: Test x64_vm build and AMI creation
+
+env:
+  AWS_DEFAULT_OUTPUT: json
+  AWS_DEFAULT_REGION: us-east-1
+  AWS_S3_BUCKET_NAME: ucentral-ap-firmware
+  AWS_ACCOUNT_ID: ${{ secrets.UCENTRAL_S3_ACCOUNT_ID }}
+  AWS_ACCESS_KEY_ID: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_ID }}
+  AWS_SECRET_ACCESS_KEY: ${{ secrets.UCENTRAL_S3_ACCESS_KEY_SECRET }}
+
+on:
+  workflow_dispatch:
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    outputs:
+      x64_vm_image_name: ${{ steps.package_and_upload_image.outputs.x64_vm_image_name }}
+    strategy:
+      fail-fast: false
+      matrix:
+        target: ['x64_vm']
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Build image for ${{ matrix.target }}
+      id: build
+      run: |
+        git config --global user.email "you@example.com"
+        git config --global user.name "Your Name"
+        make -j TARGET=${{ matrix.target }}
+
+    - name: Package and upload image for ${{ matrix.target }}
+      id: package_and_upload_image
+      env:
+        GH_BUILD_USERNAME: ${{ secrets.GH_BUILD_USERNAME }}
+        GH_BUILD_PASSWORD: ${{ secrets.GH_BUILD_PASSWORD }}
+        ARTIFACTORY_USERNAME: cicd-indoor-main
+        ARTIFACTORY_PASSWORD: ${{ secrets.ARTIFACTORY_PASSWORD }}
+      run: |
+        LOWERCASE_TARGET=`echo ${{ matrix.target }} | tr '[:upper:]' '[:lower:]'`
+        HASH=$(git rev-parse --short HEAD)
+
+        if [[ ${GITHUB_REF} == "refs/heads/"* ]]
+        then
+          REF=$(echo ${GITHUB_REF#refs/heads/} | tr '/' '-')
+          IS_RELEASE="false"
+        else
+          REF=$(echo ${GITHUB_REF#refs/tags/} | tr '/' '-')
+          IS_RELEASE="true"
+        fi
+
+        BASENAME="$(date +%Y%m%d)-$LOWERCASE_TARGET-$REF-$HASH"
+        TAR_NAME="$BASENAME.tar.gz"
+        IMG_NAME="$BASENAME-upgrade.bin";
+        JSON_NAME="$BASENAME.json";
+
+        tar cfz "$TAR_NAME" -C openwrt/bin/targets/ .
+        curl -s -u $GH_BUILD_USERNAME:$GH_BUILD_PASSWORD -T "$TAR_NAME" "https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/uCentral/$LOWERCASE_TARGET/"$TAR_NAME""
+        IMG_NAME="$BASENAME-upgrade.bin";
+        TIP_VERSION="$(grep DISTRIB_TIP= openwrt/tmp/openwrt_release | cut -d\' -f2)"
+        echo -e "{\n\t\"image\":\""${IMG_NAME}"\",\n\t\"revision\": \""${TIP_VERSION}"\",\n\t\"timestamp\":\""$(date +%s)"\",\n\t\"compatible\": \""${LOWERCASE_TARGET}"\"\n}" > latest-upgrade.json
+        [ -f openwrt/tmp/image-file ] && curl -s -u $GH_BUILD_USERNAME:$GH_BUILD_PASSWORD -T "openwrt/$(cat openwrt/tmp/image-file)" "https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/uCentral/$LOWERCASE_TARGET/"$IMG_NAME""
+        [ -f openwrt/tmp/image-file ] && curl -s -u $GH_BUILD_USERNAME:$GH_BUILD_PASSWORD -T "latest-upgrade.json" "https://tip.jfrog.io/artifactory/tip-wlan-ap-firmware/uCentral/$LOWERCASE_TARGET/latest-upgrade.json"
+
+        [ -f openwrt/tmp/image-file ] && aws s3 cp --acl public-read --content-type "application/octet-stream" "openwrt/$(cat openwrt/tmp/image-file)" "s3://$AWS_S3_BUCKET_NAME/$IMG_NAME"
+        [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$IMG_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
+        [ -f openwrt/tmp/image-file ] && aws s3 cp --acl public-read --content-type "application/json" "latest-upgrade.json" "s3://$AWS_S3_BUCKET_NAME/$JSON_NAME"
+        [ -f openwrt/tmp/image-file ] && aws s3api put-object-tagging --bucket "$AWS_S3_BUCKET_NAME" --key "$JSON_NAME" --tagging "{\"TagSet\":[{\"Key\":\"release\",\"Value\":\"$IS_RELEASE\"}]}"
+
+        if [[ ${{ matrix.target }} == 'x64_vm' ]]; then
+            echo "x64_vm_image_name=$(echo $IMG_NAME)" >> $GITHUB_OUTPUT
+        fi
+
+  create-x64_vm-ami:
+    runs-on: ubuntu-latest
+    needs: build
+    steps:
+    - uses: actions/checkout@v3
+      with:
+        ref: WIFI-7206-add-workflow-to-build-virtual-ap-image
+
+    - name: Use create-ami-from-image composite action
+      uses: ./.github/actions/create-ami-from-image
+      with:
+        firmware_image_name: ${{ needs.build.outputs.x64_vm_image_name }}
+        firmware_image_s3_bucket: ${{ env.AWS_S3_BUCKET_NAME }}

README.md

@@ -1,20 +1,83 @@
-# Setting up your build machine
+# OpenWiFi AP NOS
 
-Requires a recent linux installation. Older systems without python 3.7 will have trouble.  See this link for details: https://openwrt.org/docs/guide-developer/quickstart-build-images
+OpenWrt-based access point network operating system (AP NOS) for TIP OpenWiFi.
+Read more at [openwifi.tip.build](https://openwifi.tip.build/).
 
-Install build packages:  sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml.
+## Building
 
-# Doing a native build on Linux
-First we need to clone and setup our tree. This will result in an openwrt/.
+### Setting up your build machine
+
+Building requires a recent Linux installation. Older systems without Python 3.7
+will have trouble. See this guide for details:
+https://openwrt.org/docs/guide-developer/toolchain/beginners-build-guide
+
+Install build packages on Debian/Ubuntu (or see above guide for other systems):
 ```
-./setup.py --setup
+sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml
 ```
-Next we need to select the profile and base package selection. This setup will install the feeds, packages and generate the .config file.
+
+### Doing a native build on Linux
+
+Use `./build.sh <target>`, or follow the manual steps below:
+
+1. Clone and set up the tree. This will create an `openwrt/` directory.
+```shell
+./setup.py --setup    # for subsequent builds, use --rebase instead
 ```
+
+2. Select the profile and base package selection. This setup will install the
+   feeds and packages and generate the `.config` file.
+```shell
 cd openwrt
-./scripts/gen_config.py ea8300
+./scripts/gen_config.py linksys_ea8300
 ```
-Finally we can build the tree.
-```
-make -j X V=s
+
+3. Build the tree (replace `-j 8` with the number of cores to use).
+```shell
+make -j 8 V=s
 ```
+
+### Build output
+
+The build results are located in the `openwrt/bin/` directory:
+
+| Type             | Path                                                 |
+| ---------------- | ---------------------------------------------------- |
+| Firmware images  | `openwrt/bin/targets/<target>/<subtarget>/`          |
+| Kernel modules   | `openwrt/bin/targets/<target>/<subtarget>/packages/` |
+| Package binaries | `openwrt/bin/packages/<platform>/<feed>/`            |
+
+## Developer Notes
+
+### Branching model
+
+- `main` - Stable dev branch
+- `next` - Integration branch
+- `staging-*` - Feature/bug branches
+- `release/v#.#.#` - Release branches (*major.minor.patch*)
+
+### Repository structure
+
+Build files:
+- `Makefile` - Calls Docker environment per target
+- `dock-run.sh` - Dockerized build environment
+- `docker/Dockerfile` - Dockerfile for build image
+- `build.sh` - Build script
+- `setup.py` - Clone and set up the tree
+- `config.yml` - Specifies OpenWrt version and patches to apply
+
+Directories:
+- `feeds/` - OpenWiFi feeds
+- `patches/` - OpenWiFi patches applied during builds
+- `profiles/` - Per-target kernel configs, packages, and feeds
+    - [wifi-ax](profiles/wifi-ax.yml): Wi-Fi AX packages
+    - [ucentral-ap](profiles/ucentral-ap.yml): uCentral packages
+    - [x64_vm](profiles/x64_vm.yml): x86-64 VM image
+
+### uCentral packages
+
+AP-NOS packages implementing the uCentral protocol include the following
+repositories (refer to the [ucentral](feeds/ucentral/) feed for a full list):
+- ucentral-client: https://github.com/Telecominfraproject/wlan-ucentral-client
+- ucentral-schema: https://github.com/Telecominfraproject/wlan-ucentral-schema
+- ucentral-wifi: https://github.com/blogic/ucentral-wifi

config.yml

@@ -14,3 +14,4 @@ patch_folders:
   - patches/ipq807x
   - patches/rtkmipsel
   - patches/rest
+  - patches/x86

feeds/facebook/fbwifi/Makefile

@@ -1,77 +0,0 @@
-# Copyright (c) Facebook, Inc. and its affiliates.
-# All rights reserved.
-#
-# This source code is licensed under the license found in the
-# LICENSE file in the root directory of this source tree.
-#
-
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fbwifi
-PKG_VERSION:=2
-PKG_RELEASE:=0
-PKG_LICENSE:=GPL-2.0
-
-PKG_MAINTAINER:=Simon Kinane <skinane@fb.com>
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fbwifi
-  SUBMENU:=Captive Portals
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+iptables +luasec +luasocket \
-	+libuci-lua +luaposix \
-	+lua-cjson +uhttpd
-  TITLE:=Facebook Wi-Fi
-  PKGARCH:=all
-endef
-
-define Package/fbwifi/description
-  Facebook Wi-Fi, an AP authorisation solution
-endef
-
-
-define Package/luci-app-fbwifi
-  SUBMENU:=3. Applications
-  SECTION:=luci
-  CATEGORY:=LuCI
-  TITLE:=LuCI support for Facebook Wi-Fi
-  DEPENDS:= \
-	+fbwifi \
-	+luci-base +luci-mod-network +luci-mod-status +luci-theme-bootstrap
-endef
-
-define Package/luci-app-fbwifi/description
-  LuCI support for Facebook Wi-Fi
-endef
-
-
-define Package/fbwifi/conffiles
-/etc/config/fbwifi
-endef
-
-define Build/Prepare
-endef
-
-define Build/Configure
-endef
-
-define Build/Compile
-endef
-
-define Package/fbwifi/install
-	$(INSTALL_DIR) $(1)
-	$(CP) ./files/fbwifi/* $(1)/
-endef
-
-define Package/luci-app-fbwifi/install
-	$(INSTALL_DIR) $(1)
-	$(CP) ./files/luci-app-fbwifi/* $(1)
-endef
-
-$(eval $(call BuildPackage,fbwifi))
-$(eval $(call BuildPackage,luci-app-fbwifi))

feeds/facebook/fbwifi/README.md

@@ -1,22 +0,0 @@
-# Facebook Wi-Fi v2.0 Reference Implementation for OpenWrt 
-
-## Getting started
-
-Case studies for OEM customers are available at the official page of [Facebook Wi-Fi](https://www.facebook.com/facebook-wifi).
-
-For OEM engineers, start by reading the init script in [files/etc/init.d/fbwifi](https://github.com/facebookincubator/fbc_owrt_feed/blob/master/fbwifi/files/etc/init.d/fbwifi)
-
-To enable Facebook Wi-Fi, configure the gateway_token in `/etc/config/fbwifi`, and run `fbwifi enable`.
-To disable Facebook Wi-Fi, run `fbwifi disable`.
-
-## Contents
-
-The 'files' subdirectory contains two subdirectories, one for the fbwifi
-package that implements the Facebook Wi-Fi v2.0 standard for OpenWrt, and
-another one containing a LuCI application to configure Facebook Wi-Fi.
-
-The folder structures follow *nix conventions:
-- 'etc' is the boot time scripts and configuration
-- 'usr' contains procedural scripts, lua common code module and GUI prototype for luci
-- 'www' contains the HTTP endpoints as CGI handlers 
-

feeds/facebook/fbwifi/files/fbwifi/etc/config/fbwifi

@@ -1,6 +0,0 @@
-config fbwifi 'main'
-	option enabled '0'
-	option gateway_token 'FBWIFI:GATEWAY|123456789|0123456789|abcdeABCDE123456789'
-	option http_port '2060'
-	option https_port '2061'
-	option zone 'lan'

feeds/facebook/fbwifi/files/fbwifi/etc/hotplug.d/iface/50-fbwifi

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = ifup ] || exit 0
-
-/etc/init.d/fbwifi enabled || exit 0
-
-ip route get fibmatch 1.1.1.1 | grep -q "$DEVICE" || exit 0
-
-logger -t fbwifi "Reloading fbwifi due to $ACTION of $INTERFACE ($DEVICE)"
-/etc/init.d/fbwifi restart

feeds/facebook/fbwifi/files/fbwifi/etc/init.d/fbwifi

@@ -1,43 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=90
-
-USE_PROCD=1
-
-reload_service() {
-	restart
-}
-
-service_triggers() {
-	procd_add_reload_trigger fbwifi
-}
-
-start_service() {
-
-	config_load fbwifi
-	config_get_bool enabled 'main' 'enabled' '0'
-	[ "$enabled" -eq 0 ] && return
-
-	config_get http_port main http_port
-	[ -z "$http_port" ] && {
-		logger -t fbwifi "required option http_port not set"
-		exit 1
-	}
-
-	config_get https_port main https_port
-	[ -z "$https_port" ] && {
-		logger -t fbwifi "required option https_port not set"
-		exit 1
-	}
-
-	logger "[fbwifi] Enabled; starting"
-
-	mkdir -p /tmp/fbwifi
-
-	/usr/sbin/fbwifi reload
-
-	procd_open_instance
-	procd_set_param command /usr/sbin/fbwifi_validate_token_db
-	procd_set_param respawn 1 300 0
-	procd_close_instance
-}

feeds/facebook/fbwifi/files/fbwifi/usr/lib/lua/fbwifi.lua

@@ -1,156 +0,0 @@
--- SPDX-License-Identifier: GPL-2.0-only
--- Copyright (c) Facebook, Inc. and its affiliates.
---
--- FBWIFI Lua library
--- function table
-local fbwifi = {}
-
-local http = require("ssl.https")
-local json = require("cjson")
-local log = require("posix.syslog")
-local uci = require("uci")
-
-function fbwifi.gateway_token()
-	token = uci.get("fbwifi.main.gateway_token")
-	if token and string.len(token) > 0 then
-		return token
-	else
-		log.syslog( log.LOG_WARNING, "[fbwifi] UCI option fbwifi.main.gateway_token is missing" )
-		return nil
-	end 
-end
-
-function fbwifi.validate_token( token )
-
-	local valid = false
-
-	if string.len(token or '' ) > 0 then
-
-	        GATEWAY_TOKEN = fbwifi.gateway_token()
-
-	        URL="https://api.fbwifi.com/v2.0/token"
-	        BODY="token="..token
-	        body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN, BODY)
-
-	        if code==200 then
-	                valid = true
-	        else
-	                log.syslog(log.LOG_WARNING, "[fbwifi] validate_token:"..body)
-	        end
-
-	end
-
-	return valid
-end
-
-local mac_to_purge=''
-function remove_client_by_mac(client)
-	state = uci.cursor("/var/state", "/tmp/fbwifi")
-
-	for key, value in pairs(client) do
-		if
-			key == 'mac' and
-			value == mac_to_purge
-		then
-			log.syslog(log.LOG_INFO, string.format("[fbwifi] Purging DB entry %s for MAC %s", client['.name'] or 'unknown', mac_to_purge) )
-			state:delete("fbwifi", client['.name'])
-			return
-		end
-	end
-end
-
-function fbwifi.instate_client_rule( token, client_mac )
-
-	log.syslog(log.LOG_INFO, "[fbwifi] Validating client "..client_mac)
-
-	state = uci.cursor("/var/state", "/tmp/fbwifi")
-	state_name = "token_" .. token
-
-	RULE_COND="iptables -w -L FBWIFI_CLIENT_TO_INTERNET -t mangle | grep -i -q \"%s\""
-	RULE_FMT="iptables -w -t mangle -%s FBWIFI_CLIENT_TO_INTERNET -m mac --mac-source \"%s\" -j MARK --set-mark 0xfb"
-	local RULE
-
-	log.syslog(log.LOG_INFO, string.format("[fbwifi] Cleaning DB for MAC %s", client_mac) )
-	mac_to_purge = client_mac
-	state:foreach("fbwifi", "client", remove_client_by_mac)
-	
-		
-	log.syslog(log.LOG_INFO, string.format("[fbwifi] Adding DB entry %s for MAC %s", state_name, client_mac) )
-	state:set("fbwifi", state_name, "client")
-	state:set("fbwifi", state_name, "token", token)
-	state:set("fbwifi", state_name, "mac", client_mac)
-	state:set("fbwifi", state_name, "authenticated", "true")
-				
-	-- verify a rule exists for the given client MAC, 
-	--   OR install it
-	RULE=string.format(RULE_COND.." || "..RULE_FMT, client_mac, "A", client_mac)
-
-	log.syslog(log.LOG_INFO, string.format( "[fbwifi] Opening iptables for %s", client_mac ) )
-	res = os.execute(RULE)
-	if res ~= 0 then 
-		log.syslog(log.LOG_WARNING, string.format( "[fbwifi] Failed to update iptables (%s)", res ) )
-	end
-	log.syslog(log.LOG_INFO, "[fbwifi] "..RULE)
-
-	state:save('fbwifi')
-	state:commit('fbwifi')
-end
-
-function fbwifi.revoke_client_rule( token )
-        
-        if (token == nil) then
-                log.syslog(log.LOG_INFO, "[fbwifi] Invalidating token, but token is Nil")
-                return
-        end
-
-	log.syslog(log.LOG_INFO, string.format( "[fbwifi] Invalidating token (%s)", token) )
-
-	state = uci.cursor("/var/state", "/tmp/fbwifi")
-	state_name = "token_" .. token
-	
-	client_mac = state:get("fbwifi", state_name, "mac")
-
-	if client_mac then
-		RULE_COND="iptables -w -L FBWIFI_CLIENT_TO_INTERNET -t mangle | grep -i -q \"%s\""
-		RULE_FMT="iptables -w -t mangle -%s FBWIFI_CLIENT_TO_INTERNET -m mac --mac-source \"%s\" -j MARK --set-mark 0xfb"
-
-		-- verify a rule exists for the given client MAC, 
-		--  AND delete it
-		RULE=string.format(RULE_COND.." && "..RULE_FMT, client_mac, "D", client_mac)
-
-		res = os.execute(RULE)
-		if res ~= 0 then 
-			log.syslog(log.LOG_WARNING, string.format( "[fbwifi] Failed to update iptables (%s)", res ) )
-		end
-		log.syslog(log.LOG_INFO, "[fbwifi] "..RULE)
-
-		state:delete("fbwifi", state_name)
-		state:save('fbwifi')
-		state:commit('fbwifi')
-	else
-		log.syslog(log.LOG_WARNING, string.format( "[fbwifi] Client MAC not found in DB (%s)", state_name ) )
-	end
-end
-
-function fbwifi.reset()
-
-	local success = false
-        GATEWAY_TOKEN = fbwifi.gateway_token()
-        URL="https://api.fbwifi.com/v2.0/gateway/reset"
-	BODY="{}"
-        body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN, BODY)
-
-        if code==200 then
-                log.syslog(log.LOG_INFO, "[fbwifi] Reset committed")
-                success = true
-        else
-                log.syslog(log.LOG_WARNING, "[fbwifi] Reset failed : "..body)
-        end
-
-	return success
-end
-
---
--- Return the function table to the host script
---
-return fbwifi

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi

@@ -1,58 +0,0 @@
-#!/bin/sh
-
-case "$1" in
-disable)
-	uci set fbwifi.main.enabled=0
-
-	uci delete firewall.fbwifi
-
-	uci delete uhttpd.fbwifi_redirect
-
-	uci delete uhttpd.main.json_script
-	uci set uhttpd.main.cert='/etc/uhttpd.crt'
-	uci set uhttpd.main.key='/etc/uhttpd.key'
-	uci set uhttpd.main.rfc1918_filter=1
-	;;
-enable)
-	uci set fbwifi.main.enabled=1
-
-	uci set firewall.fbwifi=include
-	uci set firewall.fbwifi.enabled=1
-	uci set firewall.fbwifi.family=ipv4
-	uci set firewall.fbwifi.path=/usr/share/fbwifi/firewall.include
-	uci set firewall.fbwifi.reload=1
-	uci set firewall.fbwifi.type=script
-
-	uci set uhttpd.fbwifi_redirect=uhttpd
-	uci set uhttpd.fbwifi_redirect.enabled=1
-	uci set uhttpd.fbwifi_redirect.cert='/tmp/fbwifi/https_server_cert'
-	uci set uhttpd.fbwifi_redirect.home='/dev/null'
-	uci set uhttpd.fbwifi_redirect.json_script='/tmp/fbwifi/uhttpd-redirect.json'
-	uci set uhttpd.fbwifi_redirect.key='/tmp/fbwifi/https_server_key'
-	uci set uhttpd.fbwifi_redirect.listen_http='0.0.0.0:2060'
-	uci set uhttpd.fbwifi_redirect.listen_https='0.0.0.0:2061'
-
-	uci set uhttpd.main.cert='/tmp/fbwifi/https_server_cert'
-	uci set uhttpd.main.json_script='/usr/share/fbwifi/uhttpd.json'
-	uci set uhttpd.main.key='/tmp/fbwifi/https_server_key'
-	uci set uhttpd.main.rfc1918_filter=0
-	;;
-reload)
-	/usr/sbin/fbwifi_get_config
-
-	login_url=$(uci -c /var/state get fbwifi.main.captive_portal_url)
-	[ -z "$login_url" ] && {
-		logger -t fbwifi "captive_portal_url not available yet"
-		exit 1
-	}
-	printf '{ "request": [ ["redirect", "%s", 302] ] }' "$login_url" > /tmp/fbwifi/uhttpd-redirect.json
-
-	/etc/init.d/uhttpd restart
-
-	exit 0
-	;;
-esac
-
-uci commit
-/etc/init.d/uhttpd restart
-reload_config

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_debug_dump

@@ -1,8 +0,0 @@
-echo -e "Runtime configuration and token DB\n"
-uci -c /var/state export fbwifi
-
-echo -e "\nDynamic firewall flow rules\n"
-iptables -t mangle -L FBWIFI_CLIENT_TO_INTERNET
-
-echo -e "\nDHCP leases\n"
-cat /tmp/dhcp.leases

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_gateway_info_update

@@ -1,39 +0,0 @@
-#!/usr/bin/lua
-
-http = require("ssl.https")
-json = require("cjson")
-log = require("posix.syslog")
-socket = require("socket")
-require("uci")
-fbwifi = require("fbwifi")
-
-GATEWAY_TOKEN = fbwifi.gateway_token()
-state = uci.cursor("/var/state", "/tmp/fbwifi")
-
-payload="name="..socket.dns.gethostname()
-
-function queue_ssid_update(iface)
-	bssid_file="/sys/class/net/br-"..iface["network"].."/address"
-	local file = io.open(bssid_file)
-        if file then
-            for line in file:lines() do
-		payload=payload.."&bssid[]="..line
-            end
-	    file:close()
-	    payload=payload.."ssid[]="..iface["ssid"]
-        else
-	    log.syslog(log.LOG_WARNING, "[fbwifi] Failed to find BSSID for interface br-"..iface["network"])
-        end
-end
-
-state:foreach("wireless", "wifi-iface", queue_ssid_update)
-
-URL="https://api.fbwifi.com/v2.0/gateway"
-body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN, payload)
-if code == 200 then 
-	log.syslog(log.LOG_INFO, "[fbwifi] gateway information updated "..body)
-	os.exit(0)
-else
-	log.syslog(log.LOG_WARNING, "[fbwifi] gateway API failed "..body)
-	os.exit(code)
-end

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_get_config

@@ -1,111 +0,0 @@
-#!/usr/bin/lua
-http = require("ssl.https")
-json = require("cjson")
-require("uci")
-log = require("posix.syslog")
-fbwifi = require("fbwifi")
-
-GATEWAY_TOKEN = fbwifi.gateway_token()
-
-http_port = uci.get("fbwifi.main.http_port")
-https_port = uci.get("fbwifi.main.https_port")
-
-statefile = assert(io.open("/var/state/fbwifi", "a"), "could not create state file")
-statefile:close()
-
-state = uci.cursor("/var/state", "/tmp/fbwifi")
-
-URL="https://api.fbwifi.com/v2.0/gateway"
-body, code, headers = http.request(URL.."?access_token="..GATEWAY_TOKEN.."&fields=config,config_version")
-
-if code == 200 then
-	log.syslog(log.LOG_INFO, "[fbwifi] Got gateway config ("..code..")")
-else
-	log.syslog(log.LOG_CRIT, "[fbwifi] Failed to get gateway config ("..code..")")
-	os.exit(1)
-end
-
-obj = json.decode(body)
-
-function save_cert(name, value)
-	log.syslog(log.LOG_INFO, "[fbwifi] Saving cert "..name)
-	local f = assert(io.open("/tmp/fbwifi/"..name, "w"))
-	f:write(value)
-	f:close()
-end
-
-function process_redirect(ix, host)
-	IP_SET = "ip addr replace dev lo "..host
-	local result = os.execute(IP_SET)
-	if result == 0 then
-		log.syslog(log.LOG_INFO, "[fbwifi] Redirect address applied "..host)
-	else
-		log.syslog(log.LOG_WARNING, "[fbwifi] Failed to apply redirect address "..host)
-	end
-
-	ip = string.match(host, '([0-9\.]*)/([0-9]*)')
-	RULE_FMT="grep -q \"%s\" /etc/hosts || echo \"%s\tstar.fbwifigateway.net\" >> /etc/hosts"
-	HOSTS_RULE = string.format(RULE_FMT, ip, ip)
-	result = os.execute(HOSTS_RULE)
-	if result == 0 then
-		log.syslog(log.LOG_INFO, "[fbwifi] Cached redirect host for DNS")
-	else
-		log.syslog(log.LOG_WARNING, "[fbwifi] Failed to amend /etc/hosts")
-		log.syslog(log.LOG_INFO, "[fbwifi] "..HOSTS_RULE)
-	end
-
-	result = os.execute("iptables -t nat -A FBWIFI_HOST_REDIRLIST -p tcp --dport 80 -d "..ip.." -j ACCEPT # REDIRECT --to-ports "..http_port)
-	--print(result)
-	result = os.execute("iptables -t nat -A FBWIFI_HOST_REDIRLIST -p tcp --dport 443 -d "..ip.."  -j ACCEPT # REDIRECT --to-ports "..https_port)
-	--print(result)
-end
-
-save_cert("https_server_cert", obj['config']['https_server_cert'])
-save_cert("https_server_key", obj['config']['https_server_key'])
-
-result = os.execute("iptables -t nat -F FBWIFI_HOST_REDIRLIST")
---print(result)
-table.foreach(obj['config']['host_redirect_ips'], process_redirect)
-
-RULE_FORMAT = "iptables -t mangle -A FBWIFI_TRAFFIC_ALLOWLIST -d %s -p %s --dport %s -j MARK --set-mark 0xfb"
-function process_traffic_rule(ix, rule)
-	log.syslog(log.LOG_INFO, "[fbwifi] Traffic rule "..ix)
-	
-	if rule["protocol"] == 6 then
-		PROTO = "tcp"
-	elseif rule["protocol"] == 17 then
-		PROTO = "udp"
-	end
-	RULE = string.format(RULE_FORMAT, rule["ip"], PROTO, rule["port"])
-	local result = os.execute(RULE)
-	if result == 0 then
-		log.syslog(log.LOG_INFO, "[fbwifi] Traffic rule "..ix)
-	else
-		log.syslog(log.LOG_WARNING, "[fbwifi] Failed to install traffic rule ; "..RULE)
-	end
-end
-
-local cross_origin_list = {}
-function process_cross_origin_rule(ix, url)
-	log.syslog(log.LOG_INFO, "[fbwifi] Cross origin rule "..url)
-	table.insert(cross_origin_list, url)
-end
-
-function process_url(url_purpose, fqdn)
-	log.syslog(log.LOG_INFO, "[fbwifi] Caching "..url_purpose)
-	state:set("fbwifi", "main", url_purpose, fqdn)	
-end
-
-state:set("fbwifi", "main", "config")
-
-result = os.execute("iptables -t mangle -F FBWIFI_TRAFFIC_ALLOWLIST ")
---print(result)
-table.foreach(obj['config']['traffic_allowlist'], process_traffic_rule)
-table.foreach(obj['config']['cross_origin_allowlist'], process_cross_origin_rule)
-table.foreach(obj['config']['urls'], process_url)
-
-state:set("fbwifi", "main", "cross_origin_allow_rules", cross_origin_list)
-state:set("fbwifi", "main", "config_version", obj['config_version'])
-
-state:save('fbwifi')
-state:commit('fbwifi')

feeds/facebook/fbwifi/files/fbwifi/usr/sbin/fbwifi_validate_token_db

@@ -1,75 +0,0 @@
-#!/usr/bin/lua
-
-https = require("ssl.https")
-json = require("cjson")
-log = require("posix.syslog")
-fbwifi = require("fbwifi")
-require("uci")
-
-state = uci.cursor("/var/state", "/tmp/fbwifi")
-GATEWAY_TOKEN = fbwifi.gateway_token()
-
-request = { 
-	tokens = {}, 
-	traffic_type = "total",
-	config_version = state:get("fbwifi", "main", "config_version")
-}
-
-function queue_token(client)
-
-	request.tokens[client.token]={
-		incoming = json.null,
-		outgoing = json.null,
-		connected_time_sec = json.null,
-		inactive_time_sec = json.null,
-		signal_rssi_dbm = json.null,
-		--expected_tpus_mbps = json.null,
-		is_connected = true
-	}
-
-end
-
-state:foreach("fbwifi", "client", queue_token)
-print( "\nRequest:\n"..json.encode(request) )
-
-URL="https://api.fbwifi.com/v2.0/tokens"
-BODY=string.format(
-	"tokens=%s&traffic_type=%s&config_version=%s",
-	json.encode(request.tokens),
-	"total",
-	state:get("fbwifi", "main", "config_version")
-)
-
-body, code, headers = https.request(URL.."?access_token="..GATEWAY_TOKEN, BODY)
-
-if code then
-	print( "\nResponse:\n"..body )
-end
-
-response = json.decode(body)
---print(response)
---table.foreach(response,print)
---table.foreach(response.tokens,print)
-
-if response.config_valid then
-	log.syslog(log.LOG_INFO, "[fbwifi] Config validated")
-else
-	log.syslog(log.LOG_WARNING, "[fbwifi] config is stale, refreshing config")
-        local result = os.execute("/usr/sbin/fbwifi reload")
-        if result == 0 then
-                log.syslog(log.LOG_INFO, "[fbwifi] successfully fetched and loaded new config ")
-        else
-                log.syslog(log.LOG_WARNING, "[fbwifi] failed to fetch and load new config, possible stale config")
-        end
-end
-
-function process_token(token, metadata)
-	table.foreach(metadata,print)
-	if metadata.valid then
-		print("OK: "..token)	
-	else
-		print("Nok: "..token)	
-		fbwifi.revoke_client_rule( token )
-	end
-end
-table.foreach(response.tokens,process_token)

feeds/facebook/fbwifi/files/fbwifi/usr/share/fbwifi/firewall.include

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-# SPDX-License-Identifier: GPL-2.0-only
-# Copyright (c) Facebook, Inc. and its affiliates.
-
-IPT4="/usr/sbin/iptables"
-
-set -- --wait 1 --wait-interval 100
-
-fbwifi_http_port="$(uci get fbwifi.main.http_port)"
-[ -n "$fbwifi_http_port" ] || {
-	logger -t fbwifi "required option http_port not set"
-	exit 1
-}
-
-fbwifi_https_port="$(uci get fbwifi.main.https_port)"
-[ -n "$fbwifi_https_port" ] || {
-	logger -t fbwifi "required option https_port not set"
-	exit 1
-}
-
-fbwifi_zone="$(uci get fbwifi.main.zone)"
-[ -n "$fbwifi_zone" ] || {
-	logger -t fbwifi "required option zone  not set"
-	exit 1
-}
-
-fbwifi_ifaces="$(fw3 -q zone "$fbwifi_zone")"
-
-## Create custom chains
-"$IPT4" "$@" -t filter -N FBWIFI_FORWARD 2>/dev/null
-"$IPT4" "$@" -t filter -N FBWIFI_INPUT 2>/dev/null
-"$IPT4" "$@" -t mangle -N FBWIFI_CLIENT_TO_INTERNET 2>/dev/null
-"$IPT4" "$@" -t mangle -N FBWIFI_PREROUTING 2>/dev/null
-"$IPT4" "$@" -t mangle -N FBWIFI_TRAFFIC_ALLOWLIST 2>/dev/null
-"$IPT4" "$@" -t nat -N FBWIFI_CLIENT_TO_INTERNET 2>/dev/null
-"$IPT4" "$@" -t nat -N FBWIFI_PREROUTING 2>/dev/null
-"$IPT4" "$@" -t nat -N FBWIFI_HOST_REDIRLIST 2>/dev/null
-
-## Flush custom chains
-"$IPT4" "$@" -t filter -F FBWIFI_FORWARD
-"$IPT4" "$@" -t filter -F FBWIFI_INPUT
-"$IPT4" "$@" -t mangle -F FBWIFI_CLIENT_TO_INTERNET
-"$IPT4" "$@" -t mangle -F FBWIFI_PREROUTING
-"$IPT4" "$@" -t mangle -F FBWIFI_TRAFFIC_ALLOWLIST
-"$IPT4" "$@" -t nat -F FBWIFI_CLIENT_TO_INTERNET
-"$IPT4" "$@" -t nat -F FBWIFI_PREROUTING
-"$IPT4" "$@" -t nat -F FBWIFI_HOST_REDIRLIST
-
-## Populate custom chains
-"$IPT4" "$@" -t filter -A FBWIFI_FORWARD -p udp --dport 53 -m conntrack --ctstate NEW -j ACCEPT
-"$IPT4" "$@" -t filter -A FBWIFI_FORWARD -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
-"$IPT4" "$@" -t filter -A FBWIFI_FORWARD -j REJECT
-"$IPT4" "$@" -t filter -A FBWIFI_INPUT -p tcp --dport "$fbwifi_http_port" -m conntrack --ctstate NEW -j ACCEPT
-"$IPT4" "$@" -t filter -A FBWIFI_INPUT -p tcp --dport "$fbwifi_https_port"  -m conntrack --ctstate NEW -j ACCEPT
-"$IPT4" "$@" -t filter -A FBWIFI_INPUT -p tcp --dport 443 -m conntrack --ctstate NEW -j ACCEPT
-"$IPT4" "$@" -t mangle -A FBWIFI_PREROUTING -j FBWIFI_CLIENT_TO_INTERNET
-"$IPT4" "$@" -t mangle -A FBWIFI_PREROUTING -j FBWIFI_TRAFFIC_ALLOWLIST
-"$IPT4" "$@" -t nat -A FBWIFI_PREROUTING -j FBWIFI_CLIENT_TO_INTERNET
-"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 80 -m conntrack --ctstate NEW -j FBWIFI_HOST_REDIRLIST
-"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 443 -m conntrack --ctstate NEW -j FBWIFI_HOST_REDIRLIST
-"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p udp --dport 443 -m conntrack --ctstate NEW -j FBWIFI_HOST_REDIRLIST
-"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 80 -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
-"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 443 -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
-"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p udp --dport 443 -m conntrack --ctstate NEW -m mark --mark 0xfb -j ACCEPT
-"$IPT4" "$@" -t nat -A FBWIFI_CLIENT_TO_INTERNET -p tcp --dport 80 -m conntrack --ctstate NEW -j REDIRECT --to-ports "$fbwifi_http_port"
-
-## Hook custom chains in firewall3 chains
-"$IPT4" "$@" -t filter -I "zone_${fbwifi_zone}_input" 2 -j FBWIFI_INPUT
-"$IPT4" "$@" -t filter -I "zone_${fbwifi_zone}_forward" 2 -j FBWIFI_FORWARD
-"$IPT4" "$@" -t nat -I "zone_${fbwifi_zone}_prerouting" 2 -j FBWIFI_PREROUTING
-# There are no firewall3 zone chains in the mangle table so we need to do this for all interfaces in the zone
-for iface in $fbwifi_ifaces; do
-	"$IPT4" "$@" -t mangle -I PREROUTING -i "$iface" -j FBWIFI_PREROUTING
-done

feeds/facebook/fbwifi/files/fbwifi/usr/share/fbwifi/uhttpd.json

@@ -1,8 +0,0 @@
-{
-  "request": [
-    [ "if",
-      [ "regex", "REQUEST_URI", "^/fbwifi" ],
-      [ "rewrite", "/cgi-bin%REQUEST_URI%" ]
-    ]
-  ]
-}

feeds/facebook/fbwifi/files/fbwifi/www/cgi-bin/fbwifi/v2.0/auth

@@ -1,70 +0,0 @@
-#!/usr/bin/lua
-require("uci")
-log = require("posix.syslog")
-fbwifi = require("fbwifi")
-
-state = uci.cursor("/var/state", "/tmp/fbwifi")
-function process_cors()
-	origin = os.getenv("HTTP_ORIGIN")
-	log.syslog(log.LOG_INFO, string.format("[fbwifi] [auth] process_cors origin %s", origin or 'not found') )
-	if string.len(origin or '') > 0 then
-		allow_list = state:get("fbwifi", "main", "cross_origin_allow_rules")
-		for _, value in pairs(allow_list) do
-    			if value == origin then
-				log.syslog(log.LOG_INFO, "[fbwifi] [auth] process_cors Appending CORS Headers to HTTP")
-				print("Access-Control-Allow-Origin: "..origin)
-				print("Vary: Origin")
-				break
-			end
-		end
-	else	
-		log.syslog(log.LOG_INFO, "[fbwifi] [auth] process_cors No CORS Headers added to Response")
-	end
-end
-
-method = os.getenv("REQUEST_METHOD")
-if method == 'GET' then
-	log.syslog(log.LOG_INFO, "[fbwifi] [auth] GET handler")
-	print("Status: 302 Found")
-	print("Location: "..state:get("fbwifi", "main", "landing_page_url"))
-	process_cors()
-	print ('\n')
-
-elseif method == 'POST' then
-	local token
-	
-	log.syslog(log.LOG_INFO, "[fbwifi] [auth] POST handler")
-	process_cors()
-	print("Status: 200 OK")
-
-	form_data=io.read()
-	while form_data do
-		token = string.match(form_data, '[%d]+')
-		if string.len(token or '') > 14 then
-
-			client = os.getenv("REMOTE_ADDR")
-			f = io.popen("awk '/"..client..".*0x2/ { printf(\"%s\", $4) }' /proc/net/arp", 'r')
-			client_mac = assert(f:read('*a'))
-			f:close()
-
-			if fbwifi.validate_token(token) then
-                                log.syslog(log.LOG_INFO, string.format( "[fbwifi] [auth] POST handler : Validating Token (%s) for MAC (%s)", token or 'nil', client_mac or 'nil') )
-				fbwifi.instate_client_rule(token, client_mac)
-				print("\n{\"valid\":true}\n")
-			else
-                                log.syslog(log.LOG_WARNING, string.format( "[fbwifi] [auth] POST handler : ! Invalid token (%s) for mac (%s) !", token or 'nil', client_mac or 'nil') )
-				fbwifi.revoke_client_rule(token)
-				print("\n{\"valid\":false}\n")
-			end
-			log.syslog(log.LOG_INFO, "[fbwifi] [auth] POST handler completed")
-			return
-		end
-
-		form_data=io.read()
-	end
-	print ('\n')
-
-	log.syslog(log.LOG_WARNING, string.format("[fbwifi] [auth] POST handler : token not found" ))
-	fbwifi.revoke_client_rule(token)
-	print("\n{\"valid\":false}\n")
-end

feeds/facebook/fbwifi/files/fbwifi/www/cgi-bin/fbwifi/v2.0/capport

@@ -1,42 +0,0 @@
-#!/usr/bin/lua
-json = require("cjson")
-require("uci")
-
-state = uci.cursor("/var/state", "/tmp/fbwifi")
-client_mac = ""
-token = ""
-
-response = {}
-response['venue-info-url'] = state:get("fbwifi", "main", "capport_venue_info_url")
-
-function map_remote_mac_to_token(client)
-        for key, value in pairs(client) do
-                if
-                        key == 'mac' and
-                        value == client_mac
-                then
-			token = client.token
-                        return false
-                end
-        end
-end
-
-function hasValidToken(client_ip)
-	f = io.popen("awk '/"..client_ip..".*0x2/ { printf(\"%s\", $4) }' /proc/net/arp", 'r')
-	client_mac = assert(f:read('*a'))
-	f:close()
-	state:foreach("fbwifi", "client", map_remote_mac_to_token)
-
-	return 0 < string.len(token)
-end
-
-print("Content-type: application/captive+json; charset=utf-8\n")
-
-client = os.getenv("REMOTE_ADDR")
-response['captive'] = not hasValidToken(client)
-
-if response['captive'] then
-	response['user-portal-url'] = state:get("fbwifi", "main", "captive_portal_url")
-end
-
-print( json.encode(response) )

feeds/facebook/fbwifi/files/fbwifi/www/cgi-bin/fbwifi/v2.0/info

@@ -1,57 +0,0 @@
-#!/usr/bin/lua
-json = require("cjson")
-fbwifi = require("fbwifi")
-
-state = uci.cursor("/var/state", "/tmp/fbwifi")
-GATEWAY_TOKEN = fbwifi.gateway_token()
-
-response = { api_version = "2.0", token = json.null }
-client_mac = ""
-
-function process_cors()
-        origin = os.getenv("HTTP_ORIGIN")
-        if string.len(origin or '') > 0 then
-                allow_list = state:get("fbwifi", "main", "cross_origin_allow_rules")
-                for _, value in pairs(allow_list) do
-                        if value == origin then
-                                print("Access-Control-Allow-Origin: "..origin)
-                                print("Vary: Origin")
-                                break
-                        end
-                end
-        end
-end
-
-function map_remote_mac_to_token(client)
-
-	for key, value in pairs(client) do
-		if
-			key == 'mac' and
-			value == client_mac
-		then
-			response.token = client.token
-			return false -- escape outer loop
-		end
-	end
-end
-
-function getClientToken(client_ip)
-	f = io.popen("awk '/"..client_ip..".*0x2/ { printf(\"%s\", $4) }' /proc/net/arp", 'r')
-	client_mac = assert(f:read('*a'))
-	f:close()
-
-	state:foreach("fbwifi", "client", map_remote_mac_to_token)
-end
-
-function getGatewayId()
-	id = string.match(GATEWAY_TOKEN, 'FBWIFI:GATEWAY|[0-9]*|([0-9]*)')
-	return id
-end
-
-process_cors()
-print("Content-type: application/json; charset=utf-8\n")
-
-getClientToken(os.getenv("REMOTE_ADDR"))
-response.gateway_id = getGatewayId()
-
-print( json.encode(response) )

feeds/facebook/fbwifi/files/luci-app-fbwifi/usr/lib/lua/luci/controller/fbwifi.lua

@@ -1,12 +0,0 @@
--- SPDX-License-Identifier: GPL-2.0-only
--- Copyright (c) Facebook, Inc. and its affiliates.
-
-module("luci.controller.fbwifi", package.seeall)
-
-sys = require "luci.sys"
-ut = require "luci.util"
-
-function index()
-    entry({"admin", "network", "fbwifi"}, template("fbwifi"), "Facebook Wi-Fi", 90).dependent=false
-end
-

feeds/facebook/fbwifi/files/luci-app-fbwifi/usr/lib/lua/luci/view/fbwifi.htm

@@ -1,16 +0,0 @@
-<%#
- Copyright
- Licensed to the public under the GNU General Public License v2.
--%>
-
-<%+header%>
-
-<h1>Facebook Wi-Fi</h1>
-<%
-	require("uci")
-	state = uci.cursor("/var/state", "/tmp/fbwifi")
-	url = state:get("fbwifi", "main", "captive_portal_config_url")
-%>
-<a href="<% print(url) %>">Configure FB business page</a>
-
-<%+footer%>

feeds/ipq807x/ipq807x/base-files/etc/board.d/01_leds

@@ -34,11 +34,27 @@ edgecore,eap104)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
 	ucidef_set_led_netdev "wan" "wan" "yellow:uplink" "eth0"
 	;;
+liteon,wpx8324)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "orange:wifi2" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	ucidef_set_led_netdev "wan" "wan" "blue:uplink" "eth0"
+	;;
 hfcl,ion4xi|\
+hfcl,ion4x|\
+hfcl,ion4x_2|\
 hfcl,ion4xe)
         ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wifi5" "phy0tpt"
         ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wifi2" "phy1tpt"
 	;;
+glinet,ax1800|\
+glinet,axt1800)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" "tx rx link"
+	;;
+yuncore,fap650|\
+muxi,ap3220l)
+        ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wifi2" "phy0tpt"
+        ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wifi5" "phy1tpt"
+	;;
 esac
 
 board_config_flush

feeds/ipq807x/ipq807x/base-files/etc/board.d/02_network

@@ -13,6 +13,8 @@ qcom_setup_interfaces()
 
 	case $board in
 	hfcl,ion4xi|\
+	hfcl,ion4x|\
+	hfcl,ion4x_2|\
 	hfcl,ion4xe)
 		ucidef_set_interface_wan "eth0 eth1"
 		ucidef_set_interface_lan ""
@@ -31,28 +33,47 @@ qcom_setup_interfaces()
 	cig,wf194c|\
 	cig,wf194c4|\
 	edgecore,eap106|\
+	indio,um-310ax-v1|\
+	indio,um-510axp-v1|\
+	indio,um-510axm-v1|\
 	qcom,ipq5018-mp03.3|\
-	sercomm,wallaby)
+	yuncore,ax840|\
+	motorola,q14|\
+	sercomm,wallaby|\
+	plasmacloud,pax1800-v1|\
+	plasmacloud,pax1800-v2)
 		ucidef_set_interface_lan "eth0"
 		ucidef_set_interface_wan "eth1"
 		;;
-	edgecore,eap101)
+	edgecore,eap101|\
+	glinet,axt1800)
 		ucidef_set_interface_lan "eth1 eth2"
 		ucidef_set_interface_wan "eth0"
 		;;
 	edgecore,eap102|\
-	edgecore,eap104|\
+	liteon,wpx8324|\
 	wallys,dr6018|\
 	cig,wf188n|\
-	cig,wf196)
+	cig,wf196|\
+	muxi,ap3220l)
 		ucidef_set_interface_lan "eth1"
 		ucidef_set_interface_wan "eth0"
 		;;
+       cig,wf660a)
+                ucidef_set_interface_lan "eth0"		
+		;;
+	yuncore,fap650)
+		ucidef_set_interface_lan "eth3 eth2 eth1 eth0"
+		ucidef_set_interface_wan "eth4"
+		;;
 	qcom,ipq807x-hk14)
 		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 		ucidef_set_interface_wan "eth4"
 		;;
-	wallys,dr6018-v4)
+	wallys,dr6018-v4|\
+	glinet,ax1800|\
+	meshpp,s618-cp03|\
+	meshpp,s618-cp01)
 		ucidef_set_interface_lan "eth1 eth2 eth3 eth4"
 		ucidef_set_interface_wan "eth0"
 		;;
@@ -64,6 +85,12 @@ qcom_setup_interfaces()
 		ucidef_add_switch_attr "switch1" "enable" "false"
 		ucidef_add_switch_attr "switch1" "reset" "true"
 		;;
+	edgecore,eap104)
+		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch1" \
+			"6@eth1" "1:lan1" "2:lan2" "3:lan3" "4:lan4"
+		;;
 	esac
 }
 
@@ -72,15 +99,62 @@ qcom_setup_macs()
 	local board="$1"
 
 	case $board in
+	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4)
-		mac=$(grep BaseMacAddress= /dev/mtd14 | cut -dx -f2)
+		mtd=$(find_mtd_chardev "0:APPSBLENV")
+		[ -z "$mtd" ] && return;
+		mac=$(grep BaseMacAddress= $mtd | cut -dx -f2)
+		[ -z "$mac" ] && return;
 		wan_mac=$(macaddr_canonicalize $mac)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		ucidef_set_network_device_mac eth0 $lan_mac
 		ucidef_set_network_device_mac eth1 $wan_mac
+		ip link set eth0 address $lan_mac
+		ip link set eth1 address $wan_mac
 		ucidef_set_label_macaddr $wan_mac
 		;;
+	cig,wf196)
+		mtd=$(find_mtd_chardev "0:APPSBLENV")
+		[ -z "$mtd" ] && return;
+		mac=$(grep BaseMacAddress= $mtd | cut -dx -f2)
+		[ -z "$mac" ] && return;
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
+		ucidef_set_label_macaddr $wan_mac
+		;;
+	cybertan,eww622-a1)
+	        mac=$(grep -i -m 1 mac_addr_base= /dev/`cat /proc/mtd | grep devinfo | cut -d: -f1` | cut -d= -f2)
+	        [ -z "$mac"] && mac="00:11:22:33:44:55"
+		wan_mac=$(macaddr_canonicalize $mac)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ucidef_set_label_macaddr $wan_mac
+		;;
+	indio,um-310ax-v1|\
+	indio,um-510axp-v1|\
+	indio,um-510axm-v1|\
+	yuncore,ax840)
+		wan_mac=$(cat /sys/class/net/eth1/address)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	yuncore,fap650)
+		wan_mac=$(cat /sys/class/net/eth4/address)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	muxi,ap3220l)
+		wan_mac=$(mtd_get_mac_binary 0:Product_Info 0x5b)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		ucidef_set_network_device_mac eth0 $wan_mac
+		ucidef_set_network_device_mac eth1 $lan_mac
+		ip link set eth0 address $wan_mac
+		ip link set eth1 address $lan_mac
+		;;
 	*)
 		wan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -88,6 +162,7 @@ qcom_setup_macs()
 	esac
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
 	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$wan_mac" ] && ucidef_set_label_macaddr "$wan_mac"
 }
 
 board_config_update

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/firmware/10-ath11k-caldata

@@ -49,6 +49,15 @@ ath11k_generate_macs_ion4x() {
 	echo -ne \\x${wifimac2//:/\\x} >> /lib/firmware/ath11k-macs
 }
 
+ath11k_generate_macs_pax1800() {
+	touch /lib/firmware/ath11k-macs
+	eth=$(cat /sys/class/net/eth0/address)
+	mac1=$(macaddr_add $eth 10)
+	mac2=$(macaddr_add $eth 2)
+	echo -ne \\x${mac1//:/\\x} >> /lib/firmware/ath11k-macs
+	echo -ne \\x${mac2//:/\\x} >> /lib/firmware/ath11k-macs
+}
+
 caldata_die() {
         echo "caldata: " "$*"
         exit 1
@@ -61,6 +70,9 @@ caldata_extract() {
         local mtd
 
         mtd=$(find_mtd_chardev $part)
+        if [ -z "$mtd" ]; then                                 
+                mtd=/dev/$(echo $(find_mmc_part $part) | sed 's/^.\{5\}//')
+        fi                	
         [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
 
         dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
@@ -77,6 +89,9 @@ case "$FIRMWARE" in
 	cig,wf196|\
 	edgecore,eap102 |\
 	edgecore,eap106 |\
+	indio,um-310ax-v1|\
+	indio,um-510axp-v1|\
+	indio,um-510axm-v1|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	tplink,ex227|\
@@ -90,13 +105,24 @@ case "$FIRMWARE" in
 	case "$board" in
 	cig,wf188|\
 	cig,wf188n|\
+	cig,wf660a|\
 	edgecore,eap101|\
 	hfcl,ion4xi|\
+	hfcl,ion4x_2|\
+	hfcl,ion4x|\
 	hfcl,ion4xe|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
+	meshpp,ipq6018-cp01|\
+	meshpp,ipq6018-cp03|\
+	qcom,ipq6018-cp03|\
 	qcom,ipq6018-cp01|\
-	xiaomi,ax1800)
+	xiaomi,ax1800|\
+	glinet,ax1800|\
+	yuncore,ax840|\
+	yuncore,fap650|\
+	plasmacloud,pax1800-v1|\
+	plasmacloud,pax1800-v2)
                 caldata_extract "0:ART" 0x1000 0x20000  
 		;;
 	esac
@@ -105,21 +131,37 @@ ath11k/IPQ5018/hw1.0/caldata.bin)
 	case "$board" in
 	cybertan,eww622-a1|\
 	edgecore,eap104|\
+	liteon,wpx8324|\
+	motorola,q14|\
+	muxi,ap3220l|\
 	qcom,ipq5018-mp03.1)
                 caldata_extract "0:ART" 0x1000 0x20000  
 		;;
 	esac
 	;;
+ath11k/qcn6122/hw1.0/caldata_1.bin)
+	case "$board" in
+	motorola,q14)
+                caldata_extract "0:ART" 0x26800 0x20000  
+		;;
+	esac
+	;;
 ath11k/qcn6122/hw1.0/caldata_2.bin)
 	case "$board" in
-	edgecore,eap104)
+	motorola,q14|\
+	edgecore,eap104|\
+	liteon,wpx8324)
                 caldata_extract "0:ART" 0x4c000 0x20000  
 		;;
+	muxi,ap3220l)
+		caldata_extract "0:ART" 0x26800 0x20000
+		;;
 	esac
 	;;
 ath11k/QCN9074/hw1.0/caldata_1.bin)
 	case "$board" in
 	cig,wf196|\
+	wallys,dr6018-v4|\
 	cybertan,eww622-a1|\
 	qcom,ipq5018-mp03.1|\
 	qcom,ipq807x-hk14)
@@ -138,21 +180,34 @@ ath11k/QCN9074/hw1.0/caldata_2.bin)
 ath11k-macs)
 	case "$board" in
 	hfcl,ion4xi|\
+	hfcl,ion4x|\
+	hfcl,ion4x_2|\
 	hfcl,ion4xe)                                               
 		ath11k_generate_macs_ion4x
 		;;
 	edgecore,eap101)
 		ath11k_generate_macs_eap101
 		;;
+	yuncore,ax840|\
 	edgecore,eap102|\
+	edgecore,eap104|\
 	edgecore,eap106|\
+	indio,um-310ax-v1|\
+	indio,um-510axp-v1|\
+	indio,um-510axm-v1|\
+	cig,wf660a|\
 	cig,wf188n)
 		ath11k_generate_macs
 		;;
 	cig,wf194c|\
-	cig,wf194c)
+	cig,wf194c4|\
+	cig,wf196)
 		ath11k_generate_macs_wf194
 		;;
+	plasmacloud,pax1800-v1|\
+	plasmacloud,pax1800-v2)
+		ath11k_generate_macs_pax1800
+		;;
 	esac
 	;;
 *)

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/net/20-smp-tune

@@ -1,67 +0,0 @@
-#!/bin/sh
-[ "$ACTION" = add ] || exit
-
-NPROCS="$(grep -c "^processor.*:" /proc/cpuinfo)"
-[ "$NPROCS" -gt 1 ] || exit
-
-PROC_MASK="$(( (1 << $NPROCS) - 1 ))"
-
-find_irq_cpu() {
-	local dev="$1"
-	local match="$(grep -m 1 "$dev\$" /proc/interrupts)"
-	local cpu=0
-
-	[ -n "$match" ] && {
-		set -- $match
-		shift
-		for cur in `seq 1 $NPROCS`; do
-			[ "$1" -gt 0 ] && {
-				cpu=$(($cur - 1))
-				break
-			}
-			shift
-		done
-	}
-
-	echo "$cpu"
-}
-
-set_hex_val() {
-	local file="$1"
-	local val="$2"
-	val="$(printf %x "$val")"
-	[ -n "$DEBUG" ] && echo "$file = $val"
-	echo "$val" > "$file"
-}
-
-default_ps="$(uci get "network.@globals[0].default_ps")"
-[ -n "$default_ps" -a "$default_ps" != 1 ] && exit 0
-
-exec 512>/var/lock/smp_tune.lock
-flock 512 || exit 1
-
-for dev in /sys/class/net/*; do
-	[ -d "$dev" ] || continue
-
-	# ignore virtual interfaces
-	[ -n "$(ls "${dev}/" | grep '^lower_')" ] && continue
-	[ -d "${dev}/device" ] || continue
-
-	device="$(readlink "${dev}/device")"
-	device="$(basename "$device")"
-	irq_cpu="$(find_irq_cpu "$device")"
-	irq_cpu_mask="$((1 << $irq_cpu))"
-
-	for q in ${dev}/queues/rx-*; do
-		set_hex_val "$q/rps_cpus" "$(($PROC_MASK & ~$irq_cpu_mask))"
-	done
-
-	ntxq="$(ls -d ${dev}/queues/tx-* | wc -l)"
-
-	idx=$(($irq_cpu + 1))
-	for q in ${dev}/queues/tx-*; do
-		set_hex_val "$q/xps_cpus" "$((1 << $idx))"
-		let "idx = idx + 1"
-		[ "$idx" -ge "$NPROCS" ] && idx=0
-	done
-done

feeds/ipq807x/ipq807x/base-files/etc/hotplug.d/net/macs

@@ -1,3 +1,3 @@
 #!/bin/sh
-mac=$(cat /etc/board.json | jsonfilter -e '@["network-device"]["'$DEVICENAME'"]'.macaddr)
+mac=$(cat /etc/board.json | jsonfilter -e '@["network_device"]["'$DEVICENAME'"]'.macaddr)
 [ -n "$mac" ] && ip link set $DEVICENAME address $mac

feeds/ipq807x/ipq807x/base-files/etc/init.d/aq_phy

@@ -19,4 +19,12 @@ boot() {
 		ssdk_sh debug phy set 8 0x4004c441 0x8
 		;;
 	esac
+
+	case "$(board_name)" in
+	cig,wf196)
+		# setup the leds
+		ssdk_sh debug phy set 0 0x401ec431 0xc00f
+		ssdk_sh debug phy set 0 0x401ec430 0x806f
+		;;
+	esac
 }

feeds/ipq807x/ipq807x/base-files/etc/init.d/bootcount

@@ -4,8 +4,14 @@ START=99
 
 boot() {
 	case "$(board_name)" in
+	hfcl,ion4xe|\
+	hfcl,ion4xi)
+		fw_setenv boot_count 0
+		;;		
 	edgecore,eap101|\
 	edgecore,eap102)
+		avail=$(fw_printenv -n upgrade_available)
+		[ "${avail}" -eq 1 ] || fw_setenv upgrade_available 1
 		fw_setenv bootcount 0
 		;;
 	esac

feeds/ipq807x/ipq807x/base-files/etc/init.d/smp

@@ -1,58 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-
-set_affinity() {
-	local affinity=$1
-	local name=$2
-	local irq=`grep -E -m1 $name /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-        [ -n "$irq" ] && {
-		logger ath11k setting affinity for $name/$irq to $affinity
-		echo $affinity > /proc/irq/$irq/smp_affinity
-	}
-}
-
-boot() {
-	. /lib/functions/system.sh
-
-	board=$(board_name)
-	case $board in
-	cig,wf196)
-		set_affinity 1 reo2host-destination-ring2
-		set_affinity 2 reo2host-destination-ring1
-		;;
-	*)
-		set_affinity 2 reo2host-destination-ring2
-		set_affinity 1 reo2host-destination-ring1
-		;;
-	esac
-
-	case $board in
-	maple)
-		;;
-	*)
-		set_affinity 8 reo2host-destination-ring4
-		set_affinity 4 reo2host-destination-ring3
-	
-		set_affinity 8 wbm2host-tx-completions-ring3
-		set_affinity 4 wbm2host-tx-completions-ring2
-		set_affinity 2 wbm2host-tx-completions-ring1
-
-		set_affinity 8 ppdu-end-interrupts-mac1
-		set_affinity 8 rxdma2host-monitor-status-ring-mac1
-		set_affinity 8 rxdma2host-monitor-destination-mac1
-		set_affinity 8 host2rxdma-monitor-ring1
-		;;
-	esac
-
-	set_affinity 4 ppdu-end-interrupts-mac2
-	set_affinity 4 rxdma2host-monitor-status-ring-mac2
-	set_affinity 4 rxdma2host-monitor-destination-mac2
-	set_affinity 4 host2rxdma-monitor-ring2
-
-	set_affinity 2 ppdu-end-interrupts-mac3
-	set_affinity 2 rxdma2host-monitor-status-ring-mac3
-	set_affinity 2 rxdma2host-monitor-destination-mac3
-	set_affinity 2 host2rxdma-monitor-ring3
-}
-

feeds/ipq807x/ipq807x/base-files/lib/upgrade/dualboot_datachk.sh

@@ -0,0 +1,126 @@
+# The U-Boot loader with the datachk patchset for dualbooting requires image
+# sizes and checksums to be provided in the U-Boot environment.
+# The devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
+
+platform_post_upgrade_sanity_check()
+{
+	local part_name=$1
+	local inactive_mtd=$2
+	local cfg_md5=$3
+	local part_offset=$4
+	local part_size=$5
+
+	md5_part_disk=$(dd if=/dev/${inactive_mtd} bs=$((64*1024)) skip=$((part_offset / (64*1024))) count=$((part_size / (64*1024))) 2>&- | md5sum | awk '{print $1}')
+
+	if [ "${cfg_md5}" != "${md5_part_disk}" ]; then
+	      echo "post-flashing checksum mismatch: ${part_name}" >&2
+	      echo "${cfg_md5} != ${md5_part_disk}"
+	      return 1
+	fi
+
+	return 0
+}
+
+platform_do_upgrade_dualboot_datachk() {
+	local tar_file="$1"
+	local restore_backup
+	local primary_kernel_mtd
+
+	local setenv_script="/tmp/fw_env_upgrade"
+
+	local kernel_mtd="$(find_mtd_index $PART_NAME)"
+	local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
+	local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
+
+	# detect to which flash region the new image is written to.
+	#
+	# 1. check what is the mtd index for the first flash region on this
+	#    device
+	# 2. check if the target partition ("inactive") has the mtd index of
+	#    the first flash region
+	#
+	#    - when it is: the new bootseq will be 1,2 and the first region is
+	#      modified
+	#    - when it isnt: bootseq will be 2,1 and the second region is
+	#      modified
+	#
+	# The detection has to be done via the hardcoded mtd partition because
+	# the current boot might be done with the fallback region. Let us
+	# assume that the current bootseq is 1,2. The bootloader detected that
+	# the image in flash region 1 is corrupt and thus switches to flash
+	# region 2. The bootseq in the u-boot-env is now still the same and
+	# the sysupgrade code can now only rely on the actual mtd indexes and
+	# not the bootseq variable to detect the currently booted flash
+	# region/image.
+	#
+	# In the above example, an implementation which uses bootseq ("1,2") to
+	# detect the currently booted image would assume that region 1 is booted
+	# and then overwrite the variables for the wrong flash region (aka the
+	# one which isn't modified). This could result in a device which doesn't
+	# boot anymore to Linux until it was reflashed with ap51-flash.
+	local next_boot_part="1"
+	case "$(board_name)" in
+	plasmacloud,pax1800-v1|\
+	plasmacloud,pax1800-v2)
+		primary_kernel_mtd=9
+		;;
+	*)
+		echo "failed to detect primary kernel mtd partition for board"
+		return 1
+		;;
+	esac
+	[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
+	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+	# rootfs without EOF marker
+	rootfs_length=$((rootfs_length-4))
+
+	local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
+	# md5 checksum of rootfs with EOF marker
+	local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
+
+	#
+	# add tar support to get_image() to use default_do_upgrade() instead?
+	#
+
+	# take care of restoring a saved config
+	[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
+
+	mtd -q erase inactive
+	tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
+	tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
+
+	platform_post_upgrade_sanity_check "kernel" "mtd${kernel_mtd}" $kernel_md5 0 $kernel_length || return 1
+	platform_post_upgrade_sanity_check "rootfs" "mtd${kernel_mtd}" $rootfs_md5 $kernel_length $rootfs_length || return 1
+
+	# prepare new u-boot env
+	if [ "$next_boot_part" = "1" ]; then
+		echo "bootseq 1,2" > $setenv_script
+	else
+		echo "bootseq 2,1" > $setenv_script
+	fi
+
+	printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
+	printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
+	printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
+	printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
+
+	printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
+	printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
+	printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
+	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
+
+	# store u-boot env changes
+	mkdir -p /var/lock
+	fw_setenv -s $setenv_script || {
+		echo "failed to update U-Boot environment"
+		return 1
+	}
+}

feeds/ipq807x/ipq807x/base-files/lib/upgrade/platform.sh

@@ -1,5 +1,9 @@
 . /lib/functions/system.sh
 
+
+RAMFS_COPY_BIN='fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock /tmp/downgrade'
+
 qca_do_upgrade() {
         local tar_file="$1"
 
@@ -16,26 +20,102 @@ qca_do_upgrade() {
         fi
 }
 
+find_mmc_part() {
+	local DEVNAME PARTNAME
+
+	if grep -q "$1" /proc/mtd; then
+		echo "" && return 0
+	fi
+
+	for DEVNAME in /sys/block/mmcblk*/mmcblk*p*; do
+		PARTNAME=$(grep PARTNAME ${DEVNAME}/uevent | cut -f2 -d'=')
+		[ "$PARTNAME" = "$1" ] && echo "/dev/$(basename $DEVNAME)" && return 0
+	done
+}
+
+do_flash_emmc() {
+	local tar_file=$1
+	local emmcblock=$(find_mmc_part $2)
+	local board_dir=$3
+	local part=$4
+
+	[ -z "$emmcblock" ] && {
+		echo failed to find $2
+		return
+	}
+
+	echo erase $4
+	dd if=/dev/zero of=${emmcblock} 2> /dev/null
+	echo flash $4
+	tar Oxf $tar_file ${board_dir}/$part | dd of=${emmcblock}
+}
+
+emmc_do_upgrade_cig() {
+        local tar_file="$1"
+
+        local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+        board_dir=${board_dir%/}
+	
+        do_flash_emmc $tar_file '0:HLOS_1' $board_dir kernel
+        do_flash_emmc $tar_file 'rootfs_1' $board_dir root
+
+        local emmcblock="$(find_mmc_part "rootfs_data")"
+        if [ -e "$emmcblock" ]; then
+                mkfs.ext4 -F "$emmcblock"
+        fi
+}
+
+
+emmc_do_upgrade() {
+	local tar_file="$1"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+	do_flash_emmc $tar_file '0:HLOS' $board_dir kernel
+	do_flash_emmc $tar_file 'rootfs' $board_dir root
+
+	local emmcblock="$(find_mmc_part "rootfs_data")"
+        if [ -e "$emmcblock" ]; then
+                mkfs.ext4 -F "$emmcblock"
+        fi
+}
+
 platform_check_image() {
 	local magic_long="$(get_magic_long "$1")"
 	board=$(board_name)
 	case $board in
 	cig,wf188|\
+	cig,wf660a|\
 	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4|\
 	cig,wf196|\
 	cybertan,eww622-a1|\
+	glinet,ax1800|\
+	glinet,axt1800|\
+	indio,um-310ax-v1|\
+	indio,um-510axp-v1|\
+	indio,um-510axm-v1|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
 	edgecore,eap101|\
 	edgecore,eap102|\
 	edgecore,eap104|\
+	liteon,wpx8324|\
 	edgecore,eap106|\
 	hfcl,ion4xi|\
+	hfcl,ion4x|\
+	hfcl,ion4x_2|\
 	hfcl,ion4xe|\
+	muxi,ap3220l|\
+	plasmacloud,pax1800-v1|\
+	plasmacloud,pax1800-v2|\
 	tplink,ex227|\
 	tplink,ex447|\
+	yuncore,ax840|\
+	yuncore,fap650|\
+	motorola,q14|\
+	muxi,ap3220l|\
 	qcom,ipq6018-cp01|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
@@ -56,30 +136,79 @@ platform_do_upgrade() {
 	cig,wf188)
 		qca_do_upgrade $1
 		;;
+	cig,wf660a)
+		emmc_do_upgrade_cig $1
+		;;
+	motorola,q14)
+		emmc_do_upgrade $1
+		;;
 	cig,wf188n|\
 	cig,wf194c|\
 	cig,wf194c4|\
 	cig,wf196|\
 	cybertan,eww622-a1|\
-	edgecore,eap104|\
-	hfcl,ion4xi|\
-	hfcl,ion4xe|\
+	glinet,ax1800|\
+	glinet,axt1800|\
+	indio,um-310ax-v1|\
+	indio,um-510axp-v1|\
+	indio,um-510axm-v1|\
 	qcom,ipq6018-cp01|\
 	qcom,ipq807x-hk01|\
 	qcom,ipq807x-hk14|\
 	qcom,ipq5018-mp03.3|\
 	wallys,dr6018|\
 	wallys,dr6018-v4|\
+	yuncore,ax840|\
+	yuncore,fap650|\
 	tplink,ex447|\
-	tplink,ex227)	
+	tplink,ex227|\
+	meshpp,s618-cp03|\
+	meshpp,s618-cp01)
 		nand_upgrade_tar "$1"
 		;;
-	edgecore,eap106|\
-	edgecore,eap102|\
-	edgecore,eap101)
+	hfcl,ion4xi|\
+	hfcl,ion4x|\
+	hfcl,ion4x_2|\
+	hfcl,ion4xe)
+		if grep -q rootfs_1 /proc/cmdline; then
+			CI_UBIPART="rootfs"
+			fw_setenv primary 0 || exit 1
+		else
+			CI_UBIPART="rootfs_1"
+			fw_setenv primary 1 || exit 1
+		fi
+		nand_upgrade_tar "$1"
+		;;
+	edgecore,eap104|\
+	liteon,wpx8324|\
+	edgecore,eap106)
 		CI_UBIPART="rootfs1"
 		[ "$(find_mtd_chardev rootfs)" ] && CI_UBIPART="rootfs"
 		nand_upgrade_tar "$1"
 		;;
+	edgecore,eap101|\
+	edgecore,eap102)
+		if [ "$(find_mtd_chardev rootfs)" ]; then
+			CI_UBIPART="rootfs"
+		else
+			if [ -e /tmp/downgrade ]; then
+				CI_UBIPART="rootfs1"
+				fw_setenv active 1 || exit 1
+				fw_setenv upgrade_available 0 || exit 1
+			elif grep -q rootfs1 /proc/cmdline; then
+				CI_UBIPART="rootfs2"
+				fw_setenv active 2 || exit 1
+			else
+				CI_UBIPART="rootfs1"
+				fw_setenv active 1 || exit 1
+			fi
+		fi
+		nand_upgrade_tar "$1"
+		;;
+	plasmacloud,pax1800-v1|\
+	plasmacloud,pax1800-v2)
+		PART_NAME="inactive"
+		platform_do_upgrade_dualboot_datachk "$1"
+		;;
 	esac
 }

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-liteon-wpx8324.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-liteon-wpx8324.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-muxi-ap3220l.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-muxi-ap3220l.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq5018-q14.dts

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq5018-q14.dts"
+
+/ {
+	pmuv8: pmu {
+		compatible = "arm,cortex-a7-pmu";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-cig-wf660a.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-gl-ax1800.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-gl-ax1800.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-gl-axt1800.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-gl-axt1800.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-hfcl-ion4x.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-hfcl-ion4x_2.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x_2.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-indio-um-310ax-v1.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-indio-um-310ax-v1.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-indio-um-510axm-v1.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axm-v1.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-indio-um-510axp-v1.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axp-v1.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-meshpp-s618-cp01.dts

@@ -0,0 +1,2 @@
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp01.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-meshpp-s618-cp03.dts

@@ -0,0 +1,2 @@
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp03.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-pax1800-v1.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v1.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-pax1800-v2.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v2.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-yuncore-ax840.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-yuncore-ax840.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm/boot/dts/qcom-ipq6018-yuncore-fap650.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "../../../arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts"
+#include "qcom-ipq6018.dtsi"

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-eww622-a1.dts

@@ -32,6 +32,10 @@
 		serial1 = &blsp1_uart2;
 		ethernet0 = "/soc/dp1";
 		ethernet1 = "/soc/dp2";
+	        led-boot = &led_sys;
+		led-failsafe = &led_sys;
+		led-running = &led_sys;
+		led-upgrade = &led_sys;
 	};
 
 	chosen {
@@ -708,32 +712,20 @@
 		pinctrl-0 = <&leds_pins>;
 		pinctrl-names = "default";
 
-		led@1 {
+		led_sys: led@1 {
 			label = "sys:blue";
 			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;  /* GPIO_1 */
-		/*	default-state="on"; */
-			linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
 			default-state="on";
 		};
 		led@35 {
 			label = "sys:green";
 			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;  /* GPIO_35 */
 			default-state="off";
-		/*	linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
-			default-state="on";		*/
 		};
 		led@31 {
 			label = "sys:red";
 			gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;  /* GPIO_31 */
 			default-state="off";
-		/*	linux,default-trigger = "timer";
-			active-delay = <700>;
-			inactive-delay = <700>;
-			default-state="on";		*/
 		};
 	};
 };

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-liteon-wpx8324.dts

@@ -0,0 +1,812 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Liteon WPX8324";
+	compatible = "liteon,wpx8324", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		/*serial1 = &blsp1_uart2;*/
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E400000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F400000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4500000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          14MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D600000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4ED00000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x5400000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D400000 {
+			no-map;
+			reg = <0x0 0x4D400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+			no-map;
+			reg = <0x0 0x4D600000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+			no-map;
+			reg = <0x0 0x4E600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+			no-map;
+			reg = <0x0 0x4E700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
+			no-map;
+			reg = <0x0 0x4E800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+			no-map;
+			reg = <0x0 0x4FD00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+			no-map;
+			reg = <0x0 0x4FE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+			no-map;
+			reg = <0x0 0x4FF00000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		spi_2: spi@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&blsp2_spi0_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			tpm0: slb9670@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <1>;	/* CE1 */
+				compatible = "infineon,slb9670";
+				linux,modalias = "slb9670", "slb9670a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+ 			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 26 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+		wifi0: wifi@c000000 {
+			status = "ok";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_blue: led@19 {
+			label = "blue:uplink";
+			gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led_orange: led@18 {
+			label = "orange:wifi2";
+			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led_green: led@39 {
+			label = "green:wifi5";
+			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_orange {
+			pins = "gpio18";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_green {
+			pins = "gpio39";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_spi0_pins: blsp2_spi0_pins {
+		mux {
+			pins = "gpio31", "gpio32", "gpio33", "gpio34";
+			function = "blsp2_spi0";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_cs {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_0 {
+			pins = "gpio7";
+			function = "qspi0";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_1 {
+			pins = "gpio6";
+			function = "qspi1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_2 {
+			pins = "gpio5";
+			function = "qspi2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		qspi_data_3 {
+			pins = "gpio4";
+			function = "qspi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio18", "gpio19", "gpio39";
+			/* function = "led0"; */
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio29";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&usb3 {
+	status = "ok";
+	device-power-gpio = <&tlmm 28 0>;
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "disabled";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "disabled";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "disabled";
+};
+
+&pcie_x2phy {
+	status = "disabled";
+};
+
+&pcie_x1_rp {
+        status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	qcom,multipd_arch;
+	memory-region = <&q6_mem_regions>;
+	qcom,share_bootargs;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+		#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+		#endif
+	};
+
+	/* QCN6122 6G */
+	q6v5_wcss_userpd2 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <2>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+		#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+		#endif
+	};
+
+	/* QCN6122 5G */
+	q6v5_wcss_userpd3 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+			<&wcss_smp2p_in 25 0>,
+			<&wcss_smp2p_in 28 0>,
+			<&wcss_smp2p_in 27 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+			<&wcss_smp2p_out 25>,
+			<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <3>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+		#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+		#endif
+	};
+};
+
+&qgic_msi_0 {
+	status = "ok";
+};
+
+&qgic_msi_1 {
+	status = "ok";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4D400000>;
+	m3-dump-addr = <0x4D200000>;
+#endif
+	qcom,caldb-size = <0x200000>;
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+#endif
+	qcom,caldb-size = <0x500000>;
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-muxi-ap3220l.dts

@@ -0,0 +1,891 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "MUXI AP3220L";
+	compatible = "muxi,ap3220l", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E400000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F400000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4500000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          14MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D600000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4ED00000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x5400000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D400000 {
+			no-map;
+			reg = <0x0 0x4D400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+			no-map;
+			reg = <0x0 0x4D600000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+			no-map;
+			reg = <0x0 0x4E600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+			no-map;
+			reg = <0x0 0x4E700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
+			no-map;
+			reg = <0x0 0x4E800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+			no-map;
+			reg = <0x0 0x4FD00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+			no-map;
+			reg = <0x0 0x4FE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+			no-map;
+			reg = <0x0 0x4FF00000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+
+		blsp1_uart1: serial@78af000 {
+			pinctrl-0 = <&blsp0_uart_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&qspi_nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins &phy_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x2>;
+			ess-switch@0x39c00000 {
+				compatible = "qcom,ess-switch-ipq50xx";
+				device_id = <0>;
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+					};
+					port@1 {
+						port_id = <2>;
+						forced-speed = <1000>;
+						forced-duplex = <1>;
+					};
+				};
+				/*
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+				*/
+			};
+			ess-switch1@1 {
+				compatible = "qcom,ess-switch-qca83xx";
+				device_id = <1>;
+				switch_access_mode = "mdio";
+				mdio-bus = <&mdio1>;
+				reset_gpio = <0x27>;
+				switch_cpu_bmp = <0x40>;  /* cpu port bitmap */
+				switch_lan_bmp = <0x1e>; /* lan port bitmap */
+				switch_wan_bmp = <0x0>;  /* wan port bitmap */
+				qca,ar8327-initvals = <
+						0x00004 0x7600000   /* PAD0_MODE */
+						0x00008 0x1000000   /* PAD5_MODE */
+						0x0000c 0x80        /* PAD6_MODE */
+						0x00010 0x2613a0    /* PORT6 FORCE MODE*/
+						0x000e4 0xaa545     /* MAC_POWER_SEL */
+						0x000e0 0xc74164de  /* SGMII_CTRL */
+						0x0007c 0x4e        /* PORT0_STATUS */
+						0x00094 0x4e        /* PORT6_STATUS */
+				>;
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <1>;
+					};
+					port@2 {
+						port_id = <3>;
+						phy_address = <2>;
+					};
+					port@3 {
+						port_id = <4>;
+						phy_address = <3>;
+					};
+				};
+			};
+		};
+
+		ess-uniphy@98000 {
+			status = "disabled";
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <3>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&tlmm {
+	//pinctrl-0 = <&phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio23", "gpio25";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	qspi_nand_pins: qspi_nand_pins {
+		qspi_clock {
+				pins = "gpio9";
+				function = "qspi_clk";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_cs {
+				pins = "gpio8";
+				function = "qspi_cs";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_0 {
+				pins = "gpio7";
+				function = "qspi0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_1 {
+				pins = "gpio6";
+				function = "qspi1";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_2 {
+				pins = "gpio5";
+				function = "qspi2";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		qspi_data_3 {
+				pins = "gpio4";
+				function = "qspi3";
+				drive-strength = <8>;
+				bias-disable;
+			};
+	};
+
+	phy_pins: phy_pins {
+		phy_intr {
+			pins = "gpio29";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+			bias-disable;
+		};
+		phy_reset {
+			pins = "gpio39";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			output-low;
+		};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			//pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	led_pins: led_pins {
+		led_pwr {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_2g {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_5g {
+			pins = "gpio33";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "reset_button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+			led_power: led_pwr {
+				label = "green:led_pwr";
+				gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+				default-state = "on";
+				linux,default-trigger = "led_pwr";
+			};
+
+			led_2g {
+				label = "green:wifi2";
+				gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led_5g {
+				label = "green:wifi5";
+				gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+	};
+};
+
+&usb3 {
+	status = "ok";
+	device-power-gpio = <&tlmm 30 1>;
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "disabled";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "disabled";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "disabled";
+};
+
+&pcie_x2phy {
+	status = "disabled";
+};
+
+&pcie_x1_rp {
+        status = "disabled";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "disabled";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	qcom,multipd_arch;
+	memory-region = <&q6_mem_regions>;
+	qcom,share_bootargs;
+	qcom,bootargs_smem = <507>;
+	boot-args = <0x2 0x4 0x2 0xF 0x0 0x0>;
+
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+		#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+		#endif
+	};
+
+	/* QCN6122 6G */
+	q6v5_wcss_userpd2 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <2>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+		#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+		#endif
+	};
+
+	/* QCN6122 5G */
+	q6v5_wcss_userpd3 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+			<&wcss_smp2p_in 25 0>,
+			<&wcss_smp2p_in 28 0>,
+			<&wcss_smp2p_in 27 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+			<&wcss_smp2p_out 25>,
+			<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <3>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+		#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+		#endif
+	};
+};
+
+&qgic_msi_0 {
+	status = "ok";
+};
+
+&qgic_msi_1 {
+	status = "ok";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4D400000>;
+	m3-dump-addr = <0x4D200000>;
+#endif
+	qcom,caldb-size = <0x200000>;
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4E800000>;
+	m3-dump-addr = <0x4E600000>;
+#endif
+	qcom,caldb-size = <0x500000>;
+	status = "disabled";
+};
+
+&wifi2 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+#endif
+	qcom,caldb-size = <0x500000>;
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq5018-q14.dts

@@ -0,0 +1,886 @@
+/dts-v1/;
+/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq5018.dtsi"
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Motorola Q14";
+	compatible = "motorola,q14", "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+	#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	#endif
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+	#ifdef __IPQ_MEM_PROFILE_256_MB__
+	/*                   256 MB Profile
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |           8MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x40800000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          13MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D100000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D300000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4E400000  |          15MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4F300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4F400000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x4500000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x1400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xD00000>;
+		};
+
+		m3_dump: m3_dump@4D100000 {
+			no-map;
+			reg = <0x0 0x4D100000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E200000 {
+			no-map;
+			reg = <0x0 0x4E200000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E300000 {
+			no-map;
+			reg = <0x0 0x4E300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E400000 {
+			no-map;
+			reg = <0x0 0x4E400000 0x0 0xF00000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4F300000 {
+			no-map;
+			reg = <0x0 0x4F300000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4F400000 {
+			no-map;
+			reg = <0x0 0x4F400000 0x0 0x100000>;
+		};
+	#else
+	/*                 512MB/1GB Profiles
+	 * +==========+==============+=========================+
+	 * |          |              |                         |
+	 * |  Region  | Start Offset |          Size           |
+	 * |          |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |    NSS   |  0x40000000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   Linux  |  0x41000000  | Depends on total memory |
+	 * +----------+--------------+-------------------------+
+	 * |   uboot  |  0x4A600000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    SBL   |  0x4AA00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |   smem   |  0x4AB00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    TZ    |  0x4AC00000  |           4MB           |
+	 * +----------+--------------+-------------------------+
+	 * |    Q6    |              |                         |
+	 * |   code/  |  0x4B000000  |          20MB           |
+	 * |   data   |              |                         |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   data   |  0x4C400000  |          14MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  M3 Dump |  0x4D200000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |   QDSS   |  0x4D300000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * |  IPQ5018 |              |                         |
+	 * |  Caldb   |  0x4D400000  |           2MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   data   |  0x4D600000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  M3 Dump |  0x4E600000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |   QDSS   |  0x4E700000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_1|              |                         |
+	 * |  Caldb   |  0x4E800000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   data   |  0x4ED00000  |          16MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  M3 Dump |  0x4FD00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |   QDSS   |  0x4FE00000  |           1MB           |
+	 * +----------+--------------+-------------------------+
+	 * | QCN6122_2|              |                         |
+	 * |  Caldb   |  0x4FF00000  |           5MB           |
+	 * +----------+--------------+-------------------------+
+	 * |                                                   |
+	 * |            Rest of the memory for Linux           |
+	 * |                                                   |
+	 * +===================================================+
+	 */
+		q6_mem_regions: q6_mem_regions@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 0x5400000>;
+		};
+
+		q6_code_data: q6_code_data@4B000000 {
+			no-map;
+			reg = <0x0 0x4B000000 0x0 01400000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4C400000 {
+			no-map;
+			reg = <0x0 0x4C400000 0x0 0xE00000>;
+		};
+
+		m3_dump: m3_dump@4D200000 {
+			no-map;
+			reg = <0x0 0x4D200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4D300000 {
+			no-map;
+			reg = <0x0 0x4D300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4D400000 {
+			no-map;
+			reg = <0x0 0x4D400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4D600000 {
+			no-map;
+			reg = <0x0 0x4D600000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_1: m3_dump_qcn6122_1@4E600000 {
+			no-map;
+			reg = <0x0 0x4E600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4E700000 {
+			no-map;
+			reg = <0x0 0x4E700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4E800000 {
+			no-map;
+			reg = <0x0 0x4E800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data2@4E900000 {
+			no-map;
+			reg = <0x0 0x4ED00000 0x0 0x1000000>;
+		};
+
+		m3_dump_qcn6122_2: m3_dump_qcn6122_2@4FD00000 {
+			no-map;
+			reg = <0x0 0x4FD00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4FE00000 {
+			no-map;
+			reg = <0x0 0x4FE00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4FF00000 {
+			no-map;
+			reg = <0x0 0x4FF00000 0x0 0x500000>;
+		};
+
+	#endif
+	};
+
+	soc {
+		serial@78af000 {
+			status = "ok";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			pinctrl-0 = <&blsp1_uart_pins>;
+			pinctrl-names = "default";
+		};
+
+		qpic_bam: dma@7984000{
+			status = "ok";
+		};
+
+		nand: qpic-nand@79b0000 {
+			status = "disabled";
+		};
+
+		spi_0: spi@78b5000 { /* BLSP1 QUP0 */
+			pinctrl-0 = <&blsp0_spi_pins>;
+			pinctrl-names = "default";
+			cs-select = <0>;
+			status = "ok";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				linux,modalias = "m25p80", "n25q128a11";
+				spi-max-frequency = <50000000>;
+				use-default-sizes;
+			};
+		};
+
+		mdio0: mdio@88000 {
+			status = "ok";
+
+			ethernet-phy@0 {
+				reg = <7>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio1_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 39 0>;
+
+			ethernet-phy@0 {
+				reg = <28>;
+			};
+		};
+
+		ess-instance {
+			num_devices = <0x1>;
+			ess-switch@0x39c00000 {
+				switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/
+				cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/
+				qcom,port_phyinfo {
+					port@0 {
+						port_id = <1>;
+						phy_address = <7>;
+						mdiobus = <&mdio0>;
+					};
+					port@1 {
+						port_id = <2>;
+						phy_address = <0x1c>;
+						mdiobus = <&mdio1>;
+						port_mac_sel = "QGMAC_PORT";
+					};
+				};
+				led_source@0 {
+					source = <0>;
+					mode = "normal";
+					speed = "all";
+					blink_en = "enable";
+					active = "high";
+				};
+			};
+		};
+
+		dp1 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <1>;
+			reg = <0x39C00000 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <7>;
+			mdio-bus = <&mdio0>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		dp2 {
+			device_type = "network";
+			compatible = "qcom,nss-dp";
+			clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>;
+			clock-names = "nss-snoc-gmac-axi-clk";
+			qcom,id = <2>;
+			reg = <0x39D00000 0x10000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,mactype = <2>;
+			qcom,link-poll = <1>;
+			qcom,phy-mdio-addr = <28>;
+			mdio-bus = <&mdio1>;
+			local-mac-address = [000000000000];
+			phy-mode = "sgmii";
+		};
+
+		qcom,test@0 {
+			status = "ok";
+		};
+
+		nss-macsec1 {
+			compatible = "qcom,nss-macsec";
+			phy_addr = <0x1c>;
+			mdiobus = <&mdio1>;
+		};
+
+		lpass: lpass@0xA000000{
+			status = "disabled";
+		};
+
+		pcm: pcm@0xA3C0000{
+			pinctrl-0 = <&audio_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pcm_lb: pcm_lb@0 {
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		status = "ok";
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+	qcom,clk-rates = <400000 25000000 50000000 100000000 \
+			 192000000 384000000>;
+	qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+	qcom,nonremovable;
+	status = "ok";
+};
+
+&tlmm {
+	pinctrl-0 = <&blsp0_uart_pins &phy_led_pins>;
+	pinctrl-names = "default";
+
+	blsp0_uart_pins: uart_pins {
+		blsp0_uart_rx_tx {
+			pins = "gpio20", "gpio21";
+			function = "blsp0_uart0";
+			bias-disable;
+		};
+	};
+
+	blsp1_uart_pins: blsp1_uart_pins {
+		blsp1_uart_rx_tx {
+			pins = "gpio23", "gpio25", "gpio24", "gpio26";
+			function = "blsp1_uart2";
+			bias-disable;
+		};
+	};
+
+	blsp0_spi_pins: blsp0_spi_pins {
+		mux {
+			pins = "gpio10", "gpio11", "gpio12", "gpio13";
+			function = "blsp0_spi";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	emmc_pins: emmc_pins {
+		emmc_clk {
+				pins = "gpio9";
+				function = "sdc1_clk";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		emmc_cmd {
+				pins = "gpio8";
+				function = "sdc1_cmd";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		emmc_data_0 {
+				pins = "gpio7";
+				function = "sdc10";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		emmc_data_1 {
+				pins = "gpio6";
+				function = "sdc11";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		emmc_data_2 {
+				pins = "gpio5";
+				function = "sdc12";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		emmc_data_3 {
+				pins = "gpio4";
+				function = "sdc13";
+				drive-strength = <8>;
+				bias-disable;
+			};
+	};
+
+	mdio1_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	phy_led_pins: phy_led_pins {
+		gephy_led_pin {
+			pins = "gpio46";
+			function = "led0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	i2c_pins: i2c_pins {
+		i2c_scl {
+			pins = "gpio25";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		i2c_sda {
+			pins = "gpio26";
+			function = "blsp2_i2c1";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio38";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		
+		reset_button {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};		
+		
+	};
+
+	audio_pins: audio_pinmux {
+		mux_1 {
+			pins = "gpio24";
+			function = "audio_rxbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_2 {
+			pins = "gpio25";
+			function = "audio_rxfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_3 {
+			pins = "gpio26";
+			function = "audio_rxd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_4 {
+			pins = "gpio27";
+			function = "audio_txmclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_5 {
+			pins = "gpio28";
+			function = "audio_txbclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_6 {
+			pins = "gpio29";
+			function = "audio_txfsync";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		mux_7 {
+			pins = "gpio30";
+			function = "audio_txd";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+};
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		
+		button@2 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};			
+		
+	};
+};
+
+&usb3 {
+	status = "ok";
+	device-power-gpio = <&tlmm 24 1>;
+};
+
+&eud {
+	status = "ok";
+};
+
+&pcie_x1 {
+	status = "ok";
+	perst-gpio = <&tlmm 18 1>;
+};
+
+&pcie_x2 {
+	status = "ok";
+	perst-gpio = <&tlmm 15 1>;
+};
+
+&dwc_0 {
+	/delete-property/ #phy-cells;
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&hs_m31phy_0 {
+	status = "ok";
+};
+
+&pcie_x1phy {
+	status = "ok";
+};
+
+&pcie_x2phy {
+	status = "ok";
+};
+
+&pcie_x1_rp {
+        status = "ok";
+
+	mhi_0: qcom,mhi@0 {
+		reg = <0 0 0 0 0 >;
+	};
+};
+
+&pcie_x2_rp {
+        status = "ok";
+
+	mhi_1: qcom,mhi@1 {
+		reg = <0 0 0 0 0 >;
+
+	};
+};
+
+&qfprom {
+	status = "ok";
+};
+
+&tsens {
+	status = "ok";
+};
+
+&qcom_q6v5_wcss {
+	qcom,multipd_arch;
+	memory-region = <&q6_mem_regions>;
+	qcom,share_bootargs;
+	qcom,bootargs_smem = <507>;
+boot-args = <0x1 0x4 0x3 0x0F 0x0 0x0>,
+			<0x2 0x4 0x2 0x12 0x0 0x0>;	
+			
+	/* IPQ5018 */
+	q6v5_wcss_userpd1 {
+		m3_firmware = "IPQ5018/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <1>;
+		qca,auto-restart;
+		qca,int_radio;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>;
+		#else
+		memory-region = <&q6_ipq5018_data>, <&m3_dump>,
+				<&q6_etr_region>, <&q6_caldb_region>;
+		#endif
+	};
+
+	/* QCN6122 6G */
+	q6v5_wcss_userpd2 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <2>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>;
+		#else
+		memory-region = <&q6_qcn6122_data1>, <&m3_dump_qcn6122_1>,
+				<&q6_qcn6122_etr_1>, <&q6_qcn6122_caldb_1>;
+		#endif
+	};
+
+	/* QCN6122 5G */
+	q6v5_wcss_userpd3 {
+		m3_firmware = "qcn6122/m3_fw.mdt";
+		interrupts-extended = <&wcss_smp2p_in 24 0>,
+			<&wcss_smp2p_in 25 0>,
+			<&wcss_smp2p_in 28 0>,
+			<&wcss_smp2p_in 27 0>;
+		interrupt-names ="fatal",
+			"ready",
+			"spawn_ack",
+			"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 24>,
+			<&wcss_smp2p_out 25>,
+			<&wcss_smp2p_out 26>;
+		qcom,smem-state-names = "shutdown",
+			"stop",
+			"spawn";
+		qca,asid = <3>;
+		qca,auto-restart;
+		#ifdef __IPQ_MEM_PROFILE_256_MB__
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>;
+		#else
+		memory-region = <&q6_qcn6122_data2>, <&m3_dump_qcn6122_2>,
+				<&q6_qcn6122_etr_2>, <&q6_qcn6122_caldb_2>;
+		#endif
+	};
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&qgic_msi_0 {
+	status = "ok";
+};
+
+&qgic_msi_1 {
+	status = "ok";
+};
+
+&wifi0 {
+	/* IPQ5018 */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x24>;
+	qcom,bdf-addr = <0x4C400000 0x4C400000 0x4C400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4D400000 0x4D400000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4D400000>;
+	m3-dump-addr = <0x4D200000>;
+	nss-radio-priority = <0>;
+#endif
+	mem-region = <&q6_ipq5018_data>;
+	qcom,caldb-size = <0x200000>;
+	status = "ok";
+};
+
+&wifi1 {
+	/* QCN6122 5G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0x60>;
+	qcom,bdf-addr = <0x4D600000 0x4D600000 0x4D300000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4E800000 0x4E800000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4E800000>;
+	m3-dump-addr = <0x4E600000>;
+	nss-radio-priority = <1>;
+#endif
+	mem-region = <&q6_qcn6122_data1>;
+	qcom,caldb-size = <0x500000>;
+	status = "ok";
+};
+
+&wifi2 {
+	/* QCN6122 6G */
+	qcom,multipd_arch;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+	qcom,tgt-mem-mode = <2>;
+#else
+	qcom,tgt-mem-mode = <1>;
+#endif
+	qcom,board_id = <0xb0>;
+	qcom,bdf-addr = <0x4ED00000 0x4ED00000 0x4E400000 0x0 0x0>;
+#ifdef __CNSS2__
+	qcom,caldb-addr = <0x4FF00000 0x4FF00000 0 0 0>;
+#else
+	qcom,caldb-addr = <0x4FF00000>;
+	m3-dump-addr = <0x4FD00000>;
+	nss-radio-priority = <1>;
+#endif
+	mem-region = <&q6_qcn6122_data2>;
+	qcom,caldb-size = <0x500000>;
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a-cp01.dtsi

@@ -0,0 +1,590 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	compatible = "cig,wf660a", "qcom,ipq6018-cp01", "qcom,ipq6018";
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x192 0x0>, <0x193 0x0>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+		sdhc1 = &sdhc_1;
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+#endif
+	};
+
+};
+
+&tlmm {
+	pinctrl-0 = <&sd_ldo_pins>;
+	pinctrl-names = "default";
+
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sd_ldo_pins: sd_ldo_pins {
+		mux {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_1_pins: spi_1_pins {
+		mux {
+			pins = "gpio69", "gpio71", "gpio72";
+			function = "blsp1_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		spi_cs {
+			pins = "gpio70";
+			function = "blsp1_spi";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		quartz_interrupt {
+			pins = "gpio78";
+			function = "gpio";
+			input;
+			bias-disable;
+		};
+		quartz_reset {
+			pins = "gpio79";
+			function = "gpio";
+			output-low;
+			bias-disable;
+		};
+
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		qpic_pad {
+			pins = "gpio1", "gpio3", "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sd_pins: sd_pins {
+		mux {
+			pins = "gpio62";
+			function = "sd_card";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	extcon_usb_pins: extcon_usb_pins {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		reset_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+		mux_3 {
+			pins = "gpio77";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_usb0 {
+			pins = "gpio50";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	hsuart_pins: hsuart_pins {
+		mux {
+			pins = "gpio71", "gpio72";
+			function = "blsp1_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	btcoex_pins: btcoex_pins {
+		mux_0 {
+			pins = "gpio51";
+			function = "pta1_1";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+		mux_1 {
+			pins = "gpio53";
+			function = "pta1_0";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+		mux_2 {
+			pins = "gpio52";
+			function = "pta1_2";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+	};
+	pwm_pins: pwm_pinmux {
+        mux_1 {
+                pins = "gpio22";
+                function = "pwm02";
+                drive-strength = <8>;
+        };
+		mux_2 {
+			pins = "gpio23";
+            function = "pwm12";
+            drive-strength = <8>;
+		};
+		mux_3 {
+			pins = "gpio24";
+            function = "pwm22";
+            drive-strength = <8>;
+		};
+		
+        };
+};
+
+&soc {
+	pwm {
+                pinctrl-0 = <&pwm_pins>;
+                pinctrl-names = "default";
+                used-pwm-indices = <1>, <1>, <1>, <0>;
+                status = "ok";
+        };
+	extcon_usb: extcon_usb {
+		pinctrl-0 = <&extcon_usb_pins>;
+		pinctrl-names = "default";
+		id-gpio = <&tlmm 26 GPIO_ACTIVE_LOW>;
+		status = "ok";
+	};
+
+	mdio: mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0 &tlmm 77 1>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+		};
+		phy4: ethernet-phy@4 {
+			reg = <0x1c>;
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <28>;
+		phy-mode = "sgmii";
+	};
+
+	nss-macsec0 {
+		compatible = "qcom,nss-macsec";
+		phy_addr = <0x1c>;
+		phy_access_mode = <0>;
+		mdiobus = <&mdio>;
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x1e>; /* lan port bitmap */
+		switch_wan_bmp = <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xf>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <1>;
+				phy_address = <0>;
+			};
+			port@1 {
+				port_id = <2>;
+				phy_address = <1>;
+			};
+			port@2 {
+				port_id = <3>;
+				phy_address = <2>;
+			};
+			port@3 {
+				port_id = <4>;
+				phy_address = <3>;
+			};
+			port@4 {
+				port_id = <5>;
+				phy_address = <0x1c>;
+				port_mac_sel = "QGMAC_PORT";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		reset {
+			label = "reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@35 {
+			label = "led_5g";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_5g";
+			default-state = "off";
+		};
+		led@37 {
+			label = "led_2g";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "led_2g";
+			default-state = "off";
+		};
+		led@50 {
+			label = "led_usb0";
+			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+i2c_4: i2c@78b9000 {
+	compatible = "qcom,i2c-qup-v2.2.1";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x78b9000 0x600>;
+	interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&gcc GCC_BLSP1_AHB_CLK>,<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+	clock-names = "iface", "core";
+	clock-frequency  = <100000>;
+	dmas = <&blsp_dma 21>, <&blsp_dma 20>;
+	dma-names = "rx", "tx";
+	status = "disabled";
+};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&hsuart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_1_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	quartz-reset-gpio = <&tlmm 79 1>;
+	status = "disabled";
+	spidev1: spi@1 {
+		compatible = "qca,spidev";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+	};
+};
+
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "disable";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&pcie_phy {
+	status = "ok";
+};
+
+&pcie0 {
+#if defined(__CNSS2__)
+	status = "ok";
+#endif
+};
+
+&qpic_lcd {
+	status = "ok";
+};
+
+&qpic_lcd_panel {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-cig-wf660a.dts

@@ -0,0 +1,120 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-cig-wf660a-cp01.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+
+/ {
+	model = "Cigtech WF-660a";
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	i2c_0_pins: i2c_0_pins {
+		mux {
+			pins = "gpio69", "gpio70";
+			function = "blsp1_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	i2c_1_pins: i2c_1_pins {
+		mux {
+			pins = "gpio42", "gpio43";
+			function = "blsp2_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	i2c_4_pins: i2c_4_pins {
+		mux {
+			pins = "gpio55", "gpio56";
+			function = "blsp4_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};	
+	
+};
+
+&i2c_0 {
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+
+&i2c_1 {
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&i2c_4 {
+	pinctrl-0 = <&i2c_4_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&sdhc_1 {
+	status = "ok";
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-ax1800.dts

@@ -0,0 +1,78 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-gl-ax1800.dtsi"
+
+/ {
+	model = "GL Technologies, Inc. AX1800";
+	compatible = "glinet,ax1800", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+	};
+};
+
+&mdio0 {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&ess0 {
+	switch_lan_bmp = <0x3c>; /* lan port bitmap */
+
+	qcom,port_phyinfo {
+		port@3 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+		port@4 {
+			port_id = <5>;
+			phy_address = <4>;
+		};
+	};
+};
+
+&soc {
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-ax1800.dtsi

@@ -0,0 +1,364 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x1A5 0x0>;
+
+	aliases {
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+
+		led-boot = &led_run;
+		led-failsafe = &led_run;
+		led-running = &led_run;
+		led-upgrade = &led_run;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		qpic_pad {
+			pins = "gpio1", "gpio3", "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		switch_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		reset_button {
+			pins = "gpio18";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio74";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		white {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		blue {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	usb_pins: usb_pins {
+		usb_pwr {
+			pins = "gpio0";
+			function = "gpio";
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&soc {
+	mdio0: mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+
+	ess0: ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x0c>; /* lan port bitmap */
+		switch_wan_bmp = <0x02>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <1>;
+				phy_address = <0>;
+			};
+			port@1 {
+				port_id = <2>;
+				phy_address = <1>;
+			};
+			port@2 {
+				port_id = <3>;
+				phy_address = <2>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_run: led@35 {
+			label = "white:sys";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@37 {
+			label = "blue:wan";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		switch {
+			label = "switch";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&usb3 {
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&q6_region {
+	reg = <0x0 0x4ab00000 0x0 0x05500000>;
+};
+
+&CPU0 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU1 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU2 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU3 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+	>;
+	clock-latency = <200000>;
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-axt1800.dts

@@ -0,0 +1,94 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-gl-ax1800.dtsi"
+
+/ {
+	model = "GL Technologies, Inc. AXT1800";
+	compatible = "glinet,axt1800", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		sdhc0 = &sdhc_2;
+	};
+};
+
+&tlmm {
+	sd_pins: sd_pins {
+		sd {
+			pins = "gpio62";
+			function = "sd_card";
+			bias-pull-up;
+		};
+		ldo {
+			pins = "gpio66";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	pwm_pins: pwm_pinmux {
+		pwm {
+			pins = "gpio30";
+			function = "pwm13";
+			drive-strength = <8>;
+		};
+	};
+
+	fan_pins: fan_pins {
+		pwr {
+			pins = "gpio29";
+			function = "gpio";
+			bias-pull-up;
+			output-high;
+		};
+		speed {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	pwm:pwm {
+		#pwm-cells = <2>;
+		pinctrl-0 = <&pwm_pins>;
+		pinctrl-names = "default";
+		used-pwm-indices = <0>, <1>, <0>, <0>;
+		status = "ok";
+	};
+
+	pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-0 = <&fan_pins>;
+		pinctrl-names = "default";
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		pwms = <&pwm 1 255>;
+		cooling-levels = <0 150 200 255>;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+	cd-gpios = <&tlmm 62 1>;
+	sd-ldo-gpios = <&tlmm 66 1>;
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x.dts

@@ -0,0 +1,155 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-cp01-hfcl.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+
+/ {
+	model = "HFCL ION4X";
+	compatible = "hfcl,ion4x", "qcom,ipq6018-cp01", "qcom,ipq6018";
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	i2c_1_pins: i2c_1_pins {
+		mux {
+			pins = "gpio42", "gpio43";
+			function = "blsp2_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	
+	i2c_2_pins: i2c_2_pins {
+                mux {
+                        pins = "gpio55", "gpio56";
+                        function = "blsp4_i2c";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+        };
+};
+
+&i2c_1 {
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+
+	lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+		status = "okay";
+	};
+};
+
+&i2c_2 {
+        pinctrl-0 = <&i2c_2_pins>;
+        pinctrl-names = "default";
+        status = "ok";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+	cd-gpios = <&tlmm 62 1>;
+	sd-ldo-gpios = <&tlmm 66 0>;
+	vqmmc-supply = <&ipq6018_l2_corner>;
+	status = "ok";
+};
+
+&soc {
+        leds {
+                compatible = "gpio-leds";
+                pinctrl-0 = <&leds_pins>;
+                pinctrl-names = "default";
+
+                led@60 {
+                        label = "blue:wifi5";
+                        gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_5g";
+                        default-state = "off";
+                };
+                led@61 {
+                        label = "blue:wifi2";
+                        gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_2g";
+                        default-state = "off";
+                };
+        };
+};
+
+&tlmm {
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio61";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-hfcl-ion4x_2.dts

@@ -0,0 +1,155 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-cp01-hfcl.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+
+/ {
+	model = "HFCL ION4X_2";
+	compatible = "hfcl,ion4x_2", "qcom,ipq6018-cp01", "qcom,ipq6018";
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	i2c_1_pins: i2c_1_pins {
+		mux {
+			pins = "gpio42", "gpio43";
+			function = "blsp2_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+	
+	i2c_2_pins: i2c_2_pins {
+                mux {
+                        pins = "gpio55", "gpio56";
+                        function = "blsp4_i2c";
+                        drive-strength = <8>;
+                        bias-pull-down;
+                };
+        };
+};
+
+&i2c_1 {
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+
+	lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+		status = "okay";
+	};
+};
+
+&i2c_2 {
+        pinctrl-0 = <&i2c_2_pins>;
+        pinctrl-names = "default";
+        status = "ok";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+	cd-gpios = <&tlmm 62 1>;
+	sd-ldo-gpios = <&tlmm 66 0>;
+	vqmmc-supply = <&ipq6018_l2_corner>;
+	status = "ok";
+};
+
+&soc {
+        leds {
+                compatible = "gpio-leds";
+                pinctrl-0 = <&leds_pins>;
+                pinctrl-names = "default";
+
+                led@60 {
+                        label = "blue:wifi5";
+                        gpios = <&tlmm 60 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_5g";
+                        default-state = "off";
+                };
+                led@61 {
+                        label = "blue:wifi2";
+                        gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+                        linux,default-trigger = "led_2g";
+                        default-state = "off";
+                };
+        };
+};
+
+&tlmm {
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio61";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-indio-um-310ax-v1.dts

@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Indio UM-310AX V1";
+	compatible = "indio,um-310ax-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp2";
+		ethernet1 = "/soc/dp1";
+
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qpic_pad {
+			pins = "gpio1",  "gpio3",  "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		rst_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	modem_power_pins {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_green {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_red {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio: mdio@90000 {
+		status = "ok";
+
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+
+		ethernet-phy@0 {
+			reg = <0x03>;
+		};
+
+		ethernet-phy@1 {
+			reg = <0x04>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
+		switch_lan_bmp =   <0x10>; /* lan port bitmap */
+		switch_wan_bmp =   <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0x80>; /*inner port bitmap*/
+		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <0x04>;
+				phy_address = <0x03>;
+			};
+
+			port@4 {
+				port_id = <0x05>;
+				phy_address = <0x04>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x04>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x03>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x05>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x04>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_system: system {
+			label = "green:system";
+			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "red:wlan5g";
+			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&cpu0_opp_table {
+	compatible = "operating-points-v2";
+	opp-shared;
+
+	opp03 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <3>;
+		clock-latency-ns = <200000>;
+	};
+
+	/delete-node/ opp04;
+	/delete-node/ opp05;
+	/delete-node/ opp06;
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axm-v1.dts

@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Indio UM-510AXM V1";
+	compatible = "indio,um-510axm-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp2";
+		ethernet1 = "/soc/dp1";
+
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qpic_pad {
+			pins = "gpio1",  "gpio3",  "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		rst_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	modem_power_pins {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_green {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_red {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio: mdio@90000 {
+		status = "ok";
+
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+
+		ethernet-phy@0 {
+			reg = <0x03>;
+		};
+
+		ethernet-phy@1 {
+			reg = <0x04>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
+		switch_lan_bmp =   <0x10>; /* lan port bitmap */
+		switch_wan_bmp =   <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0x80>; /*inner port bitmap*/
+		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <0x04>;
+				phy_address = <0x03>;
+			};
+
+			port@4 {
+				port_id = <0x05>;
+				phy_address = <0x04>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x04>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x03>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x05>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x04>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_system: system {
+			label = "green:system";
+			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "red:wlan5g";
+			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&cpu0_opp_table {
+	compatible = "operating-points-v2";
+	opp-shared;
+
+	opp03 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <3>;
+		clock-latency-ns = <200000>;
+	};
+
+	/delete-node/ opp04;
+	/delete-node/ opp05;
+	/delete-node/ opp06;
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-indio-um-510axp-v1.dts

@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Indio UM-510AXP V1";
+	compatible = "indio,um-510axp-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp2";
+		ethernet1 = "/soc/dp1";
+
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qpic_pad {
+			pins = "gpio1",  "gpio3",  "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		rst_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	modem_power_pins {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_green {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_red {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio: mdio@90000 {
+		status = "ok";
+
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+
+		ethernet-phy@0 {
+			reg = <0x03>;
+		};
+
+		ethernet-phy@1 {
+			reg = <0x04>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
+		switch_lan_bmp =   <0x10>; /* lan port bitmap */
+		switch_wan_bmp =   <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0x80>; /*inner port bitmap*/
+		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <0x04>;
+				phy_address = <0x03>;
+			};
+
+			port@4 {
+				port_id = <0x05>;
+				phy_address = <0x04>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x04>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x03>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x05>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x04>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_system: system {
+			label = "green:system";
+			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "red:wlan5g";
+			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&cpu0_opp_table {
+	compatible = "operating-points-v2";
+	opp-shared;
+
+	opp03 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <3>;
+		clock-latency-ns = <200000>;
+	};
+
+	/delete-node/ opp04;
+	/delete-node/ opp05;
+	/delete-node/ opp06;
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp01.dts

@@ -0,0 +1,23 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-meshpp-s618.dtsi"
+
+/ {
+	model = "MeshPlusPlus, Inc. S618 CP01";
+	compatible = "meshpp,s618-cp01", "qcom,ipq6018-cp01", "qcom,ipq6018";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618-cp03.dts

@@ -0,0 +1,23 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-meshpp-s618.dtsi"
+
+/ {
+	model = "MeshPlusPlus, Inc. S618 CP01";
+	compatible = "meshpp,s618-cp03", "qcom,ipq6018-cp03", "qcom,ipq6018";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-meshpp-s618.dtsi

@@ -0,0 +1,789 @@
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x1A5 0x0>;
+
+	aliases {
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+		ethernet2 = "/soc/dp3";
+		ethernet3 = "/soc/dp4";
+		ethernet4 = "/soc/dp5";
+
+		led-boot = &led_green;
+		led-running = &led_blue;
+		led-upgrade = &led_red;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+                bootargs-append = " console=ttyMSM0,115200n8 panic=10 ubi.mtd=nand root=mtd:ubi_rootfs rootfstype=squashfs swiotlb=1 rootwait";
+#else
+                bootargs-append = " console=ttyMSM0,115200n8 panic=10 ubi.mtd=nand root=mtd:ubi_rootfs rootfstype=squashfs swiotlb=1 coherent_pool=2M rootwait";
+#endif
+	};
+
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+	reserved-memory {
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+#endif
+		qcn9000_pcie0@50200000 {
+			no-map;
+			reg = <0x0 0x50200000 0x0 0x03700000>;
+		};
+
+		mhi_region0: dma_pool0@53900000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x53900000 0x0 0x01800000>;
+		};
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&sd_ldo_pins &generic_gpios &pcie_pins>;
+	pinctrl-names = "default";
+
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sd_ldo_pins: sd_ldo_pins {
+		mux {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_1_pins: spi_1_pins {
+		mux {
+			pins = "gpio69", "gpio71", "gpio72";
+			function = "blsp1_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		spi_cs {
+			pins = "gpio70";
+			function = "blsp1_spi";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		quartz_interrupt {
+			pins = "gpio78";
+			function = "gpio";
+			input;
+			bias-disable;
+		};
+		quartz_reset {
+			pins = "gpio79";
+			function = "gpio";
+			output-low;
+			bias-disable;
+		};
+	};
+
+	button_pins: button_pins {
+		switch_button {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		reset_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+		mux_3 {
+			pins = "gpio77";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_5g {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_2g {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		m2_1_regulator {
+			pins = "gpio29";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		m2_1_pwr_en {
+			pins = "gpio49";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		m2_1_reset_n {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_red: red {
+			pins = "gpio50";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_green: green {
+			pins = "gpio54";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_blue: blue {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	sd_pins: sd_pins {
+		mux_1 {
+			pins = "gpio62";
+			function = "sd_card";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio23";
+			function = "gpio";
+			drive_strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	extcon_usb_pins: extcon_usb_pins {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	generic_gpios: generic_gpios {
+		gpio42 {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	pcie_pins: pcie_pins {
+		pcie0_enable {
+			pins = "gpio34";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+        i2c_2_pins: i2c_2_pins {
+                mux {
+                        pins = "gpio55", "gpio56";
+                        function = "gpio";
+                        drive-strength = <16>;
+                        bias-pull-up;
+                        input-enable;
+                };
+
+                mux_2 {
+                        pins = "gpio48";
+                        function = "gpio";
+                        drive_strength = <16>;
+                        output-high;
+                };
+
+                mux_3 {
+                        pins = "gpio73";
+                        function = "gpio";
+                        drive-stength = <16>;
+                        output-low;
+                };
+        };
+};
+
+&soc {
+	extcon_usb: extcon_usb {
+		pinctrl-0 = <&extcon_usb_pins>;
+		pinctrl-names = "default";
+		id-gpio = <&tlmm 26 GPIO_ACTIVE_LOW>;
+		status = "ok";
+	};
+
+	mdio0: mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0 &tlmm 77 1>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+                phy3: ethernet-phy@3 {
+                        reg = <3>;
+                };
+                phy4: ethernet-phy@4 {
+                        reg = <4>;
+                };
+	};
+
+	ess0: ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x1e>; /* lan port bitmap */
+		switch_wan_bmp = <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@0 {
+				port_id = <1>;
+				phy_address = <0>;
+			};
+			port@1 {
+				port_id = <2>;
+				phy_address = <1>;
+			};
+			port@2 {
+				port_id = <3>;
+				phy_address = <2>;
+			};
+			port@3 {
+				port_id = <4>;
+				phy_address = <3>;
+			};
+			port@4 {
+				port_id = <5>;
+				phy_address = <4>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led@29 {
+			label = "m2_1_regulator";
+			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		led@49 {
+			label = "m2_1_pwr_en";
+			gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		led@32 {
+			label = "m2_1_reset_n";
+			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		led@50 {
+			label = "red";
+			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		led@54 {
+			label = "green";
+			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		led@57 {
+			label = "blue";
+			gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		switch {
+			label = "switch";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	i2c_2: i2c@0 { /* i2c gpio */
+		pinctrl-0 = <&i2c_2_pins>;
+	        pinctrl-names = "default";
+		compatible = "i2c-gpio";
+		gpios = <&tlmm 56 0>, <&tlmm 55 0>;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "ok";
+	};
+
+	wifi3: wifi3@f00000 {
+		qcom,wlan-ramdump-dynamic = <0x400000>;
+		mhi,max-channels = <30>;
+		mhi,timeout = <10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		qrtr_node_id = <0x20>;
+		qca,auto-restart;
+#ifdef __IPQ_MEM_PROFILE_512_MB__
+
+	      /* QCN9000 tgt-mem-mode=1 layout - 30MB
+	       * +=========+==============+=========+
+	       * |  Region | Start Offset |   Size  |
+	       * +---------+--------------+---------+
+	       * | BASE    |  0x4E400000  |   20MB  |
+	       * +---------+--------------+---------+
+	       * | M3 Dump |  0x4F800000  |   1MB   |
+	       * +---------+--------------+---------+
+	       * |  Caldb  |  0x4FA00000  |   8MB   |
+	       * +==================================+
+	       */
+
+		base-addr = <0x4E400000>;
+		m3-dump-addr = <0x4F800000>;
+		qcom,caldb-addr = <0x4FA00000>;
+#else
+
+	      /* QCN9000 tgt-mem-mode=0 layout - 55MB
+	       * +=========+==============+=========+
+	       * |  Region | Start Offset |   Size  |
+	       * +---------+--------------+---------+
+	       * | BASE    |  0x50200000  |   45MB  |
+	       * +---------+--------------+---------+
+	       * | M3 Dump |  0x52F00000  |   1MB   |
+	       * +---------+--------------+---------+
+	       * |  Caldb  |  0x53100000  |   8MB   |
+	       * +==================================+
+	       */
+
+		base-addr = <0x50200000>;
+		m3-dump-addr = <0x52F00000>;
+		qcom,caldb-addr = <0x53100000>;
+#endif
+		status = "ok";
+
+		mhi_channels {
+			mhi_chan@0 {
+				reg = <0>;
+				label = "LOOPBACK";
+				mhi,num-elements = <32>;
+				mhi,event-ring = <1>;
+				mhi,chan-dir = <1>;
+				mhi,data-type = <0>;
+				mhi,doorbell-mode = <2>;
+				mhi,ee = <0x14>;
+			};
+
+			mhi_chan@1 {
+				reg = <1>;
+				label = "LOOPBACK";
+				mhi,num-elements = <32>;
+				mhi,event-ring = <1>;
+				mhi,chan-dir = <2>;
+				mhi,data-type = <0>;
+				mhi,doorbell-mode = <2>;
+				mhi,ee = <0x14>;
+			};
+
+			mhi_chan@4 {
+				reg = <4>;
+				label = "DIAG";
+				mhi,num-elements = <32>;
+				mhi,event-ring = <1>;
+				mhi,chan-dir = <1>;
+				mhi,data-type = <0>;
+				mhi,doorbell-mode = <2>;
+				mhi,ee = <0x14>;
+			};
+
+			mhi_chan@5 {
+				reg = <5>;
+				label = "DIAG";
+				mhi,num-elements = <32>;
+				mhi,event-ring = <1>;
+				mhi,chan-dir = <2>;
+				mhi,data-type = <0>;
+				mhi,doorbell-mode = <2>;
+				mhi,ee = <0x14>;
+			};
+
+			mhi_chan@20 {
+				reg = <20>;
+				label = "IPCR";
+				mhi,num-elements = <32>;
+				mhi,event-ring = <1>;
+				mhi,chan-dir = <1>;
+				mhi,data-type = <1>;
+				mhi,doorbell-mode = <2>;
+				mhi,ee = <0x14>;
+				mhi,auto-start;
+			};
+
+			mhi_chan@21 {
+				reg = <21>;
+				label = "IPCR";
+				mhi,num-elements = <32>;
+				mhi,event-ring = <1>;
+				mhi,chan-dir = <2>;
+				mhi,data-type = <0>;
+				mhi,doorbell-mode = <2>;
+				mhi,ee = <0x14>;
+				mhi,auto-queue;
+				mhi,auto-start;
+			};
+		};
+
+		mhi_events {
+			mhi_event@0 {
+				mhi,num-elements = <32>;
+				mhi,intmod = <1>;
+				mhi,msi = <1>;
+				mhi,priority = <1>;
+				mhi,brstmode = <2>;
+				mhi,data-type = <1>;
+			};
+
+			mhi_event@1 {
+				mhi,num-elements = <256>;
+				mhi,intmod = <1>;
+				mhi,msi = <2>;
+				mhi,priority = <1>;
+				mhi,brstmode = <2>;
+			};
+		};
+
+		mhi_devices {
+			mhi_qrtr {
+				mhi,chan = "IPCR";
+				qcom,net-id = <0>;
+			};
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&CPU0 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+		1608000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU1 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+		1608000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU2 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+		1608000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&CPU3 {
+	operating-points = <
+		/* kHz   uV (fixed) */
+		864000   1100000
+		1056000  1100000
+		1200000  1100000
+		1608000  1100000
+	>;
+	clock-latency = <200000>;
+};
+
+&wifi0 {
+        qcom,board_id = <0x10>;
+        status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+
+	pcie0_rp {
+		reg = <0 0 0 0 0>;
+		status = "ok";
+
+		mhi_0: qcom,mhi@0 {
+			reg = <0 0 0 0 0 >;
+			qrtr_instance_id = <0x20>;
+			qcom,board_id = <0xa4>;
+#if !defined(__IPQ_MEM_PROFILE_256_MB__)
+			memory-region = <&mhi_region0>;
+#endif
+		};
+	};
+};
+
+&pcie_phy {
+        status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v1.dts

@@ -0,0 +1,23 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-pax1800.dtsi"
+
+/ {
+	model = "Plasma Cloud PAX1800 v1";
+	compatible = "plasmacloud,pax1800-v1", "qcom,ipq6018-cp03", "qcom,ipq6018";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800-v2.dts

@@ -0,0 +1,23 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018-pax1800.dtsi"
+
+/ {
+	model = "Plasma Cloud PAX1800 v2";
+	compatible = "plasmacloud,pax1800-v2", "qcom,ipq6018-cp03", "qcom,ipq6018";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-pax1800.dtsi

@@ -0,0 +1,315 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x1A5 0x0>;
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp1";
+		ethernet1 = "/soc/dp2";
+
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_green;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_green;
+		led-uplink = &led_status_blue;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		status_red {
+			label = "red:status";
+			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		led_status_green: status_green {
+			label = "green:status";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: status_blue {
+			label = "blue:status";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	watchdog {
+		compatible = "linux,wdt-gpio";
+		pinctrl-0 = <&watchdog_pins>;
+		pinctrl-names = "default";
+		gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+		hw_algo = "toggle";
+		hw_margin_ms = <2000>;
+		always-running;
+	};
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		reset_button {
+			pins = "gpio24";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: led_pinmux {
+		led_power_green {
+			pins = "gpio25";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_power_blue {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		led_power_red {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	watchdog_pins: watchdog_pinmux {
+		mux {
+			pins = "gpio67";
+			function = "gpio";
+			bias-none;
+			output-low;
+		};
+	};
+};
+
+&soc {
+	mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <3>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <4>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x08>; /* lan port bitmap */
+		switch_wan_bmp = <0x10>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <3>;
+				phy_address = <4>;
+			};
+			port@4 {
+				port_id = <4>;
+				phy_address = <3>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif
+
+&wifi0 {
+	status = "okay";
+	qcom,ath11k-calibration-variant = "PlasmaCloud-PAX1800";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-wallys-dr6018-v4.dts

@@ -82,14 +82,24 @@
 	 */
 
 /* TZAPP is enabled only in default memory profile */
-#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
 	reserved-memory {
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
 		tzapp:tzapp@49B00000 {	/* TZAPPS */
 			no-map;
 			reg = <0x0 0x49B00000 0x0 0x00600000>;
 		};
-	};
 #endif
+		qcn9000_pcie0@50200000 {
+			no-map;
+			reg = <0x0 0x50200000 0x0 0x02D00000>;
+		};
+
+		mhi_region0: dma_pool0@52f00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x52F00000 0x0 0x01800000>;
+		};
+	};
 };
 
 &tlmm {
@@ -490,3 +500,49 @@
 	//vqmmc-supply = <&ipq6018_l2_corner>;
 	status = "ok";
 };
+
+&wifi1 {
+	base-addr = <0x50200000>;
+	m3-dump-addr = <0x52500000>;
+	etr-addr = <0x52600000>;
+	caldb-addr = <0x52700000>;
+	hremote-size = <0x2300000>;
+	tgt-mem-mode = <0x0>;
+	board_id = <0xa4>;
+	caldb-size = <0x800000>;
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+	interrupts = <0 52 0>, <0 416 0>, <0 417 0>,
+                     <0 418 0>, <0 419 0>, <0 420 0>,
+                     <0 421 0>, <0 422 0>, <0 423 0>,
+                     <0 424 0>, <0 425 0>, <0 426 0>,
+                     <0 427 0>, <0 428 0>, <0 429 0>,
+                     <0 430 0>, <0 431 0>;
+
+        interrupt-names = "msi", "msi_0", "msi_1",
+                          "msi_2", "msi_3", "msi_4",
+                          "msi_5", "msi_6", "msi_7",
+                          "msi_8", "msi_9", "msi_10",
+                          "msi_11", "msi_12", "msi_13",
+                          "msi_14", "msi_15";
+
+        qcom,msi-gicm-addr = <0x0B00A040>;
+        qcom,msi-gicm-base = <0x1c0>;
+};
+
+&pcie0_rp {
+        status = "ok";
+
+        mhi_0: qcom,mhi@0 {
+                reg = <0 0 0 0 0 >;
+                qrtr_instance_id = <0x20>;
+                memory-region = <&mhi_region0>;
+        };
+};
+
+&pcie_phy {
+        status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-yuncore-ax840.dts

@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "YunCore AX840";
+	compatible = "yuncore,ax840", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		/* Aliases as required by u-boot to patch MAC addresses */
+		ethernet0 = "/soc/dp2";
+		ethernet1 = "/soc/dp1";
+
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+	};
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		qpic_pad {
+			pins = "gpio1",  "gpio3",  "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		rst_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	modem_power_pins {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+			output-high;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_blue {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_green {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		led_red {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio: mdio@90000 {
+		status = "ok";
+
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+
+		ethernet-phy@0 {
+			reg = <0x03>;
+		};
+
+		ethernet-phy@1 {
+			reg = <0x04>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp =   <0x01>; /* cpu port bitmap */
+		switch_lan_bmp =   <0x10>; /* lan port bitmap */
+		switch_wan_bmp =   <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0x80>; /*inner port bitmap*/
+		switch_mac_mode =  <0x00>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <0x04>;
+				phy_address = <0x03>;
+			};
+
+			port@4 {
+				port_id = <0x05>;
+				phy_address = <0x04>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x04>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x03>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <0x05>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0x00>;
+		local-mac-address = [00 00 00 00 00 00];
+		qcom,link-poll = <0x01>;
+		qcom,phy-mdio-addr = <0x04>;
+		phy-mode = "sgmii";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_system: system {
+			label = "green:system";
+			gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan5g {
+			label = "red:wlan5g";
+			gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+&cpu0_opp_table {
+	compatible = "operating-points-v2";
+	opp-shared;
+
+	opp03 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <3>;
+		clock-latency-ns = <200000>;
+	};
+
+	/delete-node/ opp04;
+	/delete-node/ opp05;
+	/delete-node/ opp06;
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&usb2 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-yuncore-fap650.dts

@@ -0,0 +1,423 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "qcom-ipq6018.dtsi"
+#include "qcom-ipq6018-rpm-regulator.dtsi"
+#include "qcom-ipq6018-cpr-regulator.dtsi"
+#include "qcom-ipq6018-cp-cpu.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <0x2>;
+	#size-cells = <0x2>;
+	model = "Yuncore FAP650";
+	compatible = "yuncore,fap650", "qcom,ipq6018-cp03", "qcom,ipq6018";
+	interrupt-parent = <&intc>;
+	qcom,msm-id = <0x1A5 0x0>;
+
+	aliases {
+		/*
+		 * Aliases as required by u-boot
+		 * to patch MAC addresses
+		 */
+		ethernet0 = "/soc/dp5";
+		ethernet1 = "/soc/dp4";
+		ethernet2 = "/soc/dp3";
+		ethernet3 = "/soc/dp2";
+		ethernet4 = "/soc/dp1";
+
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init";
+#ifdef __IPQ_MEM_PROFILE_256_MB__
+		bootargs-append = " swiotlb=1";
+#else
+		bootargs-append = " swiotlb=1 coherent_pool=2M";
+#endif
+	};
+
+	/*
+	 * +=========+==============+========================+
+	 * |        |              |                         |
+	 * | Region | Start Offset |          Size           |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * | Linux  |  0x41000000  |         139MB           |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * |        |              |                         |
+	 * +--------+--------------+-------------------------+
+	 * | TZ App |  0x49B00000  |           6MB           |
+	 * +--------+--------------+-------------------------+
+	 *
+	 * From the available 145 MB for Linux in the first 256 MB,
+	 * we are reserving 6 MB for TZAPP.
+	 *
+	 * Refer arch/arm64/boot/dts/qcom/qcom-ipq6018-memory.dtsi
+	 * for memory layout.
+	 */
+
+/* TZAPP is enabled only in default memory profile */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+	reserved-memory {
+		tzapp:tzapp@49B00000 {	/* TZAPPS */
+			no-map;
+			reg = <0x0 0x49B00000 0x0 0x00600000>;
+		};
+	};
+#endif
+};
+
+&tlmm {
+	uart_pins: uart_pins {
+		mux {
+			pins = "gpio44", "gpio45";
+			function = "blsp2_uart";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pins {
+		mux {
+			pins = "gpio38", "gpio39", "gpio40", "gpio41";
+			function = "blsp0_spi";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	qpic_pins: qpic_pins {
+		data_0 {
+			pins = "gpio15";
+			function = "qpic_pad0";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_1 {
+			pins = "gpio12";
+			function = "qpic_pad1";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_2 {
+			pins = "gpio13";
+			function = "qpic_pad2";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_3 {
+			pins = "gpio14";
+			function = "qpic_pad3";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_4 {
+			pins = "gpio5";
+			function = "qpic_pad4";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_5 {
+			pins = "gpio6";
+			function = "qpic_pad5";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_6 {
+			pins = "gpio7";
+			function = "qpic_pad6";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		data_7 {
+			pins = "gpio8";
+			function = "qpic_pad7";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+		qpic_pad {
+			pins = "gpio1", "gpio3", "gpio4",
+			       "gpio10", "gpio11", "gpio17";
+			function = "qpic_pad";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		wps_button {
+			pins = "gpio19";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		led_sys {
+			pins = "gpio32";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_5g {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		led_2g {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	mdio@90000 {
+		pinctrl-0 = <&mdio_pins>;
+		pinctrl-names = "default";
+		phy-reset-gpio = <&tlmm 75 0>;
+		status = "ok";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+		};
+		phy4: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+
+	ess-switch@3a000000 {
+		switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
+		switch_lan_bmp = <0x1e>; /* lan port bitmap */
+		switch_wan_bmp = <0x20>; /* wan port bitmap */
+		switch_inner_bmp = <0xc0>; /*inner port bitmap*/
+		switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+		switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+		switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+		qcom,port_phyinfo {
+			port@3 {
+				port_id = <3>;
+				phy_address = <4>;
+			};
+			port@4 {
+				port_id = <4>;
+				phy_address = <3>;
+			};
+		};
+	};
+
+	dp1 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <1>;
+		reg = <0x3a001000 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <0>;
+		phy-mode = "sgmii";
+	};
+
+	dp2 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <2>;
+		reg = <0x3a001200 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <1>;
+		phy-mode = "sgmii";
+	};
+
+	dp3 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <3>;
+		reg = <0x3a001400 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <2>;
+		phy-mode = "sgmii";
+	};
+
+	dp4 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <4>;
+		reg = <0x3a001600 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <3>;
+		phy-mode = "sgmii";
+	};
+
+	dp5 {
+		device_type = "network";
+		compatible = "qcom,nss-dp";
+		qcom,id = <5>;
+		reg = <0x3a001800 0x200>;
+		qcom,mactype = <0>;
+		local-mac-address = [000000000000];
+		qcom,link-poll = <1>;
+		qcom,phy-mdio-addr = <4>;
+		phy-mode = "sgmii";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		led_power: led@32 {
+			label = "green:power";
+			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led@35 {
+			label = "green:wifi5";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@37 {
+			label = "green:wifi2";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&spi_0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "ok";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&qpic_bam {
+	status = "ok";
+};
+
+&nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&usb3 {
+	status = "ok";
+};
+
+&nss_crypto {
+	status = "ok";
+};
+
+/* TZAPP is enabled in default memory profile only */
+#if !defined(__IPQ_MEM_PROFILE_256_MB__) && !defined(__IPQ_MEM_PROFILE_512_MB__)
+&qseecom {
+	mem-start = <0x49B00000>;
+	mem-size = <0x600000>;
+	status = "ok";
+};
+#endif

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-eap102.dts

@@ -50,25 +50,78 @@
 			bootargs-append = " swiotlb=1 coherent_pool=2M";
 		#endif
 	};
+
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		mcu-enable {
+			gpio-export,name = "mcu-enable";
+			gpio-export,output = <0>;
+			gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-hub-enable {
+			gpio-export,name = "usb-hub-enable";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-rear-power {
+			gpio-export,name = "usb-rear-power";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb-side-power {
+			gpio-export,name = "usb-side-power";
+			gpio-export,output = <1>;
+			gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };
 
 &tlmm {
-	pinctrl-0 = <&btcoex_pins>;
+	pinctrl-0 = <&mcu_rst &mcu_rsv &usb_rear_pwr &usb_side_pwr &usb_hub_rst>;
 	pinctrl-names = "default";
 
-	btcoex_pins: btcoex_pins {
-		mux_0 {
-			pins = "gpio64";
-			function = "pta1_1";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "pta1_2";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
+	mcu_rst: mcu_rst_pins {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-low;
+	};
+
+	mcu_rsv: mcu_rsv_pins {
+		pins = "gpio56";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	usb_rear_pwr: usb_rear_pwr_pins {
+		pins = "gpio29";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	usb_side_pwr: usb_side_pwr_pins {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	usb_hub_rst: usb_hub_rst_pins {
+		pins = "gpio55";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
 	};
 
 	mdio_pins: mdio_pinmux {
@@ -172,17 +225,7 @@
 		};
 	};
 
-	hsuart_pins: hsuart_pins {
-		mux {
-			pins = "gpio49";
-			function = "blsp2_uart";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
 	button_pins: button_pins {
-
 		reset_button {
 			pins = "gpio66";
 			function = "gpio";
@@ -220,31 +263,6 @@
 			bias-pull-down;
 		};
 	};
-
-	usb_mux_sel_pins: usb_mux_pins {
-		mux {
-			pins = "gpio27";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
-	pcie0_pins: pcie_pins {
-		pcie0_rst {
-			pins = "gpio58";
-			function = "pcie0_rst";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-		pcie0_wake {
-			pins = "gpio59";
-			function = "pcie0_wake";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
-
 };
 
 &soc {
@@ -733,12 +751,6 @@
 	};
 };
 
-&serial_blsp2 {
-	pinctrl-0 = <&hsuart_pins>;
-	pinctrl-names = "default";
-	status = "ok";
-};
-
 &nss0 {
 	qcom,low-frequency = <187200000>;
 	qcom,mid-frequency = <748800000>;
@@ -812,7 +824,7 @@
 };
 
 &pcie0 {
-	status = "ok";
+	status = "disabled";
 };
 
 &pcie1 {

feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq807x-wf196.dts

@@ -51,10 +51,21 @@
 		#ifdef __IPQ_MEM_PROFILE_256_MB__
 			bootargs-append = " swiotlb=1";
 		#else
-			bootargs-append = " swiotlb=1 coherent_pool=2M";
+			bootargs-append = " swiotlb=1 coherent_pool=2M vmalloc=600M";
 		#endif
 	};
 
+	gpio-export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		mcu-enable {
+			gpio-export,name = "mcu-enable";
+			gpio-export,output = <0>;
+			gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	reserved-memory {
 /* No Pine attach in 256M profile */
 #if !defined(__IPQ_MEM_PROFILE_256_MB__)
@@ -155,28 +166,15 @@
 };
 
 &tlmm {
-	pinctrl-0 = <&btcoex_pins>;
+	pinctrl-0 = <&mcu_rst>;
 	pinctrl-names = "default";
 
-	btcoex_pins: btcoex_pins {
-		mux_0 {
-			pins = "gpio64";
-			function = "pta1_1";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-		mux_1 {
-			pins = "gpio65";
-			function = "pta1_2";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
-		mux_2 {
-			pins = "gpio66";
-			function = "pta1_0";
-			drive-strength = <6>;
-			bias-pull-down;
-		};
+	mcu_rst: mcu_rst_pins {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-low;
 	};
 
 	mdio_pins: mdio_pinmux {
@@ -207,14 +205,15 @@
 			bias-disable;
 		};
 	};
+
 	i2c_5_pins: i2c_5_pinmux {
-                mux {
-                        pins = "gpio0", "gpio2";
-                        function = "blsp5_i2c";
-                        drive-strength = <8>;
-                        bias-disable;
-                };
-        };
+		mux {
+			pins = "gpio0", "gpio2";
+			function = "blsp5_i2c";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
 
 	spi_0_pins: spi_0_pins {
 		mux {
@@ -225,33 +224,6 @@
 		};
 	};
 
-	spi_3_pins: spi_3_pins {
-		mux {
-			pins = "gpio50", "gpio52", "gpio53";
-			function = "blsp3_spi";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		spi_cs {
-			pins = "gpio22";
-			function = "blsp3_spi2";
-			drive-strength = <8>;
-			bias-disable;
-		};
-		quartz_interrupt {
-			pins = "gpio47";
-			function = "gpio";
-			input;
-			bias-disable;
-		};
-		quartz_reset {
-			pins = "gpio21";
-			function = "gpio";
-			output-low;
-			bias-disable;
-		};
-	};
-
 	qpic_pins: qpic_pins {
 		data_0 {
 			pins = "gpio15";
@@ -312,7 +284,7 @@
 
 	hsuart_pins: hsuart_pins {
 		mux {
-			pins = "gpio46", "gpio47", "gpio48", "gpio49";
+			pins = "gpio48", "gpio49";
 			function = "blsp2_uart";
 			drive-strength = <8>;
 			bias-disable;
@@ -320,7 +292,6 @@
 	};
 
 	button_pins: button_pins {
-
 		wps_button {
 			pins = "gpio67";
 			function = "gpio";
@@ -366,24 +337,24 @@
 			bias-pull-down;
 		};
 	};
-	pwm_pins: pwm_pinmux {
-                mux_1 {
-                        pins = "gpio25";
-                        function = "pwm02";
-                        drive-strength = <8>;
-                };
-		mux_2 {
-                        pins = "gpio26";
-                        function = "pwm12";
-                        drive-strength = <8>;
-                };
-		mux_3 {
-                        pins = "gpio27";
-                        function = "pwm22";
-                        drive-strength = <8>;
-                };
-	};
 
+	pwm_pins: pwm_pinmux {
+		mux_1 {
+			pins = "gpio25";
+			function = "pwm02";
+			drive-strength = <8>;
+		};
+		mux_2 {
+			pins = "gpio26";
+			function = "pwm12";
+			drive-strength = <8>;
+		};
+		mux_3 {
+			pins = "gpio27";
+			function = "pwm22";
+			drive-strength = <8>;
+		};
+	};
 };
 
 &soc {

feeds/ipq807x/ipq807x/image/ipq50xx.mk

@@ -18,6 +18,35 @@ define Device/edgecore_eap104
 endef
 TARGET_DEVICES += edgecore_eap104
 
+define Device/liteon_wpx8324
+  DEVICE_TITLE := Liteon WPX8324
+  DEVICE_DTS := qcom-ipq5018-liteon-wpx8324
+  SUPPORTED_DEVICES := liteon,wpx8324
+  DEVICE_PACKAGES := ath11k-wifi-liteon-wpx8324 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+endef
+TARGET_DEVICES += liteon_wpx8324
+
+define Device/muxi_ap3220l
+  DEVICE_TITLE := MUXI AP3220L
+  DEVICE_DTS := qcom-ipq5018-muxi-ap3220l
+  SUPPORTED_DEVICES := muxi,ap3220l
+  DEVICE_PACKAGES := ath11k-wifi-muxi-ap3220l ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+endef
+TARGET_DEVICES += muxi_ap3220l
+
+define Device/motorola_q14
+  DEVICE_TITLE := Motorola Q14
+  DEVICE_DTS := qcom-ipq5018-q14
+  SUPPORTED_DEVICES := motorola,q14
+  DEVICE_PACKAGES := ath11k-wifi-motorola-q14 ath11k-firmware-ipq50xx-spruce ath11k-firmware-qcn6122
+  DEVICE_DTS_CONFIG := config@mp03.5-c1
+  IMAGES := sysupgrade.tar mmc-factory.bin
+  IMAGE/mmc-factory.bin := append-ubi | qsdk-ipq-factory-mmc
+endef
+TARGET_DEVICES += motorola_q14
+
 define Device/qcom_mp03_1
   DEVICE_TITLE := Qualcomm Maple 03.1
   DEVICE_DTS := qcom-ipq5018-mp03.1

feeds/ipq807x/ipq807x/image/ipq60xx.mk

@@ -1,15 +1,17 @@
 KERNEL_LOADADDR := 0x41008000
 
-define Device/cig_wf188
-  DEVICE_TITLE := Cigtech WF-188
-  DEVICE_DTS := qcom-ipq6018-cig-wf188
-  DEVICE_DTS_CONFIG := config@cp03-c1
-  SUPPORTED_DEVICES := cig,wf188
-  IMAGES := sysupgrade.tar
-  IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-  DEVICE_PACKAGES := ath11k-wifi-cig-wf188 uboot-env
+DEVICE_VARS += CE_TYPE
+
+define Device/cig_wf660a
+  DEVICE_TITLE := Cigtech WF-660a
+  DEVICE_DTS := qcom-ipq6018-cig-wf660a
+  SUPPORTED_DEVICES := cig,wf660a
+  DEVICE_DTS_CONFIG := config@cp01-c1
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf660a uboot-env uboot-envtools
+  IMAGES := sysupgrade.tar mmc-factory.bin
+  IMAGE/mmc-factory.bin := append-ubi | qsdk-ipq-factory-mmc
 endef
-TARGET_DEVICES += cig_wf188
+TARGET_DEVICES += cig_wf660a
 
 define Device/cig_wf188n
   DEVICE_TITLE := Cigtech WF-188n
@@ -29,12 +31,30 @@ define Device/hfcl_ion4xe
 endef
 TARGET_DEVICES += hfcl_ion4xe
 
+define Device/hfcl_ion4x
+  DEVICE_TITLE := HFCL ION4X
+  DEVICE_DTS := qcom-ipq6018-hfcl-ion4x
+  DEVICE_DTS_CONFIG := config@cp01-c1
+  SUPPORTED_DEVICES := hfcl,ion4x
+  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-envtools
+endef
+TARGET_DEVICES += hfcl_ion4x
+
+define Device/hfcl_ion4x_2
+  DEVICE_TITLE := HFCL ION4X_2
+  DEVICE_DTS := qcom-ipq6018-hfcl-ion4x_2
+  DEVICE_DTS_CONFIG := config@cp01-c1
+  SUPPORTED_DEVICES := hfcl,ion4x_2
+  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-envtools
+endef
+TARGET_DEVICES += hfcl_ion4x_2
+
 define Device/hfcl_ion4xi
   DEVICE_TITLE := HFCL ION4Xi
   DEVICE_DTS := qcom-ipq6018-hfcl-ion4xi
   DEVICE_DTS_CONFIG := config@cp01-c1
   SUPPORTED_DEVICES := hfcl,ion4xi
-  DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018 uboot-envtools
+  DEVICE_PACKAGES := ath11k-wifi-hfcl-ion4xi uboot-envtools
 endef
 TARGET_DEVICES += hfcl_ion4xi
 
@@ -43,16 +63,43 @@ define Device/edgecore_eap101
   DEVICE_DTS := qcom-ipq6018-edgecore-eap101
   DEVICE_DTS_CONFIG := config@cp01-c1
   SUPPORTED_DEVICES := edgecore,eap101
-  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap101 uboot-envtools
+  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap101 uboot-envtools -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3 kmod-usb2
 endef
 TARGET_DEVICES += edgecore_eap101
 
+define Device/indio_um-310ax-v1
+  DEVICE_TITLE := Indio UM-310AX V1
+  DEVICE_DTS := qcom-ipq6018-indio-um-310ax-v1
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := indio,um-310ax-v1
+  DEVICE_PACKAGES := ath11k-wifi-indio-um-310ax-v1 uboot-env
+endef
+TARGET_DEVICES += indio_um-310ax-v1
+
+define Device/indio_um-510axp-v1
+  DEVICE_TITLE := Indio UM-510AXP V1
+  DEVICE_DTS := qcom-ipq6018-indio-um-510axp-v1
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := indio,um-510axp-v1
+  DEVICE_PACKAGES := ath11k-wifi-indio-um-510axp-v1 uboot-env
+endef
+TARGET_DEVICES += indio_um-510axp-v1
+
+define Device/indio_um-510axm-v1
+  DEVICE_TITLE := Indio UM-510AXM V1
+  DEVICE_DTS := qcom-ipq6018-indio-um-510axm-v1
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := indio,um-510axm-v1
+  DEVICE_PACKAGES := ath11k-wifi-indio-um-510axm-v1 uboot-env
+endef
+TARGET_DEVICES += indio_um-510axm-v1
+
 define Device/wallys_dr6018
   DEVICE_TITLE := Wallys DR6018
   DEVICE_DTS := qcom-ipq6018-wallys-dr6018
   DEVICE_DTS_CONFIG := config@cp01-c4
   SUPPORTED_DEVICES := wallys,dr6018
-  DEVICE_PACKAGES := ath11k-wifi-wallys-dr6018 uboot-envtools
+  DEVICE_PACKAGES := ath11k-wifi-wallys-dr6018 uboot-envtools -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3 kmod-usb2
 endef
 TARGET_DEVICES += wallys_dr6018
 
@@ -61,7 +108,7 @@ define Device/wallys_dr6018_v4
   DEVICE_DTS := qcom-ipq6018-wallys-dr6018-v4
   DEVICE_DTS_CONFIG := config@cp01-c4
   SUPPORTED_DEVICES := wallys,dr6018-v4
-  DEVICE_PACKAGES := ath11k-wifi-wallys-dr6018-v4 uboot-envtools
+  DEVICE_PACKAGES := ath11k-wifi-wallys-dr6018-v4 uboot-envtools ath11k-firmware-qcn9000
 endef
 TARGET_DEVICES += wallys_dr6018_v4
 
@@ -72,3 +119,90 @@ define Device/qcom_cp01_c1
   DEVICE_PACKAGES := ath11k-wifi-qcom-ipq6018
 endef
 TARGET_DEVICES += qcom_cp01_c1
+
+define Device/glinet_ax1800
+  DEVICE_TITLE := GL-iNet AX1800
+  DEVICE_DTS := qcom-ipq6018-gl-ax1800
+  SUPPORTED_DEVICES := glinet,ax1800
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-gl-ax1800 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
+endef
+TARGET_DEVICES += glinet_ax1800
+
+define Device/glinet_axt1800
+  DEVICE_TITLE := GL-iNet AXT1800
+  DEVICE_DTS := qcom-ipq6018-gl-axt1800
+  SUPPORTED_DEVICES := glinet,axt1800
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-gl-axt1800 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
+endef
+TARGET_DEVICES += glinet_axt1800
+
+define Device/yuncore_ax840
+  DEVICE_TITLE := YunCore AX840
+  DEVICE_DTS := qcom-ipq6018-yuncore-ax840
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  SUPPORTED_DEVICES := yuncore,ax840
+  DEVICE_PACKAGES := ath11k-wifi-yuncore-ax840 uboot-env
+endef
+TARGET_DEVICES += yuncore_ax840
+
+define Device/plasmacloud_common_64k
+  DEVICE_PACKAGES := uboot-envtools
+  CE_TYPE :=
+  BLOCKSIZE := 64k
+  IMAGES := sysupgrade.tar factory.bin
+  IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=$$$$(CE_TYPE)
+  IMAGE/sysupgrade.tar := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+  KERNEL += | pad-to $$(BLOCKSIZE)
+endef
+
+define Device/plasmacloud_pax1800-v1
+  $(Device/plasmacloud_common_64k)
+  DEVICE_TITLE := Plasma Cloud PAX1800 v1
+  DEVICE_DTS := qcom-ipq6018-pax1800-v1
+  SUPPORTED_DEVICES := plasmacloud,pax1800-v1
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  CE_TYPE := PAX1800
+  DEVICE_PACKAGES += ath11k-wifi-plasmacloud-pax1800
+endef
+TARGET_DEVICES += plasmacloud_pax1800-v1
+
+define Device/plasmacloud_pax1800-v2
+  $(Device/plasmacloud_common_64k)
+  DEVICE_TITLE := Plasma Cloud PAX1800 v2
+  DEVICE_DTS := qcom-ipq6018-pax1800-v2
+  SUPPORTED_DEVICES := plasmacloud,pax1800-v2
+  DEVICE_DTS_CONFIG := config@plasmacloud.pax1800v2
+  CE_TYPE := PAX1800v2
+  DEVICE_PACKAGES += ath11k-wifi-plasmacloud-pax1800
+endef
+TARGET_DEVICES += plasmacloud_pax1800-v2
+
+define Device/meshpp_s618_cp03
+  DEVICE_TITLE := S618 cp03
+  DEVICE_DTS := qcom-ipq6018-meshpp-s618-cp03
+  SUPPORTED_DEVICES := meshpp,s618-cp03
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
+endef
+TARGET_DEVICES += meshpp_s618_cp03
+
+define Device/meshpp_s618_cp01
+  DEVICE_TITLE := S618 cp01
+  DEVICE_DTS := qcom-ipq6018-meshpp-s618-cp01
+  SUPPORTED_DEVICES := meshpp,s618-cp01
+  DEVICE_DTS_CONFIG := config@cp01-c1
+  DEVICE_PACKAGES := ath11k-wifi-meshpp-s618 -kmod-usb-dwc3-of-simple kmod-usb-dwc3-qcom kmod-usb3
+endef
+TARGET_DEVICES += meshpp_s618_cp01
+
+define Device/yuncore_fap650
+  DEVICE_TITLE := YunCore FAP 650
+  DEVICE_DTS := qcom-ipq6018-yuncore-fap650
+  SUPPORTED_DEVICES := yuncore,fap650
+  DEVICE_DTS_CONFIG := config@cp03-c1
+  DEVICE_PACKAGES := ath11k-wifi-yuncore-fap650
+endef
+TARGET_DEVICES += yuncore_fap650
+

feeds/ipq807x/ipq807x/image/ipq807x.mk

@@ -36,22 +36,39 @@ define Device/cig_wf194c4
 endef
 TARGET_DEVICES += cig_wf194c4
 
-define Device/cig_wf196
-  DEVICE_TITLE := CIG WF196
+define Device/cig_wf196_us
+  DEVICE_TITLE := CIG WF196 (US)
   DEVICE_DTS := qcom-ipq807x-wf196
   DEVICE_DTS_CONFIG=config@hk14
   SUPPORTED_DEVICES := cig,wf196
-  DEVICE_PACKAGES := ath11k-wifi-cig-wf196 aq-fw-download uboot-envtools kmod-usb3 kmod-usb2 \
-  	ath11k-firmware-qcn9000 ath11k-wifi-cig-wf196_6g
+  BLOCKSIZE := 256k
+  PAGESIZE := 4096
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf196-us aq-fw-download uboot-envtools kmod-usb3 kmod-usb2 \
+	ath11k-firmware-qcn9000 ath11k-wifi-cig-wf196_6g-us \
+	zephyr-v3.3.x-hci_uart-cig_wf196_nrf52833
 endef
-TARGET_DEVICES += cig_wf196
+TARGET_DEVICES += cig_wf196_us
+
+define Device/cig_wf196_ca
+  DEVICE_TITLE := CIG WF196 (CA)
+  DEVICE_DTS := qcom-ipq807x-wf196
+  DEVICE_DTS_CONFIG=config@hk14
+  SUPPORTED_DEVICES := cig,wf196
+  BLOCKSIZE := 256k
+  PAGESIZE := 4096
+  DEVICE_PACKAGES := ath11k-wifi-cig-wf196-ca aq-fw-download uboot-envtools kmod-usb3 kmod-usb2 \
+	ath11k-firmware-qcn9000 ath11k-wifi-cig-wf196_6g-ca \
+	zephyr-v3.3.x-hci_uart-cig_wf196_nrf52833
+endef
+TARGET_DEVICES += cig_wf196_ca
 
 define Device/edgecore_eap102
   DEVICE_TITLE := Edgecore EAP102
   DEVICE_DTS := qcom-ipq807x-eap102
   DEVICE_DTS_CONFIG=config@ac02
   SUPPORTED_DEVICES := edgecore,eap102
-  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap102 kmod-usb2 kmod-usb3 uboot-envtools
+  DEVICE_PACKAGES := ath11k-wifi-edgecore-eap102 kmod-usb2 kmod-usb3 uboot-envtools \
+	zephyr-v3.3.x-hci_usb-edgecore_eap102_nrf52840
 endef
 TARGET_DEVICES += edgecore_eap102
 

feeds/ipq807x/ipq807x/modules.mk

@@ -111,3 +111,22 @@ define KernelPackage/diag-char/description
 endef
 
 $(eval $(call KernelPackage,diag-char))
+
+define KernelPackage/usb-dwc3-qcom
+  TITLE:=DWC3 Qualcomm USB driver
+  DEPENDS:=@(!LINUX_4_14) @TARGET_ipq807x +kmod-usb-dwc3
+  KCONFIG:= CONFIG_USB_DWC3_QCOM
+  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko \
+        $(LINUX_DIR)/drivers/usb/dwc3/dbm.ko
+  AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom dbm,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-qcom/description
+ Some Qualcomm SoCs use DesignWare Core IP for USB2/3 functionality.
+ This driver also handles Qscratch wrapper which is needed for
+ peripheral mode support.
+endef
+
+
+$(eval $(call KernelPackage,usb-dwc3-qcom))

feeds/ipq807x/ipq807x/patches/001-backport_kbuild_fix.patch

@@ -0,0 +1,25 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -96,10 +96,10 @@ obj-dirs	:= $(addprefix $(obj)/,$(obj-di
+ # Note: Files that end up in two or more modules are compiled without the
+ #       KBUILD_MODNAME definition. The reason is that any made-up name would
+ #       differ in different configs.
+-name-fix = $(subst $(comma),_,$(subst -,_,$1))
+-basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
++name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
++basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
+ modname_flags  = $(if $(filter 1,$(words $(modname))),\
+-                 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
++                 -DKBUILD_MODNAME=$(call name-fix,$(modname)))
+ 
+ orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
+                  $(ccflags-y) $(CFLAGS_$(basetarget).o)
+@@ -155,7 +155,7 @@ endif
+ 
+ c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+ 		 $(__c_flags) $(modkern_cflags)                           \
+-		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
++		 $(basename_flags) $(modname_flags)
+ 
+ a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
+ 		 $(__a_flags) $(modkern_aflags)

feeds/ipq807x/ipq807x/patches/200-bpf_backport.patch

@@ -32856,7 +32856,7 @@
 +
 +	new_range = dst_reg->off;
 +	if (range_right_open)
-+		new_range--;
++		new_range++;
 +
 +	/* Examples for register markings:
 +	 *

feeds/ipq807x/ipq807x/patches/210-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch

@@ -0,0 +1,88 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Mon, 8 Feb 2021 11:34:08 -0800
+Subject: [PATCH] net: extract napi poll functionality to __napi_poll()
+
+This commit introduces a new function __napi_poll() which does the main
+logic of the existing napi_poll() function, and will be called by other
+functions in later commits.
+This idea and implementation is done by Felix Fietkau <nbd@nbd.name> and
+is proposed as part of the patch to move napi work to work_queue
+context.
+This commit by itself is a code restructure.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: Wei Wang <weiwan@google.com>
+Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -6322,15 +6322,10 @@ void netif_napi_del(struct napi_struct *
+ }
+ EXPORT_SYMBOL(netif_napi_del);
+ 
+-static int napi_poll(struct napi_struct *n, struct list_head *repoll)
++static int __napi_poll(struct napi_struct *n, bool *repoll)
+ {
+-	void *have;
+ 	int work, weight;
+ 
+-	list_del_init(&n->poll_list);
+-
+-	have = netpoll_poll_lock(n);
+-
+ 	weight = n->weight;
+ 
+ 	/* This NAPI_STATE_SCHED test is for avoiding a race
+@@ -6348,7 +6343,7 @@ static int napi_poll(struct napi_struct
+ 	WARN_ON_ONCE(work > weight);
+ 
+ 	if (likely(work < weight))
+-		goto out_unlock;
++		return work;
+ 
+ 	/* Drivers must not modify the NAPI state if they
+ 	 * consume the entire weight.  In such cases this code
+@@ -6357,7 +6352,7 @@ static int napi_poll(struct napi_struct
+ 	 */
+ 	if (unlikely(napi_disable_pending(n))) {
+ 		napi_complete(n);
+-		goto out_unlock;
++		return work;
+ 	}
+ 
+ 	if (n->gro_bitmask) {
+@@ -6375,12 +6370,29 @@ static int napi_poll(struct napi_struct
+ 	if (unlikely(!list_empty(&n->poll_list))) {
+ 		pr_warn_once("%s: Budget exhausted after napi rescheduled\n",
+ 			     n->dev ? n->dev->name : "backlog");
+-		goto out_unlock;
++		return work;
+ 	}
+ 
+-	list_add_tail(&n->poll_list, repoll);
++	*repoll = true;
++
++	return work;
++}
++
++static int napi_poll(struct napi_struct *n, struct list_head *repoll)
++{
++	bool do_repoll = false;
++	void *have;
++	int work;
++
++	list_del_init(&n->poll_list);
++
++	have = netpoll_poll_lock(n);
++
++	work = __napi_poll(n, &do_repoll);
++
++	if (do_repoll)
++		list_add_tail(&n->poll_list, repoll);
+ 
+-out_unlock:
+ 	netpoll_poll_unlock(have);
+ 
+ 	return work;

feeds/ipq807x/ipq807x/patches/211-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch

@@ -0,0 +1,245 @@
+From: Wei Wang <weiwan@google.com>
+Date: Mon, 8 Feb 2021 11:34:09 -0800
+Subject: [PATCH] net: implement threaded-able napi poll loop support
+
+This patch allows running each napi poll loop inside its own
+kernel thread.
+The kthread is created during netif_napi_add() if dev->threaded
+is set. And threaded mode is enabled in napi_enable(). We will
+provide a way to set dev->threaded and enable threaded mode
+without a device up/down in the following patch.
+
+Once that threaded mode is enabled and the kthread is
+started, napi_schedule() will wake-up such thread instead
+of scheduling the softirq.
+
+The threaded poll loop behaves quite likely the net_rx_action,
+but it does not have to manipulate local irqs and uses
+an explicit scheduling point based on netdev_budget.
+
+Co-developed-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
+Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
+Co-developed-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Wei Wang <weiwan@google.com>
+Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -319,6 +319,7 @@ struct napi_struct {
+ 	struct list_head	dev_list;
+ 	struct hlist_node	napi_hash_node;
+ 	unsigned int		napi_id;
++	struct task_struct	*thread;
+ };
+ 
+ enum {
+@@ -326,6 +327,7 @@ enum {
+ 	NAPI_STATE_DISABLE,	/* Disable pending */
+ 	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
+ 	NAPI_STATE_HASHED,	/* In NAPI hash */
++	NAPI_STATE_THREADED,	/* The poll is performed inside its own thread*/
+ };
+ 
+ enum gro_result {
+@@ -501,13 +503,7 @@ void napi_disable(struct napi_struct *n)
+  * Resume NAPI from being scheduled on this context.
+  * Must be paired with napi_disable.
+  */
+-static inline void napi_enable(struct napi_struct *n)
+-{
+-	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
+-	smp_mb__before_atomic();
+-	clear_bit(NAPI_STATE_SCHED, &n->state);
+-	clear_bit(NAPI_STATE_NPSVC, &n->state);
+-}
++void napi_enable(struct napi_struct *n);
+ 
+ /**
+  *	napi_synchronize - wait until NAPI is not running
+@@ -1573,6 +1569,8 @@ enum netdev_priv_flags_ext {
+  *			switch driver and used to set the phys state of the
+  *			switch port.
+  *
++ *	@threaded:	napi threaded mode is enabled
++ *
+  *	FIXME: cleanup struct net_device such that network protocol info
+  *	moves out.
+  */
+@@ -1852,6 +1850,7 @@ struct net_device {
+ 	struct phy_device *phydev;
+ 	struct lock_class_key *qdisc_tx_busylock;
+ 	bool proto_down;
++	unsigned		threaded:1;
+ };
+ #define to_net_dev(d) container_of(d, struct net_device, dev)
+ 
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -94,6 +94,7 @@
+ #include <linux/ethtool.h>
+ #include <linux/notifier.h>
+ #include <linux/skbuff.h>
++#include <linux/kthread.h>
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
+@@ -1304,6 +1305,27 @@ void netdev_notify_peers(struct net_devi
+ }
+ EXPORT_SYMBOL(netdev_notify_peers);
+ 
++static int napi_threaded_poll(void *data);
++
++static int napi_kthread_create(struct napi_struct *n)
++{
++	int err = 0;
++
++	/* Create and wake up the kthread once to put it in
++	 * TASK_INTERRUPTIBLE mode to avoid the blocked task
++	 * warning and work with loadavg.
++	 */
++	n->thread = kthread_run(napi_threaded_poll, n, "napi/%s-%d",
++				n->dev->name, n->napi_id);
++	if (IS_ERR(n->thread)) {
++		err = PTR_ERR(n->thread);
++		pr_err("kthread_run failed with err %d\n", err);
++		n->thread = NULL;
++	}
++
++	return err;
++}
++
+ static int __dev_open(struct net_device *dev)
+ {
+ 	const struct net_device_ops *ops = dev->netdev_ops;
+@@ -3248,6 +3270,21 @@ int weight_p __read_mostly = 64;
+ static inline void ____napi_schedule(struct softnet_data *sd,
+ 				     struct napi_struct *napi)
+ {
++	struct task_struct *thread;
++
++	if (test_bit(NAPI_STATE_THREADED, &napi->state)) {
++		/* Paired with smp_mb__before_atomic() in
++		 * napi_enable(). Use READ_ONCE() to guarantee
++		 * a complete read on napi->thread. Only call
++		 * wake_up_process() when it's not NULL.
++		 */
++		thread = READ_ONCE(napi->thread);
++		if (thread) {
++			wake_up_process(thread);
++			return;
++		}
++	}
++
+ 	list_add_tail(&napi->poll_list, &sd->poll_list);
+ 	__raise_softirq_irqoff(NET_RX_SOFTIRQ);
+ }
+@@ -4828,9 +4865,33 @@ void netif_napi_add(struct net_device *d
+ 	napi->poll_owner = -1;
+ #endif
+ 	set_bit(NAPI_STATE_SCHED, &napi->state);
++	/* Create kthread for this napi if dev->threaded is set.
++	 * Clear dev->threaded if kthread creation failed so that
++	 * threaded mode will not be enabled in napi_enable().
++	 */
++	if (dev->threaded && napi_kthread_create(napi))
++		dev->threaded = 0;
+ }
+ EXPORT_SYMBOL(netif_napi_add);
+ 
++/**
++ *	napi_enable - enable NAPI scheduling
++ *	@n: NAPI context
++ *
++ * Resume NAPI from being scheduled on this context.
++ * Must be paired with napi_disable.
++ */
++void napi_enable(struct napi_struct *n)
++{
++	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
++	smp_mb__before_atomic();
++	clear_bit(NAPI_STATE_SCHED, &n->state);
++	clear_bit(NAPI_STATE_NPSVC, &n->state);
++	if (n->dev->threaded && n->thread)
++		set_bit(NAPI_STATE_THREADED, &n->state);
++}
++EXPORT_SYMBOL(napi_enable);
++
+ void napi_disable(struct napi_struct *n)
+ {
+ 	might_sleep();
+@@ -4844,6 +4905,7 @@ void napi_disable(struct napi_struct *n)
+ 	hrtimer_cancel(&n->timer);
+ 
+ 	clear_bit(NAPI_STATE_DISABLE, &n->state);
++	clear_bit(NAPI_STATE_THREADED, &n->state);
+ }
+ EXPORT_SYMBOL(napi_disable);
+ 
+@@ -4855,6 +4917,11 @@ void netif_napi_del(struct napi_struct *
+ 	kfree_skb_list(napi->gro_list);
+ 	napi->gro_list = NULL;
+ 	napi->gro_count = 0;
++
++	if (napi->thread) {
++		kthread_stop(napi->thread);
++		napi->thread = NULL;
++	}
+ }
+ EXPORT_SYMBOL(netif_napi_del);
+ 
+@@ -4940,6 +5007,50 @@ static int napi_poll(struct napi_struct
+ 	return work;
+ }
+ 
++static int napi_thread_wait(struct napi_struct *napi)
++{
++	set_current_state(TASK_INTERRUPTIBLE);
++
++	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
++		if (test_bit(NAPI_STATE_SCHED, &napi->state)) {
++			WARN_ON(!list_empty(&napi->poll_list));
++			__set_current_state(TASK_RUNNING);
++			return 0;
++		}
++
++		schedule();
++		set_current_state(TASK_INTERRUPTIBLE);
++	}
++	__set_current_state(TASK_RUNNING);
++	return -1;
++}
++
++static int napi_threaded_poll(void *data)
++{
++	struct napi_struct *napi = data;
++	void *have;
++
++	while (!napi_thread_wait(napi)) {
++		for (;;) {
++			bool repoll = false;
++
++			local_bh_disable();
++
++			have = netpoll_poll_lock(napi);
++			__napi_poll(napi, &repoll);
++			netpoll_poll_unlock(have);
++
++			local_bh_enable();
++
++			if (!repoll)
++				break;
++
++			cond_resched();
++		}
++	}
++	return 0;
++}
++
+ static void net_rx_action(struct softirq_action *h)
+ {
+ 	struct softnet_data *sd = this_cpu_ptr(&softnet_data);

feeds/ipq807x/ipq807x/patches/212-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch

@@ -0,0 +1,156 @@
+From: Wei Wang <weiwan@google.com>
+Date: Mon, 8 Feb 2021 11:34:10 -0800
+Subject: [PATCH] net: add sysfs attribute to control napi threaded mode
+
+This patch adds a new sysfs attribute to the network device class.
+Said attribute provides a per-device control to enable/disable the
+threaded mode for all the napi instances of the given network device,
+without the need for a device up/down.
+User sets it to 1 or 0 to enable or disable threaded mode.
+Note: when switching between threaded and the current softirq based mode
+for a napi instance, it will not immediately take effect if the napi is
+currently being polled. The mode switch will happen for the next time
+napi_schedule() is called.
+
+Co-developed-by: Paolo Abeni <pabeni@redhat.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Co-developed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
+Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
+Co-developed-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: Wei Wang <weiwan@google.com>
+Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -496,6 +496,8 @@ void napi_hash_del(struct napi_struct *n
+  */
+ void napi_disable(struct napi_struct *n);
+ 
++int dev_set_threaded(struct net_device *dev, bool threaded);
++
+ /**
+  *	napi_enable - enable NAPI scheduling
+  *	@n: napi context
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -3274,8 +3274,9 @@ static inline void ____napi_schedule(str
+ 
+ 	if (test_bit(NAPI_STATE_THREADED, &napi->state)) {
+ 		/* Paired with smp_mb__before_atomic() in
+-		 * napi_enable(). Use READ_ONCE() to guarantee
+-		 * a complete read on napi->thread. Only call
++		 * napi_enable()/dev_set_threaded().
++		 * Use READ_ONCE() to guarantee a complete
++		 * read on napi->thread. Only call
+ 		 * wake_up_process() when it's not NULL.
+ 		 */
+ 		thread = READ_ONCE(napi->thread);
+@@ -4844,6 +4845,49 @@ static enum hrtimer_restart napi_watchdo
+ 	return HRTIMER_NORESTART;
+ }
+ 
++int dev_set_threaded(struct net_device *dev, bool threaded)
++{
++	struct napi_struct *napi;
++	int err = 0;
++
++	if (dev->threaded == threaded)
++		return 0;
++
++	if (threaded) {
++		list_for_each_entry(napi, &dev->napi_list, dev_list) {
++			if (!napi->thread) {
++				err = napi_kthread_create(napi);
++				if (err) {
++					threaded = false;
++					break;
++				}
++			}
++		}
++	}
++
++	dev->threaded = threaded;
++
++	/* Make sure kthread is created before THREADED bit
++	 * is set.
++	 */
++	smp_mb__before_atomic();
++
++	/* Setting/unsetting threaded mode on a napi might not immediately
++	 * take effect, if the current napi instance is actively being
++	 * polled. In this case, the switch between threaded mode and
++	 * softirq mode will happen in the next round of napi_schedule().
++	 * This should not cause hiccups/stalls to the live traffic.
++	 */
++	list_for_each_entry(napi, &dev->napi_list, dev_list) {
++		if (threaded)
++			set_bit(NAPI_STATE_THREADED, &napi->state);
++		else
++			clear_bit(NAPI_STATE_THREADED, &napi->state);
++	}
++
++	return err;
++}
++
+ void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
+ 		    int (*poll)(struct napi_struct *, int), int weight)
+ {
+--- a/net/core/net-sysfs.c
++++ b/net/core/net-sysfs.c
+@@ -486,6 +486,45 @@ static ssize_t phys_switch_id_show(struc
+ }
+ static DEVICE_ATTR_RO(phys_switch_id);
+ 
++static ssize_t threaded_show(struct device *dev,
++			     struct device_attribute *attr, char *buf)
++{
++	struct net_device *netdev = to_net_dev(dev);
++	ssize_t ret = -EINVAL;
++
++	if (!rtnl_trylock())
++		return restart_syscall();
++
++	if (dev_isalive(netdev))
++		ret = sprintf(buf, fmt_dec, netdev->threaded);
++
++	rtnl_unlock();
++	return ret;
++}
++
++static int modify_napi_threaded(struct net_device *dev, unsigned long val)
++{
++	int ret;
++
++	if (list_empty(&dev->napi_list))
++		return -EOPNOTSUPP;
++
++	if (val != 0 && val != 1)
++		return -EOPNOTSUPP;
++
++	ret = dev_set_threaded(dev, val);
++
++	return ret;
++}
++
++static ssize_t threaded_store(struct device *dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t len)
++{
++	return netdev_store(dev, attr, buf, len, modify_napi_threaded);
++}
++static DEVICE_ATTR_RW(threaded);
++
+ static struct attribute *net_class_attrs[] = {
+ 	&dev_attr_netdev_group.attr,
+ 	&dev_attr_type.attr,
+@@ -514,6 +553,7 @@ static struct attribute *net_class_attrs
+ 	&dev_attr_phys_port_name.attr,
+ 	&dev_attr_phys_switch_id.attr,
+ 	&dev_attr_proto_down.attr,
++	&dev_attr_threaded.attr,
+ 	NULL,
+ };
+ ATTRIBUTE_GROUPS(net_class);

feeds/ipq807x/ipq807x/patches/213-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch

@@ -0,0 +1,118 @@
+From: Wei Wang <weiwan@google.com>
+Date: Mon, 1 Mar 2021 17:21:13 -0800
+Subject: [PATCH] net: fix race between napi kthread mode and busy poll
+
+Currently, napi_thread_wait() checks for NAPI_STATE_SCHED bit to
+determine if the kthread owns this napi and could call napi->poll() on
+it. However, if socket busy poll is enabled, it is possible that the
+busy poll thread grabs this SCHED bit (after the previous napi->poll()
+invokes napi_complete_done() and clears SCHED bit) and tries to poll
+on the same napi. napi_disable() could grab the SCHED bit as well.
+This patch tries to fix this race by adding a new bit
+NAPI_STATE_SCHED_THREADED in napi->state. This bit gets set in
+____napi_schedule() if the threaded mode is enabled, and gets cleared
+in napi_complete_done(), and we only poll the napi in kthread if this
+bit is set. This helps distinguish the ownership of the napi between
+kthread and other scenarios and fixes the race issue.
+
+Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
+Reported-by: Martin Zaharinov <micron10@gmail.com>
+Suggested-by: Jakub Kicinski <kuba@kernel.org>
+Signed-off-by: Wei Wang <weiwan@google.com>
+Cc: Alexander Duyck <alexanderduyck@fb.com>
+Cc: Eric Dumazet <edumazet@google.com>
+Cc: Paolo Abeni <pabeni@redhat.com>
+Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
+---
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -328,6 +328,7 @@ enum {
+ 	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
+ 	NAPI_STATE_HASHED,	/* In NAPI hash */
+ 	NAPI_STATE_THREADED,	/* The poll is performed inside its own thread*/
++	NAPI_STATE_SCHED_THREADED,	/* Napi is currently scheduled in threaded mode */
+ };
+ 
+ enum gro_result {
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -3281,6 +3281,8 @@ static inline void ____napi_schedule(str
+ 		 */
+ 		thread = READ_ONCE(napi->thread);
+ 		if (thread) {
++			if (thread->state != TASK_INTERRUPTIBLE)
++				set_bit(NAPI_STATE_SCHED_THREADED, &napi->state);
+ 			wake_up_process(thread);
+ 			return;
+ 		}
+@@ -4745,12 +4747,14 @@ void __napi_complete(struct napi_struct
+ 	list_del_init(&n->poll_list);
+ 	smp_mb__before_atomic();
+ 	clear_bit(NAPI_STATE_SCHED, &n->state);
++	clear_bit(NAPI_STATE_SCHED_THREADED, &n->state);
+ }
+ EXPORT_SYMBOL(__napi_complete);
+ 
+ void napi_complete_done(struct napi_struct *n, int work_done)
+ {
+ 	unsigned long flags;
++	unsigned long val, new;
+ 
+ 	/*
+ 	 * don't let napi dequeue from the cpu poll list
+@@ -4771,14 +4775,19 @@ void napi_complete_done(struct napi_stru
+ 		else
+ 			napi_gro_flush(n, false);
+ 	}
+-	if (likely(list_empty(&n->poll_list))) {
+-		WARN_ON_ONCE(!test_and_clear_bit(NAPI_STATE_SCHED, &n->state));
+-	} else {
+-		/* If n->poll_list is not empty, we need to mask irqs */
+-		local_irq_save(flags);
+-		__napi_complete(n);
+-		local_irq_restore(flags);
+-	}
++
++	/* If n->poll_list is not empty, we need to mask irqs */
++	local_irq_save(flags);
++	list_del_init(&n->poll_list);
++	local_irq_restore(flags);
++
++	do {
++		val = READ_ONCE(n->state);
++
++		WARN_ON_ONCE(!(val & BIT(NAPI_STATE_SCHED)));
++		new = val & ~(BIT(NAPI_STATE_SCHED) |
++			      BIT(NAPI_STATE_SCHED_THREADED));
++	} while (cmpxchg(&n->state, val, new) != val);
+ }
+ EXPORT_SYMBOL(napi_complete_done);
+ 
+@@ -5053,16 +5062,25 @@ static int napi_poll(struct napi_struct
+ 
+ static int napi_thread_wait(struct napi_struct *napi)
+ {
++	bool woken = false;
++
+ 	set_current_state(TASK_INTERRUPTIBLE);
+ 
+ 	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
+-		if (test_bit(NAPI_STATE_SCHED, &napi->state)) {
++		/* Testing SCHED_THREADED bit here to make sure the current
++		 * kthread owns this napi and could poll on this napi.
++		 * Testing SCHED bit is not enough because SCHED bit might be
++		 * set by some other busy poll thread or by napi_disable().
++		 */
++		if (test_bit(NAPI_STATE_SCHED_THREADED, &napi->state) || woken) {
+ 			WARN_ON(!list_empty(&napi->poll_list));
+ 			__set_current_state(TASK_RUNNING);
+ 			return 0;
+ 		}
+ 
+ 		schedule();
++		/* woken being true indicates this thread owns this napi. */
++		woken = true;
+ 		set_current_state(TASK_INTERRUPTIBLE);
+ 	}
+ 	__set_current_state(TASK_RUNNING);

feeds/ipq807x/ipq807x/patches/214-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch

@@ -0,0 +1,53 @@
+From: Paolo Abeni <pabeni@redhat.com>
+Date: Fri, 9 Apr 2021 17:24:17 +0200
+Subject: [PATCH] net: fix hangup on napi_disable for threaded napi
+
+napi_disable() is subject to an hangup, when the threaded
+mode is enabled and the napi is under heavy traffic.
+
+If the relevant napi has been scheduled and the napi_disable()
+kicks in before the next napi_threaded_wait() completes - so
+that the latter quits due to the napi_disable_pending() condition,
+the existing code leaves the NAPI_STATE_SCHED bit set and the
+napi_disable() loop waiting for such bit will hang.
+
+This patch addresses the issue by dropping the NAPI_STATE_DISABLE
+bit test in napi_thread_wait(). The later napi_threaded_poll()
+iteration will take care of clearing the NAPI_STATE_SCHED.
+
+This also addresses a related problem reported by Jakub:
+before this patch a napi_disable()/napi_enable() pair killed
+the napi thread, effectively disabling the threaded mode.
+On the patched kernel napi_disable() simply stops scheduling
+the relevant thread.
+
+v1 -> v2:
+  - let the main napi_thread_poll() loop clear the SCHED bit
+
+Reported-by: Jakub Kicinski <kuba@kernel.org>
+Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+Reviewed-by: Eric Dumazet <edumazet@google.com>
+Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -5066,7 +5066,7 @@ static int napi_thread_wait(struct napi_
+ 
+ 	set_current_state(TASK_INTERRUPTIBLE);
+ 
+-	while (!kthread_should_stop() && !napi_disable_pending(napi)) {
++	while (!kthread_should_stop()) {
+ 		/* Testing SCHED_THREADED bit here to make sure the current
+ 		 * kthread owns this napi and could poll on this napi.
+ 		 * Testing SCHED bit is not enough because SCHED bit might be
+@@ -5084,6 +5084,7 @@ static int napi_thread_wait(struct napi_
+ 		set_current_state(TASK_INTERRUPTIBLE);
+ 	}
+ 	__set_current_state(TASK_RUNNING);
++
+ 	return -1;
+ }
+ 

feeds/ipq807x/ipq807x/patches/220-net-sched-add-clsact-qdisc.patch

@@ -0,0 +1,439 @@
+From: Daniel Borkmann <daniel@iogearbox.net>
+Date: Thu, 7 Jan 2016 22:29:47 +0100
+Subject: [PATCH] net, sched: add clsact qdisc
+
+This work adds a generalization of the ingress qdisc as a qdisc holding
+only classifiers. The clsact qdisc works on ingress, but also on egress.
+In both cases, it's execution happens without taking the qdisc lock, and
+the main difference for the egress part compared to prior version of [1]
+is that this can be applied with _any_ underlying real egress qdisc (also
+classless ones).
+
+Besides solving the use-case of [1], that is, allowing for more programmability
+on assigning skb->priority for the mqprio case that is supported by most
+popular 10G+ NICs, it also opens up a lot more flexibility for other tc
+applications. The main work on classification can already be done at clsact
+egress time if the use-case allows and state stored for later retrieval
+f.e. again in skb->priority with major/minors (which is checked by most
+classful qdiscs before consulting tc_classify()) and/or in other skb fields
+like skb->tc_index for some light-weight post-processing to get to the
+eventual classid in case of a classful qdisc. Another use case is that
+the clsact egress part allows to have a central egress counterpart to
+the ingress classifiers, so that classifiers can easily share state (e.g.
+in cls_bpf via eBPF maps) for ingress and egress.
+
+Currently, default setups like mq + pfifo_fast would require for this to
+use, for example, prio qdisc instead (to get a tc_classify() run) and to
+duplicate the egress classifier for each queue. With clsact, it allows
+for leaving the setup as is, it can additionally assign skb->priority to
+put the skb in one of pfifo_fast's bands and it can share state with maps.
+Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid)
+w/o the need to perform a skb_dst_force() to hold on to it any longer. In
+lwt case, we can also use this facility to setup dst metadata via cls_bpf
+(bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for
+that (case of IFF_NO_QUEUE devices, for example).
+
+The realization can be done without any changes to the scheduler core
+framework. All it takes is that we have two a-priori defined minors/child
+classes, where we can mux between ingress and egress classifier list
+(dev->ingress_cl_list and dev->egress_cl_list, latter stored close to
+dev->_tx to avoid extra cacheline miss for moderate loads). The egress
+part is a bit similar modelled to handle_ing() and patched to a noop in
+case the functionality is not used. Both handlers are now called
+sch_handle_ingress() and sch_handle_egress(), code sharing among the two
+doesn't seem practical as there are various minor differences in both
+paths, so that making them conditional in a single handler would rather
+slow things down.
+
+Full compatibility to ingress qdisc is provided as well. Since both
+piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist
+per netdevice, and thus ingress qdisc specific behaviour can be retained
+for user space. This means, either a user does 'tc qdisc add dev foo ingress'
+and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact'
+alternative, where both, ingress and egress classifier can be configured
+as in the below example. ingress qdisc supports attaching classifier to any
+minor number whereas clsact has two fixed minors for muxing between the
+lists, therefore to not break user space setups, they are better done as
+two separate qdiscs.
+
+I decided to extend the sch_ingress module with clsact functionality so
+that commonly used code can be reused, the module is being aliased with
+sch_clsact so that it can be auto-loaded properly. Alternative would have been
+to add a flag when initializing ingress to alter its behaviour plus aliasing
+to a different name (as it's more than just ingress). However, the first would
+end up, based on the flag, choosing the new/old behaviour by calling different
+function implementations to handle each anyway, the latter would require to
+register ingress qdisc once again under different alias. So, this really begs
+to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops
+by its own that share callbacks used by both.
+
+Example, adding qdisc:
+
+   # tc qdisc add dev foo clsact
+   # tc qdisc show dev foo
+   qdisc mq 0: root
+   qdisc pfifo_fast 0: parent :1 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc pfifo_fast 0: parent :2 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc pfifo_fast 0: parent :3 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc pfifo_fast 0: parent :4 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
+   qdisc clsact ffff: parent ffff:fff1
+
+Adding filters (deleting, etc works analogous by specifying ingress/egress):
+
+   # tc filter add dev foo ingress bpf da obj bar.o sec ingress
+   # tc filter add dev foo egress  bpf da obj bar.o sec egress
+   # tc filter show dev foo ingress
+   filter protocol all pref 49152 bpf
+   filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action
+   # tc filter show dev foo egress
+   filter protocol all pref 49152 bpf
+   filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action
+
+A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will
+show an empty list for clsact. Either using the parent names (ingress/egress)
+or specifying the full major/minor will then show the related filter lists.
+
+Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend.
+
+  [1] http://patchwork.ozlabs.org/patch/512949/
+
+Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
+Acked-by: John Fastabend <john.r.fastabend@intel.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1770,7 +1770,9 @@ struct net_device {
+ #ifdef CONFIG_XPS
+ 	struct xps_dev_maps __rcu *xps_maps;
+ #endif
+-
++#ifdef CONFIG_NET_CLS_ACT
++	struct tcf_proto __rcu  *egress_cl_list;
++#endif
+ #ifdef CONFIG_NET_SWITCHDEV
+ 	u32			offload_fwd_mark;
+ #endif
+--- a/include/linux/rtnetlink.h
++++ b/include/linux/rtnetlink.h
+@@ -84,6 +84,11 @@ void net_inc_ingress_queue(void);
+ void net_dec_ingress_queue(void);
+ #endif
+ 
++#ifdef CONFIG_NET_EGRESS
++void net_inc_egress_queue(void);
++void net_dec_egress_queue(void);
++#endif
++
+ extern void rtnetlink_init(void);
+ extern void __rtnl_unlock(void);
+ 
+--- a/include/uapi/linux/pkt_sched.h
++++ b/include/uapi/linux/pkt_sched.h
+@@ -72,6 +72,10 @@ struct tc_estimator {
+ #define TC_H_UNSPEC	(0U)
+ #define TC_H_ROOT	(0xFFFFFFFFU)
+ #define TC_H_INGRESS    (0xFFFFFFF1U)
++#define TC_H_CLSACT	TC_H_INGRESS
++
++#define TC_H_MIN_INGRESS	0xFFF2U
++#define TC_H_MIN_EGRESS		0xFFF3U
+ 
+ /* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */
+ enum tc_link_layer {
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -1697,6 +1697,22 @@ void net_dec_ingress_queue(void)
+ EXPORT_SYMBOL_GPL(net_dec_ingress_queue);
+ #endif
+ 
++#ifdef CONFIG_NET_EGRESS
++static struct static_key egress_needed __read_mostly;
++
++void net_inc_egress_queue(void)
++{
++	static_key_slow_inc(&egress_needed);
++}
++EXPORT_SYMBOL_GPL(net_inc_egress_queue);
++
++void net_dec_egress_queue(void)
++{
++	static_key_slow_dec(&egress_needed);
++}
++EXPORT_SYMBOL_GPL(net_dec_egress_queue);
++#endif
++
+ static struct static_key netstamp_needed __read_mostly;
+ #ifdef HAVE_JUMP_LABEL
+ static atomic_t netstamp_needed_deferred;
+@@ -2936,7 +2952,6 @@ static inline int __dev_xmit_skb(struct
+ 	bool contended;
+ 	int rc;
+ 
+-	qdisc_pkt_len_init(skb);
+ 	qdisc_calculate_pkt_len(skb, q);
+ 	/*
+ 	 * Heuristic to force contended enqueues to serialize on a
+@@ -3028,6 +3043,49 @@ int dev_loopback_xmit(struct net *net, s
+ }
+ EXPORT_SYMBOL(dev_loopback_xmit);
+ 
++#ifdef CONFIG_NET_EGRESS
++static struct sk_buff *
++sch_handle_egress(struct sk_buff *skb, int *ret, struct net_device *dev)
++{
++	struct tcf_proto *cl = rcu_dereference_bh(dev->egress_cl_list);
++	struct tcf_result cl_res;
++
++	if (!cl)
++		return skb;
++
++	/* skb->tc_verd and qdisc_skb_cb(skb)->pkt_len were already set
++	 * earlier by the caller.
++	 */
++	qdisc_bstats_cpu_update(cl->q, skb);
++
++	switch (tc_classify(skb, cl, &cl_res, false)) {
++	case TC_ACT_OK:
++	case TC_ACT_RECLASSIFY:
++		skb->tc_index = TC_H_MIN(cl_res.classid);
++		break;
++	case TC_ACT_SHOT:
++		qdisc_qstats_cpu_drop(cl->q);
++		*ret = NET_XMIT_DROP;
++		goto drop;
++	case TC_ACT_STOLEN:
++	case TC_ACT_QUEUED:
++		*ret = NET_XMIT_SUCCESS;
++drop:
++		kfree_skb(skb);
++		return NULL;
++	case TC_ACT_REDIRECT:
++		/* No need to push/pop skb's mac_header here on egress! */
++		skb_do_redirect(skb);
++		*ret = NET_XMIT_SUCCESS;
++		return NULL;
++	default:
++		break;
++	}
++
++	return skb;
++}
++#endif /* CONFIG_NET_EGRESS */
++
+ static inline int get_xps_queue(struct net_device *dev, struct sk_buff *skb)
+ {
+ #ifdef CONFIG_XPS
+@@ -3152,6 +3210,17 @@ static int __dev_queue_xmit(struct sk_bu
+ 
+ 	skb_update_prio(skb);
+ 
++	qdisc_pkt_len_init(skb);
++#ifdef CONFIG_NET_CLS_ACT
++	skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_EGRESS);
++# ifdef CONFIG_NET_EGRESS
++	if (static_key_false(&egress_needed)) {
++		skb = sch_handle_egress(skb, &rc, dev);
++		if (!skb)
++			goto out;
++	}
++# endif
++#endif
+ 	/* If device/qdisc don't need skb->dst, release it right now while
+ 	 * its hot in this cpu cache.
+ 	 */
+@@ -3173,9 +3242,6 @@ static int __dev_queue_xmit(struct sk_bu
+ 	txq = netdev_pick_tx(dev, skb, accel_priv);
+ 	q = rcu_dereference_bh(txq->qdisc);
+ 
+-#ifdef CONFIG_NET_CLS_ACT
+-	skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_EGRESS);
+-#endif
+ 	trace_net_dev_queue(skb);
+ 	if (q->enqueue) {
+ 		rc = __dev_xmit_skb(skb, q, dev, txq);
+@@ -3750,9 +3816,9 @@ int (*br_fdb_test_addr_hook)(struct net_
+ EXPORT_SYMBOL_GPL(br_fdb_test_addr_hook);
+ #endif
+ 
+-static inline struct sk_buff *handle_ing(struct sk_buff *skb,
+-					 struct packet_type **pt_prev,
+-					 int *ret, struct net_device *orig_dev)
++static inline struct sk_buff *
++sch_handle_ingress(struct sk_buff *skb, struct packet_type **pt_prev, int *ret,
++		   struct net_device *orig_dev)
+ {
+ #ifdef CONFIG_NET_CLS_ACT
+ 	struct tcf_proto *cl = rcu_dereference_bh(skb->dev->ingress_cl_list);
+@@ -3974,7 +4040,7 @@ another_round:
+ skip_taps:
+ #ifdef CONFIG_NET_INGRESS
+ 	if (static_key_false(&ingress_needed)) {
+-		skb = handle_ing(skb, &pt_prev, &ret, orig_dev);
++		skb = sch_handle_ingress(skb, &pt_prev, &ret, orig_dev);
+ 		if (!skb)
+ 			goto out;
+ 
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -54,6 +54,9 @@ config COMPAT_NETLINK_MESSAGES
+ config NET_INGRESS
+ 	bool
+ 
++config NET_EGRESS
++	bool
++
+ menu "Networking options"
+ 
+ source "net/packet/Kconfig"
+--- a/net/sched/cls_bpf.c
++++ b/net/sched/cls_bpf.c
+@@ -291,7 +291,7 @@ static int cls_bpf_prog_from_efd(struct
+ 	prog->bpf_name = name;
+ 	prog->filter = fp;
+ 
+-	if (fp->dst_needed)
++	if (fp->dst_needed && !(tp->q->flags & TCQ_F_INGRESS))
+ 		netif_keep_dst(qdisc_dev(tp->q));
+ 
+ 	return 0;
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -342,15 +342,21 @@ config NET_SCH_PIE
+ 	  If unsure, say N.
+ 
+ config NET_SCH_INGRESS
+-	tristate "Ingress Qdisc"
++	tristate "Ingress/classifier-action Qdisc"
+ 	depends on NET_CLS_ACT
+ 	select NET_INGRESS
++	select NET_EGRESS
+ 	---help---
+-	  Say Y here if you want to use classifiers for incoming packets.
++	  Say Y here if you want to use classifiers for incoming and/or outgoing
++	  packets. This qdisc doesn't do anything else besides running classifiers,
++	  which can also have actions attached to them. In case of outgoing packets,
++	  classifiers that this qdisc holds are executed in the transmit path
++	  before real enqueuing to an egress qdisc happens.
++
+ 	  If unsure, say Y.
+ 
+-	  To compile this code as a module, choose M here: the
+-	  module will be called sch_ingress.
++	  To compile this code as a module, choose M here: the module will be
++	  called sch_ingress with alias of sch_clsact.
+ 
+ config NET_SCH_PLUG
+ 	tristate "Plug network traffic until release (PLUG)"
+--- a/net/sched/sch_ingress.c
++++ b/net/sched/sch_ingress.c
+@@ -1,4 +1,5 @@
+-/* net/sched/sch_ingress.c - Ingress qdisc
++/* net/sched/sch_ingress.c - Ingress and clsact qdisc
++ *
+  *              This program is free software; you can redistribute it and/or
+  *              modify it under the terms of the GNU General Public License
+  *              as published by the Free Software Foundation; either version
+@@ -98,17 +99,100 @@ static struct Qdisc_ops ingress_qdisc_op
+ 	.owner		=	THIS_MODULE,
+ };
+ 
++static unsigned long clsact_get(struct Qdisc *sch, u32 classid)
++{
++	switch (TC_H_MIN(classid)) {
++	case TC_H_MIN(TC_H_MIN_INGRESS):
++	case TC_H_MIN(TC_H_MIN_EGRESS):
++		return TC_H_MIN(classid);
++	default:
++		return 0;
++	}
++}
++
++static unsigned long clsact_bind_filter(struct Qdisc *sch,
++					unsigned long parent, u32 classid)
++{
++	return clsact_get(sch, classid);
++}
++
++static struct tcf_proto __rcu **clsact_find_tcf(struct Qdisc *sch,
++						unsigned long cl)
++{
++	struct net_device *dev = qdisc_dev(sch);
++
++	switch (cl) {
++	case TC_H_MIN(TC_H_MIN_INGRESS):
++		return &dev->ingress_cl_list;
++	case TC_H_MIN(TC_H_MIN_EGRESS):
++		return &dev->egress_cl_list;
++	default:
++		return NULL;
++	}
++}
++
++static int clsact_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	net_inc_ingress_queue();
++	net_inc_egress_queue();
++
++	sch->flags |= TCQ_F_CPUSTATS;
++
++	return 0;
++}
++
++static void clsact_destroy(struct Qdisc *sch)
++{
++	struct net_device *dev = qdisc_dev(sch);
++
++	tcf_destroy_chain(&dev->ingress_cl_list);
++	tcf_destroy_chain(&dev->egress_cl_list);
++
++	net_dec_ingress_queue();
++	net_dec_egress_queue();
++}
++
++static const struct Qdisc_class_ops clsact_class_ops = {
++	.leaf		=	ingress_leaf,
++	.get		=	clsact_get,
++	.put		=	ingress_put,
++	.walk		=	ingress_walk,
++	.tcf_chain	=	clsact_find_tcf,
++	.bind_tcf	=	clsact_bind_filter,
++	.unbind_tcf	=	ingress_put,
++};
++
++static struct Qdisc_ops clsact_qdisc_ops __read_mostly = {
++	.cl_ops		=	&clsact_class_ops,
++	.id		=	"clsact",
++	.init		=	clsact_init,
++	.destroy	=	clsact_destroy,
++	.dump		=	ingress_dump,
++	.owner		=	THIS_MODULE,
++};
++
+ static int __init ingress_module_init(void)
+ {
+-	return register_qdisc(&ingress_qdisc_ops);
++	int ret;
++
++	ret = register_qdisc(&ingress_qdisc_ops);
++	if (!ret) {
++		ret = register_qdisc(&clsact_qdisc_ops);
++		if (ret)
++			unregister_qdisc(&ingress_qdisc_ops);
++	}
++
++	return ret;
+ }
+ 
+ static void __exit ingress_module_exit(void)
+ {
+ 	unregister_qdisc(&ingress_qdisc_ops);
++	unregister_qdisc(&clsact_qdisc_ops);
+ }
+ 
+ module_init(ingress_module_init);
+ module_exit(ingress_module_exit);
+ 
++MODULE_ALIAS("sch_clsact");
+ MODULE_LICENSE("GPL");

feeds/ipq807x/ipq807x/patches/221-net-sched-act_mirred-Rename-tcfm_ok_push-to-tcfm_mac.patch

@@ -0,0 +1,75 @@
+From: Shmulik Ladkani <shmulik.ladkani@gmail.com>
+Date: Thu, 13 Oct 2016 09:06:41 +0300
+Subject: [PATCH] net/sched: act_mirred: Rename tcfm_ok_push to
+ tcfm_mac_header_xmit and make it a bool
+
+'tcfm_ok_push' specifies whether a mac_len sized push is needed upon
+egress to the target device (if action is performed at ingress).
+
+Rename it to 'tcfm_mac_header_xmit' as this is actually an attribute of
+the target device (and use a bool instead of int).
+
+This allows to decouple the attribute from the action to be taken.
+
+Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
+Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/net/tc_act/tc_mirred.h
++++ b/include/net/tc_act/tc_mirred.h
+@@ -7,7 +7,7 @@ struct tcf_mirred {
+ 	struct tcf_common	common;
+ 	int			tcfm_eaction;
+ 	int			tcfm_ifindex;
+-	int			tcfm_ok_push;
++	bool			tcfm_mac_header_xmit;
+ 	struct net_device __rcu	*tcfm_dev;
+ 	struct list_head	tcfm_list;
+ };
+--- a/net/sched/act_mirred.c
++++ b/net/sched/act_mirred.c
+@@ -55,10 +55,11 @@ static int tcf_mirred_init(struct net *n
+ 			   int bind)
+ {
+ 	struct nlattr *tb[TCA_MIRRED_MAX + 1];
++	bool mac_header_xmit = false;
+ 	struct tc_mirred *parm;
+ 	struct tcf_mirred *m;
+ 	struct net_device *dev;
+-	int ret, ok_push = 0;
++	int ret;
+ 
+ 	if (nla == NULL)
+ 		return -EINVAL;
+@@ -86,10 +87,10 @@ static int tcf_mirred_init(struct net *n
+ 		case ARPHRD_IPGRE:
+ 		case ARPHRD_VOID:
+ 		case ARPHRD_NONE:
+-			ok_push = 0;
++			mac_header_xmit = false;
+ 			break;
+ 		default:
+-			ok_push = 1;
++			mac_header_xmit = true;
+ 			break;
+ 		}
+ 	} else {
+@@ -123,7 +124,7 @@ static int tcf_mirred_init(struct net *n
+ 			dev_put(rcu_dereference_protected(m->tcfm_dev, 1));
+ 		dev_hold(dev);
+ 		rcu_assign_pointer(m->tcfm_dev, dev);
+-		m->tcfm_ok_push = ok_push;
++		m->tcfm_mac_header_xmit = mac_header_xmit;
+ 	}
+ 
+ 	if (ret == ACT_P_CREATED) {
+@@ -169,7 +170,7 @@ static int tcf_mirred(struct sk_buff *sk
+ 		goto out;
+ 
+ 	if (!(at & AT_EGRESS)) {
+-		if (m->tcfm_ok_push)
++		if (m->tcfm_mac_header_xmit)
+ 			skb_push_rcsum(skb2, skb->mac_len);
+ 	}
+ 

feeds/ipq807x/ipq807x/patches/222-net-sched-act_mirred-Refactor-detection-whether-dev-.patch

@@ -0,0 +1,36 @@
+From: Shmulik Ladkani <shmulik.ladkani@gmail.com>
+Date: Thu, 13 Oct 2016 09:06:42 +0300
+Subject: [PATCH] net/sched: act_mirred: Refactor detection whether dev needs
+ xmit at mac header
+
+Move detection logic that tests whether device expects skb data to point
+at mac_header upon xmit into a function.
+
+Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
+Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/net/sched/act_mirred.c
++++ b/net/sched/act_mirred.c
+@@ -80,19 +80,7 @@ static int tcf_mirred_init(struct net *n
+ 		dev = __dev_get_by_index(net, parm->ifindex);
+ 		if (dev == NULL)
+ 			return -ENODEV;
+-		switch (dev->type) {
+-		case ARPHRD_TUNNEL:
+-		case ARPHRD_TUNNEL6:
+-		case ARPHRD_SIT:
+-		case ARPHRD_IPGRE:
+-		case ARPHRD_VOID:
+-		case ARPHRD_NONE:
+-			mac_header_xmit = false;
+-			break;
+-		default:
+-			mac_header_xmit = true;
+-			break;
+-		}
++		mac_header_xmit = dev_is_mac_header_xmit(dev);
+ 	} else {
+ 		dev = NULL;
+ 	}

feeds/ipq807x/ipq807x/patches/223-net-sched-act_mirred-Implement-ingress-actions.patch

@@ -0,0 +1,125 @@
+From: Shmulik Ladkani <shmulik.ladkani@gmail.com>
+Date: Thu, 13 Oct 2016 09:06:44 +0300
+Subject: [PATCH] net/sched: act_mirred: Implement ingress actions
+
+Up until now, 'action mirred' supported only egress actions (either
+TCA_EGRESS_REDIR or TCA_EGRESS_MIRROR).
+
+This patch implements the corresponding ingress actions
+TCA_INGRESS_REDIR and TCA_INGRESS_MIRROR.
+
+This allows attaching filters whose target is to hand matching skbs into
+the rx processing of a specified device.
+
+Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
+Cc: Jamal Hadi Salim <jhs@mojatatu.com>
+Cc: Eric Dumazet <eric.dumazet@gmail.com>
+Cc: Cong Wang <xiyou.wangcong@gmail.com>
+Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
+Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/net/sched/act_mirred.c
++++ b/net/sched/act_mirred.c
+@@ -33,6 +33,25 @@
+ static LIST_HEAD(mirred_list);
+ static DEFINE_SPINLOCK(mirred_list_lock);
+ 
++static bool tcf_mirred_is_act_redirect(int action)
++{
++	return action == TCA_EGRESS_REDIR || action == TCA_INGRESS_REDIR;
++}
++
++static u32 tcf_mirred_act_direction(int action)
++{
++	switch (action) {
++	case TCA_EGRESS_REDIR:
++	case TCA_EGRESS_MIRROR:
++		return AT_EGRESS;
++	case TCA_INGRESS_REDIR:
++	case TCA_INGRESS_MIRROR:
++		return AT_INGRESS;
++	default:
++		BUG();
++	}
++}
++
+ static void tcf_mirred_release(struct tc_action *a, int bind)
+ {
+ 	struct tcf_mirred *m = to_mirred(a);
+@@ -72,6 +91,8 @@ static int tcf_mirred_init(struct net *n
+ 	switch (parm->eaction) {
+ 	case TCA_EGRESS_MIRROR:
+ 	case TCA_EGRESS_REDIR:
++	case TCA_INGRESS_REDIR:
++	case TCA_INGRESS_MIRROR:
+ 		break;
+ 	default:
+ 		return -EINVAL;
+@@ -129,9 +150,12 @@ static int tcf_mirred(struct sk_buff *sk
+ 		      struct tcf_result *res)
+ {
+ 	struct tcf_mirred *m = a->priv;
++	bool m_mac_header_xmit;
+ 	struct net_device *dev;
+ 	struct sk_buff *skb2;
+-	int retval, err;
++	int retval, err = 0;
++	int m_eaction;
++	int mac_len;
+ 	u32 at;
+ 
+ 	tcf_lastuse_update(&m->tcf_tm);
+@@ -139,6 +163,8 @@ static int tcf_mirred(struct sk_buff *sk
+ 	bstats_cpu_update(this_cpu_ptr(m->common.cpu_bstats), skb);
+ 
+ 	rcu_read_lock();
++	m_mac_header_xmit = READ_ONCE(m->tcfm_mac_header_xmit);
++	m_eaction = READ_ONCE(m->tcfm_eaction);
+ 	retval = READ_ONCE(m->tcf_action);
+ 	dev = rcu_dereference(m->tcfm_dev);
+ 	if (unlikely(!dev)) {
+@@ -157,24 +183,37 @@ static int tcf_mirred(struct sk_buff *sk
+ 	if (!skb2)
+ 		goto out;
+ 
+-	if (!(at & AT_EGRESS)) {
+-		if (m->tcfm_mac_header_xmit)
++	/* If action's target direction differs than filter's direction,
++	 * and devices expect a mac header on xmit, then mac push/pull is
++	 * needed.
++	 */
++	if (at != tcf_mirred_act_direction(m_eaction) && m_mac_header_xmit) {
++		if (at & AT_EGRESS) {
++			/* caught at egress, act ingress: pull mac */
++			mac_len = skb_network_header(skb) - skb_mac_header(skb);
++			skb_pull_rcsum(skb2, mac_len);
++		} else {
++			/* caught at ingress, act egress: push mac */
+ 			skb_push_rcsum(skb2, skb->mac_len);
++		}
+ 	}
+ 
+ 	/* mirror is always swallowed */
+-	if (m->tcfm_eaction != TCA_EGRESS_MIRROR)
++	if (tcf_mirred_is_act_redirect(m_eaction))
+ 		skb2->tc_verd = SET_TC_FROM(skb2->tc_verd, at);
+ 
+ 	skb2->skb_iif = skb->dev->ifindex;
+ 	skb2->dev = dev;
+ 	skb_sender_cpu_clear(skb2);
+-	err = dev_queue_xmit(skb2);
++	if (tcf_mirred_act_direction(m_eaction) & AT_EGRESS)
++		err = dev_queue_xmit(skb2);
++	else
++		err = netif_receive_skb(skb2);
+ 
+ 	if (err) {
+ out:
+ 		qstats_overlimit_inc(this_cpu_ptr(m->common.cpu_qstats));
+-		if (m->tcfm_eaction != TCA_EGRESS_MIRROR)
++		if (tcf_mirred_is_act_redirect(m_eaction))
+ 			retval = TC_ACT_SHOT;
+ 	}
+ 	rcu_read_unlock();

feeds/ipq807x/ipq807x/patches/224-clear-skbuffs-cb-for-incoming-packets.patch

@@ -0,0 +1,30 @@
+From a0d398a7373b395a2cbdc865815560671d1e8a08 Mon Sep 17 00:00:00 2001
+From: Venkat Chimata <venkata@shasta.cloud>
+Date: Fri, 12 Aug 2022 15:42:40 +0530
+Subject: [PATCH] sk_buff's cb should be cleared in the entry point for both
+ incoming and outgoing packets at each layer. At bridge, it is already handled
+ in the outgoing path, but not in the incoming path. We have seen cases where
+ proxyarp_replied was 1 on sk_buffs coming from the WLAN driver and they were
+ getting dropped in forwarding path.
+
+Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
+---
+ net/bridge/br_input.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
+index e6b745b7..09cd5b72 100644
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -282,6 +282,8 @@ rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
+ 	if (!skb)
+ 		return RX_HANDLER_CONSUMED;
+ 
++	memset(skb->cb, 0, sizeof(struct br_input_skb_cb));
++
+ 	p = br_port_get_rcu(skb->dev);
+ 
+ 	if (unlikely(is_link_local_ether_addr(dest))) {
+-- 
+2.34.1
+

feeds/ipq807x/ipq807x/patches/225-net-sched-introduce-Match-all-classifier.patch

@@ -0,0 +1,315 @@
+From: Jiri Pirko <jiri@mellanox.com>
+Date: Thu, 21 Jul 2016 12:03:11 +0200
+Subject: [PATCH] net/sched: introduce Match-all classifier
+
+The matchall classifier matches every packet and allows the user to apply
+actions on it. This filter is very useful in usecases where every packet
+should be matched, for example, packet mirroring (SPAN) can be setup very
+easily using that filter.
+
+Signed-off-by: Jiri Pirko <jiri@mellanox.com>
+Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ create mode 100644 net/sched/cls_matchall.c
+
+--- a/include/uapi/linux/pkt_cls.h
++++ b/include/uapi/linux/pkt_cls.h
+@@ -427,6 +427,17 @@ enum {
+ 
+ #define TCA_FLOWER_MAX (__TCA_FLOWER_MAX - 1)
+ 
++/* Match-all classifier */
++
++enum {
++	TCA_MATCHALL_UNSPEC,
++	TCA_MATCHALL_CLASSID,
++	TCA_MATCHALL_ACT,
++	__TCA_MATCHALL_MAX,
++};
++
++#define TCA_MATCHALL_MAX (__TCA_MATCHALL_MAX - 1)
++
+ /* Extended Matches */
+ 
+ struct tcf_ematch_tree_hdr {
+--- /dev/null
++++ b/net/sched/cls_matchall.c
+@@ -0,0 +1,248 @@
++/*
++ * net/sched/cls_matchll.c		Match-all classifier
++ *
++ * Copyright (c) 2016 Jiri Pirko <jiri@mellanox.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++
++#include <net/sch_generic.h>
++#include <net/pkt_cls.h>
++
++struct cls_mall_filter {
++	struct tcf_exts exts;
++	struct tcf_result res;
++	u32 handle;
++	struct rcu_head	rcu;
++};
++
++struct cls_mall_head {
++	struct cls_mall_filter *filter;
++	struct rcu_head	rcu;
++};
++
++static int mall_classify(struct sk_buff *skb, const struct tcf_proto *tp,
++			 struct tcf_result *res)
++{
++	struct cls_mall_head *head = rcu_dereference_bh(tp->root);
++	struct cls_mall_filter *f = head->filter;
++
++	return tcf_exts_exec(skb, &f->exts, res);
++}
++
++static int mall_init(struct tcf_proto *tp)
++{
++	struct cls_mall_head *head;
++
++	head = kzalloc(sizeof(*head), GFP_KERNEL);
++	if (!head)
++		return -ENOBUFS;
++
++	rcu_assign_pointer(tp->root, head);
++
++	return 0;
++}
++
++static void mall_destroy_filter(struct rcu_head *head)
++{
++	struct cls_mall_filter *f = container_of(head, struct cls_mall_filter, rcu);
++
++	tcf_exts_destroy(&f->exts);
++	kfree(f);
++}
++
++static bool mall_destroy(struct tcf_proto *tp, bool force)
++{
++	struct cls_mall_head *head = rtnl_dereference(tp->root);
++
++	if (!force && head->filter)
++		return false;
++
++	if (head->filter)
++		call_rcu(&head->filter->rcu, mall_destroy_filter);
++	RCU_INIT_POINTER(tp->root, NULL);
++	kfree_rcu(head, rcu);
++	return true;
++}
++
++static unsigned long mall_get(struct tcf_proto *tp, u32 handle)
++{
++	struct cls_mall_head *head = rtnl_dereference(tp->root);
++	struct cls_mall_filter *f = head->filter;
++
++	if (f && f->handle == handle)
++		return (unsigned long) f;
++	return 0;
++}
++
++static const struct nla_policy mall_policy[TCA_MATCHALL_MAX + 1] = {
++	[TCA_MATCHALL_UNSPEC]		= { .type = NLA_UNSPEC },
++	[TCA_MATCHALL_CLASSID]		= { .type = NLA_U32 },
++};
++
++static int mall_set_parms(struct net *net, struct tcf_proto *tp,
++			  struct cls_mall_filter *f,
++			  unsigned long base, struct nlattr **tb,
++			  struct nlattr *est, bool ovr)
++{
++	struct tcf_exts e;
++	int err;
++
++	tcf_exts_init(&e, TCA_MATCHALL_ACT, 0);
++	err = tcf_exts_validate(net, tp, tb, est, &e, ovr);
++	if (err < 0)
++		return err;
++
++	if (tb[TCA_MATCHALL_CLASSID]) {
++		f->res.classid = nla_get_u32(tb[TCA_MATCHALL_CLASSID]);
++		tcf_bind_filter(tp, &f->res, base);
++	}
++
++	tcf_exts_change(tp, &f->exts, &e);
++
++	return 0;
++}
++
++static int mall_change(struct net *net, struct sk_buff *in_skb,
++		       struct tcf_proto *tp, unsigned long base,
++		       u32 handle, struct nlattr **tca,
++		       unsigned long *arg, bool ovr)
++{
++	struct cls_mall_head *head = rtnl_dereference(tp->root);
++	struct cls_mall_filter *fold = (struct cls_mall_filter *) *arg;
++	struct cls_mall_filter *f;
++	struct nlattr *tb[TCA_MATCHALL_MAX + 1];
++	int err;
++
++	if (!tca[TCA_OPTIONS])
++		return -EINVAL;
++
++	if (head->filter)
++		return -EBUSY;
++
++	if (fold)
++		return -EINVAL;
++
++	err = nla_parse_nested(tb, TCA_MATCHALL_MAX,
++			       tca[TCA_OPTIONS], mall_policy);
++	if (err < 0)
++		return err;
++
++	f = kzalloc(sizeof(*f), GFP_KERNEL);
++	if (!f)
++		return -ENOBUFS;
++
++	tcf_exts_init(&f->exts, TCA_MATCHALL_ACT, 0);
++
++	if (!handle)
++		handle = 1;
++	f->handle = handle;
++
++	err = mall_set_parms(net, tp, f, base, tb, tca[TCA_RATE], ovr);
++	if (err)
++		goto errout;
++
++	*arg = (unsigned long) f;
++	rcu_assign_pointer(head->filter, f);
++
++	return 0;
++
++errout:
++	kfree(f);
++	return err;
++}
++
++static int mall_delete(struct tcf_proto *tp, unsigned long arg)
++{
++	struct cls_mall_head *head = rtnl_dereference(tp->root);
++	struct cls_mall_filter *f = (struct cls_mall_filter *) arg;
++
++	RCU_INIT_POINTER(head->filter, NULL);
++	tcf_unbind_filter(tp, &f->res);
++	call_rcu(&f->rcu, mall_destroy_filter);
++	return 0;
++}
++
++static void mall_walk(struct tcf_proto *tp, struct tcf_walker *arg)
++{
++	struct cls_mall_head *head = rtnl_dereference(tp->root);
++	struct cls_mall_filter *f = head->filter;
++
++	if (arg->count < arg->skip)
++		goto skip;
++	if (arg->fn(tp, (unsigned long) f, arg) < 0)
++		arg->stop = 1;
++skip:
++	arg->count++;
++}
++
++static int mall_dump(struct net *net, struct tcf_proto *tp, unsigned long fh,
++		     struct sk_buff *skb, struct tcmsg *t)
++{
++	struct cls_mall_filter *f = (struct cls_mall_filter *) fh;
++	struct nlattr *nest;
++
++	if (!f)
++		return skb->len;
++
++	t->tcm_handle = f->handle;
++
++	nest = nla_nest_start(skb, TCA_OPTIONS);
++	if (!nest)
++		goto nla_put_failure;
++
++	if (f->res.classid &&
++	    nla_put_u32(skb, TCA_MATCHALL_CLASSID, f->res.classid))
++		goto nla_put_failure;
++
++	if (tcf_exts_dump(skb, &f->exts))
++		goto nla_put_failure;
++
++	nla_nest_end(skb, nest);
++
++	if (tcf_exts_dump_stats(skb, &f->exts) < 0)
++		goto nla_put_failure;
++
++	return skb->len;
++
++nla_put_failure:
++	nla_nest_cancel(skb, nest);
++	return -1;
++}
++
++static struct tcf_proto_ops cls_mall_ops __read_mostly = {
++	.kind		= "matchall",
++	.classify	= mall_classify,
++	.init		= mall_init,
++	.destroy	= mall_destroy,
++	.get		= mall_get,
++	.change		= mall_change,
++	.delete		= mall_delete,
++	.walk		= mall_walk,
++	.dump		= mall_dump,
++	.owner		= THIS_MODULE,
++};
++
++static int __init cls_mall_init(void)
++{
++	return register_tcf_proto_ops(&cls_mall_ops);
++}
++
++static void __exit cls_mall_exit(void)
++{
++	unregister_tcf_proto_ops(&cls_mall_ops);
++}
++
++module_init(cls_mall_init);
++module_exit(cls_mall_exit);
++
++MODULE_AUTHOR("Jiri Pirko <jiri@mellanox.com>");
++MODULE_DESCRIPTION("Match-all classifier");
++MODULE_LICENSE("GPL v2");
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -526,6 +526,16 @@ config NET_CLS_FLOWER
+ 	  To compile this code as a module, choose M here: the module will
+ 	  be called cls_flower.
+ 
++config NET_CLS_MATCHALL
++	tristate "Match-all classifier"
++	select NET_CLS
++	---help---
++	  If you say Y here, you will be able to classify packets based on
++	  nothing. Every packet will match.
++
++	  To compile this code as a module, choose M here: the module will
++	  be called cls_matchall.
++
+ config NET_EMATCH
+ 	bool "Extended Matches"
+ 	select NET_CLS
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -58,6 +58,7 @@ obj-$(CONFIG_NET_CLS_FLOW)	+= cls_flow.o
+ obj-$(CONFIG_NET_CLS_CGROUP)	+= cls_cgroup.o
+ obj-$(CONFIG_NET_CLS_BPF)	+= cls_bpf.o
+ obj-$(CONFIG_NET_CLS_FLOWER)	+= cls_flower.o
++obj-$(CONFIG_NET_CLS_MATCHALL)	+= cls_matchall.o
+ obj-$(CONFIG_NET_EMATCH)	+= ematch.o
+ obj-$(CONFIG_NET_EMATCH_CMP)	+= em_cmp.o
+ obj-$(CONFIG_NET_EMATCH_NBYTE)	+= em_nbyte.o

feeds/ipq807x/ipq807x/patches/230-ipv4-route-Ignore-output-interface-in-FIB-lookup-for.patch

@@ -0,0 +1,72 @@
+From: Stefano Brivio <sbrivio@redhat.com>
+Date: Tue, 4 Aug 2020 07:53:42 +0200
+Subject: [PATCH] ipv4: route: Ignore output interface in FIB lookup for PMTU
+ route
+
+Currently, processes sending traffic to a local bridge with an
+encapsulation device as a port don't get ICMP errors if they exceed
+the PMTU of the encapsulated link.
+
+David Ahern suggested this as a hack, but it actually looks like
+the correct solution: when we update the PMTU for a given destination
+by means of updating or creating a route exception, the encapsulation
+might trigger this because of PMTU discovery happening either on the
+encapsulation device itself, or its lower layer. This happens on
+bridged encapsulations only.
+
+The output interface shouldn't matter, because we already have a
+valid destination. Drop the output interface restriction from the
+associated route lookup.
+
+For UDP tunnels, we will now have a route exception created for the
+encapsulation itself, with a MTU value reflecting its headroom, which
+allows a bridge forwarding IP packets originated locally to deliver
+errors back to the sending socket.
+
+The behaviour is now consistent with IPv6 and verified with selftests
+pmtu_ipv{4,6}_br_{geneve,vxlan}{4,6}_exception introduced later in
+this series.
+
+v2:
+- reset output interface only for bridge ports (David Ahern)
+- add and use netif_is_any_bridge_port() helper (David Ahern)
+
+Suggested-by: David Ahern <dsahern@gmail.com>
+Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
+Reviewed-by: David Ahern <dsahern@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -4015,6 +4015,16 @@ static inline bool netif_is_ovs_master(c
+ 	return dev->priv_flags & IFF_OPENVSWITCH;
+ }
+ 
++static inline bool netif_is_ovs_port(const struct net_device *dev)
++{
++	return dev->priv_flags & IFF_OVS_DATAPATH;
++}
++
++static inline bool netif_is_any_bridge_port(const struct net_device *dev)
++{
++	return netif_is_bridge_port(dev) || netif_is_ovs_port(dev);
++}
++
+ static inline bool netif_is_ifb_dev(const struct net_device *dev)
+ {
+ 	return dev->priv_flags_ext & IFF_EXT_IFB;
+--- a/net/ipv4/route.c
++++ b/net/ipv4/route.c
+@@ -1004,6 +1004,11 @@ static void ip_rt_update_pmtu(struct dst
+ 	struct flowi4 fl4;
+ 
+ 	ip_rt_build_flow_key(&fl4, sk, skb);
++
++	/* Don't make lookup fail for bridged encapsulations */
++	if (skb && netif_is_any_bridge_port(skb->dev))
++		fl4.flowi4_oif = 0;
++
+ 	__ip_rt_update_pmtu(rt, &fl4, mtu);
+ }
+ 

feeds/ipq807x/ipq807x/patches/231-icmp-add-helpers-to-recognize-ICMP-error-packets.patch

@@ -0,0 +1,57 @@
+From: Matteo Croce <mcroce@redhat.com>
+Date: Sat, 2 Nov 2019 01:12:03 +0100
+Subject: [PATCH] icmp: add helpers to recognize ICMP error packets
+
+Add two helper functions, one for IPv4 and one for IPv6, to recognize
+the ICMP packets which are error responses.
+This packets are special because they have as payload the original
+header of the packet which generated it (RFC 792 says at least 8 bytes,
+but Linux actually includes much more than that).
+
+Signed-off-by: Matteo Croce <mcroce@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/linux/icmp.h
++++ b/include/linux/icmp.h
+@@ -24,4 +24,19 @@ static inline struct icmphdr *icmp_hdr(c
+ {
+ 	return (struct icmphdr *)skb_transport_header(skb);
+ }
++
++static inline bool icmp_is_err(int type)
++{
++	switch (type) {
++	case ICMP_DEST_UNREACH:
++	case ICMP_SOURCE_QUENCH:
++	case ICMP_REDIRECT:
++	case ICMP_TIME_EXCEEDED:
++	case ICMP_PARAMETERPROB:
++		return true;
++	}
++
++	return false;
++}
++
+ #endif	/* _LINUX_ICMP_H */
+--- a/include/linux/icmpv6.h
++++ b/include/linux/icmpv6.h
+@@ -42,4 +42,18 @@ extern void				icmpv6_flow_init(struct s
+ 							 const struct in6_addr *saddr,
+ 							 const struct in6_addr *daddr,
+ 							 int oif);
++
++static inline bool icmpv6_is_err(int type)
++{
++	switch (type) {
++	case ICMPV6_DEST_UNREACH:
++	case ICMPV6_PKT_TOOBIG:
++	case ICMPV6_TIME_EXCEED:
++	case ICMPV6_PARAMPROB:
++		return true;
++	}
++
++	return false;
++}
++
+ #endif

feeds/ipq807x/ipq807x/patches/232-tunnels-PMTU-discovery-support-for-directly-bridged-.patch

@@ -0,0 +1,360 @@
+From: Stefano Brivio <sbrivio@redhat.com>
+Date: Tue, 4 Aug 2020 07:53:43 +0200
+Subject: [PATCH] tunnels: PMTU discovery support for directly bridged IP
+ packets
+
+It's currently possible to bridge Ethernet tunnels carrying IP
+packets directly to external interfaces without assigning them
+addresses and routes on the bridged network itself: this is the case
+for UDP tunnels bridged with a standard bridge or by Open vSwitch.
+
+PMTU discovery is currently broken with those configurations, because
+the encapsulation effectively decreases the MTU of the link, and
+while we are able to account for this using PMTU discovery on the
+lower layer, we don't have a way to relay ICMP or ICMPv6 messages
+needed by the sender, because we don't have valid routes to it.
+
+On the other hand, as a tunnel endpoint, we can't fragment packets
+as a general approach: this is for instance clearly forbidden for
+VXLAN by RFC 7348, section 4.3:
+
+   VTEPs MUST NOT fragment VXLAN packets.  Intermediate routers may
+   fragment encapsulated VXLAN packets due to the larger frame size.
+   The destination VTEP MAY silently discard such VXLAN fragments.
+
+The same paragraph recommends that the MTU over the physical network
+accomodates for encapsulations, but this isn't a practical option for
+complex topologies, especially for typical Open vSwitch use cases.
+
+Further, it states that:
+
+   Other techniques like Path MTU discovery (see [RFC1191] and
+   [RFC1981]) MAY be used to address this requirement as well.
+
+Now, PMTU discovery already works for routed interfaces, we get
+route exceptions created by the encapsulation device as they receive
+ICMP Fragmentation Needed and ICMPv6 Packet Too Big messages, and
+we already rebuild those messages with the appropriate MTU and route
+them back to the sender.
+
+Add the missing bits for bridged cases:
+
+- checks in skb_tunnel_check_pmtu() to understand if it's appropriate
+  to trigger a reply according to RFC 1122 section 3.2.2 for ICMP and
+  RFC 4443 section 2.4 for ICMPv6. This function is already called by
+  UDP tunnels
+
+- a new function generating those ICMP or ICMPv6 replies. We can't
+  reuse icmp_send() and icmp6_send() as we don't see the sender as a
+  valid destination. This doesn't need to be generic, as we don't
+  cover any other type of ICMP errors given that we only provide an
+  encapsulation function to the sender
+
+While at it, make the MTU check in skb_tunnel_check_pmtu() accurate:
+we might receive GSO buffers here, and the passed headroom already
+includes the inner MAC length, so we don't have to account for it
+a second time (that would imply three MAC headers on the wire, but
+there are just two).
+
+This issue became visible while bridging IPv6 packets with 4500 bytes
+of payload over GENEVE using IPv4 with a PMTU of 4000. Given the 50
+bytes of encapsulation headroom, we would advertise MTU as 3950, and
+we would reject fragmented IPv6 datagrams of 3958 bytes size on the
+wire. We're exclusively dealing with network MTU here, though, so we
+could get Ethernet frames up to 3964 octets in that case.
+
+v2:
+- moved skb_tunnel_check_pmtu() to ip_tunnel_core.c (David Ahern)
+- split IPv4/IPv6 functions (David Ahern)
+
+Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
+Reviewed-by: David Ahern <dsahern@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/include/net/ip_tunnels.h
++++ b/include/net/ip_tunnels.h
+@@ -279,6 +279,8 @@ int iptunnel_xmit(struct sock *sk, struc
+ 		  u8 tos, u8 ttl, __be16 df, bool xnet);
+ struct metadata_dst *iptunnel_metadata_reply(struct metadata_dst *md,
+ 					     gfp_t flags);
++int skb_tunnel_check_pmtu(struct sk_buff *skb, struct dst_entry *encap_dst,
++			  int headroom, bool reply);
+ 
+ struct sk_buff *iptunnel_handle_offloads(struct sk_buff *skb, bool gre_csum,
+ 					 int gso_type_mask);
+--- a/net/ipv4/ip_tunnel_core.c
++++ b/net/ipv4/ip_tunnel_core.c
+@@ -204,6 +204,252 @@ error:
+ }
+ EXPORT_SYMBOL_GPL(iptunnel_handle_offloads);
+ 
++/**
++ * iptunnel_pmtud_build_icmp() - Build ICMP error message for PMTUD
++ * @skb:	Original packet with L2 header
++ * @mtu:	MTU value for ICMP error
++ *
++ * Return: length on success, negative error code if message couldn't be built.
++ */
++static int iptunnel_pmtud_build_icmp(struct sk_buff *skb, int mtu)
++{
++	const struct iphdr *iph = ip_hdr(skb);
++	struct icmphdr *icmph;
++	struct iphdr *niph;
++	struct ethhdr eh;
++	int len, err;
++
++	if (!pskb_may_pull(skb, ETH_HLEN + sizeof(struct iphdr)))
++		return -EINVAL;
++
++	skb_copy_bits(skb, skb_mac_header(skb) - skb->data, &eh, ETH_HLEN);
++	pskb_pull(skb, ETH_HLEN);
++	skb_reset_network_header(skb);
++
++	err = pskb_trim(skb, 576 - sizeof(*niph) - sizeof(*icmph));
++	if (err)
++		return err;
++
++	len = skb->len + sizeof(*icmph);
++	err = skb_cow(skb, sizeof(*niph) + sizeof(*icmph) + ETH_HLEN);
++	if (err)
++		return err;
++
++	icmph = (struct icmphdr *)skb_push(skb, sizeof(*icmph));
++	*icmph = (struct icmphdr) {
++		.type			= ICMP_DEST_UNREACH,
++		.code			= ICMP_FRAG_NEEDED,
++		.checksum		= 0,
++		.un.frag.__unused	= 0,
++		.un.frag.mtu		= ntohs(mtu),
++	};
++	icmph->checksum = ip_compute_csum(icmph, len);
++	skb_reset_transport_header(skb);
++
++	niph = (struct iphdr *)skb_push(skb, sizeof(*niph));
++	*niph = (struct iphdr) {
++		.ihl			= sizeof(*niph) / 4u,
++		.version 		= 4,
++		.tos 			= 0,
++		.tot_len		= htons(len + sizeof(*niph)),
++		.id			= 0,
++		.frag_off		= htons(IP_DF),
++		.ttl			= iph->ttl,
++		.protocol		= IPPROTO_ICMP,
++		.saddr			= iph->daddr,
++		.daddr			= iph->saddr,
++	};
++	ip_send_check(niph);
++	skb_reset_network_header(skb);
++
++	skb->ip_summed = CHECKSUM_NONE;
++
++	eth_header(skb, skb->dev, htons(eh.h_proto), eh.h_source, eh.h_dest, 0);
++	skb_reset_mac_header(skb);
++
++	return skb->len;
++}
++
++/**
++ * iptunnel_pmtud_check_icmp() - Trigger ICMP reply if needed and allowed
++ * @skb:	Buffer being sent by encapsulation, L2 headers expected
++ * @mtu:	Network MTU for path
++ *
++ * Return: 0 for no ICMP reply, length if built, negative value on error.
++ */
++static int iptunnel_pmtud_check_icmp(struct sk_buff *skb, int mtu)
++{
++	const struct icmphdr *icmph = icmp_hdr(skb);
++	const struct iphdr *iph = ip_hdr(skb);
++
++	if (mtu <= 576 || iph->frag_off != htons(IP_DF))
++		return 0;
++
++	if (ipv4_is_lbcast(iph->daddr)  || ipv4_is_multicast(iph->daddr) ||
++	    ipv4_is_zeronet(iph->saddr) || ipv4_is_loopback(iph->saddr)  ||
++	    ipv4_is_lbcast(iph->saddr)  || ipv4_is_multicast(iph->saddr))
++		return 0;
++
++	if (iph->protocol == IPPROTO_ICMP && icmp_is_err(icmph->type))
++		return 0;
++
++	return iptunnel_pmtud_build_icmp(skb, mtu);
++}
++
++#if IS_ENABLED(CONFIG_IPV6)
++/**
++ * iptunnel_pmtud_build_icmpv6() - Build ICMPv6 error message for PMTUD
++ * @skb:	Original packet with L2 header
++ * @mtu:	MTU value for ICMPv6 error
++ *
++ * Return: length on success, negative error code if message couldn't be built.
++ */
++static int iptunnel_pmtud_build_icmpv6(struct sk_buff *skb, int mtu)
++{
++	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
++	struct icmp6hdr *icmp6h;
++	struct ipv6hdr *nip6h;
++	struct ethhdr eh;
++	int len, err;
++	__wsum csum;
++
++	if (!pskb_may_pull(skb, ETH_HLEN + sizeof(struct ipv6hdr)))
++		return -EINVAL;
++
++	skb_copy_bits(skb, skb_mac_header(skb) - skb->data, &eh, ETH_HLEN);
++	pskb_pull(skb, ETH_HLEN);
++	skb_reset_network_header(skb);
++
++	err = pskb_trim(skb, IPV6_MIN_MTU - sizeof(*nip6h) - sizeof(*icmp6h));
++	if (err)
++		return err;
++
++	len = skb->len + sizeof(*icmp6h);
++	err = skb_cow(skb, sizeof(*nip6h) + sizeof(*icmp6h) + ETH_HLEN);
++	if (err)
++		return err;
++
++	icmp6h = (struct icmp6hdr *)skb_push(skb, sizeof(*icmp6h));
++	*icmp6h = (struct icmp6hdr) {
++		.icmp6_type		= ICMPV6_PKT_TOOBIG,
++		.icmp6_code		= 0,
++		.icmp6_cksum		= 0,
++		.icmp6_mtu		= htonl(mtu),
++	};
++	skb_reset_transport_header(skb);
++
++	nip6h = (struct ipv6hdr *)skb_push(skb, sizeof(*nip6h));
++	*nip6h = (struct ipv6hdr) {
++		.priority		= 0,
++		.version		= 6,
++		.flow_lbl		= { 0 },
++		.payload_len		= htons(len),
++		.nexthdr		= IPPROTO_ICMPV6,
++		.hop_limit		= ip6h->hop_limit,
++		.saddr			= ip6h->daddr,
++		.daddr			= ip6h->saddr,
++	};
++	skb_reset_network_header(skb);
++
++	csum = csum_partial(icmp6h, len, 0);
++	icmp6h->icmp6_cksum = csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr, len,
++					      IPPROTO_ICMPV6, csum);
++
++	skb->ip_summed = CHECKSUM_NONE;
++
++	eth_header(skb, skb->dev, htons(eh.h_proto), eh.h_source, eh.h_dest, 0);
++	skb_reset_mac_header(skb);
++
++	return skb->len;
++}
++
++/**
++ * iptunnel_pmtud_check_icmpv6() - Trigger ICMPv6 reply if needed and allowed
++ * @skb:	Buffer being sent by encapsulation, L2 headers expected
++ * @mtu:	Network MTU for path
++ *
++ * Return: 0 for no ICMPv6 reply, length if built, negative value on error.
++ */
++static int iptunnel_pmtud_check_icmpv6(struct sk_buff *skb, int mtu)
++{
++	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
++	int stype = ipv6_addr_type(&ip6h->saddr);
++	u8 proto = ip6h->nexthdr;
++	__be16 frag_off;
++	int offset;
++
++	if (mtu <= IPV6_MIN_MTU)
++		return 0;
++
++	if (stype == IPV6_ADDR_ANY || stype == IPV6_ADDR_MULTICAST ||
++	    stype == IPV6_ADDR_LOOPBACK)
++		return 0;
++
++	offset = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &proto,
++				  &frag_off);
++	if (offset < 0 || (frag_off & htons(~0x7)))
++		return 0;
++
++	if (proto == IPPROTO_ICMPV6) {
++		struct icmp6hdr *icmp6h;
++
++		if (!pskb_may_pull(skb, skb_network_header(skb) +
++					offset + 1 - skb->data))
++			return 0;
++
++		icmp6h = (struct icmp6hdr *)(skb_network_header(skb) + offset);
++		if (icmpv6_is_err(icmp6h->icmp6_type) ||
++		    icmp6h->icmp6_type == NDISC_REDIRECT)
++			return 0;
++	}
++
++	return iptunnel_pmtud_build_icmpv6(skb, mtu);
++}
++#endif /* IS_ENABLED(CONFIG_IPV6) */
++
++/**
++ * skb_tunnel_check_pmtu() - Check, update PMTU and trigger ICMP reply as needed
++ * @skb:	Buffer being sent by encapsulation, L2 headers expected
++ * @encap_dst:	Destination for tunnel encapsulation (outer IP)
++ * @headroom:	Encapsulation header size, bytes
++ * @reply:	Build matching ICMP or ICMPv6 message as a result
++ *
++ * L2 tunnel implementations that can carry IP and can be directly bridged
++ * (currently UDP tunnels) can't always rely on IP forwarding paths to handle
++ * PMTU discovery. In the bridged case, ICMP or ICMPv6 messages need to be built
++ * based on payload and sent back by the encapsulation itself.
++ *
++ * For routable interfaces, we just need to update the PMTU for the destination.
++ *
++ * Return: 0 if ICMP error not needed, length if built, negative value on error
++ */
++int skb_tunnel_check_pmtu(struct sk_buff *skb, struct dst_entry *encap_dst,
++			  int headroom, bool reply)
++{
++	struct dst_entry *dst = skb_dst(skb);
++	u32 mtu = dst_mtu(encap_dst) - headroom;
++
++	if ((skb_is_gso(skb) && skb_gso_network_seglen(skb) <= mtu) ||
++	    (!skb_is_gso(skb) && (skb->len - skb_mac_header_len(skb)) <= mtu))
++		return 0;
++
++	if (dst && dst->ops->update_pmtu)
++		dst->ops->update_pmtu(dst, NULL, skb, mtu);
++
++	if (!reply || skb->pkt_type == PACKET_HOST)
++		return 0;
++
++	if (skb->protocol == htons(ETH_P_IP))
++		return iptunnel_pmtud_check_icmp(skb, mtu);
++
++#if IS_ENABLED(CONFIG_IPV6)
++	if (skb->protocol == htons(ETH_P_IPV6))
++		return iptunnel_pmtud_check_icmpv6(skb, mtu);
++#endif
++	return 0;
++}
++EXPORT_SYMBOL(skb_tunnel_check_pmtu);
++
+ /* Often modified stats are per cpu, other are shared (netdev->stats) */
+ struct rtnl_link_stats64 *ip_tunnel_get_stats64(struct net_device *dev,
+ 						struct rtnl_link_stats64 *tot)
+--- a/drivers/net/vxlan.c
++++ b/drivers/net/vxlan.c
+@@ -2076,6 +2076,8 @@ static void vxlan_xmit_one(struct sk_buf
+ 		/* Reset the skb_iif to Tunnels interface index */
+ 		skb->skb_iif = dev->ifindex;
+ 
++		skb_tunnel_check_pmtu(skb, &rt->dst, VXLAN_HEADROOM, false);
++
+ 		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
+ 		ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
+ 		err = vxlan_xmit_skb(rt, sk, skb, fl4.saddr,
+@@ -2141,6 +2143,8 @@ static void vxlan_xmit_one(struct sk_buf
+ 				flags |= VXLAN_F_UDP_ZERO_CSUM6_TX;
+ 		}
+ 
++		skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM, false);
++
+ 		ttl = ttl ? : ip6_dst_hoplimit(ndst);
+ 		err = vxlan6_xmit_skb(ndst, sk, skb, dev, &saddr, &dst->sin6.sin6_addr,
+ 				      0, ttl, src_port, dst_port, htonl(vni << 8), md,

feeds/ipq807x/ipq807x/patches/233-vxlan-simplify-RTF_LOCAL-handling.patch

@@ -0,0 +1,114 @@
+From: pravin shelar <pshelar@ovn.org>
+Date: Sun, 13 Nov 2016 20:43:56 -0800
+Subject: [PATCH] vxlan: simplify RTF_LOCAL handling.
+
+Avoid code duplicate code for handling RTF_LOCAL routes.
+
+Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
+Acked-by: Jiri Benc <jbenc@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/vxlan.c
++++ b/drivers/net/vxlan.c
+@@ -1946,6 +1946,40 @@ static void vxlan_encap_bypass(struct sk
+ 	}
+ }
+ 
++static int encap_bypass_if_local(struct sk_buff *skb, struct net_device *dev,
++				 struct vxlan_dev *vxlan, union vxlan_addr *daddr,
++				 __be32 dst_port, __be32 vni, struct dst_entry *dst,
++				 u32 rt_flags)
++{
++#if IS_ENABLED(CONFIG_IPV6)
++	/* IPv6 rt-flags are checked against RTF_LOCAL, but the value of
++	 * RTF_LOCAL is equal to RTCF_LOCAL. So to keep code simple
++	 * we can use RTCF_LOCAL which works for ipv4 and ipv6 route entry.
++	 */
++	BUILD_BUG_ON(RTCF_LOCAL != RTF_LOCAL);
++#endif
++	/* Bypass encapsulation if the destination is local */
++	if (rt_flags & RTCF_LOCAL &&
++	    !(rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) {
++		struct vxlan_dev *dst_vxlan;
++
++		dst_release(dst);
++		dst_vxlan = vxlan_find_vni(vxlan->net, vni,
++					   daddr->sa.sa_family, dst_port,
++					   vxlan->flags);
++		if (!dst_vxlan) {
++			dev->stats.tx_errors++;
++			kfree_skb(skb);
++
++			return -ENOENT;
++		}
++		vxlan_encap_bypass(skb, vxlan, dst_vxlan);
++		return 1;
++	}
++
++	return 0;
++}
++
+ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev,
+ 			   struct vxlan_rdst *rdst, bool did_rsc)
+ {
+@@ -2059,18 +2093,12 @@ static void vxlan_xmit_one(struct sk_buf
+ 		}
+ 
+ 		/* Bypass encapsulation if the destination is local */
+-		if (rt->rt_flags & RTCF_LOCAL &&
+-		    !(rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) {
+-			struct vxlan_dev *dst_vxlan;
+-
+-			ip_rt_put(rt);
+-			dst_vxlan = vxlan_find_vni(vxlan->net, vni,
+-						   dst->sa.sa_family, dst_port,
+-						   vxlan->flags);
+-			if (!dst_vxlan)
+-				goto tx_error;
+-			vxlan_encap_bypass(skb, vxlan, dst_vxlan);
+-			return;
++		if (!info) {
++			err = encap_bypass_if_local(skb, dev, vxlan, dst,
++						    dst_port, vni, &rt->dst,
++						    rt->rt_flags);
++			if (err)
++				return;
+ 		}
+ 
+ 		/* Reset the skb_iif to Tunnels interface index */
+@@ -2096,7 +2124,6 @@ static void vxlan_xmit_one(struct sk_buf
+ 	} else {
+ 		struct dst_entry *ndst;
+ 		struct in6_addr saddr;
+-		u32 rt6i_flags;
+ 
+ 		if (!vxlan->vn6_sock)
+ 			goto drop;
+@@ -2121,19 +2148,14 @@ static void vxlan_xmit_one(struct sk_buf
+ 		}
+ 
+ 		/* Bypass encapsulation if the destination is local */
+-		rt6i_flags = ((struct rt6_info *)ndst)->rt6i_flags;
+-		if (rt6i_flags & RTF_LOCAL &&
+-		    !(rt6i_flags & (RTCF_BROADCAST | RTCF_MULTICAST))) {
+-			struct vxlan_dev *dst_vxlan;
++		if (!info) {
++			u32 rt6i_flags = ((struct rt6_info *)ndst)->rt6i_flags;
+ 
+-			dst_release(ndst);
+-			dst_vxlan = vxlan_find_vni(vxlan->net, vni,
+-						   dst->sa.sa_family, dst_port,
+-						   vxlan->flags);
+-			if (!dst_vxlan)
+-				goto tx_error;
+-			vxlan_encap_bypass(skb, vxlan, dst_vxlan);
+-			return;
++			err = encap_bypass_if_local(skb, dev, vxlan, dst,
++						    dst_port, vni, ndst,
++						    rt6i_flags);
++			if (err)
++				return;
+ 		}
+ 
+ 		if (info) {

feeds/ipq807x/ipq807x/patches/234-vxlan-Support-for-PMTU-discovery-on-directly-bridged.patch

@@ -0,0 +1,140 @@
+From: Stefano Brivio <sbrivio@redhat.com>
+Date: Tue, 4 Aug 2020 07:53:44 +0200
+Subject: [PATCH] vxlan: Support for PMTU discovery on directly bridged links
+
+If the interface is a bridge or Open vSwitch port, and we can't
+forward a packet because it exceeds the local PMTU estimate,
+trigger an ICMP or ICMPv6 reply to the sender, using the same
+interface to forward it back.
+
+If metadata collection is enabled, reverse destination and source
+addresses, so that Open vSwitch is able to match this packet against
+the existing, reverse flow.
+
+v2: Use netif_is_any_bridge_port() (David Ahern)
+
+Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/vxlan.c
++++ b/drivers/net/vxlan.c
+@@ -1903,7 +1903,7 @@ static struct dst_entry *vxlan6_get_rout
+ 
+ /* Bypass encapsulation if the destination is local */
+ static void vxlan_encap_bypass(struct sk_buff *skb, struct vxlan_dev *src_vxlan,
+-			       struct vxlan_dev *dst_vxlan)
++			       struct vxlan_dev *dst_vxlan, bool snoop)
+ {
+ 	struct pcpu_sw_netstats *tx_stats, *rx_stats;
+ 	union vxlan_addr loopback;
+@@ -1928,7 +1928,7 @@ static void vxlan_encap_bypass(struct sk
+ #endif
+ 	}
+ 
+-	if (dst_vxlan->flags & VXLAN_F_LEARN)
++	if ((dst_vxlan->flags & VXLAN_F_LEARN) && snoop)
+ 		vxlan_snoop(skb->dev, &loopback, eth_hdr(skb)->h_source);
+ 
+ 	u64_stats_update_begin(&tx_stats->syncp);
+@@ -1973,7 +1973,7 @@ static int encap_bypass_if_local(struct
+ 
+ 			return -ENOENT;
+ 		}
+-		vxlan_encap_bypass(skb, vxlan, dst_vxlan);
++		vxlan_encap_bypass(skb, vxlan, dst_vxlan, true);
+ 		return 1;
+ 	}
+ 
+@@ -1990,7 +1990,7 @@ static void vxlan_xmit_one(struct sk_buf
+ 	const struct iphdr *old_iph;
+ 	struct flowi4 fl4;
+ 	union vxlan_addr *dst;
+-	union vxlan_addr remote_ip;
++	union vxlan_addr remote_ip, local_ip;
+ 	struct vxlan_metadata _md;
+ 	struct vxlan_metadata *md = &_md;
+ 	__be16 src_port = 0, dst_port;
+@@ -2006,6 +2006,7 @@ static void vxlan_xmit_one(struct sk_buf
+ 		dst_port = rdst->remote_port ? rdst->remote_port : vxlan->cfg.dst_port;
+ 		vni = rdst->remote_vni;
+ 		dst = &rdst->remote_ip;
++		local_ip = vxlan->cfg.saddr;
+ 	} else {
+ 		if (!info) {
+ 			WARN_ONCE(1, "%s: Missing encapsulation instructions\n",
+@@ -2015,17 +2016,20 @@ static void vxlan_xmit_one(struct sk_buf
+ 		dst_port = info->key.tp_dst ? : vxlan->cfg.dst_port;
+ 		vni = be64_to_cpu(info->key.tun_id);
+ 		remote_ip.sa.sa_family = ip_tunnel_info_af(info);
+-		if (remote_ip.sa.sa_family == AF_INET)
++		if (remote_ip.sa.sa_family == AF_INET) {
+ 			remote_ip.sin.sin_addr.s_addr = info->key.u.ipv4.dst;
+-		else
++			local_ip.sin.sin_addr.s_addr = info->key.u.ipv4.src;
++		} else {
+ 			remote_ip.sin6.sin6_addr = info->key.u.ipv6.dst;
++			local_ip.sin6.sin6_addr = info->key.u.ipv6.src;
++		}
+ 		dst = &remote_ip;
+ 	}
+ 
+ 	if (vxlan_addr_any(dst)) {
+ 		if (did_rsc) {
+ 			/* short-circuited back to local bridge */
+-			vxlan_encap_bypass(skb, vxlan, vxlan);
++			vxlan_encap_bypass(skb, vxlan, vxlan, true);
+ 			return;
+ 		}
+ 		goto drop;
+@@ -2104,7 +2108,23 @@ static void vxlan_xmit_one(struct sk_buf
+ 		/* Reset the skb_iif to Tunnels interface index */
+ 		skb->skb_iif = dev->ifindex;
+ 
+-		skb_tunnel_check_pmtu(skb, &rt->dst, VXLAN_HEADROOM, false);
++		err = skb_tunnel_check_pmtu(skb, &rt->dst, VXLAN_HEADROOM,
++					    netif_is_any_bridge_port(dev));
++		if (err < 0) {
++			goto tx_error;
++		} else if (err) {
++			if (info) {
++				struct in_addr src, dst;
++
++				src = remote_ip.sin.sin_addr;
++				dst = local_ip.sin.sin_addr;
++				info->key.u.ipv4.src = src.s_addr;
++				info->key.u.ipv4.dst = dst.s_addr;
++			}
++			vxlan_encap_bypass(skb, vxlan, vxlan, false);
++			ip_rt_put(rt);
++			return;
++		}
+ 
+ 		tos = ip_tunnel_ecn_encap(tos, old_iph, skb);
+ 		ttl = ttl ? : ip4_dst_hoplimit(&rt->dst);
+@@ -2165,7 +2185,24 @@ static void vxlan_xmit_one(struct sk_buf
+ 				flags |= VXLAN_F_UDP_ZERO_CSUM6_TX;
+ 		}
+ 
+-		skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM, false);
++		err = skb_tunnel_check_pmtu(skb, ndst, VXLAN6_HEADROOM,
++					    netif_is_any_bridge_port(dev));
++		if (err < 0) {
++			goto tx_error;
++		} else if (err) {
++			if (info) {
++				struct in6_addr src, dst;
++
++				src = remote_ip.sin6.sin6_addr;
++				dst = local_ip.sin6.sin6_addr;
++				info->key.u.ipv6.src = src;
++				info->key.u.ipv6.dst = dst;
++			}
++
++			vxlan_encap_bypass(skb, vxlan, vxlan, false);
++			ip_rt_put(rt);
++			return;
++		}
+ 
+ 		ttl = ttl ? : ip6_dst_hoplimit(ndst);
+ 		err = vxlan6_xmit_skb(ndst, sk, skb, dev, &saddr, &dst->sin6.sin6_addr,

feeds/ipq807x/ipq807x/patches/235-generic-Fix-per-interface-nf_call_iptables-setting.patch

@@ -0,0 +1,234 @@
+From: Sven Eckelmann <sven@open-mesh.com>
+Date: Wed, 2 Sep 2015 19:47:43 +0200
+Subject: generic: Fix per interface nf_call_iptables setting
+
+commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that
+functionality have been disabled - eliminates the overhead of enabling
+CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization
+which should reduce/eliminate the overhead for traffic send over bridges on
+kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization
+breaks the nf_call_iptables per bridge setting which is more fine grained
+than the global sysctl net.bridge.bridge-nf-call-iptables setting.
+
+A test reflecting a real world setup was created to identify if this really
+eliminates the overhead and if per-bridge nf_call_iptables could be used in
+some setups to increase the throughput. A Qualcomm Atheros QCA9558 based
+system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used.
+Cables from the AP to the wifi station were used to reduce interference
+problems during the tests.
+
+The wlan interface was put in one bridge interface called br-wlan. This
+bridge usually contains some more wlan interfaces. The eth0 was put in a
+second bridge called br-lan. This usually contains some other privileged
+wlan or mesh interfaces. Routing was added between br-lan and br-wlan.
+
+Three kernels were tested:
+
+ * (default) OpenWrt kernel for this device
+ * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y
+ * (brfilter-local)  OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and
+    without 644-bridge_optimize_netfilter_hooks.patch
+
+The changes to the the netfilter settings of the bridge were done via:
+
+ * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1
+ * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables
+   and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables
+
+A station connected to the wlan0 (AP) interface was used to send traffic to
+a PC connected via ethernet. iperf with 3 concurrent transmissions was used
+to generate the traffic.
+
+| kernel          | br-nf-* global | nf-call* iface | download | upload   |
+|-----------------|----------------|----------------|----------|----------|
+| default         | 0              | -              |      209 |      268 |
+| brfilter-global | 0              | -              |      185 |      243 |
+| brfilter-local  | 0              | -              |      187 |      243 |
+| brfilter-local  | 0              | br-lan         |      157 |      226 |
+| brfilter-local  | 0              | br-lan br-wlan |      139 |      161 |
+| brfilter-global | 1              | -              |      136 |      162 |
+
+Download/upload results in Mibit/s
+
+It can be seen that the patch doesn't eliminate the overhead. It can also
+be seen that the throughput of brfilter-global and brfilter-local with
+disabled filtering is the roughly the same. Also the throughput for
+brfilter-global and brfilter-local for enabled filtering on all bridges is
+roughly the same.
+
+But also the brfilter-local throughput is higher when only br-lan requires
+the filtering. This setting would not be possible with
+644-bridge_optimize_netfilter_hooks.patch applied and thus can only be
+compared with brfilter-global and filtering enabled for all interfaces.
+
+Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
+
+Forwarded: https://patchwork.ozlabs.org/patch/513592/
+Applied-Upstream: https://dev.openwrt.org/changeset/46835
+
+--- a/net/bridge/br_forward.c
++++ b/net/bridge/br_forward.c
+@@ -69,7 +69,7 @@ EXPORT_SYMBOL_GPL(br_dev_queue_push_xmit
+ 
+ int br_forward_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
+ {
+-	return BR_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING,
++	return NF_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING,
+ 		       net, sk, skb, NULL, skb->dev,
+ 		       br_dev_queue_push_xmit);
+ 
+@@ -97,7 +97,7 @@ static void __br_deliver(const struct ne
+ 		return;
+ 	}
+ 
+-	BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
++	NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
+ 		dev_net(skb->dev), NULL, skb,NULL, skb->dev,
+ 		br_forward_finish);
+ }
+@@ -121,7 +121,7 @@ static void __br_forward(const struct ne
+ 	skb->dev = to->dev;
+ 	skb_forward_csum(skb);
+ 
+-	BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,
++	NF_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,
+ 		dev_net(indev), NULL, skb, indev, skb->dev,
+ 		br_forward_finish);
+ }
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -70,7 +70,7 @@ int br_pass_frame_up(struct sk_buff *skb
+ 	if (!skb)
+ 		return NET_RX_DROP;
+ 
+-	return BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
++	return NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
+ 		       dev_net(indev), NULL, skb, indev, NULL,
+ 		       br_netif_receive_skb);
+ }
+@@ -320,7 +320,7 @@ rx_handler_result_t br_handle_frame(stru
+ 		}
+ 
+ 		/* Deliver packet to local host only */
+-		if (BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
++		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
+ 			    dev_net(skb->dev), NULL, skb, skb->dev, NULL,
+ 			    br_handle_local_finish)) {
+ 			return RX_HANDLER_CONSUMED; /* consumed by filter */
+@@ -337,7 +337,7 @@ forward:
+ 			if (ether_addr_equal(p->br->dev->dev_addr, dest))
+ 				skb->pkt_type = PACKET_HOST;
+ 
+-			if (BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, dev_net(skb->dev), NULL,
++			if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, dev_net(skb->dev), NULL,
+ 				skb, skb->dev, NULL, br_handle_local_finish))
+ 				break;
+ 
+@@ -361,7 +361,7 @@ forward:
+ 		if (ether_addr_equal(p->br->dev->dev_addr, dest))
+ 			skb->pkt_type = PACKET_HOST;
+ 
+-		BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
++		NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
+ 			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
+ 			br_handle_frame_finish);
+ 		break;
+--- a/net/bridge/br_multicast.c
++++ b/net/bridge/br_multicast.c
+@@ -856,7 +856,7 @@ static void __br_multicast_send_query(st
+ 
+ 	if (port) {
+ 		skb->dev = port->dev;
+-		BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
++		NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
+ 			dev_net(port->dev), NULL, skb, NULL, skb->dev,
+ 			br_dev_queue_push_xmit);
+ 	} else {
+--- a/net/bridge/br_netfilter_hooks.c
++++ b/net/bridge/br_netfilter_hooks.c
+@@ -72,15 +72,6 @@ static int brnf_pass_vlan_indev __read_m
+ #define IS_ARP(skb) \
+ 	(!skb_vlan_tag_present(skb) && skb->protocol == htons(ETH_P_ARP))
+ 
+-int brnf_call_ebtables __read_mostly;
+-EXPORT_SYMBOL_GPL(brnf_call_ebtables);
+-
+-bool br_netfilter_run_hooks(void)
+-{
+-	return brnf_call_iptables | brnf_call_ip6tables | brnf_call_arptables |
+-		brnf_call_ebtables | brnf_call_custom;
+-}
+-
+ static inline __be16 vlan_proto(const struct sk_buff *skb)
+ {
+ 	if (skb_vlan_tag_present(skb))
+--- a/net/bridge/br_private.h
++++ b/net/bridge/br_private.h
+@@ -909,29 +909,15 @@ extern const struct nf_br_ops __rcu *nf_
+ 
+ /* br_netfilter.c */
+ #if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
+-extern int brnf_call_ebtables;
+ int br_nf_core_init(void);
+ void br_nf_core_fini(void);
+ void br_netfilter_rtable_init(struct net_bridge *);
+-bool br_netfilter_run_hooks(void);
+ #else
+ static inline int br_nf_core_init(void) { return 0; }
+ static inline void br_nf_core_fini(void) {}
+ #define br_netfilter_rtable_init(x)
+-#define br_netfilter_run_hooks()	false
+ #endif
+ 
+-static inline int
+-BR_HOOK(uint8_t pf, unsigned int hook, struct net *net, struct sock *sk,
+-	struct sk_buff *skb, struct net_device *in, struct net_device *out,
+-	int (*okfn)(struct net *, struct sock *, struct sk_buff *))
+-{
+-	if (!br_netfilter_run_hooks())
+-		return okfn(net, sk, skb);
+-
+-	return NF_HOOK(pf, hook, net, sk, skb, in, out, okfn);
+-}
+-
+ /* br_stp.c */
+ void br_log_state(const struct net_bridge_port *p);
+ void br_set_state(struct net_bridge_port *p, unsigned int state);
+--- a/net/bridge/br_stp_bpdu.c
++++ b/net/bridge/br_stp_bpdu.c
+@@ -60,7 +60,7 @@ static void br_send_bpdu(struct net_brid
+ 
+ 	skb_reset_mac_header(skb);
+ 
+-	BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
++	NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT,
+ 		dev_net(p->dev), NULL, skb, NULL, skb->dev,
+ 		br_send_bpdu_finish);
+ }
+--- a/net/bridge/netfilter/ebtables.c
++++ b/net/bridge/netfilter/ebtables.c
+@@ -2416,13 +2416,11 @@ static int __init ebtables_init(void)
+ 	}
+ 
+ 	printk(KERN_INFO "Ebtables v2.0 registered\n");
+-	brnf_call_ebtables = 1;
+ 	return 0;
+ }
+ 
+ static void __exit ebtables_fini(void)
+ {
+-	brnf_call_ebtables = 0;
+ 	nf_unregister_sockopt(&ebt_sockopts);
+ 	xt_unregister_target(&ebt_standard_target);
+ 	printk(KERN_INFO "Ebtables v2.0 unregistered\n");
+--- a/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
++++ b/net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
+@@ -310,7 +310,7 @@ nf_nat_ipv4_fn(void *priv, struct sk_buf
+ 		 * nf_bridge will be set and nf_bridge->physoutdev is not null,
+ 		 * We can assume that it is not expecting NAT operation.
+ 		 *
+-		 * when BR_HOOK is enabled, multicast packets will reach
++		 * when NF_HOOK is enabled, multicast packets will reach
+ 		 * postrouting twice,the first time is when it is forwarded
+ 		 * between ports of a bridge, the second time is that it is
+ 		 * forwarded to upstream port.

feeds/ipq807x/ipq807x/patches/800-GPIO-add-named-gpio-exports.patch

@@ -0,0 +1,162 @@
+From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 30/36] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -23,6 +23,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+ 
+ #include "gpiolib.h"
+ 
+@@ -450,3 +452,72 @@ void of_gpiochip_remove(struct gpio_chip
+ 	gpiochip_remove_pin_ranges(chip);
+ 	of_node_put(chip->of_node);
+ }
++
++#ifdef CONFIG_GPIO_SYSFS
++
++static struct of_device_id gpio_export_ids[] = {
++	{ .compatible = "gpio-export" },
++	{ /* sentinel */ }
++};
++
++static int of_gpio_export_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct device_node *cnp;
++	u32 val;
++	int nb = 0;
++
++	for_each_child_of_node(np, cnp) {
++		const char *name = NULL;
++		int gpio;
++		bool dmc;
++		int max_gpio = 1;
++		int i;
++
++		of_property_read_string(cnp, "gpio-export,name", &name);
++
++		if (!name)
++			max_gpio = of_gpio_count(cnp);
++
++		for (i = 0; i < max_gpio; i++) {
++			unsigned flags = 0;
++			enum of_gpio_flags of_flags;
++
++			gpio = of_get_gpio_flags(cnp, i, &of_flags);
++			if (!gpio_is_valid(gpio))
++				return gpio;
++
++			if (of_flags == OF_GPIO_ACTIVE_LOW)
++				flags |= GPIOF_ACTIVE_LOW;
++
++			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++			else
++				flags |= GPIOF_IN;
++
++			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++				continue;
++
++			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++			gpio_export_with_name(gpio, dmc, name);
++			nb++;
++		}
++	}
++
++	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++	return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++	.driver		= {
++		.name		= "gpio-export",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(gpio_export_ids),
++	},
++	.probe		= of_gpio_export_probe,
++};
++
++module_platform_driver(gpio_export_driver);
++
++#endif
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g
+ 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+ 
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ 				   unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
+ 
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+ 
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ 		      struct gpio_desc *desc);
+@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
+ 
+ #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+ 
++static inline int _gpiod_export(struct gpio_desc *desc,
++			       bool direction_may_change,
++			       const char *name)
++{
++	return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ 			       bool direction_may_change)
+ {
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -544,7 +544,7 @@ static struct class gpio_class = {
+  *
+  * Returns zero on success, else an error.
+  */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ 	struct gpio_chip	*chip;
+ 	struct gpiod_data	*data;
+@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc,
+ 	offset = gpio_chip_hwgpio(desc);
+ 	if (chip->names && chip->names[offset])
+ 		ioname = chip->names[offset];
++	if (name)
++		ioname = name;
+ 
+ 	dev = device_create_with_groups(&gpio_class, chip->dev,
+ 					MKDEV(0, 0), data, gpio_groups,
+@@ -625,6 +627,12 @@ err_unlock:
+ 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ 	return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++	return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+ 
+ static int match_export(struct device *dev, const void *desc)

feeds/ipq807x/ipq807x/patches/801-v4.9-Bluetooth-Fix-using-the-correct-source-address-type.patch

@@ -0,0 +1,131 @@
+From 39385cb5f3274735b03ed1f8e7ff517b02a0beed Mon Sep 17 00:00:00 2001
+From: Johan Hedberg <johan.hedberg@intel.com>
+Date: Sat, 12 Nov 2016 17:03:07 +0200
+Subject: [PATCH] Bluetooth: Fix using the correct source address type
+
+The hci_get_route() API is used to look up local HCI devices, however
+so far it has been incapable of dealing with anything else than the
+public address of HCI devices. This completely breaks with LE-only HCI
+devices that do not come with a public address, but use a static
+random address instead.
+
+This patch exteds the hci_get_route() API with a src_type parameter
+that's used for comparing with the right address of each HCI device.
+
+Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
+Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
+---
+ include/net/bluetooth/hci_core.h |  2 +-
+ net/bluetooth/6lowpan.c          |  4 ++--
+ net/bluetooth/hci_conn.c         | 26 ++++++++++++++++++++++++--
+ net/bluetooth/l2cap_core.c       |  2 +-
+ net/bluetooth/rfcomm/tty.c       |  2 +-
+ net/bluetooth/sco.c              |  2 +-
+ 6 files changed, 30 insertions(+), 8 deletions(-)
+
+--- a/include/net/bluetooth/hci_core.h
++++ b/include/net/bluetooth/hci_core.h
+@@ -1003,7 +1003,7 @@ static inline void hci_set_drvdata(struc
+ }
+ 
+ struct hci_dev *hci_dev_get(int index);
+-struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src);
++struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, u8 src_type);
+ 
+ struct hci_dev *hci_alloc_dev(void);
+ void hci_free_dev(struct hci_dev *hdev);
+--- a/net/bluetooth/6lowpan.c
++++ b/net/bluetooth/6lowpan.c
+@@ -1102,7 +1102,6 @@ static int get_l2cap_conn(char *buf, bda
+ {
+ 	struct hci_conn *hcon;
+ 	struct hci_dev *hdev;
+-	bdaddr_t *src = BDADDR_ANY;
+ 	int n;
+ 
+ 	n = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx %hhu",
+@@ -1113,7 +1112,8 @@ static int get_l2cap_conn(char *buf, bda
+ 	if (n < 7)
+ 		return -EINVAL;
+ 
+-	hdev = hci_get_route(addr, src);
++	/* The LE_PUBLIC address type is ignored because of BDADDR_ANY */
++	hdev = hci_get_route(addr, BDADDR_ANY, BDADDR_LE_PUBLIC);
+ 	if (!hdev)
+ 		return -ENOENT;
+ 
+--- a/net/bluetooth/hci_conn.c
++++ b/net/bluetooth/hci_conn.c
+@@ -609,7 +609,7 @@ int hci_conn_del(struct hci_conn *conn)
+ 	return 0;
+ }
+ 
+-struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src)
++struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, uint8_t src_type)
+ {
+ 	int use_src = bacmp(src, BDADDR_ANY);
+ 	struct hci_dev *hdev = NULL, *d;
+@@ -630,7 +630,29 @@ struct hci_dev *hci_get_route(bdaddr_t *
+ 		 */
+ 
+ 		if (use_src) {
+-			if (!bacmp(&d->bdaddr, src)) {
++			bdaddr_t id_addr;
++			u8 id_addr_type;
++
++			if (src_type == BDADDR_BREDR) {
++				if (!lmp_bredr_capable(d))
++					continue;
++				bacpy(&id_addr, &d->bdaddr);
++				id_addr_type = BDADDR_BREDR;
++			} else {
++				if (!lmp_le_capable(d))
++					continue;
++
++				hci_copy_identity_address(d, &id_addr,
++							  &id_addr_type);
++
++				/* Convert from HCI to three-value type */
++				if (id_addr_type == ADDR_LE_DEV_PUBLIC)
++					id_addr_type = BDADDR_LE_PUBLIC;
++				else
++					id_addr_type = BDADDR_LE_RANDOM;
++			}
++
++			if (!bacmp(&id_addr, src) && id_addr_type == src_type) {
+ 				hdev = d; break;
+ 			}
+ 		} else {
+--- a/net/bluetooth/l2cap_core.c
++++ b/net/bluetooth/l2cap_core.c
+@@ -7044,7 +7044,7 @@ int l2cap_chan_connect(struct l2cap_chan
+ 	BT_DBG("%pMR -> %pMR (type %u) psm 0x%2.2x", &chan->src, dst,
+ 	       dst_type, __le16_to_cpu(psm));
+ 
+-	hdev = hci_get_route(dst, &chan->src);
++	hdev = hci_get_route(dst, &chan->src, chan->src_type);
+ 	if (!hdev)
+ 		return -EHOSTUNREACH;
+ 
+--- a/net/bluetooth/rfcomm/tty.c
++++ b/net/bluetooth/rfcomm/tty.c
+@@ -178,7 +178,7 @@ static void rfcomm_reparent_device(struc
+ 	struct hci_dev *hdev;
+ 	struct hci_conn *conn;
+ 
+-	hdev = hci_get_route(&dev->dst, &dev->src);
++	hdev = hci_get_route(&dev->dst, &dev->src, BDADDR_BREDR);
+ 	if (!hdev)
+ 		return;
+ 
+--- a/net/bluetooth/sco.c
++++ b/net/bluetooth/sco.c
+@@ -219,7 +219,7 @@ static int sco_connect(struct sock *sk)
+ 
+ 	BT_DBG("%pMR -> %pMR", &sco_pi(sk)->src, &sco_pi(sk)->dst);
+ 
+-	hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src);
++	hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src, BDADDR_BREDR);
+ 	if (!hdev)
+ 		return -EHOSTUNREACH;
+